| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2005 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| |
| /***************************************************************************** |
| * |
| * Filename: |
| * --------- |
| * pmic_MT6276PMU_drv.h |
| * |
| * Project: |
| * -------- |
| * Maui_Software |
| * |
| * Description: |
| * ------------ |
| * This file is intended for PMU 6276 |
| * The PMIC/PMU driver APIs exported for custom tool |
| * |
| * Author: |
| * ------- |
| * ------- |
| * |
| *============================================================================ |
| * HISTORY |
| * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *------------------------------------------------------------------------------ |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * removed! |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * |
| *------------------------------------------------------------------------------ |
| * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! |
| *============================================================================ |
| ****************************************************************************/ |
| |
| #ifndef __PMIC_MT6276PMU_DRV_H__ |
| #define __PMIC_MT6276PMU_DRV_H__ |
| #include "kal_public_api.h" |
| |
| #if defined(PMIC_6276_REG_API) |
| |
| |
| // VRF |
| extern void pmicMT6276PMU_VRF_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VRF_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VRF_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VRF_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VRF_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VRF_Cal(kal_uint32 step); |
| |
| // VTCXO |
| extern void pmicMT6276PMU_VTCXO_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VTCXO_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VTCXO_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VTCXO_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VTCXO_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VTCXO_Cal(kal_uint32 step); |
| |
| // VCAMA |
| extern void pmicMT6276PMU_VCAMA_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VCAMA_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VCAMA_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VCAMA_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VCAMA_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VCAMA_Cal(kal_uint32 step); |
| |
| // VCAMD |
| extern void pmicMT6276PMU_VCAMD_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VCAMD_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VCAMD_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VCAMD_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VCAMD_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VCAMD_Cal(kal_uint32 step); |
| |
| // VUSB |
| extern void pmicMT6276PMU_VUSB_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VUSB_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VUSB_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VUSB_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VUSB_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VUSB_Cal(kal_uint32 step); |
| |
| // VBT |
| extern void pmicMT6276PMU_VBT_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VBT_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VBT_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VBT_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VBT_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VBT_Cal(kal_uint32 step); |
| |
| // VSIM |
| extern void pmicMT6276PMU_VSIM_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VSIM_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VSIM_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VSIM_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VSIM_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VSIM_Cal(kal_uint32 step); |
| |
| // VSIM2 |
| extern void pmicMT6276PMU_VSIM2_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VSIM2_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VSIM2_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VSIM2_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VSIM2_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VSIM2_Cal(kal_uint32 step); |
| |
| // VIBR |
| extern void pmicMT6276PMU_VIBR_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VIBR_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VIBR_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VIBR_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VIBR_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VIBR_Cal(kal_uint32 step); |
| |
| // VMC |
| extern void pmicMT6276PMU_VMC_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VMC_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VMC_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VMC_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VMC_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VMC_Cal(kal_uint32 step); |
| |
| // VCAMA2 |
| extern void pmicMT6276PMU_VCAMA2_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VCAMA2_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VCAMA2_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VCAMA2_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VCAMA2_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VCAMA2_Cal(kal_uint32 step); |
| |
| // VCAMD2 |
| extern void pmicMT6276PMU_VCAMD2_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VCAMD2_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VCAMD2_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VCAMD2_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VCAMD2_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VCAMD2_Cal(kal_uint32 step); |
| |
| // VFM |
| extern void pmicMT6276PMU_VFM_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VFM_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VFM_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VFM_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VFM_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VFM_Cal(kal_uint32 step); |
| |
| // VM12 |
| extern void pmicMT6276PMU_VM12_Enable(kal_bool enable); |
| extern void pmicMT6276PMU_VM12_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMU_VM12_Cal(kal_uint32 step); |
| extern void pmicMT6276PMUNONMP_VM12_Enable(kal_bool enable); |
| extern void pmicMT6276PMUNONMP_VM12_Set_Volt(kal_uint32 volt); |
| extern void pmicMT6276PMUNONMP_VM12_Cal(kal_uint32 step); |
| |
| //// VRF_1V8 |
| //extern void pmicMT6276PMU_VRF_1V8_Enable(kal_bool enable); |
| //extern void pmicMT6276PMU_VRF_1V8_Set_Volt(kal_uint32 volt); |
| //extern void pmicMT6276PMU_VRF_1V8_Cal(kal_uint32 step); |
| //extern void pmicMT6276PMUNONMP_VRF_1V8_Enable(kal_bool enable); |
| //extern void pmicMT6276PMUNONMP_VRF_1V8_Set_Volt(kal_uint32 volt); |
| //extern void pmicMT6276PMUNONMP_VRF_1V8_Cal(kal_uint32 step); |
| |
| |
| #endif // PMIC_6276_REG_API |
| |
| #endif // #ifndef __PMIC_MT6276PMU_DRV_H__ |
| |