Gitiles
Code Review Sign In
192.168.1.100 / T800_MD / 04730939d77d4b1fce91df3083777d88f0b04c4a / . / mcu / custom / service / flc2 / custom_flc_config.h
blob: 94e27a864ae96d9b01f6ea89fac5dc6d92b63228 [file] [log] [blame]
rjw6c1fd8f2022-11-30 14:33:01 +0800[diff] [blame]1/*****************************************************************************
2* Copyright Statement:
3* --------------------
4* This software is protected by Copyright and the information contained
5* herein is confidential. The software may not be copied and the information
6* contained herein may not be used or disclosed except with the written
7* permission of MediaTek Inc. (C) 2008
8*
9* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
10* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
11* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
12* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
13* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
14* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
15* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
16* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
17* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
18* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
19* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
20* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
21*
22* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
23* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
24* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
25* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
26* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
27*
28* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
29* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
30* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
31* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
32* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
33*
34*****************************************************************************/
35/*******************************************************************************
36 *
37 * Filename:
38 * ---------
39 * custom_flc_config.h
40 *
41 * Project:
42 * --------
43 * MAUI Project
44 *
45 * Description:
46 * ------------
47 * This file is used to define the FLC2 configuration.
48 *
49 * Author:
50 * -------
51 * -------
52 *
53 *==============================================================================
54 * HISTORY
55 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
56 *------------------------------------------------------------------------------
57 * removed!
58 *
59 * removed!
60 * removed!
61 * removed!
62 *
63 * removed!
64 * removed!
65 * removed!
66 *
67 * removed!
68 * removed!
69 * removed!
70 *
71 * removed!
72 * removed!
73 * removed!
74 *
75 * removed!
76 * removed!
77 * removed!
78 *
79 * removed!
80 * removed!
81 * removed!
82 *
83 * removed!
84 * removed!
85 * removed!
86 *
87 * removed!
88 * removed!
89 * removed!
90 *
91 * removed!
92 * removed!
93 * removed!
94 *
95 * removed!
96 * removed!
97 * removed!
98 *
99 * removed!
100 * removed!
101 * removed!
102 *
103 * removed!
104 * removed!
105 * removed!
106 *
107 * removed!
108 * removed!
109 * removed!
110 *
111 * removed!
112 * removed!
113 * removed!
114 *
115 * removed!
116 * removed!
117 * removed!
118 *
119 * removed!
120 * removed!
121 * removed!
122 *
123 * removed!
124 * removed!
125 * removed!
126 *
127 * removed!
128 * removed!
129 * removed!
130 *
131 * removed!
132 * removed!
133 * removed!
134 *
135 * removed!
136 * removed!
137 * removed!
138 *
139 *------------------------------------------------------------------------------
140 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
141 *==============================================================================
142 *******************************************************************************/
143
144#ifndef _CUSTOM_FLC_CONFIG_H
145#define _CUSTOM_FLC_CONFIG_H
146
147#include "kal_general_types.h"
148
149/*************************************************************************
150 * MM BLOCK 11 (ADM)
151 *************************************************************************/
152/* ADM, BLOCK SIZE, 64, 384, 640, 1636 */
153/* For SPDU TPDU (TCP/IP, socket)*/
154
155/*================= Guideline for SPDU_UL and SPDU_DL configuration =============
156
1571. Each Socket has corresponding pool, and each pool has a dedicated buffer
158 with size FLC2_SPDU_UL_SIZE_EM.
1592. There is a share pool for all socket pools.
160 Please define the growth pool size with FLC2_SPDU_UL_GROW_POOL_SIZE.
1613. Please config FLC2_SPDU_DL_POOL_SIZE for downlink socket pool size.
162 ( Receive Window Size.)
163
164NOTE: Do NOT Change Socket number by yourself. It needs update protocol library.
165========================================================================== */
166
167/* SSPDU */
168#define FLC2_SPDU_UL_SIZE_EM (1664)
169
170#ifdef __TCPIP__
171 /* TCPIP is support. */
172
173/* SPDU_UL configuration */
174#define FLC2_SPDU_UL_SIZE FLC2_SPDU_UL_SIZE_EM
175
176#if defined(__WIFI_SUPPORT__) || defined(__HSUPA_SUPPORT__)
177
178#define FLC2_SPDU_UL_GROW_POOL_SIZE_PLUS 30
179
180#if defined(__HOTSPOT_SUPPORT__)
181#define FLC2_SPDU_UL_GROW_POOL_SIZE ((18+FLC2_SPDU_UL_GROW_POOL_SIZE_PLUS) *FLC2_SPDU_UL_SIZE)
182#else // #if defined(__HOTSPOT_SUPPORT__)
183#define FLC2_SPDU_UL_GROW_POOL_SIZE ((14+FLC2_SPDU_UL_GROW_POOL_SIZE_PLUS) *FLC2_SPDU_UL_SIZE)
184#endif // #if defined(__HOTSPOT_SUPPORT__)
185
186#elif defined(__EGPRS_MODE__)
187#define FLC2_SPDU_UL_GROW_POOL_SIZE (13 *FLC2_SPDU_UL_SIZE)
188#else /* __EGPRS_MODE__ */
189#define FLC2_SPDU_UL_GROW_POOL_SIZE (5 *FLC2_SPDU_UL_SIZE)
190#endif /* __EGPRS_MODE__ */
191
192
193#if defined(__UMTS_RAT__)
194
195#ifdef __HOTSPOT_SUPPORT_PERFORMANCE_BENCHMARK__
196#define FLC2_SPDU_DL_POOL_SIZE (120 * 1660)
197#else
198#define FLC2_SPDU_DL_POOL_SIZE (51 * 1660)
199#endif
200
201#elif defined(__EGPRS_MODE__)|| defined(__WIFI_SUPPORT__)
202#ifdef WISDOM_MMI
203#define FLC2_SPDU_DL_POOL_SIZE (120 * 1660)
204#else /* !WISDOM_MMI */
205#define FLC2_SPDU_DL_POOL_SIZE (34 * 1660)
206#endif /* !WISDOM_MMI */
207#else /* __EGPRS_MODE__ */
208#define FLC2_SPDU_DL_POOL_SIZE (16 * 1660)
209#endif /* __EGPRS_MODE__ */
210
211#else /* ============= __TCPIP__ =================== */
212 /* TCPIP is NOT support */
213
214#define FLC2_SPDU_UL_SIZE (0)
215
216#define FLC2_SPDU_UL_GROW_POOL_SIZE (0)
217#define FLC2_SPDU_DL_POOL_SIZE (0)
218
219#endif /* ============= __TCPIP__ =================== */
220
221
222#if defined(__HOTSPOT_SUPPORT__)
223#define FLC2_HS_POOL_SIZE (FLC2_SPDU_UL_SIZE_EM)
224#define FLC2_HS_POOL_MAX_GROW_SIZE (120 * FLC2_SPDU_UL_SIZE_EM)
225#define FLC2_HS_GROW_STEP_SIZE (3 * FLC2_SPDU_UL_SIZE_EM)
226#else
227#define FLC2_HS_POOL_SIZE (0)
228#define FLC2_HS_POOL_MAX_GROW_SIZE (0)
229#define FLC2_HS_GROW_STEP_SIZE (0)
230#endif
231
232
233
234/*========================================================================
235 * CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !!
236 *
237 * Please DO NOT modify below setting.
238 *
239 * CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !! CAUTION !!
240 *======================================================================= */
241
242
243
244
245#ifdef __TCPIP__
246 /* TCPIP is support. */
247
248#if (defined(__VOIP__) || defined(STREAM_SUPPORT)) || defined(FLC2_25_SOCKET_SUPPORT)
249#define FLC2_SPDU_UL_POOL_NUMBER (25) /* socket number, 1 block per socket */
250#elif (defined(WAP_SUPPORT) && defined(__IMPS__))
251#define FLC2_SPDU_UL_POOL_NUMBER (19) /* socket number, 1 block per socket */
252#else /* __VOIP__ */
253#define FLC2_SPDU_UL_POOL_NUMBER (14) /* socket number, 1 block per socket */
254#endif /* __VOIP__ */
255
256#else /* __TCPIP__ */
257
258#define FLC2_SPDU_UL_POOL_NUMBER (0)
259#endif /* __TCPIP__ */
260
261#define FLC2_SPDU_UL_MAX_GROW_SIZE FLC2_SPDU_UL_GROW_POOL_SIZE
262
263#define FLC2_SPDU_UL_POOL_SIZE (FLC2_SPDU_UL_SIZE_EM* FLC2_SPDU_UL_POOL_NUMBER)
264
265
266/* TPDU */
267#ifdef __TCPIP__
268
269#if defined(__WIFI_SUPPORT__) || defined(__HSUPA_SUPPORT__)
270
271#define FLC2_TPDU_POOL_SIZE_PLUS 22
272
273#define FLC2_TPDU_POOL_SIZE ((8+FLC2_TPDU_POOL_SIZE_PLUS)*1668)
274#else /* __WIFI_SUPPORT__ */
275#define FLC2_TPDU_POOL_SIZE ((4)*1668)
276#endif /* __WIFI_SUPPORT__ */
277
278#else /* __TCPIP__ */
279#define FLC2_TPDU_POOL_SIZE (0)
280#endif /* __TCPIP__ */
281
282
283
284/* The value shall synchronize with FLC2_MEM_ADM_CTRL_HEADER_LEN defined in flc2_mem_mngr_config.h */
285//#define FLC2_MEM_ADM_CTRL_HEADER_LEN (((sizeof(flc2_mb_adm_ctrl_header_struct)+3)/4)*4)
286#define FLC2_CUS_MEM_ADM_CTRL_HEADER_LEN (20)
287
288
289/* MM BLOCK 11 */
290/* ADM, BLOCK SIZE, 64, 384, 640, 1636 */
291/* For SPDU TPDU (TCP/IP, socket)*/
292
293#ifndef FLC2_MAX
294#define FLC2_MAX(FLC_A, FLC_B) (((FLC_A) > (FLC_B)) ? (FLC_A):(FLC_B))
295#endif
296
297#define FLC2_MM_BLOCK_11_SIZE ( FLC2_SPDU_UL_POOL_SIZE + \
298 FLC2_HS_POOL_SIZE + \
299 FLC2_MAX(FLC2_SPDU_UL_MAX_GROW_SIZE, FLC2_HS_POOL_MAX_GROW_SIZE) + \
300 FLC2_TPDU_POOL_SIZE + \
301 FLC2_CUS_MEM_ADM_CTRL_HEADER_LEN)
302
303#define FLC2_MM_BLOCK_12_SIZE ( FLC2_SPDU_DL_POOL_SIZE + \
304 FLC2_CUS_MEM_ADM_CTRL_HEADER_LEN)
305
306/* End of MM BLOCK 11 */
307
308
309
310
311typedef enum {
312 GPRS_FLC_UL, /* Uplink */
313 GPRS_FLC_DL /* Downlink */
314} gprs_flc_dir_enum;
315
316
317/* Global variable declaration. */
318extern kal_uint32 flc2_mm_block_11_g[];
319extern kal_uint32 flc2_mm_block_12_g[];
320
321
322extern kal_uint32 flc_get_profile_info_spdu_ul(kal_uint32 *total_size_em_mode, kal_uint32 *max_grow_size);
323extern kal_uint32 flc_get_profile_info_spdu_dl(kal_uint32 *max_grow_size);
324extern kal_uint32 flc_get_profile_info_tpdu(kal_uint32 *max_grow_size);
325
326extern kal_uint32* flc_get_mb_info_index_11(kal_uint32 *total_size, kal_uint32 *max_grow_size);
327extern kal_uint32* flc_get_mb_info_index_12(kal_uint32 *total_size, kal_uint32 *max_grow_size);
328
329
330#endif /* _CUSTOM_FLC_CONFIG_H */
331