| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2005 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| |
| /******************************************************************************* |
| * Filename: |
| * --------- |
| * ratdm_el2_struct.h |
| * |
| * Project: |
| * -------- |
| * |
| * |
| * Description: |
| * ------------ |
| * |
| * |
| * Author: |
| * ------- |
| * ------- |
| * |
| ****************************************************************************** |
| * $Log$ |
| * |
| * 09 15 2017 steve.kao |
| * [MOLY00278245] [UMOLYA] Remove obsolete parts for copro and LTM |
| * [UMOLYA][TRUNK] Remove LTM parts from EPDCP & RATDM and delete ltm_el2_msg_struct.h |
| * |
| * 08 28 2017 i-feng.chen |
| * [MOLY00273828] [Bianco][N1][RJIL] Externel (EE),0,0,99,/data/core/,1,modem,Trigger time:[2017-08-24 14:19:33.793598] md1:(MCU_core0.vpe0.tc0(VPE0)) [ASSERT] file:mcu/pcore/modem/rohc/ral/rohc_ral_cr4.c line:1276 p1:0x00000000 p2:0x00000000 p3:0x00000000 ELM |
| * [TRUNK][EPDCP][UL] Fix for data in data_req different from current epdcp rb_idx-ebi mapping |
| * |
| * 08 22 2017 i-feng.chen |
| * [MOLY00272749] [BIANCO][MT6763][RDIT][L+L][FDD][Overnight] Externel (EE),[ASSERT] file:mcu/pcore/modem/el2/el2/epdcp/src/epdcp_ul_proc.c line:3339 |
| * |
| * [TRUNK][EPDCP][UL] Handle data received in inactive protocol_idx |
| * |
| * 07 06 2017 timothy.yao |
| * [MOLY00261868] [6293]UL SIT new handling |
| * new SIT handling (to TRUNK) |
| * - UPCM / RATDM. |
| * |
| * 02 21 2017 steve.kao |
| * [MOLY00230978] [6293][EL2] Forced indirect path (VRB mode). |
| * [UMOLYA][TRUNK][RATDM] Forced VRB mode. |
| * |
| * 09 26 2016 cammie.yang |
| * [MOLY00195563] [6293][EL2][UPCM][RATDM][EPDCP] Initial feature integrations |
| * [TRUNK] UPCM/RATDM/EPDCP feature integrations from PS.DEV |
| * |
| * 08 09 2016 nicole.hsu |
| * [MOLY00196065] [MT6293][folder structure] Move EL1/EL2 files from LTE domain to SWRD domain |
| * 93 EL2 others |
| * |
| * 07 20 2016 head.hsu |
| * [MOLY00182559] [MT6292][LWA] U-Plane Development: ePDCP and RATDM |
| * (RATDM default off) |
| * [RATDM] LWA support |
| * 1. WLAN/ePDCP UP control message |
| * 2. RATDM_LWA_ENABLE |
| * 3. wrap CCMSG_ID_SYSMSGSVC with __CCCIDEV_SUPPORT__ |
| * |
| * 05 25 2015 head.hsu |
| * [MOLY00109855] [TK6291E1][1st AIQ Call][UMOLY][4G][TDD][CA] Assert Fail ccci_debug.c 498 |
| * RATDM switch regular tick source via EMAC_SCH_STATUS_IND instead of LTE IDLE state |
| * |
| * |
| ******************************************************************************/ |
| |
| #ifndef RATDM_EL2_STRUCT_H |
| #define RATDM_EL2_STRUCT_H |
| |
| #include "kal_general_types.h" |
| #include "kal_public_defs.h" |
| #include "abs_time.h" |
| #include "ltm_el2_struct.h" // TODO: remove |
| #include "qmu_bm.h" |
| #include "upcm_did.h" |
| #include "ue_testmode_struct.h" |
| |
| #define RATDM_EPDCP_MAX_NUM_DRB 8 |
| |
| /* mapping to the definitions in ltm_el2.h */ |
| //typedef drb_ulsdu_info_head_t drb_ulsdu_info_t; |
| #define ULSDU_INFO_FLAG_PRIORITY ULSDU_INFO_HEAD_FLAG_PRIORITY |
| #define ULSDU_INFO_FLAG_CTRL_PDU ULSDU_INFO_HEAD_FLAG_CTRL_PDU |
| #define ULSDU_INFO_FLAG_RETX_WI_SN ULSDU_INFO_HEAD_FLAG_RETX_WI_SN |
| #define GET_ULSDU_INFO(_p) GET_ULSDU_INFO_HEAD(_p) |
| |
| typedef struct |
| { |
| kal_uint32 total_size; /* bytes */ |
| kal_uint16 start_idx; /* SDU start index in SIT; valid range: 0~65535 */ |
| kal_uint16 cnt; /* SDU count */ |
| }ratdm_lte_dlvr_data_struct; |
| |
| typedef struct |
| { |
| kal_uint32 rb_idx; |
| upcm_did *p_head; |
| upcm_did *p_tail; |
| }epdcp_dlvr_data_struct; |
| |
| typedef struct |
| { |
| LOCAL_PARA_HDR |
| |
| kal_uint32 rb_idx; /* RB Index (2~9) */ |
| ratdm_lte_dlvr_data_struct data_pri; /* Priority data (e.g: TCP ACK) */ |
| ratdm_lte_dlvr_data_struct data_nml; /* Normal data */ |
| kal_uint8 ebi; /* Used to recognize sit_idx */ |
| }ratdm_epdcp_data_req_struct; |
| |
| typedef struct |
| { |
| LOCAL_PARA_HDR |
| |
| kal_uint8 eps_br_id; |
| kal_bool is_forced_indirect_path; |
| // KAL_TRUE: ask EPDCP to use indirect path (VRB) for the EPSB specified |
| // KAL_FALSE: let EPDCP decide the DL path (direct path or indirect path) |
| }ratdm_epdcp_dl_path_switch_req_struct; |
| |
| typedef struct |
| { |
| LOCAL_PARA_HDR |
| |
| kal_uint32 num; |
| epdcp_dlvr_data_struct data[RATDM_EPDCP_MAX_NUM_DRB]; |
| }ratdm_epdcp_data_ind_struct; |
| |
| typedef struct |
| { |
| LOCAL_PARA_HDR |
| |
| kal_uint32 message; |
| }wlan_epdcp_ctrl_msg_ind_struct; |
| |
| typedef struct |
| { |
| LOCAL_PARA_HDR |
| |
| kal_bool is_sch_open; |
| }ratdm_emac_sch_status_ind_struct; |
| |
| typedef struct |
| { |
| LOCAL_PARA_HDR |
| |
| ABS_TICK_TIME wakeup_time; |
| }ratdm_emac_next_drx_ind_struct; |
| |
| typedef struct |
| { |
| LOCAL_PARA_HDR |
| |
| kal_uint8 rb_idx; |
| kal_uint8 eps_br_id; |
| |
| //kal_uint8 rollback_exist_nml; |
| //kal_uint8 rollback_exist_pri; |
| /* rollback data in the range [start, end) */ |
| kal_uint16 rollback_start_nml; // included |
| kal_uint16 rollback_end_nml; // excluded |
| kal_uint16 rollback_start_pri; // included |
| kal_uint16 rollback_end_pri; // excluded |
| |
| |
| }ratdm_epdcp_ul_data_redir_ind_struct; |
| |
| typedef testloop_cfg_struct ratdm_epdcp_testloop_ind_struct; |
| |
| #endif /* RATDM_EL2_STRUCT_H */ |