| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 | 
 | 2 | /* | 
 | 3 |  * OHCI HCD (Host Controller Driver) for USB. | 
 | 4 |  * | 
 | 5 |  * TI DA8xx (OMAP-L1x) Bus Glue | 
 | 6 |  * | 
 | 7 |  * Derived from: ohci-omap.c and ohci-s3c2410.c | 
 | 8 |  * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> | 
 | 9 |  */ | 
 | 10 |  | 
 | 11 | #include <linux/clk.h> | 
 | 12 | #include <linux/io.h> | 
 | 13 | #include <linux/interrupt.h> | 
 | 14 | #include <linux/jiffies.h> | 
 | 15 | #include <linux/kernel.h> | 
 | 16 | #include <linux/module.h> | 
 | 17 | #include <linux/platform_device.h> | 
 | 18 | #include <linux/phy/phy.h> | 
 | 19 | #include <linux/platform_data/usb-davinci.h> | 
 | 20 | #include <linux/regulator/consumer.h> | 
 | 21 | #include <linux/usb.h> | 
 | 22 | #include <linux/usb/hcd.h> | 
 | 23 | #include <asm/unaligned.h> | 
 | 24 |  | 
 | 25 | #include "ohci.h" | 
 | 26 |  | 
 | 27 | #define DRIVER_DESC "DA8XX" | 
 | 28 | #define DRV_NAME "ohci-da8xx" | 
 | 29 |  | 
 | 30 | static struct hc_driver __read_mostly ohci_da8xx_hc_driver; | 
 | 31 |  | 
 | 32 | static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq, | 
 | 33 | 			u16 wValue, u16 wIndex, char *buf, u16 wLength); | 
 | 34 | static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); | 
 | 35 |  | 
 | 36 | struct da8xx_ohci_hcd { | 
 | 37 | 	struct usb_hcd *hcd; | 
 | 38 | 	struct clk *usb11_clk; | 
 | 39 | 	struct phy *usb11_phy; | 
 | 40 | 	struct regulator *vbus_reg; | 
 | 41 | 	struct notifier_block nb; | 
 | 42 | 	unsigned int reg_enabled; | 
 | 43 | }; | 
 | 44 |  | 
 | 45 | #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) | 
 | 46 |  | 
 | 47 | /* Over-current indicator change bitmask */ | 
 | 48 | static volatile u16 ocic_mask; | 
 | 49 |  | 
 | 50 | static int ohci_da8xx_enable(struct usb_hcd *hcd) | 
 | 51 | { | 
 | 52 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 53 | 	int ret; | 
 | 54 |  | 
 | 55 | 	ret = clk_prepare_enable(da8xx_ohci->usb11_clk); | 
 | 56 | 	if (ret) | 
 | 57 | 		return ret; | 
 | 58 |  | 
 | 59 | 	ret = phy_init(da8xx_ohci->usb11_phy); | 
 | 60 | 	if (ret) | 
 | 61 | 		goto err_phy_init; | 
 | 62 |  | 
 | 63 | 	ret = phy_power_on(da8xx_ohci->usb11_phy); | 
 | 64 | 	if (ret) | 
 | 65 | 		goto err_phy_power_on; | 
 | 66 |  | 
 | 67 | 	return 0; | 
 | 68 |  | 
 | 69 | err_phy_power_on: | 
 | 70 | 	phy_exit(da8xx_ohci->usb11_phy); | 
 | 71 | err_phy_init: | 
 | 72 | 	clk_disable_unprepare(da8xx_ohci->usb11_clk); | 
 | 73 |  | 
 | 74 | 	return ret; | 
 | 75 | } | 
 | 76 |  | 
 | 77 | static void ohci_da8xx_disable(struct usb_hcd *hcd) | 
 | 78 | { | 
 | 79 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 80 |  | 
 | 81 | 	phy_power_off(da8xx_ohci->usb11_phy); | 
 | 82 | 	phy_exit(da8xx_ohci->usb11_phy); | 
 | 83 | 	clk_disable_unprepare(da8xx_ohci->usb11_clk); | 
 | 84 | } | 
 | 85 |  | 
 | 86 | static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) | 
 | 87 | { | 
 | 88 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 89 | 	struct device *dev		= hcd->self.controller; | 
 | 90 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 91 | 	int ret; | 
 | 92 |  | 
 | 93 | 	if (hub && hub->set_power) | 
 | 94 | 		return hub->set_power(1, on); | 
 | 95 |  | 
 | 96 | 	if (!da8xx_ohci->vbus_reg) | 
 | 97 | 		return 0; | 
 | 98 |  | 
 | 99 | 	if (on && !da8xx_ohci->reg_enabled) { | 
 | 100 | 		ret = regulator_enable(da8xx_ohci->vbus_reg); | 
 | 101 | 		if (ret) { | 
 | 102 | 			dev_err(dev, "Failed to enable regulator: %d\n", ret); | 
 | 103 | 			return ret; | 
 | 104 | 		} | 
 | 105 | 		da8xx_ohci->reg_enabled = 1; | 
 | 106 |  | 
 | 107 | 	} else if (!on && da8xx_ohci->reg_enabled) { | 
 | 108 | 		ret = regulator_disable(da8xx_ohci->vbus_reg); | 
 | 109 | 		if (ret) { | 
 | 110 | 			dev_err(dev, "Failed  to disable regulator: %d\n", ret); | 
 | 111 | 			return ret; | 
 | 112 | 		} | 
 | 113 | 		da8xx_ohci->reg_enabled = 0; | 
 | 114 | 	} | 
 | 115 |  | 
 | 116 | 	return 0; | 
 | 117 | } | 
 | 118 |  | 
 | 119 | static int ohci_da8xx_get_power(struct usb_hcd *hcd) | 
 | 120 | { | 
 | 121 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 122 | 	struct device *dev		= hcd->self.controller; | 
 | 123 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 124 |  | 
 | 125 | 	if (hub && hub->get_power) | 
 | 126 | 		return hub->get_power(1); | 
 | 127 |  | 
 | 128 | 	if (da8xx_ohci->vbus_reg) | 
 | 129 | 		return regulator_is_enabled(da8xx_ohci->vbus_reg); | 
 | 130 |  | 
 | 131 | 	return 1; | 
 | 132 | } | 
 | 133 |  | 
 | 134 | static int ohci_da8xx_get_oci(struct usb_hcd *hcd) | 
 | 135 | { | 
 | 136 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 137 | 	struct device *dev		= hcd->self.controller; | 
 | 138 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 139 | 	unsigned int flags; | 
 | 140 | 	int ret; | 
 | 141 |  | 
 | 142 | 	if (hub && hub->get_oci) | 
 | 143 | 		return hub->get_oci(1); | 
 | 144 |  | 
 | 145 | 	if (!da8xx_ohci->vbus_reg) | 
 | 146 | 		return 0; | 
 | 147 |  | 
 | 148 | 	ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags); | 
 | 149 | 	if (ret) | 
 | 150 | 		return ret; | 
 | 151 |  | 
 | 152 | 	if (flags & REGULATOR_ERROR_OVER_CURRENT) | 
 | 153 | 		return 1; | 
 | 154 |  | 
 | 155 | 	return 0; | 
 | 156 | } | 
 | 157 |  | 
 | 158 | static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) | 
 | 159 | { | 
 | 160 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 161 | 	struct device *dev		= hcd->self.controller; | 
 | 162 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 163 |  | 
 | 164 | 	if (hub && hub->set_power) | 
 | 165 | 		return 1; | 
 | 166 |  | 
 | 167 | 	if (da8xx_ohci->vbus_reg) | 
 | 168 | 		return 1; | 
 | 169 |  | 
 | 170 | 	return 0; | 
 | 171 | } | 
 | 172 |  | 
 | 173 | static int ohci_da8xx_has_oci(struct usb_hcd *hcd) | 
 | 174 | { | 
 | 175 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 176 | 	struct device *dev		= hcd->self.controller; | 
 | 177 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 178 |  | 
 | 179 | 	if (hub && hub->get_oci) | 
 | 180 | 		return 1; | 
 | 181 |  | 
 | 182 | 	if (da8xx_ohci->vbus_reg) | 
 | 183 | 		return 1; | 
 | 184 |  | 
 | 185 | 	return 0; | 
 | 186 | } | 
 | 187 |  | 
 | 188 | static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) | 
 | 189 | { | 
 | 190 | 	struct device *dev		= hcd->self.controller; | 
 | 191 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 192 |  | 
 | 193 | 	if (hub && hub->potpgt) | 
 | 194 | 		return 1; | 
 | 195 |  | 
 | 196 | 	return 0; | 
 | 197 | } | 
 | 198 |  | 
 | 199 | /* | 
 | 200 |  * Handle the port over-current indicator change. | 
 | 201 |  */ | 
 | 202 | static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, | 
 | 203 | 				    unsigned port) | 
 | 204 | { | 
 | 205 | 	ocic_mask |= 1 << port; | 
 | 206 |  | 
 | 207 | 	/* Once over-current is detected, the port needs to be powered down */ | 
 | 208 | 	if (hub->get_oci(port) > 0) | 
 | 209 | 		hub->set_power(port, 0); | 
 | 210 | } | 
 | 211 |  | 
 | 212 | static int ohci_da8xx_regulator_event(struct notifier_block *nb, | 
 | 213 | 				unsigned long event, void *data) | 
 | 214 | { | 
 | 215 | 	struct da8xx_ohci_hcd *da8xx_ohci = | 
 | 216 | 				container_of(nb, struct da8xx_ohci_hcd, nb); | 
 | 217 |  | 
 | 218 | 	if (event & REGULATOR_EVENT_OVER_CURRENT) { | 
 | 219 | 		ocic_mask |= 1 << 1; | 
 | 220 | 		ohci_da8xx_set_power(da8xx_ohci->hcd, 0); | 
 | 221 | 	} | 
 | 222 |  | 
 | 223 | 	return 0; | 
 | 224 | } | 
 | 225 |  | 
 | 226 | static int ohci_da8xx_register_notify(struct usb_hcd *hcd) | 
 | 227 | { | 
 | 228 | 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 229 | 	struct device *dev		= hcd->self.controller; | 
 | 230 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 231 | 	int ret = 0; | 
 | 232 |  | 
 | 233 | 	if (hub && hub->ocic_notify) { | 
 | 234 | 		ret = hub->ocic_notify(ohci_da8xx_ocic_handler); | 
 | 235 | 	} else if (da8xx_ohci->vbus_reg) { | 
 | 236 | 		da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; | 
 | 237 | 		ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, | 
 | 238 | 						&da8xx_ohci->nb); | 
 | 239 | 	} | 
 | 240 |  | 
 | 241 | 	if (ret) | 
 | 242 | 		dev_err(dev, "Failed to register notifier: %d\n", ret); | 
 | 243 |  | 
 | 244 | 	return ret; | 
 | 245 | } | 
 | 246 |  | 
 | 247 | static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd) | 
 | 248 | { | 
 | 249 | 	struct device *dev		= hcd->self.controller; | 
 | 250 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 251 |  | 
 | 252 | 	if (hub && hub->ocic_notify) | 
 | 253 | 		hub->ocic_notify(NULL); | 
 | 254 | } | 
 | 255 |  | 
 | 256 | static int ohci_da8xx_reset(struct usb_hcd *hcd) | 
 | 257 | { | 
 | 258 | 	struct device *dev		= hcd->self.controller; | 
 | 259 | 	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev); | 
 | 260 | 	struct ohci_hcd	*ohci		= hcd_to_ohci(hcd); | 
 | 261 | 	int result; | 
 | 262 | 	u32 rh_a; | 
 | 263 |  | 
 | 264 | 	dev_dbg(dev, "starting USB controller\n"); | 
 | 265 |  | 
 | 266 | 	result = ohci_da8xx_enable(hcd); | 
 | 267 | 	if (result < 0) | 
 | 268 | 		return result; | 
 | 269 |  | 
 | 270 | 	/* | 
 | 271 | 	 * DA8xx only have 1 port connected to the pins but the HC root hub | 
 | 272 | 	 * register A reports 2 ports, thus we'll have to override it... | 
 | 273 | 	 */ | 
 | 274 | 	ohci->num_ports = 1; | 
 | 275 |  | 
 | 276 | 	result = ohci_setup(hcd); | 
 | 277 | 	if (result < 0) { | 
 | 278 | 		ohci_da8xx_disable(hcd); | 
 | 279 | 		return result; | 
 | 280 | 	} | 
 | 281 |  | 
 | 282 | 	/* | 
 | 283 | 	 * Since we're providing a board-specific root hub port power control | 
 | 284 | 	 * and over-current reporting, we have to override the HC root hub A | 
 | 285 | 	 * register's default value, so that ohci_hub_control() could return | 
 | 286 | 	 * the correct hub descriptor... | 
 | 287 | 	 */ | 
 | 288 | 	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); | 
 | 289 | 	if (ohci_da8xx_has_set_power(hcd)) { | 
 | 290 | 		rh_a &= ~RH_A_NPS; | 
 | 291 | 		rh_a |=  RH_A_PSM; | 
 | 292 | 	} | 
 | 293 | 	if (ohci_da8xx_has_oci(hcd)) { | 
 | 294 | 		rh_a &= ~RH_A_NOCP; | 
 | 295 | 		rh_a |=  RH_A_OCPM; | 
 | 296 | 	} | 
 | 297 | 	if (ohci_da8xx_has_potpgt(hcd)) { | 
 | 298 | 		rh_a &= ~RH_A_POTPGT; | 
 | 299 | 		rh_a |= hub->potpgt << 24; | 
 | 300 | 	} | 
 | 301 | 	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); | 
 | 302 |  | 
 | 303 | 	return result; | 
 | 304 | } | 
 | 305 |  | 
 | 306 | /* | 
 | 307 |  * Update the status data from the hub with the over-current indicator change. | 
 | 308 |  */ | 
 | 309 | static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) | 
 | 310 | { | 
 | 311 | 	int length		= orig_ohci_hub_status_data(hcd, buf); | 
 | 312 |  | 
 | 313 | 	/* See if we have OCIC bit set on port 1 */ | 
 | 314 | 	if (ocic_mask & (1 << 1)) { | 
 | 315 | 		dev_dbg(hcd->self.controller, "over-current indicator change " | 
 | 316 | 			"on port 1\n"); | 
 | 317 |  | 
 | 318 | 		if (!length) | 
 | 319 | 			length = 1; | 
 | 320 |  | 
 | 321 | 		buf[0] |= 1 << 1; | 
 | 322 | 	} | 
 | 323 | 	return length; | 
 | 324 | } | 
 | 325 |  | 
 | 326 | /* | 
 | 327 |  * Look at the control requests to the root hub and see if we need to override. | 
 | 328 |  */ | 
 | 329 | static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | 
 | 330 | 				  u16 wIndex, char *buf, u16 wLength) | 
 | 331 | { | 
 | 332 | 	struct device *dev		= hcd->self.controller; | 
 | 333 | 	int temp; | 
 | 334 |  | 
 | 335 | 	switch (typeReq) { | 
 | 336 | 	case GetPortStatus: | 
 | 337 | 		/* Check the port number */ | 
 | 338 | 		if (wIndex != 1) | 
 | 339 | 			break; | 
 | 340 |  | 
 | 341 | 		dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); | 
 | 342 |  | 
 | 343 | 		temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); | 
 | 344 |  | 
 | 345 | 		/* The port power status (PPS) bit defaults to 1 */ | 
 | 346 | 		if (!ohci_da8xx_get_power(hcd)) | 
 | 347 | 			temp &= ~RH_PS_PPS; | 
 | 348 |  | 
 | 349 | 		/* The port over-current indicator (POCI) bit is always 0 */ | 
 | 350 | 		if (ohci_da8xx_get_oci(hcd) > 0) | 
 | 351 | 			temp |=  RH_PS_POCI; | 
 | 352 |  | 
 | 353 | 		/* The over-current indicator change (OCIC) bit is 0 too */ | 
 | 354 | 		if (ocic_mask & (1 << wIndex)) | 
 | 355 | 			temp |=  RH_PS_OCIC; | 
 | 356 |  | 
 | 357 | 		put_unaligned(cpu_to_le32(temp), (__le32 *)buf); | 
 | 358 | 		return 0; | 
 | 359 | 	case SetPortFeature: | 
 | 360 | 		temp = 1; | 
 | 361 | 		goto check_port; | 
 | 362 | 	case ClearPortFeature: | 
 | 363 | 		temp = 0; | 
 | 364 |  | 
 | 365 | check_port: | 
 | 366 | 		/* Check the port number */ | 
 | 367 | 		if (wIndex != 1) | 
 | 368 | 			break; | 
 | 369 |  | 
 | 370 | 		switch (wValue) { | 
 | 371 | 		case USB_PORT_FEAT_POWER: | 
 | 372 | 			dev_dbg(dev, "%sPortFeature(%u): %s\n", | 
 | 373 | 				temp ? "Set" : "Clear", wIndex, "POWER"); | 
 | 374 |  | 
 | 375 | 			return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0; | 
 | 376 | 		case USB_PORT_FEAT_C_OVER_CURRENT: | 
 | 377 | 			dev_dbg(dev, "%sPortFeature(%u): %s\n", | 
 | 378 | 				temp ? "Set" : "Clear", wIndex, | 
 | 379 | 				"C_OVER_CURRENT"); | 
 | 380 |  | 
 | 381 | 			if (temp) | 
 | 382 | 				ocic_mask |= 1 << wIndex; | 
 | 383 | 			else | 
 | 384 | 				ocic_mask &= ~(1 << wIndex); | 
 | 385 | 			return 0; | 
 | 386 | 		} | 
 | 387 | 	} | 
 | 388 |  | 
 | 389 | 	return orig_ohci_hub_control(hcd, typeReq, wValue, | 
 | 390 | 			wIndex, buf, wLength); | 
 | 391 | } | 
 | 392 |  | 
 | 393 | /*-------------------------------------------------------------------------*/ | 
 | 394 | #ifdef CONFIG_OF | 
 | 395 | static const struct of_device_id da8xx_ohci_ids[] = { | 
 | 396 | 	{ .compatible = "ti,da830-ohci" }, | 
 | 397 | 	{ } | 
 | 398 | }; | 
 | 399 | MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); | 
 | 400 | #endif | 
 | 401 |  | 
 | 402 | static int ohci_da8xx_probe(struct platform_device *pdev) | 
 | 403 | { | 
 | 404 | 	struct da8xx_ohci_hcd *da8xx_ohci; | 
 | 405 | 	struct usb_hcd	*hcd; | 
 | 406 | 	struct resource *mem; | 
 | 407 | 	int error, irq; | 
 | 408 | 	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev, | 
 | 409 | 				dev_name(&pdev->dev)); | 
 | 410 | 	if (!hcd) | 
 | 411 | 		return -ENOMEM; | 
 | 412 |  | 
 | 413 | 	da8xx_ohci = to_da8xx_ohci(hcd); | 
 | 414 | 	da8xx_ohci->hcd = hcd; | 
 | 415 |  | 
 | 416 | 	da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, NULL); | 
 | 417 | 	if (IS_ERR(da8xx_ohci->usb11_clk)) { | 
 | 418 | 		error = PTR_ERR(da8xx_ohci->usb11_clk); | 
 | 419 | 		if (error != -EPROBE_DEFER) | 
 | 420 | 			dev_err(&pdev->dev, "Failed to get clock.\n"); | 
 | 421 | 		goto err; | 
 | 422 | 	} | 
 | 423 |  | 
 | 424 | 	da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy"); | 
 | 425 | 	if (IS_ERR(da8xx_ohci->usb11_phy)) { | 
 | 426 | 		error = PTR_ERR(da8xx_ohci->usb11_phy); | 
 | 427 | 		if (error != -EPROBE_DEFER) | 
 | 428 | 			dev_err(&pdev->dev, "Failed to get phy.\n"); | 
 | 429 | 		goto err; | 
 | 430 | 	} | 
 | 431 |  | 
 | 432 | 	da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus"); | 
 | 433 | 	if (IS_ERR(da8xx_ohci->vbus_reg)) { | 
 | 434 | 		error = PTR_ERR(da8xx_ohci->vbus_reg); | 
 | 435 | 		if (error == -ENODEV) { | 
 | 436 | 			da8xx_ohci->vbus_reg = NULL; | 
 | 437 | 		} else if (error == -EPROBE_DEFER) { | 
 | 438 | 			goto err; | 
 | 439 | 		} else { | 
 | 440 | 			dev_err(&pdev->dev, "Failed to get regulator\n"); | 
 | 441 | 			goto err; | 
 | 442 | 		} | 
 | 443 | 	} | 
 | 444 |  | 
 | 445 | 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 446 | 	hcd->regs = devm_ioremap_resource(&pdev->dev, mem); | 
 | 447 | 	if (IS_ERR(hcd->regs)) { | 
 | 448 | 		error = PTR_ERR(hcd->regs); | 
 | 449 | 		goto err; | 
 | 450 | 	} | 
 | 451 | 	hcd->rsrc_start = mem->start; | 
 | 452 | 	hcd->rsrc_len = resource_size(mem); | 
 | 453 |  | 
 | 454 | 	irq = platform_get_irq(pdev, 0); | 
 | 455 | 	if (irq < 0) { | 
 | 456 | 		error = -ENODEV; | 
 | 457 | 		goto err; | 
 | 458 | 	} | 
 | 459 |  | 
 | 460 | 	error = usb_add_hcd(hcd, irq, 0); | 
 | 461 | 	if (error) | 
 | 462 | 		goto err; | 
 | 463 |  | 
 | 464 | 	device_wakeup_enable(hcd->self.controller); | 
 | 465 |  | 
 | 466 | 	error = ohci_da8xx_register_notify(hcd); | 
 | 467 | 	if (error) | 
 | 468 | 		goto err_remove_hcd; | 
 | 469 |  | 
 | 470 | 	return 0; | 
 | 471 |  | 
 | 472 | err_remove_hcd: | 
 | 473 | 	usb_remove_hcd(hcd); | 
 | 474 | err: | 
 | 475 | 	usb_put_hcd(hcd); | 
 | 476 | 	return error; | 
 | 477 | } | 
 | 478 |  | 
 | 479 | static int ohci_da8xx_remove(struct platform_device *pdev) | 
 | 480 | { | 
 | 481 | 	struct usb_hcd	*hcd = platform_get_drvdata(pdev); | 
 | 482 |  | 
 | 483 | 	ohci_da8xx_unregister_notify(hcd); | 
 | 484 | 	usb_remove_hcd(hcd); | 
 | 485 | 	usb_put_hcd(hcd); | 
 | 486 |  | 
 | 487 | 	return 0; | 
 | 488 | } | 
 | 489 |  | 
 | 490 | #ifdef CONFIG_PM | 
 | 491 | static int ohci_da8xx_suspend(struct platform_device *pdev, | 
 | 492 | 				pm_message_t message) | 
 | 493 | { | 
 | 494 | 	struct usb_hcd	*hcd	= platform_get_drvdata(pdev); | 
 | 495 | 	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd); | 
 | 496 | 	bool		do_wakeup	= device_may_wakeup(&pdev->dev); | 
 | 497 | 	int		ret; | 
 | 498 |  | 
 | 499 |  | 
 | 500 | 	if (time_before(jiffies, ohci->next_statechange)) | 
 | 501 | 		msleep(5); | 
 | 502 | 	ohci->next_statechange = jiffies; | 
 | 503 |  | 
 | 504 | 	ret = ohci_suspend(hcd, do_wakeup); | 
 | 505 | 	if (ret) | 
 | 506 | 		return ret; | 
 | 507 |  | 
 | 508 | 	ohci_da8xx_disable(hcd); | 
 | 509 | 	hcd->state = HC_STATE_SUSPENDED; | 
 | 510 |  | 
 | 511 | 	return ret; | 
 | 512 | } | 
 | 513 |  | 
 | 514 | static int ohci_da8xx_resume(struct platform_device *dev) | 
 | 515 | { | 
 | 516 | 	struct usb_hcd	*hcd	= platform_get_drvdata(dev); | 
 | 517 | 	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd); | 
 | 518 | 	int ret; | 
 | 519 |  | 
 | 520 | 	if (time_before(jiffies, ohci->next_statechange)) | 
 | 521 | 		msleep(5); | 
 | 522 | 	ohci->next_statechange = jiffies; | 
 | 523 |  | 
 | 524 | 	ret = ohci_da8xx_enable(hcd); | 
 | 525 | 	if (ret) | 
 | 526 | 		return ret; | 
 | 527 |  | 
 | 528 | 	ohci_resume(hcd, false); | 
 | 529 |  | 
 | 530 | 	return 0; | 
 | 531 | } | 
 | 532 | #endif | 
 | 533 |  | 
 | 534 | static const struct ohci_driver_overrides da8xx_overrides __initconst = { | 
 | 535 | 	.reset		 = ohci_da8xx_reset, | 
 | 536 | 	.extra_priv_size = sizeof(struct da8xx_ohci_hcd), | 
 | 537 | }; | 
 | 538 |  | 
 | 539 | /* | 
 | 540 |  * Driver definition to register with platform structure. | 
 | 541 |  */ | 
 | 542 | static struct platform_driver ohci_hcd_da8xx_driver = { | 
 | 543 | 	.probe		= ohci_da8xx_probe, | 
 | 544 | 	.remove		= ohci_da8xx_remove, | 
 | 545 | 	.shutdown 	= usb_hcd_platform_shutdown, | 
 | 546 | #ifdef	CONFIG_PM | 
 | 547 | 	.suspend	= ohci_da8xx_suspend, | 
 | 548 | 	.resume		= ohci_da8xx_resume, | 
 | 549 | #endif | 
 | 550 | 	.driver		= { | 
 | 551 | 		.name	= DRV_NAME, | 
 | 552 | 		.of_match_table = of_match_ptr(da8xx_ohci_ids), | 
 | 553 | 	}, | 
 | 554 | }; | 
 | 555 |  | 
 | 556 | static int __init ohci_da8xx_init(void) | 
 | 557 | { | 
 | 558 |  | 
 | 559 | 	if (usb_disabled()) | 
 | 560 | 		return -ENODEV; | 
 | 561 |  | 
 | 562 | 	pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); | 
 | 563 | 	ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); | 
 | 564 |  | 
 | 565 | 	/* | 
 | 566 | 	 * The Davinci da8xx HW has some unusual quirks, which require | 
 | 567 | 	 * da8xx-specific workarounds. We override certain hc_driver | 
 | 568 | 	 * functions here to achieve that. We explicitly do not enhance | 
 | 569 | 	 * ohci_driver_overrides to allow this more easily, since this | 
 | 570 | 	 * is an unusual case, and we don't want to encourage others to | 
 | 571 | 	 * override these functions by making it too easy. | 
 | 572 | 	 */ | 
 | 573 |  | 
 | 574 | 	orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control; | 
 | 575 | 	orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data; | 
 | 576 |  | 
 | 577 | 	ohci_da8xx_hc_driver.hub_status_data     = ohci_da8xx_hub_status_data; | 
 | 578 | 	ohci_da8xx_hc_driver.hub_control         = ohci_da8xx_hub_control; | 
 | 579 |  | 
 | 580 | 	return platform_driver_register(&ohci_hcd_da8xx_driver); | 
 | 581 | } | 
 | 582 | module_init(ohci_da8xx_init); | 
 | 583 |  | 
 | 584 | static void __exit ohci_da8xx_exit(void) | 
 | 585 | { | 
 | 586 | 	platform_driver_unregister(&ohci_hcd_da8xx_driver); | 
 | 587 | } | 
 | 588 | module_exit(ohci_da8xx_exit); | 
 | 589 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | 590 | MODULE_LICENSE("GPL"); | 
 | 591 | MODULE_ALIAS("platform:" DRV_NAME); |