| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |  * I2C multiplexer | 
 | 3 |  * | 
 | 4 |  * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it> | 
 | 5 |  * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it> | 
 | 6 |  * | 
 | 7 |  * This module supports the PCA954x and PCA954x series of I2C multiplexer/switch | 
 | 8 |  * chips made by NXP Semiconductors. | 
 | 9 |  * This includes the: | 
 | 10 |  *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547, | 
 | 11 |  *	 PCA9548, PCA9846, PCA9847, PCA9848 and PCA9849. | 
 | 12 |  * | 
 | 13 |  * These chips are all controlled via the I2C bus itself, and all have a | 
 | 14 |  * single 8-bit register. The upstream "parent" bus fans out to two, | 
 | 15 |  * four, or eight downstream busses or channels; which of these | 
 | 16 |  * are selected is determined by the chip type and register contents. A | 
 | 17 |  * mux can select only one sub-bus at a time; a switch can select any | 
 | 18 |  * combination simultaneously. | 
 | 19 |  * | 
 | 20 |  * Based on: | 
 | 21 |  *	pca954x.c from Kumar Gala <galak@kernel.crashing.org> | 
 | 22 |  * Copyright (C) 2006 | 
 | 23 |  * | 
 | 24 |  * Based on: | 
 | 25 |  *	pca954x.c from Ken Harrenstien | 
 | 26 |  * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) | 
 | 27 |  * | 
 | 28 |  * Based on: | 
 | 29 |  *	i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com> | 
 | 30 |  * and | 
 | 31 |  *	pca9540.c from Jean Delvare <jdelvare@suse.de>. | 
 | 32 |  * | 
 | 33 |  * This file is licensed under the terms of the GNU General Public | 
 | 34 |  * License version 2. This program is licensed "as is" without any | 
 | 35 |  * warranty of any kind, whether express or implied. | 
 | 36 |  */ | 
 | 37 |  | 
 | 38 | #include <linux/device.h> | 
 | 39 | #include <linux/delay.h> | 
 | 40 | #include <linux/gpio/consumer.h> | 
 | 41 | #include <linux/i2c.h> | 
 | 42 | #include <linux/i2c-mux.h> | 
 | 43 | #include <linux/interrupt.h> | 
 | 44 | #include <linux/irq.h> | 
 | 45 | #include <linux/module.h> | 
 | 46 | #include <linux/of.h> | 
 | 47 | #include <linux/of_device.h> | 
 | 48 | #include <linux/of_irq.h> | 
 | 49 | #include <linux/platform_data/pca954x.h> | 
 | 50 | #include <linux/pm.h> | 
 | 51 | #include <linux/slab.h> | 
 | 52 | #include <linux/spinlock.h> | 
 | 53 |  | 
 | 54 | #define PCA954X_MAX_NCHANS 8 | 
 | 55 |  | 
 | 56 | #define PCA954X_IRQ_OFFSET 4 | 
 | 57 |  | 
 | 58 | enum pca_type { | 
 | 59 | 	pca_9540, | 
 | 60 | 	pca_9542, | 
 | 61 | 	pca_9543, | 
 | 62 | 	pca_9544, | 
 | 63 | 	pca_9545, | 
 | 64 | 	pca_9546, | 
 | 65 | 	pca_9547, | 
 | 66 | 	pca_9548, | 
 | 67 | 	pca_9846, | 
 | 68 | 	pca_9847, | 
 | 69 | 	pca_9848, | 
 | 70 | 	pca_9849, | 
 | 71 | }; | 
 | 72 |  | 
 | 73 | struct chip_desc { | 
 | 74 | 	u8 nchans; | 
 | 75 | 	u8 enable;	/* used for muxes only */ | 
 | 76 | 	u8 has_irq; | 
 | 77 | 	enum muxtype { | 
 | 78 | 		pca954x_ismux = 0, | 
 | 79 | 		pca954x_isswi | 
 | 80 | 	} muxtype; | 
 | 81 | 	struct i2c_device_identity id; | 
 | 82 | }; | 
 | 83 |  | 
 | 84 | struct pca954x { | 
 | 85 | 	const struct chip_desc *chip; | 
 | 86 |  | 
 | 87 | 	u8 last_chan;		/* last register value */ | 
 | 88 | 	u8 deselect; | 
 | 89 | 	struct i2c_client *client; | 
 | 90 |  | 
 | 91 | 	struct irq_domain *irq; | 
 | 92 | 	unsigned int irq_mask; | 
 | 93 | 	raw_spinlock_t lock; | 
 | 94 | }; | 
 | 95 |  | 
 | 96 | /* Provide specs for the PCA954x types we know about */ | 
 | 97 | static const struct chip_desc chips[] = { | 
 | 98 | 	[pca_9540] = { | 
 | 99 | 		.nchans = 2, | 
 | 100 | 		.enable = 0x4, | 
 | 101 | 		.muxtype = pca954x_ismux, | 
 | 102 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 103 | 	}, | 
 | 104 | 	[pca_9542] = { | 
 | 105 | 		.nchans = 2, | 
 | 106 | 		.enable = 0x4, | 
 | 107 | 		.has_irq = 1, | 
 | 108 | 		.muxtype = pca954x_ismux, | 
 | 109 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 110 | 	}, | 
 | 111 | 	[pca_9543] = { | 
 | 112 | 		.nchans = 2, | 
 | 113 | 		.has_irq = 1, | 
 | 114 | 		.muxtype = pca954x_isswi, | 
 | 115 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 116 | 	}, | 
 | 117 | 	[pca_9544] = { | 
 | 118 | 		.nchans = 4, | 
 | 119 | 		.enable = 0x4, | 
 | 120 | 		.has_irq = 1, | 
 | 121 | 		.muxtype = pca954x_ismux, | 
 | 122 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 123 | 	}, | 
 | 124 | 	[pca_9545] = { | 
 | 125 | 		.nchans = 4, | 
 | 126 | 		.has_irq = 1, | 
 | 127 | 		.muxtype = pca954x_isswi, | 
 | 128 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 129 | 	}, | 
 | 130 | 	[pca_9546] = { | 
 | 131 | 		.nchans = 4, | 
 | 132 | 		.muxtype = pca954x_isswi, | 
 | 133 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 134 | 	}, | 
 | 135 | 	[pca_9547] = { | 
 | 136 | 		.nchans = 8, | 
 | 137 | 		.enable = 0x8, | 
 | 138 | 		.muxtype = pca954x_ismux, | 
 | 139 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 140 | 	}, | 
 | 141 | 	[pca_9548] = { | 
 | 142 | 		.nchans = 8, | 
 | 143 | 		.muxtype = pca954x_isswi, | 
 | 144 | 		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE }, | 
 | 145 | 	}, | 
 | 146 | 	[pca_9846] = { | 
 | 147 | 		.nchans = 4, | 
 | 148 | 		.muxtype = pca954x_isswi, | 
 | 149 | 		.id = { | 
 | 150 | 			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, | 
 | 151 | 			.part_id = 0x10b, | 
 | 152 | 		}, | 
 | 153 | 	}, | 
 | 154 | 	[pca_9847] = { | 
 | 155 | 		.nchans = 8, | 
 | 156 | 		.enable = 0x8, | 
 | 157 | 		.muxtype = pca954x_ismux, | 
 | 158 | 		.id = { | 
 | 159 | 			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, | 
 | 160 | 			.part_id = 0x108, | 
 | 161 | 		}, | 
 | 162 | 	}, | 
 | 163 | 	[pca_9848] = { | 
 | 164 | 		.nchans = 8, | 
 | 165 | 		.muxtype = pca954x_isswi, | 
 | 166 | 		.id = { | 
 | 167 | 			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, | 
 | 168 | 			.part_id = 0x10a, | 
 | 169 | 		}, | 
 | 170 | 	}, | 
 | 171 | 	[pca_9849] = { | 
 | 172 | 		.nchans = 4, | 
 | 173 | 		.enable = 0x4, | 
 | 174 | 		.muxtype = pca954x_ismux, | 
 | 175 | 		.id = { | 
 | 176 | 			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS, | 
 | 177 | 			.part_id = 0x109, | 
 | 178 | 		}, | 
 | 179 | 	}, | 
 | 180 | }; | 
 | 181 |  | 
 | 182 | static const struct i2c_device_id pca954x_id[] = { | 
 | 183 | 	{ "pca9540", pca_9540 }, | 
 | 184 | 	{ "pca9542", pca_9542 }, | 
 | 185 | 	{ "pca9543", pca_9543 }, | 
 | 186 | 	{ "pca9544", pca_9544 }, | 
 | 187 | 	{ "pca9545", pca_9545 }, | 
 | 188 | 	{ "pca9546", pca_9546 }, | 
 | 189 | 	{ "pca9547", pca_9547 }, | 
 | 190 | 	{ "pca9548", pca_9548 }, | 
 | 191 | 	{ "pca9846", pca_9846 }, | 
 | 192 | 	{ "pca9847", pca_9847 }, | 
 | 193 | 	{ "pca9848", pca_9848 }, | 
 | 194 | 	{ "pca9849", pca_9849 }, | 
 | 195 | 	{ } | 
 | 196 | }; | 
 | 197 | MODULE_DEVICE_TABLE(i2c, pca954x_id); | 
 | 198 |  | 
 | 199 | #ifdef CONFIG_OF | 
 | 200 | static const struct of_device_id pca954x_of_match[] = { | 
 | 201 | 	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] }, | 
 | 202 | 	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] }, | 
 | 203 | 	{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] }, | 
 | 204 | 	{ .compatible = "nxp,pca9544", .data = &chips[pca_9544] }, | 
 | 205 | 	{ .compatible = "nxp,pca9545", .data = &chips[pca_9545] }, | 
 | 206 | 	{ .compatible = "nxp,pca9546", .data = &chips[pca_9546] }, | 
 | 207 | 	{ .compatible = "nxp,pca9547", .data = &chips[pca_9547] }, | 
 | 208 | 	{ .compatible = "nxp,pca9548", .data = &chips[pca_9548] }, | 
 | 209 | 	{ .compatible = "nxp,pca9846", .data = &chips[pca_9846] }, | 
 | 210 | 	{ .compatible = "nxp,pca9847", .data = &chips[pca_9847] }, | 
 | 211 | 	{ .compatible = "nxp,pca9848", .data = &chips[pca_9848] }, | 
 | 212 | 	{ .compatible = "nxp,pca9849", .data = &chips[pca_9849] }, | 
 | 213 | 	{} | 
 | 214 | }; | 
 | 215 | MODULE_DEVICE_TABLE(of, pca954x_of_match); | 
 | 216 | #endif | 
 | 217 |  | 
 | 218 | /* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer() | 
 | 219 |    for this as they will try to lock adapter a second time */ | 
 | 220 | static int pca954x_reg_write(struct i2c_adapter *adap, | 
 | 221 | 			     struct i2c_client *client, u8 val) | 
 | 222 | { | 
 | 223 | 	union i2c_smbus_data dummy; | 
 | 224 |  | 
 | 225 | 	return __i2c_smbus_xfer(adap, client->addr, client->flags, | 
 | 226 | 				I2C_SMBUS_WRITE, val, | 
 | 227 | 				I2C_SMBUS_BYTE, &dummy); | 
 | 228 | } | 
 | 229 |  | 
 | 230 | static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan) | 
 | 231 | { | 
 | 232 | 	struct pca954x *data = i2c_mux_priv(muxc); | 
 | 233 | 	struct i2c_client *client = data->client; | 
 | 234 | 	const struct chip_desc *chip = data->chip; | 
 | 235 | 	u8 regval; | 
 | 236 | 	int ret = 0; | 
 | 237 |  | 
 | 238 | 	/* we make switches look like muxes, not sure how to be smarter */ | 
 | 239 | 	if (chip->muxtype == pca954x_ismux) | 
 | 240 | 		regval = chan | chip->enable; | 
 | 241 | 	else | 
 | 242 | 		regval = 1 << chan; | 
 | 243 |  | 
 | 244 | 	/* Only select the channel if its different from the last channel */ | 
 | 245 | 	if (data->last_chan != regval) { | 
 | 246 | 		ret = pca954x_reg_write(muxc->parent, client, regval); | 
 | 247 | 		data->last_chan = ret < 0 ? 0 : regval; | 
 | 248 | 	} | 
 | 249 |  | 
 | 250 | 	return ret; | 
 | 251 | } | 
 | 252 |  | 
 | 253 | static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan) | 
 | 254 | { | 
 | 255 | 	struct pca954x *data = i2c_mux_priv(muxc); | 
 | 256 | 	struct i2c_client *client = data->client; | 
 | 257 |  | 
 | 258 | 	if (!(data->deselect & (1 << chan))) | 
 | 259 | 		return 0; | 
 | 260 |  | 
 | 261 | 	/* Deselect active channel */ | 
 | 262 | 	data->last_chan = 0; | 
 | 263 | 	return pca954x_reg_write(muxc->parent, client, data->last_chan); | 
 | 264 | } | 
 | 265 |  | 
 | 266 | static irqreturn_t pca954x_irq_handler(int irq, void *dev_id) | 
 | 267 | { | 
 | 268 | 	struct pca954x *data = dev_id; | 
 | 269 | 	unsigned int child_irq; | 
 | 270 | 	int ret, i, handled = 0; | 
 | 271 |  | 
 | 272 | 	ret = i2c_smbus_read_byte(data->client); | 
 | 273 | 	if (ret < 0) | 
 | 274 | 		return IRQ_NONE; | 
 | 275 |  | 
 | 276 | 	for (i = 0; i < data->chip->nchans; i++) { | 
 | 277 | 		if (ret & BIT(PCA954X_IRQ_OFFSET + i)) { | 
 | 278 | 			child_irq = irq_linear_revmap(data->irq, i); | 
 | 279 | 			handle_nested_irq(child_irq); | 
 | 280 | 			handled++; | 
 | 281 | 		} | 
 | 282 | 	} | 
 | 283 | 	return handled ? IRQ_HANDLED : IRQ_NONE; | 
 | 284 | } | 
 | 285 |  | 
 | 286 | static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type) | 
 | 287 | { | 
 | 288 | 	if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW) | 
 | 289 | 		return -EINVAL; | 
 | 290 | 	return 0; | 
 | 291 | } | 
 | 292 |  | 
 | 293 | static struct irq_chip pca954x_irq_chip = { | 
 | 294 | 	.name = "i2c-mux-pca954x", | 
 | 295 | 	.irq_set_type = pca954x_irq_set_type, | 
 | 296 | }; | 
 | 297 |  | 
 | 298 | static int pca954x_irq_setup(struct i2c_mux_core *muxc) | 
 | 299 | { | 
 | 300 | 	struct pca954x *data = i2c_mux_priv(muxc); | 
 | 301 | 	struct i2c_client *client = data->client; | 
 | 302 | 	int c, irq; | 
 | 303 |  | 
 | 304 | 	if (!data->chip->has_irq || client->irq <= 0) | 
 | 305 | 		return 0; | 
 | 306 |  | 
 | 307 | 	raw_spin_lock_init(&data->lock); | 
 | 308 |  | 
 | 309 | 	data->irq = irq_domain_add_linear(client->dev.of_node, | 
 | 310 | 					  data->chip->nchans, | 
 | 311 | 					  &irq_domain_simple_ops, data); | 
 | 312 | 	if (!data->irq) | 
 | 313 | 		return -ENODEV; | 
 | 314 |  | 
 | 315 | 	for (c = 0; c < data->chip->nchans; c++) { | 
 | 316 | 		irq = irq_create_mapping(data->irq, c); | 
 | 317 | 		if (!irq) { | 
 | 318 | 			dev_err(&client->dev, "failed irq create map\n"); | 
 | 319 | 			return -EINVAL; | 
 | 320 | 		} | 
 | 321 | 		irq_set_chip_data(irq, data); | 
 | 322 | 		irq_set_chip_and_handler(irq, &pca954x_irq_chip, | 
 | 323 | 			handle_simple_irq); | 
 | 324 | 	} | 
 | 325 |  | 
 | 326 | 	return 0; | 
 | 327 | } | 
 | 328 |  | 
 | 329 | static void pca954x_cleanup(struct i2c_mux_core *muxc) | 
 | 330 | { | 
 | 331 | 	struct pca954x *data = i2c_mux_priv(muxc); | 
 | 332 | 	int c, irq; | 
 | 333 |  | 
 | 334 | 	if (data->irq) { | 
 | 335 | 		for (c = 0; c < data->chip->nchans; c++) { | 
 | 336 | 			irq = irq_find_mapping(data->irq, c); | 
 | 337 | 			irq_dispose_mapping(irq); | 
 | 338 | 		} | 
 | 339 | 		irq_domain_remove(data->irq); | 
 | 340 | 	} | 
 | 341 | 	i2c_mux_del_adapters(muxc); | 
 | 342 | } | 
 | 343 |  | 
 | 344 | /* | 
 | 345 |  * I2C init/probing/exit functions | 
 | 346 |  */ | 
 | 347 | static int pca954x_probe(struct i2c_client *client, | 
 | 348 | 			 const struct i2c_device_id *id) | 
 | 349 | { | 
 | 350 | 	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); | 
 | 351 | 	struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev); | 
 | 352 | 	struct device *dev = &client->dev; | 
 | 353 | 	struct device_node *np = dev->of_node; | 
 | 354 | 	bool idle_disconnect_dt; | 
 | 355 | 	struct gpio_desc *gpio; | 
 | 356 | 	int num, force, class; | 
 | 357 | 	struct i2c_mux_core *muxc; | 
 | 358 | 	struct pca954x *data; | 
 | 359 | 	int ret; | 
 | 360 |  | 
 | 361 | 	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) | 
 | 362 | 		return -ENODEV; | 
 | 363 |  | 
 | 364 | 	muxc = i2c_mux_alloc(adap, dev, PCA954X_MAX_NCHANS, sizeof(*data), 0, | 
 | 365 | 			     pca954x_select_chan, pca954x_deselect_mux); | 
 | 366 | 	if (!muxc) | 
 | 367 | 		return -ENOMEM; | 
 | 368 | 	data = i2c_mux_priv(muxc); | 
 | 369 |  | 
 | 370 | 	i2c_set_clientdata(client, muxc); | 
 | 371 | 	data->client = client; | 
 | 372 |  | 
 | 373 | 	/* Reset the mux if a reset GPIO is specified. */ | 
 | 374 | 	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); | 
 | 375 | 	if (IS_ERR(gpio)) | 
 | 376 | 		return PTR_ERR(gpio); | 
 | 377 | 	if (gpio) { | 
 | 378 | 		udelay(1); | 
 | 379 | 		gpiod_set_value_cansleep(gpio, 0); | 
 | 380 | 		/* Give the chip some time to recover. */ | 
 | 381 | 		udelay(1); | 
 | 382 | 	} | 
 | 383 |  | 
 | 384 | 	data->chip = of_device_get_match_data(dev); | 
 | 385 | 	if (!data->chip) | 
 | 386 | 		data->chip = &chips[id->driver_data]; | 
 | 387 |  | 
 | 388 | 	if (data->chip->id.manufacturer_id != I2C_DEVICE_ID_NONE) { | 
 | 389 | 		struct i2c_device_identity id; | 
 | 390 |  | 
 | 391 | 		ret = i2c_get_device_id(client, &id); | 
 | 392 | 		if (ret && ret != -EOPNOTSUPP) | 
 | 393 | 			return ret; | 
 | 394 |  | 
 | 395 | 		if (!ret && | 
 | 396 | 		    (id.manufacturer_id != data->chip->id.manufacturer_id || | 
 | 397 | 		     id.part_id != data->chip->id.part_id)) { | 
 | 398 | 			dev_warn(dev, "unexpected device id %03x-%03x-%x\n", | 
 | 399 | 				 id.manufacturer_id, id.part_id, | 
 | 400 | 				 id.die_revision); | 
 | 401 | 			return -ENODEV; | 
 | 402 | 		} | 
 | 403 | 	} | 
 | 404 |  | 
 | 405 | 	/* Write the mux register at addr to verify | 
 | 406 | 	 * that the mux is in fact present. This also | 
 | 407 | 	 * initializes the mux to disconnected state. | 
 | 408 | 	 */ | 
 | 409 | 	if (i2c_smbus_write_byte(client, 0) < 0) { | 
 | 410 | 		dev_warn(dev, "probe failed\n"); | 
 | 411 | 		return -ENODEV; | 
 | 412 | 	} | 
 | 413 |  | 
 | 414 | 	data->last_chan = 0;		   /* force the first selection */ | 
 | 415 |  | 
 | 416 | 	idle_disconnect_dt = np && | 
 | 417 | 		of_property_read_bool(np, "i2c-mux-idle-disconnect"); | 
 | 418 |  | 
 | 419 | 	ret = pca954x_irq_setup(muxc); | 
 | 420 | 	if (ret) | 
 | 421 | 		goto fail_cleanup; | 
 | 422 |  | 
 | 423 | 	/* Now create an adapter for each channel */ | 
 | 424 | 	for (num = 0; num < data->chip->nchans; num++) { | 
 | 425 | 		bool idle_disconnect_pd = false; | 
 | 426 |  | 
 | 427 | 		force = 0;			  /* dynamic adap number */ | 
 | 428 | 		class = 0;			  /* no class by default */ | 
 | 429 | 		if (pdata) { | 
 | 430 | 			if (num < pdata->num_modes) { | 
 | 431 | 				/* force static number */ | 
 | 432 | 				force = pdata->modes[num].adap_id; | 
 | 433 | 				class = pdata->modes[num].class; | 
 | 434 | 			} else | 
 | 435 | 				/* discard unconfigured channels */ | 
 | 436 | 				break; | 
 | 437 | 			idle_disconnect_pd = pdata->modes[num].deselect_on_exit; | 
 | 438 | 		} | 
 | 439 | 		data->deselect |= (idle_disconnect_pd || | 
 | 440 | 				   idle_disconnect_dt) << num; | 
 | 441 |  | 
 | 442 | 		ret = i2c_mux_add_adapter(muxc, force, num, class); | 
 | 443 | 		if (ret) | 
 | 444 | 			goto fail_cleanup; | 
 | 445 | 	} | 
 | 446 |  | 
 | 447 | 	if (data->irq) { | 
 | 448 | 		ret = devm_request_threaded_irq(dev, data->client->irq, | 
 | 449 | 						NULL, pca954x_irq_handler, | 
 | 450 | 						IRQF_ONESHOT | IRQF_SHARED, | 
 | 451 | 						"pca954x", data); | 
 | 452 | 		if (ret) | 
 | 453 | 			goto fail_cleanup; | 
 | 454 | 	} | 
 | 455 |  | 
 | 456 | 	dev_info(dev, "registered %d multiplexed busses for I2C %s %s\n", | 
 | 457 | 		 num, data->chip->muxtype == pca954x_ismux | 
 | 458 | 				? "mux" : "switch", client->name); | 
 | 459 |  | 
 | 460 | 	return 0; | 
 | 461 |  | 
 | 462 | fail_cleanup: | 
 | 463 | 	pca954x_cleanup(muxc); | 
 | 464 | 	return ret; | 
 | 465 | } | 
 | 466 |  | 
 | 467 | static int pca954x_remove(struct i2c_client *client) | 
 | 468 | { | 
 | 469 | 	struct i2c_mux_core *muxc = i2c_get_clientdata(client); | 
 | 470 |  | 
 | 471 | 	pca954x_cleanup(muxc); | 
 | 472 | 	return 0; | 
 | 473 | } | 
 | 474 |  | 
 | 475 | #ifdef CONFIG_PM_SLEEP | 
 | 476 | static int pca954x_resume(struct device *dev) | 
 | 477 | { | 
 | 478 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 479 | 	struct i2c_mux_core *muxc = i2c_get_clientdata(client); | 
 | 480 | 	struct pca954x *data = i2c_mux_priv(muxc); | 
 | 481 |  | 
 | 482 | 	data->last_chan = 0; | 
 | 483 | 	return i2c_smbus_write_byte(client, 0); | 
 | 484 | } | 
 | 485 | #endif | 
 | 486 |  | 
 | 487 | static SIMPLE_DEV_PM_OPS(pca954x_pm, NULL, pca954x_resume); | 
 | 488 |  | 
 | 489 | static struct i2c_driver pca954x_driver = { | 
 | 490 | 	.driver		= { | 
 | 491 | 		.name	= "pca954x", | 
 | 492 | 		.pm	= &pca954x_pm, | 
 | 493 | 		.of_match_table = of_match_ptr(pca954x_of_match), | 
 | 494 | 	}, | 
 | 495 | 	.probe		= pca954x_probe, | 
 | 496 | 	.remove		= pca954x_remove, | 
 | 497 | 	.id_table	= pca954x_id, | 
 | 498 | }; | 
 | 499 |  | 
 | 500 | module_i2c_driver(pca954x_driver); | 
 | 501 |  | 
 | 502 | MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); | 
 | 503 | MODULE_DESCRIPTION("PCA954x I2C mux/switch driver"); | 
 | 504 | MODULE_LICENSE("GPL v2"); |