| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * MediaTek USB3.1 gen2 xsphy Driver |
| 4 | * |
| 5 | * Copyright (c) 2018 MediaTek Inc. |
| 6 | * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> |
| 7 | * |
| 8 | */ |
| 9 | |
| 10 | #include <dt-bindings/phy/phy.h> |
| 11 | #include <linux/clk.h> |
| 12 | #include <linux/delay.h> |
| 13 | #include <linux/io.h> |
| 14 | #include <linux/iopoll.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/of_address.h> |
| 17 | #include <linux/phy/phy.h> |
| 18 | #include <linux/platform_device.h> |
| 19 | |
| 20 | /* u2 phy banks */ |
| 21 | #define SSUSB_SIFSLV_MISC 0x000 |
| 22 | #define SSUSB_SIFSLV_U2FREQ 0x100 |
| 23 | #define SSUSB_SIFSLV_U2PHY_COM 0x300 |
| 24 | |
| 25 | /* u3 phy shared banks */ |
| 26 | #define SSPXTP_SIFSLV_DIG_GLB 0x000 |
| 27 | #define SSPXTP_SIFSLV_PHYA_GLB 0x100 |
| 28 | |
| 29 | /* u3 phy banks */ |
| 30 | #define SSPXTP_SIFSLV_DIG_LN_TOP 0x000 |
| 31 | #define SSPXTP_SIFSLV_DIG_LN_TX0 0x100 |
| 32 | #define SSPXTP_SIFSLV_DIG_LN_RX0 0x200 |
| 33 | #define SSPXTP_SIFSLV_DIG_LN_DAIF 0x300 |
| 34 | #define SSPXTP_SIFSLV_PHYA_LN 0x400 |
| 35 | |
| 36 | #define XSP_U2FREQ_FMCR0 ((SSUSB_SIFSLV_U2FREQ) + 0x00) |
| 37 | #define P2F_RG_FREQDET_EN BIT(24) |
| 38 | #define P2F_RG_CYCLECNT GENMASK(23, 0) |
| 39 | #define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x)) |
| 40 | |
| 41 | #define XSP_U2FREQ_MMONR0 ((SSUSB_SIFSLV_U2FREQ) + 0x0c) |
| 42 | |
| 43 | #define XSP_U2FREQ_FMMONR1 ((SSUSB_SIFSLV_U2FREQ) + 0x10) |
| 44 | #define P2F_RG_FRCK_EN BIT(8) |
| 45 | #define P2F_USB_FM_VALID BIT(0) |
| 46 | |
| 47 | #define XSP_USBPHYACR0 ((SSUSB_SIFSLV_U2PHY_COM) + 0x00) |
| 48 | #define P2A0_RG_INTR_EN BIT(5) |
| 49 | |
| 50 | #define XSP_USBPHYACR1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x04) |
| 51 | #define P2A1_RG_INTR_CAL GENMASK(23, 19) |
| 52 | #define P2A1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19) |
| 53 | #define P2A1_RG_VRT_SEL GENMASK(14, 12) |
| 54 | #define P2A1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12) |
| 55 | #define P2A1_RG_TERM_SEL GENMASK(10, 8) |
| 56 | #define P2A1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8) |
| 57 | |
| 58 | #define XSP_USBPHYACR5 ((SSUSB_SIFSLV_U2PHY_COM) + 0x014) |
| 59 | #define P2A5_RG_HSTX_SRCAL_EN BIT(15) |
| 60 | #define P2A5_RG_HSTX_SRCTRL GENMASK(14, 12) |
| 61 | #define P2A5_RG_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) |
| 62 | |
| 63 | #define XSP_USBPHYACR6 ((SSUSB_SIFSLV_U2PHY_COM) + 0x018) |
| 64 | #define P2A6_RG_BC11_SW_EN BIT(23) |
| 65 | #define P2A6_RG_OTG_VBUSCMP_EN BIT(20) |
| 66 | |
| 67 | #define XSP_U2PHYDTM1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x06C) |
| 68 | #define P2D_FORCE_IDDIG BIT(9) |
| 69 | #define P2D_RG_VBUSVALID BIT(5) |
| 70 | #define P2D_RG_SESSEND BIT(4) |
| 71 | #define P2D_RG_AVALID BIT(2) |
| 72 | #define P2D_RG_IDDIG BIT(1) |
| 73 | |
| 74 | #define SSPXTP_PHYA_GLB_00 ((SSPXTP_SIFSLV_PHYA_GLB) + 0x00) |
| 75 | #define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(21, 16) |
| 76 | #define RG_XTP_GLB_BIAS_INTR_CTRL_VAL(x) ((0x3f & (x)) << 16) |
| 77 | |
| 78 | #define SSPXTP_PHYA_LN_04 ((SSPXTP_SIFSLV_PHYA_LN) + 0x04) |
| 79 | #define RG_XTP_LN0_TX_IMPSEL GENMASK(4, 0) |
| 80 | #define RG_XTP_LN0_TX_IMPSEL_VAL(x) (0x1f & (x)) |
| 81 | |
| 82 | #define SSPXTP_PHYA_LN_14 ((SSPXTP_SIFSLV_PHYA_LN) + 0x014) |
| 83 | #define RG_XTP_LN0_RX_IMPSEL GENMASK(4, 0) |
| 84 | #define RG_XTP_LN0_RX_IMPSEL_VAL(x) (0x1f & (x)) |
| 85 | |
| 86 | #define XSP_REF_CLK 26 /* MHZ */ |
| 87 | #define XSP_SLEW_RATE_COEF 17 |
| 88 | #define XSP_SR_COEF_DIVISOR 1000 |
| 89 | #define XSP_FM_DET_CYCLE_CNT 1024 |
| 90 | |
| 91 | struct xsphy_instance { |
| 92 | struct phy *phy; |
| 93 | void __iomem *port_base; |
| 94 | struct clk *ref_clk; /* reference clock of anolog phy */ |
| 95 | u32 index; |
| 96 | u32 type; |
| 97 | /* only for HQA test */ |
| 98 | int efuse_intr; |
| 99 | int efuse_tx_imp; |
| 100 | int efuse_rx_imp; |
| 101 | /* u2 eye diagram */ |
| 102 | int eye_src; |
| 103 | int eye_vrt; |
| 104 | int eye_term; |
| 105 | }; |
| 106 | |
| 107 | struct mtk_xsphy { |
| 108 | struct device *dev; |
| 109 | void __iomem *glb_base; /* only shared u3 sif */ |
| 110 | struct xsphy_instance **phys; |
| 111 | int nphys; |
| 112 | int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ |
| 113 | int src_coef; /* coefficient for slew rate calibrate */ |
| 114 | }; |
| 115 | |
| 116 | static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy, |
| 117 | struct xsphy_instance *inst) |
| 118 | { |
| 119 | void __iomem *pbase = inst->port_base; |
| 120 | int calib_val; |
| 121 | int fm_out; |
| 122 | u32 tmp; |
| 123 | |
| 124 | /* use force value */ |
| 125 | if (inst->eye_src) |
| 126 | return; |
| 127 | |
| 128 | /* enable USB ring oscillator */ |
| 129 | tmp = readl(pbase + XSP_USBPHYACR5); |
| 130 | tmp |= P2A5_RG_HSTX_SRCAL_EN; |
| 131 | writel(tmp, pbase + XSP_USBPHYACR5); |
| 132 | udelay(1); /* wait clock stable */ |
| 133 | |
| 134 | /* enable free run clock */ |
| 135 | tmp = readl(pbase + XSP_U2FREQ_FMMONR1); |
| 136 | tmp |= P2F_RG_FRCK_EN; |
| 137 | writel(tmp, pbase + XSP_U2FREQ_FMMONR1); |
| 138 | |
| 139 | /* set cycle count as 1024 */ |
| 140 | tmp = readl(pbase + XSP_U2FREQ_FMCR0); |
| 141 | tmp &= ~(P2F_RG_CYCLECNT); |
| 142 | tmp |= P2F_RG_CYCLECNT_VAL(XSP_FM_DET_CYCLE_CNT); |
| 143 | writel(tmp, pbase + XSP_U2FREQ_FMCR0); |
| 144 | |
| 145 | /* enable frequency meter */ |
| 146 | tmp = readl(pbase + XSP_U2FREQ_FMCR0); |
| 147 | tmp |= P2F_RG_FREQDET_EN; |
| 148 | writel(tmp, pbase + XSP_U2FREQ_FMCR0); |
| 149 | |
| 150 | /* ignore return value */ |
| 151 | readl_poll_timeout(pbase + XSP_U2FREQ_FMMONR1, tmp, |
| 152 | (tmp & P2F_USB_FM_VALID), 10, 200); |
| 153 | |
| 154 | fm_out = readl(pbase + XSP_U2FREQ_MMONR0); |
| 155 | |
| 156 | /* disable frequency meter */ |
| 157 | tmp = readl(pbase + XSP_U2FREQ_FMCR0); |
| 158 | tmp &= ~P2F_RG_FREQDET_EN; |
| 159 | writel(tmp, pbase + XSP_U2FREQ_FMCR0); |
| 160 | |
| 161 | /* disable free run clock */ |
| 162 | tmp = readl(pbase + XSP_U2FREQ_FMMONR1); |
| 163 | tmp &= ~P2F_RG_FRCK_EN; |
| 164 | writel(tmp, pbase + XSP_U2FREQ_FMMONR1); |
| 165 | |
| 166 | if (fm_out) { |
| 167 | /* (1024 / FM_OUT) x reference clock frequency x coefficient */ |
| 168 | tmp = xsphy->src_ref_clk * xsphy->src_coef; |
| 169 | tmp = (tmp * XSP_FM_DET_CYCLE_CNT) / fm_out; |
| 170 | calib_val = DIV_ROUND_CLOSEST(tmp, XSP_SR_COEF_DIVISOR); |
| 171 | } else { |
| 172 | /* if FM detection fail, set default value */ |
| 173 | calib_val = 3; |
| 174 | } |
| 175 | dev_dbg(xsphy->dev, "phy.%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n", |
| 176 | inst->index, fm_out, calib_val, |
| 177 | xsphy->src_ref_clk, xsphy->src_coef); |
| 178 | |
| 179 | /* set HS slew rate */ |
| 180 | tmp = readl(pbase + XSP_USBPHYACR5); |
| 181 | tmp &= ~P2A5_RG_HSTX_SRCTRL; |
| 182 | tmp |= P2A5_RG_HSTX_SRCTRL_VAL(calib_val); |
| 183 | writel(tmp, pbase + XSP_USBPHYACR5); |
| 184 | |
| 185 | /* disable USB ring oscillator */ |
| 186 | tmp = readl(pbase + XSP_USBPHYACR5); |
| 187 | tmp &= ~P2A5_RG_HSTX_SRCAL_EN; |
| 188 | writel(tmp, pbase + XSP_USBPHYACR5); |
| 189 | } |
| 190 | |
| 191 | static void u2_phy_instance_init(struct mtk_xsphy *xsphy, |
| 192 | struct xsphy_instance *inst) |
| 193 | { |
| 194 | void __iomem *pbase = inst->port_base; |
| 195 | u32 tmp; |
| 196 | |
| 197 | /* DP/DM BC1.1 path Disable */ |
| 198 | tmp = readl(pbase + XSP_USBPHYACR6); |
| 199 | tmp &= ~P2A6_RG_BC11_SW_EN; |
| 200 | writel(tmp, pbase + XSP_USBPHYACR6); |
| 201 | |
| 202 | tmp = readl(pbase + XSP_USBPHYACR0); |
| 203 | tmp |= P2A0_RG_INTR_EN; |
| 204 | writel(tmp, pbase + XSP_USBPHYACR0); |
| 205 | } |
| 206 | |
| 207 | static void u2_phy_instance_power_on(struct mtk_xsphy *xsphy, |
| 208 | struct xsphy_instance *inst) |
| 209 | { |
| 210 | void __iomem *pbase = inst->port_base; |
| 211 | u32 index = inst->index; |
| 212 | u32 tmp; |
| 213 | |
| 214 | tmp = readl(pbase + XSP_USBPHYACR6); |
| 215 | tmp |= P2A6_RG_OTG_VBUSCMP_EN; |
| 216 | writel(tmp, pbase + XSP_USBPHYACR6); |
| 217 | |
| 218 | tmp = readl(pbase + XSP_U2PHYDTM1); |
| 219 | tmp |= P2D_RG_VBUSVALID | P2D_RG_AVALID; |
| 220 | tmp &= ~P2D_RG_SESSEND; |
| 221 | writel(tmp, pbase + XSP_U2PHYDTM1); |
| 222 | |
| 223 | dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); |
| 224 | } |
| 225 | |
| 226 | static void u2_phy_instance_power_off(struct mtk_xsphy *xsphy, |
| 227 | struct xsphy_instance *inst) |
| 228 | { |
| 229 | void __iomem *pbase = inst->port_base; |
| 230 | u32 index = inst->index; |
| 231 | u32 tmp; |
| 232 | |
| 233 | tmp = readl(pbase + XSP_USBPHYACR6); |
| 234 | tmp &= ~P2A6_RG_OTG_VBUSCMP_EN; |
| 235 | writel(tmp, pbase + XSP_USBPHYACR6); |
| 236 | |
| 237 | tmp = readl(pbase + XSP_U2PHYDTM1); |
| 238 | tmp &= ~(P2D_RG_VBUSVALID | P2D_RG_AVALID); |
| 239 | tmp |= P2D_RG_SESSEND; |
| 240 | writel(tmp, pbase + XSP_U2PHYDTM1); |
| 241 | |
| 242 | dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); |
| 243 | } |
| 244 | |
| 245 | static void u2_phy_instance_set_mode(struct mtk_xsphy *xsphy, |
| 246 | struct xsphy_instance *inst, |
| 247 | enum phy_mode mode) |
| 248 | { |
| 249 | u32 tmp; |
| 250 | |
| 251 | tmp = readl(inst->port_base + XSP_U2PHYDTM1); |
| 252 | switch (mode) { |
| 253 | case PHY_MODE_USB_DEVICE: |
| 254 | tmp |= P2D_FORCE_IDDIG | P2D_RG_IDDIG; |
| 255 | break; |
| 256 | case PHY_MODE_USB_HOST: |
| 257 | tmp |= P2D_FORCE_IDDIG; |
| 258 | tmp &= ~P2D_RG_IDDIG; |
| 259 | break; |
| 260 | case PHY_MODE_USB_OTG: |
| 261 | tmp &= ~(P2D_FORCE_IDDIG | P2D_RG_IDDIG); |
| 262 | break; |
| 263 | default: |
| 264 | return; |
| 265 | } |
| 266 | writel(tmp, inst->port_base + XSP_U2PHYDTM1); |
| 267 | } |
| 268 | |
| 269 | static void phy_parse_property(struct mtk_xsphy *xsphy, |
| 270 | struct xsphy_instance *inst) |
| 271 | { |
| 272 | struct device *dev = &inst->phy->dev; |
| 273 | |
| 274 | switch (inst->type) { |
| 275 | case PHY_TYPE_USB2: |
| 276 | device_property_read_u32(dev, "mediatek,efuse-intr", |
| 277 | &inst->efuse_intr); |
| 278 | device_property_read_u32(dev, "mediatek,eye-src", |
| 279 | &inst->eye_src); |
| 280 | device_property_read_u32(dev, "mediatek,eye-vrt", |
| 281 | &inst->eye_vrt); |
| 282 | device_property_read_u32(dev, "mediatek,eye-term", |
| 283 | &inst->eye_term); |
| 284 | dev_dbg(dev, "intr:%d, src:%d, vrt:%d, term:%d\n", |
| 285 | inst->efuse_intr, inst->eye_src, |
| 286 | inst->eye_vrt, inst->eye_term); |
| 287 | break; |
| 288 | case PHY_TYPE_USB3: |
| 289 | device_property_read_u32(dev, "mediatek,efuse-intr", |
| 290 | &inst->efuse_intr); |
| 291 | device_property_read_u32(dev, "mediatek,efuse-tx-imp", |
| 292 | &inst->efuse_tx_imp); |
| 293 | device_property_read_u32(dev, "mediatek,efuse-rx-imp", |
| 294 | &inst->efuse_rx_imp); |
| 295 | dev_dbg(dev, "intr:%d, tx-imp:%d, rx-imp:%d\n", |
| 296 | inst->efuse_intr, inst->efuse_tx_imp, |
| 297 | inst->efuse_rx_imp); |
| 298 | break; |
| 299 | default: |
| 300 | dev_err(xsphy->dev, "incompatible phy type\n"); |
| 301 | return; |
| 302 | } |
| 303 | } |
| 304 | |
| 305 | static void u2_phy_props_set(struct mtk_xsphy *xsphy, |
| 306 | struct xsphy_instance *inst) |
| 307 | { |
| 308 | void __iomem *pbase = inst->port_base; |
| 309 | u32 tmp; |
| 310 | |
| 311 | if (inst->efuse_intr) { |
| 312 | tmp = readl(pbase + XSP_USBPHYACR1); |
| 313 | tmp &= ~P2A1_RG_INTR_CAL; |
| 314 | tmp |= P2A1_RG_INTR_CAL_VAL(inst->efuse_intr); |
| 315 | writel(tmp, pbase + XSP_USBPHYACR1); |
| 316 | } |
| 317 | |
| 318 | if (inst->eye_src) { |
| 319 | tmp = readl(pbase + XSP_USBPHYACR5); |
| 320 | tmp &= ~P2A5_RG_HSTX_SRCTRL; |
| 321 | tmp |= P2A5_RG_HSTX_SRCTRL_VAL(inst->eye_src); |
| 322 | writel(tmp, pbase + XSP_USBPHYACR5); |
| 323 | } |
| 324 | |
| 325 | if (inst->eye_vrt) { |
| 326 | tmp = readl(pbase + XSP_USBPHYACR1); |
| 327 | tmp &= ~P2A1_RG_VRT_SEL; |
| 328 | tmp |= P2A1_RG_VRT_SEL_VAL(inst->eye_vrt); |
| 329 | writel(tmp, pbase + XSP_USBPHYACR1); |
| 330 | } |
| 331 | |
| 332 | if (inst->eye_term) { |
| 333 | tmp = readl(pbase + XSP_USBPHYACR1); |
| 334 | tmp &= ~P2A1_RG_TERM_SEL; |
| 335 | tmp |= P2A1_RG_TERM_SEL_VAL(inst->eye_term); |
| 336 | writel(tmp, pbase + XSP_USBPHYACR1); |
| 337 | } |
| 338 | } |
| 339 | |
| 340 | static void u3_phy_props_set(struct mtk_xsphy *xsphy, |
| 341 | struct xsphy_instance *inst) |
| 342 | { |
| 343 | void __iomem *pbase = inst->port_base; |
| 344 | u32 tmp; |
| 345 | |
| 346 | if (inst->efuse_intr) { |
| 347 | tmp = readl(xsphy->glb_base + SSPXTP_PHYA_GLB_00); |
| 348 | tmp &= ~RG_XTP_GLB_BIAS_INTR_CTRL; |
| 349 | tmp |= RG_XTP_GLB_BIAS_INTR_CTRL_VAL(inst->efuse_intr); |
| 350 | writel(tmp, xsphy->glb_base + SSPXTP_PHYA_GLB_00); |
| 351 | } |
| 352 | |
| 353 | if (inst->efuse_tx_imp) { |
| 354 | tmp = readl(pbase + SSPXTP_PHYA_LN_04); |
| 355 | tmp &= ~RG_XTP_LN0_TX_IMPSEL; |
| 356 | tmp |= RG_XTP_LN0_TX_IMPSEL_VAL(inst->efuse_tx_imp); |
| 357 | writel(tmp, pbase + SSPXTP_PHYA_LN_04); |
| 358 | } |
| 359 | |
| 360 | if (inst->efuse_rx_imp) { |
| 361 | tmp = readl(pbase + SSPXTP_PHYA_LN_14); |
| 362 | tmp &= ~RG_XTP_LN0_RX_IMPSEL; |
| 363 | tmp |= RG_XTP_LN0_RX_IMPSEL_VAL(inst->efuse_rx_imp); |
| 364 | writel(tmp, pbase + SSPXTP_PHYA_LN_14); |
| 365 | } |
| 366 | } |
| 367 | |
| 368 | static int mtk_phy_init(struct phy *phy) |
| 369 | { |
| 370 | struct xsphy_instance *inst = phy_get_drvdata(phy); |
| 371 | struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); |
| 372 | int ret; |
| 373 | |
| 374 | ret = clk_prepare_enable(inst->ref_clk); |
| 375 | if (ret) { |
| 376 | dev_err(xsphy->dev, "failed to enable ref_clk\n"); |
| 377 | return ret; |
| 378 | } |
| 379 | |
| 380 | switch (inst->type) { |
| 381 | case PHY_TYPE_USB2: |
| 382 | u2_phy_instance_init(xsphy, inst); |
| 383 | u2_phy_props_set(xsphy, inst); |
| 384 | break; |
| 385 | case PHY_TYPE_USB3: |
| 386 | u3_phy_props_set(xsphy, inst); |
| 387 | break; |
| 388 | default: |
| 389 | dev_err(xsphy->dev, "incompatible phy type\n"); |
| 390 | clk_disable_unprepare(inst->ref_clk); |
| 391 | return -EINVAL; |
| 392 | } |
| 393 | |
| 394 | return 0; |
| 395 | } |
| 396 | |
| 397 | static int mtk_phy_power_on(struct phy *phy) |
| 398 | { |
| 399 | struct xsphy_instance *inst = phy_get_drvdata(phy); |
| 400 | struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); |
| 401 | |
| 402 | if (inst->type == PHY_TYPE_USB2) { |
| 403 | u2_phy_instance_power_on(xsphy, inst); |
| 404 | u2_phy_slew_rate_calibrate(xsphy, inst); |
| 405 | } |
| 406 | |
| 407 | return 0; |
| 408 | } |
| 409 | |
| 410 | static int mtk_phy_power_off(struct phy *phy) |
| 411 | { |
| 412 | struct xsphy_instance *inst = phy_get_drvdata(phy); |
| 413 | struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); |
| 414 | |
| 415 | if (inst->type == PHY_TYPE_USB2) |
| 416 | u2_phy_instance_power_off(xsphy, inst); |
| 417 | |
| 418 | return 0; |
| 419 | } |
| 420 | |
| 421 | static int mtk_phy_exit(struct phy *phy) |
| 422 | { |
| 423 | struct xsphy_instance *inst = phy_get_drvdata(phy); |
| 424 | |
| 425 | clk_disable_unprepare(inst->ref_clk); |
| 426 | return 0; |
| 427 | } |
| 428 | |
| 429 | static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode) |
| 430 | { |
| 431 | struct xsphy_instance *inst = phy_get_drvdata(phy); |
| 432 | struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); |
| 433 | |
| 434 | if (inst->type == PHY_TYPE_USB2) |
| 435 | u2_phy_instance_set_mode(xsphy, inst, mode); |
| 436 | |
| 437 | return 0; |
| 438 | } |
| 439 | |
| 440 | static struct phy *mtk_phy_xlate(struct device *dev, |
| 441 | struct of_phandle_args *args) |
| 442 | { |
| 443 | struct mtk_xsphy *xsphy = dev_get_drvdata(dev); |
| 444 | struct xsphy_instance *inst = NULL; |
| 445 | struct device_node *phy_np = args->np; |
| 446 | int index; |
| 447 | |
| 448 | if (args->args_count != 1) { |
| 449 | dev_err(dev, "invalid number of cells in 'phy' property\n"); |
| 450 | return ERR_PTR(-EINVAL); |
| 451 | } |
| 452 | |
| 453 | for (index = 0; index < xsphy->nphys; index++) |
| 454 | if (phy_np == xsphy->phys[index]->phy->dev.of_node) { |
| 455 | inst = xsphy->phys[index]; |
| 456 | break; |
| 457 | } |
| 458 | |
| 459 | if (!inst) { |
| 460 | dev_err(dev, "failed to find appropriate phy\n"); |
| 461 | return ERR_PTR(-EINVAL); |
| 462 | } |
| 463 | |
| 464 | inst->type = args->args[0]; |
| 465 | if (!(inst->type == PHY_TYPE_USB2 || |
| 466 | inst->type == PHY_TYPE_USB3)) { |
| 467 | dev_err(dev, "unsupported phy type: %d\n", inst->type); |
| 468 | return ERR_PTR(-EINVAL); |
| 469 | } |
| 470 | |
| 471 | phy_parse_property(xsphy, inst); |
| 472 | |
| 473 | return inst->phy; |
| 474 | } |
| 475 | |
| 476 | static const struct phy_ops mtk_xsphy_ops = { |
| 477 | .init = mtk_phy_init, |
| 478 | .exit = mtk_phy_exit, |
| 479 | .power_on = mtk_phy_power_on, |
| 480 | .power_off = mtk_phy_power_off, |
| 481 | .set_mode = mtk_phy_set_mode, |
| 482 | .owner = THIS_MODULE, |
| 483 | }; |
| 484 | |
| 485 | static const struct of_device_id mtk_xsphy_id_table[] = { |
| 486 | { .compatible = "mediatek,xsphy", }, |
| 487 | { }, |
| 488 | }; |
| 489 | MODULE_DEVICE_TABLE(of, mtk_xsphy_id_table); |
| 490 | |
| 491 | static int mtk_xsphy_probe(struct platform_device *pdev) |
| 492 | { |
| 493 | struct device *dev = &pdev->dev; |
| 494 | struct device_node *np = dev->of_node; |
| 495 | struct device_node *child_np; |
| 496 | struct phy_provider *provider; |
| 497 | struct resource *glb_res; |
| 498 | struct mtk_xsphy *xsphy; |
| 499 | struct resource res; |
| 500 | int port, retval; |
| 501 | |
| 502 | xsphy = devm_kzalloc(dev, sizeof(*xsphy), GFP_KERNEL); |
| 503 | if (!xsphy) |
| 504 | return -ENOMEM; |
| 505 | |
| 506 | xsphy->nphys = of_get_child_count(np); |
| 507 | xsphy->phys = devm_kcalloc(dev, xsphy->nphys, |
| 508 | sizeof(*xsphy->phys), GFP_KERNEL); |
| 509 | if (!xsphy->phys) |
| 510 | return -ENOMEM; |
| 511 | |
| 512 | xsphy->dev = dev; |
| 513 | platform_set_drvdata(pdev, xsphy); |
| 514 | |
| 515 | glb_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 516 | /* optional, may not exist if no u3 phys */ |
| 517 | if (glb_res) { |
| 518 | /* get banks shared by multiple u3 phys */ |
| 519 | xsphy->glb_base = devm_ioremap_resource(dev, glb_res); |
| 520 | if (IS_ERR(xsphy->glb_base)) { |
| 521 | dev_err(dev, "failed to remap glb regs\n"); |
| 522 | return PTR_ERR(xsphy->glb_base); |
| 523 | } |
| 524 | } |
| 525 | |
| 526 | xsphy->src_ref_clk = XSP_REF_CLK; |
| 527 | xsphy->src_coef = XSP_SLEW_RATE_COEF; |
| 528 | /* update parameters of slew rate calibrate if exist */ |
| 529 | device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", |
| 530 | &xsphy->src_ref_clk); |
| 531 | device_property_read_u32(dev, "mediatek,src-coef", &xsphy->src_coef); |
| 532 | |
| 533 | port = 0; |
| 534 | for_each_child_of_node(np, child_np) { |
| 535 | struct xsphy_instance *inst; |
| 536 | struct phy *phy; |
| 537 | |
| 538 | inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL); |
| 539 | if (!inst) { |
| 540 | retval = -ENOMEM; |
| 541 | goto put_child; |
| 542 | } |
| 543 | |
| 544 | xsphy->phys[port] = inst; |
| 545 | |
| 546 | phy = devm_phy_create(dev, child_np, &mtk_xsphy_ops); |
| 547 | if (IS_ERR(phy)) { |
| 548 | dev_err(dev, "failed to create phy\n"); |
| 549 | retval = PTR_ERR(phy); |
| 550 | goto put_child; |
| 551 | } |
| 552 | |
| 553 | retval = of_address_to_resource(child_np, 0, &res); |
| 554 | if (retval) { |
| 555 | dev_err(dev, "failed to get address resource(id-%d)\n", |
| 556 | port); |
| 557 | goto put_child; |
| 558 | } |
| 559 | |
| 560 | inst->port_base = devm_ioremap_resource(&phy->dev, &res); |
| 561 | if (IS_ERR(inst->port_base)) { |
| 562 | dev_err(dev, "failed to remap phy regs\n"); |
| 563 | retval = PTR_ERR(inst->port_base); |
| 564 | goto put_child; |
| 565 | } |
| 566 | |
| 567 | inst->phy = phy; |
| 568 | inst->index = port; |
| 569 | phy_set_drvdata(phy, inst); |
| 570 | port++; |
| 571 | |
| 572 | inst->ref_clk = devm_clk_get(&phy->dev, "ref"); |
| 573 | if (IS_ERR(inst->ref_clk)) { |
| 574 | dev_err(dev, "failed to get ref_clk(id-%d)\n", port); |
| 575 | retval = PTR_ERR(inst->ref_clk); |
| 576 | goto put_child; |
| 577 | } |
| 578 | } |
| 579 | |
| 580 | provider = devm_of_phy_provider_register(dev, mtk_phy_xlate); |
| 581 | return PTR_ERR_OR_ZERO(provider); |
| 582 | |
| 583 | put_child: |
| 584 | of_node_put(child_np); |
| 585 | return retval; |
| 586 | } |
| 587 | |
| 588 | static struct platform_driver mtk_xsphy_driver = { |
| 589 | .probe = mtk_xsphy_probe, |
| 590 | .driver = { |
| 591 | .name = "mtk-xsphy", |
| 592 | .of_match_table = mtk_xsphy_id_table, |
| 593 | }, |
| 594 | }; |
| 595 | |
| 596 | module_platform_driver(mtk_xsphy_driver); |
| 597 | |
| 598 | MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); |
| 599 | MODULE_DESCRIPTION("MediaTek USB XS-PHY driver"); |
| 600 | MODULE_LICENSE("GPL v2"); |