[Feature][T8TSK-212][Modem]Update MTK modem version to MOBILETEK35_IVT_T800_MOLY.NR15.R3.MD700.MP.V75.P7
Change-Id: If0c63635f0618ab3991ee448e424b119426305fc
diff --git a/mcu/custom/service/mcf/system_files/mcf_system.csv b/mcu/custom/service/mcf/system_files/mcf_system.csv
index dcd51f4..a963553 100755
--- a/mcu/custom/service/mcf/system_files/mcf_system.csv
+++ b/mcu/custom/service/mcf/system_files/mcf_system.csv
@@ -1024,61 +1024,61 @@
1031,60519,NVRAM_EF_EL1_UTAS_PARAMETER_LID,1,stx_so_ptxp_gain_thd,utas_params.stx_so_ptxp_gain_thd,OTA,no,no,no,no,[MCF] TxP gain threshold<BR>[Purpose] Customization TAS parameters <BR>[Use timing] Boot up,SHORT,2,,,-2,NR15.R3.MD700.MP,,<= -1,,,,Antenna Features,RF_Proprietary,,,modify the value through MCF tool and check if this value is written to NVRAM,Pass,,,,
1032,60938,NVRAM_EF_ERRC_CUSTOM_CA_COMB_LIST_LID,"1,2",black_list,black_list,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The black list of CA combination for the UE. Each combination shall be separated by semicolon. The maximum number of characters in this field is 1632. If no setting for BandwidthCombinationSet it means all sets defined in 3GPP TS 36.101 are used by default. Example: 66AA-12A-001111;5A-1AA;3CC;3CA-1A;3C-1AA;3CA;3AA-3A;3A-1AA;2AA-4A",CHAR,2016,2016,,0x00,NR15.R3.MD700.MP,,0 ~ 255:Ascii character code value. 3GPP compliant CA notation format. See example in Description.,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall be no longer than 10<BR>[Init] <BR>Use NVRAM default value.<BR>[Test Step] <BR>1. Set CA black list by MCF tool<BR>2. Check if blacklisted CA band combinations are reported in UE-EUTRA-Capability.<BR>[Expected Result]<BR>Blacklisted CA band combinations shall not be reported.,Untested,,,,
1033,60938,NVRAM_EF_ERRC_CUSTOM_CA_COMB_LIST_LID,"1,2",white_list,white_list,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The white list of CA combination for the UE. Each combination shall be separated by semicolon. The maximum number of characters in this field is 1632. If no setting for BandwidthCombinationSet it means all sets defined in 3GPP TS 36.101 are used by default. Example: 66AA-12A-001111;5A-1AA;3CC;3CA-1A;3C-1AA;3CA;3AA-3A;3A-1AA;2AA-4A",CHAR,2016,2016,,0x00,NR15.R3.MD700.MP,,0 ~ 255:Ascii character code value. 3GPP compliant CA notation format. See example in Description.,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall be no longer than 10.<BR>[Init] <BR>Use NVRAM default value.<BR>[Test Step] <BR>1. Set CA white list by MCF tool<BR>2. Check if whitelisted CA band combinations are reported in UE-EUTRA-Capability.<BR>[Expected Result]<BR>Whitelisted CA band combinations shall be reported.,Untested,,,,
-1034,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band,inverted_list.disable_band_by_plmn_list[0~19].band,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]which band don't want to disable in this plmn group.",UNSIGNED SHORT,64,32,,"inverted_list.disable_band_by_plmn_list[0].band[0] = {0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}",NR15.R3.MD700.MP,,1 ~ 256:LTE Band Indicator,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1035,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band_num,inverted_list.disable_band_by_plmn_list[0~19].band_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid band number for band setting.",UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].band_num = 0x01,NR15.R3.MD700.MP,,0 ~ 32:Disable band array element number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1036,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc1,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mcc1,OTA and OTA BY OP,no,no,yes,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mcc1: 0x04<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1037,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc2,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mcc2,OTA and OTA BY OP,no,no,yes,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mcc2: 0x06<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1038,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc3,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mcc3,OTA and OTA BY OP,no,no,yes,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mcc3: 0x00<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1039,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc1,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mnc1,OTA and OTA BY OP,no,no,yes,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mnc1: 0x0f<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1040,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc2,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mnc2,OTA and OTA BY OP,no,no,yes,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mnc2: 0x0f<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1041,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc3,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mnc3,OTA and OTA BY OP,no,no,yes,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mnc3: 0x0f<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mnc3: 0x0f,NR15.R3.MD700.MP,,0 ~ 9:MNC digit<BR>0x0F:Unused MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1042,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",plmn_list_len,inverted_list.disable_band_by_plmn_list[0~19].plmn_list_len,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid plmn num in this plmn group.",UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn_list_len: 0x06<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn_list_len: 0x00,NR15.R3.MD700.MP,,0 ~ 20:PLMN List array element number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1043,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",plmn_num,inverted_list.plmn_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid plmn group number of inverted list setting.",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0 ~ 20:valid PLMN number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1044,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band,positive_list.disable_band_by_plmn_list[0~19].band,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]which band want to disable",UNSIGNED SHORT,64,32,,"positive_list.disable_band_by_plmn_list[0~7].band: {0x26, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}<BR>positive_list.disable_band_by_plmn_list[8~19].band: {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}",NR15.R3.MD700.MP,,1 ~ 256:LTE Band Indicator,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1045,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band_num,positive_list.disable_band_by_plmn_list[0~19].band_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid band number for band setting.",UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].band_num: 0x02<BR>positive_list.disable_band_by_plmn_list[8~19].band_num: 0x00,NR15.R3.MD700.MP,,0 ~ 32:Disable band array element number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1046,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc1,positive_list.disable_band_by_plmn_list[0~19].plmn.mcc1,OTA and OTA BY OP,no,no,yes,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mcc1: 0x03<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1047,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc2,positive_list.disable_band_by_plmn_list[0~19].plmn.mcc2,OTA and OTA BY OP,no,no,yes,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~6].plmn.mcc2: 0x01<BR>positive_list.disable_band_by_plmn_list[7].plmn.mcc2: 0x03<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1048,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc3,positive_list.disable_band_by_plmn_list[0~19].plmn.mcc3,OTA and OTA BY OP,no,no,yes,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0].plmn.mcc3: 0x00<BR>positive_list.disable_band_by_plmn_list[1].plmn.mcc3: 0x01<BR>positive_list.disable_band_by_plmn_list[2].plmn.mcc3: 0x02<BR>positive_list.disable_band_by_plmn_list[3].plmn.mcc3: 0x03<BR>positive_list.disable_band_by_plmn_list[4].plmn.mcc3: 0x04<BR>positive_list.disable_band_by_plmn_list[5].plmn.mcc3: 0x05<BR>positive_list.disable_band_by_plmn_list[6].plmn.mcc3: 0x06<BR>positive_list.disable_band_by_plmn_list[7].plmn.mcc3: 0x00<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1049,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc1,positive_list.disable_band_by_plmn_list[0~19].plmn.mnc1,OTA and OTA BY OP,no,no,yes,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mnc1: 0x0f<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1050,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc2,positive_list.disable_band_by_plmn_list[0~19].plmn.mnc2,OTA and OTA BY OP,no,no,yes,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mnc2: 0x0f<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1051,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc3,positive_list.disable_band_by_plmn_list[0~19].plmn.mnc3,OTA and OTA BY OP,no,no,yes,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mnc3: 0x0f<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mnc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1052,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",plmn_num,positive_list.plmn_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid plmn number of positive list setting.",UNSIGNED CHAR,1,,,0x08,NR15.R3.MD700.MP,,0 ~ 20:valid PLMN number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Untested,,,,
-1053,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",capability_name,cap_by_plmn_table[0~7].capability_name,OTA and OTA BY OP,no,no,no,no,indicate capability name to turn off,ENUM,2,,,cap_by_plmn_table[0~7].capability_name: 0xffff,NR15.R3.MD700.MP,,0x0000:NVRAM_CAPA_INIT<BR>0xFFFF:NVRAM_CAPA_MAX<BR>0x0002:NVRAM_CAPA_STANDALONEGNSSLOCATIONR10<BR>0x0001:NVRAM_CAPA_LOGGEDMEASUREMENTSIDLER10,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1054,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",exclude_plmn_status,cap_by_plmn_table[0~7].exclude_plmn_status,OTA and OTA BY OP,no,no,no,no,indicate this plmn is excluded for this capability (0x0: not exclude; 0x1: exclude;),ENUM,1,,,cap_by_plmn_table[0~7].exclude_plmn_status: 0x00,NR15.R3.MD700.MP,,KAL_FALSE<BR>KAL_TRUE,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1055,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc1,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1056,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc2,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1057,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc3,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1058,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc1,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1059,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc2,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1060,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc3,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1061,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",count_threshold,dynamic_downgrade_capa_setting.count_threshold,OTA and OTA BY OP,no,no,no,no,"if NW query capability count exceed count_threshold during timer_length (sec), activate downgrade capability",UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.MP,,0 ~ 255:count threshold,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1062,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",cause,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cause,OTA and OTA BY OP,no,no,no,no,which capability that need to downgrade,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cause: 0x00,NR15.R3.MD700.MP,,"1, 2, 4, 8, ...(Bitmask)",,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1063,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",cell_id,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].cell_id,OTA and OTA BY OP,no,no,no,no,cell ID,UNSIGNED INT,4,,,0x00,NR15.R3.MD700.MP,,0 ~ 2^32-1:Cell ID,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1064,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc1,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1065,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc2,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1066,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc3,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1067,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc1,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1068,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc2,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1069,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc3,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1070,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_cell,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].num_of_cell,OTA and OTA BY OP,no,no,no,no,numbers of cell,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,0 ~ 10:cell number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1071,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_config,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.num_of_config,OTA and OTA BY OP,no,no,no,no,numbers of cell config,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,0 ~ 10:cell config number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1072,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_config,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.num_of_config,OTA and OTA BY OP,no,no,no,no,numbers of plmn config,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0 ~ 10:PLMN config number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1073,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",band_list,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].band_list,OTA and OTA BY OP,no,no,no,no,band ID,UNSIGNED SHORT,20,10,,"dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].band_list: {0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].band_list: {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}",NR15.R3.MD700.MP,,1 ~ 256:LTE Band Indicator,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1074,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",cause,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].cause,OTA and OTA BY OP,no,no,no,no,which capability that need to downgrade,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].cause: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].cause: 0x00,NR15.R3.MD700.MP,,"1, 2, 4, 8, ... (Bitmask)",,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1075,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_band,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].num_of_band,OTA and OTA BY OP,no,no,no,no,numbers of band,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].num_of_band: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].num_of_band: 0x00,NR15.R3.MD700.MP,,0 ~ 10:band number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1076,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_plmn,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].num_of_plmn,OTA and OTA BY OP,no,no,no,no,numbers of plmn,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].num_of_plmn: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].num_of_plmn: 0x00,NR15.R3.MD700.MP,,0 ~ 10:PLMN number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1077,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc1,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mcc1: 0x04<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1078,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc2,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mcc2: 0x06<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1079,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc3,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mcc3: 0x00<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1080,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc1,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mnc1: 0x00<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1081,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc2,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mnc2: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1082,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc3,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mnc3: 0x0f<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mnc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1083,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",timer_length,dynamic_downgrade_capa_setting.timer_length,OTA and OTA BY OP,no,no,no,no,"if NW query capability count exceed count_threshold during timer_length (sec), activate downgrade capability",UNSIGNED SHORT,2,,,"0xb4,",NR15.R3.MD700.MP,,0 ~ 255:guard timer duration in second.,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Untested,,,,
-1084,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_qualmin_th,Q_qualmin_th,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-34 ~ -3:Qqualmin threshold,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
-1085,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_qualmin_val,Q_qualmin_val,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-34 ~ -3:Qqualmin value,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
-1086,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_rxlev_th,Q_rxlev_th,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-70 ~ -22:Qrxlev threshold,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
-1087,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_rxlev_val,Q_rxlev_val,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-70 ~ -22:Qrxlev value,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
-1088,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",afr_mib_sib1_protect_tim_val,afr_mib_sib1_protect_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]MIB/SIB1 protection timer for AFR,UNSIGNED SHORT,2,,,"0x0028,",NR15.R3.MD700.MP,,0 ~ 2^32-1:Timer duration in unit of timer unit,,,NO,[LTE Protocol Baseline]SIB_READ_MODIFY,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+1034,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band,inverted_list.disable_band_by_plmn_list[0~19].band,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]which band don't want to disable in this plmn group.",UNSIGNED SHORT,64,32,,"inverted_list.disable_band_by_plmn_list[0].band[0] = {0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}",NR15.R3.MD700.MP,,1 ~ 256:LTE Band Indicator,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1035,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band_num,inverted_list.disable_band_by_plmn_list[0~19].band_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid band number for band setting.",UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].band_num = 0x01,NR15.R3.MD700.MP,,0 ~ 32:Disable band array element number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1036,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc1,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mcc1,OTA and OTA BY OP,no,no,yes,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mcc1: 0x04<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1037,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc2,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mcc2,OTA and OTA BY OP,no,no,yes,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mcc2: 0x06<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1038,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc3,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mcc3,OTA and OTA BY OP,no,no,yes,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mcc3: 0x00<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1039,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc1,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mnc1,OTA and OTA BY OP,no,no,yes,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mnc1: 0x0f<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1040,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc2,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mnc2,OTA and OTA BY OP,no,no,yes,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mnc2: 0x0f<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1041,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc3,inverted_list.disable_band_by_plmn_list[0~19].plmn[0~19].mnc3,OTA and OTA BY OP,no,no,yes,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn[0].mnc3: 0x0f<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn[1~19].mnc3: 0x0f,NR15.R3.MD700.MP,,0 ~ 9:MNC digit<BR>0x0F:Unused MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1042,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",plmn_list_len,inverted_list.disable_band_by_plmn_list[0~19].plmn_list_len,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid plmn num in this plmn group.",UNSIGNED CHAR,1,,,inverted_list.disable_band_by_plmn_list[0].plmn_list_len: 0x06<BR>inverted_list.disable_band_by_plmn_list[1~19].plmn_list_len: 0x00,NR15.R3.MD700.MP,,0 ~ 20:PLMN List array element number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1043,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",plmn_num,inverted_list.plmn_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid plmn group number of inverted list setting.",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0 ~ 20:valid PLMN number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay): Y<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1044,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band,positive_list.disable_band_by_plmn_list[0~19].band,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]which band want to disable",UNSIGNED SHORT,64,32,,"positive_list.disable_band_by_plmn_list[0~7].band: {0x26, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}<BR>positive_list.disable_band_by_plmn_list[8~19].band: {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}",NR15.R3.MD700.MP,,1 ~ 256:LTE Band Indicator,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1045,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",band_num,positive_list.disable_band_by_plmn_list[0~19].band_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid band number for band setting.",UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].band_num: 0x02<BR>positive_list.disable_band_by_plmn_list[8~19].band_num: 0x00,NR15.R3.MD700.MP,,0 ~ 32:Disable band array element number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1046,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc1,positive_list.disable_band_by_plmn_list[0~19].plmn.mcc1,OTA and OTA BY OP,no,no,yes,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mcc1: 0x03<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1047,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc2,positive_list.disable_band_by_plmn_list[0~19].plmn.mcc2,OTA and OTA BY OP,no,no,yes,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~6].plmn.mcc2: 0x01<BR>positive_list.disable_band_by_plmn_list[7].plmn.mcc2: 0x03<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1048,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mcc3,positive_list.disable_band_by_plmn_list[0~19].plmn.mcc3,OTA and OTA BY OP,no,no,yes,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0].plmn.mcc3: 0x00<BR>positive_list.disable_band_by_plmn_list[1].plmn.mcc3: 0x01<BR>positive_list.disable_band_by_plmn_list[2].plmn.mcc3: 0x02<BR>positive_list.disable_band_by_plmn_list[3].plmn.mcc3: 0x03<BR>positive_list.disable_band_by_plmn_list[4].plmn.mcc3: 0x04<BR>positive_list.disable_band_by_plmn_list[5].plmn.mcc3: 0x05<BR>positive_list.disable_band_by_plmn_list[6].plmn.mcc3: 0x06<BR>positive_list.disable_band_by_plmn_list[7].plmn.mcc3: 0x00<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1049,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc1,positive_list.disable_band_by_plmn_list[0~19].plmn.mnc1,OTA and OTA BY OP,no,no,yes,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mnc1: 0x0f<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1050,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc2,positive_list.disable_band_by_plmn_list[0~19].plmn.mnc2,OTA and OTA BY OP,no,no,yes,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mnc2: 0x0f<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1051,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",mnc3,positive_list.disable_band_by_plmn_list[0~19].plmn.mnc3,OTA and OTA BY OP,no,no,yes,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,positive_list.disable_band_by_plmn_list[0~7].plmn.mnc3: 0x0f<BR>positive_list.disable_band_by_plmn_list[8~19].plmn.mnc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1052,60941,NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID,"1,2",plmn_num,positive_list.plmn_num,OTA and OTA BY OP,no,no,yes,no,"[DOC, MCF]The valid plmn number of positive list setting.",UNSIGNED CHAR,1,,,0x08,NR15.R3.MD700.MP,,0 ~ 20:valid PLMN number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set/Make Serving PLMN to be one of PLMN group from MCF setting.<BR>2. Set customization setting by MCF tool.<BR>3. Power on and camp on machine or live network.<BR>[Expected Result]<BR>Registration complete and UE shall disable relevant supported band accordingly.,Pass,,,,
+1053,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",capability_name,cap_by_plmn_table[0~7].capability_name,OTA and OTA BY OP,no,no,no,no,indicate capability name to turn off,ENUM,2,,,cap_by_plmn_table[0~7].capability_name: 0xffff,NR15.R3.MD700.MP,,0x0000:NVRAM_CAPA_INIT<BR>0xFFFF:NVRAM_CAPA_MAX<BR>0x0002:NVRAM_CAPA_STANDALONEGNSSLOCATIONR10<BR>0x0001:NVRAM_CAPA_LOGGEDMEASUREMENTSIDLER10,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1054,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",exclude_plmn_status,cap_by_plmn_table[0~7].exclude_plmn_status,OTA and OTA BY OP,no,no,no,no,indicate this plmn is excluded for this capability (0x0: not exclude; 0x1: exclude;),ENUM,1,,,cap_by_plmn_table[0~7].exclude_plmn_status: 0x00,NR15.R3.MD700.MP,,KAL_FALSE<BR>KAL_TRUE,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1055,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc1,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1056,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc2,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1057,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc3,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1058,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc1,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1059,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc2,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1060,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc3,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,cap_by_plmn_table[0~7].plmnid_list[0~7].mnc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1061,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",count_threshold,dynamic_downgrade_capa_setting.count_threshold,OTA and OTA BY OP,no,no,no,no,"if NW query capability count exceed count_threshold during timer_length (sec), activate downgrade capability",UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.MP,,0 ~ 255:count threshold,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1062,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",cause,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cause,OTA and OTA BY OP,no,no,no,no,which capability that need to downgrade,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cause: 0x00,NR15.R3.MD700.MP,,"1, 2, 4, 8, ...(Bitmask)",,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1063,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",cell_id,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].cell_id,OTA and OTA BY OP,no,no,no,no,cell ID,UNSIGNED INT,4,,,0x00,NR15.R3.MD700.MP,,0 ~ 2^32-1:Cell ID,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1064,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc1,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1065,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc2,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1066,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc3,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1067,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc1,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1068,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc2,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1069,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc3,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].cell_list[0~9].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1070,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_cell,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.cell_config[0~9].num_of_cell,OTA and OTA BY OP,no,no,no,no,numbers of cell,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,0 ~ 10:cell number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1071,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_config,dynamic_downgrade_capa_setting.downgrade_capa_by_cell.num_of_config,OTA and OTA BY OP,no,no,no,no,numbers of cell config,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,0 ~ 10:cell config number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1072,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_config,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.num_of_config,OTA and OTA BY OP,no,no,no,no,numbers of plmn config,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0 ~ 10:PLMN config number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1073,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",band_list,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].band_list,OTA and OTA BY OP,no,no,no,no,band ID,UNSIGNED SHORT,20,10,,"dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].band_list: {0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].band_list: {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,}",NR15.R3.MD700.MP,,1 ~ 256:LTE Band Indicator,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1074,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",cause,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].cause,OTA and OTA BY OP,no,no,no,no,which capability that need to downgrade,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].cause: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].cause: 0x00,NR15.R3.MD700.MP,,"1, 2, 4, 8, ... (Bitmask)",,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1075,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_band,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].num_of_band,OTA and OTA BY OP,no,no,no,no,numbers of band,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].num_of_band: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].num_of_band: 0x00,NR15.R3.MD700.MP,,0 ~ 10:band number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1076,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",num_of_plmn,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].num_of_plmn,OTA and OTA BY OP,no,no,no,no,numbers of plmn,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].num_of_plmn: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].num_of_plmn: 0x00,NR15.R3.MD700.MP,,0 ~ 10:PLMN number,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1077,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc1,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mcc1: 0x04<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mcc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1078,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc2,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mcc2: 0x06<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mcc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1079,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mcc3,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mcc3: 0x00<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mcc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1080,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc1,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mnc1: 0x00<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mnc1: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1081,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc2,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mnc2: 0x01<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mnc2: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1082,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",mnc3,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0~9].plmn_list[0~9].mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[0].plmn_list[0].mnc3: 0x0f<BR>dynamic_downgrade_capa_setting.downgrade_capa_by_plmn.plmn_config[1~9].plmn_list[1~9].mnc3: 0x0f,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1083,60943,NVRAM_EF_ERRC_CUSTOM_FEATURE_LID,"1,2",timer_length,dynamic_downgrade_capa_setting.timer_length,OTA and OTA BY OP,no,no,no,no,"if NW query capability count exceed count_threshold during timer_length (sec), activate downgrade capability",UNSIGNED SHORT,2,,,"0xb4,",NR15.R3.MD700.MP,,0 ~ 255:guard timer duration in second.,,,NO,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Set a certain feature to be disabled for a certain or a group PLMN(s) by MCF tool.<BR>2. Or set a certaion feature to be downgraded by cell or by PLMN.<BR>3. Create corresponding cell or PLMN test environment.<BR>4. Power on UE and perform registration.<BR>[Expected Result]<BR>UE report EUTRA-Capability accordingly. (check if a certain feature is disabled/downgraded or not),Pass,,,,
+1084,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_qualmin_th,Q_qualmin_th,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-34 ~ -3:Qqualmin threshold,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Pass,,,,
+1085,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_qualmin_val,Q_qualmin_val,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-34 ~ -3:Qqualmin value,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Pass,,,,
+1086,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_rxlev_th,Q_rxlev_th,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-70 ~ -22:Qrxlev threshold,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Pass,,,,
+1087,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",Q_rxlev_val,Q_rxlev_val,OTA and OTA BY OP,no,no,no,no,[MCF][Doc],CHAR,1,,,0x00,NR15.R3.MD700.MP,,-70 ~ -22:Qrxlev value,,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value by MCF tool and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Pass,,,,
+1088,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",afr_mib_sib1_protect_tim_val,afr_mib_sib1_protect_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]MIB/SIB1 protection timer for AFR,UNSIGNED SHORT,2,,,"0x0028,",NR15.R3.MD700.MP,,0 ~ 2^32-1:Timer duration in unit of timer unit,,,NO,[LTE Protocol Baseline]SIB_READ_MODIFY,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
1089,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",afr_timer,afr_timer,Not Support,no,yes,no,no,[INTERNAL]This parameter is phased out.,UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.MP,,NA (phase out),,,NA,MD Config,Modem - Customer Requirement,,,NA (Phase out),Untested,,,,
1090,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc1,ampr_plmn[0~11].mcc1,Not Support,no,yes,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,ampr_plmn[0~8].mcc1: 0x03<BR>ampr_plmn[9~11].mcc1: 0xff,NR15.R3.MD700.MP,,"0 ~ 9, or 0xFF",,,NO,Power Class,HPUE,,,NA (Internal),Untested,,,,
1091,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc2,ampr_plmn[0~11].mcc2,Not Support,no,yes,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,ampr_plmn[0~6].mcc2: 0x01<BR>ampr_plmn[7].mcc2: 0x03<BR>ampr_plmn[8].mcc2: 0x07<BR>ampr_plmn[9~11].mcc2: 0xff,NR15.R3.MD700.MP,,"0 ~ 9, or 0xFF",,,NO,Power Class,HPUE,,,NA (Internal),Untested,,,,
@@ -1086,45 +1086,45 @@
1093,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc1,ampr_plmn[0~11].mnc1,Not Support,no,yes,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,ampr_plmn[0~8].mnc1: 0xff<BR>ampr_plmn[9~11].mnc1: 0xff,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,Power Class,HPUE,,,NA (Internal),Untested,,,,
1094,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc2,ampr_plmn[0~11].mnc2,Not Support,no,yes,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,ampr_plmn[0~8].mnc1: 0xff<BR>ampr_plmn[9~11].mnc1: 0xff,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,Power Class,HPUE,,,NA (Internal),Untested,,,,
1095,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc3,ampr_plmn[0~11].mnc3,Not Support,no,yes,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,ampr_plmn[0~8].mnc1: 0xff<BR>ampr_plmn[9~11].mnc1: 0xff,NR15.R3.MD700.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,Power Class,HPUE,,,NA (Internal),Untested,,,,
-1096,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode,background_search_status_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: 2G4 FDD BG Search, b2: 3G4 FDD BG Search, b3: 2G4 TDD BG Search, b4: 3G4 TDD BG Search, b5-b8:Reserved]",,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Untested,,,,
-1097,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b1,background_search_status_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.2G4 FDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disable<BR>1:Enable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Untested,,,,
-1098,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b2,background_search_status_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.3G4 FDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Untested,,,,
-1099,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b3,background_search_status_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.2G4 TDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Untested,,,,
-1100,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b4,background_search_status_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.3G4 TDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Untested,,,,
+1096,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode,background_search_status_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: 2G4 FDD BG Search, b2: 3G4 FDD BG Search, b3: 2G4 TDD BG Search, b4: 3G4 TDD BG Search, b5-b8:Reserved]",,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
+1097,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b1,background_search_status_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.2G4 FDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disable<BR>1:Enable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
+1098,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b2,background_search_status_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.3G4 FDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
+1099,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b3,background_search_status_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.2G4 TDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
+1100,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b4,background_search_status_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.3G4 TDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
1101,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b5,background_search_status_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.Reserved.,BIT,4,,4,0x00,NR15.R3.MD700.MP,,0:Reserved bits,,,NO,MD Config,Modem - Customer Requirement,,,NA (Reserved),Untested,,,,
1102,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",c2k_to_lte_rsrp_delta,c2k_to_lte_rsrp_delta,Not Support,no,yes,no,no,[INTERNAL]Debug only,SHORT,2,,,"0x0018,",NR15.R3.MD700.MP,,-32768 to 32767:RSRP,,,__CDMA2000_RAT__,MD Config,Modem - Customer Requirement,,,NA (Phase out),Untested,,,,
1103,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",carrs_interval,carrs_interval,Not Support,no,yes,no,no,[INTERNAL]PHASE OUT,UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.MP,,0 ~ 255:time interval,,,NO (Phase out),"Network Search Optimization - Fast Roaming, Fast List, Early Roaming Detection",MTK Proprietary,,,NA (Phase out),Untested,,,,
1104,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",crc_ng_tim_shift,crc_ng_tim_shift,OTA and OTA BY OP,no,no,no,no,[MCF]CRC NG timer,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.MP,,0 ~ 255:time shift in ms,,,NO,[LTE Protocol Baseline]SIB_READ_MODIFY,Modem System Test,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 5 min<BR>[Init]: Use NVRAM default value<BR>[Test Step]<BR>1. Set SI window length in machine<BR>2. Set wanted CRC NG timer shift value by MCF tool<BR>3. Power on and make SIB CRC NG happen in test<BR>[Expected Result]<BR>UE shall enlarge CRC NG timer duration by timer shift value.,Untested,,,,
-1105,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status,csfb_enhancement_item_status,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabled",UNSIGNED CHAR,1,,,0x1f,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: not used, b2: Reduce LAU, b3: Defer SI13, b4: 2G AFR, b5: 3G AFR, b6-b8:Reserved]",,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
+1105,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status,csfb_enhancement_item_status,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabled",UNSIGNED CHAR,1,,,0x1f,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: not used, b2: Reduce LAU, b3: Defer SI13, b4: 2G AFR, b5: 3G AFR, b6-b8:Reserved]",,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1106,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b1,csfb_enhancement_item_status.b1,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disablednot used",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Not used),Untested,,,,
-1107,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b2,csfb_enhancement_item_status.b2,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledReduce LAU",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1108,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b3,csfb_enhancement_item_status.b3,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledDefer SI13",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
+1107,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b2,csfb_enhancement_item_status.b2,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledReduce LAU",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1108,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b3,csfb_enhancement_item_status.b3,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledDefer SI13",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1109,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b4,csfb_enhancement_item_status.b4,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabled2G AFR",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,[GSM Protocol Baseline]AFR,Modem System Test,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
1110,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b5,csfb_enhancement_item_status.b5,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabled3G AFR",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,___DISABLE_3G_AFR__,[WCDMA Protocol Baseline]AFR,Modem System Test,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
1111,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b6,csfb_enhancement_item_status.b6,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledreserved",BIT,3,,3,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
-1112,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2,csfb_enhancement_item_status_2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: 2G FDD eCSFB, b2: 3G FDD eCSFB, b3: 2G TDD eCSFB, b4: 3G TDD eCSFB, b5-b8:Reserved]",,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1113,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b1,csfb_enhancement_item_status_2.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.2G FDD eCSFB,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1114,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b2,csfb_enhancement_item_status_2.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.3G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1115,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b3,csfb_enhancement_item_status_2.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.2G TDD eCSFB,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1116,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b4,csfb_enhancement_item_status_2.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.3G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
+1112,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2,csfb_enhancement_item_status_2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: 2G FDD eCSFB, b2: 3G FDD eCSFB, b3: 2G TDD eCSFB, b4: 3G TDD eCSFB, b5-b8:Reserved]",,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1113,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b1,csfb_enhancement_item_status_2.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.2G FDD eCSFB,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1114,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b2,csfb_enhancement_item_status_2.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.3G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1115,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b3,csfb_enhancement_item_status_2.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.2G TDD eCSFB,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1116,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b4,csfb_enhancement_item_status_2.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.3G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1117,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b5,csfb_enhancement_item_status_2.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.reserved,BIT,4,,4,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
-1118,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode,csfb_enhancement_item_status_2_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: 2G FDD eCSFB, b2: 3G FDD eCSFB, b3: 2G TDD eCSFB, b4: 3G TDD eCSFB, b5-b8:Reserved]",,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1119,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b1,csfb_enhancement_item_status_2_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.2G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1120,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b2,csfb_enhancement_item_status_2_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.3G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1121,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b3,csfb_enhancement_item_status_2_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.2G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1122,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b4,csfb_enhancement_item_status_2_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.3G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
+1118,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode,csfb_enhancement_item_status_2_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: 2G FDD eCSFB, b2: 3G FDD eCSFB, b3: 2G TDD eCSFB, b4: 3G TDD eCSFB, b5-b8:Reserved]",,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1119,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b1,csfb_enhancement_item_status_2_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.2G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1120,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b2,csfb_enhancement_item_status_2_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.3G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1121,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b3,csfb_enhancement_item_status_2_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.2G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1122,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b4,csfb_enhancement_item_status_2_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.3G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1123,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b5,csfb_enhancement_item_status_2_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.reserved,BIT,4,,4,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
-1124,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode,csfb_enhancement_item_status_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.,UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: not used, b2: Reduce LAU, b3: Defer SI13, b4: 2G AFR, b5: 3G AFR, b6-b8:Reserved]",,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
+1124,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode,csfb_enhancement_item_status_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.,UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.MP,,"0 ~ 255: Bitmask [b1: not used, b2: Reduce LAU, b3: Defer SI13, b4: 2G AFR, b5: 3G AFR, b6-b8:Reserved]",,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1125,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b1,csfb_enhancement_item_status_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.not used,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Not used),Untested,,,,
-1126,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b2,csfb_enhancement_item_status_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.Reduce LAU,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1127,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b3,csfb_enhancement_item_status_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.Defer SI13,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
+1126,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b2,csfb_enhancement_item_status_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.Reduce LAU,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
+1127,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b3,csfb_enhancement_item_status_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.Defer SI13,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1128,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b4,csfb_enhancement_item_status_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.2G AFR,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,[GSM Protocol Baseline]AFR,Modem System Test,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
1129,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b5,csfb_enhancement_item_status_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.3G AFR,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,___DISABLE_3G_AFR__,[WCDMA Protocol Baseline]AFR,Modem System Test,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
1130,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b6,csfb_enhancement_item_status_in_test_mode.b6,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.reserved,BIT,3,,3,0x00,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
1131,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_handover_other_si_protection_tim_val,customer_handover_other_si_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI when HO,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,[LTE Protocol Baseline]HANDOVER,Modem System Test,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Handover<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Untested,,,,
1132,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_handover_si1_protection_tim_val,customer_handover_si1_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI1 when HO,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,[LTE Protocol Baseline]HANDOVER,Modem System Test,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Handover<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Untested,,,,
-1133,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_other_si_protection_tim_val,customer_other_si_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Registration<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Untested,,,,
-1134,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_si1_protection_tim_val,customer_si1_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI1,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Registration<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Untested,,,,
+1133,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_other_si_protection_tim_val,customer_other_si_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Registration<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Pass,,,,
+1134,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_si1_protection_tim_val,customer_si1_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI1,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Registration<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Pass,,,,
1135,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",bandwidth,designated_carrier_inf.black_freq_list[0~39].bandwidth,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.MP,,0:BW_6_RB<BR>1:BW_15_RB<BR>2:BW_25_RB<BR>0xFF:BW_INVALID<BR>4:BW_75_RB<BR>5:BW_100_RB<BR>3:BW_50_RB,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1136,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",earfcn,designated_carrier_inf.black_freq_list[0~39].earfcn,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED INT,4,,,"0x5e, 0x97, 0x00, 0x00,",NR15.R3.MD700.MP,,0 ~ 2^32-1:EARFCN,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1137,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc1,designated_carrier_inf.black_freq_list[0~39].plmn_id.mcc1,OTA and OTA BY OP,no,yes,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
@@ -1154,7 +1154,7 @@
1161,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",priority_band_set_by_em,designated_carrier_inf.priority_band_set_by_em,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,1:KAL_TRUE (priority band is set by EM)<BR>0:KAL_FALSE,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1162,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_cust_qqual,enable_cust_qqual,OTA and OTA BY OP,no,no,no,no,[MCF][Doc] Customized Qqualmin,ENUM,1,,,0x00,NR15.R3.MD700.MP,,1:KAL_TRUE (Enable)<BR>0:KAL_FALSE (Disable),,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value in NVRAM and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
1163,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_cust_qrxlev,enable_cust_qrxlev,OTA and OTA BY OP,no,no,no,no,[MCF][Doc] Customized Qrxlevmin,ENUM,1,,,0x00,NR15.R3.MD700.MP,,1:KAL_TRUE (Enable)<BR>0:KAL_FALSE (Disable),,,NO,[LTE Protocol Baseline]Cell_Selection,Modem System Test,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value in NVRAM and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
-1164,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_cust_resel_s_judge,enable_cust_resel_s_judge,OTA and OTA BY OP,no,no,no,no,[MCF]Customized reselection SIB1 Srxlev judge,ENUM,1,,,0x00,NR15.R3.MD700.MP,,1:KAL_TRUE (cell_reject_ind = TRUE)<BR>0:KAL_FALSE (cell_reject_ind = FALSE),,,NO,LTE Protocol (R9 Baseline),4G,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell reselection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell reselection time<BR>2. Set customization value in NVRAM and perform 2nd trial, record the cell reselection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
+1164,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_cust_resel_s_judge,enable_cust_resel_s_judge,OTA and OTA BY OP,no,no,no,no,[MCF]Customized reselection SIB1 Srxlev judge,ENUM,1,,,0x00,NR15.R3.MD700.MP,,1:KAL_TRUE (cell_reject_ind = TRUE)<BR>0:KAL_FALSE (cell_reject_ind = FALSE),,,NO,LTE Protocol (R9 Baseline),4G,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell reselection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell reselection time<BR>2. Set customization value in NVRAM and perform 2nd trial, record the cell reselection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Pass,,,,
1165,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",band,errc_band_preference_list[0~19].band,Not Support,no,no,no,no,[TIER1]Customized band for band preference feature to take effect,UNSIGNED SHORT,2,,,errc_band_preference_list[0~1].band: 0x0005<BR>errc_band_preference_list[2].band: 0x0008<BR>errc_band_preference_list[3~19].band: 0x0000,NR15.R3.MD700.MP,,1 ~ 256:LTE Band Indicator,,,NO,[LTE Protocol Baseline]MEASUREMENT,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
1166,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",conn_rsrp_offset,errc_band_preference_list[0~19].conn_rsrp_offset,Not Support,no,no,no,no,[TIER1]Customized RSRP offset of CONNECTED mode for band preference feature,SHORT,2,,,errc_band_preference_list[0~2].conn_rsrp_offset: 0xfffc<BR>errc_band_preference_list[3~19].conn_rsrp_offset: 0x0000,NR15.R3.MD700.MP,,-32768 ~ 32767:RSRP offset value,,,NO,[LTE Protocol Baseline]MEASUREMENT,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
1167,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",conn_rsrq_offset,errc_band_preference_list[0~19].conn_rsrq_offset,Not Support,no,no,no,no,[TIER1]Customized RSRQ offset of CONNECTED mode for band preference feature,SHORT,2,,,errc_band_preference_list[0~2].conn_rsrq_offset: 0xfffe<BR>errc_band_preference_list[3~19].conn_rsrq_offset: 0x0000,NR15.R3.MD700.MP,,-32768 ~ 32767:RSRQ offset value,,,NO,[LTE Protocol Baseline]MEASUREMENT,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
@@ -1274,10 +1274,10 @@
1281,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",th3_interval,th3_interval,Not Support,no,yes,no,no,[INTERNAL],UNSIGNED SHORT,2,,,0x0501,NR15.R3.MD700.MP,,0 ~ 65535:th3 interval,,,NO,[LTE Protocol Baseline]MEASUREMENT,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
1282,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",th4_interval,th4_interval,Not Support,no,yes,no,no,[INTERNAL],UNSIGNED SHORT,2,,,0x0a01,NR15.R3.MD700.MP,,0 ~ 65535:th4 interval,,,NO,[LTE Protocol Baseline]MEASUREMENT,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
1283,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",tnsib_clear,tnsib_clear,Not Support,no,yes,no,no,[INTERNAL]The timer value to evaluate if a cell need to be barred with SIB CRC NG cause.timer value = (tnsib_clear*10)seconds.default:60,UNSIGNED CHAR,1,,,0x3c,NR15.R3.MD700.MP,,0 ~ 255:Nsib count clear timer,,,NO,[LTE Protocol Baseline]SIB_READ_MODIFY,Modem System Test,,,,Untested,,,,
-1284,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",trach,trach,OTA and OTA BY OP,no,yes,no,no,"[INTERNAL]bar timer value for cell barred due to RACH failure.timer value = (trach)seconds, default:60",UNSIGNED SHORT,2,,,"0x3c, 0x00,",NR15.R3.MD700.MP,,0 ~ 65535:Bar timer duration in time unit,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-1285,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",traerr,traerr,OTA and OTA BY OP,no,yes,no,no,[INTERNAL],UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.MP,,2 ~ 255:Bar cell timer duration in time unit,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+1284,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",trach,trach,OTA and OTA BY OP,no,yes,no,no,"[INTERNAL]bar timer value for cell barred due to RACH failure.timer value = (trach)seconds, default:60",UNSIGNED SHORT,2,,,"0x3c, 0x00,",NR15.R3.MD700.MP,,0 ~ 65535:Bar timer duration in time unit,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+1285,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",traerr,traerr,OTA and OTA BY OP,no,yes,no,no,[INTERNAL],UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.MP,,2 ~ 255:Bar cell timer duration in time unit,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
1286,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",tsib_ng_rej,tsib_ng_rej,Not Support,no,yes,no,no,"[INTERNAL]bar timer value for cell barred due to SIB CRC NG.timer value = (tsib_ng_rej*10)seconds, default:60",UNSIGNED CHAR,1,,,0x3c,NR15.R3.MD700.MP,,0 ~ 255:SIB decode NG reject timer duration in 10s,,,NO,[LTE Protocol Baseline]SIB_READ_MODIFY,Modem System Test,,,,Untested,,,,
-1287,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",tvalid_raerr,tvalid_raerr,OTA and OTA BY OP,no,yes,no,no,[INTERNAL],UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.MP,,0 ~ 255:valid timer duration in time unit,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+1287,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",tvalid_raerr,tvalid_raerr,OTA and OTA BY OP,no,yes,no,no,[INTERNAL],UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.MP,,0 ~ 255:valid timer duration in time unit,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
1288,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",vidle_rsrp_diff,vidle_rsrp_diff,Not Support,no,yes,no,no,[INTERNAL],CHAR,1,,,0x08,NR15.R3.MD700.MP,,-128 ~ 127:V-IDLE RSRP difference value,,,__GEMINI__,[LTE Protocol Baseline]Cell_Reselection,Modem System Test,,,,Untested,,,,
1289,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",vidle_srv_low_rsrq,vidle_srv_low_rsrq,Not Support,no,yes,no,no,[INTERNAL],CHAR,1,,,0xf2,NR15.R3.MD700.MP,,-128 ~ 127:Serving cell low rsrq value,,,__GEMINI__,[LTE Protocol Baseline]Cell_Reselection,Modem System Test,,,,Untested,,,,
1290,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",vidle_srv_low_sinr,vidle_srv_low_sinr,Not Support,no,yes,no,no,[INTERNAL],CHAR,1,,,0x03,NR15.R3.MD700.MP,,-128 ~ 127:Serving cell low sinr value,,,__GEMINI__,[LTE Protocol Baseline]Cell_Reselection,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
@@ -2798,10 +2798,10 @@
2817,59701,NVRAM_EF_L1_ANT_RXPWR_OFFSET_LID,1,offset,pcell_list[0~12].arfcn_list[0~12].offset,OTA,no,no,no,no,[MCF]settings for ANT RXPWR OFFSET,SHORT,2,,,"-60, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 60, 60, 60, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 60, 60, 60, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 60, 60, 60, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0",NR15.R3.MD700.MP,,0x0000:pcell_list[0].arfcn_list[1 ~ 12].offset<BR>0x003c:pcell_list[1].arfcn_list[0 ~ 2].offset<BR>0x0000:pcell_list[1].arfcn_list[3 ~ 12].offset<BR>0x0000:pcell_list[4 ~ 12].arfcn_list[0 ~ 12].offset<BR>0x0000:pcell_list[2].arfcn_list[3 ~ 12].offset<BR>0x003c:pcell_list[3].arfcn_list[0 ~ 2].offset<BR>0x0000:pcell_list[3].arfcn_list[3 ~ 12].offset<BR>0xffc4:pcell_list[0].arfcn_list[0].offset<BR>0x003c:pcell_list[2].arfcn_list[0 ~ 2].offset,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
2818,59701,NVRAM_EF_L1_ANT_RXPWR_OFFSET_LID,1,threshold,pcell_list[0~12].arfcn_list[0~12].threshold,OTA,no,no,no,no,[MCF]settings for ANT RXPWR OFFSET,SHORT,2,,,"-100, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -100, -100, -100, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -100, -100, -100, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -100, -100, -100, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0",NR15.R3.MD700.MP,,0xff9c:pcell_list[0].arfcn_list[0].threshold<BR>0x0000:pcell_list[0].arfcn_list[1 ~ 12].threshold<BR>0xff9c:pcell_list[1].arfcn_list[0 ~ 2].threshold<BR>0x0000:pcell_list[1].arfcn_list[3 ~ 12].threshold<BR>0x0000:pcell_list[4 ~ 12].arfcn_list[0 ~ 12].threshold<BR>0x0000:pcell_list[2].arfcn_list[3 ~ 12].threshold<BR>0xff9c:pcell_list[3].arfcn_list[0 ~ 2].threshold<BR>0x0000:pcell_list[3].arfcn_list[3 ~ 12].threshold<BR>0xff9c:pcell_list[2].arfcn_list[0 ~ 2].threshold,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
2819,59701,NVRAM_EF_L1_ANT_RXPWR_OFFSET_LID,1,pcell_id,pcell_list[0~12].pcell_id,OTA,no,no,no,no,[MCF]settings for ANT RXPWR OFFSET,UNSIGNED INT,4,,,pcell_list[0].pcell_id: 22102786<BR>pcell_list[1].pcell_id: 185582337<BR>pcell_list[2].pcell_id: 153610370<BR>pcell_list[3].pcell_id: 189858050<BR>pcell_list[4].pcell_id: 65535<BR>pcell_list[5].pcell_id: 0<BR>pcell_list[6].pcell_id: 0<BR>pcell_list[7].pcell_id: 0<BR>pcell_list[8].pcell_id: 0<BR>pcell_list[9].pcell_id: 0<BR>pcell_list[10].pcell_id: 0<BR>pcell_list[11].pcell_id: 0<BR>pcell_list[12].pcell_id: 0,NR15.R3.MD700.MP,,65535:pcell_list[4].pcell_id<BR>0:pcell_list[5].pcell_id<BR>0:pcell_list[12].pcell_id<BR>0:pcell_list[7].pcell_id<BR>0:pcell_list[8].pcell_id<BR>0:pcell_list[9].pcell_id<BR>0:pcell_list[10].pcell_id<BR>0:pcell_list[11].pcell_id<BR>0:pcell_list[6].pcell_id<BR>22102786:pcell_list[0].pcell_id<BR>185582337:pcell_list[1].pcell_id<BR>153610370:pcell_list[2].pcell_id<BR>189858050:pcell_list[3].pcell_id,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
-2820,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_dcs1800,bandsupport_dcs1800,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x01:DCS 1800 band supported<BR>0x00:DCS 1800 band not supported,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
-2821,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_gsm850,bandsupport_gsm850,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x00:GSM 850 band not supported<BR>0x01:GSM850 band supported,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
-2822,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_gsm900,bandsupport_gsm900,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x01:GSM 900 band supported<BR>0x00:GSM 900 band not supported,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
-2823,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_pcs1900,bandsupport_pcs1900,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x01:PCS 1900 band supported<BR>0x00:PCS 1900 band not supported,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
+2820,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_dcs1800,bandsupport_dcs1800,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x01:DCS 1800 band supported<BR>0x00:DCS 1800 band not supported,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
+2821,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_gsm850,bandsupport_gsm850,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x00:GSM 850 band not supported<BR>0x01:GSM850 band supported,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
+2822,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_gsm900,bandsupport_gsm900,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x01:GSM 900 band supported<BR>0x00:GSM 900 band not supported,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
+2823,59691,NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID,1,bandsupport_pcs1900,bandsupport_pcs1900,OTA,no,no,yes,no,"[MCF,DOC]",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0x01:PCS 1900 band supported<BR>0x00:PCS 1900 band not supported,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
2824,59698,NVRAM_EF_L1_DAT_CUSTOM_FE_ROUTE_PARAMES_LID,1,L1_DAT_ENABLE,L1_DAT_ENABLE,OTA,no,no,yes,no,"[MCF,DOC]",ENUM,1,,,0,NR15.R3.MD700.MP,,L1D_DAT_ENABLE:Enable DAT<BR>L1D_DAT_DISABLE:Disable DAT,,,,Antenna Features,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
2825,59671,NVRAM_EF_L1_EPSK_TX_POWER_ROLLBACK_TABLE_LID,1,rollback_2t,rollback_data[0~4].rollback_2t,OTA,no,no,yes,no,,CHAR,1,,,rollback_data[0].rollback_2t:0<BR>rollback_data[1].rollback_2t:8<BR>rollback_data[2].rollback_2t:8<BR>rollback_data[3].rollback_2t:8<BR>rollback_data[4].rollback_2t:8,NR15.R3.MD700.MP,,0x00~0xff:The range of rollback data is from -128 ~ 127,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
2826,59671,NVRAM_EF_L1_EPSK_TX_POWER_ROLLBACK_TABLE_LID,1,rollback_3t,rollback_data[0~4].rollback_3t,OTA,no,no,yes,no,,CHAR,1,,,rollback_data[0].rollback_3t:0<BR>rollback_data[1].rollback_3t:24<BR>rollback_data[2].rollback_3t:24<BR>rollback_data[3].rollback_3t:24<BR>rollback_data[4].rollback_3t:24,NR15.R3.MD700.MP,,0x00~0xff:The range of rollback data is from -128 ~ 127,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
@@ -5940,8 +5940,8 @@
5961,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_IGNORE_REDIR_DEDI_GERAN,modem_sbp_config[89].SBP_IGNORE_REDIR_DEDI_GERAN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureignore redir and dedicated priority to GERANbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x01:enable<BR>0x00:disable,,,,,,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Receive release with redirection info for 2G<BR> [Expected Result]<BR>Ignore redirection,Pass,,,,
5962,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_IMCSMS_RETRY_FOR_202_REV_OR_NOT,modem_sbp_config[32].SBP_IMCSMS_RETRY_FOR_202_REV_OR_NOT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0~1,,,,,,,,,Pass,,,,
5963,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_IMEI_LOCK_SUPPORT,modem_sbp_config[4].SBP_IMEI_LOCK_SUPPORT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Support Verification of IMEI before camping on Networkbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-5964,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureImproved PDP activation/deactivation retry performancebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Improve PDP act and deact retry performance on full stack suspend and lower layer failures<BR>0:PDP act and deact retry performance shall not be applied on full stack suspend and lower layer failures,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 5 mins <BR>[Init] DUT boot up with dual SIM inserted and mobile data enabled.<BR>[Test Step] <BR>1) DUT register to PS services in 2G/3G<BR>2) Verity DU perform PDP activation successfully,Untested,,,,
-5965,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,OTA and OTA BY OP,no,no,no,yes,"In case of IMSI detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked and GPRS detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked or DC_Status_RLC_Release_Discard,IMSI/GPRS detach is aborted and local detach is performed. This leads unsync between UE and network.If this SBP is enabled, IMSI and GPRS detach(due to power off) procedure will be retried in the case of lower layer failure with above mentio",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0x0:If Disable, IMSI and GPRS detach will not be re-tried.<BR>0x1:If Enable, IMSI and GPRS detach will be re-tried",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR>Test Time (minutes) : 10 mins <BR>[Init] : UE is expected to register to 23G network for both CS-PS domain. <BR>[Test Step]<BR>1. Perform Detach <BR>2. UE cannot send DETACH_REQ to Network as RLC ACK for Detach fails because of lower layer failure.<BR><BR>[Expected Result]<BR> UE is expected to perform Detach request again,Untested,,,,
+5964,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureImproved PDP activation/deactivation retry performancebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Improve PDP act and deact retry performance on full stack suspend and lower layer failures<BR>0:PDP act and deact retry performance shall not be applied on full stack suspend and lower layer failures,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 5 mins <BR>[Init] DUT boot up with dual SIM inserted and mobile data enabled.<BR>[Test Step] <BR>1) DUT register to PS services in 2G/3G<BR>2) Verity DU perform PDP activation successfully,Pass,,,,
+5965,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,OTA and OTA BY OP,no,no,no,yes,"In case of IMSI detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked and GPRS detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked or DC_Status_RLC_Release_Discard,IMSI/GPRS detach is aborted and local detach is performed. This leads unsync between UE and network.If this SBP is enabled, IMSI and GPRS detach(due to power off) procedure will be retried in the case of lower layer failure with above mentio",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0x0:If Disable, IMSI and GPRS detach will not be re-tried.<BR>0x1:If Enable, IMSI and GPRS detach will be re-tried",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR>Test Time (minutes) : 10 mins <BR>[Init] : UE is expected to register to 23G network for both CS-PS domain. <BR>[Test Step]<BR>1. Perform Detach <BR>2. UE cannot send DETACH_REQ to Network as RLC ACK for Detach fails because of lower layer failure.<BR><BR>[Expected Result]<BR> UE is expected to perform Detach request again,Pass,,,,
5966,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_IMSI_PAGING_ATTACK_HANDLING,modem_sbp_config[84].SBP_IMSI_PAGING_ATTACK_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIMSI paging attack preventionbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable the handling of IMSI paging attack.<BR>0:Disable the handling of IMSI paging attack.,,,__ENABLE_SBP_IMSI_PAGING_ATTACK_HANDLING__,Anti Fake Cell,OP Requirement,,,,Pass,,,,
5967,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_INACTIVE_MODE_SERVICE_RECOVERY,modem_sbp_config[102].SBP_INACTIVE_MODE_SERVICE_RECOVERY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable inactive mode service recovery featurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
5968,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_INTERROGATE_GROUPS_OF_SS,modem_sbp_config[30].SBP_INTERROGATE_GROUPS_OF_SS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureallow to interrogate groups of Supplementary Servicebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
@@ -6019,8 +6019,8 @@
6040,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_LTE_SUPPORT_NONDEFAULT_SIB2_UL,modem_sbp_config[58].SBP_LTE_SUPPORT_NONDEFAULT_SIB2_UL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDetermine if UE can camp on the LTE cell with non_default UL_FREQ.bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,0:UE can't camp on the LTE cell with UL_FREQ in SystemInformationBlockType2 which is not determined from the default TX-RX frequency separation defined in TS 36.101. UE will treat this cell as a not-suitable cell.<BR>1:UE can camp on the LTE cell with UL_FREQ in SystemInformationBlockType2 which is not determined from the default TX-RX frequency separation defined in TS 36.101.,,,No,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
6041,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LTE_T325_DEPRIORITY,modem_sbp_config[83].SBP_LTE_T325_DEPRIORITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable T325 deprioritizationbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enabled<BR>0:Disabled,,,,[LTE Protocol Baseline]Cell_Reselection,Modem System Test,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
6042,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_LTE_U,modem_sbp_config[28].SBP_LTE_U,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Unlicensed.<BR>bit 0 Not Supported<BR>bit 1 Supported",BIT,1,,1,0,NR15.R3.MD700.MP,,1:support<BR>0:not support,,,__LTE_U__,[LTE Protocol Baseline]CAPABILITY,Modem System Test,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6043,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure LU before CSFB ECC call if LAI is differentbit 0:0:Do not trigger LU before CSFB ECC call if LAI is differentbit 1:1:Do LU before CSFB ECC call if LAI is different",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x0:Do not Configure LU before CSFB ECC call if LAI is different<BR>0x1:Configure LU before CSFB ECC call if LAI is different,,,__ENABLE_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF__,[WCDMA Protocol Baseline]AFR,Modem System Test,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] NA <BR>[Test Step]<BR>1. Register UE in LTE.<BR>2. Perform Emergency call <BR>[Expected Result]<BR>UE is expected to fo LU before making Emergency call if current LAI is different from register LAI.,Untested,,,,
-6044,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure the option to do LU before making a CSFB emergency callbit 0:0:LU not needed before ECCbit 1:1:LU needed before ECC",BIT,1,,1,0x01,NR15.R3.MD700.MP,,"0x00:If disable, UE will behave as per spec<BR>0x01:If enable, UE need to do LU before CSFB emergency call",,,__DISABLE_LU_BEFORE_CSFB_ECC_NEEDED__,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Add the PLMN in LR_BEFORE_CSFB_ECC_PLMN_LIST array in mm_custom_config.c <BR> Boot up the device & UE register in LTE.<BR> [Test Step]<BR> Perform Emergency call & UE perform CSFB to 23G network but with diffrent LA given by network in previous LTE registration.<BR> <BR> [Expected Result]<BR> UE is expected to emergency call before LU,Untested,,,,
+6043,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure LU before CSFB ECC call if LAI is differentbit 0:0:Do not trigger LU before CSFB ECC call if LAI is differentbit 1:1:Do LU before CSFB ECC call if LAI is different",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x0:Do not Configure LU before CSFB ECC call if LAI is different<BR>0x1:Configure LU before CSFB ECC call if LAI is different,,,__ENABLE_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF__,[WCDMA Protocol Baseline]AFR,Modem System Test,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] NA <BR>[Test Step]<BR>1. Register UE in LTE.<BR>2. Perform Emergency call <BR>[Expected Result]<BR>UE is expected to fo LU before making Emergency call if current LAI is different from register LAI.,Pass,,,,
+6044,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure the option to do LU before making a CSFB emergency callbit 0:0:LU not needed before ECCbit 1:1:LU needed before ECC",BIT,1,,1,0x01,NR15.R3.MD700.MP,,"0x00:If disable, UE will behave as per spec<BR>0x01:If enable, UE need to do LU before CSFB emergency call",,,__DISABLE_LU_BEFORE_CSFB_ECC_NEEDED__,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Add the PLMN in LR_BEFORE_CSFB_ECC_PLMN_LIST array in mm_custom_config.c <BR> Boot up the device & UE register in LTE.<BR> [Test Step]<BR> Perform Emergency call & UE perform CSFB to 23G network but with diffrent LA given by network in previous LTE registration.<BR> <BR> [Expected Result]<BR> UE is expected to emergency call before LU,Pass,,,,
6045,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_MANUAL_LIST_DISPLAY_SUITABLE_ONLY,modem_sbp_config[61].SBP_MANUAL_LIST_DISPLAY_SUITABLE_ONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureOnly Display suitable cell for manual listbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
6046,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_MANUAL_MODE_NW_SEL,modem_sbp_config[43].SBP_MANUAL_MODE_NW_SEL,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow changing network selection modebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enable<BR>0:Disable,,,,,,,,Test manual selection mode,Pass,,,,
6047,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_MAPPING_MCC_OTA_INVALID,modem_sbp_config[94].SBP_MAPPING_MCC_OTA_INVALID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable MCC mapping, when MCC in OTA is not validbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disbale,,,,MD Config,Modem - Customer Requirement,,,test in machine<BR>[Init] <BR>Sprint card<BR>machne config a 1xRTT cell with MCC 000<BR>[Test Step] <BR>power on the phone<BR>[Expected Result]<BR>UE register normally,Pass,,,,
@@ -6031,10 +6031,10 @@
6052,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_MDT_OBTAINLOCATION_OPEN_GPS,modem_sbp_config[65].SBP_MDT_OBTAINLOCATION_OPEN_GPS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChoose location info aquiring method for obtainLocation-r11bit 0:0:Use stored locationbit 1:1:Open GPS",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (minutes) <BR> [Init] <BR> [Test Step] <BR> [Expected Result],Pass,,,,
6053,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_MERGE_LAU_AND_ATTACH_EPLMN_LIST,modem_sbp_config[64].SBP_MERGE_LAU_AND_ATTACH_EPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMerge EPLMN list when they are different in LAU_ACCEPT and ATTACH_ACCEPT for the same RPLMNbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
6054,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,modem_sbp_config[100].SBP_MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConvert RAU/Service Reject cause #7 to #111 during CSFBbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:GMM shall convert RAU or Service reject cause #7 to #111 during CSFB<BR>0:GMM shall not convert RAU or Service reject cause #7 to #111 during CSFB,,,__MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR> Test Time (minutes) : 10 mins<BR> [Init] NA<BR> [Test Step ] Perform CSFB Call, & trigger Data services Network send RAU reject #7 <BR> [Expected Result]<BR> UE expected to camp & data services",Pass,,,,
-6055,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustomize T3240 Timeout valuebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,"0x1:If disable, UE support T3240 Timeout value as per spec<BR>0x1:If enable, UE supports Customize T3240 Timeout value",,,__MM_CUSTOMIZE_T3240_TIMEOUT_VALUE__,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G on PLMN 46000F<BR>-> Trigger CS connection release after CS registration is done<BR>->Observe T3212 should run with 12 sec<BR>[Expected Result]<BR>Observe T3212 should run with 12 sec,Untested,,,,
-6056,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow custom ATTACH retry T3311 timer value on RSIM/AKA stackbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x01:Allow custom ATTACH retry T3311 timer value on RSIM/AKA stack .<BR>0x00:Use T3311 value as mentioend in 3GPP spec 24.008,,,__MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM__,VSIM 1.0,SIM,,,Test in machine (Y/N) N<BR>Test Time (minutes) 10 mins <BR>[Init] <BR>Configure MM_CUSTOM_T3311_TIMER_VALUE_ON_AKA_STACK in custom_mm_config.c <BR>[Test Step]<BR>1. Enable RSIM & AKS Stack (virtual card)<BR>2. Perform PS attach request & start T3311<BR>[Expected Result]<BR>Attach retry T3311 timer value based on initial configur value,Untested,,,,
-6057,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,OTA and OTA BY OP,no,no,no,yes,Convert MM/GMM Reject cause based on HPLMN and VPLMN,BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0:If this SBP is disabled, UE will behave as per Network reject cause<BR>1:If this SBP is enabled, MM will convert various reject cause based on cusotmer requirement .",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 15 mins<BR> [Init]<BR> Configure MCF NVRAM_MM_GMM_REJECT_cAUSE_MAPPING_LID {0x04,0x07,46001,46001,0xff,0xff,0xff,0x014,0x00} <BR> [Test Step]<BR> UE perform GMM Attach request on HPLMN( i.e. 46001)& Network send attach reject with cause #7. ( If you want ot use other HPLMN, please update the MCF NVRAM_MM_GMM_REJECT_CAUSE_MAPPING_LID param3, param4. with the respective HPLMN )<BR><BR> <BR> <BR> [Expected Result]<BR> UE convert attach reject cause #7 to reject cause #14 & GPRS is still in service",Untested,,,,
-6058,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger LU after coming to 23g from 4g only if different LAbit 0:0:MM will force LU after inter system change from S1bit 1:1:MM will not force LU after inter system change from S1",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x0:This feature will not trigger LU during inter system change from S1 bit<BR>0x1:This FeatureTrigger LU after coming to 23g from 4g only if different LA .MM will force LU after inter system change from S1bit,,,,[WCDMA Protocol Baseline]IRAT,Modem System Test,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> boot up the device & UE register in LTE <BR> [Test Step]<BR> UE perform IRAT to 23G on same register LA. <BR> <BR> [Expected Result]<BR> UE is expected to trigger LU irrespective of registered LA is same or not,Untested,,,,
+6055,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustomize T3240 Timeout valuebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,"0x1:If disable, UE support T3240 Timeout value as per spec<BR>0x1:If enable, UE supports Customize T3240 Timeout value",,,__MM_CUSTOMIZE_T3240_TIMEOUT_VALUE__,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G on PLMN 46000F<BR>-> Trigger CS connection release after CS registration is done<BR>->Observe T3212 should run with 12 sec<BR>[Expected Result]<BR>Observe T3212 should run with 12 sec,Pass,,,,
+6056,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow custom ATTACH retry T3311 timer value on RSIM/AKA stackbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x01:Allow custom ATTACH retry T3311 timer value on RSIM/AKA stack .<BR>0x00:Use T3311 value as mentioend in 3GPP spec 24.008,,,__MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM__,VSIM 1.0,SIM,,,Test in machine (Y/N) N<BR>Test Time (minutes) 10 mins <BR>[Init] <BR>Configure MM_CUSTOM_T3311_TIMER_VALUE_ON_AKA_STACK in custom_mm_config.c <BR>[Test Step]<BR>1. Enable RSIM & AKS Stack (virtual card)<BR>2. Perform PS attach request & start T3311<BR>[Expected Result]<BR>Attach retry T3311 timer value based on initial configur value,Pass,,,,
+6057,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,OTA and OTA BY OP,no,no,no,yes,Convert MM/GMM Reject cause based on HPLMN and VPLMN,BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0:If this SBP is disabled, UE will behave as per Network reject cause<BR>1:If this SBP is enabled, MM will convert various reject cause based on cusotmer requirement .",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 15 mins<BR> [Init]<BR> Configure MCF NVRAM_MM_GMM_REJECT_cAUSE_MAPPING_LID {0x04,0x07,46001,46001,0xff,0xff,0xff,0x014,0x00} <BR> [Test Step]<BR> UE perform GMM Attach request on HPLMN( i.e. 46001)& Network send attach reject with cause #7. ( If you want ot use other HPLMN, please update the MCF NVRAM_MM_GMM_REJECT_CAUSE_MAPPING_LID param3, param4. with the respective HPLMN )<BR><BR> <BR> <BR> [Expected Result]<BR> UE convert attach reject cause #7 to reject cause #14 & GPRS is still in service",Pass,,,,
+6058,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger LU after coming to 23g from 4g only if different LAbit 0:0:MM will force LU after inter system change from S1bit 1:1:MM will not force LU after inter system change from S1",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x0:This feature will not trigger LU during inter system change from S1 bit<BR>0x1:This FeatureTrigger LU after coming to 23g from 4g only if different LA .MM will force LU after inter system change from S1bit,,,,[WCDMA Protocol Baseline]IRAT,Modem System Test,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> boot up the device & UE register in LTE <BR> [Test Step]<BR> UE perform IRAT to 23G on same register LA. <BR> <BR> [Expected Result]<BR> UE is expected to trigger LU irrespective of registered LA is same or not,Pass,,,,
6059,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_DISABLE_PREVIOUS_RPLMN_FROM_NVRAM,modem_sbp_config[1].SBP_MM_DISABLE_PREVIOUS_RPLMN_FROM_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable to use previous registered PLMN from NVRAM for manual selection modebit 0:0:Turn-off. Use previous RPLMN from NVRAMbit 1:1:Turn-on. Not use previous RPLMN from NVRAM",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
6060,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_DISABLE_RETRY_ABNORMAL_LAI,modem_sbp_config[0].SBP_MM_DISABLE_RETRY_ABNORMAL_LAI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureModem retries abnormal LAI/RAI/TAI when T3212/T3302/T3402 expiry.bit 0:0:Turn-off. Modem retries abnormal LAI/RAI/TAI after 10/15/15 minutesbit 1:1:Turn-on. Modem retries abnormal LAI/RAI/TAI when T3212/T3302/T3402 expiry",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
6061,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_HPPLMN_1ST_ATTEMPT_ENHANCE,modem_sbp_config[0].SBP_MM_HPPLMN_1ST_ATTEMPT_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen the SBP is on, UE will apply the first higher priority scan timer when UE is registered on a VPLMN for \"Power on\", \"Out Of Service\" and \"Manual selection\". If SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER is off , the first higher priority PLMN scan timer will be 2 min.bit 0:0:Turn-off. Do not apply the timer of first higher priority PLMN scanbit 1:1:Turn-on. Apply the timer of first higher priority PLMN scan",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
@@ -6080,7 +6080,7 @@
6101,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_NR_OVERHEATING_ASSISTANCE,modem_sbp_config[104].SBP_NR_OVERHEATING_ASSISTANCE,OTA and OTA BY OP,no,no,no,yes,Configuration of SBP Feature NR Overheating Assistance information,BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disabled<BR>1:Enabled,,,,Option 2,5G Architecture,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF Dump,Pass,,,,
6102,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_NR_SRS_TX_SWITCH,modem_sbp_config[103].SBP_NR_SRS_TX_SWITCH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature NR SRS tx(antenna) switch<BR>0: Not supported<BR>1: Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,0/1,,,,SRS Tx Antenna Switch,MIMO,,,Not required since MP1 feature will not use SBP.,Untested,,,,
6103,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_NVRAM_MAP_EMM_CAUSE,modem_sbp_config[88].SBP_NVRAM_MAP_EMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReject cause mapping by NVRAMbit 0:0:Disable. Follow spec reject cause handlingbit 1:1:Enabled. User can map network reject cause to other reject cause that user want.",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enabled. User can map network reject cause to other reject cause that user want.<BR>0:Disable. Follow spec reject cause handling.,,,__SBP_NVRAM_MAP_EMM_CAUSE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6104,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature Enable to map MM/GMM reject cause to new cause from NVRAM record configured by customerbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"{0x0000 ~0x8000}:mm_msg :: MM/GMM OTA message type applied the reject cause conversion.<BR>{0x00 ~0x0a}:mm_cause :The reject cause was received from the network.<BR>{0x00 ~0xff}:new_cause_on_hplmn:The new reject cause for HPLMN<BR>0xff:reserve1:The field is reserved for the future needs<BR>{0x0~0xf],{0x0~0xf},{0x0~0xf}:camp_on_plmn:The camped PLMN which sent the reject cause.<BR>{0x0-0xf},[0x0-0xf},{{0xf-0xf}:sim_plmn:The PLMN ID derived from IMSI.<BR>0xf:reserve2:The field is reserved for the future needs<BR>{ 0x0~0xff }:reserve3:The field is reserved for the future needs<BR>{0~99} {111}:new_cause_on_vplmn : The new reject cause for VPLMN",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Configure NVRAM_EF_MM_GMM_REJECT_CAUSE_MAPPING_LID to {2561,7,[0x20,0x60,0x1f],[255,255,255],255,255,255,111,14},<BR><BR> Boot up the device & UE send attach request in 23G.<BR> [Test Step]<BR> Network send attach reject with cause #7. <BR> <BR> [Expected Result]<BR> UE is expected toconvert cause #7 to cause #14 & GPRS remain in service.",Untested,,,,
+6104,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature Enable to map MM/GMM reject cause to new cause from NVRAM record configured by customerbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"{0x0000 ~0x8000}:mm_msg :: MM/GMM OTA message type applied the reject cause conversion.<BR>{0x00 ~0x0a}:mm_cause :The reject cause was received from the network.<BR>{0x00 ~0xff}:new_cause_on_hplmn:The new reject cause for HPLMN<BR>0xff:reserve1:The field is reserved for the future needs<BR>{0x0~0xf],{0x0~0xf},{0x0~0xf}:camp_on_plmn:The camped PLMN which sent the reject cause.<BR>{0x0-0xf},[0x0-0xf},{{0xf-0xf}:sim_plmn:The PLMN ID derived from IMSI.<BR>0xf:reserve2:The field is reserved for the future needs<BR>{ 0x0~0xff }:reserve3:The field is reserved for the future needs<BR>{0~99} {111}:new_cause_on_vplmn : The new reject cause for VPLMN",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Configure NVRAM_EF_MM_GMM_REJECT_CAUSE_MAPPING_LID to {2561,7,[0x20,0x60,0x1f],[255,255,255],255,255,255,111,14},<BR><BR> Boot up the device & UE send attach request in 23G.<BR> [Test Step]<BR> Network send attach reject with cause #7. <BR> <BR> [Expected Result]<BR> UE is expected toconvert cause #7 to cause #14 & GPRS remain in service.",Pass,,,,
6105,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_NWSEL_BACKUP_RPLMN_IN_AUTO_MODE,modem_sbp_config[16].SBP_NWSEL_BACKUP_RPLMN_IN_AUTO_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThe UE backups previous RPLMN when receiving network reject or abnormal cases.bit 0:0:Turn-off. Not backup previous RPLMNbit 1:1:Turn-on. Backup previous RPLMN",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
6106,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_NWSEL_CUSTOMIZE_EHPLMN,modem_sbp_config[34].SBP_NWSEL_CUSTOMIZE_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNWSEL uses customized EHPLMN for network selection.bit 0:0:Turn-off. Do not use customized EHPLMNbit 1:1:Turn-on. Use customized EHPLMN for network selection",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
6107,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_NWSEL_DISABLE_STORED_RPLMN_FROM_NVRAM,modem_sbp_config[73].SBP_NWSEL_DISABLE_STORED_RPLMN_FROM_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable to use stored registered PLMN from NVRAM for manual selection modebit 0:0:Turn-off. Use stored RPLMN from NVRAMbit 1:1:Turn-on. Not use stored RPLMN from NVRAM",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
@@ -6169,7 +6169,7 @@
6190,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_REJ_13_SEARCH_NEXT_BEFORE_OTHER_LA_OR_TA,modem_sbp_config[63].SBP_REJ_13_SEARCH_NEXT_BEFORE_OTHER_LA_OR_TA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo search other PLMNs after UE receives reject cause #13bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
6191,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_REL10_LTE_PS_ACC_CONGESTION,modem_sbp_config[33].SBP_REL10_LTE_PS_ACC_CONGESTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDecide behavior of EPS only result with cause #22bit 0:0:Disable. Follow R11 behavior for eps only result with cause #22bit 1:1:Enabled. Follow R9/R10 behavior for eps only result with cause #22",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Enabled. Follow R9/R10 behavior for eps only result with cause #22.<BR>0:Disable. Follow R11 behavior for eps only result with cause #22.,,,__REL10_LTE_PS_ACC_CONGESTION__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
6192,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_RELEASE_PS_CONN_FOR_EUTRAN_UPDATE,modem_sbp_config[8].SBP_RELEASE_PS_CONN_FOR_EUTRAN_UPDATE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRelease PS connection for EUTRAN updatebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:NAS shall not release PMM connection when EUTRAN capablity is changes<BR>1:NAS shall release PMM connection when EUTRAN capability is changed.,,,__RELEASE_PS_CONN_FOR_EUTRAN_UPDATE__,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6193,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRelease RRC connection locally after first expiry of T3380bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0x1:If enable, After 5 expiry of T3380 PDP activation timer, MS shall trigger SCRI",,,__RELEASE_RRC_CONNECTION _LOCALLY_AFTER_T3380_FIFTH_EXPIRY__,[WCDMA Protocol Baseline]PDP_Management,Modem System Test,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G <BR>-> Trigger connection release from SM<BR>-> If N/W does not release the RRC connection then MM will send the force connection release req to RRCE to release the RRC connection<BR>[Expected Result]<BR>MM will send the force connection release req to RRCE to release the RRC connection,Untested,,,,
+6193,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRelease RRC connection locally after first expiry of T3380bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0x1:If enable, After 5 expiry of T3380 PDP activation timer, MS shall trigger SCRI",,,__RELEASE_RRC_CONNECTION _LOCALLY_AFTER_T3380_FIFTH_EXPIRY__,[WCDMA Protocol Baseline]PDP_Management,Modem System Test,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G <BR>-> Trigger connection release from SM<BR>-> If N/W does not release the RRC connection then MM will send the force connection release req to RRCE to release the RRC connection<BR>[Expected Result]<BR>MM will send the force connection release req to RRCE to release the RRC connection,Pass,,,,
6194,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_REL_12_EPLMN_LIST_HANDLING,modem_sbp_config[29].SBP_REL_12_EPLMN_LIST_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRel-12 conformance not to delete equivalent PLMN list for #9,#10 and #40 RAU/TAU procedure.bit 0:0:Disabled. Delete EPLMN list when receiving #9, #10 or #40bit 1:1:Enabled. Do not delete EPLMN list when receiving #9, #10 or #40",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
6195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,modem_sbp_config[61].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureForce PS release during PLMN list Req on PDP Deactivatebit 0:0:During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivatedbit 1:1:During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated",BIT,1,,1,0x01,NR15.R3.MD700.MP,,"1:During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated<BR>0:During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivated",,,__SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,[WCDMA Protocol Baseline]PLMNList,Modem System Test,,,Test in machine (Y/N) : N<BR> Test Time (minutes) :NA<BR> [Init] <BR> [Test Step]<BR> 1. Perform PDP deactivation <BR> 2. Network not send RRC connection release <BR> [Expected Result]<BR> 3. UE send SCRI after 10 secs,Pass,,,,
6196,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_REMOVE_BLACK_CELLS_FROM_REDIR_LIST,modem_sbp_config[73].SBP_REMOVE_BLACK_CELLS_FROM_REDIR_LIST,OTA and OTA BY OP,no,no,no,yes,"In some scenarios, when UE perform CSFB call the best GSM cell is a bad cell that the network will not response the call after the location update procedure. This feature is for customer to control whether UE will remove the black cells from redirection list to skip camp on those cells for CSFB call.",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enable. UE will remove the black cells from redirection list.<BR>0:Disable. UE will not remove the black cells from redirection list.,,,__DISABLE_REMOVE_BLACK_CELLS_FROM_REDIR_LIST__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
@@ -8451,46 +8451,46 @@
8531,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",inactive_timer_length,inactive_timer_length,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized timer length of dataInactive timer T3 for smart idle feature,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,0x0: Not supported<BR>0x1: Supported,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): Less than 5 minutes<BR>[Init] LTE load + internal phone + Test SIM<BR>[Test Step] Power on, 4G registration is completed.<BR>[Expected Result] Check this field in UE-EUTRA-Capability is matched as your MCF setting.",Pass,,,,
8532,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",inactive_timer_length_DRX,inactive_timer_length_DRX,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]CCustomized timer length of dataInactive timer T3 while DRX configured for smart idle feature,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.MP,,0x0: Not supported<BR>0x1: Supported,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): Less than 5 minutes<BR>[Init] LTE load + internal phone + Test SIM<BR>[Test Step] Power on, 4G registration is completed.<BR>[Expected Result] Check this field in UE-EUTRA-Capability is matched as your MCF setting.<BR>",Pass,,,,
8536,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_nr_incall_ho_enable,ipol_ans_cfg.ipol_ims_nr_incall_ho_enable,OTA and OTA BY OP,no,no,no,no,"[MCF]When disable, UE won't perform handover between NR and WLAN during on-going IMS call<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,Test in machine (Y/N)<BR>Test Time (0.5)<BR>[Init]<BR>NR attached and WiFi calling ongoing<BR>[Test Step]<BR>WiFi RSSI decreases<BR>[Expected Result]<BR>VoWiFi icon on,Pass,,,,
-8537,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8538,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8539,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8540,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8541,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8542,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8543,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8544,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8545,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8546,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8547,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8548,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8549,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8550,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8551,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8552,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8553,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8554,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8555,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8556,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8557,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8558,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8559,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8560,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8561,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8562,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8563,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8564,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8565,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8566,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8567,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8568,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8569,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8570,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8571,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8572,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8573,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8574,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8575,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8576,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,,,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8537,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8538,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8539,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8540,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8541,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8542,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8543,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8544,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8545,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8546,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8547,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8548,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8549,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8550,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8551,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8552,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8553,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8554,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8555,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8556,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8557,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8558,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8559,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8560,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8561,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8562,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8563,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8564,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8565,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8566,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8567,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8568,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8569,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8570,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8571,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8572,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8573,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8574,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8575,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8576,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
8577,59715,NVRAM_EF_L1_SAR_TX_BACKOFF_DB_CUSTOM_PARAMES_LID,1,power_decrement,SAR_RF_STATE[0~19].power_decrement,OTA,no,no,yes,no,[MCF]settings for adjusting tx power offset accurately for multi slot and SAR enabled,INT,1536,"4,12,2,4",,0,NR15.R3.MD700.MP,,>=0,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
8578,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,en_force_dpd_default_lut,normal_otfc.en_force_dpd_default_lut,OTA,no,no,yes,no,normal otfc,ENUM,1,,,0,NR15.R3.MD700.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
8579,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,reserved,normal_otfc.reserved,OTA,no,no,yes,no,normal otfc,ENUM,1,,,0,NR15.R3.MD700.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
@@ -8618,7 +8618,7 @@
8717,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",inactivity_timer_length_drx,smart_idle.inactivity_timer_length_drx,OTA and OTA BY OP,no,no,no,no,"Data inactivity timer length, when long DRX is configured.",UNSIGNED SHORT,2,,,300,NR15.R3.MD700.MP,,120:int: 10~600,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8718,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].REMOVE_CLIR_PLUS_PREFIX,modem_sbp_config[109].REMOVE_CLIR_PLUS_PREFIX,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable remove the CLIR and plus prefix of call number in +ECPI URC, if these prefix exist.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR> Initial Condition:<BR>1. VoLTE enable;<BR>2. carrier support DDD;<BR>3. ims parameter enable_ddd_feature =1<BR>4. enable the para REMOVE_CLIR_PLUS_PREFIX in make file<BR>Detailed Steps:<BR>Make a call to a long distance number.( like '#31#' + call number)<BR>[Expected Result]<BR>display call number info without '+' and '#31#' in phone UI.,Untested,,,,
8719,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_1XRTT_SYNC_MEID_FROM_IMEI,modem_sbp_config[109].SBP_1XRTT_SYNC_MEID_FROM_IMEI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable 1xRTT sync MEID from IMEI<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x01::enable<BR>0x00::disable,,,,1xRTT,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] Try to write IMEI to DUT<BR>[Expected Result] The MEID of DUT sync from IMEI,Pass,,,,
-8720,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,This is an enhncement over existing 2G STORED SI feature. <BR>When this SBP is enabled first decode SI3 to check if cell is suitable to camp. Only if suitable proceed to use STORED SI.,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Stored SI enhancement is enabled<BR>0:Stored SI enhancement is disabled,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8720,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,This is an enhncement over existing 2G STORED SI feature. <BR>When this SBP is enabled first decode SI3 to check if cell is suitable to camp. Only if suitable proceed to use STORED SI.,BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:Stored SI enhancement is enabled<BR>0:Stored SI enhancement is disabled,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8721,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE,modem_sbp_config[113].SBP_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not release PS signalling connection at T3340 expiry<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,0x01:Do not release PS signalling connection at T3340 expiry by sending SCRI when RAB is active<BR>0x00:Release PS signalling connection at T3340 expiry by sending SCRI when RAB is active,,,__SBP_DISABLE_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE__,,,,,"Test in machine (Y/N) :Y<BR> Test Time (minutes) : 10 mins <BR> [Init] DUT boot up <BR> [Test Step] <BR> 1) UE has established PS services.<BR> 2) When RAB is still established, T3340 expires. <BR> 3)UE doesnot send SCRI when SBP is enabled.",Pass,,,,
8722,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_3G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,modem_sbp_config[113].SBP_3G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable 3G4G_PINGPONG_REDUCTION <BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
8723,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_5GMM_DISABLE_PARTIAL_CIPHER,modem_sbp_config[108].SBP_5GMM_DISABLE_PARTIAL_CIPHER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable the partial cipher feature when sending initial NAS message<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0/1:Value 0 means UE support partial ciphering, which is spec behavior<BR>Value 1 means UE disable partial ciphering, which turn-off that functionality of partial ciphering",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) about 10 minutes<BR>[Init] <BR>Test under 5G SA coverage<BR>[Test Step]<BR>Turn on this SBP and leave flight mode do initial Registration in 5G SA,<BR>Check that VGMM won't do partial ciphering for REGISTRATION_REQUEST<BR>[Expected Result]<BR>VGMM won't do partial ciphering for REGISTRATION_REQUEST",Untested,,,,
@@ -8643,13 +8643,13 @@
8742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_ENHANCE_PENDING_ECC_CALL_ON_PLMN_SEARCH,modem_sbp_config[112].SBP_ENHANCE_PENDING_ECC_CALL_ON_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable Enhance pending ECC call on PLMN Search <BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1:UE perfrom ECC call<BR>0:UE will not perform ECC call,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
8743,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL,modem_sbp_config[110].SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Abort call when eps only cause 18 and CSFB not preferred<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
8744,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EXSR_REJ_FOR_C2K_NO_TAU,modem_sbp_config[110].SBP_EXSR_REJ_FOR_C2K_NO_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Don't perform TAU if Extended Service Reject for C2K CSFB<BR>bit 0:0:Perform TAU<BR>bit 1:1:Don't perform TAU",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:disbale,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EXSR_REJ_FOR_C2K_NO_TAU.<BR>[Test Step]<BR>1. Register to an operator which<BR> - Support CDMA2000<BR> - Its LTE network does not support ESR to C2K<BR>2. Trigger a 1xCS call on LTE, the UE would send ESR to the NW<BR>3. Expect NW reject the ESR by Service Reject<BR>4. The UE searchs CDMA2000 NW directly, find a suitable cell and call is successfully proceeded<BR>5. The UE shall go back to LTE NW. In this case, the UE should not trigger TAU<BR>[Expected Result]<BR>UE should not trigger TAU",Untested,,,,
-8745,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,During Manual PLMN LIST GAS will read both SI3 and SI4 . Initially only SI3 was read for PLMN LIST,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:GAS will read both SI3 and SI4 during PLMN List procedure<BR>0:GAS will read only SI3 during PLMN List procedure,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8745,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,During Manual PLMN LIST GAS will read both SI3 and SI4 . Initially only SI3 was read for PLMN LIST,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:GAS will read both SI3 and SI4 during PLMN List procedure<BR>0:GAS will read only SI3 during PLMN List procedure,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8746,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_HANDLE_MT_SMS_FROM_DIFF_DOMAIN,modem_sbp_config[110].SBP_HANDLE_MT_SMS_FROM_DIFF_DOMAIN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>handle MT SMS from different domain at the same time<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit:0/1,,,,,,,,"Test in machine (Y) <BR> Test Time (5 minutes) <BR> [Init] <BR> ims registered<BR> [Test Step] <BR> 1.send IMS MT SMS to UE<BR> 2.before AP ack IMS MT SMS to modem, send SGs MT SMS to UE<BR> [Expected Result]<BR> check UE can receive the IMS MT SMS and SGs MT SMS normally",Pass,,,,
8747,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_IGNORE_2G_CB_DUP_CHECK,modem_sbp_config[112].SBP_IGNORE_2G_CB_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] <BR>Configuration of SBP Feature "Disable duplicate CB check for received CB message"<BR>bit 0::Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8748,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_IGNORE_3G_CB_DUP_CHECK,modem_sbp_config[114].SBP_IGNORE_3G_CB_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable duplicate CB check for received CB message for 3G<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,SBP_IGNORE_3G_CB_DUP_CHECK This feature is valid incase the SBP is 1 else it is not,,,No,MD Config,Modem - Customer Requirement,,,[Test Steps]<BR>1. Switch on the mobile.<BR>2. Let the mobile go to Idle mode.<BR>3. Send CB message.<BR>4. Send the same CB message again<BR><BR>[Expected Result]<BR>When this feature is enabled both these messages has to be received,Pass,,,,
8749,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE,modem_sbp_config[109].SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>No IMS REG ongoing<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
8750,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_INACTIVE_MODE_SERVICE_RECOVERY_GMSS_CONTROL,modem_sbp_config[108].SBP_INACTIVE_MODE_SERVICE_RECOVERY_GMSS_CONTROL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>OOS recovery when GMSS control<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-8751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,OTA and OTA BY OP,no,no,no,yes,This SBP will control if 2G should indicate GL1 to increase priority of current channel when more than 2 bad blocks are received.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Increase the priority after two bad blocks<BR>0:Follow old design,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,OTA and OTA BY OP,no,no,no,yes,This SBP will control if 2G should indicate GL1 to increase priority of current channel when more than 2 bad blocks are received.,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Increase the priority after two bad blocks<BR>0:Follow old design,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8752,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_CUSTOMIZATION,modem_sbp_config[108].SBP_KOR_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
8753,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_KSC5601_READ,modem_sbp_config[108].SBP_KOR_KSC5601_READ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR KSC5601 READ customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): N<BR>Test Time (minutes) : 20 minute<BR>[Init]<BR>Alpha ID field of EF_ADN has KSC5601 Character Set and data<BR>[Test Step]<BR>1. Insert SIM that has KSC5601 character set in EF_ADN<BR>2. boot DUT<BR>3. read in Contact APP<BR><BR>[Expected Result],Untested,,,,
8754,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_KSC5601_WRITE,modem_sbp_config[108].SBP_KOR_KSC5601_WRITE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR KSC5601 WRITE customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
@@ -8663,7 +8663,7 @@
8762,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_SIGNAL_REPORT_BY_CUSTOMIZED_THRESHOLD,modem_sbp_config[111].SBP_SIGNAL_REPORT_BY_CUSTOMIZED_THRESHOLD,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Signal report by customized threshold<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0:Default value. Disable this SBP.<BR>1:The signal report frequency can be reduced based on the specified thresholds. Yet, other applications which heavily rely on accurate signal power report can behave belatedly.",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8763,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_SIM_DETACH_WAIT_FOR_IMS_DEREG,modem_sbp_config[109].SBP_SIM_DETACH_WAIT_FOR_IMS_DEREG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Hold SIM detach until IMS deregistered<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable this SBP.<BR>[Test Step]<BR>Flight mode on/off and wait IMS registers successfully.<BR>Then, plug out the SIM card.<BR>[Expected Result]<BR>After IMS deregisters completed and UE perform detach request(e.g. send detach request to NW).",Pass,,,,
8764,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_SNIFFER_IN_VIRTUAL_MODE,modem_sbp_config[112].SBP_SNIFFER_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Continue sniffer in virtual mode<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.MP,,0/1:0:Disable<BR>1:Enable,,,This feature will be enabled when __SBP_SNIFFER_IN_VIRTUAL_MODE__ is enabled,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10-15<BR>[Init] Dual SIM, Initially camp on 3G<BR>[Test Step] UE should go OOS on one SIM and trigger sniffer, another should be in connected mode<BR>[Expected Result] If SBP_SNIFFER_IN_VIRTUAL_MODE is 1, even in virtual mode in SIM1 sniffer should continue",Untested,,,,
-8765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,OTA and OTA BY OP,no,no,no,yes,Gaming performance improvement to not read SI2Q in Virtual Idle,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Do not read SI2Q in virtual mode<BR>0:Read SI2Q in virtual mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,OTA and OTA BY OP,no,no,no,yes,Gaming performance improvement to not read SI2Q in Virtual Idle,BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Do not read SI2Q in virtual mode<BR>0:Read SI2Q in virtual mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8766,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_TC01_SHORT_T3240_FOR_ECC,modem_sbp_config[109].SBP_TC01_SHORT_T3240_FOR_ECC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Using short T3240 timer value<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8767,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_USE_MM_INTERNAL_T3212_PERIOD_SETTING,modem_sbp_config[112].SBP_USE_MM_INTERNAL_T3212_PERIOD_SETTING,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use MM internal T3212 period setting<BR>bit 0:0:MM shall use the T3212 value provided by network from SIB1 message<BR>bit 1:1:If the T3212 value provided by network in SIB1 message is greater than 2hrs, MM shall keep the T3212 timer value as 2hrs",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0x01:If the T3212 value provided by network in SIB1 message is greater than 2hrs, MM shall keep the T3212 timer value as 2hrs<BR>0x00:MM shall use the T3212 value provided by network from SIB1 message",,,__SBP_ENABLE_USE_MM_INTERNAL_T3212_PERIOD_SETTING__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) :10 mins<BR>[Init] DUT boot up<BR>[Test Step]<BR>> Trigger Registration in 3G for CS domain<BR>> Once registration is successful then see T3212 starts and <BR> observe the time value,Pass,,,,
8768,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_VONR_ENH,modem_sbp_config[109].SBP_VONR_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When IMS CALL ongoing, need IMS response to judge whether performing CSFB or not<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,NR RRC VoNR Enhancement - Paging receiving ratio _ NR occupying rate _ HO enhancement,MTK Proprietary,,,,Untested,,,,
@@ -8757,7 +8757,7 @@
8858,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_update_retry_upper_limit,ua_config.mo_update_retry_upper_limit,OTA and OTA BY OP,no,no,no,no,"This is the upper limit for UPDATE retry times if continously received 500 Server Internal Err during MO call establishment<BR>If less than 0, means no upper limit<BR>If equal or bigger than 0, means UA will retry UPDATE at most X times (X is the configured value)<BR>",INT,4,,,0xFFFFFFFF,NR15.R3.MD700.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine<BR>[Init] IMS Register on 4G<BR>[Test Step]<BR>1) make mo call<BR>2) ss side always reply 500 for UPDATE sent from UE during mo call establishment<BR>[Expected Result]<BR>UE cancel call after retry UPDATE for x times (x equal to the configuration value),Pass,,,,
8859,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_if_488_no_sdp,ua_config.retry_ims_voice_if_488_no_sdp,OTA and OTA BY OP,no,no,no,no,"When making a MO video call and receive 488 without SDP, retry IMS voice directly by IMS UA<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Test in machine<BR>[Init] IMS Register on 4G<BR>[Test Step]<BR>1) make mo video call<BR>2) ss side reply 488 without sdp<BR>[Expected Result]<BR>UE will automatically retry mo voice call,Pass,,,,
8860,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_if_488_no_sdp.retry_ims_voice_if_488_no_sdp,ua_config.retry_ims_voice_if_488_no_sdp.retry_ims_voice_if_488_no_sdp,Not Support,no,no,no,no,"[MCF]<BR>When making a MO video call and receive 488 without SDP, retry IMS voice directly by IMS UA<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.MP,,0:0,,,,,,,,,Untested,,,,
-8861,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>2G PLMN list speed mode enhancement<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit:0:2G PLMN list speed mode enhancement OFF<BR>1:2G PLMN list speed mode enhancement ON,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8861,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>2G PLMN list speed mode enhancement<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit:0:2G PLMN list speed mode enhancement OFF<BR>1:2G PLMN list speed mode enhancement ON,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8862,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_C2K_MOBTERMMAP_SVC_PROTECT,modem_sbp_config[117].SBP_C2K_MOBTERMMAP_SVC_PROTECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use the MobTermMaps in UIM.<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x01:enable<BR>0x00:disable,,,,[C2K Protocol Baseline]1xRTT_Register,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_CONSIDER_NON_DATA_SIM_LOCAL_REL_TAU_AS_RECOVERY_TAU,modem_sbp_config[117].SBP_CONSIDER_NON_DATA_SIM_LOCAL_REL_TAU_AS_RECOVERY_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Consider local release TAU as sync recovery TAU on non-Data SIM.<BR>bit 0:0:Disabled. Local release TAU not same as sync recovery TAU.<BR>bit 1:1:Enabled. Local release TAU is same as sync recovery TAU.",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,[LTE Protocol Baseline]EMM_REG,Modem System Test,,,,Untested,,,,
8864,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_CTCH_OVER_PLMN_ENABLED,modem_sbp_config[118].SBP_CTCH_OVER_PLMN_ENABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>not enable the function to check if ctch preffered over plmn.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.MP,,0:Not Enabled<BR>1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Test in machine : Y<BR>Test Time : 10 mins<BR>[Init] SINGLE SIM case with 3G as active RAT<BR>[Test Step] 1.Set up CBS with periodicity small (eg:4)<BR> 2.Switch OFF and switch ON 'Automatically Select network' option in Network <BR> settings<BR> 3.Using NVRAM enable and disable SBP to check the result<BR>[Expected Result] If enabled PLMN will be completed in the expected duration,Untested,,,,
@@ -8778,7 +8778,7 @@
8879,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_SEND_POLL_ON_VRB_SHORTAGE,modem_sbp_config[118].SBP_SEND_POLL_ON_VRB_SHORTAGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To Enable the feature of Poll sending, based on VRB status<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0~1:This SBP is used to trigger sending of POLL when VRB FULL, to avoid stall.",,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
8880,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_SKIP_EMC_REJECT_WHEN_EMC_BS_FALSE_SIB_SUPPORT_IMS_EMC,modem_sbp_config[116].SBP_SKIP_EMC_REJECT_WHEN_EMC_BS_FALSE_SIB_SUPPORT_IMS_EMC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not send EMC_ATTACH_REJ or EMC_DATA_FAIL_IND when EMC_BS not supported, but cell support IMS EMC.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,,,,,[LTE Protocol Baseline]EMM_REG,Modem System Test,,,,Untested,,,,
8881,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_STORE_MEID_ESN_ERROR,modem_sbp_config[118].SBP_STORE_MEID_ESN_ERROR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Only try once when store esn command fail for special card is turned off.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:only try store esn once,,,,[C2K Protocol Baseline]C2K_UIM,Modem System Test,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]using a card which can't store esn successfully<BR>[Test Step]insert card and boot up phone<BR>[Expected Result]phone boot up and register to network normally,Untested,,,,
-8882,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>allow TCM request authentication even when username or password is empty<BR>bit 0:0:not allow<BR>bit 1:1:allow",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:allow for TCM to request authentication even when username or password is empty<BR>0:not allow for TCM to request authentication even when username or password is empty,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (5 minutes)<BR>[Init]<BR>[Test Step] using cgauth to set null username/password<BR>[Expected Result] check when value is 0, UE won't requset PAP or CHAP, if 1, requset",Untested,,,,
+8882,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>allow TCM request authentication even when username or password is empty<BR>bit 0:0:not allow<BR>bit 1:1:allow",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:allow for TCM to request authentication even when username or password is empty<BR>0:not allow for TCM to request authentication even when username or password is empty,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (5 minutes)<BR>[Init]<BR>[Test Step] using cgauth to set null username/password<BR>[Expected Result] check when value is 0, UE won't requset PAP or CHAP, if 1, requset",Pass,,,,
8883,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_USE_SUGGESTED_RACH_BAR_PARA,modem_sbp_config[117].SBP_USE_SUGGESTED_RACH_BAR_PARA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Turn on to enable overwrite RACH bar parameter for testSIM or FTA<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit:0/1:Turn on to enable overwrite RACH bar parameter for testSIM or FTA<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,LTE Protocol (R9 Baseline),4G,,,,Untested,,,,
8884,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[80].SBP_DATA_HPPLMN_SEARCH_TIMER,modem_sbp_data_config[80].SBP_DATA_HPPLMN_SEARCH_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>higher-priority PLMN search timer value<BR>bit 1:1:1 minutes<BR>bit 2:2:2 minutes<BR>bit 3:3:3 minutes<BR>bit 4:4:4 minutes<BR>bit 5:5:5 minutes<BR>bit 6:6:6 minutes<BR>bit 7:7:7 minutes<BR>bit 8:8:8 minutes<BR>bit 9:9:9 minutes<BR>bit 10:10:10 minutes<BR>bit 11:11:11 minutes<BR>bit 12:12:12 minutes<BR>bit 13:13:13 minutes<BR>bit 14:14:14 minutes<BR>bit 15:15:15 minutes<BR>bit 16:16:16 minutes<BR>bit 17:17:17 minutes<BR>bit 18:18:18 minutes<BR>bit 19:19:19 minutes<BR>bit 20:20:20 minutes<BR>bit 21:21:21 minutes<BR>bit 22:22:22 minutes<BR>bit 23:23:23 minutes<BR>bit 24:24:24 minutes<BR>bit 25:25:25 minutes<BR>bit 26:26:26 minutes<BR>bit 27:27:27 minutes<BR>bit 28:28:28 minutes<BR>bit 29:29:29 minutes<BR>bit 30:30:30 minutes<BR>bit 255:255:255 minutes",BIT,8,,8,0x00,NR15.R3.MD700.MP,,1~255:minutes,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
8885,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[84].SBP_EMM_R15_SET_RAT_NO_DETACH_BY_LIST,modem_sbp_data_config[84].SBP_EMM_R15_SET_RAT_NO_DETACH_BY_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>decide the list for detach-required detection in SET_RAT procedure<BR>bit 0:0:the default EMM_RATBAND_DETACH_ALGORM_1<BR>bit 1:1:if old/new_rat_mode includes LTE, perform detach by refering to balcklist.<BR>bit 2:2:if old/new_rat_mode includes LTE, NOT perform detach by refering to whitelist.",BIT,8,,8,0x01,NR15.R3.MD700.MP,,"2:if old/new_rat_mode setting includes LTE, NOT perform detach by referring to white list<BR>0:disable whitelist/blacklist, the detach algo is EMM_RATBAND_DETACH_ALGORM_1<BR>1:if old/new_rat_mode setting includes LTE, perform detach by referring to blacklist",,,,MD Config,Modem - Customer Requirement,,,SET RAT procedure,Pass,,,,
@@ -8878,8 +8878,8 @@
9491,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",max_volte_ssac_retry_num,profile_normal.general_setting_normal.max_volte_ssac_retry_num,OTA BY OP,no,no,no,yes,"OPPO requirement,Maximum number of ssac reselect retry number for volte call",UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.MP,,0-255:Maximum number of ssac reselect retry number for volte call,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Pass,,,,
9521,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_ENABLE_CUSTOM_TRESEL_THRESHOLD_FOR_LTE_CELL,modem_sbp_config[121].SBP_ENABLE_CUSTOM_TRESEL_THRESHOLD_FOR_LTE_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Custom Treselection Threshold decrease for LTE cells<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0,1:0 - False, 1 - True",,,,[LTE Protocol Baseline]Cell_Reselection,Modem System Test,,,,Untested,,,,
9522,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_SIM_INVALID_CAUSE_MAP_LIMIT,modem_sbp_config[121].SBP_EMM_SIM_INVALID_CAUSE_MAP_LIMIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Limit the consecutive attempts of mapping SIM invalid cause<BR>bit 0:0:Not limit<BR>bit 1:1:Limit<BR><BR>purpose: <BR>For an arrearage SIM, if network gives SIM invalid cause like #3, #6, #7, or #8 but UE maps these cause to non-SIM invalid cause like #15, it will causes more PLMN search procedure than expected on an arrearage SIM. Hence, to avoid power consumption issue, this is provided to control whether limit the consecutive attempts invalid cause mapping when one is received in LTE Attach Reject.<BR><BR>use timing:<BR>LTE attach reject cause handling<BR><BR>how to use:<BR>0: Don't limit the consecutive attempts of mapping SIM invalid cause<BR>1: Limit the consecutive attempts of mapping SIM invalid cause",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Don't limit the consecutive attempts of mapping SIM invalid cause.<BR>1:Limit the consecutive attempts of mapping SIM invalid cause.,,,,[LTE Protocol Baseline]EMM_REG,Modem System Test,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] set NVRAM value to 1<BR>[Test Step]<BR>3 consecutvie LTE Attach Reject with cause #3, #6, #7, or #8.<BR>[Expected Result]<BR>Check if DUT won't perform Attach procedure after 3rd LTE Attach Reject",Pass,,,,
-9523,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",ssac_rsrp_resel_th,ssac_rsrp_resel_th,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized RSRP threshold for SSAC cell reselection. (qdBm),SHORT,2,,,0x00,NR15.R3.MD700.MP,,0 to -550,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-9524,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",ssac_rsrq_resel_th,ssac_rsrq_resel_th,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized RSRQ threshold for SSAC cell reselection. (qdB),SHORT,2,,,0x00,NR15.R3.MD700.MP,,0 to -100,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+9523,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",ssac_rsrp_resel_th,ssac_rsrp_resel_th,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized RSRP threshold for SSAC cell reselection. (qdBm),SHORT,2,,,0x00,NR15.R3.MD700.MP,,0 to -550,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+9524,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",ssac_rsrq_resel_th,ssac_rsrq_resel_th,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized RSRQ threshold for SSAC cell reselection. (qdB),SHORT,2,,,0x00,NR15.R3.MD700.MP,,0 to -100,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
9525,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_hysteresis_interval,imc_config.oos_hysteresis_interval,OTA and OTA BY OP,no,no,no,no,"Hysteresis timer interval used for filtering short OOS/Out Of Service perios.<BR>OOSes shorter than the value are not indicated to IMCB, IMS REG and IMS UAs.<BR>Has an impact to OOS related parameters/features, for example, rereg_in_oos_end and oos_end_reset_tcp_client.<BR>unit: ms<BR>",UNSIGNED INT,4,,,1000,NR15.R3.MD700.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init] IMS registered in network which has "rereg_in_oos_end" setting enabled<BR>[Test Step] Cause AS re-establishments<BR>[Expected Result] Short AS re-establishment OOSes don't cause IMS registration refreshes,Pass,,,,
9526,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_CUSTOMIZE_EHPLMN_BY_ICCID_FOR_ISSUE_SIM,modem_sbp_config[121].SBP_CUSTOMIZE_EHPLMN_BY_ICCID_FOR_ISSUE_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Add corresponding PLMN to EHPLMN by judge ICCID for issue SIM whose EHPLMN is set wrongly.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,This is SBP so RD IT/UT is enough,Pass,,,,
9527,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_REJ_111_INC_ATTEMPT_CNT,modem_sbp_config[121].SBP_EMM_REJ_111_INC_ATTEMPT_CNT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When UE receiving attach/tau reject #111, UE increases the attach/tracking area updating attempt counter<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:disable.,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EMM_REJ_111_INC_ATTEMPT_CNT<BR>[Test Step]<BR>1. Power on and UE sent Attach request.<BR>2. NW sent Attach reject #111<BR>[Expected Result]<BR>After receving attach reject#111, UE started T3411(10s) and re-sent Attach request. when timeout.",Untested,,,,
@@ -8888,7 +8888,7 @@
9530,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_delay_target_unhold,ua_config.ect_delay_target_unhold,OTA and OTA BY OP,no,no,no,no,Delay target unhold and +ECT URC final response sending if target has been held but a BYE from transferee is received before ECT has completed (sipfrag 200 OK has been received).<BR>If transfer target call release is received before timeout then send +ECT URC with ok status<BR>Default value 0 seconds<BR>,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,0-254:Timeout value in seconds. <BR>0: Don't start the timer,,,ect_enable,IMS,IMS,,,Test in machine Y<BR>Test Time (minutes) Y<BR>[Init]<BR>UE VoLTE registered<BR>[Test Step]<BR>Make VoLTE call to UeB.<BR>Make VoLTE call to UeC.<BR>Make Explicit Call Transfer<BR>[Expected Result]<BR>Explicit Call Transfer succeeds,Untested,,,,
9531,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_delay_target_unhold.ect_delay_target_unhold,ua_config.ect_delay_target_unhold.ect_delay_target_unhold,Not Support,no,no,no,no,Timeout value to delay target unhold and +ECT URC final response sending if target has been held but a BYE from transferee is received before ECT has completed. Unit: seconds.<BR>0: "Don't start the timer",BIT,8,,8,0x00,NR15.R3.MD700.MP,,0-254:Timeout value in seconds. <BR>0: Don't start the timer,,,ect_enable,IMS,IMS,,,Test in machine Y<BR>Test Time (minutes) Y<BR>[Init]<BR>UE VoLTE registered<BR>[Test Step]<BR>Make VoLTE call to UeB.<BR>Make VoLTE call to UeC.<BR>Make Explicit Call Transfer<BR>[Expected Result]<BR>Explicit Call Transfer succeeds,Untested,,,,
9532,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_DISABLE_SS_WHEN_DATA_OFF,modem_sbp_config[121].SBP_DISABLE_SS_WHEN_DATA_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Control if implementing SS when data off<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR> Test Time (minutes) 1 min<BR> [Init]<BR> enable SBP_DISABLE_SS_WHEN_DATA_OFF__<BR> [Test Step]<BR> 1.insert CMCC volte card<BR> 2.turn off data option<BR> 3.query CFU<BR> [Expected Result]<BR> CFU fail.,Pass,,,,
-9533,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM does TAU for RAT mode change from 45G to 4G<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enabled.<BR>0:Disable,,,__EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G__,MD Config,Modem - Customer Requirement,,,NA,Untested,,,,
+9533,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM does TAU for RAT mode change from 45G to 4G<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:Enabled.<BR>0:Disable,,,__EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
9534,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[86].SBP_HSDPA_CAT,modem_sbp_data_config[86].SBP_HSDPA_CAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>HSDPA UE Category.<BR>bit 24:24:HSDPA UE category: 24",BIT,8,,8,0x67,NR15.R3.MD700.MP,,0-29:HSDPA Category,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes) <BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
9535,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[87].SBP_HSUPA_CAT,modem_sbp_data_config[87].SBP_HSUPA_CAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>HSUPA UE Category.<BR>bit 7:7:HSUPA UE category: 7<BR>",BIT,8,,8,0x01,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
9536,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_DISABLE_4G5_EVALUATE_PING_PONG_CHECK,modem_sbp_config[121].SBP_DISABLE_4G5_EVALUATE_PING_PONG_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR diable 4G5 ping-pong evaluate check<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -8901,7 +8901,7 @@
9543,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",srxlev,performance.est_th.srxlev,OTA and OTA BY OP,no,no,no,no,Srxlev threshold to determine serving quality is good for cell reselection related enhancement,SHORT,2,,,5,NR15.R3.MD700.MP,,invalid: 0x7FFF:Srxlev,,,,MD Config,Modem - Customer Requirement,,,[Pre-condition]<BR>(1) no SIM<BR>(2) one EMC support cell A and one non-EMC support cell B<BR>(3) turn on cell A and turn off cell B<BR><BR>[Step]<BR>(1) UE camps on EMC support cell A<BR>(2) weaker cell A's signal and turn on cell B<BR>(3) UE could reselect to cell B,Untested,,,,
9544,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_CONFIG_CA_COMB_BY_SBPID,modem_sbp_config[122].SBP_CONFIG_CA_COMB_BY_SBPID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable configure CA combination by SBP ID<BR>bit 0:0:Disable feature - configure CA combination by SBP ID <BR>bit 1:1:Enable feature - configure CA combination by SBP ID",BIT,1,,1,bit: 0,NR15.R3.MD700.MP,,0:Disable feature<BR>1:Enable feature,,,__SBP_CONFIG_CA_COMB_BY_SBPID__,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time 10<BR>[Init]follow MCF RD IT initial steps<BR>[Test Step]<BR>change value from 0 to 1<BR>change value from 1 to 0<BR>[Expected Result]<BR>Value changes in MCF dump,Untested,,,,
9545,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_DO_EMERGENCY_ATTACH_WHEN_T3402_IS_RUNNING,modem_sbp_config[122].SBP_DO_EMERGENCY_ATTACH_WHEN_T3402_IS_RUNNING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Peform emergency attach for emergency service when T3402 is running<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-9546,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delete LTE Stored SIBs when entering flight mode<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] <BR>Enable SBP <BR>Attach on LTE.<BR>Flight mode ON/OFF<BR>[Expected Result] <BR>DUT attach to LTE cell.<BR>All SIB are read again,Untested,,,,
+9546,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delete LTE Stored SIBs when entering flight mode<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] <BR>Enable SBP <BR>Attach on LTE.<BR>Flight mode ON/OFF<BR>[Expected Result] <BR>DUT attach to LTE cell.<BR>All SIB are read again,Pass,,,,
9547,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SEARCH_NEXT_WHEN_VPLMN_VOPS_NOT_SUPPORT_UE_IN_LTE_ONLY_MODE,modem_sbp_config[122].SBP_SEARCH_NEXT_WHEN_VPLMN_VOPS_NOT_SUPPORT_UE_IN_LTE_ONLY_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When UE is in LTE only mode and VPLMN does not support VoPS, search next PLMN directly<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes)<BR>[Init]<BR>Power on UE, enable SBP.<BR>[Test Step]<BR>1. UE is in LTE only mode.<BR>2. UE register over LTE network with VOPS not support.<BR><BR>[Expected Result]<BR>UE should search next PLMN",Pass,,,,
9548,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[89].SBP_FLIGHT_MODE_ECC_3GPP_SEARCH_RAT,modem_sbp_data_config[89].SBP_FLIGHT_MODE_ECC_3GPP_SEARCH_RAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>search rat order of 3GPP for flight mode ECC<BR>bit 0:0:0: disabled<BR>bit 1:1:1: LNWG",BIT,8,,8,0x00,NR15.R3.MD700.MP,,00,,,,(Sprint) E911,OP Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>1. Power on and enter flight mode<BR>2. make ECC<BR>[Expected Result]<BR>UE should start searching on LTE,Untested,,,,
9549,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[88].SBP_POS_MODE_NR_CAPABILITY_SWITCH,modem_sbp_data_config[88].SBP_POS_MODE_NR_CAPABILITY_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Switch the positioning mode in UE reporting NR AGPS/AGNSS positioning capability to NW.<BR>bit 0:0:UE does not support AGPS/AGNSS<BR>bit 1:1:UE-Based<BR>bit 2:2:UE-Assisted<BR>bit 3:3:Both UE-Based and UE-Assisted",BIT,8,,8,0x03,NR15.R3.MD700.MP,,3:bit 0:0:UE does not support AGPS/AGNSS<BR>bit 1:1:UE-Based<BR>bit 2:2:UE-Assisted<BR>bit 3:3:Both UE-Based and UE-Assisted,,,,LCS for LTE and EPS - CPS (LPP-e Control Plane),4G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 5 min<BR>[Init] <BR>[Test Step] Test AGPS related testing on NR<BR>[Expected Result] Check LPP capabilities report,Untested,,,,
@@ -9144,7 +9144,7 @@
10246,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",plmn_num,positive_list.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 20),UNSIGNED CHAR,1,,,0x08,NR15.R3.MD700.MP,,1-20:Number of entries in the PLMN list.,,,,MD Config,Modem - Customer Requirement,,,No test plan.,Pass,,,,
10258,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,band_ind,rf_sar_tx_power_offset_by_band[0~24].band_ind,OTA,no,no,no,no,Do not change this setting,ENUM,1,,,0,NR15.R3.MD700.MP,,0~255,,,no,SAR TX Power offset,SAR Mitigation,,,Update MCF fields and see if NVRAM values are changed accordingly.,Untested,,,,
10258,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,band_ind,rf_sar_tx_power_offset_by_band[0~34].band_ind,OTA,no,no,no,no,Do not change this setting,ENUM,1,,,0,NR15.R3.MD700.MP,,0~255:LTE_Band ENUM,,,no,SAR TX Power offset,SAR Mitigation,,,Update MCF fields and see if NVRAM values are changed accordingly.,Untested,,,,
-10259,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,tx_power_max_value,rf_sar_tx_power_offset_by_band[0~34].table[0~11].tx_power_max_value,OTA,no,no,no,no,unit for custom to input: 1/8 dB -> value '8' = 1 dB,CHAR,N,N,,,NR15.R3.MD700.MP,,,,,no,SAR TX Power offset,SAR Mitigation,,,Update MCF fields and see if NVRAM values are changed accordingly.,Untested,,,,
+10259,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,tx_power_max_value,rf_sar_tx_power_offset_by_band[0~34].table[0~11].tx_power_max_value,OTA,no,no,no,no,unit for custom to input: 1/8 dB -> value '8' = 1 dB,CHAR,N,N,,,NR15.R3.MD700.MP,,,,,no,SAR TX Power offset,SAR Mitigation,,,Update MCF fields and see if NVRAM values are changed accordingly.,Pass,,,,
10278,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_invite_to_18x_timer_timeout,ua_config.mo_invite_to_18x_timer_timeout,OTA and OTA BY OP,no,no,no,no,Configuration to trigger csfb if 18x not received in time after having sent INVITE<BR>0:Disable<BR>Unit:sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.MP,,"1~255: timer value, unit: sec<BR>0:Disable",,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
10280,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,band,sar_2rgn_db[0~59].sar_2rgn_node[0~1].band,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,2,,,MMRF_UNI_BANDNONE,NR15.R3.MD700.MP,,enum: {0~270},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
10281,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,rat,sar_2rgn_db[0~59].sar_2rgn_node[0~1].rat,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,1,,,MMRF_UNI_RAT_INVAILD,NR15.R3.MD700.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
@@ -9175,12 +9175,12 @@
10308,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_C2K_FORBIDDEN_FOR_NON_CHINA_SIM,modem_sbp_config[123].SBP_C2K_FORBIDDEN_FOR_NON_CHINA_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>C2K only available on CT sim<BR>bit 0:0:No<BR>bit 1:1:Yes<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x00,,,,,,,,"Not necessary, this field is always disable on NR15.R3.MP.",Untested,,,,
10309,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_DELAY_URLC_RESET_PDU_DURING_REESTABLISHMENT,modem_sbp_config[124].SBP_DELAY_URLC_RESET_PDU_DURING_REESTABLISHMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delay URLC Reset PDU during TX Re-establishment<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10310,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_DISABLE_CELL_SEL_MODE_II_DURING_CSFB_STORED_CELL_SEL,modem_sbp_config[126].SBP_DISABLE_CELL_SEL_MODE_II_DURING_CSFB_STORED_CELL_SEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable cell selection mode II for CSFB redirection<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-10311,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not reset 2G RR SI2Q parameter when SI13 change_mark indicates there is SI change<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step] Send SI2 Q with 3G neghbours. Send classmark change in SI13 and do not send SI2 Q again<BR>[Expected Result]Reselect to 3G,Untested,,,,
+10311,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not reset 2G RR SI2Q parameter when SI13 change_mark indicates there is SI change<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step] Send SI2 Q with 3G neghbours. Send classmark change in SI13 and do not send SI2 Q again<BR>[Expected Result]Reselect to 3G,Pass,,,,
10312,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_ENDC_DISABLE_NR_B1_DURING_VOLTE,modem_sbp_config[126].SBP_ENDC_DISABLE_NR_B1_DURING_VOLTE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>For ENDC mode, when VoLTE call is ongoing, disable reporting of NR B1 event.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10313,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_FAKE_DEACTIVATE_PDN_FOR_WIFI_HANDOVER,modem_sbp_config[123].SBP_FAKE_DEACTIVATE_PDN_FOR_WIFI_HANDOVER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Fake PDN deactivation for wifi handover procedure<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>FDN check for Data service<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:FDN check for Data service<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Enabled for TITAN projects<BR>Enable the FDN and do a PDN activation<BR>Verify if the FDN is enabled or not,Untested,,,,
+10314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>FDN check for Data service<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:FDN check for Data service<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Enabled for TITAN projects<BR>Enable the FDN and do a PDN activation<BR>Verify if the FDN is enabled or not,Pass,,,,
10315,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_FOP_SETTING_ONLY_FOR_H3G,modem_sbp_config[122].SBP_FOP_SETTING_ONLY_FOR_H3G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>FOP setting for H3G operater requirement<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"Not necessary, this field is always disable on NR15.R3.MP.",Untested,,,,
-10316,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform re-selection first if connection establish ever fail<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+10316,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform re-selection first if connection establish ever fail<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
10317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_INVALID_SIM_RECOVERY,modem_sbp_config[123].SBP_INVALID_SIM_RECOVERY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Recover invalid SIM to camp on network<BR>bit 0:0:Disable SIM recovery<BR>bit 1:1:Enable SIM recovery<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MCF (Modem Configuration Framework),MCF,,,,Untested,,,,
10318,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_INCR_NET_SCAN_SUPPORT,modem_sbp_config[124].SBP_IPCA_INCR_NET_SCAN_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MD does not support Incremental Network Scan<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1<BR>0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10319,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_NW_MODE_EXTEND_FOR_ANDROID_O,modem_sbp_config[124].SBP_IPCA_NW_MODE_EXTEND_FOR_ANDROID_O,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Add EVDO enum in NW mode for Android O<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
@@ -9197,7 +9197,7 @@
10330,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_SAT_CTC_CUSTOMIZED_TERMINAL_PROFILE,modem_sbp_config[124].SBP_SAT_CTC_CUSTOMIZED_TERMINAL_PROFILE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To use full or partial 0xFF Terminal Profile for CTC cards<BR>bit 0:0:Disable. CTC card's terminal profile is all bytes of 0xFF.<BR>bit 1:1:Enable. CTC card's terminal profile is 20 bytes of 0xFF with rest bytes of 0x00.",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disable. CTC card's terminal profile is all bytes of 0xFF.,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10331,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_SAT_REISSUE_SIM_REFRESH_DURING_ECC,modem_sbp_config[126].SBP_SAT_REISSUE_SIM_REFRESH_DURING_ECC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>block REFRESH during ECBM mode, reissues after ECBM mode end<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N): Y<BR><BR>[Init]<BR>UE registered to LTE NW<BR><BR>[Test Step]<BR>1.Make ECC call<BR>2. End Call<BR>3. Simulate SIM refresh. It should happen before ECBM timer expiry (usually 5 minutes)<BR><BR>[Expected Result]<BR>If SBP enabled<BR>1. UE should reject the REFRESH and there should be no NW detach<BR>2. UE may reissue the stored REFRESH once ECBM timer expires,Untested,,,,
10332,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SAT_SEND_STATUS_AFTER_90TR_UNTIL_PLI_IMEI,modem_sbp_config[122].SBP_SAT_SEND_STATUS_AFTER_90TR_UNTIL_PLI_IMEI,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Additionally send STATUS after TR with 9000, until SIM card queries IMEI<BR>bit 0:0:Disable. Don't additionally send STATUS<BR>bit 1:1:Enable. Additionally send STATUS<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disable. Don't additionally send STATUS after TR with 9000.,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10333,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE to support IMS-Roaming in Modem Modules<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:UE to support IMS-Roaming in Modem Modules<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported,,,,MD Config,Modem - Customer Requirement,,,"Switch on the device<BR>For VZW operator, the SBP is ON by default<BR>Make sure the the SIM card is in roaming condition<BR>Check if the IMS PDN activation is successful",Untested,,,,
+10333,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE to support IMS-Roaming in Modem Modules<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:UE to support IMS-Roaming in Modem Modules<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported,,,,MD Config,Modem - Customer Requirement,,,"Switch on the device<BR>For VZW operator, the SBP is ON by default<BR>Make sure the the SIM card is in roaming condition<BR>Check if the IMS PDN activation is successful",Pass,,,,
10334,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_SHORT_T3417EXT_OPTMZ_FOR_CSFB_AFTR_VOLTE_CALL_FAILURE,modem_sbp_config[126].SBP_SHORT_T3417EXT_OPTMZ_FOR_CSFB_AFTR_VOLTE_CALL_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Control MTK optimizaion where T3417ext is started with 4sec for CSFB after VoLTE call failure<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10335,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_TITAN_SKIP_IMEI_VERIFICATION,modem_sbp_config[125].SBP_TITAN_SKIP_IMEI_VERIFICATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip Titan's IMEI verification<BR>bit 0:0:Disable: Will check IMEI<BR>bit 1:1:Enable: Skip it<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10336,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_TREAT_PLMN_FROM_IMSI_AS_EHPLMN,modem_sbp_config[125].SBP_TREAT_PLMN_FROM_IMSI_AS_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>If EHPLMN is present and does not contain the PLMN of IMSI, we would treat the PLMN of IMSI as HPLMN<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
@@ -9389,7 +9389,7 @@
10532,1226,NVRAM_EF_MML1_TXPOWEROFFSET_LID,1,SWTP_manual_mod_enable,SWTP_manual_mod_enable,OTA,no,no,yes,no,"[DOC,MCF] Tx power offset feature",ENUM,1,,,0,NR15.R3.MD700.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10533,2370,NVRAM_EF_MRS_OPERATOR_FEATURE_TABLE_LID,1,feature.OP_FEATURE_ENDC_BEFORE_SA_SEARCH,entry[0~99].feature.OP_FEATURE_ENDC_BEFORE_SA_SEARCH,OTA,no,no,no,yes,Operator Feature<BR>ENDC before SA search<BR>bit 0:0:No<BR>bit 1:1:Yes,BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
10534,2370,NVRAM_EF_MRS_OPERATOR_FEATURE_TABLE_LID,1,feature.OP_FEATURE_SA_STORED_ONLY_SEARCH,entry[0~99].feature.OP_FEATURE_SA_STORED_ONLY_SEARCH,OTA,no,no,no,yes,Operator Feature<BR>NR SA Stored only search<BR>bit 0:0:No<BR>bit 1:1:Yes,BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
-10535,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE ignore LTE redirect and try AFR to 5G first<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+10535,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE ignore LTE redirect and try AFR to 5G first<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
10536,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_ATT_WIFI_CELLULAR_HO_THRESHOLD,modem_sbp_config[128].SBP_ATT_WIFI_CELLULAR_HO_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Report handover threshold measurements for wifi<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
10537,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_ME_FOR_CUSTOM_PLMN,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_ME_FOR_CUSTOM_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>block illegal ME for custom PLMN <BR>bit 0:0:Not Enabled: Always send the Illegal ME to GMSS<BR>bit 1:1:Enabled: Only send Illegal ME when it matches to custom PLMN",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1,,,,MD Config,Modem - Customer Requirement,,,1. receiving LR reject cause=ILLEGAL_ME or ILLEGAL_MS with invalid SIM<BR>2. check MSG_ID_GMSS_NWSEL_ILLEAGAL_ME_IND,Untested,,,,
10538,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_UE,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_UE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable block illegal ME feature<BR>bit 0:0:Disabled: When DUT receives rej #3, do not block the entire device<BR>bit 1:1:Enabled: When DUT receives rej #3, block the entire device",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bool: False,,,NA,MD Config,Modem - Customer Requirement,,,[Init]<BR>[Test Step]<BR>UE reject #3<BR>[Expected Result],Pass,,,,
@@ -9425,7 +9425,7 @@
10605,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",elevator_leave_window_offset,elevator_leave_window_offset,OTA and OTA BY OP,no,no,no,no,[MCF]Customized window offset for elevator mode leaving judgement. (qdBm),UNSIGNED CHAR,1,,,0x18,NR15.R3.MD700.MP,,uint8,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10606,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",elevator_skip_A1_thresh,elevator_skip_A1_thresh,OTA and OTA BY OP,no,no,no,no,[MCF]Customized RSRP threshold for elevator mode A1 skip judgement. (qdBm),SHORT,2,,,"0x70, 0xfe,",NR15.R3.MD700.MP,,int16,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10607,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_MODEM_LTE_ENDC_ELEVATOR_MODE,modem_sbp_config[130].SBP_MODEM_LTE_ENDC_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MOB disable NSA elevator mode feature<BR>bit 0:0:Not apply NSA elevator mode feature<BR>bit 1:1:Apply NSA elevator mode feature",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10608,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Order CA with Enablelist for custom PLMN<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+10608,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Order CA with Enablelist for custom PLMN<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
10610,1537,NVRAM_EF_LTE_PREFERENCE_LID,"1,2",ue_mode_by_at_cmd,ue_mode_by_at_cmd,OTA and OTA BY OP,no,no,no,yes,"[RUNTIME, MCF]ue_mode_by_at_cmd",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,int:0~4:0: PS_MODE_2 1: CS_PS_MODE_1 2: CS_PS_MODE_2 3: PS_MODE_1 4: INVALID (auto),,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10611,1537,NVRAM_EF_LTE_PREFERENCE_LID,"1,2",ue_mode_by_at_cmd.ue_mode_by_at_cmd,ue_mode_by_at_cmd.ue_mode_by_at_cmd,OTA and OTA BY OP,no,no,no,yes,"[RUNTIME, MCF]ue_mode_by_at_cmd<BR>ue_mode_by_at_cmd<BR>bit 0:0:PS mode 2<BR>bit 1:1:CS/PS mode 1<BR>bit 2:2:CS/PS mode 2<BR>bit 3:3:PS mode 1<BR>bit 4:4:Clear",BIT,8,,8,0x00,NR15.R3.MD700.MP,,int:0~4:0: PS_MODE_2 1: CS_PS_MODE_1 2: CS_PS_MODE_2 3: PS_MODE_1 4: INVALID (auto),,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10612,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY,modem_sbp_config[130].SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable EUTRAN for the current PLMN and search next available LTE PLMN<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:disable<BR>1:enable,,,,[LTE Protocol Baseline]NWSEL_PowerOn,Modem System Test,,,Test in machine (Y/N) N<BR>Test Time (minutes) 0<BR>[Init]<BR>[Test Step] set SBP on<BR>[Expected Result] SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY TRUE,Untested,,,,
@@ -9511,17 +9511,17 @@
10722,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stop_crs_if_no_video_or_audio.stop_crs_if_no_video_or_audio,ua_config.stop_crs_if_no_video_or_audio.stop_crs_if_no_video_or_audio,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>If the result of SDP negoitation for CRS is audio only, then MD will not enable CRS. If the result of SDP negoitation for CRS is video+audio, however no audio rtp could be received till wait_audio_rtp_for_crs_timer timeout, MD will notify AP to turn off CRS.<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.MP,,0~1,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10723,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_audio_rtp_for_crs_timer_timeout.wait_audio_rtp_for_crs_timer_timeout,ua_config.wait_audio_rtp_for_crs_timer_timeout.wait_audio_rtp_for_crs_timer_timeout,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>After CRS (MT early media) has been turned on, timer will be started. If no audio rtp could be received till timer expiries, MD will notify this event to AP (via +ECPI 7).<BR>bit 0:0:Disable",BIT,8,,8,0xff,NR15.R3.MD700.MP,,0~255,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10724,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_DISABLE_SIM_RECOVERY_TIMER_WHEN_PLUG_OUT,modem_sbp_config[131].SBP_DISABLE_SIM_RECOVERY_TIMER_WHEN_PLUG_OUT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable the sim recovery timer when final card state is plug out<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10726,57387,NVRAM_EF_NL1_SB_HPUE_SETTING_LID,1,sb_hpue_capability,sb_hpue_data[0~29].sb_hpue_capability,OTA,no,no,no,no,single band HPUE capability,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Untested,,,,
-10727,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,ca_hpue_capability,mrdc_hpue_data[0~999].ca_hpue_capability,OTA,no,no,no,no,ENDC HPUE capability,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Untested,,,,
-10728,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,eutra_hpue_capability,mrdc_hpue_data[0~999].eutra_hpue_capability,OTA,no,no,no,no,LTE part HPUE capability of ENDC,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Untested,,,,
-10729,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,idx,mrdc_hpue_data[0~999].idx,OTA,no,no,no,no,ENDC CA index (need to refer to ue capability),UNSIGNED INT,4,,,0xFFFFFFFF,NR15.R3.MD700.MP,,0~999,,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Untested,,,,
+10726,57387,NVRAM_EF_NL1_SB_HPUE_SETTING_LID,1,sb_hpue_capability,sb_hpue_data[0~29].sb_hpue_capability,OTA,no,no,no,no,single band HPUE capability,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
+10727,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,ca_hpue_capability,mrdc_hpue_data[0~999].ca_hpue_capability,OTA,no,no,no,no,ENDC HPUE capability,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
+10728,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,eutra_hpue_capability,mrdc_hpue_data[0~999].eutra_hpue_capability,OTA,no,no,no,no,LTE part HPUE capability of ENDC,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
+10729,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,idx,mrdc_hpue_data[0~999].idx,OTA,no,no,no,no,ENDC CA index (need to refer to ue capability),UNSIGNED INT,4,,,0xFFFFFFFF,NR15.R3.MD700.MP,,0~999,,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
10732,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,modem_sbp_config[132].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do LTE backround search, when Serving cell priority is not present<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
10733,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR,modem_sbp_config[132].SBP_MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Increment abnormal count after reject with cause#22<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Based on RRC AS release indicator decide to increment abnormal count after reject with cause#22.<BR><BR>1:Increment abnormal count after reject with cause#22,,,"if compile option __MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR__ is defined, the SBP is enabled.",WCDMA_GSM_MM,Modem System Test,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] NA<BR>[Test Step] Run AT&T test case LTE-BTR-1-1824<BR>[Expected Result] LTE-BTR-1-1824 should pass,Pass,,,,
10735,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST,modem_sbp_config[132].SBP_CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Update TMO_US live network PLMN's as defined in custom array CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Untested,,,,
10737,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ecc_use_normal_pcscf,imc_config.ecc_use_normal_pcscf,OTA and OTA BY OP,no,no,yes,no,"Control If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used<BR>0:Disable<BR>1:Enale<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.MP,,"bit: 0/1:0:Disable, 1:Enable<BR><BR>0:Disable<BR>1:Enale",,,,IMS,IMS,,,"1. set ecc_use_normal_pcscf =1<BR>2. do IMS emergency call, NW build emergency PDN, but no P-CSCF address in it.<BR>3. a P-CSCF address for a normal call shall be used.<BR>4.expected: IMS emergency registration success, emergency call success.",Untested,,,,
10738,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ecc_use_normal_pcscf.ecc_use_normal_pcscf,imc_config.ecc_use_normal_pcscf.ecc_use_normal_pcscf,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>Control If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used<BR>bit 0:0:Disable<BR>bit 1:1:Enale",BIT,32,,32,0xff,NR15.R3.MD700.MP,,"bit: 0/1:Control If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used<BR>0:Disable<BR>1:Enale",,,,IMS,IMS,,,"[Init]<BR>UE register IMS.<BR>[Test Step]<BR>1. conditions: NW support control that If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used. set ecc_use_normal_pcscf =1. 2.dial emergency call. <BR>[Expected Result]If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used.",Untested,,,,
10739,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_MODIFY_CEER_CAUSE_RR_CONN_REL,modem_sbp_config[132].SBP_MODIFY_CEER_CAUSE_RR_CONN_REL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Modify ceer cause for RLF<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-10740,57387,NVRAM_EF_NL1_SB_HPUE_SETTING_LID,1,idx,sb_hpue_data[0~29].idx,OTA,no,no,no,no,Single band CA index (need to refer to ue capability),UNSIGNED INT,4,,,0xFFFFFFFF,NR15.R3.MD700.MP,,0~29,,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Untested,,,,
+10740,57387,NVRAM_EF_NL1_SB_HPUE_SETTING_LID,1,idx,sb_hpue_data[0~29].idx,OTA,no,no,no,no,Single band CA index (need to refer to ue capability),UNSIGNED INT,4,,,0xFFFFFFFF,NR15.R3.MD700.MP,,0~29,,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
10741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[161].SBP_VOLTE_A5_THRESH_MODIFY,modem_sbp_config[161].SBP_VOLTE_A5_THRESH_MODIFY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Session will not be protected to reseve the resources<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,IMS,IMS,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
10742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_GMSS_USCC_HANDLING,modem_sbp_config[132].SBP_GMSS_USCC_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable USCC handling in GMSS module logic<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:0: disabled<BR>1: enabled,,,,MD Config,Modem - Customer Requirement,,,Follow SBP value setting check. To set in the NVRAM editor and check in OM project,Untested,,,,
10743,3136,NVRAM_EF_THERMAL_SENSOR_INFO_LID,1,hws_temp,hws_temp,OTA,no,no,no,no,[MCF]HW shutdown temperature in 1/10th of Celsius Degrees,UNSIGNED INT,4,,,1150,NR15.R3.MD700.MP,,int:0~9999:unit in 1/10th of Celsius Degrees,,,MD_TFWK,MD_TFWK,Driver,,,Test in machine (Y)<BR>Test Time (wait system reset)<BR>[Init] set hws_temp as X (in 1/10th of Celsius Degrees)<BR>[Test Step] manually heat corresponding NTC sensor<BR>[Expected Result] system will reset when NTC temperature over X,Untested,,,,
@@ -9544,7 +9544,7 @@
10761,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.b1,ua_config.support_video_early_media.b1,OTA and OTA BY OP,no,no,no,no,[MCF]To enable the video early media feature<BR>video ringback tone (default 0),BIT,1,,1,0,NR15.R3.MD700.MP,,0/1:0:Not support video CAT (Customized Alerting Tone)<BR>1:Support video CAT,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10762,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.b2,ua_config.support_video_early_media.b2,OTA and OTA BY OP,no,no,no,no,[MCF]To enable the video early media feature<BR>video ringing tone (default 0),BIT,1,,1,0,NR15.R3.MD700.MP,,0/1:0:Not support video CRS (Customized Ringing Signal)<BR>1:Support video CRS,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10763,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.b3,ua_config.support_video_early_media.b3,OTA and OTA BY OP,no,no,no,no,[MCF]To enable the video early media feature<BR>reserved,BIT,6,,6,0,NR15.R3.MD700.MP,,0:reserved,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_NR_CA,modem_sbp_config[132].SBP_NR_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR Carrier Aggregation Operation<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,"0/1:1: NR CA supported, 0: NR CA not supported",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+10765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_NR_CA,modem_sbp_config[132].SBP_NR_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR Carrier Aggregation Operation<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.MP,,"0/1:1: NR CA supported, 0: NR CA not supported",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
10766,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,amprData,ampr_by_band[0~239].amprData,OTA,no,no,no,no,"[MCF]AMPR value, unit is 1/256 dB",UNION,200,,,,NR15.R3.MD700.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
10767,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,aseIdx,ampr_by_band[0~239].aseIdx,OTA,no,no,no,no,[MCF]additional spectrum Emission index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
10768,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,bandIdx,ampr_by_band[0~239].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
@@ -9627,15 +9627,15 @@
10861,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",accept_wifi_call_if_audio_cap_0,ua_config.accept_wifi_call_if_audio_cap_0,Not Support,no,no,no,no,"This is to accept incoming WIFi call when WFC is disabled and voice WiFi capability is disabled.<BR>0: Align with VOLTE operation, reject incoming call if audio capability is disabled.<BR>1: Ignore audio capability setting when it is a wifi call.<BR>0: Align with VOLTE operation, reject incoming call if audio capability is disabled.<BR>1: Ignore audio capability setting when it is a wifi call.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.MP,,"1: audio capability can be ignored for incoming wifi call<BR>0:Align with VOLTE operation, reject incoming call if audio capability is disabled<BR>1:Ignore audio capability setting when it is a wifi call",,,,IMS,IMS,,,disable audio capability and then make wifi call to the device<BR>The device shall be able to accept it,Untested,,,,
10862,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",accept_wifi_call_if_audio_cap_0.accept_wifi_call_if_audio_cap_0,ua_config.accept_wifi_call_if_audio_cap_0.accept_wifi_call_if_audio_cap_0,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>This is to accept incoming WiFi call when WFC is disable and voice wifi capability is disabled.<BR>bit 0:0:Align with VoLTE operation, reject incoming call if audio capability is disabled.<BR>bit 1:1:Ignore audio capability setting when it is a wifi call.",BIT,8,,8,0xff,NR15.R3.MD700.MP,,0/1:0: audio capability shall be checked for wifi call 1: audio capability can be ignored for incoming wifi call<BR>1:audio capability can be ignored for incoming wifi call<BR>0:audio capability shall be checked for wifi call,,,,IMS,IMS,,,disable audio capability and then make wifi call to the device<BR>The device shall be able to accept it,Untested,,,,
10863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_EMM_DISABLE_SR_REJECT_LOCAL_REL_CONN,modem_sbp_config[132].SBP_EMM_DISABLE_SR_REJECT_LOCAL_REL_CONN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM disable Service Reject local release connection<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"0/1:If Value equals to 0 means EMM will local release connection when receiving Service Reject with abnormal cause;<BR>Else, EMM won't local release connection in such scenario",,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Check CA with RF capability<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+10866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Check CA with RF capability<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
10868,60425,NVRAM_EF_EL1_AMPRADJTBL_LID,1,amprData,ampr_by_band[0~34].amprData,OTA,no,no,no,no,"[MCF] AMPR value, unit is 1/256 dB",UNION,48,,,,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10869,60425,NVRAM_EF_EL1_AMPRADJTBL_LID,1,amprIdx,ampr_by_band[0~34].amprIdx,OTA,no,no,no,no,[MCF] NS index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10870,60425,NVRAM_EF_EL1_AMPRADJTBL_LID,1,bandIdx,ampr_by_band[0~34].bandIdx,OTA,no,no,no,no,[MCF] Band index,ENUM,1,,,,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_CHANGE_RAT_FOR_CUSTOM_IMSI,modem_sbp_config[133].SBP_CHANGE_RAT_FOR_CUSTOM_IMSI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Update RAT mode based on MCC and IMSI<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
10872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_RAT_MODE_SETTING_FOR_DOCOMO,modem_sbp_config[133].SBP_RAT_MODE_SETTING_FOR_DOCOMO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Customize RAT mode setting for DOCOMO operator.<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
10874,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_RAT_MODE_SETTING_FOR_KDDI,modem_sbp_config[132].SBP_RAT_MODE_SETTING_FOR_KDDI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Customize RAT mode setting for KDDI operator.<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-10876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Check CA with RF capability<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
-10878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip CA Enablist customization<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+10876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Check CA with RF capability<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+10878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip CA Enablist customization<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
10898,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,1,timer_length_delay_resume_ads_for_service_recover_from_23g,profile_emerg.general_setting_emerg.timer_length_delay_resume_ads_for_service_recover_from_23g,OTA BY OP,no,no,no,yes,To wait for service recover from 23g before resuming ADS,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,int:0-255,,,,MD Config,Modem - Customer Requirement,,,Use MCF set the Value and check if the value is set correctly in NVRAM,Untested,,,,
10899,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,1,timer_length_delay_resume_ads_for_service_recover_from_23g,profile_normal.general_setting_normal.timer_length_delay_resume_ads_for_service_recover_from_23g,OTA BY OP,no,no,no,yes,To wait for service recover from 23g before resuming ADS,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,int:0-255,,,,MD Config,Modem - Customer Requirement,,,Use MCF set the Value and check if the value is set correctly in NVRAM,Untested,,,,
10900,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_RETRY_FPLMN_ONE_ROUND,modem_sbp_config[133].SBP_RETRY_FPLMN_ONE_ROUND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Allow to retry FPLMNs<BR>bit 0:0:Not Enabled: Default behavior<BR>bit 1:1:Enabled: UE store FPLMNs and search them after timer expires",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (6 minutes)<BR>[Init] Set SBP to ON<BR>[Test Step] 1. PLMN rejected #11. 2. Wait for 5 minutes. 3. Observe whether the UE retry the FPLMN<BR>[Expected Result] UE Retry FPLMN,Pass,,,,
@@ -9741,7 +9741,7 @@
11058,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[103].SBP_WCDMA_RRC_FEATURE_EXT,modem_sbp_data_config[103].SBP_WCDMA_RRC_FEATURE_EXT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable/Disable additional WCDMA RRC Feature<BR>bit 1:1:RRC FEATURE: HSSCCHLESS<BR>bit 2:2:RRC FEATURE: INTERRATHO<BR>bit 4:4:RRC FEATURE: MEASREPORT<BR>bit 8:8:RRC FEATURE: TWODRXSCHEMES<BR>bit 16:16:RRC FEATURE: EDPDCHPOWER",BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,SBP_WCDMA_RRC_FEATURE,MD Config,Modem - Customer Requirement,,,Enable/ Disable SBP.<BR>Check RRC connection establishment message content.,Untested,,,,
11062,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_DISABLE_EUTRAN_WHILE_NO_23G,modem_sbp_config[137].SBP_DISABLE_EUTRAN_WHILE_NO_23G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable EUTRAN for the current PLMN and search next available LTE PLMN<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enable<BR>0:disable,,,,[LTE Protocol Baseline]NWSEL_PowerOn,Modem System Test,,,Test in machine (Y/N) N<BR>Test Time (minutes) 0<BR>[Init]<BR>[Test Step] set SBP on<BR>[Expected Result] SBP_DISABLE_EUTRAN_WHILE_NO_23G TRUE,Untested,,,,
11063,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_NR_RRC_CONNECTED_SIB1_FAIL_ENHANCEMENT,modem_sbp_config[137].SBP_NR_RRC_CONNECTED_SIB1_FAIL_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Trigger error recovery procedure after unsuccessful SIB1 reception in RRC-CONNECTED.<BR>bit 0:0:Enhancement disabled<BR>bit 1:1:Enhancement enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,1,,,,Option 2,5G Architecture,,,Trigger SBI1 reception failure in RRC_CONNECTED,Untested,,,,
-11069,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Force to use reduced CAT (CAT12) and CA table whether the plmn is<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+11069,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Force to use reduced CAT (CAT12) and CA table whether the plmn is<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
11072,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_block_wifi_until_srvcc_call_end,ipol_ans_cfg.ipol_ims_block_wifi_until_srvcc_call_end,OTA and OTA BY OP,no,no,no,no,"[MCF]When enable, UE will not attempt IMS over WLAN until SRVCC CS call end<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.MP,,int: 0~1,,,none,MD Config,Modem - Customer Requirement,,,"Make IMS call in VoLTE, SRVCC call to 3G, keep call ongoing in CS, WiFi become availalble. Observer that UE does not attempt to make IMS reg in wifi until call in CS in ended.",Pass,,,,
11081,2191,NVRAM_EF_D2_MCF_APN_CFG_LID,1,mvno_match_data,apn_cfg[0~9].mvno_match_data,OTA BY OP,no,no,no,yes,[MCF]Match data of corresponding MVNO type,UNSIGNED CHAR,100,100,,0x00,NR15.R3.MD700.MP,,char: any,,,,MCF (Modem Configuration Framework),MCF,,,Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>1. Configure mvno_match_data in NVRAM_EF_D2_MCF_APN_CFG_LID<BR>[Test Step]<BR>1. Boot up the phone and insert VZW SIM card<BR>2. Use MCF dump to dump files<BR>[Expected Result]<BR>Check MCF dump file is the same as configured OTA content,Pass,,,,
11082,2191,NVRAM_EF_D2_MCF_APN_CFG_LID,1,mvno_type,apn_cfg[0~9].mvno_type,OTA BY OP,no,no,no,no,"[MCF]MVNO type {GID, IMSI}",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,char: 0-2,,,,MCF (Modem Configuration Framework),MCF,,,Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>1. Configure mvno_type in NVRAM_EF_D2_MCF_APN_CFG_LID<BR>[Test Step]<BR>1. Boot up the phone and insert VZW SIM card<BR>2. Use MCF dump to dump files<BR>[Expected Result]<BR>Check MCF dump file is the same as configured OTA content,Pass,,,,
@@ -9788,7 +9788,7 @@
11132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_GMSS_ENFORCE_3GPP_ANY_IN_MSPL,modem_sbp_config[139].SBP_GMSS_ENFORCE_3GPP_ANY_IN_MSPL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Add 3GPP_ALL ANY entry in the MSPL<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
11133,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_MODEM_LTE_NON_ENDC_TO_ENDC_RESEL_THRESHOLD,modem_sbp_config[139].SBP_MODEM_LTE_NON_ENDC_TO_ENDC_RESEL_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MOB will check neighbor cell RSRP/RSRQ with ENDC prefer RSRP/RSRQ threshold<BR>bit 0:0:Not check neighbor cell RSRP/RSRQ with ENDC prefer RSRP/RSRQ threshold<BR>bit 1:1:Check neighbor cell RSRP/RSRQ with ENDC prefer RSRP/RSRQ threshold<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
11134,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_TRIGGER_SEARCH_WHEN_IMS_ON,modem_sbp_config[139].SBP_TRIGGER_SEARCH_WHEN_IMS_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable trigger search after IMS on.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,[LTE Protocol Baseline]NWSEL_Performance,Modem System Test,,,"Test in machine N<BR>Test Time (minutes)<BR>5<BR>[Init]<BR>Before turn off IMS, UE camp on 3G/4G.<BR>[Test Step]<BR>After turn on IMS, UE shall camp on 4G/5G again.<BR>[Expected Result]<BR>PASS",Untested,,,,
-11135,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MCCDB+BBL Enabled or Disabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disabled<BR>1:Enabled,,,__TC10__<BR>__SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Untested,,,,
+11135,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MCCDB+BBL Enabled or Disabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disabled<BR>1:Enabled,,,__TC10__<BR>__SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
11138,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>User can disable NR band(s) by plmn<BR>bit 0:0:Not enabled this feature<BR>bit 1:1:Enable this feature",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:Feature disabled (0) or enabled (1).,,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
11139,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR band disable by plmn can be used under test sim or test mode<BR>bit 0:0:Feature not enabled for test sim or test mode<BR>bit 1:1:Feature enabled for test sim or test mode",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:Feature disabled (0) or enabled (1).,,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
11144,1601,NVRAM_EF_EMM_SMART_IDLE_INFO_LID,"1,2",enable_local_release,enable_local_release,OTA,no,no,no,no,[MCF] enable local release RRC connection or not,ENUM,1,,,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time: TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
@@ -9847,7 +9847,7 @@
11186,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",xcap_pdn_alignment_setting,xcap_ans_cfg.xcap_pdn_alignment_setting,OTA and OTA BY OP,no,no,no,no,[MCF]Let RAT selection of XCAP align target pdn when target pdn is avtivated.<BR>alignment:8 "" <BR>1:"Default";<BR>2:"IMS";<BR>3:"MMS";<BR>4:"EMERGENCY";<BR>5:"XCAP";<BR>6:"RCS";<BR>7:"BIP";<BR>8:"SUPL";<BR>9:"VSIM";<BR><BR><BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,1~9:1:Default<BR>2:IMS<BR>3:MMS<BR>4:EMERGENCY<BR>5:XCAP<BR>6:RCS<BR>7:BIP<BR>8:SUPL<BR>9:VSIM,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,This configuration can't not observed by UI behavior.<BR><BR>1. Setting XCAP align IMS PDN<BR>2. Enable VoWIFI or VoLTE<BR>3. Switch IMS between VoWIFI and VoLTE and enable XCAP PDN<BR>4. check log that does XCAP set up PDN follow target PDN.<BR>it's meaning that the RAT selection of XCAP should be the same with target PDN,Pass,,,,
11187,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",xcap_pdn_alignment_setting.alignment,xcap_ans_cfg.xcap_pdn_alignment_setting.alignment,Not Support,no,no,no,no,[MCF]Let RAT selection of XCAP align target pdn when target pdn is avtivated.<BR><BR>bit 1:1:Default<BR>bit 2:2:IMS<BR>bit 3:3:MMS<BR>bit 4:4:EMERGENCY<BR>bit 5:5:XCAP<BR>bit 6:6:RCS<BR>bit 7:7:BIP<BR>bit 8:8:SUPL<BR>bit 9:9:VSIM,BIT,8,,8,0xff,NR15.R3.MD700.MP,,,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Untested,,,,
11189,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_ENABLE_CA_CSR,modem_sbp_config[140].SBP_ENABLE_CA_CSR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable CA CSR<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,Enable = 1 & Disable = 0,,,,"Network Search Optimization - Fast Roaming, Fast List, Early Roaming Detection",MTK Proprietary,,,"AT+ESBP=5, "SBP_ENABLE_CA_CSR",1",Untested,,,,
-11194,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>The record life timer for blacklist of Dynamic NR Cap Adjust mechanism",BIT,8,,8,0x18,NR15.R3.MD700.MP,,0x00~0xFF,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+11194,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>The record life timer for blacklist of Dynamic NR Cap Adjust mechanism",BIT,8,,8,0x18,NR15.R3.MD700.MP,,0x00~0xFF,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
11195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_LTE_APPLY_SINGLE_BAND_WW_FILTER_EVEN_NW_REQUEST_FREQBAND,modem_sbp_config[141].SBP_LTE_APPLY_SINGLE_BAND_WW_FILTER_EVEN_NW_REQUEST_FREQBAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not apply WW LTE band filter for single band when requestedFrequencyBands is given<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:0: FALSE; 1: TRUE,,,,MD Config,Modem - Customer Requirement,,,Perform NSA field trial in Amsterdam Netherland,Pass,,,,
11196,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_PAM_RF_OFF_RESET_BLOCKING_STATUS,modem_sbp_config[141].SBP_PAM_RF_OFF_RESET_BLOCKING_STATUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reset all restrictions to UE's request imposed by PAM when UE entering air-plane mode<BR>0:Disabled<BR>1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0<BR>1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
11197,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",skip_vdm_call_drop_rsrp_th,skip_vdm_call_drop_rsrp_th,OTA and OTA BY OP,no,no,no,no,[MCF]Customized serving cell RSRP threshold for skip measurement report judgment of CELL_REJ_CAUSE_VDM_CALL_DROP cell. (qdBm),SHORT,2,,,"0xf8, 0xfd,",NR15.R3.MD700.MP,,int16,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
@@ -9922,7 +9922,7 @@
11376,57373,NVRAM_EF_NL1_OFFSETNR_LID,1,bandIdx,offset_nr_fr1_by_band[0~39].bandIdx,OTA,no,no,no,no,Band index,ENUM,2,,,,NR15.R3.MD700.MP,,enum: NL1_BAND_XX:band index,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11377,57373,NVRAM_EF_NL1_OFFSETNR_LID,1,offset_pwr_nr_fr1,offset_nr_fr1_by_band[0~39].offset_pwr_nr_fr1,OTA,no,no,no,no,"[MCF]the power which exceeds the p_nr_fr1 limit, unit is dB",SHORT,2,,,,NR15.R3.MD700.MP,,int16: 0x0000:offset of p_nr_fr1 in each band,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11381,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_GAPLESS_MEAS_FOR_INTERRAT_NR_TEST_MODE,modem_sbp_config[144].SBP_LTE_GAPLESS_MEAS_FOR_INTERRAT_NR_TEST_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>lte inter-rat NR gapless meas in test mode<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-11395,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>support LTE schedulingInfoList_v12j0 in SIB1<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,LTE Protocol (R12 Baseline),4G,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+11395,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>support LTE schedulingInfoList_v12j0 in SIB1<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,LTE Protocol (R12 Baseline),4G,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
11396,61207,NVRAM_EF_PS_CONFORMANCE_TESTMODE_LID,1,data[0].val_d,data[0].val_d,Not Support,no,no,no,no,Test mode and test profile<BR>[MCF]lower byte of test profile,BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
11397,61207,NVRAM_EF_PS_CONFORMANCE_TESTMODE_LID,1,data[1].val_d,data[1].val_d,Not Support,no,no,no,no,Test mode and test profile<BR>[MCF]middle byte of test profile,BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
11398,61207,NVRAM_EF_PS_CONFORMANCE_TESTMODE_LID,1,data[2].val_d,data[2].val_d,Not Support,no,no,no,no,Test mode and test profile<BR>[MCF]higher byte of test profile,BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -9945,7 +9945,7 @@
11460,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",timer_length_wait_normal_service_before_any_plmn_search,profile_emerg.timer_length_wait_normal_service_before_any_plmn_search,OTA BY OP,no,no,no,yes,timer length for waiting normal service before triggering ANY PLMN search in PLNM search ongoing case,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.MP,,int:0-255,,,,IMS,IMS,,,Use MCF set the Value and check if the value is set correctly in NVRAM,Untested,,,,
11461,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_sdp_ans_ack_timeout,ua_config.call_sdp_ans_ack_timeout,OTA and OTA BY OP,no,no,no,no,Configuration to stop mt call when no PRACK for 183 with SDP answer<BR>0:Disable<BR>Unit:sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.MP,,0~255:0:Disable,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11462,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mt_processing_timeout,ua_config.mt_processing_timeout,OTA and OTA BY OP,no,no,no,no,Configuration to stop mt call when no answer after receiving the INVITE<BR>0:Disable<BR>Unit:sec<BR>,UNSIGNED SHORT,2,,,0,NR15.R3.MD700.MP,,0~255:0:Disable,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-11464,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LTE ignore IR redirection during VoLTE<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+11464,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LTE ignore IR redirection during VoLTE<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
11465,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rsra_status,rsra_status,OTA,no,no,no,no,[MCF][RSRA] RSRA Enable/disable,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,1/0:Enable = 1<BR>Disable = 0,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)"<BR>,Pass,,,,
11466,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rs_initial_delay,rs_initial_delay,OTA,no,no,no,no,[MCF][RSRA] Initial wait time before sending RS<BR>Default value = 1,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,1,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)"<BR>,Pass,,,,
11467,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rs_interval,rs_interval,OTA,no,no,no,no,[MCF][RSRA] RS wait Interval<BR>Default value = 4,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,4,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)"<BR>,Pass,,,,
@@ -10004,7 +10004,7 @@
14128,2437,NVRAM_EF_NRRC_CUSTOM_ENDC_COMB_LIST_LID,"1,2",sa_white_list,sa_white_list,OTA and OTA BY OP,no,no,no,no,[MCF] The white list of SA CA combination for the UE. The maximum number of characters in this field is 1680. Example: n1A-n1A;n3A-n3A;n78A-n78A;n3AA-n78A;n3A-n78AA;n8AA-n78A,CHAR,1680,1680,,0x00,NR15.R3.MD700.MP,,"0~9,A~Z,-",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10<BR>[Init] NA<BR>[Test Step]<BR>1, modify the default value by MCF tool<BR>2, save the modification to OTA file<BR>3, push the OTA file to DUT<BR>4, check the value by NVRAM editor<BR>[Expected Result]<BR>The real value is equal to the modification value",Pass,,,,
14129,2437,NVRAM_EF_NRRC_CUSTOM_ENDC_COMB_LIST_LID,"1,2",white_list,white_list,OTA and OTA BY OP,no,no,no,no,[MCF] The white list of ENDC combination for the UE. Each combination shall be separated by semicolon. The maximum number of characters in this field is 4480. Example: b2AA-n41AA;b2AA-b66A-n71AA;b2AA-b66A-b71AA-n71A,CHAR,4480,4480,,0x00,NR15.R3.MD700.MP,,"0~9,A~Z,-",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10<BR>[Init] NA<BR>[Test Step]<BR>1, modify the default value by MCF tool<BR>2, save the modification to OTA file<BR>3, push the OTA file to DUT<BR>4, check the value by NVRAM editor<BR>[Expected Result]<BR>The real value is equal to the modification value",Pass,,,,
14130,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_PREFER_RPLMN_RAT_FLIGHT_MODE_ONLY,modem_sbp_config[147].SBP_PREFER_RPLMN_RAT_FLIGHT_MODE_ONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Apply prefer rplmn for flight mode only<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
-14131,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",hold_before_add_to_conf,ua_config.hold_before_add_to_conf,OTA and OTA BY OP,no,no,no,no,hold the active call before add it to conf<BR>0: "not hold the active call before add it to conf"<BR>1: "hold the active call before add it to conf"<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,1<BR>0X01:Enable,,,,MD Config,Modem - Customer Requirement,,,As Description of MOLY00602612,Untested,,,,
+14131,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",hold_before_add_to_conf,ua_config.hold_before_add_to_conf,OTA and OTA BY OP,no,no,no,no,hold the active call before add it to conf<BR>0: "not hold the active call before add it to conf"<BR>1: "hold the active call before add it to conf"<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,1<BR>0X01:Enable,,,,MD Config,Modem - Customer Requirement,,,As Description of MOLY00602612,Pass,,,,
14132,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",hold_before_add_to_conf.hold_before_add_to_conf,ua_config.hold_before_add_to_conf.hold_before_add_to_conf,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>hold the active call before add it to conf<BR>bit 0:0:not hold the active call before add it to conf<BR>bit 1:1:hold the active call before add it to conf,BIT,8,,8,0x00,NR15.R3.MD700.MP,,1<BR>0X01:Enable,,,,IMS,IMS,,,[Init] <BR>Register VoLTE in home network<BR>[Test Step]<BR>1. Configure NVRAM "media_ip_type" to 0x02.<BR>2. Make a normal MO call.<BR>[Expected Result]<BR>media type in SDP of INVITE is IPv6,Untested,,,,
14135,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_xMM_ENQUEUE_SIM_REFRESH_DURING_SMS,modem_sbp_config[147].SBP_xMM_ENQUEUE_SIM_REFRESH_DURING_SMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enqueue SIM ERROR during ongoing SMS transaction<BR>bit 0:0:not enabled<BR>bit 1:1:enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"1:Enable : If SBP is enabled, MM and EMM will enqueue SIM ERROR during ongoing SMS transaction and will process SIM ERROR after completion of SMS transaction<BR>0:Disable :If SBP is disabled, MM and EMM will process SIM ERROR and will abort ongoing SMS transaction",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> MUT with inserted SIM <BR> [Test Step]<BR> 1. Turn ON MUT and wait until is attached to network<BR>2. Ask to AT&T team send the SIM refresh command via OTA<BR>3. Wait until AT&T confirms that the command was sent successfully<BR>4. Notice that MUT does not receives the command<BR>5. Ask to AT&T team send the SIM reset command via OTA<BR>6. Wait until AT&T confirms that the command was sent successfully<BR>7. Notice that MUT does not receives the command.<BR>8. Ask to AT&T team send the APNs command via OTA<BR>9. Wait until AT&T confirms that the APNs were sent successfully<BR>10. Notice that MUT does not receives the APNs via OTA<BR> [Expected Result]<BR> MUT must receive the AT&T APNs, SIM refresh and SIM reset commands via OTA.",Pass,,,,
14230,57414,NVRAM_EF_NL1_TX_MAX_TRANSCEIVER_POWER_LIMITATION_LID,1,max_trans_HT,tx_max_trans_pwr_limitation_by_route[0~89].max_trans_HT,OTA,no,no,no,no,[MCF]unit is 1/32 dBm,SHORT,2,,,,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
@@ -10036,6 +10036,7 @@
17205,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[113].SBP_NR_SA_RX_DOWNGRADE,modem_sbp_data_config[113].SBP_NR_SA_RX_DOWNGRADE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR SA RX mimo doengrades<BR>bit 0:0:Align custom file<BR>bit 1:1:NR SA RX mimo doengrades to 2x2<BR>",BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
17206,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[112].SBP_NR_SA_TX_DOWNGRADE,modem_sbp_data_config[112].SBP_NR_SA_TX_DOWNGRADE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR SA TX mimo doengrades<BR>bit 0:0:Align custom file<BR>bit 1:1:NR SA TX mimo doengrades to 1x1<BR>",BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
17207,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_MMRFC_CUSTOMIZED_WCDMA_TXCAP_CAL_BYPASS,modem_sbp_config[147].SBP_MMRFC_CUSTOMIZED_WCDMA_TXCAP_CAL_BYPASS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>to costomize WCDMA TXCAP calibration for QUECTEL<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]META connect<BR>[Test Step]RF caliubration<BR>[Expected Result]Pass,Pass,,,,
+17222,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_IGNORE_TEST_SIM_CHECK_FOR_CUSTOM_BAND_DISABLE_FEATURE,modem_sbp_config[179].SBP_IGNORE_TEST_SIM_CHECK_FOR_CUSTOM_BAND_DISABLE_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>SBP to control if custom band setting to be applied even for Test Sims or not<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
17232,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_NR_BWP_SWITCH,modem_sbp_config[147].SBP_NR_BWP_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR BWP switch on/off feature<BR>bit 0:0:NR BWP Disabled<BR>bit 1:1:NR BWP Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,Default value is on:Customer can disable /enable bwp switch feature,,,,5G option capability update,MTK Proprietary,,,"Test in machine (N)<BR>Test Time (60 minutes)<BR>[Init] NA<BR>[Test Step]<BR>Step1: Use "SBP_NR_BWP_SWITCH" default value ,default value is on ,default BWP is BWP 1# then NW trigger BWP switch to BWP 2#<BR>Step2: Set "SBP_NR_BWP_SWITCH" value as off ,default BWP is BWP 1# then NW trigger BWP switch to BWP 2#<BR>[Expected Result]<BR>Step 1 results: BWP will be switched to BWP <BR>Step 2 results: BWP will be stay at BWP1#",Untested,,,,
17236,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[116].SBP_DISABLE_IGNORE_POWEROFF_COMMON_PROCEDURE,modem_sbp_data_config[116].SBP_DISABLE_IGNORE_POWEROFF_COMMON_PROCEDURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>do not ignore common procedure in power-off case<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled in CT only<BR>bit 2:2:Enabled in all operators",BIT,8,,8,0x00,NR15.R3.MD700.MP,,1:Enabled in CT only<BR>2:Enabled in all operators<BR><BR>0:Disabled 1:Enabled in CT only 2:Enabled in all operators,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
17238,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[148].SBP_TRIGGER_SEARCH_WHEN_OPTION2_ON,modem_sbp_config[148].SBP_TRIGGER_SEARCH_WHEN_OPTION2_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable trigger search after option2 on.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:Disable<BR>1:Enable,,,,[LTE Protocol Baseline]NWSEL_PowerOn,Modem System Test,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]Insert KDDI card and test in KDDI network<BR>[Test Step]<BR>1. Set wrong APN<BR>2. Power up<BR>3. Try to attach LTE but attach reject with ESM cause #27<BR>[Expected Result]<BR>LTE is disabled and try to camp on 3G/2G,Untested,,,,
@@ -10055,6 +10056,8 @@
17985,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_conf_sub.disable_conf_sub,ua_config.disable_conf_sub.disable_conf_sub,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>Disable SUBSCRIBE to conference event package.<BR>bit 0:0:SUBSCRIBE conference event package<BR>bit 1:1:Don't SUBSCRIBE conference event package<BR>,BIT,8,,8,0xff,NR15.R3.MD700.MP,,NA:redundant item,,,,IMS,IMS,,,redundant item,Untested,,,,
18285,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[151].SBP_L5_SEND_EIMSCFG_AUTO,modem_sbp_config[151].SBP_L5_SEND_EIMSCFG_AUTO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>L5 will send AT+EIMSCFG auto when sim card insert<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,Telephony Service (L5U),MTK Proprietary,,,Test in machine (Y/N): N<BR>Test Time (minutes)<BR>[Init]<BR>SBP_L5_SEND_EIMSCFG_AUTO is ON<BR>[Test Step]<BR>reboot device<BR>[Expected Result]<BR>check if L5 send AT+EIMSCFG automatically,Pass,,,,
18290,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR2_FR1TDD_FR1FDD,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR2_FR1TDD_FR1FDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Apply MR(FR2 > FR1 TDD > FR1 FDD)<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,FT in US,Untested,,,,
+18312,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_SKIP_BAND_PRIORITY_FOR_STORED_SCAN,modem_sbp_config[179].SBP_SKIP_BAND_PRIORITY_FOR_STORED_SCAN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore Operator band priority during LTE Frequency Scan<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,,,,,set SBP and check if apply band priority when cell search,Untested,,,,
+18314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_TRIGGER_SEARCH_IN_SHARED_NW_FOR_EMC_ATTACH_FAILURE,modem_sbp_config[179].SBP_TRIGGER_SEARCH_IN_SHARED_NW_FOR_EMC_ATTACH_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not trigger search in a shared network for emergency attach failure<BR>bit 0:0:Feature not enabled<BR>bit 1:1:Feature enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,,,,,No need and RD UT pass,Untested,,,,
18317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_VGMM_RETRY_PAGING_WHEN_GEMINI_FAIL,modem_sbp_config[154].SBP_VGMM_RETRY_PAGING_WHEN_GEMINI_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>retry paging when paging can't get rf resource<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,D-SBP,SBP,,,,Untested,,,,
18321,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[148].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_DIFF,modem_sbp_data_config[148].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_DIFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>diff of NWSEL_PLMN_TIMER_HPLMN_REJ_14",BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
18322,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[149].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_MAX,modem_sbp_data_config[149].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_MAX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the MAX timer value of NWSEL_PLMN_TIMER_HPLMN_REJ_14",BIT,8,,8,0x0c,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -10062,7 +10065,7 @@
18324,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[168].SBP_IMS_REG_MULTI_RETRY,modem_sbp_data_config[168].SBP_IMS_REG_MULTI_RETRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>control IMS REGISTRATION retry strategy<BR>bit 0:0:0: IMS REGISTRATION do not retry on 403 or all pcscf fail.<BR>bit 1:1:1: IMS REGISTRATION retry on 403 and all pcscf fail up to NV setting of max_count.<BR>bit 2:2:2: IMS REGISTRATION retry on NW error rsp up to NV setting of retry mapping table.<BR>",BIT,8,,8,0x00,NR15.R3.MD700.MP,,0~2,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]UE attach CMCC 4G<BR>[Test Step]UE do IMS registration and NW reply error response.<BR>[Expected Result]UE try 3 as setting.,Untested,,,,
18326,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[156].SBP_MRS_AFR_TO_4G_CONTROL,modem_sbp_data_config[156].SBP_MRS_AFR_TO_4G_CONTROL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>AFR_TO_4G Follow NVRAM or Enforce SBP DATA<BR>bit 1:1:AFR to 4G: Follow NVRAM<BR>bit 2:2:AFR to 4G: Enforce ON<BR>bit 4:4:AFR to 4G: Enforce OFF<BR>",BIT,8,,8,0x01,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
18327,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[157].SBP_MRS_AFR_TO_5G_CONTROL,modem_sbp_data_config[157].SBP_MRS_AFR_TO_5G_CONTROL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>AFR_TO_5G Follow NVRAM or Enforce SBP DATA<BR>bit 1:1:AFR to 5G: Follow NVRAM<BR>bit 2:2:AFR to 5G: Enforce ON<BR>bit 4:4:AFR to 5G: Enforce OFF<BR>",BIT,8,,8,0x01,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-18328,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[121].SBP_NR_CA_MAX_UL_CC_NUM,modem_sbp_data_config[121].SBP_NR_CA_MAX_UL_CC_NUM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Maximum number of supported NR UL CCs<BR>bit 1:1:1 NR UL CC<BR>bit 2:2:2 NR UL CC<BR>",BIT,8,,8,0x05,NR15.R3.MD700.MP,,"1~5:NR max UL CC num. 1 means at most UL 1CC, 2 means at most UL 2CC, etc.",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+18328,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[121].SBP_NR_CA_MAX_UL_CC_NUM,modem_sbp_data_config[121].SBP_NR_CA_MAX_UL_CC_NUM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Maximum number of supported NR UL CCs<BR>bit 1:1:1 NR UL CC<BR>bit 2:2:2 NR UL CC<BR>",BIT,8,,8,0x05,NR15.R3.MD700.MP,,"1~5:NR max UL CC num. 1 means at most UL 1CC, 2 means at most UL 2CC, etc.",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
18333,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[128].SBP_PLMN_TIMER_EUTRAN_ABNORMAL,modem_sbp_data_config[128].SBP_PLMN_TIMER_EUTRAN_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the timer period of NWSEL_PLMN_TIMER_EUTRAN_ABNORMAL",BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
18334,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[129].SBP_PLMN_TIMER_EUTRAN_ABNORMAL_DIFF,modem_sbp_data_config[129].SBP_PLMN_TIMER_EUTRAN_ABNORMAL_DIFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>diff of NWSEL_PLMN_TIMER_EUTRAN_ABNORMAL",BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
18335,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[130].SBP_PLMN_TIMER_EUTRAN_ABNORMAL_MAX,modem_sbp_data_config[130].SBP_PLMN_TIMER_EUTRAN_ABNORMAL_MAX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the MAX timer value of NWSEL_PLMN_TIMER_EUTRAN_ABNORMAL",BIT,8,,8,0x0c,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -10102,7 +10105,7 @@
18787,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nr_tacless_bar_cell_timer,nrrc_idle_param.nr_tacless_bar_cell_timer,OTA and OTA BY OP,no,no,no,no,Bar timer when 4G5 redirection to NR TACLESS cell.,UNSIGNED SHORT,2,,,0x12c,NR15.R3.MD700.MP,,0x12c:Maximum up to 900 seconds,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
18794,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[151].SBP_NOT_SEARCH_23G_FULLBAND_WHEN_EMC,modem_sbp_config[151].SBP_NOT_SEARCH_23G_FULLBAND_WHEN_EMC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>DIsable triggering 23G fullband search.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0:disable<BR>1:enable,,,,[LTE Protocol Baseline]NWSEL_PowerOn,Modem System Test,,,Test in machine (Y/N) N<BR>Test Time (minutes) 0<BR>[Init]<BR>[Test Step] set SBP on<BR>[Expected Result] SBP_NOT_SEARCH_23G_FULLBAND_WHEN_EMC TRUE,Untested,,,,
18795,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[163].SBP_ERRC_DISABLE_NR_B1_DURING_EMR_CALL_DOMAIN_SELECT,modem_sbp_config[163].SBP_ERRC_DISABLE_NR_B1_DURING_EMR_CALL_DOMAIN_SELECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip B1-NR when Emergency call domain selection on going<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-18832,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_DISABLE_N5_FOR_FIRSTNET,modem_sbp_config[154].SBP_DISABLE_N5_FOR_FIRSTNET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>AT&T Phase 1b: block n5 if FirstNet SIM inserted<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:0: disable (allow N5)<BR>1: enable (not allow N5),,,,MD Config,Modem - Customer Requirement,,,verified by SBP framework,Untested,,,,
+18832,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_DISABLE_N5_FOR_FIRSTNET,modem_sbp_config[154].SBP_DISABLE_N5_FOR_FIRSTNET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>AT&T Phase 1b: block n5 if FirstNet SIM inserted<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:0: disable (allow N5)<BR>1: enable (not allow N5),,,,MD Config,Modem - Customer Requirement,,,verified by SBP framework,Pass,,,,
18835,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",norm_sits_trans_timer_in_proceeding,ua_config.norm_sits_trans_timer_in_proceeding,OTA and OTA BY OP,no,no,no,no,"Set the INVITE Server transaction transaction_timer in proceeding state for normal MT call.<BR>0: default value , 64*T1<BR>Unit:sec<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.MP,,"0:default value, 64*T1",,,,IMS,IMS,,,1. Configure the NVRAM to 330s.<BR>2. Make a MT call.<BR>3. Don't accept the call until 300s later.<BR>4. check whether the call is accepted successfully.,Pass,,,,
18836,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",norm_sits_trans_timer_in_proceeding.norm_sits_trans_timer_in_proceeding,ua_config.norm_sits_trans_timer_in_proceeding.norm_sits_trans_timer_in_proceeding,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>Set the INVITE Server transaction transaction_timer in proceeding state for normal MT call, unit: sec<BR>bit 0:0:default value , 64*T1",BIT,32,,32,0xff,NR15.R3.MD700.MP,,Any Positive value:Enable the timer,,,,IMS,IMS,,,1. Configure the NVRAM to 330s.<BR>2. Make a MT call.<BR>3. Don't accept the call until 300s later.<BR>4. check whether the call is accepted successfully.,Untested,,,,
18911,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[152].SBP_VGMM_MRU_CARRY_PDU_SESSION_STATUS_IE,modem_sbp_config[152].SBP_VGMM_MRU_CARRY_PDU_SESSION_STATUS_IE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>carry PDU session status IE in MRU<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,1. enable this SBP<BR>2. register SA on cell1<BR>3. close cell1 and open cell2(different TA)<BR>4. UE shall carry PDU session status IE in mobility registration,Pass,,,,
@@ -10156,10 +10159,10 @@
21233,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",wlan_deact_meas_time,comm_ans_cfg.meas_cfg.wlan_deact_meas_time,OTA and OTA BY OP,no,no,no,no,Duration(ms) of measurement delay before WLAN is deactivated,UNSIGNED INT,4,,,0xff,NR15.R3.MD700.MP,,0 ~ 4294967295:units: ms,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"Test in machine (Y)<BR>Test Time (60)<BR><BR>AT+ECFGSET="wlan_deact_meas_time","10000" // 10 sec, increase throttling timer for easy test<BR><BR>[Init]<BR>WiFi enabled<BR>VoWiFi registration done.<BR>VoLTE disabled<BR>[Test Step]<BR>Make VoWiFi call.<BR>Go to area where WiFi signal level is poor.<BR>[Expected Result]<BR>VoWiFi is disconnected and call is dropped after UE has been in poor WiFi signal level for <BR>wlan_deact_meas_time (Ex.10s) defined time.",Untested,,,,
21234,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[161].SBP_ERRC_SKIP_MR_DURING_TAU,modem_sbp_config[161].SBP_ERRC_SKIP_MR_DURING_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip A3/A5 event reporting when TAU is on-going<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0 - feature OFF<BR>1 - feature ON:Skip A3 and A5 MR when feature is ON,,,,,,,,test for EPSFB call in CMCC network,Untested,,,,
21237,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",ul_256qam_r14,ul_256qam_r14,OTA and OTA BY OP,no,no,no,no,[MCF] 3GPP TS 36.331 ul-256QAM-r14,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-21239,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[153].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_WITH_SIM,modem_sbp_config[153].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_WITH_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>User can disable NR band(s) by plmn<BR>bit 0:0:Not enabled this feature<BR>bit 1:1:Enable this feature",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+21239,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[153].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_WITH_SIM,modem_sbp_config[153].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_WITH_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>User can disable NR band(s) by plmn<BR>bit 0:0:Not enabled this feature<BR>bit 1:1:Enable this feature",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
21240,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_node_namespace,xcap_info.remove_node_namespace,OTA and OTA BY OP,no,no,no,no,Remove Node Namespace<BR>0: "Disabled"<BR>1: "Enabled"<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,0:Disabled<BR>1:Enabled,,,,XCAP IMS-SS,XCAP,,,Test in machine Y<BR>Test Time (minutes) 5<BR>[Init]<BR>IMS registered in Softbank/Japan<BR>[Test Step]<BR>enable CFB<BR>[Expected Result]<BR>there is no namespace in "conditions" and "actions" node,Pass,,,,
21241,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_node_namespace.remove_node_namespace,xcap_info.remove_node_namespace.remove_node_namespace,Not Support,no,no,no,no,remove node namespace<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0,NR15.R3.MD700.MP,,int: 0/1,,,,XCAP IMS-SS,XCAP,,,no need,Pass,,,,
-21251,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[153].SBP_NR_CAP_DISABLE_RF_TRACE,modem_sbp_config[153].SBP_NR_CAP_DISABLE_RF_TRACE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable NL1 RF related trace during NR cap get NL1 capability procedure.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:0: disable (print RF capability trace)<BR>1: enable (not print RF capability trace),,,,MD Config,Modem - Customer Requirement,,,verified by SBP framework,Untested,,,,
+21251,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[153].SBP_NR_CAP_DISABLE_RF_TRACE,modem_sbp_config[153].SBP_NR_CAP_DISABLE_RF_TRACE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable NL1 RF related trace during NR cap get NL1 capability procedure.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1:0: disable (print RF capability trace)<BR>1: enable (not print RF capability trace),,,,MD Config,Modem - Customer Requirement,,,verified by SBP framework,Pass,,,,
21296,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[152].SBP_NR_BG_SEARCH_CUSTOM_THRESHOLD,modem_sbp_config[152].SBP_NR_BG_SEARCH_CUSTOM_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR background search check custom threshold<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
21392,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_L5_SIM_DELAY_SEND_READY_WHEN_REFRESH_ONGOING,modem_sbp_config[154].SBP_L5_SIM_DELAY_SEND_READY_WHEN_REFRESH_ONGOING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable delay send sim ready to ap/host<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"1:enable delay send sim ready to host<BR>0:disable delay send sim ready to host, will send inmediately when recv sim_ready_ind.",,,,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time (minutes): 5<BR>[Init]<BR>[Test Step]<BR>insert sim and check ELT MD log<BR>[Expected Result]<BR>MBIM L5IO set the sbp to 1 and check log pass,Pass,,,,
21393,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_RAC_ALWAYS_UPDATE_SAT_LOCATION_INFO,modem_sbp_config[164].SBP_RAC_ALWAYS_UPDATE_SAT_LOCATION_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Allow rac always update SAT location info regardless of NAS state<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
@@ -10347,7 +10350,7 @@
22343,4099,NVRAM_EF_MCF_TEST_OTA_QUERY_LID,"1,2",val_bit_byte_41.val_bit_byte_41,val_bit_byte_41.val_bit_byte_41,OTA and OTA BY OP,no,no,no,no,[MCF]Test 1byte value - 4<BR>8 bits,BIT,8,,8,0x00,NR15.R3.MD700.MP,,any,,,,MCF (Modem Configuration Framework),MCF,,,This parameter is for MCF test (framework part)<BR>Test in machine (Y/N) N<BR>Test Time (minutes) around 0.5 day<BR>[Init] following MCF SQC plan<BR>[Test Step] following MCF SQC plan<BR>[Expected Result]<BR>following MCF SQC plan,Pass,,,,
22344,4099,NVRAM_EF_MCF_TEST_OTA_QUERY_LID,"1,2",val_bit_byte_42,val_bit_byte_42,OTA and OTA BY OP,no,no,no,no,[MCF]Test 1byte value - 4,CHAR,1,,,0x00,NR15.R3.MD700.MP,,any,,,,MCF (Modem Configuration Framework),MCF,,,This parameter is for MCF test (framework part)<BR>Test in machine (Y/N) N<BR>Test Time (minutes) around 0.5 day<BR>[Init] following MCF SQC plan<BR>[Test Step] following MCF SQC plan<BR>[Expected Result]<BR>following MCF SQC plan,Pass,,,,
22345,4099,NVRAM_EF_MCF_TEST_OTA_QUERY_LID,"1,2",val_bit_byte_42.val_bit_byte_42,val_bit_byte_42.val_bit_byte_42,OTA and OTA BY OP,no,no,no,no,[MCF]Test 1byte value - 4<BR>8 bits,BIT,8,,8,0x00,NR15.R3.MD700.MP,,any,,,,MCF (Modem Configuration Framework),MCF,,,This parameter is for MCF test (framework part)<BR>Test in machine (Y/N) N<BR>Test Time (minutes) around 0.5 day<BR>[Init] following MCF SQC plan<BR>[Test Step] following MCF SQC plan<BR>[Expected Result]<BR>following MCF SQC plan,Pass,,,,
-22346,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_evs_based_on_geo_table,ua_config.disable_evs_based_on_geo_table,OTA and OTA BY OP,no,no,no,no,"disable evs based on geo country info,the default is 0 <BR>",STRING,128,128,,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+22346,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_evs_based_on_geo_table,ua_config.disable_evs_based_on_geo_table,OTA and OTA BY OP,no,no,no,no,"disable EVS based on geo country info, the default is 0",STRING,128,128,,0xff,NR15.R3.MD700.MP,,,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>enable this NVRAM and register IMS <BR>[Test Step]<BR>1. make MO call<BR>[Expected Result]<BR>DUT would disable EVS for specific country,Untested,,,,
22347,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_evs_based_on_mcc_table,ua_config.disable_evs_based_on_mcc_table,OTA and OTA BY OP,no,no,no,no," disable evs based on mcc code,the default is 0<BR>",STRING,128,128,,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
22350,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_from_uri_if_pai_missing,ua_config.use_from_uri_if_pai_missing,OTA and OTA BY OP,no,no,no,no,Whether to use the URI in the From header of RP-DATA SIP MESSAGE as the PSI in the later MT RP-ACK SIP MESSAGE<BR>0: use default PSI if there is no P-Asserted-Identity header present in the MT RP-ACK SIP MESSAGE <BR>1: use from header as the PSI if there is no P-Asserted-Identity header present in the MT RP-ACK SIP MESSAGE <BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
22353,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",serv_rsrq_thresh_umts_event,serv_rsrq_thresh_umts_event,OTA and OTA BY OP,no,no,no,no,[MCF]Customized LTE Serving cell RSRQ threshold for UMTS-B1 cell reporting judgement. (qdbm),SHORT,2,,,"0xff, 0x7f,",NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
@@ -10443,6 +10446,7 @@
22737,2389,NVRAM_EF_MRS_RAT_CAPABILITY_CONFIG_LID,1,mnc3,rat_cap_config_list[0~299].splmn.mnc3,OTA,no,no,no,yes,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.MP,,0~15,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
22741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[162].SBP_NAS_SV_GSM_CAP_CONTROL_BY_MRS_CONFIG,modem_sbp_config[162].SBP_NAS_SV_GSM_CAP_CONTROL_BY_MRS_CONFIG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable the feature.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
22742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[162].SBP_RAC_CHANGE_UEMODE_BY_CAP,modem_sbp_config[162].SBP_RAC_CHANGE_UEMODE_BY_CAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable the feature.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+22748,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_session_keep_timer,imc_config.emergency_session_keep_timer,OTA and OTA BY OP,no,no,no,no,[MCF]A timer keep modem in emc mode when ims emergency call end with configuration that emergency dereg not allowed AN:unit: ms,UNSIGNED INT,4,,,0xff,NR15.R3.MD700.MP,,,,,,,,,,Test in machine (Y)<BR>Test Time (2 minutes)<BR>[Init]<BR>CMCC VoLTE NSIOT case 19.4.2<BR>[Test Step]<BR>CMCC VoLTE NSIOT case 19.4.2<BR>[Expected Result]<BR>Case pass,Untested,,,,
22757,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[173].SBP_UE_CAP_SRS_TXPORTSWITCH,modem_sbp_config[173].SBP_UE_CAP_SRS_TXPORTSWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>set supportedSRS_TXPORTSWITCH disable<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"bit: 0/1:TRUE/FALSE selecet by customer<BR>0: false, 1: true",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes): NA<BR>[Init]<BR>[Test Step]<BR>Need to be tested under specific operator, e.g. Docomo<BR>[Expected Result]<BR>srs tx port switch customization is only worked on specific operator, e.g. CMCC",Untested,,,,
22762,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[174].SBP_HIGH_PRIORITY_PAGING_PREEMPT_PEER_TAU,modem_sbp_config[174].SBP_HIGH_PRIORITY_PAGING_PREEMPT_PEER_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Start MSPM_EMM_TAU instead of MSPM_EMM_IRAT_TAU session<BR>bit 0:0:Disabled. Start MSPM_EMM_IRAT_TAU<BR>bit 1:1:Enabled. Start MSPM_EMM_TAU<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,MT call in sim2 when sim1 doing TAU,Untested,,,,
22763,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",rsrp_threshold,hst_cell_param.rsrp_threshold,OTA and OTA BY OP,no,no,no,no,[MCF] custom value of rsrp threshold for hst enhance,SHORT,2,,,"0x48, 0xfe,",NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
@@ -10556,7 +10560,7 @@
23662,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pingpong_4g5_redirect_rsrq_THD,pingpong_4g5_redirect_rsrq_THD,OTA and OTA BY OP,no,no,no,no,[MCF]Customized 4G5 pingpong detection CONN Pcell RSRQ threshold for redirection. (dbm),SHORT,2,,,"0xf2, 0xff,",NR15.R3.MD700.MP,,0xFFFF : Invalid<BR>any negative value is valid,,,,MD Config,Modem - Customer Requirement,,,"[Init]<BR>[Test Step]<BR>4G5 reselection, HO and redirection cases<BR>[Expected result]<BR>If pingpong_count reaches x, UE should not move to 5G",Untested,,,,
23663,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pingpong_4g5_t1,pingpong_4g5_t1,OTA and OTA BY OP,no,no,no,no,[MCF]Customized 4G5 pingpong detection duration T1. (seconds),UNSIGNED SHORT,2,,,"0x2c, 0x01,",NR15.R3.MD700.MP,,0xFFFF : Invalid<BR>any negative value is valid,,,,MD Config,Modem - Customer Requirement,,,"[Init]<BR>[Test Step]<BR>4G5 reselection, HO and redirection cases<BR>[Expected result]<BR>If pingpong_count reaches x, UE should not move to 5G",Untested,,,,
23664,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pingpong_4g5_t2,pingpong_4g5_t2,OTA and OTA BY OP,no,no,no,no,[MCF]Customized 4G5 pingpong detection duration T2. (seconds),UNSIGNED SHORT,2,,,"0x08, 0x07,",NR15.R3.MD700.MP,,0xFFFF : Invalid<BR>any negative value is valid,,,,MD Config,Modem - Customer Requirement,,,"[Init]<BR>[Test Step]<BR>4G5 reselection, HO and redirection cases<BR>[Expected result]<BR>If pingpong_count reaches x, UE should not move to 5G",Untested,,,,
-23670,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_VOWIFI_DISABLE_5G_SA,modem_sbp_config[164].SBP_VOWIFI_DISABLE_5G_SA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable 5G SA when VoWiFi calling for specific operator<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:0: disable<BR>1: enable,,,,MiA (Modem intelligence agent),MiA,,,use MCF tool to modify value for specific operator,Untested,,,,
+23670,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_VOWIFI_DISABLE_5G_SA,modem_sbp_config[164].SBP_VOWIFI_DISABLE_5G_SA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable 5G SA when VoWiFi calling for specific operator<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:0: disable<BR>1: enable,,,,MiA (Modem intelligence agent),MiA,,,use MCF tool to modify value for specific operator,Untested,,,,
23683,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_DISABLE_PAGING_RESPONSE_IN_LIMITED_SIM_ME_LOCK,modem_sbp_config[164].SBP_DISABLE_PAGING_RESPONSE_IN_LIMITED_SIM_ME_LOCK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore paging in limited service state when UE is in SIM-ME lock state<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,"1:When SBP is Enabled, then UE will ignore incoming paging (with IMSI)in limited service state and UE is in SIM-MM lock state.<BR>0:When SBP is disabled, Then UE will allow incoming paging(with IMSI)in limited service state and UE is in SIM-MM lock state",,,,MD Config,Modem - Customer Requirement,,,"- Enable SIMME lock<BR>- Insert invalid card, make sure card is SIMME locked<BR>- Trigger MT call to UE<BR>- Check if MT call fails",Untested,,,,
23696,2391,NVRAM_EF_MRS_VOICE_UNAVAIL_LEAVE_RAT_CONFIG_LID,1,is_valid,is_valid,OTA,no,no,no,yes,"[MCF,RUNTIME]Validity of voice unavail leave rat config table",ENUM,1,,,0x01,NR15.R3.MD700.MP,,,,,,[LTE Protocol Baseline]NWSEL_PowerOn,Modem System Test,,,,Untested,,,,
23697,2391,NVRAM_EF_MRS_VOICE_UNAVAIL_LEAVE_RAT_CONFIG_LID,1,num_of_entry,num_of_entry,OTA,no,no,no,yes,"[MCF,RUNTIME]Number of valid entries",UNSIGNED INT,4,,,"0x1d, 0x00, 0x00, 0x00,",NR15.R3.MD700.MP,,,,,,[LTE Protocol Baseline]NWSEL_PowerOn,Modem System Test,,,,Untested,,,,
@@ -10623,7 +10627,7 @@
24016,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[166].SBP_NWSEL_CLEAR_RPLMN_FOR_HOME_COUNTRY_POWER_ON_SEARCH,modem_sbp_config[166].SBP_NWSEL_CLEAR_RPLMN_FOR_HOME_COUNTRY_POWER_ON_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE clears RPLMN for home country during power on for specific operator.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,Value :<BR>0 : Disabled<BR>1 : Enabled,,,,(VzW) Power-on and SIM Activation,OP Requirement,,,"Scenario-1:<BR>1. Make UE register on Home country PLMN.<BR>2. Then power cycle - UE will clear the RPLMN and search for Home PLMN (EHPLMNs) first, as if there is no RPLMN.<BR>Scenario-2:<BR>1. Make UE register on roaming PLMN.<BR>2. Then power cycle - UE will search from RPLMN and will not clear RPLMN.",Untested,,,,
24017,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_NWSEL_CLEAR_RPLMN_FOR_POWER_ON_SEARCH,modem_sbp_config[165].SBP_NWSEL_CLEAR_RPLMN_FOR_POWER_ON_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE clears RPLMN during power on for specific operator.<BR>bit 0:0:Disabled. UE does not clear RPLMN during power on search<BR>bit 1:1:Enabled. UE clears RPLMN during power on search",BIT,1,,1,0x00,NR15.R3.MD700.MP,,bit: 0/1,,,,(VzW) Power-on and SIM Activation,OP Requirement,,,"1. Make UE register on Home country PLMN.<BR>2. Then power cycle - UE will clear the RPLMN and search for Home PLMN (EHPLMNs) first, as if there is no RPLMN.",Untested,,,,
24018,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_codec_order4,ua_config.UA_call_codec_order4,OTA and OTA BY OP,no,no,no,no,"From IETF RFC 3264, media stream is described by an "m=" line. preferred codec order on the fourth when making an outgoing call.<BR>0:Disable the codec in the list<BR>1:AMR-NB<BR>2:AMR-WB<BR>5:G729<BR>6:PCMA<BR>7:PCMU<BR>17:EVS<BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,0:Disable the codec in the list<BR>1:AMR<BR>2:AMR<BR>5:G729<BR>6:PCMA<BR>7:PCMU<BR>17:EVS,,,,IMS,IMS,,,VoLTE call EVS enabled,Untested,,,,
-24019,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_codec_order4.UA_call_codec_order4,ua_config.UA_call_codec_order4.UA_call_codec_order4,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>prefer codec order.<BR>bit 0:0:Disable the codec in the list<BR>bit 1:1:AMR-NB<BR>bit 2:2:AMR-WB<BR>bit 5:5:G729<BR>bit 6:6:PCMA<BR>bit 7:7:PCMU<BR>bit 17:17:EVS,BIT,8,,8,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+24019,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_codec_order4.UA_call_codec_order4,ua_config.UA_call_codec_order4.UA_call_codec_order4,Not Support,no,no,no,no,[MCF]<BR>prefer codec order.<BR>bit 0:0:Disable the codec in the list<BR>bit 1:1:AMR-NB<BR>bit 2:2:AMR-WB<BR>bit 5:5:G729<BR>bit 6:6:PCMA<BR>bit 7:7:PCMU<BR>bit 17:17:EVS,BIT,8,,8,0xff,NR15.R3.MD700.MP,,,,,,IMS,IMS,,,,Untested,,,,
24025,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",dns_force_query,http_info.dns_force_query,OTA and OTA BY OP,no,no,no,no,"Force DNS query in AP mode for new PDN connection. When this flag is set, HTTP module pass it to DNS module and it should trigger new DNS query",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,int/short/long: 00~01,,,,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
24028,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",send_media_mod_after_active,ua_config.send_media_mod_after_active,OTA and OTA BY OP,no,no,no,no,"VILTE call will receive 183 from NET with video port=0,the NET upgrade with update<BR>0:default value and is closed<BR>1:on",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.MP,,0:disable,,,,IMS,IMS,,,"[Init] UE support ViLTE<BR>[Test Step]<BR>make ViLTE call<BR>[Expected Result]<BR>when call is establishing, UI will always on ViLTE",Untested,,,,
24051,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_5G_SA_ROHC_IP_PROFILE_SUPPORT,modem_sbp_config[165].SBP_5G_SA_ROHC_IP_PROFILE_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>5G SA ROHC IP profile support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
@@ -10679,7 +10683,7 @@
25648,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",srv_sinr_th,meas_mob_performance.lte_B1_B2_force_th_vonr.srv_sinr_th,OTA and OTA BY OP,no,no,no,no,"serving cell sinr threshold, unit: qdB , range: -100~160, disable: 0x8000.",SHORT,2,,,"0x00, 0x80,",NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
25649,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[171].SBP_NR_CUSTOM_A2_THRESH_ADJUST_FOR_VONR,modem_sbp_config[171].SBP_NR_CUSTOM_A2_THRESH_ADJUST_FOR_VONR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>additional pcell custom thresh and a2 threshold for A2 report when under VoNR ongoing<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
25650,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_NR_TO_LTE_B1B2_CUSTOM_CELL_THRESH_FOR_VONR,modem_sbp_config[170].SBP_NR_TO_LTE_B1B2_CUSTOM_CELL_THRESH_FOR_VONR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>additional pcell/ncell custom threshold check for B1/B2 report when under VoNR ongoing<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-25651,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_VGMM_BYPASS_SR_BLOCK_IN_CONNECTED,modem_sbp_config[170].SBP_VGMM_BYPASS_SR_BLOCK_IN_CONNECTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable VGMM bypss SR block in connected<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:default off,,,,MD Config,Modem - Customer Requirement,,,run VGMM gtest,Untested,,,,
+25651,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_VGMM_BYPASS_SR_BLOCK_IN_CONNECTED,modem_sbp_config[170].SBP_VGMM_BYPASS_SR_BLOCK_IN_CONNECTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable VGMM bypss SR block in connected<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1:default off,,,,MD Config,Modem - Customer Requirement,,,run VGMM gtest,Pass,,,,
25681,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_ENABLE_LTE_BLER_REPORT,modem_sbp_config[169].SBP_ENABLE_LTE_BLER_REPORT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable LTE PDSCH/PUSCH BLER report<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
25688,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[171].SBP_OP12_ONSITE_LTE_UICC,modem_sbp_config[171].SBP_OP12_ONSITE_LTE_UICC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>this SIM is OP12 onsite UICC<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
25700,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",allow_ims_with_vonr_switch_off,profile_emerg.allow_ims_with_vonr_switch_off,OTA BY OP,no,no,no,yes,To allow request IMS emergency MO even if vonr switch is off,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.MP,,0/1,,,,,,,,1) VoNR switch OFF<BR>2) Trigger emergency call and UE shouldn't attempt call on NR RAT,Untested,,,,
@@ -10716,6 +10720,7 @@
25828,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_bands,enable_list_for_national_roaming.plmn_list[0~9].sa_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.MP,,int:1~1024,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
25829,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_band_num,enable_list_for_national_roaming.plmn_list[0~9].sa_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of sa bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
25830,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",plmn_num,enable_list_for_national_roaming.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 10),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,int:1~10,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+25856,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_ENABLE_CUSTOM_BAR_TIME_FOR_FAKE_CELL,modem_sbp_config[179].SBP_ENABLE_CUSTOM_BAR_TIME_FOR_FAKE_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable Custom Bar time for fake cell<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
25858,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_GMSS_NO_SIM_SKIP_LTE_NR_SEARCH,modem_sbp_config[178].SBP_GMSS_NO_SIM_SKIP_LTE_NR_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip LTE/NR limited search when no SIM is inserted<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
25859,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_v_media_c_if_a_inactive,ua_config.rm_v_media_c_if_a_inactive,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
25860,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_v_media_c_if_a_inactive.rm_v_media_c_if_a_inactive,ua_config.rm_v_media_c_if_a_inactive.rm_v_media_c_if_a_inactive,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>Remove the video media-level c line if remote video rtp direction is inactive<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>,BIT,8,,8,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
@@ -10748,7 +10753,7 @@
27112,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",errc_cel_low_resel_priority_time_out,errc_cel_low_resel_priority_time_out,OTA and OTA BY OP,no,no,no,no,[MCF] Customized VZW NAS PROC FAIL Low priority timer (s),UNSIGNED CHAR,1,,,0x0a,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
27186,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[164].SBP_AT_URC_REPORT_MODE,modem_sbp_data_config[164].SBP_AT_URC_REPORT_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Control the AT URC report mode<BR>bit 0:0:Block all URCs until MD receives any AT commands<BR>bit 1:1:As long as the report condition is met, the URC will be reported<BR>bit 2:2:Block all the URCs except +EIND:128 until MD receives any AT commands.",BIT,8,,8,0x01,NR15.R3.MD700.MP,,0~2,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (5 minutes)<BR>[Init] use default value<BR>[Test Step] check if all URCs report when the condition is met<BR>[Expected Result] Can receive expected URC,Untested,,,,
27188,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[173].SBP_DISC_STK_CALL_DURING_EM_CALL,modem_sbp_config[173].SBP_DISC_STK_CALL_DURING_EM_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disconnect STK call when triggered during an ongoing Emergency call<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,1) Dial emergency call in CS domain<BR>2) Dial STK call with type as "Disconnect another call"<BR>3) Emergency call shouldn't end,Untested,,,,
-27216,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_put_cb_root,xcap_info.support_put_cb_root,OTA and OTA BY OP,no,no,no,no,When enabled whole xml is sent when activate/deactivate call barring,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,char: any:disable/enable,,,,XCAP IMS-SS,XCAP,,,Enable flag and activate/deactivate call barring and check xml container from logs. Whole xml should exist instead of one rule,Untested,,,,
+27216,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_put_cb_root,xcap_info.support_put_cb_root,OTA and OTA BY OP,no,no,no,no,When enabled whole xml is sent when activate/deactivate call barring,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,char: any:disable/enable,,,,XCAP IMS-SS,XCAP,,,Enable flag and activate/deactivate call barring and check xml container from logs. Whole xml should exist instead of one rule,Pass,,,,
27219,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_put_cb_root.support_put_cb_root,xcap_info.support_put_cb_root.support_put_cb_root,Not Support,no,no,no,no,Support PUT the Whole CB Node<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0x00,NR15.R3.MD700.MP,,bit: 0/1:enabled/disabled,,,,XCAP IMS-SS,XCAP,,,activate or deactivate call barring.<BR>If config is enable whole xml is send to network<BR>if config is disabled only one rule send to network<BR><BR>result need to review from logs,Untested,,,,
27233,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_omit_cp_prefix_and_namespace,xcap_info.support_omit_cp_prefix_and_namespace,OTA and OTA BY OP,no,no,no,no,Support omitting cp-prefix and namespace,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,0x00/0x01:Disabled/Enabled,,,,XCAP IMS-SS,XCAP,,,[Test Step] None,Pass,,,,
27234,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_omit_cp_prefix_and_namespace.support_omit_cp_prefix_and_namespace,xcap_info.support_omit_cp_prefix_and_namespace.support_omit_cp_prefix_and_namespace,Not Support,no,no,no,no,Support omitting cp-prefix and namespace<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0,NR15.R3.MD700.MP,,0/1:Disabled/Enabled,,,NA,XCAP IMS-SS,XCAP,,,Basic Call Forwarding test set,Pass,,,,
@@ -10797,13 +10802,16 @@
30022,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",apply_3g_sunset_call_spec,ua_config.apply_3g_sunset_call_spec,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>This is for softbank to support old or new requirement based on 3g sunset.<BR>bit 0:0:To support old requirement<BR>bit 1:1:To support new requirement<BR><BR>This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR><BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,0 or 1,,,,IMS,IMS,,,"This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR>",Untested,,,,
30023,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",apply_3g_sunset_call_spec.apply_3g_sunset_call_spec,ua_config.apply_3g_sunset_call_spec.apply_3g_sunset_call_spec,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>This is for softbank to support old or new requirement based on 3g sunset.<BR>bit 0:0:To support old requirement<BR>bit 1:1:To support new requirement<BR><BR>This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR><BR>",BIT,8,,8,0xff,NR15.R3.MD700.MP,,0 or 1,,,,IMS,IMS,,,"This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR>",Untested,,,,
30042,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_L5UCC_AUTO_RESUME_CALL_FEATURE_CONFIG,modem_sbp_config[177].SBP_L5UCC_AUTO_RESUME_CALL_FEATURE_CONFIG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Auto Resume Call Feature config<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-30109,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_BYPASS_SIM_TYPE_CHECK_FOR_ECALL_MODE_SWITCH,modem_sbp_config[177].SBP_BYPASS_SIM_TYPE_CHECK_FOR_ECALL_MODE_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>bypass SIM type check<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] <BR>1. Insert ecall only card<BR>2. open SBP<BR>3. ecall mode switch set<BR>[Expected Result] The return of set is OK,Untested,,,,
+30109,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_BYPASS_SIM_TYPE_CHECK_FOR_ECALL_MODE_SWITCH,modem_sbp_config[177].SBP_BYPASS_SIM_TYPE_CHECK_FOR_ECALL_MODE_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>bypass SIM type check<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x00/0x01,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] <BR>1. Insert ecall only card<BR>2. open SBP<BR>3. ecall mode switch set<BR>[Expected Result] The return of set is OK,Untested,,,,
30124,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_ENABLE_PARTIAL_BAND_IN_USA,modem_sbp_config[177].SBP_ENABLE_PARTIAL_BAND_IN_USA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable partial bands setting under USA mcc.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30442,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_VGMM_CARRY_UE_USAGE_SETTING_IE,modem_sbp_config[177].SBP_VGMM_CARRY_UE_USAGE_SETTING_IE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>carry UE's usage setting IE in registration request<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,1:enabled<BR>0:Disalbed,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
30518,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",reject_wifi_emerg_while_roaming,profile_emerg.reject_wifi_emerg_while_roaming,OTA BY OP,no,no,no,yes,To reject WIFI emergency call while UE is roaming,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30519,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",avai_time_for_lbs_to_geo,ua_config.avai_time_for_lbs_to_geo,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED INT,4,,,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30520,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",avai_time_for_lbs_to_geo.avai_time_for_lbs_to_geo,ua_config.avai_time_for_lbs_to_geo.avai_time_for_lbs_to_geo,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>IMS will send +EIMSGEO with coordinates when receiving information from LBS in this specified time<BR>bit 5:5:5s time window<BR>,BIT,32,,32,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30540,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_subscribe_when_receive_489.not_subscribe_when_receive_489,ua_config.not_subscribe_when_receive_489.not_subscribe_when_receive_489,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>Whether continue do reg-event subscribe when receive 489 for subscribe<BR>bit 0:0:Continue to send reg event SUBSCRIBE<BR>bit 1:1:Not continue to send reg event SUBSCRIBE,BIT,8,,8,0xff,NR15.R3.MD700.MP,,char: any,,,,IMS,IMS,,,Test in machine (Y/N):yes<BR>Test Time (minutes):1mins<BR>[Init]VoLTE sim<BR>[Test Step]<BR>IMS registration with VoLTE supported SIM<BR>[Expected Result]<BR>UE should not send subscribe for reg event when received 489 error,Untested,,,,
+30564,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_DISABLE_NR_SERVICE_AVAILABILITY,modem_sbp_config[179].SBP_DISABLE_NR_SERVICE_AVAILABILITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable NR RAT after emergency call disconnect<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+30565,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",n1_rat_disable_timer_min,profile_common.n1_rat_disable_timer_min,OTA BY OP,no,no,no,yes,To disable n1 after emergency call disconnect for certain duration - Minute,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+30566,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",n1_rat_disable_timer_sec,profile_common.n1_rat_disable_timer_sec,OTA BY OP,no,no,no,yes,To disable n1 after emergency call disconnect for certain duration - Second,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30575,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",report_ssac_bar_when_ssac_barring,profile_normal.report_ssac_bar_when_ssac_barring,OTA BY OP,no,no,no,yes,To report SSAC bar to AP when SSAC barring in LTE,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30587,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_3GPP_DEC_2018_BASED_CSS_MONITORING,modem_sbp_config[178].SBP_3GPP_DEC_2018_BASED_CSS_MONITORING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Monitor CSS with 3GPP DEC-2018 based standard.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.MP,,0x1:Enabled<BR>0x0:Disabled,,,,BWP,BWP,,,IODT with Samsung / Ericsson to test under TDM BWP related cases.,Untested,,,,
30637,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_NR_CP_LATENCY_SR_DELAY_TIMER,modem_sbp_config[177].SBP_NR_CP_LATENCY_SR_DELAY_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable SR delay timer default setting for resume and re-est.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit:0/1,,,,R15 baseline 5G,5G Baseline,,,none,Untested,,,,
@@ -10818,4 +10826,11 @@
30780,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_CLI_VALIDITY_INTERWORK_WHEN_CLI_CAUSE_NP_PI_RECEIVED_NO_NUM,modem_sbp_config[178].SBP_CLI_VALIDITY_INTERWORK_WHEN_CLI_CAUSE_NP_PI_RECEIVED_NO_NUM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To send cli_validity as interwork<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30795,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_with_org_codec_if_488_vport_0,ua_config.retry_ims_voice_with_org_codec_if_488_vport_0,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
30796,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_with_org_codec_if_488_vport_0.retry_ims_voice_with_org_codec_if_488_vport_0,ua_config.retry_ims_voice_with_org_codec_if_488_vport_0.retry_ims_voice_with_org_codec_if_488_vport_0,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>When making a MO video call and receive 488 with video port 0, retry IMS voice directly by IMS UA with original codecs<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>",BIT,8,,8,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
-30848,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_ENABLE_KDDI_N41_30M_AND_50M,modem_sbp_config[178].SBP_ENABLE_KDDI_N41_30M_AND_50M,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KDDI n41 BW for 30M and 50M<BR>bit 0:0:Disable<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+30848,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_ENABLE_KDDI_N41_30M_AND_50M,modem_sbp_config[178].SBP_ENABLE_KDDI_N41_30M_AND_50M,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KDDI n41 BW for 30M and 50M<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,UE capability eport,Pass,,,,
+30916,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mt_no_prcd_in_sip,ua_config.mt_no_prcd_in_sip,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+30917,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mt_no_prcd_in_sip.mt_no_prcd_in_sip,ua_config.mt_no_prcd_in_sip.mt_no_prcd_in_sip,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>If mt reINVITE without prcd in sip, but include qos in sdp, send resp without qos.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,8,,8,0xff,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+31132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_BAND66_UL_EARFCN_CUSTOMIZATION_FOR_US_AND_NON_US_OPERATORS,modem_sbp_config[179].SBP_BAND66_UL_EARFCN_CUSTOMIZATION_FOR_US_AND_NON_US_OPERATORS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable partial bands setting under for US and NON-US mcc.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+31299,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[169].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,modem_sbp_data_config[169].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Controls Local Release mechanism to enable 5G SA after VoWIFI call ends<BR>bit 0:0:0: No Local Release<BR>bit 1:1:1: Local release only<BR>bit 2:2:2: Local release + NR Search<BR>",BIT,8,,8,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+31399,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_ERRC_IGNORE_PLMN_WHEN_BAND_MISMATCH_WITH_UNSUPPORTED_BAND,modem_sbp_config[179].SBP_ERRC_IGNORE_PLMN_WHEN_BAND_MISMATCH_WITH_UNSUPPORTED_BAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable icmp ping DL traffic <BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+31606,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_CUSTOM_SETTING_FOR_SMS_OVER_NAS5G_SUPPORT,modem_sbp_config[179].SBP_CUSTOM_SETTING_FOR_SMS_OVER_NAS5G_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Custom setting for SMS over NAS 5G support<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
+31661,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[173].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA_NR,modem_sbp_config[173].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA_NR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Obsolete ,This feature is renamed here to make it obsolete and redefined in sbp_data.def<BR>bit 0:0:N/A<BR>bit 1:1:N/A<BR>",BIT,1,,1,0x00,NR15.R3.MD700.MP,,,,,,,,,,,Untested,,,,
diff --git a/mcu/custom/service/nvram/errc_nvram_def.c b/mcu/custom/service/nvram/errc_nvram_def.c
index 091f370..933a6e7 100755
--- a/mcu/custom/service/nvram/errc_nvram_def.c
+++ b/mcu/custom/service/nvram/errc_nvram_def.c
@@ -1881,6 +1881,7 @@
0xFF, //pref_nbr_cell_offset_rsrp (qdbm)
0xFF, //pref_nbr_cell_offset_rsrq (qdb)
0xFF, //pref_cell_disable_timer_val (sec)
+ 0x0A, //errc_cel_low_resel_priority_time_out in seconds
/* 4g5 reselection pingpong enhancement */
KAL_FALSE, //pingpong_4g5_config_valid
0xFF92, // pingpong_4g5_pcell_rsrp_th_IDLE (-110 dbm)
@@ -3658,8 +3659,16 @@
0x01 //non_contiguous_ul_ra_with_cc_info_r10
},
#if (CUR_GEN >= MD_GEN97)
- 0xFFFE0000, //feature_group_ind_r10_fdd
- 0xFFFE0000, //feature_group_ind_r10_tdd
+#ifdef __DISABLE_FGI_115_FOR_FOXCONN__
+ 0xFFFC0000 &
+#endif
+ 0xFFFE0000,//feature_group_ind_r10_fdd
+
+#ifdef __DISABLE_FGI_115_FOR_FOXCONN__
+ 0xFFFC0000 &
+#endif
+ 0xFFFE0000,//feature_group_ind_r10_tdd
+
#else
0xEA3C0000, //feature_group_ind_r10_fdd
0xEA3C0000, //feature_group_ind_r10_tdd
diff --git a/mcu/interface/l1/el1/external/md97/rf_custom/src/drdi/ltpcdrdi_ext.c b/mcu/interface/l1/el1/external/md97/rf_custom/src/drdi/ltpcdrdi_ext.c
index ab48368..3e9af16 100755
--- a/mcu/interface/l1/el1/external/md97/rf_custom/src/drdi/ltpcdrdi_ext.c
+++ b/mcu/interface/l1/el1/external/md97/rf_custom/src/drdi/ltpcdrdi_ext.c
@@ -6055,6 +6055,18 @@
};
+#if defined (__TX_LOW_GEAR_DC2DC_MODIFICATION__)
+const kal_bool EL1D_TPC_DC2DC_OPTION = KAL_FALSE;
+const kal_uint8 EL1D_TPC_DC2DC_SET_VALUE[DC2DC_SET_NUM] = {17, 17, 17, 17}; //Unit: 0.1V, G0~G3
+const MML1_TPC_OTA_UPDATE_DC2DC_T EL1D_TPC_OTA_UPDATE_DC2DC_TABLE[] =
+{
+ /* comp_route drdi_set*/
+ { 0, 0}, // LTE B1
+ { 6, 0} // LTE B7
+};
+const kal_uint32 EL1D_TPC_OTA_UPDATE_DC2DC_TABLE_SIZE = sizeof(EL1D_TPC_OTA_UPDATE_DC2DC_TABLE) / sizeof(MML1_TPC_OTA_UPDATE_DC2DC_T);
+const kal_uint32 EL1D_TPC_DC2DC_SET_VALUE_SIZE = sizeof(EL1D_TPC_DC2DC_SET_VALUE) / sizeof(kal_uint8);
+#endif
/*******************************************************************************
* Local Variables
diff --git a/mcu/interface/l1/nl1/external/md97/rf_custom/src/rfd_ext/drdi/nr_tpc_drdi_ext.c b/mcu/interface/l1/nl1/external/md97/rf_custom/src/rfd_ext/drdi/nr_tpc_drdi_ext.c
index a68c780..dd0d4e7 100755
--- a/mcu/interface/l1/nl1/external/md97/rf_custom/src/rfd_ext/drdi/nr_tpc_drdi_ext.c
+++ b/mcu/interface/l1/nl1/external/md97/rf_custom/src/rfd_ext/drdi/nr_tpc_drdi_ext.c
@@ -4073,4 +4073,17 @@
};
+#if defined (__TX_LOW_GEAR_DC2DC_MODIFICATION__)
+const kal_bool NL1_TPC_DC2DC_OPTION = KAL_FALSE;
+const kal_uint8 NL1_TPC_DC2DC_SET_VALUE[DC2DC_SET_NUM] = {17, 17, 17, 17}; //Unit: 0.1V, G0~G3
+const MML1_TPC_OTA_UPDATE_DC2DC_T NL1_TPC_OTA_UPDATE_DC2DC_TABLE[] =
+{
+ /* comp_route drdi_set*/
+ { 0, 0}, // NR N1
+ { 1, 0} // NR N3
+};
+const kal_uint32 NL1_TPC_OTA_UPDATE_DC2DC_TABLE_SIZE = sizeof(NL1_TPC_OTA_UPDATE_DC2DC_TABLE) / sizeof(MML1_TPC_OTA_UPDATE_DC2DC_T);
+const kal_uint32 NL1_TPC_DC2DC_SET_VALUE_SIZE = sizeof(NL1_TPC_DC2DC_SET_VALUE) / sizeof(kal_uint8);
+#endif
+
diff --git a/mcu/interface/service/nvram/errc_nvram_def.h b/mcu/interface/service/nvram/errc_nvram_def.h
index 908147d..b556e46 100755
--- a/mcu/interface/service/nvram/errc_nvram_def.h
+++ b/mcu/interface/service/nvram/errc_nvram_def.h
@@ -758,13 +758,13 @@
// VERNO
#define NVRAM_EF_ERRC_STORED_CARRIER_LID_VERNO "001"
-#define NVRAM_EF_ERRC_PERFORMANCE_PARA_LID_VERNO "152"
+#define NVRAM_EF_ERRC_PERFORMANCE_PARA_LID_VERNO "249"
#define NVRAM_EF_ERRC_FINGER_PRINT_LID_VERNO "000"
#define NVRAM_EF_ERRC_LEARNED_MCC_LID_VERNO "002"
#define NVRAM_EF_ERRC_STORED_CELL_LID_VERNO "000"
#define NVRAM_EF_ERRC_AFR_SETTING_LID_VERNO "000"
#define NVRAM_EF_LTE_CAP_LID_VERNO "006"
-#define NVRAM_EF_UE_EUTRA_CAP_CSFB_LID_VERNO "094"
+#define NVRAM_EF_UE_EUTRA_CAP_CSFB_LID_VERNO "115"
#define NVRAM_EF_LTE_FEATURE_CTRL_LID_VERNO "008"
#define NVRAM_EF_ERRC_LTE_SCAN_ENHANCE_LID_VERNO "000"
#define NVRAM_EF_ERRC_CUSTOM_CA_COMB_LIST_LID_VERNO "003"
@@ -784,13 +784,13 @@
// HASH Key
#define NVRAM_EF_ERRC_STORED_CARRIER_LID_HASH 0x7838F31D
-#define NVRAM_EF_ERRC_PERFORMANCE_PARA_LID_HASH 0xFBE19466
+#define NVRAM_EF_ERRC_PERFORMANCE_PARA_LID_HASH 0x4B4A0A89
#define NVRAM_EF_ERRC_FINGER_PRINT_LID_HASH 0xB5073E01
#define NVRAM_EF_ERRC_LEARNED_MCC_LID_HASH 0x1FBD203D
#define NVRAM_EF_ERRC_STORED_CELL_LID_HASH 0xBBEAD2B4
#define NVRAM_EF_ERRC_AFR_SETTING_LID_HASH 0x620CF1D2
#define NVRAM_EF_LTE_CAP_LID_HASH 0xC16E0E1D
-#define NVRAM_EF_UE_EUTRA_CAP_CSFB_LID_HASH 0xB07E409D
+#define NVRAM_EF_UE_EUTRA_CAP_CSFB_LID_HASH 0x7B5C2A2A
#define NVRAM_EF_LTE_FEATURE_CTRL_LID_HASH 0xA50E0EE4
#define NVRAM_EF_ERRC_LTE_SCAN_ENHANCE_LID_HASH 0x45449907
#define NVRAM_EF_ERRC_CUSTOM_CA_COMB_LIST_LID_HASH 0xFAF0879F
diff --git a/mcu/interface/service/nvram/errc_nvram_editor.h b/mcu/interface/service/nvram/errc_nvram_editor.h
index b55a348..ad56197 100755
--- a/mcu/interface/service/nvram/errc_nvram_editor.h
+++ b/mcu/interface/service/nvram/errc_nvram_editor.h
@@ -1069,6 +1069,8 @@
kal_uint8 pref_nbr_cell_offset_rsrp;
kal_uint8 pref_nbr_cell_offset_rsrq;
kal_uint8 pref_cell_disable_timer_val;
+ kal_uint8 errc_cel_low_resel_priority_time_out;
+
/* 4G5 reselection pingpong enhancement */
kal_bool pingpong_4g5_config_valid;
kal_int16 pingpong_4g5_pcell_rsrp_th_IDLE ;
@@ -2555,6 +2557,7 @@
pref_nbr_cell_offset_rsrp:"[MCF]Customized NR neighbor cell RSRP added offset (qdbm)"{};
pref_nbr_cell_offset_rsrq:"[MCF]Customized NR neighbor cell RSRQ added offset (qdb)"{};
pref_cell_disable_timer_val:"[MCF]Customized NR neighbor cell reporting disable time (Sec)"{};
+ errc_cel_low_resel_priority_time_out:"[MCF] Customized VZW NAS PROC FAIL Low priority timer (s)"{};
pingpong_4g5_config_valid:"[MCF]Customized 4G5 pingpong detection configuration status. (boolean)"{};
pingpong_4g5_pcell_rsrp_th_IDLE:"[MCF]Customized 4G5 pingpong detection IDLE Serving cell RSRP threshold (dbm)"{};
diff --git "a/mcu/make/projects/MOBILETEK35_IVT_T800\050NLWG_WIDE_TEMP_CUSTOM\051.mak" "b/mcu/make/projects/MOBILETEK35_IVT_T800\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
index 16aed49..174f298 100755
--- "a/mcu/make/projects/MOBILETEK35_IVT_T800\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
+++ "b/mcu/make/projects/MOBILETEK35_IVT_T800\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
@@ -3182,10 +3182,10 @@
HW_VER = MOBILETEK35_IVT_T800_HW
-ORIGINAL_VERNO = MOLY.NR15.R3.MD700.MP.V75.T21
+ORIGINAL_VERNO = MOLY.NR15.R3.MD700.MP.V75.P7
-VERNO = MOLY.NR15.R3.MD700.MP.V75.T21
-CUSTOMER_LABEL = MOLY.NR15.R3.MD700.MP.V75_MOBILETEK35.IVT.T800_T21
+VERNO = MOLY.NR15.R3.MD700.MP.V75.P7
+CUSTOMER_LABEL = MOLY.NR15.R3.MD700.MP.V75_MOBILETEK35.IVT.T800_P7
# *************************************************************************
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_P7.EDB b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_P7.EDB
new file mode 100644
index 0000000..a7255c9
--- /dev/null
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_P7.EDB
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_T21.EDB b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_T21.EDB
deleted file mode 100644
index c9cffd4..0000000
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_T21.EDB
+++ /dev/null
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_P7.EDB.check b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_P7.EDB.check
new file mode 100644
index 0000000..ba5b3cc
--- /dev/null
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_P7.EDB.check
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_T21.EDB.check b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_T21.EDB.check
deleted file mode 100644
index 451d1a6..0000000
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_MP_V75_T21.EDB.check
+++ /dev/null
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
index 3bf8b53..3761513 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libemm.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libemm.a
index b80988d..a9c948b 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libemm.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libemm.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc.a
index babb361..aa8f496 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc_sec.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc_sec.a
index 526ff0e..27b331b 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc_sec.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liberrc_sec.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libetc.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libetc.a
index f516f74..4b545ec 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libetc.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libetc.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgas_fdd.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgas_fdd.a
index 4b8dd47..94e14cc 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgas_fdd.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgas_fdd.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss.a
index 793785c..d48696b 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss_sec.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss_sec.a
index 5563edb..5a724f8 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss_sec.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libgmss_sec.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl4.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl4.a
index f8563ce..0981146 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl4.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl4.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
index 9142c05..bac3a94 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblbs.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblbs.a
index 6566f6b..7ffe186 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblbs.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblbs.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblpp.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblpp.a
index 37c0127..1110189 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblpp.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liblpp.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libmrs.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libmrs.a
index 2bb797b..632c3c9 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libmrs.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libmrs.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_common_utility.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_common_utility.a
index 635e851..0ad5d50 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_common_utility.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_common_utility.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_sv.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_sv.a
index 231b6fd..b4fce90 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_sv.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnas_sv.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnrrc.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnrrc.a
index 0d1b377..3ceacc0 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnrrc.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnrrc.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnwsel.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnwsel.a
index f718355..3f09779 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnwsel.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnwsel.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsim.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsim.a
index a7901a4..3519536 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsim.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsim.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsmic.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsmic.a
index f4b79c5..3e34658 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsmic.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libsmic.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libupds.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libupds.a
index caa0230..59c006f 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libupds.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libupds.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liburr_fdd.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liburr_fdd.a
index 47db867..352a529 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liburr_fdd.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/liburr_fdd.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm.a
index e655b39..fab9091 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm_protect.a b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm_protect.a
index 0f41445..4102ab4 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm_protect.a
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libvgmm_protect.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
index 9a5e35d..01b9d2d 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_MP_V75_T21_2023_09_28_09_53 b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_MP_V75_P7_2023_10_18_11_55
similarity index 97%
rename from mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_MP_V75_T21_2023_09_28_09_53
rename to mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_MP_V75_P7_2023_10_18_11_55
index d601479..e372a8a 100644
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_MP_V75_T21_2023_09_28_09_53
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_MP_V75_P7_2023_10_18_11_55
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
index 054e54d..59a80d5 100755
--- a/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
+++ b/mcu/mtk_rel/MOBILETEK35_IVT_T800/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
Binary files differ
diff --git a/mcu/service/nvram/src/nvram_cache_white_list.c b/mcu/service/nvram/src/nvram_cache_white_list.c
index f9f8438..76288a9 100755
--- a/mcu/service/nvram/src/nvram_cache_white_list.c
+++ b/mcu/service/nvram/src/nvram_cache_white_list.c
@@ -96,19 +96,13 @@
kal_uint16 prewrite_white_list_amount = sizeof(pre_write_white_list)/sizeof(kal_uint32);
kal_uint32 bypass_cache_w_list[]= {
- 60184, /*NVRAM_EF_AST_TL1_TAS_CUSTOM_PARAMES_LID 0xEB18*/
1538, /*NVRAM_EF_FAILURE_LIST_LID 0x602*/
- 1536, /*NVRAM_EF_EPSLOCI_EPSNSC_TIN_LID 0x600*/
1539, /*NVRAM_EF_T3402_INFO_LID 0x603*/
- 1349, /*NVRAM_EF_HVOLTE_E911_LID 0x545*/
1537, /*NVRAM_EF_LTE_PREFERENCE_LID 0x601*/
61217, /*NVRAM_EF_RAC_PREFERENCE_LID 0xEF21*/
1351, /*NVRAM_EF_IMS_PROVISIONING_PROFILE_LID 0x547*/
- 4, /*NVRAM_EF_UMTS_START_HFN_TDD_LID*/
- 3, /*NVRAM_EF_UMTS_START_HFN_FDD_LID*/
61219, /*NVRAM_EF_SYSSEL_SETTING_LID 0xEF23*/
61226, /*NVRAM_EF_PS_SIM_MAP_LID 0xEF2A*/
- 61203, /*NVRAM_EF_MS_SECURITY_LID 0xEF13*/
61202, /*NVRAM_EF_SIM_LOCK_LID 0xEF12*/
61231, /*NVRAM_EF_SML_GBLOB_LID 0xEF2F*/
61201, /*NVRAM_EF_SML_LID 0xEF11*/