| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |  * MFD core driver for the Maxim MAX77843 | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2015 Samsung Electronics | 
 | 5 |  * Author: Jaewon Kim <jaewon02.kim@samsung.com> | 
 | 6 |  * Author: Beomho Seo <beomho.seo@samsung.com> | 
 | 7 |  * | 
 | 8 |  * This program is free software; you can redistribute it and/or modify | 
 | 9 |  * it under the terms of the GNU General Public License as published by | 
 | 10 |  * the Free Software Foundation; either version 2 of the License, or | 
 | 11 |  * (at your option) any later version. | 
 | 12 |  */ | 
 | 13 |  | 
 | 14 | #include <linux/err.h> | 
 | 15 | #include <linux/i2c.h> | 
 | 16 | #include <linux/init.h> | 
 | 17 | #include <linux/interrupt.h> | 
 | 18 | #include <linux/mfd/core.h> | 
 | 19 | #include <linux/mfd/max77693-common.h> | 
 | 20 | #include <linux/mfd/max77843-private.h> | 
 | 21 | #include <linux/of_device.h> | 
 | 22 | #include <linux/platform_device.h> | 
 | 23 |  | 
 | 24 | static const struct mfd_cell max77843_devs[] = { | 
 | 25 | 	{ | 
 | 26 | 		.name = "max77843-muic", | 
 | 27 | 		.of_compatible = "maxim,max77843-muic", | 
 | 28 | 	}, { | 
 | 29 | 		.name = "max77843-regulator", | 
 | 30 | 		.of_compatible = "maxim,max77843-regulator", | 
 | 31 | 	}, { | 
 | 32 | 		.name = "max77843-charger", | 
 | 33 | 		.of_compatible = "maxim,max77843-charger" | 
 | 34 | 	}, { | 
 | 35 | 		.name = "max77843-fuelgauge", | 
 | 36 | 		.of_compatible = "maxim,max77843-fuelgauge", | 
 | 37 | 	}, { | 
 | 38 | 		.name = "max77843-haptic", | 
 | 39 | 		.of_compatible = "maxim,max77843-haptic", | 
 | 40 | 	}, | 
 | 41 | }; | 
 | 42 |  | 
 | 43 | static const struct regmap_config max77843_charger_regmap_config = { | 
 | 44 | 	.reg_bits	= 8, | 
 | 45 | 	.val_bits	= 8, | 
 | 46 | 	.max_register	= MAX77843_CHG_REG_END, | 
 | 47 | }; | 
 | 48 |  | 
 | 49 | static const struct regmap_config max77843_regmap_config = { | 
 | 50 | 	.reg_bits	= 8, | 
 | 51 | 	.val_bits	= 8, | 
 | 52 | 	.max_register	= MAX77843_SYS_REG_END, | 
 | 53 | }; | 
 | 54 |  | 
 | 55 | static const struct regmap_irq max77843_irqs[] = { | 
 | 56 | 	/* TOPSYS interrupts */ | 
 | 57 | 	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, }, | 
 | 58 | 	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, }, | 
 | 59 | 	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, }, | 
 | 60 | 	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, }, | 
 | 61 | }; | 
 | 62 |  | 
 | 63 | static const struct regmap_irq_chip max77843_irq_chip = { | 
 | 64 | 	.name		= "max77843", | 
 | 65 | 	.status_base	= MAX77843_SYS_REG_SYSINTSRC, | 
 | 66 | 	.mask_base	= MAX77843_SYS_REG_SYSINTMASK, | 
 | 67 | 	.mask_invert	= false, | 
 | 68 | 	.num_regs	= 1, | 
 | 69 | 	.irqs		= max77843_irqs, | 
 | 70 | 	.num_irqs	= ARRAY_SIZE(max77843_irqs), | 
 | 71 | }; | 
 | 72 |  | 
 | 73 | /* Charger and Charger regulator use same regmap. */ | 
 | 74 | static int max77843_chg_init(struct max77693_dev *max77843) | 
 | 75 | { | 
 | 76 | 	int ret; | 
 | 77 |  | 
 | 78 | 	max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG); | 
 | 79 | 	if (!max77843->i2c_chg) { | 
 | 80 | 		dev_err(&max77843->i2c->dev, | 
 | 81 | 				"Cannot allocate I2C device for Charger\n"); | 
 | 82 | 		return -ENODEV; | 
 | 83 | 	} | 
 | 84 | 	i2c_set_clientdata(max77843->i2c_chg, max77843); | 
 | 85 |  | 
 | 86 | 	max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg, | 
 | 87 | 			&max77843_charger_regmap_config); | 
 | 88 | 	if (IS_ERR(max77843->regmap_chg)) { | 
 | 89 | 		ret = PTR_ERR(max77843->regmap_chg); | 
 | 90 | 		goto err_chg_i2c; | 
 | 91 | 	} | 
 | 92 |  | 
 | 93 | 	return 0; | 
 | 94 |  | 
 | 95 | err_chg_i2c: | 
 | 96 | 	i2c_unregister_device(max77843->i2c_chg); | 
 | 97 |  | 
 | 98 | 	return ret; | 
 | 99 | } | 
 | 100 |  | 
 | 101 | static int max77843_probe(struct i2c_client *i2c, | 
 | 102 | 			  const struct i2c_device_id *id) | 
 | 103 | { | 
 | 104 | 	struct max77693_dev *max77843; | 
 | 105 | 	unsigned int reg_data; | 
 | 106 | 	int ret; | 
 | 107 |  | 
 | 108 | 	max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL); | 
 | 109 | 	if (!max77843) | 
 | 110 | 		return -ENOMEM; | 
 | 111 |  | 
 | 112 | 	i2c_set_clientdata(i2c, max77843); | 
 | 113 | 	max77843->dev = &i2c->dev; | 
 | 114 | 	max77843->i2c = i2c; | 
 | 115 | 	max77843->irq = i2c->irq; | 
 | 116 | 	max77843->type = id->driver_data; | 
 | 117 |  | 
 | 118 | 	max77843->regmap = devm_regmap_init_i2c(i2c, | 
 | 119 | 			&max77843_regmap_config); | 
 | 120 | 	if (IS_ERR(max77843->regmap)) { | 
 | 121 | 		dev_err(&i2c->dev, "Failed to allocate topsys register map\n"); | 
 | 122 | 		return PTR_ERR(max77843->regmap); | 
 | 123 | 	} | 
 | 124 |  | 
 | 125 | 	ret = regmap_add_irq_chip(max77843->regmap, max77843->irq, | 
 | 126 | 			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED, | 
 | 127 | 			0, &max77843_irq_chip, &max77843->irq_data_topsys); | 
 | 128 | 	if (ret) { | 
 | 129 | 		dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n"); | 
 | 130 | 		return ret; | 
 | 131 | 	} | 
 | 132 |  | 
 | 133 | 	ret = regmap_read(max77843->regmap, | 
 | 134 | 			MAX77843_SYS_REG_PMICID, ®_data); | 
 | 135 | 	if (ret < 0) { | 
 | 136 | 		dev_err(&i2c->dev, "Failed to read PMIC ID\n"); | 
 | 137 | 		goto err_pmic_id; | 
 | 138 | 	} | 
 | 139 | 	dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data); | 
 | 140 |  | 
 | 141 | 	ret = max77843_chg_init(max77843); | 
 | 142 | 	if (ret) { | 
 | 143 | 		dev_err(&i2c->dev, "Failed to init Charger\n"); | 
 | 144 | 		goto err_pmic_id; | 
 | 145 | 	} | 
 | 146 |  | 
 | 147 | 	ret = regmap_update_bits(max77843->regmap, | 
 | 148 | 				 MAX77843_SYS_REG_INTSRCMASK, | 
 | 149 | 				 MAX77843_INTSRC_MASK_MASK, | 
 | 150 | 				 (unsigned int)~MAX77843_INTSRC_MASK_MASK); | 
 | 151 | 	if (ret < 0) { | 
 | 152 | 		dev_err(&i2c->dev, "Failed to unmask interrupt source\n"); | 
 | 153 | 		goto err_pmic_id; | 
 | 154 | 	} | 
 | 155 |  | 
 | 156 | 	ret = mfd_add_devices(max77843->dev, -1, max77843_devs, | 
 | 157 | 			      ARRAY_SIZE(max77843_devs), NULL, 0, NULL); | 
 | 158 | 	if (ret < 0) { | 
 | 159 | 		dev_err(&i2c->dev, "Failed to add mfd device\n"); | 
 | 160 | 		goto err_pmic_id; | 
 | 161 | 	} | 
 | 162 |  | 
 | 163 | 	device_init_wakeup(max77843->dev, true); | 
 | 164 |  | 
 | 165 | 	return 0; | 
 | 166 |  | 
 | 167 | err_pmic_id: | 
 | 168 | 	regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys); | 
 | 169 |  | 
 | 170 | 	return ret; | 
 | 171 | } | 
 | 172 |  | 
 | 173 | static const struct of_device_id max77843_dt_match[] = { | 
 | 174 | 	{ .compatible = "maxim,max77843", }, | 
 | 175 | 	{ }, | 
 | 176 | }; | 
 | 177 |  | 
 | 178 | static const struct i2c_device_id max77843_id[] = { | 
 | 179 | 	{ "max77843", TYPE_MAX77843, }, | 
 | 180 | 	{ }, | 
 | 181 | }; | 
 | 182 |  | 
 | 183 | static int __maybe_unused max77843_suspend(struct device *dev) | 
 | 184 | { | 
 | 185 | 	struct i2c_client *i2c = to_i2c_client(dev); | 
 | 186 | 	struct max77693_dev *max77843 = i2c_get_clientdata(i2c); | 
 | 187 |  | 
 | 188 | 	disable_irq(max77843->irq); | 
 | 189 | 	if (device_may_wakeup(dev)) | 
 | 190 | 		enable_irq_wake(max77843->irq); | 
 | 191 |  | 
 | 192 | 	return 0; | 
 | 193 | } | 
 | 194 |  | 
 | 195 | static int __maybe_unused max77843_resume(struct device *dev) | 
 | 196 | { | 
 | 197 | 	struct i2c_client *i2c = to_i2c_client(dev); | 
 | 198 | 	struct max77693_dev *max77843 = i2c_get_clientdata(i2c); | 
 | 199 |  | 
 | 200 | 	if (device_may_wakeup(dev)) | 
 | 201 | 		disable_irq_wake(max77843->irq); | 
 | 202 | 	enable_irq(max77843->irq); | 
 | 203 |  | 
 | 204 | 	return 0; | 
 | 205 | } | 
 | 206 |  | 
 | 207 | static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume); | 
 | 208 |  | 
 | 209 | static struct i2c_driver max77843_i2c_driver = { | 
 | 210 | 	.driver	= { | 
 | 211 | 		.name = "max77843", | 
 | 212 | 		.pm = &max77843_pm, | 
 | 213 | 		.of_match_table = max77843_dt_match, | 
 | 214 | 		.suppress_bind_attrs = true, | 
 | 215 | 	}, | 
 | 216 | 	.probe = max77843_probe, | 
 | 217 | 	.id_table = max77843_id, | 
 | 218 | }; | 
 | 219 |  | 
 | 220 | static int __init max77843_i2c_init(void) | 
 | 221 | { | 
 | 222 | 	return i2c_add_driver(&max77843_i2c_driver); | 
 | 223 | } | 
 | 224 | subsys_initcall(max77843_i2c_init); |