| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ | 
|  | 2 | /* | 
|  | 3 | * NOP USB transceiver for all USB transceiver which are either built-in | 
|  | 4 | * into USB IP or which are mostly autonomous. | 
|  | 5 | * | 
|  | 6 | * Copyright (C) 2009 Texas Instruments Inc | 
|  | 7 | * Author: Ajay Kumar Gupta <ajay.gupta@ti.com> | 
|  | 8 | * | 
|  | 9 | * Current status: | 
|  | 10 | *	This provides a "nop" transceiver for PHYs which are | 
|  | 11 | *	autonomous such as isp1504, isp1707, etc. | 
|  | 12 | */ | 
|  | 13 |  | 
|  | 14 | #include <linux/module.h> | 
|  | 15 | #include <linux/platform_device.h> | 
|  | 16 | #include <linux/dma-mapping.h> | 
|  | 17 | #include <linux/usb/gadget.h> | 
|  | 18 | #include <linux/usb/otg.h> | 
|  | 19 | #include <linux/usb/usb_phy_generic.h> | 
|  | 20 | #include <linux/slab.h> | 
|  | 21 | #include <linux/clk.h> | 
|  | 22 | #include <linux/regulator/consumer.h> | 
|  | 23 | #include <linux/of.h> | 
|  | 24 | #include <linux/of_gpio.h> | 
|  | 25 | #include <linux/gpio.h> | 
|  | 26 | #include <linux/delay.h> | 
|  | 27 |  | 
|  | 28 | #include "phy-generic.h" | 
|  | 29 |  | 
|  | 30 | #define VBUS_IRQ_FLAGS \ | 
|  | 31 | (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \ | 
|  | 32 | IRQF_ONESHOT) | 
|  | 33 |  | 
|  | 34 | struct platform_device *usb_phy_generic_register(void) | 
|  | 35 | { | 
|  | 36 | return platform_device_register_simple("usb_phy_generic", | 
|  | 37 | PLATFORM_DEVID_AUTO, NULL, 0); | 
|  | 38 | } | 
|  | 39 | EXPORT_SYMBOL_GPL(usb_phy_generic_register); | 
|  | 40 |  | 
|  | 41 | void usb_phy_generic_unregister(struct platform_device *pdev) | 
|  | 42 | { | 
|  | 43 | platform_device_unregister(pdev); | 
|  | 44 | } | 
|  | 45 | EXPORT_SYMBOL_GPL(usb_phy_generic_unregister); | 
|  | 46 |  | 
|  | 47 | static int nop_set_suspend(struct usb_phy *x, int suspend) | 
|  | 48 | { | 
|  | 49 | struct usb_phy_generic *nop = dev_get_drvdata(x->dev); | 
|  | 50 |  | 
|  | 51 | if (!IS_ERR(nop->clk)) { | 
|  | 52 | if (suspend) | 
|  | 53 | clk_disable_unprepare(nop->clk); | 
|  | 54 | else | 
|  | 55 | clk_prepare_enable(nop->clk); | 
|  | 56 | } | 
|  | 57 |  | 
|  | 58 | return 0; | 
|  | 59 | } | 
|  | 60 |  | 
|  | 61 | static void nop_reset(struct usb_phy_generic *nop) | 
|  | 62 | { | 
|  | 63 | if (!nop->gpiod_reset) | 
|  | 64 | return; | 
|  | 65 |  | 
|  | 66 | gpiod_set_value_cansleep(nop->gpiod_reset, 1); | 
|  | 67 | usleep_range(10000, 20000); | 
|  | 68 | gpiod_set_value_cansleep(nop->gpiod_reset, 0); | 
|  | 69 | } | 
|  | 70 |  | 
|  | 71 | /* interface to regulator framework */ | 
|  | 72 | static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA) | 
|  | 73 | { | 
|  | 74 | struct regulator *vbus_draw = nop->vbus_draw; | 
|  | 75 | int enabled; | 
|  | 76 | int ret; | 
|  | 77 |  | 
|  | 78 | if (!vbus_draw) | 
|  | 79 | return; | 
|  | 80 |  | 
|  | 81 | enabled = nop->vbus_draw_enabled; | 
|  | 82 | if (mA) { | 
|  | 83 | regulator_set_current_limit(vbus_draw, 0, 1000 * mA); | 
|  | 84 | if (!enabled) { | 
|  | 85 | ret = regulator_enable(vbus_draw); | 
|  | 86 | if (ret < 0) | 
|  | 87 | return; | 
|  | 88 | nop->vbus_draw_enabled = 1; | 
|  | 89 | } | 
|  | 90 | } else { | 
|  | 91 | if (enabled) { | 
|  | 92 | ret = regulator_disable(vbus_draw); | 
|  | 93 | if (ret < 0) | 
|  | 94 | return; | 
|  | 95 | nop->vbus_draw_enabled = 0; | 
|  | 96 | } | 
|  | 97 | } | 
|  | 98 | nop->mA = mA; | 
|  | 99 | } | 
|  | 100 |  | 
|  | 101 |  | 
|  | 102 | static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) | 
|  | 103 | { | 
|  | 104 | struct usb_phy_generic *nop = data; | 
|  | 105 | struct usb_otg *otg = nop->phy.otg; | 
|  | 106 | int vbus, status; | 
|  | 107 |  | 
|  | 108 | vbus = gpiod_get_value(nop->gpiod_vbus); | 
|  | 109 | if ((vbus ^ nop->vbus) == 0) | 
|  | 110 | return IRQ_HANDLED; | 
|  | 111 | nop->vbus = vbus; | 
|  | 112 |  | 
|  | 113 | if (vbus) { | 
|  | 114 | status = USB_EVENT_VBUS; | 
|  | 115 | otg->state = OTG_STATE_B_PERIPHERAL; | 
|  | 116 | nop->phy.last_event = status; | 
|  | 117 |  | 
|  | 118 | /* drawing a "unit load" is *always* OK, except for OTG */ | 
|  | 119 | nop_set_vbus_draw(nop, 100); | 
|  | 120 |  | 
|  | 121 | atomic_notifier_call_chain(&nop->phy.notifier, status, | 
|  | 122 | otg->gadget); | 
|  | 123 | } else { | 
|  | 124 | nop_set_vbus_draw(nop, 0); | 
|  | 125 |  | 
|  | 126 | status = USB_EVENT_NONE; | 
|  | 127 | otg->state = OTG_STATE_B_IDLE; | 
|  | 128 | nop->phy.last_event = status; | 
|  | 129 |  | 
|  | 130 | atomic_notifier_call_chain(&nop->phy.notifier, status, | 
|  | 131 | otg->gadget); | 
|  | 132 | } | 
|  | 133 | return IRQ_HANDLED; | 
|  | 134 | } | 
|  | 135 |  | 
|  | 136 | int usb_gen_phy_init(struct usb_phy *phy) | 
|  | 137 | { | 
|  | 138 | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); | 
|  | 139 | int ret; | 
|  | 140 |  | 
|  | 141 | if (!IS_ERR(nop->vcc)) { | 
|  | 142 | if (regulator_enable(nop->vcc)) | 
|  | 143 | dev_err(phy->dev, "Failed to enable power\n"); | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 | if (!IS_ERR(nop->clk)) { | 
|  | 147 | ret = clk_prepare_enable(nop->clk); | 
|  | 148 | if (ret) | 
|  | 149 | return ret; | 
|  | 150 | } | 
|  | 151 |  | 
|  | 152 | nop_reset(nop); | 
|  | 153 |  | 
|  | 154 | return 0; | 
|  | 155 | } | 
|  | 156 | EXPORT_SYMBOL_GPL(usb_gen_phy_init); | 
|  | 157 |  | 
|  | 158 | void usb_gen_phy_shutdown(struct usb_phy *phy) | 
|  | 159 | { | 
|  | 160 | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); | 
|  | 161 |  | 
|  | 162 | gpiod_set_value_cansleep(nop->gpiod_reset, 1); | 
|  | 163 |  | 
|  | 164 | if (!IS_ERR(nop->clk)) | 
|  | 165 | clk_disable_unprepare(nop->clk); | 
|  | 166 |  | 
|  | 167 | if (!IS_ERR(nop->vcc)) { | 
|  | 168 | if (regulator_disable(nop->vcc)) | 
|  | 169 | dev_err(phy->dev, "Failed to disable power\n"); | 
|  | 170 | } | 
|  | 171 | } | 
|  | 172 | EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown); | 
|  | 173 |  | 
|  | 174 | static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) | 
|  | 175 | { | 
|  | 176 | if (!otg) | 
|  | 177 | return -ENODEV; | 
|  | 178 |  | 
|  | 179 | if (!gadget) { | 
|  | 180 | otg->gadget = NULL; | 
|  | 181 | return -ENODEV; | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | otg->gadget = gadget; | 
|  | 185 | if (otg->state == OTG_STATE_B_PERIPHERAL) | 
|  | 186 | atomic_notifier_call_chain(&otg->usb_phy->notifier, | 
|  | 187 | USB_EVENT_VBUS, otg->gadget); | 
|  | 188 | else | 
|  | 189 | otg->state = OTG_STATE_B_IDLE; | 
|  | 190 | return 0; | 
|  | 191 | } | 
|  | 192 |  | 
|  | 193 | static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) | 
|  | 194 | { | 
|  | 195 | if (!otg) | 
|  | 196 | return -ENODEV; | 
|  | 197 |  | 
|  | 198 | if (!host) { | 
|  | 199 | otg->host = NULL; | 
|  | 200 | return -ENODEV; | 
|  | 201 | } | 
|  | 202 |  | 
|  | 203 | otg->host = host; | 
|  | 204 | return 0; | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, | 
|  | 208 | struct usb_phy_generic_platform_data *pdata) | 
|  | 209 | { | 
|  | 210 | enum usb_phy_type type = USB_PHY_TYPE_USB2; | 
|  | 211 | int err = 0; | 
|  | 212 |  | 
|  | 213 | u32 clk_rate = 0; | 
|  | 214 | bool needs_vcc = false, needs_clk = false; | 
|  | 215 |  | 
|  | 216 | if (dev->of_node) { | 
|  | 217 | struct device_node *node = dev->of_node; | 
|  | 218 |  | 
|  | 219 | if (of_property_read_u32(node, "clock-frequency", &clk_rate)) | 
|  | 220 | clk_rate = 0; | 
|  | 221 |  | 
|  | 222 | needs_vcc = of_property_read_bool(node, "vcc-supply"); | 
|  | 223 | needs_clk = of_property_read_bool(node, "clocks"); | 
|  | 224 | nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", | 
|  | 225 | GPIOD_ASIS); | 
|  | 226 | err = PTR_ERR_OR_ZERO(nop->gpiod_reset); | 
|  | 227 | if (!err) { | 
|  | 228 | nop->gpiod_vbus = devm_gpiod_get_optional(dev, | 
|  | 229 | "vbus-detect", | 
|  | 230 | GPIOD_ASIS); | 
|  | 231 | err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); | 
|  | 232 | } | 
|  | 233 | } else if (pdata) { | 
|  | 234 | type = pdata->type; | 
|  | 235 | clk_rate = pdata->clk_rate; | 
|  | 236 | needs_vcc = pdata->needs_vcc; | 
|  | 237 | if (gpio_is_valid(pdata->gpio_reset)) { | 
|  | 238 | err = devm_gpio_request_one(dev, pdata->gpio_reset, | 
|  | 239 | GPIOF_ACTIVE_LOW, | 
|  | 240 | dev_name(dev)); | 
|  | 241 | if (!err) | 
|  | 242 | nop->gpiod_reset = | 
|  | 243 | gpio_to_desc(pdata->gpio_reset); | 
|  | 244 | } | 
|  | 245 | nop->gpiod_vbus = pdata->gpiod_vbus; | 
|  | 246 | } | 
|  | 247 |  | 
|  | 248 | if (err == -EPROBE_DEFER) | 
|  | 249 | return -EPROBE_DEFER; | 
|  | 250 | if (err) { | 
|  | 251 | dev_err(dev, "Error requesting RESET or VBUS GPIO\n"); | 
|  | 252 | return err; | 
|  | 253 | } | 
|  | 254 | if (nop->gpiod_reset) | 
|  | 255 | gpiod_direction_output(nop->gpiod_reset, 1); | 
|  | 256 |  | 
|  | 257 | nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), | 
|  | 258 | GFP_KERNEL); | 
|  | 259 | if (!nop->phy.otg) | 
|  | 260 | return -ENOMEM; | 
|  | 261 |  | 
|  | 262 | nop->clk = devm_clk_get(dev, "main_clk"); | 
|  | 263 | if (IS_ERR(nop->clk)) { | 
|  | 264 | dev_dbg(dev, "Can't get phy clock: %ld\n", | 
|  | 265 | PTR_ERR(nop->clk)); | 
|  | 266 | if (needs_clk) | 
|  | 267 | return PTR_ERR(nop->clk); | 
|  | 268 | } | 
|  | 269 |  | 
|  | 270 | if (!IS_ERR(nop->clk) && clk_rate) { | 
|  | 271 | err = clk_set_rate(nop->clk, clk_rate); | 
|  | 272 | if (err) { | 
|  | 273 | dev_err(dev, "Error setting clock rate\n"); | 
|  | 274 | return err; | 
|  | 275 | } | 
|  | 276 | } | 
|  | 277 |  | 
|  | 278 | nop->vcc = devm_regulator_get(dev, "vcc"); | 
|  | 279 | if (IS_ERR(nop->vcc)) { | 
|  | 280 | dev_dbg(dev, "Error getting vcc regulator: %ld\n", | 
|  | 281 | PTR_ERR(nop->vcc)); | 
|  | 282 | if (needs_vcc) | 
|  | 283 | return -EPROBE_DEFER; | 
|  | 284 | } | 
|  | 285 |  | 
|  | 286 | nop->dev		= dev; | 
|  | 287 | nop->phy.dev		= nop->dev; | 
|  | 288 | nop->phy.label		= "nop-xceiv"; | 
|  | 289 | nop->phy.set_suspend	= nop_set_suspend; | 
|  | 290 | nop->phy.type		= type; | 
|  | 291 |  | 
|  | 292 | nop->phy.otg->state		= OTG_STATE_UNDEFINED; | 
|  | 293 | nop->phy.otg->usb_phy		= &nop->phy; | 
|  | 294 | nop->phy.otg->set_host		= nop_set_host; | 
|  | 295 | nop->phy.otg->set_peripheral	= nop_set_peripheral; | 
|  | 296 |  | 
|  | 297 | return 0; | 
|  | 298 | } | 
|  | 299 | EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); | 
|  | 300 |  | 
|  | 301 | static int usb_phy_generic_probe(struct platform_device *pdev) | 
|  | 302 | { | 
|  | 303 | struct device *dev = &pdev->dev; | 
|  | 304 | struct usb_phy_generic	*nop; | 
|  | 305 | int err; | 
|  | 306 |  | 
|  | 307 | nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); | 
|  | 308 | if (!nop) | 
|  | 309 | return -ENOMEM; | 
|  | 310 |  | 
|  | 311 | err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); | 
|  | 312 | if (err) | 
|  | 313 | return err; | 
|  | 314 | if (nop->gpiod_vbus) { | 
|  | 315 | err = devm_request_threaded_irq(&pdev->dev, | 
|  | 316 | gpiod_to_irq(nop->gpiod_vbus), | 
|  | 317 | NULL, nop_gpio_vbus_thread, | 
|  | 318 | VBUS_IRQ_FLAGS, "vbus_detect", | 
|  | 319 | nop); | 
|  | 320 | if (err) { | 
|  | 321 | dev_err(&pdev->dev, "can't request irq %i, err: %d\n", | 
|  | 322 | gpiod_to_irq(nop->gpiod_vbus), err); | 
|  | 323 | return err; | 
|  | 324 | } | 
|  | 325 | nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ? | 
|  | 326 | OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE; | 
|  | 327 | } | 
|  | 328 |  | 
|  | 329 | nop->phy.init		= usb_gen_phy_init; | 
|  | 330 | nop->phy.shutdown	= usb_gen_phy_shutdown; | 
|  | 331 |  | 
|  | 332 | err = usb_add_phy_dev(&nop->phy); | 
|  | 333 | if (err) { | 
|  | 334 | dev_err(&pdev->dev, "can't register transceiver, err: %d\n", | 
|  | 335 | err); | 
|  | 336 | return err; | 
|  | 337 | } | 
|  | 338 |  | 
|  | 339 | platform_set_drvdata(pdev, nop); | 
|  | 340 |  | 
|  | 341 | return 0; | 
|  | 342 | } | 
|  | 343 |  | 
|  | 344 | static int usb_phy_generic_remove(struct platform_device *pdev) | 
|  | 345 | { | 
|  | 346 | struct usb_phy_generic *nop = platform_get_drvdata(pdev); | 
|  | 347 |  | 
|  | 348 | usb_remove_phy(&nop->phy); | 
|  | 349 |  | 
|  | 350 | return 0; | 
|  | 351 | } | 
|  | 352 |  | 
|  | 353 | static const struct of_device_id nop_xceiv_dt_ids[] = { | 
|  | 354 | { .compatible = "usb-nop-xceiv" }, | 
|  | 355 | { } | 
|  | 356 | }; | 
|  | 357 |  | 
|  | 358 | MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); | 
|  | 359 |  | 
|  | 360 | static struct platform_driver usb_phy_generic_driver = { | 
|  | 361 | .probe		= usb_phy_generic_probe, | 
|  | 362 | .remove		= usb_phy_generic_remove, | 
|  | 363 | .driver		= { | 
|  | 364 | .name	= "usb_phy_generic", | 
|  | 365 | .of_match_table = nop_xceiv_dt_ids, | 
|  | 366 | }, | 
|  | 367 | }; | 
|  | 368 |  | 
|  | 369 | static int __init usb_phy_generic_init(void) | 
|  | 370 | { | 
|  | 371 | return platform_driver_register(&usb_phy_generic_driver); | 
|  | 372 | } | 
|  | 373 | subsys_initcall(usb_phy_generic_init); | 
|  | 374 |  | 
|  | 375 | static void __exit usb_phy_generic_exit(void) | 
|  | 376 | { | 
|  | 377 | platform_driver_unregister(&usb_phy_generic_driver); | 
|  | 378 | } | 
|  | 379 | module_exit(usb_phy_generic_exit); | 
|  | 380 |  | 
|  | 381 | MODULE_ALIAS("platform:usb_phy_generic"); | 
|  | 382 | MODULE_AUTHOR("Texas Instruments Inc"); | 
|  | 383 | MODULE_DESCRIPTION("NOP USB Transceiver driver"); | 
|  | 384 | MODULE_LICENSE("GPL"); |