Gitiles
Code Review Sign In
192.168.1.100 / T800_MD / 0b80c7188a6089ae59f523c5d460adad05960e1d / . / mcu / interface / protocol / general / lpp_lppe_def.h
blob: 24480b43892fc36d76465ac58f8840522baaff67 [file] [log] [blame]
rjw6c1fd8f2022-11-30 14:33:01 +0800[diff] [blame]1/******************************************************************************
2* Copyright Statement:
3* --------------------
4* This software is protected by Copyright and the information contained
5* herein is confidential. The software may not be copied and the information
6* contained herein may not be used or disclosed except with the written
7* permission of MediaTek Inc. (C) 2016
8*
9* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
10* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
11* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
12* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
13* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
14* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
15* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
16* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
17* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
18* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
19* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
20* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
21*
22* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
23* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
24* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
25* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
26* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
27*
28* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
29* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
30* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
31* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
32* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
33*
34*******************************************************************************/
35
36/******************************************************************************
37 * Filename:
38 * --------------------------------------------------------
39 * lpp_lppe_def.h
40 *
41 * Project:
42 * --------------------------------------------------------
43 *
44 *
45 * Description:
46 * --------------------------------------------------------
47 * LPP/LPP Extension Interface - Macro Definition
48 *
49 * Author:
50 * --------------------------------------------------------
51 * -------
52 *
53 * --------------------------------------------------------
54 * $Log$
55 *
56 * 09 07 2018 jie-yu.wang
57 * [MOLY00350925] [LPPe] AT&T v18.2 requirement for LPPe MAC Address
58 * [VMOLY][LPPe] AT&T MAC Address report.
59 *
60 * 03 15 2018 jie-yu.wang
61 * [MOLY00311925] Code sync from R3.
62 *
63 * 10 20 2017 roland.li
64 * [MOLY00284361] [LPPe][VzW] LPPe early fix feature
65 *
66 * .
67 *
68 * 09 06 2016 doug.shih
69 * [LPPe] interface design
70 * .
71 *
72 * 08 24 2016 doug.shih
73 * [LPPe] interface design
74 * .
75 *
76 *
77 *****************************************************************************/
78
79#ifndef _LPP_LPPE_DEF_H
80#define _LPP_LPPE_DEF_H
81
82#include "kal_public_api.h"
83#include "kal_public_defs.h"
84#include "kal_general_types.h"
85
86/**
87 * Nine LPPe sessions in parallel should be the worst case:
88 * AD/LI procedure for HA GNSS, WLAN AP, SENSOR PRESSURE, SRN BT and plus on CAPA proceudre
89 */
90#define LPP_EXT_MAX_SESSION_COUNT 9
91#define LPP_EXT_SESSION_MAX_POS_METHOD_COUNT 4 /* HA GNSS, WLAN AP, SENSOR PRESSURE, SRN BT */
92
93#define LPP_EXT_RESPONSE_TIMER_MAX_SUPPORT_NUM 3 /* for maximum two parallel transactions which need response time control (WLAN, BT, SENSOR), NETWORK has another timer ID */
94
95
96#define LPP_EXT_MAX_DL_EPDU_BUFFER_COUNT 1 /* for multiple segmented downlink AD EPDU received in a short time */
97#define LPP_EXT_MAX_UL_EPDU_BUFFER_COUNT 1 /* for multiple segmented uplink EPDU sent in a short time */
98
99/* LPPe version and compatible level */
100#define LPP_EXT_MAX_SUPPORT_VER_MAJOR_VER 1 /* fill capability when init, and check when receive message */
101#define LPP_EXT_MAX_SUPPORT_VER_MINOR_VER 0 /* fill capability when init, and check when receive message */
102#define LPP_EXT_SUPPORT_COMPATIBILITY_LEVEL 0 /* fill capability when init, and check when receive message */
103
104/* location soruce method bitmask, 8 bit presentation */
105#define LOC_SRC_METHOD_AGNSS 0x01
106#define LOC_SRC_METHOD_WLAN_AP 0x02
107#define LOC_SRC_METHOD_SRN 0x04
108#define LOC_SRC_METHOD_SENSOR 0x08
109
110#define WLAN_MAX_DATA_SET_ELEMENT 8 /* maxWLANDataSets */
111#define WLAN_AP_MAX_DATA_ELEMENT 128 /* maxWLANAPs */
112#define WLAN_AP_MAX_TYPE_DATA_ELEMENT 5 /* maxWLANTypes */
113#define WLAN_FEMTO_MAX_AREA_ELEMENT 16
114
115/* SRN assistance data element */
116#define SRN_MAX_SRN_GROUP_ELEMENT 64 /* one SRN group might consist of all the SRNs located in one floor of a building. Up to 64 groups can be provided in the same IE */
117#define SRN_MAX_SRN_INFO_ELEMENT 1024
118#define SRN_MAX_GROUP_UPDATE_RSP_ELEMENT 8
119#define SRN_MAX_TARGET_DEVICE_ERR_ELEMENT 16
120#define SRN_MAX_CATEGORY_ELEMENT 16
121#define SRN_MAX_GROUP_ELEMENT 256
122#define SRN_MAX_GROUP_UPDATE_REQ_ELEMENT 64
123#define SRN_MAX_ANTENNA_REQ_ELEMENT 8
124
125/* SRN location request info category, for save memory and buffer usage set 16->2 */
126#define SRN_MAX_LOC_REQ_INFO_CATEGORY_ELEMENT 2
127
128/* IP address list */
129#define LOC_IP_ADDR_MAX_ELEMENT 5
130
131/* WLAN location info list */
132#define WLAN_AP_MAX_LOC_INFO_LIST_ELEMENT 64
133#define WLAN_AP_MAX_SSID_OCTET 32
134
135/* Sensor motion state list */
136#define SENSOR_MAX_MOTION_STATE_ELEMENT 8
137#define SENSOR_MAX_CALIBRATION_POINT 10
138
139/* SRN measurement list */
140#define SRN_MAX_MEASUREMENT_ELEMENT 64
141#define SRN_MAX_SRN_MEASUREMENT_ELEMENT 64
142
143
144#define WLAN_AP_LOC_DATA_LCI_LATITUDE_RESOLUTION_BITMASK 0x3F /* 6 bits, IE use 1 byte */
145#define WLAN_AP_LOC_DATA_LCI_LATITUDE_BITMASK 0x00000003FFFFFFFF /* 34 bits, IE use 8 byte */
146#define WLAN_AP_LOC_DATA_LCI_LONGITUDE_RESOLUTION_BITMASK 0x3F /* 6 bits, IE use 1 byte */
147#define WLAN_AP_LOC_DATA_LCI_LONGITUDE_BITMASK 0x00000003FFFFFFFF /* 34 bits, IE use 8 byte */
148#define WLAN_AP_LOC_DATA_LCI_ALTITUDE_TYPE_BITMASK 0x0F /* 4 bits, IE use 1 byte */
149#define WLAN_AP_LOC_DATA_LCI_ALTITUDE_RESOLUTION_BITMASK 0x3F /* 6 bits, IE use 1 byte */
150#define WLAN_AP_LOC_DATA_LCI_ALTITUDE_BITMASK 0x3FFFFFFF /* 30 bits, IE use 4 byte */
151#define WLAN_AP_LOC_DATA_LCI_DATUM_BITMASK 0xFF /* 8 bits, IE use 1 byte */
152
153
154#define WLAP_AP_ID_MAC_ADDR_BITMASK 0xFFFFFFFFFFFF /* WLAN AP MAC Address contains 48 bits */
155#define BT_ID_MAC_ADDR_BITMASK 0xFFFFFFFFFFFF /* the MAC address of the SRN for BT and BT LE as per [IEEE 802.15.1] */
156
157
158/* for wlan_ap_location_server_err_cause_struct = not all AD available, 16 bit presentation */
159#define WLAN_AP_LOC_SRV_ERR_AP_MANDATORY_DATA_UNAVAILABLE 0x0800
160#define WLAN_AP_LOC_SRV_ERR_AP_LOCATIONS_UNAVAILABLE 0x0400
161#define WLAN_AP_LOC_SRV_ERR_AP_LOCATION_RELIABILITY_UNAVAILABLE 0x0200
162#define WLAN_AP_LOC_SRV_ERR_AP_TRANSMIT_POWER_UNAVAILABLE 0x0100
163#define WLAN_AP_LOC_SRV_ERR_AP_ANTENNA_GAIN_UNAVAILABLE 0x0080
164#define WLAN_AP_LOC_SRV_ERR_AP_COVERAGE_AREA_UNAVAILABLE 0x0040
165#define WLAN_AP_LOC_SRV_ERR_NON_SERVING_AD_UNAVAILABLE 0x0020
166#define WLAN_AP_LOC_SRV_ERR_AP_TP_NOT_AVAILABLE 0x0010
167#define WLAN_AP_LOC_SRV_ERR_AP_AG_NOT_AVAILABLE 0x0008
168#define WLAN_AP_LOC_SRV_ERR_UE_SN_NOT_AVAILABLE 0x0004
169#define WLAN_AP_LOC_SRV_ERR_UE_RSSI_NOT_AVAILABLE 0x0002
170#define WLAN_AP_LOC_SRV_ERR_OC_NOT_AVAILABLE 0x0001
171
172
173/* for wlan_ap_target_device_err_cause_struct = not all requested measurement possible, 32 bit presentation */
174#define WLAN_AP_TGT_DEV_ERR_AP_SSID_NOT_AVAILABLE 0x00010000
175#define WLAN_AP_TGT_DEV_ERR_AP_SN_MEASUREMENT_NOT_POSSIBLE 0x00008000
176#define WLAN_AP_TGT_DEV_ERR_AP_DEV_TYPE_NOT_AVAILABLE 0x00004000
177#define WLAN_AP_TGT_DEV_ERR_AP_PHY_TYPE_NOT_AVAILABLE 0x00002000
178#define WLAN_AP_TGT_DEV_ERR_AP_RSSI_MEASUREMENT_NOT_POSSIBLE 0x00001000
179#define WLAN_AP_TGT_DEV_ERR_AP_CHAN_FREQ_NOT_AVAILABLE 0x00000800
180#define WLAN_AP_TGT_DEV_ERR_AP_RTD_MEASUREMENT_NOT_POSSIBLE 0x00000400
181#define WLAN_AP_TGT_DEV_ERR_UE_TP_NOT_AVAILABLE 0x00000200
182#define WLAN_AP_TGT_DEV_ERR_UE_AG_NOT_AVAILABLE 0x00000100
183#define WLAN_AP_TGT_DEV_ERR_AP_REC_LOC_NOT_AVAILABLE 0x00000080
184#define WLAN_AP_TGT_DEV_ERR_NON_SERVING_MEASUREMENT_NOT_AVAILABLE 0x00000040
185#define WLAN_AP_TGT_DEV_ERR_HISTORIC_MEASUREMENT_NOT_AVAILABLE 0x00000020
186#define WLAN_AP_TGT_DEV_ERR_AP_TP_NOT_AVAILABLE 0x00000010
187#define WLAN_AP_TGT_DEV_ERR_AP_AG_NOT_AVAILABLE 0x00000008
188#define WLAN_AP_TGT_DEV_ERR_UE_SN_NOT_AVAILABLE 0x00000004
189#define WLAN_AP_TGT_DEV_ERR_UE_RSSI_NOT_AVAILABLE 0x00000002
190#define WLAN_AP_TGT_DEV_ERR_OC_NOT_AVAILABLE 0x00000001
191
192
193/* for srn_target_device_error_element_struct = not all requested measurement possible, 8 bit presentation */
194#define SRN_TGT_DEV_ERR_RSSI_NOT_AVAILABLE 0x08
195#define SRN_TGT_DEV_ERR_RTD_NOT_AVAILABLE 0x04
196#define SRN_TGT_DEV_ERR_MULTIPLE_SETS_NOT_AVAILABLE 0x02
197#define SRN_TGT_DEV_ERR_HISTORIC_MEASUREMENTS_NOT_AVAILABLE 0x01
198
199
200/* WLAN AP AD request bitmask, 16 bit presentation */
201#define WLAN_AP_REQ_AD_BIT_AP_LIST (1 << 0) /* 0x0001 */
202#define WLAN_AP_REQ_AD_BIT_AP_LOCATION (1 << 1) /* 0x0002 */
203#define WLAN_AP_REQ_AD_BIT_LOCATION_RELIABILITY (1 << 2) /* 0x0004 */
204#define WLAN_AP_REQ_AD_BIT_TRANSMIT_POWER (1 << 3) /* 0x0008 */
205#define WLAN_AP_REQ_AD_BIT_ANTENNA_GAIN (1 << 4) /* 0x0010 */
206#define WLAN_AP_REQ_AD_BIT_COVERAGE_AREA (1 << 5) /* 0x0020 */
207#define WLAN_AP_REQ_AD_BIT_NON_SERVING (1 << 6) /* 0x0040 */
208
209
210/* WLAN AP AD support bitmask, 16 bit presentation */
211#define WLAN_AP_SUPP_AD_BIT_AP_LIST (1 << 0) /* 0x0001 */
212#define WLAN_AP_SUPP_AD_BIT_AP_LOCATION (1 << 1) /* 0x0002 */
213#define WLAN_AP_SUPP_AD_BIT_LOCATION_RELIABILITY (1 << 2) /* 0x0004 */
214#define WLAN_AP_SUPP_AD_BIT_TRANSMIT_POWER (1 << 3) /* 0x0008 */
215#define WLAN_AP_SUPP_AD_BIT_ANTENNA_GAIN (1 << 4) /* 0x0010 */
216#define WLAN_AP_SUPP_AD_BIT_COVERAGE_AREA (1 << 5) /* 0x0020 */
217#define WLAN_AP_SUPP_AD_BIT_NON_SERVING (1 << 6) /* 0x0040 */
218
219
220/* WLAN AP type bitmask, 16 bit presentation */
221#define WLAN_AP_TYPE_LIST_BIT_IEEE802_11A (1 << 0) /* 0x0001 */
222#define WLAN_AP_TYPE_LIST_BIT_IEEE802_11B (1 << 1) /* 0x0002 */
223#define WLAN_AP_TYPE_LIST_BIT_IEEE802_11G (1 << 2) /* 0x0004 */
224#define WLAN_AP_TYPE_LIST_BIT_IEEE802_11N (1 << 3) /* 0x0008 */
225#define WLAN_AP_TYPE_LIST_BIT_IEEE802_11AC (1 << 4) /* 0x0010 */
226#define WLAN_AP_TYPE_LIST_BIT_IEEE802_11AD (1 << 5) /* 0x0020 */
227
228/* WLAN AP requested measurement type bitmask, 32 bit presentation */
229#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_SSID (1 << 15) /* 0x00008000 */ /* SSID of the WLAN */
230#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_SN (1 << 14) /* 0x00004000 */ /* AP S/N received at the target */
231#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_DEV_TYPE (1 << 13) /* 0x00002000 */ /* AP Device type */
232#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_PHY_TYPE (1 << 12) /* 0x00001000 */ /* AP PHY type */
233#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_RSSI (1 << 11) /* 0x00000800 */ /* AP signal strength at the target (both LPP and LPPe) */
234#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_CH_FREQ (1 << 10) /* 0x00000400 */ /* AP channel/frequency of Tx/Rx */
235#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_RTD (1 << 9) /* 0x00000200 */ /* Round Trip Delay between target and AP (both LPP and LPPe) */
236#define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_TRANS_PWR (1 << 8) /* 0x00000100 */ /* target transmit power */
237#define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_ANT_GAIN (1 << 7) /* 0x00000080 */ /* target antenna gain */
238#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_RPT_LOC (1 << 6) /* 0x00000040 */ /* AP Location as reported by AP */
239#define WLAN_AP_MEAS_REQ_TYPE_BIT_NON_SERVING (1 << 5) /* 0x00000020 */ /* measurements for a non-serving WLAN AP (in addition to a serving WLAN AP) */
240#define WLAN_AP_MEAS_REQ_TYPE_BIT_HISTORIC_MEAS (1 << 4) /* 0x00000010 */ /* historic WLAN AP measurements */
241#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_TRANS_PWR (1 << 3) /* 0x00000008 */ /* AP transmit power */
242#define WLAN_AP_MEAS_REQ_TYPE_BIT_AP_ANT_GAIN (1 << 2) /* 0x00000004 */ /* AP antenna gain */
243#define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_SNR (1 << 1) /* 0x00000002 */ /* UE signal to noise ratio received at the AP */
244#define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_RSSI (1 << 0) /* 0x00000001 */ /* target signal strength at the AP */
245#define WLAN_AP_MEAS_REQ_TYPE_BIT_OP_CLASS (1 << 19) /* 0x00080000 */ /* operating class */
246#define WLAN_AP_MEAS_REQ_TYPE_BIT_UE_MAC_ADDRESS (1 << 18) /* 0x00040000 */ /* ue mac address */
247
248/* WLAN AP measurmenet capability type bitmask, 32 bit presentation */
249#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_SSID (1 << 15) /* 0x00008000 */ /* SSID of the WLAN */
250#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_SN (1 << 14) /* 0x00004000 */ /* AP S/N received at the target */
251#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_DEV_TYPE (1 << 13) /* 0x00002000 */ /* AP Device type */
252#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_PHY_TYPE (1 << 12) /* 0x00001000 */ /* AP PHY type */
253#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_RSSI (1 << 11) /* 0x00000800 */ /* AP signal strength at the target (both LPP and LPPe) */
254#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_CH_FREQ (1 << 10) /* 0x00000400 */ /* AP channel/frequency of Tx/Rx */
255#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_RTD (1 << 9) /* 0x00000200 */ /* Round Trip Delay between target and AP (both LPP and LPPe) */
256#define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_TRANS_PWR (1 << 8) /* 0x00000100 */ /* target transmit power */
257#define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_ANT_GAIN (1 << 7) /* 0x00000080 */ /* target antenna gain */
258#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_RPT_LOC (1 << 6) /* 0x00000040 */ /* AP Location as reported by AP */
259#define WLAN_AP_MEAS_CAPA_TYPE_BIT_NON_SERVING (1 << 5) /* 0x00000020 */ /* measurements for a non-serving WLAN AP (in addition to a serving WLAN AP) */
260#define WLAN_AP_MEAS_CAPA_TYPE_BIT_HISTORIC_MEAS (1 << 4) /* 0x00000010 */ /* historic WLAN AP measurements */
261#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_TRANS_PWR (1 << 3) /* 0x00000008 */ /* AP transmit power */
262#define WLAN_AP_MEAS_CAPA_TYPE_BIT_AP_ANT_GAIN (1 << 2) /* 0x00000004 */ /* AP antenna gain */
263#define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_SNR (1 << 1) /* 0x00000002 */ /* UE signal to noise ratio received at the AP */
264#define WLAN_AP_MEAS_CAPA_TYPE_BIT_UE_RSSI (1 << 0) /* 0x00000001 */ /* target signal strength at the AP */
265#define WLAN_AP_MEAS_CAPA_TYPE_BIT_OP_CLASS (1 << 16) /* 0x00010000 */ /* operating class */
266
267/* WLAN AP additional requested measurement type bitmask, 8 bit presentation */
268#define WLAN_AP_ADD_MEAS_REQ_TYPE_BIT_OP_CLASS (1 << 0) /* 0x0001 */
269
270/* WLAN MAC Address size */
271#define WLAN_MAC_ADDRESS_SIZE 6
272
273/* BT MAC Address size */
274#define BT_MAC_ADDRESS_SIZE 6
275
276/* SRN measurement type bitmask, 8 bit presentation */
277#define SRN_MEAS_TYPE_BIT_RSSI (1 << 0) /* 0x01 */
278#define SRN_MEAS_TYPE_BIT_RTD (1 << 1) /* 0x02 */
279
280
281/* SRN assistance data type bitmask, 8 bit presentation */
282#define SRN_AD_TYPE_BIT_SRN_GROUP (1 << 0) /* 0x01 */
283#define SRN_AD_TYPE_BIT_ANTENNA_PATTERN (1 << 1) /* 0x02 */
284
285
286/* wireless access type (similar to data bearer) bitmask, 8 bit presentation */
287#define WIRELESS_ACCESS_TYPE_GSM (1 << 0) /* 0x01 */
288#define WIRELESS_ACCESS_TYPE_UTRA (1 << 1) /* 0x02 */
289#define WIRELESS_ACCESS_TYPE_LTE (1 << 2) /* 0x04 */
290#define WIRELESS_ACCESS_TYPE_WIFI (1 << 3) /* 0x08 */
291#define WIRELESS_ACCESS_TYPE_OTHER (1 << 4) /* 0x10 */
292
293
294/* WLAN AP location info validity bitmask, 32 bit presentation */
295#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SSID (1 << 0) /* 0x00000001 */
296#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_TO_NOISE (1 << 1) /* 0x00000002 */
297#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_DEVICE_TYPE (1 << 2) /* 0x00000004 */
298#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_PHY_TYPE (1 << 3) /* 0x00000008 */
299#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_STRENGTH (1 << 4) /* 0x00000010 */
300#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_CH_FREQ (1 << 5) /* 0x00000020 */
301#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_ROUND_TRIP_DELAY (1 << 6) /* 0x00000040 */
302#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_TRANSMIT_POWER (1 << 7) /* 0x00000080 */
303#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_ANTENNA_GAIN (1 << 8) /* 0x00000100 */
304#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_REPORTED_LOC (1 << 9) /* 0x00000200 */
305#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_TRANSMIT_POWER (1 << 10) /* 0x00000400 */
306#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_ANTENNA_GAIN (1 << 11) /* 0x00000800 */
307#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_TO_NOISE (1 << 12) /* 0x00001000 */
308#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_STRENGTH (1 << 13) /* 0x00002000 */
309#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_STRENGTH_DELTA (1 << 14) /* 0x00004000 */
310#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_STRENGTH_DELTA (1 << 15) /* 0x00008000 */
311#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_AP_SIGNAL_TO_NOISE_DELTA (1 << 16) /* 0x00010000 */
312#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_UE_SIGNAL_TO_NOISE_DELTA (1 << 17) /* 0x00020000 */
313#define WLAN_AP_LOC_INFO_TYPE_VALID_BIT_OPERATING_CLASS (1 << 18) /* 0x00040000 */
314
315
316/* Sensor motion state bitmask, 16 bit presentation */
317#define SENSOR_SEC_MOTION_STATE_STATIONARY (1 << 0) /* 0x0001 */
318#define SENSOR_SEC_MOTION_STATE_PEDESTRIAN (1 << 1) /* 0x0002 */
319#define SENSOR_SEC_MOTION_STATE_RUNNING (1 << 2) /* 0x0004 */
320#define SENSOR_SEC_MOTION_STATE_CYCLING (1 << 3) /* 0x0008 */
321#define SENSOR_SEC_MOTION_STATE_CAR (1 << 4) /* 0x0010 */
322#define SENSOR_SEC_MOTION_STATE_TRAIN (1 << 5) /* 0x0020 */
323#define SENSOR_SEC_MOTION_STATE_AEROPLANE (1 << 6) /* 0x0040 */
324#define SENSOR_SEC_MOTION_STATE_BOAT (1 << 7) /* 0x0080 */
325#define SENSOR_SEC_MOTION_STATE_FIDGETING (1 << 8) /* 0x0100 */
326
327
328/* IP address type bitmask, 8 bit presentation */
329#define IP_ADDR_TYPE_BIT_IP_V4 (1 << 0) /* 0x01 */
330#define IP_ADDR_TYPE_BIT_IP_V6 (1 << 1) /* 0x02 */
331
332/* To align AP structure*/
333#define MAX_ENUM_VALUE 2147483647
334
335/* LPPe session type bitmask, use one-byte representation */
336#define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_NONE 0x00
337#define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_WLAN 0x01
338#define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_BT 0x02
339#define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_SENSOR 0x04
340#define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_NETWORK 0x08
341#define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_IPADDRESS 0x10
342#define LPPE_SERVICE_SUPPORT_TYPE_BITMASK_MAX 0xff
343
344/* LPPe DBH results source bitmask */
345#define LPPE_LOCATION_SOURCE_BITMASK_AGNSS 0x00000001
346#define LPPE_LOCATION_SOURCE_BITMASK_SENSOR 0x00000002
347#define LPPE_LOCATION_SOURCE_BITMASK_ECIDLTE 0x00000004
348#define LPPE_LOCATION_SOURCE_BITMASK_ECIDGSM 0x00000008
349#define LPPE_LOCATION_SOURCE_BITMASK_ECIDUTRA 0x00000010
350#define LPPE_LOCATION_SOURCE_BITMASK_WLANAP 0x00000020
351#define LPPE_LOCATION_SOURCE_BITMASK_SRN 0x00000040
352#endif /* _LPP_LPPE_DEF_H */