[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/protocol/interface/general/ratcm_slce_struct.h b/mcu/protocol/interface/general/ratcm_slce_struct.h
new file mode 100644
index 0000000..a16aec5
--- /dev/null
+++ b/mcu/protocol/interface/general/ratcm_slce_struct.h
@@ -0,0 +1,215 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2007
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*******************************************************************************
+ * Filename:
+ * ---------
+ * ratcm_slce_struct.h
+ *
+ * Project:
+ * --------
+ * MONZA
+ *
+ * Description:
+ * ------------
+ *
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ * ==========================================================================
+ * $Log:$
+ *
+ * 06 11 2020 vend_mtb_aritha002
+ * [MOLY00519500] ???????19165??864039041106553????????????
+ *
+ * NR15.R3.MP
+ *
+ * 04 16 2015 elle.sun
+ * [MOLY00087788] [Universal Bin] FDD SLCE Check-in
+ * UBIN Phase2 - set RAT and mode switch.
+ *
+ * 09 28 2012 bao.han
+ * [MOLY00004236] [interface][service][kal]remove stack_ltlcom.h
+ * .
+ *
+ * 09 28 2012 austin.tsai
+ * [MOLY00004236] [interface][service][kal]remove stack_ltlcom.h
+ * .
+ *
+ * 11 09 2011 elle.sun
+ * removed!
+ * .
+ *
+ * 12 14 2010 cosine.jheng
+ * removed!
+ * Integration change.
+ *
+ * 10 20 2010 cosine.jheng
+ * removed!
+ * [RATCM][RHR]Check in ratcm file in uas\interface
+ *
+ * removed!
+ * removed!
+ *
+ *
+ * removed!
+ * removed!
+ * Add copyright header.
+ ****************************************************************************/
+
+#ifndef _RATCM_SLCE_STRUCT_H
+#define _RATCM_SLCE_STRUCT_H
+
+/* MAUI_02828210, redundant header removal */
+#include "ratcm_slce_enums.h"
+//#include "kal_general_types.h"
+//#include "app_ltlcom.h" Elle20111011 - MSBB private header in BSP cleaning
+#include "kal_public_api.h"//Austin: remove stack_ltlcom.h and replace to kal_public_api.h
+#include "l3_inc_enums.h"
+#include "uas_common_enums.h"
+#include "gmss_public.h"
+
+typedef kal_uint8 RAB_Identity;
+typedef kal_uint8 NAS_Synchronisation_Indicator;
+
+typedef struct
+{
+ LOCAL_PARA_HDR
+
+ kal_uint8 validity;
+
+ RAB_Identity rabId; /* Range from 5~15 */
+ channel_mode_enum rab_mode;
+ NAS_Synchronisation_Indicator nasSyncIndicator;
+
+} udc_rab_generic_ind_struct;
+
+/************************/
+/* UDC_RAB_ESTABLISHMENT */
+/************************/
+/* Description: These operations allow the transfer of control
+ messages for radio access bearer establishment between non-access
+ strata elements on each side of the access interface. The
+ operations allow the IF side to initialise a radio access
+ bearer. The operation also implies a request to the AS to allocate
+ transmission resources to the radio access bearer.
+
+ A radio access bearer identification uniquely identifies the radio
+ access bearer. It is used in all primitives that pertain to the
+ radio access bearer. It also serves as the binding to a NAS call.
+
+ The Iu bearer identification identifies the Iu connection. A
+ quality of service request specifies the bearer characteristics
+ that apply to the radio access bearer (ref: [23.110;6.2.2.3.4]).
+*/
+typedef udc_rab_generic_ind_struct ratcm_slce_rab_establishment_ind_struct ;
+
+/************************/
+/* UDC_RAB_MODIFY */
+/************************/
+/* Description: These operations allow the transfer of control
+ messages for radio access bearer modification between non-access
+ strata elements on each side of the access interface. The
+ operations allow the IF side to modify a radio access
+ bearer.
+ A radio access bearer identification uniquely identifies the radio
+ access bearer. It is used in all primitives that pertain to the
+ radio access bearer. It also serves as the binding to a NAS call.
+*/
+typedef udc_rab_generic_ind_struct ratcm_slce_rab_modify_ind_struct ;
+
+/******************/
+/* UDC_RAB_RELEASE */
+/******************/
+/* Description: These operations allow the transfer of radio access
+ bearer release messages between non-access strata elements on each
+ side of the access interface. The operations allow IF side to
+ release a radio access bearer (ref: [23.110;6.2.2.3.5]).
+
+ This primitive indicates the release of the radio access bearer to upper layers. */
+
+typedef struct
+{
+ LOCAL_PARA_HDR
+
+ RAB_Identity rabId; /* Range from 5~15 */
+ rab_release_cause_enum rel_cause;
+
+}ratcm_slce_rab_release_ind_struct ;
+
+
+typedef struct
+{
+ LOCAL_PARA_HDR
+
+ CRC_Append_Cmd cmd;
+}ratcm_slce_monitoring_close_loop_req_struct;
+
+typedef struct
+{
+ LOCAL_PARA_HDR
+
+}ratcm_slce_monitoring_close_loop_cnf_struct;
+
+
+/****************************************************************************
+ * RATCM_SLCE_MONITORING_CLOSE_LOOP_IND
+ *
+ * Sent by SLCE to RATCM to indicate that the loop test mode 2 has been stopped by lower lower layer.
+ *
+ ****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+
+} ratcm_slce_monitoring_close_loop_ind_struct ;
+
+typedef struct{
+ LOCAL_PARA_HDR
+ umts_duplex_mode_type source_umts_duplex_mode;
+ umts_duplex_mode_type target_umts_duplex_mode;
+ lte_duplex_mode_type source_lte_duplex_mode;
+ lte_duplex_mode_type target_lte_duplex_mode;
+ mode_switch_cause_enum cause;
+} ratcm_slce_duplex_mode_change_req_struct;
+
+typedef struct{
+ LOCAL_PARA_HDR
+ kal_bool result;
+} ratcm_slce_duplex_mode_change_cnf_struct;
+
+#endif /* _RATCM_SLCE_STRUCT_H */