| xj | b04a402 | 2021-11-25 15:01:52 +0800 | [diff] [blame] | 1 | /* | 
|  | 2 | * EBI driver for Atmel chips | 
|  | 3 | * inspired by the fsl weim bus driver | 
|  | 4 | * | 
|  | 5 | * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> | 
|  | 6 | * | 
|  | 7 | * This file is licensed under the terms of the GNU General Public | 
|  | 8 | * License version 2. This program is licensed "as is" without any | 
|  | 9 | * warranty of any kind, whether express or implied. | 
|  | 10 | */ | 
|  | 11 |  | 
|  | 12 | #include <linux/clk.h> | 
|  | 13 | #include <linux/io.h> | 
|  | 14 | #include <linux/mfd/syscon.h> | 
|  | 15 | #include <linux/mfd/syscon/atmel-matrix.h> | 
|  | 16 | #include <linux/mfd/syscon/atmel-smc.h> | 
|  | 17 | #include <linux/init.h> | 
|  | 18 | #include <linux/of_device.h> | 
|  | 19 | #include <linux/regmap.h> | 
|  | 20 |  | 
|  | 21 | struct atmel_ebi_dev_config { | 
|  | 22 | int cs; | 
|  | 23 | struct atmel_smc_cs_conf smcconf; | 
|  | 24 | }; | 
|  | 25 |  | 
|  | 26 | struct atmel_ebi; | 
|  | 27 |  | 
|  | 28 | struct atmel_ebi_dev { | 
|  | 29 | struct list_head node; | 
|  | 30 | struct atmel_ebi *ebi; | 
|  | 31 | u32 mode; | 
|  | 32 | int numcs; | 
|  | 33 | struct atmel_ebi_dev_config configs[]; | 
|  | 34 | }; | 
|  | 35 |  | 
|  | 36 | struct atmel_ebi_caps { | 
|  | 37 | unsigned int available_cs; | 
|  | 38 | unsigned int ebi_csa_offs; | 
|  | 39 | void (*get_config)(struct atmel_ebi_dev *ebid, | 
|  | 40 | struct atmel_ebi_dev_config *conf); | 
|  | 41 | int (*xlate_config)(struct atmel_ebi_dev *ebid, | 
|  | 42 | struct device_node *configs_np, | 
|  | 43 | struct atmel_ebi_dev_config *conf); | 
|  | 44 | void (*apply_config)(struct atmel_ebi_dev *ebid, | 
|  | 45 | struct atmel_ebi_dev_config *conf); | 
|  | 46 | }; | 
|  | 47 |  | 
|  | 48 | struct atmel_ebi { | 
|  | 49 | struct clk *clk; | 
|  | 50 | struct regmap *matrix; | 
|  | 51 | struct  { | 
|  | 52 | struct regmap *regmap; | 
|  | 53 | struct clk *clk; | 
|  | 54 | const struct atmel_hsmc_reg_layout *layout; | 
|  | 55 | } smc; | 
|  | 56 |  | 
|  | 57 | struct device *dev; | 
|  | 58 | const struct atmel_ebi_caps *caps; | 
|  | 59 | struct list_head devs; | 
|  | 60 | }; | 
|  | 61 |  | 
|  | 62 | struct atmel_smc_timing_xlate { | 
|  | 63 | const char *name; | 
|  | 64 | int (*converter)(struct atmel_smc_cs_conf *conf, | 
|  | 65 | unsigned int shift, unsigned int nycles); | 
|  | 66 | unsigned int shift; | 
|  | 67 | }; | 
|  | 68 |  | 
|  | 69 | #define ATMEL_SMC_SETUP_XLATE(nm, pos)	\ | 
|  | 70 | { .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos} | 
|  | 71 |  | 
|  | 72 | #define ATMEL_SMC_PULSE_XLATE(nm, pos)	\ | 
|  | 73 | { .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos} | 
|  | 74 |  | 
|  | 75 | #define ATMEL_SMC_CYCLE_XLATE(nm, pos)	\ | 
|  | 76 | { .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos} | 
|  | 77 |  | 
|  | 78 | static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid, | 
|  | 79 | struct atmel_ebi_dev_config *conf) | 
|  | 80 | { | 
|  | 81 | atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs, | 
|  | 82 | &conf->smcconf); | 
|  | 83 | } | 
|  | 84 |  | 
|  | 85 | static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid, | 
|  | 86 | struct atmel_ebi_dev_config *conf) | 
|  | 87 | { | 
|  | 88 | atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, | 
|  | 89 | conf->cs, &conf->smcconf); | 
|  | 90 | } | 
|  | 91 |  | 
|  | 92 | static const struct atmel_smc_timing_xlate timings_xlate_table[] = { | 
|  | 93 | ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-rd-setup-ns", | 
|  | 94 | ATMEL_SMC_NCS_RD_SHIFT), | 
|  | 95 | ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-wr-setup-ns", | 
|  | 96 | ATMEL_SMC_NCS_WR_SHIFT), | 
|  | 97 | ATMEL_SMC_SETUP_XLATE("atmel,smc-nrd-setup-ns", ATMEL_SMC_NRD_SHIFT), | 
|  | 98 | ATMEL_SMC_SETUP_XLATE("atmel,smc-nwe-setup-ns", ATMEL_SMC_NWE_SHIFT), | 
|  | 99 | ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-rd-pulse-ns", | 
|  | 100 | ATMEL_SMC_NCS_RD_SHIFT), | 
|  | 101 | ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-wr-pulse-ns", | 
|  | 102 | ATMEL_SMC_NCS_WR_SHIFT), | 
|  | 103 | ATMEL_SMC_PULSE_XLATE("atmel,smc-nrd-pulse-ns", ATMEL_SMC_NRD_SHIFT), | 
|  | 104 | ATMEL_SMC_PULSE_XLATE("atmel,smc-nwe-pulse-ns", ATMEL_SMC_NWE_SHIFT), | 
|  | 105 | ATMEL_SMC_CYCLE_XLATE("atmel,smc-nrd-cycle-ns", ATMEL_SMC_NRD_SHIFT), | 
|  | 106 | ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT), | 
|  | 107 | }; | 
|  | 108 |  | 
|  | 109 | static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid, | 
|  | 110 | struct device_node *np, | 
|  | 111 | struct atmel_smc_cs_conf *smcconf) | 
|  | 112 | { | 
|  | 113 | unsigned int clk_rate = clk_get_rate(ebid->ebi->clk); | 
|  | 114 | unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate; | 
|  | 115 | bool required = false; | 
|  | 116 | unsigned int ncycles; | 
|  | 117 | int ret, i; | 
|  | 118 | u32 val; | 
|  | 119 |  | 
|  | 120 | ret = of_property_read_u32(np, "atmel,smc-tdf-ns", &val); | 
|  | 121 | if (!ret) { | 
|  | 122 | required = true; | 
|  | 123 | ncycles = DIV_ROUND_UP(val, clk_period_ns); | 
|  | 124 | if (ncycles > ATMEL_SMC_MODE_TDF_MAX) { | 
|  | 125 | ret = -EINVAL; | 
|  | 126 | goto out; | 
|  | 127 | } | 
|  | 128 |  | 
|  | 129 | if (ncycles < ATMEL_SMC_MODE_TDF_MIN) | 
|  | 130 | ncycles = ATMEL_SMC_MODE_TDF_MIN; | 
|  | 131 |  | 
|  | 132 | smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles); | 
|  | 133 | } | 
|  | 134 |  | 
|  | 135 | for (i = 0; i < ARRAY_SIZE(timings_xlate_table); i++) { | 
|  | 136 | const struct atmel_smc_timing_xlate *xlate; | 
|  | 137 |  | 
|  | 138 | xlate = &timings_xlate_table[i]; | 
|  | 139 |  | 
|  | 140 | ret = of_property_read_u32(np, xlate->name, &val); | 
|  | 141 | if (ret) { | 
|  | 142 | if (!required) | 
|  | 143 | continue; | 
|  | 144 | else | 
|  | 145 | break; | 
|  | 146 | } | 
|  | 147 |  | 
|  | 148 | if (!required) { | 
|  | 149 | ret = -EINVAL; | 
|  | 150 | break; | 
|  | 151 | } | 
|  | 152 |  | 
|  | 153 | ncycles = DIV_ROUND_UP(val, clk_period_ns); | 
|  | 154 | ret = xlate->converter(smcconf, xlate->shift, ncycles); | 
|  | 155 | if (ret) | 
|  | 156 | goto out; | 
|  | 157 | } | 
|  | 158 |  | 
|  | 159 | out: | 
|  | 160 | if (ret) { | 
|  | 161 | dev_err(ebid->ebi->dev, | 
|  | 162 | "missing or invalid timings definition in %pOF", | 
|  | 163 | np); | 
|  | 164 | return ret; | 
|  | 165 | } | 
|  | 166 |  | 
|  | 167 | return required; | 
|  | 168 | } | 
|  | 169 |  | 
|  | 170 | static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid, | 
|  | 171 | struct device_node *np, | 
|  | 172 | struct atmel_ebi_dev_config *conf) | 
|  | 173 | { | 
|  | 174 | struct atmel_smc_cs_conf *smcconf = &conf->smcconf; | 
|  | 175 | bool required = false; | 
|  | 176 | const char *tmp_str; | 
|  | 177 | u32 tmp; | 
|  | 178 | int ret; | 
|  | 179 |  | 
|  | 180 | ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp); | 
|  | 181 | if (!ret) { | 
|  | 182 | switch (tmp) { | 
|  | 183 | case 8: | 
|  | 184 | smcconf->mode |= ATMEL_SMC_MODE_DBW_8; | 
|  | 185 | break; | 
|  | 186 |  | 
|  | 187 | case 16: | 
|  | 188 | smcconf->mode |= ATMEL_SMC_MODE_DBW_16; | 
|  | 189 | break; | 
|  | 190 |  | 
|  | 191 | case 32: | 
|  | 192 | smcconf->mode |= ATMEL_SMC_MODE_DBW_32; | 
|  | 193 | break; | 
|  | 194 |  | 
|  | 195 | default: | 
|  | 196 | return -EINVAL; | 
|  | 197 | } | 
|  | 198 |  | 
|  | 199 | required = true; | 
|  | 200 | } | 
|  | 201 |  | 
|  | 202 | if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) { | 
|  | 203 | smcconf->mode |= ATMEL_SMC_MODE_TDFMODE_OPTIMIZED; | 
|  | 204 | required = true; | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | tmp_str = NULL; | 
|  | 208 | of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str); | 
|  | 209 | if (tmp_str && !strcmp(tmp_str, "write")) { | 
|  | 210 | smcconf->mode |= ATMEL_SMC_MODE_BAT_WRITE; | 
|  | 211 | required = true; | 
|  | 212 | } | 
|  | 213 |  | 
|  | 214 | tmp_str = NULL; | 
|  | 215 | of_property_read_string(np, "atmel,smc-read-mode", &tmp_str); | 
|  | 216 | if (tmp_str && !strcmp(tmp_str, "nrd")) { | 
|  | 217 | smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD; | 
|  | 218 | required = true; | 
|  | 219 | } | 
|  | 220 |  | 
|  | 221 | tmp_str = NULL; | 
|  | 222 | of_property_read_string(np, "atmel,smc-write-mode", &tmp_str); | 
|  | 223 | if (tmp_str && !strcmp(tmp_str, "nwe")) { | 
|  | 224 | smcconf->mode |= ATMEL_SMC_MODE_WRITEMODE_NWE; | 
|  | 225 | required = true; | 
|  | 226 | } | 
|  | 227 |  | 
|  | 228 | tmp_str = NULL; | 
|  | 229 | of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str); | 
|  | 230 | if (tmp_str) { | 
|  | 231 | if (!strcmp(tmp_str, "frozen")) | 
|  | 232 | smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_FROZEN; | 
|  | 233 | else if (!strcmp(tmp_str, "ready")) | 
|  | 234 | smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_READY; | 
|  | 235 | else if (strcmp(tmp_str, "disabled")) | 
|  | 236 | return -EINVAL; | 
|  | 237 |  | 
|  | 238 | required = true; | 
|  | 239 | } | 
|  | 240 |  | 
|  | 241 | ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp); | 
|  | 242 | if (!ret) { | 
|  | 243 | switch (tmp) { | 
|  | 244 | case 4: | 
|  | 245 | smcconf->mode |= ATMEL_SMC_MODE_PS_4; | 
|  | 246 | break; | 
|  | 247 |  | 
|  | 248 | case 8: | 
|  | 249 | smcconf->mode |= ATMEL_SMC_MODE_PS_8; | 
|  | 250 | break; | 
|  | 251 |  | 
|  | 252 | case 16: | 
|  | 253 | smcconf->mode |= ATMEL_SMC_MODE_PS_16; | 
|  | 254 | break; | 
|  | 255 |  | 
|  | 256 | case 32: | 
|  | 257 | smcconf->mode |= ATMEL_SMC_MODE_PS_32; | 
|  | 258 | break; | 
|  | 259 |  | 
|  | 260 | default: | 
|  | 261 | return -EINVAL; | 
|  | 262 | } | 
|  | 263 |  | 
|  | 264 | smcconf->mode |= ATMEL_SMC_MODE_PMEN; | 
|  | 265 | required = true; | 
|  | 266 | } | 
|  | 267 |  | 
|  | 268 | ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf); | 
|  | 269 | if (ret < 0) | 
|  | 270 | return -EINVAL; | 
|  | 271 |  | 
|  | 272 | if ((ret > 0 && !required) || (!ret && required)) { | 
|  | 273 | dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF", | 
|  | 274 | np); | 
|  | 275 | return -EINVAL; | 
|  | 276 | } | 
|  | 277 |  | 
|  | 278 | return required; | 
|  | 279 | } | 
|  | 280 |  | 
|  | 281 | static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid, | 
|  | 282 | struct atmel_ebi_dev_config *conf) | 
|  | 283 | { | 
|  | 284 | atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs, | 
|  | 285 | &conf->smcconf); | 
|  | 286 | } | 
|  | 287 |  | 
|  | 288 | static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid, | 
|  | 289 | struct atmel_ebi_dev_config *conf) | 
|  | 290 | { | 
|  | 291 | atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, | 
|  | 292 | conf->cs, &conf->smcconf); | 
|  | 293 | } | 
|  | 294 |  | 
|  | 295 | static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, | 
|  | 296 | int reg_cells) | 
|  | 297 | { | 
|  | 298 | const struct atmel_ebi_caps *caps = ebi->caps; | 
|  | 299 | struct atmel_ebi_dev_config conf = { }; | 
|  | 300 | struct device *dev = ebi->dev; | 
|  | 301 | struct atmel_ebi_dev *ebid; | 
|  | 302 | unsigned long cslines = 0; | 
|  | 303 | int ret, numcs = 0, nentries, i; | 
|  | 304 | bool apply = false; | 
|  | 305 | u32 cs; | 
|  | 306 |  | 
|  | 307 | nentries = of_property_count_elems_of_size(np, "reg", | 
|  | 308 | reg_cells * sizeof(u32)); | 
|  | 309 | for (i = 0; i < nentries; i++) { | 
|  | 310 | ret = of_property_read_u32_index(np, "reg", i * reg_cells, | 
|  | 311 | &cs); | 
|  | 312 | if (ret) | 
|  | 313 | return ret; | 
|  | 314 |  | 
|  | 315 | if (cs >= AT91_MATRIX_EBI_NUM_CS || | 
|  | 316 | !(ebi->caps->available_cs & BIT(cs))) { | 
|  | 317 | dev_err(dev, "invalid reg property in %pOF\n", np); | 
|  | 318 | return -EINVAL; | 
|  | 319 | } | 
|  | 320 |  | 
|  | 321 | if (!test_and_set_bit(cs, &cslines)) | 
|  | 322 | numcs++; | 
|  | 323 | } | 
|  | 324 |  | 
|  | 325 | if (!numcs) { | 
|  | 326 | dev_err(dev, "invalid reg property in %pOF\n", np); | 
|  | 327 | return -EINVAL; | 
|  | 328 | } | 
|  | 329 |  | 
|  | 330 | ebid = devm_kzalloc(ebi->dev, | 
|  | 331 | sizeof(*ebid) + (numcs * sizeof(*ebid->configs)), | 
|  | 332 | GFP_KERNEL); | 
|  | 333 | if (!ebid) | 
|  | 334 | return -ENOMEM; | 
|  | 335 |  | 
|  | 336 | ebid->ebi = ebi; | 
|  | 337 | ebid->numcs = numcs; | 
|  | 338 |  | 
|  | 339 | ret = caps->xlate_config(ebid, np, &conf); | 
|  | 340 | if (ret < 0) | 
|  | 341 | return ret; | 
|  | 342 | else if (ret) | 
|  | 343 | apply = true; | 
|  | 344 |  | 
|  | 345 | i = 0; | 
|  | 346 | for_each_set_bit(cs, &cslines, AT91_MATRIX_EBI_NUM_CS) { | 
|  | 347 | ebid->configs[i].cs = cs; | 
|  | 348 |  | 
|  | 349 | if (apply) { | 
|  | 350 | conf.cs = cs; | 
|  | 351 | caps->apply_config(ebid, &conf); | 
|  | 352 | } | 
|  | 353 |  | 
|  | 354 | caps->get_config(ebid, &ebid->configs[i]); | 
|  | 355 |  | 
|  | 356 | /* | 
|  | 357 | * Attach the EBI device to the generic SMC logic if at least | 
|  | 358 | * one "atmel,smc-" property is present. | 
|  | 359 | */ | 
|  | 360 | if (ebi->caps->ebi_csa_offs && apply) | 
|  | 361 | regmap_update_bits(ebi->matrix, | 
|  | 362 | ebi->caps->ebi_csa_offs, | 
|  | 363 | BIT(cs), 0); | 
|  | 364 |  | 
|  | 365 | i++; | 
|  | 366 | } | 
|  | 367 |  | 
|  | 368 | list_add_tail(&ebid->node, &ebi->devs); | 
|  | 369 |  | 
|  | 370 | return 0; | 
|  | 371 | } | 
|  | 372 |  | 
|  | 373 | static const struct atmel_ebi_caps at91sam9260_ebi_caps = { | 
|  | 374 | .available_cs = 0xff, | 
|  | 375 | .ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA, | 
|  | 376 | .get_config = at91sam9_ebi_get_config, | 
|  | 377 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 378 | .apply_config = at91sam9_ebi_apply_config, | 
|  | 379 | }; | 
|  | 380 |  | 
|  | 381 | static const struct atmel_ebi_caps at91sam9261_ebi_caps = { | 
|  | 382 | .available_cs = 0xff, | 
|  | 383 | .ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA, | 
|  | 384 | .get_config = at91sam9_ebi_get_config, | 
|  | 385 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 386 | .apply_config = at91sam9_ebi_apply_config, | 
|  | 387 | }; | 
|  | 388 |  | 
|  | 389 | static const struct atmel_ebi_caps at91sam9263_ebi0_caps = { | 
|  | 390 | .available_cs = 0x3f, | 
|  | 391 | .ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA, | 
|  | 392 | .get_config = at91sam9_ebi_get_config, | 
|  | 393 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 394 | .apply_config = at91sam9_ebi_apply_config, | 
|  | 395 | }; | 
|  | 396 |  | 
|  | 397 | static const struct atmel_ebi_caps at91sam9263_ebi1_caps = { | 
|  | 398 | .available_cs = 0x7, | 
|  | 399 | .ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA, | 
|  | 400 | .get_config = at91sam9_ebi_get_config, | 
|  | 401 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 402 | .apply_config = at91sam9_ebi_apply_config, | 
|  | 403 | }; | 
|  | 404 |  | 
|  | 405 | static const struct atmel_ebi_caps at91sam9rl_ebi_caps = { | 
|  | 406 | .available_cs = 0x3f, | 
|  | 407 | .ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA, | 
|  | 408 | .get_config = at91sam9_ebi_get_config, | 
|  | 409 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 410 | .apply_config = at91sam9_ebi_apply_config, | 
|  | 411 | }; | 
|  | 412 |  | 
|  | 413 | static const struct atmel_ebi_caps at91sam9g45_ebi_caps = { | 
|  | 414 | .available_cs = 0x3f, | 
|  | 415 | .ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA, | 
|  | 416 | .get_config = at91sam9_ebi_get_config, | 
|  | 417 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 418 | .apply_config = at91sam9_ebi_apply_config, | 
|  | 419 | }; | 
|  | 420 |  | 
|  | 421 | static const struct atmel_ebi_caps at91sam9x5_ebi_caps = { | 
|  | 422 | .available_cs = 0x3f, | 
|  | 423 | .ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA, | 
|  | 424 | .get_config = at91sam9_ebi_get_config, | 
|  | 425 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 426 | .apply_config = at91sam9_ebi_apply_config, | 
|  | 427 | }; | 
|  | 428 |  | 
|  | 429 | static const struct atmel_ebi_caps sama5d3_ebi_caps = { | 
|  | 430 | .available_cs = 0xf, | 
|  | 431 | .get_config = sama5_ebi_get_config, | 
|  | 432 | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | 433 | .apply_config = sama5_ebi_apply_config, | 
|  | 434 | }; | 
|  | 435 |  | 
|  | 436 | static const struct of_device_id atmel_ebi_id_table[] = { | 
|  | 437 | { | 
|  | 438 | .compatible = "atmel,at91sam9260-ebi", | 
|  | 439 | .data = &at91sam9260_ebi_caps, | 
|  | 440 | }, | 
|  | 441 | { | 
|  | 442 | .compatible = "atmel,at91sam9261-ebi", | 
|  | 443 | .data = &at91sam9261_ebi_caps, | 
|  | 444 | }, | 
|  | 445 | { | 
|  | 446 | .compatible = "atmel,at91sam9263-ebi0", | 
|  | 447 | .data = &at91sam9263_ebi0_caps, | 
|  | 448 | }, | 
|  | 449 | { | 
|  | 450 | .compatible = "atmel,at91sam9263-ebi1", | 
|  | 451 | .data = &at91sam9263_ebi1_caps, | 
|  | 452 | }, | 
|  | 453 | { | 
|  | 454 | .compatible = "atmel,at91sam9rl-ebi", | 
|  | 455 | .data = &at91sam9rl_ebi_caps, | 
|  | 456 | }, | 
|  | 457 | { | 
|  | 458 | .compatible = "atmel,at91sam9g45-ebi", | 
|  | 459 | .data = &at91sam9g45_ebi_caps, | 
|  | 460 | }, | 
|  | 461 | { | 
|  | 462 | .compatible = "atmel,at91sam9x5-ebi", | 
|  | 463 | .data = &at91sam9x5_ebi_caps, | 
|  | 464 | }, | 
|  | 465 | { | 
|  | 466 | .compatible = "atmel,sama5d3-ebi", | 
|  | 467 | .data = &sama5d3_ebi_caps, | 
|  | 468 | }, | 
|  | 469 | { /* sentinel */ } | 
|  | 470 | }; | 
|  | 471 |  | 
|  | 472 | static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np) | 
|  | 473 | { | 
|  | 474 | struct device *dev = ebi->dev; | 
|  | 475 | struct property *newprop; | 
|  | 476 |  | 
|  | 477 | newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL); | 
|  | 478 | if (!newprop) | 
|  | 479 | return -ENOMEM; | 
|  | 480 |  | 
|  | 481 | newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL); | 
|  | 482 | if (!newprop->name) | 
|  | 483 | return -ENOMEM; | 
|  | 484 |  | 
|  | 485 | newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL); | 
|  | 486 | if (!newprop->value) | 
|  | 487 | return -ENOMEM; | 
|  | 488 |  | 
|  | 489 | newprop->length = sizeof("disabled"); | 
|  | 490 |  | 
|  | 491 | return of_update_property(np, newprop); | 
|  | 492 | } | 
|  | 493 |  | 
|  | 494 | static int atmel_ebi_probe(struct platform_device *pdev) | 
|  | 495 | { | 
|  | 496 | struct device *dev = &pdev->dev; | 
|  | 497 | struct device_node *child, *np = dev->of_node, *smc_np; | 
|  | 498 | const struct of_device_id *match; | 
|  | 499 | struct atmel_ebi *ebi; | 
|  | 500 | int ret, reg_cells; | 
|  | 501 | struct clk *clk; | 
|  | 502 | u32 val; | 
|  | 503 |  | 
|  | 504 | match = of_match_device(atmel_ebi_id_table, dev); | 
|  | 505 | if (!match || !match->data) | 
|  | 506 | return -EINVAL; | 
|  | 507 |  | 
|  | 508 | ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL); | 
|  | 509 | if (!ebi) | 
|  | 510 | return -ENOMEM; | 
|  | 511 |  | 
|  | 512 | platform_set_drvdata(pdev, ebi); | 
|  | 513 |  | 
|  | 514 | INIT_LIST_HEAD(&ebi->devs); | 
|  | 515 | ebi->caps = match->data; | 
|  | 516 | ebi->dev = dev; | 
|  | 517 |  | 
|  | 518 | clk = devm_clk_get(dev, NULL); | 
|  | 519 | if (IS_ERR(clk)) | 
|  | 520 | return PTR_ERR(clk); | 
|  | 521 |  | 
|  | 522 | ebi->clk = clk; | 
|  | 523 |  | 
|  | 524 | smc_np = of_parse_phandle(dev->of_node, "atmel,smc", 0); | 
|  | 525 |  | 
|  | 526 | ebi->smc.regmap = syscon_node_to_regmap(smc_np); | 
|  | 527 | if (IS_ERR(ebi->smc.regmap)) | 
|  | 528 | return PTR_ERR(ebi->smc.regmap); | 
|  | 529 |  | 
|  | 530 | ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np); | 
|  | 531 | if (IS_ERR(ebi->smc.layout)) | 
|  | 532 | return PTR_ERR(ebi->smc.layout); | 
|  | 533 |  | 
|  | 534 | ebi->smc.clk = of_clk_get(smc_np, 0); | 
|  | 535 | if (IS_ERR(ebi->smc.clk)) { | 
|  | 536 | if (PTR_ERR(ebi->smc.clk) != -ENOENT) | 
|  | 537 | return PTR_ERR(ebi->smc.clk); | 
|  | 538 |  | 
|  | 539 | ebi->smc.clk = NULL; | 
|  | 540 | } | 
|  | 541 | ret = clk_prepare_enable(ebi->smc.clk); | 
|  | 542 | if (ret) | 
|  | 543 | return ret; | 
|  | 544 |  | 
|  | 545 | /* | 
|  | 546 | * The sama5d3 does not provide an EBICSA register and thus does need | 
|  | 547 | * to access the matrix registers. | 
|  | 548 | */ | 
|  | 549 | if (ebi->caps->ebi_csa_offs) { | 
|  | 550 | ebi->matrix = | 
|  | 551 | syscon_regmap_lookup_by_phandle(np, "atmel,matrix"); | 
|  | 552 | if (IS_ERR(ebi->matrix)) | 
|  | 553 | return PTR_ERR(ebi->matrix); | 
|  | 554 | } | 
|  | 555 |  | 
|  | 556 | ret = of_property_read_u32(np, "#address-cells", &val); | 
|  | 557 | if (ret) { | 
|  | 558 | dev_err(dev, "missing #address-cells property\n"); | 
|  | 559 | return ret; | 
|  | 560 | } | 
|  | 561 |  | 
|  | 562 | reg_cells = val; | 
|  | 563 |  | 
|  | 564 | ret = of_property_read_u32(np, "#size-cells", &val); | 
|  | 565 | if (ret) { | 
|  | 566 | dev_err(dev, "missing #address-cells property\n"); | 
|  | 567 | return ret; | 
|  | 568 | } | 
|  | 569 |  | 
|  | 570 | reg_cells += val; | 
|  | 571 |  | 
|  | 572 | for_each_available_child_of_node(np, child) { | 
|  | 573 | if (!of_find_property(child, "reg", NULL)) | 
|  | 574 | continue; | 
|  | 575 |  | 
|  | 576 | ret = atmel_ebi_dev_setup(ebi, child, reg_cells); | 
|  | 577 | if (ret) { | 
|  | 578 | dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device", | 
|  | 579 | child); | 
|  | 580 |  | 
|  | 581 | ret = atmel_ebi_dev_disable(ebi, child); | 
|  | 582 | if (ret) | 
|  | 583 | return ret; | 
|  | 584 | } | 
|  | 585 | } | 
|  | 586 |  | 
|  | 587 | return of_platform_populate(np, NULL, NULL, dev); | 
|  | 588 | } | 
|  | 589 |  | 
|  | 590 | static __maybe_unused int atmel_ebi_resume(struct device *dev) | 
|  | 591 | { | 
|  | 592 | struct atmel_ebi *ebi = dev_get_drvdata(dev); | 
|  | 593 | struct atmel_ebi_dev *ebid; | 
|  | 594 |  | 
|  | 595 | list_for_each_entry(ebid, &ebi->devs, node) { | 
|  | 596 | int i; | 
|  | 597 |  | 
|  | 598 | for (i = 0; i < ebid->numcs; i++) | 
|  | 599 | ebid->ebi->caps->apply_config(ebid, &ebid->configs[i]); | 
|  | 600 | } | 
|  | 601 |  | 
|  | 602 | return 0; | 
|  | 603 | } | 
|  | 604 |  | 
|  | 605 | static SIMPLE_DEV_PM_OPS(atmel_ebi_pm_ops, NULL, atmel_ebi_resume); | 
|  | 606 |  | 
|  | 607 | static struct platform_driver atmel_ebi_driver = { | 
|  | 608 | .driver = { | 
|  | 609 | .name = "atmel-ebi", | 
|  | 610 | .of_match_table	= atmel_ebi_id_table, | 
|  | 611 | .pm = &atmel_ebi_pm_ops, | 
|  | 612 | }, | 
|  | 613 | }; | 
|  | 614 | builtin_platform_driver_probe(atmel_ebi_driver, atmel_ebi_probe); |