[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/interface/protocol/l4_c2k/valattune.h b/mcu/interface/protocol/l4_c2k/valattune.h
new file mode 100644
index 0000000..f95f252
--- /dev/null
+++ b/mcu/interface/protocol/l4_c2k/valattune.h
@@ -0,0 +1,557 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2016
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS (""MEDIATEK SOFTWARE"")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN ""AS-IS"" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+/*************************************************************************
+ *
+ * File Name: valattune.h
+ *
+ * Description: Tuning parameters
+ *
+ *
+ ************************************************************************/
+#ifndef _AT_TUNE_H
+#define _AT_TUNE_H 1
+
+#include "valatdata.h"
+/* ---------------------------------------------------------------------
+ * Name: Data Port Present
+ *
+ * Description:
+ * This switch defines whether or not AppInt supports a Data Port
+ * interface. Set this switch to KAL_FALSE for Browser-Only applications.
+ *
+ * Restrictions:
+ * KAL_FALSE, KAL_TRUE
+ *
+ * Default Value:
+ * KAL_TRUE
+ *
+ * Notes:
+ * When this switch is set to KAL_FALSE, the following files can be excluded
+ * from the build-set:
+ * - ai_ch.c
+ * - ai_cmd.c
+ * - ai_dh.c
+ * - ai_dr.c
+ * - ai_parse.c
+ * - atparse.c
+ * - atpparse.c
+ * - iqmgr.c
+ * - isolib.c
+ */
+#define AT_DPD_PRESENT 1
+
+/* ---------------------------------------------------------------------
+ * Name: V.42bis Compression Capabilities: <direction>
+ *
+ * Description:
+ * This switch defines the capabilities of the V.42bis software
+ * provisioned in the MT. AppInt uses this switch to determine the
+ * valid range for the <direction> parameter in the +CDS command.
+ *
+ * Restrictions:
+ * 0: No V.42bis provisioned.
+ * 1: V.42bis available in the reverse direction only.
+ * 2: V.42bis available in the forward direction only.
+ * 3: V.42bis available in both directions.
+ *
+ * Default Value:
+ * 0
+ */
+#define AT_CMP_DIRECTION 0
+
+/* ---------------------------------------------------------------------
+ * Name: V.42bis Compression Capabilities: <max_dict>
+ *
+ * Description:
+ * This switch defines the maximum dictionary size supported the V.42bis
+ * software provisioned in the MT. AppInt uses this switch to determine
+ * the valid range for the <max_dict> parameter in the +CDS command.
+ *
+ * Restrictions:
+ * 512 - 65535
+ *
+ * Default Value:
+ * 2048
+ */
+#define AT_CMP_MAX_DICT 2048
+
+
+/* ---------------------------------------------------------------------
+ * Name: V.42bis Compression Capabilities: <max_string>
+ *
+ * Description:
+ * This switch defines the maximum string size supported the V.42bis
+ * software provisioned in the MT. AppInt uses this switch to determine
+ * the valid range for the <max_string> parameter in the +CDS command.
+ *
+ * Restrictions:
+ * 6 - 250
+ *
+ * Default Value:
+ * 6
+ */
+#define AT_CMP_MAX_STRING 6
+
+
+/* ---------------------------------------------------------------------
+ * Name: Data Port Driver Capabilities: autobaud rates
+ *
+ * Description:
+ * This switch defines the bit rates which may be auto-detected by the
+ * Data Port Driver hardware. These rates are to be used in Command
+ * state and for Async Data calls only. AppInt uses this switch to
+ * determine the valid range for the <auto-detectable rates> parameter
+ * in the +IPR command.
+ *
+ * Restrictions:
+ * Any number of entries from the following list:
+ * BR_300
+ * BR_1200
+ * BR_2400
+ * BR_4800
+ * BR_9600
+ * BR_19200
+ * BR_38400
+ * BR_57600
+ * BR_115200
+ * or: BR_NONE.
+ *
+ * The same bit rate may not be specified in both AT_DPD_AUTOBAUD_RATES and
+ * AT_DPD_FIXED_RATES.
+ *
+ * Default Value:
+ * (BR_300 + BR_1200 + BR_2400 + BR_4800 + BR_9600 +
+ * BR_19200 + BR_38400 + BR_57600 + BR_115200)
+ */
+/*
+#define AT_DPD_AUTOBAUD_RATES (BR_300 + \
+ BR_1200 + \
+ BR_2400 + \
+ BR_4800 + \
+ BR_9600 + \
+ BR_19200 + \
+ BR_38400 + \
+ BR_57600 + \
+ BR_115200)
+
+*/
+
+#define AT_DPD_AUTOBAUD_RATES BR_NONE
+/* ---------------------------------------------------------------------
+ * Name: Data Port Driver Capabilities: fixed baud rates
+ *
+ * Description:
+ * This switch defines the bit rates supported by the Data Port Driver
+ * hardware, but which may not be auto-detected.
+ * These rates are to be used in Command state and for Async Data calls only.
+ * AppInt uses this switch to determine the valid range for the
+ * <fixed-only rates> parameter in the +IPR command.
+ *
+ * Restrictions:
+ * Any number of entries from the following list:
+ * BR_300
+ * BR_1200
+ * BR_2400
+ * BR_4800
+ * BR_9600
+ * BR_19200
+ * BR_38400
+ * BR_57600
+ * BR_115200
+ * or: BR_NONE
+ *
+ * The same bit rate may not be specified in both AT_DPD_AUTOBAUD_RATES and
+ * AT_DPD_FIXED_RATES.
+ *
+ * Default Value:
+ * BR_NONE
+ */
+#define AT_DPD_FIXED_RATES (BR_19200 + \
+ BR_115200+ \
+ BR_230400 )
+
+
+/* ---------------------------------------------------------------------
+ * Name: Local AT-Parameter Default Value: +IPR
+ *
+ * Description:
+ * This switch defines the default value to be used for the "Fixed
+ * DTE Rate" parameter.
+ * This value is used to reset the parameter value when a ATZ or AT&F
+ * command is processed and AT_DPD_AUTOBAUD_RATES is BR_NONE. Otherwise,
+ * a value of zero is used.
+ *
+ * Restrictions:
+ * Any value from the list defined for AT_DPD_FIXED_RATES.
+ *
+ * Default Value:
+ * BR_230400
+ */
+#define AT_DEFAULT_IPR BR_230400
+
+
+/* ---------------------------------------------------------------------
+ * Name: Data Port Driver Capabilities: Maximum FAX bit rate
+ *
+ * Description:
+ * This switch defines the maximum bit rate which the Data Port Driver
+ * can use during FAX calls. AppInt uses this switch to determine the
+ * valid range of values for the +FPR command.
+ *
+ * Restrictions:
+ * Any one of the following values:
+ * FR_2400
+ * FR_4800
+ * FR_9600
+ * FR_19200
+ * FR_38400
+ * FR_57600
+ * FR_115200
+ *
+ * Default Value:
+ * FR_19200
+ */
+#define AT_DPD_MAX_FPR FR_19200
+
+
+/* ---------------------------------------------------------------------
+ * Name: Data Port Driver Capabilities: Fax transmit buffer size.
+ *
+ * Description:
+ * This switch defines the size of the buffer used by the Data Port Driver
+ * to store data in the reverse direction during FAX calls. AppInt uses
+ * this switch when reporting information for the <tbs> parameter in the
+ * +FBS? command.
+ *
+ * Restrictions:
+ * 0 - 65535
+ *
+ * Default Value:
+ * 3600
+ */
+#define AT_DPD_FBS_TX 3600
+
+/* ---------------------------------------------------------------------
+ * Name: Data Port Driver capabilities: Fax receive buffer size.
+ *
+ * Description:
+ * This switch defines the size of the buffer used by the Data Port Driver
+ * to store data received in the forward direction during FAX calls.
+ * AppInt uses this switch when reporting information for the <rbs>
+ * parameter in the +FBS? command.
+ *
+ * Restrictions:
+ * 3600 - 65535
+ *
+ * Default Value:
+ * 3600
+ */
+#define AT_DPD_FBS_RX 3600
+
+/* ---------------------------------------------------------------------
+ * Name: Local AT-Parameter Default Value: +CDS.<max_dict>
+ *
+ * Description:
+ * This switch defines the default value to be used for the V.42bis
+ * data compression: <max_dict> parameter to be used on the Um interface.
+ * This value is used to reset the parameter value when a ATZ or AT&F
+ * command is processed.
+ *
+ * Restrictions:
+ * 512 - AT_CMP_MAX_DICT
+ *
+ * Default Value:
+ * AT_CMP_MAX_DICT
+ */
+#define AT_DEFAULT_CDS_MAX_DICT AT_CMP_MAX_DICT
+
+
+/* ---------------------------------------------------------------------
+ * Name: Local AT-Parameter Default Value: +CPS
+ *
+ * Description:
+ * This switch defines the default value to be used for the
+ * Packet Data Service Option parameter.
+ * This value is used to reset the parameter value when a ATZ or AT&F
+ * command is processed.
+ *
+ * Restrictions:
+ * 7, 8, 15, 16, 22, 23, 24, 25, 26, 27, 28, 29,
+ * 4103, 4104
+ *
+ * Default Value:
+ * 4103
+ */
+#define AT_DEFAULT_CPS 59
+
+/* ---------------------------------------------------------------------
+ * Name: Local AT-Parameter Default Value: +CMUX
+ *
+ * Description:
+ * This switch defines the default value to be used for the "Select
+ * Multiplex Option" parameter.
+ * This value is used to reset the parameter value when a ATZ or AT&F
+ * command is processed.
+ *
+ * Restrictions:
+ * 1 - 2
+ *
+ * Default Value:
+ * 2
+ */
+#define AT_DEFAULT_CMUX 2
+
+/* ---------------------------------------------------------------------
+ * Name: Local AT-Parameter Default Value: +FPR
+ *
+ * Description:
+ * This switch defines the default value to be used for the "Serial
+ * Port Rate Control" parameter.
+ * This value is used to reset the parameter value when a ATZ or AT&F
+ * command is processed and +FCLASS = 2.0.
+ *
+ * Restrictions:
+ * Any value from the following list up to the value specified by
+ * AT_DPD_MAX_FPR:
+ * FR_AUTOBAUD,
+ * FR_19200
+ *
+ * Default Value:
+ * FR_AUTOBAUD
+ */
+#define AT_DEFAULT_FPR FR_19200
+
+/* ---------------------------------------------------------------------
+ * Name: NSPE Capabilities: Maximum TX Request Size
+ *
+ * Description:
+ * This switch defines the maximum size (in bytes) which AppInt may
+ * specify in a nspeAiTxReq call. AppInt requires this parameter to
+ * be at least 98 bytes so that the longest EIA-617 in-band command
+ * may be transmitted in a single TxReq. The upper bound for this
+ * parameter is determined by the MBUF size and high water mark settings
+ * configured for NSPE.
+ *
+ * Restrictions:
+ * 98 - 65535
+ *
+ * Default Value:
+ * 1024
+ */
+#define AT_NSPE_MAX_TXREQ_LEN 1024
+
+
+/* ---------------------------------------------------------------------
+ * Name: Data Transfer Behavior
+ *
+ * Description:
+ * This switch defines the maximum amount of time (in msec) AppInt will
+ * allow reverse channel User Data to sit in the V.42bis compressor or
+ * the TCP layer of NSPE. When this timer expires, AppInt will flush the
+ * compressor (if compression is active and if there could be partially
+ * matched User Data strings in the compressor) and push data out of the
+ * TCP layer.
+ *
+ * Restrictions:
+ * 1 - 65535
+ *
+ * Default Value:
+ * 100
+ */
+#define AT_STALE_DATA_TMO 100
+
+
+/* ---------------------------------------------------------------------
+ * Name: AppInt Capabilities: Maximum AT-command line length
+ *
+ * Description:
+ * This switch defines the maximum size of an AT-command line in
+ * COMMAND state as well as the largest single AT-command which may be
+ * reflected by the IWF in ONLINE state.
+ *
+ * For COMMAND state, this size includes the initial "AT" and trailing
+ * <s3><s4> characters.
+ *
+ * The longest single AT-command in the IS-707 repertoire (AT+FNS=) requires
+ * 280 characters. The second longest command (AT+CFG=) requires 258
+ * characters. AppInt allows the data from repetitive AT+FNS= and AT+CFG=
+ * commands to be appended to the existing parameter data. Therefore, with
+ * a cooperating TE2, this tuning parameter may be safely reduced to the
+ * maximum length of the third longest single AT-command: AT+MA=
+ * (48 characters).
+ *
+ * Restrictions:
+ * 48 - 65535
+ *
+ * Default Value:
+ * 280
+ */
+#ifdef SYS_OPTION_ENHANCEDAT
+#define AT_MAX_AT_CMD_LEN ATC_ENHANCED_AT_CMD_LEN
+#else
+#define AT_MAX_AT_CMD_LEN 280
+#endif
+
+
+/* ---------------------------------------------------------------------
+ * Name: Compression Negotiation Timeout
+ *
+ * Description:
+ * This switch defines the amount of time (in msec) AppInt will wait for
+ * the Um data compression negotiation procedure to complete.
+ * This timer is activated only if the +CDS.<compressionNegotiation>
+ * parameter is enabled.
+ * If the timer expires and the data compression specified by the other
+ * +CDS parameters has not been obtained, AppInt will disconnect the call.
+ *
+ * Restrictions:
+ * 1 - 65535
+ *
+ * Default Value:
+ * 5000
+ */
+#define AT_CN_TMO 5000
+
+/* ---------------------------------------------------------------------
+ * Name: Allow Invalid Body Characters
+ *
+ * Description:
+ * Setting this switch to KAL_TRUE disables EIA-617 extended command body
+ * character validation. This overcomes a bug in some IWF implementations.
+ *
+ * Restrictions:
+ * KAL_FALSE, KAL_TRUE
+ *
+ * Default Value:
+ * KAL_TRUE
+ */
+#define AT_ALLOW_INVALID_BODY_CHARS KAL_TRUE
+
+/* ---------------------------------------------------------------------
+ * Name: Allow Invalid Body Characters
+ *
+ * Description:
+ * This switch determines whether or not AppInt will upload an ATM1
+ * (speaker-on-until-connect) command to the IWF.
+ * This switch should only be set to KAL_TRUE if the MT software supports
+ * the multiply connected service option configuration and service
+ * option switching functions described in IS-707-A.4, section 4.1(b)
+ *
+ * Restrictions:
+ * KAL_FALSE, KAL_TRUE
+ *
+ * Default Value:
+ * KAL_FALSE
+ */
+#define AT_UPLOAD_ATM KAL_FALSE
+
+/* ---------------------------------------------------------------------
+ * Name: Packet Data Service Options
+ *
+ * Description:
+ * These switches define the values which AppInt will accept for
+ * the +CPS AT-command.
+ *
+ * Restrictions:
+ * KAL_FALSE, KAL_TRUE
+ *
+ * Default Value:
+ * AT_CPS_SO_07: KAL_TRUE
+ * AT_CPS_SO_08: KAL_TRUE
+ * AT_CPS_SO_15: KAL_TRUE
+ * AT_CPS_SO_16: KAL_TRUE
+ *
+ * AT_CPS_SO_22: KAL_FALSE
+ * AT_CPS_SO_23: KAL_FALSE
+ * AT_CPS_SO_24: KAL_FALSE
+ * AT_CPS_SO_25: KAL_FALSE
+ * AT_CPS_SO_26: KAL_FALSE
+ * AT_CPS_SO_27: KAL_FALSE
+ * AT_CPS_SO_28: KAL_FALSE
+ * AT_CPS_SO_29: KAL_FALSE
+ *
+ * AT_CPS_SO_4103: KAL_TRUE
+ * AT_CPS_SO_4104: KAL_TRUE
+ */
+#define AT_CPS_SO_07 KAL_TRUE
+#define AT_CPS_SO_08 KAL_TRUE
+#define AT_CPS_SO_15 KAL_TRUE
+#define AT_CPS_SO_16 KAL_TRUE
+
+#define AT_CPS_SO_22 KAL_TRUE
+#define AT_CPS_SO_23 KAL_TRUE
+#define AT_CPS_SO_24 KAL_TRUE
+#define AT_CPS_SO_25 KAL_TRUE
+
+#define AT_CPS_SO_26 KAL_FALSE
+#define AT_CPS_SO_27 KAL_FALSE
+#define AT_CPS_SO_28 KAL_FALSE
+#define AT_CPS_SO_29 KAL_FALSE
+
+#define AT_CPS_SO_33 KAL_TRUE
+#define AT_CPS_SO_59 KAL_TRUE
+#define AT_CPS_SO_69 KAL_TRUE
+
+#define AT_CPS_SO_4103 KAL_TRUE
+#define AT_CPS_SO_4104 KAL_TRUE
+
+
+/* ---------------------------------------------------------------------
+ * Name: Maximum Browser Digits
+ *
+ * Description:
+ * This switch defines the maximum string length which can be returned by
+ * the cfgAiGetBrowserDigits function, excluding the NULL terminator.
+ *
+ * Restrictions:
+ * 1 - 255
+ *
+ * Default Value:
+ * 20
+ */
+#define AT_MAX_BROWSER_DIGITS 20
+
+#ifdef MTK_CBP
+/* ---------------------------------------------------------------------
+ * Name: SYS ACTIVED BAND
+ *
+ * Default Value:
+ * VAL_SYS_BAND_CLASS_INVALID_MASK 0XFFFF FFFF
+ */
+
+#define AT_DEFAULT_SYS_ACTIVED_BAND_CLASS_MASK 0XFFFFFFFF
+#endif
+
+#endif /* _AI_TUNE_H */