[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/service/sst/include/us_excep_hdlr.h b/mcu/service/sst/include/us_excep_hdlr.h
new file mode 100644
index 0000000..01be875
--- /dev/null
+++ b/mcu/service/sst/include/us_excep_hdlr.h
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2005
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * us_excep_hdlr.h
+ *
+ * Project:
+ * --------
+ * UMOLYA
+ *
+ * Description:
+ * ------------
+ * This file provides typedefs and definiton for PS index trace.
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+
+#ifndef __US_EXCEP_HDLR_H__
+#define __US_EXCEP_HDLR_H__
+
+#include "usip_ex_common_def.h"
+#include "scq16_ex_common_def.h"
+#include "us_excep_hdlr_format.h"
+
+#include "kal_general_types.h"
+#include "ex_public.h"
+/*******************************************************************************
+ * Definition
+ *******************************************************************************/
+#define USIP_SCQ16_EX_SYNC_TIMEOUT 2000000 /* 2s, only for VRF. USIP,SCQ16: Please use EX_US_SYNC_TIME in cc_ex_item.h */
+#define USIP_SCQ16_EX_INIT_PATTERN 0x62935566
+#define USIP_SCQ16_SECTION_BUFFER_SIZE 256
+#if defined(MT6763) || defined(MT6739) || defined(MT6771) || defined(MT6765)
+ #define USIP0_APB_BASE 0xA0084000
+ #define USIP1_APB_BASE 0xA0085000
+ #define USIP_APB_DBG_EN_OFFSET 0x0
+ #define USIP_APB_MODE_SEL_OFFSET 0x4
+ #define USIP_APB_DBG_INST_OFFSET 0x10
+ #define USIP_APB_DBG_EXECUTE_OFFSET 0x14
+ #define USIP_APB_DBG_WRITE_ADDR_OFFSET 0x18
+ #define USIP_APB_DBG_WRITE_OFFSET 0x1c
+ #define USIP_APB_DBG_STATUS_OFFSET 0x20
+
+ #define USIP_APB_DBG_ATTACH_INST 0x900
+ #define USIP_APB_DBG_REQ_INST 0x811
+ #define USIP_APB_DBG_STATUS_INST 0x803
+ #define USIP_APB_DBG_ADDR_INST 0x801
+ #define USIP_APB_DBG_PM_LOAD_INST 0x840
+ #define USIP_APB_DBG_INSTR_INST 0x802
+ #define USIP_APB_DBG_RESUME_INST 0x812
+
+ #define USIP_CACHE_ALIGN 0x20
+
+#endif
+
+typedef enum
+{
+ EX_STATUS_USIP0_0,
+ EX_STATUS_USIP0_1,
+ EX_STATUS_USIP1_0,
+ EX_STATUS_USIP1_1,
+ EX_STATUS_SCQ16_0,
+ EX_STATUS_SCQ16_1,
+#if !defined(__MD97_IS_2CORES__)
+/* H3 FPGA doesn't have scq16_2 and scq16_3 */
+ EX_STATUS_SCQ16_2,
+ EX_STATUS_SCQ16_3,
+#endif
+ EX_STATUS_USIP_SCQ16_CORE_NUM,
+ EX_STATUS_USIP_SCQ16_CORE_END = 0x6293beef
+} USIP_SCQ16_EX_STATUS_CORE_TYPE;
+
+
+typedef enum
+{
+ USIP0_0_FAIL_BIT_MASK = (1<<0),
+ USIP0_1_FAIL_BIT_MASK = (1<<1),
+ USIP1_0_FAIL_BIT_MASK = (1<<2),
+ USIP1_1_FAIL_BIT_MASK = (1<<3),
+ SCQ0_FAIL_BIT_MASK = (1<<4),
+ SCQ1_FAIL_BIT_MASK = (1<<5),
+ SCQ2_FAIL_BIT_MASK = (1<<6),
+ SCQ3_FAIL_BIT_MASK = (1<<7),
+} USIP_SCQ16_EX_CORE_BIT_MASK_TYPE;
+
+// ----------------- function declaration -------------------
+
+extern kal_bool INT_SyncUsipScqExceptionInfo(void);
+
+extern void INT_GetUsipScqExceptionRecord(USIP_SCQ_EXCEPTION_RECORD_T *record);
+
+extern kal_uint32 INT_GetUsipScqFailCore(void); //0~3: Usip, 4~5: Scq
+
+extern void INT_DumpUsipScqExceptionInfo(EX_TRACE_TYPE trace_type/*0=cadefa*/, kal_char* sys_info_str, kal_uint32 len);
+
+extern kal_char* INT_GetUsipScqCoreName(kal_uint32 core_index); //0~3: Usip, 4~5: Scq
+
+extern kal_uint32 INT_GetUsipScqFailCoreIndex(void);
+
+extern void INT_GetUsipScq16ExceptionHandshakeInit(void);
+
+extern void INT_GetUsipScq16BBMemoryInfo(void);
+
+extern void INT_GetUsip0DumpMemoryInfo(kal_uint32 **info, kal_uint32 *count, kal_uint8* region_config);
+extern void INT_GetUsip1DumpMemoryInfo(kal_uint32 **info, kal_uint32 *count, kal_uint8* region_config);
+extern void INT_GetScq160DumpMemoryInfo(kal_uint32 **info, kal_uint32 *count, kal_uint8* region_config);
+extern void INT_GetScq161DumpMemoryInfo(kal_uint32 **info, kal_uint32 *count, kal_uint8* region_config);
+extern void INT_GetScq162DumpMemoryInfo(kal_uint32 **info, kal_uint32 *count, kal_uint8* region_config);
+extern void INT_GetScq163DumpMemoryInfo(kal_uint32 **info, kal_uint32 *count, kal_uint8* region_config);
+extern void INT_GetVrfDumpMemoryInfo(kal_uint32 **info, kal_uint32 *count, kal_uint8* region_config);
+
+#endif /* __US_EXCEP_HDLR_H__ */