[Feature]Upload Modem source code
Change-Id: Id4294f30faced84d3e6fd6d5e61e1111bf287a37
diff --git a/mcu/tools/emigenflash.pl b/mcu/tools/emigenflash.pl
new file mode 100644
index 0000000..c5b38b6
--- /dev/null
+++ b/mcu/tools/emigenflash.pl
@@ -0,0 +1,2413 @@
+#!/usr/bin/perl
+#
+# Copyright Statement:
+# --------------------
+# This software is protected by Copyright and the information contained
+# herein is confidential. The software may not be copied and the information
+# contained herein may not be used or disclosed except with the written
+# permission of MediaTek Inc. (C) 2006
+#
+# BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+# THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+# RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+# AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+# NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+# SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+# SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+# THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+# NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+# SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+#
+# BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+# LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+# AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+# OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+# MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+#
+# THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+# WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+# LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+# RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+# THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+#
+#*****************************************************************************
+#*
+#* Filename:
+#* ---------
+#* emigenflash.pl
+#*
+#* Project:
+#* --------
+#*
+#*
+#* Description:
+#* ------------
+#* Parse and generate flash parameter
+#*
+#* Author:
+#* -------
+#* Way Chen (mtk54483)
+#*
+#*============================================================================
+#* HISTORY
+#* Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+#*------------------------------------------------------------------------------
+#* $Revision$
+#* $Modtime$
+#* $Log$
+#*
+#* 05 22 2014 tafang.chen
+#* [MOLY00062786] [UMOLY][SM]
+#* Initial MoDIS build env - fix path problem.
+#*
+#* 04 23 2014 guo-huei.chang
+#* [MOLY00062623] [UMOLY] update TK6291 emi
+#* updat emigen flow for generating external emi size when EMI is not in MD own.
+#*
+#* 04 21 2014 guo-huei.chang
+#* [MOLY00063203] [EMIGEN] Update EMIGEN for Smart Phone Project
+#* Update emigen to generate EMI size for none EMI support
+#*
+#*
+#*------------------------------------------------------------------------------
+#* Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+#*============================================================================
+#****************************************************************************/
+
+my $nor_fat_base_offset;
+my $nor_fat_size_offset;
+my $nor_partition_sector_offset;
+my $nor_nand_fat_base_offset;
+my $nor_nand_fat_size_offset;
+my $nor_nand_partition_sector_offset;
+my $nfb_fat_base_offset;
+my $nfb_fat_size_offset;
+my $nfb_partition_sector_offset;
+my $cmem_max_blocks = 0;
+my $cmem_max_sectors = 0;
+my $DebugPrint = 1; # 1 for debug; 0 for non-debug
+#****************************************************************************
+# subroutine: Calculate_FAT_Info
+# input: $info_list_href: input list reference of list of MDL info
+# $combo_mem_count: number of memory devices selected
+# $combo_sip_count: number of SIPs
+# $mem_dev_type: MEMORY_DEVICE_TYPE
+# $info_output_href: output hash reference for common MDL info,
+# including minimum physical flash size,
+# minimum small block start address
+# maximum default FAT base address
+# minimum default FAT size
+# minimum RAM size
+# common flash series information
+# common single/multiple-bank definition
+# common PBP information
+# minimum PBP size
+#****************************************************************************
+sub Calculate_FAT_Info
+{
+ my ($MAKEFILE_OPTIONS_LOCAL, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $COMM_MDL_INFO_LOCAL, $MDL_INFO_LIST_LOCAL, $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL,$nor_size_Mb_LOCAL, $CUSTOM_FEATURE_CFG_OPTIONS_LOCAL, $ENTIRE_BLOCK_INFO_START_LIST_LOCAL, $ENTIRE_BLOCK_INFO_SIZE_LIST_LOCAL) = @_;
+ ### Print out the physical available flash size
+my $flash_limit = sprintf("0x%08X", $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+
+#print "$COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'}, $COMM_MDL_INFO_LOCAL->{1}->{'Flash Size'}\n" if ($DebugPrint == 1);
+
+### Calculate real FAT start address and size based on customization
+if ((defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_BASE_ADDRESS}) && (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_SIZE}))
+{
+ $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_BASE_ADDRESS});
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_SIZE});
+}
+elsif ((defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_BASE_ADDRESS}) && (!defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_SIZE}))
+{
+ $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_BASE_ADDRESS});
+ if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{__NOR_FDM5__}) # for NOR FDM5, small blocks at the end of the flash should not be used
+ {
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL = $COMM_MDL_INFO_LOCAL->{0}->{'Small Block Start'} - hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_BASE_ADDRESS});
+ }
+ else
+ {
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL = $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'} - hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_BASE_ADDRESS});
+ }
+}
+elsif ((!defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_BASE_ADDRESS}) && (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_SIZE}))
+{
+ $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL = $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Base'};
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_SIZE});
+}
+else
+{
+ $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL = $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Base'};
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL = $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Size'};
+}
+
+if($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+{
+ $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Base'} = $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL;
+ $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Size'} = $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL;
+}
+elsif($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE')
+{
+ $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Base'} = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_BASE_ADDRESS});
+ $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Size'} = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_SIZE});
+}
+
+### work-around for bad small block issue
+my $fat_size_shrink;
+if ((($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL+$$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL)>$COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'}) && (($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL+$$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL)<=($nor_size_Mb_LOCAL/8*1024*1024)))
+{
+ $fat_size_shrink = sprintf(" - 0x%08x", $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL+$$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL-$COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL = $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL - ($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL+$$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL-$COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+}
+
+#print "NOR_FLASH_BASE_ADDRESS_VAL = $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, NOR_ALLOCATED_FAT_SPACE_VAL = $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL\n" if ($DebugPrint == 1);
+
+### Check FAT settings validity
+&error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: FAT space cannot exceed physical NOR flash size!", __FILE__, __LINE__)
+ if (($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL<0) || ($$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL<0));
+&error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: FAT space cannot exceed physical NOR flash size!", __FILE__, __LINE__)
+ if (($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL+$$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL) > ($COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'}));
+if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{__NOR_FDM5__})
+{
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: FAT space cannot include small blocks in NOR FDM 5.0!", __FILE__, __LINE__)
+ if (($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL+$$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL) > $COMM_MDL_INFO_LOCAL->{0}->{'Small Block Start'});
+}
+
+### FAT tuning for FOTA
+$nor_fat_base_offset = "0x0";
+$nor_fat_size_offset = "0x0";
+$nor_partition_sector_offset = 0;
+$nor_nand_fat_base_offset = "0x0";
+$nor_nand_fat_size_offset = "0x0";
+$nor_nand_partition_sector_offset = 0;
+$nfb_fat_base_offset = "0x0";
+$nfb_fat_size_offset = "0x0";
+$nfb_partition_sector_offset = 0;
+
+##FOTA Feature Related Code, Currently we do not use in MT6290
+if ($MAKEFILE_OPTIONS_LOCAL->{'fota_enable'} eq 'FOTA_DM')
+{
+ if ($MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} ne 'NONE')
+ {
+ ###
+ # image head area size = block number * block size (0x20000)
+ # = (1(FOTA_BL_IMG_MAX_SIZE) + 6(FOTA_UE_RESIDENT_FLASH_SPACE_SIZE) + 6(FOTA_UE_BACKUP_FLASH_SPACE_SIZE) + 8(image list block) + 1(ext_bootloader) + 2(bad block margin)) * 0x20000 = 0x300000
+ my $image_head_area_size = 0x300000;
+
+ my ($package_storage_base, $package_storage_size);
+ ###
+ # FOTA_PACKAGE_STORAGE_BASE = image head area size + all ROM sizes (ROM, SECONDARY_ROM, THIRD_ROM, DEMAND_PAGING_ROM0)
+ if (defined $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} and $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} eq 'ENFB')
+ {
+ $package_storage_base = $image_head_area_size + 0x900000 + 0x1500000 + 0x800000;
+ }
+ elsif (defined $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} and $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} eq 'ONDEMAND')
+ {
+ $package_storage_base = $image_head_area_size + 0x400000 + 0xC00000 + 0xE00000;
+ }
+ elsif (defined $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} and $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} eq 'MIXED')
+ {
+ $package_storage_base = $image_head_area_size + 0x400000 + 0xF00000 + 0x800000 + 0x400000;
+ }
+ elsif (defined $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} and $MAKEFILE_OPTIONS_LOCAL->{'nand_flash_booting'} eq 'BASIC')
+ {
+ $package_storage_base = $image_head_area_size + 0x800000 + 0x1600000;
+ }
+ $package_storage_size = (hex($CUSTOM_FEATURE_CFG_OPTIONS_LOCAL->{CONFIG_FOTA_PACKAGE_AREA_SIZE}) / 0x20000) * 0x20000;
+
+ my $recommend_fat_base;
+ if ($MAKEFILE_OPTIONS_LOCAL->{'secure_support'} eq 'TRUE')
+ {
+ # When SECURE_SUPPORT = TRUE, FAT_BASE_ADDRESS = FOTA_PACKAGE_STORAGE_BASE + FOTA_PACKAGE_STORAGE_SIZE + ((4 + FOTA_EXTRA_RESERVED_BLOCKS) * (block size)0x20000)
+ $recommend_fat_base = $package_storage_base + $package_storage_size + ((4 + 5) * 0x20000);
+ }
+ else
+ {
+ # When SECURE_SUPPORT = FALSE, FAT_BASE_ADDRESS = FOTA_PACKAGE_STORAGE_BASE + FOTA_PACKAGE_STORAGE_SIZE
+ $recommend_fat_base = $package_storage_base + $package_storage_size;
+ }
+ if (($recommend_fat_base - hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_BASE_ADDRESS})) > 0)
+ {
+ $nfb_fat_base_offset = sprintf("0x%08X", $recommend_fat_base - hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_BASE_ADDRESS}));
+ $nfb_fat_size_offset = sprintf("0x%08X", $recommend_fat_base - hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_BASE_ADDRESS}));
+ if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_FIRST_DRIVE_SECTORS})
+ {
+ my $nand_fat_partition_sectors;
+ if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_FIRST_DRIVE_SECTORS} =~ /\(*(\d+)\)*/)
+ {
+ $nand_fat_partition_sectors = $1;
+ }
+ $nfb_partition_sector_offset = sprintf("%d", ($recommend_fat_base - hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_BASE_ADDRESS})) / 512) if (($nand_fat_partition_sectors - ($recommend_fat_base-hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NAND_BOOTING_NAND_FS_BASE_ADDRESS}))/512) >= 4096); # NAND user drive should be no less than 4096 sectors
+ }
+ }
+ }
+ elsif ($MAKEFILE_OPTIONS_LOCAL->{'system_drive_on_nand'} eq 'TRUE' or $MAKEFILE_OPTIONS_LOCAL->{'fota_update_package_on_nand'} eq 'TRUE')
+ {
+ my $package_storage_size = (hex($CUSTOM_FEATURE_CFG_OPTIONS_LOCAL->{CONFIG_FOTA_PACKAGE_AREA_SIZE}) / 0x20000) * 0x20000;
+ $nor_nand_fat_base_offset = sprintf("0x%08X", $package_storage_size);
+ $nor_nand_fat_size_offset = sprintf("0x%08X", $package_storage_size);
+ if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NAND_FS_FIRST_DRIVE_SECTORS})
+ {
+ my $nand_fat_partition_sectors;
+ if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NAND_FS_FIRST_DRIVE_SECTORS} =~ /\(*(\d+)\)*/)
+ {
+ $nand_fat_partition_sectors = $1;
+ }
+ $nor_nand_partition_sector_offset = sprintf("%d", $package_storage_size / 512) if (($nand_fat_partition_sectors - ($package_storage_size)/512) >= 4096); # NAND user drive should be no less than 4096 sectors
+ }
+ }
+ elsif (!exists $MAKEFILE_OPTIONS_LOCAL->{'emmc_booting'} or $MAKEFILE_OPTIONS_LOCAL->{'emmc_booting'} eq 'NONE') # FOTA update package will be put in a different partition from FS
+ {
+ my $fota_block_number = $CUSTOM_FEATURE_CFG_OPTIONS_LOCAL->{CONFIG_FOTA_PACKAGE_BLOCK_NUMBER};
+ my $ori_nor_flash_base_address_val = $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL;
+ my $ori_nor_allocated_fat_space_val = $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL;
+
+ ### Package Storage
+ while ($fota_block_number > 0)
+ {
+ my $tmp_block_sz;
+ $tmp_block_sz = &config_query_flash_block_sz($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, $COMM_MDL_INFO_LOCAL,$ENTIRE_BLOCK_INFO_START_LIST_LOCAL, $ENTIRE_BLOCK_INFO_SIZE_LIST_LOCAL);
+
+ $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL += $tmp_block_sz;
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL -= $tmp_block_sz;
+ $fota_block_number--;
+ }
+
+ ### Backup Storage
+ my $query_address = 0;
+ my $max_block_size = 0;
+ while ($query_address < $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'})
+ {
+ my $cur_block_size = &config_query_flash_block_sz($query_address, $COMM_MDL_INFO_LOCAL, $ENTIRE_BLOCK_INFO_START_LIST_LOCAL, $ENTIRE_BLOCK_INFO_SIZE_LIST_LOCAL);
+ if ($cur_block_size > $max_block_size)
+ {
+ $max_block_size = $cur_block_size;
+ }
+ $query_address += $cur_block_size;
+ }
+ $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL += 2 * $max_block_size;
+ $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL -= 2 * $max_block_size;
+
+ if (($$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL - $ori_nor_flash_base_address_val) > 0)
+ {
+ $nor_fat_base_offset = sprintf("0x%08X", $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL - $ori_nor_flash_base_address_val);
+ $nor_fat_size_offset = sprintf("0x%08X", $$ori_nor_allocated_fat_space_val - $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL);
+ if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_FIRST_DRIVE_SECTORS})
+ {
+ my $nor_fat_partition_sectors;
+ if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_FS_FIRST_DRIVE_SECTORS} =~ /\(*(\d+)\)*/)
+ {
+ $nor_fat_partition_sectors = $1;
+ }
+ $nor_partition_sector_offset = sprintf("%d", ($ori_nor_allocated_fat_space_val - $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL) / 512) if (($nor_fat_partition_sectors - ($ori_nor_allocated_fat_space_val-$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL)/512) >= 128); # NOR user drive should be no less than 128 sectors
+ }
+ }
+ }
+}##end if ($MAKEFILE_OPTIONS_LOCAL->{'fota_enable'} eq 'FOTA_DM')
+
+### Calculate TOTAL_BLOCKS and NOR_BLOCK_SIZE by different memory devices
+$cmem_max_blocks = 0;
+$cmem_max_sectors = 0;
+$nor_block_size = 0;
+for (1..$CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT})
+{
+ my $mem_idx = $_;
+ my (@cur_regions, @cur_banks, @cur_blocks, @cur_new_regions, @cur_blocks_start, @cur_blocks_size);
+ my $cur_blocks_sum = 0;
+ my $cur_regions_sum = 0;
+ my $cur_total_blocks = 0;
+ my $cur_nor_block_size = 0;
+ my $cur_total_sectors = 0;
+ my $cur_sector_size = 0;
+ my $cur_bank_str = 0;
+ my $cur_block_str = 0;
+
+ $cur_sector_size = ($MDL_INFO_LIST_LOCAL->[$mem_idx]->{1}->{'Comm. Series'} eq 'INTEL_SIBLEY') ? 0x400 : 0x200;
+ ##MDL CS1 is flash, COMM MDL number 0 is flash info
+ @cur_regions = &split_info($MDL_INFO_LIST_LOCAL->[$mem_idx]->{1}->{'Last Bank'}->{'Region'});
+ $cur_bank_str = $MDL_INFO_LIST_LOCAL->[$mem_idx]->{1}->{'Device Geometry'}->{'Bank Info.'};
+ @cur_banks = &split_info($cur_bank_str);
+ $cur_block_str = $MDL_INFO_LIST_LOCAL->[$mem_idx]->{1}->{'Device Geometry'}->{'Block Info.'};
+ @cur_blocks = &split_info($cur_block_str);
+
+ for (0..$#cur_blocks)
+ {
+ if ($cur_blocks[$_] =~ /\{(0x\w+),\s*(0x\w+)\}/) # match {0x0,0x10000}
+ {
+ last if (hex($1) >= $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'}); # end block infor traversal when the flash end among all memories has been reached
+ push @cur_blocks_start, $1;
+ push @cur_blocks_size, $2;
+ }
+ }
+ push @cur_blocks_start, $flash_limit;
+ for (0..($#cur_blocks_start-1))
+ {
+ my $target_region = $cur_blocks_size[$_];
+ my $tmp_block_count = 0;
+ print "$_: $target_region\n"if ($DebugPrint == 1);
+
+ while ($cur_blocks_sum < hex($cur_blocks_start[$_+1]))
+ {
+ $cur_blocks_sum += hex($cur_blocks_size[$_]);
+ if ($cur_blocks_sum > $$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL)
+ {
+ $cur_regions_sum += hex($cur_blocks_size[$_]);
+ $tmp_block_count++;
+ }
+ last if ($cur_regions_sum >= $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL);
+ }
+ if ($tmp_block_count > 0)
+ {
+ $cur_total_blocks += $tmp_block_count;
+ if (hex($target_region) > hex($cur_nor_block_size)) # Find the largest block size within FS
+ {
+ $cur_nor_block_size = $target_region;
+ }
+ }
+ last if ($cur_regions_sum >= $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL);
+ }
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: FAT space must be multiples of blocks!", __FILE__, __LINE__) if ($cur_regions_sum > $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL);
+
+ ### Calculate the current number of sectors
+ ### S1 = ((NOR_ALLOCATED_FAT_SPACE - NOR_BLOCK_SIZEMCP1 * SNOR_ERASE_QUEUE_SIZE) / SECTOR_SIZE)
+ ### NOR_ALLOCATED_FAT_SPACE := NOR_BOOTING_NOR_FS_SIZE
+ ### SNOR_ERASE_QUEUE_SIZE := NOR_FDM4_ESB_PARAMETER_ERASE_QUEUE_SIZE or 5 (default value)
+ ### NOR_SYSTEM_DRIVE_RESERVED_BLOCK := NOR_PARAMETER_SYSTEM_DRIVE_RESERVED_BLOCK or 3 (default value)
+ ### NOR_BLOCK_SIZEMCP1 := The largest block size within FAT in MCP 1.
+ ### SECTOR_SIZE:
+ ### Sibley:=0x400
+ ### Non-Sibley := 0x200
+ if ($MAKEFILE_OPTIONS_LOCAL->{'enhanced_single_bank_nor_flash_support'} eq 'TRUE')
+ {
+ $cur_total_sectors = ($$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL - (hex($cur_nor_block_size) * $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_FDM4_ESB_PARAMETER_ERASE_QUEUE_SIZE})) / $cur_sector_size;
+ }
+ else
+ {
+ $cur_total_sectors = ($$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL - (hex($cur_nor_block_size) * $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_PARAMETER_SYSTEM_DRIVE_RESERVED_BLOCK})) / $cur_sector_size;
+ }
+ print "FAT SPACE is: $$NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL, BlockSize is: $cur_nor_block_size, SectorSize is $cur_sector_size\n"if ($DebugPrint == 1);
+
+ ### Find the overall max TOTAL_BLOCKS and NOR_BLOCK_SIZE
+ if ($nor_block_size < hex($cur_nor_block_size))
+ {
+ $nor_block_size = hex($cur_nor_block_size);
+ }
+ if ($cmem_max_blocks < $cur_total_blocks)
+ {
+ $cmem_max_blocks = $cur_total_blocks;
+ }
+ if ($cmem_max_sectors < $cur_total_sectors)
+ {
+ $cmem_max_sectors = $cur_total_sectors;
+ }
+}
+print "TOTAL_BLOCKS > 127 , recommend enable FDM5.0 feature!\n" if ($cmem_max_blocks > 127);
+}
+
+#****************************************************************************
+# subroutine: Validate_FAT_NORRAWDISK_OVERLAP
+# input: $info_list_href: input list reference of list of MDL info
+# $combo_mem_count: number of memory devices selected
+# $combo_sip_count: number of SIPs
+# $mem_dev_type: MEMORY_DEVICE_TYPE
+# $info_output_href: output hash reference for common MDL info,
+# including minimum physical flash size,
+# minimum small block start address
+# maximum default FAT base address
+# minimum default FAT size
+# minimum RAM size
+# common flash series information
+# common single/multiple-bank definition
+# common PBP information
+# minimum PBP size
+#****************************************************************************
+sub Validate_FAT_NORRAWDISK_OVERLAP
+{
+ my ($CUSTOM_MEM_DEV_OPTIONS_LOCAL, $COMM_MDL_INFO, $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL, $CUSTOM_MEMORY_DEVICE_HDR_LOCAL) = @_;
+ my %dsk_layout_hash;
+ my @dsk_layout_sort_list;
+ $dsk_layout_hash{$NOR_FLASH_BASE_ADDRESS_VAL_LOCAL} = $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL;
+ if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK0_BASE_ADDRESS})
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot configure NOR Raw Disk0 larger than physical NOR flash size!", __FILE__, __LINE__)
+ if ((hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK0_BASE_ADDRESS})+hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK0_SIZE})) > $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot configure NOR Raw Disk0 the same base address as FAT!", __FILE__, __LINE__)
+ if (hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK0_BASE_ADDRESS}) == $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL);
+ $dsk_layout_hash{hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK0_BASE_ADDRESS})} = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK0_SIZE});
+ }
+ if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL{NOR_BOOTING_NOR_DISK1_BASE_ADDRESS})
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot configure NOR Raw Disk1 larger than physical NOR flash size!", __FILE__, __LINE__)
+ if ((hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK1_BASE_ADDRESS})+hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK1_SIZE})) > $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot configure NOR Raw Disk1 the same base address as FAT!", __FILE__, __LINE__)
+ if (hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK1_BASE_ADDRESS}) == $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL);
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot configure NOR Raw Disk1 the same base address as NOR Raw Disk0!", __FILE__, __LINE__)
+ if (hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK1_BASE_ADDRESS}) == hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK0_BASE_ADDRESS}));
+ $dsk_layout_hash{hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK1_BASE_ADDRESS})} = hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK1_SIZE});
+ }
+ foreach (sort {$a <=> $b} keys %dsk_layout_hash)
+ {
+ push @dsk_layout_sort_list, $_;
+ }
+ foreach (1..$#dsk_layout_sort_list)
+ {
+ error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: NOR Flash disk overlapping detected. Please check NOR Raw disk and FAT setting!", __FILE__, __LINE__)
+ if (($dsk_layout_sort_list[$_-1]+$dsk_layout_hash{$dsk_layout_sort_list[$_-1]}) > $dsk_layout_sort_list[$_]);
+ }
+}
+
+#****************************************************************************
+# subroutine: Calculate_NORRAWDISK_Region_Info
+# input: $info_list_href: input list reference of list of MDL info
+# $combo_mem_count: number of memory devices selected
+# $combo_sip_count: number of SIPs
+# $mem_dev_type: MEMORY_DEVICE_TYPE
+# $info_output_href: output hash reference for common MDL info,
+# including minimum physical flash size,
+# minimum small block start address
+# maximum default FAT base address
+# minimum default FAT size
+# minimum RAM size
+# common flash series information
+# common single/multiple-bank definition
+# common PBP information
+# minimum PBP size
+#****************************************************************************
+sub Calculate_NORRAWDISK_Region_Info
+{
+ my ($CUSTOM_MEM_DEV_OPTIONS_LOCAL) = @_;
+ my (@regions_disk0, @regions_disk1);
+ for (0..$CUSTOM_MEM_DEV_OPTIONS_LOCAL->{NOR_BOOTING_NOR_DISK_NUM})
+ {
+ my $nor_booting_nor_disk_base_address = sprintf("NOR_BOOTING_NOR_DISK%d_BASE_ADDRESS", $_);
+ my $nor_booting_nor_disk_size = sprintf("NOR_BOOTING_NOR_DISK%d_SIZE", $_);
+ my $nor_booting_nor_disk_index = $_;
+ #print "[$nor_booting_nor_disk_index] Nor Disk Base: $nor_booting_nor_disk_base_address\n"if ($DebugPrint == 1);
+ #print "[$nor_booting_nor_disk_index] Nor Disk Size: $nor_booting_nor_disk_size\n"if ($DebugPrint == 1);
+
+ if (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{$nor_booting_nor_disk_base_address})
+ {
+ #print "RAW DISK Check!\n"if ($DebugPrint == 1);
+ for (0..($#entire_block_info_start_list-1))
+ {
+ my $target_region;
+ my $tmp_block_count = 0;
+ my $tmp_blocks_sum = 0;
+ my $tmp_regions_sum = 0;
+ while ($tmp_blocks_sum < $entire_block_info_start_list[$_+1])
+ {
+ $tmp_blocks_sum += $entire_block_info_size_list[$_];
+ if ($tmp_blocks_sum > hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{$nor_booting_nor_disk_base_address}))
+ {
+ $tmp_regions_sum += $entire_block_info_size_list[$_];
+ $target_region = sprintf("0x%X", $entire_block_info_size_list[$_]);
+ $tmp_block_count++;
+ }
+ if ($tmp_regions_sum >= hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{$nor_booting_nor_disk_size}))
+ {
+ last;
+ }
+ }
+ if ($tmp_block_count > 0)
+ {
+ if ($nor_booting_nor_disk_index == 0)
+ {
+ push @regions_disk0, "{$target_region,$tmp_block_count}";
+ }
+ elsif ($nor_booting_nor_disk_index == 1)
+ {
+ push @regions_disk1, "{$target_region,$tmp_block_count}";
+ }
+ }
+ if ($tmp_regions_sum >= hex($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{$nor_booting_nor_disk_size}))
+ {
+ last;
+ }
+ }
+ }
+ }
+}
+#****************************************************************************
+# subroutine: get_common_MDL_info
+# input: $info_list_href: input list reference of list of MDL info
+# $combo_mem_count: number of memory devices selected
+# $combo_sip_count: number of SIPs
+# $mem_dev_type: MEMORY_DEVICE_TYPE
+# $info_output_href: output hash reference for common MDL info,
+# including minimum physical flash size,
+# minimum small block start address
+# maximum default FAT base address
+# minimum default FAT size
+# minimum RAM size
+# common flash series information
+# common single/multiple-bank definition
+# common PBP information
+# minimum PBP size
+#****************************************************************************
+sub get_common_MDL_info
+{
+ #my ($info_list_href, $combo_mem_count, $combo_sip_count, $mem_dev_type, $info_output_href, $LPSDRAM_CHIP_SELECT_LOCAL, $MAKEFILE_OPTIONS, $CUSTOM_MEM_DEV_OPTIONS, $CUSTOM_MEMORY_DEVICE_HDR) = @_;
+ my ($info_list_href, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $info_output_href, $MAKEFILE_OPTIONS_LOCAL, $LPSDRAM_CHIP_SELECT_LOCAL, $CUSTOM_MEMORY_DEVICE_HDR_LOCAL, $emi_is_existed) = @_;
+ my $combo_mem_count = $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT};
+ my $combo_sip_count = $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_SIP_ENTRY_COUNT};
+ my $mem_dev_type = $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE};
+ my $platform = $MAKEFILE_OPTIONS_LOCAL->{'platform'};
+ my $min_flash_size = 0xffffffff;
+ my $max_nand_block_size = 0;
+ my $min_small_block_start = 0xffffffff;
+ my $max_fat_base = 0;
+ my $min_fat_space = 0xffffffff;
+ my $Size_Mb_ram_min = 0xffffffff*8/1024/1024; # minimum size in "Size (Mb)" field for RAM
+ my $ADMUX_CS0;
+ my $ADMUX_CS1;
+ my $if_DRAM;
+ my $Comm_Series_CS0_all = '*'; # all "Comm. Series" information
+ my $Comm_Series_CS1_all = '*'; # all "Comm. Series" information
+ my $Bank_if_S = 'M'; # mark as 'S' if there is any device whose "Bank" field is 'S'
+ my $PBP_Y_N_if_Y = 'N'; # mark as 'N' if there is any device whose "PBP -> Y/N" field is 'N'
+ my $PBP_Size_W_min = 0xffffffff; # minimum size in "PBP -> Size(W)" field
+ my $Last_Bank_Region; # common "Last Bank -> Region" field
+ my $Geometry_Bank_Info; # common "Geometry -> Bank Info." field
+ my $Geometry_Block_Info; # common "Geometry -> Block Info." field
+
+ #print "Flash PN: $info_list_href->[1]->{1}->{'Part Number'}, $info_list_href->[1]->{1}->{'Flash Size'}\n";
+
+ for (1..$combo_mem_count)
+ {
+ ### Find the smallest default FAT configuration among all MCPs
+ my $cur_flash_size = 0; # physical flash size (excluding bad small blocks for Toshiba)
+ my $cur_small_block_start = 0; # the starting location of small blocks at the end of a flash
+ my $cur_sum_of_regions = 0; # the sum of the regions in the last bank
+ my $cur_fat_base = 0; # default FAT base (physical flash size - last bank size)
+ my $cur_fat_space = 0; # default FAT size (last bank size)
+ my @cur_blocks_start; # list of Block Info starting addresses
+ my @cur_blocks_size; # list of Block Info sizes
+ my @cur_regions = &split_info($info_list_href->[$_]->{1}->{'Last Bank'}->{'Region'}); # list of Last Bank -> Region Info.
+ my $cur_bank_str = $info_list_href->[$_]->{1}->{'Device Geometry'}->{'Bank Info.'};
+ my @cur_banks = &split_info($cur_bank_str); # list of Bank Info.
+ my $cur_block_str = $info_list_href->[$_]->{1}->{'Device Geometry'}->{'Block Info.'};
+ my @cur_blocks = &split_info($cur_block_str); # list of Block Info.
+
+ # Calculate default FAT size/start address (Last Bank)
+ for (0..$#cur_regions) # calculate the sum of last bank
+ {
+ if ($cur_regions[$_] =~ /\{(0x\w+)\s*,\s*(\d+)\}/) # match {0x20000, 7}
+ {
+ $cur_sum_of_regions += hex($1) * $2;
+ }
+ }
+ for (0..$#cur_banks) # calculate the physical flash size
+ {
+ if ($cur_banks[$_] =~ /\{(0x\w+)\s*,\s*(\d+)\}/) # match {0x20000, 7}
+ {
+ $cur_flash_size += hex($1) * $2;
+ $cur_small_block_start += hex($1) * $2;
+ }
+ }
+ if (($#cur_regions>0) && (defined $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{__NOR_FDM5__})) # for NOR FDM5, small blocks at the end of the flash should be excluded
+ {
+ if ($cur_blocks[$#cur_blocks] =~ /\{(0x\w+)\s*,\s*(0x\w+)\}/) # match {0xFF0000,0x2000}
+ {
+ $cur_small_block_start = hex($1);
+ }
+ $cur_fat_space = $cur_sum_of_regions - ($cur_flash_size-$cur_small_block_start);
+ }
+ else
+ {
+ $cur_fat_space = $cur_sum_of_regions;
+ }
+ $cur_fat_base = $cur_flash_size - $cur_sum_of_regions;
+
+ ##MT6290 Operation
+ #if($platform eq 'MT6290')
+ #{
+ if ($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE')
+ {
+ if (defined $info_list_href->[$_]->{1}->{'NAND Size(MB)'})##Fill NAND Flash Size if NAND Flash is exist
+ {
+ $cur_flash_size = $info_list_href->[$_]->{1}->{'NAND Size(MB)'} * 1024 * 1024;
+ }
+ else
+ {
+ $cur_flash_size = 0xffffffff;
+ }
+ }
+ #}
+
+ # Temporarily store physical flash size, small block start, and default FAT size/base for future reference
+ $info_list_href->[$_]->{1}->{'Flash Size'} = $cur_flash_size;
+ $info_list_href->[$_]->{1}->{'Small Block Start'} = $cur_small_block_start;
+ $info_list_href->[$_]->{1}->{'Default FAT Base'} = $cur_fat_base;
+ $info_list_href->[$_]->{1}->{'Default FAT Size'} = $cur_fat_space;
+
+ #print "Flash PN: $info_list_href->[$_]->{1}->{'Part Number'}, FlashSize: $info_list_href->[$_]->{1}->{'Flash Size'}, SmallBlockStart: $info_list_href->[$_]->{1}->{'Small Block Start'}, FATBase: $info_list_href->[$_]->{1}->{'Default FAT Base'}, FATSize: $info_list_href->[$_]->{1}->{'Default FAT Size'}\n"if ($DebugPrint == 1);
+ # In order to speed-up, assume the largest FAT base will be smaller than the physical flash size first
+ # Find the largest FAT base
+ if ($max_fat_base < $cur_fat_base)
+ {
+ $max_fat_base = $cur_fat_base;
+ }
+ # Find the smallest flash size
+ if ($min_flash_size > $cur_flash_size)
+ {
+ $min_flash_size = $cur_flash_size;
+ }
+ # Find the smallest small block start
+ if ($min_small_block_start > $cur_small_block_start)
+ {
+ $min_small_block_start = $cur_small_block_start;
+ }
+
+ ### Find the minimum RAM size in Mb
+
+ my $cur_Size_Mb_ram = $info_list_href->[$_]->{0}->{'Density (Mb)'};
+ if ($Size_Mb_ram_min > $cur_Size_Mb_ram)
+ {
+ $Size_Mb_ram_min = $cur_Size_Mb_ram;
+ }
+
+ ### Find common ADMUX definition
+ if ($info_list_href->[$_]->{0}->{'ADMUX'} =~ /YES/i)
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot select ADMUX/AD-DEMUX at one time! Please change selected MCP!", __FILE__, __LINE__) if ($ADMUX_CS0 eq "NO");
+ $ADMUX_CS0 = "YES";
+ }
+ elsif ($info_list_href->[$_]->{0}->{'ADMUX'} =~ /NO/i)
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot select ADMUX/AD-DEMUX at one time! Please change selected MCP!", __FILE__, __LINE__) if ($ADMUX_CS0 eq "YES");
+ $ADMUX_CS0 = "NO";
+ }
+ if ($info_list_href->[$_]->{1}->{'ADMUX'} =~ /YES/i)
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot select ADMUX/AD-DEMUX at one time! Please change selected MCP!", __FILE__, __LINE__) if ($ADMUX_CS1 eq "NO");
+ $ADMUX_CS1 = "YES";
+ }
+ elsif ($info_list_href->[$_]->{1}->{'ADMUX'} =~ /NO/i)
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot select ADMUX/AD-DEMUX at one time! Please change selected MCP!", __FILE__, __LINE__) if ($ADMUX_CS1 eq "YES");
+ $ADMUX_CS1 = "NO";
+ }
+
+ ### Find common "DRAM" information
+ if ($info_list_href->[$_]->{1}->{'DRAM'} =~ /YES/i)
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot select DRAM/PSRAM at one time! Please change selected MCP!", __FILE__, __LINE__) if ($if_DRAM eq "NO");
+ $if_DRAM = "YES";
+ }
+ elsif ($info_list_href->[$_]->{1}->{'DRAM'} =~ /NO/i)
+ {
+ &error_handler("$CUSTOM_MEMORY_DEVICE_HDR_LOCAL: Cannot select DRAM/PSRAM at one time! Please change selected MCP!", __FILE__, __LINE__) if ($if_DRAM eq "YES");
+ $if_DRAM = "NO";
+ }
+
+ ### Find common "Comm. Series" information
+ if ((defined $info_list_href->[$_]->{1}->{'Comm. Series'}) and ($info_list_href->[$_]->{1}->{'Comm. Series'} ne '*'))
+ {
+ if ($Comm_Series_CS0_all eq '*')
+ {
+ $Comm_Series_CS0_all = $info_list_href->[$_]->{1}->{'Comm. Series'};
+ }
+ else
+ {
+ $Comm_Series_CS0_all .= " $info_list_href->[$_]->{1}->{'Comm. Series'}";
+ }
+ }
+
+ if ((defined $info_list_href->[$_]->{1}->{'Comm. Series'}) and ($info_list_href->[$_]->{1}->{'Comm. Series'} ne '*'))
+ {
+ if ($Comm_Series_CS1_all eq '*')
+ {
+ $Comm_Series_CS1_all = $info_list_href->[$_]->{1}->{'Comm. Series'};
+ }
+ else
+ {
+ $Comm_Series_CS1_all .= " $info_list_href->[$_]->{1}->{'Comm. Series'}";
+ }
+ }
+
+ ### Find common single/multiple-bank definition
+ if ($info_list_href->[$_]->{1}->{'Bank'} =~ /S/i)
+ {
+ $Bank_if_S = 'S';
+ }
+
+ ### Find common PBP information
+ if ($info_list_href->[$_]->{1}->{'PBP'}->{'Y / N'} =~ /Y/i)
+ {
+ $PBP_Y_N_if_Y = 'Y';
+ }
+ #print "PBP1: $info_list_href->[$_]->{1}->{'PBP'}->{'Y / N'}, PBP2: $info_list_href->[$_]->{1}->{'PBP'}->{'Size (Byte)'}\n"if ($DebugPrint == 1);
+
+ ### Find the minimum PBP size
+ my $cur_PBP_size_W = ($mem_dev_type eq 'NOR_RAM_MCP') ? ($info_list_href->[$_]->{0}->{'PBP'}->{'Size(W)'}) : ($info_list_href->[$_]->{1}->{'PBP'}->{'Size (Byte)'}/2);
+ if ($cur_PBP_size_W eq '*' or $cur_PBP_size_W eq 'x' or $cur_PBP_size_W eq ' ')
+ {
+ $cur_PBP_size_W = 0;
+ }
+ if ($PBP_Size_W_min > $cur_PBP_size_W)
+ {
+ $PBP_Size_W_min = $cur_PBP_size_W;
+ }
+
+ ### Find the max block size
+ if (defined $info_list_href->[$_]->{$LPSDRAM_CHIP_SELECT_LOCAL}->{'NAND Block Size(KB)'})
+ {
+ if ($max_nand_block_size < $info_list_href->[$_]->{$LPSDRAM_CHIP_SELECT_LOCAL}->{'NAND Block Size(KB)'} * 1024)
+ {
+ $max_nand_block_size = $info_list_href->[$_]->{$LPSDRAM_CHIP_SELECT_LOCAL}->{'NAND Block Size(KB)'} * 1024;
+ }
+ }
+
+ }##end for (1..$combo_mem_count)
+
+ ### Work around when the FAT base is larger than some flash size
+ if (($max_fat_base > $min_flash_size) or ($max_fat_base > $min_small_block_start))
+ {
+ $max_fat_base = 0;
+ for (1..$combo_mem_count)
+ {
+ if (($info_list_href->[$_]->{1}->{'Default FAT Base'} < $min_flash_size) and ($info_list_href->[$_]->{1}->{'Default FAT Base'} < $min_small_block_start) and ($max_fat_base < $info_list_href->[$_]->{1}->{'Default FAT Base'}))
+ {
+ $max_fat_base = $info_list_href->[$_]->{1}->{'Default FAT Base'};
+ }
+ }
+ }
+ $min_fat_space = $min_flash_size - $max_fat_base;
+
+ for (1..$combo_mem_count)
+ {
+ my $cur_Size_Mb_ram;
+ $cur_Size_Mb_ram = $info_list_href->[$_]->{0}->{'Density (Mb)'};
+ if ($Size_Mb_ram_min > $cur_Size_Mb_ram)
+ {
+ $Size_Mb_ram_min = $cur_Size_Mb_ram;
+ }
+ }
+
+ $info_output_href->{0}->{'Flash Size'} = $min_flash_size;
+ $info_output_href->{0}->{'NAND Block Size(KB)'} = $max_nand_block_size / 1024;
+ $info_output_href->{0}->{'Small Block Start'} = $min_small_block_start;
+ $info_output_href->{0}->{'Default FAT Base'} = $max_fat_base;
+ $info_output_href->{0}->{'Default FAT Size'} = $min_fat_space;
+ $info_output_href->{1}->{'Size (Mb)'} = $Size_Mb_ram_min;
+ $info_output_href->{0}->{'ADMUX'} = $ADMUX_CS0;
+ $info_output_href->{1}->{'ADMUX'} = $ADMUX_CS1;
+ $info_output_href->{1}->{'DRAM'} = $if_DRAM;
+ $info_output_href->{0}->{'Comm. Series'} = $Comm_Series_CS0_all;
+ $info_output_href->{1}->{'Comm. Series'} = $Comm_Series_CS1_all;
+ $info_output_href->{0}->{'Bank'} = $Bank_if_S;
+ $info_output_href->{0}->{'PBP'}->{'Y / N'} = $PBP_Y_N_if_Y;
+ $info_output_href->{0}->{'PBP'}->{'Size(W)'} = $PBP_Size_W_min;
+
+
+ #print "FlashSize[0] is $info_output_href->{0}->{'Flash Size'}, FlashSize[1] is $info_output_href->{1}->{'Flash Size'}\n"if ($DebugPrint == 1);
+ #print "NANDBlockSize[0] is $info_output_href->{0}->{'NAND Block Size(KB)'}, NANDBlockSize[1] is $info_output_href->{1}->{'NAND Block Size(KB)'}\n"if ($DebugPrint == 1);
+ #print "SmallBlockStart[0] is $info_output_href->{0}->{'Small Block Start'}, SmallBlockStart[1] is $info_output_href->{1}->{'Small Block Start'}\n"if ($DebugPrint == 1);
+ #print "DefaultFATBase[0] is $info_output_href->{0}->{'Default FAT Base'}, DefaultFATBase[1] is $info_output_href->{1}->{'Default FAT Base'}\n"if ($DebugPrint == 1);
+ #print "DefaultFATSize[0] is $info_output_href->{0}->{'Default FAT Size'}, DefaultFATSize[1] is $info_output_href->{1}->{'Default FAT Size'}\n"if ($DebugPrint == 1);
+ #print "Size[0] is $info_output_href->{0}->{'Size (Mb)'}, Size[1] is $info_output_href->{1}->{'Size (Mb)'}\n"if ($DebugPrint == 1);
+ #print "ADMUX[0] is $info_output_href->{0}->{'ADMUX'}, ADMUX[1] is $info_output_href->{1}->{'ADMUX'}\n"if ($DebugPrint == 1);
+ #print "DRAM[0] is $info_output_href->{0}->{'DRAM'}, DRAM[1] is $info_output_href->{1}->{'DRAM'}\n"if ($DebugPrint == 1);
+ #print "CommSeries[0] is $info_output_href->{0}->{'Comm. Series'}, CommSeries[1] is $info_output_href->{1}->{'Comm. Series'}\n"if ($DebugPrint == 1);
+ #print "Bank[0] is $info_output_href->{0}->{'Bank'}, Bank[1] is $info_output_href->{1}->{'Bank'}\n"if ($DebugPrint == 1);
+ #print "PBPYN[0] is $info_output_href->{0}->{'PBP'}->{'Y / N'}, PBPYN[1] is $info_output_href->{1}->{'PBP'}->{'Y / N'}\n"if ($DebugPrint == 1);
+ #print "PBPSize[0] is $info_output_href->{0}->{'PBP'}->{'Size(W)'}, PBPSize[1] is $info_output_href->{1}->{'PBP'}->{'Size(W)'}\n"if ($DebugPrint == 1);
+}
+#****************************************************************************
+# subroutine: get_common_MDL_Geo_info
+# input: $info_list_href: input list reference of list of MDL info
+# $combo_count: number of memory devices selected
+# $mem_dev_type: MEMORY_DEVICE_TYPE
+# $baseaddr: base address where the geometry list starts
+# $endaddr: end address where the geometry list ends
+# $region_info_size_href: list reference of common RegionInfo of the specified area (Size)
+# $region_info_count_href: list of common RegionInfo of the specified area (Count)
+# $bank_info_size_href: list of common BankInfo of the specified area (Size)
+# $bank_info_count_href: list of common BankInfo of the specified area (Count)
+#****************************************************************************
+sub get_common_MDL_Geo_info
+{
+ my ($info_list_href, $combo_count, $mem_dev_type, $baseaddr, $endaddr, $region_info_size_href, $region_info_count_href, $bank_info_size_href, $bank_info_count_href) = @_;
+ my ($prev_addr, $curr_addr, $idx);
+
+ ### Get common RegionInfo
+ $prev_addr = $baseaddr;
+ $curr_addr = $baseaddr;
+ $idx = 0;
+
+ while ($curr_addr < $endaddr) # traverse till the endaddr
+ {
+ ### Find the largest block/bank offset from the current address to the next boundary
+ ### Stop if the end of BankInfo or RegionInfo has been reached
+ my $largest_offset = 0; # largest offset from curr_addr to the next block/bank boundary
+ my $common_size = 0; # final(common) block/bank size of this round
+ my $size; # current offset from curr_addr to the next block/bank boundary
+ my $cur_combo_idx;
+
+ for (1..$combo_count)
+ {
+ $cur_combo_idx = $_;
+ my $cur_block_str = $info_list_href->[$_]->{1}->{'Device Geometry'}->{'Block Info.'};
+ my @cur_blocks = &split_info($cur_block_str); # list of Block Info.
+ my @cur_entire_regions = &convert_blocks_to_regions(\@cur_blocks, $endaddr); # list of Region Info. (of the entire flash)
+ my (@cur_entire_regions_size, @cur_entire_regions_count);
+ &convert_geo_hash_from_list(\@cur_entire_regions, \@cur_entire_regions_size, \@cur_entire_regions_count);
+ ### Get the offset to the next boundary
+ $size = &get_next_Geo_boundary(\@cur_entire_regions_size, \@cur_entire_regions_count, $curr_addr);
+ last if ($size == 0); # reach the end of RegionInfo/BankInfo
+ if ($size > $largest_offset)
+ {
+ $largest_offset = $size;
+ }
+ }
+ last if ($cur_combo_idx != $combo_count); # early break in for loop represents end of RegionInfo/BankInfo is reached
+
+ ### Check whether curr_address+largest_offset is still on the boundaries of all MCPs
+ for (1..$combo_count)
+ {
+ $cur_combo_idx = $_;
+ my $cur_block_str = $info_list_href->[$_]->{1}->{'Device Geometry'}->{'Block Info.'};
+ my @cur_blocks = &split_info($cur_block_str); # list of Block Info.
+ my @cur_entire_regions = &convert_blocks_to_regions(\@cur_blocks, $endaddr); # list of Region Info. (of the entire flash)
+ my (@cur_entire_regions_size, @cur_entire_regions_count);
+ &convert_geo_hash_from_list(\@cur_entire_regions, \@cur_entire_regions_size, \@cur_entire_regions_count);
+ last if (&query_if_Geo_boundary(\@cur_entire_regions_size, \@cur_entire_regions_count, $curr_addr+$largest_offset) != 1);
+ }
+ # The address is not on the boundaries of all MCPs, need to go to the next address
+ # The next address is curr_addr + largest_offset
+ if ($cur_combo_idx != $combo_count)
+ {
+ $curr_addr += $largest_offset;
+ next;
+ }
+
+ ### Add the address into the output RegionInfo/BankInfo
+ # Get the size of common block/bank size
+ $common_size = $curr_addr + $largest_offset - $prev_addr;
+ if ($prev_addr == $baseaddr) # the first entry
+ {
+ $region_info_size_href->[0] = $common_size;
+ $region_info_count_href->[0] = 1;
+ }
+ elsif ($common_size == $region_info_size_href->[$idx]) # the size is identical to the last bank we added --> count + 1
+ {
+ $region_info_count_href->[$idx]++;
+ }
+ else # tje soze os different from the last bank we added --> append new entry
+ {
+ $idx++;
+ $region_info_size_href->[$idx] = $common_size;
+ $region_info_count_href->[$idx] = 1;
+ }
+
+ ### Increment the current address and then perform the loop again
+ $curr_addr += $largest_offset;
+ $prev_addr = $curr_addr;
+ }
+ print "pass block info\n";
+ ### Get common BankInfo
+ $prev_addr = $baseaddr;
+ $curr_addr = $baseaddr;
+ $idx = 0;
+ while ($curr_addr < $endaddr) # traverse till the endaddr
+ {
+ ### Find the largest block/bank offset from the current address to the next boundary
+ ### Stop if the end of BankInfo or RegionInfo has been reached
+ my $largest_offset = 0; # largest offset from curr_addr to the next block/bank boundary
+ my $common_size = 0; # final(common) block/bank size of this round
+ my $size; # current offset from curr_addr to the next block/bank boundary
+ my $cur_combo_idx;
+
+ for (1..$combo_count)
+ {
+ $cur_combo_idx = $_;
+ my $cur_bank_str = $info_list_href->[$_]->{1}->{'Device Geometry'}->{'Bank Info.'};
+ my @cur_banks = &split_info($cur_bank_str); # list of Bank Info.
+ my (@cur_banks_size, @cur_banks_count);
+ &convert_geo_hash_from_list(\@cur_banks, \@cur_banks_size, \@cur_banks_count);
+
+ ### Get the offset to the next boundary
+ $size = &get_next_Geo_boundary(\@cur_banks_size, \@cur_banks_count, $curr_addr);
+ last if ($size == 0); # reach the end of RegionInfo/BankInfo
+ if ($size > $largest_offset)
+ {
+ $largest_offset = $size;
+ }
+ }
+ last if ($cur_combo_idx != $combo_count); # early break in for loop represents end of RegionInfo/BankInfo is reached
+
+ ### Check whether curr_address+largest_offset is still on the boundaries of all MCPs
+ for (1..$combo_count)
+ {
+ $cur_combo_idx = $_;
+ my $cur_bank_str = $info_list_href->[$_]->{1}->{'Device Geometry'}->{'Bank Info.'};
+ my @cur_banks = &split_info($cur_bank_str); # list of Bank Info.
+ my (@cur_banks_size, @cur_banks_count);
+ &convert_geo_hash_from_list(\@cur_banks, \@cur_banks_size, \@cur_banks_count);
+ last if (&query_if_Geo_boundary(\@cur_banks_size, \@cur_banks_count, $curr_addr+$largest_offset) != 1);
+ }
+ # The address is not on the boundaries of all MCPs, need to go to the next address
+ # The next address is curr_addr + largest_offset
+ if ($cur_combo_idx != $combo_count)
+ {
+ $curr_addr += $largest_offset;
+ next;
+ }
+
+ ### Add the address into the output RegionInfo/BankInfo
+ # Get the size of common block/bank size
+ $common_size = $curr_addr + $largest_offset - $prev_addr;
+
+ if ($prev_addr == $baseaddr) # the first entry
+ {
+ $bank_info_size_href->[0] = $common_size;
+ $bank_info_count_href->[0] = 1;
+ }
+ elsif ($common_size == $bank_info_size_href->[$idx]) # the size is identical to the last bank we added --> count + 1
+ {
+ $bank_info_count_href->[$idx]++;
+ }
+ else # tje soze os different from the last bank we added --> append new entry
+ {
+ $idx++;
+ $bank_info_size_href->[$idx] = $common_size;
+ $bank_info_count_href->[$idx] = 1;
+ }
+
+ ### Increment the current address and then perform the loop again
+ $curr_addr += $largest_offset;
+ $prev_addr = $curr_addr;
+ }
+}
+
+#****************************************************************************
+# subroutine: get_next_Geo_boundary
+# input: $geo_size_list_href: input list reference of geometry (Size list)
+# $geo_count_list_href: input list reference of geometry (Size list)
+# $addr: current address from which to query next boundary
+# output: $size: size from current address to the next boundary
+#****************************************************************************
+sub get_next_Geo_boundary
+{
+ my ($geo_size_list_href, $geo_count_list_href, $addr) = @_;
+ my $size;
+
+ ### for all {Size, Count} pairs
+ for (0..$#$geo_size_list_href)
+ {
+ ### Treat the address as a pile of blocks. Remove them region by region.
+ if (($geo_size_list_href->[$_]*$geo_count_list_href->[$_]) <= $addr)
+ {
+ $addr -= $geo_size_list_href->[$_]*$geo_count_list_href->[$_];
+ next;
+ }
+
+ ### Blocks that cannot fit-into one region.
+ # 1. We have found the region that addr belongs to.
+ # 2. The addr is aligned, if (addr % Size[$_]) equals 0.
+ # 3. The offset to the next boundary is (Size[$_] - (addr % Size[$_]))
+ return ($geo_size_list_href->[$_] - ($addr % $geo_size_list_href->[$_]));
+ }
+
+ return 0;
+}
+
+#****************************************************************************
+# subroutine: query_if_Geo_boundary
+# input: $geo_size_list_href: input list reference of geometry (Size list)
+# $geo_count_list_href: input list reference of geometry (Size list)
+# $addr: address to be checked whether it is on the boundary or not
+# output: $is_boundary: 1 if the queried address is on the boundary of all MCPs
+#****************************************************************************
+sub query_if_Geo_boundary
+{
+ my ($geo_size_list_href, $geo_count_list_href, $addr) = @_;
+ my $ret;
+
+ ### for all {Size, Count} pairs
+ for (0..$#$geo_size_list_href)
+ {
+ ### Treat the address as a pile of blocks. Remove them region by region.
+ if (($geo_size_list_href->[$_]*$geo_count_list_href->[$_]) <= $addr)
+ {
+ $addr -= $geo_size_list_href->[$_]*$geo_count_list_href->[$_];
+ next;
+ }
+
+ ### Blocks that cannot fit-into one region.
+ # 1. We have found the region that addr belongs to.
+ # 2. The addr is aligned, if (addr % Size[$_]) equals 0.
+ # 3. The offset to the next boundary is (Size[$_] - (addr % Size[$_]))
+ if (($addr % $geo_size_list_href->[$_]) != 0)
+ {
+ return 0;
+ }
+ }
+ return 1;
+}
+
+#****************************************************************************
+# subroutine: split_info
+# return: List of RegionInfo/BlockInfo/BankInfo
+# input: $info: Excel value to be split
+#****************************************************************************
+sub split_info
+{
+ my ($info) = @_;
+ my $ret_str;
+ my @ret_info;
+
+ if ($info eq '*')
+ {
+ push @ret_info, $info;
+ return @ret_info;
+ }
+
+ while ($info =~ /\{(0x\w+)\s*,\s*(\w+)\}/)
+ {
+ $ret_str = "{" . $1 . "," . $2 . "}";
+ push @ret_info, $ret_str;
+ $info = $';
+ }
+ return @ret_info;
+}
+
+#****************************************************************************
+# subroutine: split_sfi_driving
+# return: List of SFI driving
+# input: $driving_str: Excel value to be split
+#****************************************************************************
+sub split_sfi_driving
+{
+ my ($driving_str) = @_;
+ my @ret_driving;
+
+ $driving_str =~ s/\{//; # remove parentheses
+ $driving_str =~ s/\}//; # remove parentheses
+ $driving_str =~ s/\s+//g; # remove spaces
+ ### parse the driving string
+ my $saved_sep = $/;
+ undef $/;
+ @ret_driving = split(/\,/, $driving_str);
+ $/ = $saved_sep;
+
+ return @ret_driving;
+}
+
+#****************************************************************************
+# subroutine: split_sfi_command
+# return: List of SFI commands
+# input: $command_str: Excel value to be split
+#****************************************************************************
+sub split_sfi_command
+{
+ my ($command_str) = @_;
+ my @ret_command;
+
+ while ($command_str =~ /(\{.+\})/)
+ {
+ my $tmp_str = $1;
+ $command_str = $';
+ $tmp_str =~ s/\{//; # remove parentheses
+ $tmp_str =~ s/\}//; # remove parentheses
+ $tmp_str =~ s/\s+//g; # remove spaces
+ ### parse the driving string
+ my $saved_sep = $/;
+ undef $/;
+ my @tmp_list = split(/\,/, $tmp_str);
+ $/ = $saved_sep;
+
+ ### for commands {SPI, 0x35}, output "SPI, 1, 0x35", where 1 is the number of commands
+ if ($tmp_list[0] eq 'SPI' or $tmp_list[0] eq 'QPI')
+ {
+ push @ret_command, $tmp_list[0];
+ push @ret_command, $#tmp_list;
+ for (1..$#tmp_list)
+ {
+ push @ret_command, $tmp_list[$_];
+ }
+ }
+ else
+ {
+ &error_handler("$MEMORY_DEVICE_LIST_XLS_E: Unknown SFI commands $command_str!", __FILE__, __LINE__);
+ }
+ }
+
+ return @ret_command;
+}
+
+#****************************************************************************
+# subroutine: region_info
+# return: template of part "configure flash memory for FAT"
+#****************************************************************************
+sub region_info
+{
+ my ($region_size_href, $region_count_href, $naming, $newline) = @_;
+ my $region_info_lines;
+
+ for (0..$#$region_size_href)
+ {
+ my $tmp_size = sprintf("0x%X", $region_size_href->[$_]);
+ my $tmp_count = sprintf("%d", $region_count_href->[$_]);
+ if ($_ == $#$region_size_href)
+ {
+ $region_info_lines .= " \{$tmp_size, $tmp_count\},\n";
+ }
+ else
+ {
+ $region_info_lines .= " \{$tmp_size, $tmp_count\}, \\$newline\n";
+ }
+ }
+ chomp $region_info_lines;
+
+ if (!defined $naming)
+ {
+ return $region_info_lines;
+ }
+
+ ###
+ my $template;
+ if (defined $newline)
+ {
+ $template .= <<"__TEMPLATE";
+$region_info_lines
+__TEMPLATE
+ return $template;
+ }
+ my $naming_str = sprintf("$naming\[\]");
+ if ($naming eq 'oriRegionInfo')
+ {
+ $template .= <<"__TEMPLATE";
+FLASH_REGIONINFO_VAR_MODIFIER FlashRegionInfo $naming_str =
+{
+$region_info_lines
+ EndoriRegionInfo
+};
+__TEMPLATE
+ }
+ else
+ {
+ $template .= <<"__TEMPLATE";
+#define $naming $region_info_lines
+__TEMPLATE
+ }
+ chomp $template;
+ return $template;
+}
+
+#****************************************************************************
+# subroutine: block_info
+# return: template of part "configure flash memory for FAT"
+# input: $tmp_blocks: Block Info
+# $newline: whether there exists newline character and comments in the output Block Info string
+#****************************************************************************
+sub block_info
+{
+ my ($block_start_href, $block_size_href, $newline) = @_;
+ my $block_info_lines;
+
+ for (0..$#$block_start_href)
+ {
+ my $tmp_start = sprintf("0x%X", $block_start_href->[$_]);
+ my $tmp_size = sprintf("0x%X", $block_size_href->[$_]);
+ if ($_ == $#$block_start_href)
+ {
+ $block_info_lines .= " \{$tmp_start, $tmp_size\},\n";
+ }
+ else
+ {
+ $block_info_lines .= " \{$tmp_start, $tmp_size\}, $newline\n";
+ }
+ }
+ chomp $block_info_lines;
+
+ ###
+ my $template;
+ if (defined $newline)
+ {
+ $template .= <<"__TEMPLATE";
+$block_info_lines
+__TEMPLATE
+ }
+ else
+ {
+ $template .= <<"__TEMPLATE";
+/*
+FLASH_REGIONINFO_VAR_MODIFIER FlashBlockTBL NOTREADYYET[] =
+{
+$block_info_lines
+ EndBlockInfo
+};
+*/
+__TEMPLATE
+ }
+
+ return $template;
+}
+
+#****************************************************************************
+# subroutine: bank_info
+# return: template of part "configure flash memory for FAT"
+# input: $bank_size_href: Bank Info size
+# $bank_count_href: Bank Info count
+# $offset: the offset to start counting bank
+# $target_size: the size of the FAT
+# $newline: whether there exists newline character and comments in the output Bank Info string
+#****************************************************************************
+sub bank_info
+{
+ my ($bank_size_href, $bank_count_href, $offset, $target_size, $newline) = @_;
+ my $template;
+
+ if (defined $newline)
+ {
+ for (0..$#$bank_size_href)
+ {
+ my $tmp_size = sprintf("0x%X", $bank_size_href->[$_]);
+ my $tmp_count = sprintf("%d", $bank_count_href->[$_]);
+ if ($_ == $#$bank_size_href)
+ {
+ $template .= " \{$tmp_size, $tmp_count\},\n";
+ }
+ else
+ {
+ $template .= " \{$tmp_size, $tmp_count\}, $newline\n";
+ }
+ }
+ return $template;
+ }
+ for (0..$#$bank_size_href)
+ {
+ my $tmp_size = sprintf("0x%X", $bank_size_href->[$_]);
+ my $tmp_count = sprintf("%d", $bank_count_href->[$_]);
+
+ my $segment = ( hex($tmp_size) * $tmp_count );
+ if ($offset <= 0)
+ # Bank already in
+ {
+ if ($target_size >= $segment)
+ # Bank full in-used
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s \\ \n", hex($tmp_size), $tmp_count);
+ }
+ elsif ($target_size > 0)
+ # Bank partial used
+ {
+ my $tmp = int($target_size / hex($tmp_size));;
+ if ( int($target_size / hex($tmp_size)) > 0 )
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s\\\n", hex($tmp_size), int($target_size / hex($tmp_size)) );
+ $target_size -= hex($tmp_size) * int($target_size / hex($tmp_size));
+ }
+ if ($target_size > 0)
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s\\\n", $target_size , 1 );
+ }
+ }
+ else
+ # Bank discarded
+ {
+ }
+ $target_size -= $segment;
+ }
+ elsif ($offset < $segment)
+ # Segment cross the FAT Baseaddr
+ {
+ my $c = $tmp_count;
+ while ($offset >= hex($tmp_size))
+ {
+ $c--;
+ $offset -= hex($tmp_size);
+ }
+ # Bank partial in-used
+ if ($offset > 0 and (hex($tmp_size) - $offset) >= $target_size)
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s\\\n", $target_size, 1);
+ $target_size -= hex($tmp_size);
+ $c--;
+ }
+ elsif ($offset > 0)
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s\\\n", (hex($tmp_size) - $offset), 1);
+ $target_size -= (hex($tmp_size) - $offset);
+ $c--;
+ }
+ # discount $offset and make $offset to negative value
+ $offset -= hex($tmp_size);
+
+ next if ($c == 0); # already last one bank on the FAT boundary
+ if ($target_size >= (hex($tmp_size) * $c))
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s \\\n", hex($tmp_size), $c);
+ $target_size -= (hex($tmp_size) * $c);
+ }
+ elsif ($target_size > 0)
+ {
+ if ( int($target_size / hex($tmp_size)) > 0 )
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s \\\n", hex($tmp_size), int($target_size / hex($tmp_size)) );
+ $target_size -= hex($1) * int($target_size / hex($tmp_size));
+ }
+ if ($target_size > 0)
+ {
+ $template .= sprintf(" \{ 0x%X, %d \}, %s \\\n", $target_size , 1 );
+ }
+ }
+ }
+ # No output and down counting to reach FAT Baseaddr
+ else
+ {
+ $offset -= $segment;
+ }
+ }
+
+ $template = " {x , x},\n" if not defined $template;
+ chomp($template);
+ return $template;
+}
+
+#****************************************************************************
+# subroutine: convert_blocks_to_regions
+# return: RegionInfo of the entire flash, in {size, count} format instead of {start, size} format
+# input: $tmp_blocks: input list of blocks
+# output: @regions: output list of regions
+#****************************************************************************
+sub convert_blocks_to_regions
+{
+ my ($tmp_blocks, $endaddr) = @_;
+ my @regions;
+ my ($cur_reg_start, $cur_block_size, $prev_reg_start, $prev_block_size);
+
+ for (0..$#$tmp_blocks)
+ {
+ if ($tmp_blocks->[$_] =~ /\{(\w+)\s*,\s*(\w+)\}/) # match {0x20000, 7}
+ {
+ $cur_reg_start = hex($1);
+ $cur_block_size = hex($2);
+ }
+ if ($_ > 0)
+ {
+ if ($tmp_blocks->[$_-1] =~ /\{(\w+)\s*,\s*(\w+)\}/) # match {0x20000, 7}
+ {
+ $prev_reg_start = hex($1);
+ $prev_block_size = hex($2);
+ }
+ my $tmp_region_info_line = sprintf("\{0x%X,%d\}", $prev_block_size, ($cur_reg_start-$prev_reg_start)/$prev_block_size);
+ push @regions, $tmp_region_info_line;
+ }
+ }
+ my $tmp_region_info_line;
+ if ($#$tmp_blocks >= 0)
+ {
+ $tmp_region_info_line = sprintf("\{0x%X,%d\}", $cur_block_size, ($endaddr-$cur_reg_start)/$cur_block_size);
+ }
+ push @regions, $tmp_region_info_line;
+
+ return @regions;
+}
+
+#****************************************************************************
+# subroutine: convert_regions_to_blocks
+# return: BlockInfo of the input RegionInfo, in {start, size} format instead of {size, count} format
+# input: $regions_start: start address of region info
+# $tmp_regions_size_list: input list of regions size
+# $tmp_regions_count_list: input list of regions count
+# output: $output_blocks_start_list: output list of blocks start
+# $output_blocks_size_list: output list of blocks size
+#****************************************************************************
+sub convert_regions_to_blocks
+{
+ my ($regions_start, $tmp_regions_size_list, $tmp_regions_count_list, $output_blocks_start_list, $output_blocks_size_list) = @_;
+ my @ret_blocks;
+
+ my $idx = 0;
+ $output_blocks_start_list->[0] = $regions_start;
+ for (0..$#$tmp_regions_size_list)
+ {
+ $idx = $_;
+ # the block size is identical to the region block size
+ $output_blocks_size_list->[$_] = $tmp_regions_size_list->[$_];
+ # the offset equals to the accumulated size of former regions
+ if ($_ != $#$tmp_regions_size_list)
+ {
+ $output_blocks_start_list->[$_+1] = $output_blocks_start_list->[$_] + ($tmp_regions_size_list->[$_]*$tmp_regions_count_list->[$_]);
+ }
+ }
+}
+
+#****************************************************************************
+# subroutine: convert_geo_hash_from_list
+# return: lists of flash geometry in {size, count} format
+# input: $list_href: input list of blocks/banks
+# $geo_size_list_output_href: Size part of flash geometry pairs
+# $geo_count_list_output_href: Count part of flash geometry pairs
+#****************************************************************************
+sub convert_geo_hash_from_list
+{
+ my ($list_href, $geo_size_list_output_href, $geo_count_list_output_href) = @_;
+
+ for (0..$#$list_href)
+ {
+ if ($list_href->[$_] =~ /\{(\w+)\s*,\s*(\w+)\}/) # match {0x20000, 7}
+ {
+ $geo_size_list_output_href->[$_] = hex($1);
+ $geo_count_list_output_href->[$_] = $2;
+ }
+ }
+}
+
+
+#****************************************************************************
+# subroutine: SCHEME Configure Routines :: Query Flash Block Size
+# input: Flash Offset Address
+# Output: Flash block size
+#****************************************************************************
+sub config_query_flash_block_sz
+{
+ my ($offset, $COMM_MDL_INFO_LOCAL, $ENTIRE_BLOCK_INFO_START_LIST_LOCAL, $ENTIRE_BLOCK_INFO_SIZE_LIST_LOCAL) = @_;
+
+ &error_handler("pcore\\tools\\emigenflash.pl: Query Block Size at $offset larger than available size!", __FILE__, __LINE__) if ($offset > $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+
+ for (0..$#$ENTIRE_BLOCK_INFO_START_LIST_LOCAL)
+ {
+ return ($ENTIRE_BLOCK_INFO_SIZE_LIST_LOCAL->[$#$ENTIRE_BLOCK_INFO_START_LIST_LOCAL-$_]) if ($offset >= $ENTIRE_BLOCK_INFO_START_LIST_LOCAL->[$#$ENTIRE_BLOCK_INFO_START_LIST_LOCAL-$_]);
+ }
+ &error_handler("pcore\\tools\\emigenflash.pl: Unreachable!", __FILE__, __LINE__);
+}
+
+#****************************************************************************
+# subroutine: flash_opt_h_file_body
+# return: flash opt header file
+#****************************************************************************
+sub flash_opt_gen_h_file_body
+{
+ my ($MAKEFILE_OPTIONS_LOCAL, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $MDL_INFO_LIST_LOCAL, $COMM_MDL_INFO_LOCAL, $CUSTOM_MEMORY_DEVICE_HDR_LOCAL, $THEMF_LOCAL, $entire_bank_info_size_list_LOCAL, $entire_bank_info_count_list_LOCAL, $entire_block_info_start_list_LOCAL, $entire_block_info_size_list_LOCAL, $entire_region_info_size_list_LOCAL, $entire_region_info_count_list_LOCAL) = @_;
+ my $current_nor_opt;
+ ##if (($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} ne 'LPSDRAM') and ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} ne 'LPDDR') and ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} ne 'LPDDR2'))
+ #if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} eq 'LPDDR2')
+ #if($MAKEFILE_OPTIONS_LOCAL->{'platform'} eq 'MT6290')
+ #{
+ if ($COMM_MDL_INFO_LOCAL->{0}->{'PBP'}->{'Y / N'} =~ /Y/i)
+ {
+ $current_nor_opt .= "#define __PAGE_BUFFER_PROGRAM__\n";
+ }
+
+ #if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} eq 'SERIAL_FLASH')
+ if ($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ $current_nor_opt .= "#define __SERIAL_FLASH__\n";
+ }
+
+ ### Define flash types
+ my $cnt_sibley = 0;
+ for (1..$CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT})
+ {
+ if ($MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Comm. Series'} =~ /(\w*)/i)
+ {
+ my $tmp_series = $1;
+ if ($current_nor_opt =~ /$tmp_series/)
+ {
+ }
+ else
+ {
+ #if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} eq 'SERIAL_FLASH')
+ if ($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ $current_nor_opt .= "#define SF_DAL_" . $tmp_series . "\n";
+ }
+ else
+ {
+ $current_nor_opt .= "#define NOR_FLASH_TYPE_" . $tmp_series . "\n";
+ if ($tmp_series eq 'INTEL_SIBLEY')
+ {
+ $cnt_sibley++;
+ }
+ }
+ }
+ }
+ }
+ if ($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ if ($cnt_sibley != $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT})
+ {
+ $current_nor_opt .= "#define __NON_INTEL_SIBLEY__\n";
+ }
+
+
+ $current_nor_opt .= "\n";
+ $current_nor_opt .= "\n";
+
+ if ($COMM_MDL_INFO_LOCAL->{0}->{'Bank'} =~ /M/i)
+ {
+ $current_nor_opt .= "#define __MULTI_BANK_NOR_DEVICE__\n";
+ }
+ elsif ($COMM_MDL_INFO_LOCAL->{0}->{'Bank'} =~ /S/i)
+ {
+ $current_nor_opt .= "#define __SINGLE_BANK_NOR_DEVICE__\n";
+ }
+ }
+ #}
+
+ if (($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'FALSE') and ($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'FALSE'))
+ {
+ $current_nor_opt .= "#define __SMART_PHONE_PLATFORM__\n";##for Not Run CkSysDrv.pl, will check FAT valid, but no flash now
+ }
+
+ ###
+ my $pbp_size = ($COMM_MDL_INFO_LOCAL->{0}->{'PBP'}->{'Y / N'} =~ /Y/i)
+ ? $COMM_MDL_INFO_LOCAL->{0}->{'PBP'}->{'Size(W)'}
+ : 0;
+
+ ###
+ my $nor_block_size_str = sprintf("0x%X", $nor_block_size);
+
+ ###
+ my $nand_total_size = 0;
+ my $nand_block_size = 0;
+
+ #if($MAKEFILE_OPTIONS_LOCAL->{'platform'} eq 'MT6290')
+ #{
+ if ($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE')
+ {
+ $nand_total_size = ($COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'} == 0xffffffff)
+ ? 0
+ : ($COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'} / (1024*1024));
+ $nand_block_size = $COMM_MDL_INFO_LOCAL->{0}->{'NAND Block Size(KB)'};
+ }
+ #}
+
+ my $base_addr_string = sprintf("0x%08X", $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Base'});
+ my $fat_space_string = sprintf("0x%08X", $COMM_MDL_INFO_LOCAL->{0}->{'Default FAT Size'});
+
+ ###
+ my $fota_check;
+ if ($MAKEFILE_OPTIONS_LOCAL->{'fota_enable'} eq 'FOTA_DM')
+ {
+ $fota_check = <<"__TEMPLATE";
+#ifndef __FOTA_DM__
+ #error "$THEMF: Error! FOTA_ENABLE should be set to FOTA_DM!"
+#endif /* __FOTA_DM__ */
+__TEMPLATE
+ }
+ else
+ {
+ $fota_check = <<"__TEMPLATE";
+#ifdef __FOTA_DM__
+ #error "$THEMF_LOCAL: Error! FOTA_ENABLE should not be defined!"
+#endif /* __FOTA_DM__ */
+__TEMPLATE
+ }
+
+ ###
+ my ($fota_nor_region_def, $fota_nor_block_def, $fota_nor_bank_def);
+ if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} eq 'NOR_RAM_MCP')
+ {
+ $fota_nor_region_def = ®ion_info($entire_region_info_size_list_LOCAL, $entire_region_info_count_list_LOCAL, undef, '\\');
+ $fota_nor_block_def = &block_info($entire_block_info_start_list_LOCAL, $entire_block_info_size_list_LOCAL, '\\');
+ $fota_nor_bank_def = &bank_info($entire_bank_info_size_list_LOCAL, $entire_bank_info_count_list_LOCAL, 0, $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'}, '\\');
+ }
+
+ ###
+ my $template = <<"__TEMPLATE";
+
+/*
+ *******************************************************************************
+ PART 1:
+ FLASH CONFIG Options Definition here
+ *******************************************************************************
+*/
+$current_nor_opt
+
+/*
+ *******************************************************************************
+ PART 2:
+ FLASH FDM FEATURE CONFIG PARAMETERS translated from Manual custom_Memorydevice.h
+ *******************************************************************************
+*/
+
+#define BUFFER_PROGRAM_ITERATION_LENGTH ($pbp_size)
+
+/*
+ *******************************************************************************
+ PART 3:
+ FLASH GEOMETRY translated from MEMORY DEVICE DATABASE
+ *******************************************************************************
+*/
+
+/* NOR flash maximum block size (Byte) in file system region */
+#define NOR_BLOCK_SIZE $nor_block_size_str
+
+/* NAND flash total size (MB). PLEASE configure it as 0 if it is unknown. */
+#define NAND_TOTAL_SIZE $nand_total_size
+
+/* NAND flash block size (KB). PLEASE configure it as 0 if it is unknown. */
+#define NAND_BLOCK_SIZE $nand_block_size
+
+/*
+ *******************************************************************************
+ PART 4:
+ FLASH FAT CONFIG translated from Manual custom_Memorydevice.h
+ *******************************************************************************
+*/
+
+ #define NOR_FLASH_BASE_ADDRESS_DEFAULT ($base_addr_string)
+ #define NOR_ALLOCATED_FAT_SPACE_DEFAULT ($fat_space_string)
+ #define FOTA_DM_FS_OFFSET $nfb_fat_size_offset
+ #define FOTA_DM_FS_SECTOR_OFFSET $nfb_partition_sector_offset
+
+/*
+ *******************************************************************************
+ PART 6:
+ FOTA UPDATABLE FLASH AREA
+ *******************************************************************************
+*/
+
+$fota_check
+
+#define CONFIG_FOTA_NOR_REGION_DEF \\
+$fota_nor_region_def
+
+#define CONFIG_FOTA_NOR_BLOCK_DEF \\
+$fota_nor_block_def
+
+#define CONFIG_FOTA_NOR_BANK_DEF \\
+$fota_nor_bank_def
+
+__TEMPLATE
+
+ return $template;
+}
+
+#****************************************************************************
+# subroutine: combo_flash_config_h_file_body
+# return:
+#****************************************************************************
+sub combo_flash_config_h_file_body
+{
+ my ($MAKEFILE_OPTIONS_LOCAL, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $MDL_INFO_LIST_LOCAL, $COMM_MDL_INFO_LOCAL) = @_;
+ ### There should be totally 8 BlockInfo and BankInfo
+ my $MAX_BLOCK_INFO = 8;
+ my $MAX_BANK_INFO = 8;
+
+ ### Fill-in the information of each memory
+ my $combo_mem_info_struct;
+ for (1..$CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT})
+ {
+ my $comma;
+ my $cmem_fdm_type;
+ my $pbp_size;
+ my $cur_block_str;
+ my @cur_blocks;
+ my $cur_bank_str;
+ my @cur_banks;
+ my $cur_uni_block_str;
+ my $cur_uni_block;
+ my ($block_info_template, $bank_info_template);
+ #if($MAKEFILE_OPTIONS_LOCAL->{'platform'} eq 'MT6290')
+ #{
+ if ($CUSTOM_MEM_DEV_OPTIONS_LOCAL->{MEMORY_DEVICE_TYPE} eq 'NAND_RAM_MCP')##MT6290 MCP
+ {
+ #todo
+ }
+ else ##MT6290 Discrete DRAM/FLASH
+ {
+ if ($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ #print "Serial Flash Support!\n"if ($DebugPrint == 1);
+ $comma = ($_ < $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT}) ? "," : "";
+ $cmem_fdm_type = 'CMEM_FDM_NOR_DEFAULT';
+ $pbp_size = 0;
+ if ($MDL_INFO_LIST_LOCAL->[$_]->{1}->{'PBP'}->{'Y / N'} =~ /Y/i)
+ {
+ $pbp_size = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'PBP'}->{'Size (Byte)'};
+ }
+ $cur_block_str = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Device Geometry'}->{'Block Info.'};
+ @cur_blocks = &split_info($cur_block_str); # list of Block Info.
+ $cur_bank_str = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Device Geometry'}->{'Bank Info.'};
+ @cur_banks = &split_info($cur_bank_str); # list of Bank Info.
+ $cur_uni_block_str = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Device Geometry'}->{'Uniform Block (KB)'};
+ $cur_uni_block = &split_info_for_UB($cur_uni_block_str);
+ }
+ else #if ($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE'), No flash or NAND gen dummy file
+ {
+ #print "NAND Flash Gen Dummy!\n"if ($DebugPrint == 1);
+ #$comma = 0;
+ $comma = ($_ < $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT}) ? "," : "";
+ $cmem_fdm_type = '';
+ $pbp_size = 0;
+ $cur_block_str = '';
+ @cur_blocks = &split_info($cur_block_str); # list of Block Info.
+ $cur_bank_str = '';
+ @cur_banks = &split_info($cur_bank_str); # list of Bank Info.
+ $cur_uni_block_str = '';
+ $cur_uni_block = &split_info_for_UB($cur_uni_block_str);
+ }
+ }
+ #}
+
+ for (0..($MAX_BLOCK_INFO-1))
+ {
+ $block_info_template .= " ";
+ if (defined $cur_blocks[$_])
+ {
+ $block_info_template .= $cur_blocks[$_];
+ }
+ else
+ {
+ $block_info_template .= "EndRegionInfo";
+ }
+ if ($_ != ($MAX_BLOCK_INFO-1))
+ {
+ $block_info_template .= ",\n";
+ }
+ }
+ for (0..($MAX_BANK_INFO-1))
+ {
+ $bank_info_template .= " ";
+ if (defined $cur_banks[$_])
+ {
+ $bank_info_template .= $cur_banks[$_];
+ }
+ else
+ {
+ $bank_info_template .= "EndBankInfo";
+ }
+ if ($_ != ($MAX_BANK_INFO-1))
+ {
+ $bank_info_template .= ",\n";
+ }
+ }
+
+ $combo_mem_info_struct .= <<"__TEMPLATE";
+ { // $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Part Number'}
+ $cmem_fdm_type,
+ $pbp_size, // Page Buffer Program Size
+ $cur_uni_block, // Unifom Blocks
+ { // BlockInfo Start
+$block_info_template
+ }, // BlockInfo End
+ { // BankInfo Start
+$bank_info_template
+ } // BankInfo End
+ }$comma
+__TEMPLATE
+ }
+
+ ###
+ my $template = <<"__TEMPLATE";
+#define CMEM_MAX_BLOCKS $cmem_max_blocks
+#define CMEM_MAX_SECTORS $cmem_max_sectors
+
+COMBO_MEM_TYPE_MODIFIER COMBO_MEM_TYPE_NAME COMBO_MEM_INST_NAME = {
+ COMBO_MEM_STRUCT_HEAD
+$combo_mem_info_struct
+ COMBO_MEM_STRUCT_FOOT
+};
+__TEMPLATE
+}
+
+
+#****************************************************************************
+# subroutine: combo_nfi_config_h_file_body
+# return:
+#****************************************************************************
+sub combo_nfi_config_h_file_body
+{
+ my ($MAKEFILE_OPTIONS_LOCAL, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $MDL_INFO_LIST_LOCAL, $COMM_MDL_INFO_LOCAL) = @_;
+
+ ### Fill-in the information of each memory
+ my $combo_nfi_info_struct;
+ ### There should be totally 8 Flash ID entries
+ my $MAX_FLASH_ID = 8;
+
+ for (1..$CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT})
+ {
+ $combo_nfi_info_struct .= "/* $_ */\n";
+ my $vendor = uc($MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Vendor'});
+ #$combo_nfi_info_struct .= " {\n" ." {" . "\"$vendor $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Part Number'}\"" ."}, // DevName_str (64 bytes)\n";#part time number
+ $combo_nfi_info_struct .= " {\n" ." 0x00000301,\n" ." {" . "\"$vendor $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Part Number'}\"" ."}, // NFI_Device_Name (64 bytes)\n";#part time number
+
+ ###get flash id string
+ my $flash_id_str = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Flash ID'};
+
+ $flash_id_str =~ s/\{//; # remove parentheses
+ $flash_id_str =~ s/\}//; # remove parentheses
+ $flash_id_str =~ s/\s+//g; # remove spaces
+ ### parse the flash id string
+ my $saved_sep = $/;
+ undef $/;
+ my @flash_id = split(/\,/, $flash_id_str);
+ $/ = $saved_sep;
+ my $flash_id_cnt = $#flash_id + 1;
+
+ my $flash_id_template;
+ my $flash_id_mask;
+ #$flash_id_template .= sprintf("0x%02X", hex($flash_id[$_])) .",";
+ #$flash_id_mask .= "0xFF" .",";
+ for (0..($MAX_FLASH_ID-1))
+ {
+ if (defined $flash_id[$_])
+ {
+ $flash_id_template .= sprintf("0x%02X", hex($flash_id[$_]));
+ $flash_id_mask .= "0xFF";
+ }
+ else
+ {
+ $flash_id_template .= "0xFF";
+ $flash_id_mask .= "0x00";
+ }
+
+ if ($_ != ($MAX_FLASH_ID-1))
+ {
+ $flash_id_template .= ", ";
+ $flash_id_mask .= ", ";
+ }
+ }
+ $combo_nfi_info_struct .= " {" .$flash_id_template ."}, // ID_info\n";
+ $combo_nfi_info_struct .= " {" .$flash_id_mask ."}, // ID_valid_mask\n";
+
+ #$combo_nfi_info_struct .= " " .$MDL_INFO_LIST_LOCAL->[$_]->{1}->{'NAND Size(MB)'} .", // deviceSize (MByte)\n";
+ $combo_nfi_info_struct .= " " .$MDL_INFO_LIST_LOCAL->[$_]->{1}->{'NAND Size(MB)'} .", // NFI_Device_Size (MByte)\n";
+
+ #$combo_nfi_info_struct .= " " .sprintf("0x%05x", $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'NAND Block Size(KB)'}*1024) .", // blockSize (byte)\n";
+ $combo_nfi_info_struct .= " " .sprintf("0x%05x", $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'NAND Block Size(KB)'}*1024) .", // NFI_Block_Size (byte)\n";
+
+ ###Parsing special info
+ my $nand_flash_key_ref = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{$MAKEFILE_OPTIONS_LOCAL->{'platform'}};
+
+ foreach my $nand_flash_key (sort keys %{$nand_flash_key_ref})
+ {
+ #print "1-1 $nand_flash_key\n"if ($DebugPrint == 1);
+ if ($nand_flash_key =~ /(\d+)MHz NFIC Config/)
+ {
+ my $nand_flash_cfg = $nand_flash_key;
+ foreach my $nand_flash_key (sort keys %{$nand_flash_key_ref->{$nand_flash_cfg}})
+ {
+ my $val = $nand_flash_key_ref->{$nand_flash_cfg}->{$nand_flash_key};
+ if (($val ne 'x') && ($val ne 'X') && ($val ne ''))
+ {
+ $combo_nfi_info_struct .=" " .$val .", // $nand_flash_key" . "\n";
+ }
+ }
+ }
+ else
+ {
+ my $val = $nand_flash_key_ref->{$nand_flash_key};
+ #print "1-2 $val\n"if ($DebugPrint == 1);
+ if (($val ne 'x') && ($val ne 'X') && ($val ne ''))
+ {
+ $combo_nfi_info_struct .= " " .$val .", // $nand_flash_key" . "\n";
+ }
+ }
+ }
+
+ if($_ != $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT})
+ {
+ $combo_nfi_info_struct .= " },\n";
+ }
+ else
+ {
+ $combo_nfi_info_struct .= " }\n";
+ }
+__TEMPLATE
+ }
+
+ ###
+ my $template = <<"__TEMPLATE";
+#define COMBO_NAND_FLASH_NUM $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT}
+const combo_nand_flash_list_v01 COMBO_NAND_Table[] =
+{
+$combo_nfi_info_struct
+};
+__TEMPLATE
+
+ return $template;
+}
+
+#****************************************************************************
+# subroutine: combo_flash_id_h_file_body
+# return:
+#****************************************************************************
+sub combo_flash_id_h_file_body
+{
+ my ($MAKEFILE_OPTIONS_LOCAL, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $MDL_INFO_LIST_LOCAL, $COMM_MDL_INFO_LOCAL) = @_;
+ ### There should be totally 8 Flash ID entries
+ my $MAX_FLASH_ID = 8;
+
+ ### Fill-in the information of each memory
+ my $combo_mem_info_struct;
+ for (1..$CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT})
+ {
+ my $comma = ($_ < $CUSTOM_MEM_DEV_OPTIONS_LOCAL->{COMBO_MEM_ENTRY_COUNT}) ? "," : "";
+ my $cmem_type;
+
+ if ($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE')
+ {
+ $cmem_type = "CMEM_TYPE_NAND";
+ }
+ elsif ($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ $cmem_type = "CMEM_TYPE_SERIAL_NOR_FLASH";
+ }
+ else
+ {
+ print "No flash support!\n"if ($DebugPrint == 1);
+ }
+
+ ###get nand page size
+ my $nand_page_size = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'NAND Page size(B)'};
+ my $nand_block_size = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'NAND Block Size(KB)'};
+ $nand_page_size = $nand_page_size . "," . $nand_block_size;
+
+ ###get flash id string
+ my $flash_id_str = $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Flash ID'};
+
+ $flash_id_str =~ s/\{//; # remove parentheses
+ $flash_id_str =~ s/\}//; # remove parentheses
+ $flash_id_str =~ s/\s+//g; # remove spaces
+ ### parse the flash id string
+ my $saved_sep = $/;
+ undef $/;
+ my @flash_id = split(/\,/, $flash_id_str);
+ $/ = $saved_sep;
+ my $flash_id_cnt = $#flash_id + 1;
+
+ my $flash_id_template;
+ for (0..($MAX_FLASH_ID-1))
+ {
+ if (defined $flash_id[$_])
+ {
+ ##$flash_id_template .= $flash_id[$_];
+ if ($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE')
+ {
+ $flash_id_template .= sprintf("0x%04X", hex($flash_id[$_]));
+ #print "$_: $flash_id_template\n"if ($DebugPrint == 1);
+ }
+ elsif($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ $flash_id_template .= sprintf("0x%02X", hex($flash_id[$_]));
+ }
+ }
+ else
+ {
+ if ($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE')
+ {
+ $flash_id_template .= "0x0000";
+ }
+ elsif($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ $flash_id_template .= "0x00";
+ }
+ }
+ if ($_ != ($MAX_FLASH_ID-1))
+ {
+ $flash_id_template .= ", ";
+ }
+ }
+
+ $combo_mem_info_struct .= <<"__TEMPLATE";
+ { // $MDL_INFO_LIST_LOCAL->[$_]->{1}->{'Part Number'}
+ $cmem_type,
+ $flash_id_cnt, // Valid ID length
+ {$flash_id_template} // Flash ID
+ }$comma
+__TEMPLATE
+ }
+
+ ###
+ my $template = <<"__TEMPLATE";
+COMBO_MEM_TYPE_MODIFIER COMBO_MEM_TYPE_NAME COMBO_MEM_INST_NAME = {
+ COMBO_MEM_STRUCT_HEAD
+$combo_mem_info_struct
+ COMBO_MEM_STRUCT_FOOT
+};
+__TEMPLATE
+}
+
+#****************************************************************************
+# subroutine: custom_flash_c_file_body
+# return:
+#****************************************************************************
+sub custom_flash_h_file_body
+{
+ my ($MAKEFILE_OPTIONS_LOCAL, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $MDL_INFO_LIST_LOCAL, $COMM_MDL_INFO_LOCAL, $MCP_LIST_LOCAL, $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL,$LPSDRAM_CHIP_SELECT_LOCAL, $CUSTOM_MEMORY_DEVICE_HDR_LOCAL, $nor_size_Mb_LOCAL, $entire_bank_info_size_list_LOCAL, $entire_bank_info_count_list_LOCAL, $entire_block_info_start_list_LOCAL, $entire_block_info_size_list_LOCAL, $fs_region_info_size_list_LOCAL, $fs_region_info_count_list_LOCAL, $entire_region_info_size_list_LOCAL, $entire_region_info_count_list_LOCAL) = @_;
+ my $cs1_base_address = 0;
+ my $flash_limit = 0;
+ my $flash_size = 0;
+ if($MAKEFILE_OPTIONS_LOCAL->{'platform'} eq 'MT6290')
+ {
+ my $SPI_Base = 0xA0000000;
+ $cs1_base_address = sprintf("0x%08X", $SPI_Base);#MT6290 Flash Memory Base Address
+ $flash_limit = sprintf("0x%08X", $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+ $flash_size = sprintf("0x%08X", $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+ #print "MT6290: $cs1_base_address, $flash_limit, $flash_size\n"if ($DebugPrint == 1);
+
+ if($MAKEFILE_OPTIONS_LOCAL->{'nand_support'} eq 'TRUE')
+ {
+ ##MT6290 Work aroud for SDS, when in HOSTED/ROUTER Project, NOR_FLASH_SIZE is MD End(96MB), other Projects is Flash Size
+ if((($MAKEFILE_OPTIONS_LOCAL->{'smart_phone_core'} eq 'ANDROID_MODEM') and ($MAKEFILE_OPTIONS_LOCAL->{'ccci_fs_support'} eq 'FALSE')) or (($MAKEFILE_OPTIONS_LOCAL->{'modem_card'} eq 'FULL') and ($MAKEFILE_OPTIONS_LOCAL->{'smart_phone_core'} eq 'MODEM_HOST')))
+ #if($MAKEFILE_OPTIONS_LOCAL->{'modem_card'} eq 'FULL')
+ {
+ my $MDFlashEnd = 96*1024*1024;
+ $flash_size = sprintf("0x%08X", $MDFlashEnd);
+ }
+ }
+ }
+
+ ###
+ my $pbp_size = ($COMM_MDL_INFO_LOCAL->{0}->{'PBP'}->{'Y / N'} =~ /Y/i)
+ ? $COMM_MDL_INFO_LOCAL->{0}->{'PBP'}->{'Size(W)'}
+ : 0;
+
+ ###
+ my $bank_info_string = &bank_info( $entire_bank_info_size_list_LOCAL, $entire_bank_info_count_list_LOCAL, $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL );
+
+ ###
+ my $sub_content_block1 = ®ion_info($fs_region_info_size_list_LOCAL, $fs_region_info_count_list_LOCAL, 'REGION_INFO_LAYOUT');
+ my $sub_content_block2 = &block_info($entire_block_info_start_list_LOCAL, $entire_block_info_size_list_LOCAL);
+ my $sub_content_block3;
+ my $sub_content_block4;
+ #if($MAKEFILE_OPTIONS_LOCAL->{'platform'} eq 'MT6290')
+ #{
+ my $ori_bank_info = &bank_info($entire_bank_info_size_list_LOCAL, $entire_bank_info_count_list_LOCAL, 0, $COMM_MDL_INFO_LOCAL->{0}->{'Flash Size'});
+ ### ? what is the purpose?
+ $sub_content_block3 = ®ion_info($fs_region_info_size_list_LOCAL, $fs_region_info_count_list_LOCAL, 'oriRegionInfo');
+ $sub_content_block4 .= <<"__TEMPLATE";
+
+static NORBankInfo oriBankInfo[] =
+{
+$ori_bank_info
+ EndBankInfo
+};
+
+__TEMPLATE
+ chomp $sub_content_block4;
+ #}
+
+ ###
+ my $region_info_disk0 = ®ion_info($fs_region_info_size_list_LOCAL, $fs_region_info_count_list_LOCAL, 'DISK0_REGION_INFO_LAYOUT');
+ my $region_info_disk1 = ®ion_info($fs_region_info_size_list_LOCAL, $fs_region_info_count_list_LOCAL, 'DISK1_REGION_INFO_LAYOUT');
+ my $region_info_entire = ®ion_info($entire_region_info_size_list_LOCAL, $entire_region_info_count_list_LOCAL, 'ENTIRE_DISK_REGION_INFO_LAYOUT');
+
+ ###
+ my $template1;
+
+ $template1 .= <<"__TEMPLATE__";
+/*******************************************************************************
+ NOTICE: Fill the flash region information table, a region is the memory space
+ that contains continuous sectors of equal size. Each region element
+ in the table is the format as below:
+ {S_sector, N_sector},
+ S_sector: the size of sector in the region
+ N_sector: the number of sectors in the region
+ *******************************************************************************/
+$sub_content_block1
+
+$region_info_disk0
+
+$region_info_disk1
+
+$region_info_entire
+
+/*******************************************************************************
+ NOTICE. Modify the value of TOTAL_BLOCKS, which is the sum of the number of
+ sectors in all regions.
+ Note : The Maximum value of TOTAL_BLOCKS is (127).
+ *******************************************************************************/
+#define TOTAL_BLOCKS $cmem_max_blocks
+
+/*******************************************************************************
+ NOTICE. Modify the value of page buffer size in WORD for page buffer program
+ *******************************************************************************/
+//kal_uint32 PAGE_BUFFER_SIZE = $pbp_size;
+
+#define BANK_INFO_LAYOUT $bank_info_string
+
+/*******************************************************************************
+ NOTICE. NOR FLASH BLOCKS SIZE LOOKUP TABLE
+ Each entry element
+ {Offset, Block_Size},
+ Offset: the offset address
+ Block_Size: the size of block
+ *******************************************************************************/
+$sub_content_block2
+__TEMPLATE__
+
+ ###
+ my $flash_id_str;
+ #if($MAKEFILE_OPTIONS_LOCAL->{'platform'} eq 'MT6290')
+ #{
+ #print "Flash ID: $MDL_INFO_LIST_LOCAL->[1]->{1}->{'Flash ID'}!\n"if ($DebugPrint == 1);
+ $flash_id_str .= <<"__TEMPLATE__";
+const kal_char FLASH_ID[] = "$MDL_INFO_LIST_LOCAL->[1]->{1}->{'Flash ID'}";
+__TEMPLATE__
+ #}
+ chomp $flash_id_str;
+
+ ###
+ my ($cs0_info, $cs1_info);
+ my ($pn0_str, $pn1_str);
+ if ((!defined $MAKEFILE_OPTIONS_LOCAL->{'combo_memory_support'}) or ($MAKEFILE_OPTIONS_LOCAL->{'combo_memory_support'} eq 'FALSE'))
+ {
+ if (defined $MCP_LIST_LOCAL->[1]->{0})
+ {
+ $cs0_info .= <<"__TEMPLATE__";
+ * CS0_PART_NUMBER: $MCP_LIST_LOCAL->[1]->{0}
+__TEMPLATE__
+ chomp $cs0_info;
+
+ $pn0_str .= <<"__TEMPLATE__";
+const kal_char PART_NUMBER_0[] = "$MCP_LIST_LOCAL->[1]->{0}";
+__TEMPLATE__
+ chomp $pn0_str;
+ }
+ if (defined $MCP_LIST_LOCAL->[1]->{1})
+ {
+ $cs1_info .= <<"__TEMPLATE__";
+ * CS1_PART_NUMBER: $MCP_LIST_LOCAL->[1]->{1}
+__TEMPLATE__
+ chomp $cs1_info;
+
+ $pn1_str .= <<"__TEMPLATE__";
+const kal_char PART_NUMBER_1[] = "$MCP_LIST_LOCAL->[1]->{1}";
+__TEMPLATE__
+ chomp $pn1_str;
+ }
+ }
+
+ ###
+ my $flash_density;
+ if ($MAKEFILE_OPTIONS_LOCAL->{'serial_flash_support'} eq 'TRUE')
+ {
+ $flash_density .= <<"__TEMPLATE__";
+ * NOR_FLASH_DENSITY: $flash_limit
+ * NOR_FLASH_SIZE(Mb): $nor_size_Mb_LOCAL
+__TEMPLATE__
+ chomp $flash_density;
+ }
+
+ ###
+ my $template = <<"__TEMPLATE";
+
+#define NOR_FLASH_BASE_ADDR $cs1_base_address
+/*
+#ifdef REMAPPING
+#define NOR_FLASH_BASE_ADDR $cs1_base_address
+#define RAM_BASE_ADDR 0x00000000
+#else
+#define NOR_FLASH_BASE_ADDR 0x00000000
+#define RAM_BASE_ADDR $cs1_base_address
+#endif
+*/
+
+/*
+ ****************************************************************************
+ PART 2:
+ Essential Information of NOR Flash Geometry Layout Information
+ ****************************************************************************
+*/
+$template1
+
+#define NOR_FLASH_SIZE $flash_size
+
+$flash_id_str
+
+/****************************************************
+ * This part is for auto-gen validity CHECK *
+ * Don't modify any content in this comment section *
+$cs0_info
+$cs1_info
+$flash_density
+
+$sub_content_block3
+
+$sub_content_block4
+ ****************************************************/
+
+__TEMPLATE
+}
+
+#****************************************************************************
+# subroutine: custom_flash_norfdm5_c_file_body
+# return:
+#****************************************************************************
+sub custom_flash_norfdm5_h_file_body
+{
+ my ($MAKEFILE_OPTIONS_LOCAL, $CUSTOM_MEM_DEV_OPTIONS_LOCAL, $MDL_INFO_LIST_LOCAL, $COMM_MDL_INFO_LOCAL, $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL, $entire_bank_info_size_list_LOCAL, $entire_bank_info_count_list_LOCAL) = @_;
+ my $bank_info_string = &bank_info( $entire_bank_info_size_list_LOCAL, $entire_bank_info_count_list_LOCAL, $NOR_FLASH_BASE_ADDRESS_VAL_LOCAL, $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL );
+
+ ###
+ my $nor_total_lsmt = 1;
+ my $count = 0;
+ my $sum = 1;
+ my $tmp_regions_sum = $NOR_ALLOCATED_FAT_SPACE_VAL_LOCAL;
+
+ if ($MEM_DEV_LIST_INFO{0}->{'Comm. Series'} eq 'INTEL_SIBLEY')
+ {
+ if ($tmp_regions_sum > (64*1024*1024))
+ {
+ my $count = 0;
+ my $sum = 1;
+ $tmp_regions_sum /= 1024;
+ while ($sum < $tmp_regions_sum)
+ {
+ $sum *= 2;
+ $count++;
+ }
+ $count -= 8;
+ for (my $i=0; $i<$count; $i++)
+ {
+ $nor_total_lsmt *= 2;
+ }
+ }
+ else
+ {
+ my $count = 0;
+ my $sum = 1;
+ $tmp_regions_sum /= 1024;
+ while ($sum < $tmp_regions_sum)
+ {
+ $sum *= 2;
+ $count++;
+ }
+ if (($count/2) == 1)
+ {
+ $count += 1;
+ }
+ $count /= 2;
+ for (my $i=0; $i<$count; $i++)
+ {
+ $nor_total_lsmt *= 2;
+ }
+ }
+ }
+ else
+ {
+ if ($tmp_regions_sum > (32*1024*1024))
+ {
+ my $count = 0;
+ my $sum = 1;
+ $tmp_regions_sum /= 512;
+ while ($sum < $tmp_regions_sum)
+ {
+ $sum *= 2;
+ $count++;
+ }
+ $count -= 8;
+ for (my $i=0; $i<$count; $i++)
+ {
+ $nor_total_lsmt *= 2;
+ }
+ }
+ else
+ {
+ my $count = 0;
+ my $sum = 1;
+ $tmp_regions_sum /= 512;
+ while ($sum < $tmp_regions_sum)
+ {
+ $sum *= 2;
+ $count++;
+ }
+ if (($count/2) == 1)
+ {
+ $count += 1;
+ }
+ $count /= 2;
+ for (my $i=0; $i<$count; $i++)
+ {
+ $nor_total_lsmt *= 2;
+ }
+ }
+ }
+
+ ###
+ my $template = <<"__TEMPLATE";
+
+#ifdef __NOR_FDM5__
+
+/*******************************************************************************
+ Follow the 4 steps below to configure flash memory
+
+ Step 1. Fill the flash bank (partition) information table,
+ flash device features flexible, multi-bank read-while-program and
+ read-while-erase capability, enabling background programming or erasing in
+ one bank simultaneously with code execution or data reads in another bank.
+ Each element in the table is the format as below:
+ {bank size, bank number},
+
+ Step 2. Modify the value of LSMT, you can see MemoryDevice_FlashDisk_FAQ for
+ detail information
+
+ Step 2. Define the toal sectors (512bytes) of system drive
+ the remainder is the size of public drive
+ If there is no partiton (just one drive, system drive)
+ set this value to STORAGE_NO_PARTITION (0xFFFFFFFF)
+
+
+ Note : Code region and FAT region can not share the same bank (partition)
+*******************************************************************************/
+
+
+/***********
+ * Step 1. *
+ ***********/
+#define NOR_FDM5_BANK_INFO_LAYOUT $bank_info_string
+
+/***********
+ * Step 2. *
+ ***********/
+#define NOR_TOTAL_LSMT $nor_total_lsmt
+
+/***********
+ * Step 3. *
+ ***********/
+// Set NOR_SYSDRV_SECTORS to 0 will disable this setting and use PARTITION_SECTORS in custom_memorydevice.h to set user drive size.
+#define NOR_SYSDRV_SECTORS 0
+
+#endif //__NOR_FDM5__
+
+__TEMPLATE
+
+ return $template;
+}
+
+#****************************************************************************
+# subroutine: split_info_for_UB
+# return: List of RegionInfo/BlockInfo/BankInfo
+# input: $info: Excel value to be split
+#****************************************************************************
+sub split_info_for_UB
+{
+ my $text = shift;
+ my @new = ();
+ my $ref_str;
+ my $i;
+ push(@new, $+) while $text =~ m{
+ "([^\"\\]*(?:\\.[^\"\\]*)*)", ?
+ | ([^,]+), ?
+ | ,
+ }gx;
+ push(@new, undef) if substr($text, -1,1) eq ',';
+ for($i = 0; $i < @new; $i++){
+ print "$i: $new[$i]\n";
+ }
+ $ref_str = "(";
+ for($i = 0; $i < @new; $i++){
+ if($i == (@new -1))
+ {
+ $ref_str .= $new[$i];
+ }
+ else
+ {
+ $ref_str .= $new[$i] . "|";
+ }
+
+ }
+ $ref_str .= ")";
+ print "$ref_str\n";
+ return $ref_str;
+}
+
+return 1;