| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |  *  linux/drivers/input/serio/sa1111ps2.c | 
 | 3 |  * | 
 | 4 |  *  Copyright (C) 2002 Russell King | 
 | 5 |  * | 
 | 6 |  * This program is free software; you can redistribute it and/or modify | 
 | 7 |  * it under the terms of the GNU General Public License as published by | 
 | 8 |  * the Free Software Foundation; either version 2 of the License. | 
 | 9 |  */ | 
 | 10 | #include <linux/module.h> | 
 | 11 | #include <linux/init.h> | 
 | 12 | #include <linux/input.h> | 
 | 13 | #include <linux/serio.h> | 
 | 14 | #include <linux/errno.h> | 
 | 15 | #include <linux/interrupt.h> | 
 | 16 | #include <linux/ioport.h> | 
 | 17 | #include <linux/delay.h> | 
 | 18 | #include <linux/device.h> | 
 | 19 | #include <linux/slab.h> | 
 | 20 | #include <linux/spinlock.h> | 
 | 21 |  | 
 | 22 | #include <asm/io.h> | 
 | 23 |  | 
 | 24 | #include <asm/hardware/sa1111.h> | 
 | 25 |  | 
 | 26 | #define PS2CR		0x0000 | 
 | 27 | #define PS2STAT		0x0004 | 
 | 28 | #define PS2DATA		0x0008 | 
 | 29 | #define PS2CLKDIV	0x000c | 
 | 30 | #define PS2PRECNT	0x0010 | 
 | 31 |  | 
 | 32 | #define PS2CR_ENA	0x08 | 
 | 33 | #define PS2CR_FKD	0x02 | 
 | 34 | #define PS2CR_FKC	0x01 | 
 | 35 |  | 
 | 36 | #define PS2STAT_STP	0x0100 | 
 | 37 | #define PS2STAT_TXE	0x0080 | 
 | 38 | #define PS2STAT_TXB	0x0040 | 
 | 39 | #define PS2STAT_RXF	0x0020 | 
 | 40 | #define PS2STAT_RXB	0x0010 | 
 | 41 | #define PS2STAT_ENA	0x0008 | 
 | 42 | #define PS2STAT_RXP	0x0004 | 
 | 43 | #define PS2STAT_KBD	0x0002 | 
 | 44 | #define PS2STAT_KBC	0x0001 | 
 | 45 |  | 
 | 46 | struct ps2if { | 
 | 47 | 	struct serio		*io; | 
 | 48 | 	struct sa1111_dev	*dev; | 
 | 49 | 	void __iomem		*base; | 
 | 50 | 	int			rx_irq; | 
 | 51 | 	int			tx_irq; | 
 | 52 | 	unsigned int		open; | 
 | 53 | 	spinlock_t		lock; | 
 | 54 | 	unsigned int		head; | 
 | 55 | 	unsigned int		tail; | 
 | 56 | 	unsigned char		buf[4]; | 
 | 57 | }; | 
 | 58 |  | 
 | 59 | /* | 
 | 60 |  * Read all bytes waiting in the PS2 port.  There should be | 
 | 61 |  * at the most one, but we loop for safety.  If there was a | 
 | 62 |  * framing error, we have to manually clear the status. | 
 | 63 |  */ | 
 | 64 | static irqreturn_t ps2_rxint(int irq, void *dev_id) | 
 | 65 | { | 
 | 66 | 	struct ps2if *ps2if = dev_id; | 
 | 67 | 	unsigned int scancode, flag, status; | 
 | 68 |  | 
 | 69 | 	status = readl_relaxed(ps2if->base + PS2STAT); | 
 | 70 | 	while (status & PS2STAT_RXF) { | 
 | 71 | 		if (status & PS2STAT_STP) | 
 | 72 | 			writel_relaxed(PS2STAT_STP, ps2if->base + PS2STAT); | 
 | 73 |  | 
 | 74 | 		flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) | | 
 | 75 | 		       (status & PS2STAT_RXP ? 0 : SERIO_PARITY); | 
 | 76 |  | 
 | 77 | 		scancode = readl_relaxed(ps2if->base + PS2DATA) & 0xff; | 
 | 78 |  | 
 | 79 | 		if (hweight8(scancode) & 1) | 
 | 80 | 			flag ^= SERIO_PARITY; | 
 | 81 |  | 
 | 82 | 		serio_interrupt(ps2if->io, scancode, flag); | 
 | 83 |  | 
 | 84 | 		status = readl_relaxed(ps2if->base + PS2STAT); | 
 | 85 |         } | 
 | 86 |  | 
 | 87 |         return IRQ_HANDLED; | 
 | 88 | } | 
 | 89 |  | 
 | 90 | /* | 
 | 91 |  * Completion of ps2 write | 
 | 92 |  */ | 
 | 93 | static irqreturn_t ps2_txint(int irq, void *dev_id) | 
 | 94 | { | 
 | 95 | 	struct ps2if *ps2if = dev_id; | 
 | 96 | 	unsigned int status; | 
 | 97 |  | 
 | 98 | 	spin_lock(&ps2if->lock); | 
 | 99 | 	status = readl_relaxed(ps2if->base + PS2STAT); | 
 | 100 | 	if (ps2if->head == ps2if->tail) { | 
 | 101 | 		disable_irq_nosync(irq); | 
 | 102 | 		/* done */ | 
 | 103 | 	} else if (status & PS2STAT_TXE) { | 
 | 104 | 		writel_relaxed(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA); | 
 | 105 | 		ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1); | 
 | 106 | 	} | 
 | 107 | 	spin_unlock(&ps2if->lock); | 
 | 108 |  | 
 | 109 | 	return IRQ_HANDLED; | 
 | 110 | } | 
 | 111 |  | 
 | 112 | /* | 
 | 113 |  * Write a byte to the PS2 port.  We have to wait for the | 
 | 114 |  * port to indicate that the transmitter is empty. | 
 | 115 |  */ | 
 | 116 | static int ps2_write(struct serio *io, unsigned char val) | 
 | 117 | { | 
 | 118 | 	struct ps2if *ps2if = io->port_data; | 
 | 119 | 	unsigned long flags; | 
 | 120 | 	unsigned int head; | 
 | 121 |  | 
 | 122 | 	spin_lock_irqsave(&ps2if->lock, flags); | 
 | 123 |  | 
 | 124 | 	/* | 
 | 125 | 	 * If the TX register is empty, we can go straight out. | 
 | 126 | 	 */ | 
 | 127 | 	if (readl_relaxed(ps2if->base + PS2STAT) & PS2STAT_TXE) { | 
 | 128 | 		writel_relaxed(val, ps2if->base + PS2DATA); | 
 | 129 | 	} else { | 
 | 130 | 		if (ps2if->head == ps2if->tail) | 
 | 131 | 			enable_irq(ps2if->tx_irq); | 
 | 132 | 		head = (ps2if->head + 1) & (sizeof(ps2if->buf) - 1); | 
 | 133 | 		if (head != ps2if->tail) { | 
 | 134 | 			ps2if->buf[ps2if->head] = val; | 
 | 135 | 			ps2if->head = head; | 
 | 136 | 		} | 
 | 137 | 	} | 
 | 138 |  | 
 | 139 | 	spin_unlock_irqrestore(&ps2if->lock, flags); | 
 | 140 | 	return 0; | 
 | 141 | } | 
 | 142 |  | 
 | 143 | static int ps2_open(struct serio *io) | 
 | 144 | { | 
 | 145 | 	struct ps2if *ps2if = io->port_data; | 
 | 146 | 	int ret; | 
 | 147 |  | 
 | 148 | 	ret = sa1111_enable_device(ps2if->dev); | 
 | 149 | 	if (ret) | 
 | 150 | 		return ret; | 
 | 151 |  | 
 | 152 | 	ret = request_irq(ps2if->rx_irq, ps2_rxint, 0, | 
 | 153 | 			  SA1111_DRIVER_NAME(ps2if->dev), ps2if); | 
 | 154 | 	if (ret) { | 
 | 155 | 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", | 
 | 156 | 			ps2if->rx_irq, ret); | 
 | 157 | 		sa1111_disable_device(ps2if->dev); | 
 | 158 | 		return ret; | 
 | 159 | 	} | 
 | 160 |  | 
 | 161 | 	ret = request_irq(ps2if->tx_irq, ps2_txint, 0, | 
 | 162 | 			  SA1111_DRIVER_NAME(ps2if->dev), ps2if); | 
 | 163 | 	if (ret) { | 
 | 164 | 		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", | 
 | 165 | 			ps2if->tx_irq, ret); | 
 | 166 | 		free_irq(ps2if->rx_irq, ps2if); | 
 | 167 | 		sa1111_disable_device(ps2if->dev); | 
 | 168 | 		return ret; | 
 | 169 | 	} | 
 | 170 |  | 
 | 171 | 	ps2if->open = 1; | 
 | 172 |  | 
 | 173 | 	enable_irq_wake(ps2if->rx_irq); | 
 | 174 |  | 
 | 175 | 	writel_relaxed(PS2CR_ENA, ps2if->base + PS2CR); | 
 | 176 | 	return 0; | 
 | 177 | } | 
 | 178 |  | 
 | 179 | static void ps2_close(struct serio *io) | 
 | 180 | { | 
 | 181 | 	struct ps2if *ps2if = io->port_data; | 
 | 182 |  | 
 | 183 | 	writel_relaxed(0, ps2if->base + PS2CR); | 
 | 184 |  | 
 | 185 | 	disable_irq_wake(ps2if->rx_irq); | 
 | 186 |  | 
 | 187 | 	ps2if->open = 0; | 
 | 188 |  | 
 | 189 | 	free_irq(ps2if->tx_irq, ps2if); | 
 | 190 | 	free_irq(ps2if->rx_irq, ps2if); | 
 | 191 |  | 
 | 192 | 	sa1111_disable_device(ps2if->dev); | 
 | 193 | } | 
 | 194 |  | 
 | 195 | /* | 
 | 196 |  * Clear the input buffer. | 
 | 197 |  */ | 
 | 198 | static void ps2_clear_input(struct ps2if *ps2if) | 
 | 199 | { | 
 | 200 | 	int maxread = 100; | 
 | 201 |  | 
 | 202 | 	while (maxread--) { | 
 | 203 | 		if ((readl_relaxed(ps2if->base + PS2DATA) & 0xff) == 0xff) | 
 | 204 | 			break; | 
 | 205 | 	} | 
 | 206 | } | 
 | 207 |  | 
 | 208 | static unsigned int ps2_test_one(struct ps2if *ps2if, | 
 | 209 | 					   unsigned int mask) | 
 | 210 | { | 
 | 211 | 	unsigned int val; | 
 | 212 |  | 
 | 213 | 	writel_relaxed(PS2CR_ENA | mask, ps2if->base + PS2CR); | 
 | 214 |  | 
 | 215 | 	udelay(10); | 
 | 216 |  | 
 | 217 | 	val = readl_relaxed(ps2if->base + PS2STAT); | 
 | 218 | 	return val & (PS2STAT_KBC | PS2STAT_KBD); | 
 | 219 | } | 
 | 220 |  | 
 | 221 | /* | 
 | 222 |  * Test the keyboard interface.  We basically check to make sure that | 
 | 223 |  * we can drive each line to the keyboard independently of each other. | 
 | 224 |  */ | 
 | 225 | static int ps2_test(struct ps2if *ps2if) | 
 | 226 | { | 
 | 227 | 	unsigned int stat; | 
 | 228 | 	int ret = 0; | 
 | 229 |  | 
 | 230 | 	stat = ps2_test_one(ps2if, PS2CR_FKC); | 
 | 231 | 	if (stat != PS2STAT_KBD) { | 
 | 232 | 		printk("PS/2 interface test failed[1]: %02x\n", stat); | 
 | 233 | 		ret = -ENODEV; | 
 | 234 | 	} | 
 | 235 |  | 
 | 236 | 	stat = ps2_test_one(ps2if, 0); | 
 | 237 | 	if (stat != (PS2STAT_KBC | PS2STAT_KBD)) { | 
 | 238 | 		printk("PS/2 interface test failed[2]: %02x\n", stat); | 
 | 239 | 		ret = -ENODEV; | 
 | 240 | 	} | 
 | 241 |  | 
 | 242 | 	stat = ps2_test_one(ps2if, PS2CR_FKD); | 
 | 243 | 	if (stat != PS2STAT_KBC) { | 
 | 244 | 		printk("PS/2 interface test failed[3]: %02x\n", stat); | 
 | 245 | 		ret = -ENODEV; | 
 | 246 | 	} | 
 | 247 |  | 
 | 248 | 	writel_relaxed(0, ps2if->base + PS2CR); | 
 | 249 |  | 
 | 250 | 	return ret; | 
 | 251 | } | 
 | 252 |  | 
 | 253 | /* | 
 | 254 |  * Add one device to this driver. | 
 | 255 |  */ | 
 | 256 | static int ps2_probe(struct sa1111_dev *dev) | 
 | 257 | { | 
 | 258 | 	struct ps2if *ps2if; | 
 | 259 | 	struct serio *serio; | 
 | 260 | 	int ret; | 
 | 261 |  | 
 | 262 | 	ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL); | 
 | 263 | 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL); | 
 | 264 | 	if (!ps2if || !serio) { | 
 | 265 | 		ret = -ENOMEM; | 
 | 266 | 		goto free; | 
 | 267 | 	} | 
 | 268 |  | 
 | 269 | 	serio->id.type		= SERIO_8042; | 
 | 270 | 	serio->write		= ps2_write; | 
 | 271 | 	serio->open		= ps2_open; | 
 | 272 | 	serio->close		= ps2_close; | 
 | 273 | 	strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name)); | 
 | 274 | 	strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys)); | 
 | 275 | 	serio->port_data	= ps2if; | 
 | 276 | 	serio->dev.parent	= &dev->dev; | 
 | 277 | 	ps2if->io		= serio; | 
 | 278 | 	ps2if->dev		= dev; | 
 | 279 | 	sa1111_set_drvdata(dev, ps2if); | 
 | 280 |  | 
 | 281 | 	spin_lock_init(&ps2if->lock); | 
 | 282 |  | 
 | 283 | 	ps2if->rx_irq = sa1111_get_irq(dev, 0); | 
 | 284 | 	if (ps2if->rx_irq <= 0) { | 
 | 285 | 		ret = ps2if->rx_irq ? : -ENXIO; | 
 | 286 | 		goto free; | 
 | 287 | 	} | 
 | 288 |  | 
 | 289 | 	ps2if->tx_irq = sa1111_get_irq(dev, 1); | 
 | 290 | 	if (ps2if->tx_irq <= 0) { | 
 | 291 | 		ret = ps2if->tx_irq ? : -ENXIO; | 
 | 292 | 		goto free; | 
 | 293 | 	} | 
 | 294 |  | 
 | 295 | 	/* | 
 | 296 | 	 * Request the physical region for this PS2 port. | 
 | 297 | 	 */ | 
 | 298 | 	if (!request_mem_region(dev->res.start, | 
 | 299 | 				dev->res.end - dev->res.start + 1, | 
 | 300 | 				SA1111_DRIVER_NAME(dev))) { | 
 | 301 | 		ret = -EBUSY; | 
 | 302 | 		goto free; | 
 | 303 | 	} | 
 | 304 |  | 
 | 305 | 	/* | 
 | 306 | 	 * Our parent device has already mapped the region. | 
 | 307 | 	 */ | 
 | 308 | 	ps2if->base = dev->mapbase; | 
 | 309 |  | 
 | 310 | 	sa1111_enable_device(ps2if->dev); | 
 | 311 |  | 
 | 312 | 	/* Incoming clock is 8MHz */ | 
 | 313 | 	writel_relaxed(0, ps2if->base + PS2CLKDIV); | 
 | 314 | 	writel_relaxed(127, ps2if->base + PS2PRECNT); | 
 | 315 |  | 
 | 316 | 	/* | 
 | 317 | 	 * Flush any pending input. | 
 | 318 | 	 */ | 
 | 319 | 	ps2_clear_input(ps2if); | 
 | 320 |  | 
 | 321 | 	/* | 
 | 322 | 	 * Test the keyboard interface. | 
 | 323 | 	 */ | 
 | 324 | 	ret = ps2_test(ps2if); | 
 | 325 | 	if (ret) | 
 | 326 | 		goto out; | 
 | 327 |  | 
 | 328 | 	/* | 
 | 329 | 	 * Flush any pending input. | 
 | 330 | 	 */ | 
 | 331 | 	ps2_clear_input(ps2if); | 
 | 332 |  | 
 | 333 | 	sa1111_disable_device(ps2if->dev); | 
 | 334 | 	serio_register_port(ps2if->io); | 
 | 335 | 	return 0; | 
 | 336 |  | 
 | 337 |  out: | 
 | 338 | 	sa1111_disable_device(ps2if->dev); | 
 | 339 | 	release_mem_region(dev->res.start, resource_size(&dev->res)); | 
 | 340 |  free: | 
 | 341 | 	sa1111_set_drvdata(dev, NULL); | 
 | 342 | 	kfree(ps2if); | 
 | 343 | 	kfree(serio); | 
 | 344 | 	return ret; | 
 | 345 | } | 
 | 346 |  | 
 | 347 | /* | 
 | 348 |  * Remove one device from this driver. | 
 | 349 |  */ | 
 | 350 | static int ps2_remove(struct sa1111_dev *dev) | 
 | 351 | { | 
 | 352 | 	struct ps2if *ps2if = sa1111_get_drvdata(dev); | 
 | 353 |  | 
 | 354 | 	serio_unregister_port(ps2if->io); | 
 | 355 | 	release_mem_region(dev->res.start, resource_size(&dev->res)); | 
 | 356 | 	sa1111_set_drvdata(dev, NULL); | 
 | 357 |  | 
 | 358 | 	kfree(ps2if); | 
 | 359 |  | 
 | 360 | 	return 0; | 
 | 361 | } | 
 | 362 |  | 
 | 363 | /* | 
 | 364 |  * Our device driver structure | 
 | 365 |  */ | 
 | 366 | static struct sa1111_driver ps2_driver = { | 
 | 367 | 	.drv = { | 
 | 368 | 		.name	= "sa1111-ps2", | 
 | 369 | 		.owner	= THIS_MODULE, | 
 | 370 | 	}, | 
 | 371 | 	.devid		= SA1111_DEVID_PS2, | 
 | 372 | 	.probe		= ps2_probe, | 
 | 373 | 	.remove		= ps2_remove, | 
 | 374 | }; | 
 | 375 |  | 
 | 376 | static int __init ps2_init(void) | 
 | 377 | { | 
 | 378 | 	return sa1111_driver_register(&ps2_driver); | 
 | 379 | } | 
 | 380 |  | 
 | 381 | static void __exit ps2_exit(void) | 
 | 382 | { | 
 | 383 | 	sa1111_driver_unregister(&ps2_driver); | 
 | 384 | } | 
 | 385 |  | 
 | 386 | module_init(ps2_init); | 
 | 387 | module_exit(ps2_exit); | 
 | 388 |  | 
 | 389 | MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); | 
 | 390 | MODULE_DESCRIPTION("SA1111 PS2 controller driver"); | 
 | 391 | MODULE_LICENSE("GPL"); |