[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/service/esl_debug/inc/mase_debug.h b/mcu/service/esl_debug/inc/mase_debug.h
new file mode 100644
index 0000000..b9e515e
--- /dev/null
+++ b/mcu/service/esl_debug/inc/mase_debug.h
@@ -0,0 +1,74 @@
+#ifndef __MASE_DEBUG_H__
+#define __MASE_DEBUG_H__
+
+#include "esl_debug.h"
+
+//Description of #defines used to control amount of logging in ESL (PXP/VPX) and MODIS-HW-COPRO simulation.
+//In MODIS-HW-COPRO (it's a MASE build of L234 protocol stack + ESL HW models + data generators):
+// We always log everything (as performance is not an issue on the PC), unless is __DISABLE_ESL_DBG_PRINT__ defined (then logging is off).
+// As this is pure PC build, __MTK_TARGET__ is NOT defined.
+//
+//In ESL (PXP/VPX environment):
+// __ESL_DBG_UTIL__ needs to be enabled to get any logging out.
+// If __DISABLE_ESL_DBG_PRINT__ is defined: only critical logging is performed (using esl_fixed_printf), all other logging is OFF. Use this mode for benchmarks.
+// If __DISABLE_ESL_DBG_PRINT__ is NOT defined: we get full logs (slow, but great when debugging).
+// ESL has __MTK_TARGET__ defined switched ON.
+#if defined(__ESL_DBG_UTIL__)
+#ifdef __DISABLE_ESL_DBG_PRINT__
+ #define esl_printf(...)
+#else
+ #define esl_printf(flag, string_to_be_printed...) do {__esl_printf_flag(flag, string_to_be_printed);} while(0)
+#endif /* __DISABLE_ESL_DBG_PRINT__ */
+
+#else
+ #if !defined(__MTK_TARGET__) && !defined (__DISABLE_ESL_DBG_PRINT__)
+ #define esl_printf(lev, ...) printf(__VA_ARGS__)
+ #else
+ #define esl_printf(...)
+ #endif
+#endif
+
+/* Special esl_printf which always comes out
+ * NOTE: Do not use within any code you are profiling
+ */
+#if defined (__MTK_TARGET__)
+#define esl_fixed_printf(flag, string_to_be_printed...) do {__esl_printf_flag(flag, string_to_be_printed);} while(0)
+#else
+#define esl_fixed_printf(lev, ...) printf(__VA_ARGS__)
+#endif
+
+extern int __esl_printf_flag(kal_uint32 flag, const char *fmt, ...);
+extern int __esl_profiling(kal_uint32 flag, const char *fmt, ...);
+
+/**************************************** VARIOUS HACKS to minimize ammount of protocol stack code changes **********************************/
+#define LOG_NPDCP_DECIPHER_DONE_HANDLER_CALLED() esl_printf(1, "npdcp_decipher_done_handler called\r\n");
+
+/* used in ndpcp_dl_deliver.c */
+extern kal_bool dl_check_deliver_cf0_count_valid;
+
+/* used in epdcp_dl.c */
+//Notify enl1_adapt.c test that data has been delivered
+#define LOG_DLVR_DIDID_TO_UPPER_NRO() dl_check_dlvr_dids_to_upper_layers_valid = KAL_TRUE;
+extern kal_bool dl_check_dlvr_dids_to_upper_layers_valid;
+
+//this overrides macro in dispatch_deliver API to do MASE specific logging
+#undef MD_TRC_ENPDCP_DL_LOG_DISPATCH_DELIVER
+
+//test if PDUs are delivered in sequence without any gaps (this would mean that offline/segmented data path works correctly)
+#define MD_TRC_ENPDCP_DL_LOG_DISPATCH_DELIVER(...)\
+ if (p_begin->cf == 0) {\
+ static int prev_count = -1;\
+ ASSERT(prev_count + 1 == count_begin);\
+ prev_count += total;\
+ esl_printf(1,"deliver_cf0 count begin: %d, end: %d, total: %d\n", count_begin, prev_count, total);\
+ if (prev_count != count_begin)\
+ {\
+ dl_check_deliver_cf0_count_valid = KAL_TRUE;\
+ }\
+ }
+
+/* epdcp_dl_poll_pit_drbam_nrohc_lhif_nro should have has_new_nml_sdu set, and call epdcp_log_dl_nml_data_pdu */
+#undef MD_TRC_EPDCP_DL_LOG_DRB_PROC_NML_SDUS
+#define MD_TRC_EPDCP_DL_LOG_DRB_PROC_NML_SDUS(rb_idx, first_proc_cntl, cur_proc_cntl) esl_printf(1, "EPDCP DL: last_subm_cntl %d\n", cur_proc_cntl);
+#endif /* __MASE_DEBUG_H__ */
+