| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* Texas Instruments TMP108 SMBus temperature sensor driver | 
|  | 2 | * | 
|  | 3 | * Copyright (C) 2016 John Muir <john@jmuir.com> | 
|  | 4 | * | 
|  | 5 | * This program is free software; you can redistribute it and/or modify | 
|  | 6 | * it under the terms of the GNU General Public License as published by | 
|  | 7 | * the Free Software Foundation; either version 2 of the License, or | 
|  | 8 | * (at your option) any later version. | 
|  | 9 | * | 
|  | 10 | * This program is distributed in the hope that it will be useful, | 
|  | 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 13 | * GNU General Public License for more details. | 
|  | 14 | */ | 
|  | 15 |  | 
|  | 16 | #include <linux/delay.h> | 
|  | 17 | #include <linux/device.h> | 
|  | 18 | #include <linux/err.h> | 
|  | 19 | #include <linux/hwmon.h> | 
|  | 20 | #include <linux/hwmon-sysfs.h> | 
|  | 21 | #include <linux/module.h> | 
|  | 22 | #include <linux/mutex.h> | 
|  | 23 | #include <linux/of.h> | 
|  | 24 | #include <linux/i2c.h> | 
|  | 25 | #include <linux/init.h> | 
|  | 26 | #include <linux/jiffies.h> | 
|  | 27 | #include <linux/regmap.h> | 
|  | 28 | #include <linux/slab.h> | 
|  | 29 |  | 
|  | 30 | #define	DRIVER_NAME "tmp108" | 
|  | 31 |  | 
|  | 32 | #define	TMP108_REG_TEMP		0x00 | 
|  | 33 | #define	TMP108_REG_CONF		0x01 | 
|  | 34 | #define	TMP108_REG_TLOW		0x02 | 
|  | 35 | #define	TMP108_REG_THIGH	0x03 | 
|  | 36 |  | 
|  | 37 | #define TMP108_TEMP_MIN_MC	-50000 /* Minimum millicelcius. */ | 
|  | 38 | #define TMP108_TEMP_MAX_MC	127937 /* Maximum millicelcius. */ | 
|  | 39 |  | 
|  | 40 | /* Configuration register bits. | 
|  | 41 | * Note: these bit definitions are byte swapped. | 
|  | 42 | */ | 
|  | 43 | #define TMP108_CONF_M0		0x0100 /* Sensor mode. */ | 
|  | 44 | #define TMP108_CONF_M1		0x0200 | 
|  | 45 | #define TMP108_CONF_TM		0x0400 /* Thermostat mode. */ | 
|  | 46 | #define TMP108_CONF_FL		0x0800 /* Watchdog flag - TLOW */ | 
|  | 47 | #define TMP108_CONF_FH		0x1000 /* Watchdog flag - THIGH */ | 
|  | 48 | #define TMP108_CONF_CR0		0x2000 /* Conversion rate. */ | 
|  | 49 | #define TMP108_CONF_CR1		0x4000 | 
|  | 50 | #define TMP108_CONF_ID		0x8000 | 
|  | 51 | #define TMP108_CONF_HYS0	0x0010 /* Hysteresis. */ | 
|  | 52 | #define TMP108_CONF_HYS1	0x0020 | 
|  | 53 | #define TMP108_CONF_POL		0x0080 /* Polarity of alert. */ | 
|  | 54 |  | 
|  | 55 | /* Defaults set by the hardware upon reset. */ | 
|  | 56 | #define TMP108_CONF_DEFAULTS		(TMP108_CONF_CR0 | TMP108_CONF_TM |\ | 
|  | 57 | TMP108_CONF_HYS0 | TMP108_CONF_M1) | 
|  | 58 | /* These bits are read-only. */ | 
|  | 59 | #define TMP108_CONF_READ_ONLY		(TMP108_CONF_FL | TMP108_CONF_FH |\ | 
|  | 60 | TMP108_CONF_ID) | 
|  | 61 |  | 
|  | 62 | #define TMP108_CONF_MODE_MASK		(TMP108_CONF_M0|TMP108_CONF_M1) | 
|  | 63 | #define TMP108_MODE_SHUTDOWN		0x0000 | 
|  | 64 | #define TMP108_MODE_ONE_SHOT		TMP108_CONF_M0 | 
|  | 65 | #define TMP108_MODE_CONTINUOUS		TMP108_CONF_M1		/* Default */ | 
|  | 66 | /* When M1 is set, M0 is ignored. */ | 
|  | 67 |  | 
|  | 68 | #define TMP108_CONF_CONVRATE_MASK	(TMP108_CONF_CR0|TMP108_CONF_CR1) | 
|  | 69 | #define TMP108_CONVRATE_0P25HZ		0x0000 | 
|  | 70 | #define TMP108_CONVRATE_1HZ		TMP108_CONF_CR0		/* Default */ | 
|  | 71 | #define TMP108_CONVRATE_4HZ		TMP108_CONF_CR1 | 
|  | 72 | #define TMP108_CONVRATE_16HZ		(TMP108_CONF_CR0|TMP108_CONF_CR1) | 
|  | 73 |  | 
|  | 74 | #define TMP108_CONF_HYSTERESIS_MASK	(TMP108_CONF_HYS0|TMP108_CONF_HYS1) | 
|  | 75 | #define TMP108_HYSTERESIS_0C		0x0000 | 
|  | 76 | #define TMP108_HYSTERESIS_1C		TMP108_CONF_HYS0	/* Default */ | 
|  | 77 | #define TMP108_HYSTERESIS_2C		TMP108_CONF_HYS1 | 
|  | 78 | #define TMP108_HYSTERESIS_4C		(TMP108_CONF_HYS0|TMP108_CONF_HYS1) | 
|  | 79 |  | 
|  | 80 | #define TMP108_CONVERSION_TIME_MS	30	/* in milli-seconds */ | 
|  | 81 |  | 
|  | 82 | struct tmp108 { | 
|  | 83 | struct regmap *regmap; | 
|  | 84 | u16 orig_config; | 
|  | 85 | unsigned long ready_time; | 
|  | 86 | }; | 
|  | 87 |  | 
|  | 88 | /* convert 12-bit TMP108 register value to milliCelsius */ | 
|  | 89 | static inline int tmp108_temp_reg_to_mC(s16 val) | 
|  | 90 | { | 
|  | 91 | return (val & ~0x0f) * 1000 / 256; | 
|  | 92 | } | 
|  | 93 |  | 
|  | 94 | /* convert milliCelsius to left adjusted 12-bit TMP108 register value */ | 
|  | 95 | static inline u16 tmp108_mC_to_temp_reg(int val) | 
|  | 96 | { | 
|  | 97 | return (val * 256) / 1000; | 
|  | 98 | } | 
|  | 99 |  | 
|  | 100 | static int tmp108_read(struct device *dev, enum hwmon_sensor_types type, | 
|  | 101 | u32 attr, int channel, long *temp) | 
|  | 102 | { | 
|  | 103 | struct tmp108 *tmp108 = dev_get_drvdata(dev); | 
|  | 104 | unsigned int regval; | 
|  | 105 | int err, hyst; | 
|  | 106 |  | 
|  | 107 | if (type == hwmon_chip) { | 
|  | 108 | if (attr == hwmon_chip_update_interval) { | 
|  | 109 | err = regmap_read(tmp108->regmap, TMP108_REG_CONF, | 
|  | 110 | ®val); | 
|  | 111 | if (err < 0) | 
|  | 112 | return err; | 
|  | 113 | switch (regval & TMP108_CONF_CONVRATE_MASK) { | 
|  | 114 | case TMP108_CONVRATE_0P25HZ: | 
|  | 115 | default: | 
|  | 116 | *temp = 4000; | 
|  | 117 | break; | 
|  | 118 | case TMP108_CONVRATE_1HZ: | 
|  | 119 | *temp = 1000; | 
|  | 120 | break; | 
|  | 121 | case TMP108_CONVRATE_4HZ: | 
|  | 122 | *temp = 250; | 
|  | 123 | break; | 
|  | 124 | case TMP108_CONVRATE_16HZ: | 
|  | 125 | *temp = 63; | 
|  | 126 | break; | 
|  | 127 | } | 
|  | 128 | return 0; | 
|  | 129 | } | 
|  | 130 | return -EOPNOTSUPP; | 
|  | 131 | } | 
|  | 132 |  | 
|  | 133 | switch (attr) { | 
|  | 134 | case hwmon_temp_input: | 
|  | 135 | /* Is it too early to return a conversion ? */ | 
|  | 136 | if (time_before(jiffies, tmp108->ready_time)) { | 
|  | 137 | dev_dbg(dev, "%s: Conversion not ready yet..\n", | 
|  | 138 | __func__); | 
|  | 139 | return -EAGAIN; | 
|  | 140 | } | 
|  | 141 | err = regmap_read(tmp108->regmap, TMP108_REG_TEMP, ®val); | 
|  | 142 | if (err < 0) | 
|  | 143 | return err; | 
|  | 144 | *temp = tmp108_temp_reg_to_mC(regval); | 
|  | 145 | break; | 
|  | 146 | case hwmon_temp_min: | 
|  | 147 | case hwmon_temp_max: | 
|  | 148 | err = regmap_read(tmp108->regmap, attr == hwmon_temp_min ? | 
|  | 149 | TMP108_REG_TLOW : TMP108_REG_THIGH, ®val); | 
|  | 150 | if (err < 0) | 
|  | 151 | return err; | 
|  | 152 | *temp = tmp108_temp_reg_to_mC(regval); | 
|  | 153 | break; | 
|  | 154 | case hwmon_temp_min_alarm: | 
|  | 155 | case hwmon_temp_max_alarm: | 
|  | 156 | err = regmap_read(tmp108->regmap, TMP108_REG_CONF, ®val); | 
|  | 157 | if (err < 0) | 
|  | 158 | return err; | 
|  | 159 | *temp = !!(regval & (attr == hwmon_temp_min_alarm ? | 
|  | 160 | TMP108_CONF_FL : TMP108_CONF_FH)); | 
|  | 161 | break; | 
|  | 162 | case hwmon_temp_min_hyst: | 
|  | 163 | case hwmon_temp_max_hyst: | 
|  | 164 | err = regmap_read(tmp108->regmap, TMP108_REG_CONF, ®val); | 
|  | 165 | if (err < 0) | 
|  | 166 | return err; | 
|  | 167 | switch (regval & TMP108_CONF_HYSTERESIS_MASK) { | 
|  | 168 | case TMP108_HYSTERESIS_0C: | 
|  | 169 | default: | 
|  | 170 | hyst = 0; | 
|  | 171 | break; | 
|  | 172 | case TMP108_HYSTERESIS_1C: | 
|  | 173 | hyst = 1000; | 
|  | 174 | break; | 
|  | 175 | case TMP108_HYSTERESIS_2C: | 
|  | 176 | hyst = 2000; | 
|  | 177 | break; | 
|  | 178 | case TMP108_HYSTERESIS_4C: | 
|  | 179 | hyst = 4000; | 
|  | 180 | break; | 
|  | 181 | } | 
|  | 182 | err = regmap_read(tmp108->regmap, attr == hwmon_temp_min_hyst ? | 
|  | 183 | TMP108_REG_TLOW : TMP108_REG_THIGH, ®val); | 
|  | 184 | if (err < 0) | 
|  | 185 | return err; | 
|  | 186 | *temp = tmp108_temp_reg_to_mC(regval); | 
|  | 187 | if (attr == hwmon_temp_min_hyst) | 
|  | 188 | *temp += hyst; | 
|  | 189 | else | 
|  | 190 | *temp -= hyst; | 
|  | 191 | break; | 
|  | 192 | default: | 
|  | 193 | return -EOPNOTSUPP; | 
|  | 194 | } | 
|  | 195 |  | 
|  | 196 | return 0; | 
|  | 197 | } | 
|  | 198 |  | 
|  | 199 | static int tmp108_write(struct device *dev, enum hwmon_sensor_types type, | 
|  | 200 | u32 attr, int channel, long temp) | 
|  | 201 | { | 
|  | 202 | struct tmp108 *tmp108 = dev_get_drvdata(dev); | 
|  | 203 | u32 regval, mask; | 
|  | 204 | int err; | 
|  | 205 |  | 
|  | 206 | if (type == hwmon_chip) { | 
|  | 207 | if (attr == hwmon_chip_update_interval) { | 
|  | 208 | if (temp < 156) | 
|  | 209 | mask = TMP108_CONVRATE_16HZ; | 
|  | 210 | else if (temp < 625) | 
|  | 211 | mask = TMP108_CONVRATE_4HZ; | 
|  | 212 | else if (temp < 2500) | 
|  | 213 | mask = TMP108_CONVRATE_1HZ; | 
|  | 214 | else | 
|  | 215 | mask = TMP108_CONVRATE_0P25HZ; | 
|  | 216 | return regmap_update_bits(tmp108->regmap, | 
|  | 217 | TMP108_REG_CONF, | 
|  | 218 | TMP108_CONF_CONVRATE_MASK, | 
|  | 219 | mask); | 
|  | 220 | } | 
|  | 221 | return -EOPNOTSUPP; | 
|  | 222 | } | 
|  | 223 |  | 
|  | 224 | switch (attr) { | 
|  | 225 | case hwmon_temp_min: | 
|  | 226 | case hwmon_temp_max: | 
|  | 227 | temp = clamp_val(temp, TMP108_TEMP_MIN_MC, TMP108_TEMP_MAX_MC); | 
|  | 228 | return regmap_write(tmp108->regmap, | 
|  | 229 | attr == hwmon_temp_min ? | 
|  | 230 | TMP108_REG_TLOW : TMP108_REG_THIGH, | 
|  | 231 | tmp108_mC_to_temp_reg(temp)); | 
|  | 232 | case hwmon_temp_min_hyst: | 
|  | 233 | case hwmon_temp_max_hyst: | 
|  | 234 | temp = clamp_val(temp, TMP108_TEMP_MIN_MC, TMP108_TEMP_MAX_MC); | 
|  | 235 | err = regmap_read(tmp108->regmap, | 
|  | 236 | attr == hwmon_temp_min_hyst ? | 
|  | 237 | TMP108_REG_TLOW : TMP108_REG_THIGH, | 
|  | 238 | ®val); | 
|  | 239 | if (err < 0) | 
|  | 240 | return err; | 
|  | 241 | if (attr == hwmon_temp_min_hyst) | 
|  | 242 | temp -= tmp108_temp_reg_to_mC(regval); | 
|  | 243 | else | 
|  | 244 | temp = tmp108_temp_reg_to_mC(regval) - temp; | 
|  | 245 | if (temp < 500) | 
|  | 246 | mask = TMP108_HYSTERESIS_0C; | 
|  | 247 | else if (temp < 1500) | 
|  | 248 | mask = TMP108_HYSTERESIS_1C; | 
|  | 249 | else if (temp < 3000) | 
|  | 250 | mask = TMP108_HYSTERESIS_2C; | 
|  | 251 | else | 
|  | 252 | mask = TMP108_HYSTERESIS_4C; | 
|  | 253 | return regmap_update_bits(tmp108->regmap, TMP108_REG_CONF, | 
|  | 254 | TMP108_CONF_HYSTERESIS_MASK, mask); | 
|  | 255 | default: | 
|  | 256 | return -EOPNOTSUPP; | 
|  | 257 | } | 
|  | 258 | } | 
|  | 259 |  | 
|  | 260 | static umode_t tmp108_is_visible(const void *data, enum hwmon_sensor_types type, | 
|  | 261 | u32 attr, int channel) | 
|  | 262 | { | 
|  | 263 | if (type == hwmon_chip && attr == hwmon_chip_update_interval) | 
|  | 264 | return 0644; | 
|  | 265 |  | 
|  | 266 | if (type != hwmon_temp) | 
|  | 267 | return 0; | 
|  | 268 |  | 
|  | 269 | switch (attr) { | 
|  | 270 | case hwmon_temp_input: | 
|  | 271 | case hwmon_temp_min_alarm: | 
|  | 272 | case hwmon_temp_max_alarm: | 
|  | 273 | return 0444; | 
|  | 274 | case hwmon_temp_min: | 
|  | 275 | case hwmon_temp_max: | 
|  | 276 | case hwmon_temp_min_hyst: | 
|  | 277 | case hwmon_temp_max_hyst: | 
|  | 278 | return 0644; | 
|  | 279 | default: | 
|  | 280 | return 0; | 
|  | 281 | } | 
|  | 282 | } | 
|  | 283 |  | 
|  | 284 | static u32 tmp108_chip_config[] = { | 
|  | 285 | HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL, | 
|  | 286 | 0 | 
|  | 287 | }; | 
|  | 288 |  | 
|  | 289 | static const struct hwmon_channel_info tmp108_chip = { | 
|  | 290 | .type = hwmon_chip, | 
|  | 291 | .config = tmp108_chip_config, | 
|  | 292 | }; | 
|  | 293 |  | 
|  | 294 | static u32 tmp108_temp_config[] = { | 
|  | 295 | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | HWMON_T_MIN_HYST | 
|  | 296 | | HWMON_T_MAX_HYST | HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM, | 
|  | 297 | 0 | 
|  | 298 | }; | 
|  | 299 |  | 
|  | 300 | static const struct hwmon_channel_info tmp108_temp = { | 
|  | 301 | .type = hwmon_temp, | 
|  | 302 | .config = tmp108_temp_config, | 
|  | 303 | }; | 
|  | 304 |  | 
|  | 305 | static const struct hwmon_channel_info *tmp108_info[] = { | 
|  | 306 | &tmp108_chip, | 
|  | 307 | &tmp108_temp, | 
|  | 308 | NULL | 
|  | 309 | }; | 
|  | 310 |  | 
|  | 311 | static const struct hwmon_ops tmp108_hwmon_ops = { | 
|  | 312 | .is_visible = tmp108_is_visible, | 
|  | 313 | .read = tmp108_read, | 
|  | 314 | .write = tmp108_write, | 
|  | 315 | }; | 
|  | 316 |  | 
|  | 317 | static const struct hwmon_chip_info tmp108_chip_info = { | 
|  | 318 | .ops = &tmp108_hwmon_ops, | 
|  | 319 | .info = tmp108_info, | 
|  | 320 | }; | 
|  | 321 |  | 
|  | 322 | static void tmp108_restore_config(void *data) | 
|  | 323 | { | 
|  | 324 | struct tmp108 *tmp108 = data; | 
|  | 325 |  | 
|  | 326 | regmap_write(tmp108->regmap, TMP108_REG_CONF, tmp108->orig_config); | 
|  | 327 | } | 
|  | 328 |  | 
|  | 329 | static bool tmp108_is_writeable_reg(struct device *dev, unsigned int reg) | 
|  | 330 | { | 
|  | 331 | return reg != TMP108_REG_TEMP; | 
|  | 332 | } | 
|  | 333 |  | 
|  | 334 | static bool tmp108_is_volatile_reg(struct device *dev, unsigned int reg) | 
|  | 335 | { | 
|  | 336 | /* Configuration register must be volatile to enable FL and FH. */ | 
|  | 337 | return reg == TMP108_REG_TEMP || reg == TMP108_REG_CONF; | 
|  | 338 | } | 
|  | 339 |  | 
|  | 340 | static const struct regmap_config tmp108_regmap_config = { | 
|  | 341 | .reg_bits = 8, | 
|  | 342 | .val_bits = 16, | 
|  | 343 | .max_register = TMP108_REG_THIGH, | 
|  | 344 | .writeable_reg = tmp108_is_writeable_reg, | 
|  | 345 | .volatile_reg = tmp108_is_volatile_reg, | 
|  | 346 | .val_format_endian = REGMAP_ENDIAN_BIG, | 
|  | 347 | .cache_type = REGCACHE_RBTREE, | 
|  | 348 | .use_single_rw = true, | 
|  | 349 | }; | 
|  | 350 |  | 
|  | 351 | static int tmp108_probe(struct i2c_client *client, | 
|  | 352 | const struct i2c_device_id *id) | 
|  | 353 | { | 
|  | 354 | struct device *dev = &client->dev; | 
|  | 355 | struct device *hwmon_dev; | 
|  | 356 | struct tmp108 *tmp108; | 
|  | 357 | int err; | 
|  | 358 | u32 config; | 
|  | 359 |  | 
|  | 360 | if (!i2c_check_functionality(client->adapter, | 
|  | 361 | I2C_FUNC_SMBUS_WORD_DATA)) { | 
|  | 362 | dev_err(dev, | 
|  | 363 | "adapter doesn't support SMBus word transactions\n"); | 
|  | 364 | return -ENODEV; | 
|  | 365 | } | 
|  | 366 |  | 
|  | 367 | tmp108 = devm_kzalloc(dev, sizeof(*tmp108), GFP_KERNEL); | 
|  | 368 | if (!tmp108) | 
|  | 369 | return -ENOMEM; | 
|  | 370 |  | 
|  | 371 | dev_set_drvdata(dev, tmp108); | 
|  | 372 |  | 
|  | 373 | tmp108->regmap = devm_regmap_init_i2c(client, &tmp108_regmap_config); | 
|  | 374 | if (IS_ERR(tmp108->regmap)) { | 
|  | 375 | err = PTR_ERR(tmp108->regmap); | 
|  | 376 | dev_err(dev, "regmap init failed: %d", err); | 
|  | 377 | return err; | 
|  | 378 | } | 
|  | 379 |  | 
|  | 380 | err = regmap_read(tmp108->regmap, TMP108_REG_CONF, &config); | 
|  | 381 | if (err < 0) { | 
|  | 382 | dev_err(dev, "error reading config register: %d", err); | 
|  | 383 | return err; | 
|  | 384 | } | 
|  | 385 | tmp108->orig_config = config; | 
|  | 386 |  | 
|  | 387 | /* Only continuous mode is supported. */ | 
|  | 388 | config &= ~TMP108_CONF_MODE_MASK; | 
|  | 389 | config |= TMP108_MODE_CONTINUOUS; | 
|  | 390 |  | 
|  | 391 | /* Only comparator mode is supported. */ | 
|  | 392 | config &= ~TMP108_CONF_TM; | 
|  | 393 |  | 
|  | 394 | err = regmap_write(tmp108->regmap, TMP108_REG_CONF, config); | 
|  | 395 | if (err < 0) { | 
|  | 396 | dev_err(dev, "error writing config register: %d", err); | 
|  | 397 | return err; | 
|  | 398 | } | 
|  | 399 |  | 
|  | 400 | tmp108->ready_time = jiffies; | 
|  | 401 | if ((tmp108->orig_config & TMP108_CONF_MODE_MASK) == | 
|  | 402 | TMP108_MODE_SHUTDOWN) | 
|  | 403 | tmp108->ready_time += | 
|  | 404 | msecs_to_jiffies(TMP108_CONVERSION_TIME_MS); | 
|  | 405 |  | 
|  | 406 | err = devm_add_action_or_reset(dev, tmp108_restore_config, tmp108); | 
|  | 407 | if (err) { | 
|  | 408 | dev_err(dev, "add action or reset failed: %d", err); | 
|  | 409 | return err; | 
|  | 410 | } | 
|  | 411 |  | 
|  | 412 | hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, | 
|  | 413 | tmp108, | 
|  | 414 | &tmp108_chip_info, | 
|  | 415 | NULL); | 
|  | 416 | return PTR_ERR_OR_ZERO(hwmon_dev); | 
|  | 417 | } | 
|  | 418 |  | 
|  | 419 | static int __maybe_unused tmp108_suspend(struct device *dev) | 
|  | 420 | { | 
|  | 421 | struct tmp108 *tmp108 = dev_get_drvdata(dev); | 
|  | 422 |  | 
|  | 423 | return regmap_update_bits(tmp108->regmap, TMP108_REG_CONF, | 
|  | 424 | TMP108_CONF_MODE_MASK, TMP108_MODE_SHUTDOWN); | 
|  | 425 | } | 
|  | 426 |  | 
|  | 427 | static int __maybe_unused tmp108_resume(struct device *dev) | 
|  | 428 | { | 
|  | 429 | struct tmp108 *tmp108 = dev_get_drvdata(dev); | 
|  | 430 | int err; | 
|  | 431 |  | 
|  | 432 | err = regmap_update_bits(tmp108->regmap, TMP108_REG_CONF, | 
|  | 433 | TMP108_CONF_MODE_MASK, TMP108_MODE_CONTINUOUS); | 
|  | 434 | tmp108->ready_time = jiffies + | 
|  | 435 | msecs_to_jiffies(TMP108_CONVERSION_TIME_MS); | 
|  | 436 | return err; | 
|  | 437 | } | 
|  | 438 |  | 
|  | 439 | static SIMPLE_DEV_PM_OPS(tmp108_dev_pm_ops, tmp108_suspend, tmp108_resume); | 
|  | 440 |  | 
|  | 441 | static const struct i2c_device_id tmp108_i2c_ids[] = { | 
|  | 442 | { "tmp108", 0 }, | 
|  | 443 | { } | 
|  | 444 | }; | 
|  | 445 | MODULE_DEVICE_TABLE(i2c, tmp108_i2c_ids); | 
|  | 446 |  | 
|  | 447 | #ifdef CONFIG_OF | 
|  | 448 | static const struct of_device_id tmp108_of_ids[] = { | 
|  | 449 | { .compatible = "ti,tmp108", }, | 
|  | 450 | {} | 
|  | 451 | }; | 
|  | 452 | MODULE_DEVICE_TABLE(of, tmp108_of_ids); | 
|  | 453 | #endif | 
|  | 454 |  | 
|  | 455 | static struct i2c_driver tmp108_driver = { | 
|  | 456 | .driver = { | 
|  | 457 | .name	= DRIVER_NAME, | 
|  | 458 | .pm	= &tmp108_dev_pm_ops, | 
|  | 459 | .of_match_table = of_match_ptr(tmp108_of_ids), | 
|  | 460 | }, | 
|  | 461 | .probe		= tmp108_probe, | 
|  | 462 | .id_table	= tmp108_i2c_ids, | 
|  | 463 | }; | 
|  | 464 |  | 
|  | 465 | module_i2c_driver(tmp108_driver); | 
|  | 466 |  | 
|  | 467 | MODULE_AUTHOR("John Muir <john@jmuir.com>"); | 
|  | 468 | MODULE_DESCRIPTION("Texas Instruments TMP108 temperature sensor driver"); | 
|  | 469 | MODULE_LICENSE("GPL"); |