[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/custom/modem/common/customer_ps_inc.h b/mcu/custom/modem/common/customer_ps_inc.h
new file mode 100644
index 0000000..f3a29a7
--- /dev/null
+++ b/mcu/custom/modem/common/customer_ps_inc.h
@@ -0,0 +1,227 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2005
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * customer_ps_inc.h
+ *
+ * Project:
+ * --------
+ * MAUI
+ *
+ * Description:
+ * ------------
+ * This file is intends for include file of PS customization parameters.
+ *
+ * Author:
+ * -------
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+
+#ifndef _CUSTOMER_PS_INC_H
+#define _CUSTOMER_PS_INC_H
+#ifdef __UNIFIED_MESSAGE_ARCHIVE_SUPPORT__
+#define CM_SMS_MAX_ARMSG_NUM 100
+#endif
+/* For customer define SMS message box number. */
+/* This parameter means total number of SMS stored in SIM and NVRAM can be read. */
+
+/* This value is to define the maximun segment number of EMS short message. */
+#ifdef __EMS_REL5__
+#define MMI_SMS_MAX_MSG_SEG 8
+#else
+#define MMI_SMS_MAX_MSG_SEG 4
+#endif
+
+/* In later branch, each entry costs (46 + 2* MMI_SMS_MAX_MSG_SEG) bytes. */
+#define CM_SMS_MAX_MSG_NUM SMS_TOTAL_ENTRY
+
+/* From 3GPP 23.040, if __EMS_REL5__ is NOT turned ON, segment number shall be */
+/* larger than 8 segments. */
+#ifdef __EMS_REL5__
+#if MMI_SMS_MAX_MSG_SEG < 8
+#error segment number shall be larger than 8 for EMS 5.0
+#endif
+
+#endif
+
+/* The value defines the buffer size for EMS objects, such as pre-defined animation. */
+/* The more of buffer size would support more objects numbers. */
+#define EMS_OBJ_BUFF_SIZE_PER_SEG 300
+
+/* For EMS 5.1, the buffer for raw data of objects is separated to another memory pool. */
+/* The pool size is (MMI_SMS_MAX_MSG_SEG * 140 * EMS_RATIO_OF_OBJ_PDU_BUFF). */
+/* 140 is the max size of a SMS */
+
+/* The more of EMS_RATIO_OF_OBJ_PDU_BUFF value will support */
+/* the larger objects which is compressed in higher compression ratio. */
+
+/* The ratio can be a float value, for example, 1.5, 2.5 */
+
+#ifdef __EMS_REL5__
+#define EMS_RATIO_OF_OBJ_PDU_BUFF 2
+#endif
+
+
+/* TOTAL memory cost in EMS library : */
+/* If __EMS_REL5__ is NOT turned ON : */
+/* memory costs = 2 * CM_SMS_MAX_MSG_NUM * (EMS_OBJ_BUFF_SIZE_PER_SEG + 310) bytes */
+
+/* If __EMS_REL5__ is turned ON : */
+/* memory costs = 2 * CM_SMS_MAX_MSG_NUM * (EMS_OBJ_BUFF_SIZE_PER_SEG + 310 + */
+/* 140 *EMS_RATIO_OF_OBJ_PDU_BUFF) bytes */
+
+/* ps: 310 bytes per segment are for text string buffer */
+
+
+/* display when concatenated segment missed */
+/* for example: a 3-segment concatenated message, but 2nd segment misses. */
+/* MMI would show : "content of seg1(.....)content of seg3 " */
+/* Note :DO NOT use the UCS2 coding string . */
+#define EMS_MISS_SEG_DELIMIT_STR "(.....)"
+
+//#include "customer_email_num.h"
+
+#ifndef __OPTR_NONE__
+ #include "op_custom_ps_inc.h"
+#endif
+
+/* =========================================================================== */
+
+#endif /* _CUSTOMER_PS_INC_H */
+