mcu/interface/protocol/as_c2k/1xrtt/custom.h

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2016
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS (""MEDIATEK SOFTWARE"")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN ""AS-IS"" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/
/*************************************************************
*
* This Software is the property of VIA Telecom, Inc. and may only be used pursuant to a license from VIA Telecom, Inc.  
* 
* Any unauthorized use inconsistent with the terms of such license is strictly prohibited.
* 
* Copyright (c) 1999-2010 VIA Telecom, Inc.  All rights reserved.
*
*************************************************************/
/****************************************************************************
 *
 * Module:    custom.h
 *
 * Purpose:   Customer specified compile switches
 *
 ****************************************************************************
 *
 *
 *                          PVCS Header Information
 *
 *  $Revision: 1.2 $
 *    $Author: fpeng $
 *
 *       $Log: custom.h $
 *
 *       07 06 2017 sue.zhong
 *       [MOLY00259241] [6293][C2K]Replace with KAL data type
 *       Correct copyright file header
 *       Revision 1.2  2004/03/25 12:09:24  fpeng
 *       Updated from 6.0 CP 2.5.0
 *       Revision 1.1  2003/05/12 15:38:35  fpeng
 *       Initial revision
 *       Revision 1.2  2002/06/06 13:11:30  chinh
 *       Changed and Added Copyright
 *       Revision 1.1  2001/01/17 10:58:21  plabarbe
 *       Initial revision
 *       Revision 1.3  2000/12/05 17:44:50  byang
 *       Idle mode - IS2000A Addendum modifications.
 *       Revision 1.2  2000/11/13 14:25:25  byang
 *       IS-2000A Idle Mode and LAC intergration - Initial Release.
 *       Revision 1.1  2000/10/24 21:11:07Z  fpeng
 *       Initial revision
 *       Revision 1.7  2000/09/23 02:44:54Z  rnookala
 *       Commented out duplicate #defines (constants)
 *       Revision 1.6  2000/09/08 23:56:41Z  RSATTARI
 *       Added defines for the fields of the capability information record response.
 *       Revision 1.5  2000/08/31 23:41:48Z  bcolford
 *       Replaced AMPS_SUPPORTED with SYS_OPTION_AMPS.
 *       Revision 1.4  2000/08/23 22:05:58Z  RSATTARI
 *       Isotel release 2.8 plus LSI applicable IS-95B changes.
 *       Revision 1.35  2000/02/22 17:09:55  scotvold
 *       Changed CP_MAX_DATA_BURST_CHAR from 249 to 246,
 *       to take into account MSG_LENGTH and CRC fields.
 *
 *       Revision 1.34  2000/02/18 23:35:01  gfrye
 *       Added more configurable parameters for PRL list feature.
 *       Added configurable parameters for Analog SMS feature.
 *
 *       Revision 1.33  2000/02/05 00:02:26  gfrye
 *       Added parameter for number of broadcast messages that can be
 *       screened for duplicates.
 *
 *       Revision 1.32  2000/01/22 01:48:31  scotvold
 *       Moved channels to css_api.h
 *
 *       Revision 1.31  2000/01/22 00:29:29  gfrye
 *       Added defines to support custom system selection.
 *
 *       Revision 1.30  2000/01/17 22:30:45  scotvold
 *       TC Backward Compatibility changes.
 *
 *       Revision 1.29  1999/10/21 16:58:15  dfischer
 *       Changed c++ stype comment to ansi C
 *
 *       Revision 1.28  1999/10/21 15:48:54  gfrye
 *       Added compile switch for Korean !S-95A data extensions.
 *
 *       Revision 1.3  2000/03/09 17:03:13Z  bcolford
 *       Set the OP_MODE2 bit in the ENG_CUSTOM_OP_MODE
 *       flag if AMPS is supported.
 *       Revision 1.2.1.3  2000/03/09 15:33:16Z  bcolford
 *       Added bit definition for AMPS OP_MODE2.
 *       Revision 1.2  2000/03/01 18:06:06Z  rsattari
 *       Isotel release 2.3 updates.
 *       Revision 1.1.1.1.1.1  1999/11/30 23:12:08Z  rsattari
 *       Duplicate revision
 *       Revision 1.1.1.1  1999/11/30 23:12:08Z  rsattari
 *       Duplicate revision
 *       Revision 1.29  1999/09/29 22:25:31  rsattari
 *       BB changes for new T_ADD/T_DROP.
 *       Revision 1.28  1999/09/20 19:08:47  rsattari
 *       sync with patches.
 *       Revision 1.20.1.2.1.15  1999/09/13 20:11:03  banister
 *       Changed dynamic T_ADD and T_DROP thresh to have 0.5dB resolution and
 *       be independently configurable.
 *       Revision 1.20.1.2.1.14  1999/09/13 19:44:48  banister
 *       Reduced the adaptive T_ADD and T_DROP thresholds.
 *       Revision 1.20.1.2.1.13  1999/09/11 04:08:09  banister
 *       Added an adaptive T_ADD and T_DROP threshold to accommodate 
 *       situations where all pilots are below T_ADD.
 *       Revision 1.20.1.2.1.12  1999/09/09 21:20:56  rsattari
 *       2.10 patch 6.
 *       Revision 1.5  1999/09/04 13:44:00  cdma
 *
 *       Revision 1.27  1999/09/02 20:33:49  gfrye
 *       Added T53_PLUS_OR_95B compile switch for code common to 95B and
 *       to T53 rev 3+.
 *
 *       Revision 1.26  1999/08/31 22:59:49  gfrye
 *       Added new registration delay after failure timer.
 *
 *       Revision 1.25  1999/08/27 19:59:29  gfrye
 *       Added OOSA configuration parameters to support the change from 3
 *       OOSA phases to 4.
 *
 *       Revision 1.24  1999/08/18 23:48:07  gfrye
 *       1. Replaced ENG_MAX_BAD_PAGE_CRC with ENG_MAX_BAD_PAGE_FRAME as the new page
 *          channel monitoring scheme is based on a time between valid CRC's
 *          rather than a number of bad CRC's.
 *       2. Increased the history size from 3 to 7.
 *
 *       Revision 1.23  1999/08/13 21:30:20  gfrye
 *       Added NOISE_THRESHOLD as follows.  No neighbor pilot will be considered a valid target
 *       for handoff if its  signal strength is below the NOISE_THRESHOLD specifed in custom.h
 *
 *       Revision 1.22  1999/08/06 22:23:48  gfrye
 *       Removed comment that is no longer valid.
 *
 *       Revision 1.21  1999/08/05 01:11:23  scotvold
 *       Moved CP_BCAST_ADDRESS_MAX_SIZE to custom.h.
 *
 *       Revision 1.20  1999/07/28 20:02:00  gfrye
 *       Added MAX_HISTORY_RECS to define the number of previously visited base
 *       stations for which to store overhead information.
 *       Replace old Idle Handoff Parameters with the parameters for the new more
 *       general algorithm.
 *
 *       Revision 1.19  1999/07/22 23:23:04  scotvold
 *       Added compile option for Auto Answer.
 *
 *       Revision 1.18  1999/07/07 21:22:38  scotvold
 *       Separation of HT_MAX and T_MAX for idle handoff.
 *
 *       Revision 1.17  1999/07/01 16:27:17  dfischer
 *       Added ..._CRC
 *
 *       Revision 1.16  1999/06/23 22:48:56  gfrye
 *       Added compile option for ACCESS_ENTRY_HANDOFF_ALLOWED.
 *       Added CP_ACCESS_ENTRY_HO_WEAK_PILOT_STRENGTH - threshold for trying a Access entry handoff.
 *
 *       Revision 1.14  1999/06/09 22:01:45  dfischer
 *       Moved ACQ_SIZE and MSGQ_SIZE from tc_mtx.c to custom.th
 *
 *       Revision 1.13  1999/06/04 23:27:26  scotvold
 *       New Message Transmitter.
 *
 *       Revision 1.12  1999/05/19 16:25:19  mhayduk
 *       Added define for T53 MSD support.
 *
 *       Revision 1.11  1999/04/16 20:16:10  scotvold
 *       Added checking of IHO and OOSA parameters.
 *
 *       Revision 1.10  1999/04/16 01:25:19  scotvold
 *       Increased CP_MAX_BURST_DTMF_DIGITS to 255.
 *
 *       Revision 1.9  1999/04/13 19:17:27  scotvold
 *       New Idle Handoff Algorithm.
 *
 *       Revision 1.7  1999/03/18 19:55:25  mhayduk
 *       Added support for Searching Out of Service Area operation.
 *
 *       Revision 1.6  1999/03/03 19:35:28  mhayduk
 *       Added new customer define to allow setting of default service
 *       option.
 *
 *       Revision 1.5  1998/11/02 22:00:39  scotvold
 *       Moved defines to custom.h
 *
 *       Revision 1.4  1998/10/21 00:04:07  mhayduk
 *       Added T53 support.
 *
 *       Revision 1.3  1998/06/12 14:50:38  scotvold
 *       Updated for Release 0.07.
 *
 *       Revision 1.2  1998/06/08 21:53:21  scotvold
 *       Updated for Release 0.06.
 *
 * Revision 1.1  1998/05/01  18:13:54  scotvold
 * Initial revision
 *
 * Revision 1.3  1998/03/30  23:26:03  mhayduk
 * Release 0.03.
 *
 * Revision 1.1  1997/11/06  17:49:24  mhayduk
 * Initial revision
 *
 *
 *
 ****************************************************************************
 ****************************************************************************/
 

#ifndef _CUSTOM_H_ 

  #define _CUSTOM_H_ 1

#include "pswcustom.h"

#endif  /* _CUSTOM_H_ */