| /******************************************************************************* |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2012 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| * Filename: |
| * --------- |
| * pll_gen95.h |
| * |
| * Project: |
| * -------- |
| * UMOLYA |
| * |
| * Description: |
| * ------------ |
| * PLL Related Functions |
| * |
| * Author: |
| * ------- |
| * ------- |
| * |
| * ============================================================================ |
| * $Log$ |
| * |
| * 07 25 2018 jun-ying.huang |
| * [MOLY00342276] [MT6779]Add MT6779 macro for LATIFE |
| * . |
| * |
| * 05 30 2018 jun-ying.huang |
| * [MOLY00325066] [MT3967][PLL]Update PLL golden setting |
| * Remove redundant define |
| * |
| * 05 16 2018 jun-ying.huang |
| * [MOLY00325066] [MT3967][PLL]Update PLL golden setting |
| * Update 26M settle time and remove redundant function. |
| * |
| * 12 11 2017 jun-ying.huang |
| * [MOLY00295410] [PLL][MT3967] Add Macro for MT3967 |
| * . |
| * |
| * 10 30 2017 jun-ying.huang |
| * [MOLY00286084] [MT6295][PLL] Update BR_EXT section for BootRom |
| * . |
| * |
| * 08 29 2017 jun-ying.huang |
| * [MOLY00261263] [MT6295M]Update PLL driver |
| * Add PLL driver for BootRom |
| * |
| * 07 10 2017 jun-ying.huang |
| * [MOLY00261263] [MT6295M]Update PLL driver |
| * 1st version for MT6295M=EIGER |
| * |
| * 05 23 2017 jun-ying.huang |
| * [MOLY00244448] [MT6295M]Update PLL driver for MT6295M |
| * Fix build error |
| * |
| * 05 15 2017 jun-ying.huang |
| * [MOLY00244448] [MT6295M]Update PLL driver for MT6295M |
| * . |
| * |
| * 04 28 2017 jun-ying.huang |
| * [MOLY00244448] [MT6295M]Update PLL driver for MT6295M |
| * temp driver for 6295 |
| * |
| * |
| ****************************************************************************/ |
| |
| #ifndef __PLL_MT6295_H__ |
| #define __PLL_MT6295_H__ |
| |
| /******************************************************************************* |
| * Locally Used Options |
| ******************************************************************************/ |
| #define PLL_REG32(addr) *(volatile kal_uint32 *)(addr) |
| #define PLL_TYPE (volatile kal_uint32 *) |
| |
| /******************************************************************************* |
| * Define macro for boot code |
| ******************************************************************************/ |
| #define __SECTION__(S) __attribute__((__section__(#S))) |
| #define __PLL_CODE_IN_BOOT__ __SECTION__(BR_EXT)/* "BR_EXT" section for bootROM */ |
| |
| /******************************************************************************* |
| * Register Define |
| ******************************************************************************/ |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| /// PLLMIXED (0xA0140000) |
| /////////////////////////////////////////////////////////////////////////////// |
| /* ==========PLL setting========== */ |
| #define REG_MDTOP_PLLMIXED_CODA_VERSION (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x0)) |
| #define REG_MDTOP_PLLMIXED_DCXO_PLL_SETTLE_CTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x4)) |
| #define REG_MDTOP_PLLMIXED_DCXO_RDY_WO_ACK (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x8)) |
| #define REG_MDTOP_PLLMIXED_DCXO_MODE_CTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC)) |
| #define REG_MDTOP_PLLMIXED_PLL_ON_CTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x10)) |
| #define REG_MDTOP_PLLMIXED_PLL_SW_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x14)) |
| #define REG_MDTOP_PLLMIXED_PLL_SW_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x18)) |
| #define REG_MDTOP_PLLMIXED_PLL_SETTLE_26M_CTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x1C)) |
| #define REG_MDTOP_PLLMIXED_PLL_DLY_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x30)) |
| #define REG_MDTOP_PLLMIXED_PLL_DLY_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x34)) |
| #define REG_MDTOP_PLLMIXED_PLL_DLY_CTL2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x38)) |
| |
| /* ==========PLL frequency control==> PCW & POSDIV========== */ |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x40)) |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x44)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x48)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x4C)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x50)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x54)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x58)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x5C)) |
| #define REG_MDTOP_PLLMIXED_MDBPIPLL_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x60)) |
| #define REG_MDTOP_PLLMIXED_MDBPIPLL_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x64)) |
| #define REG_MDTOP_PLLMIXED_MDPLL_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x100)) |
| #define REG_MDTOP_PLLMIXED_MDPLL_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x104)) |
| #define REG_MDTOP_PLLMIXED_MDPLL_CTL2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x108)) |
| |
| #define REG_MDTOP_PLLMIXED_PLL_RESERVE (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x10C)) |
| #define REG_MDTOP_PLLMIXED_PLL_RESERVE2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x110)) |
| #define REG_MDTOP_PLLMIXED_PLL_DIV_RSTB (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x114)) |
| #define REG_MDTOP_PLLMIXED_PLL_DIV_EN (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x118)) |
| #define REG_MDTOP_PLLMIXED_PLL_SRC_SEL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x120)) |
| #define REG_MDTOP_PLLMIXED_PLL_FHCTL_RST (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x200)) |
| //#define REG_MDTOP_PLLMIXED_CONN_DSNS_INTF (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x204)) |
| |
| /* ==========PLL IRQ related========== */ |
| #define REG_MDTOP_PLLMIXED_PLL_ABNORM_GEARHP_IRQ (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x300)) |
| #define REG_MDTOP_PLLMIXED_PLL_ABNORM_GEARHP_MASK (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x304)) |
| #define REG_MDTOP_PLLMIXED_PLL_REQ_WO_DCXO_IRQ (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x308)) |
| #define REG_MDTOP_PLLMIXED_PLL_REQ_WO_DCXO_MASK (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x30C)) |
| #define REG_MDTOP_PLLMIXED_PLL_REQ_ABNORM_STS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x310)) |
| #define REG_MDTOP_PLLMIXED_PLL_HP_RDY_IRQ (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x314)) |
| #define PLLMIXED_MDMCUPLL_HP_RDY_IRQ_OFFSET (1) |
| #define PLLMIXED_MDVDSPPLL_HP_RDY_IRQ_OFFSET (2) |
| #define PLLMIXED_MDBRPPLL_HP_RDY_IRQ_OFFSET (4) |
| |
| #define REG_MDTOP_PLLMIXED_PLL_HP_RDY_IRQ_MASK (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x318)) |
| #define REG_MDTOP_PLLMIXED_DCXO_RDY_WO_ACK_MASK (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x31C)) |
| |
| /* PLL IRQ related macro */ |
| #define PLLMIXED_PLL_HP_RDY_IRQ_MASK (0x1)/* mask bit numbers for each IRQ */ |
| |
| /* ==========PLL FHCTL========== */ |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_FHCTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x400)) |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_FRDDS_LMT (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x404)) |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_SW_GEAR (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x408)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_FHCTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x410)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_FRDDS_LMT (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x414)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_SW_GEAR (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x418)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_FHCTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x430)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_FRDDS_LMT (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x434)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_SW_GEAR (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x438)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_FHCTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x440)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_FRDDS_LMT (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x444)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_SW_GEAR (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x448)) |
| #define REG_MDTOP_PLLMIXED_MDBPIPLL_FHCTL (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x450)) |
| #define REG_MDTOP_PLLMIXED_MDBPIPLL_FRDDS_LMT (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x454)) |
| #define REG_MDTOP_PLLMIXED_MDBPIPLL_SW_GEAR (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x458)) |
| |
| /* ==========PLL Gear Set========== */ |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_GEAR_SET0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x500)) |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_GEAR_SET1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x504)) |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_GEAR_SET2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x508)) |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_GEAR_SET3 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x50C)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_GEAR_SET0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x540)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_GEAR_SET1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x544)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_GEAR_SET2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x548)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_GEAR_SET3 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x54C)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_GEAR_SET0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x5C0)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_GEAR_SET1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x5C4)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_GEAR_SET2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x5C8)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_GEAR_SET3 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x5CC)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_GEAR_SET0 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x600)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_GEAR_SET1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x604)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_GEAR_SET2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x608)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_GEAR_SET3 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0x60C)) |
| |
| /* ==========PLL Status========== */ |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_STS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC00)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_STS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC04)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_STS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC08)) |
| //#define REG_MDTOP_PLLMIXED_MDTXPLL_STS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC0C)) |
| #define REG_MDTOP_PLLMIXED_MDBPIBPLL_STS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC10)) |
| |
| #define REG_MDTOP_PLLMIXED_MDMCUPLL_DA (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC14)) |
| #define REG_MDTOP_PLLMIXED_MDVDSPPLL_DA (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC18)) |
| #define REG_MDTOP_PLLMIXED_MDBRPPLL_DA (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC1C)) |
| #define REG_MDTOP_PLLMIXED_MDBPIPLL_DA (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC24)) |
| |
| #define REG_MDTOP_PLLMIXED_MDPLL1_STS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC40)) |
| #define REG_MDTOP_PLLMIXED_MDPLL1_DA (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xC44)) |
| |
| #define REG_MDTOP_PLLMIXED_FRDDS_OFF_IRQ_MODE (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xD00)) |
| #define REG_MDTOP_PLLMIXED_HP_RDY_OFF_IRQ_MODE (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xD04)) |
| |
| #define REG_MDTOP_PLLMIXED_PLL_DUMMY (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xF00)) |
| #define REG_MDTOP_PLLMIXED_PLL_DUMMY1 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xF04)) |
| #define REG_MDTOP_PLLMIXED_PLL_DUMMY2 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xF08)) |
| #define REG_MDTOP_PLLMIXED_PLL_DUMMY3 (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xF0C)) |
| #define REG_MDTOP_PLLMIXED_PLL_STATUS (PLL_TYPE(BASE_MADDR_MDTOP_PLLMIXED+0xF10)) |
| |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| /// CLKSW (0xA0150000) |
| /////////////////////////////////////////////////////////////////////////////// |
| #define REG_MDTOP_CLKSW_CODA_VERSION (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x0)) |
| #define REG_MDTOP_CLKSW_MD_SLEEP_CNT (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x4)) |
| #define REG_MDTOP_CLKSW_MDTOPSM_SW_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x10)) |
| #define REG_MDTOP_CLKSW_L1TOPSM_SW_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x14)) |
| #define REG_MDTOP_CLKSW_CKOFF_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x1C)) |
| #define REG_MDTOP_CLKSW_CLKON_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x20)) |
| #define REG_MDTOP_CLKSW_CLKSEL_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x24)) |
| |
| /* ==========SDF clock control related========== */ |
| #define REG_MDTOP_CLKSW_SDF_CK_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x28)) |
| #define REG_MDTOP_CLKSW_ATB_LOG_SDF_SW_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x2C)) |
| #define REG_MDTOP_CLKSW_LOG_ATB_CK_CTL0 (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x30)) |
| #define REG_MDTOP_CLKSW_LOG_ATB_CK_CTL1 (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x34)) |
| |
| #define REG_MDTOP_CLKSW_EXTCK_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x3C)) |
| |
| /* ==========FLEXCKGEN_SEL========== */ |
| #define REG_MDTOP_CLKSW_MDCORE_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x40)) |
| #define REG_MDTOP_CLKSW_MDSYS_BUS_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x44)) |
| #define REG_MDTOP_CLKSW_VDSP_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x48)) |
| #define REG_MDTOP_CLKSW_BRP_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x4C)) |
| #define REG_MDTOP_CLKSW_RAKE_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x50)) |
| #define REG_MDTOP_CLKSW_CSSYS_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x54)) |
| #define REG_MDTOP_CLKSW_BSI_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x58)) |
| #define REG_MDTOP_CLKSW_DBG_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x5C)) |
| #define REG_MDTOP_CLKSW_LOG_ATB_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x60)) |
| #define REG_MDTOP_CLKSW_MML2_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x64)) |
| #define REG_MDTOP_CLKSW_RXAGC_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x68)) |
| #define REG_MDTOP_CLKSW_DFESYNC_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x6C)) |
| #define REG_MDTOP_CLKSW_MML2_DFS_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x70)) |
| #define REG_MDTOP_CLKSW_MCU_DFS_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x74)) |
| #define REG_MDTOP_CLKSW_VDSP_DFS_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x78)) |
| #define REG_MDTOP_CLKSW_BRP_DFS_FLEXCKGEN_SEL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x7C)) |
| |
| /* ==========FLEXCKGEN_STS========== */ |
| #define REG_MDTOP_CLKSW_MDCORE_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xA0)) |
| #define REG_MDTOP_CLKSW_MDSYS_BUS_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xA4)) |
| #define REG_MDTOP_CLKSW_VDSP_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xA8)) |
| #define REG_MDTOP_CLKSW_BRP_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xAC)) |
| #define REG_MDTOP_CLKSW_RAKE_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xB0)) |
| #define REG_MDTOP_CLKSW_CSSYS_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xB4)) |
| #define REG_MDTOP_CLKSW_BSI_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xB8)) |
| #define REG_MDTOP_CLKSW_DBG_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xBC)) |
| #define REG_MDTOP_CLKSW_LOG_ATB_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xC0)) |
| #define REG_MDTOP_CLKSW_MML2_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xC4)) |
| #define REG_MDTOP_CLKSW_RXAGC_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xC8)) |
| #define REG_MDTOP_CLKSW_DFESYNC_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xCC)) |
| #define REG_MDTOP_CLKSW_MML2_DFS_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xE0)) |
| #define REG_MDTOP_CLKSW_MCU_DFS_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xE4)) |
| #define REG_MDTOP_CLKSW_VDSP_DFS_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xE8)) |
| #define REG_MDTOP_CLKSW_BRP_DFS_FLEXCKGEN_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xEC)) |
| |
| #define REG_MDTOP_CLKSW_CKMUX_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xF0)) |
| #define REG_MDTOP_CLKSW_PLL_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xF4)) |
| #define REG_MDTOP_CLKSW_DFS_STS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xF8)) |
| |
| /* ==========direct pll request========== */ |
| #define REG_MDTOP_CLKSW_MDMCU_DIRECT_PLLREQ (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x100)) |
| #define REG_MDTOP_CLKSW_MDBUS_DIRECT_PLLREQ (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x104)) |
| #define REG_MDTOP_CLKSW_VDSP_DIRECT_PLLREQ (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x108)) |
| #define REG_MDTOP_CLKSW_BRP_DIRECT_PLLREQ (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x10C)) |
| |
| /* ==========Frequency Meter========== */ |
| #define REG_MDTOP_CLKSW_CKMON_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x200)) |
| #define REG_MDTOP_CLKSW_FREQ_METER_CTL (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x204)) |
| #define REG_MDTOP_CLKSW_FREQ_METER_XTAL_CNT (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x208)) |
| #define REG_MDTOP_CLKSW_FREQ_METER_CKMON_CNT (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x20C)) |
| #define REG_MDTOP_CLKSW_FREQ_METER_H (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x210)) |
| #define REG_MDTOP_CLKSW_FREQ_METER_L (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0x214)) |
| |
| /* ==========DUMMY & STATUS========== */ |
| #define REG_MDTOP_CLKSW_CLK_DUMMY (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xF00)) |
| #define REG_MDTOP_CLKSW_CLK_STATUS (PLL_TYPE(BASE_MADDR_MDTOP_CLKSW+0xF04)) |
| |
| |
| /******************************************************************************* |
| * Define Macro |
| ******************************************************************************/ |
| #define MD_PLL_MAGIC_NUM 0x62950000 |
| #define MD_PLL_MAGIC_26M 0x62950026 |
| #define MD_PLL_MAGIC_MD 0x62951111 |
| |
| /** |
| * PLL divider definition |
| */ |
| #if defined(MT6295M) || defined(MT3967) || defined(MT6779) |
| #define MDBPIPLL_DIVIDER (1) /* /2 /3 /4 /5 /6 /7 */ |
| #define MDBRPPLL_DIVIDER (6) |
| #define MDVDSPPLL_DIVIDER (4) |
| #define MDMCUPLL_DIVIDER (4) |
| #else |
| #error "Unsupported Chip Target in PLL Module" |
| #endif |
| |
| /*------------------------------------------------------------------------ |
| * Purpose: Transfer PCW in xxxPLL_STS to Mhz. This macro is porting from md_dvfs_pll_freq_get(const PLL_SOURCE pll). |
| * Parameters: |
| * Input: pcw: The PCW value in xxxPLL_STS. |
| * divier: The divier for this PLL(EX: ICCPLL_DIVIDER, IMCPLL_DIVIDER...). |
| * Output: None. |
| * returns : Mhz. |
| * Note : This macr is only used to transfer pcw in xxxPLL_STS to Mhz. |
| * You should not used this macro to transfer pcw in xxxPLL_CTL0 to Mhz due to the meaning is different. |
| * (PCW in xxxPLL_STS is bit [21:7] of xxxPLL_CTL0.) |
| *------------------------------------------------------------------------ |
| */ |
| #define PLLMIXED_PLL_STS_SDM_PCW_TO_MHZ(pcw, divier) ((((pcw) * 26) / (1 << 7)) / divier) |
| |
| /******************************************************************************* |
| * ENUM |
| ******************************************************************************/ |
| // frequency meter index list (debug only) |
| typedef enum { |
| PLL_FM_SOURCE_START = 0x4, |
| PLL_FM_MDBPI_PLL_D4 = 0x4, |
| PLL_FM_MDBPI_PLL_D6 = 0x5, |
| PLL_FM_MDSYS_MML2_CLOCK = 0x6, |
| PLL_FM_FESYS_RXAGC_CLOCK = 0x7, |
| PLL_FM_MDRXSYS_DFESYNC_CLOCK = 0x8, |
| PLL_FM_FESYS_F208M_CLOCK = 0x9, |
| PLL_FM_TRACE_MON_CLOCK = 0xA, |
| PLL_FM_MDSYS_208M_CLOCK = 0xB, |
| PLL_FM_MDRXSYS_RAKE_CLOCK = 0xC, |
| PLL_FM_MDRXSYS_BRP_CLOCK = 0xD, |
| PLL_FM_MDRXSYS_VDSP_CLOCK = 0xE, |
| PLL_FM_MDTOP_LOG_ATB_CLOCK = 0xF, |
| PLL_FM_FESYS_CSYS_CLOCK = 0x10, |
| // PLL_FM_FESYS_TXSYS_CLOCK = 0x11, |
| PLL_FM_FESYS_BSI_CLOCK = 0x12, |
| PLL_FM_MDSYS_MDCORE_CLOCK = 0x13, |
| PLL_FM_MDSYS_BUS2X_NODCM_CLOCK = 0x14, |
| PLL_FM_MDSYS_BUS2X_CLOCK = 0x15, |
| PLL_FM_MDTOP_DBG_CLOCK = 0x16, |
| PLL_FM_MDTOP_F32K_CLOCK = 0x17, |
| PLL_FM_AD_MDBPI_PLL_D7 = 0x18, /* AD means "analog to digital" */ |
| PLL_FM_AD_MDBPI_PLL_D5 = 0x19, |
| PLL_FM_AD_MDBPI_PLL_D4 = 0x1A, |
| PLL_FM_AD_MDBPI_PLL_D3 = 0x1B, |
| PLL_FM_AD_MDBPI_PLL_D2 = 0x1C, |
| PLL_FM_AD_MDBRP_PLL = 0x1D, |
| PLL_FM_AD_MDVDSP_PLL = 0x1E, |
| PLL_FM_AD_MDMCU_PLL = 0x1F, |
| PLL_FM_SOURCE_END = 0x1F |
| } PLL_FM_SOURCE; |
| |
| typedef enum { |
| CLKSW_SDF_SRC_BPIPLL_DIV8 = 0, |
| CLKSW_SDF_SRC_BPIPLL_DIV4 = 1, |
| CLKSW_SDF_SRC_BPIPLL = 2, |
| CLKSW_SDF_SRC_BPIPLL_DIV2 = 3, |
| /*CLKSW_SDF_SRC_USB_PhyLink = 4,*/ /* HW didn't support. */ |
| CLKSW_SDF_SRC_26M, |
| CLKSW_SDF_SRC_END |
| } PLL_CLKSW_SDF_SRC; |
| |
| /* Below for debugging */ |
| |
| #define PLL_FM_NUM 30 /* Note: This number should also sync to EE owner. */ |
| typedef struct { |
| kal_uint32 MDBPI_PLL_D4; /* 0 */ |
| kal_uint32 MDBPI_PLL_D6; |
| kal_uint32 MDSYS_MML2_CLOCK; |
| kal_uint32 FESYS_RXAGC_CLOCK; |
| kal_uint32 MDRXSYS_DFESYNC_CLOCK; |
| kal_uint32 FESYS_F208M_CLOCK; /* 5 */ |
| kal_uint32 TRACE_MON_CLOCK; |
| kal_uint32 MDSYS_208M_CLOCK; |
| kal_uint32 MDRXSYS_RAKE_CLOCK; |
| kal_uint32 MDRXSYS_BRP_CLOCK; |
| kal_uint32 MDRXSYS_VDSP_CLOCK; /* 10 */ |
| kal_uint32 MDTOP_LOG_ATB_CLOCK; |
| kal_uint32 FESYS_CSYS_CLOCK; |
| kal_uint32 FESYS_BSI_CLOCK; |
| kal_uint32 MDSYS_MDCORE_CLOCK; |
| kal_uint32 MDSYS_BUS2X_NODCM_CLOCK; /* 15 */ |
| kal_uint32 MDSYS_BUS2X_CLOCK; |
| kal_uint32 MDTOP_DBG_CLOCK; |
| kal_uint32 AD_MDBPI_PLL_D7; |
| kal_uint32 AD_MDBPI_PLL_D5; |
| kal_uint32 AD_MDBPI_PLL_D4; /* 20 */ |
| kal_uint32 AD_MDBPI_PLL_D3; |
| kal_uint32 AD_MDBPI_PLL_D2; |
| kal_uint32 AD_MDBRP_PLL; |
| kal_uint32 AD_MDVDSP_PLL; |
| kal_uint32 AD_MDMCU_PLL; /* 25 */ |
| /* below no use */ |
| kal_uint32 NULL_26; |
| kal_uint32 NULL_27; |
| kal_uint32 NULL_28; |
| kal_uint32 NULL_29; |
| } PLL_CLK_INFO; |
| |
| extern PLL_CLK_INFO g_pll_info; |
| extern const char PLL_FM_clock[PLL_FM_NUM][32]; |
| |
| /* Above for debugging */ |
| |
| /******************************************************************************* |
| * Include header files |
| ******************************************************************************/ |
| extern void PLL_MD_Pll_Init(void); |
| extern void PLL_Set_CLK_To_26M(void); |
| |
| extern void PLL_exception_dump(void); |
| extern kal_uint32 PLL_FrequencyMeter_GetFreq(PLL_FM_SOURCE index); |
| |
| /* For SDF user in driver/sib_drv/sdf/src/md95/drv_sdf_95.c */ |
| extern kal_uint32 PLL_CLKSW_SDF_SRC_CKSEL_Get(); |
| extern kal_bool PLL_CLKSW_SDF_SRC_CKSEL_Set(PLL_CLKSW_SDF_SRC src_ck); |
| |
| #endif /* !__PLL_MT6295_H__ */ |
| |