[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/interface/driver/hif/hifsdio_qmu_except.h b/mcu/interface/driver/hif/hifsdio_qmu_except.h
new file mode 100644
index 0000000..19ba0b2
--- /dev/null
+++ b/mcu/interface/driver/hif/hifsdio_qmu_except.h
@@ -0,0 +1,136 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2012
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*******************************************************************************
+ * Filename:
+ * ---------
+ * hifsdio_qmu_except.h
+ *
+ * Project:
+ * --------
+ * MOLY
+ *
+ * Description:
+ * ------------
+ * This is interface of the HIF data path exception handler driver for SDIO
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ * ==========================================================================
+ * $Log$
+ *
+ * 04 03 2013 vend_mick.lin
+ * [MOLY00011933] Develop SDIO driver
+ * MT6290 exception handle of SDIO driver
+ *
+ *
+ ****************************************************************************/
+#ifndef __HIFSDIO_QMU_EXCEPT_H__
+#define __HIFSDIO_QMU_EXCEPT_H__
+
+#include "hif_common.h"
+
+
+/*!
+ * @brief initial the exception HIF driver, only support empty enqueue flow in exception
+ * @param nonstopq set n'th bit as 1 if n'th queue not stop while init, [0:15] for DL [16:31] for UP
+ * @param exceptq set queues would be used in exception mode, [0:15] for DL [16:31] for UP
+ * @return excute pass or fail
+ */
+kal_bool hifsdioq_except_initial(kal_uint32 nonstopq, kal_uint32 exceptq);
+
+/*!
+ * @brief clear the queue and flush SDIO SW fifo for following using
+ * HIF layer don't care remain GPD and upper layer could parsing their resource
+ * to handle remain data re-send flow (DHL would re-send remain data after using this API)
+ *
+ */
+void hifsdioq_except_clear_q(void);
+
+
+/*!
+ * @brief ask hif driver to set GPD buffer into QMU
+ * don't handle critical section protection becuase in the single thread exception handler
+ * @param q_type the queue type
+ * @param queue_no QMU queue no
+ * @param first_gpd first GPD of a single GPD or GPD list
+ * @param last_gpd last GPD of a single GPD or GPD list
+ * @return KAL_TRUE : set gpd success,
+ * KAL_FALSE : set gpd fail and upper module should re-submit or free the queue list
+ */
+kal_bool hifsdioq_except_set_gpd(hif_queue_type_e q_type, kal_uint8 queue_no, qbm_gpd* first_gpd, qbm_gpd* last_gpd);
+/*!
+ * @brief poll specified QMU queue to see if any GPD complete
+ * deq_type == HIFQ_FREEQ, (use qbmt_free_q_hwo())
+ * would free the used queue after this function and return the deq number
+ * deq_type == HIF_DEQ,
+ * would just deq and return the deq list and the deq number
+ * use use qbmt_de_q() if generic buffer type
+ *
+ * @param deq_info the que number , que type and deq type
+ * @param first_gpd first GPD of a single GPD or GPD list
+ * @param last_gpd last GPD of a single GPD or GPD list
+ * @return return the deq number
+ */
+
+kal_uint32 hifsdioq_except_poll_queue(hif_deq_info_t deq_info, void **pp_first_gpd, void **pp_last_gpd);
+
+/*!
+ * @brief hif driver would count the timeout for TX queue not progressing
+ * upper driver should check this the status when they found channel abnormal
+ * @param q_num, the tx queue number to check status
+ * @return Return the hif driver counter of txq stall time in millisecond (ms)
+*/
+kal_uint32 hifsdioq_except_get_txq_timeout(kal_uint8 q_num);
+
+
+/*!
+ * @brief SDIO upper layer would call this function to drive HIF to do something
+ *
+*/
+void hifsdioq_except_poll_isr(void);
+
+/*!
+ * @brief get currently que list for debug
+ * @param is_tx, KAL_TRUE for txq , KAL_FALSE for rxq
+ * @param q_no , the queue number form 0~n
+ * @param pp_head , return the currently queue head
+ * @param pp_tail , return the currently queue tail
+ */
+void hifsdioq_except_get_que_list(kal_bool is_tx , kal_uint8 q_no, void **pp_head, void **pp_tail);
+
+#endif