| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2016 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS (""MEDIATEK SOFTWARE"") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN ""AS-IS"" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| |
| #ifndef _PSWAIRMSG_H_ |
| |
| #define _PSWAIRMSG_H_ 1 |
| |
| /***************************************************************************** |
| * Includes |
| ****************************************************************************/ |
| #include "psw_nvram.h" |
| |
| typedef enum |
| { |
| /* define the page message types */ |
| CP_SPY_QPCH_PI_MESSAGE =0, /* MSG id only used to display QPCH PI parameters in Overhead Signaling Spy window */ |
| CP_SYSTEM_PARS_MESSAGE =1, |
| CP_ACCESS_PARS_MESSAGE =2, |
| CP_NEIGHBOR_LIST_MESSAGE =3, |
| CP_CDMA_CHANNEL_LIST =4, |
| |
| /* The following two messages are obsolete in 95B */ |
| CP_SLOTTED_PAGE =5, |
| CP_PAGE_MESSAGE =6, |
| |
| CP_ORDER_MESSAGE =7, |
| CP_CHANNEL_ASSIGN_MESSAGE =8, |
| CP_DATA_BURST_MESSAGE =9, |
| CP_AUTH_CHALL_MESSAGE =10, |
| CP_SSD_UPDATE_MESSAGE =11, |
| CP_FEATURE_NOTIFICATION_MESSAGE =12, |
| CP_EXT_SYSTEM_PARS_MESSAGE =13, |
| CP_EXT_NEIGHBOR_LIST_MESSAGE =14, |
| CP_STATUS_REQUEST_MESSAGE =15, |
| CP_SERVICE_REDIRECT_MESSAGE =16, |
| CP_GENERAL_PAGE_MESSAGE =17, |
| CP_GLOBAL_SERVICE_REDIRECT_MESSAGE =18, |
| CP_TMSI_ASSIGNMENT_MESSAGE =19, |
| CP_PACA_MESSAGE =20, |
| CP_EXT_CHANNEL_ASSIGN_MESSAGE =21, |
| CP_GEN_NEIGHBOR_LIST_MESSAGE =22, |
| |
| /* new message types for IS-2000 Rev.0 */ |
| CP_USER_ZONE_ID_MESSAGE =23, |
| CP_PRI_NGHBR_LST_MESSAGE =24, |
| |
| CP_EXT_GLOB_SERV_REDIR_MESSAGE =26, |
| CP_EXT_CDMA_CHAN_LST_MESSAGE =27, |
| CP_USER_ZONE_REJECT_MESSAGE =28, |
| |
| /* #ifdef IS2000_REV_A */ |
| /* new message types for IS-2000 Rev.A */ |
| CP_ANSI_41_SYS_PARS_MESSAGE =29, |
| CP_MC_RR_PARS_MESSAGE =30, |
| CP_ANSI_41_RAND_MESSAGE =31, |
| CP_ENH_ACCESS_PARS_MESSAGE =32, |
| CP_UNIV_NGHBR_LST_MESSAGE =33, |
| CP_SECURITY_MODE_COMMAND_MESSAGE =34, |
| CP_UNIV_PAGE_MESSAGE_1 =35, |
| CP_UNIV_PAGE_MESSAGE_2 =36, |
| CP_UNIV_PAGE_MESSAGE_3 =37, |
| CP_UNIV_PAGE_MESSAGE_4 =38, |
| CP_AUTH_REQ_MESSAGE =39, |
| CP_MEID_EXT_CHANNEL_ASSIGN_MESSAGE =46, |
| |
| #ifdef MTK_DEV_C2K_IRAT |
| CP_ALTERNATIVE_TECH_INFO_MESSAGE =47, |
| #endif /* MTK_DEV_C2K_IRAT */ |
| |
| /* #else |
| #define CP_MAX_VALID_PAGE_MESSAGE 28 |
| #endif */ |
| CP_CSCH_GENERAL_EXTENSION_MESSAGE =63 /* supported (only Radio Config Parms record used for now) */ |
| |
| } PchMessageTypeE; |
| |
| typedef enum |
| { |
| /* Access Channel Message types */ |
| CP_ACH_REGISTRATION =1, |
| CP_ACH_ORDER =2, |
| CP_ACH_DATA_BURST =3, |
| CP_ACH_ORIGINATION =4, |
| CP_ACH_PAGE_RESPONSE =5, |
| CP_ACH_AUTH_CHALL =6, |
| CP_ACH_STATUS_RESPONSE =7, |
| CP_ACH_TMSI_ASSIGNMENT_COMP =8, |
| CP_ACH_PACA_CANCEL =9, |
| CP_ACH_EXT_STATUS_RESPONSE =10, |
| CP_ACH_RECONNECT =15, |
| CP_ACH_LAST_MESSAGE =16 |
| }AchMessageTypeE; |
| |
| typedef enum |
| { |
| CP_FTC_NO_MESSAGE, |
| CP_FTC_ORDER_MESSAGE, |
| CP_FTC_AUTHENTICATION_CHALLENGE_MESSAGE, |
| CP_FTC_ALERT_WITH_INFO_MESSAGE, |
| CP_FTC_DATA_BURST_MESSAGE, |
| CP_FTC_HANDOFF_DIRECTION_MESSAGE, |
| CP_FTC_ANALOG_HANDOFF_DIRECTION_MESSAGE, |
| CP_FTC_IN_TRAFFIC_SYSTEM_PARAMETERS_MESSAGE, |
| CP_FTC_NEIGHBOR_LIST_UPDATE_MESSAGE, |
| CP_FTC_SEND_BURST_DTMF_MESSAGE, |
| CP_FTC_POWER_CONTROL_PARAMETERS_MESSAGE, |
| CP_FTC_RETRIEVE_PARAMETERS_MESSAGE, |
| CP_FTC_SET_PARAMETERS_MESSAGE, |
| CP_FTC_SSD_UPDATE_MESSAGE, |
| CP_FTC_FLASH_WITH_INFORMATION_MESSAGE, |
| CP_FTC_MOBILE_STATION_REGISTERED_MESSAGE, |
| CP_FTC_STATUS_REQUEST_MESSAGE, |
| CP_FTC_EXTENDED_HANDOFF_DIRECTION_MESSAGE, |
| CP_FTC_SERVICE_REQUEST_MESSAGE, |
| CP_FTC_SERVICE_RESPONSE_MESSAGE, |
| CP_FTC_SERVICE_CONNECT_MESSAGE, |
| CP_FTC_SERVICE_OPTION_CONTROL_MESSAGE, |
| CP_FTC_TMSI_ASSIGNMENT_MESSAGE, |
| CP_FTC_SERVICE_REDIRECTION_MESSAGE, |
| CP_FTC_SUPPLEMENTAL_CHANNEL_ASSIGNMENT_MESSAGE, |
| CP_FTC_POWER_CONTROL_MESSAGE, |
| CP_FTC_EXTENDED_NEIGHBOR_LIST_UPDATE_MESSAGE, |
| CP_FTC_CANDIDATE_FREQUENCY_SEARCH_REQUEST_MESSAGE, |
| CP_FTC_CANDIDATE_FREQUENCY_SEARCH_CONTROL_MESSAGE, |
| CP_FTC_POWER_UP_FUNCTION_MESSAGE, |
| CP_FTC_POWER_UP_FUNCTION_COMPLETION_MESSAGE, |
| CP_FTC_GENERAL_HANDOFF_DIRECTION_MESSAGE = 31, |
| CP_FTC_RESOURCE_ALLOCATION_MESSAGE = 32, |
| CP_FTC_EXTENDED_RELEASE_MESSAGE = 33, |
| CP_FTC_UNIVERSAL_HANDOFF_DIRECTION_MESSAGE = 34, |
| CP_FTC_EXTENDED_SUPPLEMENTAL_CHANNEL_ASSIGNMENT_MESSAGE = 35, |
| CP_FTC_MOBILE_ASSISTED_BURST_OPERATION_PARAMETERS_MESSAGE = 36, |
| CP_FTC_USER_ZONE_REJECT_MESSAGE = 37, |
| CP_FTC_USER_ZONE_UPDATE_MESSAGE = 38, |
| CP_FTC_EXTENDED_ALERT_WITH_INFORMATION_MESSAGE = 40, |
| CP_FTC_EXTENDED_FLASH_WITH_INFORMATION_MESSAGE =42, |
| CP_FTC_RATE_CHANGE_MESSAGE = 51, |
| CP_FTC_MEID_UNIVERSAL_HANDOFF_DIRECTION_MESSAGE = 53, |
| CP_FTC_RADIO_CONFIG_PARAM_MESSAGE = 54, |
| CP_FTC_MAX_MESSAGES, |
| CP_FTC_GENERAL_EXTENSION_MESSAGE = 255 /* special case */ |
| } FTCMessageType; |
| |
| typedef enum |
| { |
| CP_RTC_ORDER_MESSAGE = 1, |
| CP_RTC_AUTHENTICATION_CHALLENGE_RESPONSE_MESSAGE, |
| CP_RTC_FLASH_WITH_INFORMATION_MESSAGE, |
| CP_RTC_DATA_BURST_MESSAGE, |
| CP_RTC_PILOT_STRENGTH_MEASUREMENT_MESSAGE, |
| CP_RTC_POWER_MEASUREMENT_REPORT_MESSAGE, |
| CP_RTC_SEND_BURST_DTMF_MESSAGE, |
| CP_RTC_STATUS_MESSAGE, |
| CP_RTC_ORIGINATION_CONTINUATION_MESSAGE, |
| CP_RTC_HANDOFF_COMPLETION_MESSAGE, |
| CP_RTC_PARAMETERS_RESPONSE_MESSAGE, |
| CP_RTC_SERVICE_REQUEST_MESSAGE, |
| CP_RTC_SERVICE_RESPONSE_MESSAGE, |
| CP_RTC_SERVICE_CONNECT_COMPLETION_MESSAGE, |
| CP_RTC_SERVICE_OPTION_CONTROL_MESSAGE, |
| CP_RTC_STATUS_RESPONSE_MESSAGE, |
| CP_RTC_TMSI_ASSIGNMENT_COMPLETION_MESSAGE, |
| CP_RTC_SUPPLEMENTAL_CHANNEL_REQUEST_MESSAGE, |
| CP_RTC_CANDIDATE_FREQUENCY_SEARCH_RESPONSE_MESSAGE, |
| CP_RTC_CANDIDATE_FREQUENCY_SEARCH_REPORT_MESSAGE, |
| CP_RTC_PERIODIC_PILOT_STRENGTH_MEASUREMENT_MESSAGE, |
| CP_RTC_OUTER_LOOP_REPORT_MESSAGE, |
| CP_RTC_RESOURCE_REQUEST_MESSAGE = 23, |
| CP_RTC_EXTENDED_RELEASE_RESPONSE_MESSAGE = 24, |
| CP_RTC_EXTENDED_PILOT_STRENGTH_MEASUREMENT_MESSAGE=28, |
| CP_RTC_EXTENDED_HANDOFF_COMPLETION_MESSAGE = 29, |
| CP_RTC_RESOURCE_RELEASE_REQUEST_MESSAGE = 30, |
| CP_RTC_MAX_MESSAGES |
| } RTCMessageType; |
| |
| |
| /***************************************************************************** |
| * Defines |
| ****************************************************************************/ |
| #define CP_SYSTIME_SIZE 5 /* # bytes to hold 36 bits */ |
| #define ENG_SUPERFRAME_COUNT 4 /* 4 frames to a superframe */ |
| typedef kal_uint32 WbiosSystime; /* holds system time - 32 bits */ |
| |
| /**************************************************************************** |
| * Sync Channel message structures |
| ****************************************************************************/ |
| |
| /* define set of allowable page channel data rates */ |
| typedef enum |
| { |
| PRAT_9600=0, |
| PRAT_4800 |
| } PageChRate; |
| |
| /* define set of allowable BCCH data rates */ |
| typedef enum |
| { |
| SR1_BRAT_4800 = 0, |
| SR1_BRAT_9600 =1, |
| SR1_BRAT_19200 =2, |
| SR1_BRAT_REVERSED =3 |
| } BcchRate; |
| |
| /* define set of allowable SR1 TD Modes */ |
| typedef enum |
| { |
| SR1_OTD = 0, |
| SR1_STS =1, |
| SR1_TD_NOT_USED |
| } Sr1TdModes; |
| |
| /* define set of allowable SR1 TD Power Level */ |
| typedef enum |
| { |
| SR1_9DB = 0, |
| SR1_6DB = 1, |
| SR1_3DB = 2, |
| SR1_SAME_DB =3, |
| SR1_TD_POWER_NOT_USED |
| } Sr1TdPowerLevel; |
| |
| /* Position of the Primary SR3 Pilot */ |
| typedef enum |
| { |
| SR3_LOWEST_FREQ = 0, |
| SR3_CENTER_FREQ = 1, |
| SR3_HIGHEST_FREQ = 2, |
| SR3_RESERVED = 3 |
| } Sr3PilotPosition; |
| |
| /* Pilot Transmission Power */ |
| typedef enum |
| { |
| SR3_0_DB = 0, |
| SR3_1_DB = 1, |
| SR3_2_DB = 2, |
| SR3_3_DB = 3, |
| SR3_4_DB = 4, |
| SR3_5_DB = 5, |
| SR3_6_DB = 6, |
| SR3_7_DB = 7 |
| } Sr3PilotPower; |
| |
| /* Sync message contents */ |
| typedef struct |
| { |
| kal_uint8 length; /* Message Length */ |
| kal_uint8 msgType; /* Message Type */ |
| kal_uint8 pRev; /* Protocol Revision Level */ |
| kal_uint8 minPRev; /* Minimum protocol revision required by MS */ |
| kal_uint16 sid; /* System ID */ |
| kal_uint16 nid; /* Network ID */ |
| kal_uint16 pilotPN; /* Pilot PN sequence offset index */ |
| kal_uint8 lcState[6]; /* Long code state - 42 bits */ |
| kal_uint8 sysTime[CP_SYSTIME_SIZE]; /* System time - 36 bits */ |
| kal_uint8 lpSec; /* Number of leap seconds */ |
| kal_uint8 ltmOff; /* Offset of local time from system time */ |
| kal_bool daylt; /* Daylight savings time indicator */ |
| PageChRate prat; /* Paging channel data rate */ |
| kal_uint16 cdmaFreq; /* Paging channel */ |
| kal_uint16 extCdmaFreq; /* For RC2 or greater or supports QPCH */ |
| kal_bool sr1BcchSupported; /* Contains BCCH information */ |
| kal_bool sr1NonTdFreqIncl; |
| kal_uint16 sr1CdmaFreqNonTd; |
| BcchRate sr1BratNonTd; |
| kal_uint8 sr1CratNonTd; |
| kal_uint8 sr1BcchCodeChanNonTd; |
| kal_bool sr1TdIncl; |
| kal_uint16 sr1CdmaFreqTd; |
| BcchRate sr1BratTd; |
| kal_uint8 sr1CratTd; |
| kal_uint8 sr1BcchCodeChanTd; |
| Sr1TdModes sr1TdMode; |
| Sr1TdPowerLevel sr1TdPowerLevel; |
| /* SR3 Parameters */ |
| kal_bool sr3Incl; |
| kal_bool sr3CenterFreqIncl; |
| kal_uint16 sr3CenterFreq; |
| BcchRate sr3Brat; |
| kal_uint8 sr3BcchCodeChan; |
| Sr3PilotPosition sr3PrimaryPilot; |
| Sr3PilotPower sr3PilotPower1; |
| Sr3PilotPower sr3PilotPower2; |
| /* BCY 11/14/00 */ |
| kal_bool dsIncl; |
| kal_uint32 dsBlob; |
| } SyncMessage; |
| |
| /* Sync message structure for engine */ |
| typedef struct |
| { |
| kal_uint16 startFrame; /* first frame message was received in */ |
| kal_uint16 endFrame; /* last frame of message */ |
| SyncMessage msg; /* message contents */ |
| } SyncChannelMessage; |
| |
| |
| |
| /* Traffic channel message transmission control */ |
| typedef enum |
| { |
| TX_OFF = 0, |
| TX_ON_IMMEDIATE, |
| TX_ON_CF_RULES |
| } TXControl; |
| |
| |
| #define TX_CONTINUOUS 0 |
| typedef enum |
| { |
| RTC_PREAMBLE = 0, |
| RTC_SIGNALING_ONLY, |
| RTC_TRAFFIC |
| } RTCTraffic; |
| |
| |
| typedef enum |
| { |
| CF_PERIODIC_SEARCH_OFF, |
| CF_PERIODIC_SEARCH_ENABLED, |
| CF_PERIODIC_SEARCH_DISABLED |
| } CFPeriodicSearchCtl; |
| |
| |
| typedef enum |
| { |
| L2_INACTIVE, |
| L2_IDLE, |
| L2_FILL_MESSAGE, |
| L2_HOLD |
| } L2_STATE; |
| |
| |
| typedef enum |
| { |
| L2_FTC_STOP_ST, |
| L2_FTC_INITIALIZATION_ST, |
| L2_FTC_IDLE_ST, |
| L2_FTC_HARD_HANDOFF_ST, |
| L2_FTC_CANDIDATE_FREQUENCY_ST, |
| L2_FTC_HARD_HANDOFF_W_RETURN_ON_FAILURE_ST, |
| L2_FTC_HARD_HANDOFF_INIT_ST, |
| L2_FTC_HARD_HANDOFF_W_RTN_ON_FAIL_INIT_ST, |
| L2_FTC_NST_TRFFIC_ST, |
| L2_FTC_MAX_STATES |
| } L2FTCState; |
| |
| |
| typedef enum |
| { |
| L2_FTC_START_EV, |
| L2_FTC_STOP_EV, |
| L2_FTC_FRAME_EV, |
| L2_FTC_HARD_HANDOFF_EV, |
| L2_FTC_CANDIDATE_FREQUENCY_START_EV, |
| L2_FTC_CANDIDATE_FREQUENCY_END_EV, |
| /* SNR HHO 11/2/00 */ |
| L2_FTC_HARD_HANDOFF_W_RETURN_ON_FAILURE_EV, |
| L2_FTC_HARD_HANDOFF_TIMER_EXPIRED_EV, |
| L2_FTC_MAX_EVENTS |
| } L2FTCEvent; |
| |
| #define CP_MAX_MUX1_CATEGORY 14 |
| #define CP_MAX_MUX2_CATEGORY 26 |
| #define CP_MAX_MUX1_DCCH_CATEGORY 15 |
| #define CP_MAX_MUX2_DCCH_CATEGORY 27 |
| #define CP_MAX_SCH0_CATEGORY 7 |
| #define CP_MAX_BCCH_CATEGORY 5 |
| #define CP_MAX_FCCCH_CATEGORY 4 |
| |
| #define F_PCH 0 |
| #define F_BCCH 1 |
| #define F_FCCCH 2 |
| |
| #if defined (MTK_CBP) |
| /* define the MIN half frames number to calculate the vaild half frames percent */ |
| #define MIN_HALF_FRAMES 200 |
| #endif |
| #define PCH_FRAME_LENGTH 24 /* units: Bytes */ |
| |
| /* Multiplex Option 1 Category definitions */ |
| typedef enum |
| { /*bps Rate D&B B&B Primary Signalling Secondary */ |
| MUX1_CAT1 = 1, /*9600 1 Primary */ |
| MUX1_CAT2 = 2, /*9600 1/2 D&B Primary Signalling */ |
| MUX1_CAT3 = 3, /*9600 1/4 D&B Primary Signalling */ |
| MUX1_CAT4 = 4, /*9600 1/8 D&B Primary Signalling */ |
| MUX1_CAT5 = 5, /*9600 1 B&B Signalling */ |
| MUX1_CAT6 = 6, /*4800 1/2 Primary */ |
| MUX1_CAT7 = 7, /*2400 1/4 Primary */ |
| MUX1_CAT8 = 8, /*1200 1/8 Primary */ |
| MUX1_CAT9 = 9, /*9600 1 with bit errors */ |
| MUX1_CAT10 = 10, /* Frame with insufficient frame quality */ |
| MUX1_CAT11 = 11, /*9600 1/2 D&B Primary Secondary */ |
| MUX1_CAT12 = 12, /*9600 1/4 D&B Primary Secondary */ |
| MUX1_CAT13 = 13, /*9600 1/8 D&B Primary Secondary */ |
| MUX1_CAT14 = 14, /*9600 1 B&B Secondary */ |
| MUX1_CAT15 = 15 /*9600 1 DCCH NULL Frame */ |
| } Mux1Cat; |
| |
| /* Multiplex Option 2 Category definitions */ |
| typedef enum |
| { /*bps Rate D&B B&B Primary Signalling Secondary */ |
| MUX2_CAT1 = 1, /*14400 1 Primary */ |
| MUX2_CAT2 = 2, /*14400 1/2 D&B Primary Signalling */ |
| MUX2_CAT3 = 3, /*14400 1/4 D&B Primary Signalling */ |
| MUX2_CAT4 = 4, /*14400 1/8 D&B Primary Signalling */ |
| MUX2_CAT5 = 5, /*14400 1 B&B Signalling */ |
| MUX2_CAT6 = 6, /*14400 1/2 D&B Primary Secondary */ |
| MUX2_CAT7 = 7, /*14400 1/4 D&B Primary Secondary */ |
| MUX2_CAT8 = 8, /*14400 1/8 D&B Primary Secondary */ |
| MUX2_CAT9 = 9, /*14400 1 B&B Secondary */ |
| MUX2_CAT10 = 10, /*14400 1/8 D&B Primary Signalling Secondary */ |
| MUX2_CAT11 = 11, /*7200 1 Primary */ |
| MUX2_CAT12 = 12, /*7200 1/4 D&B Primary Signalling */ |
| MUX2_CAT13 = 13, /*7200 1/8 D&B Primary Signalling */ |
| MUX2_CAT14 = 14, /*7200 1 B&B Signalling */ |
| MUX2_CAT15 = 15, /*7200 1/4 D&B Primary Secondary */ |
| MUX2_CAT16 = 16, /*7200 1/8 D&B Primary Secondary */ |
| MUX2_CAT17 = 17, /*7200 1 B&B Secondary */ |
| MUX2_CAT18 = 18, /*7200 1/8 D&B Primary Signalling Secondary */ |
| MUX2_CAT19 = 19, /*3600 1 Primary */ |
| MUX2_CAT20 = 20, /*3600 1/8 D&B Primary Signalling */ |
| MUX2_CAT21 = 21, /*3600 1 B&B Signalling */ |
| MUX2_CAT22 = 22, /*3600 1/8 D&B Primary Secondary */ |
| MUX2_CAT23 = 23, /*3600 1 B&B Secondary */ |
| MUX2_CAT24 = 24, /*1800 1 Primary */ |
| MUX2_CAT25 = 25, /*1800 1 B&B Secondary */ |
| MUX2_CAT26 = 26, /* Frame with insufficient frame quality */ |
| MUX2_CAT27 = 27 /*1800 1 DCCH NULL Frame */ |
| } Mux2Cat; |
| |
| #ifdef MTK_PLT_ON_PC_UT |
| #define MAX_TMSI_ZONE_LEN 16 |
| #endif |
| |
| /***************************************************************************** |
| * Data Structures |
| ****************************************************************************/ |
| |
| /* Sync Channel Frame Indication data */ |
| typedef struct |
| { |
| kal_uint16 frameNum; /* count of received sync frames modulo 2048 */ |
| kal_uint8 *data; /* pointer to 32 bits of frame data */ |
| } SyncFrame; |
| |
| /* Page Channel Frame Indication data */ |
| typedef struct |
| { |
| WbiosSystime sysTime; /* system time frame received in */ |
| kal_uint16 size; /* size of data in bits */ |
| kal_uint8 *data; /* pointer to frame data, including SCI bits */ |
| } PageFrame; |
| |
| /* FCCCH Frame Indication data */ |
| typedef struct |
| { |
| WbiosSystime sysTime; /* system time frame received in */ |
| kal_uint16 size; /* size of data in bits */ |
| kal_uint8 *data; /* pointer to frame data, including SI bits */ |
| } FCCCHFrame; |
| |
| /* BCCH Frame Indication data */ |
| typedef struct |
| { |
| WbiosSystime sysTime; /* system time frame received in */ |
| kal_uint16 size; /* size of data in bits */ |
| kal_uint8 *data; /* pointer to frame data, including SCI bits */ |
| } BCCHFrame; |
| |
| /* Page Channel Message structure provides the packed buffer and relevant */ |
| /* system information. */ |
| typedef struct |
| { |
| WbiosSystime somTime; /* time the start of msg received */ |
| WbiosSystime sysTime; /* system time from last frame */ |
| kal_bool ackReceived; /* set KAL_TRUE if a VALID ACK for an */ |
| /* outstanding ack was received in */ |
| /* this message, else set to KAL_FALSE */ |
| |
| kal_uint16 length; /* length of message */ |
| kal_uint8 type; /* message type */ |
| kal_uint8 *msgBuffer; /* pointer to packed message buffer*/ |
| kal_uint16 sduOffset; /* offset to first bit in L3 SDU */ |
| kal_uint8 PD_value; /* Protocol Discriminator*/ |
| kal_uint8 ChanType; /* Channel Type: PCH, BCCH, FCCCH*/ |
| #if defined(MTK_CBP) |
| kal_bool duplicateMsg; /* Indicate it is a duplicate message or not, |
| * KAL_TRUE: ignore the messge body |
| */ |
| #endif |
| kal_uint16 geRecordsInc; /* if GEM, this will be updated with bitmap of records included */ |
| } PChMessage; |
| |
| |
| /* BCY 08/28/00: !!! Need to change all PCHMessage to FcschMessage */ |
| typedef PChMessage FcschMessage; |
| |
| #ifdef MTK_PLT_ON_PC_UT |
| /* LAC field of Page Channel Message, used for UT */ |
| typedef struct |
| { |
| kal_uint8 msgType; /* 8 bits */ |
| kal_uint8 msgLen; /* 8 bits */ |
| kal_uint8 ackSeq; /* 3 bits */ |
| kal_uint8 msgSeq; /* 3 bits */ |
| kal_bool ackReq; |
| kal_bool validAck; |
| kal_uint8 addrType; /* 3 bits */ |
| kal_uint8 addrLen; /* 4 bits */ |
| kal_uint32 imsi_s1; /* 24 bits IMSI_S1 value */ |
| kal_uint16 imsi_s2; /* 10 bits IMSI_S2 value */ |
| kal_uint32 esn; /* 32 bits ESN value */ |
| kal_uint8 imsiClass; /* 1 bits imsi class value */ |
| kal_uint8 imsiClassType; /* 2 bits if class0, 1 bit if class1 */ |
| kal_uint16 mcc; /* 10 bits for MCC value */ |
| kal_uint8 imsi_11_12; /* 7 bits */ |
| kal_uint8 imsiAddrNum; /* 3 bits */ |
| kal_uint32 tmsiCode; /* 16 or 24 or 32 bits according to addrLen */ |
| kal_uint8 bcastAddr[CP_BCAST_ADDRESS_MAX_SIZE]; /* length of array is addrLen */ |
| /* following is only for paging record if any */ |
| kal_bool validPagingRec; |
| kal_uint8 addrClass; /* 2 bits */ |
| kal_uint8 addrSubclass; /* 2 bits */ |
| kal_uint8 tmsiZoneLen; /* 4 bits */ |
| kal_uint8 tmsiZone[MAX_TMSI_ZONE_LEN]; |
| kal_uint8 burstType; /* 6 bits */ |
| kal_uint8 burstAddrLen; /* 4 bits */ |
| /* following is for CAM/ECAM/MEID ECAM */ |
| kal_uint8 assignMode; /* 3 bits */ |
| } PCHMessageLACField; |
| #endif |
| |
| typedef enum |
| { |
| MUX_OPTION_INVALID = 0, |
| MUX_OPTION1 = 1, |
| MUX_OPTION2, |
| MUX_OPTION3, |
| MUX_OPTION4, |
| MUX_OPTION5, |
| MUX_OPTION6, |
| MUX_OPTION7, |
| MUX_OPTION8, |
| MUX_OPTION9, |
| MUX_OPTION10, |
| MUX_OPTION11, |
| MUX_OPTION12, |
| MUX_OPTION13, |
| MUX_OPTION14, |
| MUX_OPTION15, |
| MUX_OPTION16, |
| MUX_OPTION704 = 0x704, |
| MUX_OPTION809 = 0x809, |
| MUX_OPTION80A = 0x80A, |
| MUX_OPTION811 = 0x811, |
| MUX_OPTION812 = 0x812, |
| MUX_OPTION821 = 0x821, |
| MUX_OPTION822 = 0x822, |
| MUX_OPTION905 = 0x905, |
| MUX_OPTION906 = 0x906, |
| MUX_OPTION909 = 0x909, |
| MUX_OPTION90A = 0x90A, |
| MUX_OPTION911 = 0x911, |
| MUX_OPTION912 = 0x912, |
| MUX_OPTION921 = 0x921, |
| MUX_OPTION922 = 0x922, |
| MUX_OPTIONF00 = 0xF00, /* PDCH Mux Option */ |
| MUX_OPTIONF20 = 0xF20 |
| |
| } MultiplexOption; |
| |
| /* Traffic Channel Frame Indication data */ |
| typedef struct |
| { |
| WbiosSystime sysTime; /* system time frame received in */ |
| MultiplexOption muxOption; /* multiplex option used in deriving frame */ |
| kal_uint8 category; /* frame category # - depends on mux_option */ |
| kal_uint8 quality; /* good or bad frame based on category & mux */ |
| kal_uint16 sigBits; |
| kal_uint8* data; /* ptr to traffic data (cat. determines len) */ |
| } TCFrame; |
| |
| typedef struct |
| { |
| /* SNR ACK 1/30/01 */ |
| kal_uint8 ackReq; |
| WbiosSystime sysTime; |
| kal_uint8 length; |
| kal_uint8 sduEncryptMode; |
| kal_uint8 encSeq; |
| kal_uint8 extMsgLength; |
| kal_uint8 type; |
| kal_uint8 encryption; |
| kal_uint16 pduStartIndex; /* Start of L3 PDU */ |
| kal_uint16 geRecordsInc; /* if GEM, this will be updated with bitmap of records included */ |
| kal_uint8* buffer; /* pointer to packed message buffer */ |
| } FTCMessage; |
| |
| #ifdef MTK_PLT_ON_PC_UT |
| typedef struct |
| { |
| kal_uint8 msgLen; /* 8 bits */ |
| kal_uint8 msgType; /* 8 bits */ |
| kal_uint8 ackSeq; /* 3 bits */ |
| kal_uint8 msgSeq; /* 3 bits */ |
| kal_uint8 ackReq; /* 1 bit */ |
| kal_uint8 encryption; /* 2 bits */ |
| } FTCMessageLACField; |
| #endif |
| |
| |
| typedef struct |
| { |
| kal_bool resetFpc; |
| kal_uint8 pwrRepThresh; |
| kal_uint8 pwrRepFrames; |
| kal_bool pwrThreshEnable; |
| kal_bool pwrPeriodEnable; |
| kal_uint8 pwrRepDelay; |
| } PCNPMData; |
| |
| #endif /* _PSWAIRMSG_H_ */ |
| |