| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* linux/drivers/char/pc8736x_gpio.c | 
 | 2 |  | 
 | 3 |    National Semiconductor PC8736x GPIO driver.  Allows a user space | 
 | 4 |    process to play with the GPIO pins. | 
 | 5 |  | 
 | 6 |    Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com> | 
 | 7 |  | 
 | 8 |    adapted from linux/drivers/char/scx200_gpio.c | 
 | 9 |    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>, | 
 | 10 | */ | 
 | 11 |  | 
 | 12 | #include <linux/fs.h> | 
 | 13 | #include <linux/module.h> | 
 | 14 | #include <linux/errno.h> | 
 | 15 | #include <linux/kernel.h> | 
 | 16 | #include <linux/init.h> | 
 | 17 | #include <linux/cdev.h> | 
 | 18 | #include <linux/io.h> | 
 | 19 | #include <linux/ioport.h> | 
 | 20 | #include <linux/mutex.h> | 
 | 21 | #include <linux/nsc_gpio.h> | 
 | 22 | #include <linux/platform_device.h> | 
 | 23 | #include <linux/uaccess.h> | 
 | 24 |  | 
 | 25 | #define DEVNAME "pc8736x_gpio" | 
 | 26 |  | 
 | 27 | MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>"); | 
 | 28 | MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver"); | 
 | 29 | MODULE_LICENSE("GPL"); | 
 | 30 |  | 
 | 31 | static int major;		/* default to dynamic major */ | 
 | 32 | module_param(major, int, 0); | 
 | 33 | MODULE_PARM_DESC(major, "Major device number"); | 
 | 34 |  | 
 | 35 | static DEFINE_MUTEX(pc8736x_gpio_config_lock); | 
 | 36 | static unsigned pc8736x_gpio_base; | 
 | 37 | static u8 pc8736x_gpio_shadow[4]; | 
 | 38 |  | 
 | 39 | #define SIO_BASE1       0x2E	/* 1st command-reg to check */ | 
 | 40 | #define SIO_BASE2       0x4E	/* alt command-reg to check */ | 
 | 41 |  | 
 | 42 | #define SIO_SID		0x20	/* SuperI/O ID Register */ | 
 | 43 | #define SIO_SID_PC87365	0xe5	/* Expected value in ID Register for PC87365 */ | 
 | 44 | #define SIO_SID_PC87366	0xe9	/* Expected value in ID Register for PC87366 */ | 
 | 45 |  | 
 | 46 | #define SIO_CF1		0x21	/* chip config, bit0 is chip enable */ | 
 | 47 |  | 
 | 48 | #define PC8736X_GPIO_RANGE	16 /* ioaddr range */ | 
 | 49 | #define PC8736X_GPIO_CT		32 /* minors matching 4 8 bit ports */ | 
 | 50 |  | 
 | 51 | #define SIO_UNIT_SEL	0x7	/* unit select reg */ | 
 | 52 | #define SIO_UNIT_ACT	0x30	/* unit enable */ | 
 | 53 | #define SIO_GPIO_UNIT	0x7	/* unit number of GPIO */ | 
 | 54 | #define SIO_VLM_UNIT	0x0D | 
 | 55 | #define SIO_TMS_UNIT	0x0E | 
 | 56 |  | 
 | 57 | /* config-space addrs to read/write each unit's runtime addr */ | 
 | 58 | #define SIO_BASE_HADDR		0x60 | 
 | 59 | #define SIO_BASE_LADDR		0x61 | 
 | 60 |  | 
 | 61 | /* GPIO config-space pin-control addresses */ | 
 | 62 | #define SIO_GPIO_PIN_SELECT	0xF0 | 
 | 63 | #define SIO_GPIO_PIN_CONFIG     0xF1 | 
 | 64 | #define SIO_GPIO_PIN_EVENT      0xF2 | 
 | 65 |  | 
 | 66 | static unsigned char superio_cmd = 0; | 
 | 67 | static unsigned char selected_device = 0xFF;	/* bogus start val */ | 
 | 68 |  | 
 | 69 | /* GPIO port runtime access, functionality */ | 
 | 70 | static int port_offset[] = { 0, 4, 8, 10 };	/* non-uniform offsets ! */ | 
 | 71 | /* static int event_capable[] = { 1, 1, 0, 0 };   ports 2,3 are hobbled */ | 
 | 72 |  | 
 | 73 | #define PORT_OUT	0 | 
 | 74 | #define PORT_IN		1 | 
 | 75 | #define PORT_EVT_EN	2 | 
 | 76 | #define PORT_EVT_STST	3 | 
 | 77 |  | 
 | 78 | static struct platform_device *pdev;  /* use in dev_*() */ | 
 | 79 |  | 
 | 80 | static inline void superio_outb(int addr, int val) | 
 | 81 | { | 
 | 82 | 	outb_p(addr, superio_cmd); | 
 | 83 | 	outb_p(val, superio_cmd + 1); | 
 | 84 | } | 
 | 85 |  | 
 | 86 | static inline int superio_inb(int addr) | 
 | 87 | { | 
 | 88 | 	outb_p(addr, superio_cmd); | 
 | 89 | 	return inb_p(superio_cmd + 1); | 
 | 90 | } | 
 | 91 |  | 
 | 92 | static int pc8736x_superio_present(void) | 
 | 93 | { | 
 | 94 | 	int id; | 
 | 95 |  | 
 | 96 | 	/* try the 2 possible values, read a hardware reg to verify */ | 
 | 97 | 	superio_cmd = SIO_BASE1; | 
 | 98 | 	id = superio_inb(SIO_SID); | 
 | 99 | 	if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366) | 
 | 100 | 		return superio_cmd; | 
 | 101 |  | 
 | 102 | 	superio_cmd = SIO_BASE2; | 
 | 103 | 	id = superio_inb(SIO_SID); | 
 | 104 | 	if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366) | 
 | 105 | 		return superio_cmd; | 
 | 106 |  | 
 | 107 | 	return 0; | 
 | 108 | } | 
 | 109 |  | 
 | 110 | static void device_select(unsigned devldn) | 
 | 111 | { | 
 | 112 | 	superio_outb(SIO_UNIT_SEL, devldn); | 
 | 113 | 	selected_device = devldn; | 
 | 114 | } | 
 | 115 |  | 
 | 116 | static void select_pin(unsigned iminor) | 
 | 117 | { | 
 | 118 | 	/* select GPIO port/pin from device minor number */ | 
 | 119 | 	device_select(SIO_GPIO_UNIT); | 
 | 120 | 	superio_outb(SIO_GPIO_PIN_SELECT, | 
 | 121 | 		     ((iminor << 1) & 0xF0) | (iminor & 0x7)); | 
 | 122 | } | 
 | 123 |  | 
 | 124 | static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits, | 
 | 125 | 					    u32 func_slct) | 
 | 126 | { | 
 | 127 | 	u32 config, new_config; | 
 | 128 |  | 
 | 129 | 	mutex_lock(&pc8736x_gpio_config_lock); | 
 | 130 |  | 
 | 131 | 	device_select(SIO_GPIO_UNIT); | 
 | 132 | 	select_pin(index); | 
 | 133 |  | 
 | 134 | 	/* read current config value */ | 
 | 135 | 	config = superio_inb(func_slct); | 
 | 136 |  | 
 | 137 | 	/* set new config */ | 
 | 138 | 	new_config = (config & mask) | bits; | 
 | 139 | 	superio_outb(func_slct, new_config); | 
 | 140 |  | 
 | 141 | 	mutex_unlock(&pc8736x_gpio_config_lock); | 
 | 142 |  | 
 | 143 | 	return config; | 
 | 144 | } | 
 | 145 |  | 
 | 146 | static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits) | 
 | 147 | { | 
 | 148 | 	return pc8736x_gpio_configure_fn(index, mask, bits, | 
 | 149 | 					 SIO_GPIO_PIN_CONFIG); | 
 | 150 | } | 
 | 151 |  | 
 | 152 | static int pc8736x_gpio_get(unsigned minor) | 
 | 153 | { | 
 | 154 | 	int port, bit, val; | 
 | 155 |  | 
 | 156 | 	port = minor >> 3; | 
 | 157 | 	bit = minor & 7; | 
 | 158 | 	val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN); | 
 | 159 | 	val >>= bit; | 
 | 160 | 	val &= 1; | 
 | 161 |  | 
 | 162 | 	dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n", | 
 | 163 | 		minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit, | 
 | 164 | 		val); | 
 | 165 |  | 
 | 166 | 	return val; | 
 | 167 | } | 
 | 168 |  | 
 | 169 | static void pc8736x_gpio_set(unsigned minor, int val) | 
 | 170 | { | 
 | 171 | 	int port, bit, curval; | 
 | 172 |  | 
 | 173 | 	minor &= 0x1f; | 
 | 174 | 	port = minor >> 3; | 
 | 175 | 	bit = minor & 7; | 
 | 176 | 	curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT); | 
 | 177 |  | 
 | 178 | 	dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n", | 
 | 179 | 		pc8736x_gpio_base + port_offset[port] + PORT_OUT, | 
 | 180 | 		curval, bit, (curval & ~(1 << bit)), val, (val << bit)); | 
 | 181 |  | 
 | 182 | 	val = (curval & ~(1 << bit)) | (val << bit); | 
 | 183 |  | 
 | 184 | 	dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)" | 
 | 185 | 		" %2x -> %2x\n", minor, port, bit, curval, val); | 
 | 186 |  | 
 | 187 | 	outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT); | 
 | 188 |  | 
 | 189 | 	curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT); | 
 | 190 | 	val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN); | 
 | 191 |  | 
 | 192 | 	dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val); | 
 | 193 | 	pc8736x_gpio_shadow[port] = val; | 
 | 194 | } | 
 | 195 |  | 
 | 196 | static int pc8736x_gpio_current(unsigned minor) | 
 | 197 | { | 
 | 198 | 	int port, bit; | 
 | 199 | 	minor &= 0x1f; | 
 | 200 | 	port = minor >> 3; | 
 | 201 | 	bit = minor & 7; | 
 | 202 | 	return ((pc8736x_gpio_shadow[port] >> bit) & 0x01); | 
 | 203 | } | 
 | 204 |  | 
 | 205 | static void pc8736x_gpio_change(unsigned index) | 
 | 206 | { | 
 | 207 | 	pc8736x_gpio_set(index, !pc8736x_gpio_current(index)); | 
 | 208 | } | 
 | 209 |  | 
 | 210 | static struct nsc_gpio_ops pc8736x_gpio_ops = { | 
 | 211 | 	.owner		= THIS_MODULE, | 
 | 212 | 	.gpio_config	= pc8736x_gpio_configure, | 
 | 213 | 	.gpio_dump	= nsc_gpio_dump, | 
 | 214 | 	.gpio_get	= pc8736x_gpio_get, | 
 | 215 | 	.gpio_set	= pc8736x_gpio_set, | 
 | 216 | 	.gpio_change	= pc8736x_gpio_change, | 
 | 217 | 	.gpio_current	= pc8736x_gpio_current | 
 | 218 | }; | 
 | 219 |  | 
 | 220 | static int pc8736x_gpio_open(struct inode *inode, struct file *file) | 
 | 221 | { | 
 | 222 | 	unsigned m = iminor(inode); | 
 | 223 | 	file->private_data = &pc8736x_gpio_ops; | 
 | 224 |  | 
 | 225 | 	dev_dbg(&pdev->dev, "open %d\n", m); | 
 | 226 |  | 
 | 227 | 	if (m >= PC8736X_GPIO_CT) | 
 | 228 | 		return -EINVAL; | 
 | 229 | 	return nonseekable_open(inode, file); | 
 | 230 | } | 
 | 231 |  | 
 | 232 | static const struct file_operations pc8736x_gpio_fileops = { | 
 | 233 | 	.owner	= THIS_MODULE, | 
 | 234 | 	.open	= pc8736x_gpio_open, | 
 | 235 | 	.write	= nsc_gpio_write, | 
 | 236 | 	.read	= nsc_gpio_read, | 
 | 237 | 	.llseek = no_llseek, | 
 | 238 | }; | 
 | 239 |  | 
 | 240 | static void __init pc8736x_init_shadow(void) | 
 | 241 | { | 
 | 242 | 	int port; | 
 | 243 |  | 
 | 244 | 	/* read the current values driven on the GPIO signals */ | 
 | 245 | 	for (port = 0; port < 4; ++port) | 
 | 246 | 		pc8736x_gpio_shadow[port] | 
 | 247 | 		    = inb_p(pc8736x_gpio_base + port_offset[port] | 
 | 248 | 			    + PORT_OUT); | 
 | 249 |  | 
 | 250 | } | 
 | 251 |  | 
 | 252 | static struct cdev pc8736x_gpio_cdev; | 
 | 253 |  | 
 | 254 | static int __init pc8736x_gpio_init(void) | 
 | 255 | { | 
 | 256 | 	int rc; | 
 | 257 | 	dev_t devid; | 
 | 258 |  | 
 | 259 | 	pdev = platform_device_alloc(DEVNAME, 0); | 
 | 260 | 	if (!pdev) | 
 | 261 | 		return -ENOMEM; | 
 | 262 |  | 
 | 263 | 	rc = platform_device_add(pdev); | 
 | 264 | 	if (rc) { | 
 | 265 | 		rc = -ENODEV; | 
 | 266 | 		goto undo_platform_dev_alloc; | 
 | 267 | 	} | 
 | 268 | 	dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n"); | 
 | 269 |  | 
 | 270 | 	if (!pc8736x_superio_present()) { | 
 | 271 | 		rc = -ENODEV; | 
 | 272 | 		dev_err(&pdev->dev, "no device found\n"); | 
 | 273 | 		goto undo_platform_dev_add; | 
 | 274 | 	} | 
 | 275 | 	pc8736x_gpio_ops.dev = &pdev->dev; | 
 | 276 |  | 
 | 277 | 	/* Verify that chip and it's GPIO unit are both enabled. | 
 | 278 | 	   My BIOS does this, so I take minimum action here | 
 | 279 | 	 */ | 
 | 280 | 	rc = superio_inb(SIO_CF1); | 
 | 281 | 	if (!(rc & 0x01)) { | 
 | 282 | 		rc = -ENODEV; | 
 | 283 | 		dev_err(&pdev->dev, "device not enabled\n"); | 
 | 284 | 		goto undo_platform_dev_add; | 
 | 285 | 	} | 
 | 286 | 	device_select(SIO_GPIO_UNIT); | 
 | 287 | 	if (!superio_inb(SIO_UNIT_ACT)) { | 
 | 288 | 		rc = -ENODEV; | 
 | 289 | 		dev_err(&pdev->dev, "GPIO unit not enabled\n"); | 
 | 290 | 		goto undo_platform_dev_add; | 
 | 291 | 	} | 
 | 292 |  | 
 | 293 | 	/* read the GPIO unit base addr that chip responds to */ | 
 | 294 | 	pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8 | 
 | 295 | 			     | superio_inb(SIO_BASE_LADDR)); | 
 | 296 |  | 
 | 297 | 	if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) { | 
 | 298 | 		rc = -ENODEV; | 
 | 299 | 		dev_err(&pdev->dev, "GPIO ioport %x busy\n", | 
 | 300 | 			pc8736x_gpio_base); | 
 | 301 | 		goto undo_platform_dev_add; | 
 | 302 | 	} | 
 | 303 | 	dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base); | 
 | 304 |  | 
 | 305 | 	if (major) { | 
 | 306 | 		devid = MKDEV(major, 0); | 
 | 307 | 		rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME); | 
 | 308 | 	} else { | 
 | 309 | 		rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME); | 
 | 310 | 		major = MAJOR(devid); | 
 | 311 | 	} | 
 | 312 |  | 
 | 313 | 	if (rc < 0) { | 
 | 314 | 		dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc); | 
 | 315 | 		goto undo_request_region; | 
 | 316 | 	} | 
 | 317 | 	if (!major) { | 
 | 318 | 		major = rc; | 
 | 319 | 		dev_dbg(&pdev->dev, "got dynamic major %d\n", major); | 
 | 320 | 	} | 
 | 321 |  | 
 | 322 | 	pc8736x_init_shadow(); | 
 | 323 |  | 
 | 324 | 	/* ignore minor errs, and succeed */ | 
 | 325 | 	cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops); | 
 | 326 | 	cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT); | 
 | 327 |  | 
 | 328 | 	return 0; | 
 | 329 |  | 
 | 330 | undo_request_region: | 
 | 331 | 	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); | 
 | 332 | undo_platform_dev_add: | 
 | 333 | 	platform_device_del(pdev); | 
 | 334 | undo_platform_dev_alloc: | 
 | 335 | 	platform_device_put(pdev); | 
 | 336 |  | 
 | 337 | 	return rc; | 
 | 338 | } | 
 | 339 |  | 
 | 340 | static void __exit pc8736x_gpio_cleanup(void) | 
 | 341 | { | 
 | 342 | 	dev_dbg(&pdev->dev, "cleanup\n"); | 
 | 343 |  | 
 | 344 | 	cdev_del(&pc8736x_gpio_cdev); | 
 | 345 | 	unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT); | 
 | 346 | 	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); | 
 | 347 |  | 
 | 348 | 	platform_device_unregister(pdev); | 
 | 349 | } | 
 | 350 |  | 
 | 351 | module_init(pc8736x_gpio_init); | 
 | 352 | module_exit(pc8736x_gpio_cleanup); |