| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame^] | 1 | Kernel driver ibmaem |
| 2 | ====================== |
| 3 | |
| 4 | This driver talks to the IBM Systems Director Active Energy Manager, known |
| 5 | henceforth as AEM. |
| 6 | |
| 7 | Supported systems: |
| 8 | * Any recent IBM System X server with AEM support. |
| 9 | This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2, |
| 10 | x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. The IPMI host interface |
| 11 | driver ("ipmi-si") needs to be loaded for this driver to do anything. |
| 12 | Prefix: 'ibmaem' |
| 13 | Datasheet: Not available |
| 14 | |
| 15 | Author: Darrick J. Wong |
| 16 | |
| 17 | Description |
| 18 | ----------- |
| 19 | |
| 20 | This driver implements sensor reading support for the energy and power meters |
| 21 | available on various IBM System X hardware through the BMC. All sensor banks |
| 22 | will be exported as platform devices; this driver can talk to both v1 and v2 |
| 23 | interfaces. This driver is completely separate from the older ibmpex driver. |
| 24 | |
| 25 | The v1 AEM interface has a simple set of features to monitor energy use. There |
| 26 | is a register that displays an estimate of raw energy consumption since the |
| 27 | last BMC reset, and a power sensor that returns average power use over a |
| 28 | configurable interval. |
| 29 | |
| 30 | The v2 AEM interface is a bit more sophisticated, being able to present a wider |
| 31 | range of energy and power use registers, the power cap as set by the AEM |
| 32 | software, and temperature sensors. |
| 33 | |
| 34 | Special Features |
| 35 | ---------------- |
| 36 | |
| 37 | The "power_cap" value displays the current system power cap, as set by the AEM |
| 38 | software. Setting the power cap from the host is not currently supported. |