| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2005 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| |
| /***************************************************************************** |
| * |
| * Filename: |
| * --------- |
| * cs_fac_det.h |
| * |
| * Project: |
| * -------- |
| * Maui_Software |
| * |
| * Description: |
| * ------------ |
| * This file is header file of customer specific factory mode detection mechanism interface |
| * |
| * Author: |
| * ------- |
| * ------- |
| * |
| *============================================================================ |
| * HISTORY |
| * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *------------------------------------------------------------------------------ |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * |
| *------------------------------------------------------------------------------ |
| * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *============================================================================ |
| ****************************************************************************/ |
| #ifndef __CS_FAC_DET_H__ |
| #define __CS_FAC_DET_H__ |
| |
| |
| // The enum lists the boot mode that the customer may request to force boot into |
| // Customer may request to boot into specific boot mode for specific factory mode |
| // The factory mode detection mechanism should take responsibility to link factory mode <-> factory boot mode |
| // and report to PWIC at boot time (If necessary) |
| typedef enum{ |
| CS_FAC_BOOT_IDLE = 0, |
| CS_FAC_BOOT_CHARGING, |
| CS_FAC_BOOT_USB_CHARGING, |
| CS_FAC_BOOT_MAX |
| }cs_fac_boot_mode_enum; |
| |
| // Currently, take these strctures as common structures |
| // If there is new customer specific facroty mode SPEC |
| // then we come back to review if the current definition is enough or NOT |
| |
| // The enum lists factory modes |
| // The customer may request to have different activities according to different factory mode |
| typedef enum{ |
| CS_FAC_NONE = 0x00000000, // Factory NONE ==> Means NO factory mode is detected |
| CS_FAC_UART = 0x00000001, // Bit00, Factory UART |
| CS_FAC_USB = 0x00000002, // Bit01, Factory USB |
| CS_FAC_CTRL = 0x00000004, // Bit02, Factory manual ctrl mode |
| CS_FAC_MAX = 0x10000000 // Bit31, Used for error check purpose |
| }cs_fac_mode_enum; |
| |
| #define CS_FAC_MODE_NUM 4 // Total fac modes supported |
| |
| |
| typedef struct{ |
| // Drv init |
| void (*drv_init)(void); |
| |
| // Return expect boot mode according to specific customer spec |
| // The spec is implement in the function |
| cs_fac_boot_mode_enum (*factory_det_get_boot_mode)(void); |
| |
| // Return whether the specific factory mode is detected or NOT |
| // KAL_TRUE: The specific fac event is detected |
| // KAL_FALSE: The specific fac event is NOT detected |
| kal_bool (*factory_det_query_fac_mode)(cs_fac_mode_enum); |
| |
| // Set the factory mode by other modules |
| void (*factory_det_set_fac_mode)(cs_fac_mode_enum); |
| |
| // Clear the factory mode by other modules |
| void (*factory_det_clear_fac_mode)(cs_fac_mode_enum); |
| |
| }cs_factory_detecter; |
| |
| |
| extern cs_factory_detecter *cs_fac_det; |
| extern cs_factory_detecter *cs_fac_det_get_interface(void); |
| |
| #endif // #define __CS_FAC_DET_H__ |
| |
| |
| |