blob: 1bd3c10ce189394ead8d74faa0b543471b79fce3 [file] [log] [blame]
xjb04a4022021-11-25 15:01:52 +08001/*
2 * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
3 *
4 * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
5 *
6 * This driver is inspired by:
7 * pinctrl-nomadik.c, please see original file for copyright information
8 * pinctrl-tegra.c, please see original file for copyright information
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 */
20
21#include <linux/bitmap.h>
22#include <linux/bug.h>
23#include <linux/delay.h>
24#include <linux/device.h>
25#include <linux/err.h>
26#include <linux/gpio/driver.h>
27#include <linux/io.h>
28#include <linux/irq.h>
29#include <linux/irqdesc.h>
30#include <linux/init.h>
31#include <linux/of_address.h>
32#include <linux/of.h>
33#include <linux/of_irq.h>
34#include <linux/pinctrl/consumer.h>
35#include <linux/pinctrl/machine.h>
36#include <linux/pinctrl/pinconf.h>
37#include <linux/pinctrl/pinctrl.h>
38#include <linux/pinctrl/pinmux.h>
39#include <linux/pinctrl/pinconf-generic.h>
40#include <linux/platform_device.h>
41#include <linux/seq_file.h>
42#include <linux/slab.h>
43#include <linux/spinlock.h>
44#include <linux/types.h>
45#include <dt-bindings/pinctrl/bcm2835.h>
46
47#define MODULE_NAME "pinctrl-bcm2835"
48#define BCM2835_NUM_GPIOS 54
49#define BCM2835_NUM_BANKS 2
50#define BCM2835_NUM_IRQS 3
51
52#define BCM2835_PIN_BITMAP_SZ \
53 DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
54
55/* GPIO register offsets */
56#define GPFSEL0 0x0 /* Function Select */
57#define GPSET0 0x1c /* Pin Output Set */
58#define GPCLR0 0x28 /* Pin Output Clear */
59#define GPLEV0 0x34 /* Pin Level */
60#define GPEDS0 0x40 /* Pin Event Detect Status */
61#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */
62#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */
63#define GPHEN0 0x64 /* Pin High Detect Enable */
64#define GPLEN0 0x70 /* Pin Low Detect Enable */
65#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */
66#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
67#define GPPUD 0x94 /* Pin Pull-up/down Enable */
68#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
69
70#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
71#define FSEL_SHIFT(p) (((p) % 10) * 3)
72#define GPIO_REG_OFFSET(p) ((p) / 32)
73#define GPIO_REG_SHIFT(p) ((p) % 32)
74
75/* argument: bcm2835_pinconf_pull */
76#define BCM2835_PINCONF_PARAM_PULL (PIN_CONFIG_END + 1)
77
78struct bcm2835_pinctrl {
79 struct device *dev;
80 void __iomem *base;
81 int irq[BCM2835_NUM_IRQS];
82
83 /* note: locking assumes each bank will have its own unsigned long */
84 unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
85 unsigned int irq_type[BCM2835_NUM_GPIOS];
86
87 struct pinctrl_dev *pctl_dev;
88 struct gpio_chip gpio_chip;
89 struct pinctrl_gpio_range gpio_range;
90
91 raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
92};
93
94/* pins are just named GPIO0..GPIO53 */
95#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
96static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
97 BCM2835_GPIO_PIN(0),
98 BCM2835_GPIO_PIN(1),
99 BCM2835_GPIO_PIN(2),
100 BCM2835_GPIO_PIN(3),
101 BCM2835_GPIO_PIN(4),
102 BCM2835_GPIO_PIN(5),
103 BCM2835_GPIO_PIN(6),
104 BCM2835_GPIO_PIN(7),
105 BCM2835_GPIO_PIN(8),
106 BCM2835_GPIO_PIN(9),
107 BCM2835_GPIO_PIN(10),
108 BCM2835_GPIO_PIN(11),
109 BCM2835_GPIO_PIN(12),
110 BCM2835_GPIO_PIN(13),
111 BCM2835_GPIO_PIN(14),
112 BCM2835_GPIO_PIN(15),
113 BCM2835_GPIO_PIN(16),
114 BCM2835_GPIO_PIN(17),
115 BCM2835_GPIO_PIN(18),
116 BCM2835_GPIO_PIN(19),
117 BCM2835_GPIO_PIN(20),
118 BCM2835_GPIO_PIN(21),
119 BCM2835_GPIO_PIN(22),
120 BCM2835_GPIO_PIN(23),
121 BCM2835_GPIO_PIN(24),
122 BCM2835_GPIO_PIN(25),
123 BCM2835_GPIO_PIN(26),
124 BCM2835_GPIO_PIN(27),
125 BCM2835_GPIO_PIN(28),
126 BCM2835_GPIO_PIN(29),
127 BCM2835_GPIO_PIN(30),
128 BCM2835_GPIO_PIN(31),
129 BCM2835_GPIO_PIN(32),
130 BCM2835_GPIO_PIN(33),
131 BCM2835_GPIO_PIN(34),
132 BCM2835_GPIO_PIN(35),
133 BCM2835_GPIO_PIN(36),
134 BCM2835_GPIO_PIN(37),
135 BCM2835_GPIO_PIN(38),
136 BCM2835_GPIO_PIN(39),
137 BCM2835_GPIO_PIN(40),
138 BCM2835_GPIO_PIN(41),
139 BCM2835_GPIO_PIN(42),
140 BCM2835_GPIO_PIN(43),
141 BCM2835_GPIO_PIN(44),
142 BCM2835_GPIO_PIN(45),
143 BCM2835_GPIO_PIN(46),
144 BCM2835_GPIO_PIN(47),
145 BCM2835_GPIO_PIN(48),
146 BCM2835_GPIO_PIN(49),
147 BCM2835_GPIO_PIN(50),
148 BCM2835_GPIO_PIN(51),
149 BCM2835_GPIO_PIN(52),
150 BCM2835_GPIO_PIN(53),
151};
152
153/* one pin per group */
154static const char * const bcm2835_gpio_groups[] = {
155 "gpio0",
156 "gpio1",
157 "gpio2",
158 "gpio3",
159 "gpio4",
160 "gpio5",
161 "gpio6",
162 "gpio7",
163 "gpio8",
164 "gpio9",
165 "gpio10",
166 "gpio11",
167 "gpio12",
168 "gpio13",
169 "gpio14",
170 "gpio15",
171 "gpio16",
172 "gpio17",
173 "gpio18",
174 "gpio19",
175 "gpio20",
176 "gpio21",
177 "gpio22",
178 "gpio23",
179 "gpio24",
180 "gpio25",
181 "gpio26",
182 "gpio27",
183 "gpio28",
184 "gpio29",
185 "gpio30",
186 "gpio31",
187 "gpio32",
188 "gpio33",
189 "gpio34",
190 "gpio35",
191 "gpio36",
192 "gpio37",
193 "gpio38",
194 "gpio39",
195 "gpio40",
196 "gpio41",
197 "gpio42",
198 "gpio43",
199 "gpio44",
200 "gpio45",
201 "gpio46",
202 "gpio47",
203 "gpio48",
204 "gpio49",
205 "gpio50",
206 "gpio51",
207 "gpio52",
208 "gpio53",
209};
210
211enum bcm2835_fsel {
212 BCM2835_FSEL_COUNT = 8,
213 BCM2835_FSEL_MASK = 0x7,
214};
215
216static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
217 [BCM2835_FSEL_GPIO_IN] = "gpio_in",
218 [BCM2835_FSEL_GPIO_OUT] = "gpio_out",
219 [BCM2835_FSEL_ALT0] = "alt0",
220 [BCM2835_FSEL_ALT1] = "alt1",
221 [BCM2835_FSEL_ALT2] = "alt2",
222 [BCM2835_FSEL_ALT3] = "alt3",
223 [BCM2835_FSEL_ALT4] = "alt4",
224 [BCM2835_FSEL_ALT5] = "alt5",
225};
226
227static const char * const irq_type_names[] = {
228 [IRQ_TYPE_NONE] = "none",
229 [IRQ_TYPE_EDGE_RISING] = "edge-rising",
230 [IRQ_TYPE_EDGE_FALLING] = "edge-falling",
231 [IRQ_TYPE_EDGE_BOTH] = "edge-both",
232 [IRQ_TYPE_LEVEL_HIGH] = "level-high",
233 [IRQ_TYPE_LEVEL_LOW] = "level-low",
234};
235
236static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
237{
238 return readl(pc->base + reg);
239}
240
241static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
242 u32 val)
243{
244 writel(val, pc->base + reg);
245}
246
247static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
248 unsigned bit)
249{
250 reg += GPIO_REG_OFFSET(bit) * 4;
251 return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
252}
253
254/* note NOT a read/modify/write cycle */
255static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
256 unsigned reg, unsigned bit)
257{
258 reg += GPIO_REG_OFFSET(bit) * 4;
259 bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
260}
261
262static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
263 struct bcm2835_pinctrl *pc, unsigned pin)
264{
265 u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
266 enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
267
268 dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
269 bcm2835_functions[status]);
270
271 return status;
272}
273
274static inline void bcm2835_pinctrl_fsel_set(
275 struct bcm2835_pinctrl *pc, unsigned pin,
276 enum bcm2835_fsel fsel)
277{
278 u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
279 enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
280
281 dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
282 bcm2835_functions[cur]);
283
284 if (cur == fsel)
285 return;
286
287 if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
288 /* always transition through GPIO_IN */
289 val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
290 val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
291
292 dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
293 bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
294 bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
295 }
296
297 val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
298 val |= fsel << FSEL_SHIFT(pin);
299
300 dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
301 bcm2835_functions[fsel]);
302 bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
303}
304
305static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
306{
307 return pinctrl_gpio_direction_input(chip->base + offset);
308}
309
310static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
311{
312 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
313
314 return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
315}
316
317static int bcm2835_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
318{
319 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
320 enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
321
322 /* Alternative function doesn't clearly provide a direction */
323 if (fsel > BCM2835_FSEL_GPIO_OUT)
324 return -EINVAL;
325
326 return (fsel == BCM2835_FSEL_GPIO_IN);
327}
328
329static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
330{
331 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
332
333 bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
334}
335
336static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
337 unsigned offset, int value)
338{
339 bcm2835_gpio_set(chip, offset, value);
340 return pinctrl_gpio_direction_output(chip->base + offset);
341}
342
343static const struct gpio_chip bcm2835_gpio_chip = {
344 .label = MODULE_NAME,
345 .owner = THIS_MODULE,
346 .request = gpiochip_generic_request,
347 .free = gpiochip_generic_free,
348 .direction_input = bcm2835_gpio_direction_input,
349 .direction_output = bcm2835_gpio_direction_output,
350 .get_direction = bcm2835_gpio_get_direction,
351 .get = bcm2835_gpio_get,
352 .set = bcm2835_gpio_set,
353 .base = -1,
354 .ngpio = BCM2835_NUM_GPIOS,
355 .can_sleep = false,
356};
357
358static void bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
359 unsigned int bank, u32 mask)
360{
361 unsigned long events;
362 unsigned offset;
363 unsigned gpio;
364
365 events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
366 events &= mask;
367 events &= pc->enabled_irq_map[bank];
368 for_each_set_bit(offset, &events, 32) {
369 gpio = (32 * bank) + offset;
370 generic_handle_irq(irq_linear_revmap(pc->gpio_chip.irq.domain,
371 gpio));
372 }
373}
374
375static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
376{
377 struct gpio_chip *chip = irq_desc_get_handler_data(desc);
378 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
379 struct irq_chip *host_chip = irq_desc_get_chip(desc);
380 int irq = irq_desc_get_irq(desc);
381 int group;
382 int i;
383
384 for (i = 0; i < ARRAY_SIZE(pc->irq); i++) {
385 if (pc->irq[i] == irq) {
386 group = i;
387 break;
388 }
389 }
390 /* This should not happen, every IRQ has a bank */
391 if (i == ARRAY_SIZE(pc->irq))
392 BUG();
393
394 chained_irq_enter(host_chip, desc);
395
396 switch (group) {
397 case 0: /* IRQ0 covers GPIOs 0-27 */
398 bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff);
399 break;
400 case 1: /* IRQ1 covers GPIOs 28-45 */
401 bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000);
402 bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
403 break;
404 case 2: /* IRQ2 covers GPIOs 46-53 */
405 bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
406 break;
407 }
408
409 chained_irq_exit(host_chip, desc);
410}
411
412static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
413 unsigned reg, unsigned offset, bool enable)
414{
415 u32 value;
416 reg += GPIO_REG_OFFSET(offset) * 4;
417 value = bcm2835_gpio_rd(pc, reg);
418 if (enable)
419 value |= BIT(GPIO_REG_SHIFT(offset));
420 else
421 value &= ~(BIT(GPIO_REG_SHIFT(offset)));
422 bcm2835_gpio_wr(pc, reg, value);
423}
424
425/* fast path for IRQ handler */
426static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
427 unsigned offset, bool enable)
428{
429 switch (pc->irq_type[offset]) {
430 case IRQ_TYPE_EDGE_RISING:
431 __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
432 break;
433
434 case IRQ_TYPE_EDGE_FALLING:
435 __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
436 break;
437
438 case IRQ_TYPE_EDGE_BOTH:
439 __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
440 __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
441 break;
442
443 case IRQ_TYPE_LEVEL_HIGH:
444 __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
445 break;
446
447 case IRQ_TYPE_LEVEL_LOW:
448 __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
449 break;
450 }
451}
452
453static void bcm2835_gpio_irq_enable(struct irq_data *data)
454{
455 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
456 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
457 unsigned gpio = irqd_to_hwirq(data);
458 unsigned offset = GPIO_REG_SHIFT(gpio);
459 unsigned bank = GPIO_REG_OFFSET(gpio);
460 unsigned long flags;
461
462 raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
463 set_bit(offset, &pc->enabled_irq_map[bank]);
464 bcm2835_gpio_irq_config(pc, gpio, true);
465 raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
466}
467
468static void bcm2835_gpio_irq_disable(struct irq_data *data)
469{
470 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
471 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
472 unsigned gpio = irqd_to_hwirq(data);
473 unsigned offset = GPIO_REG_SHIFT(gpio);
474 unsigned bank = GPIO_REG_OFFSET(gpio);
475 unsigned long flags;
476
477 raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
478 bcm2835_gpio_irq_config(pc, gpio, false);
479 /* Clear events that were latched prior to clearing event sources */
480 bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
481 clear_bit(offset, &pc->enabled_irq_map[bank]);
482 raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
483}
484
485static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
486 unsigned offset, unsigned int type)
487{
488 switch (type) {
489 case IRQ_TYPE_NONE:
490 case IRQ_TYPE_EDGE_RISING:
491 case IRQ_TYPE_EDGE_FALLING:
492 case IRQ_TYPE_EDGE_BOTH:
493 case IRQ_TYPE_LEVEL_HIGH:
494 case IRQ_TYPE_LEVEL_LOW:
495 pc->irq_type[offset] = type;
496 break;
497
498 default:
499 return -EINVAL;
500 }
501 return 0;
502}
503
504/* slower path for reconfiguring IRQ type */
505static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
506 unsigned offset, unsigned int type)
507{
508 switch (type) {
509 case IRQ_TYPE_NONE:
510 if (pc->irq_type[offset] != type) {
511 bcm2835_gpio_irq_config(pc, offset, false);
512 pc->irq_type[offset] = type;
513 }
514 break;
515
516 case IRQ_TYPE_EDGE_RISING:
517 if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
518 /* RISING already enabled, disable FALLING */
519 pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
520 bcm2835_gpio_irq_config(pc, offset, false);
521 pc->irq_type[offset] = type;
522 } else if (pc->irq_type[offset] != type) {
523 bcm2835_gpio_irq_config(pc, offset, false);
524 pc->irq_type[offset] = type;
525 bcm2835_gpio_irq_config(pc, offset, true);
526 }
527 break;
528
529 case IRQ_TYPE_EDGE_FALLING:
530 if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
531 /* FALLING already enabled, disable RISING */
532 pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
533 bcm2835_gpio_irq_config(pc, offset, false);
534 pc->irq_type[offset] = type;
535 } else if (pc->irq_type[offset] != type) {
536 bcm2835_gpio_irq_config(pc, offset, false);
537 pc->irq_type[offset] = type;
538 bcm2835_gpio_irq_config(pc, offset, true);
539 }
540 break;
541
542 case IRQ_TYPE_EDGE_BOTH:
543 if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
544 /* RISING already enabled, enable FALLING too */
545 pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
546 bcm2835_gpio_irq_config(pc, offset, true);
547 pc->irq_type[offset] = type;
548 } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
549 /* FALLING already enabled, enable RISING too */
550 pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
551 bcm2835_gpio_irq_config(pc, offset, true);
552 pc->irq_type[offset] = type;
553 } else if (pc->irq_type[offset] != type) {
554 bcm2835_gpio_irq_config(pc, offset, false);
555 pc->irq_type[offset] = type;
556 bcm2835_gpio_irq_config(pc, offset, true);
557 }
558 break;
559
560 case IRQ_TYPE_LEVEL_HIGH:
561 case IRQ_TYPE_LEVEL_LOW:
562 if (pc->irq_type[offset] != type) {
563 bcm2835_gpio_irq_config(pc, offset, false);
564 pc->irq_type[offset] = type;
565 bcm2835_gpio_irq_config(pc, offset, true);
566 }
567 break;
568
569 default:
570 return -EINVAL;
571 }
572 return 0;
573}
574
575static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
576{
577 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
578 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
579 unsigned gpio = irqd_to_hwirq(data);
580 unsigned offset = GPIO_REG_SHIFT(gpio);
581 unsigned bank = GPIO_REG_OFFSET(gpio);
582 unsigned long flags;
583 int ret;
584
585 raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
586
587 if (test_bit(offset, &pc->enabled_irq_map[bank]))
588 ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
589 else
590 ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
591
592 if (type & IRQ_TYPE_EDGE_BOTH)
593 irq_set_handler_locked(data, handle_edge_irq);
594 else
595 irq_set_handler_locked(data, handle_level_irq);
596
597 raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
598
599 return ret;
600}
601
602static void bcm2835_gpio_irq_ack(struct irq_data *data)
603{
604 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
605 struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
606 unsigned gpio = irqd_to_hwirq(data);
607
608 bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
609}
610
611static struct irq_chip bcm2835_gpio_irq_chip = {
612 .name = MODULE_NAME,
613 .irq_enable = bcm2835_gpio_irq_enable,
614 .irq_disable = bcm2835_gpio_irq_disable,
615 .irq_set_type = bcm2835_gpio_irq_set_type,
616 .irq_ack = bcm2835_gpio_irq_ack,
617 .irq_mask = bcm2835_gpio_irq_disable,
618 .irq_unmask = bcm2835_gpio_irq_enable,
619};
620
621static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
622{
623 return ARRAY_SIZE(bcm2835_gpio_groups);
624}
625
626static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
627 unsigned selector)
628{
629 return bcm2835_gpio_groups[selector];
630}
631
632static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
633 unsigned selector,
634 const unsigned **pins,
635 unsigned *num_pins)
636{
637 *pins = &bcm2835_gpio_pins[selector].number;
638 *num_pins = 1;
639
640 return 0;
641}
642
643static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
644 struct seq_file *s,
645 unsigned offset)
646{
647 struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
648 struct gpio_chip *chip = &pc->gpio_chip;
649 enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
650 const char *fname = bcm2835_functions[fsel];
651 int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
652 int irq = irq_find_mapping(chip->irq.domain, offset);
653
654 seq_printf(s, "function %s in %s; irq %d (%s)",
655 fname, value ? "hi" : "lo",
656 irq, irq_type_names[pc->irq_type[offset]]);
657}
658
659static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
660 struct pinctrl_map *maps, unsigned num_maps)
661{
662 int i;
663
664 for (i = 0; i < num_maps; i++)
665 if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
666 kfree(maps[i].data.configs.configs);
667
668 kfree(maps);
669}
670
671static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
672 struct device_node *np, u32 pin, u32 fnum,
673 struct pinctrl_map **maps)
674{
675 struct pinctrl_map *map = *maps;
676
677 if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
678 dev_err(pc->dev, "%pOF: invalid brcm,function %d\n", np, fnum);
679 return -EINVAL;
680 }
681
682 map->type = PIN_MAP_TYPE_MUX_GROUP;
683 map->data.mux.group = bcm2835_gpio_groups[pin];
684 map->data.mux.function = bcm2835_functions[fnum];
685 (*maps)++;
686
687 return 0;
688}
689
690static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
691 struct device_node *np, u32 pin, u32 pull,
692 struct pinctrl_map **maps)
693{
694 struct pinctrl_map *map = *maps;
695 unsigned long *configs;
696
697 if (pull > 2) {
698 dev_err(pc->dev, "%pOF: invalid brcm,pull %d\n", np, pull);
699 return -EINVAL;
700 }
701
702 configs = kzalloc(sizeof(*configs), GFP_KERNEL);
703 if (!configs)
704 return -ENOMEM;
705 configs[0] = pinconf_to_config_packed(BCM2835_PINCONF_PARAM_PULL, pull);
706
707 map->type = PIN_MAP_TYPE_CONFIGS_PIN;
708 map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
709 map->data.configs.configs = configs;
710 map->data.configs.num_configs = 1;
711 (*maps)++;
712
713 return 0;
714}
715
716static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
717 struct device_node *np,
718 struct pinctrl_map **map, unsigned int *num_maps)
719{
720 struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
721 struct property *pins, *funcs, *pulls;
722 int num_pins, num_funcs, num_pulls, maps_per_pin;
723 struct pinctrl_map *maps, *cur_map;
724 int i, err;
725 u32 pin, func, pull;
726
727 /* Check for generic binding in this node */
728 err = pinconf_generic_dt_node_to_map_all(pctldev, np, map, num_maps);
729 if (err || *num_maps)
730 return err;
731
732 /* Generic binding did not find anything continue with legacy parse */
733 pins = of_find_property(np, "brcm,pins", NULL);
734 if (!pins) {
735 dev_err(pc->dev, "%pOF: missing brcm,pins property\n", np);
736 return -EINVAL;
737 }
738
739 funcs = of_find_property(np, "brcm,function", NULL);
740 pulls = of_find_property(np, "brcm,pull", NULL);
741
742 if (!funcs && !pulls) {
743 dev_err(pc->dev,
744 "%pOF: neither brcm,function nor brcm,pull specified\n",
745 np);
746 return -EINVAL;
747 }
748
749 num_pins = pins->length / 4;
750 num_funcs = funcs ? (funcs->length / 4) : 0;
751 num_pulls = pulls ? (pulls->length / 4) : 0;
752
753 if (num_funcs > 1 && num_funcs != num_pins) {
754 dev_err(pc->dev,
755 "%pOF: brcm,function must have 1 or %d entries\n",
756 np, num_pins);
757 return -EINVAL;
758 }
759
760 if (num_pulls > 1 && num_pulls != num_pins) {
761 dev_err(pc->dev,
762 "%pOF: brcm,pull must have 1 or %d entries\n",
763 np, num_pins);
764 return -EINVAL;
765 }
766
767 maps_per_pin = 0;
768 if (num_funcs)
769 maps_per_pin++;
770 if (num_pulls)
771 maps_per_pin++;
772 cur_map = maps = kcalloc(num_pins * maps_per_pin, sizeof(*maps),
773 GFP_KERNEL);
774 if (!maps)
775 return -ENOMEM;
776
777 for (i = 0; i < num_pins; i++) {
778 err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
779 if (err)
780 goto out;
781 if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
782 dev_err(pc->dev, "%pOF: invalid brcm,pins value %d\n",
783 np, pin);
784 err = -EINVAL;
785 goto out;
786 }
787
788 if (num_funcs) {
789 err = of_property_read_u32_index(np, "brcm,function",
790 (num_funcs > 1) ? i : 0, &func);
791 if (err)
792 goto out;
793 err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
794 func, &cur_map);
795 if (err)
796 goto out;
797 }
798 if (num_pulls) {
799 err = of_property_read_u32_index(np, "brcm,pull",
800 (num_pulls > 1) ? i : 0, &pull);
801 if (err)
802 goto out;
803 err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
804 pull, &cur_map);
805 if (err)
806 goto out;
807 }
808 }
809
810 *map = maps;
811 *num_maps = num_pins * maps_per_pin;
812
813 return 0;
814
815out:
816 bcm2835_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin);
817 return err;
818}
819
820static const struct pinctrl_ops bcm2835_pctl_ops = {
821 .get_groups_count = bcm2835_pctl_get_groups_count,
822 .get_group_name = bcm2835_pctl_get_group_name,
823 .get_group_pins = bcm2835_pctl_get_group_pins,
824 .pin_dbg_show = bcm2835_pctl_pin_dbg_show,
825 .dt_node_to_map = bcm2835_pctl_dt_node_to_map,
826 .dt_free_map = bcm2835_pctl_dt_free_map,
827};
828
829static int bcm2835_pmx_free(struct pinctrl_dev *pctldev,
830 unsigned offset)
831{
832 struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
833
834 /* disable by setting to GPIO_IN */
835 bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
836 return 0;
837}
838
839static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
840{
841 return BCM2835_FSEL_COUNT;
842}
843
844static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
845 unsigned selector)
846{
847 return bcm2835_functions[selector];
848}
849
850static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
851 unsigned selector,
852 const char * const **groups,
853 unsigned * const num_groups)
854{
855 /* every pin can do every function */
856 *groups = bcm2835_gpio_groups;
857 *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
858
859 return 0;
860}
861
862static int bcm2835_pmx_set(struct pinctrl_dev *pctldev,
863 unsigned func_selector,
864 unsigned group_selector)
865{
866 struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
867
868 bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
869
870 return 0;
871}
872
873static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
874 struct pinctrl_gpio_range *range,
875 unsigned offset)
876{
877 struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
878
879 /* disable by setting to GPIO_IN */
880 bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
881}
882
883static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
884 struct pinctrl_gpio_range *range,
885 unsigned offset,
886 bool input)
887{
888 struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
889 enum bcm2835_fsel fsel = input ?
890 BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
891
892 bcm2835_pinctrl_fsel_set(pc, offset, fsel);
893
894 return 0;
895}
896
897static const struct pinmux_ops bcm2835_pmx_ops = {
898 .free = bcm2835_pmx_free,
899 .get_functions_count = bcm2835_pmx_get_functions_count,
900 .get_function_name = bcm2835_pmx_get_function_name,
901 .get_function_groups = bcm2835_pmx_get_function_groups,
902 .set_mux = bcm2835_pmx_set,
903 .gpio_disable_free = bcm2835_pmx_gpio_disable_free,
904 .gpio_set_direction = bcm2835_pmx_gpio_set_direction,
905};
906
907static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
908 unsigned pin, unsigned long *config)
909{
910 /* No way to read back config in HW */
911 return -ENOTSUPP;
912}
913
914static void bcm2835_pull_config_set(struct bcm2835_pinctrl *pc,
915 unsigned int pin, unsigned int arg)
916{
917 u32 off, bit;
918
919 off = GPIO_REG_OFFSET(pin);
920 bit = GPIO_REG_SHIFT(pin);
921
922 bcm2835_gpio_wr(pc, GPPUD, arg & 3);
923 /*
924 * BCM2835 datasheet say to wait 150 cycles, but not of what.
925 * But the VideoCore firmware delay for this operation
926 * based nearly on the same amount of VPU cycles and this clock
927 * runs at 250 MHz.
928 */
929 udelay(1);
930 bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
931 udelay(1);
932 bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
933}
934
935static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
936 unsigned int pin, unsigned long *configs,
937 unsigned int num_configs)
938{
939 struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
940 u32 param, arg;
941 int i;
942
943 for (i = 0; i < num_configs; i++) {
944 param = pinconf_to_config_param(configs[i]);
945 arg = pinconf_to_config_argument(configs[i]);
946
947 switch (param) {
948 /* Set legacy brcm,pull */
949 case BCM2835_PINCONF_PARAM_PULL:
950 bcm2835_pull_config_set(pc, pin, arg);
951 break;
952
953 /* Set pull generic bindings */
954 case PIN_CONFIG_BIAS_DISABLE:
955 bcm2835_pull_config_set(pc, pin, BCM2835_PUD_OFF);
956 break;
957
958 case PIN_CONFIG_BIAS_PULL_DOWN:
959 bcm2835_pull_config_set(pc, pin, BCM2835_PUD_DOWN);
960 break;
961
962 case PIN_CONFIG_BIAS_PULL_UP:
963 bcm2835_pull_config_set(pc, pin, BCM2835_PUD_UP);
964 break;
965
966 /* Set output-high or output-low */
967 case PIN_CONFIG_OUTPUT:
968 bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin);
969 break;
970
971 default:
972 return -EINVAL;
973
974 } /* switch param type */
975 } /* for each config */
976
977 return 0;
978}
979
980static const struct pinconf_ops bcm2835_pinconf_ops = {
981 .pin_config_get = bcm2835_pinconf_get,
982 .pin_config_set = bcm2835_pinconf_set,
983};
984
985static struct pinctrl_desc bcm2835_pinctrl_desc = {
986 .name = MODULE_NAME,
987 .pins = bcm2835_gpio_pins,
988 .npins = ARRAY_SIZE(bcm2835_gpio_pins),
989 .pctlops = &bcm2835_pctl_ops,
990 .pmxops = &bcm2835_pmx_ops,
991 .confops = &bcm2835_pinconf_ops,
992 .owner = THIS_MODULE,
993};
994
995static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
996 .name = MODULE_NAME,
997 .npins = BCM2835_NUM_GPIOS,
998};
999
1000static int bcm2835_pinctrl_probe(struct platform_device *pdev)
1001{
1002 struct device *dev = &pdev->dev;
1003 struct device_node *np = dev->of_node;
1004 struct bcm2835_pinctrl *pc;
1005 struct resource iomem;
1006 int err, i;
1007 BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
1008 BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
1009
1010 pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
1011 if (!pc)
1012 return -ENOMEM;
1013
1014 platform_set_drvdata(pdev, pc);
1015 pc->dev = dev;
1016
1017 err = of_address_to_resource(np, 0, &iomem);
1018 if (err) {
1019 dev_err(dev, "could not get IO memory\n");
1020 return err;
1021 }
1022
1023 pc->base = devm_ioremap_resource(dev, &iomem);
1024 if (IS_ERR(pc->base))
1025 return PTR_ERR(pc->base);
1026
1027 pc->gpio_chip = bcm2835_gpio_chip;
1028 pc->gpio_chip.parent = dev;
1029 pc->gpio_chip.of_node = np;
1030
1031 for (i = 0; i < BCM2835_NUM_BANKS; i++) {
1032 unsigned long events;
1033 unsigned offset;
1034
1035 /* clear event detection flags */
1036 bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
1037 bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
1038 bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
1039 bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
1040 bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
1041 bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
1042
1043 /* clear all the events */
1044 events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
1045 for_each_set_bit(offset, &events, 32)
1046 bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
1047
1048 raw_spin_lock_init(&pc->irq_lock[i]);
1049 }
1050
1051 err = gpiochip_add_data(&pc->gpio_chip, pc);
1052 if (err) {
1053 dev_err(dev, "could not add GPIO chip\n");
1054 return err;
1055 }
1056
1057 err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip,
1058 0, handle_level_irq, IRQ_TYPE_NONE);
1059 if (err) {
1060 dev_info(dev, "could not add irqchip\n");
1061 return err;
1062 }
1063
1064 for (i = 0; i < BCM2835_NUM_IRQS; i++) {
1065 pc->irq[i] = irq_of_parse_and_map(np, i);
1066
1067 if (pc->irq[i] == 0)
1068 continue;
1069
1070 /*
1071 * Use the same handler for all groups: this is necessary
1072 * since we use one gpiochip to cover all lines - the
1073 * irq handler then needs to figure out which group and
1074 * bank that was firing the IRQ and look up the per-group
1075 * and bank data.
1076 */
1077 gpiochip_set_chained_irqchip(&pc->gpio_chip,
1078 &bcm2835_gpio_irq_chip,
1079 pc->irq[i],
1080 bcm2835_gpio_irq_handler);
1081 }
1082
1083 pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
1084 if (IS_ERR(pc->pctl_dev)) {
1085 gpiochip_remove(&pc->gpio_chip);
1086 return PTR_ERR(pc->pctl_dev);
1087 }
1088
1089 pc->gpio_range = bcm2835_pinctrl_gpio_range;
1090 pc->gpio_range.base = pc->gpio_chip.base;
1091 pc->gpio_range.gc = &pc->gpio_chip;
1092 pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
1093
1094 return 0;
1095}
1096
1097static const struct of_device_id bcm2835_pinctrl_match[] = {
1098 { .compatible = "brcm,bcm2835-gpio" },
1099 {}
1100};
1101
1102static struct platform_driver bcm2835_pinctrl_driver = {
1103 .probe = bcm2835_pinctrl_probe,
1104 .driver = {
1105 .name = MODULE_NAME,
1106 .of_match_table = bcm2835_pinctrl_match,
1107 .suppress_bind_attrs = true,
1108 },
1109};
1110builtin_platform_driver(bcm2835_pinctrl_driver);