[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/driver/peripheral/inc/rtc_trc.h b/mcu/driver/peripheral/inc/rtc_trc.h
new file mode 100644
index 0000000..e8a39d8
--- /dev/null
+++ b/mcu/driver/peripheral/inc/rtc_trc.h
@@ -0,0 +1,141 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2005
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*******************************************************************************
+ * Filename:
+ * ---------
+ * rtc_trc.h
+ *
+ * Project:
+ * --------
+ * MAUI
+ *
+ * Description:
+ * ------------
+ * This is trace map definition for RTC driver
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ ****************************************************************************/
+#ifndef _RTC_TRC_H
+#define _RTC_TRC_H
+
+
+#ifndef GEN_FOR_PC
+
+ #ifndef _STACK_CONFIG_H
+ #error "stack_config.h should be included before tst_config.h"
+ #endif
+
+#else
+ #include "kal_trace.h"
+#endif /* GEN_FOR_PC */
+
+
+#ifndef _KAL_TRACE_H
+ #error "kal_trace.h should be included before tst_trace.h"
+#endif
+
+#if !defined(GEN_FOR_PC)
+#if defined(__TST_MODULE__) || defined(__CUSTOM_RELEASE__)
+ #include "rtc_trc_gen.h"
+#endif /* TST Trace Defintion */
+#endif
+BEGIN_TRACE_MAP(MOD_RTC_HISR)
+
+ TRC_MSG(RTC_REPEAT_CALI_ADJUST_COUNT,"RTC adjust %d count for repeat calibration register")
+ TRC_MSG(RTC_REPEAT_CALI_VALUE,"RTC repeat calibration register value: %x")
+ TRC_MSG(RTC_REPEAT_CALI_VALUE_EXCEED_MAX,"RTC repeat calibration value %d exceed max")
+ TRC_MSG(RTC_REPEAT_CALI_VALUE_EXCEED_MIN,"RTC repeat calibration value %d exceed min")
+ TRC_MSG(RTC_REPEAT_CALI_PERFORM_CALI,"RTC repeat calibration perform for %d counts")
+
+ TRC_MSG(RTC_ONESHOT_CALI_PERFORM_COUNT,"RTC one shot calibration for %d counts, remains %d counts")
+ TRC_MSG(RTC_ONESHOT_CALI_VALUE,"RTC oneshot calibration register value: %x")
+ TRC_MSG(RTC_ONESHOT_CALI_FINISH,"RTC oneshot calibration finish")
+
+ TRC_MSG(RTC_HW_CALI_START_MEASURE_INACCURATE,"RTC HW cali, start to measure rtc inaccurate: (%d:%d:%d)")
+ TRC_MSG(RTC_HW_CALI_INIT_MEASURE_ACCURATE_L1_TICK,"RTC HW cali, init L1 tick: %d")
+ TRC_MSG(RTC_HW_CALI_FINISH_MEASURE_INACCURATE,"RTC HW cali, finish measuring rtc inaccurate: (%d:%d:%d)")
+ TRC_MSG(RTC_HW_CALI_FINISH_MEASURE_ACCURATE_L1_TICK,"RTC HW cali, finish L1 tick: %d, inaccurate ticks: %d")
+ TRC_MSG(RTC_HW_CALI_NO_NEED_TO_CALI,"RTC HW cali, no need to perform calibration, no diff count: %d")
+ TRC_MSG(RTC_HW_CALI_IN_PROGRESS,"RTC HW cali, in progress: (%d:%d:%d)")
+ TRC_MSG(RTC_HW_CALI_INIT_REPEAT_CALI_COUNT,"RTC HW cali, init repeat cali count: %d")
+
+ TRC_MSG(RTC_SW_CALI_START_POWEROFF_CALI,"RTC SW cali, start to do power off cali")
+ TRC_MSG(RTC_SW_CALI_START_POWEROFF_CALI_TIME,"RTC SW cali, current time before power off cali: (%d:%d:%d)")
+ TRC_MSG(RTC_SW_CALI_FINISH_POWEROFF_CALI_TIME,"RTC SW cali, current time after power off cali: (%d:%d:%d)")
+ TRC_MSG(RTC_SW_CALI_FINISH_2ND_POWEROFF_CALI,"RTC SW cali, wait %d ticks to perform 2nd power off cali")
+ TRC_MSG(RTC_SW_CALI_AFTER_2ND_POWEROFF_CALI,"RTC SW cali, current time after 2nd power off cali: (%d:%d:%d)")
+ TRC_MSG(RTC_SW_CALI_START_POWERON_CALI_TIME,"RTC SW cali, start power on cali: (%d:%d:%d), init tick: %d")
+ TRC_MSG(RTC_SW_CALI_POWERON_CALI_START_INACCURACY_MEASURE,"RTC SW cali, start accuracy measure")
+ TRC_MSG(RTC_SW_CALI_POWERON_CALI_FINISH_INACCURACY_MEASURE,"RTC SW cali, accuracy for one hour: %d ticks")
+ TRC_MSG(RTC_SW_CALI_POWERON_CALI_START,"RTC SW cali, start power on cali: (%d:%d:%d), init tick: %d")
+ TRC_MSG(RTC_SW_CALI_WRITE_NVRAM,"RTC SW cali, write to NVRAM")
+ TRC_MSG(RTC_SW_CALI_KAL_EXPIRE_EARLY,"RTC SW cali, KAL_timer expired early, expected: %d (tick), now: %d")
+ TRC_MSG(RTC_SW_CALI_TIMOUE_NOT_IN_SEC_BOUNDARY,"RTC SW cali, timeout not in second boundary: %d (tick)")
+ TRC_MSG(RTC_SW_CALI_TIMOUE_OUT,"RTC SW cali timeout (%d:%d:%d), current frame tick: %d")
+ TRC_MSG(RTC_SW_CALI_UPDATE_TIME,"RTC SW cali, update time (%d:%d:%d), current frame tick: %d")
+ TRC_MSG(RTC_SW_CALI_POWEROFF_CALI_INIT1,"RTC SW cali, NVRAM time valid: %d")
+ TRC_MSG(RTC_SW_CALI_POWEROFF_CALI_INIT2,"RTC SW cali, NVRAM time: %d-%d-%d (%d:%d:%d)")
+ TRC_MSG(RTC_SW_CALI_POWEROFF_CALI_INIT3,"RTC SW cali, NVRAM tick diff valud: %d")
+ TRC_MSG(RTC_SW_CALI_POWEROFF_CALI_INIT4,"RTC SW cali, NVRAM ticks_diff_per_hour: %d")
+ TRC_MSG(RTC_SW_CALI_CURR_POWER_TIME,"RTC SW cali, curr power on time: %d-%d-%d (%d:%d:%d)")
+ TRC_MSG(RTC_SW_CALI_RTC_TIME_IN_MINUTE_BOUNDARY,"RTC SW cali, rtc time in minute boundary: %d, delay 6 sec")
+ TRC_MSG(RTC_SW_CALI_RTC_TIME_IN_ALARM_BOUNDARY,"RTC SW cali, rtc time in alarm boundary: %d, delay 6 sec")
+ TRC_MSG(RTC_SW_CALI_INACCURATE_TICK_DURING_POWEROFF,"RTC cali, inaccurate ticks during power off: %d")
+ TRC_MSG(RTC_SW_CALI_ALARM_POWERON_AND_NEED_BACKWARD_TIME,"RTC cali, alarm power on, but we need to backward time")
+ TRC_MSG(RTC_SW_CALI_ALARM_POWERON_AND_POWEROFF,"RTC cali, alarm power on but we backward time so power off")
+
+
+
+ TRC_MSG(RTC_TC_INTR_FOR_USER,"RTC TC intr for user")
+ TRC_MSG(RTC_AL_INTR,"RTC AL intr")
+
+ TRC_MSG(RTC_FORWARD_TIME_1,"RTC forward time: (%d:%d:%d) forward %d hour, %d min, %d sec")
+ TRC_MSG(RTC_FORWARD_TIME_2,"RTC forward time done: (%d:%d:%d)")
+ TRC_MSG(RTC_BACKWARD_TIME_1,"RTC backward time: (%d:%d:%d) backward %d hour, %d min, %d sec")
+ TRC_MSG(RTC_BACKWARD_TIME_2,"RTC backward time done: (%d:%d:%d)")
+
+
+
+
+
+END_TRACE_MAP(MOD_RTC_HISR)
+
+#endif /* _RTC_TRC_H */
+
+