blob: 18a621cbe3f2d37f9ccaf7fa016a47cbd451c618 [file] [log] [blame]
/*****************************************************************************
* Copyright Statement:
* --------------------
* This software is protected by Copyright and the information contained
* herein is confidential. The software may not be copied and the information
* contained herein may not be used or disclosed except with the written
* permission of MediaTek Inc. (C) 2012
*
* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/
/*******************************************************************************
* Filename:
* ---------
* l1sp_el2_struct.h
*
* Project:
* --------
* MOLY
*
* Description:
* ------------
* message and common structure definition between LTM and EL2 modules.
*
* Author:
* -------
* -------
*
* ==========================================================================
* $Log$
*
* 07 25 2019 ming.lee
* [MOLY00418206] [NMAC-H]VoNR enhancement
* EWSP0000028893
*
* 07 03 2019 ming.lee
* [MOLY00418206] [NMAC-H]VoNR enhancement
* SWRD domain
*
* 08 24 2017 jia-shi.lin
* [MOLY00273519] [MT6763] volte data prediction design change
* volte data prediction design change
*
* 07 26 2017 jia-shi.lin
* [MOLY00266995] [MT6763] add normal mode for AAM report
* add normal mode for AAM report
*
* 05 23 2017 fu-shing.ju
* [MOLY00241210] [6293][Speech Driver]EVS Speech Driver
* EVS speech driver.
*
* 10 28 2016 jia-shi.lin
* [MOLY00194987] [MT6293][UMOLYA/PS DEV] EMAC maintenance
* emac timing report for volte dsp
*
* 10 28 2016 fu-shing.ju
* [MOLY00210308] [93MD]early porting.
* Modify AAM interface.
*
* 06 10 2015 fu-shing.ju
* [MOLY00091627] TK6291 development
* Add time information in l1sp_emac_volte_timing_info_struct.
****************************************************************************/
#ifndef _L1SP_EL2_STRUCT_H_
#define _L1SP_EL2_STRUCT_H_
/*
2017/03/14 Add comment to clarify interface
1. drx_period
This field is same with long cycle period defined in 3GPP spec.
The value means how often UE need to wake-up, 0 = no DRX configuration, possible value are 10,20,32,40,64,80,128,160,256,320,512,640,1024,1280,2048,2560.
2. sr_period
The value means how often UE can send SR, possible value are 1,2,5,10,20,40,80.
This field value will be modified when this change will reduce UE power-consumption.
When VSR is trigger, sr_period will possibly change into 20/40 ms in silence mode and 20ms in talking mode.
When EVSR is trigger, sr_period will possibly change into 40ms in talking mode.
a. VSR
If DRX cycle < 20 ms || DRX cycle < SR period
Do not trigger VSR. use original SR period.
If DRX cycle < 40ms
If SR period >= 20 then use SR period, otherwise set period=20
If DRX cycle >= 40ms
Silence: if SR period >= 40 then use SR period, otherwise set period=40
Talking: if SR period >= 20 then use SR period, otherwise set period=20
b. eVSR
b.1 Base condition
CDRX cycle length == 40ms && SR periodicity < 40ms
b.2 Dynamic start condition
UL grant received in on duration && UL grant TBS > threshold for consecutive NSTART times
b.3 Dynamic stop condition
Data exists in VoLTE RB > 30ms
If (b.1 && b.2 && !b.3)
Talking mode will also set SR period = 40.
3. time_to_next_on
Define as the time duration between current time and next DRX on duration (wake-up).
4. time_to_trigger_sr
Define as the time duration between current time and next SR.
5. current_time_us
Define as current time that use ust_get_current_time to get.
*/
#include "kal_public_api.h"
typedef enum{
SP4G_AAMPLUS_STA_SILENCE = 0,
SP4G_AAMPLUS_STA_TALK,
SP4G_AAMPLUS_STA_SID_FIRST
}SP4G_AAMPlus_State_t;
typedef enum{
L1SP_EMAC_REPORT_MODE_SR_0_AFTER_HO = 0,
L1SP_EMAC_REPORT_MODE_NORMAL = 1
}l1sp_emac_report_mode_e;
typedef struct{
LOCAL_PARA_HDR
//raw information from speech driver
SP4G_AAMPlus_State_t silence_talk;
kal_uint32 notify_to_data_ms;
kal_uint32 issue_time;
}l1sp_emac_volte_notify_mode_change_struct;
typedef l1sp_emac_volte_notify_mode_change_struct l1sp_nmac_vonr_notify_mode_change_struct;
typedef struct{
LOCAL_PARA_HDR
//to indicate if the RAT is activated for IMS call
kal_bool is_lch_on_for_voice;
//raw information from eMAC
kal_uint32 RX_period; //ms
kal_uint32 TX_period; //ms
kal_uint32 time2nextRX; //ms
kal_uint32 time2nextTX; //ms
kal_uint32 issueTime; //ms
}l1sp_emac_resync_info_struct;
typedef l1sp_emac_resync_info_struct l1sp_nr_resync_info_struct;
typedef struct{
kal_uint32 drx_period;
kal_uint32 sr_period;
kal_uint32 time_to_next_on;
kal_uint32 time_to_trig_sr;
kal_uint32 current_time_us;
}l1sp_emac_volte_timing_info_struct;
#endif /* ----- #ifndef _L1SP_EL2_STRUCT_H_ ----- */