| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame^] | 1 | /* | 
|  | 2 | * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices | 
|  | 3 | * | 
|  | 4 | * Author : Liu Junliang <liujunliang_ljl@163.com> | 
|  | 5 | * | 
|  | 6 | * Based on dm9601.c | 
|  | 7 | * | 
|  | 8 | * This file is licensed under the terms of the GNU General Public License | 
|  | 9 | * version 2.  This program is licensed "as is" without any warranty of any | 
|  | 10 | * kind, whether express or implied. | 
|  | 11 | */ | 
|  | 12 |  | 
|  | 13 | #include <linux/module.h> | 
|  | 14 | #include <linux/sched.h> | 
|  | 15 | #include <linux/stddef.h> | 
|  | 16 | #include <linux/netdevice.h> | 
|  | 17 | #include <linux/etherdevice.h> | 
|  | 18 | #include <linux/ethtool.h> | 
|  | 19 | #include <linux/mii.h> | 
|  | 20 | #include <linux/usb.h> | 
|  | 21 | #include <linux/crc32.h> | 
|  | 22 | #include <linux/usb/usbnet.h> | 
|  | 23 |  | 
|  | 24 | #include "sr9700.h" | 
|  | 25 |  | 
|  | 26 | static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data) | 
|  | 27 | { | 
|  | 28 | int err; | 
|  | 29 |  | 
|  | 30 | err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data, | 
|  | 31 | length); | 
|  | 32 | if ((err != length) && (err >= 0)) | 
|  | 33 | err = -EINVAL; | 
|  | 34 | return err; | 
|  | 35 | } | 
|  | 36 |  | 
|  | 37 | static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data) | 
|  | 38 | { | 
|  | 39 | int err; | 
|  | 40 |  | 
|  | 41 | err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data, | 
|  | 42 | length); | 
|  | 43 | if ((err >= 0) && (err < length)) | 
|  | 44 | err = -EINVAL; | 
|  | 45 | return err; | 
|  | 46 | } | 
|  | 47 |  | 
|  | 48 | static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value) | 
|  | 49 | { | 
|  | 50 | return sr_read(dev, reg, 1, value); | 
|  | 51 | } | 
|  | 52 |  | 
|  | 53 | static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value) | 
|  | 54 | { | 
|  | 55 | return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, | 
|  | 56 | value, reg, NULL, 0); | 
|  | 57 | } | 
|  | 58 |  | 
|  | 59 | static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) | 
|  | 60 | { | 
|  | 61 | usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, | 
|  | 62 | 0, reg, data, length); | 
|  | 63 | } | 
|  | 64 |  | 
|  | 65 | static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value) | 
|  | 66 | { | 
|  | 67 | usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, | 
|  | 68 | value, reg, NULL, 0); | 
|  | 69 | } | 
|  | 70 |  | 
|  | 71 | static int wait_phy_eeprom_ready(struct usbnet *dev, int phy) | 
|  | 72 | { | 
|  | 73 | int i; | 
|  | 74 |  | 
|  | 75 | for (i = 0; i < SR_SHARE_TIMEOUT; i++) { | 
|  | 76 | u8 tmp = 0; | 
|  | 77 | int ret; | 
|  | 78 |  | 
|  | 79 | udelay(1); | 
|  | 80 | ret = sr_read_reg(dev, SR_EPCR, &tmp); | 
|  | 81 | if (ret < 0) | 
|  | 82 | return ret; | 
|  | 83 |  | 
|  | 84 | /* ready */ | 
|  | 85 | if (!(tmp & EPCR_ERRE)) | 
|  | 86 | return 0; | 
|  | 87 | } | 
|  | 88 |  | 
|  | 89 | netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom"); | 
|  | 90 |  | 
|  | 91 | return -EIO; | 
|  | 92 | } | 
|  | 93 |  | 
|  | 94 | static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, | 
|  | 95 | __le16 *value) | 
|  | 96 | { | 
|  | 97 | int ret; | 
|  | 98 |  | 
|  | 99 | mutex_lock(&dev->phy_mutex); | 
|  | 100 |  | 
|  | 101 | sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); | 
|  | 102 | sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); | 
|  | 103 |  | 
|  | 104 | ret = wait_phy_eeprom_ready(dev, phy); | 
|  | 105 | if (ret < 0) | 
|  | 106 | goto out_unlock; | 
|  | 107 |  | 
|  | 108 | sr_write_reg(dev, SR_EPCR, 0x0); | 
|  | 109 | ret = sr_read(dev, SR_EPDR, 2, value); | 
|  | 110 |  | 
|  | 111 | netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n", | 
|  | 112 | phy, reg, *value, ret); | 
|  | 113 |  | 
|  | 114 | out_unlock: | 
|  | 115 | mutex_unlock(&dev->phy_mutex); | 
|  | 116 | return ret; | 
|  | 117 | } | 
|  | 118 |  | 
|  | 119 | static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, | 
|  | 120 | __le16 value) | 
|  | 121 | { | 
|  | 122 | int ret; | 
|  | 123 |  | 
|  | 124 | mutex_lock(&dev->phy_mutex); | 
|  | 125 |  | 
|  | 126 | ret = sr_write(dev, SR_EPDR, 2, &value); | 
|  | 127 | if (ret < 0) | 
|  | 128 | goto out_unlock; | 
|  | 129 |  | 
|  | 130 | sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); | 
|  | 131 | sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : | 
|  | 132 | (EPCR_WEP | EPCR_ERPRW)); | 
|  | 133 |  | 
|  | 134 | ret = wait_phy_eeprom_ready(dev, phy); | 
|  | 135 | if (ret < 0) | 
|  | 136 | goto out_unlock; | 
|  | 137 |  | 
|  | 138 | sr_write_reg(dev, SR_EPCR, 0x0); | 
|  | 139 |  | 
|  | 140 | out_unlock: | 
|  | 141 | mutex_unlock(&dev->phy_mutex); | 
|  | 142 | return ret; | 
|  | 143 | } | 
|  | 144 |  | 
|  | 145 | static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value) | 
|  | 146 | { | 
|  | 147 | return sr_share_read_word(dev, 0, offset, value); | 
|  | 148 | } | 
|  | 149 |  | 
|  | 150 | static int sr9700_get_eeprom_len(struct net_device *netdev) | 
|  | 151 | { | 
|  | 152 | return SR_EEPROM_LEN; | 
|  | 153 | } | 
|  | 154 |  | 
|  | 155 | static int sr9700_get_eeprom(struct net_device *netdev, | 
|  | 156 | struct ethtool_eeprom *eeprom, u8 *data) | 
|  | 157 | { | 
|  | 158 | struct usbnet *dev = netdev_priv(netdev); | 
|  | 159 | __le16 *buf = (__le16 *)data; | 
|  | 160 | int ret = 0; | 
|  | 161 | int i; | 
|  | 162 |  | 
|  | 163 | /* access is 16bit */ | 
|  | 164 | if ((eeprom->offset & 0x01) || (eeprom->len & 0x01)) | 
|  | 165 | return -EINVAL; | 
|  | 166 |  | 
|  | 167 | for (i = 0; i < eeprom->len / 2; i++) { | 
|  | 168 | ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i); | 
|  | 169 | if (ret < 0) | 
|  | 170 | break; | 
|  | 171 | } | 
|  | 172 |  | 
|  | 173 | return ret; | 
|  | 174 | } | 
|  | 175 |  | 
|  | 176 | static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc) | 
|  | 177 | { | 
|  | 178 | struct usbnet *dev = netdev_priv(netdev); | 
|  | 179 | __le16 res; | 
|  | 180 | int rc = 0; | 
|  | 181 |  | 
|  | 182 | if (phy_id) { | 
|  | 183 | netdev_dbg(netdev, "Only internal phy supported\n"); | 
|  | 184 | return 0; | 
|  | 185 | } | 
|  | 186 |  | 
|  | 187 | /* Access NSR_LINKST bit for link status instead of MII_BMSR */ | 
|  | 188 | if (loc == MII_BMSR) { | 
|  | 189 | u8 value; | 
|  | 190 |  | 
|  | 191 | sr_read_reg(dev, SR_NSR, &value); | 
|  | 192 | if (value & NSR_LINKST) | 
|  | 193 | rc = 1; | 
|  | 194 | } | 
|  | 195 | sr_share_read_word(dev, 1, loc, &res); | 
|  | 196 | if (rc == 1) | 
|  | 197 | res = le16_to_cpu(res) | BMSR_LSTATUS; | 
|  | 198 | else | 
|  | 199 | res = le16_to_cpu(res) & ~BMSR_LSTATUS; | 
|  | 200 |  | 
|  | 201 | netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", | 
|  | 202 | phy_id, loc, res); | 
|  | 203 |  | 
|  | 204 | return res; | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc, | 
|  | 208 | int val) | 
|  | 209 | { | 
|  | 210 | struct usbnet *dev = netdev_priv(netdev); | 
|  | 211 | __le16 res = cpu_to_le16(val); | 
|  | 212 |  | 
|  | 213 | if (phy_id) { | 
|  | 214 | netdev_dbg(netdev, "Only internal phy supported\n"); | 
|  | 215 | return; | 
|  | 216 | } | 
|  | 217 |  | 
|  | 218 | netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", | 
|  | 219 | phy_id, loc, val); | 
|  | 220 |  | 
|  | 221 | sr_share_write_word(dev, 1, loc, res); | 
|  | 222 | } | 
|  | 223 |  | 
|  | 224 | static u32 sr9700_get_link(struct net_device *netdev) | 
|  | 225 | { | 
|  | 226 | struct usbnet *dev = netdev_priv(netdev); | 
|  | 227 | u8 value = 0; | 
|  | 228 | int rc = 0; | 
|  | 229 |  | 
|  | 230 | /* Get the Link Status directly */ | 
|  | 231 | sr_read_reg(dev, SR_NSR, &value); | 
|  | 232 | if (value & NSR_LINKST) | 
|  | 233 | rc = 1; | 
|  | 234 |  | 
|  | 235 | return rc; | 
|  | 236 | } | 
|  | 237 |  | 
|  | 238 | static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) | 
|  | 239 | { | 
|  | 240 | struct usbnet *dev = netdev_priv(netdev); | 
|  | 241 |  | 
|  | 242 | return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); | 
|  | 243 | } | 
|  | 244 |  | 
|  | 245 | static const struct ethtool_ops sr9700_ethtool_ops = { | 
|  | 246 | .get_drvinfo	= usbnet_get_drvinfo, | 
|  | 247 | .get_link	= sr9700_get_link, | 
|  | 248 | .get_msglevel	= usbnet_get_msglevel, | 
|  | 249 | .set_msglevel	= usbnet_set_msglevel, | 
|  | 250 | .get_eeprom_len	= sr9700_get_eeprom_len, | 
|  | 251 | .get_eeprom	= sr9700_get_eeprom, | 
|  | 252 | .nway_reset	= usbnet_nway_reset, | 
|  | 253 | .get_link_ksettings	= usbnet_get_link_ksettings, | 
|  | 254 | .set_link_ksettings	= usbnet_set_link_ksettings, | 
|  | 255 | }; | 
|  | 256 |  | 
|  | 257 | static void sr9700_set_multicast(struct net_device *netdev) | 
|  | 258 | { | 
|  | 259 | struct usbnet *dev = netdev_priv(netdev); | 
|  | 260 | /* We use the 20 byte dev->data for our 8 byte filter buffer | 
|  | 261 | * to avoid allocating memory that is tricky to free later | 
|  | 262 | */ | 
|  | 263 | u8 *hashes = (u8 *)&dev->data; | 
|  | 264 | /* rx_ctl setting : enable, disable_long, disable_crc */ | 
|  | 265 | u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG; | 
|  | 266 |  | 
|  | 267 | memset(hashes, 0x00, SR_MCAST_SIZE); | 
|  | 268 | /* broadcast address */ | 
|  | 269 | hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG; | 
|  | 270 | if (netdev->flags & IFF_PROMISC) { | 
|  | 271 | rx_ctl |= RCR_PRMSC; | 
|  | 272 | } else if (netdev->flags & IFF_ALLMULTI || | 
|  | 273 | netdev_mc_count(netdev) > SR_MCAST_MAX) { | 
|  | 274 | rx_ctl |= RCR_RUNT; | 
|  | 275 | } else if (!netdev_mc_empty(netdev)) { | 
|  | 276 | struct netdev_hw_addr *ha; | 
|  | 277 |  | 
|  | 278 | netdev_for_each_mc_addr(ha, netdev) { | 
|  | 279 | u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26; | 
|  | 280 | hashes[crc >> 3] |= 1 << (crc & 0x7); | 
|  | 281 | } | 
|  | 282 | } | 
|  | 283 |  | 
|  | 284 | sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes); | 
|  | 285 | sr_write_reg_async(dev, SR_RCR, rx_ctl); | 
|  | 286 | } | 
|  | 287 |  | 
|  | 288 | static int sr9700_set_mac_address(struct net_device *netdev, void *p) | 
|  | 289 | { | 
|  | 290 | struct usbnet *dev = netdev_priv(netdev); | 
|  | 291 | struct sockaddr *addr = p; | 
|  | 292 |  | 
|  | 293 | if (!is_valid_ether_addr(addr->sa_data)) { | 
|  | 294 | netdev_err(netdev, "not setting invalid mac address %pM\n", | 
|  | 295 | addr->sa_data); | 
|  | 296 | return -EINVAL; | 
|  | 297 | } | 
|  | 298 |  | 
|  | 299 | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | 
|  | 300 | sr_write_async(dev, SR_PAR, 6, netdev->dev_addr); | 
|  | 301 |  | 
|  | 302 | return 0; | 
|  | 303 | } | 
|  | 304 |  | 
|  | 305 | static const struct net_device_ops sr9700_netdev_ops = { | 
|  | 306 | .ndo_open		= usbnet_open, | 
|  | 307 | .ndo_stop		= usbnet_stop, | 
|  | 308 | .ndo_start_xmit		= usbnet_start_xmit, | 
|  | 309 | .ndo_tx_timeout		= usbnet_tx_timeout, | 
|  | 310 | .ndo_change_mtu		= usbnet_change_mtu, | 
|  | 311 | .ndo_get_stats64	= usbnet_get_stats64, | 
|  | 312 | .ndo_validate_addr	= eth_validate_addr, | 
|  | 313 | .ndo_do_ioctl		= sr9700_ioctl, | 
|  | 314 | .ndo_set_rx_mode	= sr9700_set_multicast, | 
|  | 315 | .ndo_set_mac_address	= sr9700_set_mac_address, | 
|  | 316 | }; | 
|  | 317 |  | 
|  | 318 | static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) | 
|  | 319 | { | 
|  | 320 | struct net_device *netdev; | 
|  | 321 | struct mii_if_info *mii; | 
|  | 322 | int ret; | 
|  | 323 |  | 
|  | 324 | ret = usbnet_get_endpoints(dev, intf); | 
|  | 325 | if (ret) | 
|  | 326 | goto out; | 
|  | 327 |  | 
|  | 328 | netdev = dev->net; | 
|  | 329 |  | 
|  | 330 | netdev->netdev_ops = &sr9700_netdev_ops; | 
|  | 331 | netdev->ethtool_ops = &sr9700_ethtool_ops; | 
|  | 332 | netdev->hard_header_len += SR_TX_OVERHEAD; | 
|  | 333 | dev->hard_mtu = netdev->mtu + netdev->hard_header_len; | 
|  | 334 | /* bulkin buffer is preferably not less than 3K */ | 
|  | 335 | dev->rx_urb_size = 3072; | 
|  | 336 |  | 
|  | 337 | mii = &dev->mii; | 
|  | 338 | mii->dev = netdev; | 
|  | 339 | mii->mdio_read = sr_mdio_read; | 
|  | 340 | mii->mdio_write = sr_mdio_write; | 
|  | 341 | mii->phy_id_mask = 0x1f; | 
|  | 342 | mii->reg_num_mask = 0x1f; | 
|  | 343 |  | 
|  | 344 | sr_write_reg(dev, SR_NCR, NCR_RST); | 
|  | 345 | udelay(20); | 
|  | 346 |  | 
|  | 347 | /* read MAC | 
|  | 348 | * After Chip Power on, the Chip will reload the MAC from | 
|  | 349 | * EEPROM automatically to PAR. In case there is no EEPROM externally, | 
|  | 350 | * a default MAC address is stored in PAR for making chip work properly. | 
|  | 351 | */ | 
|  | 352 | if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) { | 
|  | 353 | netdev_err(netdev, "Error reading MAC address\n"); | 
|  | 354 | ret = -ENODEV; | 
|  | 355 | goto out; | 
|  | 356 | } | 
|  | 357 |  | 
|  | 358 | /* power up and reset phy */ | 
|  | 359 | sr_write_reg(dev, SR_PRR, PRR_PHY_RST); | 
|  | 360 | /* at least 10ms, here 20ms for safe */ | 
|  | 361 | msleep(20); | 
|  | 362 | sr_write_reg(dev, SR_PRR, 0); | 
|  | 363 | /* at least 1ms, here 2ms for reading right register */ | 
|  | 364 | udelay(2 * 1000); | 
|  | 365 |  | 
|  | 366 | /* receive broadcast packets */ | 
|  | 367 | sr9700_set_multicast(netdev); | 
|  | 368 |  | 
|  | 369 | sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET); | 
|  | 370 | sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL | | 
|  | 371 | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); | 
|  | 372 | mii_nway_restart(mii); | 
|  | 373 |  | 
|  | 374 | out: | 
|  | 375 | return ret; | 
|  | 376 | } | 
|  | 377 |  | 
|  | 378 | static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | 
|  | 379 | { | 
|  | 380 | struct sk_buff *sr_skb; | 
|  | 381 | int len; | 
|  | 382 |  | 
|  | 383 | /* skb content (packets) format : | 
|  | 384 | *                    p0            p1            p2    ......    pm | 
|  | 385 | *                 /      \ | 
|  | 386 | *            /                \ | 
|  | 387 | *        /                            \ | 
|  | 388 | *  /                                        \ | 
|  | 389 | * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn | 
|  | 390 | * | 
|  | 391 | * p0 : packet 0 | 
|  | 392 | * p0b0 : packet 0 byte 0 | 
|  | 393 | * | 
|  | 394 | * b0: rx status | 
|  | 395 | * b1: packet length (incl crc) low | 
|  | 396 | * b2: packet length (incl crc) high | 
|  | 397 | * b3..n-4: packet data | 
|  | 398 | * bn-3..bn: ethernet packet crc | 
|  | 399 | */ | 
|  | 400 | if (unlikely(skb->len < SR_RX_OVERHEAD)) { | 
|  | 401 | netdev_err(dev->net, "unexpected tiny rx frame\n"); | 
|  | 402 | return 0; | 
|  | 403 | } | 
|  | 404 |  | 
|  | 405 | /* one skb may contains multiple packets */ | 
|  | 406 | while (skb->len > SR_RX_OVERHEAD) { | 
|  | 407 | if (skb->data[0] != 0x40) | 
|  | 408 | return 0; | 
|  | 409 |  | 
|  | 410 | /* ignore the CRC length */ | 
|  | 411 | len = (skb->data[1] | (skb->data[2] << 8)) - 4; | 
|  | 412 |  | 
|  | 413 | if (len > ETH_FRAME_LEN) | 
|  | 414 | return 0; | 
|  | 415 |  | 
|  | 416 | /* the last packet of current skb */ | 
|  | 417 | if (skb->len == (len + SR_RX_OVERHEAD))	{ | 
|  | 418 | skb_pull(skb, 3); | 
|  | 419 | skb->len = len; | 
|  | 420 | skb_set_tail_pointer(skb, len); | 
|  | 421 | skb->truesize = len + sizeof(struct sk_buff); | 
|  | 422 | return 2; | 
|  | 423 | } | 
|  | 424 |  | 
|  | 425 | /* skb_clone is used for address align */ | 
|  | 426 | sr_skb = skb_clone(skb, GFP_ATOMIC); | 
|  | 427 | if (!sr_skb) | 
|  | 428 | return 0; | 
|  | 429 |  | 
|  | 430 | sr_skb->len = len; | 
|  | 431 | sr_skb->data = skb->data + 3; | 
|  | 432 | skb_set_tail_pointer(sr_skb, len); | 
|  | 433 | sr_skb->truesize = len + sizeof(struct sk_buff); | 
|  | 434 | usbnet_skb_return(dev, sr_skb); | 
|  | 435 |  | 
|  | 436 | skb_pull(skb, len + SR_RX_OVERHEAD); | 
|  | 437 | }; | 
|  | 438 |  | 
|  | 439 | return 0; | 
|  | 440 | } | 
|  | 441 |  | 
|  | 442 | static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb, | 
|  | 443 | gfp_t flags) | 
|  | 444 | { | 
|  | 445 | int len; | 
|  | 446 |  | 
|  | 447 | /* SR9700 can only send out one ethernet packet at once. | 
|  | 448 | * | 
|  | 449 | * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn | 
|  | 450 | * | 
|  | 451 | * b0: rx status | 
|  | 452 | * b1: packet length (incl crc) low | 
|  | 453 | * b2: packet length (incl crc) high | 
|  | 454 | * b3..n-4: packet data | 
|  | 455 | * bn-3..bn: ethernet packet crc | 
|  | 456 | */ | 
|  | 457 |  | 
|  | 458 | len = skb->len; | 
|  | 459 |  | 
|  | 460 | if (skb_cow_head(skb, SR_TX_OVERHEAD)) { | 
|  | 461 | dev_kfree_skb_any(skb); | 
|  | 462 | return NULL; | 
|  | 463 | } | 
|  | 464 |  | 
|  | 465 | __skb_push(skb, SR_TX_OVERHEAD); | 
|  | 466 |  | 
|  | 467 | /* usbnet adds padding if length is a multiple of packet size | 
|  | 468 | * if so, adjust length value in header | 
|  | 469 | */ | 
|  | 470 | if ((skb->len % dev->maxpacket) == 0) | 
|  | 471 | len++; | 
|  | 472 |  | 
|  | 473 | skb->data[0] = len; | 
|  | 474 | skb->data[1] = len >> 8; | 
|  | 475 |  | 
|  | 476 | return skb; | 
|  | 477 | } | 
|  | 478 |  | 
|  | 479 | static void sr9700_status(struct usbnet *dev, struct urb *urb) | 
|  | 480 | { | 
|  | 481 | int link; | 
|  | 482 | u8 *buf; | 
|  | 483 |  | 
|  | 484 | /* format: | 
|  | 485 | b0: net status | 
|  | 486 | b1: tx status 1 | 
|  | 487 | b2: tx status 2 | 
|  | 488 | b3: rx status | 
|  | 489 | b4: rx overflow | 
|  | 490 | b5: rx count | 
|  | 491 | b6: tx count | 
|  | 492 | b7: gpr | 
|  | 493 | */ | 
|  | 494 |  | 
|  | 495 | if (urb->actual_length < 8) | 
|  | 496 | return; | 
|  | 497 |  | 
|  | 498 | buf = urb->transfer_buffer; | 
|  | 499 |  | 
|  | 500 | link = !!(buf[0] & 0x40); | 
|  | 501 | if (netif_carrier_ok(dev->net) != link) { | 
|  | 502 | usbnet_link_change(dev, link, 1); | 
|  | 503 | netdev_dbg(dev->net, "Link Status is: %d\n", link); | 
|  | 504 | } | 
|  | 505 | } | 
|  | 506 |  | 
|  | 507 | static int sr9700_link_reset(struct usbnet *dev) | 
|  | 508 | { | 
|  | 509 | struct ethtool_cmd ecmd; | 
|  | 510 |  | 
|  | 511 | mii_check_media(&dev->mii, 1, 1); | 
|  | 512 | mii_ethtool_gset(&dev->mii, &ecmd); | 
|  | 513 |  | 
|  | 514 | netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n", | 
|  | 515 | ecmd.speed, ecmd.duplex); | 
|  | 516 |  | 
|  | 517 | return 0; | 
|  | 518 | } | 
|  | 519 |  | 
|  | 520 | static const struct driver_info sr9700_driver_info = { | 
|  | 521 | .description	= "CoreChip SR9700 USB Ethernet", | 
|  | 522 | .flags		= FLAG_ETHER, | 
|  | 523 | .bind		= sr9700_bind, | 
|  | 524 | .rx_fixup	= sr9700_rx_fixup, | 
|  | 525 | .tx_fixup	= sr9700_tx_fixup, | 
|  | 526 | .status		= sr9700_status, | 
|  | 527 | .link_reset	= sr9700_link_reset, | 
|  | 528 | .reset		= sr9700_link_reset, | 
|  | 529 | }; | 
|  | 530 |  | 
|  | 531 | static const struct usb_device_id products[] = { | 
|  | 532 | { | 
|  | 533 | USB_DEVICE(0x0fe6, 0x9700),	/* SR9700 device */ | 
|  | 534 | .driver_info = (unsigned long)&sr9700_driver_info, | 
|  | 535 | }, | 
|  | 536 | {},			/* END */ | 
|  | 537 | }; | 
|  | 538 |  | 
|  | 539 | MODULE_DEVICE_TABLE(usb, products); | 
|  | 540 |  | 
|  | 541 | static struct usb_driver sr9700_usb_driver = { | 
|  | 542 | .name		= "sr9700", | 
|  | 543 | .id_table	= products, | 
|  | 544 | .probe		= usbnet_probe, | 
|  | 545 | .disconnect	= usbnet_disconnect, | 
|  | 546 | .suspend	= usbnet_suspend, | 
|  | 547 | .resume		= usbnet_resume, | 
|  | 548 | .disable_hub_initiated_lpm = 1, | 
|  | 549 | }; | 
|  | 550 |  | 
|  | 551 | module_usb_driver(sr9700_usb_driver); | 
|  | 552 |  | 
|  | 553 | MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>"); | 
|  | 554 | MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/"); | 
|  | 555 | MODULE_LICENSE("GPL"); |