| /***************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2005 |
| * |
| * BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES |
| * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") |
| * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON |
| * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. |
| * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE |
| * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR |
| * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH |
| * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO |
| * NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S |
| * SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. |
| * |
| * BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE |
| * LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, |
| * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, |
| * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO |
| * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. |
| * |
| * THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE |
| * WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF |
| * LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND |
| * RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER |
| * THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). |
| * |
| *****************************************************************************/ |
| /******************************************************************************* |
| * Copyright Statement: |
| * -------------------- |
| * This software is protected by Copyright and the information contained |
| * herein is confidential. The software may not be copied and the information |
| * contained herein may not be used or disclosed except with the written |
| * permission of MediaTek Inc. (C) 2002 |
| * |
| *******************************************************************************/ |
| |
| /******************************************************************************* |
| * Filename: |
| * --------- |
| * rr_mpal_interface.h |
| * |
| * Project: |
| * -------- |
| * MAUI |
| * |
| * Description: |
| * ------------ |
| * MPAL-RR interface definition |
| * |
| * Author: |
| * ------- |
| * ------- |
| * |
| *------------------------------------------------------------------------------ |
| * $Log$ |
| * |
| * 01 22 2014 chi-chung.lin |
| * [MOLY00049161] [LTE Gemini] GAS code sync from Byron CBr to Dev |
| * . |
| * |
| * 11 06 2013 hamann.chang |
| * [MOLY00036515] [gas] design change for RLC/ MPAL flush |
| * . |
| * |
| * 01 23 2013 henry.lai |
| * [MOLY00009222] [GAS][Multi-Mode Development] Merge GAS multi-mode development to MOLY |
| * . |
| * |
| * 01 11 2013 henry.lai |
| * [Henry][Multi-Mode Development] GAS Development and R8 CR Sync |
| * |
| * 12 12 2012 ty.wang |
| * [MOLY00006932] Fix MoDIS build warning in WR8/MOLY |
| * . |
| * |
| * 12 03 2012 ty.wang |
| * [MOLY00006932] Fix MoDIS build warning in WR8/MOLY |
| * . |
| * |
| * 11 30 2012 ty.wang |
| * [MOLY00006932] Fix MoDIS build warning in WR8/MOLY |
| * . |
| * |
| * 11 30 2012 ty.wang |
| * [MOLY00006932] Fix MoDIS build warning in WR8/MOLY |
| * . |
| * |
| * 09 10 2012 ty.wang |
| * [MOLY00003373] [MAC/RLC/MPAL] Remove __NEW_TBF_ARCH__ from 2G RR on MOLY |
| * . |
| * |
| * 11 09 2011 stanleyhy.chen |
| * removed! |
| * . |
| * |
| * 06 09 2011 peter.chien |
| * removed! |
| * . |
| * |
| * 05 12 2011 henry.lai |
| * removed! |
| * . |
| * |
| * 03 02 2011 stanleyhy.chen |
| * removed! |
| * GEMINI2.0] ACS and MEAS parts |
| * |
| * 12 20 2010 rachel.liu |
| * removed! |
| * . |
| * |
| * 12 14 2010 nancy.chang |
| * removed! |
| * . |
| * |
| * 12 14 2010 sherry.kuo |
| * removed! |
| * . |
| * |
| * 12 02 2010 sherry.kuo |
| * removed! |
| * . |
| * |
| * 10 16 2010 nancy.chang |
| * removed! |
| * . |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * add to source control recursely |
| * |
| * removed! |
| * removed! |
| * Change rr to rr2. |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * created by clearfsimport |
| * |
| * removed! |
| * removed! |
| * |
| * |
| * removed! |
| * removed! |
| * |
| * |
| *******************************************************************************/ |
| |
| /******************************************************************************** |
| * Copyright Statement: |
| * -------------------- |
| * |
| * This product has been developed using a protocol stack |
| * developed by Sasken Communication Technologies Limited. |
| * |
| ********************************************************************************/ |
| |
| #ifndef _RR_MPAL_INTERFACE_H |
| #define _RR_MPAL_INTERFACE_H |
| |
| /* Nancy 20101005: Suggest Add for RHR */ |
| #include "kal_general_types.h" |
| |
| #ifndef __MTK_TARGET__ |
| #include "kal_public_defs.h" |
| #endif |
| |
| //#ifndef _RR_INTERFACE_H |
| //#error "rr_interface.h should be included first" |
| //#endif |
| |
| /****************************************************************************** |
| * Constant |
| ******************************************************************************/ |
| #define ALGORITHM_A5_1 (1) |
| #define ALGORITHM_A5_2 (2) |
| #define ALGORITHM_A5_3 (3) |
| #define ALGORITHM_A5_4 (4) |
| #define ALGORITHM_A5_5 (5) |
| #define ALGORITHM_A5_6 (6) |
| #define ALGORITHM_A5_7 (7) |
| |
| #define TCH_LOOP_A (0) |
| #define TCH_LOOP_B (1) |
| #define TCH_LOOP_C (2) |
| #define TCH_LOOP_D (3) |
| #define TCH_LOOP_E (4) |
| #define TCH_LOOP_F (5) |
| #define TCH_LOOP_I (6) |
| |
| #define DAI_TEST_NORMAL (0) |
| #define DAI_TEST_SPEECH_DEC_DTX (1) |
| #define DAI_TEST_SPEECH_ENC_DTX (2) |
| #define DAI_TEST_ACOUTIC_AD_DA (4) |
| |
| #define HANDOVER_L1_NO_ERROR (0) |
| #define HANDOVER_L1_TA_OUT_OF_RANGE (1) |
| |
| #define HANDOVER_TYPE_PRE_SYNC (0) |
| #define HANDOVER_TYPE_PSEUDO_SYNC (1) |
| #define HANDOVER_TYPE_FINELY_SYNC (2) |
| #define HANDOVER_TYPE_NON_SYNC (3) |
| |
| #define GSM_BLK_SIZE (23) |
| #define MAX_NUM_OF_HOPPING_FREQ (64) |
| #define MAX_BA_LIST_LEN (32) |
| #define MAX_NEIGHBOR_ACUISITION_LIST_LEN (7) |
| #define MAX_POWER_SCAN_RESULTS_LEN (200) |
| #define MANUAL_SEL_SCAN_ID (128) |
| |
| #define BAND_PGSM900 (0x01) |
| #define BAND_EGSM900 (0x02) |
| #define BAND_RGSM900 (0x04) |
| #define BAND_DCS1800 (0x08) |
| #define BAND_PCS1900 (0x10) |
| #define BAND_GSM450 (0x20) |
| #define BAND_GSM480 (0x40) |
| #define BAND_GSM850 (0x80) |
| |
| #define POWER_CLASS_1 (0) |
| #define POWER_CLASS_2 (1) |
| #define POWER_CLASS_3 (2) |
| #define POWER_CLASS_4 (3) |
| #define POWER_CLASS_5 (4) |
| #define POWER_CLASS_INVALID (-1) |
| |
| #ifdef __PS_SERVICE__ |
| #define MPAL_MAX_UL_SLOTS (4) |
| #define MPAL_MAX_DL_SLOTS (4) |
| #define MPAL_DATA_Q_SIZE (2*MPAL_MAX_UL_SLOTS) |
| #define MAX_EXT_MEAS_ARFCNS (32) |
| #define MAX_ALLOC_BITMAP_LENGTH (36) |
| #define MPAL_INVALID_FRAME_NO (0xffffffff) |
| #endif /* __PS_SERVICE__ */ |
| |
| #define MAX_TBF_NUM (1) //support 1 TBFs |
| |
| /****************************************************************************** |
| * Enum Value |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * Functional prototype |
| ******************************************************************************/ |
| |
| #ifdef __PS_SERVICE__ |
| /****************************************************************************** |
| * Function Name: |
| * mpal_rlc_flush_proc |
| * DESCRIPTION |
| * This function is provided by MPAL, and RR will call this function when the |
| * flush procedure starts. MPAL will flush the data blocks in its data queue, |
| * and transmit uplink dummy block before new data request is received from RR. |
| * In addition, MPAL will pass the necessary parameters to RR. |
| *******************************************************************************/ |
| #ifdef __MTK_TARGET__ |
| extern void mpal_rlc_flush_proc(kal_uint8 *no_rts_sent, kal_uint8 *total_blks_sent, kal_uint8 tbf_index, kal_uint16 *frame_no_of_last_txed); |
| extern void rlc_mpal_rlc_flush_proc(kal_uint8 *no_rts_sent, kal_uint8 *total_blks_sent, kal_uint16 *frame_no_of_last_txed); |
| #else |
| extern void mpal_rlc_flush_proc(ilm_struct *ilm_ptr); |
| #endif |
| |
| |
| |
| #endif /* __PS_SERVICE__ */ |
| |
| /****************************************************************************** |
| * Structures generated by ASN files |
| ******************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif /* __cplusplus */ |
| |
| #ifdef TEST_TOOL |
| #include "tt_defs.h" |
| #else |
| #include "kal_public_api.h" |
| #endif /* TEST_TOOL */ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* _RR_MPAL_INTERFACE_H */ |
| |