[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/interface/service/dhl/v2/dsp_logging.h b/mcu/interface/service/dhl/v2/dsp_logging.h
new file mode 100644
index 0000000..c3caf85
--- /dev/null
+++ b/mcu/interface/service/dhl/v2/dsp_logging.h
@@ -0,0 +1,235 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2012
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/****************************************************************************
+ * Filename:
+ * ---------
+ * @file dsp_logging.h
+ *
+ * Description:
+ * ------------
+ * @brief Interface of DSP logging handler.
+ *
+ * ==========================================================================
+ * $Log$
+ *
+ * 09 18 2020 guan-ren.chen
+ * [MOLY00327199] [Gen97/Gen98] Development
+ * DSP check register flag before filter update(SWRD).
+ *
+ * 09 14 2020 guan-ren.chen
+ * [MOLY00327199] [Gen97/Gen98] Development
+ * DSP check LS flag before update filter(SWRD).
+ *
+ * 04 09 2020 yen-hsuan.lin
+ * [MOLY00508510] [OK项目]PLS模式抓log需要和dump机制解耦
+ * decouple the logging and memory dump(SWRD)
+ *
+ * 03 31 2020 yen-hsuan.lin
+ * [MOLY00508510] [OK项目]PLS模式抓log需要和dump机制解耦
+ * 03 16 2020 kaijiun.yeo
+ * [MOLY00504503] Customer can adjust buffer allocation by customer filter
+ *
+ * 03 31 2020 kaijiun.yeo
+ * [MOLY00507931] Overwritable memorydump setting from AP (memory dump 2.0 phase 2)
+ * Add function prototype in dsp_logging.h
+ * decople log and memory dump(SW)
+ *
+ * 03 31 2020 kaijiun.yeo
+ * [MOLY00507931] Overwritable memorydump setting from AP (memory dump 2.0 phase 2)
+ * Add function prototype in dsp_logging.h
+ * [Customer can adjust buffer allocation by customer filter]
+ * Logging Buffer Reallocation - add function prototype in dsp_logging.h
+ *
+ * 01 17 2020 guan-ren.chen
+ * [MOLY00474969] [Logging] Round-Robin Exception Re-dump Log
+ * [Redump 2.0][SWRD] Round-Robin dump ULSP .
+ *
+ * 12 09 2019 yen-hsuan.lin
+ * [MOLY00327199] [Gen97] Development
+ * [MOLY00464641] Fix the dhl low power problem
+ *
+ * merger the Gen98 Fix into VMOLY trunk
+ *
+ * 11 21 2019 guan-ren.chen
+ * [MOLY00460317] [Petrus][blocking] trace lost before assert in two log - ALPS04883010, ALPS04883323
+ * Change trace name and fix wrong function prototype.
+ *
+ * 09 23 2019 yen-hsuan.lin
+ * [MOLY00327199] [Gen97] Development
+ * Fix the set dsp filter flow for rake
+ *
+ * 09 21 2019 guan-ren.chen
+ * [MOLY00327199] [Gen97] Development
+ * 1. ULSP DSP refactory SWRD.
+ * 2. Remove SW pull power when PB is not empty
+ * 3. Move DSP ST log definition file from HWRD to MPD
+ *
+ * 09 18 2019 guan-ren.chen
+ * [MOLY00327199] [Gen97] Development
+ * 1. ULSP DSP refactory SWRD.
+ * 2. Remove SW pull power when PB is not empty
+ * 3. Move DSP ST log definition file from HWRD to MPD
+ *
+ * 09 06 2019 yen-hsuan.lin
+ * [MOLY00437389] Porting Built in filter
+ *
+ * Add built in function
+ *
+ * 09 03 2019 guan-ren.chen
+ * [MOLY00327199] [Gen97] Development
+ * Fix pull DSP power when DSP first enter dormant.
+ *
+ * 08 19 2019 guan-ren.chen
+ * [MOLY00327199] [Gen97] Development
+ * ULSP DSP UT.
+ *
+ * 08 08 2019 guan-ren.chen
+ * [MOLY00427332] [MT6297][Apollo][Overnight][LegacyRAT][CHT][TPE][VMOLY][20190730]assert fail:dhl_ulsp.c
+ * LS abort fail SW workaround for SCQ16 (WHQA_00039659).
+ *
+ * 07 11 2019 guan-ren.chen
+ * [MOLY00327199] [Gen97] Development
+ * Fix DSP filter wrong size.
+ *
+ * 05 30 2019 mojo.lai
+ * [MOLY00401562] Decouple ICD from DHL on VMOLY trunk
+ *
+ * Save DSP filter to NVRAM
+ *
+ * 04 25 2019 yancy.chien
+ * [MOLY00401562] Decouple ICD from DHL on VMOLY trunk
+ *
+ * 1. Dynamic CCB.
+ * 2. Src Plug-in phase-in.
+ * 3. Fix build error on Gen95
+ *
+ * 04 16 2019 guan-ren.chen
+ * [MOLY00399588] [Gen97] Dormant flow
+ * Dormant flow. Struct access ULSP reg.
+ *
+ * 03 13 2019 guan-ren.chen
+ * [MOLY00391128] [Gen97] Develop for logging service
+ * Change print PS ex log location.
+ * Combine ULSP print ex log and print redump log function.
+ *
+ * 01 03 2019 mojo.lai
+ * [MOLY00376312] Save PB abort and flush status to CXIF
+ *
+ * .
+ *
+ * 10 31 2018 mojo.lai
+ * [MOLY00361962] Set DSP Filter
+ *
+ * .
+ *
+ ****************************************************************************/
+
+#ifndef _DSP_LOGGING_H
+#define _DSP_LOGGING_H
+
+#if defined(__MAUI_BASIC__)
+#define Dsp_Logging_Init()
+#else
+#if defined(__MTK_TARGET__)
+#include "dhl_def.h"
+#include "kal_public_defs.h"
+#include "kal_public_api.h"
+#include "kal_internal_def.h"
+#include "dhl_trace.h"
+
+#include "dsp_header_define_cuif_inner_brp.h"
+#include "dsp_header_define_cuif_fec_wbrp.h"
+#include "dsp_header_define_cuif_speech.h"
+#include "dsp_header_define_cmif.h"
+#include "dhl_nvram_def.h"
+#if (CUR_GEN >= MD_GEN97)
+#include "dsp_header_define_csif_memory.h"
+#endif
+
+#include "dhl_dsp_def.h"
+
+#if (CUR_GEN >= MD_GEN97)
+#define DSP_LTE_CORE_COUNT (SCQ16_3 + 1)
+#else
+#define DSP_LTE_CORE_COUNT (SCQ16_1 + 1)
+#endif
+
+extern dhl_cmd_set_dsp_filter_struct dsp_filter[NVRAM_EF_DHL_DSP_FILTER_V2_TOTAL + 1]; // 1-based
+
+/*---------------------------------------------------------------------------
+ Funtion prototype
+---------------------------------------------------------------------------*/
+void Dsp_Logging_Init();
+void Dsp_Logging_Init_By_Core(kal_uint8 core);
+void Dsp_set_filter_all_off();
+void Dsp_Load_Builtin_Filters(kal_int8 scenario_id);
+void Dsp_Set_Filter(dhl_cmd_set_dsp_filter_struct *dsp_filter_from_elt, kal_bool is_save_filter);
+void Dsp_Set_Filter_Imp();
+void Dsp_Set_RAKE_Filter();
+void Dsp_Backup_Clear_All_Filter();
+void Dsp_Restore_Filter();
+kal_bool Dsp_is_dsp_filter_all_off();
+
+void* Get_Cxif_Address(dsp_core_enum core);
+void Save_Filter_To_Cxif(kal_uint8 core);
+void Print_Filter_Setting(dhl_cmd_set_dsp_filter_struct *filter_setting);
+void Dsp_Test_Filter(kal_uint8 core);
+kal_uint8 Check_Dsp_Abort_Timeout();
+void PrintDSPDebugTrace();
+kal_bool Support_CXIF();
+kal_uint8 Check_4G_Dsp_Abort_Timeout();
+kal_uint8 Check_5G_Dsp_Abort_Timeout();
+char* get_core_name(dsp_core_enum core);
+kal_bool Get_Dsp_src_id(dsp_core_enum core_enum, kal_uint8* src_id);
+kal_bool Get_Dsp_Core_Enum(dhl_dsp_filter_type filter_type, kal_uint8 src_id, dsp_core_enum* core_enum);
+kal_bool Get_DSP_Core_NVRAM_Index(dsp_core_enum core_enum, kal_uint32* index);
+void dsp_ut_set_ut_case(kal_uint32 dsp_core_bit_mask, ulsp_ut_case ut_case, kal_uint32 para);
+void dsp_ut_wait_ut_case_finish(kal_uint32 dsp_core_bit_mask);
+void dsp_ut_notify_dsp(kal_uint32 dsp_core_bit_mask);
+void dhl_activate_dsp(kal_uint32 module_id, kal_bool first_activate);
+void dhl_deactivate_dsp(kal_uint32 module_id);
+void dsp_ut_init();
+void dsp_backup_filter_update_flag();
+void dsp_restore_filter_update_flag();
+void dsp_set_filter_update_flag(dsp_core_enum core);
+
+
+void dhl_ulsp_reset_vcore_l1(kal_uint32 ch_id);
+void dhl_ulsp_reset_scq16_pb_l1(kal_uint32 ch_id);
+
+#endif // __MTK_TARGET__
+#endif // __MAUI_BASIC__
+#endif // _DSP_LOGGING_H