| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |   A FORE Systems 200E-series driver for ATM on Linux. | 
 | 3 |   Christophe Lizzi (lizzi@cnam.fr), October 1999-March 2003. | 
 | 4 |  | 
 | 5 |   Based on the PCA-200E driver from Uwe Dannowski (Uwe.Dannowski@inf.tu-dresden.de). | 
 | 6 |  | 
 | 7 |   This driver simultaneously supports PCA-200E and SBA-200E adapters | 
 | 8 |   on i386, alpha (untested), powerpc, sparc and sparc64 architectures. | 
 | 9 |  | 
 | 10 |   This program is free software; you can redistribute it and/or modify | 
 | 11 |   it under the terms of the GNU General Public License as published by | 
 | 12 |   the Free Software Foundation; either version 2 of the License, or | 
 | 13 |   (at your option) any later version. | 
 | 14 |  | 
 | 15 |   This program is distributed in the hope that it will be useful, | 
 | 16 |   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 17 |   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 | 18 |   GNU General Public License for more details. | 
 | 19 |  | 
 | 20 |   You should have received a copy of the GNU General Public License | 
 | 21 |   along with this program; if not, write to the Free Software | 
 | 22 |   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
 | 23 | */ | 
 | 24 |  | 
 | 25 |  | 
 | 26 | #include <linux/kernel.h> | 
 | 27 | #include <linux/slab.h> | 
 | 28 | #include <linux/init.h> | 
 | 29 | #include <linux/capability.h> | 
 | 30 | #include <linux/interrupt.h> | 
 | 31 | #include <linux/bitops.h> | 
 | 32 | #include <linux/pci.h> | 
 | 33 | #include <linux/module.h> | 
 | 34 | #include <linux/atmdev.h> | 
 | 35 | #include <linux/sonet.h> | 
 | 36 | #include <linux/atm_suni.h> | 
 | 37 | #include <linux/dma-mapping.h> | 
 | 38 | #include <linux/delay.h> | 
 | 39 | #include <linux/firmware.h> | 
 | 40 | #include <asm/io.h> | 
 | 41 | #include <asm/string.h> | 
 | 42 | #include <asm/page.h> | 
 | 43 | #include <asm/irq.h> | 
 | 44 | #include <asm/dma.h> | 
 | 45 | #include <asm/byteorder.h> | 
 | 46 | #include <linux/uaccess.h> | 
 | 47 | #include <linux/atomic.h> | 
 | 48 |  | 
 | 49 | #ifdef CONFIG_SBUS | 
 | 50 | #include <linux/of.h> | 
 | 51 | #include <linux/of_device.h> | 
 | 52 | #include <asm/idprom.h> | 
 | 53 | #include <asm/openprom.h> | 
 | 54 | #include <asm/oplib.h> | 
 | 55 | #include <asm/pgtable.h> | 
 | 56 | #endif | 
 | 57 |  | 
 | 58 | #if defined(CONFIG_ATM_FORE200E_USE_TASKLET) /* defer interrupt work to a tasklet */ | 
 | 59 | #define FORE200E_USE_TASKLET | 
 | 60 | #endif | 
 | 61 |  | 
 | 62 | #if 0 /* enable the debugging code of the buffer supply queues */ | 
 | 63 | #define FORE200E_BSQ_DEBUG | 
 | 64 | #endif | 
 | 65 |  | 
 | 66 | #if 1 /* ensure correct handling of 52-byte AAL0 SDUs expected by atmdump-like apps */ | 
 | 67 | #define FORE200E_52BYTE_AAL0_SDU | 
 | 68 | #endif | 
 | 69 |  | 
 | 70 | #include "fore200e.h" | 
 | 71 | #include "suni.h" | 
 | 72 |  | 
 | 73 | #define FORE200E_VERSION "0.3e" | 
 | 74 |  | 
 | 75 | #define FORE200E         "fore200e: " | 
 | 76 |  | 
 | 77 | #if 0 /* override .config */ | 
 | 78 | #define CONFIG_ATM_FORE200E_DEBUG 1 | 
 | 79 | #endif | 
 | 80 | #if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0) | 
 | 81 | #define DPRINTK(level, format, args...)  do { if (CONFIG_ATM_FORE200E_DEBUG >= (level)) \ | 
 | 82 |                                                   printk(FORE200E format, ##args); } while (0) | 
 | 83 | #else | 
 | 84 | #define DPRINTK(level, format, args...)  do {} while (0) | 
 | 85 | #endif | 
 | 86 |  | 
 | 87 |  | 
 | 88 | #define FORE200E_ALIGN(addr, alignment) \ | 
 | 89 |         ((((unsigned long)(addr) + (alignment - 1)) & ~(alignment - 1)) - (unsigned long)(addr)) | 
 | 90 |  | 
 | 91 | #define FORE200E_DMA_INDEX(dma_addr, type, index)  ((dma_addr) + (index) * sizeof(type)) | 
 | 92 |  | 
 | 93 | #define FORE200E_INDEX(virt_addr, type, index)     (&((type *)(virt_addr))[ index ]) | 
 | 94 |  | 
 | 95 | #define FORE200E_NEXT_ENTRY(index, modulo)         (index = ((index) + 1) % (modulo)) | 
 | 96 |  | 
 | 97 | #if 1 | 
 | 98 | #define ASSERT(expr)     if (!(expr)) { \ | 
 | 99 | 			     printk(FORE200E "assertion failed! %s[%d]: %s\n", \ | 
 | 100 | 				    __func__, __LINE__, #expr); \ | 
 | 101 | 			     panic(FORE200E "%s", __func__); \ | 
 | 102 | 			 } | 
 | 103 | #else | 
 | 104 | #define ASSERT(expr)     do {} while (0) | 
 | 105 | #endif | 
 | 106 |  | 
 | 107 |  | 
 | 108 | static const struct atmdev_ops   fore200e_ops; | 
 | 109 | static const struct fore200e_bus fore200e_bus[]; | 
 | 110 |  | 
 | 111 | static LIST_HEAD(fore200e_boards); | 
 | 112 |  | 
 | 113 |  | 
 | 114 | MODULE_AUTHOR("Christophe Lizzi - credits to Uwe Dannowski and Heikki Vatiainen"); | 
 | 115 | MODULE_DESCRIPTION("FORE Systems 200E-series ATM driver - version " FORE200E_VERSION); | 
 | 116 | MODULE_SUPPORTED_DEVICE("PCA-200E, SBA-200E"); | 
 | 117 |  | 
 | 118 |  | 
 | 119 | static const int fore200e_rx_buf_nbr[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = { | 
 | 120 |     { BUFFER_S1_NBR, BUFFER_L1_NBR }, | 
 | 121 |     { BUFFER_S2_NBR, BUFFER_L2_NBR } | 
 | 122 | }; | 
 | 123 |  | 
 | 124 | static const int fore200e_rx_buf_size[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = { | 
 | 125 |     { BUFFER_S1_SIZE, BUFFER_L1_SIZE }, | 
 | 126 |     { BUFFER_S2_SIZE, BUFFER_L2_SIZE } | 
 | 127 | }; | 
 | 128 |  | 
 | 129 |  | 
 | 130 | #if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0) | 
 | 131 | static const char* fore200e_traffic_class[] = { "NONE", "UBR", "CBR", "VBR", "ABR", "ANY" }; | 
 | 132 | #endif | 
 | 133 |  | 
 | 134 |  | 
 | 135 | #if 0 /* currently unused */ | 
 | 136 | static int  | 
 | 137 | fore200e_fore2atm_aal(enum fore200e_aal aal) | 
 | 138 | { | 
 | 139 |     switch(aal) { | 
 | 140 |     case FORE200E_AAL0:  return ATM_AAL0; | 
 | 141 |     case FORE200E_AAL34: return ATM_AAL34; | 
 | 142 |     case FORE200E_AAL5:  return ATM_AAL5; | 
 | 143 |     } | 
 | 144 |  | 
 | 145 |     return -EINVAL; | 
 | 146 | } | 
 | 147 | #endif | 
 | 148 |  | 
 | 149 |  | 
 | 150 | static enum fore200e_aal | 
 | 151 | fore200e_atm2fore_aal(int aal) | 
 | 152 | { | 
 | 153 |     switch(aal) { | 
 | 154 |     case ATM_AAL0:  return FORE200E_AAL0; | 
 | 155 |     case ATM_AAL34: return FORE200E_AAL34; | 
 | 156 |     case ATM_AAL1: | 
 | 157 |     case ATM_AAL2: | 
 | 158 |     case ATM_AAL5:  return FORE200E_AAL5; | 
 | 159 |     } | 
 | 160 |  | 
 | 161 |     return -EINVAL; | 
 | 162 | } | 
 | 163 |  | 
 | 164 |  | 
 | 165 | static char* | 
 | 166 | fore200e_irq_itoa(int irq) | 
 | 167 | { | 
 | 168 |     static char str[8]; | 
 | 169 |     sprintf(str, "%d", irq); | 
 | 170 |     return str; | 
 | 171 | } | 
 | 172 |  | 
 | 173 |  | 
 | 174 | /* allocate and align a chunk of memory intended to hold the data behing exchanged | 
 | 175 |    between the driver and the adapter (using streaming DVMA) */ | 
 | 176 |  | 
 | 177 | static int | 
 | 178 | fore200e_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk, int size, int alignment, int direction) | 
 | 179 | { | 
 | 180 |     unsigned long offset = 0; | 
 | 181 |  | 
 | 182 |     if (alignment <= sizeof(int)) | 
 | 183 | 	alignment = 0; | 
 | 184 |  | 
 | 185 |     chunk->alloc_size = size + alignment; | 
 | 186 |     chunk->align_size = size; | 
 | 187 |     chunk->direction  = direction; | 
 | 188 |  | 
 | 189 |     chunk->alloc_addr = kzalloc(chunk->alloc_size, GFP_KERNEL | GFP_DMA); | 
 | 190 |     if (chunk->alloc_addr == NULL) | 
 | 191 | 	return -ENOMEM; | 
 | 192 |  | 
 | 193 |     if (alignment > 0) | 
 | 194 | 	offset = FORE200E_ALIGN(chunk->alloc_addr, alignment);  | 
 | 195 |      | 
 | 196 |     chunk->align_addr = chunk->alloc_addr + offset; | 
 | 197 |  | 
 | 198 |     chunk->dma_addr = fore200e->bus->dma_map(fore200e, chunk->align_addr, chunk->align_size, direction); | 
 | 199 |      | 
 | 200 |     return 0; | 
 | 201 | } | 
 | 202 |  | 
 | 203 |  | 
 | 204 | /* free a chunk of memory */ | 
 | 205 |  | 
 | 206 | static void | 
 | 207 | fore200e_chunk_free(struct fore200e* fore200e, struct chunk* chunk) | 
 | 208 | { | 
 | 209 |     fore200e->bus->dma_unmap(fore200e, chunk->dma_addr, chunk->dma_size, chunk->direction); | 
 | 210 |  | 
 | 211 |     kfree(chunk->alloc_addr); | 
 | 212 | } | 
 | 213 |  | 
 | 214 |  | 
 | 215 | static void | 
 | 216 | fore200e_spin(int msecs) | 
 | 217 | { | 
 | 218 |     unsigned long timeout = jiffies + msecs_to_jiffies(msecs); | 
 | 219 |     while (time_before(jiffies, timeout)); | 
 | 220 | } | 
 | 221 |  | 
 | 222 |  | 
 | 223 | static int | 
 | 224 | fore200e_poll(struct fore200e* fore200e, volatile u32* addr, u32 val, int msecs) | 
 | 225 | { | 
 | 226 |     unsigned long timeout = jiffies + msecs_to_jiffies(msecs); | 
 | 227 |     int           ok; | 
 | 228 |  | 
 | 229 |     mb(); | 
 | 230 |     do { | 
 | 231 | 	if ((ok = (*addr == val)) || (*addr & STATUS_ERROR)) | 
 | 232 | 	    break; | 
 | 233 |  | 
 | 234 |     } while (time_before(jiffies, timeout)); | 
 | 235 |  | 
 | 236 | #if 1 | 
 | 237 |     if (!ok) { | 
 | 238 | 	printk(FORE200E "cmd polling failed, got status 0x%08x, expected 0x%08x\n", | 
 | 239 | 	       *addr, val); | 
 | 240 |     } | 
 | 241 | #endif | 
 | 242 |  | 
 | 243 |     return ok; | 
 | 244 | } | 
 | 245 |  | 
 | 246 |  | 
 | 247 | static int | 
 | 248 | fore200e_io_poll(struct fore200e* fore200e, volatile u32 __iomem *addr, u32 val, int msecs) | 
 | 249 | { | 
 | 250 |     unsigned long timeout = jiffies + msecs_to_jiffies(msecs); | 
 | 251 |     int           ok; | 
 | 252 |  | 
 | 253 |     do { | 
 | 254 | 	if ((ok = (fore200e->bus->read(addr) == val))) | 
 | 255 | 	    break; | 
 | 256 |  | 
 | 257 |     } while (time_before(jiffies, timeout)); | 
 | 258 |  | 
 | 259 | #if 1 | 
 | 260 |     if (!ok) { | 
 | 261 | 	printk(FORE200E "I/O polling failed, got status 0x%08x, expected 0x%08x\n", | 
 | 262 | 	       fore200e->bus->read(addr), val); | 
 | 263 |     } | 
 | 264 | #endif | 
 | 265 |  | 
 | 266 |     return ok; | 
 | 267 | } | 
 | 268 |  | 
 | 269 |  | 
 | 270 | static void | 
 | 271 | fore200e_free_rx_buf(struct fore200e* fore200e) | 
 | 272 | { | 
 | 273 |     int scheme, magn, nbr; | 
 | 274 |     struct buffer* buffer; | 
 | 275 |  | 
 | 276 |     for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
 | 277 | 	for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
 | 278 |  | 
 | 279 | 	    if ((buffer = fore200e->host_bsq[ scheme ][ magn ].buffer) != NULL) { | 
 | 280 |  | 
 | 281 | 		for (nbr = 0; nbr < fore200e_rx_buf_nbr[ scheme ][ magn ]; nbr++) { | 
 | 282 |  | 
 | 283 | 		    struct chunk* data = &buffer[ nbr ].data; | 
 | 284 |  | 
 | 285 | 		    if (data->alloc_addr != NULL) | 
 | 286 | 			fore200e_chunk_free(fore200e, data); | 
 | 287 | 		} | 
 | 288 | 	    } | 
 | 289 | 	} | 
 | 290 |     } | 
 | 291 | } | 
 | 292 |  | 
 | 293 |  | 
 | 294 | static void | 
 | 295 | fore200e_uninit_bs_queue(struct fore200e* fore200e) | 
 | 296 | { | 
 | 297 |     int scheme, magn; | 
 | 298 |      | 
 | 299 |     for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
 | 300 | 	for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
 | 301 |  | 
 | 302 | 	    struct chunk* status    = &fore200e->host_bsq[ scheme ][ magn ].status; | 
 | 303 | 	    struct chunk* rbd_block = &fore200e->host_bsq[ scheme ][ magn ].rbd_block; | 
 | 304 | 	     | 
 | 305 | 	    if (status->alloc_addr) | 
 | 306 | 		fore200e->bus->dma_chunk_free(fore200e, status); | 
 | 307 | 	     | 
 | 308 | 	    if (rbd_block->alloc_addr) | 
 | 309 | 		fore200e->bus->dma_chunk_free(fore200e, rbd_block); | 
 | 310 | 	} | 
 | 311 |     } | 
 | 312 | } | 
 | 313 |  | 
 | 314 |  | 
 | 315 | static int | 
 | 316 | fore200e_reset(struct fore200e* fore200e, int diag) | 
 | 317 | { | 
 | 318 |     int ok; | 
 | 319 |  | 
 | 320 |     fore200e->cp_monitor = fore200e->virt_base + FORE200E_CP_MONITOR_OFFSET; | 
 | 321 |      | 
 | 322 |     fore200e->bus->write(BSTAT_COLD_START, &fore200e->cp_monitor->bstat); | 
 | 323 |  | 
 | 324 |     fore200e->bus->reset(fore200e); | 
 | 325 |  | 
 | 326 |     if (diag) { | 
 | 327 | 	ok = fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_SELFTEST_OK, 1000); | 
 | 328 | 	if (ok == 0) { | 
 | 329 | 	     | 
 | 330 | 	    printk(FORE200E "device %s self-test failed\n", fore200e->name); | 
 | 331 | 	    return -ENODEV; | 
 | 332 | 	} | 
 | 333 |  | 
 | 334 | 	printk(FORE200E "device %s self-test passed\n", fore200e->name); | 
 | 335 | 	 | 
 | 336 | 	fore200e->state = FORE200E_STATE_RESET; | 
 | 337 |     } | 
 | 338 |  | 
 | 339 |     return 0; | 
 | 340 | } | 
 | 341 |  | 
 | 342 |  | 
 | 343 | static void | 
 | 344 | fore200e_shutdown(struct fore200e* fore200e) | 
 | 345 | { | 
 | 346 |     printk(FORE200E "removing device %s at 0x%lx, IRQ %s\n", | 
 | 347 | 	   fore200e->name, fore200e->phys_base,  | 
 | 348 | 	   fore200e_irq_itoa(fore200e->irq)); | 
 | 349 |      | 
 | 350 |     if (fore200e->state > FORE200E_STATE_RESET) { | 
 | 351 | 	/* first, reset the board to prevent further interrupts or data transfers */ | 
 | 352 | 	fore200e_reset(fore200e, 0); | 
 | 353 |     } | 
 | 354 |      | 
 | 355 |     /* then, release all allocated resources */ | 
 | 356 |     switch(fore200e->state) { | 
 | 357 |  | 
 | 358 |     case FORE200E_STATE_COMPLETE: | 
 | 359 | 	kfree(fore200e->stats); | 
 | 360 |  | 
 | 361 | 	/* fall through */ | 
 | 362 |     case FORE200E_STATE_IRQ: | 
 | 363 | 	free_irq(fore200e->irq, fore200e->atm_dev); | 
 | 364 |  | 
 | 365 | 	/* fall through */ | 
 | 366 |     case FORE200E_STATE_ALLOC_BUF: | 
 | 367 | 	fore200e_free_rx_buf(fore200e); | 
 | 368 |  | 
 | 369 | 	/* fall through */ | 
 | 370 |     case FORE200E_STATE_INIT_BSQ: | 
 | 371 | 	fore200e_uninit_bs_queue(fore200e); | 
 | 372 |  | 
 | 373 | 	/* fall through */ | 
 | 374 |     case FORE200E_STATE_INIT_RXQ: | 
 | 375 | 	fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_rxq.status); | 
 | 376 | 	fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_rxq.rpd); | 
 | 377 |  | 
 | 378 | 	/* fall through */ | 
 | 379 |     case FORE200E_STATE_INIT_TXQ: | 
 | 380 | 	fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_txq.status); | 
 | 381 | 	fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_txq.tpd); | 
 | 382 |  | 
 | 383 | 	/* fall through */ | 
 | 384 |     case FORE200E_STATE_INIT_CMDQ: | 
 | 385 | 	fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_cmdq.status); | 
 | 386 |  | 
 | 387 | 	/* fall through */ | 
 | 388 |     case FORE200E_STATE_INITIALIZE: | 
 | 389 | 	/* nothing to do for that state */ | 
 | 390 |  | 
 | 391 |     case FORE200E_STATE_START_FW: | 
 | 392 | 	/* nothing to do for that state */ | 
 | 393 |  | 
 | 394 |     case FORE200E_STATE_RESET: | 
 | 395 | 	/* nothing to do for that state */ | 
 | 396 |  | 
 | 397 |     case FORE200E_STATE_MAP: | 
 | 398 | 	fore200e->bus->unmap(fore200e); | 
 | 399 |  | 
 | 400 | 	/* fall through */ | 
 | 401 |     case FORE200E_STATE_CONFIGURE: | 
 | 402 | 	/* nothing to do for that state */ | 
 | 403 |  | 
 | 404 |     case FORE200E_STATE_REGISTER: | 
 | 405 | 	/* XXX shouldn't we *start* by deregistering the device? */ | 
 | 406 | 	atm_dev_deregister(fore200e->atm_dev); | 
 | 407 |  | 
 | 408 |     case FORE200E_STATE_BLANK: | 
 | 409 | 	/* nothing to do for that state */ | 
 | 410 | 	break; | 
 | 411 |     } | 
 | 412 | } | 
 | 413 |  | 
 | 414 |  | 
 | 415 | #ifdef CONFIG_PCI | 
 | 416 |  | 
 | 417 | static u32 fore200e_pca_read(volatile u32 __iomem *addr) | 
 | 418 | { | 
 | 419 |     /* on big-endian hosts, the board is configured to convert | 
 | 420 |        the endianess of slave RAM accesses  */ | 
 | 421 |     return le32_to_cpu(readl(addr)); | 
 | 422 | } | 
 | 423 |  | 
 | 424 |  | 
 | 425 | static void fore200e_pca_write(u32 val, volatile u32 __iomem *addr) | 
 | 426 | { | 
 | 427 |     /* on big-endian hosts, the board is configured to convert | 
 | 428 |        the endianess of slave RAM accesses  */ | 
 | 429 |     writel(cpu_to_le32(val), addr); | 
 | 430 | } | 
 | 431 |  | 
 | 432 |  | 
 | 433 | static u32 | 
 | 434 | fore200e_pca_dma_map(struct fore200e* fore200e, void* virt_addr, int size, int direction) | 
 | 435 | { | 
 | 436 |     u32 dma_addr = dma_map_single(&((struct pci_dev *) fore200e->bus_dev)->dev, virt_addr, size, direction); | 
 | 437 |  | 
 | 438 |     DPRINTK(3, "PCI DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d,  --> dma_addr = 0x%08x\n", | 
 | 439 | 	    virt_addr, size, direction, dma_addr); | 
 | 440 |      | 
 | 441 |     return dma_addr; | 
 | 442 | } | 
 | 443 |  | 
 | 444 |  | 
 | 445 | static void | 
 | 446 | fore200e_pca_dma_unmap(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
 | 447 | { | 
 | 448 |     DPRINTK(3, "PCI DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d\n", | 
 | 449 | 	    dma_addr, size, direction); | 
 | 450 |  | 
 | 451 |     dma_unmap_single(&((struct pci_dev *) fore200e->bus_dev)->dev, dma_addr, size, direction); | 
 | 452 | } | 
 | 453 |  | 
 | 454 |  | 
 | 455 | static void | 
 | 456 | fore200e_pca_dma_sync_for_cpu(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
 | 457 | { | 
 | 458 |     DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
 | 459 |  | 
 | 460 |     dma_sync_single_for_cpu(&((struct pci_dev *) fore200e->bus_dev)->dev, dma_addr, size, direction); | 
 | 461 | } | 
 | 462 |  | 
 | 463 | static void | 
 | 464 | fore200e_pca_dma_sync_for_device(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
 | 465 | { | 
 | 466 |     DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
 | 467 |  | 
 | 468 |     dma_sync_single_for_device(&((struct pci_dev *) fore200e->bus_dev)->dev, dma_addr, size, direction); | 
 | 469 | } | 
 | 470 |  | 
 | 471 |  | 
 | 472 | /* allocate a DMA consistent chunk of memory intended to act as a communication mechanism | 
 | 473 |    (to hold descriptors, status, queues, etc.) shared by the driver and the adapter */ | 
 | 474 |  | 
 | 475 | static int | 
 | 476 | fore200e_pca_dma_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk, | 
 | 477 | 			     int size, int nbr, int alignment) | 
 | 478 | { | 
 | 479 |     /* returned chunks are page-aligned */ | 
 | 480 |     chunk->alloc_size = size * nbr; | 
 | 481 |     chunk->alloc_addr = dma_alloc_coherent(&((struct pci_dev *) fore200e->bus_dev)->dev, | 
 | 482 | 					   chunk->alloc_size, | 
 | 483 | 					   &chunk->dma_addr, | 
 | 484 | 					   GFP_KERNEL); | 
 | 485 |      | 
 | 486 |     if ((chunk->alloc_addr == NULL) || (chunk->dma_addr == 0)) | 
 | 487 | 	return -ENOMEM; | 
 | 488 |  | 
 | 489 |     chunk->align_addr = chunk->alloc_addr; | 
 | 490 |      | 
 | 491 |     return 0; | 
 | 492 | } | 
 | 493 |  | 
 | 494 |  | 
 | 495 | /* free a DMA consistent chunk of memory */ | 
 | 496 |  | 
 | 497 | static void | 
 | 498 | fore200e_pca_dma_chunk_free(struct fore200e* fore200e, struct chunk* chunk) | 
 | 499 | { | 
 | 500 |     dma_free_coherent(&((struct pci_dev *) fore200e->bus_dev)->dev, | 
 | 501 | 			chunk->alloc_size, | 
 | 502 | 			chunk->alloc_addr, | 
 | 503 | 			chunk->dma_addr); | 
 | 504 | } | 
 | 505 |  | 
 | 506 |  | 
 | 507 | static int | 
 | 508 | fore200e_pca_irq_check(struct fore200e* fore200e) | 
 | 509 | { | 
 | 510 |     /* this is a 1 bit register */ | 
 | 511 |     int irq_posted = readl(fore200e->regs.pca.psr); | 
 | 512 |  | 
 | 513 | #if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG == 2) | 
 | 514 |     if (irq_posted && (readl(fore200e->regs.pca.hcr) & PCA200E_HCR_OUTFULL)) { | 
 | 515 | 	DPRINTK(2,"FIFO OUT full, device %d\n", fore200e->atm_dev->number); | 
 | 516 |     } | 
 | 517 | #endif | 
 | 518 |  | 
 | 519 |     return irq_posted; | 
 | 520 | } | 
 | 521 |  | 
 | 522 |  | 
 | 523 | static void | 
 | 524 | fore200e_pca_irq_ack(struct fore200e* fore200e) | 
 | 525 | { | 
 | 526 |     writel(PCA200E_HCR_CLRINTR, fore200e->regs.pca.hcr); | 
 | 527 | } | 
 | 528 |  | 
 | 529 |  | 
 | 530 | static void | 
 | 531 | fore200e_pca_reset(struct fore200e* fore200e) | 
 | 532 | { | 
 | 533 |     writel(PCA200E_HCR_RESET, fore200e->regs.pca.hcr); | 
 | 534 |     fore200e_spin(10); | 
 | 535 |     writel(0, fore200e->regs.pca.hcr); | 
 | 536 | } | 
 | 537 |  | 
 | 538 |  | 
 | 539 | static int fore200e_pca_map(struct fore200e* fore200e) | 
 | 540 | { | 
 | 541 |     DPRINTK(2, "device %s being mapped in memory\n", fore200e->name); | 
 | 542 |  | 
 | 543 |     fore200e->virt_base = ioremap(fore200e->phys_base, PCA200E_IOSPACE_LENGTH); | 
 | 544 |      | 
 | 545 |     if (fore200e->virt_base == NULL) { | 
 | 546 | 	printk(FORE200E "can't map device %s\n", fore200e->name); | 
 | 547 | 	return -EFAULT; | 
 | 548 |     } | 
 | 549 |  | 
 | 550 |     DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base); | 
 | 551 |  | 
 | 552 |     /* gain access to the PCA specific registers  */ | 
 | 553 |     fore200e->regs.pca.hcr = fore200e->virt_base + PCA200E_HCR_OFFSET; | 
 | 554 |     fore200e->regs.pca.imr = fore200e->virt_base + PCA200E_IMR_OFFSET; | 
 | 555 |     fore200e->regs.pca.psr = fore200e->virt_base + PCA200E_PSR_OFFSET; | 
 | 556 |  | 
 | 557 |     fore200e->state = FORE200E_STATE_MAP; | 
 | 558 |     return 0; | 
 | 559 | } | 
 | 560 |  | 
 | 561 |  | 
 | 562 | static void | 
 | 563 | fore200e_pca_unmap(struct fore200e* fore200e) | 
 | 564 | { | 
 | 565 |     DPRINTK(2, "device %s being unmapped from memory\n", fore200e->name); | 
 | 566 |  | 
 | 567 |     if (fore200e->virt_base != NULL) | 
 | 568 | 	iounmap(fore200e->virt_base); | 
 | 569 | } | 
 | 570 |  | 
 | 571 |  | 
 | 572 | static int fore200e_pca_configure(struct fore200e *fore200e) | 
 | 573 | { | 
 | 574 |     struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev; | 
 | 575 |     u8              master_ctrl, latency; | 
 | 576 |  | 
 | 577 |     DPRINTK(2, "device %s being configured\n", fore200e->name); | 
 | 578 |  | 
 | 579 |     if ((pci_dev->irq == 0) || (pci_dev->irq == 0xFF)) { | 
 | 580 | 	printk(FORE200E "incorrect IRQ setting - misconfigured PCI-PCI bridge?\n"); | 
 | 581 | 	return -EIO; | 
 | 582 |     } | 
 | 583 |  | 
 | 584 |     pci_read_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, &master_ctrl); | 
 | 585 |  | 
 | 586 |     master_ctrl = master_ctrl | 
 | 587 | #if defined(__BIG_ENDIAN) | 
 | 588 | 	/* request the PCA board to convert the endianess of slave RAM accesses */ | 
 | 589 | 	| PCA200E_CTRL_CONVERT_ENDIAN | 
 | 590 | #endif | 
 | 591 | #if 0 | 
 | 592 |         | PCA200E_CTRL_DIS_CACHE_RD | 
 | 593 |         | PCA200E_CTRL_DIS_WRT_INVAL | 
 | 594 |         | PCA200E_CTRL_ENA_CONT_REQ_MODE | 
 | 595 |         | PCA200E_CTRL_2_CACHE_WRT_INVAL | 
 | 596 | #endif | 
 | 597 | 	| PCA200E_CTRL_LARGE_PCI_BURSTS; | 
 | 598 |      | 
 | 599 |     pci_write_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, master_ctrl); | 
 | 600 |  | 
 | 601 |     /* raise latency from 32 (default) to 192, as this seems to prevent NIC | 
 | 602 |        lockups (under heavy rx loads) due to continuous 'FIFO OUT full' condition. | 
 | 603 |        this may impact the performances of other PCI devices on the same bus, though */ | 
 | 604 |     latency = 192; | 
 | 605 |     pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency); | 
 | 606 |  | 
 | 607 |     fore200e->state = FORE200E_STATE_CONFIGURE; | 
 | 608 |     return 0; | 
 | 609 | } | 
 | 610 |  | 
 | 611 |  | 
 | 612 | static int __init | 
 | 613 | fore200e_pca_prom_read(struct fore200e* fore200e, struct prom_data* prom) | 
 | 614 | { | 
 | 615 |     struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
 | 616 |     struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
 | 617 |     struct prom_opcode      opcode; | 
 | 618 |     int                     ok; | 
 | 619 |     u32                     prom_dma; | 
 | 620 |  | 
 | 621 |     FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
 | 622 |  | 
 | 623 |     opcode.opcode = OPCODE_GET_PROM; | 
 | 624 |     opcode.pad    = 0; | 
 | 625 |  | 
 | 626 |     prom_dma = fore200e->bus->dma_map(fore200e, prom, sizeof(struct prom_data), DMA_FROM_DEVICE); | 
 | 627 |  | 
 | 628 |     fore200e->bus->write(prom_dma, &entry->cp_entry->cmd.prom_block.prom_haddr); | 
 | 629 |      | 
 | 630 |     *entry->status = STATUS_PENDING; | 
 | 631 |  | 
 | 632 |     fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.prom_block.opcode); | 
 | 633 |  | 
 | 634 |     ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
 | 635 |  | 
 | 636 |     *entry->status = STATUS_FREE; | 
 | 637 |  | 
 | 638 |     fore200e->bus->dma_unmap(fore200e, prom_dma, sizeof(struct prom_data), DMA_FROM_DEVICE); | 
 | 639 |  | 
 | 640 |     if (ok == 0) { | 
 | 641 | 	printk(FORE200E "unable to get PROM data from device %s\n", fore200e->name); | 
 | 642 | 	return -EIO; | 
 | 643 |     } | 
 | 644 |  | 
 | 645 | #if defined(__BIG_ENDIAN) | 
 | 646 |      | 
 | 647 | #define swap_here(addr) (*((u32*)(addr)) = swab32( *((u32*)(addr)) )) | 
 | 648 |  | 
 | 649 |     /* MAC address is stored as little-endian */ | 
 | 650 |     swap_here(&prom->mac_addr[0]); | 
 | 651 |     swap_here(&prom->mac_addr[4]); | 
 | 652 | #endif | 
 | 653 |      | 
 | 654 |     return 0; | 
 | 655 | } | 
 | 656 |  | 
 | 657 |  | 
 | 658 | static int | 
 | 659 | fore200e_pca_proc_read(struct fore200e* fore200e, char *page) | 
 | 660 | { | 
 | 661 |     struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev; | 
 | 662 |  | 
 | 663 |     return sprintf(page, "   PCI bus/slot/function:\t%d/%d/%d\n", | 
 | 664 | 		   pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn)); | 
 | 665 | } | 
 | 666 |  | 
 | 667 | #endif /* CONFIG_PCI */ | 
 | 668 |  | 
 | 669 |  | 
 | 670 | #ifdef CONFIG_SBUS | 
 | 671 |  | 
 | 672 | static u32 fore200e_sba_read(volatile u32 __iomem *addr) | 
 | 673 | { | 
 | 674 |     return sbus_readl(addr); | 
 | 675 | } | 
 | 676 |  | 
 | 677 | static void fore200e_sba_write(u32 val, volatile u32 __iomem *addr) | 
 | 678 | { | 
 | 679 |     sbus_writel(val, addr); | 
 | 680 | } | 
 | 681 |  | 
 | 682 | static u32 fore200e_sba_dma_map(struct fore200e *fore200e, void* virt_addr, int size, int direction) | 
 | 683 | { | 
 | 684 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 685 | 	u32 dma_addr; | 
 | 686 |  | 
 | 687 | 	dma_addr = dma_map_single(&op->dev, virt_addr, size, direction); | 
 | 688 |  | 
 | 689 | 	DPRINTK(3, "SBUS DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d --> dma_addr = 0x%08x\n", | 
 | 690 | 		virt_addr, size, direction, dma_addr); | 
 | 691 |      | 
 | 692 | 	return dma_addr; | 
 | 693 | } | 
 | 694 |  | 
 | 695 | static void fore200e_sba_dma_unmap(struct fore200e *fore200e, u32 dma_addr, int size, int direction) | 
 | 696 | { | 
 | 697 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 698 |  | 
 | 699 | 	DPRINTK(3, "SBUS DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d,\n", | 
 | 700 | 		dma_addr, size, direction); | 
 | 701 |  | 
 | 702 | 	dma_unmap_single(&op->dev, dma_addr, size, direction); | 
 | 703 | } | 
 | 704 |  | 
 | 705 | static void fore200e_sba_dma_sync_for_cpu(struct fore200e *fore200e, u32 dma_addr, int size, int direction) | 
 | 706 | { | 
 | 707 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 708 |  | 
 | 709 | 	DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
 | 710 |      | 
 | 711 | 	dma_sync_single_for_cpu(&op->dev, dma_addr, size, direction); | 
 | 712 | } | 
 | 713 |  | 
 | 714 | static void fore200e_sba_dma_sync_for_device(struct fore200e *fore200e, u32 dma_addr, int size, int direction) | 
 | 715 | { | 
 | 716 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 717 |  | 
 | 718 | 	DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
 | 719 |  | 
 | 720 | 	dma_sync_single_for_device(&op->dev, dma_addr, size, direction); | 
 | 721 | } | 
 | 722 |  | 
 | 723 | /* Allocate a DVMA consistent chunk of memory intended to act as a communication mechanism | 
 | 724 |  * (to hold descriptors, status, queues, etc.) shared by the driver and the adapter. | 
 | 725 |  */ | 
 | 726 | static int fore200e_sba_dma_chunk_alloc(struct fore200e *fore200e, struct chunk *chunk, | 
 | 727 | 					int size, int nbr, int alignment) | 
 | 728 | { | 
 | 729 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 730 |  | 
 | 731 | 	chunk->alloc_size = chunk->align_size = size * nbr; | 
 | 732 |  | 
 | 733 | 	/* returned chunks are page-aligned */ | 
 | 734 | 	chunk->alloc_addr = dma_alloc_coherent(&op->dev, chunk->alloc_size, | 
 | 735 | 					       &chunk->dma_addr, GFP_ATOMIC); | 
 | 736 |  | 
 | 737 | 	if ((chunk->alloc_addr == NULL) || (chunk->dma_addr == 0)) | 
 | 738 | 		return -ENOMEM; | 
 | 739 |  | 
 | 740 | 	chunk->align_addr = chunk->alloc_addr; | 
 | 741 |      | 
 | 742 | 	return 0; | 
 | 743 | } | 
 | 744 |  | 
 | 745 | /* free a DVMA consistent chunk of memory */ | 
 | 746 | static void fore200e_sba_dma_chunk_free(struct fore200e *fore200e, struct chunk *chunk) | 
 | 747 | { | 
 | 748 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 749 |  | 
 | 750 | 	dma_free_coherent(&op->dev, chunk->alloc_size, | 
 | 751 | 			  chunk->alloc_addr, chunk->dma_addr); | 
 | 752 | } | 
 | 753 |  | 
 | 754 | static void fore200e_sba_irq_enable(struct fore200e *fore200e) | 
 | 755 | { | 
 | 756 | 	u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY; | 
 | 757 | 	fore200e->bus->write(hcr | SBA200E_HCR_INTR_ENA, fore200e->regs.sba.hcr); | 
 | 758 | } | 
 | 759 |  | 
 | 760 | static int fore200e_sba_irq_check(struct fore200e *fore200e) | 
 | 761 | { | 
 | 762 | 	return fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_INTR_REQ; | 
 | 763 | } | 
 | 764 |  | 
 | 765 | static void fore200e_sba_irq_ack(struct fore200e *fore200e) | 
 | 766 | { | 
 | 767 | 	u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY; | 
 | 768 | 	fore200e->bus->write(hcr | SBA200E_HCR_INTR_CLR, fore200e->regs.sba.hcr); | 
 | 769 | } | 
 | 770 |  | 
 | 771 | static void fore200e_sba_reset(struct fore200e *fore200e) | 
 | 772 | { | 
 | 773 | 	fore200e->bus->write(SBA200E_HCR_RESET, fore200e->regs.sba.hcr); | 
 | 774 | 	fore200e_spin(10); | 
 | 775 | 	fore200e->bus->write(0, fore200e->regs.sba.hcr); | 
 | 776 | } | 
 | 777 |  | 
 | 778 | static int __init fore200e_sba_map(struct fore200e *fore200e) | 
 | 779 | { | 
 | 780 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 781 | 	unsigned int bursts; | 
 | 782 |  | 
 | 783 | 	/* gain access to the SBA specific registers  */ | 
 | 784 | 	fore200e->regs.sba.hcr = of_ioremap(&op->resource[0], 0, SBA200E_HCR_LENGTH, "SBA HCR"); | 
 | 785 | 	fore200e->regs.sba.bsr = of_ioremap(&op->resource[1], 0, SBA200E_BSR_LENGTH, "SBA BSR"); | 
 | 786 | 	fore200e->regs.sba.isr = of_ioremap(&op->resource[2], 0, SBA200E_ISR_LENGTH, "SBA ISR"); | 
 | 787 | 	fore200e->virt_base    = of_ioremap(&op->resource[3], 0, SBA200E_RAM_LENGTH, "SBA RAM"); | 
 | 788 |  | 
 | 789 | 	if (!fore200e->virt_base) { | 
 | 790 | 		printk(FORE200E "unable to map RAM of device %s\n", fore200e->name); | 
 | 791 | 		return -EFAULT; | 
 | 792 | 	} | 
 | 793 |  | 
 | 794 | 	DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base); | 
 | 795 |      | 
 | 796 | 	fore200e->bus->write(0x02, fore200e->regs.sba.isr); /* XXX hardwired interrupt level */ | 
 | 797 |  | 
 | 798 | 	/* get the supported DVMA burst sizes */ | 
 | 799 | 	bursts = of_getintprop_default(op->dev.of_node->parent, "burst-sizes", 0x00); | 
 | 800 |  | 
 | 801 | 	if (sbus_can_dma_64bit()) | 
 | 802 | 		sbus_set_sbus64(&op->dev, bursts); | 
 | 803 |  | 
 | 804 | 	fore200e->state = FORE200E_STATE_MAP; | 
 | 805 | 	return 0; | 
 | 806 | } | 
 | 807 |  | 
 | 808 | static void fore200e_sba_unmap(struct fore200e *fore200e) | 
 | 809 | { | 
 | 810 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 811 |  | 
 | 812 | 	of_iounmap(&op->resource[0], fore200e->regs.sba.hcr, SBA200E_HCR_LENGTH); | 
 | 813 | 	of_iounmap(&op->resource[1], fore200e->regs.sba.bsr, SBA200E_BSR_LENGTH); | 
 | 814 | 	of_iounmap(&op->resource[2], fore200e->regs.sba.isr, SBA200E_ISR_LENGTH); | 
 | 815 | 	of_iounmap(&op->resource[3], fore200e->virt_base,    SBA200E_RAM_LENGTH); | 
 | 816 | } | 
 | 817 |  | 
 | 818 | static int __init fore200e_sba_configure(struct fore200e *fore200e) | 
 | 819 | { | 
 | 820 | 	fore200e->state = FORE200E_STATE_CONFIGURE; | 
 | 821 | 	return 0; | 
 | 822 | } | 
 | 823 |  | 
 | 824 | static int __init fore200e_sba_prom_read(struct fore200e *fore200e, struct prom_data *prom) | 
 | 825 | { | 
 | 826 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 827 | 	const u8 *prop; | 
 | 828 | 	int len; | 
 | 829 |  | 
 | 830 | 	prop = of_get_property(op->dev.of_node, "madaddrlo2", &len); | 
 | 831 | 	if (!prop) | 
 | 832 | 		return -ENODEV; | 
 | 833 | 	memcpy(&prom->mac_addr[4], prop, 4); | 
 | 834 |  | 
 | 835 | 	prop = of_get_property(op->dev.of_node, "madaddrhi4", &len); | 
 | 836 | 	if (!prop) | 
 | 837 | 		return -ENODEV; | 
 | 838 | 	memcpy(&prom->mac_addr[2], prop, 4); | 
 | 839 |  | 
 | 840 | 	prom->serial_number = of_getintprop_default(op->dev.of_node, | 
 | 841 | 						    "serialnumber", 0); | 
 | 842 | 	prom->hw_revision = of_getintprop_default(op->dev.of_node, | 
 | 843 | 						  "promversion", 0); | 
 | 844 |      | 
 | 845 | 	return 0; | 
 | 846 | } | 
 | 847 |  | 
 | 848 | static int fore200e_sba_proc_read(struct fore200e *fore200e, char *page) | 
 | 849 | { | 
 | 850 | 	struct platform_device *op = fore200e->bus_dev; | 
 | 851 | 	const struct linux_prom_registers *regs; | 
 | 852 |  | 
 | 853 | 	regs = of_get_property(op->dev.of_node, "reg", NULL); | 
 | 854 |  | 
 | 855 | 	return sprintf(page, "   SBUS slot/device:\t\t%d/'%s'\n", | 
 | 856 | 		       (regs ? regs->which_io : 0), op->dev.of_node->name); | 
 | 857 | } | 
 | 858 | #endif /* CONFIG_SBUS */ | 
 | 859 |  | 
 | 860 |  | 
 | 861 | static void | 
 | 862 | fore200e_tx_irq(struct fore200e* fore200e) | 
 | 863 | { | 
 | 864 |     struct host_txq*        txq = &fore200e->host_txq; | 
 | 865 |     struct host_txq_entry*  entry; | 
 | 866 |     struct atm_vcc*         vcc; | 
 | 867 |     struct fore200e_vc_map* vc_map; | 
 | 868 |  | 
 | 869 |     if (fore200e->host_txq.txing == 0) | 
 | 870 | 	return; | 
 | 871 |  | 
 | 872 |     for (;;) { | 
 | 873 | 	 | 
 | 874 | 	entry = &txq->host_entry[ txq->tail ]; | 
 | 875 |  | 
 | 876 |         if ((*entry->status & STATUS_COMPLETE) == 0) { | 
 | 877 | 	    break; | 
 | 878 | 	} | 
 | 879 |  | 
 | 880 | 	DPRINTK(3, "TX COMPLETED: entry = %p [tail = %d], vc_map = %p, skb = %p\n",  | 
 | 881 | 		entry, txq->tail, entry->vc_map, entry->skb); | 
 | 882 |  | 
 | 883 | 	/* free copy of misaligned data */ | 
 | 884 | 	kfree(entry->data); | 
 | 885 | 	 | 
 | 886 | 	/* remove DMA mapping */ | 
 | 887 | 	fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length, | 
 | 888 | 				 DMA_TO_DEVICE); | 
 | 889 |  | 
 | 890 | 	vc_map = entry->vc_map; | 
 | 891 |  | 
 | 892 | 	/* vcc closed since the time the entry was submitted for tx? */ | 
 | 893 | 	if ((vc_map->vcc == NULL) || | 
 | 894 | 	    (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) { | 
 | 895 |  | 
 | 896 | 	    DPRINTK(1, "no ready vcc found for PDU sent on device %d\n", | 
 | 897 | 		    fore200e->atm_dev->number); | 
 | 898 |  | 
 | 899 | 	    dev_kfree_skb_any(entry->skb); | 
 | 900 | 	} | 
 | 901 | 	else { | 
 | 902 | 	    ASSERT(vc_map->vcc); | 
 | 903 |  | 
 | 904 | 	    /* vcc closed then immediately re-opened? */ | 
 | 905 | 	    if (vc_map->incarn != entry->incarn) { | 
 | 906 |  | 
 | 907 | 		/* when a vcc is closed, some PDUs may be still pending in the tx queue. | 
 | 908 | 		   if the same vcc is immediately re-opened, those pending PDUs must | 
 | 909 | 		   not be popped after the completion of their emission, as they refer | 
 | 910 | 		   to the prior incarnation of that vcc. otherwise, sk_atm(vcc)->sk_wmem_alloc | 
 | 911 | 		   would be decremented by the size of the (unrelated) skb, possibly | 
 | 912 | 		   leading to a negative sk->sk_wmem_alloc count, ultimately freezing the vcc. | 
 | 913 | 		   we thus bind the tx entry to the current incarnation of the vcc | 
 | 914 | 		   when the entry is submitted for tx. When the tx later completes, | 
 | 915 | 		   if the incarnation number of the tx entry does not match the one | 
 | 916 | 		   of the vcc, then this implies that the vcc has been closed then re-opened. | 
 | 917 | 		   we thus just drop the skb here. */ | 
 | 918 |  | 
 | 919 | 		DPRINTK(1, "vcc closed-then-re-opened; dropping PDU sent on device %d\n", | 
 | 920 | 			fore200e->atm_dev->number); | 
 | 921 |  | 
 | 922 | 		dev_kfree_skb_any(entry->skb); | 
 | 923 | 	    } | 
 | 924 | 	    else { | 
 | 925 | 		vcc = vc_map->vcc; | 
 | 926 | 		ASSERT(vcc); | 
 | 927 |  | 
 | 928 | 		/* notify tx completion */ | 
 | 929 | 		if (vcc->pop) { | 
 | 930 | 		    vcc->pop(vcc, entry->skb); | 
 | 931 | 		} | 
 | 932 | 		else { | 
 | 933 | 		    dev_kfree_skb_any(entry->skb); | 
 | 934 | 		} | 
 | 935 |  | 
 | 936 | 		/* check error condition */ | 
 | 937 | 		if (*entry->status & STATUS_ERROR) | 
 | 938 | 		    atomic_inc(&vcc->stats->tx_err); | 
 | 939 | 		else | 
 | 940 | 		    atomic_inc(&vcc->stats->tx); | 
 | 941 | 	    } | 
 | 942 | 	} | 
 | 943 |  | 
 | 944 | 	*entry->status = STATUS_FREE; | 
 | 945 |  | 
 | 946 | 	fore200e->host_txq.txing--; | 
 | 947 |  | 
 | 948 | 	FORE200E_NEXT_ENTRY(txq->tail, QUEUE_SIZE_TX); | 
 | 949 |     } | 
 | 950 | } | 
 | 951 |  | 
 | 952 |  | 
 | 953 | #ifdef FORE200E_BSQ_DEBUG | 
 | 954 | int bsq_audit(int where, struct host_bsq* bsq, int scheme, int magn) | 
 | 955 | { | 
 | 956 |     struct buffer* buffer; | 
 | 957 |     int count = 0; | 
 | 958 |  | 
 | 959 |     buffer = bsq->freebuf; | 
 | 960 |     while (buffer) { | 
 | 961 |  | 
 | 962 | 	if (buffer->supplied) { | 
 | 963 | 	    printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld supplied but in free list!\n", | 
 | 964 | 		   where, scheme, magn, buffer->index); | 
 | 965 | 	} | 
 | 966 |  | 
 | 967 | 	if (buffer->magn != magn) { | 
 | 968 | 	    printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected magn = %d\n", | 
 | 969 | 		   where, scheme, magn, buffer->index, buffer->magn); | 
 | 970 | 	} | 
 | 971 |  | 
 | 972 | 	if (buffer->scheme != scheme) { | 
 | 973 | 	    printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected scheme = %d\n", | 
 | 974 | 		   where, scheme, magn, buffer->index, buffer->scheme); | 
 | 975 | 	} | 
 | 976 |  | 
 | 977 | 	if ((buffer->index < 0) || (buffer->index >= fore200e_rx_buf_nbr[ scheme ][ magn ])) { | 
 | 978 | 	    printk(FORE200E "bsq_audit(%d): queue %d.%d, out of range buffer index = %ld !\n", | 
 | 979 | 		   where, scheme, magn, buffer->index); | 
 | 980 | 	} | 
 | 981 |  | 
 | 982 | 	count++; | 
 | 983 | 	buffer = buffer->next; | 
 | 984 |     } | 
 | 985 |  | 
 | 986 |     if (count != bsq->freebuf_count) { | 
 | 987 | 	printk(FORE200E "bsq_audit(%d): queue %d.%d, %d bufs in free list, but freebuf_count = %d\n", | 
 | 988 | 	       where, scheme, magn, count, bsq->freebuf_count); | 
 | 989 |     } | 
 | 990 |     return 0; | 
 | 991 | } | 
 | 992 | #endif | 
 | 993 |  | 
 | 994 |  | 
 | 995 | static void | 
 | 996 | fore200e_supply(struct fore200e* fore200e) | 
 | 997 | { | 
 | 998 |     int  scheme, magn, i; | 
 | 999 |  | 
 | 1000 |     struct host_bsq*       bsq; | 
 | 1001 |     struct host_bsq_entry* entry; | 
 | 1002 |     struct buffer*         buffer; | 
 | 1003 |  | 
 | 1004 |     for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
 | 1005 | 	for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
 | 1006 |  | 
 | 1007 | 	    bsq = &fore200e->host_bsq[ scheme ][ magn ]; | 
 | 1008 |  | 
 | 1009 | #ifdef FORE200E_BSQ_DEBUG | 
 | 1010 | 	    bsq_audit(1, bsq, scheme, magn); | 
 | 1011 | #endif | 
 | 1012 | 	    while (bsq->freebuf_count >= RBD_BLK_SIZE) { | 
 | 1013 |  | 
 | 1014 | 		DPRINTK(2, "supplying %d rx buffers to queue %d / %d, freebuf_count = %d\n", | 
 | 1015 | 			RBD_BLK_SIZE, scheme, magn, bsq->freebuf_count); | 
 | 1016 |  | 
 | 1017 | 		entry = &bsq->host_entry[ bsq->head ]; | 
 | 1018 |  | 
 | 1019 | 		for (i = 0; i < RBD_BLK_SIZE; i++) { | 
 | 1020 |  | 
 | 1021 | 		    /* take the first buffer in the free buffer list */ | 
 | 1022 | 		    buffer = bsq->freebuf; | 
 | 1023 | 		    if (!buffer) { | 
 | 1024 | 			printk(FORE200E "no more free bufs in queue %d.%d, but freebuf_count = %d\n", | 
 | 1025 | 			       scheme, magn, bsq->freebuf_count); | 
 | 1026 | 			return; | 
 | 1027 | 		    } | 
 | 1028 | 		    bsq->freebuf = buffer->next; | 
 | 1029 | 		     | 
 | 1030 | #ifdef FORE200E_BSQ_DEBUG | 
 | 1031 | 		    if (buffer->supplied) | 
 | 1032 | 			printk(FORE200E "queue %d.%d, buffer %lu already supplied\n", | 
 | 1033 | 			       scheme, magn, buffer->index); | 
 | 1034 | 		    buffer->supplied = 1; | 
 | 1035 | #endif | 
 | 1036 | 		    entry->rbd_block->rbd[ i ].buffer_haddr = buffer->data.dma_addr; | 
 | 1037 | 		    entry->rbd_block->rbd[ i ].handle       = FORE200E_BUF2HDL(buffer); | 
 | 1038 | 		} | 
 | 1039 |  | 
 | 1040 | 		FORE200E_NEXT_ENTRY(bsq->head, QUEUE_SIZE_BS); | 
 | 1041 |  | 
 | 1042 |  		/* decrease accordingly the number of free rx buffers */ | 
 | 1043 | 		bsq->freebuf_count -= RBD_BLK_SIZE; | 
 | 1044 |  | 
 | 1045 | 		*entry->status = STATUS_PENDING; | 
 | 1046 | 		fore200e->bus->write(entry->rbd_block_dma, &entry->cp_entry->rbd_block_haddr); | 
 | 1047 | 	    } | 
 | 1048 | 	} | 
 | 1049 |     } | 
 | 1050 | } | 
 | 1051 |  | 
 | 1052 |  | 
 | 1053 | static int | 
 | 1054 | fore200e_push_rpd(struct fore200e* fore200e, struct atm_vcc* vcc, struct rpd* rpd) | 
 | 1055 | { | 
 | 1056 |     struct sk_buff*      skb; | 
 | 1057 |     struct buffer*       buffer; | 
 | 1058 |     struct fore200e_vcc* fore200e_vcc; | 
 | 1059 |     int                  i, pdu_len = 0; | 
 | 1060 | #ifdef FORE200E_52BYTE_AAL0_SDU | 
 | 1061 |     u32                  cell_header = 0; | 
 | 1062 | #endif | 
 | 1063 |  | 
 | 1064 |     ASSERT(vcc); | 
 | 1065 |      | 
 | 1066 |     fore200e_vcc = FORE200E_VCC(vcc); | 
 | 1067 |     ASSERT(fore200e_vcc); | 
 | 1068 |  | 
 | 1069 | #ifdef FORE200E_52BYTE_AAL0_SDU | 
 | 1070 |     if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.rxtp.max_sdu == ATM_AAL0_SDU)) { | 
 | 1071 |  | 
 | 1072 | 	cell_header = (rpd->atm_header.gfc << ATM_HDR_GFC_SHIFT) | | 
 | 1073 | 	              (rpd->atm_header.vpi << ATM_HDR_VPI_SHIFT) | | 
 | 1074 |                       (rpd->atm_header.vci << ATM_HDR_VCI_SHIFT) | | 
 | 1075 |                       (rpd->atm_header.plt << ATM_HDR_PTI_SHIFT) |  | 
 | 1076 |                        rpd->atm_header.clp; | 
 | 1077 | 	pdu_len = 4; | 
 | 1078 |     } | 
 | 1079 | #endif | 
 | 1080 |      | 
 | 1081 |     /* compute total PDU length */ | 
 | 1082 |     for (i = 0; i < rpd->nseg; i++) | 
 | 1083 | 	pdu_len += rpd->rsd[ i ].length; | 
 | 1084 |      | 
 | 1085 |     skb = alloc_skb(pdu_len, GFP_ATOMIC); | 
 | 1086 |     if (skb == NULL) { | 
 | 1087 | 	DPRINTK(2, "unable to alloc new skb, rx PDU length = %d\n", pdu_len); | 
 | 1088 |  | 
 | 1089 | 	atomic_inc(&vcc->stats->rx_drop); | 
 | 1090 | 	return -ENOMEM; | 
 | 1091 |     }  | 
 | 1092 |  | 
 | 1093 |     __net_timestamp(skb); | 
 | 1094 |      | 
 | 1095 | #ifdef FORE200E_52BYTE_AAL0_SDU | 
 | 1096 |     if (cell_header) { | 
 | 1097 | 	*((u32*)skb_put(skb, 4)) = cell_header; | 
 | 1098 |     } | 
 | 1099 | #endif | 
 | 1100 |  | 
 | 1101 |     /* reassemble segments */ | 
 | 1102 |     for (i = 0; i < rpd->nseg; i++) { | 
 | 1103 | 	 | 
 | 1104 | 	/* rebuild rx buffer address from rsd handle */ | 
 | 1105 | 	buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle); | 
 | 1106 | 	 | 
 | 1107 | 	/* Make device DMA transfer visible to CPU.  */ | 
 | 1108 | 	fore200e->bus->dma_sync_for_cpu(fore200e, buffer->data.dma_addr, rpd->rsd[ i ].length, DMA_FROM_DEVICE); | 
 | 1109 | 	 | 
 | 1110 | 	skb_put_data(skb, buffer->data.align_addr, rpd->rsd[i].length); | 
 | 1111 |  | 
 | 1112 | 	/* Now let the device get at it again.  */ | 
 | 1113 | 	fore200e->bus->dma_sync_for_device(fore200e, buffer->data.dma_addr, rpd->rsd[ i ].length, DMA_FROM_DEVICE); | 
 | 1114 |     } | 
 | 1115 |  | 
 | 1116 |     DPRINTK(3, "rx skb: len = %d, truesize = %d\n", skb->len, skb->truesize); | 
 | 1117 |      | 
 | 1118 |     if (pdu_len < fore200e_vcc->rx_min_pdu) | 
 | 1119 | 	fore200e_vcc->rx_min_pdu = pdu_len; | 
 | 1120 |     if (pdu_len > fore200e_vcc->rx_max_pdu) | 
 | 1121 | 	fore200e_vcc->rx_max_pdu = pdu_len; | 
 | 1122 |     fore200e_vcc->rx_pdu++; | 
 | 1123 |  | 
 | 1124 |     /* push PDU */ | 
 | 1125 |     if (atm_charge(vcc, skb->truesize) == 0) { | 
 | 1126 |  | 
 | 1127 | 	DPRINTK(2, "receive buffers saturated for %d.%d.%d - PDU dropped\n", | 
 | 1128 | 		vcc->itf, vcc->vpi, vcc->vci); | 
 | 1129 |  | 
 | 1130 | 	dev_kfree_skb_any(skb); | 
 | 1131 |  | 
 | 1132 | 	atomic_inc(&vcc->stats->rx_drop); | 
 | 1133 | 	return -ENOMEM; | 
 | 1134 |     } | 
 | 1135 |  | 
 | 1136 |     vcc->push(vcc, skb); | 
 | 1137 |     atomic_inc(&vcc->stats->rx); | 
 | 1138 |  | 
 | 1139 |     return 0; | 
 | 1140 | } | 
 | 1141 |  | 
 | 1142 |  | 
 | 1143 | static void | 
 | 1144 | fore200e_collect_rpd(struct fore200e* fore200e, struct rpd* rpd) | 
 | 1145 | { | 
 | 1146 |     struct host_bsq* bsq; | 
 | 1147 |     struct buffer*   buffer; | 
 | 1148 |     int              i; | 
 | 1149 |      | 
 | 1150 |     for (i = 0; i < rpd->nseg; i++) { | 
 | 1151 |  | 
 | 1152 | 	/* rebuild rx buffer address from rsd handle */ | 
 | 1153 | 	buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle); | 
 | 1154 |  | 
 | 1155 | 	bsq = &fore200e->host_bsq[ buffer->scheme ][ buffer->magn ]; | 
 | 1156 |  | 
 | 1157 | #ifdef FORE200E_BSQ_DEBUG | 
 | 1158 | 	bsq_audit(2, bsq, buffer->scheme, buffer->magn); | 
 | 1159 |  | 
 | 1160 | 	if (buffer->supplied == 0) | 
 | 1161 | 	    printk(FORE200E "queue %d.%d, buffer %ld was not supplied\n", | 
 | 1162 | 		   buffer->scheme, buffer->magn, buffer->index); | 
 | 1163 | 	buffer->supplied = 0; | 
 | 1164 | #endif | 
 | 1165 |  | 
 | 1166 | 	/* re-insert the buffer into the free buffer list */ | 
 | 1167 | 	buffer->next = bsq->freebuf; | 
 | 1168 | 	bsq->freebuf = buffer; | 
 | 1169 |  | 
 | 1170 | 	/* then increment the number of free rx buffers */ | 
 | 1171 | 	bsq->freebuf_count++; | 
 | 1172 |     } | 
 | 1173 | } | 
 | 1174 |  | 
 | 1175 |  | 
 | 1176 | static void | 
 | 1177 | fore200e_rx_irq(struct fore200e* fore200e) | 
 | 1178 | { | 
 | 1179 |     struct host_rxq*        rxq = &fore200e->host_rxq; | 
 | 1180 |     struct host_rxq_entry*  entry; | 
 | 1181 |     struct atm_vcc*         vcc; | 
 | 1182 |     struct fore200e_vc_map* vc_map; | 
 | 1183 |  | 
 | 1184 |     for (;;) { | 
 | 1185 | 	 | 
 | 1186 | 	entry = &rxq->host_entry[ rxq->head ]; | 
 | 1187 |  | 
 | 1188 | 	/* no more received PDUs */ | 
 | 1189 | 	if ((*entry->status & STATUS_COMPLETE) == 0) | 
 | 1190 | 	    break; | 
 | 1191 |  | 
 | 1192 | 	vc_map = FORE200E_VC_MAP(fore200e, entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); | 
 | 1193 |  | 
 | 1194 | 	if ((vc_map->vcc == NULL) || | 
 | 1195 | 	    (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) { | 
 | 1196 |  | 
 | 1197 | 	    DPRINTK(1, "no ready VC found for PDU received on %d.%d.%d\n", | 
 | 1198 | 		    fore200e->atm_dev->number, | 
 | 1199 | 		    entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); | 
 | 1200 | 	} | 
 | 1201 | 	else { | 
 | 1202 | 	    vcc = vc_map->vcc; | 
 | 1203 | 	    ASSERT(vcc); | 
 | 1204 |  | 
 | 1205 | 	    if ((*entry->status & STATUS_ERROR) == 0) { | 
 | 1206 |  | 
 | 1207 | 		fore200e_push_rpd(fore200e, vcc, entry->rpd); | 
 | 1208 | 	    } | 
 | 1209 | 	    else { | 
 | 1210 | 		DPRINTK(2, "damaged PDU on %d.%d.%d\n", | 
 | 1211 | 			fore200e->atm_dev->number, | 
 | 1212 | 			entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); | 
 | 1213 | 		atomic_inc(&vcc->stats->rx_err); | 
 | 1214 | 	    } | 
 | 1215 | 	} | 
 | 1216 |  | 
 | 1217 | 	FORE200E_NEXT_ENTRY(rxq->head, QUEUE_SIZE_RX); | 
 | 1218 |  | 
 | 1219 | 	fore200e_collect_rpd(fore200e, entry->rpd); | 
 | 1220 |  | 
 | 1221 | 	/* rewrite the rpd address to ack the received PDU */ | 
 | 1222 | 	fore200e->bus->write(entry->rpd_dma, &entry->cp_entry->rpd_haddr); | 
 | 1223 | 	*entry->status = STATUS_FREE; | 
 | 1224 |  | 
 | 1225 | 	fore200e_supply(fore200e); | 
 | 1226 |     } | 
 | 1227 | } | 
 | 1228 |  | 
 | 1229 |  | 
 | 1230 | #ifndef FORE200E_USE_TASKLET | 
 | 1231 | static void | 
 | 1232 | fore200e_irq(struct fore200e* fore200e) | 
 | 1233 | { | 
 | 1234 |     unsigned long flags; | 
 | 1235 |  | 
 | 1236 |     spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 1237 |     fore200e_rx_irq(fore200e); | 
 | 1238 |     spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1239 |  | 
 | 1240 |     spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 1241 |     fore200e_tx_irq(fore200e); | 
 | 1242 |     spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1243 | } | 
 | 1244 | #endif | 
 | 1245 |  | 
 | 1246 |  | 
 | 1247 | static irqreturn_t | 
 | 1248 | fore200e_interrupt(int irq, void* dev) | 
 | 1249 | { | 
 | 1250 |     struct fore200e* fore200e = FORE200E_DEV((struct atm_dev*)dev); | 
 | 1251 |  | 
 | 1252 |     if (fore200e->bus->irq_check(fore200e) == 0) { | 
 | 1253 | 	 | 
 | 1254 | 	DPRINTK(3, "interrupt NOT triggered by device %d\n", fore200e->atm_dev->number); | 
 | 1255 | 	return IRQ_NONE; | 
 | 1256 |     } | 
 | 1257 |     DPRINTK(3, "interrupt triggered by device %d\n", fore200e->atm_dev->number); | 
 | 1258 |  | 
 | 1259 | #ifdef FORE200E_USE_TASKLET | 
 | 1260 |     tasklet_schedule(&fore200e->tx_tasklet); | 
 | 1261 |     tasklet_schedule(&fore200e->rx_tasklet); | 
 | 1262 | #else | 
 | 1263 |     fore200e_irq(fore200e); | 
 | 1264 | #endif | 
 | 1265 |      | 
 | 1266 |     fore200e->bus->irq_ack(fore200e); | 
 | 1267 |     return IRQ_HANDLED; | 
 | 1268 | } | 
 | 1269 |  | 
 | 1270 |  | 
 | 1271 | #ifdef FORE200E_USE_TASKLET | 
 | 1272 | static void | 
 | 1273 | fore200e_tx_tasklet(unsigned long data) | 
 | 1274 | { | 
 | 1275 |     struct fore200e* fore200e = (struct fore200e*) data; | 
 | 1276 |     unsigned long flags; | 
 | 1277 |  | 
 | 1278 |     DPRINTK(3, "tx tasklet scheduled for device %d\n", fore200e->atm_dev->number); | 
 | 1279 |  | 
 | 1280 |     spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 1281 |     fore200e_tx_irq(fore200e); | 
 | 1282 |     spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1283 | } | 
 | 1284 |  | 
 | 1285 |  | 
 | 1286 | static void | 
 | 1287 | fore200e_rx_tasklet(unsigned long data) | 
 | 1288 | { | 
 | 1289 |     struct fore200e* fore200e = (struct fore200e*) data; | 
 | 1290 |     unsigned long    flags; | 
 | 1291 |  | 
 | 1292 |     DPRINTK(3, "rx tasklet scheduled for device %d\n", fore200e->atm_dev->number); | 
 | 1293 |  | 
 | 1294 |     spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 1295 |     fore200e_rx_irq((struct fore200e*) data); | 
 | 1296 |     spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1297 | } | 
 | 1298 | #endif | 
 | 1299 |  | 
 | 1300 |  | 
 | 1301 | static int | 
 | 1302 | fore200e_select_scheme(struct atm_vcc* vcc) | 
 | 1303 | { | 
 | 1304 |     /* fairly balance the VCs over (identical) buffer schemes */ | 
 | 1305 |     int scheme = vcc->vci % 2 ? BUFFER_SCHEME_ONE : BUFFER_SCHEME_TWO; | 
 | 1306 |  | 
 | 1307 |     DPRINTK(1, "VC %d.%d.%d uses buffer scheme %d\n", | 
 | 1308 | 	    vcc->itf, vcc->vpi, vcc->vci, scheme); | 
 | 1309 |  | 
 | 1310 |     return scheme; | 
 | 1311 | } | 
 | 1312 |  | 
 | 1313 |  | 
 | 1314 | static int  | 
 | 1315 | fore200e_activate_vcin(struct fore200e* fore200e, int activate, struct atm_vcc* vcc, int mtu) | 
 | 1316 | { | 
 | 1317 |     struct host_cmdq*        cmdq  = &fore200e->host_cmdq; | 
 | 1318 |     struct host_cmdq_entry*  entry = &cmdq->host_entry[ cmdq->head ]; | 
 | 1319 |     struct activate_opcode   activ_opcode; | 
 | 1320 |     struct deactivate_opcode deactiv_opcode; | 
 | 1321 |     struct vpvc              vpvc; | 
 | 1322 |     int                      ok; | 
 | 1323 |     enum fore200e_aal        aal = fore200e_atm2fore_aal(vcc->qos.aal); | 
 | 1324 |  | 
 | 1325 |     FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
 | 1326 |      | 
 | 1327 |     if (activate) { | 
 | 1328 | 	FORE200E_VCC(vcc)->scheme = fore200e_select_scheme(vcc); | 
 | 1329 | 	 | 
 | 1330 | 	activ_opcode.opcode = OPCODE_ACTIVATE_VCIN; | 
 | 1331 | 	activ_opcode.aal    = aal; | 
 | 1332 | 	activ_opcode.scheme = FORE200E_VCC(vcc)->scheme; | 
 | 1333 | 	activ_opcode.pad    = 0; | 
 | 1334 |     } | 
 | 1335 |     else { | 
 | 1336 | 	deactiv_opcode.opcode = OPCODE_DEACTIVATE_VCIN; | 
 | 1337 | 	deactiv_opcode.pad    = 0; | 
 | 1338 |     } | 
 | 1339 |  | 
 | 1340 |     vpvc.vci = vcc->vci; | 
 | 1341 |     vpvc.vpi = vcc->vpi; | 
 | 1342 |  | 
 | 1343 |     *entry->status = STATUS_PENDING; | 
 | 1344 |  | 
 | 1345 |     if (activate) { | 
 | 1346 |  | 
 | 1347 | #ifdef FORE200E_52BYTE_AAL0_SDU | 
 | 1348 | 	mtu = 48; | 
 | 1349 | #endif | 
 | 1350 | 	/* the MTU is not used by the cp, except in the case of AAL0 */ | 
 | 1351 | 	fore200e->bus->write(mtu,                        &entry->cp_entry->cmd.activate_block.mtu); | 
 | 1352 | 	fore200e->bus->write(*(u32*)&vpvc,         (u32 __iomem *)&entry->cp_entry->cmd.activate_block.vpvc); | 
 | 1353 | 	fore200e->bus->write(*(u32*)&activ_opcode, (u32 __iomem *)&entry->cp_entry->cmd.activate_block.opcode); | 
 | 1354 |     } | 
 | 1355 |     else { | 
 | 1356 | 	fore200e->bus->write(*(u32*)&vpvc,         (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.vpvc); | 
 | 1357 | 	fore200e->bus->write(*(u32*)&deactiv_opcode, (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.opcode); | 
 | 1358 |     } | 
 | 1359 |  | 
 | 1360 |     ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
 | 1361 |  | 
 | 1362 |     *entry->status = STATUS_FREE; | 
 | 1363 |  | 
 | 1364 |     if (ok == 0) { | 
 | 1365 | 	printk(FORE200E "unable to %s VC %d.%d.%d\n", | 
 | 1366 | 	       activate ? "open" : "close", vcc->itf, vcc->vpi, vcc->vci); | 
 | 1367 | 	return -EIO; | 
 | 1368 |     } | 
 | 1369 |  | 
 | 1370 |     DPRINTK(1, "VC %d.%d.%d %sed\n", vcc->itf, vcc->vpi, vcc->vci,  | 
 | 1371 | 	    activate ? "open" : "clos"); | 
 | 1372 |  | 
 | 1373 |     return 0; | 
 | 1374 | } | 
 | 1375 |  | 
 | 1376 |  | 
 | 1377 | #define FORE200E_MAX_BACK2BACK_CELLS 255    /* XXX depends on CDVT */ | 
 | 1378 |  | 
 | 1379 | static void | 
 | 1380 | fore200e_rate_ctrl(struct atm_qos* qos, struct tpd_rate* rate) | 
 | 1381 | { | 
 | 1382 |     if (qos->txtp.max_pcr < ATM_OC3_PCR) { | 
 | 1383 |      | 
 | 1384 | 	/* compute the data cells to idle cells ratio from the tx PCR */ | 
 | 1385 | 	rate->data_cells = qos->txtp.max_pcr * FORE200E_MAX_BACK2BACK_CELLS / ATM_OC3_PCR; | 
 | 1386 | 	rate->idle_cells = FORE200E_MAX_BACK2BACK_CELLS - rate->data_cells; | 
 | 1387 |     } | 
 | 1388 |     else { | 
 | 1389 | 	/* disable rate control */ | 
 | 1390 | 	rate->data_cells = rate->idle_cells = 0; | 
 | 1391 |     } | 
 | 1392 | } | 
 | 1393 |  | 
 | 1394 |  | 
 | 1395 | static int | 
 | 1396 | fore200e_open(struct atm_vcc *vcc) | 
 | 1397 | { | 
 | 1398 |     struct fore200e*        fore200e = FORE200E_DEV(vcc->dev); | 
 | 1399 |     struct fore200e_vcc*    fore200e_vcc; | 
 | 1400 |     struct fore200e_vc_map* vc_map; | 
 | 1401 |     unsigned long	    flags; | 
 | 1402 |     int			    vci = vcc->vci; | 
 | 1403 |     short		    vpi = vcc->vpi; | 
 | 1404 |  | 
 | 1405 |     ASSERT((vpi >= 0) && (vpi < 1<<FORE200E_VPI_BITS)); | 
 | 1406 |     ASSERT((vci >= 0) && (vci < 1<<FORE200E_VCI_BITS)); | 
 | 1407 |  | 
 | 1408 |     spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 1409 |  | 
 | 1410 |     vc_map = FORE200E_VC_MAP(fore200e, vpi, vci); | 
 | 1411 |     if (vc_map->vcc) { | 
 | 1412 |  | 
 | 1413 | 	spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1414 |  | 
 | 1415 | 	printk(FORE200E "VC %d.%d.%d already in use\n", | 
 | 1416 | 	       fore200e->atm_dev->number, vpi, vci); | 
 | 1417 |  | 
 | 1418 | 	return -EINVAL; | 
 | 1419 |     } | 
 | 1420 |  | 
 | 1421 |     vc_map->vcc = vcc; | 
 | 1422 |  | 
 | 1423 |     spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1424 |  | 
 | 1425 |     fore200e_vcc = kzalloc(sizeof(struct fore200e_vcc), GFP_ATOMIC); | 
 | 1426 |     if (fore200e_vcc == NULL) { | 
 | 1427 | 	vc_map->vcc = NULL; | 
 | 1428 | 	return -ENOMEM; | 
 | 1429 |     } | 
 | 1430 |  | 
 | 1431 |     DPRINTK(2, "opening %d.%d.%d:%d QoS = (tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; " | 
 | 1432 | 	    "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d)\n", | 
 | 1433 | 	    vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
 | 1434 | 	    fore200e_traffic_class[ vcc->qos.txtp.traffic_class ], | 
 | 1435 | 	    vcc->qos.txtp.min_pcr, vcc->qos.txtp.max_pcr, vcc->qos.txtp.max_cdv, vcc->qos.txtp.max_sdu, | 
 | 1436 | 	    fore200e_traffic_class[ vcc->qos.rxtp.traffic_class ], | 
 | 1437 | 	    vcc->qos.rxtp.min_pcr, vcc->qos.rxtp.max_pcr, vcc->qos.rxtp.max_cdv, vcc->qos.rxtp.max_sdu); | 
 | 1438 |      | 
 | 1439 |     /* pseudo-CBR bandwidth requested? */ | 
 | 1440 |     if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { | 
 | 1441 | 	 | 
 | 1442 | 	mutex_lock(&fore200e->rate_mtx); | 
 | 1443 | 	if (fore200e->available_cell_rate < vcc->qos.txtp.max_pcr) { | 
 | 1444 | 	    mutex_unlock(&fore200e->rate_mtx); | 
 | 1445 |  | 
 | 1446 | 	    kfree(fore200e_vcc); | 
 | 1447 | 	    vc_map->vcc = NULL; | 
 | 1448 | 	    return -EAGAIN; | 
 | 1449 | 	} | 
 | 1450 |  | 
 | 1451 | 	/* reserve bandwidth */ | 
 | 1452 | 	fore200e->available_cell_rate -= vcc->qos.txtp.max_pcr; | 
 | 1453 | 	mutex_unlock(&fore200e->rate_mtx); | 
 | 1454 |     } | 
 | 1455 |      | 
 | 1456 |     vcc->itf = vcc->dev->number; | 
 | 1457 |  | 
 | 1458 |     set_bit(ATM_VF_PARTIAL,&vcc->flags); | 
 | 1459 |     set_bit(ATM_VF_ADDR, &vcc->flags); | 
 | 1460 |  | 
 | 1461 |     vcc->dev_data = fore200e_vcc; | 
 | 1462 |      | 
 | 1463 |     if (fore200e_activate_vcin(fore200e, 1, vcc, vcc->qos.rxtp.max_sdu) < 0) { | 
 | 1464 |  | 
 | 1465 | 	vc_map->vcc = NULL; | 
 | 1466 |  | 
 | 1467 | 	clear_bit(ATM_VF_ADDR, &vcc->flags); | 
 | 1468 | 	clear_bit(ATM_VF_PARTIAL,&vcc->flags); | 
 | 1469 |  | 
 | 1470 | 	vcc->dev_data = NULL; | 
 | 1471 |  | 
 | 1472 | 	fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; | 
 | 1473 |  | 
 | 1474 | 	kfree(fore200e_vcc); | 
 | 1475 | 	return -EINVAL; | 
 | 1476 |     } | 
 | 1477 |      | 
 | 1478 |     /* compute rate control parameters */ | 
 | 1479 |     if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { | 
 | 1480 | 	 | 
 | 1481 | 	fore200e_rate_ctrl(&vcc->qos, &fore200e_vcc->rate); | 
 | 1482 | 	set_bit(ATM_VF_HASQOS, &vcc->flags); | 
 | 1483 |  | 
 | 1484 | 	DPRINTK(3, "tx on %d.%d.%d:%d, tx PCR = %d, rx PCR = %d, data_cells = %u, idle_cells = %u\n", | 
 | 1485 | 		vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
 | 1486 | 		vcc->qos.txtp.max_pcr, vcc->qos.rxtp.max_pcr,  | 
 | 1487 | 		fore200e_vcc->rate.data_cells, fore200e_vcc->rate.idle_cells); | 
 | 1488 |     } | 
 | 1489 |      | 
 | 1490 |     fore200e_vcc->tx_min_pdu = fore200e_vcc->rx_min_pdu = MAX_PDU_SIZE + 1; | 
 | 1491 |     fore200e_vcc->tx_max_pdu = fore200e_vcc->rx_max_pdu = 0; | 
 | 1492 |     fore200e_vcc->tx_pdu     = fore200e_vcc->rx_pdu     = 0; | 
 | 1493 |  | 
 | 1494 |     /* new incarnation of the vcc */ | 
 | 1495 |     vc_map->incarn = ++fore200e->incarn_count; | 
 | 1496 |  | 
 | 1497 |     /* VC unusable before this flag is set */ | 
 | 1498 |     set_bit(ATM_VF_READY, &vcc->flags); | 
 | 1499 |  | 
 | 1500 |     return 0; | 
 | 1501 | } | 
 | 1502 |  | 
 | 1503 |  | 
 | 1504 | static void | 
 | 1505 | fore200e_close(struct atm_vcc* vcc) | 
 | 1506 | { | 
 | 1507 |     struct fore200e*        fore200e = FORE200E_DEV(vcc->dev); | 
 | 1508 |     struct fore200e_vcc*    fore200e_vcc; | 
 | 1509 |     struct fore200e_vc_map* vc_map; | 
 | 1510 |     unsigned long           flags; | 
 | 1511 |  | 
 | 1512 |     ASSERT(vcc); | 
 | 1513 |     ASSERT((vcc->vpi >= 0) && (vcc->vpi < 1<<FORE200E_VPI_BITS)); | 
 | 1514 |     ASSERT((vcc->vci >= 0) && (vcc->vci < 1<<FORE200E_VCI_BITS)); | 
 | 1515 |  | 
 | 1516 |     DPRINTK(2, "closing %d.%d.%d:%d\n", vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal)); | 
 | 1517 |  | 
 | 1518 |     clear_bit(ATM_VF_READY, &vcc->flags); | 
 | 1519 |  | 
 | 1520 |     fore200e_activate_vcin(fore200e, 0, vcc, 0); | 
 | 1521 |  | 
 | 1522 |     spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 1523 |  | 
 | 1524 |     vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci); | 
 | 1525 |  | 
 | 1526 |     /* the vc is no longer considered as "in use" by fore200e_open() */ | 
 | 1527 |     vc_map->vcc = NULL; | 
 | 1528 |  | 
 | 1529 |     vcc->itf = vcc->vci = vcc->vpi = 0; | 
 | 1530 |  | 
 | 1531 |     fore200e_vcc = FORE200E_VCC(vcc); | 
 | 1532 |     vcc->dev_data = NULL; | 
 | 1533 |  | 
 | 1534 |     spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1535 |  | 
 | 1536 |     /* release reserved bandwidth, if any */ | 
 | 1537 |     if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { | 
 | 1538 |  | 
 | 1539 | 	mutex_lock(&fore200e->rate_mtx); | 
 | 1540 | 	fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; | 
 | 1541 | 	mutex_unlock(&fore200e->rate_mtx); | 
 | 1542 |  | 
 | 1543 | 	clear_bit(ATM_VF_HASQOS, &vcc->flags); | 
 | 1544 |     } | 
 | 1545 |  | 
 | 1546 |     clear_bit(ATM_VF_ADDR, &vcc->flags); | 
 | 1547 |     clear_bit(ATM_VF_PARTIAL,&vcc->flags); | 
 | 1548 |  | 
 | 1549 |     ASSERT(fore200e_vcc); | 
 | 1550 |     kfree(fore200e_vcc); | 
 | 1551 | } | 
 | 1552 |  | 
 | 1553 |  | 
 | 1554 | static int | 
 | 1555 | fore200e_send(struct atm_vcc *vcc, struct sk_buff *skb) | 
 | 1556 | { | 
 | 1557 |     struct fore200e*        fore200e     = FORE200E_DEV(vcc->dev); | 
 | 1558 |     struct fore200e_vcc*    fore200e_vcc = FORE200E_VCC(vcc); | 
 | 1559 |     struct fore200e_vc_map* vc_map; | 
 | 1560 |     struct host_txq*        txq          = &fore200e->host_txq; | 
 | 1561 |     struct host_txq_entry*  entry; | 
 | 1562 |     struct tpd*             tpd; | 
 | 1563 |     struct tpd_haddr        tpd_haddr; | 
 | 1564 |     int                     retry        = CONFIG_ATM_FORE200E_TX_RETRY; | 
 | 1565 |     int                     tx_copy      = 0; | 
 | 1566 |     int                     tx_len       = skb->len; | 
 | 1567 |     u32*                    cell_header  = NULL; | 
 | 1568 |     unsigned char*          skb_data; | 
 | 1569 |     int                     skb_len; | 
 | 1570 |     unsigned char*          data; | 
 | 1571 |     unsigned long           flags; | 
 | 1572 |  | 
 | 1573 |     ASSERT(vcc); | 
 | 1574 |     ASSERT(fore200e); | 
 | 1575 |     ASSERT(fore200e_vcc); | 
 | 1576 |  | 
 | 1577 |     if (!test_bit(ATM_VF_READY, &vcc->flags)) { | 
 | 1578 | 	DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi); | 
 | 1579 | 	dev_kfree_skb_any(skb); | 
 | 1580 | 	return -EINVAL; | 
 | 1581 |     } | 
 | 1582 |  | 
 | 1583 | #ifdef FORE200E_52BYTE_AAL0_SDU | 
 | 1584 |     if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.txtp.max_sdu == ATM_AAL0_SDU)) { | 
 | 1585 | 	cell_header = (u32*) skb->data; | 
 | 1586 | 	skb_data    = skb->data + 4;    /* skip 4-byte cell header */ | 
 | 1587 | 	skb_len     = tx_len = skb->len  - 4; | 
 | 1588 |  | 
 | 1589 | 	DPRINTK(3, "user-supplied cell header = 0x%08x\n", *cell_header); | 
 | 1590 |     } | 
 | 1591 |     else  | 
 | 1592 | #endif | 
 | 1593 |     { | 
 | 1594 | 	skb_data = skb->data; | 
 | 1595 | 	skb_len  = skb->len; | 
 | 1596 |     } | 
 | 1597 |      | 
 | 1598 |     if (((unsigned long)skb_data) & 0x3) { | 
 | 1599 |  | 
 | 1600 | 	DPRINTK(2, "misaligned tx PDU on device %s\n", fore200e->name); | 
 | 1601 | 	tx_copy = 1; | 
 | 1602 | 	tx_len  = skb_len; | 
 | 1603 |     } | 
 | 1604 |  | 
 | 1605 |     if ((vcc->qos.aal == ATM_AAL0) && (skb_len % ATM_CELL_PAYLOAD)) { | 
 | 1606 |  | 
 | 1607 |         /* this simply NUKES the PCA board */ | 
 | 1608 | 	DPRINTK(2, "incomplete tx AAL0 PDU on device %s\n", fore200e->name); | 
 | 1609 | 	tx_copy = 1; | 
 | 1610 | 	tx_len  = ((skb_len / ATM_CELL_PAYLOAD) + 1) * ATM_CELL_PAYLOAD; | 
 | 1611 |     } | 
 | 1612 |      | 
 | 1613 |     if (tx_copy) { | 
 | 1614 | 	data = kmalloc(tx_len, GFP_ATOMIC | GFP_DMA); | 
 | 1615 | 	if (data == NULL) { | 
 | 1616 | 	    if (vcc->pop) { | 
 | 1617 | 		vcc->pop(vcc, skb); | 
 | 1618 | 	    } | 
 | 1619 | 	    else { | 
 | 1620 | 		dev_kfree_skb_any(skb); | 
 | 1621 | 	    } | 
 | 1622 | 	    return -ENOMEM; | 
 | 1623 | 	} | 
 | 1624 |  | 
 | 1625 | 	memcpy(data, skb_data, skb_len); | 
 | 1626 | 	if (skb_len < tx_len) | 
 | 1627 | 	    memset(data + skb_len, 0x00, tx_len - skb_len); | 
 | 1628 |     } | 
 | 1629 |     else { | 
 | 1630 | 	data = skb_data; | 
 | 1631 |     } | 
 | 1632 |  | 
 | 1633 |     vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci); | 
 | 1634 |     ASSERT(vc_map->vcc == vcc); | 
 | 1635 |  | 
 | 1636 |   retry_here: | 
 | 1637 |  | 
 | 1638 |     spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 1639 |  | 
 | 1640 |     entry = &txq->host_entry[ txq->head ]; | 
 | 1641 |  | 
 | 1642 |     if ((*entry->status != STATUS_FREE) || (txq->txing >= QUEUE_SIZE_TX - 2)) { | 
 | 1643 |  | 
 | 1644 | 	/* try to free completed tx queue entries */ | 
 | 1645 | 	fore200e_tx_irq(fore200e); | 
 | 1646 |  | 
 | 1647 | 	if (*entry->status != STATUS_FREE) { | 
 | 1648 |  | 
 | 1649 | 	    spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1650 |  | 
 | 1651 | 	    /* retry once again? */ | 
 | 1652 | 	    if (--retry > 0) { | 
 | 1653 | 		udelay(50); | 
 | 1654 | 		goto retry_here; | 
 | 1655 | 	    } | 
 | 1656 |  | 
 | 1657 | 	    atomic_inc(&vcc->stats->tx_err); | 
 | 1658 |  | 
 | 1659 | 	    fore200e->tx_sat++; | 
 | 1660 | 	    DPRINTK(2, "tx queue of device %s is saturated, PDU dropped - heartbeat is %08x\n", | 
 | 1661 | 		    fore200e->name, fore200e->cp_queues->heartbeat); | 
 | 1662 | 	    if (vcc->pop) { | 
 | 1663 | 		vcc->pop(vcc, skb); | 
 | 1664 | 	    } | 
 | 1665 | 	    else { | 
 | 1666 | 		dev_kfree_skb_any(skb); | 
 | 1667 | 	    } | 
 | 1668 |  | 
 | 1669 | 	    if (tx_copy) | 
 | 1670 | 		kfree(data); | 
 | 1671 |  | 
 | 1672 | 	    return -ENOBUFS; | 
 | 1673 | 	} | 
 | 1674 |     } | 
 | 1675 |  | 
 | 1676 |     entry->incarn = vc_map->incarn; | 
 | 1677 |     entry->vc_map = vc_map; | 
 | 1678 |     entry->skb    = skb; | 
 | 1679 |     entry->data   = tx_copy ? data : NULL; | 
 | 1680 |  | 
 | 1681 |     tpd = entry->tpd; | 
 | 1682 |     tpd->tsd[ 0 ].buffer = fore200e->bus->dma_map(fore200e, data, tx_len, DMA_TO_DEVICE); | 
 | 1683 |     tpd->tsd[ 0 ].length = tx_len; | 
 | 1684 |  | 
 | 1685 |     FORE200E_NEXT_ENTRY(txq->head, QUEUE_SIZE_TX); | 
 | 1686 |     txq->txing++; | 
 | 1687 |  | 
 | 1688 |     /* The dma_map call above implies a dma_sync so the device can use it, | 
 | 1689 |      * thus no explicit dma_sync call is necessary here. | 
 | 1690 |      */ | 
 | 1691 |      | 
 | 1692 |     DPRINTK(3, "tx on %d.%d.%d:%d, len = %u (%u)\n",  | 
 | 1693 | 	    vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
 | 1694 | 	    tpd->tsd[0].length, skb_len); | 
 | 1695 |  | 
 | 1696 |     if (skb_len < fore200e_vcc->tx_min_pdu) | 
 | 1697 | 	fore200e_vcc->tx_min_pdu = skb_len; | 
 | 1698 |     if (skb_len > fore200e_vcc->tx_max_pdu) | 
 | 1699 | 	fore200e_vcc->tx_max_pdu = skb_len; | 
 | 1700 |     fore200e_vcc->tx_pdu++; | 
 | 1701 |  | 
 | 1702 |     /* set tx rate control information */ | 
 | 1703 |     tpd->rate.data_cells = fore200e_vcc->rate.data_cells; | 
 | 1704 |     tpd->rate.idle_cells = fore200e_vcc->rate.idle_cells; | 
 | 1705 |  | 
 | 1706 |     if (cell_header) { | 
 | 1707 | 	tpd->atm_header.clp = (*cell_header & ATM_HDR_CLP); | 
 | 1708 | 	tpd->atm_header.plt = (*cell_header & ATM_HDR_PTI_MASK) >> ATM_HDR_PTI_SHIFT; | 
 | 1709 | 	tpd->atm_header.vci = (*cell_header & ATM_HDR_VCI_MASK) >> ATM_HDR_VCI_SHIFT; | 
 | 1710 | 	tpd->atm_header.vpi = (*cell_header & ATM_HDR_VPI_MASK) >> ATM_HDR_VPI_SHIFT; | 
 | 1711 | 	tpd->atm_header.gfc = (*cell_header & ATM_HDR_GFC_MASK) >> ATM_HDR_GFC_SHIFT; | 
 | 1712 |     } | 
 | 1713 |     else { | 
 | 1714 | 	/* set the ATM header, common to all cells conveying the PDU */ | 
 | 1715 | 	tpd->atm_header.clp = 0; | 
 | 1716 | 	tpd->atm_header.plt = 0; | 
 | 1717 | 	tpd->atm_header.vci = vcc->vci; | 
 | 1718 | 	tpd->atm_header.vpi = vcc->vpi; | 
 | 1719 | 	tpd->atm_header.gfc = 0; | 
 | 1720 |     } | 
 | 1721 |  | 
 | 1722 |     tpd->spec.length = tx_len; | 
 | 1723 |     tpd->spec.nseg   = 1; | 
 | 1724 |     tpd->spec.aal    = fore200e_atm2fore_aal(vcc->qos.aal); | 
 | 1725 |     tpd->spec.intr   = 1; | 
 | 1726 |  | 
 | 1727 |     tpd_haddr.size  = sizeof(struct tpd) / (1<<TPD_HADDR_SHIFT);  /* size is expressed in 32 byte blocks */ | 
 | 1728 |     tpd_haddr.pad   = 0; | 
 | 1729 |     tpd_haddr.haddr = entry->tpd_dma >> TPD_HADDR_SHIFT;          /* shift the address, as we are in a bitfield */ | 
 | 1730 |  | 
 | 1731 |     *entry->status = STATUS_PENDING; | 
 | 1732 |     fore200e->bus->write(*(u32*)&tpd_haddr, (u32 __iomem *)&entry->cp_entry->tpd_haddr); | 
 | 1733 |  | 
 | 1734 |     spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 1735 |  | 
 | 1736 |     return 0; | 
 | 1737 | } | 
 | 1738 |  | 
 | 1739 |  | 
 | 1740 | static int | 
 | 1741 | fore200e_getstats(struct fore200e* fore200e) | 
 | 1742 | { | 
 | 1743 |     struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
 | 1744 |     struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
 | 1745 |     struct stats_opcode     opcode; | 
 | 1746 |     int                     ok; | 
 | 1747 |     u32                     stats_dma_addr; | 
 | 1748 |  | 
 | 1749 |     if (fore200e->stats == NULL) { | 
 | 1750 | 	fore200e->stats = kzalloc(sizeof(struct stats), GFP_KERNEL | GFP_DMA); | 
 | 1751 | 	if (fore200e->stats == NULL) | 
 | 1752 | 	    return -ENOMEM; | 
 | 1753 |     } | 
 | 1754 |      | 
 | 1755 |     stats_dma_addr = fore200e->bus->dma_map(fore200e, fore200e->stats, | 
 | 1756 | 					    sizeof(struct stats), DMA_FROM_DEVICE); | 
 | 1757 |      | 
 | 1758 |     FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
 | 1759 |  | 
 | 1760 |     opcode.opcode = OPCODE_GET_STATS; | 
 | 1761 |     opcode.pad    = 0; | 
 | 1762 |  | 
 | 1763 |     fore200e->bus->write(stats_dma_addr, &entry->cp_entry->cmd.stats_block.stats_haddr); | 
 | 1764 |      | 
 | 1765 |     *entry->status = STATUS_PENDING; | 
 | 1766 |  | 
 | 1767 |     fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.stats_block.opcode); | 
 | 1768 |  | 
 | 1769 |     ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
 | 1770 |  | 
 | 1771 |     *entry->status = STATUS_FREE; | 
 | 1772 |  | 
 | 1773 |     fore200e->bus->dma_unmap(fore200e, stats_dma_addr, sizeof(struct stats), DMA_FROM_DEVICE); | 
 | 1774 |      | 
 | 1775 |     if (ok == 0) { | 
 | 1776 | 	printk(FORE200E "unable to get statistics from device %s\n", fore200e->name); | 
 | 1777 | 	return -EIO; | 
 | 1778 |     } | 
 | 1779 |  | 
 | 1780 |     return 0; | 
 | 1781 | } | 
 | 1782 |  | 
 | 1783 |  | 
 | 1784 | static int | 
 | 1785 | fore200e_getsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen) | 
 | 1786 | { | 
 | 1787 |     /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */ | 
 | 1788 |  | 
 | 1789 |     DPRINTK(2, "getsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n", | 
 | 1790 | 	    vcc->itf, vcc->vpi, vcc->vci, level, optname, optval, optlen); | 
 | 1791 |  | 
 | 1792 |     return -EINVAL; | 
 | 1793 | } | 
 | 1794 |  | 
 | 1795 |  | 
 | 1796 | static int | 
 | 1797 | fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, unsigned int optlen) | 
 | 1798 | { | 
 | 1799 |     /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */ | 
 | 1800 |      | 
 | 1801 |     DPRINTK(2, "setsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n", | 
 | 1802 | 	    vcc->itf, vcc->vpi, vcc->vci, level, optname, optval, optlen); | 
 | 1803 |      | 
 | 1804 |     return -EINVAL; | 
 | 1805 | } | 
 | 1806 |  | 
 | 1807 |  | 
 | 1808 | #if 0 /* currently unused */ | 
 | 1809 | static int | 
 | 1810 | fore200e_get_oc3(struct fore200e* fore200e, struct oc3_regs* regs) | 
 | 1811 | { | 
 | 1812 |     struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
 | 1813 |     struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
 | 1814 |     struct oc3_opcode       opcode; | 
 | 1815 |     int                     ok; | 
 | 1816 |     u32                     oc3_regs_dma_addr; | 
 | 1817 |  | 
 | 1818 |     oc3_regs_dma_addr = fore200e->bus->dma_map(fore200e, regs, sizeof(struct oc3_regs), DMA_FROM_DEVICE); | 
 | 1819 |  | 
 | 1820 |     FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
 | 1821 |  | 
 | 1822 |     opcode.opcode = OPCODE_GET_OC3; | 
 | 1823 |     opcode.reg    = 0; | 
 | 1824 |     opcode.value  = 0; | 
 | 1825 |     opcode.mask   = 0; | 
 | 1826 |  | 
 | 1827 |     fore200e->bus->write(oc3_regs_dma_addr, &entry->cp_entry->cmd.oc3_block.regs_haddr); | 
 | 1828 |      | 
 | 1829 |     *entry->status = STATUS_PENDING; | 
 | 1830 |  | 
 | 1831 |     fore200e->bus->write(*(u32*)&opcode, (u32*)&entry->cp_entry->cmd.oc3_block.opcode); | 
 | 1832 |  | 
 | 1833 |     ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
 | 1834 |  | 
 | 1835 |     *entry->status = STATUS_FREE; | 
 | 1836 |  | 
 | 1837 |     fore200e->bus->dma_unmap(fore200e, oc3_regs_dma_addr, sizeof(struct oc3_regs), DMA_FROM_DEVICE); | 
 | 1838 |      | 
 | 1839 |     if (ok == 0) { | 
 | 1840 | 	printk(FORE200E "unable to get OC-3 regs of device %s\n", fore200e->name); | 
 | 1841 | 	return -EIO; | 
 | 1842 |     } | 
 | 1843 |  | 
 | 1844 |     return 0; | 
 | 1845 | } | 
 | 1846 | #endif | 
 | 1847 |  | 
 | 1848 |  | 
 | 1849 | static int | 
 | 1850 | fore200e_set_oc3(struct fore200e* fore200e, u32 reg, u32 value, u32 mask) | 
 | 1851 | { | 
 | 1852 |     struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
 | 1853 |     struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
 | 1854 |     struct oc3_opcode       opcode; | 
 | 1855 |     int                     ok; | 
 | 1856 |  | 
 | 1857 |     DPRINTK(2, "set OC-3 reg = 0x%02x, value = 0x%02x, mask = 0x%02x\n", reg, value, mask); | 
 | 1858 |  | 
 | 1859 |     FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
 | 1860 |  | 
 | 1861 |     opcode.opcode = OPCODE_SET_OC3; | 
 | 1862 |     opcode.reg    = reg; | 
 | 1863 |     opcode.value  = value; | 
 | 1864 |     opcode.mask   = mask; | 
 | 1865 |  | 
 | 1866 |     fore200e->bus->write(0, &entry->cp_entry->cmd.oc3_block.regs_haddr); | 
 | 1867 |      | 
 | 1868 |     *entry->status = STATUS_PENDING; | 
 | 1869 |  | 
 | 1870 |     fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.oc3_block.opcode); | 
 | 1871 |  | 
 | 1872 |     ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
 | 1873 |  | 
 | 1874 |     *entry->status = STATUS_FREE; | 
 | 1875 |  | 
 | 1876 |     if (ok == 0) { | 
 | 1877 | 	printk(FORE200E "unable to set OC-3 reg 0x%02x of device %s\n", reg, fore200e->name); | 
 | 1878 | 	return -EIO; | 
 | 1879 |     } | 
 | 1880 |  | 
 | 1881 |     return 0; | 
 | 1882 | } | 
 | 1883 |  | 
 | 1884 |  | 
 | 1885 | static int | 
 | 1886 | fore200e_setloop(struct fore200e* fore200e, int loop_mode) | 
 | 1887 | { | 
 | 1888 |     u32 mct_value, mct_mask; | 
 | 1889 |     int error; | 
 | 1890 |  | 
 | 1891 |     if (!capable(CAP_NET_ADMIN)) | 
 | 1892 | 	return -EPERM; | 
 | 1893 |      | 
 | 1894 |     switch (loop_mode) { | 
 | 1895 |  | 
 | 1896 |     case ATM_LM_NONE: | 
 | 1897 | 	mct_value = 0;  | 
 | 1898 | 	mct_mask  = SUNI_MCT_DLE | SUNI_MCT_LLE; | 
 | 1899 | 	break; | 
 | 1900 | 	 | 
 | 1901 |     case ATM_LM_LOC_PHY: | 
 | 1902 | 	mct_value = mct_mask = SUNI_MCT_DLE; | 
 | 1903 | 	break; | 
 | 1904 |  | 
 | 1905 |     case ATM_LM_RMT_PHY: | 
 | 1906 | 	mct_value = mct_mask = SUNI_MCT_LLE; | 
 | 1907 | 	break; | 
 | 1908 |  | 
 | 1909 |     default: | 
 | 1910 | 	return -EINVAL; | 
 | 1911 |     } | 
 | 1912 |  | 
 | 1913 |     error = fore200e_set_oc3(fore200e, SUNI_MCT, mct_value, mct_mask); | 
 | 1914 |     if (error == 0) | 
 | 1915 | 	fore200e->loop_mode = loop_mode; | 
 | 1916 |  | 
 | 1917 |     return error; | 
 | 1918 | } | 
 | 1919 |  | 
 | 1920 |  | 
 | 1921 | static int | 
 | 1922 | fore200e_fetch_stats(struct fore200e* fore200e, struct sonet_stats __user *arg) | 
 | 1923 | { | 
 | 1924 |     struct sonet_stats tmp; | 
 | 1925 |  | 
 | 1926 |     if (fore200e_getstats(fore200e) < 0) | 
 | 1927 | 	return -EIO; | 
 | 1928 |  | 
 | 1929 |     tmp.section_bip = be32_to_cpu(fore200e->stats->oc3.section_bip8_errors); | 
 | 1930 |     tmp.line_bip    = be32_to_cpu(fore200e->stats->oc3.line_bip24_errors); | 
 | 1931 |     tmp.path_bip    = be32_to_cpu(fore200e->stats->oc3.path_bip8_errors); | 
 | 1932 |     tmp.line_febe   = be32_to_cpu(fore200e->stats->oc3.line_febe_errors); | 
 | 1933 |     tmp.path_febe   = be32_to_cpu(fore200e->stats->oc3.path_febe_errors); | 
 | 1934 |     tmp.corr_hcs    = be32_to_cpu(fore200e->stats->oc3.corr_hcs_errors); | 
 | 1935 |     tmp.uncorr_hcs  = be32_to_cpu(fore200e->stats->oc3.ucorr_hcs_errors); | 
 | 1936 |     tmp.tx_cells    = be32_to_cpu(fore200e->stats->aal0.cells_transmitted)  + | 
 | 1937 | 	              be32_to_cpu(fore200e->stats->aal34.cells_transmitted) + | 
 | 1938 | 	              be32_to_cpu(fore200e->stats->aal5.cells_transmitted); | 
 | 1939 |     tmp.rx_cells    = be32_to_cpu(fore200e->stats->aal0.cells_received)     + | 
 | 1940 | 	              be32_to_cpu(fore200e->stats->aal34.cells_received)    + | 
 | 1941 | 	              be32_to_cpu(fore200e->stats->aal5.cells_received); | 
 | 1942 |  | 
 | 1943 |     if (arg) | 
 | 1944 | 	return copy_to_user(arg, &tmp, sizeof(struct sonet_stats)) ? -EFAULT : 0;	 | 
 | 1945 |      | 
 | 1946 |     return 0; | 
 | 1947 | } | 
 | 1948 |  | 
 | 1949 |  | 
 | 1950 | static int | 
 | 1951 | fore200e_ioctl(struct atm_dev* dev, unsigned int cmd, void __user * arg) | 
 | 1952 | { | 
 | 1953 |     struct fore200e* fore200e = FORE200E_DEV(dev); | 
 | 1954 |      | 
 | 1955 |     DPRINTK(2, "ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg); | 
 | 1956 |  | 
 | 1957 |     switch (cmd) { | 
 | 1958 |  | 
 | 1959 |     case SONET_GETSTAT: | 
 | 1960 | 	return fore200e_fetch_stats(fore200e, (struct sonet_stats __user *)arg); | 
 | 1961 |  | 
 | 1962 |     case SONET_GETDIAG: | 
 | 1963 | 	return put_user(0, (int __user *)arg) ? -EFAULT : 0; | 
 | 1964 |  | 
 | 1965 |     case ATM_SETLOOP: | 
 | 1966 | 	return fore200e_setloop(fore200e, (int)(unsigned long)arg); | 
 | 1967 |  | 
 | 1968 |     case ATM_GETLOOP: | 
 | 1969 | 	return put_user(fore200e->loop_mode, (int __user *)arg) ? -EFAULT : 0; | 
 | 1970 |  | 
 | 1971 |     case ATM_QUERYLOOP: | 
 | 1972 | 	return put_user(ATM_LM_LOC_PHY | ATM_LM_RMT_PHY, (int __user *)arg) ? -EFAULT : 0; | 
 | 1973 |     } | 
 | 1974 |  | 
 | 1975 |     return -ENOSYS; /* not implemented */ | 
 | 1976 | } | 
 | 1977 |  | 
 | 1978 |  | 
 | 1979 | static int | 
 | 1980 | fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags) | 
 | 1981 | { | 
 | 1982 |     struct fore200e_vcc* fore200e_vcc = FORE200E_VCC(vcc); | 
 | 1983 |     struct fore200e*     fore200e     = FORE200E_DEV(vcc->dev); | 
 | 1984 |  | 
 | 1985 |     if (!test_bit(ATM_VF_READY, &vcc->flags)) { | 
 | 1986 | 	DPRINTK(1, "VC %d.%d.%d not ready for QoS change\n", vcc->itf, vcc->vpi, vcc->vpi); | 
 | 1987 | 	return -EINVAL; | 
 | 1988 |     } | 
 | 1989 |  | 
 | 1990 |     DPRINTK(2, "change_qos %d.%d.%d, " | 
 | 1991 | 	    "(tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; " | 
 | 1992 | 	    "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d), flags = 0x%x\n" | 
 | 1993 | 	    "available_cell_rate = %u", | 
 | 1994 | 	    vcc->itf, vcc->vpi, vcc->vci, | 
 | 1995 | 	    fore200e_traffic_class[ qos->txtp.traffic_class ], | 
 | 1996 | 	    qos->txtp.min_pcr, qos->txtp.max_pcr, qos->txtp.max_cdv, qos->txtp.max_sdu, | 
 | 1997 | 	    fore200e_traffic_class[ qos->rxtp.traffic_class ], | 
 | 1998 | 	    qos->rxtp.min_pcr, qos->rxtp.max_pcr, qos->rxtp.max_cdv, qos->rxtp.max_sdu, | 
 | 1999 | 	    flags, fore200e->available_cell_rate); | 
 | 2000 |  | 
 | 2001 |     if ((qos->txtp.traffic_class == ATM_CBR) && (qos->txtp.max_pcr > 0)) { | 
 | 2002 |  | 
 | 2003 | 	mutex_lock(&fore200e->rate_mtx); | 
 | 2004 | 	if (fore200e->available_cell_rate + vcc->qos.txtp.max_pcr < qos->txtp.max_pcr) { | 
 | 2005 | 	    mutex_unlock(&fore200e->rate_mtx); | 
 | 2006 | 	    return -EAGAIN; | 
 | 2007 | 	} | 
 | 2008 |  | 
 | 2009 | 	fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; | 
 | 2010 | 	fore200e->available_cell_rate -= qos->txtp.max_pcr; | 
 | 2011 |  | 
 | 2012 | 	mutex_unlock(&fore200e->rate_mtx); | 
 | 2013 | 	 | 
 | 2014 | 	memcpy(&vcc->qos, qos, sizeof(struct atm_qos)); | 
 | 2015 | 	 | 
 | 2016 | 	/* update rate control parameters */ | 
 | 2017 | 	fore200e_rate_ctrl(qos, &fore200e_vcc->rate); | 
 | 2018 |  | 
 | 2019 | 	set_bit(ATM_VF_HASQOS, &vcc->flags); | 
 | 2020 |  | 
 | 2021 | 	return 0; | 
 | 2022 |     } | 
 | 2023 |      | 
 | 2024 |     return -EINVAL; | 
 | 2025 | } | 
 | 2026 |      | 
 | 2027 |  | 
 | 2028 | static int fore200e_irq_request(struct fore200e *fore200e) | 
 | 2029 | { | 
 | 2030 |     if (request_irq(fore200e->irq, fore200e_interrupt, IRQF_SHARED, fore200e->name, fore200e->atm_dev) < 0) { | 
 | 2031 |  | 
 | 2032 | 	printk(FORE200E "unable to reserve IRQ %s for device %s\n", | 
 | 2033 | 	       fore200e_irq_itoa(fore200e->irq), fore200e->name); | 
 | 2034 | 	return -EBUSY; | 
 | 2035 |     } | 
 | 2036 |  | 
 | 2037 |     printk(FORE200E "IRQ %s reserved for device %s\n", | 
 | 2038 | 	   fore200e_irq_itoa(fore200e->irq), fore200e->name); | 
 | 2039 |  | 
 | 2040 | #ifdef FORE200E_USE_TASKLET | 
 | 2041 |     tasklet_init(&fore200e->tx_tasklet, fore200e_tx_tasklet, (unsigned long)fore200e); | 
 | 2042 |     tasklet_init(&fore200e->rx_tasklet, fore200e_rx_tasklet, (unsigned long)fore200e); | 
 | 2043 | #endif | 
 | 2044 |  | 
 | 2045 |     fore200e->state = FORE200E_STATE_IRQ; | 
 | 2046 |     return 0; | 
 | 2047 | } | 
 | 2048 |  | 
 | 2049 |  | 
 | 2050 | static int fore200e_get_esi(struct fore200e *fore200e) | 
 | 2051 | { | 
 | 2052 |     struct prom_data* prom = kzalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA); | 
 | 2053 |     int ok, i; | 
 | 2054 |  | 
 | 2055 |     if (!prom) | 
 | 2056 | 	return -ENOMEM; | 
 | 2057 |  | 
 | 2058 |     ok = fore200e->bus->prom_read(fore200e, prom); | 
 | 2059 |     if (ok < 0) { | 
 | 2060 | 	kfree(prom); | 
 | 2061 | 	return -EBUSY; | 
 | 2062 |     } | 
 | 2063 | 	 | 
 | 2064 |     printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %pM\n", | 
 | 2065 | 	   fore200e->name,  | 
 | 2066 | 	   (prom->hw_revision & 0xFF) + '@',    /* probably meaningless with SBA boards */ | 
 | 2067 | 	   prom->serial_number & 0xFFFF, &prom->mac_addr[2]); | 
 | 2068 | 	 | 
 | 2069 |     for (i = 0; i < ESI_LEN; i++) { | 
 | 2070 | 	fore200e->esi[ i ] = fore200e->atm_dev->esi[ i ] = prom->mac_addr[ i + 2 ]; | 
 | 2071 |     } | 
 | 2072 |      | 
 | 2073 |     kfree(prom); | 
 | 2074 |  | 
 | 2075 |     return 0; | 
 | 2076 | } | 
 | 2077 |  | 
 | 2078 |  | 
 | 2079 | static int fore200e_alloc_rx_buf(struct fore200e *fore200e) | 
 | 2080 | { | 
 | 2081 |     int scheme, magn, nbr, size, i; | 
 | 2082 |  | 
 | 2083 |     struct host_bsq* bsq; | 
 | 2084 |     struct buffer*   buffer; | 
 | 2085 |  | 
 | 2086 |     for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
 | 2087 | 	for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
 | 2088 |  | 
 | 2089 | 	    bsq = &fore200e->host_bsq[ scheme ][ magn ]; | 
 | 2090 |  | 
 | 2091 | 	    nbr  = fore200e_rx_buf_nbr[ scheme ][ magn ]; | 
 | 2092 | 	    size = fore200e_rx_buf_size[ scheme ][ magn ]; | 
 | 2093 |  | 
 | 2094 | 	    DPRINTK(2, "rx buffers %d / %d are being allocated\n", scheme, magn); | 
 | 2095 |  | 
 | 2096 | 	    /* allocate the array of receive buffers */ | 
 | 2097 | 	    buffer = bsq->buffer = kcalloc(nbr, sizeof(struct buffer), | 
 | 2098 |                                            GFP_KERNEL); | 
 | 2099 |  | 
 | 2100 | 	    if (buffer == NULL) | 
 | 2101 | 		return -ENOMEM; | 
 | 2102 |  | 
 | 2103 | 	    bsq->freebuf = NULL; | 
 | 2104 |  | 
 | 2105 | 	    for (i = 0; i < nbr; i++) { | 
 | 2106 |  | 
 | 2107 | 		buffer[ i ].scheme = scheme; | 
 | 2108 | 		buffer[ i ].magn   = magn; | 
 | 2109 | #ifdef FORE200E_BSQ_DEBUG | 
 | 2110 | 		buffer[ i ].index  = i; | 
 | 2111 | 		buffer[ i ].supplied = 0; | 
 | 2112 | #endif | 
 | 2113 |  | 
 | 2114 | 		/* allocate the receive buffer body */ | 
 | 2115 | 		if (fore200e_chunk_alloc(fore200e, | 
 | 2116 | 					 &buffer[ i ].data, size, fore200e->bus->buffer_alignment, | 
 | 2117 | 					 DMA_FROM_DEVICE) < 0) { | 
 | 2118 | 		     | 
 | 2119 | 		    while (i > 0) | 
 | 2120 | 			fore200e_chunk_free(fore200e, &buffer[ --i ].data); | 
 | 2121 | 		    kfree(buffer); | 
 | 2122 | 		     | 
 | 2123 | 		    return -ENOMEM; | 
 | 2124 | 		} | 
 | 2125 |  | 
 | 2126 | 		/* insert the buffer into the free buffer list */ | 
 | 2127 | 		buffer[ i ].next = bsq->freebuf; | 
 | 2128 | 		bsq->freebuf = &buffer[ i ]; | 
 | 2129 | 	    } | 
 | 2130 | 	    /* all the buffers are free, initially */ | 
 | 2131 | 	    bsq->freebuf_count = nbr; | 
 | 2132 |  | 
 | 2133 | #ifdef FORE200E_BSQ_DEBUG | 
 | 2134 | 	    bsq_audit(3, bsq, scheme, magn); | 
 | 2135 | #endif | 
 | 2136 | 	} | 
 | 2137 |     } | 
 | 2138 |  | 
 | 2139 |     fore200e->state = FORE200E_STATE_ALLOC_BUF; | 
 | 2140 |     return 0; | 
 | 2141 | } | 
 | 2142 |  | 
 | 2143 |  | 
 | 2144 | static int fore200e_init_bs_queue(struct fore200e *fore200e) | 
 | 2145 | { | 
 | 2146 |     int scheme, magn, i; | 
 | 2147 |  | 
 | 2148 |     struct host_bsq*     bsq; | 
 | 2149 |     struct cp_bsq_entry __iomem * cp_entry; | 
 | 2150 |  | 
 | 2151 |     for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
 | 2152 | 	for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
 | 2153 |  | 
 | 2154 | 	    DPRINTK(2, "buffer supply queue %d / %d is being initialized\n", scheme, magn); | 
 | 2155 |  | 
 | 2156 | 	    bsq = &fore200e->host_bsq[ scheme ][ magn ]; | 
 | 2157 |  | 
 | 2158 | 	    /* allocate and align the array of status words */ | 
 | 2159 | 	    if (fore200e->bus->dma_chunk_alloc(fore200e, | 
 | 2160 | 					       &bsq->status, | 
 | 2161 | 					       sizeof(enum status),  | 
 | 2162 | 					       QUEUE_SIZE_BS, | 
 | 2163 | 					       fore200e->bus->status_alignment) < 0) { | 
 | 2164 | 		return -ENOMEM; | 
 | 2165 | 	    } | 
 | 2166 |  | 
 | 2167 | 	    /* allocate and align the array of receive buffer descriptors */ | 
 | 2168 | 	    if (fore200e->bus->dma_chunk_alloc(fore200e, | 
 | 2169 | 					       &bsq->rbd_block, | 
 | 2170 | 					       sizeof(struct rbd_block), | 
 | 2171 | 					       QUEUE_SIZE_BS, | 
 | 2172 | 					       fore200e->bus->descr_alignment) < 0) { | 
 | 2173 | 		 | 
 | 2174 | 		fore200e->bus->dma_chunk_free(fore200e, &bsq->status); | 
 | 2175 | 		return -ENOMEM; | 
 | 2176 | 	    } | 
 | 2177 | 	     | 
 | 2178 | 	    /* get the base address of the cp resident buffer supply queue entries */ | 
 | 2179 | 	    cp_entry = fore200e->virt_base +  | 
 | 2180 | 		       fore200e->bus->read(&fore200e->cp_queues->cp_bsq[ scheme ][ magn ]); | 
 | 2181 | 	     | 
 | 2182 | 	    /* fill the host resident and cp resident buffer supply queue entries */ | 
 | 2183 | 	    for (i = 0; i < QUEUE_SIZE_BS; i++) { | 
 | 2184 | 		 | 
 | 2185 | 		bsq->host_entry[ i ].status =  | 
 | 2186 | 		                     FORE200E_INDEX(bsq->status.align_addr, enum status, i); | 
 | 2187 | 	        bsq->host_entry[ i ].rbd_block = | 
 | 2188 | 		                     FORE200E_INDEX(bsq->rbd_block.align_addr, struct rbd_block, i); | 
 | 2189 | 		bsq->host_entry[ i ].rbd_block_dma = | 
 | 2190 | 		                     FORE200E_DMA_INDEX(bsq->rbd_block.dma_addr, struct rbd_block, i); | 
 | 2191 | 		bsq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
 | 2192 | 		 | 
 | 2193 | 		*bsq->host_entry[ i ].status = STATUS_FREE; | 
 | 2194 | 		 | 
 | 2195 | 		fore200e->bus->write(FORE200E_DMA_INDEX(bsq->status.dma_addr, enum status, i),  | 
 | 2196 | 				     &cp_entry[ i ].status_haddr); | 
 | 2197 | 	    } | 
 | 2198 | 	} | 
 | 2199 |     } | 
 | 2200 |  | 
 | 2201 |     fore200e->state = FORE200E_STATE_INIT_BSQ; | 
 | 2202 |     return 0; | 
 | 2203 | } | 
 | 2204 |  | 
 | 2205 |  | 
 | 2206 | static int fore200e_init_rx_queue(struct fore200e *fore200e) | 
 | 2207 | { | 
 | 2208 |     struct host_rxq*     rxq =  &fore200e->host_rxq; | 
 | 2209 |     struct cp_rxq_entry __iomem * cp_entry; | 
 | 2210 |     int i; | 
 | 2211 |  | 
 | 2212 |     DPRINTK(2, "receive queue is being initialized\n"); | 
 | 2213 |  | 
 | 2214 |     /* allocate and align the array of status words */ | 
 | 2215 |     if (fore200e->bus->dma_chunk_alloc(fore200e, | 
 | 2216 | 				       &rxq->status, | 
 | 2217 | 				       sizeof(enum status),  | 
 | 2218 | 				       QUEUE_SIZE_RX, | 
 | 2219 | 				       fore200e->bus->status_alignment) < 0) { | 
 | 2220 | 	return -ENOMEM; | 
 | 2221 |     } | 
 | 2222 |  | 
 | 2223 |     /* allocate and align the array of receive PDU descriptors */ | 
 | 2224 |     if (fore200e->bus->dma_chunk_alloc(fore200e, | 
 | 2225 | 				       &rxq->rpd, | 
 | 2226 | 				       sizeof(struct rpd),  | 
 | 2227 | 				       QUEUE_SIZE_RX, | 
 | 2228 | 				       fore200e->bus->descr_alignment) < 0) { | 
 | 2229 | 	 | 
 | 2230 | 	fore200e->bus->dma_chunk_free(fore200e, &rxq->status); | 
 | 2231 | 	return -ENOMEM; | 
 | 2232 |     } | 
 | 2233 |  | 
 | 2234 |     /* get the base address of the cp resident rx queue entries */ | 
 | 2235 |     cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_rxq); | 
 | 2236 |  | 
 | 2237 |     /* fill the host resident and cp resident rx entries */ | 
 | 2238 |     for (i=0; i < QUEUE_SIZE_RX; i++) { | 
 | 2239 | 	 | 
 | 2240 | 	rxq->host_entry[ i ].status =  | 
 | 2241 | 	                     FORE200E_INDEX(rxq->status.align_addr, enum status, i); | 
 | 2242 | 	rxq->host_entry[ i ].rpd =  | 
 | 2243 | 	                     FORE200E_INDEX(rxq->rpd.align_addr, struct rpd, i); | 
 | 2244 | 	rxq->host_entry[ i ].rpd_dma =  | 
 | 2245 | 	                     FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i); | 
 | 2246 | 	rxq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
 | 2247 |  | 
 | 2248 | 	*rxq->host_entry[ i ].status = STATUS_FREE; | 
 | 2249 |  | 
 | 2250 | 	fore200e->bus->write(FORE200E_DMA_INDEX(rxq->status.dma_addr, enum status, i),  | 
 | 2251 | 			     &cp_entry[ i ].status_haddr); | 
 | 2252 |  | 
 | 2253 | 	fore200e->bus->write(FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i), | 
 | 2254 | 			     &cp_entry[ i ].rpd_haddr); | 
 | 2255 |     } | 
 | 2256 |  | 
 | 2257 |     /* set the head entry of the queue */ | 
 | 2258 |     rxq->head = 0; | 
 | 2259 |  | 
 | 2260 |     fore200e->state = FORE200E_STATE_INIT_RXQ; | 
 | 2261 |     return 0; | 
 | 2262 | } | 
 | 2263 |  | 
 | 2264 |  | 
 | 2265 | static int fore200e_init_tx_queue(struct fore200e *fore200e) | 
 | 2266 | { | 
 | 2267 |     struct host_txq*     txq =  &fore200e->host_txq; | 
 | 2268 |     struct cp_txq_entry __iomem * cp_entry; | 
 | 2269 |     int i; | 
 | 2270 |  | 
 | 2271 |     DPRINTK(2, "transmit queue is being initialized\n"); | 
 | 2272 |  | 
 | 2273 |     /* allocate and align the array of status words */ | 
 | 2274 |     if (fore200e->bus->dma_chunk_alloc(fore200e, | 
 | 2275 | 				       &txq->status, | 
 | 2276 | 				       sizeof(enum status),  | 
 | 2277 | 				       QUEUE_SIZE_TX, | 
 | 2278 | 				       fore200e->bus->status_alignment) < 0) { | 
 | 2279 | 	return -ENOMEM; | 
 | 2280 |     } | 
 | 2281 |  | 
 | 2282 |     /* allocate and align the array of transmit PDU descriptors */ | 
 | 2283 |     if (fore200e->bus->dma_chunk_alloc(fore200e, | 
 | 2284 | 				       &txq->tpd, | 
 | 2285 | 				       sizeof(struct tpd),  | 
 | 2286 | 				       QUEUE_SIZE_TX, | 
 | 2287 | 				       fore200e->bus->descr_alignment) < 0) { | 
 | 2288 | 	 | 
 | 2289 | 	fore200e->bus->dma_chunk_free(fore200e, &txq->status); | 
 | 2290 | 	return -ENOMEM; | 
 | 2291 |     } | 
 | 2292 |  | 
 | 2293 |     /* get the base address of the cp resident tx queue entries */ | 
 | 2294 |     cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_txq); | 
 | 2295 |  | 
 | 2296 |     /* fill the host resident and cp resident tx entries */ | 
 | 2297 |     for (i=0; i < QUEUE_SIZE_TX; i++) { | 
 | 2298 | 	 | 
 | 2299 | 	txq->host_entry[ i ].status =  | 
 | 2300 | 	                     FORE200E_INDEX(txq->status.align_addr, enum status, i); | 
 | 2301 | 	txq->host_entry[ i ].tpd =  | 
 | 2302 | 	                     FORE200E_INDEX(txq->tpd.align_addr, struct tpd, i); | 
 | 2303 | 	txq->host_entry[ i ].tpd_dma  =  | 
 | 2304 |                              FORE200E_DMA_INDEX(txq->tpd.dma_addr, struct tpd, i); | 
 | 2305 | 	txq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
 | 2306 |  | 
 | 2307 | 	*txq->host_entry[ i ].status = STATUS_FREE; | 
 | 2308 | 	 | 
 | 2309 | 	fore200e->bus->write(FORE200E_DMA_INDEX(txq->status.dma_addr, enum status, i),  | 
 | 2310 | 			     &cp_entry[ i ].status_haddr); | 
 | 2311 | 	 | 
 | 2312 |         /* although there is a one-to-one mapping of tx queue entries and tpds, | 
 | 2313 | 	   we do not write here the DMA (physical) base address of each tpd into | 
 | 2314 | 	   the related cp resident entry, because the cp relies on this write | 
 | 2315 | 	   operation to detect that a new pdu has been submitted for tx */ | 
 | 2316 |     } | 
 | 2317 |  | 
 | 2318 |     /* set the head and tail entries of the queue */ | 
 | 2319 |     txq->head = 0; | 
 | 2320 |     txq->tail = 0; | 
 | 2321 |  | 
 | 2322 |     fore200e->state = FORE200E_STATE_INIT_TXQ; | 
 | 2323 |     return 0; | 
 | 2324 | } | 
 | 2325 |  | 
 | 2326 |  | 
 | 2327 | static int fore200e_init_cmd_queue(struct fore200e *fore200e) | 
 | 2328 | { | 
 | 2329 |     struct host_cmdq*     cmdq =  &fore200e->host_cmdq; | 
 | 2330 |     struct cp_cmdq_entry __iomem * cp_entry; | 
 | 2331 |     int i; | 
 | 2332 |  | 
 | 2333 |     DPRINTK(2, "command queue is being initialized\n"); | 
 | 2334 |  | 
 | 2335 |     /* allocate and align the array of status words */ | 
 | 2336 |     if (fore200e->bus->dma_chunk_alloc(fore200e, | 
 | 2337 | 				       &cmdq->status, | 
 | 2338 | 				       sizeof(enum status),  | 
 | 2339 | 				       QUEUE_SIZE_CMD, | 
 | 2340 | 				       fore200e->bus->status_alignment) < 0) { | 
 | 2341 | 	return -ENOMEM; | 
 | 2342 |     } | 
 | 2343 |      | 
 | 2344 |     /* get the base address of the cp resident cmd queue entries */ | 
 | 2345 |     cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_cmdq); | 
 | 2346 |  | 
 | 2347 |     /* fill the host resident and cp resident cmd entries */ | 
 | 2348 |     for (i=0; i < QUEUE_SIZE_CMD; i++) { | 
 | 2349 | 	 | 
 | 2350 | 	cmdq->host_entry[ i ].status   =  | 
 | 2351 |                               FORE200E_INDEX(cmdq->status.align_addr, enum status, i); | 
 | 2352 | 	cmdq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
 | 2353 |  | 
 | 2354 | 	*cmdq->host_entry[ i ].status = STATUS_FREE; | 
 | 2355 |  | 
 | 2356 | 	fore200e->bus->write(FORE200E_DMA_INDEX(cmdq->status.dma_addr, enum status, i),  | 
 | 2357 |                              &cp_entry[ i ].status_haddr); | 
 | 2358 |     } | 
 | 2359 |  | 
 | 2360 |     /* set the head entry of the queue */ | 
 | 2361 |     cmdq->head = 0; | 
 | 2362 |  | 
 | 2363 |     fore200e->state = FORE200E_STATE_INIT_CMDQ; | 
 | 2364 |     return 0; | 
 | 2365 | } | 
 | 2366 |  | 
 | 2367 |  | 
 | 2368 | static void fore200e_param_bs_queue(struct fore200e *fore200e, | 
 | 2369 | 				    enum buffer_scheme scheme, | 
 | 2370 | 				    enum buffer_magn magn, int queue_length, | 
 | 2371 | 				    int pool_size, int supply_blksize) | 
 | 2372 | { | 
 | 2373 |     struct bs_spec __iomem * bs_spec = &fore200e->cp_queues->init.bs_spec[ scheme ][ magn ]; | 
 | 2374 |  | 
 | 2375 |     fore200e->bus->write(queue_length,                           &bs_spec->queue_length); | 
 | 2376 |     fore200e->bus->write(fore200e_rx_buf_size[ scheme ][ magn ], &bs_spec->buffer_size); | 
 | 2377 |     fore200e->bus->write(pool_size,                              &bs_spec->pool_size); | 
 | 2378 |     fore200e->bus->write(supply_blksize,                         &bs_spec->supply_blksize); | 
 | 2379 | } | 
 | 2380 |  | 
 | 2381 |  | 
 | 2382 | static int fore200e_initialize(struct fore200e *fore200e) | 
 | 2383 | { | 
 | 2384 |     struct cp_queues __iomem * cpq; | 
 | 2385 |     int               ok, scheme, magn; | 
 | 2386 |  | 
 | 2387 |     DPRINTK(2, "device %s being initialized\n", fore200e->name); | 
 | 2388 |  | 
 | 2389 |     mutex_init(&fore200e->rate_mtx); | 
 | 2390 |     spin_lock_init(&fore200e->q_lock); | 
 | 2391 |  | 
 | 2392 |     cpq = fore200e->cp_queues = fore200e->virt_base + FORE200E_CP_QUEUES_OFFSET; | 
 | 2393 |  | 
 | 2394 |     /* enable cp to host interrupts */ | 
 | 2395 |     fore200e->bus->write(1, &cpq->imask); | 
 | 2396 |  | 
 | 2397 |     if (fore200e->bus->irq_enable) | 
 | 2398 | 	fore200e->bus->irq_enable(fore200e); | 
 | 2399 |      | 
 | 2400 |     fore200e->bus->write(NBR_CONNECT, &cpq->init.num_connect); | 
 | 2401 |  | 
 | 2402 |     fore200e->bus->write(QUEUE_SIZE_CMD, &cpq->init.cmd_queue_len); | 
 | 2403 |     fore200e->bus->write(QUEUE_SIZE_RX,  &cpq->init.rx_queue_len); | 
 | 2404 |     fore200e->bus->write(QUEUE_SIZE_TX,  &cpq->init.tx_queue_len); | 
 | 2405 |  | 
 | 2406 |     fore200e->bus->write(RSD_EXTENSION,  &cpq->init.rsd_extension); | 
 | 2407 |     fore200e->bus->write(TSD_EXTENSION,  &cpq->init.tsd_extension); | 
 | 2408 |  | 
 | 2409 |     for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) | 
 | 2410 | 	for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) | 
 | 2411 | 	    fore200e_param_bs_queue(fore200e, scheme, magn, | 
 | 2412 | 				    QUEUE_SIZE_BS,  | 
 | 2413 | 				    fore200e_rx_buf_nbr[ scheme ][ magn ], | 
 | 2414 | 				    RBD_BLK_SIZE); | 
 | 2415 |  | 
 | 2416 |     /* issue the initialize command */ | 
 | 2417 |     fore200e->bus->write(STATUS_PENDING,    &cpq->init.status); | 
 | 2418 |     fore200e->bus->write(OPCODE_INITIALIZE, &cpq->init.opcode); | 
 | 2419 |  | 
 | 2420 |     ok = fore200e_io_poll(fore200e, &cpq->init.status, STATUS_COMPLETE, 3000); | 
 | 2421 |     if (ok == 0) { | 
 | 2422 | 	printk(FORE200E "device %s initialization failed\n", fore200e->name); | 
 | 2423 | 	return -ENODEV; | 
 | 2424 |     } | 
 | 2425 |  | 
 | 2426 |     printk(FORE200E "device %s initialized\n", fore200e->name); | 
 | 2427 |  | 
 | 2428 |     fore200e->state = FORE200E_STATE_INITIALIZE; | 
 | 2429 |     return 0; | 
 | 2430 | } | 
 | 2431 |  | 
 | 2432 |  | 
 | 2433 | static void fore200e_monitor_putc(struct fore200e *fore200e, char c) | 
 | 2434 | { | 
 | 2435 |     struct cp_monitor __iomem * monitor = fore200e->cp_monitor; | 
 | 2436 |  | 
 | 2437 | #if 0 | 
 | 2438 |     printk("%c", c); | 
 | 2439 | #endif | 
 | 2440 |     fore200e->bus->write(((u32) c) | FORE200E_CP_MONITOR_UART_AVAIL, &monitor->soft_uart.send); | 
 | 2441 | } | 
 | 2442 |  | 
 | 2443 |  | 
 | 2444 | static int fore200e_monitor_getc(struct fore200e *fore200e) | 
 | 2445 | { | 
 | 2446 |     struct cp_monitor __iomem * monitor = fore200e->cp_monitor; | 
 | 2447 |     unsigned long      timeout = jiffies + msecs_to_jiffies(50); | 
 | 2448 |     int                c; | 
 | 2449 |  | 
 | 2450 |     while (time_before(jiffies, timeout)) { | 
 | 2451 |  | 
 | 2452 | 	c = (int) fore200e->bus->read(&monitor->soft_uart.recv); | 
 | 2453 |  | 
 | 2454 | 	if (c & FORE200E_CP_MONITOR_UART_AVAIL) { | 
 | 2455 |  | 
 | 2456 | 	    fore200e->bus->write(FORE200E_CP_MONITOR_UART_FREE, &monitor->soft_uart.recv); | 
 | 2457 | #if 0 | 
 | 2458 | 	    printk("%c", c & 0xFF); | 
 | 2459 | #endif | 
 | 2460 | 	    return c & 0xFF; | 
 | 2461 | 	} | 
 | 2462 |     } | 
 | 2463 |  | 
 | 2464 |     return -1; | 
 | 2465 | } | 
 | 2466 |  | 
 | 2467 |  | 
 | 2468 | static void fore200e_monitor_puts(struct fore200e *fore200e, char *str) | 
 | 2469 | { | 
 | 2470 |     while (*str) { | 
 | 2471 |  | 
 | 2472 | 	/* the i960 monitor doesn't accept any new character if it has something to say */ | 
 | 2473 | 	while (fore200e_monitor_getc(fore200e) >= 0); | 
 | 2474 | 	 | 
 | 2475 | 	fore200e_monitor_putc(fore200e, *str++); | 
 | 2476 |     } | 
 | 2477 |  | 
 | 2478 |     while (fore200e_monitor_getc(fore200e) >= 0); | 
 | 2479 | } | 
 | 2480 |  | 
 | 2481 | #ifdef __LITTLE_ENDIAN | 
 | 2482 | #define FW_EXT ".bin" | 
 | 2483 | #else | 
 | 2484 | #define FW_EXT "_ecd.bin2" | 
 | 2485 | #endif | 
 | 2486 |  | 
 | 2487 | static int fore200e_load_and_start_fw(struct fore200e *fore200e) | 
 | 2488 | { | 
 | 2489 |     const struct firmware *firmware; | 
 | 2490 |     struct device *device; | 
 | 2491 |     const struct fw_header *fw_header; | 
 | 2492 |     const __le32 *fw_data; | 
 | 2493 |     u32 fw_size; | 
 | 2494 |     u32 __iomem *load_addr; | 
 | 2495 |     char buf[48]; | 
 | 2496 |     int err = -ENODEV; | 
 | 2497 |  | 
 | 2498 |     if (strcmp(fore200e->bus->model_name, "PCA-200E") == 0) | 
 | 2499 | 	device = &((struct pci_dev *) fore200e->bus_dev)->dev; | 
 | 2500 | #ifdef CONFIG_SBUS | 
 | 2501 |     else if (strcmp(fore200e->bus->model_name, "SBA-200E") == 0) | 
 | 2502 | 	device = &((struct platform_device *) fore200e->bus_dev)->dev; | 
 | 2503 | #endif | 
 | 2504 |     else | 
 | 2505 | 	return err; | 
 | 2506 |  | 
 | 2507 |     sprintf(buf, "%s%s", fore200e->bus->proc_name, FW_EXT); | 
 | 2508 |     if ((err = request_firmware(&firmware, buf, device)) < 0) { | 
 | 2509 | 	printk(FORE200E "problem loading firmware image %s\n", fore200e->bus->model_name); | 
 | 2510 | 	return err; | 
 | 2511 |     } | 
 | 2512 |  | 
 | 2513 |     fw_data = (const __le32 *)firmware->data; | 
 | 2514 |     fw_size = firmware->size / sizeof(u32); | 
 | 2515 |     fw_header = (const struct fw_header *)firmware->data; | 
 | 2516 |     load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset); | 
 | 2517 |  | 
 | 2518 |     DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n", | 
 | 2519 | 	    fore200e->name, load_addr, fw_size); | 
 | 2520 |  | 
 | 2521 |     if (le32_to_cpu(fw_header->magic) != FW_HEADER_MAGIC) { | 
 | 2522 | 	printk(FORE200E "corrupted %s firmware image\n", fore200e->bus->model_name); | 
 | 2523 | 	goto release; | 
 | 2524 |     } | 
 | 2525 |  | 
 | 2526 |     for (; fw_size--; fw_data++, load_addr++) | 
 | 2527 | 	fore200e->bus->write(le32_to_cpu(*fw_data), load_addr); | 
 | 2528 |  | 
 | 2529 |     DPRINTK(2, "device %s firmware being started\n", fore200e->name); | 
 | 2530 |  | 
 | 2531 | #if defined(__sparc_v9__) | 
 | 2532 |     /* reported to be required by SBA cards on some sparc64 hosts */ | 
 | 2533 |     fore200e_spin(100); | 
 | 2534 | #endif | 
 | 2535 |  | 
 | 2536 |     sprintf(buf, "\rgo %x\r", le32_to_cpu(fw_header->start_offset)); | 
 | 2537 |     fore200e_monitor_puts(fore200e, buf); | 
 | 2538 |  | 
 | 2539 |     if (fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_CP_RUNNING, 1000) == 0) { | 
 | 2540 | 	printk(FORE200E "device %s firmware didn't start\n", fore200e->name); | 
 | 2541 | 	goto release; | 
 | 2542 |     } | 
 | 2543 |  | 
 | 2544 |     printk(FORE200E "device %s firmware started\n", fore200e->name); | 
 | 2545 |  | 
 | 2546 |     fore200e->state = FORE200E_STATE_START_FW; | 
 | 2547 |     err = 0; | 
 | 2548 |  | 
 | 2549 | release: | 
 | 2550 |     release_firmware(firmware); | 
 | 2551 |     return err; | 
 | 2552 | } | 
 | 2553 |  | 
 | 2554 |  | 
 | 2555 | static int fore200e_register(struct fore200e *fore200e, struct device *parent) | 
 | 2556 | { | 
 | 2557 |     struct atm_dev* atm_dev; | 
 | 2558 |  | 
 | 2559 |     DPRINTK(2, "device %s being registered\n", fore200e->name); | 
 | 2560 |  | 
 | 2561 |     atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops, | 
 | 2562 |                                -1, NULL); | 
 | 2563 |     if (atm_dev == NULL) { | 
 | 2564 | 	printk(FORE200E "unable to register device %s\n", fore200e->name); | 
 | 2565 | 	return -ENODEV; | 
 | 2566 |     } | 
 | 2567 |  | 
 | 2568 |     atm_dev->dev_data = fore200e; | 
 | 2569 |     fore200e->atm_dev = atm_dev; | 
 | 2570 |  | 
 | 2571 |     atm_dev->ci_range.vpi_bits = FORE200E_VPI_BITS; | 
 | 2572 |     atm_dev->ci_range.vci_bits = FORE200E_VCI_BITS; | 
 | 2573 |  | 
 | 2574 |     fore200e->available_cell_rate = ATM_OC3_PCR; | 
 | 2575 |  | 
 | 2576 |     fore200e->state = FORE200E_STATE_REGISTER; | 
 | 2577 |     return 0; | 
 | 2578 | } | 
 | 2579 |  | 
 | 2580 |  | 
 | 2581 | static int fore200e_init(struct fore200e *fore200e, struct device *parent) | 
 | 2582 | { | 
 | 2583 |     if (fore200e_register(fore200e, parent) < 0) | 
 | 2584 | 	return -ENODEV; | 
 | 2585 |      | 
 | 2586 |     if (fore200e->bus->configure(fore200e) < 0) | 
 | 2587 | 	return -ENODEV; | 
 | 2588 |  | 
 | 2589 |     if (fore200e->bus->map(fore200e) < 0) | 
 | 2590 | 	return -ENODEV; | 
 | 2591 |  | 
 | 2592 |     if (fore200e_reset(fore200e, 1) < 0) | 
 | 2593 | 	return -ENODEV; | 
 | 2594 |  | 
 | 2595 |     if (fore200e_load_and_start_fw(fore200e) < 0) | 
 | 2596 | 	return -ENODEV; | 
 | 2597 |  | 
 | 2598 |     if (fore200e_initialize(fore200e) < 0) | 
 | 2599 | 	return -ENODEV; | 
 | 2600 |  | 
 | 2601 |     if (fore200e_init_cmd_queue(fore200e) < 0) | 
 | 2602 | 	return -ENOMEM; | 
 | 2603 |  | 
 | 2604 |     if (fore200e_init_tx_queue(fore200e) < 0) | 
 | 2605 | 	return -ENOMEM; | 
 | 2606 |  | 
 | 2607 |     if (fore200e_init_rx_queue(fore200e) < 0) | 
 | 2608 | 	return -ENOMEM; | 
 | 2609 |  | 
 | 2610 |     if (fore200e_init_bs_queue(fore200e) < 0) | 
 | 2611 | 	return -ENOMEM; | 
 | 2612 |  | 
 | 2613 |     if (fore200e_alloc_rx_buf(fore200e) < 0) | 
 | 2614 | 	return -ENOMEM; | 
 | 2615 |  | 
 | 2616 |     if (fore200e_get_esi(fore200e) < 0) | 
 | 2617 | 	return -EIO; | 
 | 2618 |  | 
 | 2619 |     if (fore200e_irq_request(fore200e) < 0) | 
 | 2620 | 	return -EBUSY; | 
 | 2621 |  | 
 | 2622 |     fore200e_supply(fore200e); | 
 | 2623 |  | 
 | 2624 |     /* all done, board initialization is now complete */ | 
 | 2625 |     fore200e->state = FORE200E_STATE_COMPLETE; | 
 | 2626 |     return 0; | 
 | 2627 | } | 
 | 2628 |  | 
 | 2629 | #ifdef CONFIG_SBUS | 
 | 2630 | static const struct of_device_id fore200e_sba_match[]; | 
 | 2631 | static int fore200e_sba_probe(struct platform_device *op) | 
 | 2632 | { | 
 | 2633 | 	const struct of_device_id *match; | 
 | 2634 | 	const struct fore200e_bus *bus; | 
 | 2635 | 	struct fore200e *fore200e; | 
 | 2636 | 	static int index = 0; | 
 | 2637 | 	int err; | 
 | 2638 |  | 
 | 2639 | 	match = of_match_device(fore200e_sba_match, &op->dev); | 
 | 2640 | 	if (!match) | 
 | 2641 | 		return -EINVAL; | 
 | 2642 | 	bus = match->data; | 
 | 2643 |  | 
 | 2644 | 	fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL); | 
 | 2645 | 	if (!fore200e) | 
 | 2646 | 		return -ENOMEM; | 
 | 2647 |  | 
 | 2648 | 	fore200e->bus = bus; | 
 | 2649 | 	fore200e->bus_dev = op; | 
 | 2650 | 	fore200e->irq = op->archdata.irqs[0]; | 
 | 2651 | 	fore200e->phys_base = op->resource[0].start; | 
 | 2652 |  | 
 | 2653 | 	sprintf(fore200e->name, "%s-%d", bus->model_name, index); | 
 | 2654 |  | 
 | 2655 | 	err = fore200e_init(fore200e, &op->dev); | 
 | 2656 | 	if (err < 0) { | 
 | 2657 | 		fore200e_shutdown(fore200e); | 
 | 2658 | 		kfree(fore200e); | 
 | 2659 | 		return err; | 
 | 2660 | 	} | 
 | 2661 |  | 
 | 2662 | 	index++; | 
 | 2663 | 	dev_set_drvdata(&op->dev, fore200e); | 
 | 2664 |  | 
 | 2665 | 	return 0; | 
 | 2666 | } | 
 | 2667 |  | 
 | 2668 | static int fore200e_sba_remove(struct platform_device *op) | 
 | 2669 | { | 
 | 2670 | 	struct fore200e *fore200e = dev_get_drvdata(&op->dev); | 
 | 2671 |  | 
 | 2672 | 	fore200e_shutdown(fore200e); | 
 | 2673 | 	kfree(fore200e); | 
 | 2674 |  | 
 | 2675 | 	return 0; | 
 | 2676 | } | 
 | 2677 |  | 
 | 2678 | static const struct of_device_id fore200e_sba_match[] = { | 
 | 2679 | 	{ | 
 | 2680 | 		.name = SBA200E_PROM_NAME, | 
 | 2681 | 		.data = (void *) &fore200e_bus[1], | 
 | 2682 | 	}, | 
 | 2683 | 	{}, | 
 | 2684 | }; | 
 | 2685 | MODULE_DEVICE_TABLE(of, fore200e_sba_match); | 
 | 2686 |  | 
 | 2687 | static struct platform_driver fore200e_sba_driver = { | 
 | 2688 | 	.driver = { | 
 | 2689 | 		.name = "fore_200e", | 
 | 2690 | 		.of_match_table = fore200e_sba_match, | 
 | 2691 | 	}, | 
 | 2692 | 	.probe		= fore200e_sba_probe, | 
 | 2693 | 	.remove		= fore200e_sba_remove, | 
 | 2694 | }; | 
 | 2695 | #endif | 
 | 2696 |  | 
 | 2697 | #ifdef CONFIG_PCI | 
 | 2698 | static int fore200e_pca_detect(struct pci_dev *pci_dev, | 
 | 2699 | 			       const struct pci_device_id *pci_ent) | 
 | 2700 | { | 
 | 2701 |     const struct fore200e_bus* bus = (struct fore200e_bus*) pci_ent->driver_data; | 
 | 2702 |     struct fore200e* fore200e; | 
 | 2703 |     int err = 0; | 
 | 2704 |     static int index = 0; | 
 | 2705 |  | 
 | 2706 |     if (pci_enable_device(pci_dev)) { | 
 | 2707 | 	err = -EINVAL; | 
 | 2708 | 	goto out; | 
 | 2709 |     } | 
 | 2710 |  | 
 | 2711 |     if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32))) { | 
 | 2712 | 	err = -EINVAL; | 
 | 2713 | 	goto out; | 
 | 2714 |     } | 
 | 2715 |      | 
 | 2716 |     fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL); | 
 | 2717 |     if (fore200e == NULL) { | 
 | 2718 | 	err = -ENOMEM; | 
 | 2719 | 	goto out_disable; | 
 | 2720 |     } | 
 | 2721 |  | 
 | 2722 |     fore200e->bus       = bus; | 
 | 2723 |     fore200e->bus_dev   = pci_dev;     | 
 | 2724 |     fore200e->irq       = pci_dev->irq; | 
 | 2725 |     fore200e->phys_base = pci_resource_start(pci_dev, 0); | 
 | 2726 |  | 
 | 2727 |     sprintf(fore200e->name, "%s-%d", bus->model_name, index - 1); | 
 | 2728 |  | 
 | 2729 |     pci_set_master(pci_dev); | 
 | 2730 |  | 
 | 2731 |     printk(FORE200E "device %s found at 0x%lx, IRQ %s\n", | 
 | 2732 | 	   fore200e->bus->model_name,  | 
 | 2733 | 	   fore200e->phys_base, fore200e_irq_itoa(fore200e->irq)); | 
 | 2734 |  | 
 | 2735 |     sprintf(fore200e->name, "%s-%d", bus->model_name, index); | 
 | 2736 |  | 
 | 2737 |     err = fore200e_init(fore200e, &pci_dev->dev); | 
 | 2738 |     if (err < 0) { | 
 | 2739 | 	fore200e_shutdown(fore200e); | 
 | 2740 | 	goto out_free; | 
 | 2741 |     } | 
 | 2742 |  | 
 | 2743 |     ++index; | 
 | 2744 |     pci_set_drvdata(pci_dev, fore200e); | 
 | 2745 |  | 
 | 2746 | out: | 
 | 2747 |     return err; | 
 | 2748 |  | 
 | 2749 | out_free: | 
 | 2750 |     kfree(fore200e); | 
 | 2751 | out_disable: | 
 | 2752 |     pci_disable_device(pci_dev); | 
 | 2753 |     goto out; | 
 | 2754 | } | 
 | 2755 |  | 
 | 2756 |  | 
 | 2757 | static void fore200e_pca_remove_one(struct pci_dev *pci_dev) | 
 | 2758 | { | 
 | 2759 |     struct fore200e *fore200e; | 
 | 2760 |  | 
 | 2761 |     fore200e = pci_get_drvdata(pci_dev); | 
 | 2762 |  | 
 | 2763 |     fore200e_shutdown(fore200e); | 
 | 2764 |     kfree(fore200e); | 
 | 2765 |     pci_disable_device(pci_dev); | 
 | 2766 | } | 
 | 2767 |  | 
 | 2768 |  | 
 | 2769 | static const struct pci_device_id fore200e_pca_tbl[] = { | 
 | 2770 |     { PCI_VENDOR_ID_FORE, PCI_DEVICE_ID_FORE_PCA200E, PCI_ANY_ID, PCI_ANY_ID, | 
 | 2771 |       0, 0, (unsigned long) &fore200e_bus[0] }, | 
 | 2772 |     { 0, } | 
 | 2773 | }; | 
 | 2774 |  | 
 | 2775 | MODULE_DEVICE_TABLE(pci, fore200e_pca_tbl); | 
 | 2776 |  | 
 | 2777 | static struct pci_driver fore200e_pca_driver = { | 
 | 2778 |     .name =     "fore_200e", | 
 | 2779 |     .probe =    fore200e_pca_detect, | 
 | 2780 |     .remove =   fore200e_pca_remove_one, | 
 | 2781 |     .id_table = fore200e_pca_tbl, | 
 | 2782 | }; | 
 | 2783 | #endif | 
 | 2784 |  | 
 | 2785 | static int __init fore200e_module_init(void) | 
 | 2786 | { | 
 | 2787 | 	int err = 0; | 
 | 2788 |  | 
 | 2789 | 	printk(FORE200E "FORE Systems 200E-series ATM driver - version " FORE200E_VERSION "\n"); | 
 | 2790 |  | 
 | 2791 | #ifdef CONFIG_SBUS | 
 | 2792 | 	err = platform_driver_register(&fore200e_sba_driver); | 
 | 2793 | 	if (err) | 
 | 2794 | 		return err; | 
 | 2795 | #endif | 
 | 2796 |  | 
 | 2797 | #ifdef CONFIG_PCI | 
 | 2798 | 	err = pci_register_driver(&fore200e_pca_driver); | 
 | 2799 | #endif | 
 | 2800 |  | 
 | 2801 | #ifdef CONFIG_SBUS | 
 | 2802 | 	if (err) | 
 | 2803 | 		platform_driver_unregister(&fore200e_sba_driver); | 
 | 2804 | #endif | 
 | 2805 |  | 
 | 2806 | 	return err; | 
 | 2807 | } | 
 | 2808 |  | 
 | 2809 | static void __exit fore200e_module_cleanup(void) | 
 | 2810 | { | 
 | 2811 | #ifdef CONFIG_PCI | 
 | 2812 | 	pci_unregister_driver(&fore200e_pca_driver); | 
 | 2813 | #endif | 
 | 2814 | #ifdef CONFIG_SBUS | 
 | 2815 | 	platform_driver_unregister(&fore200e_sba_driver); | 
 | 2816 | #endif | 
 | 2817 | } | 
 | 2818 |  | 
 | 2819 | static int | 
 | 2820 | fore200e_proc_read(struct atm_dev *dev, loff_t* pos, char* page) | 
 | 2821 | { | 
 | 2822 |     struct fore200e*     fore200e  = FORE200E_DEV(dev); | 
 | 2823 |     struct fore200e_vcc* fore200e_vcc; | 
 | 2824 |     struct atm_vcc*      vcc; | 
 | 2825 |     int                  i, len, left = *pos; | 
 | 2826 |     unsigned long        flags; | 
 | 2827 |  | 
 | 2828 |     if (!left--) { | 
 | 2829 |  | 
 | 2830 | 	if (fore200e_getstats(fore200e) < 0) | 
 | 2831 | 	    return -EIO; | 
 | 2832 |  | 
 | 2833 | 	len = sprintf(page,"\n" | 
 | 2834 | 		       " device:\n" | 
 | 2835 | 		       "   internal name:\t\t%s\n", fore200e->name); | 
 | 2836 |  | 
 | 2837 | 	/* print bus-specific information */ | 
 | 2838 | 	if (fore200e->bus->proc_read) | 
 | 2839 | 	    len += fore200e->bus->proc_read(fore200e, page + len); | 
 | 2840 | 	 | 
 | 2841 | 	len += sprintf(page + len, | 
 | 2842 | 		"   interrupt line:\t\t%s\n" | 
 | 2843 | 		"   physical base address:\t0x%p\n" | 
 | 2844 | 		"   virtual base address:\t0x%p\n" | 
 | 2845 | 		"   factory address (ESI):\t%pM\n" | 
 | 2846 | 		"   board serial number:\t\t%d\n\n", | 
 | 2847 | 		fore200e_irq_itoa(fore200e->irq), | 
 | 2848 | 		(void*)fore200e->phys_base, | 
 | 2849 | 		fore200e->virt_base, | 
 | 2850 | 		fore200e->esi, | 
 | 2851 | 		fore200e->esi[4] * 256 + fore200e->esi[5]); | 
 | 2852 |  | 
 | 2853 | 	return len; | 
 | 2854 |     } | 
 | 2855 |  | 
 | 2856 |     if (!left--) | 
 | 2857 | 	return sprintf(page, | 
 | 2858 | 		       "   free small bufs, scheme 1:\t%d\n" | 
 | 2859 | 		       "   free large bufs, scheme 1:\t%d\n" | 
 | 2860 | 		       "   free small bufs, scheme 2:\t%d\n" | 
 | 2861 | 		       "   free large bufs, scheme 2:\t%d\n", | 
 | 2862 | 		       fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_SMALL ].freebuf_count, | 
 | 2863 | 		       fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_LARGE ].freebuf_count, | 
 | 2864 | 		       fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_SMALL ].freebuf_count, | 
 | 2865 | 		       fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_LARGE ].freebuf_count); | 
 | 2866 |  | 
 | 2867 |     if (!left--) { | 
 | 2868 | 	u32 hb = fore200e->bus->read(&fore200e->cp_queues->heartbeat); | 
 | 2869 |  | 
 | 2870 | 	len = sprintf(page,"\n\n" | 
 | 2871 | 		      " cell processor:\n" | 
 | 2872 | 		      "   heartbeat state:\t\t"); | 
 | 2873 | 	 | 
 | 2874 | 	if (hb >> 16 != 0xDEAD) | 
 | 2875 | 	    len += sprintf(page + len, "0x%08x\n", hb); | 
 | 2876 | 	else | 
 | 2877 | 	    len += sprintf(page + len, "*** FATAL ERROR %04x ***\n", hb & 0xFFFF); | 
 | 2878 |  | 
 | 2879 | 	return len; | 
 | 2880 |     } | 
 | 2881 |  | 
 | 2882 |     if (!left--) { | 
 | 2883 | 	static const char* media_name[] = { | 
 | 2884 | 	    "unshielded twisted pair", | 
 | 2885 | 	    "multimode optical fiber ST", | 
 | 2886 | 	    "multimode optical fiber SC", | 
 | 2887 | 	    "single-mode optical fiber ST", | 
 | 2888 | 	    "single-mode optical fiber SC", | 
 | 2889 | 	    "unknown" | 
 | 2890 | 	}; | 
 | 2891 |  | 
 | 2892 | 	static const char* oc3_mode[] = { | 
 | 2893 | 	    "normal operation", | 
 | 2894 | 	    "diagnostic loopback", | 
 | 2895 | 	    "line loopback", | 
 | 2896 | 	    "unknown" | 
 | 2897 | 	}; | 
 | 2898 |  | 
 | 2899 | 	u32 fw_release     = fore200e->bus->read(&fore200e->cp_queues->fw_release); | 
 | 2900 | 	u32 mon960_release = fore200e->bus->read(&fore200e->cp_queues->mon960_release); | 
 | 2901 | 	u32 oc3_revision   = fore200e->bus->read(&fore200e->cp_queues->oc3_revision); | 
 | 2902 | 	u32 media_index    = FORE200E_MEDIA_INDEX(fore200e->bus->read(&fore200e->cp_queues->media_type)); | 
 | 2903 | 	u32 oc3_index; | 
 | 2904 |  | 
 | 2905 | 	if (media_index > 4) | 
 | 2906 | 		media_index = 5; | 
 | 2907 | 	 | 
 | 2908 | 	switch (fore200e->loop_mode) { | 
 | 2909 | 	    case ATM_LM_NONE:    oc3_index = 0; | 
 | 2910 | 		                 break; | 
 | 2911 | 	    case ATM_LM_LOC_PHY: oc3_index = 1; | 
 | 2912 | 		                 break; | 
 | 2913 | 	    case ATM_LM_RMT_PHY: oc3_index = 2; | 
 | 2914 | 		                 break; | 
 | 2915 | 	    default:             oc3_index = 3; | 
 | 2916 | 	} | 
 | 2917 |  | 
 | 2918 | 	return sprintf(page, | 
 | 2919 | 		       "   firmware release:\t\t%d.%d.%d\n" | 
 | 2920 | 		       "   monitor release:\t\t%d.%d\n" | 
 | 2921 | 		       "   media type:\t\t\t%s\n" | 
 | 2922 | 		       "   OC-3 revision:\t\t0x%x\n" | 
 | 2923 |                        "   OC-3 mode:\t\t\t%s", | 
 | 2924 | 		       fw_release >> 16, fw_release << 16 >> 24,  fw_release << 24 >> 24, | 
 | 2925 | 		       mon960_release >> 16, mon960_release << 16 >> 16, | 
 | 2926 | 		       media_name[ media_index ], | 
 | 2927 | 		       oc3_revision, | 
 | 2928 | 		       oc3_mode[ oc3_index ]); | 
 | 2929 |     } | 
 | 2930 |  | 
 | 2931 |     if (!left--) { | 
 | 2932 | 	struct cp_monitor __iomem * cp_monitor = fore200e->cp_monitor; | 
 | 2933 |  | 
 | 2934 | 	return sprintf(page, | 
 | 2935 | 		       "\n\n" | 
 | 2936 | 		       " monitor:\n" | 
 | 2937 | 		       "   version number:\t\t%d\n" | 
 | 2938 | 		       "   boot status word:\t\t0x%08x\n", | 
 | 2939 | 		       fore200e->bus->read(&cp_monitor->mon_version), | 
 | 2940 | 		       fore200e->bus->read(&cp_monitor->bstat)); | 
 | 2941 |     } | 
 | 2942 |  | 
 | 2943 |     if (!left--) | 
 | 2944 | 	return sprintf(page, | 
 | 2945 | 		       "\n" | 
 | 2946 | 		       " device statistics:\n" | 
 | 2947 | 		       "  4b5b:\n" | 
 | 2948 | 		       "     crc_header_errors:\t\t%10u\n" | 
 | 2949 | 		       "     framing_errors:\t\t%10u\n", | 
 | 2950 | 		       be32_to_cpu(fore200e->stats->phy.crc_header_errors), | 
 | 2951 | 		       be32_to_cpu(fore200e->stats->phy.framing_errors)); | 
 | 2952 |      | 
 | 2953 |     if (!left--) | 
 | 2954 | 	return sprintf(page, "\n" | 
 | 2955 | 		       "  OC-3:\n" | 
 | 2956 | 		       "     section_bip8_errors:\t%10u\n" | 
 | 2957 | 		       "     path_bip8_errors:\t\t%10u\n" | 
 | 2958 | 		       "     line_bip24_errors:\t\t%10u\n" | 
 | 2959 | 		       "     line_febe_errors:\t\t%10u\n" | 
 | 2960 | 		       "     path_febe_errors:\t\t%10u\n" | 
 | 2961 | 		       "     corr_hcs_errors:\t\t%10u\n" | 
 | 2962 | 		       "     ucorr_hcs_errors:\t\t%10u\n", | 
 | 2963 | 		       be32_to_cpu(fore200e->stats->oc3.section_bip8_errors), | 
 | 2964 | 		       be32_to_cpu(fore200e->stats->oc3.path_bip8_errors), | 
 | 2965 | 		       be32_to_cpu(fore200e->stats->oc3.line_bip24_errors), | 
 | 2966 | 		       be32_to_cpu(fore200e->stats->oc3.line_febe_errors), | 
 | 2967 | 		       be32_to_cpu(fore200e->stats->oc3.path_febe_errors), | 
 | 2968 | 		       be32_to_cpu(fore200e->stats->oc3.corr_hcs_errors), | 
 | 2969 | 		       be32_to_cpu(fore200e->stats->oc3.ucorr_hcs_errors)); | 
 | 2970 |  | 
 | 2971 |     if (!left--) | 
 | 2972 | 	return sprintf(page,"\n" | 
 | 2973 | 		       "   ATM:\t\t\t\t     cells\n" | 
 | 2974 | 		       "     TX:\t\t\t%10u\n" | 
 | 2975 | 		       "     RX:\t\t\t%10u\n" | 
 | 2976 | 		       "     vpi out of range:\t\t%10u\n" | 
 | 2977 | 		       "     vpi no conn:\t\t%10u\n" | 
 | 2978 | 		       "     vci out of range:\t\t%10u\n" | 
 | 2979 | 		       "     vci no conn:\t\t%10u\n", | 
 | 2980 | 		       be32_to_cpu(fore200e->stats->atm.cells_transmitted), | 
 | 2981 | 		       be32_to_cpu(fore200e->stats->atm.cells_received), | 
 | 2982 | 		       be32_to_cpu(fore200e->stats->atm.vpi_bad_range), | 
 | 2983 | 		       be32_to_cpu(fore200e->stats->atm.vpi_no_conn), | 
 | 2984 | 		       be32_to_cpu(fore200e->stats->atm.vci_bad_range), | 
 | 2985 | 		       be32_to_cpu(fore200e->stats->atm.vci_no_conn)); | 
 | 2986 |      | 
 | 2987 |     if (!left--) | 
 | 2988 | 	return sprintf(page,"\n" | 
 | 2989 | 		       "   AAL0:\t\t\t     cells\n" | 
 | 2990 | 		       "     TX:\t\t\t%10u\n" | 
 | 2991 | 		       "     RX:\t\t\t%10u\n" | 
 | 2992 | 		       "     dropped:\t\t\t%10u\n", | 
 | 2993 | 		       be32_to_cpu(fore200e->stats->aal0.cells_transmitted), | 
 | 2994 | 		       be32_to_cpu(fore200e->stats->aal0.cells_received), | 
 | 2995 | 		       be32_to_cpu(fore200e->stats->aal0.cells_dropped)); | 
 | 2996 |      | 
 | 2997 |     if (!left--) | 
 | 2998 | 	return sprintf(page,"\n" | 
 | 2999 | 		       "   AAL3/4:\n" | 
 | 3000 | 		       "     SAR sublayer:\t\t     cells\n" | 
 | 3001 | 		       "       TX:\t\t\t%10u\n" | 
 | 3002 | 		       "       RX:\t\t\t%10u\n" | 
 | 3003 | 		       "       dropped:\t\t\t%10u\n" | 
 | 3004 | 		       "       CRC errors:\t\t%10u\n" | 
 | 3005 | 		       "       protocol errors:\t\t%10u\n\n" | 
 | 3006 | 		       "     CS  sublayer:\t\t      PDUs\n" | 
 | 3007 | 		       "       TX:\t\t\t%10u\n" | 
 | 3008 | 		       "       RX:\t\t\t%10u\n" | 
 | 3009 | 		       "       dropped:\t\t\t%10u\n" | 
 | 3010 | 		       "       protocol errors:\t\t%10u\n", | 
 | 3011 | 		       be32_to_cpu(fore200e->stats->aal34.cells_transmitted), | 
 | 3012 | 		       be32_to_cpu(fore200e->stats->aal34.cells_received), | 
 | 3013 | 		       be32_to_cpu(fore200e->stats->aal34.cells_dropped), | 
 | 3014 | 		       be32_to_cpu(fore200e->stats->aal34.cells_crc_errors), | 
 | 3015 | 		       be32_to_cpu(fore200e->stats->aal34.cells_protocol_errors), | 
 | 3016 | 		       be32_to_cpu(fore200e->stats->aal34.cspdus_transmitted), | 
 | 3017 | 		       be32_to_cpu(fore200e->stats->aal34.cspdus_received), | 
 | 3018 | 		       be32_to_cpu(fore200e->stats->aal34.cspdus_dropped), | 
 | 3019 | 		       be32_to_cpu(fore200e->stats->aal34.cspdus_protocol_errors)); | 
 | 3020 |      | 
 | 3021 |     if (!left--) | 
 | 3022 | 	return sprintf(page,"\n" | 
 | 3023 | 		       "   AAL5:\n" | 
 | 3024 | 		       "     SAR sublayer:\t\t     cells\n" | 
 | 3025 | 		       "       TX:\t\t\t%10u\n" | 
 | 3026 | 		       "       RX:\t\t\t%10u\n" | 
 | 3027 | 		       "       dropped:\t\t\t%10u\n" | 
 | 3028 | 		       "       congestions:\t\t%10u\n\n" | 
 | 3029 | 		       "     CS  sublayer:\t\t      PDUs\n" | 
 | 3030 | 		       "       TX:\t\t\t%10u\n" | 
 | 3031 | 		       "       RX:\t\t\t%10u\n" | 
 | 3032 | 		       "       dropped:\t\t\t%10u\n" | 
 | 3033 | 		       "       CRC errors:\t\t%10u\n" | 
 | 3034 | 		       "       protocol errors:\t\t%10u\n", | 
 | 3035 | 		       be32_to_cpu(fore200e->stats->aal5.cells_transmitted), | 
 | 3036 | 		       be32_to_cpu(fore200e->stats->aal5.cells_received), | 
 | 3037 | 		       be32_to_cpu(fore200e->stats->aal5.cells_dropped), | 
 | 3038 | 		       be32_to_cpu(fore200e->stats->aal5.congestion_experienced), | 
 | 3039 | 		       be32_to_cpu(fore200e->stats->aal5.cspdus_transmitted), | 
 | 3040 | 		       be32_to_cpu(fore200e->stats->aal5.cspdus_received), | 
 | 3041 | 		       be32_to_cpu(fore200e->stats->aal5.cspdus_dropped), | 
 | 3042 | 		       be32_to_cpu(fore200e->stats->aal5.cspdus_crc_errors), | 
 | 3043 | 		       be32_to_cpu(fore200e->stats->aal5.cspdus_protocol_errors)); | 
 | 3044 |      | 
 | 3045 |     if (!left--) | 
 | 3046 | 	return sprintf(page,"\n" | 
 | 3047 | 		       "   AUX:\t\t       allocation failures\n" | 
 | 3048 | 		       "     small b1:\t\t\t%10u\n" | 
 | 3049 | 		       "     large b1:\t\t\t%10u\n" | 
 | 3050 | 		       "     small b2:\t\t\t%10u\n" | 
 | 3051 | 		       "     large b2:\t\t\t%10u\n" | 
 | 3052 | 		       "     RX PDUs:\t\t\t%10u\n" | 
 | 3053 | 		       "     TX PDUs:\t\t\t%10lu\n", | 
 | 3054 | 		       be32_to_cpu(fore200e->stats->aux.small_b1_failed), | 
 | 3055 | 		       be32_to_cpu(fore200e->stats->aux.large_b1_failed), | 
 | 3056 | 		       be32_to_cpu(fore200e->stats->aux.small_b2_failed), | 
 | 3057 | 		       be32_to_cpu(fore200e->stats->aux.large_b2_failed), | 
 | 3058 | 		       be32_to_cpu(fore200e->stats->aux.rpd_alloc_failed), | 
 | 3059 | 		       fore200e->tx_sat); | 
 | 3060 |      | 
 | 3061 |     if (!left--) | 
 | 3062 | 	return sprintf(page,"\n" | 
 | 3063 | 		       " receive carrier:\t\t\t%s\n", | 
 | 3064 | 		       fore200e->stats->aux.receive_carrier ? "ON" : "OFF!"); | 
 | 3065 |      | 
 | 3066 |     if (!left--) { | 
 | 3067 |         return sprintf(page,"\n" | 
 | 3068 | 		       " VCCs:\n  address   VPI VCI   AAL " | 
 | 3069 | 		       "TX PDUs   TX min/max size  RX PDUs   RX min/max size\n"); | 
 | 3070 |     } | 
 | 3071 |  | 
 | 3072 |     for (i = 0; i < NBR_CONNECT; i++) { | 
 | 3073 |  | 
 | 3074 | 	vcc = fore200e->vc_map[i].vcc; | 
 | 3075 |  | 
 | 3076 | 	if (vcc == NULL) | 
 | 3077 | 	    continue; | 
 | 3078 |  | 
 | 3079 | 	spin_lock_irqsave(&fore200e->q_lock, flags); | 
 | 3080 |  | 
 | 3081 | 	if (vcc && test_bit(ATM_VF_READY, &vcc->flags) && !left--) { | 
 | 3082 |  | 
 | 3083 | 	    fore200e_vcc = FORE200E_VCC(vcc); | 
 | 3084 | 	    ASSERT(fore200e_vcc); | 
 | 3085 |  | 
 | 3086 | 	    len = sprintf(page, | 
 | 3087 | 			  "  %pK  %03d %05d %1d   %09lu %05d/%05d      %09lu %05d/%05d\n", | 
 | 3088 | 			  vcc, | 
 | 3089 | 			  vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
 | 3090 | 			  fore200e_vcc->tx_pdu, | 
 | 3091 | 			  fore200e_vcc->tx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->tx_min_pdu, | 
 | 3092 | 			  fore200e_vcc->tx_max_pdu, | 
 | 3093 | 			  fore200e_vcc->rx_pdu, | 
 | 3094 | 			  fore200e_vcc->rx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->rx_min_pdu, | 
 | 3095 | 			  fore200e_vcc->rx_max_pdu); | 
 | 3096 |  | 
 | 3097 | 	    spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 3098 | 	    return len; | 
 | 3099 | 	} | 
 | 3100 |  | 
 | 3101 | 	spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
 | 3102 |     } | 
 | 3103 |      | 
 | 3104 |     return 0; | 
 | 3105 | } | 
 | 3106 |  | 
 | 3107 | module_init(fore200e_module_init); | 
 | 3108 | module_exit(fore200e_module_cleanup); | 
 | 3109 |  | 
 | 3110 |  | 
 | 3111 | static const struct atmdev_ops fore200e_ops = | 
 | 3112 | { | 
 | 3113 | 	.open       = fore200e_open, | 
 | 3114 | 	.close      = fore200e_close, | 
 | 3115 | 	.ioctl      = fore200e_ioctl, | 
 | 3116 | 	.getsockopt = fore200e_getsockopt, | 
 | 3117 | 	.setsockopt = fore200e_setsockopt, | 
 | 3118 | 	.send       = fore200e_send, | 
 | 3119 | 	.change_qos = fore200e_change_qos, | 
 | 3120 | 	.proc_read  = fore200e_proc_read, | 
 | 3121 | 	.owner      = THIS_MODULE | 
 | 3122 | }; | 
 | 3123 |  | 
 | 3124 |  | 
 | 3125 | static const struct fore200e_bus fore200e_bus[] = { | 
 | 3126 | #ifdef CONFIG_PCI | 
 | 3127 |     { "PCA-200E", "pca200e", 32, 4, 32,  | 
 | 3128 |       fore200e_pca_read, | 
 | 3129 |       fore200e_pca_write, | 
 | 3130 |       fore200e_pca_dma_map, | 
 | 3131 |       fore200e_pca_dma_unmap, | 
 | 3132 |       fore200e_pca_dma_sync_for_cpu, | 
 | 3133 |       fore200e_pca_dma_sync_for_device, | 
 | 3134 |       fore200e_pca_dma_chunk_alloc, | 
 | 3135 |       fore200e_pca_dma_chunk_free, | 
 | 3136 |       fore200e_pca_configure, | 
 | 3137 |       fore200e_pca_map, | 
 | 3138 |       fore200e_pca_reset, | 
 | 3139 |       fore200e_pca_prom_read, | 
 | 3140 |       fore200e_pca_unmap, | 
 | 3141 |       NULL, | 
 | 3142 |       fore200e_pca_irq_check, | 
 | 3143 |       fore200e_pca_irq_ack, | 
 | 3144 |       fore200e_pca_proc_read, | 
 | 3145 |     }, | 
 | 3146 | #endif | 
 | 3147 | #ifdef CONFIG_SBUS | 
 | 3148 |     { "SBA-200E", "sba200e", 32, 64, 32, | 
 | 3149 |       fore200e_sba_read, | 
 | 3150 |       fore200e_sba_write, | 
 | 3151 |       fore200e_sba_dma_map, | 
 | 3152 |       fore200e_sba_dma_unmap, | 
 | 3153 |       fore200e_sba_dma_sync_for_cpu, | 
 | 3154 |       fore200e_sba_dma_sync_for_device, | 
 | 3155 |       fore200e_sba_dma_chunk_alloc, | 
 | 3156 |       fore200e_sba_dma_chunk_free, | 
 | 3157 |       fore200e_sba_configure, | 
 | 3158 |       fore200e_sba_map, | 
 | 3159 |       fore200e_sba_reset, | 
 | 3160 |       fore200e_sba_prom_read, | 
 | 3161 |       fore200e_sba_unmap, | 
 | 3162 |       fore200e_sba_irq_enable, | 
 | 3163 |       fore200e_sba_irq_check, | 
 | 3164 |       fore200e_sba_irq_ack, | 
 | 3165 |       fore200e_sba_proc_read, | 
 | 3166 |     }, | 
 | 3167 | #endif | 
 | 3168 |     {} | 
 | 3169 | }; | 
 | 3170 |  | 
 | 3171 | MODULE_LICENSE("GPL"); | 
 | 3172 | #ifdef CONFIG_PCI | 
 | 3173 | #ifdef __LITTLE_ENDIAN__ | 
 | 3174 | MODULE_FIRMWARE("pca200e.bin"); | 
 | 3175 | #else | 
 | 3176 | MODULE_FIRMWARE("pca200e_ecd.bin2"); | 
 | 3177 | #endif | 
 | 3178 | #endif /* CONFIG_PCI */ | 
 | 3179 | #ifdef CONFIG_SBUS | 
 | 3180 | MODULE_FIRMWARE("sba200e_ecd.bin2"); | 
 | 3181 | #endif |