mcu/interface/protocol/as_c2k/1xrtt/identity.h

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2016
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS (""MEDIATEK SOFTWARE"")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN ""AS-IS"" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/
/*************************************************************
*
* This Software is the property of VIA Telecom, Inc. and may only be used pursuant to a license from VIA Telecom, Inc.
*
* Any unauthorized use inconsistent with the terms of such license is strictly prohibited.
*
* Copyright (c) 1999-2010 VIA Telecom, Inc.  All rights reserved.
*
*************************************************************/
/****************************************************************************
 *
 * Filename:   identity.h
 *
 * Purpose:    Define externally available (global) mobile station identity
 *             elements.
 *
 ****************************************************************************
 *
 *                          PVCS Header Information
 *
 *  $Revision: 1.5 $
 *    $Author: hans $
 *
 *       $Log: identity.h $
 *
 *       07 06 2017 sue.zhong
 *       [MOLY00259241] [6293][C2K]Replace with KAL data type
 *       Correct copyright file header
 *
 *       05 17 2017 peijun.zheng
 *       [MOLY00249027] [BIACNO][MT6763][New feature]C2K code release code modification
 *       	
 *       	C2k code release.
 *       Revision 1.5  2005/10/06 17:34:53  hans
 *       Merged the appropriate changes from the CBP4.05 CP SW baseline to address CR6049,CR7031,CR7032,CR7033,CR7034
 *       Revision 1.4  2005/03/18 10:24:52  bcolford
 *       CBP4.05 [4.21] to CBP6.1 [2.9.0] CP Software Merge.
 *       Revision 1.2  2004/08/13 10:03:29  agontar
 *       Removed T53 flag; added support for BC3; cleaned up logs
 *       Revision 1.3  2004/04/06 14:02:10  dstecker
 *       CBP6.1 release 1
 *       Revision 1.2  2004/03/25 12:09:34  fpeng
 *       Updated from 6.0 CP 2.5.0
 *       Revision 1.2  2003/08/28 11:18:15  bcolford
 *       Update for merge.
 *       Revision 1.11  2003/05/21 17:11:22  byang
 *       CR#570: Replace compiler flag with IS2000A with IS2000_REV_0.
 *       Revision 1.10  2002/12/04 14:43:55  hans
 *       CR1648: OP mode setting i retrieved direct from ms cap db.
 *       Revision 1.9  2002/09/30 15:15:26  mshaver
 *       Changes to support the single NAM data structure type
 *       definition PswIs95NamT, of type packed.
 *       Revision 1.8  2002/06/06 13:12:53  chinh
 *       Changed and Added Copyright
 *       Revision 1.7  2002/01/17 17:18:36  akayvan
 *       Implemented Slotted Mode mods.
 *       Revision 1.6  2001/11/20 12:26:30  mclee
 *       include pswnam.h
 *       Revision 1.5  2001/11/13 15:37:30  byang
 *       Add function prototype declaration for cpValidatePRev().
 *       Revision 1.4  2001/07/27 16:33:09  mclee
 *       Nam Consolidation fix port from 3.0 to 4.0
 *       Revision 1.3  2001/07/26 14:35:11  bcolford
 *       Add reference for Nam which is used throughout the AMPS
 *       PE software
 *       Revision 1.1  2001/01/17 10:58:50  plabarbe
 *       Initial revision
 *       Revision 1.4  2000/12/22 11:45:44  byang
 *       Consolidate IS2000 global variables into the global structure
 *       IS2000_NETWORK_PARAMETERS.
 *       Revision 1.3  2000/12/05 17:45:11  byang
 *       Idle mode - IS2000A Addendum modifications.
 *       Revision 1.2  2000/11/13 14:25:59  byang
 *       IS-2000A Idle Mode and LAC intergration - Initial Release.
 *       Revision 1.1  2000/10/24 21:11:17Z  fpeng
 *       Initial revision
 *       Revision 1.3  2000/08/23 22:09:05Z  RSATTARI
 *       Isotel release 2.8 plus LSI applicable IS-95B changes.
 *       Revision 1.14  2000/01/17 22:27:19  scotvold
 *       TC Backward Compatibility changes.
 *
 *       Revision 1.13  1999/05/19 16:28:08  mhayduk
 *       Added support for setting and retrieving value for T53 MSD
 *       P_REV 3+ setting.
 *
 *       Revision 1.12  1999/04/12 13:31:46  scotvold
 *       Added T53 HSPD support.
 *       Added 95B SCAM support.
 *       Added 95B GHDM support and consolidated with EHDM.
 *
 *       Revision 1.11  1999/02/20 00:39:52  scotvold
 *       Added message encryption support.
 *
 *       Revision 1.10  1999/02/08 22:53:10  scotvold
 *       Lint fixes.
 *
 *       Revision 1.9  1999/01/09 00:33:45  scotvold
 *       Added SSDUpdateInProgress flag interface.
 *
 *       Revision 1.8  1998/11/20 16:21:21  mhayduk
 *       Moved opmode definitions into header file.
 *
 *       Revision 1.7  1998/11/02 22:06:40  scotvold
 *       Compile switch for OP_MODEs and P_REV_IN_USEs.
 *
 *       Revision 1.6  1998/10/20 23:58:23  mhayduk
 *       Added T53 support.
 *
 *       Revision 1.5  1998/07/31 16:08:50  scotvold
 *       Wrapped Call History Parameter.
 *
 *       Revision 1.4  1998/06/08 21:48:25  scotvold
 *       Updated for Release 0.06.
 *
 * Revision 1.3  1998/03/30  23:26:03  mhayduk
 * Release 0.03.
 *
 * Revision 1.1  1997/11/06  17:49:24  mhayduk
 * Initial revision
 *
 *
 ****************************************************************************
 ****************************************************************************/


#ifndef _IDENTITY_H_

#define _IDENTITY_H_ 1

/*****************************************************************************
 * Includes
 ****************************************************************************/
#include "pch_msg.h"
#include "channel.h"
#include "systime.h"
#include "pswapi.h"

/**********************************************************************
 * Defines
 **********************************************************************/
#define CP_HASH_CDMA_CH       0
#define CP_HASH_PAGE_CH       1
#define CP_HASH_PAGE_SLOT     2
#define CP_HASH_ACCESS_CH_PN  3
#define CP_HASH_BCCH          4
#define CP_HASH_FCCCH         5
#define CP_HASH_QPCH          6
#define CP_HASH_PI_R1         7
#define CP_HASH_PI_R2         8

/* Define table for mapping op modes by index - Table 7.7.2.3.2.15-3 */
#define CP_OP_MODE_CDMA_PCS       0
#define CP_OP_MODE_CDMA_CELLULAR  1
#define CP_OP_MODE_ANALOG         2

/* type of IMSI_O */
typedef enum
{
  IMSI_O_TYPE_M = 0,
  IMSI_O_TYPE_T = 1
} IMSI_O_TYPE;

#define MEID_SIZE 7

typedef struct
{
   kal_uint16 type;
   kal_uint8  meid[MEID_SIZE + 1];
   kal_uint32 esn;
} MsidInUseT;

extern PswFTDParaT FTDPara;

static const kal_uint16 CP_INVALID_PN = 0xFFFF;

/**********************************************************************
 * Global declarations associated with Mobile's identity and shared
 * amongst files.
 **********************************************************************/

  /* NAM */
  /* Consolidate PE and PSW NAM */
extern PswIs95NamT Nam;              /* NAM data */
extern SecureDataStructT Sdata;      /* Secure data */
extern MsidInUseT _msidInUse;        /* MEID/Pseudo ESN or ESN used by CP */
/* IMSI */
extern IMSIType IMSI_O;              /* operational IMSI               */
extern kal_uint16 MCCs;
extern kal_uint8 IMSI_11_12s;
extern IMSI_O_TYPE IMSI_O_Type;

#ifdef MTK_DEV_C2K_IRAT
extern kal_uint16 MCC_1xOTA;
#endif /* MTK_DEV_C2K_IRAT */

/* System Parameters for control channels (globally viewed) */
extern SysBandChannelT CDMA_CHs;         /* contains CDMABANDs and CDMACHs */
extern kal_uint16 PILOT_PNs;
extern kal_uint8 interCorrSrchCountThresh;
extern kal_uint8 interCorrectionCorrection;
extern kal_uint8 achSleepSearchCount;

  /* Begin: added systerm identity parameters from IS-2000A */

typedef struct
{
   /* Forward Common Control Channel Parameters */
   kal_uint8            FCCCHs;
   FccchRate       FCCCH_RATEs;
   kal_uint8            FCCCH_CODE_RATEs;
   kal_uint8            FCCCH_CODE_CHANs;
   kal_uint8            FCCCH_IDs;
   kal_uint8            NUM_FCCCHs;
   kal_uint8            FCCCH_CODE_CHAN[ CP_MAX_FCCCH_CODE_CHAN ];

    /* SR1 Parameters */
   kal_uint8            BCNs;
   BcchRate        BRATs;
   kal_uint8            BCCH_CODE_RATEs;
   kal_uint8            BCCHs;
   kal_bool            SR1_BCCH_SUPPORTEDs;
   Sr1TdModes      SR1_TD_MODEs;
   Sr1TdPowerLevel SR1_TD_POWER_LEVELs;
   BcchRate        SR1_BRAT_TDs;
   kal_uint8            SR1_CRAT_TDs;
   BcchRate        SR1_BRAT_NON_TDs;
   kal_uint8            SR1_CRAT_NON_TDs;
   kal_uint8            BCCH_CODE_CHAN_TDs;
   kal_uint8            BCCH_CODE_CHAN_NON_TDs;

   /* SR3 Parameters */
   kal_bool            SR3_INCLs;
   kal_uint8            SR3_PRIMARY_PILOTs;
   kal_uint8            SR3_PILOT_POWER1s;
   kal_uint8            SR3_PILOT_POWER2s;

    /* BCast Parameters */
   kal_uint8            NUM_BCCH_BCASTs;
   BcchBcast       BCCH_BCAST[ MAX_NUM_BCCH_BCAST ];

    /* Quick Paging Channel Parameters */
   kal_bool            QPCH_SUPPORTEDs;
   kal_uint8            NUM_QPCHs;
   kal_uint8            QPAGECHs;
   kal_uint8            ASSIGNED_QPAGECHs;
   QpchRate        QPCH_RATEs;
   QpchTransPwr    QPCH_POWER_LEVEL_PAGEs;
   kal_bool            QPCH_CCI_SUPPORTEDs;
   QpchTransPwr    QPCH_POWER_LEVEL_CONFIGs;
   kal_bool            QPCH_BI_SUPPORTEDs;
   QpchTransPwr    QPCH_POWER_LEVEL_BCASTs;

    /* Network Feature Parameters */
   kal_bool            CS_SUPPORTEDs;
   kal_bool            SDB_SUPPORTEDs;
} IS2000NetworkParameters;

extern IS2000NetworkParameters IS2000_NETWORK_PARAMETERS;

/* End: added systerm identity parameters from IS-2000A */

extern kal_uint8 P_REVs;
extern kal_uint8 MIN_P_REVs;
extern kal_uint8 P_REV_IN_USEs;

/* this group may only be local to eng_init.c */
extern kal_uint8 SERVSYSs;

/* Scratch Buffer */
extern kal_uint8 scratch_[];

/* Rx Msg Static Union */
extern RxMsg rxMsg_;

/**********************************************************************
 * Prototypes of utilities used in setting/retrieving identity information.
 **********************************************************************/

void initializeIdentity( void );
kal_bool retrieveRedirectionChannel( SysBandChannelT *channel);
kal_bool cpIsOpModeSupported(kal_uint8 opMode);
kal_uint32 divideIntegers(kal_uint32 div,kal_uint32 base,kal_uint32 upper,kal_uint32 *rem);
kal_uint16 hash(kal_uint16 range,kal_uint8 application);
void randomNumberSetSeed(kal_uint32 time);
kal_uint32 randomInteger(kal_uint32 range);
kal_uint16 TenBitsToDigital(kal_uint16 n);
kal_bool  cpAccessPsistDelay(kal_uint8 psist, kal_uint8 psist_emg,kal_uint8 accolc,kal_bool secondTerm,
                         kal_uint8 typePsist,kal_bool *fail);
void  cpInitializeCallHistoryParm (kal_uint8 count);
kal_uint8 cpGetCallHistoryParm (void);
void  cpIncrementCallHistoryParm (void);

void setSSDUpdateInProgress (kal_bool ssdUpdateState);
kal_bool ssdUpdateInProgress (void);

kal_bool iAm95 (void);
kal_bool iAm95A (void);
kal_bool iAmTSB74 (void);
kal_bool iAmJSTD008 (void);
kal_bool iAmT53Stream (void);
kal_bool iAmT53Plus (void);
kal_bool cpValidatePRev( const kal_uint8 pRev );

#endif /* _IDENTITY_H_ */
/**Log information: \main\CBP80\cbp80_cshen_scbp10098\1 2012-07-26 06:27:57 GMT cshen
** cbp80_cshen_scbp10098**/