| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2008 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| /******************************************************************************* |
| * |
| * Filename: |
| * --------- |
| * custom_flc_config.h |
| * |
| * Project: |
| * -------- |
| * MAUI Project |
| * |
| * Description: |
| * ------------ |
| * This file is used to define the FLC2 configuration. |
| * |
| * Author: |
| * ------- |
| * ------- |
| * |
| *============================================================================== |
| * HISTORY |
| * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *------------------------------------------------------------------------------ |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| *------------------------------------------------------------------------------ |
| * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *============================================================================== |
| *******************************************************************************/ |
| |
| #ifndef _CUSTOM_FLC_CONFIG_H |
| #define _CUSTOM_FLC_CONFIG_H |
| |
| #include "kal_general_types.h" |
| |
| /************************************************************************* |
| * MM BLOCK 11 (ADM) |
| *************************************************************************/ |
| /* ADM, BLOCK SIZE, 64, 384, 640, 1636 */ |
| /* For SPDU TPDU (TCP/IP, socket)*/ |
| |
| /*================= Guideline for SPDU_UL and SPDU_DL configuration ============= |
| |
| 1. Each Socket has corresponding pool, and each pool has a dedicated buffer |
| with size FLC2_SPDU_UL_SIZE_EM. |
| 2. There is a share pool for all socket pools. |
| Please define the growth pool size with FLC2_SPDU_UL_GROW_POOL_SIZE. |
| 3. Please config FLC2_SPDU_DL_POOL_SIZE for downlink socket pool size. |
| ( Receive Window Size.) |
| |
| NOTE: Do NOT Change Socket number by yourself. It needs update protocol library. |
| ========================================================================== */ |
| |
| /* SSPDU */ |
| #define FLC2_SPDU_UL_SIZE_EM (1664) |
| |
| #ifdef __TCPIP__ |
| /* TCPIP is support. */ |
| |
| /* SPDU_UL configuration */ |
| #define FLC2_SPDU_UL_SIZE FLC2_SPDU_UL_SIZE_EM |
| |
| #if defined(__WIFI_SUPPORT__) || defined(__HSUPA_SUPPORT__) |
| |
| #define FLC2_SPDU_UL_GROW_POOL_SIZE_PLUS 30 |
| |
| #if defined(__HOTSPOT_SUPPORT__) |
| #define FLC2_SPDU_UL_GROW_POOL_SIZE ((18+FLC2_SPDU_UL_GROW_POOL_SIZE_PLUS) *FLC2_SPDU_UL_SIZE) |
| #else // #if defined(__HOTSPOT_SUPPORT__) |
| #define FLC2_SPDU_UL_GROW_POOL_SIZE ((14+FLC2_SPDU_UL_GROW_POOL_SIZE_PLUS) *FLC2_SPDU_UL_SIZE) |
| #endif // #if defined(__HOTSPOT_SUPPORT__) |
| |
| #elif defined(__EGPRS_MODE__) |
| #define FLC2_SPDU_UL_GROW_POOL_SIZE (13 *FLC2_SPDU_UL_SIZE) |
| #else /* __EGPRS_MODE__ */ |
| #define FLC2_SPDU_UL_GROW_POOL_SIZE (5 *FLC2_SPDU_UL_SIZE) |
| #endif /* __EGPRS_MODE__ */ |
| |
| |
| #if defined(__UMTS_RAT__) |
| |
| #ifdef __HOTSPOT_SUPPORT_PERFORMANCE_BENCHMARK__ |
| #define FLC2_SPDU_DL_POOL_SIZE (120 * 1660) |
| #else |
| #define FLC2_SPDU_DL_POOL_SIZE (51 * 1660) |
| #endif |
| |
| #elif defined(__EGPRS_MODE__)|| defined(__WIFI_SUPPORT__) |
| #ifdef WISDOM_MMI |
| #define FLC2_SPDU_DL_POOL_SIZE (120 * 1660) |
| #else /* !WISDOM_MMI */ |
| #define FLC2_SPDU_DL_POOL_SIZE (34 * 1660) |
| #endif /* !WISDOM_MMI */ |
| #else /* __EGPRS_MODE__ */ |
| #define FLC2_SPDU_DL_POOL_SIZE (16 * 1660) |
| #endif /* __EGPRS_MODE__ */ |
| |
| #else /* ============= __TCPIP__ =================== */ |
| /* TCPIP is NOT support */ |
| |
| #define FLC2_SPDU_UL_SIZE (0) |
| |
| #define FLC2_SPDU_UL_GROW_POOL_SIZE (0) |
| #define FLC2_SPDU_DL_POOL_SIZE (0) |
| |
| #endif /* ============= __TCPIP__ =================== */ |
| |
| |
| #if defined(__HOTSPOT_SUPPORT__) |
| #define FLC2_HS_POOL_SIZE (FLC2_SPDU_UL_SIZE_EM) |
| #define FLC2_HS_POOL_MAX_GROW_SIZE (120 * FLC2_SPDU_UL_SIZE_EM) |
| #define FLC2_HS_GROW_STEP_SIZE (3 * FLC2_SPDU_UL_SIZE_EM) |
| #else |
| #define FLC2_HS_POOL_SIZE (0) |
| #define FLC2_HS_POOL_MAX_GROW_SIZE (0) |
| #define FLC2_HS_GROW_STEP_SIZE (0) |
| #endif |
| |
| |
| |
| /*======================================================================== |
| * CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !! |
| * |
| * Please DO NOT modify below setting. |
| * |
| * CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !! |
| *======================================================================= */ |
| |
| |
| |
| |
| #ifdef __TCPIP__ |
| /* TCPIP is support. */ |
| |
| #if (defined(__VOIP__) || defined(STREAM_SUPPORT)) || defined(FLC2_25_SOCKET_SUPPORT) |
| #define FLC2_SPDU_UL_POOL_NUMBER (25) /* socket number, 1 block per socket */ |
| #elif (defined(WAP_SUPPORT) && defined(__IMPS__)) |
| #define FLC2_SPDU_UL_POOL_NUMBER (19) /* socket number, 1 block per socket */ |
| #else /* __VOIP__ */ |
| #define FLC2_SPDU_UL_POOL_NUMBER (14) /* socket number, 1 block per socket */ |
| #endif /* __VOIP__ */ |
| |
| #else /* __TCPIP__ */ |
| |
| #define FLC2_SPDU_UL_POOL_NUMBER (0) |
| #endif /* __TCPIP__ */ |
| |
| #define FLC2_SPDU_UL_MAX_GROW_SIZE FLC2_SPDU_UL_GROW_POOL_SIZE |
| |
| #define FLC2_SPDU_UL_POOL_SIZE (FLC2_SPDU_UL_SIZE_EM* FLC2_SPDU_UL_POOL_NUMBER) |
| |
| |
| /* TPDU */ |
| #ifdef __TCPIP__ |
| |
| #if defined(__WIFI_SUPPORT__) || defined(__HSUPA_SUPPORT__) |
| |
| #define FLC2_TPDU_POOL_SIZE_PLUS 22 |
| |
| #define FLC2_TPDU_POOL_SIZE ((8+FLC2_TPDU_POOL_SIZE_PLUS)*1668) |
| #else /* __WIFI_SUPPORT__ */ |
| #define FLC2_TPDU_POOL_SIZE ((4)*1668) |
| #endif /* __WIFI_SUPPORT__ */ |
| |
| #else /* __TCPIP__ */ |
| #define FLC2_TPDU_POOL_SIZE (0) |
| #endif /* __TCPIP__ */ |
| |
| |
| |
| /* The value shall synchronize with FLC2_MEM_ADM_CTRL_HEADER_LEN defined in flc2_mem_mngr_config.h */ |
| //#define FLC2_MEM_ADM_CTRL_HEADER_LEN (((sizeof(flc2_mb_adm_ctrl_header_struct)+3)/4)*4) |
| #define FLC2_CUS_MEM_ADM_CTRL_HEADER_LEN (20) |
| |
| |
| /* MM BLOCK 11 */ |
| /* ADM, BLOCK SIZE, 64, 384, 640, 1636 */ |
| /* For SPDU TPDU (TCP/IP, socket)*/ |
| |
| #ifndef FLC2_MAX |
| #define FLC2_MAX(FLC_A, FLC_B) (((FLC_A) > (FLC_B)) ? (FLC_A):(FLC_B)) |
| #endif |
| |
| #define FLC2_MM_BLOCK_11_SIZE ( FLC2_SPDU_UL_POOL_SIZE + \ |
| FLC2_HS_POOL_SIZE + \ |
| FLC2_MAX(FLC2_SPDU_UL_MAX_GROW_SIZE, FLC2_HS_POOL_MAX_GROW_SIZE) + \ |
| FLC2_TPDU_POOL_SIZE + \ |
| FLC2_CUS_MEM_ADM_CTRL_HEADER_LEN) |
| |
| #define FLC2_MM_BLOCK_12_SIZE ( FLC2_SPDU_DL_POOL_SIZE + \ |
| FLC2_CUS_MEM_ADM_CTRL_HEADER_LEN) |
| |
| /* End of MM BLOCK 11 */ |
| |
| |
| |
| |
| typedef enum { |
| GPRS_FLC_UL, /* Uplink */ |
| GPRS_FLC_DL /* Downlink */ |
| } gprs_flc_dir_enum; |
| |
| |
| /* Global variable declaration. */ |
| extern kal_uint32 flc2_mm_block_11_g[]; |
| extern kal_uint32 flc2_mm_block_12_g[]; |
| |
| |
| extern kal_uint32 flc_get_profile_info_spdu_ul(kal_uint32 *total_size_em_mode, kal_uint32 *max_grow_size); |
| extern kal_uint32 flc_get_profile_info_spdu_dl(kal_uint32 *max_grow_size); |
| extern kal_uint32 flc_get_profile_info_tpdu(kal_uint32 *max_grow_size); |
| |
| extern kal_uint32* flc_get_mb_info_index_11(kal_uint32 *total_size, kal_uint32 *max_grow_size); |
| extern kal_uint32* flc_get_mb_info_index_12(kal_uint32 *total_size, kal_uint32 *max_grow_size); |
| |
| |
| #endif /* _CUSTOM_FLC_CONFIG_H */ |
| |