| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | #include <linux/io.h> | 
 | 2 | #include <linux/delay.h> | 
 | 3 | #include <linux/module.h> | 
 | 4 | #include <linux/thermal.h> | 
 | 5 | #include <linux/platform_device.h> | 
 | 6 |  | 
 | 7 | /* | 
 | 8 |  * According to a data sheet draft, "this temperature sensor uses a bandgap | 
 | 9 |  * type of circuit to compare a voltage which has a negative temperature | 
 | 10 |  * coefficient with a voltage that is proportional to absolute temperature. | 
 | 11 |  * A resistor bank allows 41 different temperature thresholds to be selected | 
 | 12 |  * and the logic output will then indicate whether the actual die temperature | 
 | 13 |  * lies above or below the selected threshold." | 
 | 14 |  */ | 
 | 15 |  | 
 | 16 | #define TEMPSI_CMD	0 | 
 | 17 | #define TEMPSI_RES	4 | 
 | 18 | #define TEMPSI_CFG	8 | 
 | 19 |  | 
 | 20 | #define CMD_OFF		0 | 
 | 21 | #define CMD_ON		1 | 
 | 22 | #define CMD_READ	2 | 
 | 23 |  | 
 | 24 | #define IDX_MIN		15 | 
 | 25 | #define IDX_MAX		40 | 
 | 26 |  | 
 | 27 | struct tango_thermal_priv { | 
 | 28 | 	void __iomem *base; | 
 | 29 | 	int thresh_idx; | 
 | 30 | }; | 
 | 31 |  | 
 | 32 | static bool temp_above_thresh(void __iomem *base, int thresh_idx) | 
 | 33 | { | 
 | 34 | 	writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); | 
 | 35 | 	usleep_range(10, 20); | 
 | 36 | 	writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); | 
 | 37 |  | 
 | 38 | 	return readl(base + TEMPSI_RES); | 
 | 39 | } | 
 | 40 |  | 
 | 41 | static int tango_get_temp(void *arg, int *res) | 
 | 42 | { | 
 | 43 | 	struct tango_thermal_priv *priv = arg; | 
 | 44 | 	int idx = priv->thresh_idx; | 
 | 45 |  | 
 | 46 | 	if (temp_above_thresh(priv->base, idx)) { | 
 | 47 | 		/* Search upward by incrementing thresh_idx */ | 
 | 48 | 		while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx)) | 
 | 49 | 			cpu_relax(); | 
 | 50 | 		idx = idx - 1; /* always return lower bound */ | 
 | 51 | 	} else { | 
 | 52 | 		/* Search downward by decrementing thresh_idx */ | 
 | 53 | 		while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx)) | 
 | 54 | 			cpu_relax(); | 
 | 55 | 	} | 
 | 56 |  | 
 | 57 | 	*res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */ | 
 | 58 | 	priv->thresh_idx = idx; | 
 | 59 |  | 
 | 60 | 	return 0; | 
 | 61 | } | 
 | 62 |  | 
 | 63 | static const struct thermal_zone_of_device_ops ops = { | 
 | 64 | 	.get_temp	= tango_get_temp, | 
 | 65 | }; | 
 | 66 |  | 
 | 67 | static void tango_thermal_init(struct tango_thermal_priv *priv) | 
 | 68 | { | 
 | 69 | 	writel(0, priv->base + TEMPSI_CFG); | 
 | 70 | 	writel(CMD_ON, priv->base + TEMPSI_CMD); | 
 | 71 | } | 
 | 72 |  | 
 | 73 | static int tango_thermal_probe(struct platform_device *pdev) | 
 | 74 | { | 
 | 75 | 	struct resource *res; | 
 | 76 | 	struct tango_thermal_priv *priv; | 
 | 77 | 	struct thermal_zone_device *tzdev; | 
 | 78 |  | 
 | 79 | 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | 
 | 80 | 	if (!priv) | 
 | 81 | 		return -ENOMEM; | 
 | 82 |  | 
 | 83 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 84 | 	priv->base = devm_ioremap_resource(&pdev->dev, res); | 
 | 85 | 	if (IS_ERR(priv->base)) | 
 | 86 | 		return PTR_ERR(priv->base); | 
 | 87 |  | 
 | 88 | 	platform_set_drvdata(pdev, priv); | 
 | 89 | 	priv->thresh_idx = IDX_MIN; | 
 | 90 | 	tango_thermal_init(priv); | 
 | 91 |  | 
 | 92 | 	tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops); | 
 | 93 | 	return PTR_ERR_OR_ZERO(tzdev); | 
 | 94 | } | 
 | 95 |  | 
 | 96 | static int __maybe_unused tango_thermal_resume(struct device *dev) | 
 | 97 | { | 
 | 98 | 	tango_thermal_init(dev_get_drvdata(dev)); | 
 | 99 | 	return 0; | 
 | 100 | } | 
 | 101 |  | 
 | 102 | static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume); | 
 | 103 |  | 
 | 104 | static const struct of_device_id tango_sensor_ids[] = { | 
 | 105 | 	{ | 
 | 106 | 		.compatible = "sigma,smp8758-thermal", | 
 | 107 | 	}, | 
 | 108 | 	{ /* sentinel */ } | 
 | 109 | }; | 
 | 110 | MODULE_DEVICE_TABLE(of, tango_sensor_ids); | 
 | 111 |  | 
 | 112 | static struct platform_driver tango_thermal_driver = { | 
 | 113 | 	.probe	= tango_thermal_probe, | 
 | 114 | 	.driver	= { | 
 | 115 | 		.name		= "tango-thermal", | 
 | 116 | 		.of_match_table	= tango_sensor_ids, | 
 | 117 | 		.pm		= &tango_thermal_pm, | 
 | 118 | 	}, | 
 | 119 | }; | 
 | 120 |  | 
 | 121 | module_platform_driver(tango_thermal_driver); | 
 | 122 |  | 
 | 123 | MODULE_LICENSE("GPL"); | 
 | 124 | MODULE_AUTHOR("Sigma Designs"); | 
 | 125 | MODULE_DESCRIPTION("Tango temperature sensor"); |