| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2005 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| |
| /***************************************************************************** |
| * |
| * Filename: |
| * --------- |
| * custom_em.h |
| * |
| * Project: |
| * -------- |
| * Maui_Software |
| * |
| * Description: |
| * ------------ |
| * This file provides the custom engineer mode declarations |
| * |
| * Author: |
| * ------- |
| * ------- |
| * |
| *============================================================================ |
| * HISTORY |
| * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *------------------------------------------------------------------------------ |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| *------------------------------------------------------------------------------ |
| * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *============================================================================ |
| ****************************************************************************/ |
| #ifndef CUSTOM_EM_H |
| #define CUSTOM_EM_H |
| |
| #include "kal_general_types.h" |
| #include "kal_public_defs.h" //MSBB change #include "stack_config.h" |
| #include "ps_em_enum.h" |
| /* for HAL, some device definition move to device.h*/ |
| #include "device.h" |
| |
| #ifdef __TC01__ |
| #define CUSTOM_RX_PATH_1 1 // Prx only |
| #define CUSTOM_RX_PATH_0 2 // Drx only |
| #define CUSTOM_RX_PATH_0_SWAP 3 // Prx swap |
| #define CUSTOM_RX_PATH_1_SWAP 4 // Drx swap |
| #define CUSTOM_RX_BOTH 0 // Primary & Secondary path ON |
| #define CUSTOM_RX_PRI 1 // Primary path ON |
| #define CUSTOM_RX_DIV 2 // Secondary path ON |
| #define CUSTOM_RX_BOTH_RETURN 3 // Primary & Secondary path ON return string |
| #define CUSTOM_RX_PRI_RETURN 0 // Primary path ON return string |
| #define CUSTOM_RX_DRI_RETURN 6 // Secondary path ON return string |
| #endif |
| |
| typedef enum |
| { |
| CUSTOM_EM_PWM_LEVEL_1 = 0x0, |
| CUSTOM_EM_PWM_LEVEL_2, |
| CUSTOM_EM_PWM_LEVEL_3, |
| CUSTOM_EM_PWM_LEVEL_4, |
| CUSTOM_EM_PWM_LEVEL_5, |
| CUSTOM_EM_PWM_LEVEL_MAX |
| } CUSTOM_EM_PWM_LEVEL; |
| |
| typedef enum |
| { |
| CUSTOM_EM_PWM_TYPE_1 = 0x0, |
| CUSTOM_EM_PWM_TYPE_2, |
| CUSTOM_EM_PWM_TYPE_3, |
| CUSTOM_EM_PWM_TYPE_MAX |
| } CUSTOM_EM_PWM_TYPE; |
| |
| typedef enum |
| { |
| CUSTOM_EM_UART_PORT1 = 0, |
| CUSTOM_EM_UART_PORT2, |
| CUSTOM_EM_UART_PORT3, |
| CUSTOM_EM_UART_MAX_PORT |
| } CUSTOM_EM_PORT_TYPE; |
| |
| extern kal_bool custom_em_pwm_get_level_value( |
| CUSTOM_EM_PWM_TYPE type, |
| CUSTOM_EM_PWM_LEVEL level, |
| kal_uint16 *freq, |
| kal_uint8 *duty_cycle); |
| extern kal_bool custom_em_pwm_set_level_value( |
| CUSTOM_EM_PWM_TYPE type, |
| CUSTOM_EM_PWM_LEVEL level, |
| kal_uint16 freq, |
| kal_uint8 duty_cycle); |
| extern void custom_em_pwm_get_value(kal_uint16 *freq, kal_uint8 *duty_cycle); |
| extern void custom_em_pwm_set_value(kal_uint16 *freq, kal_uint8 *duty_cycle); |
| extern void custom_em_pwm_start(CUSTOM_EM_PWM_TYPE type, kal_uint32 freq, kal_uint32 duty); |
| extern void custom_em_pwm_stop(CUSTOM_EM_PWM_TYPE type); |
| extern kal_uint8 custom_em_pwm_get_hw_current_level(CUSTOM_EM_PWM_TYPE type); |
| extern void custom_em_pwm_set_level(CUSTOM_EM_PWM_TYPE type, kal_uint8 level); |
| |
| extern void custom_em_gpio_start(kal_uint8 port); |
| extern void custom_em_gpio_stop(kal_uint8 port); |
| extern void custom_em_gpo_writeio(kal_int8 data, kal_int8 port); |
| extern void custom_em_nvram_config_com_port(void); |
| /* For USB CDROM config*/ |
| extern kal_uint8 custom_em_get_usb_cdrom_config(void); |
| extern void custom_em_set_usb_cdrom_config(kal_uint8 cdrom_config); |
| |
| #ifdef __SP_RIL_SUPPORT__ |
| extern void custom_em_thermal_red_ccci_hisr_callback(kal_uint32 value); |
| #endif |
| extern sim_interface_enum custom_em_get_imei_rec_by_sim(kal_uint8 op, sim_interface_enum slot); |
| |
| #ifdef __SAR_SENSOR_SUPPORT__ |
| extern kal_int16 custom_sar_mapping(kal_uint8 g_sar_sensor_state, kal_uint16 g_scenario_index); |
| extern void custom_extant_by_sar_sensor_state(kal_uint8 src_id, kal_uint8 g_sar_sensor_state, kal_uint16 g_scenario_index, |
| kal_bool is_test_sim, kal_uint32 md_product_model_id); |
| extern kal_int8 customer_is_sar_sensor_enable(kal_uint32 md_product_model_id); |
| #endif |
| |
| #endif /* CUSTOM_EM_H */ |
| |