| /****************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2016 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *******************************************************************************/ |
| |
| /****************************************************************************** |
| * Filename: |
| * -------------------------------------------------------- |
| * lpp_lppe_def.h |
| * |
| * Project: |
| * -------------------------------------------------------- |
| * |
| * |
| * Description: |
| * -------------------------------------------------------- |
| * LPP/LPP Extension Interface - Macro Definition |
| * |
| * Author: |
| * -------------------------------------------------------- |
| * ------- |
| * |
| * -------------------------------------------------------- |
| * $Log$ |
| * |
| * 09 07 2018 jie-yu.wang |
| * [MOLY00350925] [LPPe] AT&T v18.2 requirement for LPPe MAC Address |
| * [VMOLY][LPPe] AT&T MAC Address report. |
| * |
| * 03 15 2018 jie-yu.wang |
| * [MOLY00311925] Code sync from R3. |
| * |
| * 10 20 2017 roland.li |
| * [MOLY00284361] [LPPe][VzW] LPPe early fix feature |
| * |
| * . |
| * |
| * 09 06 2016 doug.shih |
| * [LPPe] interface design |
| * . |
| * |
| * 08 24 2016 doug.shih |
| * [LPPe] interface design |
| * . |
| * |
| * |
| *****************************************************************************/ |
| |
| #ifndef _LPP_LPPE_DEF_H |
| #define _LPP_LPPE_DEF_H |
| |
| #include "kal_public_api.h" |
| #include "kal_public_defs.h" |
| #include "kal_general_types.h" |
| |
| /** |
| * Nine LPPe sessions in parallel should be the worst case: |
| * AD/LI procedure for HA GNSS, WLAN AP, SENSOR PRESSURE, SRN BT and plus on CAPA proceudre |
| */ |
| #define LPP_EXT_MAX_SESSION_COUNT 9 |
| #define LPP_EXT_SESSION_MAX_POS_METHOD_COUNT 4 /* HA GNSS, WLAN AP, SENSOR PRESSURE, SRN BT */ |
| |
| #define LPP_EXT_RESPONSE_TIMER_MAX_SUPPORT_NUM 3 /* for maximum two parallel transactions which need response time control (WLAN, BT, SENSOR), NETWORK has another timer ID */ |
| |
| |
| #define LPP_EXT_MAX_DL_EPDU_BUFFER_COUNT 1 /* for multiple segmented downlink AD EPDU received in a short time */ |
| #define LPP_EXT_MAX_UL_EPDU_BUFFER_COUNT 1 /* for multiple segmented uplink EPDU sent in a short time */ |
| |
| /* LPPe version and compatible level */ |
| #define LPP_EXT_MAX_SUPPORT_VER_MAJOR_VER 1 /* fill capability when init, and check when receive message */ |
| #define LPP_EXT_MAX_SUPPORT_VER_MINOR_VER 0 /* fill capability when init, and check when receive message */ |
| #define LPP_EXT_SUPPORT_COMPATIBILITY_LEVEL 0 /* fill capability when init, and check when receive message */ |
| |
| /* location soruce method bitmask, 8 bit presentation */ |
| #define LOC_SRC_METHOD_AGNSS 0x01 |
| #define LOC_SRC_METHOD_WLAN_AP 0x02 |
| #define LOC_SRC_METHOD_SRN 0x04 |
| #define LOC_SRC_METHOD_SENSOR 0x08 |
| |
| #define WLAN_MAX_DATA_SET_ELEMENT 8 /* maxWLANDataSets */ |
| #define WLAN_AP_MAX_DATA_ELEMENT 128 /* maxWLANAPs */ |
| #define WLAN_AP_MAX_TYPE_DATA_ELEMENT 5 /* maxWLANTypes */ |
| #define WLAN_FEMTO_MAX_AREA_ELEMENT 16 |
| |
| /* SRN assistance data element */ |
| #define SRN_MAX_SRN_GROUP_ELEMENT 64 /* one SRN group might consist of all the SRNs located in one floor of a building. Up to 64 groups can be provided in the same IE */ |
| #define SRN_MAX_SRN_INFO_ELEMENT 1024 |
| #define SRN_MAX_GROUP_UPDATE_RSP_ELEMENT 8 |
| #define SRN_MAX_TARGET_DEVICE_ERR_ELEMENT 16 |
| #define SRN_MAX_CATEGORY_ELEMENT 16 |
| #define SRN_MAX_GROUP_ELEMENT 256 |
| #define SRN_MAX_GROUP_UPDATE_REQ_ELEMENT 64 |
| #define SRN_MAX_ANTENNA_REQ_ELEMENT 8 |
| |
| /* SRN location request info category, for save memory and buffer usage set 16->2 */ |
| #define SRN_MAX_LOC_REQ_INFO_CATEGORY_ELEMENT 2 |
| |
| /* IP address list */ |
| #define LOC_IP_ADDR_MAX_ELEMENT 5 |
| |
| /* WLAN location info list */ |
| #define WLAN_AP_MAX_LOC_INFO_LIST_ELEMENT 64 |
| #define WLAN_AP_MAX_SSID_OCTET 32 |
| |
| /* Sensor motion state list */ |
| #define SENSOR_MAX_MOTION_STATE_ELEMENT 8 |
| #define SENSOR_MAX_CALIBRATION_POINT 10 |
| |
| /* SRN measurement list */ |
| #define SRN_MAX_MEASUREMENT_ELEMENT 64 |
| #define SRN_MAX_SRN_MEASUREMENT_ELEMENT 64 |
| |
| |
| #define WLAN_AP_LOC_DATA_LCI_LATITUDE_RESOLUTION_BITMASK 0x3F /* 6 bits, IE use 1 byte */ |
| #define WLAN_AP_LOC_DATA_LCI_LATITUDE_BITMASK 0x00000003FFFFFFFF /* 34 bits, IE use 8 byte */ |
| #define WLAN_AP_LOC_DATA_LCI_LONGITUDE_RESOLUTION_BITMASK 0x3F /* 6 bits, IE use 1 byte */ |
| #define WLAN_AP_LOC_DATA_LCI_LONGITUDE_BITMASK 0x00000003FFFFFFFF /* 34 bits, IE use 8 byte */ |
| #define WLAN_AP_LOC_DATA_LCI_ALTITUDE_TYPE_BITMASK 0x0F /* 4 bits, IE use 1 byte */ |
| #define WLAN_AP_LOC_DATA_LCI_ALTITUDE_RESOLUTION_BITMASK 0x3F /* 6 bits, IE use 1 byte */ |
| #define WLAN_AP_LOC_DATA_LCI_ALTITUDE_BITMASK 0x3FFFFFFF /* 30 bits, IE use 4 byte */ |
| #define WLAN_AP_LOC_DATA_LCI_DATUM_BITMASK 0xFF /* 8 bits, IE use 1 byte */ |
| |
| |
| #define WLAP_AP_ID_MAC_ADDR_BITMASK 0xFFFFFFFFFFFF /* WLAN AP MAC Address contains 48 bits */ |
| #define BT_ID_MAC_ADDR_BITMASK 0xFFFFFFFFFFFF /* the MAC address of the SRN for BT and BT LE as per [IEEE 802.15.1] */ |
| |
| |
| /* for wlan_ap_location_server_err_cause_struct = not all AD available, 16 bit presentation */ |
| #define WLAN_AP_LOC_SRV_ERR_AP_MANDATORY_DATA_UNAVAILABLE 0x0800 |
| #define WLAN_AP_LOC_SRV_ERR_AP_LOCATIONS_UNAVAILABLE 0x0400 |
| #define WLAN_AP_LOC_SRV_ERR_AP_LOCATION_RELIABILITY_UNAVAILABLE 0x0200 |
| #define WLAN_AP_LOC_SRV_ERR_AP_TRANSMIT_POWER_UNAVAILABLE 0x0100 |
| #define WLAN_AP_LOC_SRV_ERR_AP_ANTENNA_GAIN_UNAVAILABLE 0x0080 |
| #define WLAN_AP_LOC_SRV_ERR_AP_COVERAGE_AREA_UNAVAILABLE 0x0040 |
| #define WLAN_AP_LOC_SRV_ERR_NON_SERVING_AD_UNAVAILABLE 0x0020 |
| #define WLAN_AP_LOC_SRV_ERR_AP_TP_NOT_AVAILABLE 0x0010 |
| #define WLAN_AP_LOC_SRV_ERR_AP_AG_NOT_AVAILABLE 0x0008 |
| #define WLAN_AP_LOC_SRV_ERR_UE_SN_NOT_AVAILABLE 0x0004 |
| #define WLAN_AP_LOC_SRV_ERR_UE_RSSI_NOT_AVAILABLE 0x0002 |
| #define WLAN_AP_LOC_SRV_ERR_OC_NOT_AVAILABLE 0x0001 |
| |
| |
| /* for wlan_ap_target_device_err_cause_struct = not all requested measurement possible, 32 bit presentation */ |
| #define WLAN_AP_TGT_DEV_ERR_AP_SSID_NOT_AVAILABLE 0x00010000 |
| #define WLAN_AP_TGT_DEV_ERR_AP_SN_MEASUREMENT_NOT_POSSIBLE 0x00008000 |
| #define WLAN_AP_TGT_DEV_ERR_AP_DEV_TYPE_NOT_AVAILABLE 0x00004000 |
| #define WLAN_AP_TGT_DEV_ERR_AP_PHY_TYPE_NOT_AVAILABLE 0x00002000 |
| #define WLAN_AP_TGT_DEV_ERR_AP_RSSI_MEASUREMENT_NOT_POSSIBLE 0x00001000 |
| #define WLAN_AP_TGT_DEV_ERR_AP_CHAN_FREQ_NOT_AVAILABLE 0x00000800 |
| #define WLAN_AP_TGT_DEV_ERR_AP_RTD_MEASUREMENT_NOT_POSSIBLE 0x00000400 |
| #define WLAN_AP_TGT_DEV_ERR_UE_TP_NOT_AVAILABLE 0x00000200 |
| #define WLAN_AP_TGT_DEV_ERR_UE_AG_NOT_AVAILABLE 0x00000100 |
| #define WLAN_AP_TGT_DEV_ERR_AP_REC_LOC_NOT_AVAILABLE 0x00000080 |
| #define WLAN_AP_TGT_DEV_ERR_NON_SERVING_MEASUREMENT_NOT_AVAILABLE 0x00000040 |
| #define WLAN_AP_TGT_DEV_ERR_HISTORIC_MEASUREMENT_NOT_AVAILABLE 0x00000020 |
| #define WLAN_AP_TGT_DEV_ERR_AP_TP_NOT_AVAILABLE 0x00000010 |
| #define WLAN_AP_TGT_DEV_ERR_AP_AG_NOT_AVAILABLE 0x00000008 |
| #define WLAN_AP_TGT_DEV_ERR_UE_SN_NOT_AVAILABLE 0x00000004 |
| #define WLAN_AP_TGT_DEV_ERR_UE_RSSI_NOT_AVAILABLE 0x00000002 |
| #define WLAN_AP_TGT_DEV_ERR_OC_NOT_AVAILABLE 0x00000001 |
| |
| |
| /* for srn_target_device_error_element_struct = not all requested measurement possible, 8 bit presentation */ |
| #define SRN_TGT_DEV_ERR_RSSI_NOT_AVAILABLE 0x08 |
| #define SRN_TGT_DEV_ERR_RTD_NOT_AVAILABLE 0x04 |
| #define SRN_TGT_DEV_ERR_MULTIPLE_SETS_NOT_AVAILABLE 0x02 |
| #define SRN_TGT_DEV_ERR_HISTORIC_MEASUREMENTS_NOT_AVAILABLE 0x01 |
| |
| |
| /* WLAN AP AD request bitmask, 16 bit presentation */ |
| #define WLAN_AP_REQ_AD_BIT_AP_LIST (1 << 0) /* 0x0001 */ |
| #define WLAN_AP_REQ_AD_BIT_AP_LOCATION (1 << 1) /* 0x0002 */ |
| #define WLAN_AP_REQ_AD_BIT_LOCATION_RELIABILITY (1 << 2) /* 0x0004 */ |
| #define WLAN_AP_REQ_AD_BIT_TRANSMIT_POWER (1 << 3) /* 0x0008 */ |
| #define WLAN_AP_REQ_AD_BIT_ANTENNA_GAIN (1 << 4) /* 0x0010 */ |
| #define WLAN_AP_REQ_AD_BIT_COVERAGE_AREA (1 << 5) /* 0x0020 */ |
| #define WLAN_AP_REQ_AD_BIT_NON_SERVING (1 << 6) /* 0x0040 */ |
| |
| |
| /* WLAN AP AD support bitmask, 16 bit presentation */ |
| #define WLAN_AP_SUPP_AD_BIT_AP_LIST (1 << 0) /* 0x0001 */ |
| #define WLAN_AP_SUPP_AD_BIT_AP_LOCATION (1 << 1) /* 0x0002 */ |
| #define WLAN_AP_SUPP_AD_BIT_LOCATION_RELIABILITY (1 << 2) /* 0x0004 */ |
| #define WLAN_AP_SUPP_AD_BIT_TRANSMIT_POWER (1 << 3) /* 0x0008 */ |
| #define WLAN_AP_SUPP_AD_BIT_ANTENNA_GAIN (1 << 4) /* 0x0010 */ |
| #define WLAN_AP_SUPP_AD_BIT_COVERAGE_AREA (1 << 5) /* 0x0020 */ |
| #define WLAN_AP_SUPP_AD_BIT_NON_SERVING (1 << 6) /* 0x0040 */ |
| |
| |
| /* WLAN AP type bitmask, 16 bit presentation */ |
| #define WLAN_AP_TYPE_LIST_BIT_IEEE802_11A (1 << 0) /* 0x0001 */ |
| #define WLAN_AP_TYPE_LIST_BIT_IEEE802_11B (1 << 1) /* 0x0002 */ |
| #define WLAN_AP_TYPE_LIST_BIT_IEEE802_11G (1 << 2) /* 0x0004 */ |
| #define WLAN_AP_TYPE_LIST_BIT_IEEE802_11N (1 << 3) /* 0x0008 */ |
| #define WLAN_AP_TYPE_LIST_BIT_IEEE802_11AC (1 << 4) /* 0x0010 */ |
| #define WLAN_AP_TYPE_LIST_BIT_IEEE802_11AD (1 << 5) /* 0x0020 */ |
| |
| /* WLAN AP requested measurement type bitmask, 32 bit presentation */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_SSID (1 << 15) /* 0x00008000 */ /* SSID of the WLAN */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_SN (1 << 14) /* 0x00004000 */ /* AP S/N received at the target */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_DEV_TYPE (1 << 13) /* 0x00002000 */ /* AP Device type */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_PHY_TYPE (1 << 12) /* 0x00001000 */ /* AP PHY type */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_RSSI (1 << 11) /* 0x00000800 */ /* AP signal strength at the target (both LPP and LPPe) */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_CH_FREQ (1 << 10) /* 0x00000400 */ /* AP channel/frequency of Tx/Rx */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_RTD (1 << 9) /* 0x00000200 */ /* Round Trip Delay between target and AP (both LPP and LPPe) */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_TRANS_PWR (1 << 8) /* 0x00000100 */ /* target transmit power */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_ANT_GAIN (1 << 7) /* 0x00000080 */ /* target antenna gain */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_RPT_LOC (1 << 6) /* 0x00000040 */ /* AP Location as reported by AP */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_NON_SERVING (1 << 5) /* 0x00000020 */ /* measurements for a non-serving WLAN AP (in addition to a serving WLAN AP) */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_HISTORIC_MEAS (1 << 4) /* 0x00000010 */ /* historic WLAN AP measurements */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_TRANS_PWR (1 << 3) /* 0x00000008 */ /* AP transmit power */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_ANT_GAIN (1 << 2) /* 0x00000004 */ /* AP antenna gain */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_SNR (1 << 1) /* 0x00000002 */ /* UE signal to noise ratio received at the AP */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_RSSI (1 << 0) /* 0x00000001 */ /* target signal strength at the AP */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_OP_CLASS (1 << 19) /* 0x00080000 */ /* operating class */ |
| #define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_MAC_ADDRESS (1 << 18) /* 0x00040000 */ /* ue mac address */ |
| |
| /* WLAN AP measurmenet capability type bitmask, 32 bit presentation */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_SSID (1 << 15) /* 0x00008000 */ /* SSID of the WLAN */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_SN (1 << 14) /* 0x00004000 */ /* AP S/N received at the target */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_DEV_TYPE (1 << 13) /* 0x00002000 */ /* AP Device type */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_PHY_TYPE (1 << 12) /* 0x00001000 */ /* AP PHY type */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_RSSI (1 << 11) /* 0x00000800 */ /* AP signal strength at the target (both LPP and LPPe) */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_CH_FREQ (1 << 10) /* 0x00000400 */ /* AP channel/frequency of Tx/Rx */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_RTD (1 << 9) /* 0x00000200 */ /* Round Trip Delay between target and AP (both LPP and LPPe) */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_TRANS_PWR (1 << 8) /* 0x00000100 */ /* target transmit power */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_ANT_GAIN (1 << 7) /* 0x00000080 */ /* target antenna gain */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_RPT_LOC (1 << 6) /* 0x00000040 */ /* AP Location as reported by AP */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_NON_SERVING (1 << 5) /* 0x00000020 */ /* measurements for a non-serving WLAN AP (in addition to a serving WLAN AP) */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_HISTORIC_MEAS (1 << 4) /* 0x00000010 */ /* historic WLAN AP measurements */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_TRANS_PWR (1 << 3) /* 0x00000008 */ /* AP transmit power */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_ANT_GAIN (1 << 2) /* 0x00000004 */ /* AP antenna gain */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_SNR (1 << 1) /* 0x00000002 */ /* UE signal to noise ratio received at the AP */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_RSSI (1 << 0) /* 0x00000001 */ /* target signal strength at the AP */ |
| #define WLAN_AP_MEAS_CAPA_TYPE_BIT_OP_CLASS (1 << 16) /* 0x00010000 */ /* operating class */ |
| |
| /* WLAN AP additional requested measurement type bitmask, 8 bit presentation */ |
| #define WLAN_AP_ADD_MEAS_REQ_TYPE_BIT_OP_CLASS (1 << 0) /* 0x0001 */ |
| |
| /* WLAN MAC Address size */ |
| #define WLAN_MAC_ADDRESS_SIZE 6 |
| |
| /* BT MAC Address size */ |
| #define BT_MAC_ADDRESS_SIZE 6 |
| |
| /* SRN measurement type bitmask, 8 bit presentation */ |
| #define SRN_MEAS_TYPE_BIT_RSSI (1 << 0) /* 0x01 */ |
| #define SRN_MEAS_TYPE_BIT_RTD (1 << 1) /* 0x02 */ |
| |
| |
| /* SRN assistance data type bitmask, 8 bit presentation */ |
| #define SRN_AD_TYPE_BIT_SRN_GROUP (1 << 0) /* 0x01 */ |
| #define SRN_AD_TYPE_BIT_ANTENNA_PATTERN (1 << 1) /* 0x02 */ |
| |
| |
| /* wireless access type (similar to data bearer) bitmask, 8 bit presentation */ |
| #define WIRELESS_ACCESS_TYPE_GSM (1 << 0) /* 0x01 */ |
| #define WIRELESS_ACCESS_TYPE_UTRA (1 << 1) /* 0x02 */ |
| #define WIRELESS_ACCESS_TYPE_LTE (1 << 2) /* 0x04 */ |
| #define WIRELESS_ACCESS_TYPE_WIFI (1 << 3) /* 0x08 */ |
| #define WIRELESS_ACCESS_TYPE_OTHER (1 << 4) /* 0x10 */ |
| |
| |
| /* WLAN AP location info validity bitmask, 32 bit presentation */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SSID (1 << 0) /* 0x00000001 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_TO_NOISE (1 << 1) /* 0x00000002 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_DEVICE_TYPE (1 << 2) /* 0x00000004 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_PHY_TYPE (1 << 3) /* 0x00000008 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_STRENGTH (1 << 4) /* 0x00000010 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_CH_FREQ (1 << 5) /* 0x00000020 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_ROUND_TRIP_DELAY (1 << 6) /* 0x00000040 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_TRANSMIT_POWER (1 << 7) /* 0x00000080 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_ANTENNA_GAIN (1 << 8) /* 0x00000100 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_REPORTED_LOC (1 << 9) /* 0x00000200 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_TRANSMIT_POWER (1 << 10) /* 0x00000400 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_ANTENNA_GAIN (1 << 11) /* 0x00000800 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_TO_NOISE (1 << 12) /* 0x00001000 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_STRENGTH (1 << 13) /* 0x00002000 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_STRENGTH_DELTA (1 << 14) /* 0x00004000 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_STRENGTH_DELTA (1 << 15) /* 0x00008000 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_TO_NOISE_DELTA (1 << 16) /* 0x00010000 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_TO_NOISE_DELTA (1 << 17) /* 0x00020000 */ |
| #define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_OPERATING_CLASS (1 << 18) /* 0x00040000 */ |
| |
| |
| /* Sensor motion state bitmask, 16 bit presentation */ |
| #define SENSOR_SEC_MOTION_STATE_STATIONARY (1 << 0) /* 0x0001 */ |
| #define SENSOR_SEC_MOTION_STATE_PEDESTRIAN (1 << 1) /* 0x0002 */ |
| #define SENSOR_SEC_MOTION_STATE_RUNNING (1 << 2) /* 0x0004 */ |
| #define SENSOR_SEC_MOTION_STATE_CYCLING (1 << 3) /* 0x0008 */ |
| #define SENSOR_SEC_MOTION_STATE_CAR (1 << 4) /* 0x0010 */ |
| #define SENSOR_SEC_MOTION_STATE_TRAIN (1 << 5) /* 0x0020 */ |
| #define SENSOR_SEC_MOTION_STATE_AEROPLANE (1 << 6) /* 0x0040 */ |
| #define SENSOR_SEC_MOTION_STATE_BOAT (1 << 7) /* 0x0080 */ |
| #define SENSOR_SEC_MOTION_STATE_FIDGETING (1 << 8) /* 0x0100 */ |
| |
| |
| /* IP address type bitmask, 8 bit presentation */ |
| #define IP_ADDR_TYPE_BIT_IP_V4 (1 << 0) /* 0x01 */ |
| #define IP_ADDR_TYPE_BIT_IP_V6 (1 << 1) /* 0x02 */ |
| |
| /* To align AP structure*/ |
| #define MAX_ENUM_VALUE 2147483647 |
| |
| /* LPPe session type bitmask, use one-byte representation */ |
| #define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_NONE 0x00 |
| #define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_WLAN 0x01 |
| #define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_BT 0x02 |
| #define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_SENSOR 0x04 |
| #define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_NETWORK 0x08 |
| #define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_IPADDRESS 0x10 |
| #define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_MAX 0xff |
| |
| /* LPPe DBH results source bitmask */ |
| #define LPPE_LOCATION_SOURCE_BITMASK_AGNSS 0x00000001 |
| #define LPPE_LOCATION_SOURCE_BITMASK_SENSOR 0x00000002 |
| #define LPPE_LOCATION_SOURCE_BITMASK_ECIDLTE 0x00000004 |
| #define LPPE_LOCATION_SOURCE_BITMASK_ECIDGSM 0x00000008 |
| #define LPPE_LOCATION_SOURCE_BITMASK_ECIDUTRA 0x00000010 |
| #define LPPE_LOCATION_SOURCE_BITMASK_WLANAP 0x00000020 |
| #define LPPE_LOCATION_SOURCE_BITMASK_SRN 0x00000040 |
| #endif /* _LPP_LPPE_DEF_H */ |