[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P2.T800.L1.240604.240828
MTK modem version: MOLY01412232_AUTO00325147(For_MOBILETEK2735_IVT_T800_V1_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P2).tar.gz
RF modem version: T800/l1-2024_0604.rar
Change-Id: If357be918ddf4c7b7ee4c07e1a414a26c615f3ea
diff --git a/Delete_file_list.txt b/Delete_file_list.txt
new file mode 100644
index 0000000..7116e02
--- /dev/null
+++ b/Delete_file_list.txt
@@ -0,0 +1,2 @@
+[remove]
+PatchList_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P1.xls
diff --git a/PatchList_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P2.xls b/PatchList_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P2.xls
new file mode 100644
index 0000000..75634eb
--- /dev/null
+++ b/PatchList_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P2.xls
Binary files differ
diff --git a/mcu/custom/service/mcf/system_files/mcf_system.csv b/mcu/custom/service/mcf/system_files/mcf_system.csv
index 2daa381..38a4198 100644
--- a/mcu/custom/service/mcf/system_files/mcf_system.csv
+++ b/mcu/custom/service/mcf/system_files/mcf_system.csv
@@ -1,86 +1,86 @@
ID,LID Number,LID Name,Record ID,Variable Name,Variable Path,Support MCF,Lock,Internal,DOC,Runtime,Description,Variable Type,Variable Size,Array Size,Bit Count,Default Value,Branch,Default Value by OP,Valid Value,Write Back to NVRAM,Related Parameter(s),Dependency,Feature Name,Category,RD UT result,RD IT result,How to test,Test Result,Status,Due Date,Review Reason,Note
1,60186,NVRAM_EF_AST_TL1_DAT_PARAM_LID,1,datFlag,TL1D_DAT_CONFIG.datFlag,OTA,no,no,no,no,"0 disable, and the following iterm is not valid; 1 enable, the following iterm is valid",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-2,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-3,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-4,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-5,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-6,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-7,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-9,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-10,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-11,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-12,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-13,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-14,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-15,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-16,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-17,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-18,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-19,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-20,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-21,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-22,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-23,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-24,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-25,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-26,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-27,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-28,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-29,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-30,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-31,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-32,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-33,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-34,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-35,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-36,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-37,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-38,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-39,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-40,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-41,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-42,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-43,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-44,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-45,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-46,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-47,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-48,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-49,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-50,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-51,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-52,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-53,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-54,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-55,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-56,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-57,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-58,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-59,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-60,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-61,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-62,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-63,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-64,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-65,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-66,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-67,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-68,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-69,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-70,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-71,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-72,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-73,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-74,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-75,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-76,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-77,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-78,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-79,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-80,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-81,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-82,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+2,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+3,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+4,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+5,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+6,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+7,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+9,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+10,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+11,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+12,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+13,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+14,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+15,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+16,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+17,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+18,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+19,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table1.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+20,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+21,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+22,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+23,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+24,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+25,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+26,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+27,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+28,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table2.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+29,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+30,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+31,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+32,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+33,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+34,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+35,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+36,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+37,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table3.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+38,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+39,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+40,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+41,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+42,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+43,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+44,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+45,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+46,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table4.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+47,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+48,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+49,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+50,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+51,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+52,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+53,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+54,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+55,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table5.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+56,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+57,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+58,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+59,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+60,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+61,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+62,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+63,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+64,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table6.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+65,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+66,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+67,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+68,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+69,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+70,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+71,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+72,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+73,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table7.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+74,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+75,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+76,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+77,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+78,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+79,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+80,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+81,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+82,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table8.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
83,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,High Speed Downlink Packet Access (TDSCDMA HSPA),3G,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
84,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,High Speed Downlink Packet Access (TDSCDMA HSPA),3G,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
85,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,TxPower_Offset[0~15].TxPower_offset_DefaultTable.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,High Speed Downlink Packet Access (TDSCDMA HSPA),3G,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
@@ -821,7 +821,7 @@
820,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,enable,factory.algo_err_dump_iq.enable,OTA,no,no,yes,no,algorithm error dump iq,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
821,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,blk_lp_idx,factory.force_dump_iq.blk_lp_idx,OTA,no,no,yes,no,force dump iq,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
822,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,cal_item,factory.force_dump_iq.cal_item,OTA,no,no,yes,no,force dump iq,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-823,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,cbw,factory.force_dump_iq.cbw,OTA,no,no,yes,no,force dump iq,UNION,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+823,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,cbw,factory.force_dump_iq.cbw,Not Support,no,no,yes,no,force dump iq,UNION,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
824,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,comp_route,factory.force_dump_iq.comp_route,OTA,no,no,yes,no,force dump iq,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
825,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,dump_type,factory.force_dump_iq.dump_type,OTA,no,no,yes,no,force dump iq,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
826,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,edge_lp_idx,factory.force_dump_iq.edge_lp_idx,OTA,no,no,yes,no,force dump iq,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
@@ -1091,36 +1091,36 @@
1098,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b2,background_search_status_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.3G4 FDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
1099,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b3,background_search_status_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.2G4 TDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
1100,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b4,background_search_status_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.3G4 TDD Background Search.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init] Use NVRAM default value.<BR>[Test Step]<BR>1. Take turns to switch on different xG4 Background search switch by MCF tool.<BR>2. Set UE moves into source RAT (e.g. Set 3G is active RAT if you want to verify 3G4 BG search)<BR>[Expected Result]<BR>According to the switch status, Background procedure shall be executed accordingly.",Pass,,,,
-1101,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b5,background_search_status_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.Reserved.,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Reserved bits,,,NO,MD Config,Modem - Customer Requirement,,,NA (Reserved),Untested,,,,
+1101,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",background_search_status_in_test_mode.b5,background_search_status_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]Background Search related parameter setting when UE in test mode.Reserved.,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Reserved bits,,,NO,MD Config,Modem - Customer Requirement,,,NA (Reserved),Pass,,,,
1102,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",c2k_to_lte_rsrp_delta,c2k_to_lte_rsrp_delta,Not Support,no,yes,no,no,[INTERNAL]Debug only,SHORT,2,,,"0x0018,",NR15.R3.MD700.IVT.MP1MR3.MP,,-32768 to 32767:RSRP,,,__CDMA2000_RAT__,MD Config,Modem - Customer Requirement,,,NA (Phase out),Untested,,,,
1103,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",carrs_interval,carrs_interval,Not Support,no,yes,no,no,[INTERNAL]PHASE OUT,UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 255:time interval,,,NO (Phase out),"Network Search Optimization - Fast Roaming, Fast List, Early Roaming Detection",MTK Proprietary,,,NA (Phase out),Untested,,,,
1104,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",crc_ng_tim_shift,crc_ng_tim_shift,OTA and OTA BY OP,no,no,no,no,[MCF]CRC NG timer,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 255:time shift in ms,,,NO,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 5 min<BR>[Init]: Use NVRAM default value<BR>[Test Step]<BR>1. Set SI window length in machine<BR>2. Set wanted CRC NG timer shift value by MCF tool<BR>3. Power on and make SIB CRC NG happen in test<BR>[Expected Result]<BR>UE shall enlarge CRC NG timer duration by timer shift value.,Untested,,,,
1105,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status,csfb_enhancement_item_status,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabled",UNSIGNED CHAR,1,,,0x1f,NR15.R3.MD700.IVT.MP1MR3.MP,,"0 ~ 255: Bitmask [b1: not used, b2: Reduce LAU, b3: Defer SI13, b4: 2G AFR, b5: 3G AFR, b6-b8:Reserved]",,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
-1106,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b1,csfb_enhancement_item_status.b1,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disablednot used",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Not used),Untested,,,,
+1106,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b1,csfb_enhancement_item_status.b1,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disablednot used",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Not used),Pass,,,,
1107,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b2,csfb_enhancement_item_status.b2,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledReduce LAU",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1108,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b3,csfb_enhancement_item_status.b3,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledDefer SI13",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1109,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b4,csfb_enhancement_item_status.b4,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabled2G AFR",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
1110,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b5,csfb_enhancement_item_status.b5,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabled3G AFR",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,___DISABLE_3G_AFR__,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1111,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b6,csfb_enhancement_item_status.b6,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledreserved",BIT,3,,3,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
+1111,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status.b6,csfb_enhancement_item_status.b6,OTA and OTA BY OP,no,no,no,no,"[MCF]CSFB/AFR related parameter setting. AN:If enable ___DISABLE_3G_AFR__, 3G AFR will be disabledreserved",BIT,3,,3,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Pass,,,,
1112,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2,csfb_enhancement_item_status_2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,"0 ~ 255: Bitmask [b1: 2G FDD eCSFB, b2: 3G FDD eCSFB, b3: 2G TDD eCSFB, b4: 3G TDD eCSFB, b5-b8:Reserved]",,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1113,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b1,csfb_enhancement_item_status_2.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.2G FDD eCSFB,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1114,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b2,csfb_enhancement_item_status_2.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.3G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1115,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b3,csfb_enhancement_item_status_2.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.2G TDD eCSFB,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1116,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b4,csfb_enhancement_item_status_2.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.3G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
-1117,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b5,csfb_enhancement_item_status_2.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.reserved,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
+1117,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2.b5,csfb_enhancement_item_status_2.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part2.reserved,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Pass,,,,
1118,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode,csfb_enhancement_item_status_2_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0 ~ 255: Bitmask [b1: 2G FDD eCSFB, b2: 3G FDD eCSFB, b3: 2G TDD eCSFB, b4: 3G TDD eCSFB, b5-b8:Reserved]",,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1119,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b1,csfb_enhancement_item_status_2_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.2G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1120,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b2,csfb_enhancement_item_status_2_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.3G FDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1121,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b3,csfb_enhancement_item_status_2_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.2G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__ECSFB__,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1122,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b4,csfb_enhancement_item_status_2_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.3G TDD eCSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
-1123,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b5,csfb_enhancement_item_status_2_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.reserved,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
+1123,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_2_in_test_mode.b5,csfb_enhancement_item_status_2_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting part 2 when UE in test mode.reserved,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Pass,,,,
1124,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode,csfb_enhancement_item_status_in_test_mode,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.,UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,"0 ~ 255: Bitmask [b1: not used, b2: Reduce LAU, b3: Defer SI13, b4: 2G AFR, b5: 3G AFR, b6-b8:Reserved]",,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
-1125,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b1,csfb_enhancement_item_status_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.not used,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Not used),Untested,,,,
+1125,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b1,csfb_enhancement_item_status_in_test_mode.b1,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.not used,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Not used),Pass,,,,
1126,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b2,csfb_enhancement_item_status_in_test_mode.b2,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.Reduce LAU,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1127,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b3,csfb_enhancement_item_status_in_test_mode.b3,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.Defer SI13,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Pass,,,,
1128,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b4,csfb_enhancement_item_status_in_test_mode.b4,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.2G AFR,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
1129,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b5,csfb_enhancement_item_status_in_test_mode.b5,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.3G AFR,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,___DISABLE_3G_AFR__,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform CSFB<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly (e.g. perform AFR and so on),Untested,,,,
-1130,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b6,csfb_enhancement_item_status_in_test_mode.b6,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.reserved,BIT,3,,3,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Untested,,,,
+1130,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",csfb_enhancement_item_status_in_test_mode.b6,csfb_enhancement_item_status_in_test_mode.b6,OTA and OTA BY OP,no,no,no,no,[MCF]CSFB/AFR related parameter setting when UE in test mode.reserved,BIT,3,,3,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,NA (Reserved),Pass,,,,
1131,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_handover_other_si_protection_tim_val,customer_handover_other_si_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI when HO,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Handover<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Untested,,,,
1132,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_handover_si1_protection_tim_val,customer_handover_si1_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI1 when HO,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Handover<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Untested,,,,
1133,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",customer_other_si_protection_tim_val,customer_other_si_protection_tim_val,OTA and OTA BY OP,no,no,no,no,[MCF]protection timer for SI,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1 ~ 65535:timer duration value<BR>0:Disable,,,NO,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y)<BR>Test Time (minutes): Shall be no longer than 1 hour in total<BR>[Init] Use NVRAM default value<BR>[Test Step]<BR>1. Take turns to set corresponding bit by MCF tool<BR>2. Power on and attach NW<BR>3. Perform Registration<BR>[Expected Result]<BR>UE reacts by various bit function setting accordingly.,Pass,,,,
@@ -1129,29 +1129,29 @@
1136,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",earfcn,designated_carrier_inf.black_freq_list[0~39].earfcn,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED INT,4,,,"0x5e, 0x97, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 2^32-1:EARFCN,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1137,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc1,designated_carrier_inf.black_freq_list[0~39].plmn_id.mcc1,OTA and OTA BY OP,no,yes,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1138,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc2,designated_carrier_inf.black_freq_list[0~39].plmn_id.mcc2,OTA and OTA BY OP,no,yes,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x06,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1139,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc3,designated_carrier_inf.black_freq_list[0~39].plmn_id.mcc3,OTA and OTA BY OP,no,yes,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1140,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc1,designated_carrier_inf.black_freq_list[0~39].plmn_id.mnc1,OTA and OTA BY OP,no,yes,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1141,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc2,designated_carrier_inf.black_freq_list[0~39].plmn_id.mnc2,OTA and OTA BY OP,no,yes,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
+1139,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc3,designated_carrier_inf.black_freq_list[0~39].plmn_id.mcc3,OTA and OTA BY OP,no,yes,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1140,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc1,designated_carrier_inf.black_freq_list[0~39].plmn_id.mnc1,OTA and OTA BY OP,no,yes,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1141,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc2,designated_carrier_inf.black_freq_list[0~39].plmn_id.mnc2,OTA and OTA BY OP,no,yes,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
1142,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc3,designated_carrier_inf.black_freq_list[0~39].plmn_id.mnc3,OTA and OTA BY OP,no,yes,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1143,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",black_freq_num,designated_carrier_inf.black_freq_num,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 40:black frequency number,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1144,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",earfcn,designated_carrier_inf.freq_list[0~19].earfcn,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 2^32-1:EARFCN,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1145,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc1,designated_carrier_inf.freq_list[0~19].plmn_id.mcc1,OTA and OTA BY OP,no,yes,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 9:MCC digit<BR>0x0F:Unused MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1146,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc2,designated_carrier_inf.freq_list[0~19].plmn_id.mcc2,OTA and OTA BY OP,no,yes,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1147,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc3,designated_carrier_inf.freq_list[0~19].plmn_id.mcc3,OTA and OTA BY OP,no,yes,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1148,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc1,designated_carrier_inf.freq_list[0~19].plmn_id.mnc1,OTA and OTA BY OP,no,yes,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1149,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc2,designated_carrier_inf.freq_list[0~19].plmn_id.mnc2,OTA and OTA BY OP,no,yes,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1150,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc3,designated_carrier_inf.freq_list[0~19].plmn_id.mnc3,OTA and OTA BY OP,no,yes,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1151,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",freq_num,designated_carrier_inf.freq_num,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 20:designated frequency number,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
+1143,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",black_freq_num,designated_carrier_inf.black_freq_num,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 40:black frequency number,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1144,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",earfcn,designated_carrier_inf.freq_list[0~19].earfcn,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 2^32-1:EARFCN,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1145,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc1,designated_carrier_inf.freq_list[0~19].plmn_id.mcc1,OTA and OTA BY OP,no,yes,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 9:MCC digit<BR>0x0F:Unused MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1146,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc2,designated_carrier_inf.freq_list[0~19].plmn_id.mcc2,OTA and OTA BY OP,no,yes,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1147,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc3,designated_carrier_inf.freq_list[0~19].plmn_id.mcc3,OTA and OTA BY OP,no,yes,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1148,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc1,designated_carrier_inf.freq_list[0~19].plmn_id.mnc1,OTA and OTA BY OP,no,yes,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1149,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc2,designated_carrier_inf.freq_list[0~19].plmn_id.mnc2,OTA and OTA BY OP,no,yes,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1150,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc3,designated_carrier_inf.freq_list[0~19].plmn_id.mnc3,OTA and OTA BY OP,no,yes,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
+1151,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",freq_num,designated_carrier_inf.freq_num,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 20:designated frequency number,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
1152,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",band_list,designated_carrier_inf.priority_band_inf[0~15].band_list,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED SHORT,128,64,,"0x05, 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,1 ~ 256:LTE Band Indicator,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1153,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",band_num,designated_carrier_inf.priority_band_inf[0~15].band_num,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 64:Band number,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1154,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc1,designated_carrier_inf.priority_band_inf[0~15].plmn_id.mcc1,OTA and OTA BY OP,no,yes,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1155,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc2,designated_carrier_inf.priority_band_inf[0~15].plmn_id.mcc2,OTA and OTA BY OP,no,yes,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1156,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc3,designated_carrier_inf.priority_band_inf[0~15].plmn_id.mcc3,OTA and OTA BY OP,no,yes,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
+1156,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mcc3,designated_carrier_inf.priority_band_inf[0~15].plmn_id.mcc3,OTA and OTA BY OP,no,yes,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MCC digit<BR>0 ~ 9:MCC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
1157,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc1,designated_carrier_inf.priority_band_inf[0~15].plmn_id.mnc1,OTA and OTA BY OP,no,yes,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1158,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc2,designated_carrier_inf.priority_band_inf[0~15].plmn_id.mnc2,OTA and OTA BY OP,no,yes,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x09,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1159,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",mnc3,designated_carrier_inf.priority_band_inf[0~15].plmn_id.mnc3,OTA and OTA BY OP,no,yes,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:Unused MNC digit<BR>0 ~ 9:MNC digit,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1160,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",priority_band_inf_num,designated_carrier_inf.priority_band_inf_num,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 16:priority band information number,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
-1161,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",priority_band_set_by_em,designated_carrier_inf.priority_band_set_by_em,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:KAL_TRUE (priority band is set by EM)<BR>0:KAL_FALSE,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
+1161,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",priority_band_set_by_em,designated_carrier_inf.priority_band_set_by_em,OTA and OTA BY OP,no,yes,no,no,[MCF],UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:KAL_TRUE (priority band is set by EM)<BR>0:KAL_FALSE,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
1162,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_cust_qqual,enable_cust_qqual,OTA and OTA BY OP,no,no,no,no,[MCF][Doc] Customized Qqualmin,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:KAL_TRUE (Enable)<BR>0:KAL_FALSE (Disable),,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value in NVRAM and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
1163,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_cust_qrxlev,enable_cust_qrxlev,OTA and OTA BY OP,no,no,no,no,[MCF][Doc] Customized Qrxlevmin,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:KAL_TRUE (Enable)<BR>0:KAL_FALSE (Disable),,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell selection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell selection time<BR>2. Set customization value in NVRAM and perform 2nd trial, record the cell selection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Untested,,,,
1164,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_cust_resel_s_judge,enable_cust_resel_s_judge,OTA and OTA BY OP,no,no,no,no,[MCF]Customized reselection SIB1 Srxlev judge,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:KAL_TRUE (cell_reject_ind = TRUE)<BR>0:KAL_FALSE (cell_reject_ind = FALSE),,,NO,LTE Protocol (R9 Baseline),4G,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route or a cell reselection relevant GCF test case.<BR>[Test Step]<BR>1. Use default value to perform 1st trial, record the cell reselection time<BR>2. Set customization value in NVRAM and perform 2nd trial, record the cell reselection time<BR>3. Compare two test result, measure the latency.<BR>[Expected Result]<BR>2nd trial cell selection time shall not longer than 1st one.",Pass,,,,
@@ -1220,7 +1220,7 @@
1227,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",list1_used_carr_max,list1_used_carr_max,Not Support,no,yes,no,no,[INTERNAL]PHASE OUT,UNSIGNED CHAR,1,,,0x20,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 255:maximum carrier number,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Phase out),Untested,,,,
1228,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",low_pri_si_crc_ng_max,low_pri_si_crc_ng_max,OTA and OTA BY OP,no,no,no,no,[MCF]Low SI CRC NG count,UNSIGNED CHAR,1,,,0x10,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 255:Allowed maximum Low priority SI CRC NG count,,,NO,MD Config,Modem - Customer Requirement,,,"Test in machine (Y or N is okay)<BR>Test Time (minutes): It depends but shall not longer than 10.<BR>[Init]<BR>1. Use NVRAM default value<BR>2. Prepare NW side environment, e.g. a known FT route in which handover event and low priority SI CRC error occur.<BR>[Test Step]<BR>1. Use default value to perform VoLTE call test, record handover successful rate.<BR>2. Set customization value in NVRAM and perform 2nd trial, record the handover successful rate.<BR>3. Compare two test results, measure the difference.<BR>[Expected Result]<BR>Larger low priority SI CRC NG value leads to longer measurement relevant procedure time.",Untested,,,,
1229,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",lte_to_c2k_rsrp_threshold,lte_to_c2k_rsrp_threshold,Not Support,no,yes,no,no,[INTERNAL]Debug only,SHORT,2,,,0xfe14,NR15.R3.MD700.IVT.MP1MR3.MP,,-32768 ~ 32767:RSRP threshold,,,__CDMA2000_RAT__,IRAT(C2K-LTE),OP Requirement,,,NO (Internal),Untested,,,,
-1230,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",max_kraerr,max_kraerr,OTA and OTA BY OP,no,yes,no,no,[INTERNAL],UNSIGNED CHAR,1,,,0x0a,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 60:Bar cell action count,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
+1230,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",max_kraerr,max_kraerr,OTA and OTA BY OP,no,yes,no,no,[INTERNAL],UNSIGNED CHAR,1,,,0x0a,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 60:Bar cell action count,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Pass,,,,
1231,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",max_nw_rej_wait_count,max_nw_rej_wait_count,Not Support,no,yes,no,no,[INTERNAL],UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ 255:maximum NW reject wait count,,,NO,LTE Protocol (R9 Baseline),4G,,,NO (Internal),Untested,,,,
1232,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",max_rsrp_threshold,max_rsrp_threshold,OTA and OTA BY OP,no,no,no,no,[TIER1]Customized maximum rsrp threshold for B2 measurement report,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,-32768 ~ 32767:Maximum RSRP threshold,,,"__EVENTB2_THRESHOLD_ADJ_VILTE__, __EVENTB2_THRESHOLD_ADJ__, __EVENTB2_THRESHOLD_MAX_ADJ__",MD Config,Modem - Customer Requirement,,,follow MCF RD IT SOP,Pass,,,,
1233,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",max_rsrp_threshold_vilte,max_rsrp_threshold_vilte,OTA and OTA BY OP,no,no,no,no,[TIER1]Customized maximum rsrp threshold for B2 measurement report when UE is in vilte,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,-32768 ~ 32767:Maximum RSRP threshold,,,"__EVENTB2_THRESHOLD_ADJ_VILTE__, __EVENTB2_THRESHOLD_ADJ_VILTE__",MD Config,Modem - Customer Requirement,,,follow MCF RD IT SOP,Pass,,,,
@@ -1302,10 +1302,10 @@
1309,1349,NVRAM_EF_HVOLTE_E911_LID,"1,2",reserved_9,reserved_9,Not Support,no,no,no,no,reserved_9,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1310,1349,NVRAM_EF_HVOLTE_E911_LID,"1,2",t_volte_hys,t_volte_hys,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]T VoLTE hys timer",UNSIGNED INT,4,,,"0x3c, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,any:second,,,,IMS,IMS,,,,Pass,,,,
1311,1349,NVRAM_EF_HVOLTE_E911_LID,"1,2",t_wwan_911,t_wwan_911,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]T wwan E911 timer",UNSIGNED INT,4,,,"0x28, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,IMS,IMS,,,,Pass,,,,
-1312,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",allow_emergency_dereg,imc_config.allow_emergency_dereg,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>To allow UE do emergency dereg or deactivate emergency PDN<BR>0:Not allow to deregistration from IMS<BR>1:Allow to deregistration from IMS then deactivate emergency PDN<BR>2:Deactivate emergency PDN without IMS deregistration<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not allow to deregistration from IMS<BR>1:Allow to deregistration from IMS then deactivate emergency PDN<BR>2:Deactivate emergency PDN without IMS deregistration,,,,IMS,IMS,,,[Init] <BR>[Test Step]<BR>1. E-911 on LTE<BR>2. handup call<BR>[Expected Result]<BR>check OTA massage<BR>0: E-PDN will not be deactived<BR>1/2: E-PDN will be deactived,Untested,,,,
+1312,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",allow_emergency_dereg,imc_config.allow_emergency_dereg,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>To allow UE do emergency dereg or deactivate emergency PDN<BR>0:Not allow to deregistration from IMS<BR>1:Allow to deregistration from IMS then deactivate emergency PDN<BR>2:Deactivate emergency PDN without IMS deregistration<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not allow to deregistration from IMS<BR>1:Allow to deregistration from IMS then deactivate emergency PDN<BR>2:Deactivate emergency PDN without IMS deregistration,,,,IMS,IMS,,,[Init] <BR>[Test Step]<BR>1. E-911 on LTE<BR>2. handup call<BR>[Expected Result]<BR>check OTA massage<BR>0: E-PDN will not be deactived<BR>1/2: E-PDN will be deactived,Pass,,,,
1313,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",allow_emergency_dereg.allow_emergency_dereg,imc_config.allow_emergency_dereg.allow_emergency_dereg,Not Support,no,no,no,no,[MCF]To allow UE do emergency dereg or deactivate emergency PDNbit 0:0:Not allow to deregistration from IMSbit 1:1:Allow to deregistration from IMS then deactivate emergency PDNbit 2:2:Deactivate emergency PDN without IMS deregistration,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1314,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",att_family,imc_config.att_family,Not Support,no,yes,no,no,Configuration for ATT/Cricket/Firstnet,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1315,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",audio_bearer_lost_retain_timer,imc_config.audio_bearer_lost_retain_timer,OTA and OTA BY OP,no,no,no,no,Audio bearer reserve waiting timer when bearer lost or waiting bearer allocation from NW while 183 session progress. The configuration is useless while setting to 0 (will apply resource_retain_timer)<BR>1000: UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated audio bearer. And UE will drop IMS call when timer expired (do CSFB if possible).<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1000:UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated audio bearer,,,,IMS,IMS,,,"[Init] IMS Register on 4G, make WFC call<BR>[Special condition] NW does not issue a audio dedicated bearer on LTE<BR>[Test Step] disable wifi ap to trigger handover<BR>[Expected Result] <BR> with default value (apply resource_retain_timer): call will drop after handover to LTE within resource_retain_timer<BR> config to 500ms : call will drop after handover to LTE immediately",Untested,,,,
+1315,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",audio_bearer_lost_retain_timer,imc_config.audio_bearer_lost_retain_timer,OTA and OTA BY OP,no,no,no,no,Audio bearer reserve waiting timer when bearer lost or waiting bearer allocation from NW while 183 session progress. The configuration is useless while setting to 0 (will apply resource_retain_timer)<BR>1000: UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated audio bearer. And UE will drop IMS call when timer expired (do CSFB if possible).<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1000:UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated audio bearer,,,,IMS,IMS,,,"[Init] IMS Register on 4G, make WFC call<BR>[Special condition] NW does not issue a audio dedicated bearer on LTE<BR>[Test Step] disable wifi ap to trigger handover<BR>[Expected Result] <BR> with default value (apply resource_retain_timer): call will drop after handover to LTE within resource_retain_timer<BR> config to 500ms : call will drop after handover to LTE immediately",Pass,,,,
1316,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_re_reg_base_timer,imc_config.auto_re_reg_base_timer,OTA and OTA BY OP,no,no,no,no,"Followed by RFC5626 4.5 Flow Recovery. W = min (max_time, (base_time *(2 ^ consecutive-failures))).<BR>unit: ms<BR>",UNSIGNED INT,4,,,30000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,prerequiste: simulate NW to reply error response(e.g 404) to REGISTER<BR>steps: IMS registration<BR>=> check if 1st IMS registration retry interval is auto_re_reg_base_timer,Untested,,,,
1317,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_re_reg_max_timer,imc_config.auto_re_reg_max_timer,OTA and OTA BY OP,no,no,no,no,"Followed by RFC5626 4.5 Flow Recovery. W = min (max_time, (base_time *(2 ^ consecutive-failures))).<BR>unit: ms<BR>",UNSIGNED INT,4,,,1800000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,prerequiste: simulate NW to reply error response(e.g 404) to REGISTER<BR>steps: IMS registration<BR>=> check if longest IMS registration retry interval is auto_re_reg_max_timer,Untested,,,,
1318,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_re_reg_timer,imc_config.auto_re_reg_timer,OTA and OTA BY OP,no,no,no,no,A timer to guarantee UE would re-register to IMS whenever entering IMS un-registered state. <BR>unit: ms<BR>,UNSIGNED INT,4,,,5000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Test Step] NW disconnect<BR>[Expected Result] <BR>UE will retry IMS register with setting timer,Untested,,,,
@@ -1325,7 +1325,7 @@
1332,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_isim_application.disable_isim_application,imc_config.disable_isim_application.disable_isim_application,Not Support,no,no,no,no,[MCF]Disable ISIM application during IMS registration for some reason such as ISIM is valid while the parameter is wrongbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1333,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",e911_resource_retain_timer,imc_config.e911_resource_retain_timer,OTA and OTA BY OP,no,no,no,no,"Bearer reserve waiting timer for E911 call, time for which the UE will have to wait for the dedicated EPS bearer setup from NW. <BR>0:Disable<BR>other value: time duration<BR>unit: ms<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,,IMS,IMS,,,[Test Step]emergency call<BR>[Expected Result]. ECC can setup if NW assign dedicated bearer before 900s after SDP negoiation done",Pass,,,,
1334,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ecc_guard_timer,imc_config.ecc_guard_timer,OTA and OTA BY OP,no,no,no,no,"To protect overall ECC call establishment time. From dial number to dedicated EPS bearer established, not including 183 Ringing. <BR>unit: sec<BR>",UNSIGNED CHAR,1,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] (This config only works with specific operator)set NW does not response invite<BR>[Test Step]<BR>1. make E-call on LTE<BR>[Expected Result]<BR>VoLTE call will fail after 10 sec(default), when NW does not response",Untested,,,,
-1335,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emc_dereg_while_volte_off,imc_config.emc_dereg_while_volte_off,OTA and OTA BY OP,no,no,no,no,whether allow emergency dereg while volte off<BR>0: not allow<BR>1: allow,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not allow<BR>1:allow,,,,IMS,IMS,,,"[Init] IMS Register on 4G, and enable VoLTE.<BR>[Test Step]<BR>1. Make ecc VoLTE call<BR>2. after call end, set volte off <BR>[Expected Result] <BR>UE do ecc volte dereg",Untested,,,,
+1335,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emc_dereg_while_volte_off,imc_config.emc_dereg_while_volte_off,OTA and OTA BY OP,no,no,no,no,whether allow emergency dereg while volte off<BR>0: not allow<BR>1: allow,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not allow<BR>1:allow,,,,IMS,IMS,,,"[Init] IMS Register on 4G, and enable VoLTE.<BR>[Test Step]<BR>1. Make ecc VoLTE call<BR>2. after call end, set volte off <BR>[Expected Result] <BR>UE do ecc volte dereg",Pass,,,,
1336,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emc_dereg_while_volte_off.emc_dereg_while_volte_off,imc_config.emc_dereg_while_volte_off.emc_dereg_while_volte_off,Not Support,no,no,no,no,[MCF]Control whether release emergency PDN when turn off VOLTE.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1337,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_call_learning_support,imc_config.emergency_call_learning_support,Not Support,no,yes,no,no,Deprecated<BR>,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1338,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_pdn_retain_timer,imc_config.emergency_pdn_retain_timer,OTA and OTA BY OP,no,no,no,no,"Emergency pdn establishment max waiting time which mentions the time to wait for PDN bearer establishment from NW when requested for emergency PDN. <BR>10000 , UE will start a 10sec timer waiting for E-PDN setup. And UE will drop IMS emergency call when timer expired (try other call domain if possible)<BR>unit: ms<BR>",UNSIGNED INT,4,,,10000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] Camp on 4G ready to activate IMS PDN<BR>[Special Condition] NW will not response E-PDN<BR>[Test Step] UE make emergency call over IMS<BR>[Expected Result] <BR> with default value (10sec): UE will abort E-PDN activation after 10sec and try emergency call on next RAT.<BR> config to 3sec : UE will abort E-PDN activation after 3sec and try emergency call on next RAT.,Pass,,,,
@@ -1457,7 +1457,7 @@
1464,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",silent_deact,imc_config.silent_deact,Not Support,no,yes,no,no,module internal config<BR>---<BR>IMCB will not trigger PDN deact and self change state to BEARER_DEACTIVATED.<BR>(For specific operator with some specific SIP error)<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1465,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",silent_pdn_deact,imc_config.silent_pdn_deact,Not Support,no,yes,no,no, module internal config<BR>IMCB will not trigger PDN deact and self change state to BEARER_DEACTIVATED (for general usage)<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1466,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_support,imc_config.sms_support,Not Support,no,yes,no,no,The configuration will be overwritten by AP config in runtime<BR>0:Not support<BR>1:Support<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not support<BR>1:Support,,,,,,,,,Untested,,,,
-1467,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",srvcc_no_ims_dereg_until_call_rel,imc_config.srvcc_no_ims_dereg_until_call_rel,OTA and OTA BY OP,no,no,no,no,"When enabled, after SRVCC to 23G, UE doesn't send IMS de-registration to network before call is released.<BR>0:Disable<BR>1:Enable",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,[Init] set srvcc_no_ims_dereg_until_call_rel = 1<BR>[Test Step]<BR>1. register on LTE and make call<BR>2. SRVCC to 23G<BR>[Expected Result]<BR>UE trigger de-reg after SRVCC when CS call on-going,Untested,,,,
+1467,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",srvcc_no_ims_dereg_until_call_rel,imc_config.srvcc_no_ims_dereg_until_call_rel,OTA and OTA BY OP,no,no,no,no,"When enabled, after SRVCC to 23G, UE doesn't send IMS de-registration to network before call is released.<BR>0:Disable<BR>1:Enable",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,[Init] set srvcc_no_ims_dereg_until_call_rel = 1<BR>[Test Step]<BR>1. register on LTE and make call<BR>2. SRVCC to 23G<BR>[Expected Result]<BR>UE trigger de-reg after SRVCC when CS call on-going,Pass,,,,
1468,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",srvcc_no_ims_dereg_until_call_rel.srvcc_no_ims_dereg_until_call_rel,imc_config.srvcc_no_ims_dereg_until_call_rel.srvcc_no_ims_dereg_until_call_rel,Not Support,no,no,no,no,"[MCF]When enabled, after SRVCC to 23G, UE doesn't send IMS de-registration to network before call is released.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1469,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",switch_prefer_rat_dereg,imc_config.switch_prefer_rat_dereg,OTA and OTA BY OP,no,no,no,no,Trigger IMS de-registration when supported RATs changes.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"steps: IMS registration, change prefer RAT in UI<BR>=> check if UE triggers IMS de-registration retry when prefer RAT is changed",Pass,,,,
1470,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",switch_prefer_rat_dereg.switch_prefer_rat_dereg,imc_config.switch_prefer_rat_dereg.switch_prefer_rat_dereg,Not Support,no,no,no,no,[MCF]Trigger IMS de-registration when supported RATs changes.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1470,7 +1470,7 @@
1477,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ussd_support,imc_config.ussd_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>USSD feature supported or not<BR>0:Not support<BR>1:Support<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not support<BR>1:Support,,,,IMS,IMS,,,"[Init] set ussd_support = 1,IMS Register on 4G,<BR>[Test Step] make ussd operation<BR>[Expected Result] USSD operation success via IMS",Pass,,,,
1478,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ussd_support.ussd_support,imc_config.ussd_support.ussd_support,Not Support,no,no,no,no,[MCF]USSD feature supported or notbit 0:0:Not supportbit 1:1:Support,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1479,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",uuid,imc_config.uuid,Not Support,no,no,no,no,Store UUID<BR>,STRING,16,16,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,,,,,,Untested,,,,
-1480,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_bearer_lost_retain_timer,imc_config.video_bearer_lost_retain_timer,OTA and OTA BY OP,no,no,no,no,Video bearer reserve waiting timer when bearer lost or waiting bearer allocation from NW while 183 session progress. The configuration is useless while setting to 0 (will apply resource_retain_timer)<BR>1000: UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated video bearer. And UE will downgrade to voice call when timer expired.<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1000:UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated video bearer,,,,IMS,IMS,,,"[Init] IMS Register on 4G, make ViWiFi call<BR>[Special condition] NW does not issue a video dedicated bearer on LTE<BR>[Test Step] disable wifi ap to trigger handover<BR>[Expected Result] <BR> with default value (apply resource_retain_timer): call will downgrade to volte after handover to LTE within resource_retain_timer<BR> config to 500ms : call will downgrade to volte after handover to LTE immediately",Untested,,,,
+1480,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_bearer_lost_retain_timer,imc_config.video_bearer_lost_retain_timer,OTA and OTA BY OP,no,no,no,no,Video bearer reserve waiting timer when bearer lost or waiting bearer allocation from NW while 183 session progress. The configuration is useless while setting to 0 (will apply resource_retain_timer)<BR>1000: UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated video bearer. And UE will downgrade to voice call when timer expired.<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1000:UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated video bearer,,,,IMS,IMS,,,"[Init] IMS Register on 4G, make ViWiFi call<BR>[Special condition] NW does not issue a video dedicated bearer on LTE<BR>[Test Step] disable wifi ap to trigger handover<BR>[Expected Result] <BR> with default value (apply resource_retain_timer): call will downgrade to volte after handover to LTE within resource_retain_timer<BR> config to 500ms : call will downgrade to volte after handover to LTE immediately",Pass,,,,
1481,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_dedicated_fallback_support,imc_config.video_dedicated_fallback_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Allow to use existing dedicated EPS bearer to send RTP/RTCP without waiting for NW.<BR>[Related Configuration] This config behavior will align to dedicated_fallback_support when it's disable (video_dedicated_fallback_support=0)<BR>0:Disable<BR>1:NW will allow to use existing dedicated bearer to send Video stream media/RTP.<BR>2:NW will NOT allow to use existing dedicated bearer to send Video stream media/RTP.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:NW will allow to use existing dedicated bearer to send Video stream media<BR>2:NW will NOT allow to use existing dedicated bearer to send Video stream media,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>IMS is registered.<BR>[Test Step]<BR>1. make a ViLTE call.<BR>2. hold call<BR>3. make another ViLTE call<BR>4. NW shoud not issue video dedicated bearer for 2nd call<BR>5. 2nd call should be success.<BR>[Expected Result]<BR>2nd call should be success.,Untested,,,,
1482,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_dedicated_fallback_support.video_dedicated_fallback_support,imc_config.video_dedicated_fallback_support.video_dedicated_fallback_support,Not Support,no,no,no,no,[MCF]Allow to use existing dedicated EPS bearer to send RTP/RTCP without waiting for NWbit 0:0:Disablebit 1:1:NW will allow to use existing dedicated bearer to send Video stream media/RTP.bit 2:2:NW will NOT allow to use existing dedicated bearer to send Video stream media/RTP.,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1483,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_default_fallback_support,imc_config.video_default_fallback_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Allow to use default EPS bearer for video stream.<BR>[Related Configuration] This config behavior will align to default_fallback_support when it's disable (video_default_fallback_support=0)<BR>0:Disable<BR>1:NW will allow to use default bearer to send Video stream media/RTP over default bearer.<BR>2:NW will allow NOT use default bearer to send Video stream media/RTP over default bearer.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:NW will allow to use default bearer to send Video stream media<BR>2:NW will allow NOT use default bearer to send Video stream media,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW does not issue video dedicated bearer for ViLTE Call<BR>[Test Step] make ViLTE call<BR>[Expected Result] <BR> disable: vilte call failed and downgrade to voice call<BR> enable: vilte call success,Pass,,,,
@@ -1511,7 +1511,7 @@
1518,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_h264_pt,ua_config.UA_call_h264_pt,OTA and OTA BY OP,no,no,no,no,The payload type of H264 codec with packetization mode is single NAL mode in RFC 6184. It is dynamic value between 96~127 in SDP attribute.<BR>,UNSIGNED CHAR,1,,,114,NR15.R3.MD700.IVT.MP1MR3.MP,,{96~127},,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Video Call<BR>[Expected Result] The payload type of H264 codec(first fmtp) is as you config. in SDP body of SIP INVITE.,Pass,,,,
1519,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_h264_pt2,ua_config.UA_call_h264_pt2,OTA and OTA BY OP,no,no,no,no,The payload type of H264 codec with packetization mode is non-interleaved mode in RFC 6184. It is dynamic value between 96~127 in SDP attribute.<BR>,UNSIGNED CHAR,1,,,115,NR15.R3.MD700.IVT.MP1MR3.MP,,{96~127},,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Video Call<BR>[Expected Result] The payload type of H264 codec(second fmtp) is as you config. in SDP body of SIP INVITE.,Pass,,,,
1520,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_h265_pt,ua_config.UA_call_h265_pt,OTA and OTA BY OP,no,no,no,no,The payload type of H265 codec with packetization mode is single NAL mode in RFC 7798. It is dynamic value between 96~127 in SDP attribute.<BR>,UNSIGNED CHAR,1,,,101,NR15.R3.MD700.IVT.MP1MR3.MP,,{96~127},,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Video Call<BR>[Expected Result] The payload type of H265 codec(first fmtp) is as you config. in SDP body of SIP INVITE.,Pass,,,,
-1521,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_h265_pt2,ua_config.UA_call_h265_pt2,OTA and OTA BY OP,no,no,no,no,The payload type of H265 codec with packetization mode is non-interleaved mode in RFC 7798. It is dynamic value between 96~127 in SDP attribute.,UNSIGNED CHAR,1,,,102,NR15.R3.MD700.IVT.MP1MR3.MP,,{96~127},,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Video Call<BR>[Expected Result] The payload type of H265 codec(second fmtp) is as you config. in SDP body of SIP INVITE.,Untested,,,,
+1521,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_h265_pt2,ua_config.UA_call_h265_pt2,OTA and OTA BY OP,no,no,no,no,The payload type of H265 codec with packetization mode is non-interleaved mode in RFC 7798. It is dynamic value between 96~127 in SDP attribute.,UNSIGNED CHAR,1,,,102,NR15.R3.MD700.IVT.MP1MR3.MP,,{96~127},,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Video Call<BR>[Expected Result] The payload type of H265 codec(second fmtp) is as you config. in SDP body of SIP INVITE.,Pass,,,,
1522,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_mo_invite_to_bw_cnf_time,ua_config.UA_call_mo_invite_to_bw_cnf_time,OTA and OTA BY OP,no,no,no,no,timeout value of invite to bw_cnf to trigger csfb. <BR>Unit: sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
1523,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_no_resource_code,ua_config.UA_call_no_resource_code,OTA and OTA BY OP,no,no,no,no,"Call response code, different per operator. For MT call, when UE does not have enough resource to make the call, the UE should reject the call by sending a SIP failure response. This configuration is used to set up it.<BR>A SIP response code between 400~ 499<BR>",UNSIGNED SHORT,2,,,480,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] If there is no resource from network, UA will reject the call with this error response",Pass,,,,
1524,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_precondition,ua_config.UA_call_precondition,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>enable/disable precondition<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call or MT call<BR>[Expected Result] If it is set to 1, in MO side, the supported header field will include "precondition" feature tag in outgoing SIP INVITE request; in MT side, the required header field will include "precondition" feature tag in outgoing 18x response or 200 OK response.",Pass,,,,
@@ -1521,7 +1521,7 @@
1528,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_privacy,ua_config.UA_call_privacy,Not Support,no,no,no,no,This is to set the level in SIP Privacy header field if upper layer has the preference according to 3GPP TS 24.629 section 4.5.2.1 when making an outgoing call.<BR>0:None<BR>1:Header<BR>2:Session<BR>3:ID<BR>4:History<BR>5:Critical<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1:Header<BR>2:Session<BR>3:ID<BR>4:History<BR>5:Critical,,,,IMS,IMS,,,,Untested,,,,
1529,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_privacy.UA_call_privacy,ua_config.UA_call_privacy.UA_call_privacy,Not Support,no,no,no,no,[MCF]bit 0:0:Nonebit 1:1:Headerbit 2:2:Sessionbit 3:3:IDbit 4:4:Historybit 5:5:Critical,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1530,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_rej_by_user_code,ua_config.UA_call_rej_by_user_code,OTA and OTA BY OP,no,no,no,no,"Call response code, different per operator. For MT call, when the call is rejected by the end user, the IMS will send a SIP failure response according to this configuration. <BR>A SIP response code between 400~499<BR>",UNSIGNED SHORT,2,,,486,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] If user reject to answer to call, UA will reject the call with this error response[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] If user reject to answer to call, UA will reject the call with this error response",Pass,,,,
-1531,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_rej_code,ua_config.UA_call_rej_code,OTA and OTA BY OP,no,no,no,no,"Call response code, different per operator. For MT call, when the call is rejected by UE internally, IMS will reject the call by sending a SIP failure response. This configuration is used to set up it.<BR>A SIP response code between 400~499",UNSIGNED SHORT,2,,,486,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi. Set to reject all incoming calls from UE.<BR>[Test Step] MO Call<BR>[Expected Result] UA will reject the call with this error response,Untested,,,,
+1531,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_rej_code,ua_config.UA_call_rej_code,OTA and OTA BY OP,no,no,no,no,"Call response code, different per operator. For MT call, when the call is rejected by UE internally, IMS will reject the call by sending a SIP failure response. This configuration is used to set up it.<BR>A SIP response code between 400~499",UNSIGNED SHORT,2,,,486,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi. Set to reject all incoming calls from UE.<BR>[Test Step] MO Call<BR>[Expected Result] UA will reject the call with this error response,Pass,,,,
1532,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_rej_media_code,ua_config.UA_call_rej_media_code,OTA and OTA BY OP,no,no,no,no,"Call response code, different per operator. For MT call, what is the user preferred reject response code before call is established if the SDP offer is not acceptable. <BR>A SIP response code between 400~499<BR>",UNSIGNED SHORT,2,,,488,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
1533,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_session_flag,ua_config.UA_call_session_flag,OTA and OTA BY OP,no,no,no,no,"This is to enable/disable session timer. When this is set to enable, the IMS will bring timer tag in Supported header field of SIP messages. The value of timer is refer to "UA_call_session_timer".<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi. The network suppport the session refresh by UE<BR>[Test Step] Make MO long call<BR>[Expected Result] If this configuration is set to 1, then session-expires and min-se header field will be added to SIP message.",Pass,,,,
1534,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_call_session_flag.UA_call_session_flag,ua_config.UA_call_session_flag.UA_call_session_flag,Not Support,no,no,no,no,[MCF]Enable/disable session timerbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1543,7 +1543,7 @@
1556,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_c_timer,ua_config.UA_reg_c_timer,OTA and OTA BY OP,no,no,no,no,"SIP timer C. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Proxy INVITE transaction timeout. It is used in proxy server, not UE. <BR>unit: ms<BR>",UNSIGNED INT,4,,,180000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,not used in UE<BR>so we don't need to test this item,Untested,,,,
1557,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_d_timer,ua_config.UA_reg_d_timer,OTA and OTA BY OP,no,no,no,no,SIP timer D. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Wait time for response retransmits.<BR>unit: ms<BR>,UNSIGNED INT,4,,,128000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,UT will cover,Untested,,,,
1558,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_e_timer,ua_config.UA_reg_e_timer,OTA and OTA BY OP,no,no,no,no,"SIP timer E. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Non-INVITE request retransmit interval, UDP only.<BR>0: TS24.229 T1 timer<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,[Init] simulate NW didn't reply any response to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check retransmission interval between 1st REGISTER & 2nd REGISTER(aka retransmission),Pass,,,,
-1559,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_f_timer,ua_config.UA_reg_f_timer,OTA and OTA BY OP,no,no,no,no,SIP timer F. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,timer F = 64 * T1<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply REGISTER <BR>[Test Step] IMS registration<BR>[Expected Result] check ELT sip view, the interval between lst REGISTER & last REGISTER won't greater than f timer.",Untested,,,,
+1559,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_f_timer,ua_config.UA_reg_f_timer,OTA and OTA BY OP,no,no,no,no,SIP timer F. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,timer F = 64 * T1<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply REGISTER <BR>[Test Step] IMS registration<BR>[Expected Result] check ELT sip view, the interval between lst REGISTER & last REGISTER won't greater than f timer.",Pass,,,,
1560,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_g_timer,ua_config.UA_reg_g_timer,OTA and OTA BY OP,no,no,no,no,SIP timer G. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>INVITE response retransmit interval<BR>0: TS24.229 T1 timer<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,"[Init] simulate NW didn't reply sip ACK to 200 OK(INVITE)<BR>[Test Step] IMS registration, MT call<BR>[Expected Result] when MT picks up phone, check 200 OK(INVITE) retransmission interval",Pass,,,,
1561,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_h_timer,ua_config.UA_reg_h_timer,OTA and OTA BY OP,no,no,no,no,SIP timer H. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Wait time for ACK receipt<BR>0: 64*T1 (TS24.229 T1 timer)<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,"[Init]Simulate NW to send INVITE via UDP and not to send ACK when receiving 2xx <BR>[Test Step] IMS registration, MT INVITE<BR>[Expected Result] check ELT sip view, the interval between 1st 2xx & last 2xx won't greater than h timer.",Pass,,,,
1562,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_http_digest,ua_config.UA_reg_http_digest,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>IMS regristration autentication mechanisms<BR>0:AKAv1_MD5<BR>1:MD5<BR>2:AKAv2_MD5<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:MD5<BR>2:AKAv2_MD5<BR>0:AKAv1_MD5,,,,IMS,IMS,,,"[Init] UA_reg_http_digest = 0<BR>[Test Step] IMS registration<BR>[Expected Result]check algorithm in Register Contact header <BR>that its AKAv1 , when UA_reg_http_digest changed to 2 <BR>algorithm in Register Contact header is changed to AKAv2",Untested,,,,
@@ -1580,7 +1580,7 @@
1593,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_Force_Use_UDP,ua_config.VoLTE_Setting_SIP_Force_Use_UDP,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Force SIP request to use UDP.<BR>0: disable<BR>1: enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE, enble 1<BR>[Test Step] register volte<BR>[Expected Result] check sip msg register wether use udp to send",Pass,,,,
1594,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_MSS,ua_config.VoLTE_Setting_SIP_TCP_MSS,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>TCP Maximum segment size<BR>,UNSIGNED INT,4,,,1200,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check segment of sip msg register if is smaller 1200,Pass,,,,
1595,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_MTU_Size,ua_config.VoLTE_Setting_SIP_TCP_MTU_Size,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If message length of sip request is larger than this value, UE will use tcp to send the message; otherwise, use UDP.<BR>",UNSIGNED SHORT,2,,,1300,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check sip msg register if use tcp to transmit,Pass,,,,
-1596,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_On_Demand,ua_config.VoLTE_Setting_SIP_TCP_On_Demand,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If this configuration is turned ON, UE will set up a new TCP connection only when there's SIP message to be sent. If P-CSCF disconnects, a new connection is not set up until a new SIP message is being sent. If this configuration is turned OFF, UE will keep TCP connection active at all times. If P-CSCF disconnects, a new connection is set up immediately.<BR>0: disable<BR>1: enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE, enble 1<BR>[Test Step] register volte, move UE from 4G to 2G and return 4G, make a volte call<BR>[Expected Result] check UE if setup tcp connection before sip msg inivte",Untested,,,,
+1596,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_On_Demand,ua_config.VoLTE_Setting_SIP_TCP_On_Demand,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If this configuration is turned ON, UE will set up a new TCP connection only when there's SIP message to be sent. If P-CSCF disconnects, a new connection is not set up until a new SIP message is being sent. If this configuration is turned OFF, UE will keep TCP connection active at all times. If P-CSCF disconnects, a new connection is set up immediately.<BR>0: disable<BR>1: enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE, enble 1<BR>[Test Step] register volte, move UE from 4G to 2G and return 4G, make a volte call<BR>[Expected Result] check UE if setup tcp connection before sip msg inivte",Pass,,,,
1597,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type,ua_config.access_network_info_type,OTA and OTA BY OP,no,no,no,no,"Indicate which access network format is used in P-Access-Network-Info header<BR>b0: Indicate which access network format PANI header uses when IMS is in 3GPP access network. (0:access-type, 1:access-class)<BR>b1: Indicate which access network format PANI header uses when IMS is in NON-3GPP access network. (0:access-type, 1:access-class)<BR>b2: Omit access class character from non-3GPP access type. For example IEEE-802.11n is sent as IEEE-802.11 in P-Access-Network-Info header. <BR>b3-b7: reserved<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b0:Indicate which access network format PANI header uses when IMS is in 3GPP access network<BR>b1:Indicate which access network format PANI header uses when IMS is in NON<BR>b2:Omit access class character from non,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
1598,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type.b1,ua_config.access_network_info_type.b1,Not Support,no,no,no,no,"[MCF]This configuration is bitmask. Bit0 & bit1 indicate which access network format is used in P-Access-Network-Info header. There are two access network format, 1st format is called access-type, and 2nd is called access-class. If access-type is choosen, PANI header will contain access-type parameter, and access-type field could be 3GPP-GERAN/3GPP-UTRAN-FDD/3GPP-UTRAN-TDD/3GPP-E-UTRAN-FDD/3GPP-E-UTRAN-TDD/IEEE-802.11a/IEEE-802.11b/IEEE-802.11g/IEEE-802.11n...etc. If access-class is choosen, PANI header will contain access-class parameter, and access-class field could be 3GPP-GERAN/3GPP-UTRAN/3GPP-E-UTRAN/3GPP-WLAN...etcIndicate which access network format PANI header uses when IMS is in 3GPP access network. (0:access-type, 1:access-class)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
1599,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type.b2,ua_config.access_network_info_type.b2,Not Support,no,no,no,no,"[MCF]This configuration is bitmask. Bit0 & bit1 indicate which access network format is used in P-Access-Network-Info header. There are two access network format, 1st format is called access-type, and 2nd is called access-class. If access-type is choosen, PANI header will contain access-type parameter, and access-type field could be 3GPP-GERAN/3GPP-UTRAN-FDD/3GPP-UTRAN-TDD/3GPP-E-UTRAN-FDD/3GPP-E-UTRAN-TDD/IEEE-802.11a/IEEE-802.11b/IEEE-802.11g/IEEE-802.11n...etc. If access-class is choosen, PANI header will contain access-class parameter, and access-class field could be 3GPP-GERAN/3GPP-UTRAN/3GPP-E-UTRAN/3GPP-WLAN...etcIndicate which access network format PANI header uses when IMS is in NON-3GPP access network. (0:access-type, 1:access-class)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
@@ -1591,7 +1591,7 @@
1604,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",active_state_oos_level.b3,ua_config.active_state_oos_level.b3,Not Support,no,no,no,no,[MCF]reserved,BIT,6,,6,0x3f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,""[Init] IMS Register on 4G, and enable VoLTE.<BR>[Test Step]<BR>1. Make one volte call;<BR>2. Place call to hold and unhold<BR>[Expected Result] <BR> enable: DUT release call immediately when OOS signal is received.<BR> disable: DUT does not release call immediately form OOS signal."",Pass,,,,
1605,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_3gpp_ims_in_Accept,ua_config.add_3gpp_ims_in_Accept,OTA and OTA BY OP,no,no,no,no,3GPP TS 34.229 release 9 GCF test cases request the UE to add application/sdp and appliation/3gpp-ims+xml in the ACCEPT HEADER. But some operators network do not support it.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] If the feature is set to 1, add application/sdp and appliation/3gpp-ims+xml in the ACCEPT HEADER of SIP INVITE",Pass,,,,
1606,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_3gpp_ims_in_Accept.add_3gpp_ims_in_Accept,ua_config.add_3gpp_ims_in_Accept.add_3gpp_ims_in_Accept,Not Support,no,no,no,no,[MCF]TS 34.229 release 9 GCF test cases request the UE to add application/sdp and appliation/3gpp-ims+xml in the ACCEPT HEADER. But some operators network do not support it.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1607,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_audio_video_in_delay_media,ua_config.add_audio_video_in_delay_media,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>add audio SDP when receiving INVITE without SDP.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[INIT]<BR>A, B, C are CMCC VOLTE user. B set call forward when no repy to UE C.<BR>[Test Step]<BR>1. A VOLTE call B, do not answer B<BR>2. NW hangup UE B, UE C receive forwaring call<BR>[Expected Result]<BR>Enable: UE C response 183 with auido and video media line.<BR>Disable: UE C response 183 with only with auido media line.",Untested,,,,
+1607,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_audio_video_in_delay_media,ua_config.add_audio_video_in_delay_media,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>add audio SDP when receiving INVITE without SDP.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[INIT]<BR>A, B, C are CMCC VOLTE user. B set call forward when no repy to UE C.<BR>[Test Step]<BR>1. A VOLTE call B, do not answer B<BR>2. NW hangup UE B, UE C receive forwaring call<BR>[Expected Result]<BR>Enable: UE C response 183 with auido and video media line.<BR>Disable: UE C response 183 with only with auido media line.",Pass,,,,
1608,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_audio_video_in_delay_media.add_audio_video_in_delay_media,ua_config.add_audio_video_in_delay_media.add_audio_video_in_delay_media,Not Support,no,no,no,no,[MCF]add audio SDP when receiving INVITE without SDP.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1609,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cell_info_age_to_cni,ua_config.add_cell_info_age_to_cni,OTA and OTA BY OP,no,no,no,no,"If enabled, adds cell-info-age tag into Cellular-Network-Info header<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init] UE in WiFi, VoLTE disabled<BR>[Test Step] Enabled VoLTE and observer REGISTER message Cellular-Network-Info header<BR>[Expected Result] <BR>Enabled: Age tag is included in Cellular-Network-Info header.<BR>Disabled: Age tag is not included.",Pass,,,,
1610,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cell_info_age_to_cni.add_cell_info_age_to_cni,ua_config.add_cell_info_age_to_cni.add_cell_info_age_to_cni,Not Support,no,no,no,no,"[MCF]If enabled, adds cell-info-age tag into Cellular-Network-Info headerbit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1699,7 +1699,7 @@
1712,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_mo_pidf_usage.b5,ua_config.call_mo_pidf_usage.b5,Not Support,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO calls. Bit 0 means enabled, bit 1 disabled.reserved",BIT,4,,4,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Modify the setting.<BR>Make MO IMS calls, the pidf document in added whenever selected by setting. This can be checked from the SIP messages.<BR>Note! the location information is sensitive information, so this might be hidded in normal logs, so you might need to test this against some test machine to see all the infromation.",Pass,,,,
1713,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_normal_clear_timer_timeout,ua_config.call_normal_clear_timer_timeout,OTA and OTA BY OP,no,no,no,no,"If the value is greater than 0, UE starts timer to wait BYE's final response. <BR>unit: sec<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init]<BR>Anite Test Case<BR>[Test Step]<BR>Anite TC-MF_VoLTE-11003<BR>[Expected Result]<BR>Case pass,Pass,,,,
1714,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_pull_sub_expire,ua_config.call_pull_sub_expire,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Timer for sending SUBSCRIBE for call pull. <BR>unit: sec<BR>,UNSIGNED INT,4,,,7200,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Deprecated,Untested,,,,
-1715,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_refreshcall_timer_expire,ua_config.call_refreshcall_timer_expire,OTA and OTA BY OP,no,no,no,no,"This is to set the timer that send SIP BYE request before. This configuration is used to set the time period in seconds. If the timer is set to 5 seconds, the IMS will send SIP BYE request to terminate the call before session timer is timeout.<BR>recommand to set to 0<BR>unit: sec<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make a MO long call and the network does not send reINVITE request for session refresh<BR>[Expected Result] The UE will send SIP BYE request to terminate the call before session timer is timeout. This configuration is used to set up the timer.,Untested,,,,
+1715,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_refreshcall_timer_expire,ua_config.call_refreshcall_timer_expire,OTA and OTA BY OP,no,no,no,no,"This is to set the timer that send SIP BYE request before. This configuration is used to set the time period in seconds. If the timer is set to 5 seconds, the IMS will send SIP BYE request to terminate the call before session timer is timeout.<BR>recommand to set to 0<BR>unit: sec<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make a MO long call and the network does not send reINVITE request for session refresh<BR>[Expected Result] The UE will send SIP BYE request to terminate the call before session timer is timeout. This configuration is used to set up the timer.,Pass,,,,
1716,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_rel_holdcall_in_midcall_SRVCC,ua_config.call_rel_holdcall_in_midcall_SRVCC,OTA and OTA BY OP,no,no,no,no,Some operators request to release hold call when there is a SRVCC happened for active call and a hold call. UE will releae the hold call if the flag is set to 1.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE. The network has support mid-call srvcc feature tag in SIP messages.<BR>[Test Step] make a MO call and then hold call. Go to a SRVCC area.<BR>[Expected Result] The UE terminate the hold call if this configruation is set to 1.,Pass,,,,
1717,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_rel_holdcall_in_midcall_SRVCC.call_rel_holdcall_in_midcall_SRVCC,ua_config.call_rel_holdcall_in_midcall_SRVCC.call_rel_holdcall_in_midcall_SRVCC,Not Support,no,no,no,no,[MCF]Some operators request to release hold call when there is a SRVCC happened for active call and a hold call. UE will releae the hold call if the flag is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1718,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_ringback_timer_timeout,ua_config.call_ringback_timer_timeout,OTA and OTA BY OP,no,no,no,no,This is a timer in MO side. It starts when the MO UE receives 180 ringing from MT UE and starts to play ring-back tone. The UE will not start the timer when the configuration is set to 0. <BR>recommand to set to 0<BR>unit: sec<BR>,UNSIGNED SHORT,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make MO call and then MT side do not accept the call<BR>[Expected Result] the call will goes to terminate after the configured time is timeout,Pass,,,,
@@ -1744,7 +1744,7 @@
1757,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conference_desub_time,ua_config.conference_desub_time,OTA and OTA BY OP,no,no,no,no,"Time that UE waits de-subscription from conference event package after conference call is terminated. If the NOTIFY is not received when timer expires, the UE will send SUBSCRIBE to de-subcribe the conference package.Specifications: TS 24.147 subclause 5.3.1.6.1 and RFC 4575<BR>range:0-255<BR>unit: sec<BR>",UNSIGNED CHAR,1,,,30,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"- Special test cases where no NOTIFY is sent to the UE after the conference call is ended.<BR>Configure the timer to desired value, check that after the timeout the UE will send de-SUBSCRIBE for conference-event.",Pass,,,,
1758,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conference_subscribe_timing,ua_config.conference_subscribe_timing,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>SIP SUBSCRIBE request is sent after all calls are merged, however some operators require to send SIP SUBSCRIBE request right after conference call is established with conference focus server. If this is set to 1, then SIP SUBSCRIBE request is sent right after conference call is established with the conference focus server.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] After two calls are merged, the SIP SUBSCRIBE request is sent if this configuration is set to 0. After the call to conference focus server is established, the SIP SUBSCRIBE request is sent if the configuration is set to 1.",Pass,,,,
1759,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conference_subscribe_timing.conference_subscribe_timing,ua_config.conference_subscribe_timing.conference_subscribe_timing,Not Support,no,no,no,no,"[MCF]In test cases of TS 34.229, SUBSCRIBE request is sent after all calls are merged, however some operators require to send SUBSCRIBE right after conference call is established with conference focus server.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1760,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_wildcard_dereg,ua_config.contact_wildcard_dereg,OTA and OTA BY OP,no,no,no,no,Indicate if de-REGISTER uses wildcard in Contact header<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] Volte Network supports wildcard in contact header<BR>[Test Step] Let the DUT DeRegister<BR>[Expected Result] <BR> enable: deREGISTER SIP Message with wildchar in contact header<BR> disable: regular deREGISTER SIP message observed,Untested,,,,
+1760,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_wildcard_dereg,ua_config.contact_wildcard_dereg,OTA and OTA BY OP,no,no,no,no,Indicate if de-REGISTER uses wildcard in Contact header<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] Volte Network supports wildcard in contact header<BR>[Test Step] Let the DUT DeRegister<BR>[Expected Result] <BR> enable: deREGISTER SIP Message with wildchar in contact header<BR> disable: regular deREGISTER SIP message observed,Pass,,,,
1761,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_wildcard_dereg.contact_wildcard_dereg,ua_config.contact_wildcard_dereg.contact_wildcard_dereg,Not Support,no,no,no,no,[MCF]Indicate if de-REGISTER uses wildcard in Contact headerbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1762,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_accesstype,ua_config.contact_with_accesstype,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Contact header contains +g.3gpp.accesstype<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if REGISTER Contact header contains +g.3gpp.accesstype,Pass,,,,
1763,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_accesstype.contact_with_accesstype,ua_config.contact_with_accesstype.contact_with_accesstype,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Contact header contains +g.3gpp.accesstypebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1834,7 +1834,7 @@
1847,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_without_target_hold.ect_without_target_hold,ua_config.ect_without_target_hold.ect_without_target_hold,Not Support,no,no,no,no,[MCF]bit 0:0:ECT transferor set transfer target on hold before sending REFER to transfereebit 1:1:ECT transferor does not set transfer target on hold before sending REFER to transferee,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1848,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emc_call_ringback_timer_timeout,ua_config.emc_call_ringback_timer_timeout,OTA and OTA BY OP,no,no,no,no,Ringback timer for emergency<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register on 4G and NW support IMS emergency call<BR>[Test Step] make 911 emergency volte call<BR>[Expected Result] UE can wait final response of NW for time period in ringing state<BR> 0: no special timer function for emergency call<BR> other value: start special timer for emergency call for Ringback timer,Pass,,,,
1849,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emc_cits_protect_timer,ua_config.emc_cits_protect_timer,OTA and OTA BY OP,no,no,no,no,"Set the INVITE Client transaction alive time, if no response received for E911 call. <BR>unit: sec<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] Power on<BR>[Test Step] <BR>1.UE make a E911 call<BR>2.NW don't respond UE after 180 ringing<BR>[Expected Result]<BR>UE will keep the emergency call emc_cits_protect_timer seconds(if emc_cits_protect_timer is 0, it will keepp 5 minutes)",Pass,,,,
-1850,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_use_imsi,ua_config.emergency_use_imsi,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if emergency registration uses IMSI-based URI<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiF ;<BR>2.start a emergency call;<BR>[Expected Result] <BR>emergency registration uses IMSI-based URI.,Untested,,,,
+1850,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_use_imsi,ua_config.emergency_use_imsi,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if emergency registration uses IMSI-based URI<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiF ;<BR>2.start a emergency call;<BR>[Expected Result] <BR>emergency registration uses IMSI-based URI.,Pass,,,,
1851,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_use_imsi.emergency_use_imsi,ua_config.emergency_use_imsi.emergency_use_imsi,Not Support,no,no,no,no,[MCF]Indicate if emergency registration uses IMSI-based URIbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1852,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ems_mode_ind,ua_config.ems_mode_ind,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if IMS reports emergency call preference<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,internal used,Untested,,,,
1853,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ems_mode_ind.ems_mode_ind,ua_config.ems_mode_ind.ems_mode_ind,Not Support,no,no,no,no,[MCF]Indicate if IMS reports emergency call preferencebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1842,7 +1842,7 @@
1855,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_in_band_tone_in_hold.enable_in_band_tone_in_hold,ua_config.enable_in_band_tone_in_hold.enable_in_band_tone_in_hold,Not Support,no,no,no,no,[MCF]Enable in-band tone in hold. If network does not use P-Early-Media header correctly this prevents double hold tone scenario.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1856,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",err_handling_for_video_via_update,ua_config.err_handling_for_video_via_update,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>UE send error response for remote UPDATE in which includes video media descriptions in ACTIVE state.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step] Run FT Cases<BR>[Expected Result]<BR> Enable: UE cannot handle UPDATE with video actions (upgrade, downgrade, etc).<BR> Disable: UE can handle UPDATE with video actions (upgrade, downgrade, etc)",Pass,,,,
1857,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",err_handling_for_video_via_update.err_handling_for_video_via_update,ua_config.err_handling_for_video_via_update.err_handling_for_video_via_update,Not Support,no,no,no,no,[MCF]UE send error response for remote UPDATE in which includes video media descriptions.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1858,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",esipcpi_full_reason,ua_config.esipcpi_full_reason,OTA and OTA BY OP,no,no,no,no,"Config reason_text parameter of +ESIPCPI URC, use whole reason line or not.<BR>0: (default) Disable.<BR>1: Enable.",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:(default) Disable<BR>1:Enable,,,,IMS,IMS,,,"[INIT]<BR>[Test Step]<BR>MO call, NW set SIP message with reason header <BR>[Expected Result]<BR>+ESIPCPI have full reason informaiton report to AP",Untested,,,,
+1858,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",esipcpi_full_reason,ua_config.esipcpi_full_reason,OTA and OTA BY OP,no,no,no,no,"Config reason_text parameter of +ESIPCPI URC, use whole reason line or not.<BR>0: (default) Disable.<BR>1: Enable.",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:(default) Disable<BR>1:Enable,,,,IMS,IMS,,,"[INIT]<BR>[Test Step]<BR>MO call, NW set SIP message with reason header <BR>[Expected Result]<BR>+ESIPCPI have full reason informaiton report to AP",Pass,,,,
1859,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",esipcpi_full_reason.esipcpi_full_reason,ua_config.esipcpi_full_reason.esipcpi_full_reason,Not Support,no,no,no,no,[MCF]Report full sip reason line in URC +ESIPCPIbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1860,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",evs_configuration_profile,ua_config.evs_configuration_profile,OTA and OTA BY OP,no,no,no,no,EVS offer/answer logic from IR92 V11. Value of the first configuration to be used in offer<BR>0:EVS Configuration A1: br=5.9-13.2; bw=nb-swb.<BR>1:EVS Configuration A2: br=5.9-24.4; bw=nb-swb.<BR>2:EVS Configuration B0: br=13.2; bw=swb.<BR>3:EVS Configuration B1: br=9.6-13.2; bw=swb.<BR>4:EVS Configuration B2: br=9.6-24.4; bw=swb.<BR>255:None<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:EVS Configuration A1<BR>1:EVS Configuration A2<BR>2:EVS Configuration B0<BR>3:EVS Configuration B1<BR>4:EVS Configuration B2<BR>255,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi. evs_configuration_profile configuration is used<BR>[Test Step] MO call<BR>[Expected Result] Call succesfull and correct evs profile is used at initial SDP offer",Pass,,,,
1861,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",evs_configuration_profile.evs_configuration_profile,ua_config.evs_configuration_profile.evs_configuration_profile,Not Support,no,no,no,no,[MCF]bit 0:0:EVS Configuration A1: br=5.9-13.2; bw=nb-swb.bit 1:1:EVS Configuration A2: br=5.9-24.4; bw=nb-swb.bit 2:2:EVS Configuration B0: br=13.2; bw=swb.bit 3:3:EVS Configuration B1: br=9.6-13.2; bw=swb.bit 4:4:EVS Configuration B2: br=9.6-24.4; bw=swb.bit 255:255:None,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1942,7 +1942,7 @@
1956,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg.b3,ua_config.not_auto_reg.b3,Not Support,no,no,no,no,[MCF]Not auto triggering IMS registration while receiving the SIP error cause (defined by bitmask)Reserved,BIT,30,,30,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] LTE register on 4G, VoLTE OFF<BR>[Test Step] Enabled VoLTE and send 500 SIP response to register.<BR>[Expected Result]<BR> Enable: UE does not trigger new IMS registration automatically. For example VoLTE off/on is needed.<BR> Disable: UE does IMS registration again after configred auto reg timer.",Untested,,,,
1957,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg_403,ua_config.not_auto_reg_403,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE stops registration retry (until power cycled or enter/leave filght mode) when NW replies 403 response for REGISTER<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable for all<BR>2:Enable for VPLMN only,,,,IMS,IMS,,,prerequiste: simulate NW to reply 403 to REGISTER<BR>steps: IMS registration<BR>=> check if IMS stop registration attempt,Pass,,,,
1958,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg_403.not_auto_reg_403,ua_config.not_auto_reg_403.not_auto_reg_403,Not Support,no,no,no,no,[MCF]If UE stops registration retry (until power cycled or enter/leave filght mode) when NW replies 403 response for REGISTERbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1959,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",notify_sms_notify_done,ua_config.notify_sms_notify_done,OTA and OTA BY OP,no,no,no,no,Indicate if SMS retry will be postponed until NOTIFY flow is done<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[init] ims register <BR>[Test Step] while registering send sms <BR>[Expected Result] check if the value enabled , then SMS retry will be postponed until NOTIFY flow is done",Untested,,,,
+1959,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",notify_sms_notify_done,ua_config.notify_sms_notify_done,OTA and OTA BY OP,no,no,no,no,Indicate if SMS retry will be postponed until NOTIFY flow is done<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[init] ims register <BR>[Test Step] while registering send sms <BR>[Expected Result] check if the value enabled , then SMS retry will be postponed until NOTIFY flow is done",Pass,,,,
1960,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",notify_sms_notify_done.notify_sms_notify_done,ua_config.notify_sms_notify_done.notify_sms_notify_done,Not Support,no,no,no,no,[MCF]Indicate if SMS retry will be postponed until NOTIFY flow is donebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1961,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nsn_specific,ua_config.nsn_specific,Not Support,no,yes,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>NSN network request the UE to set 100rel in Supported header field and +g.3gpp.smsip in Accept-Contact Header and P-Preferred-Identity in the SIP MESSAGE Request. The request is added while SMS sending if this configuraiton is enabled.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE. <BR>[Test Step] make a MO SMS<BR>[Expected Result] If configuration is set to 1, the UE will set 100rel in Supported header field and +g.3gpp.smsip in Accept-Contact Header and P-Preferred-Identity in the SIP MESSAGE Request.",Untested,,,,
1962,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oir_privacy_to_header,ua_config.oir_privacy_to_header,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From 3GPP TS 24.607, the UE supports OIR (originator Identification Restriction) temporary mode activation by adding Privacy header field. But the specification says the UE can use 'header' or 'id' in the header field. The UE will use 'header' when this configuration is set to 1; and use 'id' when this configuration is set to 0.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi.<BR>[Test Step] Make a call with OIR (originator Identification Restriction) temporary mode<BR>[Expected Result] If the configuration is set to 1, "Privacy: header" will be added to SIP INVITE request. If the configuration is set to 0, "Privacy: id" will be added to SIP INVITE request",Pass,,,,
@@ -1950,7 +1950,7 @@
1964,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_err_rsp_for_prack,ua_config.omit_err_rsp_for_prack,Not Support,no,no,no,no,When enabled PRACK request error response is omitted and call continue normally as if the error response is not received<BR>In some cases enabling this can increase call drop rate<BR>0: PRACK error response is handled and lead to IMS call clearing<BR>1: PRACK error response is omitted<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:PRACK error response is handled and lead to IMS call clearing<BR>1:PRACK error response is omitted,,,,IMS,IMS,,,"[Init] IMS Register on 4G, and enable VoLTE. Test equipment must send 100rel in require header for VoLTE call.<BR>[Test Step]<BR>1. Make one VoLTE call.<BR>2. Make network simulator to send error response to PRACK<BR>[Expected Result] <BR>Setting value 0: Prack error response from network lead to call drop.<BR>Setting value 1: Prack error response is omitted and call creation continue normally."",Pass,,,,
1965,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_method_invite_in_refer_to,ua_config.omit_method_invite_in_refer_to,OTA and OTA BY OP,no,no,no,no,"Refer-To: header , whether to omit the ;method=INVITE paramter in Refer-To: header URI. The ;method=INVITE is optional. However, some networks might expect it. Enabling this will make the URI little bit shorter, and therefore might be preferred by some operators.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"Add a member to IMS conference call.<BR>If the flag is set the Refer-To header includes ;method=INVITE<BR>If the flag is not set the Refer-To heder does not indluce ;method=INVITE.<BR>Both are legal, but typically we add ;method=INVITE.",Pass,,,,
1966,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_method_invite_in_refer_to.omit_method_invite_in_refer_to,ua_config.omit_method_invite_in_refer_to.omit_method_invite_in_refer_to,Not Support,no,no,no,no,"[MCF]Refer-To: header , whether to omit the ;method=INVITE paramter in Refer-To: header URI.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1967,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_end_reset_tcp_client,ua_config.oos_end_reset_tcp_client,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Reset TCP client ports after OOS end has been received and re-registration after OOS is enabled.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE, VoLTE enabled<BR>[Test Step] UE go to RF shielded box or simialr and MD go to OOS. Return back to service.<BR>[Expected Result] <BR>Enabled: TCP connection reset and reconnect is done for IMS client socket before IMS re-register is sent to network<BR>Disabled: re-register is sent without TCP connection reset.",Untested,,,,
+1967,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_end_reset_tcp_client,ua_config.oos_end_reset_tcp_client,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Reset TCP client ports after OOS end has been received and re-registration after OOS is enabled.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE, VoLTE enabled<BR>[Test Step] UE go to RF shielded box or simialr and MD go to OOS. Return back to service.<BR>[Expected Result] <BR>Enabled: TCP connection reset and reconnect is done for IMS client socket before IMS re-register is sent to network<BR>Disabled: re-register is sent without TCP connection reset.",Pass,,,,
1968,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_end_reset_tcp_client.oos_end_reset_tcp_client,ua_config.oos_end_reset_tcp_client.oos_end_reset_tcp_client,Not Support,no,no,no,no,[MCF]Reset TCP client ports after OOS end has been received and re-registration after OOS is enabled.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1969,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",open_pcscf_retry_count_limit,ua_config.open_pcscf_retry_count_limit,OTA and OTA BY OP,no,no,no,no,0:disable<BR>1:enable<BR>Used to enable PCSCF retry festure about some IMS REG fail scenario(Not auto re reg and pcscf all fail).<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,prerequiste: simulate NW to reply error response(e.g 404) to REGISTER<BR>steps: IMS registration<BR>=> check if UE attempt to retry IMS registration,Pass,,,,
1970,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",open_pcscf_retry_count_limit.open_pcscf_retry_count_limit,ua_config.open_pcscf_retry_count_limit.open_pcscf_retry_count_limit,Not Support,no,no,no,no,[MCF]Used to enable PCSCF retry festure about some IMS REG fail scenario(Not auto re reg and pcscf all fail).bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
@@ -1986,7 +1986,7 @@
2000,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",refer_dialog_to_server,ua_config.refer_dialog_to_server,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>When inviting other users to a conference according to section 5.3.1.5.3 of 3GPP TS 24.147, the UE set the request URI of the REFER request to the address of the user who is invited to the conference. The UE must send the REFER method by using the existing dialog (in-dialog), but some operators request to create new dialog. The UE send the REFER with the existing dialog from conference creation when this configuration is set to 1.<BR>0:out-of-dialog<BR>1:in-dialog<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:out<BR>1:in,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] After making call to the conference focus server, UA will send SIP REFER request to invite the two participants to join the call. The SIP REFER request is using the dialog to server if the configuration is set to 1",Pass,,,,
2001,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",refer_dialog_to_server.refer_dialog_to_server,ua_config.refer_dialog_to_server.refer_dialog_to_server,Not Support,no,no,no,no,"[MCF]When inviting other users to a conference according to section 5.3.1.5.3 of 3GPP TS 24.147, the UE set the request URI of the REFER request to the address of the user who is invited to the conference. The UE must send the REFER method by using the existing dialog (in-dialog), but some operators request to create new dialog. The UE send the REFER with the existing dialog from conference creation when this configuration is set to 1.bit 0:0:out-of-dialogbit 1:1:in-dialog",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2002,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_add_content_disposition,ua_config.reg_add_content_disposition,Not Support,no,no,no,no,Adds Content-Dispostion header when pidf document is added to REGISTER request<BR>0: Does not use Content-Disposition header<BR>1: Adds Content-Dispostion header when pidf document is added to REGISTER request<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Does not use Content<BR>1:Adds Content,,,no dependency,IMS,IMS,,,[Init] VoLTE or VoWiFi enabled SIM<BR>[Test Step] IMS registration<BR>[Expected Result] If enabled Content-Disposition header is used when pidf document is added to REGISTER request,Untested,,,,
-2003,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_after_nw_dereg_60s,ua_config.reg_after_nw_dereg_60s,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate how long IMS should wait for to trigger new registration after NW-init de-registration. <BR>unit: sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] ims register<BR>[Test steps] nw initiate a de-reg by NOTIFY<BR>[Expected Result] if enabled UE will wait for the interval before new Reg .<BR>If the value is 60 sec , UE will wait 60 sec",Untested,,,,
+2003,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_after_nw_dereg_60s,ua_config.reg_after_nw_dereg_60s,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate how long IMS should wait for to trigger new registration after NW-init de-registration. <BR>unit: sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] ims register<BR>[Test steps] nw initiate a de-reg by NOTIFY<BR>[Expected Result] if enabled UE will wait for the interval before new Reg .<BR>If the value is 60 sec , UE will wait 60 sec",Pass,,,,
2004,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_check_reason_header,ua_config.reg_check_reason_header,OTA and OTA BY OP,no,no,no,no,"When enabled, UE checks the reason header in SIP registration failure response.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Registration failure<BR>[Test Step] IMS registration fails with 403 and Reason header is provided<BR>[Expected Result] When enabled UE checks Reason header and determines if new registration attempt is allowed at current location<BR>",Pass,,,,
2005,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_check_reason_header.reg_check_reason_header,ua_config.reg_check_reason_header.reg_check_reason_header,Not Support,no,no,no,no,"[MCF]When enabled, UE checks the reason header in SIP registration failure response.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2006,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_disable_pidf,ua_config.reg_disable_pidf,Not Support,no,no,no,no,"Bit mask whether to add pidf/location in different REGISTER messages. Bit 0 means enabled, bit 1 disabled.<BR>Location information is considered sensitive information, so this configuration is subject to local legistlation. Specifications: TS 24.229 clause 5.1.6 and RFC 4119<BR>b0: WFC emergency (default 0)<BR>b1: WFC normal (default 0)<BR>b2: VoLTE emergency (default 1)<BR>b3: VoLTE normal (default 1)<BR>b4-b7: reserved<BR>",UNSIGNED CHAR,1,,,0x0C,NR15.R3.MD700.IVT.MP1MR3.MP,,b2:VoLTE emergency (default 1)<BR>b3:VoLTE normal (default 1)<BR>b0:WFC emergency (default 0)<BR>b1:WFC normal (default 0),,,,IMS,IMS,,,[Init] 4G/WiFi attached and VoLTE/WFC disabled. <BR>[Test Step]<BR>1. Enable VoLTE<BR>2. Enable vowifi<BR>3. Make emergency call over VoLTE<BR>4. Make emergency call over WFC<BR>[Expected Result] <BR> Setting value disabled(1): UE does not add PIDF document in REGISTER<BR>Setting value enabled(0): UE add PIDF document in REGISTER",Untested,,,,
@@ -1995,7 +1995,7 @@
2009,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_fail_not_need_remove_binding.reg_fail_not_need_remove_binding,ua_config.reg_fail_not_need_remove_binding.reg_fail_not_need_remove_binding,Not Support,no,no,no,no,[MCF]Indicate if IMS should send de-REGISTER when registration got error responsebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2010,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_gruu_support,ua_config.reg_gruu_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if Supported header contains gruu<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] ims register and make call<BR>[Test steps] enable and check the supported header<BR>[Expected Result] if enabled UE will add gruu in supported header,Pass,,,,
2011,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_gruu_support.reg_gruu_support,ua_config.reg_gruu_support.reg_gruu_support,Not Support,no,no,no,no,[MCF]Indicate if Supported header contains gruubit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2012,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_over_tcp,ua_config.reg_over_tcp,OTA and OTA BY OP,no,no,no,no,Force UE to send SIP REGISTER by TCP<BR>0:default UE behavior<BR>1:Force to use TCP connection<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:default UE behavior<BR>1:Force to use TCP connection,,,,IMS,IMS,,,"(1) Use non-IPSEC operator SIM. e,g, APTG, Verizon<BR>(2) set reg_over_tcp to 1, and check whether init REGISTER over TCP",Untested,,,,
+2012,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_over_tcp,ua_config.reg_over_tcp,OTA and OTA BY OP,no,no,no,no,Force UE to send SIP REGISTER by TCP<BR>0:default UE behavior<BR>1:Force to use TCP connection<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:default UE behavior<BR>1:Force to use TCP connection,,,,IMS,IMS,,,"(1) Use non-IPSEC operator SIM. e,g, APTG, Verizon<BR>(2) set reg_over_tcp to 1, and check whether init REGISTER over TCP",Pass,,,,
2013,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_over_tcp.reg_over_tcp,ua_config.reg_over_tcp.reg_over_tcp,Not Support,no,no,no,no,[MCF]Force UE to send SIP REGISTER by TCPbit 0:0:default UE behaviorbit 1:1:Force to use TCP connection,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2014,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_restore_try_next_pcscf,ua_config.reg_restore_try_next_pcscf,OTA and OTA BY OP,no,no,no,no,This parameter is related to "timer_b_restore_reg". It is used to defined which pcscf server will be tried.<BR>0:try the same PCSCF<BR>1:try next PCSCF<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:try the same PCSCF<BR>1:try next PCSCF,,,,IMS,IMS,,,"[Init] IMS register on 4G or WiFi<BR>[Test Step] MO call<BR>[Expected Result]<BR>If the SIP INVITE cannot be sent out because SIP Timer B expires or fatal error, UA will try the next PCSCF address if the parameter is set to 1",Pass,,,,
2015,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_restore_try_next_pcscf.reg_restore_try_next_pcscf,ua_config.reg_restore_try_next_pcscf.reg_restore_try_next_pcscf,Not Support,no,no,no,no,[MCF]This parameter is related to timer_b_restore_reg. It is used to defined which pcscf server will be tried.bit 0:0:try the same PCSCFbit 1:1:try next PCSCF,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
@@ -2040,11 +2040,11 @@
2054,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_in_rat_change.rereg_in_rat_change,ua_config.rereg_in_rat_change.rereg_in_rat_change,Not Support,no,no,no,no,[MCF]Indicate if re-registration should be triggered when UE moves from 4G to 2/3G.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2055,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resp_precondition_without_bw_cnf,ua_config.resp_precondition_without_bw_cnf,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>When MT UE receives UPDATE request for updating precondition status, UE will reply 200 OK for UPDATE indicate local precondition status to peer immediately without waiting the networks finished allocating dedicated bear if this flag is set to be enabled.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Reference CMCC NS-IOT 2.0 case 5.4.4<BR>[Init]<BR>CMCC NS-IOT 2.0 test package on simulater<BR>[Test Step]<BR>Execute case 5.4.4<BR>[Expect Result]<BR>1. Enable: case pass<BR>2. Disable: case failed,Pass,,,,
2056,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resp_precondition_without_bw_cnf.resp_precondition_without_bw_cnf,ua_config.resp_precondition_without_bw_cnf.resp_precondition_without_bw_cnf,Not Support,no,no,no,no,"[MCF]When MT UE receives UPDATE request for precondition, reply 200 OK to peer.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2057,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",restore_in_3gpp_abnormal,ua_config.restore_in_3gpp_abnormal,OTA and OTA BY OP,no,no,no,no,This is to enable 3GPP TS 24.229 5.1.2A.1.6 Abnormal cases for non-REGISTER method while making MO SMS and receiving the response.<BR>0:Disable<BR>1:Enable,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make MO call and then disable VOLTE or enter to flight mode.<BR>[Expected Result] If this configuration is set to 1, then the UE will send SIP BYE request for the MO call.",Untested,,,,
+2057,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",restore_in_3gpp_abnormal,ua_config.restore_in_3gpp_abnormal,OTA and OTA BY OP,no,no,no,no,This is to enable 3GPP TS 24.229 5.1.2A.1.6 Abnormal cases for non-REGISTER method while making MO SMS and receiving the response.<BR>0:Disable<BR>1:Enable,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make MO call and then disable VOLTE or enter to flight mode.<BR>[Expected Result] If this configuration is set to 1, then the UE will send SIP BYE request for the MO call.",Pass,,,,
2058,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",restore_in_3gpp_abnormal.restore_in_3gpp_abnormal,ua_config.restore_in_3gpp_abnormal.restore_in_3gpp_abnormal,Not Support,no,no,no,no,[MCF]3GPP TS 24.229 5.1.2A.1.6 Abnormal cases for non-REGISTER methodbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2059,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resub_23g4,ua_config.resub_23g4,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if re-subscribe should be triggered when UE moves from 2/3G to 4G<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,ua_config.support_resub=1,IMS,IMS,,,"phased out, so can't test",Pass,,,,
2060,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resub_23g4.resub_23g4,ua_config.resub_23g4.resub_23g4,Not Support,no,no,no,no,[MCF]Indicate if re-subscribe should be triggered when UE moves from 2/3G to 4Gbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2061,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_interval_after_403,ua_config.retry_interval_after_403,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate how long IMS should wait for to trigger new registration if current REGISTER received 403. <BR>unit: sec<BR>,INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to val(>0)<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi;<BR>2.start IMS registration in LTE or VoWIFI;<BR>3.received the 403 for registration from NW;<BR>[Expected Result] <BR>IMS should wait val sec for triggering new registration if current REGISTER received 403.,Untested,,,,
+2061,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_interval_after_403,ua_config.retry_interval_after_403,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate how long IMS should wait for to trigger new registration if current REGISTER received 403. <BR>unit: sec<BR>,INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to val(>0)<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi;<BR>2.start IMS registration in LTE or VoWIFI;<BR>3.received the 403 for registration from NW;<BR>[Expected Result] <BR>IMS should wait val sec for triggering new registration if current REGISTER received 403.,Pass,,,,
2062,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reuse_transport_methods,ua_config.reuse_transport_methods,OTA and OTA BY OP,no,no,no,no,"Bitmask containing a list of SIP requests which should use the same transport protocol as the request used to establish an (early) dialog, regarless of the size of the request.<BR>b1: INVITE<BR>b2: REFER<BR>b3: UPDATE<BR>b4: CANCEL<BR>b6: ACK<BR>b7: BYE<BR>b9: SUBSCRIBE<BR>b13: PRACK<BR>",UNSIGNED INT,4,,,0x00000050,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:INVITE<BR>b2:REFER<BR>b3:UPDATE<BR>b4:CANCEL<BR>b6:ACK<BR>b7:BYE<BR>b9:SUBSCRIBE<BR>b13:PRACK,,,,IMS,IMS,,,[Init] IMS register on 4G<BR>[Test Step] Set on an MO call.<BR>[Expected Result]<BR>Call setup succeeds.,Pass,,,,
2063,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ringing_state_oos_level,ua_config.ringing_state_oos_level,OTA and OTA BY OP,no,no,no,no,Release ringing state call immediately when receive Out-Of-Service signal from modem.<BR>0:No specific handling<BR>1:Release ringing state MO/MT call when enter OOS<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:No specific handling<BR>1:Release ringing state MO,,,,IMS,IMS,,,""[Init] IMS Register on 4G, and enable VoLTE<BR>[Test Step]<BR>1. Make one volte call;<BR>2. Put DUT phone in Shielding box, after 3min, move out<BR>3. Check the remote phone and DUT phone;<BR>[Expected Result] <BR> enable: The remote phone call should be auto end also after the DUT phone removed out from sheilding box.<BR> disable: The remote phone call still continues while DUT phone call auto ends in step 3."",Pass,,,,
2064,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ringing_state_oos_level.ringing_state_oos_level,ua_config.ringing_state_oos_level.ringing_state_oos_level,Not Support,no,no,no,no,[MCF]bit 0:0:No specific handlingbit 1:1:Release ringing state MO/MT call when enter OOS,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -2111,7 +2111,7 @@
2125,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_des_strength_optional.set_des_strength_optional,ua_config.set_des_strength_optional.set_des_strength_optional,Not Support,no,no,no,no,[MCF]Set local des value to optional in initial SDP offer(a=des:qos optional local sendrecv).bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2126,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_homeuri_from_pau,ua_config.set_homeuri_from_pau,OTA and OTA BY OP,no,no,no,no,Copy the home uri from 200 OK REGISTER PAU-header.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] If feature is enabled home URI is generated from P-Associated-URI from REGISTER 200/OK response",Pass,,,,
2127,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_homeuri_from_pau.set_homeuri_from_pau,ua_config.set_homeuri_from_pau.set_homeuri_from_pau,Not Support,no,no,no,no,[MCF]Copy the home uri from 200 OK REGISTER PAU-header.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2128,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_non_sendrecv_rtcp_0,ua_config.set_non_sendrecv_rtcp_0,OTA and OTA BY OP,no,no,no,no,"According to IR.92 3.2.4 RTCP Usage:<BR>If the UE received an SDP answer containing zero values in both of the "b=RS" and "b=RR" attributes,<BR>then (regardless of the values assigned to these attributes in the corresponding SDP offer)<BR>the UE must not send RTCP packets and must consider RTCP to be disabled for the session.<BR>0:No matter RS or RR value is zero in SDP answer, to provide RTP streaming information and RTCP-CMR, UE will send or receive RTCP packets according to default value.<BR>1:Follow IR.92 suggestion, if RS or RR value is zero in SDP answer, then UE must consider RTCP to be disabled for the session.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:No matter RS or RR value is zero in SDP answer, to provide RTP streaming information and RTCP<BR>1:Follow IR",,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi for TMOUS<BR>[Test Step] MO a Call to send SIP INVITE, and let SIP 183's audio SDP RS/RR both 0<BR>[Expected Result] Check SIP UPDATE/Re-INVITE audio SDP RS/RR, if config is 1, RS/RR will be 0, else RS/RR will be non-zero.",Untested,,,,
+2128,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_non_sendrecv_rtcp_0,ua_config.set_non_sendrecv_rtcp_0,OTA and OTA BY OP,no,no,no,no,"According to IR.92 3.2.4 RTCP Usage:<BR>If the UE received an SDP answer containing zero values in both of the "b=RS" and "b=RR" attributes,<BR>then (regardless of the values assigned to these attributes in the corresponding SDP offer)<BR>the UE must not send RTCP packets and must consider RTCP to be disabled for the session.<BR>0:No matter RS or RR value is zero in SDP answer, to provide RTP streaming information and RTCP-CMR, UE will send or receive RTCP packets according to default value.<BR>1:Follow IR.92 suggestion, if RS or RR value is zero in SDP answer, then UE must consider RTCP to be disabled for the session.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:No matter RS or RR value is zero in SDP answer, to provide RTP streaming information and RTCP<BR>1:Follow IR",,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi for TMOUS<BR>[Test Step] MO a Call to send SIP INVITE, and let SIP 183's audio SDP RS/RR both 0<BR>[Expected Result] Check SIP UPDATE/Re-INVITE audio SDP RS/RR, if config is 1, RS/RR will be 0, else RS/RR will be non-zero.",Pass,,,,
2129,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_non_sendrecv_rtcp_0.set_non_sendrecv_rtcp_0,ua_config.set_non_sendrecv_rtcp_0.set_non_sendrecv_rtcp_0,Not Support,no,no,no,no,"[MCF]According to IR.92 3.2.4 RTCP Usage:If the UE received an SDP answer containing zero values in both of the b=RS and b=RR attributes, then (regardless of the values assigned to these attributes in the corresponding SDP offer) the UE must not send RTCP packets and must consider RTCP to be disabled for the session.bit 0:0:No matter RS or RR value is zero in SDP answer, to provide RTP streaming information and RTCP-CMR, UE will send or receive RTCP packets according to default valuebit 1:1:Follow IR.92 suggestion, if RS or RR value is zero in SDP answer, then UE must consider RTCP to be disabled for the session.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2130,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_rtcp_0,ua_config.set_rtcp_0,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>For 3GPP TS 34.229 release 9 PCT test cases and GSMA IR.92 6.0, the rtcp bandwidth RS/RR shall be sent to 0 for the initial INVITE request. For the newest specification, the RTCP bandwidth RS/RR shall not be 0. The UE support GSMA IR.92 6.0 when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi. <BR>[Test Step] Make MO call <BR>[Expected Result] This configure is set to 1 then the RS and RR bandwidth will be 0 in SDP body of SIP INVITE request.,Pass,,,,
2131,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_rtcp_0.set_rtcp_0,ua_config.set_rtcp_0.set_rtcp_0,Not Support,no,no,no,no,"[MCF]For TS 34.229 release 9 PCT test cases and IR.92 6.0, the rtcp bandwidth RS/RR shall be sent to 0 for the initial INVITE request. For the newest specification, the RTCP bandwidth RS/RR shall not be 0. The UE support IR.92 6.0 when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -2131,7 +2131,7 @@
2145,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_compact_headers.sip_compact_headers,ua_config.sip_compact_headers.sip_compact_headers,Not Support,no,no,no,no,"[MCF]RFC3261, 7.3.3 Compact Form, whether compact-form header names are used or notbit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2146,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_dscp,ua_config.sip_dscp,OTA and OTA BY OP,no,yes,no,no,"The urgency of the request as perceived by the client (human or a UA), <BR>",UNSIGNED SHORT,2,,,26,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
2147,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_priority,ua_config.sip_priority,Not Support,no,yes,no,no,To set the protocol-defined priority for all packets to be sent on this socket.<BR>Linux uses this value to order the networking queues: packets with a higher priority may be processed first depending on the selected device queueing discipline<BR>,UNSIGNED SHORT,2,,,7,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-2148,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sit_tcp_2xx_rsp_retransmission,ua_config.sit_tcp_2xx_rsp_retransmission,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>SIP transaction help to retransmit TCP 2XX SIP respnse message in Server INVITE transaction<BR>0: only retransmit UDP response<BR>1: retransmit UDP response + TCP 2XX,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:only retransmit UDP response<BR>1:retransmit UDP response + TCP 2XX,,,,IMS,IMS,,,(1) set sit_tcp_2xx_rsp_retransmission to '1'<BR>(2) check UE whether re-transmission 200OK for MT call when MT device does not send SIP ACK,Untested,,,,
+2148,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sit_tcp_2xx_rsp_retransmission,ua_config.sit_tcp_2xx_rsp_retransmission,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>SIP transaction help to retransmit TCP 2XX SIP respnse message in Server INVITE transaction<BR>0: only retransmit UDP response<BR>1: retransmit UDP response + TCP 2XX,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:only retransmit UDP response<BR>1:retransmit UDP response + TCP 2XX,,,,IMS,IMS,,,(1) set sit_tcp_2xx_rsp_retransmission to '1'<BR>(2) check UE whether re-transmission 200OK for MT call when MT device does not send SIP ACK,Pass,,,,
2149,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sit_tcp_2xx_rsp_retransmission.sit_tcp_2xx_rsp_retransmission,ua_config.sit_tcp_2xx_rsp_retransmission.sit_tcp_2xx_rsp_retransmission,Not Support,no,no,no,no,[MCF]SIP transaction help to retransmit TCP 2XX SIP respnse message in Server INVITE transactionbit 0:0:only retransmit UDP responsebit 1:1:retransmit UDP response + TCP 2XX,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2150,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_follow_nw_ims_vops_support,ua_config.sms_follow_nw_ims_vops_support,OTA and OTA BY OP,no,no,no,no,"When enabled, smsip tag is included in (re-) REGISTER requests only if UE is on cell with has VoPS support. Change in VoPS support status will also trigger a registration refresh. Similar to follow_nw_ims_vops_support Call flag.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS register on 4G in network which supports initial IMS registration or registration maintenance in 2/3G<BR>[Test Step] Handover to 2/3G. Send an MO SMS and receive an MT SMS.<BR>[Expected Result]<BR>SMS transmission and receiption succeeds",Pass,,,,
2151,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_follow_nw_ims_vops_support.sms_follow_nw_ims_vops_support,ua_config.sms_follow_nw_ims_vops_support.sms_follow_nw_ims_vops_support,Not Support,no,no,no,no,"[MCF]When enabled, smsip tag is included in (re-) REGISTER requests only if UE is on cell with has VoPS support. Change in VoPS support status will also trigger a registration refresh. Similar to follow_nw_ims_vops_support Call flag.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -2172,7 +2172,7 @@
2187,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.support_video_early_media,ua_config.support_video_early_media.support_video_early_media,Not Support,no,no,no,no,"[MCF]If enable, UE will normally handle the scenario that NW send UPDATE with PEM:sendonly/sendrecv, and m:video a:sendonly/sendrecv. If disable, when above scenario happens, UE will configure video rtp direction as inactive.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2188,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tcp_connect_max_time_all,ua_config.tcp_connect_max_time_all,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>unit: sec<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] <BR>[Test Step] Let the DUT Register<BR>[Expected Result] <BR> enable: socket timeout is equal to value set<BR> disable: socket timeout is 10 seconds,Pass,,,,
2189,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tcp_connect_max_time_invite,ua_config.tcp_connect_max_time_invite,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>MAX time to connect a TCP socket when sending INVITE request. <BR>unit: sec<BR>,UNSIGNED INT,4,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,SMS transmission and receiption succeeds.,Pass,,,,
-2190,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tdelay,ua_config.tdelay,OTA and OTA BY OP,no,no,no,no,Indicate how long IMS should wait for to trigger re-registration when UE moves from eHRPD to LTE. <BR>unit: sec<BR>,UNSIGNED INT,4,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[init] ims register over eHRPD like with sms only<BR>[test step] move UE from eHRPD to LTE and let UE re-register , only valid ofr hVolte case<BR>[Expected Results]check IMS should wait for to trigger re-registration when UE moves from eHRPD to LTE.",Untested,,,,
+2190,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tdelay,ua_config.tdelay,OTA and OTA BY OP,no,no,no,no,Indicate how long IMS should wait for to trigger re-registration when UE moves from eHRPD to LTE. <BR>unit: sec<BR>,UNSIGNED INT,4,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[init] ims register over eHRPD like with sms only<BR>[test step] move UE from eHRPD to LTE and let UE re-register , only valid ofr hVolte case<BR>[Expected Results]check IMS should wait for to trigger re-registration when UE moves from eHRPD to LTE.",Pass,,,,
2191,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",terminal_based_cw,ua_config.terminal_based_cw,OTA and OTA BY OP,no,no,no,no,From TS TS 24.615 Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem and from IR.92 the UE based CW shall be supported. So we add Alert-Info header field if another communication is existed. However the operator can choose to not to add this header field. The UE adds the header when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi. The network suppport terminal based call waiting<BR>[Test Step] Make MO call and then MT call is coming<BR>[Expected Result] If the configuration is set to 1, the Alert-Info header field with call-waiting tag will be added to 18x response.",Pass,,,,
2192,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",terminal_based_cw.terminal_based_cw,ua_config.terminal_based_cw.terminal_based_cw,Not Support,no,no,no,no,[MCF]From TS TS 24.615 Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem and from IR.92 the UE based CW shall be supported. So we add Alert-Info header field if another communication is existed. However the operator can choose to not to add this header field. The UE adds the header when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2193,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",text_feature_tag,ua_config.text_feature_tag,OTA and OTA BY OP,no,no,no,no,This parameter is used to control if carrying text feature tag or not in Contact header.<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Internal Use,Untested,,,,
@@ -2253,7 +2253,7 @@
2269,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_emerg_pidf_country.wfc_emerg_pidf_country,ua_config.wfc_emerg_pidf_country.wfc_emerg_pidf_country,Not Support,no,no,no,no,[MCF]Add pidf civic country. More details in 3GPP TS 33.108 (and 33.106 and 33.107).bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2270,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_emerg_pidf_lng_lat_country,ua_config.wfc_emerg_pidf_lng_lat_country,OTA and OTA BY OP,no,no,no,no,Add country/state/city infromation along with latitude and longitude<BR>0:Add longitude and latitude<BR>1:add country/state/city and longitude and latitude<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Add longitude and latitude<BR>1:add country,,,,IMS,IMS,,,""[Init] IMS Registered over VoWiFi<BR>[Test Step] Emergency call<BR>[Expected Result] When enabled; country, state and city information visible at location info"",Pass,,,,
2271,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_emerg_pidf_lng_lat_country.wfc_emerg_pidf_lng_lat_country,ua_config.wfc_emerg_pidf_lng_lat_country.wfc_emerg_pidf_lng_lat_country,Not Support,no,no,no,no,[MCF]Add country/state/city infromation along with latitude and longitudebit 0:0:Add longitude and latitudebit 1:1:add country/state/city and longitude and latitude,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2272,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_refresh_23g,ua_config.wfc_refresh_23g,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Trigger re-registration when wifi , 23G rat change happen.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] NW should support IMS over 3G<BR>[Test Step] IMS registration over 3G and handover to wifi<BR>[Expected Result] check if IMS sends re-REGISTER over wifi,Untested,,,,
+2272,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_refresh_23g,ua_config.wfc_refresh_23g,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Trigger re-registration when wifi , 23G rat change happen.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] NW should support IMS over 3G<BR>[Test Step] IMS registration over 3G and handover to wifi<BR>[Expected Result] check if IMS sends re-REGISTER over wifi,Pass,,,,
2273,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_refresh_23g.wfc_refresh_23g,ua_config.wfc_refresh_23g.wfc_refresh_23g,Not Support,no,no,no,no,[MCF]Trigger re-registration when wifi -> 23G rat change happen.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2274,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_with_plani,ua_config.wfc_with_plani,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER takes P-Last-Access-Network-Info header when UE is in WiFi<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,(1) set wfc_with_plani to '1'<BR>(2) check whether SIP REGISTER bring P-LANI header in WFC registration,Pass,,,,
2275,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_with_plani.wfc_with_plani,ua_config.wfc_with_plani.wfc_with_plani,Not Support,no,no,no,no,[MCF]Indicate if REGISTER takes P-Last-Access-Network-Info header when UE is in WiFibit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -5391,7 +5391,7 @@
5412,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,enable,factory.algo_err_dump_iq.enable,OTA,no,no,yes,no,factory,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
5413,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,blk_lp_idx,factory.force_dump_iq.blk_lp_idx,OTA,no,no,yes,no,factory,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
5414,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,cal_item,factory.force_dump_iq.cal_item,OTA,no,no,yes,no,factory,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-5415,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,cbw,factory.force_dump_iq.cbw,OTA,no,no,yes,no,factory,UNION,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+5415,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,cbw,factory.force_dump_iq.cbw,Not Support,no,no,yes,no,factory,UNION,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
5416,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,comp_route,factory.force_dump_iq.comp_route,OTA,no,no,yes,no,factory,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
5417,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,dump_type,factory.force_dump_iq.dump_type,OTA,no,no,yes,no,factory,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
5418,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,edge_lp_idx,factory.force_dump_iq.edge_lp_idx,OTA,no,no,yes,no,factory,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0<BR>0:0<BR>0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
@@ -5577,885 +5577,885 @@
5598,963,NVRAM_EF_SBP_CUSTOM_MODEM_CONFIG_LID,1,sbp_cust_cfg_type,sbp_custom_config[0~99].sbp_cust_cfg_type,OTA and OTA BY OP,no,no,no,yes,"sbp feature type - 0: none, 1: sbp feature, 2: sbp feature data",ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:SBP_CUST_CFG_TYPE_NONE<BR>2:SBP_CUST_CFG_TYPE_DATA<BR>1:SBP_CUST_CFG_TYPE_FEATURE,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
5599,963,NVRAM_EF_SBP_CUSTOM_MODEM_CONFIG_LID,1,sbp_id,sbp_custom_config[0~99].sbp_id,OTA and OTA BY OP,no,no,no,yes,sbp id to be customized,UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1004,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
5600,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config,modem_sbp_config,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature",UNSIGNED CHAR,161,161,,NA,NR15.R3.MD700.IVT.MP1MR3.MP,,"array: {0~ff,0~ff,0~ff...}:1 bit for 1 sbp_feature",,,,D-SBP,SBP,,,follow MCF RDIT SOP,Pass,,,,
-5601,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_1XRTT_DISABLE_VOICE_CALL,modem_sbp_config[104].SBP_1XRTT_DISABLE_VOICE_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable 1xRTT voice callbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01::enable<BR>0x00::disable,,,,1xRTT,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] Try to do a voice call by 1xRTT<BR>[Expected Result] Fail to do the voice call,Pass,,,,
-5602,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_1XRTT_ENHANCE_AEHO,modem_sbp_config[55].SBP_1XRTT_ENHANCE_AEHO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature1xrtt enhanced AEHObit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Vzw MO/MT call,Pass,,,,
-5603,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_1XRTT_ENHANCE_SILENT_RETRY,modem_sbp_config[55].SBP_1XRTT_ENHANCE_SILENT_RETRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIf 1xRTT can not camp on system when scan exhaust SRSL(Silent Retry Scan List), scan system with system lost scan listbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Vzw MO call test in poor signal,Pass,,,,
-5604,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_2G_CAP_FORCE_R9,modem_sbp_config[59].SBP_2G_CAP_FORCE_R9,OTA and OTA BY OP,no,no,no,yes,"During FT, we have found that some NW doesn't respond to ATTACH REQUEST if UE sends 2G capability in MS classmark3 later than Release 9 (based on GERAN_RELEASE_SUPPORT value). <BR>To overcome this case, we have provided this SBP so that UE can report 2G capability only till Release 9 (if SBP is TRUE).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Report 2G capability in Classmark 3 till Release 9<BR>0:Report 2G capability in Classmark 3 as per GERAN_RELEASE_SUPPORT,,,__2G_CAP_FORCE_R9__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5605,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_2G_CUSTOMIZED_APC_ALG,modem_sbp_config[61].SBP_2G_CUSTOMIZED_APC_ALG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureENABLE_2G_CUSTOMIZED_APC_ALGbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-5606,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_2G_DISABLED_WITH_ECC_ALLOWED,modem_sbp_config[69].SBP_2G_DISABLED_WITH_ECC_ALLOWED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport the functionality of 2G disabled with ECC allowed on 2G. Triggered by AT+EGMC with configuring rat_disable_with_eccbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5607,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_2G_FDD_FLIGHT_MODE_RETAIN_STORED_SI,modem_sbp_config[81].SBP_2G_FDD_FLIGHT_MODE_RETAIN_STORED_SI,OTA and OTA BY OP,no,no,no,yes,Configuration of SBP Feature is for 2G FDD to retain Stored SI List context across Flight Mode switch,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will retain Stored System Information across Flight mode<BR>0:GSM will not retain Stored System Information across Flight mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5608,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_2G_FDD_USE_STORED_SI,modem_sbp_config[81].SBP_2G_FDD_USE_STORED_SI,OTA and OTA BY OP,no,no,no,yes,SBP controls the 2G Stored SI feature:<BR>RRM will be storing the System information of the camped on cell during cell selection.<BR>A Stored System Information List will be maintained in RRM.<BR>This Stored information will be re-used by in later Cell Selections.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will be using the Stored System Information list<BR>0:GSM will not be using the Stored System Information list,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5609,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_2G_PLMN_LIST_SPEED_MODE,modem_sbp_config[68].SBP_2G_PLMN_LIST_SPEED_MODE,OTA and OTA BY OP,no,no,no,yes,"If UE suffers from taking long time to perform PLMN List, this SBP is able to improve the speed when performing PLMN List on 2G; yet, it takes risk for the accuracy being lower.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Improve the speed for 2G PLMN List with lower accuracy.<BR>0:Disable. The UE would utilize original PLMN List mechanism.,,,__DISABLE_GAS_LIST_SPEED_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5610,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_2G_RXLEV_ACCESS_MIN,modem_sbp_config[55].SBP_2G_RXLEV_ACCESS_MIN,OTA and OTA BY OP,no,no,no,yes,This feature allows the customer to set the value of RXLEV_ACCESS_MIN which is used to calculate C1/C2.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will use RXLEV_ACCESS_MIN based on customized value set.<BR>0:GSM will use RXLEV_ACCESS_MIN as obtained from network.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5611,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_2G_RXQUAL_MEAS_MODIFY_ENABLE_FDD,modem_sbp_config[64].SBP_2G_RXQUAL_MEAS_MODIFY_ENABLE_FDD,OTA and OTA BY OP,no,no,no,yes,"This SBP is to enable Measurement modification Algorithm based on Rxual received by GAS from 2G L1. The other values dependent in Measurement modification are from custom values defined in GAS custom file.<BR>When this SBP is enabled, Rxqual based Measurement modification Algorithm could be enabled.<BR>When this SBP is disabled, Rxqual based Measurement modification Algorithm could be enabled.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable Rxqual based Measurement modification Algorithm.<BR>0:Disable. By Default Disable Rxqual based Measurement modification Algorithm .,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5612,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_2G_SEND_ANY_CHANNEL_FOR_MT_CSFB,modem_sbp_config[96].SBP_2G_SEND_ANY_CHANNEL_FOR_MT_CSFB,OTA and OTA BY OP,no,no,no,yes,"During MT CSFB, if the mobile station is paged for a speech call or for any other CS service requiring a traffic channel, if the SBP is enable, then Mobile station sends Channel type as ANY CHANNEL other wise Channel type as TCH/H or TCH/F as per 3GPP spec.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Send Channel type on RACH as TCH/H or TCH/F for MT CSFB paging respose for CS<BR>0:Send Channel type on RACH as ANY CHANNEL for MT CSFB paging respose for CS,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5613,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_3G3_PINGPONG_RESTRAIN,modem_sbp_config[94].SBP_3G3_PINGPONG_RESTRAIN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to avoid 3G to 3G reselection pingpong (restrained)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5614,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_3G4_IRRDT_NO_CELL_SET_RAU_NOT_REQUIRED,modem_sbp_config[89].SBP_3G4_IRRDT_NO_CELL_SET_RAU_NOT_REQUIRED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDecide the rau_required flag should be set or not if prvious 3G4 IRRDT with 4G no cell.bit 0:0:Disabled.Still set rau_required flag during IR to 2/3G when previous 3G4 IRRDT with 4G no cell.bit 1:1:Enabled.Don't set rau_required flag during IR to 2/3G when previous 3G4 IRRDT with 4G no cell.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0: disable,1:enable",,,,MD Config,Modem - Customer Requirement,,,"[Prerequistes]UE with CMCC SIM card inserted and camp on TDS cell @CMCC XinJiang Province, Changji City<BR>[Operation steps]Using REF phone as MO, DUT is MT<BR>[Actual results]DUT could not receive MT call.<BR>[Expected results]DUT could receive MT call.",Pass,,,,
-5615,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_3G_CB_SERVICE_BY_PLMN,modem_sbp_config[1].SBP_3G_CB_SERVICE_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurein 3G, CB service enabled/disabled decided by PLMN or notbit 0:0:Disabled. In 3G, CB service enabled/disabled not decided by PLMNbit 1:1:Enabled. In 3G, CB service enabled/disabled decided by PLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"[0,1]",,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5616,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_3G_CONTINUE_PLMN_SEARCH_IN_VIRTUAL_MODE,modem_sbp_config[91].SBP_3G_CONTINUE_PLMN_SEARCH_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] <BR>This feature enables UE to continue PLMN search in virtual mode.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5617,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_3G_CSG,modem_sbp_config[10].SBP_3G_CSG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to configure CSG in 3G.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5618,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_4G23_LOCAL_REL_IMS_PDN,modem_sbp_config[35].SBP_4G23_LOCAL_REL_IMS_PDN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSBP_4G23_LOCAL_REL_IMS_PDNbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Release of IMS PDN (when 4G to 23G inter-RAT) is enabled from SM module<BR>0:Release of IMS PDN (when 4G to 23G inter-RAT) is disabled from SM module,,,__SM_4G23_LOCAL_REL_IMS_PDN__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5619,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_4G3_FAST_REDIRECTION,modem_sbp_config[57].SBP_4G3_FAST_REDIRECTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to perform Fast redirection during 4G to 3G Redirection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5620,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_4G_BACKGROUND_SEARCH_OPTIMIZATION_3G,modem_sbp_config[27].SBP_4G_BACKGROUND_SEARCH_OPTIMIZATION_3G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]This feature enables UE to configure 4G background search optimisation in 3G",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5621,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_ABNORMAL_ATT_TAU_EUTRAN_DISABLE_T3402,modem_sbp_config[41].SBP_ABNORMAL_ATT_TAU_EUTRAN_DISABLE_T3402,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen handling the abnormal cases of Attach/TAU procedure, disable EUTRAN with T3402 valuebit 0:0:Turn-off. Do not disable EUTRANbit 1:1:Turn-on. Disable EUTRAN with T3402 value",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5622,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_CONN_PROCEDURE,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_CONN_PROCEDURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBy turning on SBP_ACCELERATE_EMC_PDN_CONN_PROCEDURE, NAS can abort activation procedure of emergency PDN connection earlier if it found the results is failurebit 0:0:Disable: UE tries to send PDN connectivity request at most 5 times to activate emergency PDN connectionbit 1:1:Enable: UE may report failure of emergency PDN connection activation earlier",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE make VoLTE ECC call.<BR>[Test Step] <BR>UE fails to make VoLTE ECC call (nw does not reply EMC PDN connectivity request)<BR>[Expected Result]<BR>Emergency PDN CONNECTIVITY REQUEST, the timeout/retry limit is 1.",Pass,,,,
-5623,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_DISCONN_PROCEDURE,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_DISCONN_PROCEDURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBy turning on SBP_ACCELERATE_EMC_PDN_DISCONN_PROCEDURE, NAS can report deactivation procedure success (emergency PDN disconnect) earlierbit 0:0:Disable: UE tries to send PDN disconnect request at most 5 times to deactivate emergency PDN connectionbit 1:1:Enable: UE may report disconnect of emergency PDN connection earlier",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE make VoLTE ECC call success<BR>[Test Step] <BR>UE hangup a VoLTE ECC call.<BR>UE tries to send PDN disconnect request.<BR>NW does not response PDN disconnect request.<BR>[Expected Result]<BR>Emergency PDN DISCONNECTIVITY REQUEST, the timeout/retry limit is 1.",Pass,,,,
-5624,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_ACCESS_STRATUM_RELEASE,modem_sbp_config[97].SBP_ACCESS_STRATUM_RELEASE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to configure Access stratum release",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5625,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_ACL_SUPPORT,modem_sbp_config[27].SBP_ACL_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport ACL featurebit 0:0:UE does not support ACL feature.bit 1:1:UE supports ACL feature.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-5626,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_ADAPTIVE_PAGING_PERIOD_IN_UNACK_MODE,modem_sbp_config[5].SBP_ADAPTIVE_PAGING_PERIOD_IN_UNACK_MODE,OTA and OTA BY OP,no,no,no,yes,This feature enables MS to receive paging (for MT call) when performing GPRS/EDGE PS transmission with RLC unack mode. It is turned on by default. Turn off this feature if MS cannot complete PS transmission with RLC unack mode,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Adaptive Paging Period in UNACK MODE Enabled<BR>0:Adaptive Paging Period in UNACK MODE disabled,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5627,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_AFR_FROM_4G_LOCAL_RELEASE_ENABLE,modem_sbp_config[93].SBP_AFR_FROM_4G_LOCAL_RELEASE_ENABLE,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureWhen call ended in 4G, UE use this setting to determine whether to perform local releasebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE may perform local release after a specific time defined in NVRAM.<BR>0:Disabled. UE do not perform local release.,,,,Auto Fast Return for NR,OP Requirement,,,Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-5628,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_CSFB,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_CSFB,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureAFR to 4G will use this setting to check whether a CSFB is a preconditionbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,,Auto Fast Return for NR,OP Requirement,,,"Format: <BR> Test in machine (Y)<BR> Test Time (minutes) <BR> [Init] <BR>For test_SIM, you need step_1) + step_2)<BR>For normal_SIM, you need step_2)<BR><BR><BR>Step_1): Force TEST_MODE/TEST_SIM to be NORMAL_MODE/NORMAL_SIM.<BR>If you want to test AFR under TEST_MODE/TEST_SIM<BR>Set NVRAM_EF_TEST_SIM_LID<BR>1 = Force Normal SIM [select this]<BR>2 = Force Test SIM<BR><BR><BR>Step_2): Add SIM PLMN into AFR whitelist<BR>edit NVRAM: NVRAM_EF_AS_AFR_LID<BR>Add the SIM card PLMN_ID into hplmn_afr_mapping[x] (please refer to Note1)<BR>edit corresponding AFR capability control bit to True<BR> afr_2G4 = True<BR> afr_3G4 = True<BR> afr_2G5_FDD = True<BR> afr_2G5_TDD = True<BR> afr_3G5_FDD = True<BR> afr_3G5_TDD = True<BR> afr_4G5 = True<BR> afr_timer = 15<BR><BR> [Test Step] <BR> UE camp on 4G, (in idle)<BR> UE want to make MO call<BR> UE suffer RA feailure on 4G<BR> UE RatChange to 2/3G to proceed CC procedure for voice service.<BR> voice start and end at 2/3G.<BR> after voice service complete, 2/3G get RrcRel (without redirect_info)<BR> <BR> if SBP=TRUE, it means UE can only proceed AFR to highRAT(4G) if CSFB is existed.<BR> so...UE should stay in 2/3G<BR> <BR> if SBP=FALSE, it means UE can proceed AFR to highRAT(4G) if CSFB is not existed.<BR> so...UE AFR back to 4G <BR> <BR> [Expected Result]<BR> UE follow SBP value to proceed AFR to 4G.",Pass,,,,
-5629,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_SRVCC,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_SRVCC,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureAFR to 4G will use this setting to check whether a SRVCC is a preconditionbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,,Auto Fast Return for NR,OP Requirement,,,"Format: <BR> Test in machine (Y)<BR> Test Time (minutes) <BR> [Init] [you can also refer to attached file HowToSetNVRAM.docx]<BR>For test_SIM, you need step_1) + step_2)<BR>For normal_SIM, you need step_2)<BR><BR><BR>Step_1): Force TEST_MODE/TEST_SIM to be NORMAL_MODE/NORMAL_SIM.<BR>If you want to test AFR under TEST_MODE/TEST_SIM<BR>Set NVRAM_EF_TEST_SIM_LID<BR>1 = Force Normal SIM [select this]<BR>2 = Force Test SIM<BR><BR><BR>Step_2): Add SIM PLMN into AFR whitelist<BR>edit NVRAM: NVRAM_EF_AS_AFR_LID<BR>Add the SIM card PLMN_ID into hplmn_afr_mapping[x] (please refer to Note1)<BR>edit corresponding AFR capability control bit to True<BR> afr_2G4 = True<BR> afr_3G4 = True<BR> afr_2G5_FDD = True<BR> afr_2G5_TDD = True<BR> afr_3G5_FDD = True<BR> afr_3G5_TDD = True<BR> afr_4G5 = True<BR> afr_timer = 15<BR>================================================<BR><BR><BR> UE camp on 4G, (in idle)<BR> UE want to make MO call<BR> UE suffer RA feailure on 4G<BR> UE RatChange to 2/3G to proceed CC procedure for voice service.<BR> voice start and end at 2/3G.<BR> after voice service complete, 2/3G get RrcRel (without redirect_info)<BR> <BR> if SBP=TRUE, it means UE can only proceed AFR to highRAT(4G) if SRVCC is existed.<BR> so...UE should stay in 2/3G<BR> <BR> if SBP=FALSE, it means UE can proceed AFR to highRAT(4G) if SRVCC is not existed.<BR> so...UE AFR back to 4G <BR><BR><BR> <BR> [Expected Result]<BR> UE follow SBP value to proceed AFR to 4G.",Pass,,,,
-5630,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_AFR_TO_5G_REQUIRE_EPSFB,modem_sbp_config[90].SBP_AFR_TO_5G_REQUIRE_EPSFB,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureAFR to 5G will use this setting to check whether an EPSFB is a preconditionbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,,Auto Fast Return for NR,OP Requirement,,,"N/A, VoNR is not ready now",Untested,,,,
-5631,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_AFR_TO_5G_REQUIRE_SRVCC,modem_sbp_config[91].SBP_AFR_TO_5G_REQUIRE_SRVCC,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureAFR to 5G will use this setting to check whether a SRVCC is a preconditionbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,,Auto Fast Return for NR,OP Requirement,,,"N/A, VoNR is not ready now",Untested,,,,
-5632,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_ALIGN_CELL_RESELECTION_JUDGE,modem_sbp_config[34].SBP_ALIGN_CELL_RESELECTION_JUDGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurestart 2G/3G reselection judge when 4G measuement are receivedbit 0:0:Not align cell reselection judge with LTE measurementbit 1:1:Align cell reselection judge with LTE measurement",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. IRAT reselection procedure will wait for LTE measurement result<BR>0:Disable. Do IRAT reselection procedure as usual,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5633,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_ALLOW_CSFB_FOR_DATAONLY,modem_sbp_config[30].SBP_ALLOW_CSFB_FOR_DATAONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow CSFB for data only devicebit 0:0:Disabled. Device will not process the MT CS servicesbit 1:1:Enabled. Device will process the MT CS services",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Device will process the MT CS services<BR>0:Disabled. Device will not process the MT CS services,,,__ALLOW_CSFB_FOR_DATAONLY__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5634,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_ALLOW_EARLY_ROAMING_4G_FIRST,modem_sbp_config[63].SBP_ALLOW_EARLY_ROAMING_4G_FIRST,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger PLMN search when roaming 4G NW is found during stored frequency searchbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-5635,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_ALLOW_EMC_PDN_WHEN_NW_REJ_CONN,modem_sbp_config[62].SBP_ALLOW_EMC_PDN_WHEN_NW_REJ_CONN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature Allow EMC PDN setup when Access Barring caused by NW_REJ_CONNbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Allow emergency PDN when Access barring is caused because NW reject connection.<BR>0:Disable. Don't allow emergency PDN when Access barring is caused because NW reject connection.,,,__SBP_ALLOW_EMC_PDN_WHEN_NEW_REJ_CONN__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5636,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_ALLOW_FAST_DORMANCY_DURING_VOICE_CALL,modem_sbp_config[40].SBP_ALLOW_FAST_DORMANCY_DURING_VOICE_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to allow fast dormancy during voice call",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5637,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ALLOW_NULL_APN_FOR_ADDITIONAL_PDN,modem_sbp_config[37].SBP_ALLOW_NULL_APN_FOR_ADDITIONAL_PDN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBy turning on SBP_ALLOW_NULL_APN_FOR_ADDITIONAL_PDN, UE is allowable to use NULL APN to activate additional PDN connectionbit 0:0:Disable: UE needs to assign specific APN to activate additional PDN connectionbit 1:1:Enalbe: UE could activate additional PDN connection without assiging APN (with NULL APN)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:disable<BR>bit 1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE attachs to LTE<BR>[Test Step] <BR>UE could activate additional PDN connection without assiging APN (with NULL APN)<BR>[Expected Result]<BR>UE could activate additional PDN connection without assiging APN (with NULL APN),Pass,,,,
-5638,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_ALLOW_PDP_ACTIVATION_TRIGGER_23G_GMM_ATTACH,modem_sbp_config[61].SBP_ALLOW_PDP_ACTIVATION_TRIGGER_23G_GMM_ATTACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature To allow pdp activation trigger 23G GMM attachbit 0:0:Not Allowbit 1:1:Allow",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Allow PDP context activation procedure triggers PS attachment procedure in 23G PS non-attach state<BR>0:Not allow PDP context activation procedure triggers PS attachment procedure in 23G PS non-attach state,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5639,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_ALLOW_PDP_ACT_OVER_NEW_CONNECTION_WHEN_RAU_FOR_FALSE,modem_sbp_config[99].SBP_ALLOW_PDP_ACT_OVER_NEW_CONNECTION_WHEN_RAU_FOR_FALSE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow PDP Activation on new RRC connection when RAU was performed with FOR bit FALSEbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Allow PDP to activate on existing RRC connection<BR>0x1:Allow PDP Activation on new RRC connection when RAU was performed with FOR bit FALSE,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] <BR>1. Trigger CS and PS registration in 3G<BR>2. Trigger RAU with FOR as 0<BR>3. Trigger PDP activation as well<BR>4. Observe that PDP activation should happen over new RRC connection<BR>[Expected Result]<BR>Observe that PDP activation should happen over new RRC connection,Pass,,,,
-5640,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_ALLOW_PDP_ACT_OVER_NEW_RRC_CONNECTION,modem_sbp_config[92].SBP_ALLOW_PDP_ACT_OVER_NEW_RRC_CONNECTION,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow PDP to activate over new PS signaling /RRC connectionbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Allow PDP to activate on either new RRC connection or existing RRC connection<BR>0x1:Allow PDP to activate on new RRC connection always,,,This feature can be enabled by compile option __ALLOW_PDP_ACT_OVER_NEW_RRC_CONNECTION__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G<BR>->Trigger PDP activation <BR>[Expected Result]<BR>Observe that PDP activation will be triggered over new RRC connection,Pass,,,,
-5641,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_ALLOW_REGISTRATION_FOR_PPAC_RESTRICTION,modem_sbp_config[26].SBP_ALLOW_REGISTRATION_FOR_PPAC_RESTRICTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow Registration when PPAC(Paging Permission Access control) restriction is onbit 0:0:Do not allow Registration when PPAC(Paging Permission Access control) restriction is onbit 1:1:Allow Registration when PPAC restriction is on",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If SBP is enabled, Allow Registration when PPAC(Paging Permission Access control) is restricted for PS and requested<BR>0:If SBP is not enabled, Registration is not allowed when PPAC(Paging Permission Access control) is restricted<BR>domain is CS or when PPAC(Paging Permission Access control) is restricted for CS and requested domain is PS",,,__ALLOW_REGISTRATION_FOR_PPAC_RESTRICTION__,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-5642,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_ALLOW_SIM_REFRESH_RESET_WHEN_IN_CALL,modem_sbp_config[8].SBP_ALLOW_SIM_REFRESH_RESET_WHEN_IN_CALL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow SIM Refresh(UICC Reset) proactive command during callbit 0:0:Disable. Not perform UICC RESET type of REFRESH during a call.bit 1:1:Enable. Perform UICC RESET type of REFRESH curing a call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5643,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_ALWAYS_TRIGGER_IVSR_AFTER_POWER_ON,modem_sbp_config[57].SBP_ALWAYS_TRIGGER_IVSR_AFTER_POWER_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAlways trigger IVSR after power-on or leave flight mode or SIM hot swapbit 0:0:Disabled. Do not trigger IVSR if UE does not register beforebit 1:1:Enabled. Always trigger IVSR after power-on",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5644,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_AMR_WB_GSM,modem_sbp_config[7].SBP_AMR_WB_GSM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis feature is used to enable/disable AMR-WB codec in GSMbit 0:0:Disable AMR-WB codec in GSMbit 1:1:Enable AMR-WB codec in GSM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5645,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_AMR_WB_UMTS,modem_sbp_config[7].SBP_AMR_WB_UMTS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis feature is used to enable/disable AMR-WB codec in UMTSbit 0:0:Disable AMR-WB codec in UMTSbit 1:1:Enable AMR-WB codec in UMTS",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5646,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_APPLMN_LIST,modem_sbp_config[16].SBP_APPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable APPLMN List mechanism: append predefined PLMN to PLMN search list.bit 0:0:Disabled. Not apply APPLMN list mechanismbit 1:1:Enabled. Apply APLLMN list mechanism",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5647,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_APPLY_DEFAULT_VALUE_FOR_BACKOFF_TIMER,modem_sbp_config[64].SBP_APPLY_DEFAULT_VALUE_FOR_BACKOFF_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply 3GPP default back-Off timer valuebit 0:0:UE does not apply the default value (12 minutes) for the back-off timer.bit 1:1:UE applies the default value (12 minutes) for the back-off timer.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,LTE Protocol (R13 Baseline),4G,,,Legacy Feature,Pass,,,,
-5648,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_APPLY_OR_LOGIC_FOR_EAB_LOW_PRIORITY_OVERRIDE,modem_sbp_config[88].SBP_APPLY_OR_LOGIC_FOR_EAB_LOW_PRIORITY_OVERRIDE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply OR logic for EAB/Low Priority overridebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5649,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_AP_SUPPORTS_MULTIPLE_PS,modem_sbp_config[43].SBP_AP_SUPPORTS_MULTIPLE_PS,Not Support,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete because not used in MD now.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,NA,,,,MD Config,Modem - Customer Requirement,,,NA,Untested,,,,
+5601,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_1XRTT_DISABLE_VOICE_CALL,modem_sbp_config[104].SBP_1XRTT_DISABLE_VOICE_CALL,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable 1xRTT voice call.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01::enable<BR>0x00::disable,,,This feature can be enabled by compile option __1XRTT_DISABLE_VOICE_CALL__.,1xRTT,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] Try to do a voice call by 1xRTT<BR>[Expected Result] Fail to do the voice call,Pass,,,,
+5602,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_1XRTT_ENHANCE_AEHO,modem_sbp_config[55].SBP_1XRTT_ENHANCE_AEHO,OTA and OTA BY OP,no,no,no,yes,"Normally AEHO not opened in update overhead state. But in some NW, it may be frequently lost in this state. So we do this as the optimization. This SBP describes whether MS do this optimization or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Vzw MO/MT call,Pass,,,,
+5603,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_1XRTT_ENHANCE_SILENT_RETRY,modem_sbp_config[55].SBP_1XRTT_ENHANCE_SILENT_RETRY,OTA and OTA BY OP,no,no,no,yes,"If 1xRTT can not setup MO voice call successful in current system, 1x would try to acquire the more prefer CDMA system with SRSL(Silent Retry Scan List). If 1xRTT can not camp on any system when scan exhaust SRSL,It means there may be a poor signal region. Enable this feature and 1x will try to reacquire the lost system with system lost scan list, not the SRSL.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Vzw MO call test in poor signal,Pass,,,,
+5604,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_2G_CAP_FORCE_R9,modem_sbp_config[59].SBP_2G_CAP_FORCE_R9,OTA and OTA BY OP,no,no,no,yes,"During FT, we have found that some NW doesn't respond to ATTACH REQUEST if UE sends 2G capability in MS classmark3 later than Release 9 (based on GERAN_RELEASE_SUPPORT value). <BR>To overcome this case, we have provided this SBP so that UE can report 2G capability only till Release 9 (if SBP is TRUE).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Report 2G capability in Classmark 3 till Release 9<BR>0:Report 2G capability in Classmark 3 as per GERAN_RELEASE_SUPPORT,,,"Default value depends on compilation flag, __2G_CAP_FORCE_R9__, if this flag is defined, then default value 1 otherwise 0",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5605,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_2G_CUSTOMIZED_APC_ALG,modem_sbp_config[61].SBP_2G_CUSTOMIZED_APC_ALG,OTA and OTA BY OP,no,no,no,yes,"This feature is for customer self to customized the Anti Pesudo Cell algorithm in GAS custom file, then 2G will use this algorithm to check whether a cell is a Pesudo cell or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,Feature could be enabled by enabling compiler option __ENABLE_2G_CUSTOMIZED_APC_ALG__.,,,,,,Untested,,,,
+5606,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_2G_DISABLED_WITH_ECC_ALLOWED,modem_sbp_config[69].SBP_2G_DISABLED_WITH_ECC_ALLOWED,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, MD supports the functionality of 2G disabled with ECC allowed on 2G. When user disables 2G from UI, UE should not obtain 2G normal service. UI can still show "emergency call only" icon in 2G only environment. Emergency call can still be dialed via 2G NW.<BR>Triggered by AT+EGMC with configuring rat_disable_with_ecc.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5607,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_2G_FDD_FLIGHT_MODE_RETAIN_STORED_SI,modem_sbp_config[81].SBP_2G_FDD_FLIGHT_MODE_RETAIN_STORED_SI,OTA and OTA BY OP,no,no,no,yes,RRM will retain the Stored System Information list across Flight mode.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will retain Stored System Information across Flight mode<BR>0:GSM will not retain Stored System Information across Flight mode,,,Feature require compile option __GAS_STORED_SI_FEAT__ to be defined.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5608,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_2G_FDD_USE_STORED_SI,modem_sbp_config[81].SBP_2G_FDD_USE_STORED_SI,OTA and OTA BY OP,no,no,no,yes,RRM will be storing the System information of the camped on cell during cell selection. A Stored System Information List will be maintained in RRM. This Stored information will be re-used by in later Cell Selections.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will be using the Stored System Information list<BR>0:GSM will not be using the Stored System Information list,,,Feature require compile option __GAS_STORED_SI_FEAT__ to be defined.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5609,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_2G_PLMN_LIST_SPEED_MODE,modem_sbp_config[68].SBP_2G_PLMN_LIST_SPEED_MODE,OTA and OTA BY OP,no,no,no,yes,"If UE suffers from taking long time to perform PLMN List, this SBP is able to improve the speed when performing PLMN List on 2G; yet, it takes risk for the accuracy being lower.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Improve the speed for 2G PLMN List with lower accuracy.<BR>0:Disable. The UE would utilize original PLMN List mechanism.,,,"If __DISABLE_GAS_LIST_SPEED_MODE__ is defined, it would be disable by default; otherwise, enable.",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5610,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_2G_RXLEV_ACCESS_MIN,modem_sbp_config[55].SBP_2G_RXLEV_ACCESS_MIN,OTA and OTA BY OP,no,no,no,yes,"As per 3GPP TS45.008, GSM calculate C1 / C2 using the RXLEV_ACCESS_MIN as recieved in SI-3<BR>This feature allow customer to set the value of RXLEV_ACCESS_MIN in custom_gas_config.c file.<BR>MIN(customized RXLEVMIN, given RXLEVMIN by network in SI-3) will be used to calculate C1 / C2<BR>The major purpose of the customized C1 is to overcome those conditions with very high values of RXLEVMIN, e.g. -80dBm",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will use RXLEV_ACCESS_MIN based on customized value set.<BR>0:GSM will use RXLEV_ACCESS_MIN as obtained from network.,,,"Feature could be enabled by enabling compiler option __2G_CELL_SEL_ENHANCE__ and rebuild related libraries<BR>Then, user could use __ENABLE_2G_CELL_SEL_ENHANCE__ to swich the setting of this SBP to 1",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5611,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_2G_RXQUAL_MEAS_MODIFY_ENABLE_FDD,modem_sbp_config[64].SBP_2G_RXQUAL_MEAS_MODIFY_ENABLE_FDD,OTA and OTA BY OP,no,no,no,yes,"This SBP is to enable Measurement modification Algorithm based on Rxual received by GAS from 2G L1. The other values dependent in Measurement modification are from custom values defined in GAS custom file.<BR>When this SBP is enabled, Rxqual based Measurement modification Algorithm could be enabled.<BR>When this SBP is disabled, Rxqual based Measurement modification Algorithm could be enabled.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable Rxqual based Measurement modification Algorithm.<BR>0:Disable. By Default Disable Rxqual based Measurement modification Algorithm .,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5612,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_2G_SEND_ANY_CHANNEL_FOR_MT_CSFB,modem_sbp_config[96].SBP_2G_SEND_ANY_CHANNEL_FOR_MT_CSFB,OTA and OTA BY OP,no,no,no,yes,"During MT CSFB, if the mobile station is paged for a speech call or for any other CS service requiring a traffic<BR>channel, if the SBP is enable, then Mobile station sends Channel type as ANY CHANNEL other wise Channel type as TCH/H or TCH/F <BR>as per 3gpp specification.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Send Channel type on RACH as TCH/H or TCH/F for MT CSFB paging respose for CS<BR>0:Send Channel type on RACH as ANY CHANNEL for MT CSFB paging respose for CS,,,This feature is controlled by __2G_SEND_ANY_CHANNEL_FOR_MT_CSFB__ flag,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5613,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_3G3_PINGPONG_RESTRAIN,modem_sbp_config[94].SBP_3G3_PINGPONG_RESTRAIN,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5614,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_3G4_IRRDT_NO_CELL_SET_RAU_NOT_REQUIRED,modem_sbp_config[89].SBP_3G4_IRRDT_NO_CELL_SET_RAU_NOT_REQUIRED,OTA and OTA BY OP,no,no,no,yes,"For CMCC requirement, 3G4 IRRDT fail because 4G no cell, ERRC still report IRRDT success but with plmn loss reason, EMM pretend IR success, but we need check plmn loss reason to decide if pretend UE never come to LTE, so that UE can avoid doing RAU after back to 3G.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0: disable,1:enable",,,This feature can be enabled by compile option __3G4_IRRDT_NO_CELL_SET_RAU_NOT_REQUIRED__,MD Config,Modem - Customer Requirement,,,"[Prerequistes]UE with CMCC SIM card inserted and camp on TDS cell @CMCC XinJiang Province, Changji City<BR>[Operation steps]Using REF phone as MO, DUT is MT<BR>[Actual results]DUT could not receive MT call.<BR>[Expected results]DUT could receive MT call.",Pass,,,,
+5615,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_3G_CB_SERVICE_BY_PLMN,modem_sbp_config[1].SBP_3G_CB_SERVICE_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,This is a customizable feature. It can define that which PLMN has 3G CB service in table cb_service_plmn_table[] (customer_cb_service_by_plmn.c). This SBP can decide to enable/disable this customizable feature when RAT is 3G.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"[0,1]",,,This feature is controlled by __3G_CB_SERVICE_BY_PLMN__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5616,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_3G_CONTINUE_PLMN_SEARCH_IN_VIRTUAL_MODE,modem_sbp_config[91].SBP_3G_CONTINUE_PLMN_SEARCH_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"When enabled, 3G will not stop the ongoing full band PLMN search when moving to Virtual mode<BR>i.e. When PS data session starts on the peer SIM",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5617,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_3G_CSG,modem_sbp_config[10].SBP_3G_CSG,OTA and OTA BY OP,no,no,no,yes,This SBP item is designed for enabling 3G CSG femto-cell support. 3G CSG cell is described in 3GPP 25.304.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is enabled by the compile flag __3G_CSG__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5618,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_4G23_LOCAL_REL_IMS_PDN,modem_sbp_config[35].SBP_4G23_LOCAL_REL_IMS_PDN,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, SM(session management) module shall local release IMS PDN during 4G to 23G inter-RAT procedure. Otherwise, it keeps the PDN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Release of IMS PDN (when 4G to 23G inter-RAT) is enabled from SM module<BR>0:Release of IMS PDN (when 4G to 23G inter-RAT) is disabled from SM module,,,This feature is originally controlled by __SM_4G23_LOCAL_REL_IMS_PDN__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5619,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_4G3_FAST_REDIRECTION,modem_sbp_config[57].SBP_4G3_FAST_REDIRECTION,OTA and OTA BY OP,no,no,no,yes,"In some regions there happen to be stronger cells present than the cell redirected by NW at the time of redirection to 3G from LTE. This might result in radio link failure or other issues after the voice call is setup in 3G. When this SBP is disabled, 3G will discard the cell list sent in redirection info during CSFB call and scan for the strongest cell on the redirection UARFCN instead. This will help in continuing the call successfully in 3G after CSFB from LTE",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP is controlled by compile flag __DISABLE_4G3_FAST_REDIRECTION_FOR_CU__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5620,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_4G_BACKGROUND_SEARCH_OPTIMIZATION_3G,modem_sbp_config[27].SBP_4G_BACKGROUND_SEARCH_OPTIMIZATION_3G,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, 3G will not stop LTE background search when entering CELL_DCH or CELL_FACH.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,The setting of this SBP could be set to "enable" by defining compile option __4G_BACKGROUND_SEARCH_OPTIMIZATION__ in the makefile,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5621,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_ABNORMAL_ATT_TAU_EUTRAN_DISABLE_T3402,modem_sbp_config[41].SBP_ABNORMAL_ATT_TAU_EUTRAN_DISABLE_T3402,OTA and OTA BY OP,no,no,no,yes,"Upon expiry of T3402, ATT expect UE to be back on LTE. So, EUTRAN disable timer is adjusted to T3402 from network.<BR>If this SBP is enabled(applied on AT&T load), the duration for disable EUTRAN is set to the duration of T3402 when receiving attach or TAU abnormal.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5622,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_CONN_PROCEDURE,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_CONN_PROCEDURE,OTA and OTA BY OP,no,no,no,yes,"Enhance to accelerate emergency related procedure. By turning on SBP_ACCELERATE_EMC_PDN_CONN_PROCEDURE, NAS can abort activation procedure of emergency PDN connection earlier if it found the results is failure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE make VoLTE ECC call.<BR>[Test Step] <BR>UE fails to make VoLTE ECC call (nw does not reply EMC PDN connectivity request)<BR>[Expected Result]<BR>Emergency PDN CONNECTIVITY REQUEST, the timeout/retry limit is 1.",Pass,,,,
+5623,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_DISCONN_PROCEDURE,modem_sbp_config[37].SBP_ACCELERATE_EMC_PDN_DISCONN_PROCEDURE,OTA and OTA BY OP,no,no,no,yes,"Enhance to accelerate emergency related procedure. By turning on SBP_ACCELERATE_EMC_PDN_DISCONN_PROCEDURE, NAS can report deactivation procedure success (emergency PDN disconnect) earlier.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE make VoLTE ECC call success<BR>[Test Step] <BR>UE hangup a VoLTE ECC call.<BR>UE tries to send PDN disconnect request.<BR>NW does not response PDN disconnect request.<BR>[Expected Result]<BR>Emergency PDN DISCONNECTIVITY REQUEST, the timeout/retry limit is 1.",Pass,,,,
+5624,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_ACCESS_STRATUM_RELEASE,modem_sbp_config[97].SBP_ACCESS_STRATUM_RELEASE,OTA and OTA BY OP,no,no,no,yes,"This SBP when enabled will allow the UE to report AS releaseindicator as 9 except for <BR> networks mentioned in custom list which we report as release 11. <BR>If SBP is OFF , the behavior is vice vers. i.e report AS release 11 default and report AS release 9 for ones in custom list.",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable,,,NA,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5625,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_ACL_SUPPORT,modem_sbp_config[27].SBP_ACL_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"The feature is to support APN Control List (ACL) as specified in Clause 9.1.4 of TS 31.212. This EF_ACL contains the list of allowed APNs (Access Point Names). When the APN Control List service is enabled, the ME shall check that the entire APN of any PDP context is listed in EF_ACL before requesting this PDP context activation to the network. If the APN is not present in EF_ACL, the ME shall not request the corresponding PDP context activation to the network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,This SBP could be enabled by default using the compile option __ENABLE_ACL_SUPPORT__,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+5626,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_ADAPTIVE_PAGING_PERIOD_IN_UNACK_MODE,modem_sbp_config[5].SBP_ADAPTIVE_PAGING_PERIOD_IN_UNACK_MODE,OTA and OTA BY OP,no,no,no,yes,This feature enables MS to receive paging (for MT call) when performing GPRS/EDGE PS transmission with RLC unack mode. It is turned on by default. Turn off this feature if MS cannot complete PS transmission with RLC unack mode.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Adaptive Paging Period in UNACK MODE Enabled<BR>0:Adaptive Paging Period in UNACK MODE disabled,,,The feature is present under flag __ADAPTIVE_PAGING_PERIOD_IN_UNACK_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5627,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_AFR_FROM_4G_LOCAL_RELEASE_ENABLE,modem_sbp_config[93].SBP_AFR_FROM_4G_LOCAL_RELEASE_ENABLE,OTA and OTA BY OP,no,no,no,no,"The default value set in NVRAM is 0 but 1 in MCF.<BR>If the SIM PLMN is match, 4G will perform local release after specific timer.<BR>The PLMN match means the SIM PLMN is same as the i-th PLMN in NVRAM hierarchy<BR>nvram_ef_as_afr_struct->hplmn_afr_mapping->hplmn_afr_mapping[i]->plmnid<BR>And the local release timer will be set as <BR>nvram_ef_as_afr_struct->hplmn_afr_mapping->hplmn_afr_mapping[i]->afr_timer<BR><BR>When this SBP is set, if call ended and UE stay in 4G, UE may perform local release and perform AFR after a specific time defined in NVRAM. Otherwise, UE may stay in 4G connected and wait NW release.<BR><BR>If afr timer is 0, 4G will do local release immediately. If afr timer is 0xFF, 4G will not perform local release, and it will be same as disable local release.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE may perform local release after a specific time defined in NVRAM.<BR>0:Disabled. UE do not perform local release.,,,N/A,Auto Fast Return for NR,OP Requirement,,,Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+5628,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_CSFB,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_CSFB,OTA and OTA BY OP,no,no,no,no,"When this SBP is set, a CSFB is required before triggering an AFR to 4G. Otherwise, UE may trigger AFR even without a CSFB.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,N/A,Auto Fast Return for NR,OP Requirement,,,"Format: <BR> Test in machine (Y)<BR> Test Time (minutes) <BR> [Init] <BR>For test_SIM, you need step_1) + step_2)<BR>For normal_SIM, you need step_2)<BR><BR><BR>Step_1): Force TEST_MODE/TEST_SIM to be NORMAL_MODE/NORMAL_SIM.<BR>If you want to test AFR under TEST_MODE/TEST_SIM<BR>Set NVRAM_EF_TEST_SIM_LID<BR>1 = Force Normal SIM [select this]<BR>2 = Force Test SIM<BR><BR><BR>Step_2): Add SIM PLMN into AFR whitelist<BR>edit NVRAM: NVRAM_EF_AS_AFR_LID<BR>Add the SIM card PLMN_ID into hplmn_afr_mapping[x] (please refer to Note1)<BR>edit corresponding AFR capability control bit to True<BR> afr_2G4 = True<BR> afr_3G4 = True<BR> afr_2G5_FDD = True<BR> afr_2G5_TDD = True<BR> afr_3G5_FDD = True<BR> afr_3G5_TDD = True<BR> afr_4G5 = True<BR> afr_timer = 15<BR><BR> [Test Step] <BR> UE camp on 4G, (in idle)<BR> UE want to make MO call<BR> UE suffer RA feailure on 4G<BR> UE RatChange to 2/3G to proceed CC procedure for voice service.<BR> voice start and end at 2/3G.<BR> after voice service complete, 2/3G get RrcRel (without redirect_info)<BR> <BR> if SBP=TRUE, it means UE can only proceed AFR to highRAT(4G) if CSFB is existed.<BR> so...UE should stay in 2/3G<BR> <BR> if SBP=FALSE, it means UE can proceed AFR to highRAT(4G) if CSFB is not existed.<BR> so...UE AFR back to 4G <BR> <BR> [Expected Result]<BR> UE follow SBP value to proceed AFR to 4G.",Pass,,,,
+5629,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_SRVCC,modem_sbp_config[90].SBP_AFR_TO_4G_REQUIRE_SRVCC,OTA and OTA BY OP,no,no,no,no,"When this SBP is set, a SRVCC is required before triggering an AFR to 4G. Otherwise, UE may trigger AFR even without a SRVCC.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,N/A,Auto Fast Return for NR,OP Requirement,,,"Format: <BR> Test in machine (Y)<BR> Test Time (minutes) <BR> [Init] [you can also refer to attached file HowToSetNVRAM.docx]<BR>For test_SIM, you need step_1) + step_2)<BR>For normal_SIM, you need step_2)<BR><BR><BR>Step_1): Force TEST_MODE/TEST_SIM to be NORMAL_MODE/NORMAL_SIM.<BR>If you want to test AFR under TEST_MODE/TEST_SIM<BR>Set NVRAM_EF_TEST_SIM_LID<BR>1 = Force Normal SIM [select this]<BR>2 = Force Test SIM<BR><BR><BR>Step_2): Add SIM PLMN into AFR whitelist<BR>edit NVRAM: NVRAM_EF_AS_AFR_LID<BR>Add the SIM card PLMN_ID into hplmn_afr_mapping[x] (please refer to Note1)<BR>edit corresponding AFR capability control bit to True<BR> afr_2G4 = True<BR> afr_3G4 = True<BR> afr_2G5_FDD = True<BR> afr_2G5_TDD = True<BR> afr_3G5_FDD = True<BR> afr_3G5_TDD = True<BR> afr_4G5 = True<BR> afr_timer = 15<BR>================================================<BR><BR><BR> UE camp on 4G, (in idle)<BR> UE want to make MO call<BR> UE suffer RA feailure on 4G<BR> UE RatChange to 2/3G to proceed CC procedure for voice service.<BR> voice start and end at 2/3G.<BR> after voice service complete, 2/3G get RrcRel (without redirect_info)<BR> <BR> if SBP=TRUE, it means UE can only proceed AFR to highRAT(4G) if SRVCC is existed.<BR> so...UE should stay in 2/3G<BR> <BR> if SBP=FALSE, it means UE can proceed AFR to highRAT(4G) if SRVCC is not existed.<BR> so...UE AFR back to 4G <BR><BR><BR> <BR> [Expected Result]<BR> UE follow SBP value to proceed AFR to 4G.",Pass,,,,
+5630,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_AFR_TO_5G_REQUIRE_EPSFB,modem_sbp_config[90].SBP_AFR_TO_5G_REQUIRE_EPSFB,OTA and OTA BY OP,no,no,no,no,"When this SBP is set, an EPSFB is required before triggering an AFR to 5G. Otherwise, UE may trigger AFR even without an EPSFB.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,N/A,Auto Fast Return for NR,OP Requirement,,,"N/A, VoNR is not ready now",Untested,,,,
+5631,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_AFR_TO_5G_REQUIRE_SRVCC,modem_sbp_config[91].SBP_AFR_TO_5G_REQUIRE_SRVCC,OTA and OTA BY OP,no,no,no,no,"When this SBP is set, a SRVCC is required before triggering an AFR to 5G. Otherwise, UE may trigger AFR even without a SRVCC.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,N/A,Auto Fast Return for NR,OP Requirement,,,"N/A, VoNR is not ready now",Untested,,,,
+5632,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_ALIGN_CELL_RESELECTION_JUDGE,modem_sbp_config[34].SBP_ALIGN_CELL_RESELECTION_JUDGE,OTA and OTA BY OP,no,no,no,yes,"start 2G/3G reselection judge when 4G measuement are received.<BR>- This option will increase 4G occupy rate, but slow down IRAT reselection.<BR>- When SBP turns off, IRAT reslection procedure as usually.<BR>- When SBP turns on, IRAT reslection procedure will wait for LTE measurement result.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. IRAT reselection procedure will wait for LTE measurement result<BR>0:Disable. Do IRAT reselection procedure as usual,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5633,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_ALLOW_CSFB_FOR_DATAONLY,modem_sbp_config[30].SBP_ALLOW_CSFB_FOR_DATAONLY,OTA and OTA BY OP,no,no,no,yes,"This SBP is for data only device to process the MT CS services(ex: location services). If customer wants data only device to process the MT CS service, then this SBP should be opened.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Device will process the MT CS services<BR>0:Disabled. Device will not process the MT CS services,,,"if __DISABLE_CSCALL__ is TRUE, then user could use compile option __ALLOW_CSFB_FOR_DATAONLY__ to switch the setting of this SBP.",MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5634,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_ALLOW_EARLY_ROAMING_4G_FIRST,modem_sbp_config[63].SBP_ALLOW_EARLY_ROAMING_4G_FIRST,Not Support,no,no,no,yes,UE will trigger PLMN search when roaming 4G NW is found during stored frequency search.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,"This SBP can be controlled by __ALLOW_EARLY_ROAMING_4G_FIRST__. Simultaneously, __NWSEL_QUICK_SEARCH_FOR_ROAMING__ should also be turned on.",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+5635,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_ALLOW_EMC_PDN_WHEN_NW_REJ_CONN,modem_sbp_config[62].SBP_ALLOW_EMC_PDN_WHEN_NW_REJ_CONN,OTA and OTA BY OP,no,no,no,yes,Allow emergency PDN when Access barring is caused because NW reject connection.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Allow emergency PDN when Access barring is caused because NW reject connection.<BR>0:Disable. Don't allow emergency PDN when Access barring is caused because NW reject connection.,,,User could use compile option __SBP_ALLOW_EMC_PDN_WHEN_NEW_REJ_CONN__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5636,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_ALLOW_FAST_DORMANCY_DURING_VOICE_CALL,modem_sbp_config[40].SBP_ALLOW_FAST_DORMANCY_DURING_VOICE_CALL,OTA and OTA BY OP,no,no,no,yes,This feature is used to support triggering FastDormancy when PS data is not available even when voice call is ongoing.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is enabled by the compile flag __ALLOW_FD_DURING_VOICE_CALL__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5637,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ALLOW_NULL_APN_FOR_ADDITIONAL_PDN,modem_sbp_config[37].SBP_ALLOW_NULL_APN_FOR_ADDITIONAL_PDN,OTA and OTA BY OP,no,no,no,yes,"NULL APN is a acceptable APN to activate additional PDN connection from TS24.301 R13. By turning on SBP_ALLOW_NULL_APN_FOR_ADDITIONAL_PDN, UE is allowable to use NULL APN to activate additional PDN connection.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:disable<BR>bit 1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE attachs to LTE<BR>[Test Step] <BR>UE could activate additional PDN connection without assiging APN (with NULL APN)<BR>[Expected Result]<BR>UE could activate additional PDN connection without assiging APN (with NULL APN),Pass,,,,
+5638,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_ALLOW_PDP_ACTIVATION_TRIGGER_23G_GMM_ATTACH,modem_sbp_config[61].SBP_ALLOW_PDP_ACTIVATION_TRIGGER_23G_GMM_ATTACH,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to control whether 23g PDP context activation procedure tirggers PS attachment procedure in PS non-attach state<BR>If this SBP is ON : PDP context activation procedure will trigger PS attachment procedure in 23G PS non-attach state<BR>If this SBP is OFF : PDP context activation procedure will not trigger PS attachment procedure in 23G PS non-attach state, and the PDP context activation would fail.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Allow PDP context activation procedure triggers PS attachment procedure in 23G PS non-attach state<BR>0:Not allow PDP context activation procedure triggers PS attachment procedure in 23G PS non-attach state,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5639,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_ALLOW_PDP_ACT_OVER_NEW_CONNECTION_WHEN_RAU_FOR_FALSE,modem_sbp_config[99].SBP_ALLOW_PDP_ACT_OVER_NEW_CONNECTION_WHEN_RAU_FOR_FALSE,OTA,no,no,no,yes,"When UE is in 3G,In sceanrio where there is an pending PDP activation request and GMM RAU has be performed with FOR bit set to false.<BR>After GMM RAU Accept from NW, the PDP activation from SM shall be processed only after the PS signaling connection or RRC connection is <BR>released from NW.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Allow PDP to activate on existing RRC connection<BR>0x1:Allow PDP Activation on new RRC connection when RAU was performed with FOR bit FALSE,,,This feature can be disabled by compile option __DISABLE_PDP_ACT_OVER_NEW_CONNECTION_WHEN_RAU_FOR_FALSE__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] <BR>1. Trigger CS and PS registration in 3G<BR>2. Trigger RAU with FOR as 0<BR>3. Trigger PDP activation as well<BR>4. Observe that PDP activation should happen over new RRC connection<BR>[Expected Result]<BR>Observe that PDP activation should happen over new RRC connection,Pass,,,,
+5640,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_ALLOW_PDP_ACT_OVER_NEW_RRC_CONNECTION,modem_sbp_config[92].SBP_ALLOW_PDP_ACT_OVER_NEW_RRC_CONNECTION,OTA,no,no,no,yes,This SBP feature option is to PDP to activate on new RRC connection,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Allow PDP to activate on either new RRC connection or existing RRC connection<BR>0x1:Allow PDP to activate on new RRC connection always,,,This feature can be enabled by compile option __ALLOW_PDP_ACT_OVER_NEW_RRC_CONNECTION__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G<BR>->Trigger PDP activation <BR>[Expected Result]<BR>Observe that PDP activation will be triggered over new RRC connection,Pass,,,,
+5641,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_ALLOW_REGISTRATION_FOR_PPAC_RESTRICTION,modem_sbp_config[26].SBP_ALLOW_REGISTRATION_FOR_PPAC_RESTRICTION,OTA and OTA BY OP,no,no,no,yes,"Allow Registration when PPAC(Paging Permission Access control) is restricted for PS and requested domain is CS OR when PPAC(Paging Permission Access control) is restricted for CS and requested domain is PS.<BR>If SBP is enabled, Allow Registration when PPAC(Paging Permission Access control) is restricted for PS and requested domain is CS or when PPAC(Paging Permission Access control) is restricted for CS and requested domain is PS.<BR>If SBP is not enabled, Registration is not allowed when PPAC(Paging Permission Access control) is restricted",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If SBP is enabled, Allow Registration when PPAC(Paging Permission Access control) is restricted for PS and requested<BR>0:If SBP is not enabled, Registration is not allowed when PPAC(Paging Permission Access control) is restricted<BR>domain is CS or when PPAC(Paging Permission Access control) is restricted for CS and requested domain is PS",,,"To enable this feature, compile option __ALLOW_REGISTRATION_FOR_PPAC_RESTRICTION__ must be defined",MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+5642,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_ALLOW_SIM_REFRESH_RESET_WHEN_IN_CALL,modem_sbp_config[8].SBP_ALLOW_SIM_REFRESH_RESET_WHEN_IN_CALL,Not Support,no,no,no,yes,"With the feature enabled, the device will perform UICC RESET REFRESH during a call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If the feature is enabled and UICC RESET type of REFRESh is received, the device is no need to re-issue the command following with SBP_SAT_REISSUE_REFRESH_AFTER_CALL_END.<BR>The setting of this SBP could be set to "enable" by defining __ALLOW_SIM_REFRESH_RESET_WHEN_IN_CALL__ in the makefile.",SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5643,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_ALWAYS_TRIGGER_IVSR_AFTER_POWER_ON,modem_sbp_config[57].SBP_ALWAYS_TRIGGER_IVSR_AFTER_POWER_ON,OTA and OTA BY OP,no,no,no,yes,"A requirement from customer, as the experience of previous projects, UE may receive a reject cause of SIM invalid when first turn-on or flight-mode-off. It is possible that UE would recover from invalid SIM state for 1st turn-on or flight-mode-off case.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5644,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_AMR_WB_GSM,modem_sbp_config[7].SBP_AMR_WB_GSM,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable AMR-WB codec in GSM.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This SBP could be enabled by defining the compile option __AMR_WB_GSM__ in the makefile,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5645,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_AMR_WB_UMTS,modem_sbp_config[7].SBP_AMR_WB_UMTS,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable AMR-WB codec in UMTS.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5646,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_APPLMN_LIST,modem_sbp_config[16].SBP_APPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"For Amazon requirement, to append predefined PLMN in NVRAM for PLMN search list. UE will search thoses PLMNs after the OPLMN(Operator Contolled PLMN).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __MM_ENABLE_APPLMN_LIST__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5647,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_APPLY_DEFAULT_VALUE_FOR_BACKOFF_TIMER,modem_sbp_config[64].SBP_APPLY_DEFAULT_VALUE_FOR_BACKOFF_TIMER,OTA and OTA BY OP,no,no,no,yes,"The SBP controls whether to apply the default value (12 minutes) for the back-off timer in some cases specified in both TS24.301 and TS24.008, like the UE receives ESM/SM cause #8/#27/#32/#33 in the PDN CONNECTIVITY REJECT where the back-off timer IE is not included by NW. If the SBP is on, the UE will apply it; otherwise, the UE will not apply it.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,"if compile option __APPLY_DEFAULT_VALUE_FOR_BACKOFF_TIMER__ is defined, the SBP is enabled",LTE Protocol (R13 Baseline),4G,,,Legacy Feature,Pass,,,,
+5648,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_APPLY_OR_LOGIC_FOR_EAB_LOW_PRIORITY_OVERRIDE,modem_sbp_config[88].SBP_APPLY_OR_LOGIC_FOR_EAB_LOW_PRIORITY_OVERRIDE,OTA and OTA BY OP,no,no,no,yes,"This SBP feature decides whether apply OR logic for EAB(Exteneded Access Barring)/Low Priority and their override. That is if one of the EAB/Low Priority is true, then both will be taken as true when this SBP is enabled. And if one of the EAB/Low Priority override is true, then both will be taken as true when this SBP is enabled. According to 3GPP 23.060 5.3.13.3, only all these(EAB(Exteneded Access Barring)/Low Priority and their override) are supported then a device is considered as dual priority device. However, some GCF test script may not be well designed by machine vendor, and requires a device to be considered as dual priority device even above condition isn't fulfilled. Hence, this SBP is introduced to workaround such script issue.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5649,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_AP_SUPPORTS_MULTIPLE_PS,modem_sbp_config[43].SBP_AP_SUPPORTS_MULTIPLE_PS,Not Support,no,no,no,no,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,NA,,,,MD Config,Modem - Customer Requirement,,,NA,Untested,,,,
5650,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_ASSIGN_MRU0_IF_EMPTY,modem_sbp_config[51].SBP_ASSIGN_MRU0_IF_EMPTY,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuremap the first entry of PRL to MRU[0]bit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5651,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_ATCI_QUEUE_AT,modem_sbp_config[14].SBP_ATCI_QUEUE_AT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureQueue AT command in modembit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,Check AT command can be processed normally,Untested,,,,
-5652,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_ATNT_HPPLMN_SEARCH,modem_sbp_config[1].SBP_ATNT_HPPLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePerform background search to higher priority PLMNs and treat north America MCCs are in the same country.bit 0:0:Disabled. Not treat north America MCCs as in the same countrybit 1:1:Enabled. Treat north America MCCs as in the same country",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5653,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_ATTACH_REJ_19_START_T3402,modem_sbp_config[36].SBP_ATTACH_REJ_19_START_T3402,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurestart T3402 after UE receives ATTACH reject #19bit 0:0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19bit 1:1:Enabled. UE will set attach attempt counter to MAX and start T3402 when UE receives an ATTACH reject with cause #19",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will set attach attempt counter to MAX and start T3402 when UE receives an ATTACH reject with cause #19.<BR>0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19.,,,__ATTACH_REJ_19_START_T3402__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5654,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ATT_REJ_19_MAXIMUM_3,modem_sbp_config[37].SBP_ATT_REJ_19_MAXIMUM_3,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet the maximum attempt counter for ATTACH reject #19 as 3bit 0:0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19bit 1:1:Enabled. UE has only 3 times chances to receive ATTACH reject with cause #19",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE has only 3 times chances to receive ATTACH reject with cause #19.<BR>0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19.,,,__ATT_REJ_19_MAXIMUM_3__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5655,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_AT_ME_IDENTIFICATION_WITHOUT_HEADER,modem_sbp_config[4].SBP_AT_ME_IDENTIFICATION_WITHOUT_HEADER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis feature is used to display prefix string of intermediate result of AT+CGMM,AT+CGMR and AT+CGMI commandbit 0:0:Disable ME identification without HEADERbit 1:1:Enable ME identification without HEADER",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5656,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_AUTO_RESEL_ONLY_WHEN_NO_SERVICE,modem_sbp_config[19].SBP_AUTO_RESEL_ONLY_WHEN_NO_SERVICE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAuto reselection only when no service or limited service.bit 0:0:Disabled. Perform auto reselection without checking service statebit 1:1:Enabled. Perform auto reselection only when no/limited service",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-5657,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_AVOID_PS_DETACH_WHEN_EUTRAN_DISABLED,modem_sbp_config[25].SBP_AVOID_PS_DETACH_WHEN_EUTRAN_DISABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIf this feature is enabled, UE will not perform PS detach in set RAT mode procedure if E-UTRAN is disabled.bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Disabled. UE will perform PS detach if set RAT procedure happens after E-UTRAN disabled.<BR>1:Enabled.UE will NOT perform PS detach if set RAT procedure happens after E-UTRAN disabled, so reselection to UTRAN can success.",,,__AVOID_PS_DETACH_WHEN_EUTRAN_DISABLED__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5658,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_AVOID_SERVICE_CHANGE_TIMER_DURING_POWEROFF_DETACH,modem_sbp_config[59].SBP_AVOID_SERVICE_CHANGE_TIMER_DURING_POWEROFF_DETACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature To avoid Service Change Timer during Power off detachbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE runs Service Change Timer after GMM DETACH procedure is completed to keep the TBF alive in 2G.<BR>1:UE avoid Service Change Timer during Power off detach in 2G.This will help to indicate early detach indication to upper layers.,,,__SBP_START_SERVICE_CHANGE_TIMER_DURING_POWEROFF_DETACH__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) :10 mins <BR> [Init] :UE register with Network<BR> [Test Step] Perform Power off UE<BR> [Expected Result] UE is expected to perform Power off early,Pass,,,,
-5659,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_BAND_SCAN_PRIORITY,modem_sbp_config[35].SBP_BAND_SCAN_PRIORITY,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureStrict LTE Frequency/Band Scan by Prioritybit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5660,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_BAND_SCAN_PRIORITY_BY_HPLMN,modem_sbp_config[88].SBP_BAND_SCAN_PRIORITY_BY_HPLMN,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureStrict LTE Frequency/Band Scan by Priority according to HPLMN in SIMbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5661,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_BAR_CELL_FOR_CONN_FAIL,modem_sbp_config[81].SBP_BAR_CELL_FOR_CONN_FAIL,OTA and OTA BY OP,no,no,no,yes,To BAR abnormal cell by counting T300 timeout or RRC connection reject,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:bar cell mechanism for abnormal cell is not activated.<BR>0:bar cell mechanism for abnormal cell is activated.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5662,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_BAR_CEL_NW_REJ_W_WAIT_TIME,modem_sbp_config[97].SBP_BAR_CEL_NW_REJ_W_WAIT_TIME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurebar cell which send multiple RRC Rej with wait timebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,LTE Protocol (R13 Baseline),4G,,,Test in machine (Y/N) : Y <BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Receive RRC reject with wait time<BR> [Expected Result]<BR>Bar the Cell,Pass,,,,
-5663,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_BAR_DATA_ROAMING,modem_sbp_config[52].SBP_BAR_DATA_ROAMING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBar data service in roaming NW. 0 Not enabled bar data service in roaming NW feature;1 Enabled bar data service in roaming NW feature.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,,MD Config,Modem - Customer Requirement,,,SPRINT data roaming test,Pass,,,,
-5664,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_BAR_FTA_CELL_IN_SBY,modem_sbp_config[67].SBP_BAR_FTA_CELL_IN_SBY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRemove ForbiddenTA baring cell from standby measure Indbit 0:0:Not remove ForbiddenTA baring cell from standby measure Indbit 1:1:Remove ForbiddenTA baring cell from standby measure Ind",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Remove ForbiddenTA baring cell from standby measure Ind<BR>0:Not remove ForbiddenTA baring cell from standby measure Ind,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5665,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_BEFORE_RINGING_CSFB,modem_sbp_config[24].SBP_BEFORE_RINGING_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuremake MO call in CS domain before ringingbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Pass,,,,
-5666,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_BG_SEARCH_2G4_FDD,modem_sbp_config[5].SBP_BG_SEARCH_2G4_FDD,OTA and OTA BY OP,no,no,no,yes,"In some 2G/3G live network, The network may not broadcast the LTE neighbor cell list in system information block,<BR> In this condition, the UE may not back to LTE RAT via 2G4/3G4 IRCR. So LTE background search feature is used to overcome<BR> this condition and let UE still can back to LTE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE does not support 4G background search in 2G<BR>0:UE supports 4G background search in 2G,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5667,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_BG_SEARCH_2G4_TDD,modem_sbp_config[5].SBP_BG_SEARCH_2G4_TDD,Not Support,no,no,no,yes,Configuration of SBP Feature2G TDD to LTE Background Search Enabled bit 0:0:Not Supportedbit 1:1:Supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-5668,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_2G5_FDD,modem_sbp_config[92].SBP_BG_SEARCH_2G5_FDD,OTA and OTA BY OP,no,no,no,yes,"In some 2G/3G live network, The network may not broadcast the 5G neighbor cell list in system information block,<BR> In this condition, the UE may not back to LTE RAT via 2G5/3G5 IRCR. So NR background search feature is used to overcome<BR> this condition and let UE still can back to NR.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE does not support 5G background search in 2G<BR>0:UE supports 5G background search in 2G,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5669,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_2G5_TDD,modem_sbp_config[92].SBP_BG_SEARCH_2G5_TDD,Not Support,no,no,no,yes,Configuration of SBP Feature2G TDD to 5G Background Search Enabled bit 0:0:Not Supportedbit 1:1:Supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,Background search on NR,OP Requirement,,,,Untested,,,,
-5670,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_BG_SEARCH_3G4_FDD,modem_sbp_config[5].SBP_BG_SEARCH_3G4_FDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to configure BG search on 4G while on 3G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5651,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_ATCI_QUEUE_AT,modem_sbp_config[14].SBP_ATCI_QUEUE_AT,Not Support,no,no,no,yes,"This feature is used to queue the received AT command during the previous one is still processed in the same channel. After the previous command is finished, modem will deque and process the new AT command.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,Check AT command can be processed normally,Untested,,,,
+5652,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_ATNT_HPPLMN_SEARCH,modem_sbp_config[1].SBP_ATNT_HPPLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,This SBP allows UE to perform background search to higher priority PLMNs and treat North America MCC are in the same country.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __ATNT_HPPLMN_SEARCH__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5653,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_ATTACH_REJ_19_START_T3402,modem_sbp_config[36].SBP_ATTACH_REJ_19_START_T3402,OTA and OTA BY OP,no,no,no,yes,"For some NW, it may expected that UE shall start T3402 right after UE receives an ATTACH reject with cause #19.<BR>MTK provides a workaround solution. If this SBP is enabled and UE receives an ATTACH reject with cause #19, UE will set the attach attempt counter to MAX(5) and start T3402.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will set attach attempt counter to MAX and start T3402 when UE receives an ATTACH reject with cause #19.<BR>0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19.,,,User could use compile option __ATTACH_REJ_19_START_T3402__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5654,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_ATT_REJ_19_MAXIMUM_3,modem_sbp_config[37].SBP_ATT_REJ_19_MAXIMUM_3,OTA and OTA BY OP,no,no,no,yes,"For some NW, it may expected that UE shall only retry ATTACH 3 times when UE received the ATTACH reject with cause #19.<BR>MTK provides a workaround solution. If this SBP is enabled and UE receives an ATTACH reject with cause #19, UE will only retry ATTACH 3 times which means UE will see the maximum of the attach attemp counter for ATTACH reject with cause #19 as 3.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE has only 3 times chances to receive ATTACH reject with cause #19.<BR>0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19.,,,User could use compile option __ATT_REJ_19_MAXIMUM_3__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5655,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_AT_ME_IDENTIFICATION_WITHOUT_HEADER,modem_sbp_config[4].SBP_AT_ME_IDENTIFICATION_WITHOUT_HEADER,OTA and OTA BY OP,no,no,no,yes,"This feature is used to display prefix string of intermediate result of AT+CGMM,AT+CGMR and AT+CGMI command (It will display +CGMM,+CGMR and +CGMI as prefix in result)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature is controlled by __AT_ME_IDENTIFICATION_WITHOUT_HEADER__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5656,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_AUTO_RESEL_ONLY_WHEN_NO_SERVICE,modem_sbp_config[19].SBP_AUTO_RESEL_ONLY_WHEN_NO_SERVICE,Not Support,no,no,no,yes,The optimization is to prevent user to trigger auto reselection mistakenly while roaming. DUT would perform auto reselection action only when in no service or limited service state.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is controlled by __AUTO_RESEL_ONLY_WHEN_NO_SERVICE__.,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5657,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_AVOID_PS_DETACH_WHEN_EUTRAN_DISABLED,modem_sbp_config[25].SBP_AVOID_PS_DETACH_WHEN_EUTRAN_DISABLED,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, UE will not perform PS detach in set RAT mode procedure if E-UTRAN is disabled.<BR>In MTK's current design, set RAT procedure follows the suggestion in 5.5.3.2.1 of 3GPP TS 24.301.<BR>- A UE can indicate change in the UE's E-UTRAN capabilities to the network by performing a detach and then a re-attach.<BR><BR>In the case of set RAT procedure happening after E-UTRAN disabled, there is no need to perform such PS detach since network is already informed about E-UTRAN capabilites. If the PS detach is still be performed, it will let the reselection to UTRAN fail. Hence, this SBP feature is introduced.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Disabled. UE will perform PS detach if set RAT procedure happens after E-UTRAN disabled.<BR>1:Enabled.UE will NOT perform PS detach if set RAT procedure happens after E-UTRAN disabled, so reselection to UTRAN can success.",,,This SBP option is enabled by compile option __AVOID_PS_DETACH_WHEN_EUTRAN_DISABLED__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5658,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_AVOID_SERVICE_CHANGE_TIMER_DURING_POWEROFF_DETACH,modem_sbp_config[59].SBP_AVOID_SERVICE_CHANGE_TIMER_DURING_POWEROFF_DETACH,OTA and OTA BY OP,no,no,no,yes,"To avoid Service Change Timer during Power off detach in 2G.This will help to indicate early detach indication to upper layers. By default, UE runs this timer after GMM DETACH procedure is completed to keep the TBF alive in 2G.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE runs Service Change Timer after GMM DETACH procedure is completed to keep the TBF alive in 2G.<BR>1:UE avoid Service Change Timer during Power off detach in 2G.This will help to indicate early detach indication to upper layers.,,,"To enable this feature, compile option __SBP_START_SERVICE_CHANGE_TIMER_DURING_POWEROFF_DETACH__ must be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) :10 mins <BR> [Init] :UE register with Network<BR> [Test Step] Perform Power off UE<BR> [Expected Result] UE is expected to perform Power off early,Pass,,,,
+5659,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_BAND_SCAN_PRIORITY,modem_sbp_config[35].SBP_BAND_SCAN_PRIORITY,OTA and OTA BY OP,no,no,no,no,"This SBP is used to scan LTE frequency/band by priority strictly.<BR>When cell selection on LTE, UE will try to scan stored frequencies first. If UE can not find suitable cell on stored frequencies, then UE will try to scan all supported bands.<BR>If LTE Priority Band is set, UE will apply priority band order to scan band.<BR>When this SBP is enabled, UE will also apply priority band order to scan stored frequencies, that is, UE will select the cell that belongs to highest priority band that UE can find, but the cell may be not the strongest cell.<BR>When this SBP is disabled, UE will select a strongest cell when scan stored frequencies regardless of priority band order.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,Also need to set LTE Priority Band in NVRAM.User could use compile option __BAND_SCAN_PRIORITY__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5660,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_BAND_SCAN_PRIORITY_BY_HPLMN,modem_sbp_config[88].SBP_BAND_SCAN_PRIORITY_BY_HPLMN,OTA and OTA BY OP,no,no,no,no,"This SBP is used to scan LTE frequency/band by priority strictly according to HPLMN in SIM.<BR>When cell selection on LTE, UE will try to scan stored frequencies first.<BR>If UE can not find suitable cell on stored frequencies, then UE will try to scan all supported bands.<BR>If LTE Priority Band is set, UE will apply priority band order to scan band.<BR>When this SBP is enabled, UE will also apply priority band order to scan stored frequencies, that is, UE will select the <BR>cell that belongs to highest priority band that UE can find, but the cell may be not the strongest cell.<BR>When this SBP is disabled, UE will select a strongest cell when scan stored frequencies regardless of priority band order.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,Also need to set LTE Priority Band in NVRAM.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5661,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_BAR_CELL_FOR_CONN_FAIL,modem_sbp_config[81].SBP_BAR_CELL_FOR_CONN_FAIL,OTA and OTA BY OP,no,no,no,yes,"For abnormal cell that do not answer RRC connection request or reject RRC connection request, LTE RRC will bar the cell when the abnormal scenario happened too many times. The counting value is reset when receiving RRC connection setup.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:bar cell mechanism for abnormal cell is not activated.<BR>0:bar cell mechanism for abnormal cell is activated.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5662,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_BAR_CEL_NW_REJ_W_WAIT_TIME,modem_sbp_config[97].SBP_BAR_CEL_NW_REJ_W_WAIT_TIME,OTA and OTA BY OP,no,no,no,yes,"UE will bar the cell which sends multiple RRCConnectionReject with wait time.<BR><BR>According to TS36.331, the T302 should be set to the wait time.<BR>When T302 is running, UE should not establish connection to this cell.<BR>Then, UE will retry the connection after T302 expires.<BR><BR>However, the cell may keep sending RRC Connection Reject with wait time makes UE suffering from the establish failure for a long time.<BR>If UE continues to camp on this cell, the service cannot be proceeded result in poor user experience.<BR><BR>We design a mechanism to detect this scenario and bar such cell for a short time.<BR>UE could attempt to establish connection with another cell.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,NA,LTE Protocol (R13 Baseline),4G,,,Test in machine (Y/N) : Y <BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Receive RRC reject with wait time<BR> [Expected Result]<BR>Bar the Cell,Pass,,,,
+5663,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_BAR_DATA_ROAMING,modem_sbp_config[52].SBP_BAR_DATA_ROAMING,OTA and OTA BY OP,no,no,no,yes,This SBP to control enable/disable bar data service in roaming NW. The device must prevent any origination of data calls when it is on a roaming system that data roaming is not allowed. The device must not propose or negotiate eHRPD session while in a roaming network identified by the roaming indicators in the PRL;,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,N/A,MD Config,Modem - Customer Requirement,,,SPRINT data roaming test,Pass,,,,
+5664,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_BAR_FTA_CELL_IN_SBY,modem_sbp_config[67].SBP_BAR_FTA_CELL_IN_SBY,OTA and OTA BY OP,no,no,no,yes,"When this SBP is turn on, the standby LTE would not report the active RAT with the measurement results of barred cells with cause Forbidden-TA.<BR>- If standby LTE does not report barred Forbidden-TA cells to active RAT, the UE would not reselect to this LTE barred cell (and be rejected again).",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Remove ForbiddenTA baring cell from standby measure Ind<BR>0:Not remove ForbiddenTA baring cell from standby measure Ind,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5665,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_BEFORE_RINGING_CSFB,modem_sbp_config[24].SBP_BEFORE_RINGING_CSFB,OTA and OTA BY OP,no,no,no,yes,"If LTE network quality is not good enough, MO call will be made in CS domain before ringing.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,"To enable this feature, user need to define compile option __BCSFB__ and rebuild all related libraries",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Pass,,,,
+5666,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_BG_SEARCH_2G4_FDD,modem_sbp_config[5].SBP_BG_SEARCH_2G4_FDD,OTA and OTA BY OP,no,no,no,yes,"In some 2G/3G live network, The network may not broadcast the LTE neighbor cell list in system information block, In this condition, the UE may not back to LTE RAT via 2G4/3G4 IRCR. So LTE background search feature is used to overcome this condition and let UE still can back to LTE.<BR>So this SBP value is used to control the LTE background search enable/disable for various 2/3G RAT/mode. When this SBP's value is 1, it means UE supports 4G background search in 2G When this SBP's value is 0, it means UE doesn't support 4G background search in 2G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE does not support 4G background search in 2G<BR>0:UE supports 4G background search in 2G,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5667,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_BG_SEARCH_2G4_TDD,modem_sbp_config[5].SBP_BG_SEARCH_2G4_TDD,Not Support,no,no,no,yes,"In some 2G live network, The network may not broadcast the LTE neighbor cell list in system information block, In this condition, the UE may not back to LTE RAT via 2G4 IRCR. So LTE background search feature is used to overcome this condition and let UE still can back to LTE.<BR>So this SBP value is used to control the LTE background search enable/disable for various 2G RAT/mode. When this SBP's value is 1, it means UE supports 4G background search in 2G When this SBP's value is 0, it means UE doesn't support 4G background search in 2G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5668,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_2G5_FDD,modem_sbp_config[92].SBP_BG_SEARCH_2G5_FDD,OTA and OTA BY OP,no,no,no,yes,"In 2G/3G live network, as spec doesn't define network can not broadcast the 5G neighbor cell list.<BR>In this condition, the UE may not back to 5G RAT via 2G5/3G5 IRCR. So 5G background search feature is used to overcome<BR>this condition and let UE still can back to 5G.<BR>So this SBP value is used to control the 5G background search enable/disable for various 2/3G RAT/mode.<BR>When this SBP's value is 1, it means UE supports 5G background search in 2G<BR>When this SBP's value is 0, it means UE doesn't support 5G background search in 2G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE does not support 5G background search in 2G<BR>0:UE supports 5G background search in 2G,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5669,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_2G5_TDD,modem_sbp_config[92].SBP_BG_SEARCH_2G5_TDD,Not Support,no,no,no,yes,"In 2G/3G live network, as spec doesn't define network can not broadcast the 5G neighbor cell list.<BR>In this condition, the UE may not back to 5G RAT via 2G5/3G5 IRCR. So 5G background search feature is used to overcome<BR>this condition and let UE still can back to 5G.<BR>So this SBP value is used to control the 5G background search enable/disable for various 2/3G RAT/mode.<BR>When this SBP's value is 1, it means UE supports 5G background search in 2G<BR>When this SBP's value is 0, it means UE doesn't support 5G background search in 2G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,Background search on NR,OP Requirement,,,,Untested,,,,
+5670,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_BG_SEARCH_3G4_FDD,modem_sbp_config[5].SBP_BG_SEARCH_3G4_FDD,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, When the Network does not broadcast SIB19 or the SIB19 does not contain any LTE neighbors, UE will search for LTE network in the background",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
5671,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_BG_SEARCH_3G4_TDD,modem_sbp_config[5].SBP_BG_SEARCH_3G4_TDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature3G TDD to LTE Background Search Enabled bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,TSDCDMA_HSPA Protocol (R8 Baseline),3G,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5672,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_3G5_FDD,modem_sbp_config[92].SBP_BG_SEARCH_3G5_FDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to search 5G background search in 3G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5672,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_3G5_FDD,modem_sbp_config[92].SBP_BG_SEARCH_3G5_FDD,OTA and OTA BY OP,no,no,no,yes,"In 2G/3G live network, as spec doesn't define network can not broadcast the 5G neighbor cell list.<BR>In this condition, the UE may not back to 5G RAT via 2G5/3G5 IRCR. So 5G background search feature is used to overcome<BR>this condition and let UE still can back to 5G.<BR>So this SBP value is used to control the 5G background search enable/disable for various 2/3G RAT/mode.<BR>When this SBP's value is 1, it means UE supports 5G background search in 3G<BR>When this SBP's value is 0, it means UE doesn't support 5G background search in 3G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
5673,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_3G5_TDD,modem_sbp_config[92].SBP_BG_SEARCH_3G5_TDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature3G TDD to 5G Background Search Enabled bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,TSDCDMA_HSPA Protocol (R8 Baseline),3G,,,[Test Step]<BR>Not need test,Pass,,,,
-5674,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_4G5,modem_sbp_config[92].SBP_BG_SEARCH_4G5,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]This feature enables UE to perform 5G background search while in 4G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5675,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_BLACK_CELL_LIST,modem_sbp_config[31].SBP_BLACK_CELL_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBlack cell list enhancementbit 0:0:User can not use edit black cell list by inject messagebit 1:1:User can use edit black cell list by inject message",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:User can use edit black cell list by inject message<BR>0:User can not use edit black cell list by inject messagebit,,,__BLACK_CELL_LIST__,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5676,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_BLIND_FR_2G_TDD,modem_sbp_config[65].SBP_BLIND_FR_2G_TDD,Not Support,no,no,no,yes,Configuration of SBP FeatureWhether blind FR for 2G TDD is activatedbit 0:0:Not enabledbit 1:1:Enabled,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-5677,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_BOT_PRESENT_RAI_ABSENT,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_BOT_PRESENT_RAI_ABSENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to forcely add EPLMN list into the scope of back-off timer for ESM/SM cause values #8/#27/#32/#33 if NW does not include Re-attempt indicator IEbit 0:0:Do not add EPLMN list into the scope of back-off timer if the network does not include Re-attempt indicator for causes #8/#27/#32/#33.bit 1:1:Add EPLMN list into the scope of back-off timer if the network does not include Re-attempt indicator for causes #8/#27/#32/#33.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,LTE Protocol (R13 Baseline),4G,,,Legacy Feature,Pass,,,,
-5678,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_RAI_ABSENT,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_RAI_ABSENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to forcely add EPLMN list into the scope of back-off timer for ESM/SM cause values #50/#51 if NW does not include Re-attempt indicator IEbit 0:0:Do not add EPLMN list into the scope of back-off timer if the network does not include Re-attempt indicatorbit 1:1:Add EPLMN list into the scope of back-off timer if the network does not include Re-attempt indicator.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-5679,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_BLOCK_ILLEGAL_ME,modem_sbp_config[96].SBP_BLOCK_ILLEGAL_ME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature to enable block illegal ME feature bit <BR>purpose: block the ME once the IMEI/MEID is illegal<BR>timing: network registration<BR>how to use: control the bit",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y) <BR> Test Time (30) <BR> [Init] modify the UE's IMEI of SIM1 to a illegal value, keep SIM2 IMEI as valid value<BR> [Test Step] network regsitration of SIM1, get reject. check if SIM2 does not have service as well.<BR> [Expected Result] can not attach normal of both SIM cards",Pass,,,,
-5680,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_C2K_1X_FAST_TIMING_TRACKING_FEATURE,modem_sbp_config[94].SBP_C2K_1X_FAST_TIMING_TRACKING_FEATURE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurefast timing trackingbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,1xRTT,3G,,,Test in machine (Y) <BR>Test Time (10 minutes) <BR>[Init] C2K mode<BR>[Test Step] 1. set 0 or 1<BR> 2. 1xRTT call setup<BR>[Expected Result] 1xRTT call not drop,Pass,,,,
-5681,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_C2K_COMBINED_LOCATION_INFO,modem_sbp_config[43].SBP_C2K_COMBINED_LOCATION_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCombine final location information for SIM location event update optimizationbit 0:0:Disable combine final location information for SIM location event updatebit 1:1:Enable combine final location information for SIM location event update optimization",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5682,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_C2K_ECC_NOT_TO_SEND_ESR_FOR_SPECIFIC_OPERATOR,modem_sbp_config[62].SBP_C2K_ECC_NOT_TO_SEND_ESR_FOR_SPECIFIC_OPERATOR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature For C2K emergency call, not to send ESR for specific operatorsbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Send EXTENDED SERVICE REQUEST for C2K emergency call.<BR>0:Disable. Do not send EXTENDED SERVICE REQUEST for C2K emergency call for specfic opearator.,,,__SBP_C2K_ECC_NOT_TO_SEND_ESR_FOR_SPECIFIC_OPERATOR__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5683,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_C2K_ONLY_AREA_SEARCH_OPTIMIZATION,modem_sbp_config[56].SBP_C2K_ONLY_AREA_SEARCH_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureOptimize UE search performance in C2K only areabit 0:0:Apply MSPL search sequence in C2K only areabit 1:1:Optimize UE search performance in C2K only area",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5684,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_C2L_HIGHER_PRIORITY_PLMN_SEARCH,modem_sbp_config[75].SBP_C2L_HIGHER_PRIORITY_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP Featuretrigger higher priority plmn search when UE IRAT to LTE from C2Kbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5685,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_CALL_PREFER_ALWAYS_MONITOR_PCH_IN_PTM,modem_sbp_config[69].SBP_CALL_PREFER_ALWAYS_MONITOR_PCH_IN_PTM,OTA and OTA BY OP,no,no,no,yes,"As per 3GPP spec 23.060, if BSS Paging Co-ordinatation is supported and NMO is 2/3 then UE only needs to monitor PACCH during Packet Transfer mode.<BR>During FT, we have found that when UE is in Packet Transfer mode and NMO is 2/3 and BSS paging Co-ordinatation is supported by NW, still sometimes NW doesn't send paging request in PACCH. due to this MT call is missed as in this case, UE only monitoring PACCH. <BR>To overcome this case, we have provided this SBP so that UE can always monitor paging - PCH channel also in this case to enhance user call experience. <BR>Please note that this SBP is trade-off between CS MT Call performance and PS performance. e.g enabling this SBP will result in lower 2G throughput as UE also needs to monitor PCH.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Always Monitor PCH in Packet Transfer Mode, irrespective of BSS Paging Co-ordinatation in NMO 2/3<BR>0:Don't Monitor PCH in Packet Transfer Mode, if BSS Paging Co-ordinatation is supported in NMO 2/3",,,__CALL_PREFER_ALWAYS_MONITOR_PCH_IN_PTM__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5686,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_CA_HPUE,modem_sbp_config[86].SBP_CA_HPUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl if CA HPUE supportedbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5687,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_CB_CHANNEL_ONLY_STORED_IN_NVRAM,modem_sbp_config[30].SBP_CB_CHANNEL_ONLY_STORED_IN_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCB channels are stored only in NVRAMbit 0:0:Disabled. CB channels are not only stored in NVRAMbit 1:1:Enabled. CB channels are only stored in NVRAM",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5688,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_CB_CHANNEL_STORED_IN_SIM_FIRST,modem_sbp_config[26].SBP_CB_CHANNEL_STORED_IN_SIM_FIRST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure CB channels to be stored in SIM first instead of NVRAMbit 0:0:Disabled. CB channels not to be stored in SIM first instead of NVRAMbit 1:1:Enabled. CB channels to be stored in SIM first instead of NVRAM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5689,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_CB_DCS_ONLY_STORED_IN_NVRAM,modem_sbp_config[60].SBP_CB_DCS_ONLY_STORED_IN_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCB's DCS only stored in NVRAMbit 0:0:Disabled. CB DCS are not only stored in NVRAMbit 1:1:Enabled. CB DCS are only stored in NVRAM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5690,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_CC_SIM_ORIG_DIALLED_NUM,modem_sbp_config[25].SBP_CC_SIM_ORIG_DIALLED_NUM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen call control by sim is triggered and call number is modified, modem reports the original dialed numberbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5691,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_CC_SIM_SPECIFIC_ERROR_CAUSE,modem_sbp_config[25].SBP_CC_SIM_SPECIFIC_ERROR_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen call control by sim is triggered and call failed, modem report specific causebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5674,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_BG_SEARCH_4G5,modem_sbp_config[92].SBP_BG_SEARCH_4G5,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, When the Network does not broadcast NR neighbors info in LTE system information, <BR>UE will search for 5G network in the background",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5675,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_BLACK_CELL_LIST,modem_sbp_config[31].SBP_BLACK_CELL_LIST,OTA and OTA BY OP,no,no,no,yes,"This SBP item control the feature of black cell list enhancement. Turn on this SBP can let customer add/remove the black cell list information. Modem will avoid using these black cells to perform service.<BR>- When SBP is on, user can use inject message "black_cell" to edit black cell list.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:User can use edit black cell list by inject message<BR>0:User can not use edit black cell list by inject messagebit,,,This feature is default on with compile option __BLACK_CELL_LIST__.,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5676,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_BLIND_FR_2G_TDD,modem_sbp_config[65].SBP_BLIND_FR_2G_TDD,Not Support,no,no,no,yes,"This feature is to enhance LTE occupation rate in case 2G CS connection release including CSFB call, 2G call,LU,SMS and so on. When 2G CS connection release,fast return to LTE would be triggered.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5677,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_BOT_PRESENT_RAI_ABSENT,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_BOT_PRESENT_RAI_ABSENT,OTA and OTA BY OP,no,no,no,yes,"The SBP supports an implementation option as specified in TS 24.301 (clause 6.5.1.4.3) and TS 24.008 (clause 6.1.3.1.3.3). <BR>If the SBP is on, the UE behaves as follows: For the ESM/SM cause values #8, #27, #32, or #33, if the back-off timer is started or deactivated and the network does not include a Re-attempt indicator IE, the UE decides NOT to retry the procedure under blocking if it is registered to a new PLMN which is in the list of equivalent PLMNs. If the SBP is off, the UE decides to retry the procedure in EPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,LTE Protocol (R13 Baseline),4G,,,Legacy Feature,Pass,,,,
+5678,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_RAI_ABSENT,modem_sbp_config[38].SBP_BLOCK_EPLMN_RETRY_WHEN_RAI_ABSENT,OTA and OTA BY OP,no,no,no,yes,"The SBP supports an implementation option as specified in TS 24.301 (clause 6.5.1.4.3) and TS 24.008 (clause 6.1.3.1.3.3). <BR>If the SBP is on, the UE behaves as follows: For the ESM/SM cause values #50 and #51, the UE ignores the Back-off timer IE included by the network. Furthermore, if the network does not include a Re-attempt indicator IE the UE decides NOT to retry the procedure under blocking if it is registered to a new PLMN which is in the list of equivalent PLMNs. If the SBP is off, the UE decides to retry the procedure in EPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+5679,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_BLOCK_ILLEGAL_ME,modem_sbp_config[96].SBP_BLOCK_ILLEGAL_ME,OTA and OTA BY OP,no,no,no,yes,"This feature is to perform the operation of regulator-mandated (or voluntary) procedures to block the use of stolen devices on mobile networks. According to GSMA TS37_2.2_REQ_1, Blocking of all service access from one of the device IMEIs SHALL result in the entire device being blocked. Specifically, if a device receives reject #6 Illegal ME over one 3GPP connection, it SHALL block operation on all 3GPP/3GPP2 connections. Similarly, if a Lock until Power-Cycled Order is received over one 3GPP2 connection, the device SHALL block operation on all 3GPP/3GPP2 connections.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,The setting of this SBP could be set to "enable" by defining compile option __BLOCK_ILLEGAL_ME__ in the makefile,MD Config,Modem - Customer Requirement,,,"Test in machine (Y) <BR> Test Time (30) <BR> [Init] modify the UE's IMEI of SIM1 to a illegal value, keep SIM2 IMEI as valid value<BR> [Test Step] network regsitration of SIM1, get reject. check if SIM2 does not have service as well.<BR> [Expected Result] can not attach normal of both SIM cards",Pass,,,,
+5680,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_C2K_1X_FAST_TIMING_TRACKING_FEATURE,modem_sbp_config[94].SBP_C2K_1X_FAST_TIMING_TRACKING_FEATURE,OTA,no,no,no,yes,This SBP describes Whether 1xRtt supports fast timing tracking.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,1xRTT,3G,,,Test in machine (Y) <BR>Test Time (10 minutes) <BR>[Init] C2K mode<BR>[Test Step] 1. set 0 or 1<BR> 2. 1xRTT call setup<BR>[Expected Result] 1xRTT call not drop,Pass,,,,
+5681,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_C2K_COMBINED_LOCATION_INFO,modem_sbp_config[43].SBP_C2K_COMBINED_LOCATION_INFO,OTA and OTA BY OP,no,no,no,yes,"When PLMN search procedure is ongoing, UE will notify SIM about location change if UE find a cell in different location. However if UE is in boarder area and location changed frequently, SIM may recieve massive evend download command in short time and cause SIM error. This SBP can let UE combine all location information during PLMN search procedure and only update final one to SIM when attach successfully to reduce SIM access.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5682,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_C2K_ECC_NOT_TO_SEND_ESR_FOR_SPECIFIC_OPERATOR,modem_sbp_config[62].SBP_C2K_ECC_NOT_TO_SEND_ESR_FOR_SPECIFIC_OPERATOR,OTA and OTA BY OP,no,no,no,yes,"Some customer requires not to send EXTENDED SERVICE REQUEST for 1xCS fallback emergency call. However, in order to pass Verison test case, UE shall send EXTENDED SERVICE REQUEST for 1xCS fallback emergency call.<BR>When SBP_C2K_ECC_NOT_TO_SEND_ESR_FOR_SPECIFIC_OPERATOR is enabled and CDMA2000 attempts for emergency call, UE would not attempt to send EXTENDED SERVICE REQUEST for CDMA2000 emergency call in most projects, except for Verison. For normal CS fallback call from E-UTRAN to CDMA2000, UE attempts to send ESR in both Verison and non-Verison projects.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Send EXTENDED SERVICE REQUEST for C2K emergency call.<BR>0:Disable. Do not send EXTENDED SERVICE REQUEST for C2K emergency call for specfic opearator.,,,User could use compile option __SBP_C2K_ECC_NOT_TO_SEND_ESR_FOR_SPECIFIC_OPERATOR__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5683,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_C2K_ONLY_AREA_SEARCH_OPTIMIZATION,modem_sbp_config[56].SBP_C2K_ONLY_AREA_SEARCH_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"According to operator's MSPL design for MMSS search procedure, LTE will always has higher priority than CDMA. However, in such MSPL design, if UE is in CDMA only area, user may suffer no service until LTE full scan finish.<BR><BR>This feature can let UE skip LTE in initial MSPL search in certain condition to optimize search performance for CDMA service. LTE service has chance to recover by MPSR procedure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5684,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_C2L_HIGHER_PRIORITY_PLMN_SEARCH,modem_sbp_config[75].SBP_C2L_HIGHER_PRIORITY_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,no,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5685,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_CALL_PREFER_ALWAYS_MONITOR_PCH_IN_PTM,modem_sbp_config[69].SBP_CALL_PREFER_ALWAYS_MONITOR_PCH_IN_PTM,OTA and OTA BY OP,no,no,no,yes,"As per 3GPP spec 23.060, if BSS Paging Co-ordinatation is supported and NMO is 2/3 then UE only needs to monitor PACCH during Packet Transfer mode.<BR>During FT, we have found that when UE is in Packet Transfer mode and NMO is 2/3 and BSS paging Co-ordinatation is supported by NW, still sometimes NW doesn't send paging request in PACCH. due to this MT call is missed as in this case, UE only monitoring PACCH. <BR>To overcome this case, we have provided this SBP so that UE can always monitor paging - PCH channel also in this case to enhance user call experience. <BR>Please note that this SBP is trade-off between CS MT Call performance and PS performance. e.g enabling this SBP will result in lower 2G throughput as UE also needs to monitor PCH.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Always Monitor PCH in Packet Transfer Mode, irrespective of BSS Paging Co-ordinatation in NMO 2/3<BR>0:Don't Monitor PCH in Packet Transfer Mode, if BSS Paging Co-ordinatation is supported in NMO 2/3",,,"Default value depends on compilation flag, __CALL_PREFER_ALWAYS_MONITOR_PCH_IN_PTM__, if this flag is defined, then default value 1 otherwise 0",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5686,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_CA_HPUE,modem_sbp_config[86].SBP_CA_HPUE,OTA and OTA BY OP,no,no,no,yes,This SBP is used to decide whether HPUE for CA is enabled or not.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,This SBP feature will be used only if SBP_HPUE is enabled.,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5687,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_CB_CHANNEL_ONLY_STORED_IN_NVRAM,modem_sbp_config[30].SBP_CB_CHANNEL_ONLY_STORED_IN_NVRAM,OTA and OTA BY OP,no,no,no,yes,This feature allows the CB channels to be read and write to NVRAM only. CB channels from SIM will not be read and new channels will not be updated to SIM card.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,The setting of this SBP could be set to "enable" by defining compile option __CB_CHANNEL_ONLY_STORED_IN_NVRAM__ in the makefile,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5688,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_CB_CHANNEL_STORED_IN_SIM_FIRST,modem_sbp_config[26].SBP_CB_CHANNEL_STORED_IN_SIM_FIRST,OTA and OTA BY OP,no,no,no,yes,This feature can configure that CB(Cell Broadcast) channels to be stored in SIM first instead of NVRAM.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,The setting of this SBP could be set to "enable" by defining compile option __CB_CHANNEL_STORED_IN_SIM_FIRST__ in the makefile,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5689,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_CB_DCS_ONLY_STORED_IN_NVRAM,modem_sbp_config[60].SBP_CB_DCS_ONLY_STORED_IN_NVRAM,OTA and OTA BY OP,no,no,no,yes,This feature allows the CB DCS(languages) to be read and write to NVRAM only. CB DCS from SIM will not be read and new channels will not be updated to SIM card.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5690,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_CC_SIM_ORIG_DIALLED_NUM,modem_sbp_config[25].SBP_CC_SIM_ORIG_DIALLED_NUM,OTA and OTA BY OP,no,no,no,yes,"When call number is modified by 'call control by SIM', report the original dial number to AP.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,The setting of this SBP could be set to "enable" by defining compile option __CC_SIM_ORIG_DIALLED_NUM__ in the makefile,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5691,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_CC_SIM_SPECIFIC_ERROR_CAUSE,modem_sbp_config[25].SBP_CC_SIM_SPECIFIC_ERROR_CAUSE,OTA and OTA BY OP,no,no,no,yes,"When "call control by SIM" fail without any cause from network nor normal call clearing//reject procedure, modem will report a specific cause required by customer.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,The setting of this SBP could be set to "enable" by defining compile option __CC_SIM_SPECIFIC_ERROR_CAUSE__ in the makefile,MD Config,Modem - Customer Requirement,,,,Pass,,,,
5692,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_CDG143_MAPE_SYS_AVOID_FEATURE,modem_sbp_config[51].SBP_CDG143_MAPE_SYS_AVOID_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureavoid a MAPE happened systembit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5693,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_CELL_BARRING_WHEN_NO_RRC_CONN_SETUP,modem_sbp_config[74].SBP_CELL_BARRING_WHEN_NO_RRC_CONN_SETUP,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP Feature, During MO/MT/CSFB call if connection establishment got fail then bar the cell.<BR>bit 0: 0:Not Supported bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Supported<BR>0:Not supported,,,__CELL_BARRING_WHEN_NO_RRC_CONN_SETUP__,MD Config,Modem - Customer Requirement,,,Test in machine: N Test Time (minutes): 10 Init: follow MCF RD IT initial steps Test Step: follow MCF RDIT SOP change value from 0 to 1 change value from 1 to 0 Expected Result: Value changes in MCF dump,Untested,,,,
-5694,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_CELL_FACH_LTE_APBCR,modem_sbp_config[72].SBP_CELL_FACH_LTE_APBCR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to configure LTE APBCR in Cell FACH",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5695,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_CHANGE_CATEGORY_WHEN_NO_CA_SUPPORTED,modem_sbp_config[76].SBP_CHANGE_CATEGORY_WHEN_NO_CA_SUPPORTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDetermine UE category when no CA RF supportedbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__SBP_CHANGE_CATEGORY_WHEN_NO_CA_SUPPORTED__,LTE Protocol (R11 Baseline),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5696,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_CHANGE_CELL_TYPE_SUITABLE_TO_ACCEPTABLE_IF_ECC_CALL_PENDING,modem_sbp_config[75].SBP_CHANGE_CELL_TYPE_SUITABLE_TO_ACCEPTABLE_IF_ECC_CALL_PENDING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChange cell_type to acceptable from suitable if ecc call is pendingbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If this SBP is disabled, CS activity can perform during emergency call<BR>0x1:If this SBP is enabled & NWSEL send EMERGENCY call status indication to MM before PLMN_SEARCH. MM will consider the current cell as ACCEPTABLE CELL which avoid CS activity before ECC call.",,,__SBP_CHANGE_CELL_TYPE_SUITABLE_TO_ACCEPTABLE_IF_ECC_CALL_PENDING__,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+5693,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_CELL_BARRING_WHEN_NO_RRC_CONN_SETUP,modem_sbp_config[74].SBP_CELL_BARRING_WHEN_NO_RRC_CONN_SETUP,OTA and OTA BY OP,no,no,no,no,Optimization is to bar the cell if RRC Connection establishment failed in good radio conditions during CSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Supported<BR>0:Not supported,,,"To enable this feature, compile option __CELL_BARRING_WHEN_NO_RRC_CONN_SETUP__ must be defined",MD Config,Modem - Customer Requirement,,,Test in machine: N Test Time (minutes): 10 Init: follow MCF RD IT initial steps Test Step: follow MCF RDIT SOP change value from 0 to 1 change value from 1 to 0 Expected Result: Value changes in MCF dump,Untested,,,,
+5694,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_CELL_FACH_LTE_APBCR,modem_sbp_config[72].SBP_CELL_FACH_LTE_APBCR,OTA and OTA BY OP,no,no,no,yes,"If enabled, UE will perform ABSOLUTE PRIORITY BASED measurements and reselection in CELL_FACH state if configured by the Network",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5695,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_CHANGE_CATEGORY_WHEN_NO_CA_SUPPORTED,modem_sbp_config[76].SBP_CHANGE_CATEGORY_WHEN_NO_CA_SUPPORTED,OTA and OTA BY OP,no,no,no,yes,"UE can disable CA capability by AT command or RF configuration. If there is no CA capability, UE will change category to category 4 or category DL4UL5.<BR>If this SBP is enabled, the reported category will be category 6 or DL6UL5 instead of category 4 or category DL4UL5.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"If __SBP_CHANGE_CATEGORY_WHEN_NO_CA_SUPPORTED__ is defined, the SBP will be enabled.",LTE Protocol (R11 Baseline),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5696,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_CHANGE_CELL_TYPE_SUITABLE_TO_ACCEPTABLE_IF_ECC_CALL_PENDING,modem_sbp_config[75].SBP_CHANGE_CELL_TYPE_SUITABLE_TO_ACCEPTABLE_IF_ECC_CALL_PENDING,OTA and OTA BY OP,no,no,no,yes,"This SBP is set ON for ATT LTE-BTR-1-8900.<BR>When this SBP is ON ,when MM is in MM_NULL state ,if NWSEL send EMERGENCY call status indication to MM before PLMN_SEARCH. MM will consider the current cell as ACCEPTABLE CELL even the NWSEL and/or lower layer could find the SUITABLE cell. This will avoid any CS activity(LAU) before ECC call. The scenario occurs when ECC call attempted while Airplane mode ON, IMS call fails and ECC call retried over CS.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If this SBP is disabled, CS activity can perform during emergency call<BR>0x1:If this SBP is enabled & NWSEL send EMERGENCY call status indication to MM before PLMN_SEARCH. MM will consider the current cell as ACCEPTABLE CELL which avoid CS activity before ECC call.",,,This SBP can be controlled by compile option __SBP_CHANGE_CELL_TYPE_SUITABLE_TO_ACCEPTABLE_IF_ECC_CALL_PENDING__,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
5697,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_CHANGE_NON_CA_ORDER_WHEN_HAVE_REQ_FREQ_BAND,modem_sbp_config[91].SBP_CHANGE_NON_CA_ORDER_WHEN_HAVE_REQ_FREQ_BAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureif NW config requestFrequencyband, change non CA orderbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable => don't change non-CA order,,,__NOT_CHANGE_NON_CA_ORDER_WHEN_HAVE_REQ_FREQ_BAND__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5698,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_CHECK_DL256QAM_PLMN_TABLE,modem_sbp_config[84].SBP_CHECK_DL256QAM_PLMN_TABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl if PLMN table is checked to enable DL 256QAMbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> PLMN table shall be checked before UE does the DL 256QAM enabling judgment.<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5699,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_CHECK_MODEM_IVSR_TRIGGERED_WHEN_LU_ACCEPT,modem_sbp_config[60].SBP_CHECK_MODEM_IVSR_TRIGGERED_WHEN_LU_ACCEPT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMay trigger IVSR when LU accept, PS SIM invalid, and PS registered ever on RPLMN.bit 0:0:Do not check if to trigger IVSR whenever LU acceptbit 1:1:Check if to trigger IVSR whenever LU accpet",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5700,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_CLEAR_CODE_27,modem_sbp_config[66].SBP_CLEAR_CODE_27,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustomized maximum attach retry times if received ESM cause #27bit 0:0:Disable. The UE will have 5 times of chances to request attach on LTE RAT if it receives attach reject with ESM cause #27bit 1:1:Enabled. The UE will only have 3 times of chances to request attach on LTE RAT if it receives attach reject with ESM cause #27",BIT,1,,1,__CLEAR_CODE_27__ : 1<BR>DEFAULT_VALUE : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,This feature is controlled by __CLEAR_CODE_27__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE tries to attach to LTE.<BR>[Test Step] <BR>UE got attach reject with ESM reject cause#27<BR>ESM receives 3 times ESM rejection with cause #27(Missing or unknown APN)<BR>[Expected Result]<BR> the UE should disable its EUTRAN capability and search other RAT until 2-hour timer is expired.,Pass,,,,
-5701,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_CLEAR_CODE_33,modem_sbp_config[8].SBP_CLEAR_CODE_33,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureClear Code 33 featurebit 0:0:Disabled. Turn-off clear code 33 featurebit 1:1:Enabled. Turn-on clear code 33 feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,(TELCEL_CLARO) CC33_29,OP Requirement,,,Please follow Telcel CC33/29 requirement.,Untested,,,,
-5702,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_CLEAR_CODE_33_29_NO_RETRY,modem_sbp_config[75].SBP_CLEAR_CODE_33_29_NO_RETRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable the No Retry Version of Telcel CC33bit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,(TELCEL_CLARO) CC33_29,OP Requirement,,,Please follow Telcel requirement,Pass,,,,
-5703,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_CLEAR_CODE_33_T3402,modem_sbp_config[97].SBP_CLEAR_CODE_33_T3402,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustomized maximum attach retry times if received ESM cause 33bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,This feature is controlled by __CLEAR_CODE_33__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE tries to attach to LTE.<BR>[Test Step] <BR>UE got attach reject with ESM reject cause.<BR>ESM receives 3 times ESM rejection with cause #29(User authentication failed) or #33(Requested service option not subscribed). <BR>[Expected Result]<BR> the UE should disable its EUTRAN capability and search other RAT until 2-hour timer is expired.,Pass,,,,
-5704,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_CLEAR_LOCI_WHEN_REFRESH_INIT_FCN,modem_sbp_config[22].SBP_CLEAR_LOCI_WHEN_REFRESH_INIT_FCN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureClear LOCI files in SIM card when performing REFRESH with IMSI in File Change Listbit 0:0:Disable. Not clear LOCI files for REFRESH with IMSI in File Change List.bit 1:1:Enable. Clear LOCI files for REFRESH with IMSI in File Change List.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5705,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_CLEAR_LOCI_WHEN_UICC_RESET,modem_sbp_config[13].SBP_CLEAR_LOCI_WHEN_UICC_RESET,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureClear LOCI files in SIM card when performing REFRESH(UICC RESET)bit 0:0:Disable. Not clear LOCI files for UICC RESET type of REFRESH.bit 1:1:Enable. Clear LOCI files for UICC RESET type of REFRESH.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5706,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_CMCC_SRVCC_CDRX_EHEN,modem_sbp_config[31].SBP_CMCC_SRVCC_CDRX_EHEN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMeasure 2G ARFCN using LTE connected DRX periodbit 0:0:UE can not measure 2G ARFCN using LTE connected DRX periodbit 1:1:UE can measure 2G ARFCN using LTE connected DRX period",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE can measure 2G ARFCN using LTE connected DRX period<BR>0:UE can not measure 2G ARFCN using LTE connected DRX periodbit,,,"SBP_SRVCC_STOP_UAS_MEAS,SBP_SRVCC_DRX_INC_GAP,SBP_SRVCC_STOP_EAS_MEAS",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5707,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_CMCC_VOLTE_FT,modem_sbp_config[17].SBP_CMCC_VOLTE_FT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCMCC VoLTE enhancementbit 0:0:It may suffer handover success rate too low during VoLTE call on CMCC networkbit 1:1:It can increase handover success rate during VoLTE call on CMCC network",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:It can increase handover success rate during VoLTE call on CMCC network<BR>0:It may suffer handover success rate too low during VoLTE call on CMCC networkbit,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5698,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_CHECK_DL256QAM_PLMN_TABLE,modem_sbp_config[84].SBP_CHECK_DL256QAM_PLMN_TABLE,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE checks the PLMN table first to see if DL 256QAM can be enabled for current serving PLMN.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> PLMN table shall be checked before UE does the DL 256QAM enabling judgment.<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5699,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_CHECK_MODEM_IVSR_TRIGGERED_WHEN_LU_ACCEPT,modem_sbp_config[60].SBP_CHECK_MODEM_IVSR_TRIGGERED_WHEN_LU_ACCEPT,OTA and OTA BY OP,no,no,no,yes,"UE may trigger IVSR if PS SIM is invalid and UE had registered on the PS domain of registered PLMN when LU accept.<BR>Scenario: UE may receive RAU reject cause #7 GPRS_SERVICES_NOT_ALLOWED and enters "Invalid SIM" state for PS domain when user manually select a PLMN. When the user selects automatic selection mode and successfully register on a PLMN, we will check if IVSR needs to be triggered. <BR>Please refer to SBP_ENABLE_MODEM_IVSR for details of IVSR feature.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5700,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_CLEAR_CODE_27,modem_sbp_config[66].SBP_CLEAR_CODE_27,OTA and OTA BY OP,no,no,no,yes,"It defines that when ESM receives 3 times ESM rejection with cause #27(Missing or unknown APN), the UE should stop trying to do attach for PS domain until a 2-hour timer is expired. If the rejection happens on LTE RAT, the UE should disable its EUTRAN capability and search 2G or 3G also until 2-hour timer is expired.",BIT,1,,1,__CLEAR_CODE_27__ : 1<BR>DEFAULT_VALUE : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,This feature is controlled by __CLEAR_CODE_27__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE tries to attach to LTE.<BR>[Test Step] <BR>UE got attach reject with ESM reject cause#27<BR>ESM receives 3 times ESM rejection with cause #27(Missing or unknown APN)<BR>[Expected Result]<BR> the UE should disable its EUTRAN capability and search other RAT until 2-hour timer is expired.,Pass,,,,
+5701,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_CLEAR_CODE_33,modem_sbp_config[8].SBP_CLEAR_CODE_33,OTA and OTA BY OP,no,no,no,yes,"It defines that when SM or ESM receives 3 times SM/ESM rejection with cause #29(User authentication failed) or #33(Requested service option not subscribed). The UE should stop trying to do attach for PS domain until a 2-hour timer is expired. If the rejection happens on LTE RAT, the UE should disable its EUTRAN capability and search 2G or 3G also until 2-hour timer is expired.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __CLEAR_CODE_33__.,(TELCEL_CLARO) CC33_29,OP Requirement,,,Please follow Telcel CC33/29 requirement.,Untested,,,,
+5702,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_CLEAR_CODE_33_29_NO_RETRY,modem_sbp_config[75].SBP_CLEAR_CODE_33_29_NO_RETRY,OTA and OTA BY OP,no,no,no,yes,"3GPP does not specify that the UE should switch to 3G when receiving ESM cause #33/#29. In other words, the UE may stay in 4G and retry to attach the network. In the no retry version of Telcel CC33, once receiving the reject with ESM cause #33/#29, DUT shall switch to 3G (without any retry).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __SBP_CLEAR_CODE_33_29_NO_RETRY__.,(TELCEL_CLARO) CC33_29,OP Requirement,,,Please follow Telcel requirement,Pass,,,,
+5703,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_CLEAR_CODE_33_T3402,modem_sbp_config[97].SBP_CLEAR_CODE_33_T3402,OTA and OTA BY OP,no,no,no,yes,"[3GPP spec. 24.301 - 5.5.1.2.6]<BR>d) ATTACH REJECT, ... Upon reception of the EMM cause #19 "ESM failure", if the UE is not configured for NAS signalling low priority and the ESM cause value received in the PDN CONNECTIVITY REJECT message is not #54 "PDN connection does not exist", the UE may set the attach attempt counter to 5. Subsequently, if the UE needs to retransmit the ATTACH REQUEST message to request PDN connectivity towards a different APN, the UE may stop T3411 or T3402, if running, and send the ATTACH REQUEST message.<BR>NOTE 3: When receiving EMM cause #19 "ESM failure", coordination is required between the EMM and ESM sublayers in the UE to determine whether to set the attach attempt counter to 5. <BR><BR>[MTK default design]<BR>MTK device will disable LTE and start T3402 upon receiving ESM #33 during Attach procedure at the first attempt.<BR><BR>[SBP description]<BR>This SBP defines that when ESM receives 3 times Attach reject with ESM cause in case of #33(Requested service option not subscribed). The UE should stop trying to do attach for PS domain until T3402 expired. If the rejection happens on LTE RAT, the UE should disable its EUTRAN capability and search 2G or 3G also until T3402 expired.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,This feature is controlled by __CLEAR_CODE_33_T3402__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>UE tries to attach to LTE.<BR>[Test Step] <BR>UE got attach reject with ESM reject cause.<BR>ESM receives 3 times ESM rejection with cause #29(User authentication failed) or #33(Requested service option not subscribed). <BR>[Expected Result]<BR> the UE should disable its EUTRAN capability and search other RAT until 2-hour timer is expired.,Pass,,,,
+5704,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_CLEAR_LOCI_WHEN_REFRESH_INIT_FCN,modem_sbp_config[22].SBP_CLEAR_LOCI_WHEN_REFRESH_INIT_FCN,Not Support,no,no,no,yes,"With the feature enabled, the device will clear the data in EF_LOCI, EF_PSLOCI and EF_EPSLOCI when performing REFRESH command with IMSI in File Change List.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,The setting of this SBP could be set to "enable" by defining compile option __CLEAR_LOCI_WHEN_REFRESH_FCN__ in the makefile,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5705,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_CLEAR_LOCI_WHEN_UICC_RESET,modem_sbp_config[13].SBP_CLEAR_LOCI_WHEN_UICC_RESET,Not Support,no,no,no,yes,"With the feature enabled, the device will clear the data in EF_LOCI, EF_PSLOCI and EF_EPSLOCI when performing UICC RESET type of REFRESH command.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,The setting of this SBP could be set to "enable" by defininig __CLEAR_LOCI_WHEN_UICC_RESET__ in the makefile.,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5706,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_CMCC_SRVCC_CDRX_EHEN,modem_sbp_config[31].SBP_CMCC_SRVCC_CDRX_EHEN,OTA and OTA BY OP,no,no,no,yes,"This SBP controls one of the SRVCC enhancement on CMCC:<BR>- As SBP enable,measure 2G ARFCN using LTE connected DRX period.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE can measure 2G ARFCN using LTE connected DRX period<BR>0:UE can not measure 2G ARFCN using LTE connected DRX periodbit,,,"SBP_CMCC_SRVCC_CDRX_EHEN, SBP_SRVCC_STOP_UAS_MEAS, SBP_SRVCC_DRX_INC_GAP, and SBP_SRVCC_STOP_EAS_MEAS should be enabled at the same time.",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5707,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_CMCC_VOLTE_FT,modem_sbp_config[17].SBP_CMCC_VOLTE_FT,OTA and OTA BY OP,no,no,no,yes,"When this SBP item turns on, it can improve handover success rate during VoLTE call on CMCC.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:It can increase handover success rate during VoLTE call on CMCC network<BR>0:It may suffer handover success rate too low during VoLTE call on CMCC networkbit,,,N/A,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
5708,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_CMHK_CUSTOMIZE_EPLMN,modem_sbp_config[15].SBP_CMHK_CUSTOMIZE_EPLMN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAdd CMHK network as equivalaent PLMNbit 0:0:Turn-off. Not add CMHK network as EPLMNbit 1:1:Turn-on. Add CMHK network as EPLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5709,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_CONSERVATIVE_IPV4V6_FALLBACK_STRATEGY,modem_sbp_config[10].SBP_CONSERVATIVE_IPV4V6_FALLBACK_STRATEGY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether UE will strictly follow spec to try fallback or not when recevied various of ESM/SM causebit 0:0:Off:Not just follow the specbit 1:1:On:Strictly follow the spec",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,N/A,Untested,,,,
-5710,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_CONSIDER_DUPLEX_MODE_FOR_FULLBAND_SEARCH_ORDER,modem_sbp_config[68].SBP_CONSIDER_DUPLEX_MODE_FOR_FULLBAND_SEARCH_ORDER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConsider current duplex mode for fullband rat search orderbit 0:0:Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-5711,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14,modem_sbp_config[36].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConvert Attach Reject cause 7 to 14bit 0:0:Do not Convert attach reject cause #7bit 1:1:Convert attach reject cause from 7 to 14 in VPLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE shall convert Attach Reject cause #7 to cause #14 when camped on VPLMN<BR>0:UE shall not convert Attach reject with cause #7 to #14 on VPLMN,,,__DISABLE_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init] Put valid SIM in DUT <BR> [Test Step] Register UE in HPLMN, <BR> Camp UE in VPLMN & trigger Attach request .<BR> NW send Attach reject with cause #7<BR> [Expected Result]<BR> DUT SIM is valid for PS services",Pass,,,,
-5712,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14_IN_MANUAL_VPLMN,modem_sbp_config[97].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14_IN_MANUAL_VPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConvert reject cause #7 to #14 on manual VPLMNbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:If this SBP is disabled then during Manual PLMN Search on VPLMN and if UE gets reject cause 7 (GPRS services not allowed )UE will behave as reject cause 7<BR>0x1:If this SBP is enabled then during Manual PLMN Search on VPLMN and If UE gets reject cause 7 (GPRS services not allowed) that will be converted to reject cause 14 (GPRS services not allowed in this PLMN ),,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : N<BR> Test Time (minutes) 10 mins<BR> [Init] NA<BR> [Test Step]<BR> 1. Bootup the device.<BR> 2. Camp UE in VPLMN & UE perform GMM Attach request. <BR> 3. Network send Attach reject with cause #7 (GPRS service not allowed).<BR> [Expected Result]<BR> UE need to register to network after manual PLMN Selection on VPLMN.,Untested,,,,
-5713,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_CONVERT_REJ_CAUSE7_TO_14_ON_HPLMN_FOR_AKASIM,modem_sbp_config[95].SBP_CONVERT_REJ_CAUSE7_TO_14_ON_HPLMN_FOR_AKASIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConvert GMM reject cause from #7 to #14 for HPLMN for AKA stack bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:MM converts GMM reject cause #7(GPRS_NOT_ALLOWED) to cause#14 (GPRS_NOT_ALLOWED_IN_PLMN) for HPLMN if current stack is AKA<BR>0:UE will behave as GMM reject cause #7 which is as per 3GPP,,,,VSIM 3.0,SIM,,,Test in machine (Y/N) N <BR> Test Time (minutes)<BR> 10 mins <BR> [Init] <BR> NA<BR> [Test Step] <BR> - AKA SIM in HPLMN<BR> - Network send Attach/RAU reject with caus#7 <BR> <BR> [Expected Result]<BR> -SIM remains valid for PS services,Pass,,,,
-5714,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_CPHS_CFU_OVER_EFCFIS,modem_sbp_config[21].SBP_CPHS_CFU_OVER_EFCFIS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCPHS CFU file has higher priority than EF_CFISbit 0:0:Nobit 1:1:Yes",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-5715,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_CR_R10_NO_EPSB_LOCAL_DETACH,modem_sbp_config[21].SBP_CR_R10_NO_EPSB_LOCAL_DETACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureR10 inter system change to LTE without pdpbit 0:0:Disable. R9 behavior proceed TAU if IRAT to LTE without PDPbit 1:1:Enabled. R10 behavior local detach and re-attach if IRAT to LTE without PDP",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. R10 behavior local detach and re-attach if IRAT to LTE without PDP.<BR>0:Disable. R9 behavior proceed TAU if IRAT to LTE without PDP.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5716,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_CSFB_CALL_RETRY_ON_CMSERVICE_LU_REJECT_WITH_CAUSE15,modem_sbp_config[85].SBP_CSFB_CALL_RETRY_ON_CMSERVICE_LU_REJECT_WITH_CAUSE15,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCSFB call retry on CM service LU reject cause#15bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Device attempt CS call on diffrent LAI where Network send CM service reject or LAU reject with cause#15<BR>0:Device attempt CS call on same LAI where Network send CM service reject or LAU reject with cause#15,,,__SBP_CSFB_CALL_RETRY_ON_CMSERVICE_LU_REJECT_WITH_CAUSE15__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR>Test Time (minutes) : 10 mins <BR>[Init]<BR>DUT register in 4G<BR>[Test Step]<BR>1. make MO CSFB call.<BR>2. Make sure device move to registered LAI oin 2/3G.<BR>3. Reject the CM Service / LU(with FOR) with cause#15.<BR>4. There should be other LAI present in the 2/3G.<BR>[Expected Result]<BR>Reattempt the CSFB voice call after CM Service rejected or LU(with FOR) rejected with Cause#15.<BR>[More],Pass,,,,
-5717,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_CSFB_DUPLEX_CHG_FOR_LG_MODE,modem_sbp_config[55].SBP_CSFB_DUPLEX_CHG_FOR_LG_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This SBP is for LG_WG feature, and LG_WG feature does not use after UMOLYAbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable this SBP,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5718,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_CSFB_GSM_PREFER,modem_sbp_config[34].SBP_CSFB_GSM_PREFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePrefer GSM when CSFBbit 0:0:Search UMTS first when CSFBbit 1:1:Search GSM first when CSFB",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Search GSM first when CSFB<BR>0:Search UMTS first when CSFB,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5719,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_CSFB_REDIRECT_TO_GSM_WITHOUT_REDI_INFO,modem_sbp_config[102].SBP_CSFB_REDIRECT_TO_GSM_WITHOUT_REDI_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurewhen NW doesn't config redirection list, doesn't do 4G2 redirectionbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,enable the SBP & config SIB7 for the UE and do CSFB without Redirection info,Untested,,,,
-5720,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_CSFB_REJECT,modem_sbp_config[10].SBP_CSFB_REJECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]This feature enables UE to configure CSFB reject.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5721,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_CSG_RESTORE_DUPLICATED_SELECTION_MODE_WHEN_SWITCH_ON,modem_sbp_config[16].SBP_CSG_RESTORE_DUPLICATED_SELECTION_MODE_WHEN_SWITCH_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen switch on, restore CSG duplicated selection mode.bit 0:0:Turn-off. Not restore CSG duplicated selection modebit 1:1:Turn-on. Restore CSG duplicated selection mode",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5722,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_CS_AUTHENTICATION_REJECT_PS_UNAFFECTED,modem_sbp_config[24].SBP_CS_AUTHENTICATION_REJECT_PS_UNAFFECTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCS authentication is rejected but PS unaffectedbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.This means that PS domain will not be affected by CS domain authentication reject<BR>0:Disabled. This means that PS domain will be affected by CS domain authentication reject,,,__CS_AUTHENTICATION_REJECT_PS_UNAFFECTED__,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init]<BR>Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated<BR>[Test Step] <BR>Perform registration on 2G <BR>[Expected Result] <BR>After CS reject. UE able to register in PS domain",Pass,,,,
-5723,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_CS_CALL_PROTECTION_FROM_PS_PAGING,modem_sbp_config[41].SBP_CS_CALL_PROTECTION_FROM_PS_PAGING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo enable CS Call protection during PS Pagingbit 0:0:Not enabled :Not to Ignore Packet paging during ongoing CS Callbit 1:1:Enabled :Ignore Packet paging during ongoing CS call",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:MS will not ignore packed paging during ongoing CS call<BR>1:This SKT Korea Requirement is to ignore packet paging during ongoing Circuit switched call,,,__MM_CS_CALL_PROTECTION_FROM_PS_PAGING,MD Config,Modem - Customer Requirement,,,na,Pass,,,,
-5724,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_CS_CALL_RETRY_MAX_TIMER,modem_sbp_config[76].SBP_CS_CALL_RETRY_MAX_TIMER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature__CS_CALL_RETRY_MAX_TIMER__bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,30,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5725,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_CT_RPLMN_ROAMING_SEARCH,modem_sbp_config[77].SBP_CT_RPLMN_ROAMING_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply RPLMN search for CT roaming scenariobit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,DEFAULT_VALUE : 0<BR>__SBP_CT_RPLMN_ROAMING_SEARCH__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,"if __SBP_CT_RPLMN_ROAMING_SEARCH__ is defined, it will be 1",MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-5726,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_CUSTOMIZED_IDLE_STRING_AS_CALL,modem_sbp_config[5].SBP_CUSTOMIZED_IDLE_STRING_AS_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIdle string is intended to be treated as CC operationbit 0:0:Idle string is intended to be treated as USSD operationbit 1:1:Idle string is intended to be treated as CC operation",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5727,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_CUSTOM_BAR_LTE_RESEL_FAIL_CELL,modem_sbp_config[102].SBP_CUSTOM_BAR_LTE_RESEL_FAIL_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustom bar LTE cell when resel S-criteria failbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the custom bar LTE cell when reselection S-criteria fail<BR>0:Disable the custom bar LTE cell when reselection S-criteria fail,,,__CUSTOM_BAR_LTE_RESEL_FAIL_CELL__,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+5709,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_CONSERVATIVE_IPV4V6_FALLBACK_STRATEGY,modem_sbp_config[10].SBP_CONSERVATIVE_IPV4V6_FALLBACK_STRATEGY,OTA and OTA BY OP,no,no,no,yes,"According to spec TS24.301 and TS 24.008,if UE set pdp type to "IPv4v6", and been allocated single address<BR>with ESM/SM cause #52 "single address bearers only allowed", UE should try another pdp type "IPv4 or IPv6" to<BR>get another address.if the SBP is on,UE will strictly follow the spec, else UE will also try another pdp type<BR>if received other causes or if UE don't get any address and will try single pdp type(ipv4 or ipv6)<BR>to get address from NW",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,The setting of this SBP could be controlled by__CONSERVATIVE_IPV4V6_FALLBACK_STRATEGY__,MD Config,Modem - Customer Requirement,,,N/A,Pass,,,,
+5710,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_CONSIDER_DUPLEX_MODE_FOR_FULLBAND_SEARCH_ORDER,modem_sbp_config[68].SBP_CONSIDER_DUPLEX_MODE_FOR_FULLBAND_SEARCH_ORDER,Not Support,no,no,no,yes,"If the SBP is off, UE will use the default RAT order.<BR>If the SBP is on, UE will set UMTS to the last one when CMCC SIM in WCDMA mode or non-CMCC SIM in TDS-CDMA mode since the duplex mode will not find Home PLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,"if compile option __CONSIDER_DUPLEX_MODE_FOR_FULLBAND_SEARCH_ORDER__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+5711,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14,modem_sbp_config[36].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14,OTA and OTA BY OP,no,no,no,yes,"On VPLMN, When GMM(GPRS Mobility Management) layer receive GMM ATTACH REJECT with cause#7(GPRS servics not allowed). This feature shall be used to convert the Attach Reject cause#7 to cause #14(GPRS servics not allowed in this PLMN).",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE shall convert Attach Reject cause #7 to cause #14 when camped on VPLMN<BR>0:UE shall not convert Attach reject with cause #7 to #14 on VPLMN,,,"To disable this feature, compile option __DISABLE_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14__ must be defined.",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init] Put valid SIM in DUT <BR> [Test Step] Register UE in HPLMN, <BR> Camp UE in VPLMN & trigger Attach request .<BR> NW send Attach reject with cause #7<BR> [Expected Result]<BR> DUT SIM is valid for PS services",Pass,,,,
+5712,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14_IN_MANUAL_VPLMN,modem_sbp_config[97].SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14_IN_MANUAL_VPLMN,OTA and OTA BY OP,no,no,no,yes,If this SBP is enabled then During manual search on VPLMN and If UE gets reject cause <BR>7(GPRS services not allowed) that will be converted to reject cause 14(GPRS services not allowed in this PLMN).,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:If this SBP is disabled then during Manual PLMN Search on VPLMN and if UE gets reject cause 7 (GPRS services not allowed )UE will behave as reject cause 7<BR>0x1:If this SBP is enabled then during Manual PLMN Search on VPLMN and If UE gets reject cause 7 (GPRS services not allowed) that will be converted to reject cause 14 (GPRS services not allowed in this PLMN ),,,This SBP can be controlled by compile option __SBP_CONVERT_ATTACH_REJECT_FROM_CAUSE_7_TO_14_IN_MANUAL_VPLMN__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : N<BR> Test Time (minutes) 10 mins<BR> [Init] NA<BR> [Test Step]<BR> 1. Bootup the device.<BR> 2. Camp UE in VPLMN & UE perform GMM Attach request. <BR> 3. Network send Attach reject with cause #7 (GPRS service not allowed).<BR> [Expected Result]<BR> UE need to register to network after manual PLMN Selection on VPLMN.,Pass,,,,
+5713,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_CONVERT_REJ_CAUSE7_TO_14_ON_HPLMN_FOR_AKASIM,modem_sbp_config[95].SBP_CONVERT_REJ_CAUSE7_TO_14_ON_HPLMN_FOR_AKASIM,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled will convert the GMM Reject cause from #7(GPRS_NOT_ALLOWED) to cause #14(GPRS_NOT_ALLOWED_IN_PLMN) for HPLMN if current stack is AKA,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:MM converts GMM reject cause #7(GPRS_NOT_ALLOWED) to cause#14 (GPRS_NOT_ALLOWED_IN_PLMN) for HPLMN if current stack is AKA<BR>0:UE will behave as GMM reject cause #7 which is as per 3GPP,,,This feature is controlled by __SBP_CONVERT_REJ_CAUSE7_TO_14_ON_HPLMN_FOR_AKASIM__ flag,VSIM 3.0,SIM,,,Test in machine (Y/N) N <BR> Test Time (minutes)<BR> 10 mins <BR> [Init] <BR> NA<BR> [Test Step] <BR> - AKA SIM in HPLMN<BR> - Network send Attach/RAU reject with caus#7 <BR> <BR> [Expected Result]<BR> -SIM remains valid for PS services,Pass,,,,
+5714,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_CPHS_CFU_OVER_EFCFIS,modem_sbp_config[21].SBP_CPHS_CFU_OVER_EFCFIS,OTA and OTA BY OP,no,no,no,yes,"There are 2 SIM files related to CFU icon: EF_CFIS(6FCB) and EF_CFF_CPHS(6F13) where EF_CFIS has higher priority in default when the values are inconsistent between two files. This SBP feature is used to reverse the priority of these 2 files, i.e.: make priority of EF_CFF_CPHS higher than EF_CFIS.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,,,,,,Pass,,,,
+5715,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_CR_R10_NO_EPSB_LOCAL_DETACH,modem_sbp_config[21].SBP_CR_R10_NO_EPSB_LOCAL_DETACH,OTA and OTA BY OP,no,no,no,yes,"3GPP R10 new behavior(CR0969 C1-110718). If this SBP is enabled, UE will local detach first and re-attach immediately if IRAT from 23G to LTE without any PDP context. Otherwise, UE will follow R9 behavior to proceed TAU if IRAT from 23G to LTE without any PDP context. Below are the spec description.<BR><BR>- TS 24.301 5.1.4<BR>At intersystem change from A/Gb or Iu mode to S1 mode when no PDP context is active, the UE shall move to state EMM-DEREGISTERED and state GMM-DEREGISTERED and then initiate an attach procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. R10 behavior local detach and re-attach if IRAT to LTE without PDP.<BR>0:Disable. R9 behavior proceed TAU if IRAT to LTE without PDP.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5716,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_CSFB_CALL_RETRY_ON_CMSERVICE_LU_REJECT_WITH_CAUSE15,modem_sbp_config[85].SBP_CSFB_CALL_RETRY_ON_CMSERVICE_LU_REJECT_WITH_CAUSE15,OTA,no,no,no,yes,"When device moves to registered LAI during CSFB call and CM service request or LAU request(with FOR) is rejected by network with cause #15 CSFB call will never be successful as the steps will be repeated. When SBP is enabled, call is attempted in other LAI in 2/3G.",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Device attempt CS call on diffrent LAI where Network send CM service reject or LAU reject with cause#15<BR>0:Device attempt CS call on same LAI where Network send CM service reject or LAU reject with cause#15,,,This feature is controlled by __SBP_CSFB_CALL_RETRY_ON_CMSERVICE_LU_REJECT_WITH_CAUSE15__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR>Test Time (minutes) : 10 mins <BR>[Init]<BR>DUT register in 4G<BR>[Test Step]<BR>1. make MO CSFB call.<BR>2. Make sure device move to registered LAI oin 2/3G.<BR>3. Reject the CM Service / LU(with FOR) with cause#15.<BR>4. There should be other LAI present in the 2/3G.<BR>[Expected Result]<BR>Reattempt the CSFB voice call after CM Service rejected or LU(with FOR) rejected with Cause#15.<BR>[More],Pass,,,,
+5717,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_CSFB_DUPLEX_CHG_FOR_LG_MODE,modem_sbp_config[55].SBP_CSFB_DUPLEX_CHG_FOR_LG_MODE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable this SBP,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5718,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_CSFB_GSM_PREFER,modem_sbp_config[34].SBP_CSFB_GSM_PREFER,OTA and OTA BY OP,no,no,no,yes,Prefer GSM when CSFB.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Search GSM first when CSFB<BR>0:Search UMTS first when CSFB,,,This feature is configured by __CSFB_GSM_PREFER__.,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5719,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_CSFB_REDIRECT_TO_GSM_WITHOUT_REDI_INFO,modem_sbp_config[102].SBP_CSFB_REDIRECT_TO_GSM_WITHOUT_REDI_INFO,OTA and OTA BY OP,no,no,no,yes,"when NW doesn't config redirection list, using GSM ARFCNs got from SIB7 as redirection list.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP is present under compilation flag __CSFB_REDIRECT_TO_GSM_WITHOUT_REDI_INFO__ which is used in setting the SBP value.The compile option __CSFB_REDIRECT_TO_GSM_WITHOUT_REDI_INFO__ is used in enabling or disabling the feature.,,,,,enable the SBP & config SIB7 for the UE and do CSFB without Redirection info,Untested,,,,
+5720,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_CSFB_REJECT,modem_sbp_config[10].SBP_CSFB_REJECT,OTA and OTA BY OP,no,no,no,yes,"This feature is used to let UE search and camp on 2G and complete the call in the event UE is redirected to 3G due to MO call request initiated by the subscriber, and it can't find 3G signal or receives rrc connection reject without redirection information (due to congestion, for eg).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is enabled by the compile flag __CSFB_REJECT__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5721,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_CSG_RESTORE_DUPLICATED_SELECTION_MODE_WHEN_SWITCH_ON,modem_sbp_config[16].SBP_CSG_RESTORE_DUPLICATED_SELECTION_MODE_WHEN_SWITCH_ON,OTA and OTA BY OP,no,no,no,yes,"TS23.122 4.4.3.1.3.3: "If the MS is switched off while on the selected CSG and switched on again, the MS should return to the stored duplicate PLMN selection mode, unless the MS provides the optional feature of user preferred PLMN selection operating mode at switch on. Additionally, the MS shall use the stored duplicate value of RPLMN for further action"<BR>According to TS23.122 Rel-12 CR235, as given by TS 22.220 the PLMN different from RPLMN selected via manual CSG selection shall not be stored as last registered PLMN. In TS 23.122 this is implemented by storing the RPLMN to duplicate of RPLMN. At switch on, if switched off while on CSG coverage, the MS may use incorrect RPLMN.<BR>If enabling this SBP, the UE will return to the stored duplicate PLMN selection mode and restore the RPLMN from stored duplicate value of RPLMN when switch on.<BR>For instance, assume that <BR>1. UE is in auto selection mode and registered on 00101. (auto selection mode, RPLMN 00101)<BR>2. User manually select a CSG of PLMN 00102 and registers on it successfully (manual selection mode, CSG RPLMN 00102)<BR>3. Switch off and switch on UE<BR>If SBP is on, the network PLMN selection mode and RPLMN will be restored to auto selection mode and 00101, respectively. (auto selection mode, RPLMN 00101)<BR>If SBP is off, the network PLMN selection mode and RPLMN will keep the state before switch off. (manual selection mode, RPLMN 00102)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5722,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_CS_AUTHENTICATION_REJECT_PS_UNAFFECTED,modem_sbp_config[24].SBP_CS_AUTHENTICATION_REJECT_PS_UNAFFECTED,OTA and OTA BY OP,no,no,no,yes,This SBP make PS not affected while receiving CS authentication reject,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.This means that PS domain will not be affected by CS domain authentication reject<BR>0:Disabled. This means that PS domain will be affected by CS domain authentication reject,,,"To enable this feature, compile option __CS_AUTHENTICATION_REJECT_PS_UNAFFECTED__ must be defined",MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init]<BR>Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated<BR>[Test Step] <BR>Perform registration on 2G <BR>[Expected Result] <BR>After CS reject. UE able to register in PS domain",Pass,,,,
+5723,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_CS_CALL_PROTECTION_FROM_PS_PAGING,modem_sbp_config[41].SBP_CS_CALL_PROTECTION_FROM_PS_PAGING,OTA and OTA BY OP,no,no,no,yes,This SKT Korea Requirement is to ignore packet paging during ongoing Circuit switched call,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:MS will not ignore packed paging during ongoing CS call<BR>1:This SKT Korea Requirement is to ignore packet paging during ongoing Circuit switched call,,,"To enable this feature, compile option __MM_CS_CALL_PROTECTION_FROM_PS_PAGING__ must be defined",MD Config,Modem - Customer Requirement,,,na,Pass,,,,
+5724,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_CS_CALL_RETRY_MAX_TIMER,modem_sbp_config[76].SBP_CS_CALL_RETRY_MAX_TIMER,Not Support,no,no,no,yes,"Add a timer to control the whole process of call retry,the default value is 30s.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,30,,,"if compile option __CS_CALL_RETRY_MAX_TIMER__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5725,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_CT_RPLMN_ROAMING_SEARCH,modem_sbp_config[77].SBP_CT_RPLMN_ROAMING_SEARCH,OTA and OTA BY OP,no,no,no,yes,"For CT roaming case, apply MRU list search may lead to additional registration latency if user moves between different countries.<BR>Apply RPLMN search could improve registration latency but may cause CT official roaming testcase fail.",BIT,1,,1,DEFAULT_VALUE : 0<BR>__SBP_CT_RPLMN_ROAMING_SEARCH__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,"if compile option __SBP_CT_RPLMN_ROAMING_SEARCH__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+5726,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_CUSTOMIZED_IDLE_STRING_AS_CALL,modem_sbp_config[5].SBP_CUSTOMIZED_IDLE_STRING_AS_CALL,OTA and OTA BY OP,no,no,no,yes,This SBP is used to define specific string input in idle string that should be treated as call instead of USSD. This is as per the spec 22.030 Figure 3.5.3.2 .,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,The configuration of this SBP could be enabled by defining the compile option __CUSTOMIZED_IDLE_STRING_AS_CALL__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5727,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_CUSTOM_BAR_LTE_RESEL_FAIL_CELL,modem_sbp_config[102].SBP_CUSTOM_BAR_LTE_RESEL_FAIL_CELL,OTA and OTA BY OP,no,no,no,yes,"During intra-LTE reselection, there might exist case that when reslection criteria is satisfied as candidate but the target cell does not satisfy its SIB1 S-criteria.<BR>If this feature is turned on, UE would not camp on this cell and would try other candidates.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the custom bar LTE cell when reselection S-criteria fail<BR>0:Disable the custom bar LTE cell when reselection S-criteria fail,,,This SBP can be controlled by compile option __CUSTOM_BAR_LTE_RESEL_FAIL_CELL__,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
5728,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_CUSTOM_BSIC_READING_TIME_INTERVAL_IN_VIRTUAL_MODE,modem_sbp_config[78].SBP_CUSTOM_BSIC_READING_TIME_INTERVAL_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,Support GAS CUSTOM BSIC READING TIME INTERVAL in virtual mode,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Support CUSTOM BSIC READING TIME INTERVAL in virtual mode.<BR>0:Do not support CUSTOM BSIC READING TIME INTERVAL in virtual mode.,,,__CUSTOM_BSIC_READING_TIME_INTERVAL_IN_VIRTUAL_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5729,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_CUSTOM_FOR_BIT_SETTING,modem_sbp_config[60].SBP_CUSTOM_FOR_BIT_SETTING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet FOR bit in GMM Attach Request based on AT+EGTYPE command settingbit 0:0:Disable: MM maintain previous FOR (follow on req) flag in attach request although receiving new set value from AT+EGTYPEbit 1:1:Enabled :FOR(follow-on request) bit in GMM Attach Request is set based on last set value from AT+EGTYPE command",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If this feature is disabled, Before attach procedure finishes, MM should maintain the previous FOR flag (for SM sends PDP signaling) although receiving new set value from AT+EGTPYE command<BR>1:If this feature is enabled, FOR(follow-on request) bit in GMM Attach Request is set based on last set value from AT+EGTYPE command",,,__SBP_CUSTOM_FOR_BIT_SETTING__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) :10 mins <BR> [Init] <BR> [Test Step] Perform PS registration <BR> [Expected Result : UE send Attach request with latest FOR bit in EGTYPE AT command,Pass,,,,
-5730,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_CUSTOM_FPLMN_USED,modem_sbp_config[23].SBP_CUSTOM_FPLMN_USED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo avoid real network interrupting PCT test, add the real PLMNs to custom FPLMN list.bit 0:0:Turn-off. Not add custom FPLMNsbit 1:1:Turn-on. Add custom FPLMNs",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5731,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_CUSTOM_HANDLING_ADD_HPLMN_IN_GFPLMN,modem_sbp_config[39].SBP_CUSTOM_HANDLING_ADD_HPLMN_IN_GFPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAdd HPLMN to GPRS FPLMN LIST which would violate Spec.bit 0:0:Turn-off. Do not add HPLMN into GPRS FPLMN listbit 1:1:Turn-on. Add HPLMN into GPRS FPLMN list",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5732,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_CUSTOM_INDIA_SIM2_POWER_ON_SEARCH_RAT,modem_sbp_config[62].SBP_CUSTOM_INDIA_SIM2_POWER_ON_SEARCH_RAT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustom the power on search rat order when SIM2 is India SIMbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-5733,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_CUSTOM_PDP_ACT_RETRY_T3380_TIMER,modem_sbp_config[93].SBP_CUSTOM_PDP_ACT_RETRY_T3380_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow custom PDP activation retry T3380 timer valuebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): 30<BR>[Init]<BR>Ensured UE is powered on.<BR>Anite simulator is used.<BR>[Test Step]<BR>Enable data on mobile.<BR>Ensure NW simulator doesn't respond to PDP activation request.<BR>[Expected Result]<BR>PDP activation request should be retried with the custom T3380 timer value, instead of 30 seconds.",Pass,,,,
-5734,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_CUSTOM_PREFER_RPLMN_RAT,modem_sbp_config[73].SBP_CUSTOM_PREFER_RPLMN_RAT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePrefer RPLMN RAT while searching RPLMN if RPLMN is not in custom disable rplmn rat tablebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-5735,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_CUSTOM_QRXLEVL_QQUAL,modem_sbp_config[80].SBP_CUSTOM_QRXLEVL_QQUAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUsing customization qrxlevel and qqualbit 0:0:Turn-off. Use stored value from NVRAMbit 1:1:Turn-on. Not use stored value from NVRAM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__CUSTOM_QRXLEVL_QQUAL__,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
-5736,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_CUSTOM_QRXLEVMIN_OPTIMIZATION_3G_MODE,modem_sbp_config[87].SBP_CUSTOM_QRXLEVMIN_OPTIMIZATION_3G_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to configure QRXLEVMIN optimisation in 3G",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5737,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_CUSTOM_T3402_NW_DETACH_OTHER_CAUSE,modem_sbp_config[63].SBP_CUSTOM_T3402_NW_DETACH_OTHER_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustomized T3402 value for NW detach re-attach not required with some specific causebit 0:0:Disable. Follow spec handling.bit 1:1:Enabled. User can customize the T3402 length for NW detach with some specific cause.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. User can customize the T3402 length for NW detach with some specific cause.<BR>0:Disable. Follow spec handling.,,,__CUSTOM_T3402_NW_DETACH_OTHER_CAUSE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5738,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_DCM_ETWS_TEST_UE,modem_sbp_config[38].SBP_DCM_ETWS_TEST_UE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureStrict criteria to fulfill before receiveing LTE ETWS TEST message (ID: 0x1103)bit 0:0:Disablebit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5739,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_DCM_RELAX_NON_IMS_BACKOFF_TIMER_CONSTRAINT_IF_MOBILE_DATA_CHANGE,modem_sbp_config[82].SBP_DCM_RELAX_NON_IMS_BACKOFF_TIMER_CONSTRAINT_IF_MOBILE_DATA_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRelax the back-off timer constraints for non-IMS PDN when mobile data setting changesbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-5740,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_DEACTIVATE_C2K_WHEN_UIM_ERROR,modem_sbp_config[54].SBP_DEACTIVATE_C2K_WHEN_UIM_ERROR,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuremake C2K to deep sleep when UIM removedbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_DEACTIVATE_UICC_PRESENCE_DETECTION,modem_sbp_config[84].SBP_DEACTIVATE_UICC_PRESENCE_DETECTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureFor skip the UICC presence detectionbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-5742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_DEL_GUTI_FOR_NW_REL_AFTER_ATT_REQ,modem_sbp_config[88].SBP_DEL_GUTI_FOR_NW_REL_AFTER_ATT_REQ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDelete GUTI for NW release connecion right after ATTACH REQ was sentbit 0:0:Disable. Follow spec of NW release after ATTACH REQ handling.bit 1:1:Enabled. Delete GUTI for NW release after ATTACH REQ.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Delete GUTI for NW release after ATTACH REQ.<BR>0:Disable. Follow spec of NW release after ATTACH REQ handling.,,,__DEL_GUTI_FOR_NW_REL_AFTER_ATT_REQ__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5743,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_DEL_IDLE_MOBILITY_WHEN_SMC_REJECT,modem_sbp_config[72].SBP_DEL_IDLE_MOBILITY_WHEN_SMC_REJECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDelete idle mobility info when SMC verify failedbit 0:0:Disable, EMM does not delete idle mobility info when SMC verify failedbit 1:1:Enable, EMM will delete idle mobility info when SMC verify failed",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, EMM will delete idle mobility info when SMC verify failed.<BR>0:Disable, EMM does not delete idle mobility info when SMC verify failed.",,,__ENABLE_DEL_IDLE_MOBILITY_WHEN_SMC_REJECT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5744,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED,modem_sbp_config[65].SBP_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMap DETACH_REQ #7 or #8 to REATTACH_REQUIREDbit 0:0:Disable. Follow spec handling.bit 1:1:Enabled. Map DETACH_REQ #7 or #8 to REATTACH_REQUIRED.",BIT,1,,1,__DISABLE_LTE_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED__ : 0<BR>DEFAULT_VALUE : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Map DETACH_REQ #7 or #8 to REATTACH_REQUIRED.<BR>0:Disable. Follow spec handling.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5745,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_DETACH_WHEN_SET_RAT_G2L,modem_sbp_config[75].SBP_DETACH_WHEN_SET_RAT_G2L,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger detach when user set rat from G to Lbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Not to trrigger detach durng set rat mode.<BR>0x01:Trigger detach when user set rat from GSM to LTE.,,,__SBP_DETACH_WHEN_SET_RAT_G2L__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G<BR>-> Trigger RAT mode change from GSM to LTE <BR>->Observe UE should do detach for CS and PS domain<BR>[Expected Result]<BR>Observe UE should do detach for CS and PS domain,Untested,,,,
-5746,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_DETACH_WHEN_SET_RAT_G2W,modem_sbp_config[65].SBP_DETACH_WHEN_SET_RAT_G2W,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure detach to be triggered or not for user rat change from 2G to 3G when in configured PLMNbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0X0:Not ot trigger detach when user change rat from GSM to UMTS.<BR>0x1:Trigger detach when user change rat from GSM to UMTS,,,__SBP_DETACH_WHEN_SET_RAT_G2W__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G<BR>-> Trigger RAT mode change from GSM to UMTS <BR>->Observe UE should do detach to CS and PS <BR>[Expected Result]<BR>Observe UE should do detach to CS and PS,Untested,,,,
-5747,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_DETECT_SUITABLE_HPLMN,modem_sbp_config[101].SBP_DETECT_SUITABLE_HPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuredetect suitable hplmn, then choose hplmnbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-5748,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER,modem_sbp_config[20].SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot use 2-minute minimum HPPLMN timer.bit 0:0:Turn-off. Could use 2-minute HPPLMN timerbit 1:1:Turn-on. Not use 2-minute HPPLMN timer",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5749,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_DISABLE_4G_CSG,modem_sbp_config[11].SBP_DISABLE_4G_CSG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature4G CSG Support is Disabled bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Disable 4G CSG related function.<BR>0:Enable 4G CSG related function.,,,__DISABLE_4G_CSG__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5750,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_DISABLE_AUTO_RETURN_PRE_RPLMN,modem_sbp_config[0].SBP_DISABLE_AUTO_RETURN_PRE_RPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable the mechanism to automatically return to previous registered PLMN.bit 0:0:Turn-off. UE returns to previous RPLMNbit 1:1:Turn-on. UE does not return to previous RPLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_B17_IN_B12MFBI,modem_sbp_config[26].SBP_DISABLE_B17_IN_B12MFBI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNo Band 17 in Band 12 devicesbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__DISABLE_B17_IN_B12MFBI__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5752,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_B41_IN_NORTH_AMERICA,modem_sbp_config[83].SBP_DISABLE_B41_IN_NORTH_AMERICA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDsiable LTE band 41 in North Americabit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,,,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5753,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_DISABLE_BAND_BY_SIM_PLMN,modem_sbp_config[65].SBP_DISABLE_BAND_BY_SIM_PLMN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable bands according to SIM and Roaming status.bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5754,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_ALLOC,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_ALLOC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBearer Resouce Allocation Procedure is not supported by some network. By enabling SBP_DISABLE_BEARER_RSC_ALLOC, UE will omit doing Bearer Resouce Allocation Procedure with network.bit 0:0:Disable: UE can init Bearer Resouce Allocation Procedure to do EPS bearer operationbit 1:1:Enable: UE can NOT init Bearer Resouce Allocation Procedure to do EPS bearer operation",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init]<BR>When sbp default value is zero and NOT DOCOMO SIM card <BR>UE attached to LTE<BR>[Test Step] <BR>UE make Bearer Resouce Allocation Request<BR>[Expected Result]<BR>UE could make Bearer Resouce Allocation Request successfully,Pass,,,,
-5755,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_MOD,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_MOD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBearer Resouce Modification Procedure is not supported by some network. By enabling SBP_DISABLE_BEARER_RSC_MOD, UE will omit doing Bearer Resouce Modification Procedure with network.bit 0:0:Disable: UE can init Bearer Resouce Modification Procedure to do EPS bearer operationbit 1:1:Enable: UE can NOT init Bearer Resouce Modification Procedure to do EPS bearer operation",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init]<BR>When sbp default value is zero and NOT DOCOMO SIM card <BR>UE attached to LTE<BR>[Test Step] <BR>UE make Bearer Resouce Modification Request<BR>[Expected Result]<BR>UE could make Bearer Resouce Modification Request successfully,Pass,,,,
-5756,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_DISABLE_CSFB_PAGE_CSMT,modem_sbp_config[21].SBP_DISABLE_CSFB_PAGE_CSMT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure CSMT flag setting in 3G Paging Responsebit 0:0:Add CSMT flag in 3G Paging Responsebit 1:1:Do not add CSMT flag in 3G Paging Response",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5757,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_DISABLE_CS_DETACH_FOR_SET_MULTIRAT,modem_sbp_config[21].SBP_DISABLE_CS_DETACH_FOR_SET_MULTIRAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable CS detach when SetRat as 2/4G, 3/4G, 2/3/4Gbit 0:0:Nobit 1:1:Yes",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-5758,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_DISABLE_CTCH_IF_CONFLICT_WITH_BCH,modem_sbp_config[55].SBP_DISABLE_CTCH_IF_CONFLICT_WITH_BCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables disabling of CTCH if conflict with BCH",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5759,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_DISABLE_CUSTOMIZE_EHPLMN_DISPLAY_ROAMING,modem_sbp_config[39].SBP_DISABLE_CUSTOMIZE_EHPLMN_DISPLAY_ROAMING,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not regard as roaming when camping on customized EHPLMN.bit 0:0:Turn-off. Regard as roaming when camping on customized EHPLMNbit 1:1:Turn-on. Regard as on-HPLMN when camping on customized EHPLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-5760,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_DISABLE_DELETE_GPRS_CKSN_ON_GMM_DEREG,modem_sbp_config[38].SBP_DISABLE_DELETE_GPRS_CKSN_ON_GMM_DEREG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delete GPRS CKSN when GMM DEREG state as per R12<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Enable<BR>0x00:Disable,,,__UNIT_TEST__,,,,,NA,Pass,,,,
-5761,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_DISPLAY_ROAMING_HPLMN_IN_EPLMN,modem_sbp_config[2].SBP_DISABLE_DISPLAY_ROAMING_HPLMN_IN_EPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisplay roaming while HPLMN is assigned in equivalent PLMN list.bit 0:0:Turn-off. Display roaming while HPLMN is in EQPLMNsbit 1:1:Turn-on. Not display roaming while HPLMN is in EQPLMNs",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-5762,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_DISABLE_ELEVATOR_MODE,modem_sbp_config[99].SBP_DISABLE_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureElevator mode is enabledbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5763,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_ABNORMAL,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable EUTRAN after network abnormal failurebit 0:0:Turn-off. Not disable EUTRAN for the abnormal networkbit 1:1:Turn-on. Disable EUTRAN for the abnormal network",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5764,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_DISABLE_EUTRAN_AFTER_DETACH_NOT_REQ_ABNORMAL,modem_sbp_config[37].SBP_DISABLE_EUTRAN_AFTER_DETACH_NOT_REQ_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWith MT DETACH with re-attach not requirecd, UE attempts to select GERAN or UTRAN and disables EUTRANbit 0:0:Turn-off. Do not disable EUTRAN and select 23Gbit 1:1:Turn-on. Disable EUTRAN and select 23G",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable EUTRAN after network reject no suitable cause.bit 0:0:Turn-off. Not disable EUTRAN after rejection by no suitable cell causebit 1:1:Turn-on. Disable EUTRAN after rejection by no suitable cell cause",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5766,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED,modem_sbp_config[11].SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable EUTRAN after receiving reject cause #13 roaming-not-allowed.bit 0:0:Turn-off. Not disable EUTRAN after receiving #13bit 1:1:Turn-on. Disable EUTRAN after receiving #13",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5767,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_DISABLE_EUTRAN_MEAS_AND_REP_CAP,modem_sbp_config[8].SBP_DISABLE_EUTRAN_MEAS_AND_REP_CAP,OTA and OTA BY OP,no,no,no,yes,"UE sends "E-UTRA Measurement and Reporting support" capability as Supported in Classmark 3 if UE supports LTE. Based on this capability, Network might decide to do Handover to LTE or redirect to LTE.<BR>However some of the customer has requested that since this capability is not fully tested in network so if UE sends this capability to network then some unpredictable consequences seen.<BR>So to support this requirement from customer, MTK has introduced this SBP_DISABLE_EUTRAN_MEAS_AND_REP_CAP. When this SBP's value is 0, it means UE reports this capability in classmark 3 to network When this SBP's value is 1, it means UE doesn't report this capability in classmark 3 to network",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Disable E-UTRA Measurement and Reporting support in Classmark3<BR>0:Will not disable E-UTRA Measurement and Reporting support in Classmark3,,,__DISABLE_EUTRAN_MEAS_AND_REP_CAP__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5768,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_DISABLE_GMSS_ELEVATOR_MODE,modem_sbp_config[98].SBP_DISABLE_GMSS_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureGMSS Elevator mode is enabledbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5769,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_DISABLE_ISR_SUPPORT,modem_sbp_config[42].SBP_DISABLE_ISR_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to disable ISR support",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5770,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_DISABLE_L1_GSM_BAND_MASK,modem_sbp_config[96].SBP_DISABLE_L1_GSM_BAND_MASK,OTA and OTA BY OP,no,no,no,yes,UE will mask GSM bands from NVRAM_EF_AS_BAND_SETTING_LID and NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID and used them in modem.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Don't mask RRM and GL1 band. Use RRM supported GSM band in modem<BR>0:Mask RRM and GL1 GSM band and use them in modem,,,__DISABLE_L1_GSM_BAND_MASK__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5771,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_DISABLE_LAZY_GMM_FOR_MULTIPLE_PS,modem_sbp_config[43].SBP_DISABLE_LAZY_GMM_FOR_MULTIPLE_PS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureFor MultiplePS Lazy GMM Behaviorbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Enable<BR>0x00:Disable,,,,,,,,NA,Pass,,,,
-5772,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_DISABLE_LTE_B41,modem_sbp_config[23].SBP_DISABLE_LTE_B41,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable the LTE Band41 when UE stay out side of Japan.bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable this function.(Disable LTE Band 41 when UE stay out side of Japan.)<BR>0:Disable this function.,,,No,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
-5773,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_DISABLE_LTE_BAND_BY_PLMN,modem_sbp_config[68].SBP_DISABLE_LTE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable B7 & B38 under USA mcc.bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__DISABLE_B7B38_IN_USA__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins<BR>[Init] 1 LTE cell.<BR>[Test Step] <BR>1. Follow MCF RDIT SOP & Set SBP_DISABLE_LTE_BAND_BY_PLMN to 1,<BR>2. Enable B7 and B38 in Machine<BR>3. Set PLMN mcc to 310 in Machine<BR>4. UE tries to perform ATTACH <BR><BR>[Expected Result] <BR>UE should ... SBP set to 1.<BR>UE shall not camp on camp on B7 or B38 cells",Pass,,,,
-5774,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_LTE_TDD_BAND_IN_NORTH_AMERICA,modem_sbp_config[83].SBP_DISABLE_LTE_TDD_BAND_IN_NORTH_AMERICA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDsiable LTE TDD bands in North Americabit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> LTE TDD bands in North America is turn off<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5775,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_MMS_TIMER_BY_DEFAULT,modem_sbp_config[26].SBP_DISABLE_MMS_TIMER_BY_DEFAULT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable MMS timer for single MO SMSbit 0:0:Feature disabled. MMS Timer is Enabledbit 1:1:Feature enabled. MMS Timer is Disabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5776,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_DISABLE_MM_ELEVATOR_MODE,modem_sbp_config[98].SBP_DISABLE_MM_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMM Elevator mode is enabledbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,Elevator Mode feature,MTK Proprietary,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5777,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_MO_SMS_OVER_PS,modem_sbp_config[26].SBP_DISABLE_MO_SMS_OVER_PS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable MO SMS over PS domainbit 0:0:MO SMS over PS domain is allowedbit 1:1:MO SMS over PS domain is not allowed",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5778,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_DISABLE_MS_SUPPORT_OF_NETWORK_REQUESTED_BEARER_CONTROL_INDICATOR,modem_sbp_config[90].SBP_DISABLE_MS_SUPPORT_OF_NETWORK_REQUESTED_BEARER_CONTROL_INDICATOR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnabling or Disabling network bearer control modebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:SBP will be enabled which causes MS Support of Network Requested Bearer Control Indicator to be excluded in PCO Options as a part of PDP activate request.<BR>0x00:SBP will be disabled which causes MS Support of Network Requested Bearer Control Indicator to be included in PCO Options as a part of PDP activate request,,,,MD Config,Modem - Customer Requirement,,,1. UE should be camped in 23G/4G.<BR>2. Send PDP/PDN activate request.,Pass,,,,
-5779,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_DISABLE_NWSEL_MODE_SWITCH_OPTIMIZATION,modem_sbp_config[22].SBP_DISABLE_NWSEL_MODE_SWITCH_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not use previous RPLMN to speed up mode switch for duplex mode change.bit 0:0:Turn-on. Use previous RPLMN to speed up mode switchbit 1:1:Turn-on. Not use previous RPLMN to speed up mode switch",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5780,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_DISABLE_PARTIAL_BAND_BY_SIM_PLMN,modem_sbp_config[68].SBP_DISABLE_PARTIAL_BAND_BY_SIM_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable partial bands according to SIM and Roaming status.bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,__DISABLE_LTE_PARTIAL_BAND_BY_SIM_AND_PLMN__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5781,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_PLMNSEL_OPLMN_COEXIST,modem_sbp_config[2].SBP_DISABLE_PLMNSEL_OPLMN_COEXIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable ef_plmnsel and ef_oplmn both taking effectbit 0:0:Turn-off. ef_plmnsel and ef_oplmn both take effectbit 1:1:Turn-on. Disable ef_plmnsel and ef_oplmn both taking effect",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5782,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_PLMN_SEL_WHEN_ACCESS_BARRED,modem_sbp_config[2].SBP_DISABLE_PLMN_SEL_WHEN_ACCESS_BARRED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureallow UE to stay at access barred cell instead of searching other networks for normal service.bit 0:0:Turn-off. Search other networks for normal servicebit 1:1:Turn-on. Stay at access barred cell",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5783,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_DISABLE_PS_ATTACH_ON_NON_DATA_SIM_23G,modem_sbp_config[78].SBP_DISABLE_PS_ATTACH_ON_NON_DATA_SIM_23G,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMultiplePS Disable PS Attach on non Data SIM in 23Gbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:UE perform PS attach on non data SIM<BR>0x1:If enable MultiPS disable PS attach on non data SIM,,,__SBP_ENABLE_PS_ATTACH_ON_NON_DATASIM_ON_23G__,,,,,NA,Untested,,,,
-5784,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_DISABLE_RETRY_FOR_SAT_SMS,modem_sbp_config[87].SBP_DISABLE_RETRY_FOR_SAT_SMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable retry for STK SMS and immediately sends TERMINAL RESPONSEbit 0:0:Disable. Retry for the SMS from SATbit 1:1:Enabled. No Retry for the SMS from SAT",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5785,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_DISABLE_RPLMN_FROM_EPSLOCI,modem_sbp_config[6].SBP_DISABLE_RPLMN_FROM_EPSLOCI,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable the strategy that UE gets the RPLMN from EPSLOCI.bit 0:0:Turn-off. Allow to use RPLMN from EPSLOCIbit 1:1:Turn-on. Disable RPLMN from EPSLOCI",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1<BR>0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5786,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_RPLMN_FROM_GLOCI,modem_sbp_config[2].SBP_DISABLE_RPLMN_FROM_GLOCI,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable the strategy that UE gets the RPLMN from GLOCI.bit 0:0:Turn-off. Allow to use RPLMN from GLOCIbit 1:1:Turn-on. Disable RPLMN from GLOCI",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5729,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_CUSTOM_FOR_BIT_SETTING,modem_sbp_config[60].SBP_CUSTOM_FOR_BIT_SETTING,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, FOR(follow-on request) bit in GMM Attach Request is set based on last set value from AT+EGTYPE command.<BR>If this feature is disabled, Before attach procedure finishes, MM should maintain the previous FOR flag (for SM sends PDP signaling) although receiving new set value from AT+EGTPYE command. For more information about AT+EGTYPE command, please refer MTK AT command document",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If this feature is disabled, Before attach procedure finishes, MM should maintain the previous FOR flag (for SM sends PDP signaling) although receiving new set value from AT+EGTPYE command<BR>1:If this feature is enabled, FOR(follow-on request) bit in GMM Attach Request is set based on last set value from AT+EGTYPE command",,,"To enable this feature, compile option __SBP_CUSTOM_FOR_BIT_SETTING__ must be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) :10 mins <BR> [Init] <BR> [Test Step] Perform PS registration <BR> [Expected Result : UE send Attach request with latest FOR bit in EGTYPE AT command,Pass,,,,
+5730,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_CUSTOM_FPLMN_USED,modem_sbp_config[23].SBP_CUSTOM_FPLMN_USED,OTA and OTA BY OP,no,no,no,yes,"To avoid real network interrupting PCT test, we add the PLMN 46000,46001, and 46011 to forbidden PLMN list in customer file.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5731,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_CUSTOM_HANDLING_ADD_HPLMN_IN_GFPLMN,modem_sbp_config[39].SBP_CUSTOM_HANDLING_ADD_HPLMN_IN_GFPLMN,OTA and OTA BY OP,no,no,no,yes,This SBP is used to add HPLMN into the GPRS forbidden PLMN List. This SBP when enabled will avoid the UE to trigger repeated registration requests on the same HPLMN again and again until next power off or SET_RAT_MODE procedure. This SBP violates spec behavior but enhances user experience and saves battery power.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5732,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_CUSTOM_INDIA_SIM2_POWER_ON_SEARCH_RAT,modem_sbp_config[62].SBP_CUSTOM_INDIA_SIM2_POWER_ON_SEARCH_RAT,Not Support,no,no,no,yes,"If this SBP is turned on and SIM 2 is a India SIM, UE will use the customized search RAT order for power on search. This is because 3G NW quality is not good enough so that the power on search RAT can be configured to GSM first.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,"if compile option __CUSTOM_INDIA_SIM2_POWER_ON_SEARCH_RAT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+5733,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_CUSTOM_PDP_ACT_RETRY_T3380_TIMER,modem_sbp_config[93].SBP_CUSTOM_PDP_ACT_RETRY_T3380_TIMER,OTA and OTA BY OP,no,no,no,yes,"As per 24.008 section 11.2.3, the PDP activation retry timer (T3380) value specified is 30s. This SBP feature option allows to customize the PDP activation retry T3380 timer value. The custom PDP activation retry timer (T3380) value is taken from SM_CUSTOM_PDP_ACTIVATION_RETRY_T3380_TIMER_VALUE in custom_gprs_pdp_config.c. This feature option is disabled for test SIM and FTA mode(GCF configuration).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This feature can be enabled by compile option __SBP_CUSTOM_PDP_ACT_RETRY_T3380_TIMER__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): 30<BR>[Init]<BR>Ensured UE is powered on.<BR>Anite simulator is used.<BR>[Test Step]<BR>Enable data on mobile.<BR>Ensure NW simulator doesn't respond to PDP activation request.<BR>[Expected Result]<BR>PDP activation request should be retried with the custom T3380 timer value, instead of 30 seconds.",Pass,,,,
+5734,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_CUSTOM_PREFER_RPLMN_RAT,modem_sbp_config[73].SBP_CUSTOM_PREFER_RPLMN_RAT,Not Support,no,no,no,yes,"If the SBP is off, UE uses the prefer RAT setting from AP. (Usually the highest RAT) If the SBP is on, UE prefers the RPLMN while searching RPLMN. When the RAT mode is changed, UE still uses the prefer RAT to search RPLMN. This SBP is prior to SBP_PREFER_SEARCH_3G and SBP_PREFER_SEARCH_4G.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,"if compile option __CUSTOM_PREFER_RPLMN_RAT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+5735,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_CUSTOM_QRXLEVL_QQUAL,modem_sbp_config[80].SBP_CUSTOM_QRXLEVL_QQUAL,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to customize the Q-RxLevMin and Q-QualMin-r9 in LTE SystemInformationBlockType1 under Real SIM. Customized value is applied only when user enables this SBP and sets NVRAM simultaneously. NVRAM settings are in NVRAM_EF_ERRC_PERFORMANCE_PARA_LID (enable_cust_qrxlev/Q_rxlev_th/Q_rxlev_val/enable_cust_qqual/Q_qualmin_th/Q_qualmin_val), user can decide to enable Q-RxLevMin, Q-QualMin-r9 or both of them. For each of them, there are three configurable parameters: enabled boolean, threshold, applied value. <BR>1. Enabled boolean: the Q-RxLevMin or Q-QualMin-r9 can be customized.<BR>2. Threshold: if the value in SIB1 is more than the threshold value, applied value will be used.<BR>3. Applied value: the value is used to replace the one in SIB1.<BR>Once above conditions are satisfied, Q-RxLevMin and Q-QualMin-r9 are changed by applied value under real SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,User could use compile option __CUSTOM_QRXLEVL_QQUAL__ to switch the default setting of this SBP,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+5736,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_CUSTOM_QRXLEVMIN_OPTIMIZATION_3G_MODE,modem_sbp_config[87].SBP_CUSTOM_QRXLEVMIN_OPTIMIZATION_3G_MODE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5737,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_CUSTOM_T3402_NW_DETACH_OTHER_CAUSE,modem_sbp_config[63].SBP_CUSTOM_T3402_NW_DETACH_OTHER_CAUSE,OTA and OTA BY OP,no,no,no,yes,"For some temporary network issue, NW may send DETACH_REQ(re-attach not required, other cause that not defined in 5.5.2.3.2 of TS24.301) to UE. Then UE will start T3402(default 12 mins) and disable EUTRAN. This may become a bad user experience. <BR>MTK provides a workaround solution. If this SBP is enabled, user can customize the T3402 length for NW detach with some specific cause.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. User can customize the T3402 length for NW detach with some specific cause.<BR>0:Disable. Follow spec handling.,,,User could use compile option __CUSTOM_T3402_NW_DETACH_OTHER_CAUSE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5738,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_DCM_ETWS_TEST_UE,modem_sbp_config[38].SBP_DCM_ETWS_TEST_UE,OTA and OTA BY OP,no,no,no,yes,"This SBP defines a strict rule to receive LTE ETWS TEST message (message ID: 0x1103).<BR>When UE enable Message -> Setting -> CBS Service -> Setting -> Allow/Receive ETWS TEST Message, UE shall be able to receives LTE ETWS TEST message.<BR>However, some operators request UE to receive LTE ETWS TEST message only when the below criterias are fulfilled.<BR>1: is_etws_test_needed set to TRUE.<BR>2: SIM EFACC[15] = 1<BR>3: HPLMN<BR>When this SBP is set to OFF(0), UE can receive LTE ETWS TEST message as long as "Allow/Receive ETWS TEST message" set to TRUE without checking other criterias.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,User could use compile option __DCM_ETWS_TEST_UE__ to switch the setting of this SBP,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5739,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_DCM_RELAX_NON_IMS_BACKOFF_TIMER_CONSTRAINT_IF_MOBILE_DATA_CHANGE,modem_sbp_config[82].SBP_DCM_RELAX_NON_IMS_BACKOFF_TIMER_CONSTRAINT_IF_MOBILE_DATA_CHANGE,OTA and OTA BY OP,no,no,no,yes,"DOCOMO requires that when the mobile data setting changes from OFF to ON, the UE can send PDN Connectivity Request or Activate PDP Context Request for establishing non-IMS APN immedately even if the UE received PDN Connectivity Reject with any ESM causes or Activate PDP Context Reject with any SM causes previously.<BR>To realize this requirement, the back-off timer constraints for non-IMS PDNs will be relaxed when the mobile data changes from OFF to ON.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,This feature is controlled by __DCM_RELAX_NON_IMS_BACKOFF_TIMER_CONSTRAINT__.,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+5740,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_DEACTIVATE_C2K_WHEN_UIM_ERROR,modem_sbp_config[54].SBP_DEACTIVATE_C2K_WHEN_UIM_ERROR,Not Support,no,no,no,yes,"when UIM is removed, C2K must turn off itself to disconnect CS/PS service and save power. but CTC require MMI can still display ECC icon even when UIM is removed,So 1X can not be made to deep sleep. This SBP is used to control whether make C2K to deep sleep when UIM removed.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_DEACTIVATE_UICC_PRESENCE_DETECTION,modem_sbp_config[84].SBP_DEACTIVATE_UICC_PRESENCE_DETECTION,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether UICC presence detection is deactivated .<BR>If this feature is enabled, UICC presence detection is deactivated .<BR>If this feature is disabled,UICC presence detection is not deactivated .",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__DEACTIVATE_UICC_PRESENCE_DETECTION__,,,,,covered by SBP framework UT/IT result,Pass,,,,
+5742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_DEL_GUTI_FOR_NW_REL_AFTER_ATT_REQ,modem_sbp_config[88].SBP_DEL_GUTI_FOR_NW_REL_AFTER_ATT_REQ,OTA and OTA BY OP,no,no,no,yes,"For some NW's problem, NW could release RRC connecion right after ATTACH REQ was sent by UE. This will cause UE attempt to try ATTACH procedure 5 times and fall back to 2/3G.<BR>MTK provides a workaround solution. If this SBP is enabled and NW release the RRC connecion right after ATTACH REQ was sent by UE twice, EMM will delete GUTI and securty information, and try next ATTACH procedure with IMSI.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Delete GUTI for NW release after ATTACH REQ.<BR>0:Disable. Follow spec of NW release after ATTACH REQ handling.,,,User could use compile option __DEL_GUTI_FOR_NW_REL_AFTER_ATT_REQ__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5743,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_DEL_IDLE_MOBILITY_WHEN_SMC_REJECT,modem_sbp_config[72].SBP_DEL_IDLE_MOBILITY_WHEN_SMC_REJECT,OTA and OTA BY OP,no,no,no,yes,"In some networks, when UE performs TAU after UG to E, then the TAU will fail due to SMC verify failed. And After 5th TAU failure, UE will select to 2/3G. To avoid selecting to 2/3G, this SBP will delete idle mobility info when SMC verify failed , and then the next TAU will perform successfully.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, EMM will delete idle mobility info when SMC verify failed.<BR>0:Disable, EMM does not delete idle mobility info when SMC verify failed.",,,This feature is controlled by __ENABLE_DEL_IDLE_MOBILITY_WHEN_SMC_REJECT__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5744,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED,modem_sbp_config[65].SBP_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED,OTA and OTA BY OP,no,no,no,yes,"For some temporary network issue, NW may send DETACH_REQ(re-attach not required, cause #7/#8) to UE. Then UE may treat the SIM card as Invalid. This may become a bad user experience.<BR>MTK provides a workaround solution. If this SBP is enabled, UE will handle the DETACH_REQ(re-attach not required, cause #7/#8) as DETACH_REQ(re-attach required).",BIT,1,,1,__DISABLE_LTE_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED__ : 0<BR>DEFAULT_VALUE : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Map DETACH_REQ #7 or #8 to REATTACH_REQUIRED.<BR>0:Disable. Follow spec handling.,,,User could use compile option __DISABLE_LTE_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5745,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_DETACH_WHEN_SET_RAT_G2L,modem_sbp_config[75].SBP_DETACH_WHEN_SET_RAT_G2L,OTA,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Not to trrigger detach durng set rat mode.<BR>0x01:Trigger detach when user set rat from GSM to LTE.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G<BR>-> Trigger RAT mode change from GSM to LTE <BR>->Observe UE should do detach for CS and PS domain<BR>[Expected Result]<BR>Observe UE should do detach for CS and PS domain,Pass,,,,
+5746,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_DETACH_WHEN_SET_RAT_G2W,modem_sbp_config[65].SBP_DETACH_WHEN_SET_RAT_G2W,OTA,no,no,no,yes,"This SBP help to configure whether CS/PS detach should be performed or not when user change network mode preference from 2G only to 3G only RAT mode.<BR>- When enabled, the device shall perform CS/PS detach on 2G first and then perform CS/PS registration on 3G RAT.<BR>- This feature works only on the PLMNs which are specified in the CONFIGURE_USER_SET_RAT_DETACH_G2W_PLMN array. The array is configurable as part of MM custom file.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0X0:Not ot trigger detach when user change rat from GSM to UMTS.<BR>0x1:Trigger detach when user change rat from GSM to UMTS,,,"To enable this feature, compile option __ENABLE_DETACH_WHEN_SET_RAT_G2W__ must be defined.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G<BR>-> Trigger RAT mode change from GSM to UMTS <BR>->Observe UE should do detach to CS and PS <BR>[Expected Result]<BR>Observe UE should do detach to CS and PS,Pass,,,,
+5747,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_DETECT_SUITABLE_HPLMN,modem_sbp_config[101].SBP_DETECT_SUITABLE_HPLMN,OTA and OTA BY OP,no,no,no,yes,"In original flow, when DUT is in roaming, NWSEL will send plmn list ind. If there is home cell in plmn list, DUT with CMCC card will do duplex mode change to TDD to prepare for camping on cell. But in border area, the cell with hplmn may has weak signal and DUT may not camp on cell. Thus, DUT may change duplex mode again.<BR>When sbp __DETECT_SUITABLE_HPLMN__ is on, DUT with CMCC card will only do duplex mode change when detecting suitable hplmn.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This feature is controlled by __DETECT_SUITABLE_HPLMN__ flag,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+5748,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER,modem_sbp_config[20].SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER,OTA and OTA BY OP,no,no,no,yes,This SBP is to start the timer of higher priority PLMN search with 6-minute instead of 2-minute for the 1st higher priority PLMN search.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5749,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_DISABLE_4G_CSG,modem_sbp_config[11].SBP_DISABLE_4G_CSG,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to disable the 4G related CSG function.<BR>When SBP enable, The UE will disable 4G related CSG feature.<BR>When SBP disable, The UE will enable 4G related CSG feature.<BR>The 4G CSG feature include following functionalities:<BR>- Manual CSG selection.<BR>- CSG Autonomous Search.(Include Inter-RAT autonomous search.)<BR>- CSG fingerprint collection.(Include Inter-RAT fingerprint collection)<BR>- When 4G CSG disabled, Treat all CSG Identity as Non-white-list (Not in EF_ALLOWED_CSG_LIST / EF_OPERATOR_CSG_LIST).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Disable 4G CSG related function.<BR>0:Enable 4G CSG related function.,,,User could use compile option __DISABLE_4G_CSG__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5750,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_DISABLE_AUTO_RETURN_PRE_RPLMN,modem_sbp_config[0].SBP_DISABLE_AUTO_RETURN_PRE_RPLMN,OTA and OTA BY OP,no,no,no,yes,"After location registration fails on user selected PLMN, disable the mechanism to automatically return to previous registered PLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __DISABLE_AUTO_RETURN_PRE_RPLMN__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_B17_IN_B12MFBI,modem_sbp_config[26].SBP_DISABLE_B17_IN_B12MFBI,OTA and OTA BY OP,no,no,no,yes,This feature is used to disable Band 17 when Band 12 mfbi is supported.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,This feature is controlled by __DISABLE_B17_IN_B12MFBI__.,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5752,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_B41_IN_NORTH_AMERICA,modem_sbp_config[83].SBP_DISABLE_B41_IN_NORTH_AMERICA,OTA and OTA BY OP,no,no,no,yes,"Disable LTE band 41 in North America. If this feature is enabled, UE will not report and search LTE band 41",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,N/A,,,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5753,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_DISABLE_BAND_BY_SIM_PLMN,modem_sbp_config[65].SBP_DISABLE_BAND_BY_SIM_PLMN,Not Support,no,no,no,yes,"Disable LTE band according to serving plmn. <BR>- When the plmn in SIM card is belong to CMCC, CU or CT, and serving mcc is 460, the supported LTE band will be set according to the MTK provided LTE band database.<BR>- If the plmn in SIM card is not belong to CMCC, CU or CT, or serving mcc is not 460, the supported LTE band will be set with no customization.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,Feature could be enabled by enabling compiler option __SBP_DISABLE_BAND_BY_SIM_AND_PLMN__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5754,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_ALLOC,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_ALLOC,OTA and OTA BY OP,no,no,no,yes,"Bearer Resouce Allocation Procedure is not supported by some network. By enabling SBP_DISABLE_BEARER_RSC_ALLOC, UE will omit doing Bearer Resouce Allocation Procedure with network. Saying that if SBP_DISABLE_BEARER_RSC_ALLOC is on, EPS bearer operation will be controlled by the network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init]<BR>When sbp default value is zero and NOT DOCOMO SIM card <BR>UE attached to LTE<BR>[Test Step] <BR>UE make Bearer Resouce Allocation Request<BR>[Expected Result]<BR>UE could make Bearer Resouce Allocation Request successfully,Pass,,,,
+5755,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_MOD,modem_sbp_config[19].SBP_DISABLE_BEARER_RSC_MOD,OTA and OTA BY OP,no,no,no,yes,"Bearer Resouce Modification Procedure is not supported by some network. By enabling SBP_DISABLE_BEARER_RSC_MOD, UE will omit doing Bearer Resouce Modification Procedure with network. Saying that if SBP_DISABLE_BEARER_RSC_MOD is on, EPS bearer operation will be controlled by the network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init]<BR>When sbp default value is zero and NOT DOCOMO SIM card <BR>UE attached to LTE<BR>[Test Step] <BR>UE make Bearer Resouce Modification Request<BR>[Expected Result]<BR>UE could make Bearer Resouce Modification Request successfully,Pass,,,,
+5756,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_DISABLE_CSFB_PAGE_CSMT,modem_sbp_config[21].SBP_DISABLE_CSFB_PAGE_CSMT,Not Support,no,no,no,yes,This SBP disables CSMT bit in paging response while making CSFB MT call,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"To enable this feature, compile option __DISABLE_CSFB_PAGE_CSMT__ must be defined.",WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5757,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_DISABLE_CS_DETACH_FOR_SET_MULTIRAT,modem_sbp_config[21].SBP_DISABLE_CS_DETACH_FOR_SET_MULTIRAT,OTA and OTA BY OP,no,no,no,yes,"Per MTK design, UE will do CS detach when new rat mode was 2/4G, 3/4G or 2/3/4G during SET RAT mode procedure. If this SBP was enabled, UE won't do CS detach when SetRat as 2/4G, 3/4G, or 2/3/4G. Otherwise, UE will do CS detach when SetRat as 2/4G, 3/4G, or 2/3/4G.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __DISABLE_CS_DETACH_FOR_SET_MULTIRAT__ in makefile.,,,,,,Pass,,,,
+5758,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_DISABLE_CTCH_IF_CONFLICT_WITH_BCH,modem_sbp_config[55].SBP_DISABLE_CTCH_IF_CONFLICT_WITH_BCH,OTA and OTA BY OP,no,no,no,yes,"When this feature is enabled, CTCH will be disabled if it conflicts with BCH so as to prioritise System Information Reception.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is enabled by the compile flag __DISABLE_CTCH_IF_CONFLICT_WITH_BCH__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5759,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_DISABLE_CUSTOMIZE_EHPLMN_DISPLAY_ROAMING,modem_sbp_config[39].SBP_DISABLE_CUSTOMIZE_EHPLMN_DISPLAY_ROAMING,Not Support,no,no,no,yes,"When this SBP is enabled, do not regard as roaming when camping on customized EHPLMN. Default is enabled.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5760,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_DISABLE_DELETE_GPRS_CKSN_ON_GMM_DEREG,modem_sbp_config[38].SBP_DISABLE_DELETE_GPRS_CKSN_ON_GMM_DEREG,OTA and OTA BY OP,no,no,no,yes,Disable GPRS CKSN deletion on entering GMM-DEREGISTERED. This is to control the 3GPP release 12 CR (CP-140331 CR 2589) of deleting GPRS CKSN when entering GMM-DEREGISTERED state.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Enable<BR>0x00:Disable,,,N/A,,,,,NA,Pass,,,,
+5761,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_DISPLAY_ROAMING_HPLMN_IN_EPLMN,modem_sbp_config[2].SBP_DISABLE_DISPLAY_ROAMING_HPLMN_IN_EPLMN,OTA and OTA BY OP,no,no,no,yes,"From some regional operator leagues' requirement, do not display roaming when HPLMN is assigned in the equivalent PLMN list.<BR>For example, Assume that HPLMN is 00101 and UE camps on 00102 and EPLMN is 00101.<BR>If the SBP is on, UE does not show roaming.<BR>If the SBP is off, UE will show roaming.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __DISABLE_DISPLAY_ROAMING_HPLMN_IN_EPLMN__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+5762,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_DISABLE_ELEVATOR_MODE,modem_sbp_config[99].SBP_DISABLE_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,NWSEL will disable optimize search 4G procedure when leave elevator,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__SBP_DISABLE_ELEVATOR_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5763,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_ABNORMAL,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"This SBP is related to 3GPP TS24.301 CR1980. In order to prevent consistently reselection to non-suitable 4G cell, this SBP allow UE to disable EUTRA capability if the attempt counter reaches to 5 due to Attach/TAU abnormal case. For example, network rejects UE with ESM cause when APN for 4G is not configured correctly. In order to prevent reselection to 4G network, disable EUTRAN capability for the network.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __DO_NOT_DISABLE_EUTRAN_AFTER_ABNORMAL__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5764,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_DISABLE_EUTRAN_AFTER_DETACH_NOT_REQ_ABNORMAL,modem_sbp_config[37].SBP_DISABLE_EUTRAN_AFTER_DETACH_NOT_REQ_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"When receiving MT DETACH with REATTACH not required, according to TS24.301 R13 requirement, UE may attempt to select GERAN or UTRAN and proceed with MM or GMM specific procedure. In this case, the UE may disable the E-UTRA capability. This SBP is to define whether UE would select 23G and disable the EUTRAN capability.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE,modem_sbp_config[6].SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE,OTA and OTA BY OP,no,no,no,yes,"For non-4G subscription user, network might reject UE with #15 cause that no suitable cell exists. In order to prevent consistently reselection to non-suitable 4G cell, directly disable EUTRAN after rejection.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __DISABLE_EUTRAN_AFTER_NO_SUITABLE__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5766,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED,modem_sbp_config[11].SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED,OTA and OTA BY OP,no,no,no,yes,"For non-4G subscription user, network might reject UE with #13 roaming not allowed. In order to prevent consistently reselection to non-suitable 4G cell, directly disable EUTRAN after rejection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5767,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_DISABLE_EUTRAN_MEAS_AND_REP_CAP,modem_sbp_config[8].SBP_DISABLE_EUTRAN_MEAS_AND_REP_CAP,OTA and OTA BY OP,no,no,no,yes,"UE sends "E-UTRA Measurement and Reporting support" capability as Supported in Classmark 3 if UE supports LTE. Based on this capability, Network might decide to do Handover to LTE or redirect to LTE.<BR>However some of the customer has requested that since this capability is not fully tested in network so if UE sends this capability to network then some unpredictable consequences seen.<BR>So to support this requirement from customer, MTK has introduced this SBP_DISABLE_EUTRAN_MEAS_AND_REP_CAP. When this SBP's value is 0, it means UE reports this capability in classmark 3 to network When this SBP's value is 1, it means UE doesn't report this capability in classmark 3 to network",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Disable E-UTRA Measurement and Reporting support in Classmark3<BR>0:Will not disable E-UTRA Measurement and Reporting support in Classmark3,,,"Default value depends on compilation flag, __DISABLE_EUTRAN_MEAS_AND_REP_CAP__, if this flag is define, then default value 1 otherwise 0",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5768,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_DISABLE_GMSS_ELEVATOR_MODE,modem_sbp_config[98].SBP_DISABLE_GMSS_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,GMSS will disable optimize search 4G procedure when leave elevator,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,__SBP_DISABLE_GMSS_ELEVATOR_MODE__,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5769,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_DISABLE_ISR_SUPPORT,modem_sbp_config[42].SBP_DISABLE_ISR_SUPPORT,OTA and OTA BY OP,no,no,no,yes,This feature is used to control ISR support in LTE RAT,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is enabled by the compile flag __DISABLE_ISR_SUPPORT__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5770,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_DISABLE_L1_GSM_BAND_MASK,modem_sbp_config[96].SBP_DISABLE_L1_GSM_BAND_MASK,OTA and OTA BY OP,no,no,no,yes,UE will mask GSM bands from NVRAM_EF_AS_BAND_SETTING_LID and NVRAM_EF_L1_CUSTOM_BAND_SUPPORT_LID and used them in modem.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Don't mask RRM and GL1 band. Use RRM supported GSM band in modem<BR>0:Mask RRM and GL1 GSM band and use them in modem,,,"if compile option __DISABLE_L1_GSM_BAND_MASK__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5771,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_DISABLE_LAZY_GMM_FOR_MULTIPLE_PS,modem_sbp_config[43].SBP_DISABLE_LAZY_GMM_FOR_MULTIPLE_PS,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, for Multiple PS, GMM shall disable lazy beahvior, i.e cell support for PS shall not be invalidated.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Enable<BR>0x00:Disable,,,N/A,,,,,NA,Pass,,,,
+5772,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_DISABLE_LTE_B41,modem_sbp_config[23].SBP_DISABLE_LTE_B41,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to decide if need to disable the LTE Band41 when UE stay out side of Japan.<BR>When SBP enable, The UE will disable LTE Band 41 when stay out side of Japan.<BR>When SBP disable, The UE keep original behavior when stay out side of Japan.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable this function.(Disable LTE Band 41 when UE stay out side of Japan.)<BR>0:Disable this function.,,,N/A,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+5773,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_DISABLE_LTE_BAND_BY_PLMN,modem_sbp_config[68].SBP_DISABLE_LTE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,Disable B7 and B38 under USA mcc.<BR>- Federal Communications Commision(FCC) announces that band 7 and band 38 is not allowed to be accessed in U.S.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,Feature could be enabled by enabling compiler option __DISABLE_B7B38_IN_USA__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins<BR>[Init] 1 LTE cell.<BR>[Test Step] <BR>1. Follow MCF RDIT SOP & Set SBP_DISABLE_LTE_BAND_BY_PLMN to 1,<BR>2. Enable B7 and B38 in Machine<BR>3. Set PLMN mcc to 310 in Machine<BR>4. UE tries to perform ATTACH <BR><BR>[Expected Result] <BR>UE should ... SBP set to 1.<BR>UE shall not camp on camp on B7 or B38 cells",Pass,,,,
+5774,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_LTE_TDD_BAND_IN_NORTH_AMERICA,modem_sbp_config[83].SBP_DISABLE_LTE_TDD_BAND_IN_NORTH_AMERICA,OTA and OTA BY OP,no,no,no,yes,Dsiable LTE TDD bands in North America,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> LTE TDD bands in North America is turn off<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5775,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_MMS_TIMER_BY_DEFAULT,modem_sbp_config[26].SBP_DISABLE_MMS_TIMER_BY_DEFAULT,OTA and OTA BY OP,no,no,no,yes,"The feature is used in SMS. If this feature is enabled, UE will not start MMS timer for sending single MO SMS. For detail of MMS timer, we can refer to 3GPP TS 27.005, chapter 3.5.6. This timer will work only when AT+CMMS=1 or 2.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,The setting of this SBP could be set to "enable" by defining compile option __DISABLE_MMS_TIMER_BY_DEFAULT__ in the makefile,,,,,,Pass,,,,
+5776,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_DISABLE_MM_ELEVATOR_MODE,modem_sbp_config[98].SBP_DISABLE_MM_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,MM will disable trigger EAFR for elevator mode,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__SBP_DISABLE_MM_ELEVATOR_MODE__,Elevator Mode feature,MTK Proprietary,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5777,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_MO_SMS_OVER_PS,modem_sbp_config[26].SBP_DISABLE_MO_SMS_OVER_PS,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, UE cannot send MO SMS over PS domain, but still can receive SMS from PS domain.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This feature is controlled by compile time option __MO_SMS_DISABLED_OVER_PS__.,,,,,,Pass,,,,
+5778,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_DISABLE_MS_SUPPORT_OF_NETWORK_REQUESTED_BEARER_CONTROL_INDICATOR,modem_sbp_config[90].SBP_DISABLE_MS_SUPPORT_OF_NETWORK_REQUESTED_BEARER_CONTROL_INDICATOR,OTA and OTA BY OP,no,no,no,yes,"In 23G, disabling MS Support of Network Requested Bearer Control Indicator in PCO options(Section 10.5.6.3 as part of 24.008 spec) of Activate PDP context is handled through this SBP.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:SBP will be enabled which causes MS Support of Network Requested Bearer Control Indicator to be excluded in PCO Options as a part of PDP activate request.<BR>0x00:SBP will be disabled which causes MS Support of Network Requested Bearer Control Indicator to be included in PCO Options as a part of PDP activate request,,,This feature is controlled by __SBP_DISABLE_MS_SUPPORT_OF_NETWORK_REQUESTED_BEARER_CONTROL_INDICATOR__,MD Config,Modem - Customer Requirement,,,1. UE should be camped in 23G/4G.<BR>2. Send PDP/PDN activate request.,Pass,,,,
+5779,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_DISABLE_NWSEL_MODE_SWITCH_OPTIMIZATION,modem_sbp_config[22].SBP_DISABLE_NWSEL_MODE_SWITCH_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,Do not use previous RPLMN to speed up mode switch for duplex mode change.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"To enable this feature,we could use compile option __DISABLE_NWSEL_MODE_SWITCH_OPTIMIZATION__to let the setting of this SBP be enable by default.",MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5780,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_DISABLE_PARTIAL_BAND_BY_SIM_PLMN,modem_sbp_config[68].SBP_DISABLE_PARTIAL_BAND_BY_SIM_PLMN,OTA and OTA BY OP,no,no,no,yes,"Disable partial LTE band according to serving plmn and SIM card. <BR>- If the serving mcc is 460 and SIM card is belong to CU/CT/CMCC, UE will disabled partial band accorting to custom setting table(CUSTOM_PARTIAL_BAND_INFO_TBL) in custom_eas_config.c<BR>- If the plmn in SIM card is not belong to CMCC, CU or CT, or serving mcc is not 460, the supported LTE partial band will be set with no customization.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,Feature could be enabled by enabling compiler option __DISABLE_LTE_PARTIAL_BAND_BY_SIM_AND_PLMN__ .Please make sure that the custom configuration is correct in CUSTOM_PARTIAL_BAND_INFO_TBL in custom_eas_config.c,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5781,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_PLMNSEL_OPLMN_COEXIST,modem_sbp_config[2].SBP_DISABLE_PLMNSEL_OPLMN_COEXIST,OTA and OTA BY OP,no,no,no,yes,"If a SIM contains both ef_plmnsel and ef_oplmn, UE would take both file as valid. However, according to TS23.122, it should not. <BR>When the SBP is turn-on, then disable ef_plmnsel and ef_oplmn both taking effect.<BR>When the SBP is turn-off, then ef_plmnsel and ef_oplmn both take effect.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __DISABLE_PLMNSEL_OPLMN_COEXIST__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5782,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_PLMN_SEL_WHEN_ACCESS_BARRED,modem_sbp_config[2].SBP_DISABLE_PLMN_SEL_WHEN_ACCESS_BARRED,OTA and OTA BY OP,no,no,no,yes,"By default, UE searches other network for normal service instead of stay at access class barred network. This SBP allows UE to stay at access class barred cell.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __DISABLE_PLMN_SEL_WHEN_ACCESS_BARRED__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5783,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_DISABLE_PS_ATTACH_ON_NON_DATA_SIM_23G,modem_sbp_config[78].SBP_DISABLE_PS_ATTACH_ON_NON_DATA_SIM_23G,Not Support,no,no,no,yes,The SBP controls whether to perform PS Attach in 23G (WG) on non Data SIM when Multiple PS feature is supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:UE perform PS attach on non data SIM<BR>0x1:If enable MultiPS disable PS attach on non data SIM,,,"if compile option __SBP_ENABLE_PS_ATTACH_ON_NON_DATA_SIM_23G__ is defined, the SBP is disabled",,,,,NA,Untested,,,,
+5784,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_DISABLE_RETRY_FOR_SAT_SMS,modem_sbp_config[87].SBP_DISABLE_RETRY_FOR_SAT_SMS,OTA and OTA BY OP,no,no,no,yes,This SBP feature Disables retry for STK SMS and immediately sends TERMINAL RESPONSE,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This feature is controlled by __DISABLE_RETRY_FOR_SAT_SMS__.,,,,,,Pass,,,,
+5785,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_DISABLE_RPLMN_FROM_EPSLOCI,modem_sbp_config[6].SBP_DISABLE_RPLMN_FROM_EPSLOCI,Not Support,no,no,no,yes,"A similar feature to SBP_DISABLE_RPLMN_FROM_GLOCI, except that the disable target is EPSLOCI.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1<BR>0,,,"This feature is controlled by __DISABLE_RPLMN_FROM_EPSLOCI__.Currently this SBP is not used. Only SBP_DISABLE_RPLMN_FROM_GLOCI is for special SIM test case.When both SBP are disable, UE will not use RPLMN from NVRAM EPSLOCI and NVRAM GLOCI for Vodafone STK SoR_based_on_SIM_OTA test case.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5786,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_DISABLE_RPLMN_FROM_GLOCI,modem_sbp_config[2].SBP_DISABLE_RPLMN_FROM_GLOCI,Not Support,no,no,no,yes,"Some operator doesn't expect MS will read the RPLMN information from GPRS LOCI, so need an SBP to switch on/off this feature. This SBP is to disable the strategy that UE gets the RPLMN from GLOCI for some operators requirements.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,The is related to SBP_DISABLE_RPLMN_FROM_EPSLOCIThis feature is controlled by __DISABLE_RPLMN_FROM_GLOCI__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
5787,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_DISABLE_RPLMN_FROM_HISTORY_TABLE,modem_sbp_config[22].SBP_DISABLE_RPLMN_FROM_HISTORY_TABLE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot use RPLMN from history table.bit 0:0:Turn-off. Could use RPLMN from history tablebit 1:1:Turn-on. Not use RPLMN from history table",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5788,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_DISABLE_SKIP_NEW_FPLMN_MANUAL_RESEL,modem_sbp_config[5].SBP_DISABLE_SKIP_NEW_FPLMN_MANUAL_RESEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable skipping new FPLMN when manual reselection.bit 0:0:Turn-off. Skip new FPLMN when manual reselectionbit 1:1:Turn-on. Not skip newe FPLMN when manual reselection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5789,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_SMS_RETRY,modem_sbp_config[26].SBP_DISABLE_SMS_RETRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable MO SMS retrybit 0:0:Enable MO SMS retrybit 1:1:Disable MO SMS retry",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5790,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_SON_RACH_REPORT,modem_sbp_config[83].SBP_DISABLE_SON_RACH_REPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTurn off SON RACH Report capabilitybit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable ==> not report rach-Report-r9 capability as supported to Network,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5791,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_DISABLE_T3402_OPTIMIZATION,modem_sbp_config[69].SBP_DISABLE_T3402_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable T3402 optimiztionbit 0:0:Not disabled optimizationbit 1:1:Disabled optimization",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,__SBP_DISABLE_T3402_OPTIMIZATION__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5792,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_DISABLE_TIMER_T3417EXT_MT,modem_sbp_config[101].SBP_DISABLE_TIMER_T3417EXT_MT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTimer T3417EXT_MT is enablebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_DISABLE_TIMER_T3417EXT_MT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5793,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_TM9,modem_sbp_config[83].SBP_DISABLE_TM9,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable tm9 related fgi bitbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enabled ==> turn off tm9,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5794,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_DISABLE_UL64QAM_WHEN_CA_DISABLED,modem_sbp_config[70].SBP_DISABLE_UL64QAM_WHEN_CA_DISABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuredisable ul64qam when CA disabledbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5795,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_DISCARD_MTSMS_WITH_SIM_DATA_DOWNLOAD_AND_DCS_NOT_0XF6,modem_sbp_config[25].SBP_DISCARD_MTSMS_WITH_SIM_DATA_DOWNLOAD_AND_DCS_NOT_0XF6,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDiscard MT SMS with PID=SIM data download(0x7f) and DCS!=0xf6bit 0:0:Disabled. When UE receives MT SMS, it will not discard the MT SMS with PID= 0x7f (SIM data download) and DCS!=0xf6 (8-bit data, class 2 message)bit 1:1:Enabled. When UE receives MT SMS, it will discard the MT SMS with PID= 0x7f (SIM data download) and DCS!=0xf6 (8-bit data, class 2 message)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5796,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_DISCARD_NAS_MSG_LIST_INT_FAIL,modem_sbp_config[36].SBP_DISCARD_NAS_MSG_LIST_INT_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDiscard NAS message list when integrity check failedbit 0:0:Disabled. NOT discard NAS message list when integrity check failedbit 1:1:Enabled. Discard NAS message list when integrity check failed",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will set attach attempt counter to MAX and start T3402 when UE receives an ATTACH reject with cause #19.<BR>0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5797,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_DISPLAY_ALL_EHPLMN_REGARDLESS_OF_SIM_CONFIG,modem_sbp_config[94].SBP_DISPLAY_ALL_EHPLMN_REGARDLESS_OF_SIM_CONFIG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisplay all EHPLMN regardless of SIM configurationbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-5798,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_DISPLAY_ALL_EHPLMN_WHEN_NO_PREFERENCE,modem_sbp_config[74].SBP_DISPLAY_ALL_EHPLMN_WHEN_NO_PREFERENCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisplay all EHPLMN when EF_EHPLMNPI is set to 0 (no preference)bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5799,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_DISPLAY_LOSS_WHEN_CONNECTED_MODE_OOS,modem_sbp_config[80].SBP_DISPLAY_LOSS_WHEN_CONNECTED_MODE_OOS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurenon-support Do not display of loss in network in connected mode OOSbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5800,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_DOCOMO_IOT_CC,modem_sbp_config[4].SBP_DOCOMO_IOT_CC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureHandle primitive facility after or before peer connect ack for Docomo IOTbit 0:0:FACILITY will be sent before CONNECT ACKbit 1:1:FACILITY will be sent after CONNECT ACK",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-5801,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_DOCOMO_IOT_SMS,modem_sbp_config[4].SBP_DOCOMO_IOT_SMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable MO SMS Retry for Docomo IOT testbit 0:0:Don't allow the SMS to be retriedbit 1:1:Allow the SMS to be retried",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5802,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_DONT_DELETE_FORBIDDEN_LA_LIST_IN_RFOFF_CAUSE_SIM_SWITCH,modem_sbp_config[99].SBP_DONT_DELETE_FORBIDDEN_LA_LIST_IN_RFOFF_CAUSE_SIM_SWITCH,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDon't delete the forbidden la list in RFOFF cause SIM SWITCHbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:if disable, LA list shall be deleted when rfodd reques comes.<BR>0x1:if enable ,when Rf off request comes with cause SIM SWITCH then forbidden LA list shall not be deleted.",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G<BR>-> Trigger RF OFF with cause RFOFF_CAUSE_SIM_SWITCH <BR>[Expected Result]<BR>Observe UE should not delete the forbidden la list in RFOFF,Untested,,,,
-5803,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_DO_NOT_CLEAR_CS_FPLMN_FOR_RAT_MODE_CHANGE,modem_sbp_config[28].SBP_DO_NOT_CLEAR_CS_FPLMN_FOR_RAT_MODE_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not clear CS forbidden PLMN list on RAT mode change.bit 0:0:Turn-off. Clear CS FPLMN on RAT changebit 1:1:Turn-on. Do not clear CS FPLMN on RAT change",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5804,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_DO_NOT_LIST_LTE_WHEN_NOT_POSSIBLE,modem_sbp_config[41].SBP_DO_NOT_LIST_LTE_WHEN_NOT_POSSIBLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not perform manual list operatio on LTE, if inserted is not USIM.bit 0:0:Turn-off. List LTE RAT if inserted SIM is not USIMbit 1:1:Turn-on. Do not list LTE RAT if inserted SIM is not USIM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5805,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_DO_NOT_SEARCH_23G_LTE_ONLY_NETWORK,modem_sbp_config[63].SBP_DO_NOT_SEARCH_23G_LTE_ONLY_NETWORK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not search 23G networks for normal service for LTE_ONLY_SIMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5806,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_DO_NOT_START_TD_DISABLE_TIMER,modem_sbp_config[25].SBP_DO_NOT_START_TD_DISABLE_TIMER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not start EUTRAN TD disable timerbit 0:0:Turn-off. Start EUTRAN TD disable timerbit 1:1:Turn-on. Not start EUTRAN TD disable timer",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-5807,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_DR_DSDS,modem_sbp_config[96].SBP_DR_DSDS,OTA,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureDR-DSDS feature supportbit 0:0:Disable DR-DSDSbit 1:1:Enable DR-DSDS under supported band/RAT combination",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,N+L DR-DSDS,Multiple SIM,,,"Test in machine : N<BR>Test Time (minutes) : 10<BR>[Init] Dual SIM register to SA and LTE NW seperately.<BR>[Test Step] one SIM in connected mode, check gemini gap status when another SIM in idle mode perform PCH monitoring<BR>[Expected Result]<BR>No gemini gap when idle SIM monitor PCH under supported RAT/band combination",Untested,,,,
-5808,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_DSDA,modem_sbp_config[96].SBP_DSDA,OTA,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureDSDA feature supportbit 0:0:Disable DSDAbit 1:1:Enable DSDA under supported band/RAT combination",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,SA+L DSDA,Multiple SIM,,,Test in machine : N<BR>Test Time (minutes) : 10<BR>[Init] Dual SIM register to SA and LTE seperately.<BR>[Test Step] One SIM SA ping and another SIM make VoLTE call.<BR>[Expected Result]<BR>SA ping and LTE VoNR call can be performed in parallel under supported band combination,Untested,,,,
-5809,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_DUAL_PRIORITY_FEATURE_ENABLED,modem_sbp_config[88].SBP_DUAL_PRIORITY_FEATURE_ENABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether to enable dual priority feature or notbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled.<BR>1:Enabled.,,,__SBP_DUAL_PRIORITY_FEATURE_ENABLED__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5810,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_DUPLEX_MODE_CHG_AFTER_CSFB,modem_sbp_config[56].SBP_DUPLEX_MODE_CHG_AFTER_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDuplex mode change after CSFBbit 0:0:Not enabled : Do not change the Duplex mode after CSFBbit 1:1:Enabled : Duplex mode change after CSFB",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:This feature is valid only when UE is running under LG+WG mode. In some CMCC networks the CSFB call will be redirected to TDS instead of GSM,,,__ENABLE_DUPLEX_MODE_CHG_AFTER_CSFB__,L+W (1.0),Multiple SIM,,,NA,Pass,,,,
-5811,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_DUPLEX_MODE_SWITCH_IN_LIMITED_SERVICE,modem_sbp_config[22].SBP_DUPLEX_MODE_SWITCH_IN_LIMITED_SERVICE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDuplex mode switch in limited servicebit 0:0:Disable TDCDMA/WCDMA Duplex Mode Switch in Limited Servicebit 1:1:Enable TDCDMA/WCDMA Duplex Mode Switch in Limited Service",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5812,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_DYNAMICALLY_EXTEND_PAGING_PROTECT_TIMER,modem_sbp_config[91].SBP_DYNAMICALLY_EXTEND_PAGING_PROTECT_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport dynamically extend paging protect timerbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__DISABLE_SBP_DYNAMICALLY_EXTEND_PAGING_PROTECT_TIMER__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5813,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_DYNAMIC_APPLMN_LIST,modem_sbp_config[16].SBP_DYNAMIC_APPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable Dynamic APPLMN list mechanism: support dynamic APPLMN updated when UE registers on VPLMN.bit 0:0:Disabled. Not apply dynamic APPLMN list mechanismbit 1:1:Enabled. Apply dynamic APPLMN list mechanism",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5814,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_DYNAMIC_SBP,modem_sbp_config[21].SBP_DYNAMIC_SBP,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureFeature option to dynamically configure settings according to inserted SIMbit 0:0:Disabled. Modme configures settings according to the SBP ID from CCCI during boot-upbit 1:1:Enabled. Modem configures settings according to both SBP ID from CCCI and SBP ID computed from inserted SIM",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,NA,,,,,,,,NA,Untested,,,,
-5815,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_DYNAMIC_UE_SPECIFIC_DRX,modem_sbp_config[27].SBP_DYNAMIC_UE_SPECIFIC_DRX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChange UE specific DRX paramter dynamicallybit 0:0:Disable. UE's DRX parameter cannot changebit 1:1:Enabled. UE's DRX parameter can change dynamically",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE's DRX parameter can change dynamically.<BR>0:Disable. UE's DRX parameter cannot change.,,,__SBP_DYNAMIC_UE_SPECIFIC_DRX__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5816,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_EARLY_REPORT_PS_REG_STATUS,modem_sbp_config[36].SBP_EARLY_REPORT_PS_REG_STATUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport earlier CGREG with new cell information during IRATbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-5817,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_EARLY_RLF_IF_NW_RELEASE,modem_sbp_config[92].SBP_EARLY_RLF_IF_NW_RELEASE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable early RLF if NW release connectionbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,WCDMA Protocol (R8 Baseline),3G,,,Make SIR < -96dBm in connected state when<BR>1. Ecno>-10dBm<BR>2. Gemini suspension% < 30%<BR>3. PLMN is present in custom list<BR>Then RLF will happen with customized t313 value.<BR>This early RLF feature will hit only for customized PLMNs. This feature is customer requirement and customer verified it.,Untested,,,,
-5818,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_EAS_REDUCE_VIDLE_TAU,modem_sbp_config[81].SBP_EAS_REDUCE_VIDLE_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEAS reduce V-IDLE TAUbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5819,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_ECBM_ENABLE,modem_sbp_config[28].SBP_ECBM_ENABLE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLY. User could refer to NVRAM_EF_VDM_ADS_PROFILE_LID for the same funtionality.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-5820,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_ECC_FORCE_IMS_CELL,modem_sbp_config[79].SBP_ECC_FORCE_IMS_CELL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLimited service force ERRC to find IMS support cellbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-5821,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_ECC_NOT_PREEMPT_SEARCH,modem_sbp_config[15].SBP_ECC_NOT_PREEMPT_SEARCH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEmergency call not preempt search procedure.bit 0:0:Turn-off. ECC could preempt searchbit 1:1:Turn-on. ECC not preempt search",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-5822,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_ECSFB,modem_sbp_config[65].SBP_ECSFB,OTA and OTA BY OP,no,no,no,yes,CSFB enhancement: LAU reduction while MO/MT CSFB from LTE to GSM. This feature gives more preference to GSM cell with same LA as TA of LTE cell during cell search.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will give preference to GSM cell of same LA as TA of LTE cell.<BR>0:GSM will follow 3GPP and RR will use redirection list as provided by network during cell search.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5823,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_ECSFB_ENHANCED_ASSOCIATION_OF_24G_CELLS,modem_sbp_config[89].SBP_ECSFB_ENHANCED_ASSOCIATION_OF_24G_CELLS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurenot add 2G serving cell and 4G target cell to eCSFB association listbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-5824,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_EDALLOW_RE_ATTACH,modem_sbp_config[91].SBP_EDALLOW_RE_ATTACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable EDALLOW re-attach feature bit<BR>purpose: to do edallow re-attach procedure<BR>use time: Original data SIM (SIM1) receive LTE PS paging (for DL data from network side) which interrupt new data SIM (SIM2) data service, MMS can't be sent, Web browsing slow, etc.<BR>how to use: switch data SIM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (N) N<BR> Test Time (20 minutes) <BR> [Init] poweron PS register with dual SIM in L+W mode<BR> [Test Step] switch data SIM from SIM1 to SIM2, and use SIM2 do surf the net<BR> [Expected Result]<BR>the throughput in SIM2 is normal",Pass,,,,
-5825,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_EL1C_ALL_MEAS_OPT,modem_sbp_config[32].SBP_EL1C_ALL_MEAS_OPT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. No need after UMOLYAbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5788,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_DISABLE_SKIP_NEW_FPLMN_MANUAL_RESEL,modem_sbp_config[5].SBP_DISABLE_SKIP_NEW_FPLMN_MANUAL_RESEL,OTA and OTA BY OP,no,no,no,yes,"When manual reselection and then receiving reject cause #11, the UE skips all rat of new FPLMN to speed up PLMN selection.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5789,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_DISABLE_SMS_RETRY,modem_sbp_config[26].SBP_DISABLE_SMS_RETRY,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, MO SMS retry at TL layer is disabled. Also when this feature is enabled, the retry count at CM layer(TC1) is increased to 2(default = 1) and TC1M timer value is reduced to 16sec(default = 21sec)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,The setting of this SBP could be set to "enable" by defining compile option __DISABLE_SMS_RETRY__ in the makefile,,,,,,Pass,,,,
+5790,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_SON_RACH_REPORT,modem_sbp_config[83].SBP_DISABLE_SON_RACH_REPORT,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to not report rach-Report-r9 capability as supported to Network when DTAG SIM is inserted. In DTAG requirement, it want to disable LTE SON RACH report when DTAG SIM is inserted.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable ==> not report rach-Report-r9 capability as supported to Network,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5791,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_DISABLE_T3402_OPTIMIZATION,modem_sbp_config[69].SBP_DISABLE_T3402_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"In TS24.301, it doesn't identify when to stop T3402 clearly. In MTK's implementation, we let UE try the attach procedure once the TAI changed although the T3402 is running.<BR>However, in some operator specification, UE won't stop T3402 and won't try the attach/TAU procedure when change PLMN/TAI during T3402 running is required. Hence, this feature option is introduced to control this optmization.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,The setting of this SBP could be set to "Disabled optimization" by defining compile option __SBP_DISABLE_T3402_OPTIMIZATION__ in the makefile,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5792,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_DISABLE_TIMER_T3417EXT_MT,modem_sbp_config[101].SBP_DISABLE_TIMER_T3417EXT_MT,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, EMM will use normal T3417EXT for both MO and MT case. Note that another factor that can affect the timer length is the common function in EMM_CALL, isNeedShortT3417EXT(). Per our implementation isNeedShortT3417EXT takes higher priority than this SBP, that is, T3417EXT for both MO and MT would be set as the designated length if the statement is true.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_DISABLE_TIMER_T3417EXT_MT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5793,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_DISABLE_TM9,modem_sbp_config[83].SBP_DISABLE_TM9,OTA and OTA BY OP,no,no,no,yes,"Disable tm9 related fgi bit - #103, 104, 105, 106, 107, 108, 109, 110<BR>This SBP is used to disable TM9 related feature group indicator (fgi) bits.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enabled ==> turn off tm9,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5794,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_DISABLE_UL64QAM_WHEN_CA_DISABLED,modem_sbp_config[70].SBP_DISABLE_UL64QAM_WHEN_CA_DISABLED,OTA and OTA BY OP,no,no,no,yes,"This feature is used to control if UL64QAM is enabled when CA is disabled.<BR>- When CA is disabled, modem will check if the serving plmn in real network exists in UL-64QAM white-list. If so, UL-64QAM will be enabled, otherwise UL-64QAM will be disabled.<BR>- UL-64QAM white-list: CUSTOM_UL64QAM_PLMN_LIST[] in custom_eas_config.c",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5795,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_DISCARD_MTSMS_WITH_SIM_DATA_DOWNLOAD_AND_DCS_NOT_0XF6,modem_sbp_config[25].SBP_DISCARD_MTSMS_WITH_SIM_DATA_DOWNLOAD_AND_DCS_NOT_0XF6,OTA and OTA BY OP,no,no,no,yes,"When UE receives MT SMS, it will discard the MT SMS with PID= 0x7f (SIM data download) and DCS!=0xf6 (8-bit data, class 2 message) when this feature is enabled.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,The setting of this SBP could be set to "enable" by defining compile option __DISCARD_MTSMS_WITH_SIM_DATA_DOWNLOAD_AND_DCS_NOT_0XF6__ in the makefile,,,,,,Pass,,,,
+5796,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_DISCARD_NAS_MSG_LIST_INT_FAIL,modem_sbp_config[36].SBP_DISCARD_NAS_MSG_LIST_INT_FAIL,OTA and OTA BY OP,no,no,no,yes,"Network may send multiple NAS messages in parallel, UE shall process them all rather than only process partial messages. So if the NAS message's integrity is check failed, then discard the NAS message list to avoid the status of UE and network maybe unsync.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will set attach attempt counter to MAX and start T3402 when UE receives an ATTACH reject with cause #19.<BR>0:Disable. Follow original behavior that UE has 5 times chances to receive ATTACH reject with cause #19.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5797,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_DISPLAY_ALL_EHPLMN_REGARDLESS_OF_SIM_CONFIG,modem_sbp_config[94].SBP_DISPLAY_ALL_EHPLMN_REGARDLESS_OF_SIM_CONFIG,OTA and OTA BY OP,no,no,no,yes,"Manual PLMN list result of EHPLMN display will influence by EF_EHPLMNPI in SIM.<BR>According to TS31.102, EF_EHPLMNPI value can be 0 (no preference), 1 (display highest priority EHPLMN), or 2 (display all EHPLMNs). If this SBP is off, UE regards the display preference as EF_EHPLMNPI. If this data field is not present on the SIM, use "desply highest priority EHPLMN." If this SBP is on, UE regards the display preference as "display all EHPLMNs" regardless of SIM configuration. If inserting test SIM, this SBP would be regarded as off and does not affect display preference.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This SBP can be controlled by compile option __DISPLAY_ALL_EHPLMN_REGARDLESS_OF_SIM_CONFIG__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+5798,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_DISPLAY_ALL_EHPLMN_WHEN_NO_PREFERENCE,modem_sbp_config[74].SBP_DISPLAY_ALL_EHPLMN_WHEN_NO_PREFERENCE,OTA and OTA BY OP,no,no,no,yes,"Manual PLMN list result of EHPLMN display will influence by EF_EHPLMNPI in SIM. According to TS31.102, EF_EHPLMNPI value can be 0 (no preference), 1 (display highest priority EHPLMN), or 2 (display all EHPLMNs).This SBP only works when EF_EHPLMNPI is valid and the value is set t 0 (no preference). If this SBP is off, UE regards the display preference as "display highest priority EHPLMN." If this SBP is on, UE regards the display preference as "display all EHPLMNs."",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This SBP can be controlled by compile option __DISPLAY_ALL_EHPLMN_WHEN_NO_PREFERENCE__,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5799,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_DISPLAY_LOSS_WHEN_CONNECTED_MODE_OOS,modem_sbp_config[80].SBP_DISPLAY_LOSS_WHEN_CONNECTED_MODE_OOS,OTA and OTA BY OP,no,no,no,yes,"For connected mode OOS, UE may keep displaying in-service for minutes according to network configuration. By enabling this SBP, UI can display out-of-service earlier when UE enters connected mode OOS.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__DISPLAY_LOSS_WHEN_CONNECTED_MODE_OOS__,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5800,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_DOCOMO_IOT_CC,modem_sbp_config[4].SBP_DOCOMO_IOT_CC,OTA and OTA BY OP,no,no,no,yes,"For DOCOMO IOT, if this feature is enabled then the FACILITY component in CONNECT peer message will be handled after the CONNECT ACK is sent to the network and if this feature is disabled the CONNECT ACK is sent to network before the FACILITY component in CONNECT message is decoded.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,The configuration of this SBP could be enabled by defining the compile option __DOCOMO_IOT_CC__,,,,,,Pass,,,,
+5801,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_DOCOMO_IOT_SMS,modem_sbp_config[4].SBP_DOCOMO_IOT_SMS,OTA and OTA BY OP,no,no,no,yes,DOCOMO IOT can use test SIM. For test SIM we don't retry. This SBP when enabled we can have the normal retry mechanism.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This feature is controlled by compile time option __DOCOMO_IOT_SMS__.,,,,,,Pass,,,,
+5802,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_DONT_DELETE_FORBIDDEN_LA_LIST_IN_RFOFF_CAUSE_SIM_SWITCH,modem_sbp_config[99].SBP_DONT_DELETE_FORBIDDEN_LA_LIST_IN_RFOFF_CAUSE_SIM_SWITCH,OTA,no,no,no,yes,When SBP_DONT_DELETE_FORBIDDEN_LA_LIST_IN_RFOFF_CAUSE_SIM_SWITCH is enabled and RFOFF request has been received with rfoff cause <BR>as "SIM switch" then the forbidden LA list shall not be deleted.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:if disable, LA list shall be deleted when rfodd reques comes.<BR>0x1:if enable ,when Rf off request comes with cause SIM SWITCH then forbidden LA list shall not be deleted.",,,This SBP can be controlled by compile option __DONT_DELETE_FORBIDDEN_LA_LIST_IN_RFOFF_CAUSE_SIM_SWITCH__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G<BR>-> Trigger RF OFF with cause RFOFF_CAUSE_SIM_SWITCH <BR>[Expected Result]<BR>Observe UE should not delete the forbidden la list in RFOFF,Pass,,,,
+5803,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_DO_NOT_CLEAR_CS_FPLMN_FOR_RAT_MODE_CHANGE,modem_sbp_config[28].SBP_DO_NOT_CLEAR_CS_FPLMN_FOR_RAT_MODE_CHANGE,OTA and OTA BY OP,no,no,no,yes,Operator DOCOMO doest not expect UE to keep CS forbidden PLMN list after rat mode change.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __DO_NOT_CLEAR_CS_FPLMN_FOR_RAT_MODE_CHANGE_.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5804,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_DO_NOT_LIST_LTE_WHEN_NOT_POSSIBLE,modem_sbp_config[41].SBP_DO_NOT_LIST_LTE_WHEN_NOT_POSSIBLE,OTA and OTA BY OP,no,no,no,yes,"If SIM is not USIM, it is impossible register to LTE successfully. Therefore, some customer may think it is useless to perform manual list operation on LTE when non-USIM. <BR>When this SBP is enabled, UE would not perform manual list operation on LTE if inserted SIM is not USIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5805,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_DO_NOT_SEARCH_23G_LTE_ONLY_NETWORK,modem_sbp_config[63].SBP_DO_NOT_SEARCH_23G_LTE_ONLY_NETWORK,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turned on, do not trigger search 2/3G normal service for RJIO SIM (RJIO is a LTE only operator) when RAT mode does not contain LTE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __DO_NOT_SEARCH_23G_LTE_ONLY_NETWORK__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5806,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_DO_NOT_START_TD_DISABLE_TIMER,modem_sbp_config[25].SBP_DO_NOT_START_TD_DISABLE_TIMER,Not Support,no,no,no,yes,"In lab test, operator Docomo does not expect a TS23.122 TD disable timer running after UE disables EUTRAN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is controlled by __DO_NOT_START_TD_DISABLE_TIMER__.,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5807,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_DR_DSDS,modem_sbp_config[96].SBP_DR_DSDS,OTA,no,no,no,no,This feature is to enable parallel DL channel reception capability for both SIM under supported band/RAT combination. <BR>Most useful scenario is one SIM in connected and the other SIM can moniter paging w/o gap.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,N+L DR-DSDS,Multiple SIM,,,"Test in machine : N<BR>Test Time (minutes) : 10<BR>[Init] Dual SIM register to SA and LTE NW seperately.<BR>[Test Step] one SIM in connected mode, check gemini gap status when another SIM in idle mode perform PCH monitoring<BR>[Expected Result]<BR>No gemini gap when idle SIM monitor PCH under supported RAT/band combination",Untested,,,,
+5808,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_DSDA,modem_sbp_config[96].SBP_DSDA,OTA,no,no,no,no,This feature is to enable the capability to establish dual connection in parallel under supported band/RAT combination.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,SA+L DSDA,Multiple SIM,,,Test in machine : N<BR>Test Time (minutes) : 10<BR>[Init] Dual SIM register to SA and LTE seperately.<BR>[Test Step] One SIM SA ping and another SIM make VoLTE call.<BR>[Expected Result]<BR>SA ping and LTE VoNR call can be performed in parallel under supported band combination,Untested,,,,
+5809,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_DUAL_PRIORITY_FEATURE_ENABLED,modem_sbp_config[88].SBP_DUAL_PRIORITY_FEATURE_ENABLED,OTA and OTA BY OP,no,no,no,yes,"This SBP feature decides whether enable dual priority feature. If it is enabled, then UE will enable dual priority feature according to EFs in SIM. If it is disabled, it will disable dual<BR>priority feature regardless of EFs in SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled.<BR>1:Enabled.,,,This feature is controlled by __SBP_DUAL_PRIORITY_FEATURE_ENABLED__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5810,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_DUPLEX_MODE_CHG_AFTER_CSFB,modem_sbp_config[56].SBP_DUPLEX_MODE_CHG_AFTER_CSFB,OTA and OTA BY OP,no,no,no,yes,This feature is valid only when UE is running under LG+WG mode. In some CMCC networks the CSFB call will be redirected to TDS instead of GSM,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:This feature is valid only when UE is running under LG+WG mode. In some CMCC networks the CSFB call will be redirected to TDS instead of GSM,,,"To enable this feature, Compilation flag __ENABLE_DUPLEX_MODE_CHG_AFTER_CSFB__ must be defined",L+W (1.0),Multiple SIM,,,NA,Pass,,,,
+5811,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_DUPLEX_MODE_SWITCH_IN_LIMITED_SERVICE,modem_sbp_config[22].SBP_DUPLEX_MODE_SWITCH_IN_LIMITED_SERVICE,OTA and OTA BY OP,no,no,no,yes,"By default, GMSS will only switch duplex between FDD (LWG) and TDD (LTG) mode while in no service environment. But in some rare scenarios, duplex mode switch in limited service might be necessary. For example, on border of SZ and HK, the UE camps on acceptable cell in HK for limited service and stays in LWG mode. In this case, the UE cannot try registration on suitable CMCC TD-SCDMA cell. (No available LTE/GSM cells belongs to China NW in the environment). The SBP feature is used to make the UE switch between FDD and TDD mode even in limited service.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5812,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_DYNAMICALLY_EXTEND_PAGING_PROTECT_TIMER,modem_sbp_config[91].SBP_DYNAMICALLY_EXTEND_PAGING_PROTECT_TIMER,OTA and OTA BY OP,no,no,no,yes,"[Gemini Specific]<BR>Sometimes, when network send ps paging, UE didn't have enough time to receive downlink<BR>data. It will cause network sends paging again. Therefore, enable this SBP could dynamically extend paging protect timer to let UE have more time to receive DL data from ps paging .",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,This SBP can be controlled by compile option __DISABLE_SBP_DYNAMICALLY_EXTEND_PAGING_PROTECT_TIMER__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5813,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_DYNAMIC_APPLMN_LIST,modem_sbp_config[16].SBP_DYNAMIC_APPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"For Amazon requirement, to append predefined PLMN in NVRAM for PLMN search list. UE will search thoses PLMNs after the OPLMN(Operator Contolled PLMN). In addtion, the dynamic APPLMN will be updated when UE registers on the visited PLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __MM_ENABLE_DYNAMIC_APPLMN_LIST__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5814,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_DYNAMIC_SBP,modem_sbp_config[21].SBP_DYNAMIC_SBP,Not Support,no,no,no,yes,"This SBP is used to control the feature option of Dynamical SBP.<BR>By default, modem will configure needed SBP or NVRAM settings according to the SBP ID from CCCI during boot-up. If we enable this feature, modem could change needed SBP or NVRAM settings according to operator which the inserted SIM card is belong to.<BR>Note, we judge what operator of inserted SIM card is according to the MCC, MNC, and ICCID",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,NA,,,N/A,,,,,NA,Untested,,,,
+5815,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_DYNAMIC_UE_SPECIFIC_DRX,modem_sbp_config[27].SBP_DYNAMIC_UE_SPECIFIC_DRX,OTA and OTA BY OP,no,no,no,yes,"Currently, MTK does not allow user to change DRX parameter. Only one exception is Verizon because Verizon requests to dynamically change DRX paramter for some application.<BR>If this SBP is enabled, UE is allowed to change DRX paramter dynamically. Once user changes the DRX paramter, EMM will perform TAU to notify network the new DRX paramter. If this SBP is disabled, UE is not allowed to change DRX parameter.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE's DRX parameter can change dynamically.<BR>0:Disable. UE's DRX parameter cannot change.,,,User could use compile option __SBP_DYNAMIC_UE_SPECIFIC_DRX__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5816,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_EARLY_REPORT_PS_REG_STATUS,modem_sbp_config[36].SBP_EARLY_REPORT_PS_REG_STATUS,OTA and OTA BY OP,no,no,no,yes,"This SBP was used for RAT icon improvement during CSFB call onging. If this SBP was disabled, UI display PS state on UI when CSFB call started and fallback on CS network. Once enable this SBP, UE will display PS state immediately on UI when CSFB call confirm from network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __EARLY_REPORT_PS_REG_STATUS__,,,,,,Pass,,,,
+5817,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_EARLY_RLF_IF_NW_RELEASE,modem_sbp_config[92].SBP_EARLY_RLF_IF_NW_RELEASE,OTA and OTA BY OP,no,no,no,yes,"This SBP feature option is used to enable early RLF if NW release connection.<BR><BR>Early RLF means reducing the t313 value to customized value. This will be triggered when NW release connection from its side when UE is in DCH state since if NW release connection, RLF is inevitable and there is no point in waiting for UE to be in out-of-sync state .",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,WCDMA Protocol (R8 Baseline),3G,,,Make SIR < -96dBm in connected state when<BR>1. Ecno>-10dBm<BR>2. Gemini suspension% < 30%<BR>3. PLMN is present in custom list<BR>Then RLF will happen with customized t313 value.<BR>This early RLF feature will hit only for customized PLMNs. This feature is customer requirement and customer verified it.,Untested,,,,
+5818,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_EAS_REDUCE_VIDLE_TAU,modem_sbp_config[81].SBP_EAS_REDUCE_VIDLE_TAU,OTA and OTA BY OP,no,no,no,yes,"When another SIM is transferring data, TAU of current SIM will interrupt another SIM. When this SBP is ON, if signal quality of current SIM is good, will reduce unnecessary reselection to prevent from TAU.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5819,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_ECBM_ENABLE,modem_sbp_config[28].SBP_ECBM_ENABLE,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+5820,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_ECC_FORCE_IMS_CELL,modem_sbp_config[79].SBP_ECC_FORCE_IMS_CELL,Not Support,no,no,no,yes,The SBP controls whether to perform Two stage Any search. Search ECC available first. Then search IMS not support cell if ECC-available not found.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __DISABLE_ECC_FORCE_IMS_CELL__ is defined, the SBP is disabled",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+5821,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_ECC_NOT_PREEMPT_SEARCH,modem_sbp_config[15].SBP_ECC_NOT_PREEMPT_SEARCH,Not Support,no,no,no,yes,"In order to register on network before dial ECC(which might trigger limited service search), turn on this SBP to not interrupt normal service search.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is controlled by __ECC_NOT_PREEMPT_SEARCH__.,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5822,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_ECSFB,modem_sbp_config[65].SBP_ECSFB,OTA and OTA BY OP,no,no,no,yes,"As per Standard, While searching for GSM cell during 4G to 2G MO/MT CSFB, RRM need to use the redirection list provided by the netwrok. It results in sometimes GSM select cell of different LA then TA of LTE cell, causing addition Location update procedure in GSM. This delay due to Location update in GSM causes MO/MT call failure.<BR>This feature allows RR to give more preferance to GSM cell with same LA as TA of LTE cell during cell search.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will give preference to GSM cell of same LA as TA of LTE cell.<BR>0:GSM will follow 3GPP and RR will use redirection list as provided by network during cell search.,,,Feature could be enabled by enabling compiler option __ECSFB__.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5823,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_ECSFB_ENHANCED_ASSOCIATION_OF_24G_CELLS,modem_sbp_config[89].SBP_ECSFB_ENHANCED_ASSOCIATION_OF_24G_CELLS,OTA and OTA BY OP,no,no,no,yes,"This feature provide optimization for eCSFB. after 2G4 IRCR/IRCCO/Redirection successful, add 2G serving cell and 4G target cell to eCSFB association list.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,Feature require compile option __ECSFB_ENHANCED_ASSOCIATION_OF_24G_CELLS__ to be defined and SBP will be enabled.,,,,,,Untested,,,,
+5824,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_EDALLOW_RE_ATTACH,modem_sbp_config[91].SBP_EDALLOW_RE_ATTACH,OTA and OTA BY OP,no,no,no,yes,"This feature is to prevent new data service protocol from the interruption of orignal data protocol's LTE PS paging. With this feature enabled, when AP sends AT+EDALLOW to switch data service to another protocol, modem will perform detach/attach flow in the origianl LTE protocol. It avoids garbage PS paging from original protocol to interrupt the data servcice in the new protocol. The issue mainly happens in RAT combitions of L+W, L+G and L+C2K.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,The setting of this SBP could be set to "enable" by defining compile option __EDALLOW_RE_ATTACH__ in the makefile,MD Config,Modem - Customer Requirement,,,"Test in machine (N) N<BR> Test Time (20 minutes) <BR> [Init] poweron PS register with dual SIM in L+W mode<BR> [Test Step] switch data SIM from SIM1 to SIM2, and use SIM2 do surf the net<BR> [Expected Result]<BR>the throughput in SIM2 is normal",Pass,,,,
+5825,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_EL1C_ALL_MEAS_OPT,modem_sbp_config[32].SBP_EL1C_ALL_MEAS_OPT,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
5826,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_ELEVATOR_MODE,modem_sbp_config[98].SBP_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTurn on elevator mode for optimization of camping on LTE cell when out of elevatorbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:elevator mode enabled<BR>0:elevator mode disabled,,,,MD Config,Modem - Customer Requirement,,,"firstly input AT CMD:<BR>AT+EGMC=1,"elevator_mode",0<BR>AT+EGMC=1,"elevator_mode",1<BR><BR>then input the following command:<BR>1. AT+ERAT=0<BR>2. AT+EGMC=1,"elevator_mode",0<BR>3. AT+EGMC=1,"elevator_mode",1<BR>4. AT+ERAT=6",Pass,,,,
-5827,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_EMAC_AUDRX,modem_sbp_config[30].SBP_EMAC_AUDRX,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEMAC AUDRX obsolete disabled after UMOLYAbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-5828,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_EMAC_VOLTE_LOW_POWER_ENH,modem_sbp_config[66].SBP_EMAC_VOLTE_LOW_POWER_ENH,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEMAC volte low power enhancement. Bit value 0: Disabled. Bit value 1: Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:diable,,,,,,,,covered by SBP framework IT,Pass,,,,
-5829,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_EMC_PDN_ACT_DISABLE_T3482,modem_sbp_config[71].SBP_EMC_PDN_ACT_DISABLE_T3482,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuredisable T3482 retry mechanism when activating emergency PDN connectionbit 0:0:Disable SBP. T3482 retry mechanism will not be disable when activating EMC PDN connectionbit 1:1:Enabled SBP. T3482 retry mechanism will be disable when activating EMC PDN connection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init]<BR>Disable SBP.<BR>UE attached to LTE<BR>[Test Step] <BR>UE make activation of additional Emergency PDN connection and NW does not respond to request.<BR>[Expected Result]<BR> T3482 retry mechanism will not be disable when activating EMC PDN connection,Pass,,,,
-5830,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMC_RETRY_CHK_IMS_EMERGENCY_SUPPORT,modem_sbp_config[89].SBP_EMC_RETRY_CHK_IMS_EMERGENCY_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCheck ImsEmergencySupport when retry LTE emergency bearer servicebit 0:0:Don't checkbit 1:1:Check",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Check.<BR>0:Don't check.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5831,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_EMM_ACCEPT_NITZ_IN_DEREGISTERED_STATE,modem_sbp_config[95].SBP_EMM_ACCEPT_NITZ_IN_DEREGISTERED_STATE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurenot accept the EMM information during deregistered statebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will accept the EMM information during deregistered state.<BR>0:Disable. UE will not accept the EMM information during deregistered state.,,,__EMM_ACCEPT_NITZ_IN_DEREGISTERED_STATE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5832,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_EMM_ASSUME_NW_SUPPORT_EPC_LCS,modem_sbp_config[64].SBP_EMM_ASSUME_NW_SUPPORT_EPC_LCS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAssume network supports EPC LCSbit 0:0:Disabled, UE cannot send LPP data if the machine/network does not set up the EPC LCS bit in the attach accept bit 1:1:Enabled, UE can send LPP data if the machine/network supports EPS LPP data but does not set up the EPC LCS bit in the attach accept",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE can send LPP data if the machine/network supports EPS LPP data but does not set up the EPC LCS bit in the attach accept.<BR>0:Disable. UE cannot send LPP data if the machine/network does not set up the EPC LCS bit in the attach accept.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5833,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_EMM_CONN_FAIL_ABNORMAL_B,modem_sbp_config[19].SBP_EMM_CONN_FAIL_ABNORMAL_B,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureHandling as abnormal case b if CONN_FAIL during establishing connectionbit 0:0:Disable. Retry immediately if CONN_FAIL during establishing connectionbit 1:1:Enabled. Handling as abnormal case b if CONN_FAIL during establishing connection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Handling as abnormal case b if CONN_FAIL during establishing connection.<BR>0:Disable. Retry immediately if CONN_FAIL during establishing connection.,,,__SBP_EMM_CONN_FAIL_ABNORMAL_B__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5834,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_EMM_CONN_FAIL_SELECT_23G_FOR_CSFB,modem_sbp_config[82].SBP_EMM_CONN_FAIL_SELECT_23G_FOR_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureForce select 23G when EXSR(for CSFB) fail due to T300 expirybit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__DISABLE_EMM_CONN_FAIL_SELECT_23G_FOR_CSFB__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5835,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_EMM_CUST_BAR_BAD_CELL,modem_sbp_config[101].SBP_EMM_CUST_BAR_BAD_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurenot bar bad cell in the EMM custom functionsbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled bar the bad cell feature.<BR>0:disabled bar the bad cell feature.,,,__RTT_BAR_BAD_CELL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5836,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_EMM_CUST_MAP_EMM_CAUSE,modem_sbp_config[56].SBP_EMM_CUST_MAP_EMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReject cause mapping by userbit 0:0:Disable. Follow spec reject cause handlingbit 1:1:Enabled. User can map network reject cause to other reject cause that user want.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. User can map network reject cause to other reject cause that user want.<BR>0:Disable. Follow spec reject cause handling.,,,__SBP_NVRAM_MAP_EMM_CAUSE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5837,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_EMM_DELAY_SEND_IMS_PDN_REQUEST,modem_sbp_config[99].SBP_EMM_DELAY_SEND_IMS_PDN_REQUEST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDelay send ESM message with current RRC connection bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5838,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_EMM_DUPLEX_CHG_NO_CELL_LOCAL_DET,modem_sbp_config[90].SBP_EMM_DUPLEX_CHG_NO_CELL_LOCAL_DET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePerform local detach when no cell during duplex mode changebit 0:0:Attempt air detachbit 1:1:Local detach",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Local detach<BR>0:Attempt air detach,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5839,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_EMM_EIA0_NOT_SUPPORTED_WHEN_NORMAL_ATTACH,modem_sbp_config[96].SBP_EMM_EIA0_NOT_SUPPORTED_WHEN_NORMAL_ATTACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot disable the EIA0 capability when normal attachbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:normal attach does not support EIA0.<BR>0:normal attach supports EIA0.,,,__SBP_EMM_EIA0_NOT_SUPPORTED_WHEN_NORMAL_ATTACH__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5840,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_EMM_EMC_EST_CONNECTION,modem_sbp_config[75].SBP_EMM_EMC_EST_CONNECTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureForce EMM to setup RRC connection with cause emergencybit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Force EMM setup RRC connection with cause emergency<BR>0:Not force EMM setup RRC connection with cause emergency,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5841,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_EMM_IGNORE_ALL_PS_PAGING_DURING_MMS_SESSION,modem_sbp_config[74].SBP_EMM_IGNORE_ALL_PS_PAGING_DURING_MMS_SESSION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNon-data sim will ignore all PS paging when data sim performs MMSbit 0:0:Disabled. Non-data sim does not ignore PS paging when data sim performs MMSbit 1:1:Enabled. Non-data sim will ignore all PS paging when data sim performs MMS",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Non-data sim will ignore all PS paging when data sim performs MMS.<BR>0:Disabled. Non-data sim does not ignore PS paging when data sim performs MMS.,,,__ENABLE_LTE_EMM_IGNORE_ALL_PS_PAGING_DURING_MMS_SESSION__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5842,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_EMM_IGNORE_MT_CS_WHEN_IMS_CALL,modem_sbp_config[18].SBP_EMM_IGNORE_MT_CS_WHEN_IMS_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore CS Service Notification during VoLTE callbit 0:0:Disabled. UE will not ignore CS service notification when VoLTE call is on going and does CSFBbit 1:1:Enabled. UE will ignore CS service notification when VoLTE call is on going",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will ignore CS service notification when VoLTE call is on going<BR>0:Disabled. UE will not ignore CS service notification when VoLTE call is on going and does CSFB,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5843,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable ignore ps paging after data switchbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,phase out,Untested,,,,
-5844,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH_IMS_UNREGISTERED,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH_IMS_UNREGISTERED,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable ignore ps paging after data switch when ims unregbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,no,,,,,phase out,Untested,,,,
-5845,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_EMM_IGNORE_PS_PAGING_DURING_MMS_SESSION_WHEN_IMS_DEREG,modem_sbp_config[74].SBP_EMM_IGNORE_PS_PAGING_DURING_MMS_SESSION_WHEN_IMS_DEREG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIf non-data SIM is VoLTE off, then it will ignore PS paging when data sim performs MMSbit 0:0:Disabled. Non-data sim does not ignore PS paging when data sim performs MMSbit 1:1:Enabled. If non-data SIM is VoLTE off, then it will ignore PS paging when data sim performs MMS",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Disabled. Non-data sim does not ignore PS paging when data sim performs MMS.<BR>1:Enabled. If non-data SIM is VoLTE off, then it will ignore PS paging when data sim performs MMS.",,,__DISABLE_LTE_EMM_IGNORE_PS_PAGING_DURING_MMS_SESSION_WHEN_IMS_DEREG__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5846,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_EMM_IGNORE_TAC_ALL_ZEROS_CHECK,modem_sbp_config[30].SBP_EMM_IGNORE_TAC_ALL_ZEROS_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore TAC check for all zeros valuebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE does not treat 0x0000 as deleted TAC so that it could send SERVICE REQUEST if the TAC of current cell is 0x0000.<BR>0:UE treats 0x0000 as deleted TAC which follow the definition of the spec 24.301.,,,__EMM_IGNORE_TAC_ALL_ZEROS_CHECK__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5847,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_EMM_LOCAL_DETACH_WHEN_T3421_TIMEOUT_FOR_SIM_DETACH_IN_DEREG_STATE,modem_sbp_config[73].SBP_EMM_LOCAL_DETACH_WHEN_T3421_TIMEOUT_FOR_SIM_DETACH_IN_DEREG_STATE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurelocal detach when T3421 timeout for SIM detach in DEREG statebit 0:0:Disable. does not local detach when T3421 timeout for SIM detach in DEREG state.bit 1:1:Enabled. local detach when T3421 timeout for SIM detach in DEREG state.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. local detach when T3421 timeout for SIM detach in DEREG state.<BR>0:Disable. does not local detach when T3421 timeout for SIM detach in DEREG state.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5848,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_EMM_NON_TEST_SIM_BEHAVIOR,modem_sbp_config[78].SBP_EMM_NON_TEST_SIM_BEHAVIOR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEMM always perform NON TEST SIM behavior.bit 0:0:Disable. Treat TEST SIM as TEST SIM.bit 1:1:Enable. Treat TEST SIM as NON TEST SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable. Treat TEST SIM as TEST SIM.<BR>1:Enable. Treat TEST SIM as NON TEST SIM.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5849,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG,modem_sbp_config[72].SBP_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureoccupy cs semaphore when TAU request without active flag but network establishes DRBbit 0:0:Disable, EMM does not occupy cs semaphore when TAU request without active flag but network establishes DRBbit 1:1:Enable, EMM will occupy cs semaphore when TAU request without active flag but network establishes DRB",BIT,1,,1,__SBP_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG__ : 1<BR>MT6885 : 1<BR>MT6873 : 0<BR>DEFAULT_VALUE : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, EMM will occupy cs semaphore when TAU request without active flag but network establishes DRB.<BR>0:Disable, EMM does not occupy cs semaphore when TAU request without active flag but network establishes DRB.",,,__SBP_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG__ <BR>__DISABLE_LTE_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5850,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_EMM_PERFORM_PAGING_AND_SYNC_TAU_TOGETHER,modem_sbp_config[104].SBP_EMM_PERFORM_PAGING_AND_SYNC_TAU_TOGETHER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuretrigger TAU after local release seamlesslybit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,__DISABLE_EMM_PERFORM_PAGING_AND_SYNC_TAU_TOGETHER__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5851,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_EMM_PERFORM_PLMN_SEARCH_AFTER_DETACH_NOT_REQ_ABNORMAL,modem_sbp_config[58].SBP_EMM_PERFORM_PLMN_SEARCH_AFTER_DETACH_NOT_REQ_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePerform PLMN search when receiving reattach not required in detach procedure.bit 0:0:Turn-off. Enter EMM-DEREGISTERED statebit 1:1:Turn-on. Enter EMM-DEREGISTERED.PLMN-SEARCH state",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5852,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_EMM_PROC_AS_FAIL_BAR_CELL,modem_sbp_config[66].SBP_EMM_PROC_AS_FAIL_BAR_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBar the camped cell that AS failure during EMM procedurebit 0:0:Disable. Follow spec handling.bit 1:1:Enabled. Bar the camped cell that AS failure during EMM procedure",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__LTE_EMM_PROC_AS_FAIL_BAR_CELL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5853,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_EMM_PROC_FAIL_HANDLING,modem_sbp_config[70].SBP_EMM_PROC_FAIL_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBar the fake cell when UE detect the cell is a fake one.bit 0:0:Disable. No special handling for fake cell.bit 1:1:Enabled. Bar the fake cell when UE detect the cell is a fake one.",BIT,1,,1,__DISABLE_LTE_DETACH_EMM_PROC_FAIL_HANDLING__ : 0 <BR>DEFAULT_VALUE : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Bar the fake cell when UE detect the cell is a fake one.<BR>0:Disable. No special handling for fake cell.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5854,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_EMM_PROC_FAIL_HANDLING_BY_OP,modem_sbp_config[88].SBP_EMM_PROC_FAIL_HANDLING_BY_OP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThe handling for EMM procedure fail is by operatorbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:The handling for EMM procedure fail is by operator<BR>0:The handling for EMM procedure fail is not by operator,,,__SBP_EMM_PROC_FAIL_HANDLING_BY_OP__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5855,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_EMM_PROC_NW_REL_BAR_CELL,modem_sbp_config[66].SBP_EMM_PROC_NW_REL_BAR_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBar the camped cell that NW release connection during EMM procedurebit 0:0:Disable. Follow spec handlingbit 1:1:Enabled. Bar the camped cell that NW release connection during EMM procedure",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__LTE_EMM_PROC_NW_REL_BAR_CELL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5856,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_EMM_R14_INDICATE_SWITCH_OFF_FOR_USIM_REMOVAL,modem_sbp_config[78].SBP_EMM_R14_INDICATE_SWITCH_OFF_FOR_USIM_REMOVAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIndicate switch off bit in DETACH REQ for USIM REMOVALbit 0:0:Disable. Does not indicate switch off bit in DETACH REQ for USIM REMOVAL.bit 1:1:Enabled. Indicate switch off bit in DETACH REQ for USIM REMOVAL.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Indicate switch off bit in DETACH REQ for USIM REMOVAL.<BR>0:Disable. Does not indicate switch off bit in DETACH REQ for USIM REMOVAL.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5857,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_EMM_REJ_CAUSE_2_ADD_TO_FTAI,modem_sbp_config[54].SBP_EMM_REJ_CAUSE_2_ADD_TO_FTAI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurestore the current TAI to FTAI list when UE receives ATTACH/TAU accept but EPS only with cause #2bit 0:0:Disable. Follow spec ATTACH/TAU accept but EPS only with cause #2 handlingbit 1:1:Enabled. store the current TAI to FTAI list when UE receives ATTACH/TAU accept but EPS only with cause #2",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. store the current TAI to FTAI list when UE receives ATTACH/TAU accept but EPS only with cause #2.<BR>0:Disable. Follow spec ATTACH/TAU accept but EPS only with cause #2 handling.,,,__EMM_REJ_CAUSE_2_ADD_TO_FTAI__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5858,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_DIFF_PLMN,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_DIFF_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRetry LTE emergency bearer service in different PLMNbit 0:0:EMM always reject LTE emergency bearer service in different PLMNbit 1:1:EMM could retry LTE emergency bearer service in different PLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service in different PLMN.<BR>0:Disabled. EMM always reject LTE emergency bearer service in different PLMN.,,,__EMM_RETRY_EMC_IN_DIFF_PLMN__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5859,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SAME_PLMN,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SAME_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRetry LTE emergency bearer service in same PLMNbit 0:0:EMM always reject LTE emergency bearer service in same PLMNbit 1:1:EMM could retry LTE emergency bearer service in same PLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service in same PLMN.<BR>0:Disabled. EMM always reject LTE emergency bearer service in same PLMN.,,,__EMM_RETRY_EMC_IN_SAME_PLMN__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5860,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SHARED_NW,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SHARED_NW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRetry LTE emergency bearer service in shared networkbit 0:0:EMM always reject LTE emergency bearer service in shared networkbit 1:1:EMM could retry LTE emergency bearer service in shared network",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service in shared network.<BR>0:Disabled. EMM always reject LTE emergency bearer service in shared network.,,,__EMM_RETRY_EMC_IN_SHARED_NW__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5861,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_WHEN_ABNORMAL,modem_sbp_config[12].SBP_EMM_RETRY_EMC_WHEN_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRetry LTE emergency bearer service when reject or abnormal cases occuredbit 0:0:EMM always reject LTE emergency bearer service when reject or abnormal cases occuredbit 1:1:EMM could retry LTE emergency bearer service when reject or abnormal cases occured",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service when reject or abnormal cases occured.<BR>0:Disable. EMM always reject LTE emergency bearer service when reject or abnormal cases occured.,,,__EMM_RETRY_EMC_WHEN_ABNORMAL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5862,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMM_SEARCH_NORMAL_FOR_ECC_CALL,modem_sbp_config[89].SBP_EMM_SEARCH_NORMAL_FOR_ECC_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureInform normal call type to let NWSEL search normal in the ECC callbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,__SBP_EMM_SEARCH_NORMAL_FOR_ECC_CALL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_EMM_SHORTEN_T3440,modem_sbp_config[71].SBP_EMM_SHORTEN_T3440,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureShorten the T3440 length.bit 0:0:Disable. keep using the default value for T3440.bit 1:1:Enabled. Shorten the T3440 length.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Shorten the T3440 length.<BR>0:Disable. keep using the default value for T3440.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5864,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_EMM_SUPPORT_IE_BLACK_LIST,modem_sbp_config[98].SBP_EMM_SUPPORT_IE_BLACK_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresupport IE black list functionalitybit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1: Enabled:support IE black list functionality.<BR>0: Disabled:do not support IE black list functionality.,,,__EMM_DISABLE_IE_BLACK_LIST__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5865,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_EMPTY_1,modem_sbp_config[53].SBP_EMPTY_1,Not Support,yes,yes,no,yes,This configuration is no use.<BR>No need to test it,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,N/A,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-5866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_EMR_REPORTING_WITH_SI2Q_BSIC_PARA,modem_sbp_config[7].SBP_EMR_REPORTING_WITH_SI2Q_BSIC_PARA,OTA and OTA BY OP,no,no,no,yes,By This feature is used to report Enhanced Measurement Report by SI2quater and SI5series if NW doesn't broadcast Measurement Information.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:it means UE doesn't support Enhanced Measurement Reporting by SI2quater and SI5series<BR>1:it means UE supports Enhanced Measurement Reporting by SI2quater and SI5series,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5867,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_ENABLE256QAM_UNDER_TEST_SIM,modem_sbp_config[84].SBP_ENABLE256QAM_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl if DL 256QAM is enabled for Test SIMbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5868,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_ENABLE_1XRTT_ICS_OPTIMIZATION,modem_sbp_config[101].SBP_ENABLE_1XRTT_ICS_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable the 1xRTT ICS optimizationbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,MO/MT call in Live NW,Pass,,,,
-5869,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_ENABLE_CALL_PREFER_IN_UNACK_MODE,modem_sbp_config[82].SBP_ENABLE_CALL_PREFER_IN_UNACK_MODE,OTA and OTA BY OP,no,no,no,yes,"Sometimes in 2G, during data transfer, NW assign the RLC unack mode to UE. So to protect the unack mode data transfer, peer SIM will be suspended so that throughput will not be impacted. But at the same time, peer SIM will not be able to make MO Call/SMS nor it can receive paging for MT Call/SMS. So this SBP allow to prefer peer SIM MO/MT Call/SMS or unack mode data trasnfer. If SBP is enanled then peer SIM will be in Virtual IDLE mode and able to make/receive MO/MT Call/SMS. If SBP disable then peer SIM will be suspended and full RF utilization is for Unack mode data trasnfer SIM.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Don't Protect the 2G Unack mode data tranfer, Prefer Peer SIM Call<BR>0:Protect the 2G Unack mode data tranfer, Prefer Unack data",,,__ENABLE_CALL_PREFER_IN_UNACK_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5870,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_ENABLE_CSFB_ONGOING_STATUS_EARLY,modem_sbp_config[71].SBP_ENABLE_CSFB_ONGOING_STATUS_EARLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable CSFB ongoing status earlybit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_ENABLE_D4U5_FOR_TESTSIM,modem_sbp_config[76].SBP_ENABLE_D4U5_FOR_TESTSIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable D4U5 category combination for test SIMbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__SBP_DISABLE_D4U5_FOR_TESTSIM__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_ENABLE_HNB_NAME_URC,modem_sbp_config[41].SBP_ENABLE_HNB_NAME_URC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo enable URC to display HnB namebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"After UE registering, check whether AP behaves normally",Pass,,,,
-5873,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_ENABLE_IRAT_RSTD,modem_sbp_config[93].SBP_ENABLE_IRAT_RSTD,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureEnable INTER-RAT RSTD feature in 3GPP R15bit 0:0:Disable IRAT-RSTD featurebit 1:1:Enable IRAT-RSTD feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,LTE OTDOA (Observed Time Difference Of Arrival),4G,,,Test in machine Y<BR>Test Time (minutes) 10 <BR>[Init] According to RD IT SOP<BR>[Test Step] Trigger IRAT-RSTD OTDOA procedure<BR>[Expected Result] UE shall report IRAT-RSTD OTDOA report,Pass,,,,
-5874,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_ENABLE_IVSR_23G_ONLY_GPRS_NOT_ALLOW,modem_sbp_config[69].SBP_ENABLE_IVSR_23G_ONLY_GPRS_NOT_ALLOW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable IVSR for 23G GPRS not allowed but 4G EPS OKbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,DEFAULT_VALUE : 0 <BR>__ENABLE_IVSR_23G_ONLY_GPRS_NOT_ALLOW__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5875,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_ENABLE_MODEM_IVSR,modem_sbp_config[57].SBP_ENABLE_MODEM_IVSR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger Modem IVSR when first entering SIM invalid statebit 0:0:Disabled. Do not trigger modem IVSRbit 1:1:Enabled. Trigger modem IVSR if UE registers before",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_ENABLE_PERIODIC_CLEAR_FPLMN_TIMER,modem_sbp_config[74].SBP_ENABLE_PERIODIC_CLEAR_FPLMN_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureClear FPLMN periodicallybit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5877,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_ENABLE_RF_SCAN_FOR_DESENSE_TEST,modem_sbp_config[91].SBP_ENABLE_RF_SCAN_FOR_DESENSE_TEST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable RF scan for desense testbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"After enabling the SBP, check AT+ERFSCAN can be sent",Pass,,,,
-5878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_ENABLE_SEMI_PERSISTENT_SCHEDULING,modem_sbp_config[70].SBP_ENABLE_SEMI_PERSISTENT_SCHEDULING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureForce enable Semi-Persistent Schedulingbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5879,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_ENABLE_SGSGN_REL_CHECK,modem_sbp_config[41].SBP_ENABLE_SGSGN_REL_CHECK,OTA and OTA BY OP,no,no,no,yes,"In some of the in house network, we have noticed that becuase of MTK UE is always sending Revision Level Indicator as "1 - used by a mobile station supporting R99 or later versions of the protocol" in MS Network Capability IE , test case is failing. As test case is expecting Revision Level Indicator should be matched with the network given SGSN Release.<BR>So we need to change the UE behaviour according to network. For this, we have introduced this SBP. If this SBP is enabled, UE should consider SGSN Release of network while sending Revision Level Indicator in MS Network Capability IE. If network supports SGSN release as 98 then UE should send Revision Level Indicator as 98.<BR>Following is the network given SGSN value to UE in System Information 13.<BR>- 0 The SGSN is Release '98 or older <BR>- 1 The SGSN is Release '99 or older <BR>When this SBP is enabled, in some of the network,( which supports SGSN as 98) it is obseved that network is not assigning high multislot class capabilities to UE during PS data transfer in GSM. So better to disable this SBP if such newtork behaviour is observed.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. UE should consider SGSN Release of network while sending Revision Level Indicator in MS Network Capability<BR>0:Disable. UE is not considering SGSN Release of network while sending Revision Level Indicator in MS Network Capability,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5880,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_ENABLE_SML_MAX_RETRY_COUNT,modem_sbp_config[93].SBP_ENABLE_SML_MAX_RETRY_COUNT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSML Max Retry Countbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM ME Lock,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-5881,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_ENAS_TRIGGER_LTE_NW_RELEASE,modem_sbp_config[84].SBP_ENAS_TRIGGER_LTE_NW_RELEASE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport NAS to trigger connection releasebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5882,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_ENAS_TRIGGER_REEST,modem_sbp_config[97].SBP_ENAS_TRIGGER_REEST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNo trigger of further reestablishment when network ignores TRIGGER_RELEASE A2 from NASbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,SBP_ENAS_TRIGGER_LTE_NW_RELEASE,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5883,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_END_CONNECTED_MODE_OOS_AFTER_PLMN_LOSS,modem_sbp_config[62].SBP_END_CONNECTED_MODE_OOS_AFTER_PLMN_LOSS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not consider connected mode OOS after PLMN lossbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5884,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_ENFORCE_PS_DATA_OFF_IF_PDN_GW_NOT_SUPPORT,modem_sbp_config[81].SBP_ENFORCE_PS_DATA_OFF_IF_PDN_GW_NOT_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE applis PS DATA OFF logic even if NW not support 3GPP PS DATA OFFbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If this PDN does not support PS DATA OFF, the UE will run PS DATA OFF logic on this PDN<BR>0:If this PDN does not support PS DATA OFF, the UE will not run PS DATA OFF logic on this PDN. The UE runs the existing MTK data off logic.",,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5885,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_ENHANCED_SOR,modem_sbp_config[19].SBP_ENHANCED_SOR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply enhanced steering of roaming.bit 0:0:Diabled. Disable enhanced steering of roamingbit 1:1:Enabled. Enable enhanced steering of roaming",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5886,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_ENS,modem_sbp_config[3].SBP_ENS,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo support the requirement of AT&T Enhanced Network Selection (ENS).bit 0:0:Turn-off. Not support ENSbit 1:1:Turn-on. Support ENS",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5887,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_ENS_RAT_BALANCING,modem_sbp_config[3].SBP_ENS_RAT_BALANCING,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuredynamically load balances 3G ME to different RAT mode settingsbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"Insert AT&T card, observe whether RAT mode setting can be configure correctly",Pass,,,,
-5888,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_EPLMN_RETRY_RESTRICTION_SUPPORT,modem_sbp_config[39].SBP_EPLMN_RETRY_RESTRICTION_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to add EPLMN list into the scope of Back-off timer in SM/ESMbit 0:0:Not support the handling of the EPLMNC flag in Re-attempt indicatorbit 1:1:Support the handling of the EPLMNC flag in Re-attempt indicator",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-5889,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EPS_ONLY_CAUSE18_SELECT23G,modem_sbp_config[89].SBP_EPS_ONLY_CAUSE18_SELECT23G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot support eps only cause 18 to select 23Gbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_EPS_ONLY_CAUSE18_SELECT23G__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5890,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_EPS_ONLY_WHEN_IMS_REGISTERED,modem_sbp_config[28].SBP_EPS_ONLY_WHEN_IMS_REGISTERED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE mode operation will be PS mode 1 or PS mode 2 when IMS registeredbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5891,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_ERRC_CAPABILITY_OFF_BY_PLMN,modem_sbp_config[103].SBP_ERRC_CAPABILITY_OFF_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureERRC Capability off by PLMNbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__DISABLE_ERRC_CAPABILITY_OFF_BY_PLMN__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5892,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_ERRC_HO_SIB_READ_TIMER,modem_sbp_config[38].SBP_ERRC_HO_SIB_READ_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis SBP is used to enable the customized LTE SIB read timer during handover(HO) procedure.bit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the customized LTE SIB read timer during handover<BR>0:Disable the customized LTE SIB read timer during handover,,,__ERRC_HO_SIB_READ_TIMER__,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
-5893,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_ERRC_HST_ENHANCED_DEMODULATION,modem_sbp_config[59].SBP_ERRC_HST_ENHANCED_DEMODULATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature To enable HST enhanced demodulationbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__EHST_ENABLE__,High Speed Train (HST),MTK Proprietary,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5894,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_ERRC_HST_ENHANCED_MEAS,modem_sbp_config[58].SBP_ERRC_HST_ENHANCED_MEAS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature To enable HST enhacned measbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__EHST_ENABLE__,High Speed Train (HST),MTK Proprietary,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5895,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_ERRC_HST_PRACH_CONFIG_ENHANCED,modem_sbp_config[59].SBP_ERRC_HST_PRACH_CONFIG_ENHANCED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature To enabel HST PRACH config enhancedbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__EHST_ENABLE__,High Speed Train (HST),MTK Proprietary,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5896,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_ERRC_HST_PRACH_ZERO_CORRELATION_ZONE,modem_sbp_config[59].SBP_ERRC_HST_PRACH_ZERO_CORRELATION_ZONE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature To enable HST PRACH zero correlation zonebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1: <BR>enabled,,,,High Speed Train (HST),MTK Proprietary,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5827,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_EMAC_AUDRX,modem_sbp_config[30].SBP_EMAC_AUDRX,Not Support,no,no,no,yes,"Obsolete. Always disabled after UMOLYA.<BR>In 6290 platform, we encountered a customer feedback of high UE power consumption under specific 4G network environment:<BR>there is no DRX configuration from eNB, but eNB keeps UE in ERRC connected state even after data flow is inactive for several minutes.<BR>To spare UE power consumption in this scenario during the last data inactive period, autonomous DRX is introduced to<BR>create UE-self DRX behavior which allows occasional RF off to achieve power saving.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled,,,N/A,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+5828,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_EMAC_VOLTE_LOW_POWER_ENH,modem_sbp_config[66].SBP_EMAC_VOLTE_LOW_POWER_ENH,OTA,no,no,no,yes,This SBP is used to enable/disable low power enhancement in the VoLTE scenario. If this SBP is ON : Enable low power enhancement in the VoLTE scenario. If this SBP is OFF : Disable low power enhancement in the VoLTE scenario,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:diable,,,N/A,,,,,covered by SBP framework IT,Pass,,,,
+5829,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_EMC_PDN_ACT_DISABLE_T3482,modem_sbp_config[71].SBP_EMC_PDN_ACT_DISABLE_T3482,OTA and OTA BY OP,no,no,no,yes,"Operator requests to let IMS stack fully controls the activation of Emergency PDN connection by disabling 3GPP T3482 retry mechanism. To achieve this, it requests UE to disable T3482 directly or set the value of T3482 longer than IMS E1 timer value. By turning on this SBP, T3482 retry mechanism will not affect IMS E1 retry mechanism.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init]<BR>Disable SBP.<BR>UE attached to LTE<BR>[Test Step] <BR>UE make activation of additional Emergency PDN connection and NW does not respond to request.<BR>[Expected Result]<BR> T3482 retry mechanism will not be disable when activating EMC PDN connection,Pass,,,,
+5830,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMC_RETRY_CHK_IMS_EMERGENCY_SUPPORT,modem_sbp_config[89].SBP_EMC_RETRY_CHK_IMS_EMERGENCY_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"This feature is used to enable/disable the checking ImsEmergencySupport when retry LTE emergency bearer service on suitable cell. According to 3GPP spec only the case of acceptable is required to check, but some operator requires to check this regardless of cell type. Hence, this SBP is created to provide such funtionality.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Check.<BR>0:Don't check.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5831,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_EMM_ACCEPT_NITZ_IN_DEREGISTERED_STATE,modem_sbp_config[95].SBP_EMM_ACCEPT_NITZ_IN_DEREGISTERED_STATE,OTA and OTA BY OP,no,no,no,yes,"UE will accept the EMM information during deregistered state, but this SBP is a violation of TS24.301. <BR>As the description in TS24.301, the EMM information procedure may be invoked by the network at any time during an established EMM context.<BR>It means that UE handles the EMM information when registered.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will accept the EMM information during deregistered state.<BR>0:Disable. UE will not accept the EMM information during deregistered state.,,,This feature can be enabled by compile option __EMM_ACCEPT_NITZ_IN_DEREGISTERED_STATE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5832,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_EMM_ASSUME_NW_SUPPORT_EPC_LCS,modem_sbp_config[64].SBP_EMM_ASSUME_NW_SUPPORT_EPC_LCS,OTA and OTA BY OP,no,no,no,yes,"This SBP is for some machine tests or real networks that supports EPS LPP data but it does not set up the EPC LCS bit in the attach accept. If this SBP is on, then UE can send LPP data in above cases.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE can send LPP data if the machine/network supports EPS LPP data but does not set up the EPC LCS bit in the attach accept.<BR>0:Disable. UE cannot send LPP data if the machine/network does not set up the EPC LCS bit in the attach accept.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5833,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_EMM_CONN_FAIL_ABNORMAL_B,modem_sbp_config[19].SBP_EMM_CONN_FAIL_ABNORMAL_B,OTA and OTA BY OP,no,no,no,yes,"CONN_FAIL means T300 timeout or RACH failure. TS 24.301 does not clear specify the UE's behavior if suffering CONN_FAIL. Thus, MTK provide this SBP to let user decide.<BR>If this SBP is enabled and UE establishs connection for ATTACH/TAU/SR but the connection cannot be established due to CONN_FAIL, the UE's behavior will follow TS 24.301 5.5.1.2.6 (b)/5.5.3.2.6(b)/5.6.1.6(b) according to its procedure; otherwise, UE will retry to establish connection immediately.<BR>The Japan operator's IOT has this kind of test that UE cannot send many RRCConectionRequest in a short time. Suggest that turn on this SBP for Japan product.<BR>In addition, Verizon also requests this kind of behavior.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Handling as abnormal case b if CONN_FAIL during establishing connection.<BR>0:Disable. Retry immediately if CONN_FAIL during establishing connection.,,,User could use compile option __SBP_EMM_CONN_FAIL_ABNORMAL_B__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5834,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_EMM_CONN_FAIL_SELECT_23G_FOR_CSFB,modem_sbp_config[82].SBP_EMM_CONN_FAIL_SELECT_23G_FOR_CSFB,OTA and OTA BY OP,no,no,no,yes,"It is not specified in spec how to handle CSFB when extended service request fails due to T300 expiry. Some operators require that if the extended service request procedure was initiated for CSFB and it fails due to T300 expiry, the UE shall attempt to select GERAN or UTRAN directly.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__DISABLE_EMM_CONN_FAIL_SELECT_23G_FOR_CSFB__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5835,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_EMM_CUST_BAR_BAD_CELL,modem_sbp_config[101].SBP_EMM_CUST_BAR_BAD_CELL,OTA and OTA BY OP,no,no,no,yes,"When SBP_EMM_CUST_BAR_BAD_CELL is enabled, EMM would call custom function under the specific conditions (e.g. attach/tau accept, attach/tau failed, NW request IMSI, LTE redirect to GSM,...). Customer could call customize_bar_lte_cell() to bar the bad cell in the custom functions.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled bar the bad cell feature.<BR>0:disabled bar the bad cell feature.,,,This feature can be disabled by compile option __ENABLE_EMM_CUST_BAR_FAKE_CELL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5836,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_EMM_CUST_MAP_EMM_CAUSE,modem_sbp_config[56].SBP_EMM_CUST_MAP_EMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"This feature is to let user map the received network reject cause to other reject cause that user want UE to behave. For example, when UE received reject #7, user does not want UE to behave #7 behavior but want #14 behavior. Then, user can enable this SBP and modify this file /mcu/pcore/custom/modem/common/ps/custom_emm_config.c to specify that #7 should be mapped to #14.<BR>One more reminder is that this feature is only applied in real network and not applied if inserting test sim. Verifying every reject cause behavior is very common for IOT or GCF cases. To prevent the IOT/GCF cases failure, MTK will keep following the spec behavior if inserting test sim.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. User can map network reject cause to other reject cause that user want.<BR>0:Disable. Follow spec reject cause handling.,,,User could use compile option __EMM_CUST_MAP_EMM_CAUSE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5837,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_EMM_DELAY_SEND_IMS_PDN_REQUEST,modem_sbp_config[99].SBP_EMM_DELAY_SEND_IMS_PDN_REQUEST,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled EMM will delay send the pending ESM message(IMS PDN request) after TAU procedure with active flag is true.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __SBP_EMM_DELAY_SEND_IMS_PDN_REQUEST__ flag,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5838,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_EMM_DUPLEX_CHG_NO_CELL_LOCAL_DET,modem_sbp_config[90].SBP_EMM_DUPLEX_CHG_NO_CELL_LOCAL_DET,OTA and OTA BY OP,no,no,no,yes,"When duplex mode change there will be power-off to let UE RF off first. Since EMM will attempt air detach for 5 seconds according to 3GPP TS24.301 5.5.2.2.1, it could introduce 5 seconds delay in the duplex mode change procedure if there is really no cell. To have better user exprience when leaving no cell environment upon duplex mode change ongoing, this SBP option is introduced. By enabling this option, UE will not try power detach over the air for 5 seconds, it will local detach directly instead if there is no cell when duplex mode change is ongoing.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Local detach<BR>0:Attempt air detach,,,NA,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5839,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_EMM_EIA0_NOT_SUPPORTED_WHEN_NORMAL_ATTACH,modem_sbp_config[96].SBP_EMM_EIA0_NOT_SUPPORTED_WHEN_NORMAL_ATTACH,OTA and OTA BY OP,no,no,no,yes,Test case fail. It didn't expect UE support EIA0 when normal attach/TAU.<BR>This feature is used to disable the EIA0 capability when normal attach.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:normal attach does not support EIA0.<BR>0:normal attach supports EIA0.,,,This feature is controlled by __SBP_EMM_EIA0_NOT_SUPPORTED_WHEN_NORMAL_ATTACH__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5840,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_EMM_EMC_EST_CONNECTION,modem_sbp_config[75].SBP_EMM_EMC_EST_CONNECTION,OTA and OTA BY OP,no,no,no,yes,"E911 call attempting to leave flight mode, force to setup RRC connection with cause emergency in EMM. This feature is introduced to conform with some test platform in machine test.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Force EMM setup RRC connection with cause emergency<BR>0:Not force EMM setup RRC connection with cause emergency,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5841,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_EMM_IGNORE_ALL_PS_PAGING_DURING_MMS_SESSION,modem_sbp_config[74].SBP_EMM_IGNORE_ALL_PS_PAGING_DURING_MMS_SESSION,OTA and OTA BY OP,no,no,no,yes,"This SBP is a new feature that non-data sim will ignore all PS paging when data sim performs MMS. It can avoid non-data SIM's PS paging interrupting data SIM's MMS. If you want to open this SBP, please notice the following comment:<BR>- If this SBP on, non-data sim may miss MT VoLTE call or MT SMS during data sim performs MMS.<BR>- Please MUST open SBP_EMM_IGNORE_PS_PAGING_DURING_MMS_SESSION_WHEN_IMS_DEREG.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Non-data sim will ignore all PS paging when data sim performs MMS.<BR>0:Disabled. Non-data sim does not ignore PS paging when data sim performs MMS.,,,This feature is controlled by __ENABLE_LTE_EMM_IGNORE_ALL_PS_PAGING_DURING_MMS_SESSION__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5842,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_EMM_IGNORE_MT_CS_WHEN_IMS_CALL,modem_sbp_config[18].SBP_EMM_IGNORE_MT_CS_WHEN_IMS_CALL,OTA and OTA BY OP,no,no,no,yes,"For some networks, they may send CS Service Notification to UE when VoLTE call is ongoing. It will cause UE to do CSFB and then VoLTE call will failed. This SBP is to ignore CS service notification when VoLTE call is ongoing.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will ignore CS service notification when VoLTE call is on going<BR>0:Disabled. UE will not ignore CS service notification when VoLTE call is on going and does CSFB,,,User could use compile option __OP01__ to switch the setting of this SBP,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5843,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH,Not Support,no,no,no,yes,ignore PS paging after data switch,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This feature is controlled by __IGNORE_PS_PAGING_AFTER_DATA_SWITCH__ flag,MD Config,Modem - Customer Requirement,,,phase out,Untested,,,,
+5844,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH_IMS_UNREGISTERED,modem_sbp_config[89].SBP_EMM_IGNORE_PS_PAGING_AFTER_DATA_SWITCH_IMS_UNREGISTERED,Not Support,no,no,no,yes,ignore PS paging after data switch when ims not reg,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This feature is controlled by __IGNORE_PS_PAGING_AFTER_DATA_SWITCH_IMS_UNREGISTERED__ flag,,,,,phase out,Untested,,,,
+5845,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_EMM_IGNORE_PS_PAGING_DURING_MMS_SESSION_WHEN_IMS_DEREG,modem_sbp_config[74].SBP_EMM_IGNORE_PS_PAGING_DURING_MMS_SESSION_WHEN_IMS_DEREG,OTA and OTA BY OP,no,no,no,yes,"This SBP is a new feature that if non-data sim is VoLTE off, then it will ignore PS paging when data sim performs MMS. It can avoid non-data SIM's PS paging interrupting data SIM's MMS. If you want to open this SBP, please notice the following comment:<BR>- If this SBP on, non-data sim may miss MT SMS during data sim performs MMS.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Disabled. Non-data sim does not ignore PS paging when data sim performs MMS.<BR>1:Enabled. If non-data SIM is VoLTE off, then it will ignore PS paging when data sim performs MMS.",,,This feature is controlled by __DISABLE_LTE_EMM_IGNORE_PS_PAGING_DURING_MMS_SESSION_WHEN_IMS_DEREG__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5846,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_EMM_IGNORE_TAC_ALL_ZEROS_CHECK,modem_sbp_config[30].SBP_EMM_IGNORE_TAC_ALL_ZEROS_CHECK,OTA and OTA BY OP,no,no,no,yes,"In some network(ex. RJIL), we found that it use 0x0000 as TAC value of a cell. In this cell, UE could not receive MT VoLTE Call in the IDLE mode.<BR>This is because MTK UE treats 0x0000 as deleted TAC Value, which follow the Table 9.9.3.32.1 of the spec. 24.301:<BR>- if a USIM is inserted in a mobile equipment with the tracking area code containing all zeros, then the mobile equipment shall recognise this TAC as part of a deleted TAI.<BR>On the other hand, According to the section 5.6.1.1 of 3GPP spec. 24.301,<BR>- the SERVICE REQUEST procedure may only be initiated by the UE when its EPS update status is EU1 UPDATED, and the TAI of the current serving cell is included in the TAI list.<BR>Because the TAI with 0x0000 TAC is a deleted TAI, it would not be in the TAI list, either. Although UE has received PAGING for EPS Services, UE would not send SERVICE REQUEST to establish RRC Connection. Hence, it could not receive MT VoLTE Call in the IDLE Mode because of this check. To become more tolerant to NW, we provide a workaround to pypass the check for the abnormal TAC value 0x0000, which is controlled by this SBP option.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE does not treat 0x0000 as deleted TAC so that it could send SERVICE REQUEST if the TAC of current cell is 0x0000.<BR>0:UE treats 0x0000 as deleted TAC which follow the definition of the spec 24.301.,,,This SBP option is enabled by compile option __EMM_IGNORE_TAC_ALL_ZEROS_CHECK__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5847,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_EMM_LOCAL_DETACH_WHEN_T3421_TIMEOUT_FOR_SIM_DETACH_IN_DEREG_STATE,modem_sbp_config[73].SBP_EMM_LOCAL_DETACH_WHEN_T3421_TIMEOUT_FOR_SIM_DETACH_IN_DEREG_STATE,OTA and OTA BY OP,no,no,no,yes,"NW may not response the DETACH REQ from UE for SIM plug out during ATTACH procedure. UE will retry DETACH REQ after T3421 timeout. This will influence the performance. <BR>MTK provides a workaround solution. If this SBP is enabled, UE will directely local detach when T3421 timeout in this scenario.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. local detach when T3421 timeout for SIM detach in DEREG state.<BR>0:Disable. does not local detach when T3421 timeout for SIM detach in DEREG state.,,,User could use compile option __DISABLE_EMM_LOCAL_DETACH_WHEN_T3421_TIMEOUT_FOR_SIM_DETACH_IN_DEREG_STATE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5848,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_EMM_NON_TEST_SIM_BEHAVIOR,modem_sbp_config[78].SBP_EMM_NON_TEST_SIM_BEHAVIOR,OTA and OTA BY OP,no,no,no,yes,"This SBP is used for internal IT purpose. When this SBP is on, EMM will still behave as inserted a NON TEST SIM card even if the actually inserted SIM card is a TEST SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable. Treat TEST SIM as TEST SIM.<BR>1:Enable. Treat TEST SIM as NON TEST SIM.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5849,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG,modem_sbp_config[72].SBP_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"Some networks may send SIP message during TAU when TAU request without active flag but network still establishes DRB, and the SIP message may be a MT VoLTE call. This SBP let UE occupy 5s CS semaphore in the above TAU scenario to protect connection not to be interrupted by other SIM and receives the SIP message.",BIT,1,,1,__SBP_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG__ : 1<BR>MT6885 : 1<BR>MT6873 : 0<BR>DEFAULT_VALUE : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, EMM will occupy cs semaphore when TAU request without active flag but network establishes DRB.<BR>0:Disable, EMM does not occupy cs semaphore when TAU request without active flag but network establishes DRB.",,,This feature is controlled by __DISABLE_LTE_EMM_OCCUPY_CS_WHEN_DRB_EST_DURING_TAU_WITH_NO_ACTIVE_FLAG__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5850,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_EMM_PERFORM_PAGING_AND_SYNC_TAU_TOGETHER,modem_sbp_config[104].SBP_EMM_PERFORM_PAGING_AND_SYNC_TAU_TOGETHER,OTA and OTA BY OP,no,no,no,yes,"When SIM1 ping data, SIM2 comes ps paging, SIM2 will get the RF. <BR>After 2s HPS timeout, SIM1 will preempt it and get the RF back.<BR>However SIM2 was preempt before, so SIM2 need to perform state sync TAU.<BR>Therefore, SIM1 will be preempt again.<BR>They will cause SIM1 to be preempt frequently.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,This feature is controlled by __DISABLE_PERFORM_PAGING_AND_SYNC_TAU_TOGETHER__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5851,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_EMM_PERFORM_PLMN_SEARCH_AFTER_DETACH_NOT_REQ_ABNORMAL,modem_sbp_config[58].SBP_EMM_PERFORM_PLMN_SEARCH_AFTER_DETACH_NOT_REQ_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"According to TS24.301 R13 requirement, UE shall enter EMM-DERREGISTERED and attempt to select GERAN or UTRAN and proceed with MM or GMM specific procedure or enter EMM-DEREGISTERED.PLMN-SEARCH in order to perform a PLMN selection according to 3GPP TS23.122. Use this SBP to decide if entering PLMN Search state or not.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5852,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_EMM_PROC_AS_FAIL_BAR_CELL,modem_sbp_config[66].SBP_EMM_PROC_AS_FAIL_BAR_CELL,OTA and OTA BY OP,no,no,no,yes,"For some temporary network issue, the ATTACH/TAU REQ is not sent successfully by lower layer due to the RLF. Then UE may retry ATTACH/TAU procedure after T3411(10 seconds) timeout and maximum retry count is 5.<BR>MTK provides a workaround solution. If this SBP is enabled, UE may bar the current camped cell when the multiple times of AS failure happened.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,User could use compile option __LTE_EMM_PROC_AS_FAIL_BAR_CELL__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5853,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_EMM_PROC_FAIL_HANDLING,modem_sbp_config[70].SBP_EMM_PROC_FAIL_HANDLING,OTA and OTA BY OP,no,no,no,yes,"There are some fake cells existed in some operators. The fake cell may Denial-of-Service by rejecting UE with cause #13,15 or directely ignore/release the connection for the NAS procedure initiated by UE.<BR>MTK provides a workaround solution. If this SBP is enabled, UE will bar the fake cell when UE detect the cell is a fake one.",BIT,1,,1,__DISABLE_LTE_DETACH_EMM_PROC_FAIL_HANDLING__ : 0 <BR>DEFAULT_VALUE : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Bar the fake cell when UE detect the cell is a fake one.<BR>0:Disable. No special handling for fake cell.,,,User could use compile option __DISABLE_LTE_EMM_PROC_FAIL_HANDLING__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5854,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_EMM_PROC_FAIL_HANDLING_BY_OP,modem_sbp_config[88].SBP_EMM_PROC_FAIL_HANDLING_BY_OP,OTA and OTA BY OP,no,no,no,yes,"This SBP is to let SBP_EMM_PROC_FAIL_HANDLING can be effective only on specific camped PLMN. One can enable this SBP and configure the operator that need to have SBP_EMM_PROC_FAIL_HANDLING, so that it will be more flexible for SBP_EMM_PROC_FAIL_HANDLING.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:The handling for EMM procedure fail is by operator<BR>0:The handling for EMM procedure fail is not by operator,,,This feature only effects when SBP_EMM_PROC_FAIL_HANDLING is enabled.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5855,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_EMM_PROC_NW_REL_BAR_CELL,modem_sbp_config[66].SBP_EMM_PROC_NW_REL_BAR_CELL,OTA and OTA BY OP,no,no,no,yes,"For some temporary network issue, NW may not response the ATTACH/TAU/SR procedure and release the connection. Then UE may retry ATTACH/TAU procedure after T3411(10 seconds) timeout and maximum retry count is 5.<BR>MTK provides a workaround solution. If this SBP is enabled, UE may bar the current camped cell when the NW release connection during EMM procedure happened.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,User could use compile option __LTE_EMM_PROC_NW_REL_BAR_CELL__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5856,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_EMM_R14_INDICATE_SWITCH_OFF_FOR_USIM_REMOVAL,modem_sbp_config[78].SBP_EMM_R14_INDICATE_SWITCH_OFF_FOR_USIM_REMOVAL,OTA and OTA BY OP,no,no,no,yes,"According to TS24.301 R14 CR2670, UE should indicate switch_off bit as TRUE when USIM removal. If this SBP is on, UE will follow R14 CR2670's requirement.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Indicate switch off bit in DETACH REQ for USIM REMOVAL.<BR>0:Disable. Does not indicate switch off bit in DETACH REQ for USIM REMOVAL.,,,User could use compile option __DISABLE_EMM_R14_INDICATE_SWITCH_OFF_FOR_USIM_REMOVAL__ to switch the setting of this SBP.(After M50),MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5857,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_EMM_REJ_CAUSE_2_ADD_TO_FTAI,modem_sbp_config[54].SBP_EMM_REJ_CAUSE_2_ADD_TO_FTAI,OTA and OTA BY OP,no,no,no,yes,"For some abnormal NW evironment, it may keeps responding ATTACH/TAU accept but EPS only with cause #2 to UE. It may cause UE unable to make/get a CS call.<BR>MTK provides a workaround solution. If this SBP is enabled and UE receives ATTACH/TAU accept but EPS only with cause #2 from real network, UE will store the current TAI into FTAI list to prevent UE reselect to that abnormal cell again.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. store the current TAI to FTAI list when UE receives ATTACH/TAU accept but EPS only with cause #2.<BR>0:Disable. Follow spec ATTACH/TAU accept but EPS only with cause #2 handling.,,,User could use compile option __EMM_REJ_CAUSE_2_ADD_TO_FTAI__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5858,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_DIFF_PLMN,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_DIFF_PLMN,OTA and OTA BY OP,no,no,no,yes,"When UE performs ATTACH/TAU/SR for initiating a PDN connection for emergency bearer services but receiving reject message or occuring abnormal cases, the description of spec TS 24.301 5.5.1.2.5B/5.5.3.2.5A/5.5.3.2.5A/5.6.1.5A only defines UE could change to perform emergency attach in the same plmn but not define UE's behavior if UE camps different PLMN. MTK provide the option to let UE change to perform emergency attach in the PLMN which is different from that of the last ATTACH/TAU/SR was attempted. <BR>If this SBP is enabled and SBP_EMM_RETRY_EMC_WHEN_ABNORMAL is also enabled, UE will choose action (b) in the different PLMN when receiving reject or abnormal cases during normal ATTACH/TAU/SR for initating a PDN connection for emegency bearer service. Otherwise, UE will choose action (a).<BR>For detail description of action (a) and action (b), please refer to the sections of TS 24.301 mentioned above.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service in different PLMN.<BR>0:Disabled. EMM always reject LTE emergency bearer service in different PLMN.,,,"User could use compile option __EMM_RETRY_EMC_IN_DIFF_PLMN__ to switch the setting of this SBP. If user wants to turn on this SBP, SBP_EMM_RETRY_EMC_WHEN_ABNORMAL should also be turned on.Otherwise, the retry behavior will not work.",MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5859,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SAME_PLMN,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SAME_PLMN,OTA and OTA BY OP,no,no,no,yes,"When UE performs ATTACH/TAU/SR for initiating a PDN connection for emergency bearer services but receiving reject message or occuring abnormal cases, <BR>according to the description of spec TS 24.301 5.5.1.2.5B/5.5.3.2.5A/5.5.3.2.5A/5.6.1.5A, it has defined UE could change to perform emergency attach in the same plmn.<BR>If this SBP is enabled and SBP_EMM_RETRY_EMC_WHEN_ABNORMAL is also enabled, UE will choose action (b) in the same PLMN when receiving reject or abnormal cases during normal ATTACH/TAU/SR for initating a PDN connection for emegency bearer service. Otherwise, UE will choose action (a).<BR>For detail description of action (a) and action (b), please refer to the sections of TS 24.301 mentioned above.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service in same PLMN.<BR>0:Disabled. EMM always reject LTE emergency bearer service in same PLMN.,,,"User could use compile option __EMM_RETRY_EMC_IN_SAME_PLMN__ to switch the setting of this SBP. If user wants to turn on this SBP, SBP_EMM_RETRY_EMC_WHEN_ABNORMAL should also be turned on.Otherwise, the retry behavior will not work.",MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5860,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SHARED_NW,modem_sbp_config[12].SBP_EMM_RETRY_EMC_IN_SHARED_NW,OTA and OTA BY OP,no,no,no,yes,"When UE requests LTE emergency bearer services but receiving reject message or occuring abnormal cases in shared network enviornment, the below spec description has defined UE could perform emergency attach to another PLMN in the shared network.<BR>If this SBP is enabled and SBP_EMM_RETRY_EMC_WHEN_ABNORMAL is also enabled, UE will choose action (b) when receiving reject or abnormal cases during requesting LTE emergency bearer services in shared network enviornment. Otherwise, UE will choose action (a). <BR><BR>- TS 24.301 5.5.1.2.5A<BR>In a shared network, upon receiving the ATTACH REJECT message, the UE shall perform the actions as described in subclause 5.5.1.2.5, and shall: a) inform the upper layers of the failure of the procedure; or b) attempt the attach for emergency bearer services to another PLMN in the shared network. <BR>In a shared network, if the attach request for emergency bearer services fails due to abnormal case a) in subclause 5.5.1.2.6, the UE shall perform the actions as described in subclause 5.5.1.2.6 and shall: a) inform the upper layers of the failure to access the network; or b) attempt the attach for emergency bearer services to another PLMN in the shared network.<BR>In a shared network, if the attach request for emergency bearer services fails due to abnormal cases b), c) or d) insubclause 5.5.1.2.6, the UE shall perform the actions as described in subclause 5.5.1.2.6, and shall: a) inform the upper layers of the failure of the procedure; or b) attempt the attach for emergency bearer services to another PLMN in the shared network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service in shared network.<BR>0:Disabled. EMM always reject LTE emergency bearer service in shared network.,,,"User could use compile option __EMM_RETRY_EMC_IN_SHARED_NW__ to switch the setting of this SBP.If user wants to turn on this SBP, SBP_EMM_RETRY_EMC_WHEN_ABNORMAL should also be turned on.Otherwise, the retry behavior will not work.",MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5861,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_EMM_RETRY_EMC_WHEN_ABNORMAL,modem_sbp_config[12].SBP_EMM_RETRY_EMC_WHEN_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"When UE requests LTE emergency bearer services but receiving reject message or occuring abnormal cases, According to the description of spec TS 24.301 5.5.1.2.5A/5.5.1.2.5B/5.5.3.2.5A/5.6.1.5A, it has defined UE could have different actions.<BR>If this SBP is disabled, UE will choose action (a) when receiving reject or abnormal cases during requesting LTE emergency bearer services. Otherwise, UE will choose action b) but further actions depend on other SBP feature.<BR>For detail description of action (a) and action (b), please refer to the sections of TS 24.301 mentioned above.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. EMM could retry LTE emergency bearer service when reject or abnormal cases occured.<BR>0:Disable. EMM always reject LTE emergency bearer service when reject or abnormal cases occured.,,,"User could use compile option __EMM_RETRY_EMC_WHEN_ABNORMAL__ to switch the setting of this SBP.If this SBP is enabled to let UE perform (b) action, user should also turn on corresponding SBP, i.e.SBP_EMM_RETRY_EMC_IN_SHARED_NW, SBP_EMM_RETRY_EMC_IN_SAME_PLMN, or SBP_EMM_RETRY_EMC_IN_DIFF_PLMN whichdepend on user's preference.",MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5862,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EMM_SEARCH_NORMAL_FOR_ECC_CALL,modem_sbp_config[89].SBP_EMM_SEARCH_NORMAL_FOR_ECC_CALL,OTA and OTA BY OP,no,no,no,yes,"For DOCOMO IOT tests, when making ECC call and deciding to search GERAN or UTRAN, use normal call type to inform NWSEL if UE attached to LTE<BR>so that NWSEL would search normal later. Otherwise, NWSEL would search any for ECC call and UE would not perform RAU as test plan expected.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,User could use compile option __SBP_EMM_SEARCH_NORMAL_FOR_ECC_CALL__ to enable this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_EMM_SHORTEN_T3440,modem_sbp_config[71].SBP_EMM_SHORTEN_T3440,OTA and OTA BY OP,no,no,no,yes,"The length of T3440 describe in TS24.301 is 10 seconds. For some scenario that UE do not receive the RRCConnectionRelease Req from NW, UE have to wait T3440 timeout to proceed the next procedure. It will influence the UE performance.<BR>MTK provides a workaround solution. If this SBP is enabled, UE will shorten the T3440 as 2 seconds.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Shorten the T3440 length.<BR>0:Disable. keep using the default value for T3440.,,,User could use compile option __DISABLE_LTE_EMM_SHORTEN_T3440__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5864,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_EMM_SUPPORT_IE_BLACK_LIST,modem_sbp_config[98].SBP_EMM_SUPPORT_IE_BLACK_LIST,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, EMM would provide black list functionality for setting Attach/TAU request IE.<BR>Otherwise, EMM would not refer to IE black list when setting IEs.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1: Enabled:support IE black list functionality.<BR>0: Disabled:do not support IE black list functionality.,,,This SBP could be controlled(disabled) by compile option __EMM_DISABLE_IE_BLACK_LIST__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5865,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_EMPTY_1,modem_sbp_config[53].SBP_EMPTY_1,Not Support,yes,yes,no,yes,N/A<BR>N/A,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,N/A,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+5866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_EMR_REPORTING_WITH_SI2Q_BSIC_PARA,modem_sbp_config[7].SBP_EMR_REPORTING_WITH_SI2Q_BSIC_PARA,OTA and OTA BY OP,no,no,no,yes,"By This feature is used to report Enhanced Measurement Report by SI2quater and SI5series<BR>if NW doesn't broadcast Measurement Information.<BR>When this SBP's value is 1, it means UE supports Enhanced Measurement Reporting by SI2quater and SI5series<BR>When this SBP's value is 0, it means UE doesn't support Enhanced Measurement Reporting by SI2quater and SI5series",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:it means UE doesn't support Enhanced Measurement Reporting by SI2quater and SI5series<BR>1:it means UE supports Enhanced Measurement Reporting by SI2quater and SI5series,,,"Default value depends on compilation flag __EMR_REPORTING_WITH_SI2Q_BSIC_PARA__,<BR>if this flag is ON, then default value is 1 otherwise 0",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5867,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_ENABLE256QAM_UNDER_TEST_SIM,modem_sbp_config[84].SBP_ENABLE256QAM_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE is able to enable DL 256QAM when Test SIM used.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5868,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_ENABLE_1XRTT_ICS_OPTIMIZATION,modem_sbp_config[101].SBP_ENABLE_1XRTT_ICS_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"This SBP when enabled will enable the 1xRTT ICS optimization, such as Traffic release to Idle immediately, bypass sync acquisition.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,NA,MD Config,Modem - Customer Requirement,,,MO/MT call in Live NW,Pass,,,,
+5869,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_ENABLE_CALL_PREFER_IN_UNACK_MODE,modem_sbp_config[82].SBP_ENABLE_CALL_PREFER_IN_UNACK_MODE,OTA and OTA BY OP,no,no,no,yes,"Sometimes in 2G, during data transfer, NW assign the RLC unack mode to UE. So to protect the unack mode data transfer, peer SIM will be suspended so that throughput will not be impacted. But at the same time, peer SIM will not be able to make MO Call/SMS nor it can receive paging for MT Call/SMS. So this SBP allow to prefer peer SIM MO/MT Call/SMS or unack mode data trasnfer. If SBP is enanled then peer SIM will be in Virtual IDLE mode and able to make/receive MO/MT Call/SMS. If SBP disable then peer SIM will be suspended and full RF utilization is for Unack mode data trasnfer SIM.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Don't Protect the 2G Unack mode data tranfer, Prefer Peer SIM Call<BR>0:Protect the 2G Unack mode data tranfer, Prefer Unack data",,,__ENABLE_CALL_PREFER_IN_UNACK_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5870,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_ENABLE_CSFB_ONGOING_STATUS_EARLY,modem_sbp_config[71].SBP_ENABLE_CSFB_ONGOING_STATUS_EARLY,OTA and OTA BY OP,no,no,no,yes,"For CSFB to 2G scenario, if RR connection establish failed UE will camp on 2G cell and reselect to 4G by AS. But customer request UE should AFR to 4G for this scenario and they can accept the risk of missing paging on 2G NW. So this SBP is added to control this feature.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __ENABLE_CSFB_ONGOING_STATUS_EARLY__ is defined, the SBP is enabled",,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_ENABLE_D4U5_FOR_TESTSIM,modem_sbp_config[76].SBP_ENABLE_D4U5_FOR_TESTSIM,OTA and OTA BY OP,no,no,no,yes,"For test sim, customer may want to select test category 4 or category D4U5 when no CA.<BR>This SBP is used to control UE report category D4U5 or Category 4 when no CA under test sim. When No CA for test sim: If this sbp value is 0, report category is category 4. If this sbp value is 1, report category is category D4U5.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,"After LR12A.R2.MP branch: if define __SBP_ENABLE_D4U5_FOR_TESTSIM__, this sbp value would be 1. After UMOLYE.TRUNK branch: if defined __SBP_DISABLE_D4U5_FOR_TESTSIM__, this sbp value would be 0.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_ENABLE_HNB_NAME_URC,modem_sbp_config[41].SBP_ENABLE_HNB_NAME_URC,OTA and OTA BY OP,no,no,no,yes,This SBP item is to control the support of URC +EHNBTYPE: &type&.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,"After UE registering, check whether AP behaves normally",Pass,,,,
+5873,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_ENABLE_IRAT_RSTD,modem_sbp_config[93].SBP_ENABLE_IRAT_RSTD,OTA and OTA BY OP,no,no,no,no,"This SBP feature option is used to enable/disable IRAT RSTD feature.<BR>By enabling this feature, UE can measure 4G-PRS while 5G in NR SA mode, as specify in 3GPP R15",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,LTE OTDOA (Observed Time Difference Of Arrival),4G,,,Test in machine Y<BR>Test Time (minutes) 10 <BR>[Init] According to RD IT SOP<BR>[Test Step] Trigger IRAT-RSTD OTDOA procedure<BR>[Expected Result] UE shall report IRAT-RSTD OTDOA report,Pass,,,,
+5874,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_ENABLE_IVSR_23G_ONLY_GPRS_NOT_ALLOW,modem_sbp_config[69].SBP_ENABLE_IVSR_23G_ONLY_GPRS_NOT_ALLOW,OTA and OTA BY OP,no,no,no,yes,UE is registered on LTE and goes to 2/3G by procedures such as CSFB. Then UE receives reject cause #7 on PS domain. UE still trigger IVSR even if UE has no successful registration history on 2/3G if this SBP and SBP_ENABLE_MODEM_IVSR are turned on.,BIT,1,,1,DEFAULT_VALUE : 0 <BR>__ENABLE_IVSR_23G_ONLY_GPRS_NOT_ALLOW__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __ENABLE_IVSR_23G_ONLY_GPRS_NOT_ALLOW__ is defined, the SBP is enabledShould turn on SBP_ENABLE_MODEM_IVSR",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5875,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_ENABLE_MODEM_IVSR,modem_sbp_config[57].SBP_ENABLE_MODEM_IVSR,OTA and OTA BY OP,no,no,no,yes,"When UE fails to register network and enters &Invalid SIM& state, decide if this reject cause or &Invalid SIM& state is an abnormal condition of network. If we regards it as abnormal condition, modem would try to recover UE from &invalid SIM& state without turn-off UE.<BR>This feature would violate spec since UE just recovers from &Invalid SIM& state automatically and then tries to search network again.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_ENABLE_PERIODIC_CLEAR_FPLMN_TIMER,modem_sbp_config[74].SBP_ENABLE_PERIODIC_CLEAR_FPLMN_TIMER,OTA and OTA BY OP,no,no,no,yes,"If SBP is on, UE will start PERIODIC_CLEAR_FPLMN_TIMER when a FPLMN is added. When the timer expires, FPLMN list will be cleared.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This SBP can be controlled by compile option __ENABLE_PERIODIC_CLEAR_FPLMN_TIMER__,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5877,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_ENABLE_RF_SCAN_FOR_DESENSE_TEST,modem_sbp_config[91].SBP_ENABLE_RF_SCAN_FOR_DESENSE_TEST,OTA and OTA BY OP,no,no,no,yes,Support of RF scan for desense test .,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,This SBP is present under compilation flag __ENABLE_RF_SCAN_FOR_DESENSE_TEST__ which is used in setting the SBP value.<BR>The compile option __RF_SCAN_FOR_DESENSE_TEST__ is used in enabling or disabling the feature.,,,,,"After enabling the SBP, check AT+ERFSCAN can be sent",Pass,,,,
+5878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_ENABLE_SEMI_PERSISTENT_SCHEDULING,modem_sbp_config[70].SBP_ENABLE_SEMI_PERSISTENT_SCHEDULING,OTA and OTA BY OP,no,no,no,yes,"This SBP control Semi-Persistent Scheduling(fgi bit 29) feature.<BR>If SBP ID is TMO and this SBP is enable, force enable Semi-Persistent Scheduling(fgi bit 29).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5879,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_ENABLE_SGSGN_REL_CHECK,modem_sbp_config[41].SBP_ENABLE_SGSGN_REL_CHECK,OTA and OTA BY OP,no,no,no,yes,"In some of the in house network, we have noticed that becuase of MTK UE is always sending Revision Level Indicator as "1 - used by a mobile station supporting R99 or later versions of the protocol" in MS Network Capability IE , test case is failing. As test case is expecting Revision Level Indicator should be matched with the network given SGSN Release.<BR>So we need to change the UE behaviour according to network. For this, we have introduced this SBP. If this SBP is enabled, UE should consider SGSN Release of network while sending Revision Level Indicator in MS Network Capability IE. If network supports SGSN release as 98 then UE should send Revision Level Indicator as 98.<BR>Following is the network given SGSN value to UE in System Information 13.<BR>- 0 The SGSN is Release '98 or older <BR>- 1 The SGSN is Release '99 or older <BR>When this SBP is enabled, in some of the network,( which supports SGSN as 98) it is obseved that network is not assigning high multislot class capabilities to UE during PS data transfer in GSM. So better to disable this SBP if such newtork behaviour is observed.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. UE should consider SGSN Release of network while sending Revision Level Indicator in MS Network Capability<BR>0:Disable. UE is not considering SGSN Release of network while sending Revision Level Indicator in MS Network Capability,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5880,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_ENABLE_SML_MAX_RETRY_COUNT,modem_sbp_config[93].SBP_ENABLE_SML_MAX_RETRY_COUNT,Not Support,no,no,no,yes,This feature is used to enable/disable SIM-ME lock Max Retry Count facility,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is controlled by __SML_MAX_RETRY_COUNT__ flag,SIM ME Lock,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+5881,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_ENAS_TRIGGER_LTE_NW_RELEASE,modem_sbp_config[84].SBP_ENAS_TRIGGER_LTE_NW_RELEASE,OTA and OTA BY OP,no,no,no,yes,"In dual SIM case, UE could be state un-sync with network in a short period to miss next MT call due to peer SIM interrupting current RRC connection. This feature could prevents possible next MT call missing in such state un-sync short period for peer SIM interruption. The SBP eanble allows ENAS to trigger network to release connection.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,__SBP_ENAS_TRIGGER_LTE_NW_RELEASE__,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5882,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_ENAS_TRIGGER_REEST,modem_sbp_config[97].SBP_ENAS_TRIGGER_REEST,OTA and OTA BY OP,no,no,no,yes,"In dual SIM case, UE could be state un-sync with network in a short period to miss next MT call due to peer SIM interrupting current RRC connection. This feature could prevents possible next MT call missing in such state un-sync short period for peer SIM interruption. The SBP eanble allows ENAS to trigger special connection reestablishment to release RRC connection.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,__SBP_ENAS_TRIGGER_REEST__,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5883,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_END_CONNECTED_MODE_OOS_AFTER_PLMN_LOSS,modem_sbp_config[62].SBP_END_CONNECTED_MODE_OOS_AFTER_PLMN_LOSS,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turned on, UE will force to terminate the connected mode OOS state after PLMN loss. UE may select PLMN/RAT other than the OOS PLMN/RAT.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __SBP_END_CONNECTED_MODE_OOS_AFTER_PLMN_LOSS__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5884,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_ENFORCE_PS_DATA_OFF_IF_PDN_GW_NOT_SUPPORT,modem_sbp_config[81].SBP_ENFORCE_PS_DATA_OFF_IF_PDN_GW_NOT_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"The motivation of this SBP is that the 3GPP spec does not specify whether the UE should support PS DATA OFF when the PDN does not support PS DATA OFF. It is possible that certain operators support PS DATA OFF, but some PDNs in their networks do not support PS DATA OFF. In this case, we use this SBP to control the UE behavior. Note that this SBP is meaningless if SBP_PS_DATA_OFF_SWITCH is off.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If this PDN does not support PS DATA OFF, the UE will run PS DATA OFF logic on this PDN<BR>0:If this PDN does not support PS DATA OFF, the UE will not run PS DATA OFF logic on this PDN. The UE runs the existing MTK data off logic.",,,Feature could be enabled by enabling compiler option __SBP_ENFORCE_PS_DATA_OFF_IF_PDN_GW_NOT_SUPPORT__. Note that this SBP is meaningless if SBP_PS_DATA_OFF_SWITCH is off.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5885,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_ENHANCED_SOR,modem_sbp_config[19].SBP_ENHANCED_SOR,OTA and OTA BY OP,no,no,no,yes,"When doing higher priority PLMN search because of steering of roaming and receiving abnormal reject, do not try other rat of this PLMN. In addition, T3311/T3211 would shorten from 15s to 5s.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,This feature is controlled by __ENHANCED_SOR__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5886,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_ENS,modem_sbp_config[3].SBP_ENS,OTA,no,no,no,yes,"This SBP is used to support the requirement of AT&T Enhanced Network Selection (ENS). The requirement includes:<BR>- HPPLMN search period timer is started, stopped or updated according to File Change Notification.<BR>- UE's behavior when the EF-EHPLMN or EF-Acting HPLMN is present or not present.<BR>- SIM Terminal Support flag to determine whether or not the corresponding application is to be executed.<BR>- Send location information event when UE is in limited service.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __ENS__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5887,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_ENS_RAT_BALANCING,modem_sbp_config[3].SBP_ENS_RAT_BALANCING,OTA,no,no,no,yes,"This feature is required by AT&T to balance the loading of terminals in different RAT mode.<BR>When this feature is operated, modem will actively control the RAT mode according to the indicator read from SIM file.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,"Insert AT&T card, observe whether RAT mode setting can be configure correctly",Pass,,,,
+5888,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_EPLMN_RETRY_RESTRICTION_SUPPORT,modem_sbp_config[39].SBP_EPLMN_RETRY_RESTRICTION_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"The SBP supports the 3GPP work item RISE, which extends the scope of Back-off timer to Equivalent PLMNs (EPLMNs) in Release 13 of both the specifications TS24.301 and TS24.008. When starting a back-off timer (against the combination of APN and current Registered PLMN), UE determines whether to also block the current EPLMN list by following the EPLMNC flag of the Re-attempt indicator in SM/ESM reject message. <BR>If the SBP is on, the UE supports the handling of the EPLMNC flag in Re-attempt indicator, i.e., the current EPLMN list can be blocked together with the Registered PLMN during the running period of a back-off timer in some cases. <BR>If off, the UE does not support the handling of the EPLMNC flag in Re-attempt indicator, so the current EPLMN list is not possible to be blocked together with the Registered PLMN.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+5889,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_EPS_ONLY_CAUSE18_SELECT23G,modem_sbp_config[89].SBP_EPS_ONLY_CAUSE18_SELECT23G,OTA and OTA BY OP,no,no,no,yes,"According to the requirement, UE should select 23G to set up CS CALL when UE is EPS only attached with #18.<BR>If enable this SBP, UE will select 23G when UE is eps only #18.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,This SBP can be controlled by compile option __SBP_EPS_ONLY_CAUSE18_SELECT23G__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5890,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_EPS_ONLY_WHEN_IMS_REGISTERED,modem_sbp_config[28].SBP_EPS_ONLY_WHEN_IMS_REGISTERED,OTA and OTA BY OP,no,no,no,yes,"This SBP was used to control UE mode depended on IMS registration status. Once the SBP enabled, UE mode will be PS mode 1 or PS mode 2 when IMS registered when VDP was IMS PS voice only and UE prefer sms over ip.<BR>Otherwise, UE mode will be CS/PS mode 1 or CS/PS mode 2.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __EPS_ONLY_WHEN_IMS_REGISTERED__ in makefile.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5891,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_ERRC_CAPABILITY_OFF_BY_PLMN,modem_sbp_config[103].SBP_ERRC_CAPABILITY_OFF_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to turn off the supported ERRC capability by PLMN. User can set mapping table in NVRAM.<BR>ERRC read the NVRAM and check the which capability should be off. <BR>SBP value:1(ON)/0(OFF)<BR><BR>Modify NVRAM_EF_ERRC_CUSTOM_FEATURE_LID<BR>1. add entry in cap_by_plmn_table(max:8)<BR>2. fill-in plmnid_list which indicate PLMN should be applied<BR>3. fill-in exclude_plmn_status which this setting is applied for this PLMN only or all PLMN except this PLMN<BR>3. fill-in capability_name as following(NVRAM_CAPA_LOGGEDMEASUREMENTSIDLER10=0x01, NVRAM_CAPA_STANDALONEGNSSLOCATIONR10=0x02)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,This feature is based on SBP_ERRC_CAPABILITY_OFF_BY_PLMN.,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5892,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_ERRC_HO_SIB_READ_TIMER,modem_sbp_config[38].SBP_ERRC_HO_SIB_READ_TIMER,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to enable the customized LTE SIB read timer during handover(HO) procedure. When this SBP enable, UE will use customized sib read guard timer during HO. The customized timer can be configured in NVRAM_EF_ERRC_PERFORMANCE_PARA_LID.<BR>- ho_mib_sib1_read_timer is for MIB/SIB1 read timer during handover, unit is 10ms.<BR>- ho_sib2_read_timer is for SIB2 read timer during handove, unit is 10ms.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the customized LTE SIB read timer during handover<BR>0:Disable the customized LTE SIB read timer during handover,,,User could use compile option __ERRC_HO_SIB_READ_TIMER__ to switch the setting of this SBP.,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+5893,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_ERRC_HST_ENHANCED_DEMODULATION,modem_sbp_config[59].SBP_ERRC_HST_ENHANCED_DEMODULATION,OTA and OTA BY OP,no,no,no,yes,"For enhancing high speed scenario performance, R14 CR 2448 of TS 36.331 related mechanism is implemented. This CR introduces new IEs that include the measurement enhancements indicator, UE demodulation enhancements indicator, and PRACH enhancements parameters for high speed scenario.<BR>The new field &highSpeedEnhancedDemodulationFlag-r14& in RadioResourceConfigCommon IE is to indicate if the UE shall apply UE demodulation enhancements for SFN scenario.<BR>The detail description of highSpeedEnhancedDemodulationFlag-r14, see TS 36.331.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,this feature is controlled by __EHST_ENABLE__.,High Speed Train (HST),MTK Proprietary,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5894,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_ERRC_HST_ENHANCED_MEAS,modem_sbp_config[58].SBP_ERRC_HST_ENHANCED_MEAS,OTA and OTA BY OP,no,no,no,yes,"For enhancing high speed scenario performance, R14 CR 2448 of TS 36.331 related mechanism is implemented. This CR introduces new IEs that include the measurement enhancements indicator, UE demodulation enhancements indicator, and PRACH enhancements parameters for high speed scenario.<BR>The new field "highSpeedEnhancedMeasFlag-r14" in RadioResourceConfigCommon IE is to indicate if the UE shall apply the measurement enhancements for high speed scenario. <BR>The detail description of highSpeedEnhancedMeasFlag-r14, see TS 36.331.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,This feature is controlled by __EHST_ENABLE__.,High Speed Train (HST),MTK Proprietary,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5895,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_ERRC_HST_PRACH_CONFIG_ENHANCED,modem_sbp_config[59].SBP_ERRC_HST_PRACH_CONFIG_ENHANCED,OTA and OTA BY OP,no,no,no,yes,"For enhancing high speed scenario performance, R14 CR 2448 of TS 36.331 related mechanism is implemented.This CR introduces new IEs that include the measurement enhancements indicator, UE demodulation enhancements indicator, and PRACH enhancements parameters for high speed scenario.<BR>The new field "prach-config-v1430" in RadioResourceConfigCommon/RadioResourceConfigCommonSIB/RadioResourceConfigCommonScell IEs is to indicate the new set of PRACH resources for performance enhancements for high speed scenario.<BR>The detail description of prach-config-v1430, see TS 36.331.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,This feature is controlled by __EHST_ENABLE__.,High Speed Train (HST),MTK Proprietary,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5896,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_ERRC_HST_PRACH_ZERO_CORRELATION_ZONE,modem_sbp_config[59].SBP_ERRC_HST_PRACH_ZERO_CORRELATION_ZONE,Not Support,no,no,no,yes,"For enhancing high speed scenario performance, R14 CR 2448 of TS 36.331 related mechanism is implemented.This CR introduces new IEs that include the measurement enhancements indicator, UE demodulation enhancements indicator, and PRACH enhancements parameters for high speed scenario.<BR>The new field &zeroCorrelationZoneConfigHighSpeed& in PRACH-Config and RadioResourceConfigCommon IEs is to indicate the new set of PRACH resources for performance enhancments for high speed scenario:<BR>zeroCorrelationZoneConfigHighSpeed: The field indicates NCS configuration for the performance enhancement restricted set in high speed scenario, see TS 36.211 [5.7.2].<BR>If this field is present, the UE shall generate random access preambles based on performance enhancement restricted set.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1: <BR>enabled,,,N/A,High Speed Train (HST),MTK Proprietary,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
5897,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_ERRC_IRAT_MEASURE_IN_VIRTUAL_MODE,modem_sbp_config[39].SBP_ERRC_IRAT_MEASURE_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConduct IRAT Measurement in Virtual Modebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,"__ERRC_IRAT_MEASURE_IN_VIRTUAL_MODE__,SBP_IRAT_IN_VIRTUAL_MODE",IRAT in V-idle,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5898,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_ERRC_PS_CALL_PROTECTION_FROM_MT_PAGING,modem_sbp_config[73].SBP_ERRC_PS_CALL_PROTECTION_FROM_MT_PAGING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport channel protection for MT PS callbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test by MT paging,Pass,,,,
-5899,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_ETWS_FOR_AOSP_DESIGN,modem_sbp_config[102].SBP_ETWS_FOR_AOSP_DESIGN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureURC format for reporting the ETWS primary notification is according to the ETWS APP for GOOGLE AOSP designbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5900,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_EUTRAN_CAPABILITY_ADJUSTMENT_FOR_VIRTUAL_SIM,modem_sbp_config[85].SBP_EUTRAN_CAPABILITY_ADJUSTMENT_FOR_VIRTUAL_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAdjust the EUTRAN capability for virtual SIMbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5901,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_EUTRAN_OOS_RESET_CELL_INFO_AND_PS_UNREG,modem_sbp_config[61].SBP_EUTRAN_OOS_RESET_CELL_INFO_AND_PS_UNREG,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurereset cell info and switch ps network state as unregistered when OOSbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-5902,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_EXTENDED_PCO_SUPPORT,modem_sbp_config[87].SBP_EXTENDED_PCO_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureextended pco support in ue network capability IEbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1: Enabled: Enabled:UE Will set ePCO bit in ue network capability IE when the n1 mode is supported by TS 24.301 CR#3006.<BR>0: Disabled:UE Will Not set ePCO bit in ue network capability IE even though the n1 mode is supported.,,,__DISABLE_EXTENDED_PCO_SUPPORT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5903,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_EXTEND_IMS_STATUS_UNSPECIFIED_WHEN_CAUSE18,modem_sbp_config[56].SBP_EXTEND_IMS_STATUS_UNSPECIFIED_WHEN_CAUSE18,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureextend IMS status to unspecified when entering cause18 plmn w/ CS_PS_MODE1bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,IMS,IMS,,,,Pass,,,,
-5904,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_EXTEND_LTE_PAGING_CYCLE_IN_VIRTUAL,modem_sbp_config[98].SBP_EXTEND_LTE_PAGING_CYCLE_IN_VIRTUAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureExtend LTE paging cycle when other SIM is doing PS transferbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:user can extend LTE paging cycle by AT command.<BR>0:user cannot extend LTE paging cycle.,,,__SBP_EXTEND_LTE_PAGING_CYCLE_IN_VIRTUAL__,L+L,Multiple SIM,,,,Pass,,,,
-5905,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_EXTRA_FILE_SELECTION_AFTER_SAT_COMMAND,modem_sbp_config[24].SBP_EXTRA_FILE_SELECTION_AFTER_SAT_COMMAND,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. No need after UMOLYAbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-5906,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_FAST_HO_FOR_SPECIAL_SCENARIO,modem_sbp_config[67].SBP_FAST_HO_FOR_SPECIAL_SCENARIO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureenable fast ho for special scenariobit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-5907,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_FAST_HPPLMN_SEARCH,modem_sbp_config[20].SBP_FAST_HPPLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen UE registers on a VPLMN, it would immediately perform fast list once for higher priority PLMN.bit 0:0:Disabled. Not perform fast list immediately after registrationbit 1:1:Enabled. Perform fast list immediately after registration",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5908,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_FAST_MCC_JUDGEMENT,modem_sbp_config[74].SBP_FAST_MCC_JUDGEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable fast MCC judgementbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-5909,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_FAST_RECOVERY_IN_VIRTUAL_MODE,modem_sbp_config[80].SBP_FAST_RECOVERY_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,2G will perform Fast Recovery in Virtual Mode.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:2G will perform Fast Recovery in Virtual Mode.<BR>0:Follow old design, 2G will not perform Fast Recovery in Virtual Mode.",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5910,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_FAST_ROAMING_SEARCH,modem_sbp_config[19].SBP_FAST_ROAMING_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply fast roaming sesarch feature.bit 0:0:Disabled. Disable fast roaming search featurebit 1:1:Enabled. Enable fast roaming search feature",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5911,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_FAST_SCAN_STORED_LIST_SUPPORT,modem_sbp_config[9].SBP_FAST_SCAN_STORED_LIST_SUPPORT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This SBP is not used anymore.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-5912,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_FDD_ECSFB_AVOID_LU_FAIL_CELLS,modem_sbp_config[76].SBP_FDD_ECSFB_AVOID_LU_FAIL_CELLS,OTA and OTA BY OP,no,no,no,yes,During CSFB from LTE avoid selection of a cell where LU failure occured previously.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will avoid selection to LU failure cells.<BR>0:GSM will follow normal eCSFB design.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5913,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_FINGERPRINT,modem_sbp_config[11].SBP_FINGERPRINT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]This feature enables UE to configure Fingerprint feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5914,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_FLIGHT_MODE_CLEAR_NW_ENH_DET_CNT,modem_sbp_config[91].SBP_FLIGHT_MODE_CLEAR_NW_ENH_DET_CNT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureClear network detach enhance count upon flight modebit 0:0:Don't clear counterbit 1:1:Clear counter",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Clear NW detach enhancement restrict counter upon flight mode toggle<BR>0:Don't clear NW detach enhancement restrict counter upon flight mode toggle,,,__ENABLE_FLIGHT_MODE_CLEAR_NW_ENH_DET_CNT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5915,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_FORBIDDEN_HPLMN,modem_sbp_config[35].SBP_FORBIDDEN_HPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCT HPLMN forbidden in 5M project.bit 0:0:Turn-off. Do not support this featurebit 1:1:Turn-on. If CT USIM is inserted and UE does not support C2K, UE would not attach to HPLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5916,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_FORCE_FULLBAND_FOR_LTE_SR_REJECT_15,modem_sbp_config[63].SBP_FORCE_FULLBAND_FOR_LTE_SR_REJECT_15,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureForce fullband search other cells of the current PLMN/RAT after SR reject #15 on LTEbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5917,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_FORCE_LU_FOR_SPECIAL_NW_EMM_DETACH,modem_sbp_config[24].SBP_FORCE_LU_FOR_SPECIAL_NW_EMM_DETACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureFORCE_LU_FOR_SPECIAL_NW_EMM_DETACHbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will always perform LU when UE comes back to 2/3G after EMM detach<BR>0:Disabled. UE will not perform LU when UE comes back to 2/3G after EMM detach,,,__FORCE_LU_SPECIAL_NW_EMM_DETACH__,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-5918,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_FORCE_RELEASE_FOR_CONN_OOS_MANUAL_LIST,modem_sbp_config[39].SBP_FORCE_RELEASE_FOR_CONN_OOS_MANUAL_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo accelerate manual PLMN list by releasing RRC connection during connected OOS state.bit 0:0:Disable. Perform manual PLMN list after leaving connected OOS state.bit 1:1:Enable. Perform manual PLMN list by switching UE to RRC-IDLE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5919,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST,modem_sbp_config[27].SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSome operator request UE to transfer PCO directly in initial attach PDN connectivity request, instead of in ESM information procedure. Therefore, by enabling SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST, UE will compose and transfer PCO directly in initial attach PDN connectivity request.bit 0:0:Disable: PCO will be transfered using ESM informaton procedurebit 1:1:Enable: PCO will be composed and transfered directly in initial attach PDN connectivity request to network",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>Use VZW APN<BR>[Test Step] <BR>UE initial attach PDN connectivity request to network<BR>[Expected Result]<BR>UE to transfer PCO directly in initial attach PDN connectivity request, instead of in ESM information procedure.",Pass,,,,
-5920,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_FORCE_VOICE_GATING_ENABLE,modem_sbp_config[52].SBP_FORCE_VOICE_GATING_ENABLE,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. The feature of c2k voice GATing.<BR>bit 0:Not enabled ;bit 1:Enabled",BIT,1,,1,"bit: 0,1",NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,"For 1XRTT , the Force Voice Gating Feature Enable or Disable",1xRTT,3G,,,Test in Machine or Filed with Real C2K SIM<BR>1) Do Voice Call with silence in MO Call,Pass,,,,
-5921,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_FULLBAND_RAT_ORDER_ON_CUSTOM_SETTING,modem_sbp_config[20].SBP_FULLBAND_RAT_ORDER_ON_CUSTOM_SETTING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDefine roaming RAT order for customized requirements.bit 0:0:Disabled. Not use custom setting for roaming RAT orderbit 1:1:Enabled. Use custom setting for roaming RAT order",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5922,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_GAS_AVOID_SI_TIMER_EXPIRY_IN_DEDICATED_MODE,modem_sbp_config[77].SBP_GAS_AVOID_SI_TIMER_EXPIRY_IN_DEDICATED_MODE,OTA and OTA BY OP,no,no,no,yes,GSM RRM will ignore serving cell SI timer expiry in GSM dedicated mode. RRM will re-use the existing set of SI's when moving back to Idle mode.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:IgnoreSI timer expiry in dedicated mode<BR>0:Handle SI timer expiry in dedicated mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5923,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_GAS_DEDI_NEIGHBOR_REPORT_DECREASE,modem_sbp_config[95].SBP_GAS_DEDI_NEIGHBOR_REPORT_DECREASE,OTA and OTA BY OP,no,no,no,yes,"In dedicate mode, when serving cell is good enough, reduce rssi of neighbor cell whose snr is bad in measurement report"><BR>This feature provide optimization for handover.<BR>In dedicate mode, MS will avoid to handover to a cell whose quality is bad.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. MS will send measurement report of neighbo<BR>0:Disable. MS will send normal measurement report.VALUE>,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5924,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_GAS_ECC_CELL_SEL_ENHANCEMENT,modem_sbp_config[90].SBP_GAS_ECC_CELL_SEL_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,GAS cell selection enhancement for Emergency call triggered cell. GAS will skip the cell on which DUT is not allowed to trigger ECC due to access control restrictions.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS will skip the cell on which DUT is not allowed to trigger ECC due to access control restrictions.<BR>0:GAS does not check for access control restrictions.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5925,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GAS_ECSFB_FOR_PLMN_SEARCH,modem_sbp_config[100].SBP_GAS_ECSFB_FOR_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,Include eCSFB optimisation when PLMN SEARCH is triggerd due to csfb MO/MT call.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Include ecsfb optimisation<BR>0:Follow old design, No ecsfb optimisation",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5926,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_GAS_FDD_ENABLE_ADV_SNIFFER,modem_sbp_config[87].SBP_GAS_FDD_ENABLE_ADV_SNIFFER,OTA and OTA BY OP,no,no,no,yes,When this SBP is set GAS will use Stored cells based on the PLMN information provided in Sniffer request for Fast recovery.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will consider list of PLMNs in sniffer start request.<BR>0:GSM will not consider list of PLMNs in sniffer start request.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5927,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_GAS_IGNORE_SIM_STORED_LIST,modem_sbp_config[69].SBP_GAS_IGNORE_SIM_STORED_LIST,OTA and OTA BY OP,no,no,no,yes,"GSM will ignore the BA list from SIM.<BR>During power ON, UE camps on GSM instead of LTE as SIM contains 2G BA list.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will ignore BA list from the SIM card.<BR>0:GSM will use BA list from the SIM card.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5928,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_GAS_IMPROVE_LTE_RESELECTION,modem_sbp_config[75].SBP_GAS_IMPROVE_LTE_RESELECTION,OTA and OTA BY OP,no,no,no,yes,"Sometimes in LIVE NW, UE is not able to reselect to LTE RAT timely because of following reasons<BR>- UE reselect to 3G RAT before LTE as 3G cells are configured and measured first based on it is recevied from SI2quater OR<BR>- NW has given strict criteria for LTE cell Reselection<BR><BR>To overcome this situation, MTK has provided this SBP so that UE can do faster LTE Cell Reselection by penlize 3G cell Reselection time or rewarding LTE RSRP criteria<BR>Configurable value to penlize 3G T_Reselection is defined in custom_gas_config.c, Parameter - gas_custom_umts_cell_resel_penalty_time<BR>Configurable value to reward s_non_serving_eutran is defined in custom_gas_config.c, Parameter - gas_custom_lte_rsrp_reward_threshold<BR>If this SBP is enabled then UE is not following the NW configuration thus it is not in accordance with 3GPP. So by default this SBP value is FALSE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Relax 3GPP criteria, for 2G to 4G Cell Reselection<BR>0:Follow the 3GPP criteria, for 2G to 4G Cell Reselection",,,__IMPROVE_2G_TO_LTE_CELLRESEL__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5929,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_GAS_MULTIPLE_FREQUENCY_BAND_INDICATOR,modem_sbp_config[14].SBP_GAS_MULTIPLE_FREQUENCY_BAND_INDICATOR,OTA and OTA BY OP,no,no,no,yes,"This SBP item controls 4G neighbor cell list in System Information 2 Quarter and Measurement Information. If there are different EARFCNs with the same physical frequency existed in neighbor cell list, then UE will ignore the lower EARFCN from neighbor cell list.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled - UE should ignore the lower EARFCN when different EARFCN existed with same Physical frequency<BR>0:Not Enabled - UE should not ignore the lower EARFCN when different EARFCN existed with same Physical frequency,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5930,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_GAS_REDIRECT_USE_STORED_LIST,modem_sbp_config[67].SBP_GAS_REDIRECT_USE_STORED_LIST,OTA and OTA BY OP,no,no,no,yes,"For CSFB from LTE to GSM , RRM will include the Stored GSM List along with redirection list cells for the search.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will use Stored List along with redirection list.<BR>0:GSM will follow 3GPP and use only redirection list provided by the network.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5931,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_GAS_RESELECTION_SPEED_MODE,modem_sbp_config[13].SBP_GAS_RESELECTION_SPEED_MODE,OTA and OTA BY OP,no,no,no,yes,"Enables 3G/4G priority measurement results in GAS every 5 seconds rather than 25s/70s"><BR>This SBP item controls 2G3/2G4 inter-RAT reselection speed. If this SBP is supported, 3G/4G measurement results will be available every 5 seconds.<BR> (3GPP Spec. 45.008 requirement for priority reselection is 25s/70s.)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:it means UE doesn't support 3G/4G priority measure<BR>1:it means UE supports 3G/4G priority measurement results in 5 s,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5932,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_GAS_REUSE_POWER_SCAN_RESULTS,modem_sbp_config[86].SBP_GAS_REUSE_POWER_SCAN_RESULTS,OTA and OTA BY OP,no,no,no,yes,GSM will avoid filtering out the previously camped cell due to interference handling.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will use the rssi scan results from the previous band scans.<BR>0:GSM will not use the rssi scan results from the previous band scans.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5933,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_GAS_SMART_SCAN,modem_sbp_config[17].SBP_GAS_SMART_SCAN,OTA,no,no,no,yes,This SBP enables MTK algorithm to filter out GSM interference ARFCNs in a smart way.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will apply this algorithm for interferance handling.<BR>0:GSM will not apply this algorithm for interferance handling.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5934,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_GAS_SMART_SCAN_ENH,modem_sbp_config[81].SBP_GAS_SMART_SCAN_ENH,OTA and OTA BY OP,no,no,no,yes,UE will avoid filtering out previously camped on GSM cell during interference handling.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will not filter-out previously camped on GSM cell during interface handling.<BR>0:GSM will uniformly apply interface handling on all GSM cells.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5935,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_GAS_USE_ACQUIRED_PLMN_CELL_INFO_FOR_SEARCH,modem_sbp_config[86].SBP_GAS_USE_ACQUIRED_PLMN_CELL_INFO_FOR_SEARCH,OTA and OTA BY OP,no,no,no,yes,GAS will use previously acquired PLMN cell info for PLMN Search. ARFCNs belonging to Target PLMN will be searched first.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS will use previously acquired PLMN cell info for PLMN Search.<BR>0:GAS will not use previously acquired PLMN cell info for PLMN Search.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5898,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_ERRC_PS_CALL_PROTECTION_FROM_MT_PAGING,modem_sbp_config[73].SBP_ERRC_PS_CALL_PROTECTION_FROM_MT_PAGING,OTA and OTA BY OP,no,no,no,yes,"If enabled, UE will perform 500ms channel protection for MT PS call(non-data SIM). It is to prevent rach procedure being interrupted by the other SIM, in order to increase MT call hit rate.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test by MT paging,Pass,,,,
+5899,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_ETWS_FOR_AOSP_DESIGN,modem_sbp_config[102].SBP_ETWS_FOR_AOSP_DESIGN,OTA and OTA BY OP,no,no,no,yes,"For SB operator the ETWS APP of the SB will be active. SB ETWS APP is based on the AOSP design and accepts in the input in the +CBM format for ETWS messages as well.<BR>But other devices use the MTK ETWS APP and will need the proprietary ETWS format. So this SBP controls the format of ETWS URC.<BR>Proprietary ETWS format is +ETWS: warning type,message ID,serial number, PLMN_ID<BR>AOSP ETWS format is +CBM: length_of_PDU|CR|LF|ETWS_PDU",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This SBP can be controlled by compile option __SBP_ETWS_FOR_AOSP_DESIGN__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5900,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_EUTRAN_CAPABILITY_ADJUSTMENT_FOR_VIRTUAL_SIM,modem_sbp_config[85].SBP_EUTRAN_CAPABILITY_ADJUSTMENT_FOR_VIRTUAL_SIM,OTA and OTA BY OP,no,no,no,yes,"Generally, for voice-centric device, under some scenarios, DUT will follow Spec 24.301/23.122 to disable LTE and search UMTS/GSM. For virtual SIM, someone may consider it is usually for data service and hope device with virtual SIM can stay on LTE as far as possible. This SBP is to let device with virtual SIM still enable EUTRAN even though DUT is voice centric and voice service is not available. Only when the virtual SIM voice and data service are both unavailable in the LTE network, DUT will disable LTE and search UMTS/GSM. Please note that it will violate the Spec 24.301/23.122 requirements related to disabling EUTRAN capability.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is enabled by __EUTRAN_CAPABILITY_ADJUSTMENT_FOR_VIRTUAL_SIM__ .,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5901,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_EUTRAN_OOS_RESET_CELL_INFO_AND_PS_UNREG,modem_sbp_config[61].SBP_EUTRAN_OOS_RESET_CELL_INFO_AND_PS_UNREG,Not Support,no,no,no,yes,"When RAC receive detach ind with cause EMM_CAUSE_OOS_IND, will reset plmn id, la code and CA support info. And then RAC will update PS REG_STATE_NOT_REGISTERED to upper layer if rac_emm_state is RAC_EMM_REG_LIMITED. RAC_EMM_REG_LIMITED is for the following three cases: <BR>- combined attach but PS attach success only<BR>- already attach on CS and PS domain, need IMSI detach only <BR>- TAU cause#22 congestion control",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"if compile option __EUTRAN_OOS_RESET_CELL_INFO_AND_PS_UNREG__ is defined, the SBP is enabled",,,,,,Untested,,,,
+5902,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_EXTENDED_PCO_SUPPORT,modem_sbp_config[87].SBP_EXTENDED_PCO_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, ePCO will be set if N1 mode capable UE. if the SBP is disabled, the ePCO will not be set anyway even if the UE is N1 mode capable UE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1: Enabled: Enabled:UE Will set ePCO bit in ue network capability IE when the n1 mode is supported by TS 24.301 CR#3006.<BR>0: Disabled:UE Will Not set ePCO bit in ue network capability IE even though the n1 mode is supported.,,,This SBP item is controlled (enabled) by the compile flag __DISABLE_EXTENDED_PCO_SUPPORT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5903,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_EXTEND_IMS_STATUS_UNSPECIFIED_WHEN_CAUSE18,modem_sbp_config[56].SBP_EXTEND_IMS_STATUS_UNSPECIFIED_WHEN_CAUSE18,OTA and OTA BY OP,no,no,no,yes,"According to 3GPP spec. 24.301, UE will change UE mode to EPS only when entering cause#18 PLMN. At that time, UE may receive attach reject or detach with EMM cause#18 (CS domain not available). Once IMS registration was unregistered, UE should disable EUTRAN and try to search 2/3G for protecting CS voice capability.<BR>In order to improve possibility UE can stay on LTE, UE may not disable EUTRAN immediately when entering cause#18 PLMN if IMS not registered. If this SBP was enabled, IMS registration status will be extended to unspecified again within IMS guard timer (default 64s) when entering cause#18 PLMN. Otherwise, UE disable EUTRAN immediately because IMS registration status was already unregistered.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __EXTEND_IMS_STATUS_UNSPECIFIED_WHEN_CAUSE18__ in makefile.,IMS,IMS,,,,Pass,,,,
+5904,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_EXTEND_LTE_PAGING_CYCLE_IN_VIRTUAL,modem_sbp_config[98].SBP_EXTEND_LTE_PAGING_CYCLE_IN_VIRTUAL,OTA and OTA BY OP,no,no,no,yes,"This feature is used to extend LTE paging cycle when other SIM is doing PS transfer.<BR>When this SBP is enabled, user can inject AT command to extend paging cycle.<BR>AT command format is: AT+EGCMD=318,1,"0X" (X:0=>disable, 1=>320ms, 2=>640ms, 3=>1280ms, 4=>2560ms) <BR>When these conditions are satisfied, UE would apply new paging cycle: (1) this SIM is in virtual mode (that is, other SIM is doing PS transfer) (2) new paging cycle is larger than paging cycle indicated by SPEC.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:user can extend LTE paging cycle by AT command.<BR>0:user cannot extend LTE paging cycle.,,,This feature is controlled by __SBP_EXTEND_LTE_PAGING_CYCLE_IN_VIRTUAL__.,L+L,Multiple SIM,,,,Pass,,,,
+5905,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_EXTRA_FILE_SELECTION_AFTER_SAT_COMMAND,modem_sbp_config[24].SBP_EXTRA_FILE_SELECTION_AFTER_SAT_COMMAND,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+5906,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_FAST_HO_FOR_SPECIAL_SCENARIO,modem_sbp_config[67].SBP_FAST_HO_FOR_SPECIAL_SCENARIO,OTA and OTA BY OP,no,no,no,yes,"This feature is to trigger UE the fast handover to another cell, to avoid the call drop under the special scenario that UE is in the 2G poor environment and on the serving cell UE encounter the strong interference during the call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,Feature could be enabled by enabling compiler option __FAST_HO_FOR_SPECIAL_SCENARIO__.,,,,,,Untested,,,,
+5907,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_FAST_HPPLMN_SEARCH,modem_sbp_config[20].SBP_FAST_HPPLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"When UE registers on a VPLMN, UE would immediately perform a fast PLMN list once for highest priority PLMN. If the highest priority PLMN is found in fast PLMN list, UE will trigger the higher priority PLMN search.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,This feature is controlled by __SEARCH_AVAILABLE_PLMN_IMMEDIATELY__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5908,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_FAST_MCC_JUDGEMENT,modem_sbp_config[74].SBP_FAST_MCC_JUDGEMENT,OTA and OTA BY OP,no,no,no,yes,"In multi-mode system selection process for C2K SIM, UE has to locate current MCC first to decide the PLMN search algorithm for this country. This MCC judge procedure make take up to 5 seconds depend on network signal quality, which would introduce additonal latency in UE's registration. When this SBP is enabled, UE would check stored MCC and directly apply the corresponding PLMN search algorithm, so the MCC judge latency can be eliminated.<BR>IMPORTANT NOTICE: Stored MCC information may not always be correct at the border of countries. If UE applies wrong PLMN search algorithm due to incorrect stored MCC, the registration latency would become enormously large.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,"if compile option __DISABLE_FAST_MCC_JUDGEMENT__ is defined, the SBP is disabled",MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+5909,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_FAST_RECOVERY_IN_VIRTUAL_MODE,modem_sbp_config[80].SBP_FAST_RECOVERY_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"Originally in virtual mode, it is not allowed to do Fast Recovery. This SBP is set to control the functionality that Fast Recovery will be allowed in virtual mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:2G will perform Fast Recovery in Virtual Mode.<BR>0:Follow old design, 2G will not perform Fast Recovery in Virtual Mode.",,,Feature require compile option __GEMINI_MONITOR_PAGE_DURING_TRANSFER__ to be defined.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5910,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_FAST_ROAMING_SEARCH,modem_sbp_config[19].SBP_FAST_ROAMING_SEARCH,OTA and OTA BY OP,no,no,no,yes,"This feature is for performance optimization of auto mode roaming search. It divides search procedure into two major phases, stored_only and fullband search. Reduce lots of time to get normal service for most cases.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5911,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_FAST_SCAN_STORED_LIST_SUPPORT,modem_sbp_config[9].SBP_FAST_SCAN_STORED_LIST_SUPPORT,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+5912,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_FDD_ECSFB_AVOID_LU_FAIL_CELLS,modem_sbp_config[76].SBP_FDD_ECSFB_AVOID_LU_FAIL_CELLS,OTA and OTA BY OP,no,no,no,yes,"This feature provide optimization for ECSFB feature. During CSFB from LTE, RRM will avoid selection to cells on which previously CSFB failed due to LU attempt failure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will avoid selection to LU failure cells.<BR>0:GSM will follow normal eCSFB design.,,,Feature require compile option __ECSFB__ to be defined and SBP_ECSFB to be enabled.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5913,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_FINGERPRINT,modem_sbp_config[11].SBP_FINGERPRINT,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5914,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_FLIGHT_MODE_CLEAR_NW_ENH_DET_CNT,modem_sbp_config[91].SBP_FLIGHT_MODE_CLEAR_NW_ENH_DET_CNT,OTA and OTA BY OP,no,no,no,yes,"For SBP_REATTACH_AFTER_MT_DETACH_ABNORMAL_B and SBP_DETACH_7_8_MAPPING_TO_REATTACH_REQUIRED, there is a counter to restrict the attempting times of these 2 NW detach enhancement. From user's viewpoint,<BR>they may expect flight mode toggle as a way to restart modem behavior. Hence, here provides a feature switch for whether reset this NW detach enhancement restrict counter upon flight mode toggle.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Clear NW detach enhancement restrict counter upon flight mode toggle<BR>0:Don't clear NW detach enhancement restrict counter upon flight mode toggle,,,User could use compile option __ENABLE_FLIGHT_MODE_CLEAR_NW_ENH_DET_CNT__ to enable this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5915,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_FORBIDDEN_HPLMN,modem_sbp_config[35].SBP_FORBIDDEN_HPLMN,OTA and OTA BY OP,no,no,no,yes,"According to China Telecom requirement, for 5M project, i.e. not support C2K, UE should not attach to HPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __FORBIDDEN_HPLMN__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5916,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_FORCE_FULLBAND_FOR_LTE_SR_REJECT_15,modem_sbp_config[63].SBP_FORCE_FULLBAND_FOR_LTE_SR_REJECT_15,OTA and OTA BY OP,no,no,no,yes,"If this SBP is off, UE will perform stored only search on current PLMN/RAT after SR reject #15 on LTE. <BR>If this SBP is on, UE will perform fullband search on current PLMN/RAT after SR reject #15 on LTE. UE may find the cell which is not in the stored frequency, but the performance may be degraded.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"This SBP only works when SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE is off.if compile option __FORCE_FULLBAND_FOR_LTE_SR_REJECT_15__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5917,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_FORCE_LU_FOR_SPECIAL_NW_EMM_DETACH,modem_sbp_config[24].SBP_FORCE_LU_FOR_SPECIAL_NW_EMM_DETACH,OTA and OTA BY OP,no,no,no,yes,"When EMM detach after coming back to 2/3G UE still perform LU<BR>This is SOFTBANK REQUIREMENT When EMM detach with cause EMM_CAUSE_NW_FAILURE and detach type MT_REATTACH_NOT_REQUIRED, After coming back to 23G on same register LAI still perform LU",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will always perform LU when UE comes back to 2/3G after EMM detach<BR>0:Disabled. UE will not perform LU when UE comes back to 2/3G after EMM detach,,,"To enable this feature, compile option __FORCE_LU_FOR_SPECIAL_NW_EMM_DETACH__ must be defined",MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+5918,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_FORCE_RELEASE_FOR_CONN_OOS_MANUAL_LIST,modem_sbp_config[39].SBP_FORCE_RELEASE_FOR_CONN_OOS_MANUAL_LIST,OTA and OTA BY OP,no,no,no,yes,"In order to accelerate the process of manual PLMN list during connected oos state, this feature allows UE to immediately perform manual PLMN list by forcing UE move into RRC-IDLE state.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5919,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST,modem_sbp_config[27].SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST,OTA and OTA BY OP,no,no,no,yes,"If APN and PCO are provieded, UE will transfered both of them by ESM information procedure as TS24.301 6.5.1.2 illustrated. Some operator request UE to transfer PCO directly in initial attach PDN connectivity request, instead of in ESM information procedure. Therefore, by enabling SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST, UE will compose and transfer PCO directly in initial attach PDN connectivity request. Note that APN will still be transfered using ESM information procedure and this SBP will only works on VZW network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,"if enablng compile option __SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST__, SBP_FORCE_SET_PCO_IN_LTE_ATTACH_PDN_REQUEST will be turned on also.",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>Use VZW APN<BR>[Test Step] <BR>UE initial attach PDN connectivity request to network<BR>[Expected Result]<BR>UE to transfer PCO directly in initial attach PDN connectivity request, instead of in ESM information procedure.",Pass,,,,
+5920,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_FORCE_VOICE_GATING_ENABLE,modem_sbp_config[52].SBP_FORCE_VOICE_GATING_ENABLE,OTA BY OP,no,no,no,yes,This SBP describes the feature of c2k voice GATing.,BIT,1,,1,"bit: 0,1",NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,N/A,1xRTT,3G,,,Test in Machine or Filed with Real C2K SIM<BR>1) Do Voice Call with silence in MO Call,Pass,,,,
+5921,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_FULLBAND_RAT_ORDER_ON_CUSTOM_SETTING,modem_sbp_config[20].SBP_FULLBAND_RAT_ORDER_ON_CUSTOM_SETTING,OTA and OTA BY OP,no,no,no,yes,Define roaming RAT order for customized requirements. Default setting is to prefer 3G over 4G.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __FULLBAND_RAT_ORDER_ON_CUSTOM_SETTING__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5922,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_GAS_AVOID_SI_TIMER_EXPIRY_IN_DEDICATED_MODE,modem_sbp_config[77].SBP_GAS_AVOID_SI_TIMER_EXPIRY_IN_DEDICATED_MODE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:IgnoreSI timer expiry in dedicated mode<BR>0:Handle SI timer expiry in dedicated mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5923,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_GAS_DEDI_NEIGHBOR_REPORT_DECREASE,modem_sbp_config[95].SBP_GAS_DEDI_NEIGHBOR_REPORT_DECREASE,OTA and OTA BY OP,no,no,no,yes,"This feature provide optimization for handover. In dedicate mode, when serving cell is good enough, reduce rssi of neighbor cell whose snr is bad in measurement report, MS will avoid to handover to a cell whose quality is bad.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. MS will send measurement report of neighbo<BR>0:Disable. MS will send normal measurement report.VALUE>,,,Feature require compile option __DEDICATE_NBR_MEASUREMENT_REPORT_RSSI_DECREASE__ to be defined and SBP will be enabled.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5924,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_GAS_ECC_CELL_SEL_ENHANCEMENT,modem_sbp_config[90].SBP_GAS_ECC_CELL_SEL_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"If ANY PLMN search is triggered while DUT attemping ECC call, GAS will skip the cell on which <BR>DUT is not allowed to trigger ECC due to access control restrictions.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS will skip the cell on which DUT is not allowed to trigger ECC due to access control restrictions.<BR>0:GAS does not check for access control restrictions.,,,This feature can be enabled by __GAS_ECC_CELL_SEL_ENHANCEMENT__ flag,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5925,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GAS_ECSFB_FOR_PLMN_SEARCH,modem_sbp_config[100].SBP_GAS_ECSFB_FOR_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,PLMN search scenario in eCSFB feature.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Include ecsfb optimisation<BR>0:Follow old design, No ecsfb optimisation",,,"To disable this feature, compile option __DISABLE_ECSFB_FOR_PLMN_SEARCH__ must be defined.",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5926,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_GAS_FDD_ENABLE_ADV_SNIFFER,modem_sbp_config[87].SBP_GAS_FDD_ENABLE_ADV_SNIFFER,OTA and OTA BY OP,no,no,no,yes,When this SBP is set GAS will use Stored cells Based on the PLMN info provided in Sniffer Start Req for Fast Recovery.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will consider list of PLMNs in sniffer start request.<BR>0:GSM will not consider list of PLMNs in sniffer start request.,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5927,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_GAS_IGNORE_SIM_STORED_LIST,modem_sbp_config[69].SBP_GAS_IGNORE_SIM_STORED_LIST,OTA and OTA BY OP,no,no,no,yes,"While power ON search,sometimes modem fails to camp on LTE and instead camps on 2G. This occurs if SIM card having stored BA List, causing GSM stored list search to be success. <BR>When this Feature is enabled RRM will not be using the BA list for the SIM card.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will ignore BA list from the SIM card.<BR>0:GSM will use BA list from the SIM card.,,,Feature could be enabled by enabling compiler option __GAS_IGNORE_SIM_STORED_LIST__.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5928,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_GAS_IMPROVE_LTE_RESELECTION,modem_sbp_config[75].SBP_GAS_IMPROVE_LTE_RESELECTION,OTA and OTA BY OP,no,no,no,yes,"Sometimes in LIVE NW, UE is not able to reselect to LTE RAT timely because of following reasons<BR>- UE reselect to 3G RAT before LTE as 3G cells are configured and measured first based on it is recevied from SI2quater OR<BR>- NW has given strict criteria for LTE cell Reselection<BR><BR>To overcome this situation, MTK has provided this SBP so that UE can do faster LTE Cell Reselection by penlize 3G cell Reselection time or rewarding LTE RSRP criteria<BR>Configurable value to penlize 3G T_Reselection is defined in custom_gas_config.c, Parameter - gas_custom_umts_cell_resel_penalty_time<BR>Configurable value to reward s_non_serving_eutran is defined in custom_gas_config.c, Parameter - gas_custom_lte_rsrp_reward_threshold<BR>If this SBP is enabled then UE is not following the NW configuration thus it is not in accordance with 3GPP. So by default this SBP value is FALSE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Relax 3GPP criteria, for 2G to 4G Cell Reselection<BR>0:Follow the 3GPP criteria, for 2G to 4G Cell Reselection",,,"Default value depends on compilation flag, __IMPROVE_2G_TO_LTE_CELLRESEL__, if this flag is define, then default value 1 otherwise 0",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5929,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_GAS_MULTIPLE_FREQUENCY_BAND_INDICATOR,modem_sbp_config[14].SBP_GAS_MULTIPLE_FREQUENCY_BAND_INDICATOR,OTA and OTA BY OP,no,no,no,yes,"This SBP item controls 4G neighbor cell list in System Information 2 Quarter and Measurement Information. If there are different EARFCNs with the same physical frequency existed in neighbor cell list, then UE will ignore the lower EARFCN from neighbor cell list.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled - UE should ignore the lower EARFCN when different EARFCN existed with same Physical frequency<BR>0:Not Enabled - UE should not ignore the lower EARFCN when different EARFCN existed with same Physical frequency,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5930,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_GAS_REDIRECT_USE_STORED_LIST,modem_sbp_config[67].SBP_GAS_REDIRECT_USE_STORED_LIST,OTA and OTA BY OP,no,no,no,yes,"As per Standard, While searching for GSM cell during 4G to 2G MO/MT CSFB, RRM need to use the redirection list provided by the netwrok. Sometime the redirection list provided by network does not contain the best avaialble cell at test location.This cause MO/MT call drops in GSM or Handovers during the call.<BR>This feature allows RR to include list of stored cells along with redirection list to find best GSM cell.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will use Stored List along with redirection list.<BR>0:GSM will follow 3GPP and use only redirection list provided by the network.,,,Feature can be turned OFF by compile option __DISABLE_STORED_LIST_FOR_4G2G_CSFB__.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5931,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_GAS_RESELECTION_SPEED_MODE,modem_sbp_config[13].SBP_GAS_RESELECTION_SPEED_MODE,OTA and OTA BY OP,no,no,no,yes,"This SBP item controls 2G3/2G4 inter-RAT reselection speed. If this SBP is supported, 3G/4G measurement results will be available every 5 seconds. (3GPP Spec. 45.008 requirement for priority reselection is 25s/70s.)<BR>When this SBP's value is 1, it means UE supports 3G/4G priority measurement results in 5 seconds. When this SBP's value is 0, it means UE doesn't support 3G/4G priority measurement results in 5 seconds",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:it means UE doesn't support 3G/4G priority measure<BR>1:it means UE supports 3G/4G priority measurement results in 5 s,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5932,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_GAS_REUSE_POWER_SCAN_RESULTS,modem_sbp_config[86].SBP_GAS_REUSE_POWER_SCAN_RESULTS,OTA and OTA BY OP,no,no,no,yes,"When this feature is enabled, UE will avoid filtering out of previously camped on GSM cell during interferance handling.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will use the rssi scan results from the previous band scans.<BR>0:GSM will not use the rssi scan results from the previous band scans.,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5933,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_GAS_SMART_SCAN,modem_sbp_config[17].SBP_GAS_SMART_SCAN,OTA,no,no,no,yes,"According to 3GPP TS43.022, the UE is able to search 40 ARFCNs of each GSM band to find a suitable cell.<BR>However, the regulation is not applicable in some high interferance environments.<BR>When this feature is enabled, the UE will search GSM ARFCNs in a smart way to find more suitable GSM cells.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will apply this algorithm for interferance handling.<BR>0:GSM will not apply this algorithm for interferance handling.,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5934,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_GAS_SMART_SCAN_ENH,modem_sbp_config[81].SBP_GAS_SMART_SCAN_ENH,OTA and OTA BY OP,no,no,no,yes,"When this feature is enabled, UE will avoid filtering out of previously camped on GSM cell during interferance handling.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GSM will not filter-out previously camped on GSM cell during interface handling.<BR>0:GSM will uniformly apply interface handling on all GSM cells.,,,Feature require compile option __GAS_STORED_SI_FEAT__ to be defined. and SBP_GAS_SMART_SCAN should be ON.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5935,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_GAS_USE_ACQUIRED_PLMN_CELL_INFO_FOR_SEARCH,modem_sbp_config[86].SBP_GAS_USE_ACQUIRED_PLMN_CELL_INFO_FOR_SEARCH,OTA and OTA BY OP,no,no,no,yes,GAS will use previosly acquired PLMN cell info for PLMN Search.<BR>ARFCNs belonging to Target PLMN will be searched first.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS will use previously acquired PLMN cell info for PLMN Search.<BR>0:GAS will not use previously acquired PLMN cell info for PLMN Search.,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
5936,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_GAS_WIDEBAND_SIGNAL_DETECTION_IN_IDLE,modem_sbp_config[81].SBP_GAS_WIDEBAND_SIGNAL_DETECTION_IN_IDLE,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, GAS will detect wideband signal if BSIC of neighbor ARFCN fails consecutive 3 times. in such case, it increase the BSIC reading duration from 30s to 180s for that ARFCN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:GAS will not use wideband detection in idle mode<BR>1:GAS will start to use wideband detection in idle mode,,,__GAS_WIDEBAND_SIGNAL_DETECTION_IN_IDLE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5937,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_GEMINI_LG_WG_MODE,modem_sbp_config[40].SBP_GEMINI_LG_WG_MODE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureFor CMCC+CU SIM combination, choose LG+WG instead of LTG+Gbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5938,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE,modem_sbp_config[36].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRe-attach on NW detach for other causesbit 0:0:Do not reattach for nw detach other cause bit 1:1:GMM reattach for nw detach other cause",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:UE shall not re-attach immediately after performing Network Initiated GPRS detach(for causes other than m<BR>1:If this feature is enabled, On NW initiated PS detach for causes other than #2,8,3,6,7,11,12,13,14,15,25, UE shall perform PS re-attach immediately.",,,__GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5939,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_GMM_TMSI_BASED_NRI_CONTAINER,modem_sbp_config[16].SBP_GMM_TMSI_BASED_NRI_CONTAINER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureGMM_TMSI_BASED_NRI_CONTAINERbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If this SBP is disable, UE does not contain TMSI based NRI container in combined ATTACH.RAU peer message.<BR>1:If this SBP is enable, UE contains TMSI based NRI container in combined ATTACH/RAU peer message .",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-5940,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_GMSS_EARLY_CONTROL_LIMITED_SEARCH,modem_sbp_config[61].SBP_GMSS_EARLY_CONTROL_LIMITED_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureGMSS EARLY CONTROL LIMITED SEARCHbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-5941,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_GMSS_REUSE_3GPP_RPLMN_MCC,modem_sbp_config[32].SBP_GMSS_REUSE_3GPP_RPLMN_MCC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLYA.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5942,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_GMSS_SPRINT_HANDLING,modem_sbp_config[73].SBP_GMSS_SPRINT_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable Sprint handling in GMSS module logicbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-5943,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_BDS,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_BDS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable/Disable UE reports GNSS capability BDS to NWbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5944,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GALILEO,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GALILEO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable/Disable UE reports GNSS capability Galileo to NWbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5945,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GLONASS,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GLONASS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable/Disable UE reports GNSS capability GLONASS to NWbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5946,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GPS_DUAL_FREQ,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GPS_DUAL_FREQ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable/Disable UE reports GNSS capability GPS dual-frequency to NWbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5947,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_GSMA_NETWORK_ACCESS_CONTROL,modem_sbp_config[11].SBP_GSMA_NETWORK_ACCESS_CONTROL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureGSMA network access control with reject cause #13 and #15.bit 0:0:Turn-off. Not apply this GSMA new requirementbit 1:1:Turn-on. Apply this GSMA new requirement",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5948,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_GSM_NO_SI13_CAMP_ON_CS_ONLY,modem_sbp_config[69].SBP_GSM_NO_SI13_CAMP_ON_CS_ONLY,Not Support,no,no,no,yes,Configuration of SBP FeatureEnable GSM cell no SI13 camp on CS onlybit 0:0:Not Supportedbit 1:1:Supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-5949,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_HPLMN_REJ_CAUSE_7_8_MAPPING_TO_15,modem_sbp_config[56].SBP_HPLMN_REJ_CAUSE_7_8_MAPPING_TO_15,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReject cause #7/#8 mapping to reject cause #15 in HPLMNbit 0:0:Disable. Follow spec #7/#8 handlingbit 1:1:Enabled. Reject cause mapping #7 or #8 to #15 and follow #15 handling in Home PLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Reject cause mapping #7 or #8 to #15 and follow #15 handling in roaming PLMN.<BR>0:Disable. Follow spec #7/#8 handling.,,,__LTE_REJ_7_8_MAPPING_TO_15__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5950,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_HPPLMN_REGARDLESS_ANY_MCC,modem_sbp_config[2].SBP_HPPLMN_REGARDLESS_ANY_MCC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow UE to perform background search to higher priority PLMNs without MCC restriction.bit 0:0:Turn-off. Background search to HPPLMN with MCC restrictionbit 1:1:Turn-on. Background search to HPPLMN without MCC restriction",BIT,1,,1,DEFAULT_VALUE :0 <BR>__HPPLMN_REGARDLESS_ANY_MCC__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5951,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_HPUE,modem_sbp_config[41].SBP_HPUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureHigh Power UEbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,Power Class,HPUE,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5952,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_HSR_ENHANCE,modem_sbp_config[32].SBP_HSR_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureHigh Speed Rail enhancementbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enabled,,,NO,High Speed Train (HST),MTK Proprietary,,,"Test in machine (Y/N): N<BR>Test Time (minutes): Could be more than 1 hour<BR>[Init]<BR>1. Go to China High Speed Train route<BR>2. Insert CMCC SIM card<BR>3. Use SBP default value<BR>4. Perform CMCC HST field trial test case<BR>[Test Step]<BR>1. Use MCF tool to turn on and off this switch<BR>2. Perform CMCC field trial High Speed Train (HST) test, dedicated network attachment period (ratio) test case.<BR>[Expected Result]<BR>1. When it's OFF, UE could fail to pass HST dedicated network attachment period (ratio) test.<BR>2. When it's ON, UE shall pass HST dedicated network attachment period (ratio) test.",Pass,,,,
-5953,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_HST_VOLTE_ENH,modem_sbp_config[62].SBP_HST_VOLTE_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureImprove VOLTE quality in High speed train scenariobit 0:0:UE does not apply VoLTE quality enhancement in High speed trainbit 1:1:UE apply VoLTE quality enhancement in High speed train",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE apply VoLTE quality enhancement in High speed train<BR>0:UE does not apply VoLTE quality enhancement in High speed train,,,,IMS,IMS,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5954,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_HVOLTE_ENABLE,modem_sbp_config[28].SBP_HVOLTE_ENABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable hVoLTEbit 0:0:Disable hVoLTEbit 1:1:Enable hVoLTE",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,(VzW) hVoLTE,OP Requirement,,,,Pass,,,,
-5955,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_IDC_IGNORE_BT_FOR_TEST_SIM,modem_sbp_config[66].SBP_IDC_IGNORE_BT_FOR_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not consider BT when evaluating IDC solutionbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,"MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[66] -> SBP_IDC_IGNORE_BT_FOR_TEST_SIM<BR><BR>PS Intergrate Trace => "[L1][IDC] isBypassBt(): sbp_config_ingore BT =%d, test sim flag =%d "<BR>=> (check: sbp_config_ingore BT )",Pass,,,,
-5956,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_IGNORE_4G_PWS_DUP_CHECK,modem_sbp_config[77].SBP_IGNORE_4G_PWS_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore 4G PWS duplication detection resultbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Disable, still check PWS duplication.<BR>1:Enable, not check PWS duplication detection.",,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5957,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_IGNORE_EFSMSP_PARAM_IND_FOR_SMSC,modem_sbp_config[66].SBP_IGNORE_EFSMSP_PARAM_IND_FOR_SMSC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore Parameter Indicator in EFsmsp for SMSCbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5958,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_IGNORE_INT_CHECK_FOR_NAS_MSG,modem_sbp_config[59].SBP_IGNORE_INT_CHECK_FOR_NAS_MSG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCheck NAS message again if integrity check failurebit 0:0:Disable. Discard NAS message if integrity check failurebit 1:1:Enabled. Check NAS message again if integrity check failure",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Check NAS message again if integrity check failure.<BR>0:Disable. Discard NAS message if integrity check failure.,,,__IGNORE_INT_CHECK_FOR_NAS_MSG__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5959,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_IGNORE_PLMN_CHANGE_FOR_MANUAL_MODE,modem_sbp_config[7].SBP_IGNORE_PLMN_CHANGE_FOR_MANUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore PLMN change for manual mode.bit 0:0:Turn-off. Do not ignore PLMN change for manual modebit 1:1:Turn-on. Ignore PLMN change for manual mode",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5960,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_IGNORE_RAI_WHEN_NW_NOT_INCLUDE_BOT,modem_sbp_config[58].SBP_IGNORE_RAI_WHEN_NW_NOT_INCLUDE_BOT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to always ignore Re-attempt indicator IE if NW does not include Back-off timer IEbit 0:0:UE decides not to ignore the Re-attempt indicator in some cases if the network does not include Back-off timer.bit 1:1:UE ignores the Re-attempt indicator in any cases if the network does not include Back-off timer.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-5961,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_IGNORE_REDIR_DEDI_GERAN,modem_sbp_config[89].SBP_IGNORE_REDIR_DEDI_GERAN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureignore redir and dedicated priority to GERANbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,,,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Receive release with redirection info for 2G<BR> [Expected Result]<BR>Ignore redirection,Pass,,,,
-5962,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_IMCSMS_RETRY_FOR_202_REV_OR_NOT,modem_sbp_config[32].SBP_IMCSMS_RETRY_FOR_202_REV_OR_NOT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-5963,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_IMEI_LOCK_SUPPORT,modem_sbp_config[4].SBP_IMEI_LOCK_SUPPORT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Support Verification of IMEI before camping on Networkbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-5964,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureImproved PDP activation/deactivation retry performancebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Improve PDP act and deact retry performance on full stack suspend and lower layer failures<BR>0:PDP act and deact retry performance shall not be applied on full stack suspend and lower layer failures,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 5 mins <BR>[Init] DUT boot up with dual SIM inserted and mobile data enabled.<BR>[Test Step] <BR>1) DUT register to PS services in 2G/3G<BR>2) Verity DU perform PDP activation successfully,Pass,,,,
-5965,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,OTA and OTA BY OP,no,no,no,yes,"In case of IMSI detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked and GPRS detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked or DC_Status_RLC_Release_Discard,IMSI/GPRS detach is aborted and local detach is performed. This leads unsync between UE and network.If this SBP is enabled, IMSI and GPRS detach(due to power off) procedure will be retried in the case of lower layer failure with above mentio",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If Disable, IMSI and GPRS detach will not be re-tried.<BR>0x1:If Enable, IMSI and GPRS detach will be re-tried",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR>Test Time (minutes) : 10 mins <BR>[Init] : UE is expected to register to 23G network for both CS-PS domain. <BR>[Test Step]<BR>1. Perform Detach <BR>2. UE cannot send DETACH_REQ to Network as RLC ACK for Detach fails because of lower layer failure.<BR><BR>[Expected Result]<BR> UE is expected to perform Detach request again,Pass,,,,
-5966,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_IMSI_PAGING_ATTACK_HANDLING,modem_sbp_config[84].SBP_IMSI_PAGING_ATTACK_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIMSI paging attack preventionbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the handling of IMSI paging attack.<BR>0:Disable the handling of IMSI paging attack.,,,__ENABLE_SBP_IMSI_PAGING_ATTACK_HANDLING__,Anti Fake Cell,OP Requirement,,,,Pass,,,,
-5967,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_INACTIVE_MODE_SERVICE_RECOVERY,modem_sbp_config[102].SBP_INACTIVE_MODE_SERVICE_RECOVERY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable inactive mode service recovery featurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5968,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_INTERROGATE_GROUPS_OF_SS,modem_sbp_config[30].SBP_INTERROGATE_GROUPS_OF_SS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureallow to interrogate groups of Supplementary Servicebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5969,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_INTER_RAT_RSSI_SORTED_SEARCH,modem_sbp_config[86].SBP_INTER_RAT_RSSI_SORTED_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE will trigger inter-rat RSSI sorted search if MCC is unknownbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5970,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_IRAT_PINGPONG_REDUCTION,modem_sbp_config[94].SBP_IRAT_PINGPONG_REDUCTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable IRAT PINGPONG DETECTION bit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, check IRAT PINGPONG status and try to reduce PINGPONG.<BR>0:Disable, not check IRAT PINGPONG status.",,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5971,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_IS_ATT_CONN_REJ,modem_sbp_config[8].SBP_IS_ATT_CONN_REJ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply AT&T Cell Barring Requirementbit 0:0:MTK default settingbit 1:1:AT\&T setting",BIT,1,,1,__IS_ATT_CONN_REJ__ : 0x01<BR>DEFAULT_VALUE : 0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Receive reject *5<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
-5972,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_IS_CONN_PAGING_LOCAL_REL,modem_sbp_config[17].SBP_IS_CONN_PAGING_LOCAL_REL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger UE back to LTE IDLE mode when receiving unexpected PS domain PAGING in LTE CONNECTED modebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Trigger local RELEASE if receiving CONNECTED mode paging after a configurable timer.<BR>0:Disable. Handle CONNECTED mode paging within a fix timer.,,,SBP_LTE_IGNORE_CONN_PS_PAGING,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5973,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_IS_OP07,modem_sbp_config[11].SBP_IS_OP07,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable AT&T's miscellaneous features to be compatible with AT&T's networkbit 0:0:Disable AT&T's miscellaneous featuresbit 1:1:Enable AT&T's miscellaneous features",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-5974,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_IS_OP12,modem_sbp_config[15].SBP_IS_OP12,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis SBP feature option is used to support VzW's general features to be compatible with VzW's network.bit 0:0:Disable. Not support VzW's general featuresbit 1:1:Enable. Support VzW's general features",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-5975,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_KOR_CHANNEL_PRIORITY_STORED_SEARCH,modem_sbp_config[70].SBP_KOR_CHANNEL_PRIORITY_STORED_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to configure Priority for stored cell search in Korea",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5976,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_KT_ENABLE_TRANSFER_SS_STATUS,modem_sbp_config[69].SBP_KT_ENABLE_TRANSFER_SS_STATUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTransfer SS status bits of supplementary services for KR KT MNObit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1<BR>1:enable<BR>0:disable,,,__KT_ENABLE_TRANSFER_SS_STATUS__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test time (5 minutes)<BR>[Init]<BR>It needs to be tested with AT command.<BR>[Test step]<BR>1. Connect Terminal for sending AT command.<BR>2. Registration/Activation CFU. <BR> AT+ECUSD=1,1,"**21*<FTN>#"<BR>3. Interrogate CFU <BR> AT+ECUSD=1,1,"*#21#"<BR>[Expected Result]<BR><Status vector> +CCFC: <1st param>, <second param>, <FTM>, <numbering plan><BR> 4bit / 3bit / 2bit / 1bit<BR>Quiescent / Provision / Registration / Active<BR>* <1st param>, P and R bits should be enabled as well as A bit when CFU is activated and registered. <BR>It will be 7 when CFU is activated successfully.<BR><BR>(Result example)<BR>+CCFC: 7, 1,"FTN", 145<BR>+CCFC: 7, 8,"FTN", 145<BR>+CCFC: 7, 16,"FTN", 145",Pass,,,,
-5977,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_L2_RANDOM_FILL_BIT,modem_sbp_config[0].SBP_L2_RANDOM_FILL_BIT,OTA and OTA BY OP,no,no,no,yes,"Feature as defined in 3GPP TS44.006 Ch.5.<BR>If a TDMA frame contains a length indicator that has a value less than N201, the frame contains fill bits.<BR>Each fill bit shall be set to a random value when sent by the mobile station. In MTK product, this feature is on by default.<BR>Note: There may be some old networks that could not recognize the random fill patterns.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Ran dom values will be set for L2 fill bits.<BR>0:Fill bits in L2 frame will not set to random values,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-5978,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_LBS_CP_BLACK_NILR,modem_sbp_config[39].SBP_LBS_CP_BLACK_NILR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLBS block control plane NW initiated location requestbit 0:0:CP NILR allowedbit 1:1:CP NILR not allowed",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:All NILR operations are blocked<BR>0:The NILR operations are allowed,,,__LBS_CP_BLACK_NILR__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5979,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_LBS_CP_PLMN_BLACK_LIST,modem_sbp_config[39].SBP_LBS_CP_PLMN_BLACK_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLBS block control plane NW initiated location request with PLMN black listbit 0:0:Disable black listbit 1:1:Enable black list",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:The NILR PLMN black lists are enabled<BR>0:The NILR PLMN black lists are not enabled,,,__LBS_CP_PLMN_BLACK_LIST__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5980,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LBS_LPP_ACK_REQUESTED_FOR_UL_MSG,modem_sbp_config[83].SBP_LBS_LPP_ACK_REQUESTED_FOR_UL_MSG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable LPP requests ack message for uplink messagebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-5981,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_LBS_LPP_R13_ECID_TDD_RXTX_TIME_DIFF_FEATURE,modem_sbp_config[74].SBP_LBS_LPP_R13_ECID_TDD_RXTX_TIME_DIFF_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable LPP R13 ueRxTxSupTDD featurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-5982,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_LBS_OTDOA_ADDITIONAL_NBR_CELL_INFO,modem_sbp_config[57].SBP_LBS_OTDOA_ADDITIONAL_NBR_CELL_INFO,Not Support,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureOTDOA additional neighbour cells capability supportbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0/1,,,,MD Config,Modem - Customer Requirement,,,No need to test.,Untested,,,,
-5983,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_LBS_OTDOA_CS_FOR_RSTD,modem_sbp_config[57].SBP_LBS_OTDOA_CS_FOR_RSTD,Not Support,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureLBS_OTDOA_CS_FOR_RSTDbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0/1,,,,MD Config,Modem - Customer Requirement,,,No need to test.,Untested,,,,
-5984,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_LBS_RESPONSE_EARLY_FIX,modem_sbp_config[66].SBP_LBS_RESPONSE_EARLY_FIX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable LPP R12 early fix featurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-5985,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_LOCATION_BASE_ALT,modem_sbp_config[86].SBP_LOCATION_BASE_ALT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLocation base search alternative 1bit 0:0:alt 1bit 1:1:alt 1",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-5986,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_LOGGING_RATE_ADJ,modem_sbp_config[87].SBP_LOGGING_RATE_ADJ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE will adjust logging rate according to some re-defined conditions to reduce logging amountbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable ogging rate adjustment<BR>0:disable logging rate adjustment,,,__LOGGING_RATE_ADJ__,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-5987,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_LTE_AUTH_REJ_MAPPING_TO_15,modem_sbp_config[35].SBP_LTE_AUTH_REJ_MAPPING_TO_15,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuremap AUTH reject to reject cause #15bit 0:0:Disable. Follow spec AUTH reject handlingbit 1:1:Enabled. AUTH reject mapping to cause #15 and follow #15 handling",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-5988,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_CA,modem_sbp_config[9].SBP_LTE_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Carrier Aggregation Operationbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,if not define MT6739,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5989,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_LTE_CAP_REL_R13,modem_sbp_config[78].SBP_LTE_CAP_REL_R13,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport LTE capability Release 13 related IEbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__ENABLE_LTE_CAP_REL_R13__,MD Config,Modem - Customer Requirement,,,NO (Phase out),Untested,,,,
-5990,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_LTE_CAP_REL_R14,modem_sbp_config[78].SBP_LTE_CAP_REL_R14,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport LTE capability Release 14 related IEbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__ENABLE_LTE_CAP_REL_R14__,MD Config,Modem - Customer Requirement,,,NO (Phase out),Untested,,,,
-5991,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LTE_CA_PREFER,modem_sbp_config[83].SBP_LTE_CA_PREFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTry to camp on cell which NW will config CAbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-5992,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_LTE_CELLSEL_BY_RSRQ,modem_sbp_config[61].SBP_LTE_CELLSEL_BY_RSRQ,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Cell Selection by RSRP/RSRQbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-5993,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_LTE_CELL_RESEL_ENH,modem_sbp_config[60].SBP_LTE_CELL_RESEL_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Cell Reselection Enhancementbit 0:0:Not enabled the LTE Cell Reselection Enhancementbit 1:1:Enable the LTE Cell Reselection Enhancement",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:not enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (minutes) <BR> [Init] <BR> [Test Step] <BR> [Expected Result],Pass,,,,
-5994,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_LTE_COMP_UL,modem_sbp_config[10].SBP_LTE_COMP_UL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUL Coordinated Multi-Point (CoMP) transmission and receptionbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,NO,Coordinated Multi-Point Operation for LTE - COMP_LTE_UL (UL CoMP),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5995,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_CONN_ALWAYS_RCV_UE_PCH,modem_sbp_config[18].SBP_LTE_CONN_ALWAYS_RCV_UE_PCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow NW to notify incoming call with PAGING in LTE CONNECTED modebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Monitor UE PO in CONNECTED mode<BR>0:Disable. Not monitor UE PO when enter CONNECTED mode.,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-5996,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLet user can disable band by plmnbit 0:0:Not enabled this featurebit 1:1:Enable this feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__LTE_CUSTOM_DISABLE_BAND_BY_PLMN__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5997,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurecustom disable band by plmn can be used under test sim or test modebit 0:0:Not enabled this feature for test sim or test modebit 1:1:Enabled this feature for test sim or test mode",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5998,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_LTE_DISABLE_ALL_ROHC_WHEN_VOLTE_OFF,modem_sbp_config[85].SBP_LTE_DISABLE_ALL_ROHC_WHEN_VOLTE_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureif volte off, disable all rohc profile.bit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:enabled ==> If volte off, disable all rohc profile. if volte on, according nvram.<BR>0:disable",,,__LTE_DISABLE_ALL_ROHC_WHEN_VOLTE_OFF__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-5999,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_LTE_DISABLE_BW,modem_sbp_config[27].SBP_LTE_DISABLE_BW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis SBP is used to disable the LTE channel bandwidth on certain bandbit 0:0:Not support LTE DISABLE BWbit 1:1:Support LTE DISABLE BW",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,"__KOR_CUSTOMIZATION__, __LTE_DISABLE_BW__",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6000,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_LTE_DISABLE_ENH_CELLSEL,modem_sbp_config[34].SBP_LTE_DISABLE_ENH_CELLSEL,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureDisable LTE Barred Cell Improvementbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:disable<BR>0:not disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6001,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_LTE_DISABLE_SINGLE_BAND_WW_FILTER,modem_sbp_config[102].SBP_LTE_DISABLE_SINGLE_BAND_WW_FILTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable WW LTE band table filter for single bandbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6002,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_LTE_DL_MIMO_DISABLE,modem_sbp_config[77].SBP_LTE_DL_MIMO_DISABLE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after Gen97. User could refer to NVRAM_EF_EL1_RX_MIMO_CONFIG_LID to achieve the same functionality.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Obsolete,,,NO,MD Config,Modem - Customer Requirement,,,NO (Phase out),Untested,,,,
-6003,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_LTE_DYNAMIC_DISABLE_CA_BY_PLMN,modem_sbp_config[80].SBP_LTE_DYNAMIC_DISABLE_CA_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature LTE Dynamic Disable CA By PLMN will disable ca by plmn bit 0 : Not Supported,bit 1:Supported",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__LTE_DYNAMIC_DISABLE_CA_BY_PLMN__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6004,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_LTE_DYNAMIC_DOWNGRADE_CAPABILITY,modem_sbp_config[101].SBP_LTE_DYNAMIC_DOWNGRADE_CAPABILITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDynamic downgrade UE's reported capability when camp on problem cell.<BR>bit 0 : Not Supported<BR>bit 1 : ;Supported",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,__DYNAMIC_DOWNGRADE_CAPABILITY__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6005,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_LTE_EAB,modem_sbp_config[24].SBP_LTE_EAB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE EABbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:disable<BR>0x01:enable,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) Y<BR> Test Time (minutes) 5<BR> [Init] <BR> Set SBP <BR> [Test Step] <BR>Config EAB<BR>Setup RRC connection<BR> [Expected Result]<BR>Setup RRC connection successfully,Pass,,,,
-6006,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_LTE_EARLY_OOS_SEARCH_ENH,modem_sbp_config[90].SBP_LTE_EARLY_OOS_SEARCH_ENH,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Early OOS Search Enhancementbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6007,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_LTE_EDLMIMO,modem_sbp_config[10].SBP_LTE_EDLMIMO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Enhanced DL MIMObit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6008,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_LTE_ENH_RSRP_SEARCH,modem_sbp_config[31].SBP_LTE_ENH_RSRP_SEARCH,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureSearch Better LTE Cell when CSFB Fast Returnbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6009,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_LTE_EPLMN_SEARCH,modem_sbp_config[36].SBP_LTE_EPLMN_SEARCH,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureCMCC/CMHK LTE Cell (Re)Selection Improvementbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6010,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_FAST_PLMN_LIST,modem_sbp_config[18].SBP_LTE_FAST_PLMN_LIST,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureUse history information to speed up LTE PLMN list procedurebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6011,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_LTE_FAST_PLMN_LIST_BY_REGION,modem_sbp_config[98].SBP_LTE_FAST_PLMN_LIST_BY_REGION,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureUse stored environment information to speed up LTE PLMN list procedurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6012,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_LTE_FAST_POWER_ON_SEARCH,modem_sbp_config[17].SBP_LTE_FAST_POWER_ON_SEARCH,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Always disabled after UMOLYA.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6013,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_FEICIC,modem_sbp_config[9].SBP_LTE_FEICIC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE (Further) Enhanced Inter-cell Interference Coordinationbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support<BR>1:support,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6014,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_FEMTOCELL_SYSTEM_SELECTION,modem_sbp_config[18].SBP_LTE_FEMTOCELL_SYSTEM_SELECTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl LTE Femto Cell Selection mechanismbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Perform the LTE Femtocell selection according to UE option setting.<BR>0:Disable. Perform the LTE Femtocell selection according to 3GPP requirement.,,,__SBP_LTE_FEMTOCELL_SYSTEM_SELECTION__,MD Config,Modem - Customer Requirement,,,"Manual CSG selection in E-UTRA with CSG list on USIM,",Pass,,,,
-6015,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_LTE_FORCE_RX_NESIB_B4_CONN,modem_sbp_config[34].SBP_LTE_FORCE_RX_NESIB_B4_CONN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Always disabled after UMOLYA.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,No,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6016,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_IDC_R11,modem_sbp_config[9].SBP_LTE_IDC_R11,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIn-device Coexistence(IDC) featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config IDC<BR> [Expected Result]<BR>Config IDC successfully,Pass,,,,
-6017,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_IGNORE_CONN_PS_PAGING,modem_sbp_config[18].SBP_LTE_IGNORE_CONN_PS_PAGING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore unexpected PS domain PAGING when UE is in LTE CONNECTED modebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, Ignore PS Paging in Connected mode.<BR>0:Disable, Handle PS Paging in Connected mode.",,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6018,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_LTE_IRCR_PRIO_BOOST,modem_sbp_config[68].SBP_LTE_IRCR_PRIO_BOOST,OTA and OTA BY OP,no,no,no,yes,"As per Standard, While LTE freq IRCR priority is same as GSM, the related LTE freq would not be configed to measured, thus the IRCR to this/these LTE freq might be blocked consequently.<BR>In order to facilitate the IRCR procedure and LTE occupation rate in this case, the LTE freq IRCRpriority will boost higher than GSM for workaround.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS LTE IRCR boost enabled.<BR>0:GAS LTE IRCR boost not enabled.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6019,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LTE_JDG_POTENTIAL_CA_CELL,modem_sbp_config[83].SBP_LTE_JDG_POTENTIAL_CA_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTry to judge CA cell by CA characteristicbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-6020,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_LTE_LARGE_BW_HIGH_PRIORITY,modem_sbp_config[98].SBP_LTE_LARGE_BW_HIGH_PRIORITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureselect large bandwidth cell in high prioritybit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-6021,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_LTE_LARGE_BW_PREFER,modem_sbp_config[98].SBP_LTE_LARGE_BW_PREFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTry to camp on cell whose bandwidth is largebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-6022,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_MBMS,modem_sbp_config[9].SBP_LTE_MBMS,OTA,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureMultimedia Broadcast Multicast Service (MBMS) R9 Featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MBMS support in LTE (eMBMS),4G,,,Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS case<BR>[Test Step] Run the MBMS case<BR>[Expected Result] <BR>MBMS session can be opened,Pass,,,,
-6023,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_MBMS_COUNTING,modem_sbp_config[9].SBP_LTE_MBMS_COUNTING,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureMultimedia Broadcast Multicast Service (MBMS) R10 Counting Featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MBMS support in LTE (eMBMS),4G,,,"Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS-Counting case<BR>[Test Step] Run the MBMS-Counting case<BR>[Expected Result] <BR>MBMS session can be opened, and related MBMS-Counting action passed.",Pass,,,,
-6024,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_LTE_MBMS_SCELL,modem_sbp_config[15].SBP_LTE_MBMS_SCELL,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureMultimedia Broadcast Multicast Service (MBMS) on SCell Featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MBMS support in LTE (eMBMS),4G,,,Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS SCell case<BR>[Test Step] Run the MBMS SCell case<BR>[Expected Result] <BR>MBMS session can be opened on SCell,Pass,,,,
-6025,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_MBMS_SERVICE_CONTINUITY,modem_sbp_config[9].SBP_LTE_MBMS_SERVICE_CONTINUITY,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureMultimedia Broadcast Multicast Service (MBMS) R11 Service Continuity Featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MBMS support in LTE (eMBMS),4G,,,"Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS Service continuity case<BR>[Test Step] Run the MBMS Service continuity case<BR>[Expected Result] <BR>MBMS session can be opened, and Service continuity is OK.",Pass,,,,
-6026,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_LTE_MDT,modem_sbp_config[14].SBP_LTE_MDT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureenable LTE Minimization of Drive Tests (MDT) featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config MDT<BR> [Expected Result]<BR>Config MDT successfully,Pass,,,,
-6027,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_MRU_SEARCH,modem_sbp_config[18].SBP_LTE_MRU_SEARCH,OTA and OTA BY OP,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Always enabled after UMOLYA.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6028,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_LTE_NO_COMBINED_ATTACH_BY_SIM,modem_sbp_config[64].SBP_LTE_NO_COMBINED_ATTACH_BY_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not disable EUTRAN without consideration IMS voice availabilitybit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6029,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_LTE_ONLY_OPER_SIM_LTE_ONLY_MODE,modem_sbp_config[63].SBP_LTE_ONLY_OPER_SIM_LTE_ONLY_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE only operator SIM:RAT mode changes as LTE only in PS supporting LTEbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"After enabling the SBP, rat mode should be locked at LTE",Pass,,,,
-6030,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_LTE_PARTIAL_BAND,modem_sbp_config[27].SBP_LTE_PARTIAL_BAND,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Phaseoutbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-6031,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_LTE_PREFER_ENDC_RESEL_ENH,modem_sbp_config[103].SBP_LTE_PREFER_ENDC_RESEL_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureprefer LTE EN-DC cell enhancement for idle reselectionbit 0:0:Not Enabledbit 1:1:Enable",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable prefer ENDC reselection enhancement<BR>0:disable prefer ENDC reselection enhancement,,,__DISABLE_LTE_PREFER_ENDC_RESEL_ENH__,R15 baseline 5G,5G Baseline,,,follow MCF RD IT SOP,Pass,,,,
-6032,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_LTE_RESEL_HIGH_POWER_PREFER,modem_sbp_config[79].SBP_LTE_RESEL_HIGH_POWER_PREFER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not reselect to RSRP diff too large cellbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-6033,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_ACTIVE,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_ACTIVE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnhanced MPSR in 1xRTT connected modebit 0:0:Disable enhanced MPSR in 1xRTT connected mode.bit 1:1:Enable enhanced MPSR in 1xRTT connected mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6034,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_EVDO_IDLE,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_EVDO_IDLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnhanced MPSR in 1xRTT/EVDO idle modebit 0:0:Disable enhanced MPSR in 1xRTT/EVDO idle mode.bit 1:1:Enable enhanced MPSR in 1xRTT/EVDO idle mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6035,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_EVDO_ACTIVE,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_EVDO_ACTIVE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnhanced MPSR in EVDO connected modebit 0:0:Disable enhanced MPSR in EVDO connected mode.bit 1:1:Enable enhanced MPSR in EVDO connected mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6036,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_LTE_SEC_SKIP,modem_sbp_config[40].SBP_LTE_SEC_SKIP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSkip LTE security protection for NAS messagesbit 0:0:Disabled. NOT skip LTE security protection for NAS messages.bit 1:1:Enabled. Skip LTE security protection for NAS messages.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Skip LTE security protection for NAS messages.<BR>0:Disabled. NOT skip LTE security protection for NAS messages.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6037,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_LTE_SET_RAT_DO_EPS_DETACH,modem_sbp_config[37].SBP_LTE_SET_RAT_DO_EPS_DETACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo EPS DETACH when changing UE's supported RAT mode settingbit 0:0:Disable. Do Combined EPS/IMSI DETACH when changing UE's supported RAT mode settingbit 1:1:Enabled. Do EPS DETACH when changing UE's supported RAT mode setting",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Do EPS DETACH when changing UE's supported RAT mode setting.<BR>0:Disable. Do Combined EPS/IMSI DETACH when changing UE's supported RAT mode setting.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6038,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_LTE_SM_REJ_15_PERFORMANCE_IMPROVEMENT,modem_sbp_config[37].SBP_LTE_SM_REJ_15_PERFORMANCE_IMPROVEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen receiving reject #15, disable EUTRAN in a non-Korea MCC.bit 0:0:Turn-off. Do not disable EUTRAN when receiving #15 in a non-Korea MCC networkbit 1:1:Turn-on. Disable EUTRAN when receiving #15 in a non-Korea MCC network",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6039,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_LTE_SON,modem_sbp_config[10].SBP_LTE_SON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Self-Organizing Network Featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Open SON<BR> [Expected Result]<BR>Report SON,Pass,,,,
-6040,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_LTE_SUPPORT_NONDEFAULT_SIB2_UL,modem_sbp_config[58].SBP_LTE_SUPPORT_NONDEFAULT_SIB2_UL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDetermine if UE can camp on the LTE cell with non_default UL_FREQ.bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE can't camp on the LTE cell with UL_FREQ in SystemInformationBlockType2 which is not determined from the default TX-RX frequency separation defined in TS 36.101. UE will treat this cell as a not-suitable cell.<BR>1:UE can camp on the LTE cell with UL_FREQ in SystemInformationBlockType2 which is not determined from the default TX-RX frequency separation defined in TS 36.101.,,,No,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
-6041,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LTE_T325_DEPRIORITY,modem_sbp_config[83].SBP_LTE_T325_DEPRIORITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable T325 deprioritizationbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6042,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_LTE_U,modem_sbp_config[28].SBP_LTE_U,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureLTE Unlicensed.<BR>bit 0 Not Supported<BR>bit 1 Supported",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,__LTE_U__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6043,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure LU before CSFB ECC call if LAI is differentbit 0:0:Do not trigger LU before CSFB ECC call if LAI is differentbit 1:1:Do LU before CSFB ECC call if LAI is different",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Do not Configure LU before CSFB ECC call if LAI is different<BR>0x1:Configure LU before CSFB ECC call if LAI is different,,,__ENABLE_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] NA <BR>[Test Step]<BR>1. Register UE in LTE.<BR>2. Perform Emergency call <BR>[Expected Result]<BR>UE is expected to fo LU before making Emergency call if current LAI is different from register LAI.,Pass,,,,
-6044,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure the option to do LU before making a CSFB emergency callbit 0:0:LU not needed before ECCbit 1:1:LU needed before ECC",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00:If disable, UE will behave as per spec<BR>0x01:If enable, UE need to do LU before CSFB emergency call",,,__DISABLE_LU_BEFORE_CSFB_ECC_NEEDED__,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Add the PLMN in LR_BEFORE_CSFB_ECC_PLMN_LIST array in mm_custom_config.c <BR> Boot up the device & UE register in LTE.<BR> [Test Step]<BR> Perform Emergency call & UE perform CSFB to 23G network but with diffrent LA given by network in previous LTE registration.<BR> <BR> [Expected Result]<BR> UE is expected to emergency call before LU,Pass,,,,
-6045,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_MANUAL_LIST_DISPLAY_SUITABLE_ONLY,modem_sbp_config[61].SBP_MANUAL_LIST_DISPLAY_SUITABLE_ONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureOnly Display suitable cell for manual listbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6046,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_MANUAL_MODE_NW_SEL,modem_sbp_config[43].SBP_MANUAL_MODE_NW_SEL,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow changing network selection modebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,Test manual selection mode,Pass,,,,
-6047,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_MAPPING_MCC_OTA_INVALID,modem_sbp_config[94].SBP_MAPPING_MCC_OTA_INVALID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable MCC mapping, when MCC in OTA is not validbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disbale,,,,MD Config,Modem - Customer Requirement,,,test in machine<BR>[Init] <BR>Sprint card<BR>machne config a 1xRTT cell with MCC 000<BR>[Test Step] <BR>power on the phone<BR>[Expected Result]<BR>UE register normally,Pass,,,,
-6048,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_MCC_ASSIST_FULLBAND_RAT_SELECTION,modem_sbp_config[20].SBP_MCC_ASSIST_FULLBAND_RAT_SELECTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMCC assisted fullband RAT selection: select fullband search RAT according to current MCC.bit 0:0:Disabled. Not use current MCC to select fullband RATbit 1:1:Enabled. Use current MCC to select fullband RAT",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6049,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_MCC_BAND_ENH_FOR_PLMN_SEARCH,modem_sbp_config[67].SBP_MCC_BAND_ENH_FOR_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This SBP is not used anymore.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6050,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_MCC_BAND_MANUAL_LIST_OPT,modem_sbp_config[86].SBP_MCC_BAND_MANUAL_LIST_OPT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNWSEL will bring MCC band for manual list optimizationbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6051,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_MDT_LOCATION_TIME_VALIDITY,modem_sbp_config[59].SBP_MDT_LOCATION_TIME_VALIDITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureapply time validity on MDT location infobit 0:0:Don't Applybit 1:1:Apply",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Don't Apply<BR>1:Apply,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6052,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_MDT_OBTAINLOCATION_OPEN_GPS,modem_sbp_config[65].SBP_MDT_OBTAINLOCATION_OPEN_GPS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChoose location info aquiring method for obtainLocation-r11bit 0:0:Use stored locationbit 1:1:Open GPS",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (minutes) <BR> [Init] <BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6053,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_MERGE_LAU_AND_ATTACH_EPLMN_LIST,modem_sbp_config[64].SBP_MERGE_LAU_AND_ATTACH_EPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMerge EPLMN list when they are different in LAU_ACCEPT and ATTACH_ACCEPT for the same RPLMNbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6054,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,modem_sbp_config[100].SBP_MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConvert RAU/Service Reject cause #7 to #111 during CSFBbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GMM shall convert RAU or Service reject cause #7 to #111 during CSFB<BR>0:GMM shall not convert RAU or Service reject cause #7 to #111 during CSFB,,,__MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR> Test Time (minutes) : 10 mins<BR> [Init] NA<BR> [Test Step ] Perform CSFB Call, & trigger Data services Network send RAU reject #7 <BR> [Expected Result]<BR> UE expected to camp & data services",Pass,,,,
-6055,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCustomize T3240 Timeout valuebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x1:If disable, UE support T3240 Timeout value as per spec<BR>0x1:If enable, UE supports Customize T3240 Timeout value",,,__MM_CUSTOMIZE_T3240_TIMEOUT_VALUE__,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G on PLMN 46000F<BR>-> Trigger CS connection release after CS registration is done<BR>->Observe T3212 should run with 12 sec<BR>[Expected Result]<BR>Observe T3212 should run with 12 sec,Pass,,,,
-6056,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAllow custom ATTACH retry T3311 timer value on RSIM/AKA stackbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Allow custom ATTACH retry T3311 timer value on RSIM/AKA stack .<BR>0x00:Use T3311 value as mentioend in 3GPP spec 24.008,,,__MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM__,VSIM 1.0,SIM,,,Test in machine (Y/N) N<BR>Test Time (minutes) 10 mins <BR>[Init] <BR>Configure MM_CUSTOM_T3311_TIMER_VALUE_ON_AKA_STACK in custom_mm_config.c <BR>[Test Step]<BR>1. Enable RSIM & AKS Stack (virtual card)<BR>2. Perform PS attach request & start T3311<BR>[Expected Result]<BR>Attach retry T3311 timer value based on initial configur value,Pass,,,,
-6057,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,OTA and OTA BY OP,no,no,no,yes,Convert MM/GMM Reject cause based on HPLMN and VPLMN,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If this SBP is disabled, UE will behave as per Network reject cause<BR>1:If this SBP is enabled, MM will convert various reject cause based on cusotmer requirement .",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 15 mins<BR> [Init]<BR> Configure MCF NVRAM_MM_GMM_REJECT_cAUSE_MAPPING_LID {0x04,0x07,46001,46001,0xff,0xff,0xff,0x014,0x00} <BR> [Test Step]<BR> UE perform GMM Attach request on HPLMN( i.e. 46001)& Network send attach reject with cause #7. ( If you want ot use other HPLMN, please update the MCF NVRAM_MM_GMM_REJECT_CAUSE_MAPPING_LID param3, param4. with the respective HPLMN )<BR><BR> <BR> <BR> [Expected Result]<BR> UE convert attach reject cause #7 to reject cause #14 & GPRS is still in service",Pass,,,,
-6058,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger LU after coming to 23g from 4g only if different LAbit 0:0:MM will force LU after inter system change from S1bit 1:1:MM will not force LU after inter system change from S1",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:This feature will not trigger LU during inter system change from S1 bit<BR>0x1:This FeatureTrigger LU after coming to 23g from 4g only if different LA .MM will force LU after inter system change from S1bit,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> boot up the device & UE register in LTE <BR> [Test Step]<BR> UE perform IRAT to 23G on same register LA. <BR> <BR> [Expected Result]<BR> UE is expected to trigger LU irrespective of registered LA is same or not,Pass,,,,
-6059,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_DISABLE_PREVIOUS_RPLMN_FROM_NVRAM,modem_sbp_config[1].SBP_MM_DISABLE_PREVIOUS_RPLMN_FROM_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable to use previous registered PLMN from NVRAM for manual selection modebit 0:0:Turn-off. Use previous RPLMN from NVRAMbit 1:1:Turn-on. Not use previous RPLMN from NVRAM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6060,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_DISABLE_RETRY_ABNORMAL_LAI,modem_sbp_config[0].SBP_MM_DISABLE_RETRY_ABNORMAL_LAI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureModem retries abnormal LAI/RAI/TAI when T3212/T3302/T3402 expiry.bit 0:0:Turn-off. Modem retries abnormal LAI/RAI/TAI after 10/15/15 minutesbit 1:1:Turn-on. Modem retries abnormal LAI/RAI/TAI when T3212/T3302/T3402 expiry",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6061,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_HPPLMN_1ST_ATTEMPT_ENHANCE,modem_sbp_config[0].SBP_MM_HPPLMN_1ST_ATTEMPT_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen the SBP is on, UE will apply the first higher priority scan timer when UE is registered on a VPLMN for \"Power on\", \"Out Of Service\" and \"Manual selection\". If SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER is off , the first higher priority PLMN scan timer will be 2 min.bit 0:0:Turn-off. Do not apply the timer of first higher priority PLMN scanbit 1:1:Turn-on. Apply the timer of first higher priority PLMN scan",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6062,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_AUTO_MODE,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_AUTO_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether to ignore EQPLMN in auto modebit 0:0:Turn-off. Do not ignore EQPLMN in auto modebit 1:1:Turn-on. Ignore EQPLMN in auto mode",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6063,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_MANUAL_MODE,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_MANUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether to ignore EQPLMN in manual modebit 0:0:Turn-off. Do not ignore EQPLMN in manual modebit 1:1:Turn-on. Ignore EQPLMN in manual mode",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6064,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_PLAY_EQPLMN,modem_sbp_config[1].SBP_MM_IGNORE_PLAY_EQPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore equivalent PLMNs if registered PLMN is Play.bit 0:0:Disabled. Do not ignore EPLMNs if registered PLMN is Playbit 1:1:Enabled. Ignore EPLMNs if registered PLMN is Play",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6065,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_YOIGO_EQPLMN,modem_sbp_config[1].SBP_MM_IGNORE_YOIGO_EQPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore equivalent PLMNs if registered PLMN is Yoigo.bit 0:0:Disabled. Do not ignore EPLMNs if registered PLMN is Yoigobit 1:1:Enabled. Ignore EPLMNs if registered PLMN is Yoigo",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6066,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_MM_IMSI_DETACH_WHEN_MM_CONN_ACTIVE,modem_sbp_config[10].SBP_MM_IMSI_DETACH_WHEN_MM_CONN_ACTIVE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure option of IMSI detach in MM connection active statebit 0:0:Do not allow IMSI detach in MM connection active statebit 1:1:Allow IMSI detach in MM connection active state",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:if disable sending of IMSI detach during MM conneciton active is not allowe.d<BR>0x1:If enable allow MM to send IMSI detach when MM connection active,,,__MM_IMSI_DETACH_WHEN_MM_CONN_ACTIVE__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G <BR>-> Trigger CS Call <BR>-> SIM error<BR>[Expected Result]<BR>UE should do IMSI deatch even when the MM state is MM connection active,Untested,,,,
-6067,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_INTERNATIONAL_HPPLMN_SEARCH,modem_sbp_config[1].SBP_MM_INTERNATIONAL_HPPLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRequire UE to perform international HPPLMN search when it registers on a US PLMN and the HPPLMN belongs to Canadabit 0:0:Disabled. Not search HPPLMNs in other countriesbit 1:1:Enabled. Search HPPLMNs in other countries",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6068,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_MM_LU_REJ_17_IN_MANUAL_MODE,modem_sbp_config[16].SBP_MM_LU_REJ_17_IN_MANUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport specific cause for LU reject #17 in manual mode.bit 0:0:Turn-off. Not apply the specific cause for LU reject #17bit 1:1:Turn-on. Apply the specific cause for LU reject #17",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6069,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_MM_NOT_STAY_ON_FBLA_FOR_REG_PROV,modem_sbp_config[6].SBP_MM_NOT_STAY_ON_FBLA_FOR_REG_PROV,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAdd LAI in the list of 'forbidden location areas for roaming' if reject cause 12 is received.bit 0:0:not supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,__MM_NOT_STAY_ON_FBLA_FOR_REG_PROV__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G<BR>-> Trigger LAU reject with cause 12 <BR>-> MM will stay in limited service <BR>[Expected Result]<BR>The mobile station shall store the LAI in the list of "forbidden location areas for regional provision of service".<BR>The MS shall perform a cell selection when back to the MM IDLE state according to 3GPP TS 43.022 [82] and<BR>3GPP TS 25.304 [98].,Untested,,,,
-6070,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_MM_NOT_TRY_ANOTHER_RAT_FOR_LU_ABNORMAL,modem_sbp_config[3].SBP_MM_NOT_TRY_ANOTHER_RAT_FOR_LU_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSkip other RAT for registration abnormal case.bit 0:0:Turn-off. Not skip other RAT of the current PLMNbit 1:1:Turn-on. Skip other RAT of the current PLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6071,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_MM_PERFORM_PLMN_SEARCH_AFTER_LU_ABNORMAL,modem_sbp_config[3].SBP_MM_PERFORM_PLMN_SEARCH_AFTER_LU_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNWSEL performs search after LU abnormal.bit 0:0:Turn-off. Not perform PLMN selection when test SIM is insertedbit 1:1:Turn-on. Perform PLMN selection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6072,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_MM_REL11_LR_REJ_CONGESTION,modem_sbp_config[14].SBP_MM_REL11_LR_REJ_CONGESTION,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet abnormal cout to max for reject with cause 22 which follows R11 of 3GPP spec.bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If disable, Device follow LR9 behavior<BR>0x1:If enable, Device follows LR11 behavior to set abnormal count to maximum value",,,__DISABLE_REL11_LR_REJ_CONGESTION__,,,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G in TDD mode<BR>-> Trigger RAU reject with cause 22 <BR>-> UE should set the RAU attempt counter to 5<BR>[Expected Result]<BR>UE should set the RAU attempt counter to 5,Untested,,,,
-6073,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_MM_SEARCH_HPLMN_BEFORE_RPLMN,modem_sbp_config[2].SBP_MM_SEARCH_HPLMN_BEFORE_RPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSearch HPLMN before RPLMNbit 0:0:Turn-off. Search RPLMN before HPLMNbit 1:1:Turn-on. Search HPLMN before RPLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6074,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_MM_SKIP_LU_AFTER_CSFB_FOR_EAFR,modem_sbp_config[22].SBP_MM_SKIP_LU_AFTER_CSFB_FOR_EAFR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMM_SKIP_LU_AFTER_CSFB_FOR_EAFRbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:UE shall skip LU after CSFB call release and trigger automatic fast return to LTE feature. If UE could not return to LTE after triggering fast return to LTE, it shall trigger LU after camping back in GSM or UMTS RAT<BR>0:UE shall perform LU after CSFB call release. Alternatively current camped PLMN will be checked in CONFIGURE_SKIP_LU_AFTER_CSFB_FOR_EAFR_PLMN (defined under MM custom config file) to take decision, and will skip LU even SBP is disabled",,,__MM_SKIP_LU_AFTER_FOR_EAFR__,AFR - Autonomous Fast Return,MTK Proprietary,,,Test in machine (Y/N) : N<BR> Test Time (minutes) : NA<BR> [Init] : NA<BR> [Test Step]<BR> Perform CSFB call & click disconnect after 1 mins<BR> [Expected Result]<BR> UE is expected to move to LTE after call release,Pass,,,,
-6075,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_MM_STRICT_PRECONDITION_FOR_REL7_MANUAL_RHPLMN_SEL,modem_sbp_config[29].SBP_MM_STRICT_PRECONDITION_FOR_REL7_MANUAL_RHPLMN_SEL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply strict precondition for manual R/HPLMN selection of R7 optimizationbit 0:0:Disabled. Apply this optimizationbit 1:1:Enabled. Only apply the optimization during first power-on.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6076,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_TRY_ABNORMAL_LAI_ONCE_MORE,modem_sbp_config[0].SBP_MM_TRY_ABNORMAL_LAI_ONCE_MORE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIf only one PLMN is available and this PLMN was already rejected four times (i.e. attempt counter >=4), the terminal device shall attempt to access the already rejected network once more.bit 0:0:Disable. Do not apply the rule of for Steer of Roaming (Managed Roaming)bit 1:1:Enable. apply the rule of for Steer of Roaming (Managed Roaming)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6077,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_MOBILITY_BAND_PREFERENCE,modem_sbp_config[91].SBP_MOBILITY_BAND_PREFERENCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBand prefer for mobilitybit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6078,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_MOBILITY_WB_MEAS_WO_NVM_CHK,modem_sbp_config[96].SBP_MOBILITY_WB_MEAS_WO_NVM_CHK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBand preference should not check NVRAMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,SBP_MOBILITY_BAND_PREFERENCE,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6079,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_MODE_1_PS_ONLY_LTE_NETWORK_SUPPORT,modem_sbp_config[7].SBP_MODE_1_PS_ONLY_LTE_NETWORK_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport PS only LTE network under voice centric settingbit 0:0:Disabled. Not support to stay at network which does not support CS fallbackbit 1:1:Enabled. Support to stay at network which does not support CS fallback",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6080,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_MP_LTE_DOWNLINK_LAA_r13,modem_sbp_config[103].SBP_MP_LTE_DOWNLINK_LAA_r13,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRel-13 downlink Licensed-Assisted Access(LAA) featurebit 0:0:Disabledbit 1:1:Enabled<BR><BR>If set this flag to 1, LAA will be enabled, if set this flag to 0, LAA will be disabled.<BR><BR>The LAA feature will be supported from Petrus MP3.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,LAA,4G,,,"Test in machine (Y)<BR>Test Time (5 minutes) <BR> [Init]<BR> [Test Step] <BR> [Expected Result]<BR> 1), check the UE-EUTRAN-Capability: downlinkLAA-r13<BR> 2), Insert T-Mobile SIM, LAA capability will be supported<BR> 3), Insert other SIM, LAA capability will not be supported",Untested,,,,
-6081,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_MTC_SUPPORT,modem_sbp_config[8].SBP_MTC_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport machine-type communication.bit 0:0:Disabled. Not support machine-type communicationbit 1:1:Enabled. Support machine-type communication",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6082,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_MT_CSFB_IRAT,modem_sbp_config[88].SBP_MT_CSFB_IRAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSelect 23G when T3417ext timeout for MT CSFBbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,__DISABLE_SBP_MT_CSFB_IRAT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6083,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_NA_PS_PERFORMANCE_ENH,modem_sbp_config[76].SBP_NA_PS_PERFORMANCE_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnhancement for PS performancebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6084,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_NON_PS_SIM_REGISTER_FIRST,modem_sbp_config[73].SBP_NON_PS_SIM_REGISTER_FIRST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNon-PS SIM will preempt PS SIM's RF resource and try to search&register with full RF resourcebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x01",,,,MD Config,Modem - Customer Requirement,,,In Attached File,Pass,,,,
-6085,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_NOTIFY_MBMSAL_E911_EVENT_USING_EMCS,modem_sbp_config[79].SBP_NOTIFY_MBMSAL_E911_EVENT_USING_EMCS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]<BR>Configuration of SBP FeatureNotify Emergency callback session to MBMSAL through AT+EMCS.<BR><BR>bit:0: disable. AT+EMCS would not notify MBMSAL about the event of emergency callback session.<BR>bit:1: enable. AT+EMCS would notify MBMSAL about the event of emergency call back session so that it could do corresponding actions.",BIT,1,,1,0x0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x1,,,,(VzW) E911,OP Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes)<BR>[Init] <BR>Make an E911 call while consuming a eMBMS stream.<BR>Perform "30. E911 Interaction VZ_TC_eMBMSIOT_7422"<BR><BR>[Test Step] <BR>1. Select a stream service after eMBMS APP display the service<BR>2. After 1 min of the stream start, use the DUT to originate an E911 call<BR>3. Bring the eMBMS app to foreground<BR>4. Bring the E911 call to foreground, then end the E911 call.<BR>5. Bring back the resident application and select a streaming<BR>6. Stop the stream<BR><BR>[Expected Result]<BR>After step 1, the app start playing streaming<BR>After step 2, The E911 call goes through, The Resident app displays "Out of Coverage" in the log tab<BR>After step 3, Veirfy eMBMS stream session has been stopped running<BR>After step 4, The E911 call ends<BR>After step 5, the app start playing streaming<BR>After step 6, The stream stops",Pass,,,,
-6086,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_NOT_CHANGE_REJECT_CAUSE_0_TO_111,modem_sbp_config[102].SBP_NOT_CHANGE_REJECT_CAUSE_0_TO_111,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDon't change reject cause 0 to 111bit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_NOT_CHANGE_REJECT_CAUSE_0_TO_111__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6087,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_NOT_CLEAR_ATT_ATTEMPT_CNT_IN_E2C,modem_sbp_config[80].SBP_NOT_CLEAR_ATT_ATTEMPT_CNT_IN_E2C,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDon't clear attach attempt counter during inter-RAT from C2K to LTEbit 0:0:Not clearbit 1:1:Clear",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Don't clear attach attempt counter during inter-RAT from C2K to LTE<BR>0:Clear attach attempt counter during inter-RAT from C2K to LTE,,,__SBP_NOT_CLEAR_ATT_ATTEMPT_CNT_IN_E2C__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6088,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_NOT_PREFER_HPLMNWACT_INFO,modem_sbp_config[26].SBP_NOT_PREFER_HPLMNWACT_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot prefer to use EF-HPLMNwACT info received from SIM/USIMbit 0:0:Turn-off. Use EF-HPLMNwACT infobit 1:1:Turn-on. Not use EF-HPLMNwACT info",BIT,1,,1,DEFAULT_VALUE : 0 <BR>__NOT_PREFER_HPLMNWACT_INFO__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6089,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_NOT_REPORT_IMS_UL_DATA_STATUS,modem_sbp_config[23].SBP_NOT_REPORT_IMS_UL_DATA_STATUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not report UL Data Status for IMS PDNbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Do not Report UL data status for IMS PDN<BR>0:Report UL data status for IMS PDN,,,,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6090,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_NOT_SEARCH_IMMEDIATE_IF_FIRST_FOUND_NON_HPPLMN,modem_sbp_config[80].SBP_NOT_SEARCH_IMMEDIATE_IF_FIRST_FOUND_NON_HPPLMN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurenon-support search based on PLMN FOUND IND if first PLMN FOUND is not high prioritybit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6091,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_NOT_TRIGGER_AUTO_RESELECTION_WHEN_SET_AUTO_MODE_FROM_MANUAL_MODE,modem_sbp_config[85].SBP_NOT_TRIGGER_AUTO_RESELECTION_WHEN_SET_AUTO_MODE_FROM_MANUAL_MODE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl if trigger auto-reselection when set auto mode from manual modebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6092,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_NO_3G_FULL_BAND_SEARCH_DURING_23G_REDIR,modem_sbp_config[57].SBP_NO_3G_FULL_BAND_SEARCH_DURING_23G_REDIR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] his feature enables UE to avoid 3G<BR>fullband search during 2G to 3G redirection",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6093,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_NO_3G_FULL_BAND_SEARCH_DURING_CSFB_REDIR,modem_sbp_config[40].SBP_NO_3G_FULL_BAND_SEARCH_DURING_CSFB_REDIR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to not perform 3G full band search during CSFB redirection",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6094,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_NO_CHANGERAT_RETRY_FOR_EMERGENCY_CALL_REJECT,modem_sbp_config[55].SBP_NO_CHANGERAT_RETRY_FOR_EMERGENCY_CALL_REJECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable change RAT retry for non emergency call number dialled as a emergency callbit 0:0:Enable change RAT retry for non emergency call number dialled as a emergency callbit 1:1:Disable change RAT retry for non emergency call number dialled as a emergency call",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6095,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_NO_COLDRESET_AFTER_CDMA_DETECT,modem_sbp_config[40].SBP_NO_COLDRESET_AFTER_CDMA_DETECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This item is replaced by SBP_NO_COLDRESET_AFTER_CDMA_DETECTbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6096,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_NO_OPTIONAL_RAU_AFTER_CCO_FAILURE,modem_sbp_config[7].SBP_NO_OPTIONAL_RAU_AFTER_CCO_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNo optional RAU after CCO failurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:UE shall perform RAU after resumption of PS session post Inter-RAT cell change failure<BR>0x1:UE shall not perform RAU after resumption of PS session post Inter-RAT cell change failure,,,__TMO_NO_OPTIONAL_RAU_AFTER_CCO_FAILURE__,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6097,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_NO_RECOVERY_WHEN_CSINVALID_ON_NONDATASIM_WHEN_IN_VIDLE,modem_sbp_config[82].SBP_NO_RECOVERY_WHEN_CSINVALID_ON_NONDATASIM_WHEN_IN_VIDLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDon't perform recovery search for non-data sim and CS sim is invalid when in virtual idle modebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6098,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_NO_SR_TRIGGERED_TAU_DURING_T3411,modem_sbp_config[70].SBP_NO_SR_TRIGGERED_TAU_DURING_T3411,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot allow immediate TAU triggered by SR if T3411 is runningbit 0:0:Allowbit 1:1:Not allow",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,__NO_SR_TRIGGERED_TAU_DURING_T3411__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6099,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_NO_SUPPORT_A5_3,modem_sbp_config[4].SBP_NO_SUPPORT_A5_3,OTA and OTA BY OP,no,no,no,yes,"The A5/3 algorithm is one of cipher modes used in GSM after the MS enters dedicated state and starts ciphering. <BR> If the MS support A5/3 algorithm, it will report its capability on the CLASSMARK to the network and the network may request the MS to start ciphering using A5/3.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:A5_3support is disabled<BR>0:A5_3 support is enabled,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6100,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_NR_DELAY_BUDGET_REPORTING,modem_sbp_config[103].SBP_NR_DELAY_BUDGET_REPORTING,OTA and OTA BY OP,no,no,no,yes,Configuration of SBP Feature NR Delay Budget Reporting,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,Option 2,5G Architecture,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF Dump,Pass,,,,
-6101,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_NR_OVERHEATING_ASSISTANCE,modem_sbp_config[104].SBP_NR_OVERHEATING_ASSISTANCE,OTA and OTA BY OP,no,no,no,yes,Configuration of SBP Feature NR Overheating Assistance information,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,Option 2,5G Architecture,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF Dump,Pass,,,,
-6102,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_NR_SRS_TX_SWITCH,modem_sbp_config[103].SBP_NR_SRS_TX_SWITCH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature NR SRS tx(antenna) switch<BR>0: Not supported<BR>1: Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SRS Tx Antenna Switch,MIMO,,,Not required since MP1 feature will not use SBP.,Untested,,,,
-6103,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_NVRAM_MAP_EMM_CAUSE,modem_sbp_config[88].SBP_NVRAM_MAP_EMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReject cause mapping by NVRAMbit 0:0:Disable. Follow spec reject cause handlingbit 1:1:Enabled. User can map network reject cause to other reject cause that user want.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. User can map network reject cause to other reject cause that user want.<BR>0:Disable. Follow spec reject cause handling.,,,__SBP_NVRAM_MAP_EMM_CAUSE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6104,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature Enable to map MM/GMM reject cause to new cause from NVRAM record configured by customerbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"{0x0000 ~0x8000}:mm_msg :: MM/GMM OTA message type applied the reject cause conversion.<BR>{0x00 ~0x0a}:mm_cause :The reject cause was received from the network.<BR>{0x00 ~0xff}:new_cause_on_hplmn:The new reject cause for HPLMN<BR>0xff:reserve1:The field is reserved for the future needs<BR>{0x0~0xf],{0x0~0xf},{0x0~0xf}:camp_on_plmn:The camped PLMN which sent the reject cause.<BR>{0x0-0xf},[0x0-0xf},{{0xf-0xf}:sim_plmn:The PLMN ID derived from IMSI.<BR>0xf:reserve2:The field is reserved for the future needs<BR>{ 0x0~0xff }:reserve3:The field is reserved for the future needs<BR>{0~99} {111}:new_cause_on_vplmn : The new reject cause for VPLMN",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Configure NVRAM_EF_MM_GMM_REJECT_CAUSE_MAPPING_LID to {2561,7,[0x20,0x60,0x1f],[255,255,255],255,255,255,111,14},<BR><BR> Boot up the device & UE send attach request in 23G.<BR> [Test Step]<BR> Network send attach reject with cause #7. <BR> <BR> [Expected Result]<BR> UE is expected toconvert cause #7 to cause #14 & GPRS remain in service.",Pass,,,,
-6105,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_NWSEL_BACKUP_RPLMN_IN_AUTO_MODE,modem_sbp_config[16].SBP_NWSEL_BACKUP_RPLMN_IN_AUTO_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThe UE backups previous RPLMN when receiving network reject or abnormal cases.bit 0:0:Turn-off. Not backup previous RPLMNbit 1:1:Turn-on. Backup previous RPLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6106,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_NWSEL_CUSTOMIZE_EHPLMN,modem_sbp_config[34].SBP_NWSEL_CUSTOMIZE_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNWSEL uses customized EHPLMN for network selection.bit 0:0:Turn-off. Do not use customized EHPLMNbit 1:1:Turn-on. Use customized EHPLMN for network selection",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6107,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_NWSEL_DISABLE_STORED_RPLMN_FROM_NVRAM,modem_sbp_config[73].SBP_NWSEL_DISABLE_STORED_RPLMN_FROM_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable to use stored registered PLMN from NVRAM for manual selection modebit 0:0:Turn-off. Use stored RPLMN from NVRAMbit 1:1:Turn-on. Not use stored RPLMN from NVRAM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6108,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_NWSEL_DO_NOT_SEARCH_NEXT_FOR_REJ_12,modem_sbp_config[25].SBP_NWSEL_DO_NOT_SEARCH_NEXT_FOR_REJ_12,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not perform next PLMN + RAT search for reject cause #12bit 0:0:Turn-off. Perform next PLMN/RAT search for #12bit 1:1:Turn-on. Not perform next PLMN/RAT search for #12",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6109,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_NWSEL_EARLY_AVAILABLE_PLMN_SEARCH,modem_sbp_config[99].SBP_NWSEL_EARLY_AVAILABLE_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSearch available PLMNs found before fullband scan is finishedbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5937,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_GEMINI_LG_WG_MODE,modem_sbp_config[40].SBP_GEMINI_LG_WG_MODE,OTA,no,no,no,yes,"For WCDMA gemini project, in current MTK design, if TDSCDMA is enabled for CMCC SIM in China, then WCDMA must be turned off for all SIM slots. Such behavior will cause UE can only provide GSM capability if user is also using CU SIM.<BR>This feature provide an alternative solution which will switch UE from LTE/TDSCDMA/GSM mode to LTE/GSM mode for CMCC SIM and let CU SIM can use WCDMA in China.<BR>IMPORTANT NOTICE: UMOLYA provide a new feature which can let UE support LTE/TDSCDMA/GSM(CMCC)+WCDMA/GSM(CU), please see SBP_T_PLUS_W part for detail.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,Do not enable SBP_GEMINI_LG_WG_MODE if SBP_T_PLUS_W is enabled.User could use compile option __GEMINI_LG_WG_MODE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5938,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE,modem_sbp_config[36].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, On NW initiated PS detach for causes other than #2,8,3,6,7,11,12,13,14,15,25, UE shall perform PS re-attach immediately.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:UE shall not re-attach immediately after performing Network Initiated GPRS detach(for causes other than m<BR>1:If this feature is enabled, On NW initiated PS detach for causes other than #2,8,3,6,7,11,12,13,14,15,25, UE shall perform PS re-attach immediately.",,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5939,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_GMM_TMSI_BASED_NRI_CONTAINER,modem_sbp_config[16].SBP_GMM_TMSI_BASED_NRI_CONTAINER,OTA and OTA BY OP,no,no,no,yes,"UE with valid TMSI performing Combined RAU/Attach Procedure, TMSI based NRI container IE shall be included as part of Combined ATTACH/RAU Peer message.<BR>The purpose of the TMSI based NRI container information element is to allow the VLR to determine whether the MS has performed inter VLR mobility or intra VLR mobility when the VLR holds a current registration of the UE that could also exists at another VLR.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If this SBP is disable, UE does not contain TMSI based NRI container in combined ATTACH.RAU peer message.<BR>1:If this SBP is enable, UE contains TMSI based NRI container in combined ATTACH/RAU peer message .",,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+5940,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_GMSS_EARLY_CONTROL_LIMITED_SEARCH,modem_sbp_config[61].SBP_GMSS_EARLY_CONTROL_LIMITED_SEARCH,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to let GMSS early control 3GPP/3GPP2 limited service when no SIM inserted or PIN lock in the protocol 1. Once 3GPP or 3GPP2 limited service is found, the other side will stop searching for saving power consumption.<BR>When this SBP is enabled, once 3GPP or 3GPP2 limited service is found, the other side will stop serching.<BR>When this SBP is disabled, 3GPP/3GPP2 will keep searching for limited service even the other side has limited service.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,"if compile option __DISABLE_GMSS_EARLY_CONTROL_LIMITED_SEARCH__ is not defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+5941,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_GMSS_REUSE_3GPP_RPLMN_MCC,modem_sbp_config[32].SBP_GMSS_REUSE_3GPP_RPLMN_MCC,OTA and OTA BY OP,no,no,no,yes,"Before running multimode system selection for 3GPP and 3GPP2 access technology, UE need to know at least MCC information in current region. However, MCC search procedure takes time and may downgrade overall system selection performance. So this feature can let UE reuse MCC information from RPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,The setting of this SBP could be set to "enable" by defining compile option __GMSS_REUSE_3GPP_RPLMN_MCC__ in the makefile,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5942,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_GMSS_SPRINT_HANDLING,modem_sbp_config[73].SBP_GMSS_SPRINT_HANDLING,OTA and OTA BY OP,no,no,no,yes,This SBP is for GMSS module to check whether Sprint specific behavior shall be performed.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,N/A,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+5943,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_BDS,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_BDS,OTA and OTA BY OP,no,no,no,yes,"For the NW could not accept UE reports Galileo capability, user can disable BDS capability by this SBP.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5944,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GALILEO,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GALILEO,OTA and OTA BY OP,no,no,no,yes,"For the NW could not accept UE reports Galileo capability, user can disable Galileo capability by this SBP.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5945,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GLONASS,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GLONASS,OTA and OTA BY OP,no,no,no,yes,"For the NW could not accept UE reports Galileo capability, user can disable GLONASS capability by this SBP.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5946,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GPS_DUAL_FREQ,modem_sbp_config[100].SBP_GNSS_CAPABILITY_REPORT_GPS_DUAL_FREQ,OTA and OTA BY OP,no,no,no,yes,"For the NW could not accept UE reports GPS dual-frequency capability, user can disable GPS dual-frequency capability by this SBP.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5947,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_GSMA_NETWORK_ACCESS_CONTROL,modem_sbp_config[11].SBP_GSMA_NETWORK_ACCESS_CONTROL,OTA and OTA BY OP,no,no,no,yes,"GSMA new requirement on reject cause #13 and #15. With #13, the UE originally searches next PLMN/RAT, and with #15, it searches the same PLMN/RAT. After turn-on this SBP, with #13 the UE searches next PLMN, and with #15 it searches the next PLMN/RAT.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __GSMA_NETWORK_ACCESS_CONTROL__. If SBP_GSMA_NETWORK_ACCESS_CONTROL and SBP_ROAMING_NOT_ALLOW_AS_NO_SUITABLE are turned-on simultaneously. Only SBP_GSMA_NETWORK_ACCESS_CONTROL is applied.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5948,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_GSM_NO_SI13_CAMP_ON_CS_ONLY,modem_sbp_config[69].SBP_GSM_NO_SI13_CAMP_ON_CS_ONLY,Not Support,no,no,no,yes,"In some network, the GSM cells inform in SI3/SI4 that GPRS is supported but no SI13 broadcasted, according to 3GPP spec we will not camp on those cells. This feature is for customer to control whether UE will camp on those GSM cells for CS service only.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,Feature could be enabled by enabling compiler option __GSM_NO_SI13_CAMP_ON_CS_ONLY__.,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+5949,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_HPLMN_REJ_CAUSE_7_8_MAPPING_TO_15,modem_sbp_config[56].SBP_HPLMN_REJ_CAUSE_7_8_MAPPING_TO_15,OTA and OTA BY OP,no,no,no,yes,"For some operators, if the USIM card or its service package does not have LTE service, the network will reject UE's registration with reject cause #7 or #8. According to TS 24.301, UE will in no service in 2G, 3G, and 4G until power off or SIM removal. However, this kind of USIM card may have normal service in 2/3G.<BR>MTK provides workaround solution. If this SBP is enabled and UE receives reject cause #7 or #8 in home network (real network), UE will mapping to cause #15 and follow the #15 handling. In this way, UE at least can get normal service in 2G/3G. One more reminder is that this feature is only applied in real network and not applied if inserting test sim. Verifying reject cause #7 or #8 behavior is very common for IOT or GCF cases. To prevent the IOT/GCF cases failure, MTK will keep following the spec behavior if inserting test sim.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Reject cause mapping #7 or #8 to #15 and follow #15 handling in roaming PLMN.<BR>0:Disable. Follow spec #7/#8 handling.,,,User could use compile option __LTE_REJ_7_8_MAPPING_TO_15_HPLMN_ALSO__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5950,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_HPPLMN_REGARDLESS_ANY_MCC,modem_sbp_config[2].SBP_HPPLMN_REGARDLESS_ANY_MCC,OTA and OTA BY OP,no,no,no,yes,This SBP allows UE to perform background search to higher priority PLMNs without MCC restriction(see 23.122).,BIT,1,,1,DEFAULT_VALUE :0 <BR>__HPPLMN_REGARDLESS_ANY_MCC__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __HPPLMN_REGARDLESS_ANY_MCC__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5951,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_HPUE,modem_sbp_config[41].SBP_HPUE,OTA and OTA BY OP,no,no,no,yes,"High Power UE. This feature is used to control if UE supports LTE HPUE Feature.<BR>- If this feature enabled, UE will support power class 2(high power) for band 41 and power class 3 for other bands.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,"This feature is controlled by __ENABLE_HPUE_FOR_ALL__.<BR>If user enable this compile option, it will enable HPUE for all operator.<BR>If user want to enable HPUE by specific operator, please refer http://wiki.mediatek.inc/display/LTECAPABILITY/How+to+enable+HPUE.",Power Class,HPUE,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5952,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_HSR_ENHANCE,modem_sbp_config[32].SBP_HSR_ENHANCE,OTA and OTA BY OP,no,no,no,yes,This is an enhancement designed for High Speed Rail mobile communication. This feature is used to let UE camp on 4G high speed cell easily.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enabled,,,N/A,High Speed Train (HST),MTK Proprietary,,,"Test in machine (Y/N): N<BR>Test Time (minutes): Could be more than 1 hour<BR>[Init]<BR>1. Go to China High Speed Train route<BR>2. Insert CMCC SIM card<BR>3. Use SBP default value<BR>4. Perform CMCC HST field trial test case<BR>[Test Step]<BR>1. Use MCF tool to turn on and off this switch<BR>2. Perform CMCC field trial High Speed Train (HST) test, dedicated network attachment period (ratio) test case.<BR>[Expected Result]<BR>1. When it's OFF, UE could fail to pass HST dedicated network attachment period (ratio) test.<BR>2. When it's ON, UE shall pass HST dedicated network attachment period (ratio) test.",Pass,,,,
+5953,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_HST_VOLTE_ENH,modem_sbp_config[62].SBP_HST_VOLTE_ENH,OTA and OTA BY OP,no,no,no,yes,"When this SBP is turn on, the UE would have better VoLTE quality in High speed train.<BR>- The UE HO success rate will be improved in High speed train.<BR>- The UE HO to 2/3G rate will be reduced in High speed train.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE apply VoLTE quality enhancement in High speed train<BR>0:UE does not apply VoLTE quality enhancement in High speed train,,,N/A,IMS,IMS,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5954,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_HVOLTE_ENABLE,modem_sbp_config[28].SBP_HVOLTE_ENABLE,OTA and OTA BY OP,no,no,no,yes,To enable hybrid VoLTE feature.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,(VzW) hVoLTE,OP Requirement,,,,Pass,,,,
+5955,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_IDC_IGNORE_BT_FOR_TEST_SIM,modem_sbp_config[66].SBP_IDC_IGNORE_BT_FOR_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,This SBP is used to decide if taking BT's coexistence issue into consideration<BR>- If this SBP is ON : Ignore BT's coexistence issue when test sim is inserted<BR>- If this SBP is OFF : Do not ignore BT's coexistence issue when test sim is inserted,BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,N/A,MD Config,Modem - Customer Requirement,,,"MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[66] -> SBP_IDC_IGNORE_BT_FOR_TEST_SIM<BR><BR>PS Intergrate Trace => "[L1][IDC] isBypassBt(): sbp_config_ingore BT =%d, test sim flag =%d "<BR>=> (check: sbp_config_ingore BT )",Pass,,,,
+5956,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_IGNORE_4G_PWS_DUP_CHECK,modem_sbp_config[77].SBP_IGNORE_4G_PWS_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"Allow user to manually disable the PWS duplication detection mechanism.<BR>By setting this SBP to TRUE, UE will always display each message received without Duplication detection check.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Disable, still check PWS duplication.<BR>1:Enable, not check PWS duplication detection.",,,"if compile option __IGNORE_4G_PWS_DUP_CHECK__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5957,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_IGNORE_EFSMSP_PARAM_IND_FOR_SMSC,modem_sbp_config[66].SBP_IGNORE_EFSMSP_PARAM_IND_FOR_SMSC,OTA and OTA BY OP,no,no,no,yes,"It has been seen that for some faulty SIM card in file EFsmsp, the Service Center Address is present but even though the parameter indicator says that the SCA is not present. Due to this when any such SIM card is inserted to the DUT the MO SMS will fail.<BR><BR>When this SBP is enabled we read the SCA from the EFsmsp irrespective of the value in parameter indicator.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,"if compile option __IGNORE_EFSMSP_PARAM_IND_FOR_SMSC__ is defined, the SBP is enabled",,,,,,Pass,,,,
+5958,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_IGNORE_INT_CHECK_FOR_NAS_MSG,modem_sbp_config[59].SBP_IGNORE_INT_CHECK_FOR_NAS_MSG,OTA and OTA BY OP,no,no,no,yes,"From previous FT experiences, the Downlink NAS count in NAS message in some cities will reverse. For example, the network sends consecutive 3 NAS messages, and its Downlink NAS count are X, X+2, X+1.For the first two message(DL count X and X+2), UE can decode successfully and after that UE's latest downlink NAS count is X+2. Then, if UE receives the third NAS message(DL count X+1), UE will think this message is wrapped around because X+1 is less than X+2, and UE uses the wrapped around count to check integrity. If the network just sends the wrong order DL NAS count message, then this NAS message will integrity check fail because this is not wrapped around NAS message and discard this message according TS 24.301. If this message is ACTIVATE_DEDICATED_EPS_BEARER_CONTEXT_REQUEST which maybe be for video call, it will cause the video call fail. This kind of issue is network issue and ever happen in CMCC, T-Mobile, and Beeline.<BR>MTK provide a workaround solution for this issue. If this SBP is enabled and the current message integrity check fail, UE will re-check again integirty using not wrapped around count. If the re-check is pass and this message is one of the NAS messages(ACTIVATE_DEDICATED_EPS_BEARER_CONTEXT_REQUEST/ ESM_INFORMATION_REQUEST/MODIFY_EPS_BEARER_CONTEXT_REQUEST/ATTACH_ACCEPT/IDENTITY_REQ), UE will still process this message. If the re-check is pass but this message is not one of the above NAS messages, UE will still discard this message because this message should not happen.<BR>Because this workaround solution violates 3GPP spec TS24.301, we do not apply for all the world.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Check NAS message again if integrity check failure.<BR>0:Disable. Discard NAS message if integrity check failure.,,,User could use compile option __IGNORE_INT_CHECK_FOR_NAS_MSG__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5959,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_IGNORE_PLMN_CHANGE_FOR_MANUAL_MODE,modem_sbp_config[7].SBP_IGNORE_PLMN_CHANGE_FOR_MANUAL_MODE,OTA and OTA BY OP,no,no,no,yes,SIM may send a REFRESH SIM Initialization and File Change Notification command. This command triggers a change of PLMN (modifies RPLMN information in EF_LOCI/EF_PSLOCI/EF_EPS_LOCI) so the device will change to other network.This SBP is to ignore the change of PLMN when the device is set in Manual network search mode. The device will stay in selected PLMN even if the SIM card sends a Refresh command to trigger the change back to the preferred PLMN.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __IGNORE_PLMN_CHANGE_FOR_MANUAL_MODE__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5960,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_IGNORE_RAI_WHEN_NW_NOT_INCLUDE_BOT,modem_sbp_config[58].SBP_IGNORE_RAI_WHEN_NW_NOT_INCLUDE_BOT,OTA and OTA BY OP,no,no,no,yes,"This SBP controls whether to follow the back-off mechanism in TS 24.301 and TS 24.008 regarding the aspect:<BR>If the Back-off timer value IE is not included and the PDN CONNECTIVITY REQUEST was sent standalone, the UE shall ignore the Re-attempt indicator IE provided by the network in PDN CONNECTIVITY REJECT, if any.<BR>If the SBP is on, the UE does ignore the Re-attempt indicator in the above scenario. If the SBP is off, the UE can take the Re-attempt indicator into account in some cases (e.g., NW does not include Back-off timer IE but include Re-attempt indicator IE in SM/ESM reject message for SM/ESM cause #8/#27/#32/#33). This measns that the network can control UE retry restriction in these cases by including Re-attempt indicator.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+5961,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[89].SBP_IGNORE_REDIR_DEDI_GERAN,modem_sbp_config[89].SBP_IGNORE_REDIR_DEDI_GERAN,OTA and OTA BY OP,no,no,no,yes,"UE will ignore redirect or dedicated priority to GERAN when <BR>1.AS SMC inactivated <BR>2.NW allow or not allow UE redirect to GERAN with AS SMC is not activated (the policy is included in Attach accept and TAU accept)<BR><BR>We set this SBP default off due to:<BR><BR>If NW did not upgrade to support this feature, but UE has been upgraded. <BR>UE and NW will not sync in the following scenario:<BR><BR>Because NW will not bring the policy toward UE due to unsupported feature.<BR>UE regard the policy is not allowed<BR><BR>When receiving RRC Release with redirection to 2G, UE will ignore the redirection.<BR>However, NW may send paging through 2G because it expect UE is in 2G instead of 4G.<BR>But UE still camp on 4G so the paging will be missed.<BR><BR>We think this feature may need some improvement. <BR>In addition, the feature is not common supported by operator, so we decide to disable the SBP first.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,NA,,,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Receive release with redirection info for 2G<BR> [Expected Result]<BR>Ignore redirection,Pass,,,,
+5962,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_IMCSMS_RETRY_FOR_202_REV_OR_NOT,modem_sbp_config[32].SBP_IMCSMS_RETRY_FOR_202_REV_OR_NOT,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
+5963,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_IMEI_LOCK_SUPPORT,modem_sbp_config[4].SBP_IMEI_LOCK_SUPPORT,OTA,no,no,no,yes,"This feature is to control the verification of IMEI before camping on network.<BR>If IMEI verification by SIM fails, UE is not allowed to camp on network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __IMEI_LOCK_SUPPORT__.,,,,,covered by SBP framework UT/IT result,Pass,,,,
+5964,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,modem_sbp_config[67].SBP_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE,OTA and OTA BY OP,no,no,no,yes,"This SBP is not a spec directive. This SBP shall help to immediate retry of SM PDP activation or deactivation after SM is resumed from full stack suspension and also improve pdp activation or deactivation retry on lower layer failures. When enabled, the device shall perform immediate SM PDP activation or deactivation retry when SM is resumed from full stack suspension and shall not wait for default 8 secs timer to expire. In addition, In case of lower layer failures, the PDP activation or deactivation retry shall be faster instead of default 8 secs retry.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Improve PDP act and deact retry performance on full stack suspend and lower layer failures<BR>0:PDP act and deact retry performance shall not be applied on full stack suspend and lower layer failures,,,"To disable this feature, compile option __DISABLE_IMPROVED_PDP_ACT_DEACT_RETRY_PERFORMANCE__ must be defined.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 5 mins <BR>[Init] DUT boot up with dual SIM inserted and mobile data enabled.<BR>[Test Step] <BR>1) DUT register to PS services in 2G/3G<BR>2) Verity DU perform PDP activation successfully,Pass,,,,
+5965,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,modem_sbp_config[82].SBP_IMSI_GPRS_DETACH_RETRY,OTA and OTA BY OP,no,no,no,yes,"In case of IMSI detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked and GPRS detach(due to power off) failure with lower layer cause DC_Status_RLC_Release_Tx_Not_Acked or DC_Status_RLC_Release_Discard,IMSI/GPRS detach is aborted and local detach is performed. This leads unsync between UE and network.<BR><BR>If this SBP is enabled, IMSI and GPRS detach(due to power off) procedure will be retried in the case of lower layer failure with above mentioned causes. IMSI/GPRS detach(due to power off) retry is limited to 8sec after which UE local detach will be performed.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If Disable, IMSI and GPRS detach will not be re-tried.<BR>0x1:If Enable, IMSI and GPRS detach will be re-tried",,,"To enable this feature, compilation option __MM_IMSI_GPRS_DETACH_RETRY__ need to be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR>Test Time (minutes) : 10 mins <BR>[Init] : UE is expected to register to 23G network for both CS-PS domain. <BR>[Test Step]<BR>1. Perform Detach <BR>2. UE cannot send DETACH_REQ to Network as RLC ACK for Detach fails because of lower layer failure.<BR><BR>[Expected Result]<BR> UE is expected to perform Detach request again,Pass,,,,
+5966,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_IMSI_PAGING_ATTACK_HANDLING,modem_sbp_config[84].SBP_IMSI_PAGING_ATTACK_HANDLING,OTA and OTA BY OP,no,no,no,yes,"Purpose: The handling of UE sends attach_request frequently because of receiving IMSI paging too frequently<BR>Scenario: When we detect UE sends attach_request frequently because of receiving IMSI paging too frequently (the threshold is observe_imsi_paging_count/observe_paging_count), we will temp bar this cell for a short time (observe_imsi_paging_bar_time) because we think this cell is attacking by fake cell (because fake cell sends many IMSI paging and cover the paging from real cell but UE's lower layer can not distinguish it) <BR>Usage:<BR>In NVRAM file, this feature is in NVRAM_EF_ERRC_PERFORMANCE_PARA_LID<BR>This feature has 3 configured setting:<BR>1.observe_ueid_paging_count: default value is 10 (max:32)<BR>2.observe_my_imsi_paging_count: default value is 8 (max:32)<BR>ex: the threshold is observe_imsi_paging_count/observe_paging_count = 8/10 = 80%. Meaning: if UE receives 80% pagins is IMSI paging, we treat this cell may be attacked by imsi paging from fake cell, so temp bar this real cell<BR>3.observe_imsi_paging_bar_time: default value is 300s",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the handling of IMSI paging attack.<BR>0:Disable the handling of IMSI paging attack.,,,This feature is controlled by __ENABLE_SBP_IMSI_PAGING_ATTACK_HANDLING__.,Anti Fake Cell,OP Requirement,,,,Pass,,,,
+5967,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_INACTIVE_MODE_SERVICE_RECOVERY,modem_sbp_config[102].SBP_INACTIVE_MODE_SERVICE_RECOVERY,OTA and OTA BY OP,no,no,no,yes,Enable inactive mode service recovery feature,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5968,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_INTERROGATE_GROUPS_OF_SS,modem_sbp_config[30].SBP_INTERROGATE_GROUPS_OF_SS,OTA and OTA BY OP,no,no,no,yes,"According to 3GPP Spec TS22.004 subclause 7.2, *#002#, *#004#, *#330#, *#333#, *#353# (Interrogation of groups of Supplementary Services) are not allowed. They shall be treated as USSD.<BR>When this SBP feature is enabled, we will violate above SPEC to process them as SS interrogation. Otherwise we will treat them as USSD operations.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5969,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_INTER_RAT_RSSI_SORTED_SEARCH,modem_sbp_config[86].SBP_INTER_RAT_RSSI_SORTED_SEARCH,OTA and OTA BY OP,no,no,no,yes,Control the inter-rat rssi sorted search feature enable or disable,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5970,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_IRAT_PINGPONG_REDUCTION,modem_sbp_config[94].SBP_IRAT_PINGPONG_REDUCTION,OTA and OTA BY OP,no,no,no,yes,"Frequent RAT change may bring bad user experience due to RAT icon on UI changes in a short time. If the SBP is ON, InterRAT PINGPONG reduction machanism will reduce the InterRAT change caused by unreasonable Network configuration.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, check IRAT PINGPONG status and try to reduce PINGPONG.<BR>0:Disable, not check IRAT PINGPONG status.",,,User could use compile option __IRAT_PINGPONG_REDUCTION__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5971,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_IS_ATT_CONN_REJ,modem_sbp_config[8].SBP_IS_ATT_CONN_REJ,OTA and OTA BY OP,no,no,no,yes,"Apply AT&T cell barring reqirement when ERRC establishment failure:<BR>- Within an AT&T defined interval, when the number of RRCConnectionReject or T300 expiry reaches threshold of AT&T defined max value, current cell will be barred for a while.",BIT,1,,1,__IS_ATT_CONN_REJ__ : 0x01<BR>DEFAULT_VALUE : 0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,default on when with compile option __IS_ATT_CONN_REJ__ or sbp_id is AT&T or Cricket.,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Receive reject *5<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
+5972,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_IS_CONN_PAGING_LOCAL_REL,modem_sbp_config[17].SBP_IS_CONN_PAGING_LOCAL_REL,OTA and OTA BY OP,no,no,no,yes,"Used to trigger Local Release when receiving unexpected PS domain PAGING in LTE CONNECTED mode. <BR>PS PAGING usually triggers UE to enter LTE CONNECTED mode. NW should only send PS domain PAGING to UE when it believes that UE is in LTE IDLE mode.<BR>If UE is already in LTE CONNECTED mode but still receives PS domain PAGING, the UE status between NW and UE may be asynchronous.<BR>With this SBP set to TRUE, UE will go back to LTE IDLE mode after receiving unexpected PS domain PAGING and try to sync the current UE status with NW.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Trigger local RELEASE if receiving CONNECTED mode paging after a configurable timer.<BR>0:Disable. Handle CONNECTED mode paging within a fix timer.,,,User could use compile option __IS_CONN_PAGING_LOCAL_REL__ to switch the setting of this SBP,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5973,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_IS_OP07,modem_sbp_config[11].SBP_IS_OP07,OTA and OTA BY OP,no,no,no,yes,"This SBP feature option is used to support AT&T's miscellaneous features.<BR>By enabling this feature, UE could be compatible with AT&T's network",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,The setting of this SBP could be set to "enable" by defining compile option __IS_OP07__ in the makefile,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+5974,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_IS_OP12,modem_sbp_config[15].SBP_IS_OP12,OTA and OTA BY OP,no,no,no,yes,"This SBP feature option is used to support VzW's general features.<BR>By enabling this feature, UE could be compatible with VzW's network",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,The setting of this SBP could be set to "enable" by defining compile option __IS_OP12__ in the makefile,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+5975,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_KOR_CHANNEL_PRIORITY_STORED_SEARCH,modem_sbp_config[70].SBP_KOR_CHANNEL_PRIORITY_STORED_SEARCH,OTA and OTA BY OP,no,no,no,yes,This SBP feature option is used to enable preferred UARFCNs for stored cell search.,BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This SBP could be enabled by defining compile option __CSE_KOR_CHANNEL_PRIORITY_STORED_SEARCH__ in the makefile,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5976,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_KT_ENABLE_TRANSFER_SS_STATUS,modem_sbp_config[69].SBP_KT_ENABLE_TRANSFER_SS_STATUS,OTA and OTA BY OP,no,no,no,yes,"This feature is for allowing MD transfer other bit information (Registration/Provision) which is not delivered to AP in ss_status as well as Active bit for each basic service when the TE requests to interrogate Call Forwarding supplementary service.<BR>If this feature is enabled, MD sends all content of ss_status (P/R/A/H) bit to AP.<BR>If this feature is disabled, MD sends only Active bit of ss_status to AP.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1<BR>1:enable<BR>0:disable,,,Feature could be enabled by enabling compiler option __KT_ENABLE_TRANSFER_SS_STATUS__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test time (5 minutes)<BR>[Init]<BR>It needs to be tested with AT command.<BR>[Test step]<BR>1. Connect Terminal for sending AT command.<BR>2. Registration/Activation CFU. <BR> AT+ECUSD=1,1,"**21*<FTN>#"<BR>3. Interrogate CFU <BR> AT+ECUSD=1,1,"*#21#"<BR>[Expected Result]<BR><Status vector> +CCFC: <1st param>, <second param>, <FTM>, <numbering plan><BR> 4bit / 3bit / 2bit / 1bit<BR>Quiescent / Provision / Registration / Active<BR>* <1st param>, P and R bits should be enabled as well as A bit when CFU is activated and registered. <BR>It will be 7 when CFU is activated successfully.<BR><BR>(Result example)<BR>+CCFC: 7, 1,"FTN", 145<BR>+CCFC: 7, 8,"FTN", 145<BR>+CCFC: 7, 16,"FTN", 145",Pass,,,,
+5977,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_L2_RANDOM_FILL_BIT,modem_sbp_config[0].SBP_L2_RANDOM_FILL_BIT,OTA and OTA BY OP,no,no,no,yes,"This feature is defined in 3GPP TS44.006 Ch.5.<BR>If a TDMA frame contains a length indicator that has a value less than N201, the frame contains fill bits.<BR>Each fill bit shall be set to a random value when sent by the mobile station. In MTK product, this feature is on by default.<BR>Note, There may be some old networks that could not recognize the random fill patterns.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Ran dom values will be set for L2 fill bits.<BR>0:Fill bits in L2 frame will not set to random values,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+5978,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_LBS_CP_BLACK_NILR,modem_sbp_config[39].SBP_LBS_CP_BLACK_NILR,OTA and OTA BY OP,no,no,no,yes,"In some network environment location server is not deployed properly and NILR is not required feature on the operator.<BR>However, we investigate that it may be some wrongly NILR triggered by NW side. Therefore, we need SBP option to control if UE need to block NILR.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:All NILR operations are blocked<BR>0:The NILR operations are allowed,,,User could use the compile option __LBS_CP_BLACK_NILR__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5979,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_LBS_CP_PLMN_BLACK_LIST,modem_sbp_config[39].SBP_LBS_CP_PLMN_BLACK_LIST,OTA and OTA BY OP,no,no,no,yes,"In some network environment location server is not deployed properly and NILR is not required feature on the operator.<BR>However, we investigate that it may be some wrongly NILR triggered by NW side. Therefore, we need SBP option to control if UE<BR>need to block NILR. To enable this black list, we can control which PLMN we need to block NILR.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:The NILR PLMN black lists are enabled<BR>0:The NILR PLMN black lists are not enabled,,,User could use the compile option __LBS_CP_PLMN_BLACK_LIST__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5980,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LBS_LPP_ACK_REQUESTED_FOR_UL_MSG,modem_sbp_config[83].SBP_LBS_LPP_ACK_REQUESTED_FOR_UL_MSG,OTA and OTA BY OP,no,no,no,yes,"In TS36.355, when device sends a LPP uplink message, device can request LPP acknowledgement message from network. For reducing message traffic, device may not request acknowledgement message from network. This SBP is used to enable/disable if LPP requests ack message for LPP uplink message, including LPP provide location information and LPP request assistance data message.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+5981,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_LBS_LPP_R13_ECID_TDD_RXTX_TIME_DIFF_FEATURE,modem_sbp_config[74].SBP_LBS_LPP_R13_ECID_TDD_RXTX_TIME_DIFF_FEATURE,OTA and OTA BY OP,no,no,no,yes,"This feature is related with LPP UE Rx-Tx time difference measurement report in TDD. When this SBP is enabled, UE will report "ueRxTxSuppTdd" support in LPP capapbilities message and report the UE Rx-Tx time difference measurement results with TDD mapping. When this SBP is disable, UE will not report "ueRxTxSuppTdd" support in LPP capapbilities message and report the UE Rx-Tx time difference measurement results without TDD mapping.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+5982,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_LBS_OTDOA_ADDITIONAL_NBR_CELL_INFO,modem_sbp_config[57].SBP_LBS_OTDOA_ADDITIONAL_NBR_CELL_INFO,Not Support,no,no,no,no,"This SBP is used to enable/disable the feature of OTDOA additional neighbour cells accoring to the section 6.5.1.2 of 3GPP spec.<BR>If the feature is enabled, it means the target device is capable of supporting additional neighbour cells (as indicated by the presence of the IE additionalNeighbourCellInfoList in OTDOA-ProvideCapabilities). The list may contain all cells (up to 3x24 cells)belonging to the same frequency layer.<BR>If the feature is not enabled, it means the target device is not capable of supporting additional neighbour cells (as indicated by the absence of the IE additionalNeighbourCellInfoList in OTDOA-ProvideCapabilities). The set of cells in the OTDOANeighbourCellInfoList is grouped per frequency layer and the same earfcn not appearing in more than one instance of OTDOA-NeighbourFreqInfo.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0/1,,,N/A,MD Config,Modem - Customer Requirement,,,No need to test.,Untested,,,,
+5983,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_LBS_OTDOA_CS_FOR_RSTD,modem_sbp_config[57].SBP_LBS_OTDOA_CS_FOR_RSTD,Not Support,no,no,no,no,"This SBP is used to enable the cell specific reference signal (CSRS) measure for OTDOA RSTD report. <BR>If the feature is enabled,the CSRS measure will also be involoved in OTDOA cell detection.That means if PRS is not transmitted by equipment, CSRS can be taken to detect OTDOA cell.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0/1,,,N/A,MD Config,Modem - Customer Requirement,,,No need to test.,Untested,,,,
+5984,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_LBS_RESPONSE_EARLY_FIX,modem_sbp_config[66].SBP_LBS_RESPONSE_EARLY_FIX,OTA and OTA BY OP,no,no,no,yes,This SBP is used to enable/disable LPP R12 early fix feature<BR>- If this SBP is ON : Enable early fix feature support in LPP<BR>- If this SBP is OFF : Disable early fix feature support in LPP,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+5985,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_LOCATION_BASE_ALT,modem_sbp_config[86].SBP_LOCATION_BASE_ALT,OTA and OTA BY OP,no,no,no,yes,location base search alternative,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+5986,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_LOGGING_RATE_ADJ,modem_sbp_config[87].SBP_LOGGING_RATE_ADJ,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, UE will adjust logging rate according to some re-defined conditions to reduce logging amount.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable ogging rate adjustment<BR>0:disable logging rate adjustment,,,This SBP item is controlled (enabled) by the compile flag __LOGGING_RATE_ADJ__,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+5987,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_LTE_AUTH_REJ_MAPPING_TO_15,modem_sbp_config[35].SBP_LTE_AUTH_REJ_MAPPING_TO_15,OTA and OTA BY OP,no,no,no,yes,"For some NW or USIM card's problem, NW could reject UE's AUTHENTICATION REQ by AUTHENTICATION REJECT message. According to TS 24.301 5.4.2.5, upon receipt of an AUTHENTICATION REJECT message, the USIM shall be considered invalid until switching off the UE or the UICC containing the USIM is removed.<BR>MTK provides a workaround solution. If this SBP is enabled and UE receives AUTH reject from real network, UE will mapping it to cause #15 and follow the #15 handling. In this way, UE at least can get normal service in 2G/3G. One more reminder is that this feature is only applied in real network and not applied if inserting test sim. Verifying AUTH reject behavior is common for IOT or GCF cases. To prevent the IOT/GCF cases failure, MTK will keep following the spec behavior if inserting test sim.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,User could use compile option __SBP_LTE_AUTH_REJ_MAPPING_TO_15__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+5988,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_CA,modem_sbp_config[9].SBP_LTE_CA,OTA and OTA BY OP,no,no,no,yes,"Carrier Aggregation. This feature is used to control if UE supports LTE CA Feature.<BR>- Aggregation of two or more component carriers in order to support wider transmission bandwidths.<BR>- UE will report supported CA combination to network, and network might configure Scell to UE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,This feature will be disabled if makefile containing MT6739.,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5989,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_LTE_CAP_REL_R13,modem_sbp_config[78].SBP_LTE_CAP_REL_R13,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,NO (Phase out),Untested,,,,
+5990,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_LTE_CAP_REL_R14,modem_sbp_config[78].SBP_LTE_CAP_REL_R14,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,NO (Phase out),Untested,,,,
+5991,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LTE_CA_PREFER,modem_sbp_config[83].SBP_LTE_CA_PREFER,OTA and OTA BY OP,no,no,no,yes,This feature is provided as a optimization for modem performance. In MTK design we will select CA cell in high priority when doing cell selection/reselecion. This is to let UE to camp on CA cell in high priority in order to get more physical resource from network.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+5992,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_LTE_CELLSEL_BY_RSRQ,modem_sbp_config[61].SBP_LTE_CELLSEL_BY_RSRQ,OTA and OTA BY OP,no,no,no,no,"This SBP is used to select a best cell by considering RSRP and RSRQ.<BR>When this SBP is enabled, UE will select a best LTE cell by considering RSRP and RSRQ.<BR>When this SBP is disabled, UE will select a best LTE cell by considering RSRP only.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+5993,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_LTE_CELL_RESEL_ENH,modem_sbp_config[60].SBP_LTE_CELL_RESEL_ENH,OTA and OTA BY OP,no,no,no,yes,"When this SBP is turn on, the UE would apply proprietary reselection mechanism and parameters.<BR>- The LTE would stay or reselect to the cell with good radio.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:not enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (minutes) <BR> [Init] <BR> [Test Step] <BR> [Expected Result],Pass,,,,
+5994,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_LTE_COMP_UL,modem_sbp_config[10].SBP_LTE_COMP_UL,OTA and OTA BY OP,no,no,no,yes,UL Coordinated Multi-Point (CoMP) transmission and reception. This feature is used to control if UE supports LTE UL CoMP Feature. <BR>- Uplink coordinated multi-point reception (UL CoMP) let the transmitted signal recepted at multiple separated points in order to improve the link performance.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,N/A,Coordinated Multi-Point Operation for LTE - COMP_LTE_UL (UL CoMP),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5995,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_CONN_ALWAYS_RCV_UE_PCH,modem_sbp_config[18].SBP_LTE_CONN_ALWAYS_RCV_UE_PCH,OTA and OTA BY OP,no,no,no,yes,"According to 3GPP 24.301 5.6.2.3.1, NW sends PAGING to UE in LTE IDLE mode or CS Service Notification to UE in LTE CONNECTED mode to notify UE an incoming call.<BR>However, UE may still receive PAGING in LTE CONNECTED mode due to NW regards UE in LTE IDLE mode and sends PAGING instead of CS Service Notification.<BR>If UE did not handle the PAGING, incoming call may be missing.<BR>Allow short term state-unsync between NW and UE and handles the CS PAGING received even after entering LTE CONNECTED mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Monitor UE PO in CONNECTED mode<BR>0:Disable. Not monitor UE PO when enter CONNECTED mode.,,,user could use compile option __LTE_CONN_ALWAYS_RCV_UE_PCH__ to switch the setting of this SBP,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+5996,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"User can disable band by camp on plmn. These disable bands would not be used when cell search.<BR>There are two lists.<BR>1. positive list: if plmn match, disable the LTE band which is listed in this list.<BR>2. inverted list: if plmn not match any plmn in inverted plmn group, disable the LTE band which is listed in this list.<BR>User should modify nvram NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID to set positive/inverted disable band list.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,This feature can be turned on by __LTE_CUSTOM_DISABLE_BAND_BY_PLMN__ compile option.,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5997,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,modem_sbp_config[93].SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"Let user can disable band by camp on plmn for test sim or test mode. These disable bands would not be used when cell search.<BR>Have two lists.<BR>1. positive list: if plmn match, disable the LTE band which is listed in this list.<BR>2. inverted list: if plmn not match any plmn in inverted plmn group, disable LTE band which is listed in this list.<BR>User should modify nvram NVRAM_EF_ERRC_CUSTOM_DISABLE_BAND_LIST_LID to set positive/inverted disable band list.<BR>If user want to use SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM, user should also enable SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,"This feature can be turn on by __LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM__ compile option. If user want to use SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM, it should also enable SBP_LTE_CUSTOM_DISABLE_BAND_BY_PLMN.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5998,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_LTE_DISABLE_ALL_ROHC_WHEN_VOLTE_OFF,modem_sbp_config[85].SBP_LTE_DISABLE_ALL_ROHC_WHEN_VOLTE_OFF,OTA and OTA BY OP,no,no,no,yes,"If volte function is set off from user interface and this SBP is enabled, all ROHC profiles from NVRAM are set disabled and not reported to Network.<BR>ROHC profiles is in the NVRAM_EF_UE_EUTRA_CAP_CSFB_LID pdcp_param/rohc_profile[0~8].",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:enabled ==> If volte off, disable all rohc profile. if volte on, according nvram.<BR>0:disable",,,"If define __LTE_DISABLE_ALL_ROHC_WHEN_VOLTE_OFF__, this sbp value would be 1.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+5999,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_LTE_DISABLE_BW,modem_sbp_config[27].SBP_LTE_DISABLE_BW,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to disable the LTE channel bandwidth on certain band. When this SBP is enabled and specific channel bandwidth is set to 1 on a certain band, the UE doesn't support the corresponding comination of that band and bandwidth. By default, this SBP is disable and the default setting of the band/bandwidth combinations are all 0.<BR><BR>The combination of band and bandwidth is configured in NVRAM_EF_LTE_CAP_LID. Byte[4](5th byte) is the bandwidth bitmap of band 1, byte[5](6th byte) is the bandwidth bitmap of band 2, and so on. There are 256 bands supported on UMOLY/UMOLYA and 64 bands supported on MOLY.<BR><BR>The following shows the Bandwidth[MHz] of corresponding bitmap<BR>- bit 0: 1.4<BR>- bit 1: 3<BR>- bit 2: 5<BR>- bit 3: 10<BR>- bit 4: 15<BR>- bit 5: 20<BR>- bit 6~7: N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6000,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_LTE_DISABLE_ENH_CELLSEL,modem_sbp_config[34].SBP_LTE_DISABLE_ENH_CELLSEL,OTA and OTA BY OP,no,no,no,no,"This SBP is used to disable LTE barred cell improvement for cell selection.<BR>If SIB1 of LTE cell is indicated that this LTE cell is barred or reserved, UE cannot camp on it.<BR>When this SBP is enabled, UE will bar this LTE cell without trying it for a while. After barred timer expires, UE will try this LTE cell again.<BR>When this SBP is disabled, UE will keep to try this LTE cell. If SIB1 is changed and the cell becomes suitable, UE will camp on it immediately.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:disable<BR>0:not disable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6001,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_LTE_DISABLE_SINGLE_BAND_WW_FILTER,modem_sbp_config[102].SBP_LTE_DISABLE_SINGLE_BAND_WW_FILTER,OTA and OTA BY OP,no,no,no,yes,"In current MTK design, UE's single bands and CA combinations capability will be filtered by World Wide LTE band exce (custom_wwltedb)l, if band number X is not configured in excel, then UE won't report band X in single bands and CA combinations capability.<BR>In order to decrease the influence of inappropriate configs in World Wide LTE band excel (custom_wwltedb), this SBP makes UE single band capability won't be filtered by the excel, only CA combinations will be filtered by the excel.<BR>This SBP is set default ON, if want to close this SBP, need to add compile option __ENABLE_SINGLE_BAND_WW_FILTER__",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,"If define __ENABLE_SINGLE_BAND_WW_FILTER__ in make file, the SBP value will set to 0. Otherwise, the SBP default value is 1.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6002,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_LTE_DL_MIMO_DISABLE,modem_sbp_config[77].SBP_LTE_DL_MIMO_DISABLE,Not Support,no,no,no,yes,This SBP disable DL 4x4 or 8x8 MIMO for test when the UE support 4X4 or 8x8 MIMO.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Obsolete,,,N/A,MD Config,Modem - Customer Requirement,,,NO (Phase out),Untested,,,,
+6003,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_LTE_DYNAMIC_DISABLE_CA_BY_PLMN,modem_sbp_config[80].SBP_LTE_DYNAMIC_DISABLE_CA_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to customize the CA capability in UECapabilityInformation by serving PLMN. Once user enables this SBP and configures specific PLMNs in table - CUSTOM_CA_DISABLE_PLMN_LIST, the CA capability isn't reported to NW under those PLMN. The CUSTOM_CA_DISABLE_PLMN_LIST is in file custom_eas_config.c.",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,The setting of this SBP could be set to "enable" by defining compile option __LTE_DYNAMIC_DISABLE_CA_BY_PLMN__ in the makefile,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6004,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_LTE_DYNAMIC_DOWNGRADE_CAPABILITY,modem_sbp_config[101].SBP_LTE_DYNAMIC_DOWNGRADE_CAPABILITY,OTA and OTA BY OP,no,no,no,yes,"UE may fail to register Network due to camp on problem cell that can not recognize some UE capability, <BR>this SBP enable UE to dynamic detect abnormal scenario when report UE capability, hence can downgrade<BR>the capability which problem cell can not recognize.<BR>If UE camp on custom define problem cell and NW continously query UE capability X times within Y seconds,<BR>UE will downgrade the problem capability that report to NW.<BR>X, Y, problem cells and problem capability can configured by customer, see Description 2.<BR><BR>[NVRAM LID]<BR>NVRAM_EF_ERRC_CUSTOM_FEATURE_LID<BR>[Parameters that trigger this SBP feature]<BR>Timer (in second) : default set 180s<BR>Report Capability threshold times : default set as 3 <BR>[Problem CELL Config]<BR>(1) By PLMN & Band<BR>(2) By PLMN & Cell ID in SIB1<BR>[Problem Capability Bitmap]<BR>The capability downgrade by this SBP feature is controlled by a 8 bits bitmap.<BR>In current design, only downgrade UE AS release from Rel12 to Rel11 is defined in the bitmap (0x01).",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disable,,,"If define __DYNAMIC_DOWNGRADE_CAPABILITY__ in makefile, the SBP value will set to 1",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6005,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_LTE_EAB,modem_sbp_config[24].SBP_LTE_EAB,OTA and OTA BY OP,no,no,no,yes,"EAB is a R11 feature, for both RAN overload control and Core network overload control for Machine-Type Communication(MTC).<BR>This SBP is to enable/disable EAB feature. If device is not belong to MTC module, UE can disable EAB feature.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:disable<BR>0x01:enable,,,The setting of this SBP could be set to "enable" by defining compile option __LTE_EAB__ in the makefile,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) Y<BR> Test Time (minutes) 5<BR> [Init] <BR> Set SBP <BR> [Test Step] <BR>Config EAB<BR>Setup RRC connection<BR> [Expected Result]<BR>Setup RRC connection successfully,Pass,,,,
+6006,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_LTE_EARLY_OOS_SEARCH_ENH,modem_sbp_config[90].SBP_LTE_EARLY_OOS_SEARCH_ENH,OTA and OTA BY OP,no,no,no,no,"When UE encounter out-of-service, UE will search full band to try to recover service. In recovery procedure, it may spend much time due to many LTE bands.<BR>If this SBP is enable, UE will start full band search after serving cell becomes bad and before out-of-service. So this can save time in recovery procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6007,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_LTE_EDLMIMO,modem_sbp_config[10].SBP_LTE_EDLMIMO,OTA and OTA BY OP,no,no,no,yes,"Enhanced DL MIMO. This feature is used to control if UE supports LTE Enhanced DL MIMO Feature.<BR>- If SBP_LTE_EDLMIMO is disabled, pmi-disabling (disable Precoding Matrix Indicator) and TM9 will be disabled.",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6008,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_LTE_ENH_RSRP_SEARCH,modem_sbp_config[31].SBP_LTE_ENH_RSRP_SEARCH,OTA and OTA BY OP,no,no,no,no,"This SBP is used to search a better LTE cell to camp on when CSFB Fast Return.<BR>When this SBP is enabled, UE will search more LTE cells and select a best LTE cell to camp on.<BR>When this SBP is disabled, UE will camp on first found suitable LTE cell.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,User could use compile option __LTE_ENH_RSRP_SEARCH__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6009,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_LTE_EPLMN_SEARCH,modem_sbp_config[36].SBP_LTE_EPLMN_SEARCH,OTA and OTA BY OP,no,no,no,no,"This SBP is used to turn on CMCC/CMHK LTE Cell (Re)Selection Improvement.<BR>In boundary of CMCC and CMHK network, CMCC and CMHK may become Equivalent PLMNs, so UE can reselect/redirect between these two PLMNs smoothly. But changing PLMN may cause duplex mode switch, so it should avoid ping-pong switch between CMCC/CMHK.<BR>When this SBP is enabled, it can avoid ping-pong LTE cell (re)selection between CMCC/CMHK.<BR>When this SBP is disabled, ping-pong LTE cell (re)selection may happen.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,User could use compile option __SBP_LTE_EPLMN_SEARCH__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6010,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_FAST_PLMN_LIST,modem_sbp_config[18].SBP_LTE_FAST_PLMN_LIST,OTA and OTA BY OP,no,no,no,no,"This SBP is used to speed up LTE PLMN list procedure for static or slow moving UE.<BR>When this SBP is enabled, UE will use history information to speed up LTE PLMN list procedure in static or slow moving scenario. Impact of using history information is that new cells may be missed during LTE PLMN list procedure.<BR>When this SBP is disabled, UE will perform a complete scan for LTE PLMN list procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6011,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_LTE_FAST_PLMN_LIST_BY_REGION,modem_sbp_config[98].SBP_LTE_FAST_PLMN_LIST_BY_REGION,OTA and OTA BY OP,no,no,no,no,"This SBP is used to speed up LTE PLMN list procedure for UE.<BR>When this SBP is enabled, UE will use stored environment information to speed up LTE PLMN list procedure.<BR>Impact of using stored environment information is that new cells may be missed during LTE PLMN list procedure.<BR>When this SBP is disabled, UE will perform a complete scan for LTE PLMN list procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6012,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_LTE_FAST_POWER_ON_SEARCH,modem_sbp_config[17].SBP_LTE_FAST_POWER_ON_SEARCH,OTA and OTA BY OP,no,no,no,no,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6013,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_FEICIC,modem_sbp_config[9].SBP_LTE_FEICIC,OTA and OTA BY OP,no,no,no,yes,"Further Enhanced Inter-cell Interference Coordination. This feature is used to control if UE supports LTE eICIC and FeICIC Feature.<BR>- Enhanced ICIC (eICIC) is used to deal with interference issues in HetNets, and mitigate interference on traffic and control channels.<BR>- Further enhanced ICIC (FeICIC) is used to cancel the inter-cell interference.<BR>- If SBP_LTE_FEICIC is disabled, both eICIC and FeICIC will be disabled.",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support<BR>1:support,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6014,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_FEMTOCELL_SYSTEM_SELECTION,modem_sbp_config[18].SBP_LTE_FEMTOCELL_SYSTEM_SELECTION,OTA and OTA BY OP,no,no,no,yes,"This SBP was designed to allow the user control the LTE Femto Cell selection machanism. <BR>When SBP disable, UE will disable following user control LTE femto cell selection control function, and perform the LTE Femtocell selection according to 3GPP requirement. <BR>When SBP enable, UE will perform the LTE Femto Cell Selection according to user control by select one of three options descripted below:<BR>Option 1: Connect to all open, closed/CSG, or hybrid LTE femtocells.This shall be the default system selection mode for femtocells.<BR>Option 2: Connect to no open, closed/CSG, or hybrid LTE femtocells.<BR>Option 3: Connect only to LTE femtocells whose CSG IDs are on either the device's Allowed CSG List or Operator CSG List.<BR>In currently implementation, UE will stored this option configured by user interface in NVRAM.(i.e.configured value will be still valid after UE re power-on.)<BR>The AT Command use to setting the Option Value: Query femtocell system selection mode <BR><BR>AT+EFSS? <BR><BR>+EFSS: &mode& <BR><BR>OK <BR><BR>Set femtocell system selection mode <BR><BR>AT+EFSS=&mode& <BR><BR>mode: integer =>The femto cell selection option value",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. Perform the LTE Femtocell selection according to UE option setting.<BR>0:Disable. Perform the LTE Femtocell selection according to 3GPP requirement.,,,User could use compile option __SBP_LTE_FEMTOCELL_SYSTEM_SELECTION__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,"Manual CSG selection in E-UTRA with CSG list on USIM,",Pass,,,,
+6015,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_LTE_FORCE_RX_NESIB_B4_CONN,modem_sbp_config[34].SBP_LTE_FORCE_RX_NESIB_B4_CONN,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6016,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_IDC_R11,modem_sbp_config[9].SBP_LTE_IDC_R11,OTA and OTA BY OP,no,no,no,yes,"IDC is an R11 feature. Turn on SBP_LTE_IDC_R11, UE will indicate support of IDC in UECapabilityInformation to network.<BR>- When network includes idc-Indication-r11 in RRCConnectionReconfiguration and UE supports IDC, UE may detect the interference from other RF (WiFi/ Bluetooth/ GPS) and send InDeviceCoexIndication to network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,default on when with compile option __LTE_A_IDC__,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config IDC<BR> [Expected Result]<BR>Config IDC successfully,Pass,,,,
+6017,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_IGNORE_CONN_PS_PAGING,modem_sbp_config[18].SBP_LTE_IGNORE_CONN_PS_PAGING,OTA and OTA BY OP,no,no,no,yes,"This SBP is to ignore unexpected PS PAGING in LTE CONNECTED mode. <BR>Under certain conditions, NW may send unexpected PS PAGING to UE that already in LTE CONNECTED mode.<BR>With this SBP set to 1(TRUE), UE is able to ignore unexpected PAGING from NW in LTE CONNECTED mode and to prevent abnormal behavior.<BR>If the SBP set to 0(FALSE), UE will process the abnormal PAGING and may cause some performace loss.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, Ignore PS Paging in Connected mode.<BR>0:Disable, Handle PS Paging in Connected mode.",,,User could use compile option __LTE_IGNORE_CONN_PS_PAGING__ to switch the setting of this SBP,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6018,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_LTE_IRCR_PRIO_BOOST,modem_sbp_config[68].SBP_LTE_IRCR_PRIO_BOOST,OTA and OTA BY OP,no,no,no,yes,"As per Standard, While LTE freq IRCR priority is same as GSM, the related LTE freq would not be configed to measured, thus the IRCR to this/these LTE freq might be blocked consequently. In order to facilitate the IRCR procedure and LTE occupation rate in this case, the LTE freq IRCR priority will boost higher than GSM for workaround.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS LTE IRCR boost enabled.<BR>0:GAS LTE IRCR boost not enabled.,,,Feature could be enabled by enabling compiler option __LTE_GAS_IRCR_PRIORITY_BOOST__.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6019,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LTE_JDG_POTENTIAL_CA_CELL,modem_sbp_config[83].SBP_LTE_JDG_POTENTIAL_CA_CELL,OTA and OTA BY OP,no,no,no,yes,This feature is provided as a optimization for modem performance. In MTK design we could judge a cell whether a CA cell or not by CA cell charcteristic. This is to let UE to judge a cell whether a CA cell or not when there is no store information.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+6020,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_LTE_LARGE_BW_HIGH_PRIORITY,modem_sbp_config[98].SBP_LTE_LARGE_BW_HIGH_PRIORITY,OTA and OTA BY OP,no,no,no,yes,This feature is provided as a optimization for modem performance. In MTK design we will select large bandwidth cell in high priority when doing cell selection/reselecion. This is to let UE to camp on large bandwidth cell in high priority in order to get more physical resource from network.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+6021,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[98].SBP_LTE_LARGE_BW_PREFER,modem_sbp_config[98].SBP_LTE_LARGE_BW_PREFER,OTA and OTA BY OP,no,no,no,yes,This feature is provided as a optimization for modem performance. In MTK design we will select large bandwidth cell in high priority when doing cell selection/reselecion. This is to let UE to camp on large bandwidth cell in high priority in order to get more physical resource from network.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+6022,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_MBMS,modem_sbp_config[9].SBP_LTE_MBMS,OTA,no,no,no,no,"Enable this feature means that UE supports LTE MBMS R9 feature. When SBP_LTE_MBMS is enabled and AP enable MBMS service, modem will open MBMS related channels.<BR>- Please refer to sub-clause 5.8 in TS36.331.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MBMS support in LTE (eMBMS),4G,,,Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS case<BR>[Test Step] Run the MBMS case<BR>[Expected Result] <BR>MBMS session can be opened,Pass,,,,
+6023,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_MBMS_COUNTING,modem_sbp_config[9].SBP_LTE_MBMS_COUNTING,OTA and OTA BY OP,no,no,no,no,"Enable this SBP means that UE supports MBMS counting procedure(LTE R10 feature). MBMS counting in LTE is used:<BR>- to determine if there are sufficient UEs interested in receiving a service,<BR>- to enable the operator to decide if it is appropriate to deliver the service via MBSFN,<BR>- to allow the operator to choose between enabling or disabling MBSFN transmission for the service.<BR>- Please refer to sub-clause 5.8.4 in TS36.331.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,SBP_LTE_MBMS should also be enabled if SBP_LTE_MBMS_COUNTING is enabled.,MBMS support in LTE (eMBMS),4G,,,"Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS-Counting case<BR>[Test Step] Run the MBMS-Counting case<BR>[Expected Result] <BR>MBMS session can be opened, and related MBMS-Counting action passed.",Pass,,,,
+6024,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_LTE_MBMS_SCELL,modem_sbp_config[15].SBP_LTE_MBMS_SCELL,OTA and OTA BY OP,no,no,no,no,This is LTE R11 MBMS receiving on scell feature. Enable this feature means that UE in RRC_CONNECTED state supports MBMS reception on a frequency where (according to supported Band Combination) a serving cell (scell) may be additionally configured.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,default off when compile option MT6739 is defined. Note that SBP_LTE_MBMS should also be enabled if SBP_LTE_MBMS_SCELL is enabled.,MBMS support in LTE (eMBMS),4G,,,Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS SCell case<BR>[Test Step] Run the MBMS SCell case<BR>[Expected Result] <BR>MBMS session can be opened on SCell,Pass,,,,
+6025,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_LTE_MBMS_SERVICE_CONTINUITY,modem_sbp_config[9].SBP_LTE_MBMS_SERVICE_CONTINUITY,OTA and OTA BY OP,no,no,no,no,"Enable this SBP means that UE supports LTE R11 eMBMS Service Continuity Feature. It allows UE to continue receiving MBMS service(s) when changing cell(s).<BR>- In idle mode, UE do normal cell reselection with preference.<BR>- In connected mode, UE informs the network about its interest via a new RRC message, MBMSInterestIndication(MII), refer to sub-clause 5.8.5 in TS36.331.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,SBP_LTE_MBMS should also be enabled if SBP_LTE_MBMS_SERVICE_CONTINUITY is enabled.,MBMS support in LTE (eMBMS),4G,,,"Test in machine: Y<BR>Test Time (minutes) : 10<BR>[Init] Machine MBMS Service continuity case<BR>[Test Step] Run the MBMS Service continuity case<BR>[Expected Result] <BR>MBMS session can be opened, and Service continuity is OK.",Pass,,,,
+6026,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_LTE_MDT,modem_sbp_config[14].SBP_LTE_MDT,OTA and OTA BY OP,no,no,no,yes,"Minimization of Drive Tests (MDT) is an LTE R10 feature. If enabled, UE is able <BR>- to support the MDT feature specified in 3GPP TS 37.320,<BR>- to indicate NW that UE supports LTE MDT feature in UECapabilityInformation,<BR>- to include the connEstFailInfoAvailable-r11 in RRCConnectionSetupComplete, RRCConnectionReconfigurationComplete, and RRCConnectionReestablishmentComplete when available,<BR>- to include the connEstFail-Report in UEInformationResponse when requested and available.<BR>- If SBP_LTE_MDT is disabled, all MDT related IEs will not be included in UEInformationResponse.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config MDT<BR> [Expected Result]<BR>Config MDT successfully,Pass,,,,
+6027,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_LTE_MRU_SEARCH,modem_sbp_config[18].SBP_LTE_MRU_SEARCH,OTA and OTA BY OP,no,no,no,no,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6028,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_LTE_NO_COMBINED_ATTACH_BY_SIM,modem_sbp_config[64].SBP_LTE_NO_COMBINED_ATTACH_BY_SIM,OTA and OTA BY OP,no,no,no,yes,"When UE attaches PS only NW, and IMS is not registered, UE will disable EUTRAN. If the SBP is turned on, UE will ignore the IMS registration status. That is, UE will not disable EUTRAN when UE receives EPS only attach accept and IMS is not registered.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6029,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_LTE_ONLY_OPER_SIM_LTE_ONLY_MODE,modem_sbp_config[63].SBP_LTE_ONLY_OPER_SIM_LTE_ONLY_MODE,OTA and OTA BY OP,no,no,no,yes,"For 4G only card, set rat mode to 4G only so that UE does not search 23G networks thereby reducing the power consumption",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,"To enable this feature, compile option __LTE_ONLY_OPER_SIM_LTE_ONLY_MODE__ must be defined",,,,,"After enabling the SBP, rat mode should be locked at LTE",Pass,,,,
+6030,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_LTE_PARTIAL_BAND,modem_sbp_config[27].SBP_LTE_PARTIAL_BAND,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+6031,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_LTE_PREFER_ENDC_RESEL_ENH,modem_sbp_config[103].SBP_LTE_PREFER_ENDC_RESEL_ENH,OTA and OTA BY OP,no,no,no,yes,"This feature is provided as a optimization for modem performance.<BR>In MTK design, we will prefer reselect to LTE cell which have EN-DC configuration.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable prefer ENDC reselection enhancement<BR>0:disable prefer ENDC reselection enhancement,,,N/A,R15 baseline 5G,5G Baseline,,,follow MCF RD IT SOP,Pass,,,,
+6032,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_LTE_RESEL_HIGH_POWER_PREFER,modem_sbp_config[79].SBP_LTE_RESEL_HIGH_POWER_PREFER,Not Support,no,no,no,yes,"This SBP can improvement customer signal bar behavior. When this SBP is on, Serving RSRQ, SINR are better than threshold defined in NVRAM, UE do not reselect to cell which RSRP difference larger than RSRP difference value in NVRAM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,N/A,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+6033,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_ACTIVE,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_ACTIVE,OTA and OTA BY OP,no,no,no,yes,"When this SBP enabled, UE will apply VzW enhanced MPSR procedure when UE is in 1xRTT connected mode. Please refer to VzW requirement for more information.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,User could use compile option __VZW_LTE_SCANNING_ENHANCEMENT_1XRTT_ACTIVE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6034,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_EVDO_IDLE,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_1XRTT_EVDO_IDLE,OTA and OTA BY OP,no,no,no,yes,"When this SBP enabled, UE will apply VzW enhanced MPSR procedure when UE is in 1xRTT/EVDO idle mode. Please refer to VzW requirement for more information.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,User could use compile option __VZW_LTE_SCANNING_ENHANCEMENT_1XRTT_EVDO_IDLE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6035,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_EVDO_ACTIVE,modem_sbp_config[33].SBP_LTE_SCANNING_ENHANCEMENT_EVDO_ACTIVE,OTA and OTA BY OP,no,no,no,yes,"When this SBP enabled, UE will apply VzW enhanced MPSR procedure when UE is in EVDO connected mode. Please refer to VzW requirement for more information.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,User could use compile option __VZW_LTE_SCANNING_ENHANCEMENT_EVDO_ACTIVE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6036,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_LTE_SEC_SKIP,modem_sbp_config[40].SBP_LTE_SEC_SKIP,OTA and OTA BY OP,no,no,no,yes,"Some LTE simulation machines(R&S, Anritsu,...etc) support a configuration called "security off mode". When this configuration is set, machine would not perform authentication& security mode control procedure.As a result it will only send NAS message in plain text and only accept NAS message in plain text.<BR>To support this machine functionality, MTK add an option so UE would be able to bypass LTE security protection & security procedures when this SBP is enabled, and a proprietary AT command is introduced to dynamically control the option on/off:<BR>AT+EFAKECFG=<status>: enable/disable LTE security protection bypassing, only valid when SBP_LTE_SEC_SKIP is on, no effect otherwise.<BR><status>: integer<BR>0: disable<BR>1: enable<BR>To enable this option, customer has to send AT+EFAKECFG=1(SBP_LTE_SEC_SKIP must be on) to modem and then reboot device. After reboot, UE will enter security bypassing mode and is able to send/receive plain NAS messages. To disable this option, customer has to send AT+EFAKECFG=0(SBP_LTE_SEC_SKIP must be on) to modem and then reboot device. After reboot, UE will return to normal mode.<BR>IMPORTANT NOTICE: This feature is designed only for phone verification on machine, NOT for real network.The attempt to use this feature on real network would fail and cause security vulnerabilities on UE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Skip LTE security protection for NAS messages.<BR>0:Disabled. NOT skip LTE security protection for NAS messages.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6037,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_LTE_SET_RAT_DO_EPS_DETACH,modem_sbp_config[37].SBP_LTE_SET_RAT_DO_EPS_DETACH,OTA and OTA BY OP,no,no,no,yes,"For some NW, it may expected a Combined EPS/IMSI DETACH when changing UE's supported RAT mode setting, if UE is Combined ATTACH to LTE(e.g. from 234G auto to 23G auto).<BR>MTK apply this as common behavior. If UE is Combined ATTACH to LTE, UE will do Combined EPS/IMSI DETACH when changing UE's supported RAT mode setting. If UE is EPS only ATTACH to LTE, UE will do EPS DETACH when changing UE's supported RAT mode setting.<BR>The purpose of this SBP is to control the DETACH type when changing UE's supported RAT mode setting. If this SBP is on, UE will always do EPS DETACH when changing UE's supported RAT mode setting. This SBP is default off now which means UE will do Combined EPS/IMSI DETACH when changing UE's supported RAT mode setting, if UE is Combined ATTACH to LTE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Do EPS DETACH when changing UE's supported RAT mode setting.<BR>0:Disable. Do Combined EPS/IMSI DETACH when changing UE's supported RAT mode setting.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6038,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_LTE_SM_REJ_15_PERFORMANCE_IMPROVEMENT,modem_sbp_config[37].SBP_LTE_SM_REJ_15_PERFORMANCE_IMPROVEMENT,OTA and OTA BY OP,no,no,no,yes,"For U+ operator, when UE does not camp on a network of Korea MCC, UE should disable EUTRAN after receiving reject cause #15.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __LTE_SM_REJ_15_PERFORMANCE_IMPROVEMENT__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6039,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_LTE_SON,modem_sbp_config[10].SBP_LTE_SON,OTA and OTA BY OP,no,no,no,yes,"LTE Self-Organizing Network (SON) is an R10 feature. If enabled, UE is able<BR>- to indicate NW that UE supports LTE SON feature in UECapabilityInformation,<BR>- to include the rlf-InfoAvailable in RRCConnectionSetupComplete, RRCConnectionReconfigurationComplete, and RRCConnectionReestablishmentComplete when available,<BR>- to include the rach-Report and rlf-Report in UEInformationResponse when requested and available.<BR>- If SBP_LTE_SON is disabled, rach-Report and rlf-Report will not be included in UEInformationResponse.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Open SON<BR> [Expected Result]<BR>Report SON,Pass,,,,
+6040,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_LTE_SUPPORT_NONDEFAULT_SIB2_UL,modem_sbp_config[58].SBP_LTE_SUPPORT_NONDEFAULT_SIB2_UL,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to determine if UE can camp on the LTE cell which UL_freq in SystemInformationBlockType2 is not determined from the default TX-RX frequency separation defined in TS 36.101. The reason is that spec doesn't clearly describe how UE should act while UL_FREQ in SystemInformationBlockType2 is not the default value.<BR>If SBP is turned-off, UE can't camp on the LTE cell with UL_FREQ in SystemInformationBlockType2 which is not determined from the default TX-RX frequency separation, otherwise UE can camp on that LTE cell as SBP is turned-on.<BR>From 36.331, For FDD: If absent, the (default) value determined from the default TX-RX frequency separation defined in TS 36.101. For TDD: This parameter is absent and it is equal to the downlink frequency.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE can't camp on the LTE cell with UL_FREQ in SystemInformationBlockType2 which is not determined from the default TX-RX frequency separation defined in TS 36.101. UE will treat this cell as a not-suitable cell.<BR>1:UE can camp on the LTE cell with UL_FREQ in SystemInformationBlockType2 which is not determined from the default TX-RX frequency separation defined in TS 36.101.,,,N/A,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+6041,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[83].SBP_LTE_T325_DEPRIORITY,modem_sbp_config[83].SBP_LTE_T325_DEPRIORITY,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE will support deprioritization feature. For this feature which is specified in TS36.331, when UE receives RRCConnectionReject included deprioritisationReq, it starts or restarts timer T325 with the timer value set to the deprioritisationTimer signalled, and stores the deprioritisationReq until T325 expiry. Note that UE stores the deprioritisation request irrespective of any cell reselection absolute priority assignments (by dedicated or common signalling), and regardless of RRC connections in E-UTRAN or other RATs unless specified otherwise.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6042,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_LTE_U,modem_sbp_config[28].SBP_LTE_U,OTA and OTA BY OP,no,no,no,yes,"LTE Unlicensed. This feature is used to control if UE supports LTE-U (LTE Unlicensed) Feature.<BR>- Aggregation of LTE band and Unlicensed band (2.4GHz, 5GHz) in order to support wider downlink transmission bandwidths.",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,This feature is controlled by __LTE_U__.,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6043,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,modem_sbp_config[21].SBP_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, it will cause UE to do LU before making an emergency call if current (23G camped cell) LAI is different from the registered LAI.<BR>- Note: in this case Registered LAI refers to LAI given by the network in previous LTE registration procedures e.g. Attach accept, TAU accept.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Do not Configure LU before CSFB ECC call if LAI is different<BR>0x1:Configure LU before CSFB ECC call if LAI is different,,,"To enable this feature, compile option __ENABLE_LU_BEFORE_CSFB_ECC_IF_LAI_DIFF__ must be defined.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] NA <BR>[Test Step]<BR>1. Register UE in LTE.<BR>2. Perform Emergency call <BR>[Expected Result]<BR>UE is expected to fo LU before making Emergency call if current LAI is different from register LAI.,Pass,,,,
+6044,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,modem_sbp_config[16].SBP_LU_BEFORE_CSFB_ECC_NEEDED,OTA and OTA BY OP,no,no,no,yes,"This SBP controls whether UE needs to do LU before making a CSFB emergency call. <BR>If this feature is enabled and if current camped PLMN is part of MM custom list LR_BEFORE_CSFB_ECC_PLMN_LIST, UE shall do LU first before CSFB emergency call even if it camps on registered LA after fallback from LTE",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00:If disable, UE will behave as per spec<BR>0x01:If enable, UE need to do LU before CSFB emergency call",,,"To disable this feature, compile option __DISABLE_LU_BEFORE_CSFB_ECC__ must be defined.",WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Add the PLMN in LR_BEFORE_CSFB_ECC_PLMN_LIST array in mm_custom_config.c <BR> Boot up the device & UE register in LTE.<BR> [Test Step]<BR> Perform Emergency call & UE perform CSFB to 23G network but with diffrent LA given by network in previous LTE registration.<BR> <BR> [Expected Result]<BR> UE is expected to emergency call before LU,Pass,,,,
+6045,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_MANUAL_LIST_DISPLAY_SUITABLE_ONLY,modem_sbp_config[61].SBP_MANUAL_LIST_DISPLAY_SUITABLE_ONLY,OTA and OTA BY OP,no,no,no,yes,"The TS23.122 4.4.3.1.2 Manual Network Selection Mode Procedure, "The MS indicates whether there are any PLMNs, which are available using all supported access technologies. This includes PLMNs in the "forbidden PLMNs" list, "forbidden PLMNs for GPRS service" list and PLMNs which only offer services not supported by the MS."<BR>The definition of available PLMN in 23.122 "Available PLMN: For GERAN A/Gb mode see 3GPP TS 43.022 [35]. For UTRAN see 3GPP TS 25.304 [32]. For E-UTRAN see 3GPP TS 36.304 [43]. For cdma2000 1xRTT and cdma2000 HRPD see 3GPP2 C.S0016 [44]."<BR>The definition of of available PLMN in 25.304 "Available PLMN: A PLMN for which the UE has found at least one cell and read its PLMN identity."<BR>The definition of of available PLMN in 36.304 "Available PLMN(s): One or more PLMN(s) for which the UE has found at least one cell and read its PLMN identity(ies)."<BR>If this SBP is turned on, UE displays the PLMNs that suitable cell exists in manual PLMN list result. The behavior may violate spec.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __SBP_MANUAL_LIST_DISPLAY_SUITABLE_ONLY__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6046,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_MANUAL_MODE_NW_SEL,modem_sbp_config[43].SBP_MANUAL_MODE_NW_SEL,OTA,no,no,no,yes,"If this SBP is enabled, it would allow to change network selection mode. Otherwise network selection mode would not be allowed to be updated.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,"If SBP_PERMANENT_AUTO_SEL_MODE is on, this SBP would not allows UE to change the network mode to manual mode after manual selection<BR>The setting of this SBP could be set to "enable" by defining compile option __MANUAL_MODE_NW_SEL__ in the makefile",,,,,Test manual selection mode,Pass,,,,
+6047,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_MAPPING_MCC_OTA_INVALID,modem_sbp_config[94].SBP_MAPPING_MCC_OTA_INVALID,OTA and OTA BY OP,no,no,no,yes,"This feature is used to enable/disable MCC mapping, when MCC in OTA is not valid.MCC priority:MCC in OTA valid; then MCC mapped from PRL valid; the last, MCC mapped from Vzw mapping table.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disbale,,,This feature is controlled by __ENABLE_MAPPING_MCC_OTA_INVALID__ flag,MD Config,Modem - Customer Requirement,,,test in machine<BR>[Init] <BR>Sprint card<BR>machne config a 1xRTT cell with MCC 000<BR>[Test Step] <BR>power on the phone<BR>[Expected Result]<BR>UE register normally,Pass,,,,
+6048,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_MCC_ASSIST_FULLBAND_RAT_SELECTION,modem_sbp_config[20].SBP_MCC_ASSIST_FULLBAND_RAT_SELECTION,OTA and OTA BY OP,no,no,no,yes,"When Fast roaming is enabled, in fullband scan phase and UE has already detected current location country. The first fullband search RAT will change to the RAT of highest priority VPLMN in current country.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6049,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_MCC_BAND_ENH_FOR_PLMN_SEARCH,modem_sbp_config[67].SBP_MCC_BAND_ENH_FOR_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6050,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_MCC_BAND_MANUAL_LIST_OPT,modem_sbp_config[86].SBP_MCC_BAND_MANUAL_LIST_OPT,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6051,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_MDT_LOCATION_TIME_VALIDITY,modem_sbp_config[59].SBP_MDT_LOCATION_TIME_VALIDITY,OTA and OTA BY OP,no,no,no,yes,Enable this SBP is to apply time validity on Minimization of Drive Tests(MDT) location info.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Don't Apply<BR>1:Apply,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6052,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_MDT_OBTAINLOCATION_OPEN_GPS,modem_sbp_config[65].SBP_MDT_OBTAINLOCATION_OPEN_GPS,OTA and OTA BY OP,no,no,no,yes,"When UE receives obtainLocation-r11, UE should attempt to have detailed location information available using GNSS. The detail is up to UE implementation. Currently, we have two ways to acquire detailed location information which can be chosen by this SBP. The following is SPEC description of obtainLocation-r11<BR>- 3GPP TS 36.331 6.3.6 - obtainLocation. Requests the UE to attempt to have detailed location information available using GNSS. E-UTRAN configures the field only if includeLocationInfo is configured for one or more measurements.<BR>- 3GPP TS 37.320 5.2.1.3 - For immediate MDT, the eNB can request the UE to attempt to make GNSS location information available. Standalone GNSS is used as the default baseline. It is desired that the UE provides fresh location information with each immediate MDT measurement report. The details how this is achieved is up to UE implementation.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __MDT_OPEN_GPS__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (minutes) <BR> [Init] <BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6053,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_MERGE_LAU_AND_ATTACH_EPLMN_LIST,modem_sbp_config[64].SBP_MERGE_LAU_AND_ATTACH_EPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turned on, UE will merge Equivalent PLMN list provided by NW in LU accept and attach/RAU accept from the same PLMN. This can fix some scenarios that NW indicates different EPLMN in LAU and attach/RAU. Note that this SBP may violate the EPLMN list handling description in TS24.008.<BR>TS24.008 4.1.1.9 The mobile equipment shall store a list of "equivalent PLMNs". These PLMNs shall be regarded by the MS as equivalent to each other for PLMN selection and cell selection/re-selection. The same list is used by EMM, GMM and MM. The list of equivalent PLMNs is replaced or deleted at the end of each location updating procedure, routing area updating procedure and GPRS attach procedure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __MERGE_LAU_AND_ATTACH_EPLMN_LIST__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6054,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,modem_sbp_config[100].SBP_MM_CONVERT_RAU_SR_REJECT_CAUSE7_TO_111_DURING_CSFB,OTA and OTA BY OP,no,no,no,yes,"During IRAT from 4G to 3G, When GMM trigger RAU or Service Request in 3G. This SBP when enable shall allow GMM to convert RAU reject cause #7 (GPRS_NOT_ALLOWED) to #111 (PROTO_ERROR_UNSPECIFIED) during CSFB.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GMM shall convert RAU or Service reject cause #7 to #111 during CSFB<BR>0:GMM shall not convert RAU or Service reject cause #7 to #111 during CSFB,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR> Test Time (minutes) : 10 mins<BR> [Init] NA<BR> [Test Step ] Perform CSFB Call, & trigger Data services Network send RAU reject #7 <BR> [Expected Result]<BR> UE expected to camp & data services",Pass,,,,
+6055,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,modem_sbp_config[78].SBP_MM_CUSTOMIZE_T3240_TIMEOUT_VALUE,OTA,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x1:If disable, UE support T3240 Timeout value as per spec<BR>0x1:If enable, UE supports Customize T3240 Timeout value",,,,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G on PLMN 46000F<BR>-> Trigger CS connection release after CS registration is done<BR>->Observe T3212 should run with 12 sec<BR>[Expected Result]<BR>Observe T3212 should run with 12 sec,Pass,,,,
+6056,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,modem_sbp_config[95].SBP_MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM,OTA and OTA BY OP,no,no,no,yes,"As per 24.008 section 11.2.2, ATTACH retry T3311 value specified is 15s.<BR>This SBP feature option allows to customize the ATTACH retry T3311 timer value on RSIM and AKA stack (virtual card).<BR>The custom ATTACH retry timer (T3311) value is taken from MM_CUSTOM_T3311_TIMER_VALUE_ON_RSIM_STACK on RSIM stack<BR>and MM_CUSTOM_T3311_TIMER_VALUE_ON_AKA_STACK on AKA stack (Virtual SIM card) in custom_mm_config.c.<BR>This feature option is disabled for test SIM and FTA mode(GCF configuration).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Allow custom ATTACH retry T3311 timer value on RSIM/AKA stack .<BR>0x00:Use T3311 value as mentioend in 3GPP spec 24.008,,,This feature is controlled by __MM_CUSTOMIZE_T3311_TIMEOUT_VALUE_FOR_RSIM__ flag,VSIM 1.0,SIM,,,Test in machine (Y/N) N<BR>Test Time (minutes) 10 mins <BR>[Init] <BR>Configure MM_CUSTOM_T3311_TIMER_VALUE_ON_AKA_STACK in custom_mm_config.c <BR>[Test Step]<BR>1. Enable RSIM & AKS Stack (virtual card)<BR>2. Perform PS attach request & start T3311<BR>[Expected Result]<BR>Attach retry T3311 timer value based on initial configur value,Pass,,,,
+6057,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,modem_sbp_config[77].SBP_MM_CUST_PROC_CAUSE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If this SBP is disabled, UE will behave as per Network reject cause<BR>1:If this SBP is enabled, MM will convert various reject cause based on cusotmer requirement .",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 15 mins<BR> [Init]<BR> Configure MCF NVRAM_MM_GMM_REJECT_cAUSE_MAPPING_LID {0x04,0x07,46001,46001,0xff,0xff,0xff,0x014,0x00} <BR> [Test Step]<BR> UE perform GMM Attach request on HPLMN( i.e. 46001)& Network send attach reject with cause #7. ( If you want ot use other HPLMN, please update the MCF NVRAM_MM_GMM_REJECT_CAUSE_MAPPING_LID param3, param4. with the respective HPLMN )<BR><BR> <BR> <BR> [Expected Result]<BR> UE convert attach reject cause #7 to reject cause #14 & GPRS is still in service",Pass,,,,
+6058,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,modem_sbp_config[9].SBP_MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1,OTA and OTA BY OP,no,no,no,yes,"Before REL10 3GPP recommended to perform LAU On 4g to 23g on same LA.<BR>- 3GPP spec 24.008 4.4.1 CR No 1638<BR>- From 3GPP release 10 version, spec does not ask UE to perform LAU if UE comes back to 23G from 4G on same registered LA as part of inter system change<BR>- After enable this SBP UE will trigger LU when UE comes to 23g from 4g irrespective of registered LA is same or not",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:This feature will not trigger LU during inter system change from S1 bit<BR>0x1:This FeatureTrigger LU after coming to 23g from 4g only if different LA .MM will force LU after inter system change from S1bit,,,"To enable this feature, compile option __MM_DISABLE_FORCE_LU_AFTER_INTER_SYSTEM_CHANGE_FROM_S1__ must be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> boot up the device & UE register in LTE <BR> [Test Step]<BR> UE perform IRAT to 23G on same register LA. <BR> <BR> [Expected Result]<BR> UE is expected to trigger LU irrespective of registered LA is same or not,Pass,,,,
+6059,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_DISABLE_PREVIOUS_RPLMN_FROM_NVRAM,modem_sbp_config[1].SBP_MM_DISABLE_PREVIOUS_RPLMN_FROM_NVRAM,OTA and OTA BY OP,no,no,no,yes,"When turn-off this SBP, UE uses previous RPLMN from NVRAM as search target, to prevent the issue that manual selection mode without search target, ex: when there is no valid RPLMN. This SBP is only applied for non test SIM and non test mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_DISABLE_PREVIOUS_RPLMN_FROM_NVRAM__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6060,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_DISABLE_RETRY_ABNORMAL_LAI,modem_sbp_config[0].SBP_MM_DISABLE_RETRY_ABNORMAL_LAI,OTA and OTA BY OP,no,no,no,yes,"According to TS24.008, UE should retry abnormal LAI after T3212 expiry which is usually 1 hour, It is not acceptable for user. Besides, UE should retry abnormal RAI after T3302 according to TS 24.008 and retry abnormal TAI after T3402 expiry according to T24.301. By default, modem will retry abnormal LAI after 10 minutes and retry RAI/TAI after 15 minutes. After turn on this feature, modem will retry abnormal LAI/RAI/TAI only when T3212/T3302/T3402 expiry.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_DISABLE_RETRY_ABNORMAL_LAI__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6061,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_HPPLMN_1ST_ATTEMPT_ENHANCE,modem_sbp_config[0].SBP_MM_HPPLMN_1ST_ATTEMPT_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"When the SBP is on, first higher priority PLMN scan when UE is registered on a VPLMN shall always be 2 min (HPPLMN timer = 2 min at first higher priority PLMN scan). This implementation shall be applied for "Power on", "Out Of Service" and "Manual selection" scenarios. This is related to TS 23.122 CR 236. A configuration option is introduced to enable the UE to perform the first quick search for a higher priority PLMN after 2 minutes not only at switch on, but also upon entering a VPLMN.<BR>Related SBP: SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER. If SBP_DISABLE_2MIN_MINIMUM_HPPLMN_TIMER is off , the first higher priority PLMN scan (HPPLMN timer) will be 2 min.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_HPPLMN_1ST_ATTEMPT_ENHANCE__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6062,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_AUTO_MODE,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_AUTO_MODE,OTA and OTA BY OP,no,no,no,yes,"There is a customizable array IGNORE_EQPLMN_OPERATOR to prevent using network EQPLMN in LOCATION UPDATE ACCEPT, ATTACH/RAU ACCEPT or LTE ATTACH/TAU ACCEPT. This feature option is to restrict the ignore operation take effect only under automatic mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_IGNORE_EQPLMN_IN_AUTO_MODE__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6063,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_MANUAL_MODE,modem_sbp_config[1].SBP_MM_IGNORE_EQPLMN_IN_MANUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"There is a customizable array IGNORE_EQPLMN_OPERATOR to prevent using network EQPLMN in LOCATION UPDATE ACCEPT, ATTACH/RAU ACCEPT or LTE ATTACH/TAU ACCEPT. This feature option is to restrict the ignore operation take effect only under manual mode. The related SBP is SBP_MM_IGNORE_EQPLMN_IN_AUTO_MODE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_IGNORE_EQPLMN_IN_MANUAL_MODE__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6064,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_PLAY_EQPLMN,modem_sbp_config[1].SBP_MM_IGNORE_PLAY_EQPLMN,OTA and OTA BY OP,no,no,no,yes,"If the registered PLMN is Play, to delete the equivalent PLMN list which is received by the network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_IGNORE_PLAY_EQPLMN__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6065,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_IGNORE_YOIGO_EQPLMN,modem_sbp_config[1].SBP_MM_IGNORE_YOIGO_EQPLMN,OTA and OTA BY OP,no,no,no,yes,"If the registered PLMN is Yoigo, to delete the equivalent PLMN list which is received by the network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_IGNORE_YOIGO_EQPLMN__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6066,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_MM_IMSI_DETACH_WHEN_MM_CONN_ACTIVE,modem_sbp_config[10].SBP_MM_IMSI_DETACH_WHEN_MM_CONN_ACTIVE,OTA,no,no,no,yes,"Control IMSI detach while MM connection active<BR>When SBP is enabled<BR>- Enable this SBP will allow to send IMSI detach when MM connection active<BR>When SBP is disabled<BR>- When SBP is disabled, sending of IMSI detach when MM connection active is not allowed<BR>- SIM refresh during OTA will only send the GMM detach but IMSI detach will not be sent<BR>Main functionality depends on mm_custom_imsi_detach_when_mm_conn_active() where this SBP is used",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:if disable sending of IMSI detach during MM conneciton active is not allowe.d<BR>0x1:If enable allow MM to send IMSI detach when MM connection active,,,"To enable this feature, compile option __MM_IMSI_DETACH_WHEN_MM_CONN_ACTIVE__ must be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G <BR>-> Trigger CS Call <BR>-> SIM error<BR>[Expected Result]<BR>UE should do IMSI deatch even when the MM state is MM connection active,Pass,,,,
+6067,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[1].SBP_MM_INTERNATIONAL_HPPLMN_SEARCH,modem_sbp_config[1].SBP_MM_INTERNATIONAL_HPPLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,The UE is allowed to perform international higher priority PLMN search when the UE registers on a PLMN belonging to US and the HPPLMN belongs to Canada.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_INTERNATIONAL_HPPLMN_SEARCH__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6068,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_MM_LU_REJ_17_IN_MANUAL_MODE,modem_sbp_config[16].SBP_MM_LU_REJ_17_IN_MANUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"For AT&T requirement, report special cause for manual reselection rejected #17 by network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_SPECIFIC_CME_CAUSE_LU_REJ_17_IN_MANUAL_MODE__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6069,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_MM_NOT_STAY_ON_FBLA_FOR_REG_PROV,modem_sbp_config[6].SBP_MM_NOT_STAY_ON_FBLA_FOR_REG_PROV,OTA,no,no,no,yes,Workaround for T-mobile TC-4.5.2.6: Reselection to HPLMN on reject code 12 (Location Area not allowed). <BR>When this SBP is disabled<BR>- Scenario: LU rejected with cause 12(Location Area not allowed)<BR>- As per 3GPP spec(24.008 4.4.4.7) device will stay on the same LAI with limited service<BR>- TMO test case will fail because UE does not reselect other cells.<BR>When this SBP is enabled<BR>- After LU reject with cause 12 UE will add current LAI in "List of Forbidden Location Area"<BR>- so that UE can find another cell for normal service,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,"To enable this feature, compile option __MM_NOT_STAY_ON_FBLA_FOR_REG_PROV__ must be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G<BR>-> Trigger LAU reject with cause 12 <BR>-> MM will stay in limited service <BR>[Expected Result]<BR>The mobile station shall store the LAI in the list of "forbidden location areas for regional provision of service".<BR>The MS shall perform a cell selection when back to the MM IDLE state according to 3GPP TS 43.022 [82] and<BR>3GPP TS 25.304 [98].,Pass,,,,
+6070,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_MM_NOT_TRY_ANOTHER_RAT_FOR_LU_ABNORMAL,modem_sbp_config[3].SBP_MM_NOT_TRY_ANOTHER_RAT_FOR_LU_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,This SBP is to allow UE searching next PLMN instead of the same PLMN with the other RAT.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_NOT_TRY_ANOTHER_RAT_FOR_LU_ABNORMAL__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6071,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_MM_PERFORM_PLMN_SEARCH_AFTER_LU_ABNORMAL,modem_sbp_config[3].SBP_MM_PERFORM_PLMN_SEARCH_AFTER_LU_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"In 24.008 CR 852, it is allowed an option to perform a PLMN reselection in order to obtain service if the attempt counter for the registration reaches its limits. This SBP controls the behavior when test SIM is inserted. If non-test SIM is inserted, UE always performs PLMN selection.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_PERFORM_PLMN_SEARCH_AFTER_LU_ABNORMAL__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6072,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_MM_REL11_LR_REJ_CONGESTION,modem_sbp_config[14].SBP_MM_REL11_LR_REJ_CONGESTION,OTA,no,no,no,yes,"This SBP item is designed for controlling behavior of device when receiving reject cause 22 Congestion. <BR>When it is enabled, device will follow LR11 behavior to set abnormal counter to maximal value. <BR>If disabled, it will follow R10 or before behavior to increase the abnormal counter by one and follows the abnormal handling of spec.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If disable, Device follow LR9 behavior<BR>0x1:If enable, Device follows LR11 behavior to set abnormal count to maximum value",,,"To disable this feature, compile option __DISABLE_REL11_LR_REJ_CONGESTION__ must be defined.",,,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 23G in TDD mode<BR>-> Trigger RAU reject with cause 22 <BR>-> UE should set the RAU attempt counter to 5<BR>[Expected Result]<BR>UE should set the RAU attempt counter to 5,Untested,,,,
+6073,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_MM_SEARCH_HPLMN_BEFORE_RPLMN,modem_sbp_config[2].SBP_MM_SEARCH_HPLMN_BEFORE_RPLMN,OTA and OTA BY OP,no,no,no,yes,"This SBP is to allow searching HPLMN before RPLMN during power-on or recover search, to speed-up and camp back to HPLMN. This is related to the EXCEPTION description in the section 4.3.1 of 3GPP TS 23.122 but this SBP takes higher priroty than SIM configuration. H3G requires UE to select HPLMN at power on even in case HPLMN is not the RPLMN. Need to turn on this SBP for H3G IOT. If both SBP_RPLMN_HPLMN_COMBINED_SEARCH and SBP_MM_SEARCH_HPLMN_BEFORE_RPLMN are enabled, HPLMN will be searched first.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __MM_SEARCH_HPLMN_BEFORE_RPLMN__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6074,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_MM_SKIP_LU_AFTER_CSFB_FOR_EAFR,modem_sbp_config[22].SBP_MM_SKIP_LU_AFTER_CSFB_FOR_EAFR,OTA and OTA BY OP,no,no,no,yes,"After CSFB call release, if NW does not provide re-direction information, this SBP item shall decide to skip location updating before going back to LTE as part of automatic fast return to LTE feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:UE shall skip LU after CSFB call release and trigger automatic fast return to LTE feature. If UE could not return to LTE after triggering fast return to LTE, it shall trigger LU after camping back in GSM or UMTS RAT<BR>0:UE shall perform LU after CSFB call release. Alternatively current camped PLMN will be checked in CONFIGURE_SKIP_LU_AFTER_CSFB_FOR_EAFR_PLMN (defined under MM custom config file) to take decision, and will skip LU even SBP is disabled",,,"To enable this feature, compile option __MM_SKIP_LU_AFTER_CSFB_FOR_EAFR__ must be defined",AFR - Autonomous Fast Return,MTK Proprietary,,,Test in machine (Y/N) : N<BR> Test Time (minutes) : NA<BR> [Init] : NA<BR> [Test Step]<BR> Perform CSFB call & click disconnect after 1 mins<BR> [Expected Result]<BR> UE is expected to move to LTE after call release,Pass,,,,
+6075,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_MM_STRICT_PRECONDITION_FOR_REL7_MANUAL_RHPLMN_SEL,modem_sbp_config[29].SBP_MM_STRICT_PRECONDITION_FOR_REL7_MANUAL_RHPLMN_SEL,Not Support,no,no,no,yes,"In order to restrict release 7 optimization that in manual mode UE first searches HPLMN if RPLMN is not available, if the SBP is turned on, only apply the optimization during first power-on.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __MM_STRICT_PRECONDITION_FOR_REL7_MANUAL_RHPLMN_SEL__.,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6076,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_MM_TRY_ABNORMAL_LAI_ONCE_MORE,modem_sbp_config[0].SBP_MM_TRY_ABNORMAL_LAI_ONCE_MORE,OTA and OTA BY OP,no,no,no,yes,"Feature option for Steer of Roaming (Managed Roaming) requirement mentioned in GSMA DEVICE FIELD AND LAB TEST GUIDELINES Section 56. When steering of roaming is used by a home network operator and a roaming mobile device is in automatic network selection mode, the preferred networks are selected by rejecting location update requests in non-preferred networks four times with MM Reject Cause #17. This triggers a new network selection in the mobile device. This SBP is used to support this feature. If this SBP is enabled, as per requirements above, if only one PLMN is available and this PLMN was already rejected four times (i.e. attempt counter >=4), the terminal device shall attempt to access the already rejected network once more. Other related SBP for Steer of Roaming (Managed Roaming): SBP_MM_DISABLE_RETRY_ABNORMAL_LAI, SBP_MM_PERFORM_PLMN_SEARCH_AFTER_LU_ABNORMAL",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6077,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[91].SBP_MOBILITY_BAND_PREFERENCE,modem_sbp_config[91].SBP_MOBILITY_BAND_PREFERENCE,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether LTE apply band preference feature for mobility. Regarding to band preference feature, it's a feature which keeps UE staying at cells with large bandwidth if possible. By configuring NVRAM, customer can define it's own preference of each band accordingly. For example, if customer considers specific frequency as a frequency with small bandwidth under certain operator, customer can define the PLMN and RSRP/RSRQ offset of IDLE/CONNECTED mode. When performing mobility, EAS will take these offsets into consideration to make UE stay at large bandwidth cell as possible.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6078,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_MOBILITY_WB_MEAS_WO_NVM_CHK,modem_sbp_config[96].SBP_MOBILITY_WB_MEAS_WO_NVM_CHK,OTA and OTA BY OP,no,no,no,yes,"This SBP describes if LTE-ERRC configures EL1 to perform wide band detection measurement without checking NVRAM configuration.<BR>(This SBP is not suggested to be enabled for customer, it's for MTK RD internal test only.)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6079,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_MODE_1_PS_ONLY_LTE_NETWORK_SUPPORT,modem_sbp_config[7].SBP_MODE_1_PS_ONLY_LTE_NETWORK_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"This SBP is to stay at network which does not support CS fallback. This kind of network would reject combined attach request from the UE with #18 CS domain not available. It means that when UE mode is PS mode 1 , RAT mode is LTE only and IMS voice is not supported, this SBP allows UE to stay LTE.<BR>You can refer to 3GPP TS 23.221 section 7.2a. A voice centric CSFB capable UE that receives "CSFB Not Preferred" or "SMS-only" indication as a result of combined EPS/IMSI attach or combined TA/LA Update procedures and unable to obtain voice services over IMS shall disable the E-UTRAN capability, which results in re-selecting GERAN or UTRAN.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,This feature is originally controlled by __MODE_1_PS_ONLY_LTE_NETWORK_SUPPORT__ and the network is specified by CUSTOM_PS_ONLY_PLMN.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6080,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_MP_LTE_DOWNLINK_LAA_r13,modem_sbp_config[103].SBP_MP_LTE_DOWNLINK_LAA_r13,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to control downlink LAA r13 capabilities reporting for MP milestone.<BR>Turn on SBP_MP_DOWNLINK_LAA_r13, UE will indicate support of LAA r13 downlink IEs in UECapabilityInformation to network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"To enable this feature, compile option__MP_LTE_DOWNLINK_LAA_r13__must be defined.",LAA,4G,,,"Test in machine (Y)<BR>Test Time (5 minutes) <BR> [Init]<BR> [Test Step] <BR> [Expected Result]<BR> 1), check the UE-EUTRAN-Capability: downlinkLAA-r13<BR> 2), Insert T-Mobile SIM, LAA capability will be supported<BR> 3), Insert other SIM, LAA capability will not be supported",Untested,,,,
+6081,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_MTC_SUPPORT,modem_sbp_config[8].SBP_MTC_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"MTC stands for machine-type communication and can be divided into MM-layer control and SM-layer control.<BR>For SM/ESM layers, MTC provides NW a way to reject UE's access on a certain APN for a specific period of time. Behavieour is different for Rel12 and earlier devices.<BR>For Rel12, when UE receives NW rejection cause #26(Insufficient resource) with timer T3396, the UE can connect to the same APN again only after the timer expires or SIM/USIM is replaced.<BR>For Rel11, when UE receives NW rejection cause #26(Insufficient resource) or #27(Missing or unknown APN) with timer T3396, the UE can connect to the same APN again only after the timer expires, SIM/USIM removed or UE is switched OFF.<BR>Depending on NW's decision, the timer T3396 can last from 2 sec to 72 hr(Note: this is only guidance for NW vendors/operators. In UMOLY there is no limitation on UE side, in LR11 the timer is limited to 72hr).<BR>In our implementation, T3396 timer is further controlled by SBP_MTC_SUPPORT: When SBP_MTC_SUPPORT is on, T3396 would be applied and local rejections may be executed according to spec definitions; when SBP_MTC_SUPPORT is off, UE would ignore the T3396 timer and thus no any local rejections would be performed.<BR>For MM/EMM, only general parts of T3245, T3246, T3346 are implemented. T3245 is to recover from invalid SIM status and reset forbidden PLMN list. T3245 timer value is randomly selected between 12hr and 24hr. T3246 and T3346 provides NW a way to reject UE to access NW for a specific period of time. That is, when UE receives NW reject cause #22(Congestion) with timer value T3246 or T3346, the UE can not access NW until timer expiry, SIM/USIM removal, or some special event occurs. Depends on NW decision, timer value of T3246/T3346 range from 2 sec to 186 min.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"For SM/ESM layers, SBP_MTC_SUPPORT can be switched on/off dynamically.",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6082,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_MT_CSFB_IRAT,modem_sbp_config[88].SBP_MT_CSFB_IRAT,OTA and OTA BY OP,no,no,no,yes,"When MT CSFB fails due to T3417ext expiry, force select 23G to improve MT call performance.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,User could use compile option __DISABLE_SBP_MT_CSFB_IRAT__ to disable this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6083,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_NA_PS_PERFORMANCE_ENH,modem_sbp_config[76].SBP_NA_PS_PERFORMANCE_ENH,OTA and OTA BY OP,no,no,no,yes,"For specific scenario(at North America), will trigger this enhancement. This enhancement will choose proper cell to go to, which may have better performance.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6084,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_NON_PS_SIM_REGISTER_FIRST,modem_sbp_config[73].SBP_NON_PS_SIM_REGISTER_FIRST,OTA and OTA BY OP,no,no,no,yes,"This SBP controls the logic in L4C module. L4C will request RF resource for the registration of non-PS SIM. If non-PS SIM get full RF resource for registration, it can camp on network first without interference in the registration of PS SIM. Normally, this feature will delay the registration time of PS SIM but it may shorten the time to establish data connection on PS SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x01",,,N/A,MD Config,Modem - Customer Requirement,,,In Attached File,Pass,,,,
+6085,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_NOTIFY_MBMSAL_E911_EVENT_USING_EMCS,modem_sbp_config[79].SBP_NOTIFY_MBMSAL_E911_EVENT_USING_EMCS,OTA and OTA BY OP,no,no,no,yes,"Originally, we use AT+EMEVT to notify E911 calback session(start/end) to MBMSAL so that MBMSAL could do corresponding action. Ex.<BR>- Stop MBMS sessions when session is start<BR>- Notify upper layer with "out of service coverage" when session is start<BR>- Notify upper layer with "in service coverage" when session is end<BR>But, some AP don't use AT+EMEVT to inform this event. So we use AT+EMCS instead. When this SBP is enabled, AT+EMCS will notify MBMSAL about start and end of E911 callback session",BIT,1,,1,0x0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x1,,,N/A,(VzW) E911,OP Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes)<BR>[Init] <BR>Make an E911 call while consuming a eMBMS stream.<BR>Perform "30. E911 Interaction VZ_TC_eMBMSIOT_7422"<BR><BR>[Test Step] <BR>1. Select a stream service after eMBMS APP display the service<BR>2. After 1 min of the stream start, use the DUT to originate an E911 call<BR>3. Bring the eMBMS app to foreground<BR>4. Bring the E911 call to foreground, then end the E911 call.<BR>5. Bring back the resident application and select a streaming<BR>6. Stop the stream<BR><BR>[Expected Result]<BR>After step 1, the app start playing streaming<BR>After step 2, The E911 call goes through, The Resident app displays "Out of Coverage" in the log tab<BR>After step 3, Veirfy eMBMS stream session has been stopped running<BR>After step 4, The E911 call ends<BR>After step 5, the app start playing streaming<BR>After step 6, The stream stops",Pass,,,,
+6086,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_NOT_CHANGE_REJECT_CAUSE_0_TO_111,modem_sbp_config[102].SBP_NOT_CHANGE_REJECT_CAUSE_0_TO_111,OTA and OTA BY OP,no,no,no,yes,Don't change reject cause 0 to 111,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,User could use compile option __SBP_NOT_CHANGE_REJECT_CAUSE_0_TO_111__ to enable this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6087,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_NOT_CLEAR_ATT_ATTEMPT_CNT_IN_E2C,modem_sbp_config[80].SBP_NOT_CLEAR_ATT_ATTEMPT_CNT_IN_E2C,OTA and OTA BY OP,no,no,no,yes,"This feature is provided as a work-around for network issue. In MTK design we will clear LTE attach attempt counter when inter-RAT from LTE to C2K. This is to let UE to have more chances to try LTE after inter-RAT back to LTE from C2K. In some network, it will give Attach Reject ESM failure with cause Network failure (38). This causing ping-pong between LTE and C2K in the above design. Hence, this SBP is introduced to not clear attach attempt counter after inter-RAT from LTE to C2K to avoid ping-pong.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Don't clear attach attempt counter during inter-RAT from C2K to LTE<BR>0:Clear attach attempt counter during inter-RAT from C2K to LTE,,,__SBP_NOT_CLEAR_ATT_ATTEMPT_CNT_IN_E2C__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6088,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_NOT_PREFER_HPLMNWACT_INFO,modem_sbp_config[26].SBP_NOT_PREFER_HPLMNWACT_INFO,OTA and OTA BY OP,no,no,no,yes,"Some SIM cards contains EF_HPLMNwACT and the 1st priority RAT is not LTE.<BR>- If SBP is off, the RAT priority for HPLMN will be set by using the information in EF_HPLMNwACT (if exists).<BR>- If SBP is on, the EF_HPLMNwACT will be excluded from the RAT order decision.<BR>For example, assume that HPLMNwACT is 3G->4G->2G and the default RAT order is 4G->3G->2G.<BR>- If SBP is off, UE searches 3G->4G->2G (according to HPLMNwACT) when searching HPLMN.<BR>- If SBP is on, UE ignores the HPLMNwACT and searches by the default RAT order 4G->3G->2G when searching HPLMN.",BIT,1,,1,DEFAULT_VALUE : 0 <BR>__NOT_PREFER_HPLMNWACT_INFO__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __NOT_PREFER_HPLMNWACT_INFO__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6089,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_NOT_REPORT_IMS_UL_DATA_STATUS,modem_sbp_config[23].SBP_NOT_REPORT_IMS_UL_DATA_STATUS,OTA and OTA BY OP,no,no,no,yes,"This SBP enables the removal of IMS PDN Context Status from the bit-mask UL DATA STATUS IE within the GMM Service Request Message.<BR>This requirement is for TMO-US operator wherein, it is required to not establish bearers for IMS PDN during an IRAT procedure from 4G to 3G.<BR>RATDM would drop the IMS Data at 23G to avoid triggering of GMM Service Request message. Therefore the UL Data Status within the Service Request Message will not include the IMS PDN Status.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Do not Report UL data status for IMS PDN<BR>0:Report UL data status for IMS PDN,,,N/A,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6090,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_NOT_SEARCH_IMMEDIATE_IF_FIRST_FOUND_NON_HPPLMN,modem_sbp_config[80].SBP_NOT_SEARCH_IMMEDIATE_IF_FIRST_FOUND_NON_HPPLMN,Not Support,no,no,no,yes,Not trigger PLMN search based on PLMN_FOUND_IND if first PLMN_FOUND_IND is not indicated the highest priority PLMN.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,__NOT_SEARCH_IMMEDIATE_IF_FIRST_FOUND_NON_HPPLMN__,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6091,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_NOT_TRIGGER_AUTO_RESELECTION_WHEN_SET_AUTO_MODE_FROM_MANUAL_MODE,modem_sbp_config[85].SBP_NOT_TRIGGER_AUTO_RESELECTION_WHEN_SET_AUTO_MODE_FROM_MANUAL_MODE,Not Support,no,no,no,yes,"When set auto mode from manual mode, device will trigger auto-reselection. Device will skip RPLMN and search from HPLMN. It follows Spec 23.122, chapter 4.4.3.2 and 4.4.3.2.1. If UE is in roaming scenario and set auto mode from manual mode, it may cost much time to camp on roaming network due to auto-reselection. This SBP is to decide whether device will trigger auto-reselection or not when set auto mode from manual mode. When the SBP is TRUE, device will not trigger auto-reselection but trigger auto-power-on search from the last registered PLMN. Please note that it will violate the Spec requirement. This SBP will not take effect when using test sim or in test mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __NOT_TRIGGER_AUTO_RESELECTION_WHEN_SET_AUTO_MODE_FROM_MANUAL_MODE__,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6092,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_NO_3G_FULL_BAND_SEARCH_DURING_23G_REDIR,modem_sbp_config[57].SBP_NO_3G_FULL_BAND_SEARCH_DURING_23G_REDIR,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, 3G will skip full band search during 2G to 3G redirection procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP is controlled by compile flag __NO_3G_FULL_BAND_SEARCH_DURING_23G_REDIR__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6093,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_NO_3G_FULL_BAND_SEARCH_DURING_CSFB_REDIR,modem_sbp_config[40].SBP_NO_3G_FULL_BAND_SEARCH_DURING_CSFB_REDIR,OTA and OTA BY OP,no,no,no,yes,"When this feature is enabled, 3G will not do full band search during CSFB redirection from LTE",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is enabled by the compile flag __NO_3G_FULL_BAND_SEARCH_DURING_CSFB_REDIR__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6094,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_NO_CHANGERAT_RETRY_FOR_EMERGENCY_CALL_REJECT,modem_sbp_config[55].SBP_NO_CHANGERAT_RETRY_FOR_EMERGENCY_CALL_REJECT,OTA and OTA BY OP,no,no,no,yes,"This feature is to enable/disable change RAT retry for non emergency call number dialled as a emergency call. This feature is specific to Claro Guatemala wherein for example if 911 is not a emergency call in Guatemala and if it gets rejected by network with cause 65, we used to do change RAT retry , but now under SBP it is not done.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,,,,,,Pass,,,,
+6095,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_NO_COLDRESET_AFTER_CDMA_DETECT,modem_sbp_config[40].SBP_NO_COLDRESET_AFTER_CDMA_DETECT,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6096,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_NO_OPTIONAL_RAU_AFTER_CCO_FAILURE,modem_sbp_config[7].SBP_NO_OPTIONAL_RAU_AFTER_CCO_FAILURE,OTA and OTA BY OP,no,no,no,yes,Workaround for T-mobile TC-4.5.2.2 : Inter-Rat Cell Change Order Failure from UMTS Band IV to GSM 1900 and resumption of PS session on return to UMTS. Test case require UE not to perform optional RAU.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:UE shall perform RAU after resumption of PS session post Inter-RAT cell change failure<BR>0x1:UE shall not perform RAU after resumption of PS session post Inter-RAT cell change failure,,,"To enable this feature, compile option __TMO_NO_OPTIONAL_RAU_AFTER_CCO_FAILURE__ must be defined.",,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6097,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_NO_RECOVERY_WHEN_CSINVALID_ON_NONDATASIM_WHEN_IN_VIDLE,modem_sbp_config[82].SBP_NO_RECOVERY_WHEN_CSINVALID_ON_NONDATASIM_WHEN_IN_VIDLE,OTA and OTA BY OP,no,no,no,yes,"If current sim is not data sim, CS sim status is invalid and in virtual idle mode, UE will not perform recovery search when recovery search timer expiry. The behavior will not degrade the peer sim data status.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__NO_RECOVERY_WHEN_CSINVALID_ON_NONDATASIM_WHEN_IN_VIDLE__,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6098,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_NO_SR_TRIGGERED_TAU_DURING_T3411,modem_sbp_config[70].SBP_NO_SR_TRIGGERED_TAU_DURING_T3411,OTA and OTA BY OP,no,no,no,yes,"This SBP feature option is used to not allow immediate TAU triggered by SR if T3411 is running. Since there is no explicit description to prohibit uplink data triggered, or SR triggered TAU from the spec. In MTK proprietary design, we want to process user data as soon as possible for better user experience, so we let SR-triggered TAU during T3411 ongoing in live network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,This SBP could be enabled by defining compile option __NO_SR_TRIGGERED_TAU_DURING_T3411__ in the makefile,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6099,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_NO_SUPPORT_A5_3,modem_sbp_config[4].SBP_NO_SUPPORT_A5_3,OTA and OTA BY OP,no,no,no,yes,"The A5/3 algorithm is one of cipher modes used in GSM after the MS enters dedicated state and starts ciphering. If the MS support A5/3 algorithm, it will report its capability on the CLASSMARK to the network and the network may request the MS to start ciphering using A5/3.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:A5_3support is disabled<BR>0:A5_3 support is enabled,,,"This SBP is defined under flag __NO_SUPPORT_A5_3__, and this flag is defined based on chipsetIf flag is defined, A5_3 support is disabled, else A5_3 support is enabled.",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6100,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_NR_DELAY_BUDGET_REPORTING,modem_sbp_config[103].SBP_NR_DELAY_BUDGET_REPORTING,OTA and OTA BY OP,no,no,no,yes,This SBP is used to control NR Delay Budget Reporting feature support.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,Option 2,5G Architecture,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF Dump,Pass,,,,
+6101,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_NR_OVERHEATING_ASSISTANCE,modem_sbp_config[104].SBP_NR_OVERHEATING_ASSISTANCE,OTA and OTA BY OP,no,no,no,yes,This SBP is used to control NR Overheating Assistance feature support.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,N/A,Option 2,5G Architecture,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF Dump,Pass,,,,
+6102,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_NR_SRS_TX_SWITCH,modem_sbp_config[103].SBP_NR_SRS_TX_SWITCH,Not Support,no,no,no,yes,This SBP is used as a switch of feature NR SRS Tx(Antenna) Switch.<BR>SRS Tx(Antenna) Switch will be supported when this SBP is enabled.<BR>Currently this SBP is useless.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,SRS Tx Antenna Switch,MIMO,,,Not required since MP1 feature will not use SBP.,Untested,,,,
+6103,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_NVRAM_MAP_EMM_CAUSE,modem_sbp_config[88].SBP_NVRAM_MAP_EMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"This feature is to let user map the received network reject cause to other reject cause that user want UE to behave. For example, when UE received reject #7, user does not want UE to behave #7 behavior but want #14 behavior. Then, user can enable this SBP and modify NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID to specify that #7 should be mapped to #14. <BR><BR>One more reminder is that this feature is only applied in real network and not applied if inserting test sim. Verifying every reject cause behavior is very common for IOT or GCF cases. To prevent the IOT/GCF cases failure, MTK will keep following the spec behavior if inserting test sim.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. User can map network reject cause to other reject cause that user want.<BR>0:Disable. Follow spec reject cause handling.,,,User could use compile option __SBP_NVRAM_MAP_EMM_CAUSE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6104,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,modem_sbp_config[96].SBP_NVRAM_MAP_MM_GMM_CAUSE,OTA and OTA BY OP,no,no,no,yes,"This feature is to let user map the received network reject cause to other reject cause that user want UE<BR>to behave. For example, when UE received reject #7, user does not want UE to behave #7 behavior but want #14 behavior.<BR>Then, user can enable this SBP and modify SBP_NVRAM_MAP_MM_GMM_CAUSE to specify that #7 should be mapped to #14.<BR>One more reminder is that this feature is only applied in real network and not applied if inserting test sim.<BR>Verifying every reject cause behavior is very common for IOT or GCF cases. To prevent the IOT/GCF cases failure,<BR>MTK will keep following the spec behavior if inserting test sim.<BR>If SBP_NVRAM_MAP_MM_GMM_CAUSE feature is diabled, the reject cause conversion will be according SBP_MM_CUST_PROC_CAUSE.<BR>If both SBP_NVRAM_MAP_MM_GMM_CAUSE and SBP_MM_CUST_PROC_CAUSE feature are enabled, the priority will be given to SBP_NVRAM_MAP_MM_GMM_CAUSE,<BR>but if reject cause is not converted with SBP_NVRAM_MAP_MM_GMM_CAUSE feature then UE shall apply reject cause conversion according to SBP_MM_CUST_PROC_CAUSE feaure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"{0x0000 ~0x8000}:mm_msg :: MM/GMM OTA message type applied the reject cause conversion.<BR>{0x00 ~0x0a}:mm_cause :The reject cause was received from the network.<BR>{0x00 ~0xff}:new_cause_on_hplmn:The new reject cause for HPLMN<BR>0xff:reserve1:The field is reserved for the future needs<BR>{0x0~0xf],{0x0~0xf},{0x0~0xf}:camp_on_plmn:The camped PLMN which sent the reject cause.<BR>{0x0-0xf},[0x0-0xf},{{0xf-0xf}:sim_plmn:The PLMN ID derived from IMSI.<BR>0xf:reserve2:The field is reserved for the future needs<BR>{ 0x0~0xff }:reserve3:The field is reserved for the future needs<BR>{0~99} {111}:new_cause_on_vplmn : The new reject cause for VPLMN",,,User could use compile option __SBP_NVRAM_MAP_MM_GMM_CAUSE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) 10 mins<BR> [Init]<BR> Configure NVRAM_EF_MM_GMM_REJECT_CAUSE_MAPPING_LID to {2561,7,[0x20,0x60,0x1f],[255,255,255],255,255,255,111,14},<BR><BR> Boot up the device & UE send attach request in 23G.<BR> [Test Step]<BR> Network send attach reject with cause #7. <BR> <BR> [Expected Result]<BR> UE is expected toconvert cause #7 to cause #14 & GPRS remain in service.",Pass,,,,
+6105,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_NWSEL_BACKUP_RPLMN_IN_AUTO_MODE,modem_sbp_config[16].SBP_NWSEL_BACKUP_RPLMN_IN_AUTO_MODE,OTA and OTA BY OP,no,no,no,yes,The UE backups previous registered PLMN when receiving network reject or abnormal cases for following search to use in auto mode.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6106,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_NWSEL_CUSTOMIZE_EHPLMN,modem_sbp_config[34].SBP_NWSEL_CUSTOMIZE_EHPLMN,OTA and OTA BY OP,no,no,no,yes,Add customized EHPLMN(defined in custom_gmss_config.c) for network selection purpose.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6107,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_NWSEL_DISABLE_STORED_RPLMN_FROM_NVRAM,modem_sbp_config[73].SBP_NWSEL_DISABLE_STORED_RPLMN_FROM_NVRAM,OTA and OTA BY OP,no,no,no,yes,"When turn-off this SBP and UE power-on in manaul mode with no previous registered PLMN and no valid registered PLMN , UE uses stored registered PLMN from NVRAM as search target, to prevent the issue that manual selection mode without search target.<BR>This SBP is only applied for non test SIM and non test mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __NWSEL_DISABLE_STORED_RPLMN_FROM_NVRAM__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6108,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_NWSEL_DO_NOT_SEARCH_NEXT_FOR_REJ_12,modem_sbp_config[25].SBP_NWSEL_DO_NOT_SEARCH_NEXT_FOR_REJ_12,OTA and OTA BY OP,no,no,no,yes,"Following the TS24.008 and 24.301, UE shall enter LIMITED_SERVICE state. However, to enhance the user experience, UE will search the next PLMN/RAT when a non-test SIM is inserted and this SBP is off.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __NWSEL_DO_NOT_SEARCH_NEXT_FOR_REJ_12__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6109,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_NWSEL_EARLY_AVAILABLE_PLMN_SEARCH,modem_sbp_config[99].SBP_NWSEL_EARLY_AVAILABLE_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turned on, UE will search available PLMNs found before fullband scan is finished.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
6110,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_NWSEL_HISTORY_IGNORE_ABNORMAL_REJECT_EPLMN_IN_RPLMN_SEARCH,modem_sbp_config[82].SBP_NWSEL_HISTORY_IGNORE_ABNORMAL_REJECT_EPLMN_IN_RPLMN_SEARCH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore previously abnormal/rejected EPLMN in RPLMN search bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6111,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_NWSEL_HISTORY_KEEP_REG_SUCCUSS_INFO,modem_sbp_config[34].SBP_NWSEL_HISTORY_KEEP_REG_SUCCUSS_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureKeep LTE registration success information to ignore abnormal/reject casebit 0:0:Turn-off. Update abnormal/reject case as defaultbit 1:1:Turn-on. Keep LTE registration success information to ignore abnormal/reject case",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6112,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_NWSEL_HISTORY_RESET_LTE_REG_COUNTER_AFTER_POWERON,modem_sbp_config[33].SBP_NWSEL_HISTORY_RESET_LTE_REG_COUNTER_AFTER_POWERON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReset LTE registration counter in histiry table after power-onbit 0:0:Turn-off. Keep LTE registration counter in histiry table after power-on as defaultbit 1:1:Turn-on. Reset LTE registration counter in histiry table after power-on",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6113,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_NWSEL_IGNORE_IMS_REG_STATUS_FOR_PS_PREF,modem_sbp_config[64].SBP_NWSEL_IGNORE_IMS_REG_STATUS_FOR_PS_PREF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore IMS registration status for VDP is set to IMS_PS_VOICE_PREFERRED_CS_VOICE_AS_SECONDARYbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6114,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_NWSEL_INCREMENTAL_LTE_DISABLE_FOR_NW_REJ,modem_sbp_config[27].SBP_NWSEL_INCREMENTAL_LTE_DISABLE_FOR_NW_REJ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo save power, incrementally extend LTE disable timer to {3,30,120,720} minute for the {1st,2nd,3rd,4th and later} attempt.bit 0:0:Turn-off. Not extend LTE disable timer incrementallybit 1:1:Turn-on. Extend LTE disable timer incrementally",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6115,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_NWSEL_QUICK_SEARCH,modem_sbp_config[63].SBP_NWSEL_QUICK_SEARCH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo enable quick search feature to enhance the roaming performancebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6116,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_NWSEL_SEARCH_23G_LIMITED_SERVICE_FIRST,modem_sbp_config[30].SBP_NWSEL_SEARCH_23G_LIMITED_SERVICE_FIRST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTry to camp on 23G networks first rather than LTE in limited service.bit 0:0:Turn-off. UE searches 4G when IMS is supportedbit 1:1:Turn-on. UE searches 23G even when IMS is supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6117,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_NWSEL_SEARCH_ALL_EHPLMN_TOGETHER,modem_sbp_config[29].SBP_NWSEL_SEARCH_ALL_EHPLMN_TOGETHER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE searches all EHPLMNs together regardless priority.bit 0:0:Disabled. UE searches each EHPLMN according to prioritybit 1:1:Enabled. UE searches all EHPLMN at the same time",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6118,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_NWSEL_SEARCH_ALL_EQ_PLMN_TOGETHER,modem_sbp_config[86].SBP_NWSEL_SEARCH_ALL_EQ_PLMN_TOGETHER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE searches all EQ_PLMNs together.bit 0:0:Disabled. UE searches each EQ_PLMN one by onebit 1:1:Enabled. UE searches all EQ_PLMNs together",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6119,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_NW_BSRVCC_SUPPORT_CHECK,modem_sbp_config[76].SBP_NW_BSRVCC_SUPPORT_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl if delay bSRVCC based on NW capabilitybit 0:0:Always allow bSRVCCbit 1:1:Delay bSRVCC until check NW support or call alerting",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (minutes) <BR> [Init] <BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6120,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_OMIT_ESM_INFORMATION_FLAG,modem_sbp_config[18].SBP_OMIT_ESM_INFORMATION_FLAG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureESM information procedure is not supported by some network. By enabling SBP_OMIT_ESM_INFORMATION_FLAG, UE will omit doing ESM information procedure with network.bit 0:0:Disable: APN and PCO will be transferred by ESM information procedure.bit 1:1:Enabled: APN and PCO are transferred to network directly in initial attach PDN connectivity request",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>Use OP06 or OP147 <BR>[Test Step] <BR>UE initial attach PDN connectivity request to network<BR>[Expected Result]<BR>UE will omit doing ESM information procedure with network. Saying that if SBP_OMIT_ESM_INFORMATION_FLAG is on, UE will compose both APN and PCO (if provided) in initial attach PDN connectivity request directly to omit doing ESM information procedure with network.",Pass,,,,
-6121,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_OMIT_PTMSI_TYPE_FOR_TESTSIM,modem_sbp_config[17].SBP_OMIT_PTMSI_TYPE_FOR_TESTSIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureOmit sending PTMSI Type for Test SIMbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:PMTSI is omitted in RAU request<BR>0:PTMSI is used in RAU request,,,__OMIT_PTMSI_TYPE_FOR_TESTSIM__,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6122,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_ONE_APN_FOR_ONE_PDN,modem_sbp_config[35].SBP_ONE_APN_FOR_ONE_PDN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to allow UE to establish multiple PDNs using the same APNbit 0:0:UE is allowed to establish multiple PDN connections using the same APN.bit 1:1:UE is not allowed to establish multiple PDN connections using the same APN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6123,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_ONLY_ADD_FTAI_TO_EMC_LIST,modem_sbp_config[72].SBP_ONLY_ADD_FTAI_TO_EMC_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureOnly add FTAI to emergency FTAI lists if FTAI need to be added during emergencybit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Only add FTAI to emergency FTAI list.<BR>0:Add FTAI to both emergency and normal FTAI list..,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6124,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_OOS_EARLY_IND,modem_sbp_config[0].SBP_OOS_EARLY_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure early OOS indication reportingbit 0:0:Early OOS indication reporting is disabledbit 1:1:Early OOS indication reporting is enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Modem report Out of service immediately after loss of coverage<BR>0:After out of service lower layer perform search if not cell found then report Modem report Out of service.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] Perfrom OOS <BR>[Test Step] UE move to OOS<BR>[Expected Result] Modem report OOS to AP,Pass,,,,
-6125,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_OP01_AT_SUPPORT,modem_sbp_config[12].SBP_OP01_AT_SUPPORT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuretest AT commands for OP01bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,Dependent to compile option __OP01__,MD Config,Modem - Customer Requirement,,,"[Init] <BR>load: op01 load <BR>sim card:CMCC card<BR> [Test Step] <BR>send at command such as AT^DSCI,AT^MTV? to modem<BR> [Expected Result]<BR>modem can handle AT command",Pass,,,,
-6126,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_OP01_COMMON_FEATURE,modem_sbp_config[11].SBP_OP01_COMMON_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis feature option is used to enable CMCC (OP01) miscellaneous common features to pass CMCC certificatesbit 0:0:Not Supported OP01 Common Featurebit 1:1:Supported OP01 Common Feature",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR><BR>Run PCT regression test,Pass,,,,
-6127,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_OP01_ROAMING_RAT_ORDER,modem_sbp_config[5].SBP_OP01_ROAMING_RAT_ORDER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This SBP is not used anymore.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6128,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_OP01_SIM_LOCK,modem_sbp_config[65].SBP_OP01_SIM_LOCK,Not Support,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureCheck card type and restrict non-cmcc card's capabilitybit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"not support MCF, no need to test",Untested,,,,
-6129,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_OP01_TEST_MODE_CONSIDER_SIM,modem_sbp_config[6].SBP_OP01_TEST_MODE_CONSIDER_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureOP01_TEST_MODE_CONSIDER_SIMbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,value dependent to compile option __OP01__,,,,,Test in machine <BR>[Init] <BR>op01 load insert test sim<BR>[Test Step] <BR>GCF case 9.2.2.1.4<BR> [Expected Result] <BR>case pass,Pass,,,,
-6130,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_OP09_C2K,modem_sbp_config[33].SBP_OP09_C2K,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChina Telecom C2K featurebit 0:0:Disabled. China Telecom C2K feature is not supported.bit 1:1:Enabled. China Telecom C2K feature is supported.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6131,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_OP09_LTE_ROAMING,modem_sbp_config[26].SBP_OP09_LTE_ROAMING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLYA.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_OP09_SIM_LOCK,modem_sbp_config[15].SBP_OP09_SIM_LOCK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This SBP is not used anymore.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6133,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_OP12_17OCT,modem_sbp_config[101].SBP_OP12_17OCT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis SBP enables the implement of 2017OCT VzW requirement but we do not release to customer. => Should phase out in Gen93 also phased out in Gen97.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,(VzW) Power-on and SIM Activation,OP Requirement,,,,Untested,,,,
-6134,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_OP12_C2K,modem_sbp_config[33].SBP_OP12_C2K,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureVerizon Wireless C2K featurebit 0:0:Disable Verizon Wireless C2K feature.bit 1:1:Enable Verizon Wireless C2K feature.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6111,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_NWSEL_HISTORY_KEEP_REG_SUCCUSS_INFO,modem_sbp_config[34].SBP_NWSEL_HISTORY_KEEP_REG_SUCCUSS_INFO,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, UE would not clear the registration success information in history table. Ex: If PLMN A has been registered successfully before, enabling this SBP will keep this information even if UE fails to register on PLMN A later.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __NWSEL_HISTORY_KEEP_REG_SUCCUSS_INFO__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6112,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_NWSEL_HISTORY_RESET_LTE_REG_COUNTER_AFTER_POWERON,modem_sbp_config[33].SBP_NWSEL_HISTORY_RESET_LTE_REG_COUNTER_AFTER_POWERON,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, we will reset the LTE REG counter in history record after power-on.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __NWSEL_HISTORY_RESET_LTE_REG_COUNTER_AFTER_POWERON__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6113,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_NWSEL_IGNORE_IMS_REG_STATUS_FOR_PS_PREF,modem_sbp_config[64].SBP_NWSEL_IGNORE_IMS_REG_STATUS_FOR_PS_PREF,OTA and OTA BY OP,no,no,no,yes,"When UE receives EPS only attach accept with cause #18, and IMS is not registered, UE will disable EUTRAN. If the SBP is turned on and UE's VDP is IMS_PS_VOICE_PREFERRED_CS_VOICE_AS_SECONDARY, UE will ignore the IMS registration status. That is, UE will not disable EUTRAN when UE receives EPS only attach accept with #18 and IMS is not registered.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6114,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_NWSEL_INCREMENTAL_LTE_DISABLE_FOR_NW_REJ,modem_sbp_config[27].SBP_NWSEL_INCREMENTAL_LTE_DISABLE_FOR_NW_REJ,OTA and OTA BY OP,no,no,no,yes,"To save power, incrementally extend LTE disable timer to {3,30,120,720} minute for the {1st,2nd,3rd,4th and later} attempt.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __NWSEL_INCREMENTAL_LTE_DISABLE_FOR_NW_REJ__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6115,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_NWSEL_QUICK_SEARCH,modem_sbp_config[63].SBP_NWSEL_QUICK_SEARCH,Not Support,no,no,no,yes,"If this SBP and SBP_FAST_ROAMING_SEARCH are both turned on, UE will enable quick search for auto mode power on search for roaming performance. If quick search is enabled, the quick search stage will be added into the original stored search and fullband search stages. Quick search introduces a quick fullband search which only search limited number of sub-bands with strongest power.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,"if compile option __DISABLE_NWSEL_QUICK_SEARCH__ is defined, the SBP is disabled",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6116,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_NWSEL_SEARCH_23G_LIMITED_SERVICE_FIRST,modem_sbp_config[30].SBP_NWSEL_SEARCH_23G_LIMITED_SERVICE_FIRST,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to let UE choose to camp on 23G RAT first over LTE even if IMS is supported. When this SBP is enabled,<BR>UE will try to camp on 23G networks first rather than LTE in limited service.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6117,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_NWSEL_SEARCH_ALL_EHPLMN_TOGETHER,modem_sbp_config[29].SBP_NWSEL_SEARCH_ALL_EHPLMN_TOGETHER,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turend on, UE just searches all EHPLMNs together regardless priority.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __NWSEL_SEARCH_ALL_EHPLMN_TOGETHER__.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6118,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_NWSEL_SEARCH_ALL_EQ_PLMN_TOGETHER,modem_sbp_config[86].SBP_NWSEL_SEARCH_ALL_EQ_PLMN_TOGETHER,OTA and OTA BY OP,no,no,no,yes,Search EPLMN according to power level (together) or according to priority.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6119,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_NW_BSRVCC_SUPPORT_CHECK,modem_sbp_config[76].SBP_NW_BSRVCC_SUPPORT_CHECK,OTA and OTA BY OP,no,no,no,yes,"This feature could prevent VOLTE call fails due to too early SRVCC. For customized PLMNs, UE delays new B1/B2 measurement report to alerting phase if bSRVCC not supported.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (minutes) <BR> [Init] <BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6120,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_OMIT_ESM_INFORMATION_FLAG,modem_sbp_config[18].SBP_OMIT_ESM_INFORMATION_FLAG,OTA and OTA BY OP,no,no,no,yes,"ESM information procedure is not supported by some network. By enabling SBP_OMIT_ESM_INFORMATION_FLAG, UE will omit doing ESM information procedure with network. Saying that if SBP_OMIT_ESM_INFORMATION_FLAG is on, UE will compose both APN and PCO (if provided) in initial attach PDN connectivity request directly to omit doing ESM information procedure with network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,"if enablng compile option __OMIT_ESM_INFORMATION_TRANSFER_FLAG__, SBP_OMIT_ESM_INFORMATION_FLAG will be turned on also.",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>Use OP06 or OP147 <BR>[Test Step] <BR>UE initial attach PDN connectivity request to network<BR>[Expected Result]<BR>UE will omit doing ESM information procedure with network. Saying that if SBP_OMIT_ESM_INFORMATION_FLAG is on, UE will compose both APN and PCO (if provided) in initial attach PDN connectivity request directly to omit doing ESM information procedure with network.",Pass,,,,
+6121,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_OMIT_PTMSI_TYPE_FOR_TESTSIM,modem_sbp_config[17].SBP_OMIT_PTMSI_TYPE_FOR_TESTSIM,OTA and OTA BY OP,no,no,no,yes,"To determine whether to bring P-TMSI type in RAU request or not. Theoretically we should always bring it, but for GCF test case, we may need to omit it because machine do not support.<BR>This feature is only applicable for Test SIM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:PMTSI is omitted in RAU request<BR>0:PTMSI is used in RAU request,,,"To enable this feature, compile option __OMIT_PTMSI_TYPE_FOR_TESTSIM__ must be defined",,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6122,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_ONE_APN_FOR_ONE_PDN,modem_sbp_config[35].SBP_ONE_APN_FOR_ONE_PDN,OTA and OTA BY OP,no,no,no,yes,"According to some operator requirements, UE is not allowed to establish multiple PDN connections using the same APN. This feature is to check if the requested APN from the upper layer is in use for an existing PDN connection. If this feature is enabled, a new PDN connection request with an already used APN from the upper layer will be rejected by Modem.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,We could define the compile option __SBP_ONE_APN_FOR_ONE_PDN__ in the makefile to set the setting as enabled by default.,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6123,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_ONLY_ADD_FTAI_TO_EMC_LIST,modem_sbp_config[72].SBP_ONLY_ADD_FTAI_TO_EMC_LIST,OTA and OTA BY OP,no,no,no,yes,"Only add TA to emergency FTAI lists if UE needs to add FTAI due to reject or abnormal during emergency. For example, in the scenario that UE gets emergency attach reject #15, but there is only one TA. If this TA is added to also to normal FTAI list according to TS 24.301, UE will not be abled to camp on LTE again after emergency. To improve user experience, FTAI is only added to emergency FTAI list. That is, previous FTAI during emergency will not be effective in normal service. And UE has another chance to try<BR>LTE again in normal service.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Only add FTAI to emergency FTAI list.<BR>0:Add FTAI to both emergency and normal FTAI list..,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6124,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_OOS_EARLY_IND,modem_sbp_config[0].SBP_OOS_EARLY_IND,OTA and OTA BY OP,no,no,no,yes,"By default modem reports out of service only when lost coverage and cant find any other cell by sending PLMN loss indication from AS<BR>After turn on this feature, modem will report out of service immediately after OOS(Out Of Service) detection.<BR>3GPP 25.133 4.2.2.1<BR>1.When 3G serving cell treated as unsuitable<BR>- a)When UE is in IDLE/CELL_PCH/URA_PCH States,UE starts OOS count-down timer.<BR>- b)When UE is in CELL_FACH state, UE start a 4 second OOS count-down timer<BR>2.Out of service indication - After OOS timer expiry serving cell is treated as unsuitable and OOS indication is sent<BR>- a)Stored only search if SBP_FAST_ROAMING_SEARCH is enabled<BR>- b)STORED+FULL band search if SBP_FAST_ROAMING_SEARCH is disabled<BR>3.PLMN loss indication - If No suitable cell found after this search, PLMN loss indication is reported<BR>1.When 2G cell considered unsuitable<BR>- 3GPP spec 45.008 6.4<BR>2.When Out of service indication is reported to NAS<BR>- If RRM is IDLE and cell reselection happened due to C1/C2(45.008 6.4) or abnomal(DSF,RLF,T3116)<BR>- does not find any neighbour cell to camp on then RRM goes to cell selection and report OOS indication<BR>3.PLMN loss indication is reported<BR>- After OOS indication sent RRM starts stored list search and if result in failure to find any cell<BR>- RRM reports PLMN Loss",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Modem report Out of service immediately after loss of coverage<BR>0:After out of service lower layer perform search if not cell found then report Modem report Out of service.,,,"To enable this feature, compile option __OOS_EARLY_IND__ must be defined.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] Perfrom OOS <BR>[Test Step] UE move to OOS<BR>[Expected Result] Modem report OOS to AP,Pass,,,,
+6125,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_OP01_AT_SUPPORT,modem_sbp_config[12].SBP_OP01_AT_SUPPORT,OTA,no,no,no,yes,"This SBP item used to support test AT command defined in At_custom_cmd_op01.h,including AT^DSCI/AT^MTV/AT^SYSINFO/AT^SYSCONFIG/AT^CARDMODE/AT^RFSW/AT^SPN/AT^HVER/AT^CMDVER/AT^OFF.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __OP01__ .,MD Config,Modem - Customer Requirement,,,"[Init] <BR>load: op01 load <BR>sim card:CMCC card<BR> [Test Step] <BR>send at command such as AT^DSCI,AT^MTV? to modem<BR> [Expected Result]<BR>modem can handle AT command",Pass,,,,
+6126,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_OP01_COMMON_FEATURE,modem_sbp_config[11].SBP_OP01_COMMON_FEATURE,OTA and OTA BY OP,no,no,no,yes,This feature option is used to enable CMCC (OP01) miscellaneous common features.<BR>Enable this feature means that UE can pass CMCC certificates.,BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR><BR>Run PCT regression test,Pass,,,,
+6127,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[5].SBP_OP01_ROAMING_RAT_ORDER,modem_sbp_config[5].SBP_OP01_ROAMING_RAT_ORDER,OTA and OTA BY OP,no,no,no,yes,Obsolete. This SBP is not used anymore.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6128,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_OP01_SIM_LOCK,modem_sbp_config[65].SBP_OP01_SIM_LOCK,Not Support,no,no,no,no,"This SBP is used to fulfill the requirement from operator as following.<BR>If cmcc card and non-cmcc card inserted,non-cmcc card can not work as primary card and will get 2g service only. If non-cmcc work as primary card,L4 will triger detach request and non-cmcc change to no service. If non-cmcc work as secondary card,L4 will check it's rat mode setting and restrict to 2G service.<BR>However,if cmcc card is disabled, non-cmcc card's capability will not be restricted.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"not support MCF, no need to test",Untested,,,,
+6129,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_OP01_TEST_MODE_CONSIDER_SIM,modem_sbp_config[6].SBP_OP01_TEST_MODE_CONSIDER_SIM,OTA and OTA BY OP,no,no,no,yes,"This SBP item used to makesure UE behaviors will not be affected in GCF and NS-IOT test. If this SBP item is enable and test sim inserted, PS conformance test mode should be treated as FTA mode when PS conformance test mode is not specified.<BR><BR>UE behaviors that different in FTA mode from other modes are shown below: <BR>- UE will map ebi to CID. <BR>- UE will not restart T3402 when power on,and UE will ignore VzW failure list. <BR>- In CMCC NS-IOT test, UE will not trigger TAU after receive PDN disconnect reject from network.<BR>- GCF test do not support TS24.301 5.3.7b ,UE will have the same action as R9. <BR>- UE will not locally release all bearers when receive message from network indicates last PDN deactivation reject.<BR>- EMM Detach retransmission counter enhancement mechanism will turn off in FTA mode.<BR>- Reject cause in emm attach reject message can not be customized in FTA mode.<BR>- The PDN connectivity request/PDN disconnect request retry times is set to 5(normally this value is 1).<BR>- In any mode except FTA mode if PDN is set without APN, ue will response bearer map fail. <BR>- In any mode except FTA mode when SBP_LTE_AUTH_REJ_MAPPING_TO_15 is only if UE receive authentication reject with any cause,UE will treat it as cause #15.<BR>- In any mode except FTA mode if PDN is set without APN,ue will response bearer map fail. <BR>- In any mode except FTA mode if SBP_DISABLE_BEARER_RSC_ALLOC/SBP_DISABLE_BEARER_RSC_MOD is on, EPS bearer operation will be controlled by network, UE will reject bearer_rsc_alloc_req/bearer_rsc_mod_req from upper layer.<BR>- For GCF case 9.2.2.1.4,when T3340 is running and UE need to send detach request, UE will stop T3340. <BR>- IE PCO plain part is contained in IA PDN connectivity request message,cipher part is contained in ESM info response message.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,eCall,MTK Proprietary,,,Test in machine <BR>[Init] <BR>op01 load insert test sim<BR>[Test Step] <BR>GCF case 9.2.2.1.4<BR> [Expected Result] <BR>case pass,Pass,,,,
+6130,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_OP09_C2K,modem_sbp_config[33].SBP_OP09_C2K,OTA and OTA BY OP,no,no,no,yes,"This SBP controls whether the UE supports C2K related features required by China Telecom.<BR>In current design, when this feature is enabled, UE will use CT's policy instead of EF_MSPL/EF_MLPL to perform multi-mode system selection between 3GPP and 3GPP2 network. It also enable SRLTE feature in CT's network if product support SRLTE.<BR>When this feature is disabled, for OM products, CT C2K features are still supported if CT SIM is inserted.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,User could use compile option __OP09_C2K__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6131,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[26].SBP_OP09_LTE_ROAMING,modem_sbp_config[26].SBP_OP09_LTE_ROAMING,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_OP09_SIM_LOCK,modem_sbp_config[15].SBP_OP09_SIM_LOCK,OTA and OTA BY OP,no,no,no,yes,"This feature is to restrict SIM1 slot in China Telecom SIM card. If inserted SIM1 is not China Telecom SIM, user can not access normal service.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,The setting of this SBP could be set to "enable" by defining compile option __OP09_SIM_LOCK__ in the makefile,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6133,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_OP12_17OCT,modem_sbp_config[101].SBP_OP12_17OCT,Not Support,no,no,no,yes,This is used to control if UE turn on VzW 2017 OCT requirements <BR>SBP enable will enable VzW 2017 OCT requirements<BR>This SBP should enable and not close in the feature (not suggest to be changed by customer) <BR><BR>(1) VzW data retry 7775<BR>(2) VzW Dataretry 40042<BR>(3) VzW dataretry 7780,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,(VzW) Power-on and SIM Activation,OP Requirement,,,,Untested,,,,
+6134,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_OP12_C2K,modem_sbp_config[33].SBP_OP12_C2K,OTA and OTA BY OP,no,no,no,yes,"When this feature enabled, UE will apply VzW CDMA feature.Currently this setting only affects below parameters of telescope MPSR.<BR>- Telescope MPSR max stage change to 3<BR>- Telescope MPSR repeat counter change to 3<BR>- Telescope MPSR multiplier change to 2<BR>For example, when enabled this feature, the telescope MPSR period will becomes 30, 30, 30, 60, 60, 60, 120, 120, 120, 120...seconds if MPSR based duration is 30 seconds and MPSR max duration is 120 seconds. Currently the default MPSR based duration and MPSR max duration are 120 seconds.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,User could use compile option __OP12_C2K__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
6135,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_OP12_DISABLE_LTE_ROAMING,modem_sbp_config[33].SBP_OP12_DISABLE_LTE_ROAMING,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable LTE band 4/5 for Verizon device when roaming.bit 0:0:Turn-off. Do not turn off any LTE bandbit 1:1:Turn-on. Disable LTE band 4/5 when roaming",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6136,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_OPTIMIZATION_FOR_DRX_CYCLE_COEF_CHANGE,modem_sbp_config[100].SBP_OPTIMIZATION_FOR_DRX_CYCLE_COEF_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen CS and PS is configured with diff DRX Cycle length then select the minimun of bothbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,MD Config,Modem - Customer Requirement,,,"1. The changes are guarded under SBP_OPTIMIZATION_FOR_DRX_CYCLE_COEF_CHANGE and by default this SBP is OFF. <BR>To set this SBP, please enable the compilation option __OPTIMIZATION_FOR_DRXCYCLELENGTH_CHANGE__ in makefile<BR>Currently the changes are for China PLMN 46001, if this change needs to be extended for more PLMNs, the respective <BR>PLMNs can be added in custom_rrc_config.c file under CUSTOM_DRX_CYCLE_LENGTH_CHANGE_FOR_PLMN_LIST.<BR>2. Suppose CS alone is attached. <BR>3. Suppose SBP is off.<BR>4. Provide different value to CS Domain DRXCycleLength and PS domain DRXCycleLength in SIB1. <BR>5. If CS Domain DRXCycleLength is more than PS domain DRXCycleLength, then UE would configure CS Domain DRXCycleLength and N/W won't be in sync with UE and some paging might be missed.<BR>5. Suppose SBP is on.<BR>6. Repeat step 4.<BR>7. If CS Domain DRXCycleLength is more than PS domain DRXCycleLength, then UE would configure minimum of CS Domain DRXCycleLength and PS Domain DRXCycleLength i.e. UE would configure PS Domain DRXCycleLength and N/W would be in sync with UE.",Untested,,,,
-6137,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_ORANGE_HPPLMN_DEFAULT_TIMER,modem_sbp_config[24].SBP_ORANGE_HPPLMN_DEFAULT_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet the default value of higher priority PLMN search timer to 18-minute.bit 0:0:Turn-off. Not set the HPPLMN timer to 18 minbit 1:1:Turn-on. Set the HPPLMN timer to 18 min",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6138,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_ORANGE_H_PLUS,modem_sbp_config[3].SBP_ORANGE_H_PLUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to display H+ icon accoridng to Orange requirement",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6139,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_PAGING_MONITOR_TIMEOUT_TO_GEOSCAN,modem_sbp_config[53].SBP_PAGING_MONITOR_TIMEOUT_TO_GEOSCAN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureforce to do a GEO scan when paging timeoutbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6140,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_PAM_CAUSE65_SUPPORT,modem_sbp_config[13].SBP_PAM_CAUSE65_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to support the handling of SM/ESM reject cause value 65 (maximum number of bearers reached)bit 0:0:UE does not support the handling of SM/ESM reject cause value 65.bit 1:1:UE supports the handling of SM/ESM reject cause value 65.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6141,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_PAM_OP08_SELECT_EMERGENCY_PDN_TYPE,modem_sbp_config[57].SBP_PAM_OP08_SELECT_EMERGENCY_PDN_TYPE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete because the handling of emergency PDN type selection is moved to another modulebit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6142,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_PAM_OP147_BACKOFF_TIMER_DEFAULT_VALUE,modem_sbp_config[60].SBP_PAM_OP147_BACKOFF_TIMER_DEFAULT_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet Default Back-Off Timer Value as 4 Hours for Cause #27 When Back-Off Timer Not Presentbit 0:0:UE follows the back-off mechanism as specified in TS24.301 when receiving ESM cause #27 in the PDN CONNECTIVITY REJECT where NW does not include the back-off timer IE.bit 1:1:UE starts the back-off timer with 4-hour timer length when receiving ESM cause #27 in the PDN CONNECTIVITY REJECT where NW does not include the back-off timer IE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6143,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_PERFORM_COMBINED_SEARCH_DURING_CSFB,modem_sbp_config[74].SBP_PERFORM_COMBINED_SEARCH_DURING_CSFB,OTA and OTA BY OP,no,no,no,no,This feature enables UE to performcombined search(redirected + stored) during CSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6144,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_PERMANENT_AUTO_SEL_MODE,modem_sbp_config[0].SBP_PERMANENT_AUTO_SEL_MODE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePermanent Auto Selection Modebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"After manual selection an unavailable PLMN, UE can still perform auto selection for a while",Pass,,,,
-6145,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_PIB_SYNC_TO_PLMN_LIST_WITH_DIFF_REMOVAL,modem_sbp_config[38].SBP_PIB_SYNC_TO_PLMN_LIST_WITH_DIFF_REMOVAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to remove blocked EPLMN during the running period of back-off timer if it is not in the latest EPLMN listbit 0:0:The blocked EPLMN list remains intact during the running period of the back-off timer.bit 1:1:A blocked EPLMN can be removed from the back-off timer in some case.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6146,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_PINGPONG_AVOIDANCE_ENH,modem_sbp_config[82].SBP_PINGPONG_AVOIDANCE_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl if pingpong history table is enabled for avoiding reselection pingpongbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__PINGPONG_AVOIDANCE_ENH_DISABLED__,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (minutes) <BR>[Init] <BR>[Test Step] <BR>[Expected Result],Pass,,,,
-6147,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_PLMNLIST_ENHANCE_WHEN_NO_IMS_PDN,modem_sbp_config[67].SBP_PLMNLIST_ENHANCE_WHEN_NO_IMS_PDN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnhance the PLMN list when there is no IMS PDNbit 0:0:Disable. Do not enhance the PLMN list when there is no IMS PDN.bit 1:1:Enabled. Enhance the PLMN list when there is no IMS PDN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Enhance the PLMN list when there is no IMS PDN.<BR>0:Disable. Do not enhance the PLMN list when there is no IMS PDN.,,,__ENABLE_PLMNLIST_ENHANCE_WHEN_NO_IMS_PDN__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6148,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_PLMNLIST_IN_CONNECTED_MODE,modem_sbp_config[28].SBP_PLMNLIST_IN_CONNECTED_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureImprove user PLMN LIST in connected modebit 0:0:Disable. Do PLMN LIST until connection releasedbit 1:1:Enabled. Release the connection to do PLMN LIST",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Release the connection to do PLMN LIST.<BR>0:Disable. Do PLMN LIST until connection released.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6149,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_PLMN_LIST_IGNORE_PS_PAGING_WHEN_IMS_DEREG,modem_sbp_config[69].SBP_PLMN_LIST_IGNORE_PS_PAGING_WHEN_IMS_DEREG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIgnore PS paging to speed up PLMN LIST when IMS is not registeredbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Ignore PS paging to speed up PLMN LIST when IMS is not registered.<BR>0:Disable. Don't ignore PS paging to speed up PLMN LIST when IMS is not registered.,,,__DISABLE_PLMN_LIST_IGNORE_PS_PAGING_WHEN_IMS_DEREG__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6150,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_PLMN_LIST_IN_VIRTUAL_MODE,modem_sbp_config[30].SBP_PLMN_LIST_IN_VIRTUAL_MODE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable PLMN list in virtual mode.bit 0:0:Turn-off. Do not enable PLMN list in virtual modebit 1:1:Turn-on. Enable PLMN list in virtual mode",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6151,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_PLMN_LIST_WITHOUT_ABORT_DATA_TRANSFER,modem_sbp_config[42].SBP_PLMN_LIST_WITHOUT_ABORT_DATA_TRANSFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBlock PLMN List during data transferbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,,,,,"When data is ongoing, AT+COPS=? (PLMN List) cannot be performed",Pass,,,,
-6152,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_PLMN_SEARCH_ABORT_SUPPORT,modem_sbp_config[11].SBP_PLMN_SEARCH_ABORT_SUPPORT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Not support any mmorebit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6153,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_POPLMN_EQUAL_PRIORITY_IN_FAST_ROAMING,modem_sbp_config[68].SBP_POPLMN_EQUAL_PRIORITY_IN_FAST_ROAMING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger fast roaming when the found PLMN is a POPLMN without consideration of prioritybit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6154,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_POWER_ON_STORED_LIST_SEARCH,modem_sbp_config[65].SBP_POWER_ON_STORED_LIST_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable power-on stored list searchbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~8,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-6155,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_PREDICT_SEARCH_MECHANISM,modem_sbp_config[97].SBP_PREDICT_SEARCH_MECHANISM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNWSEL will set a bit to ask xRRC to search extra ARFCNs where UE has higher probability to find a cellbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6156,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_PREFER_3G_IN_23G_MODE,modem_sbp_config[58].SBP_PREFER_3G_IN_23G_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] The purpose of this SBP is to prefer 3G in 23G mode",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6157,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_PREFER_HIGH_PRIO_3G_IN_23G_MODE,modem_sbp_config[67].SBP_PREFER_HIGH_PRIO_3G_IN_23G_MODE,OTA and OTA BY OP,no,no,no,yes,"Sometimes in dual mode GSM/WCDMA, NW configures the high priority cell reselection criteria and 3G RAT has high priority than GSM.<BR>But sometimes, UE is not able to reselect to 3G RAT due to threshold set by NW is too high, Example -49dBm. To overcome, this case where NW has given unrealistic value, Reward the s_non_serving_utran to configurable value so that UE can reselect to 3G RAT faster and enhance user experience.<BR>Configurable value to reward s_non_serving_utran is defined in custom_gas_config.c, Parameter - gas_custom_umts_rscp_reward_threshold<BR>If this SBP is enabled then UE is not following the NW configuration thus it is not in accordance with 3GPP. So by default this SBP value is FALSE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Relax 3GPP criteria during 2G to 3G high priority cell reselection so that UE can move faster to 3G<BR>0:Follow 3GPP criteria for 2G to 3G high priority cell reselection,,,__PREFER_HIGH_PRIO_3G_IN_23G_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6158,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_PREFER_SEARCH_3G,modem_sbp_config[6].SBP_PREFER_SEARCH_3G,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis SBP is to prefer 3G for RPLMN search, and it only affects first power-on search.bit 0:0:Disabled. Not prefer search 3Gbit 1:1:Enabled. Prefer search 3G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6159,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_PREFER_SEARCH_4G,modem_sbp_config[6].SBP_PREFER_SEARCH_4G,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThis SBP is to prefer 4G for RPLMN search, and it only affects first power-on search.bit 0:0:Disabled. Not prefer search 4Gbit 1:1:Enabled. Prefer search 4G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6160,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_PREF_4G_IN_HOME_AFTER_FACTORY_RESET,modem_sbp_config[64].SBP_PREF_4G_IN_HOME_AFTER_FACTORY_RESET,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePerform LTE search when detecting home country PLMN in 2/3/4G after factory resetbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6161,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_PRIORITIZE_HPLMN_IN_SHARED_NETWORK,modem_sbp_config[75].SBP_PRIORITIZE_HPLMN_IN_SHARED_NETWORK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSelect HPLMN/EHPLMN rather than SPLMN/RPLMN in shared network.bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6162,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_PRIORITIZE_NVRAM_EPSLOCI_WHEN_RPLMN_RAT_LTE,modem_sbp_config[95].SBP_PRIORITIZE_NVRAM_EPSLOCI_WHEN_RPLMN_RAT_LTE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePrioritize NVRAM EPSLOCI for obtaining RPLMN when RPLMN RAT is LTE.bit 0:0:Does not prioritize NVRAM EPSLOCIbit 1:1:Prioritize NVRAM EPSLOCI when RPLMN RAT is LTE",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6136,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_OPTIMIZATION_FOR_DRX_CYCLE_COEF_CHANGE,modem_sbp_config[100].SBP_OPTIMIZATION_FOR_DRX_CYCLE_COEF_CHANGE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,MD Config,Modem - Customer Requirement,,,"1. The changes are guarded under SBP_OPTIMIZATION_FOR_DRX_CYCLE_COEF_CHANGE and by default this SBP is OFF. <BR>To set this SBP, please enable the compilation option __OPTIMIZATION_FOR_DRXCYCLELENGTH_CHANGE__ in makefile<BR>Currently the changes are for China PLMN 46001, if this change needs to be extended for more PLMNs, the respective <BR>PLMNs can be added in custom_rrc_config.c file under CUSTOM_DRX_CYCLE_LENGTH_CHANGE_FOR_PLMN_LIST.<BR>2. Suppose CS alone is attached. <BR>3. Suppose SBP is off.<BR>4. Provide different value to CS Domain DRXCycleLength and PS domain DRXCycleLength in SIB1. <BR>5. If CS Domain DRXCycleLength is more than PS domain DRXCycleLength, then UE would configure CS Domain DRXCycleLength and N/W won't be in sync with UE and some paging might be missed.<BR>5. Suppose SBP is on.<BR>6. Repeat step 4.<BR>7. If CS Domain DRXCycleLength is more than PS domain DRXCycleLength, then UE would configure minimum of CS Domain DRXCycleLength and PS Domain DRXCycleLength i.e. UE would configure PS Domain DRXCycleLength and N/W would be in sync with UE.",Untested,,,,
+6137,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_ORANGE_HPPLMN_DEFAULT_TIMER,modem_sbp_config[24].SBP_ORANGE_HPPLMN_DEFAULT_TIMER,OTA and OTA BY OP,no,no,no,yes,Set the default value of higher priority PLMN search timer to 18-minute.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __ORANGE_HPPLMN_DEFAULT_TIMER__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6138,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_ORANGE_H_PLUS,modem_sbp_config[3].SBP_ORANGE_H_PLUS,OTA and OTA BY OP,no,no,no,yes,"According to MT5.4 HSDPA,HSUPA,HSPA+ in Orange Group Device Requirement: In idle mode, the coverage icon shall display the same symbols as in connected mode depending on the last cells max capabilities information available.<BR>The best cell capabilities found shall be displayed. For eg if one bearer configuration used Dual Cell allocation, H+ icon shall be displayed even if another configuration used Single Cell allocation.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is turned ON by __ORANGE_H_PLUS__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6139,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_PAGING_MONITOR_TIMEOUT_TO_GEOSCAN,modem_sbp_config[53].SBP_PAGING_MONITOR_TIMEOUT_TO_GEOSCAN,Not Support,no,no,no,yes,"This SBP describes when Sprint device 1x paging timeout, force to do a GEO scan.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6140,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_PAM_CAUSE65_SUPPORT,modem_sbp_config[13].SBP_PAM_CAUSE65_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"This SBP is to meet the Release 11 of 3GPP spec TS 24.301 and TS 24.008. If SBP_PAM_CAUSE65_SUPPORT is enabled, PAM will reject the PDP context activation / PDN connectivity request when the number of active PDP contexts / EPS bearers has reached the maximum number of simultaneously active PDP contexts / EPS bearers for the UE. <BR>If SBP_PAM_CAUSE65_SUPPORT is disabled, PAM will not check the activation with the requirement of cause #65",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6141,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_PAM_OP08_SELECT_EMERGENCY_PDN_TYPE,modem_sbp_config[57].SBP_PAM_OP08_SELECT_EMERGENCY_PDN_TYPE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6142,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_PAM_OP147_BACKOFF_TIMER_DEFAULT_VALUE,modem_sbp_config[60].SBP_PAM_OP147_BACKOFF_TIMER_DEFAULT_VALUE,OTA and OTA BY OP,no,no,no,yes,"The SBP controls whether to apply the 4-hour timer length for the back-off timer when the UE receives the PDN CONNECTIVITY REJECT with cause #27 (Missing or Unknown APN) and without the back-off timer IE.<BR>If the SBP is on, the UE will start the back-off timer with 4-hour timer length when receiving ESM cause #27 in the PDN CONNECTIVITY REJECT where NW does not include the back-off timer IE.<BR>If the SBP is off, the UE will follow the back-off mechanism as specified in TS24.301.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6143,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[74].SBP_PERFORM_COMBINED_SEARCH_DURING_CSFB,modem_sbp_config[74].SBP_PERFORM_COMBINED_SEARCH_DURING_CSFB,OTA and OTA BY OP,no,no,no,no,Optimization is to perform stored and redirected frequency search during CSFB,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,"To enable this feature, compile option __PERFORM_COMBINED_SEARCH_DURING_CSFB__ must be defined",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6144,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_PERMANENT_AUTO_SEL_MODE,modem_sbp_config[0].SBP_PERMANENT_AUTO_SEL_MODE,OTA,no,no,no,yes,This feature is to force modem in automatic network selection mode even after a manual selection. It's originally required by H3G to keep a user being camped on the home network (HPLMN) as much as possible even after a manual selection of other operators (VPLMN).,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,"After manual selection an unavailable PLMN, UE can still perform auto selection for a while",Pass,,,,
+6145,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_PIB_SYNC_TO_PLMN_LIST_WITH_DIFF_REMOVAL,modem_sbp_config[38].SBP_PIB_SYNC_TO_PLMN_LIST_WITH_DIFF_REMOVAL,OTA and OTA BY OP,no,no,no,yes,"The 3GPP RISE work item has extended the scope of Back-off timer to Equivalent PLMNs (EPLMNs) in Release 13 of both the specifications TS24.301 and TS24.008. When starting a back-off timer (against the combination of APN and current Registered PLMN), UE determines whether to also block the current EPLMN list by following the EPLMNC flag of the Re-attempt indicator in SM/ESM reject message. <BR>This SBP controls whether the blocked EPLMN list remains intact during the running period of the back-off timer. If enabled, a blocked EPLMN can be removed from the back-off timer once it is no longer in the updated EPLMN list as broadcast from the network.<BR>This raises possibility that UE successfully access the network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6146,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_PINGPONG_AVOIDANCE_ENH,modem_sbp_config[82].SBP_PINGPONG_AVOIDANCE_ENH,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE will record the pingpong info into history table when reselection pingpong is detected. Before the protected timer of history table expired, it keeps preventing UE from reselection pingpong between cells of the history table.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"This feature is controlled by __PINGPONG_AVOIDANCE_ENH__ in Gen93, __PINGPONG_AVOIDANCE_ENH_DISABLED__ in Gen95/Gen97",MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (minutes) <BR>[Init] <BR>[Test Step] <BR>[Expected Result],Pass,,,,
+6147,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_PLMNLIST_ENHANCE_WHEN_NO_IMS_PDN,modem_sbp_config[67].SBP_PLMNLIST_ENHANCE_WHEN_NO_IMS_PDN,OTA and OTA BY OP,no,no,no,yes,"To reduce the delay of PLMN LIST in connected mode, MTK provide a solution to enhance the PLMN LIST when there is no IMS PDN existed. <BR>If there is no IMS PDN existed(no IMS related service is required), UE will local release the connection to let PLMN LIST can be performed.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Enhance the PLMN list when there is no IMS PDN.<BR>0:Disable. Do not enhance the PLMN list when there is no IMS PDN.,,,User could use compile option __ENABLE_PLMNLIST_ENHANCE_WHEN_NO_IMS_PDN__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6148,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_PLMNLIST_IN_CONNECTED_MODE,modem_sbp_config[28].SBP_PLMNLIST_IN_CONNECTED_MODE,OTA and OTA BY OP,no,no,no,yes,"If UE camps on LTE cell and stays in connected mode, UE is not allowed to perform PLMN LIST. To loose this limitation, MTK provide another solution. If this SBP is enabled and user want to pefrom PLMN LIST when UE is in LTE connected mode, EMM will start a shorter timer. When this timer expiry, EMM will release the connection to let PLMN LIST to be performed if there is no IMS/CS CALL ongoing.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Release the connection to do PLMN LIST.<BR>0:Disable. Do PLMN LIST until connection released.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6149,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[69].SBP_PLMN_LIST_IGNORE_PS_PAGING_WHEN_IMS_DEREG,modem_sbp_config[69].SBP_PLMN_LIST_IGNORE_PS_PAGING_WHEN_IMS_DEREG,OTA and OTA BY OP,no,no,no,yes,"Ignore PS paging to speed up PLMN LIST when IMS is not registered. UE may be unable to receive SMS when PLMN list is ongoing. However, NW would resend SMS indication later.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Ignore PS paging to speed up PLMN LIST when IMS is not registered.<BR>0:Disable. Don't ignore PS paging to speed up PLMN LIST when IMS is not registered.,,,User could use compile option __DISABLE_PLMN_LIST_IGNORE_PS_PAGING_WHEN_IMS_DEREG__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6150,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_PLMN_LIST_IN_VIRTUAL_MODE,modem_sbp_config[30].SBP_PLMN_LIST_IN_VIRTUAL_MODE,Not Support,no,no,no,yes,"Originally in virtual mode, it is not allowed to do PLMN list. With enhancement of lower layer, this SBP is set to control the functionality that PLMN list allowance in virtual mode.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __ENABLE_PLMN_LIST_IN_VIRTUAL_MODE__.,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6151,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_PLMN_LIST_WITHOUT_ABORT_DATA_TRANSFER,modem_sbp_config[42].SBP_PLMN_LIST_WITHOUT_ABORT_DATA_TRANSFER,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, L4 will block PLMN List (i.e. AT+COPS=?) when data transfer is ongoing and below conditions are matched: <BR>- rrc_state is either UMTS_RRC_CELL_FACH or UMTS_RRC_CELL_DCH<BR>- errc_state is either ERRC_CONNECTED or ERRC_CONN_IRSUS",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,N/A,,,,,"When data is ongoing, AT+COPS=? (PLMN List) cannot be performed",Pass,,,,
+6152,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_PLMN_SEARCH_ABORT_SUPPORT,modem_sbp_config[11].SBP_PLMN_SEARCH_ABORT_SUPPORT,Not Support,no,no,no,yes,"Depends on band configuration and network environment, 4G full band search and 3G full band search may take more than 1 minute. When power on UE in 2G only environment, UE will takes a long time to search 4G or 3G such that UE camps on 2G NW slowly. Besides SFR also requires UE to camp on network within 30s. If PLMN search abort is enabled, UE will abort plmn search 3G/4G after search abort timer expiry. Before timer expiry, 3G/4G AS will search recently stored 3G/4G band first. After timer expiry, if no plmn is found, we assume there may be no available PLMN to register, UE will directly search next rat. Not full band searched rat will be searched again after first round search. <BR>The following is the example: Ex:<BR>- If plmn search abort is disabled, UE search 4G 60s -> not found -> search 3G 30s -> not found -> search 2G 5s -> found and registered. Total 95s to get normal service.<BR>- If plmn search abort is enabled, UE search 4G 12s -> not found and aborted -> search 3G 9s -> not found and aborted -> search 2G 5s -> found and registered. Total 26s to get normal service.<BR>Abort timer is configurable by SBP_PLMN_SEARCH_ABORT_3G_TIMER_PERIOD and SBP_PLMN_SEARCH_ABORT_4G_TIMER_PERIOD",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6153,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_POPLMN_EQUAL_PRIORITY_IN_FAST_ROAMING,modem_sbp_config[68].SBP_POPLMN_EQUAL_PRIORITY_IN_FAST_ROAMING,OTA and OTA BY OP,no,no,no,yes,"If the SBP is off, the priority of POPLMN is according to their orders. Only the highest priority VPLMN can trigger fast roaming. If the SBP is on, POPLMN are treated as equal priority. If one of POPLMN is highest priority VPLMN, all the POPLMNs are highest priority VPLMNs.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __POPLMN_EQUAL_PRIORITY_IN_FAST_ROAMING__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6154,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[65].SBP_POWER_ON_STORED_LIST_SEARCH,modem_sbp_config[65].SBP_POWER_ON_STORED_LIST_SEARCH,OTA and OTA BY OP,no,no,no,yes,"In some regions of China, the network has not been deployed completely and could not provide LTE services. If UE does fullband search in these areas, it would take long time to try to camp on available LTE network and get rejected, until UE has deemed that LTE service is totally unavailable. <BR>When this SBP is enabled, UE would only perform LTE stored list search for the 1st try after power-on, thus UE would not stuck on the unavailable LTE network for too long, and be able to search C2K for services.<BR>IMPORTANT NOTICE: When this SBP is enabled, UE would not scan all LTE bands and frequency during stored list search, only search the ones UE records before. So UE may not be able to camp on LTE first in heterogeneous network environment, a.k.a. UE may camp on C2K first even in LTE network coverage.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~8,,,"This SBP is only valid under CT operatorif compile option __POWER_ON_STORED_LIST_SEARCH__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+6155,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_PREDICT_SEARCH_MECHANISM,modem_sbp_config[97].SBP_PREDICT_SEARCH_MECHANISM,OTA and OTA BY OP,no,no,no,yes,NWSEL will set a bit to ask xRRC to search extra ARFCNs where UE has higher probability to find a cell.<BR>Currently on apply on ERRC and NRRC for power-on stored R/H phase and full band search phase<BR>The total search time for sotred + predict search has to be guarded. So NWSEL starts a guard timer to preempt ongoing predict search.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6156,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_PREFER_3G_IN_23G_MODE,modem_sbp_config[58].SBP_PREFER_3G_IN_23G_MODE,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, UE will prefer to stay on 3G when operating in WG mode.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP item is controlled (enabled) by the compile flag __PREFER_3G_IN_23G_MODE__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6157,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_PREFER_HIGH_PRIO_3G_IN_23G_MODE,modem_sbp_config[67].SBP_PREFER_HIGH_PRIO_3G_IN_23G_MODE,OTA and OTA BY OP,no,no,no,yes,"Sometimes in dual mode GSM/WCDMA, NW configures the high priority cell reselection criteria and 3G RAT has high priority than GSM.<BR>But sometimes, UE is not able to reselect to 3G RAT due to threshold set by NW is too high, Example -49dBm. To overcome, this case where NW has given unrealistic value, Reward the s_non_serving_utran to configurable value so that UE can reselect to 3G RAT faster and enhance user experience.<BR>Configurable value to reward s_non_serving_utran is defined in custom_gas_config.c, Parameter - gas_custom_umts_rscp_reward_threshold<BR>If this SBP is enabled then UE is not following the NW configuration thus it is not in accordance with 3GPP. So by default this SBP value is FALSE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Relax 3GPP criteria during 2G to 3G high priority cell reselection so that UE can move faster to 3G<BR>0:Follow 3GPP criteria for 2G to 3G high priority cell reselection,,,"Default value depends on compilation flag, __PREFER_HIGH_PRIO_3G_IN_23G_MODE__, if this flag is defined, then default value 1 otherwise 0",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6158,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_PREFER_SEARCH_3G,modem_sbp_config[6].SBP_PREFER_SEARCH_3G,Not Support,no,no,no,yes,"This SBP is to prefer 3G for RPLMN search, and it only affects first power-on search. The flag would be deleted after registration successfully.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"If SBP_PREFER_SEARCH_4G is turned on simultaneously, the UE should prefer 4G over 3G.",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6159,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_PREFER_SEARCH_4G,modem_sbp_config[6].SBP_PREFER_SEARCH_4G,Not Support,no,no,no,yes,"This SBP is to prefer 4G for RPLMN search, and it only affects first power-on search. The flag would be deleted after registration successfully.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"If SBP_PREFER_SEARCH_3G is turned on simultaneously, the UE should prefer 4G over 3G.",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6160,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_PREF_4G_IN_HOME_AFTER_FACTORY_RESET,modem_sbp_config[64].SBP_PREF_4G_IN_HOME_AFTER_FACTORY_RESET,Not Support,no,no,no,yes,"After factory reset, there may be no much stored frequency information so that UE may not find the LTE cell during stored only search. Therefore, UE may camp on 2/3G at 1st power on after factory reset. If this SBP is turned on, UE will perform LTE fullband search after detecting the home country PLMN in 2/3/4G search after factory reset.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,"if compile option __PREF_4G_IN_HOME_AFTER_FACTORY_RESET__ is defined, the SBP is enabled. This SBP only works when __NWSEL_QUICK_SEARCH_FOR_ROAMING__ is defined.",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6161,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_PRIORITIZE_HPLMN_IN_SHARED_NETWORK,modem_sbp_config[75].SBP_PRIORITIZE_HPLMN_IN_SHARED_NETWORK,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE selects HPLMN before RPLMN in shared network if HPLMN is in EPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6162,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_PRIORITIZE_NVRAM_EPSLOCI_WHEN_RPLMN_RAT_LTE,modem_sbp_config[95].SBP_PRIORITIZE_NVRAM_EPSLOCI_WHEN_RPLMN_RAT_LTE,Not Support,no,no,no,yes,"When SIM is inserted, UE will obtain RPLMN from SIM card EFs. If a SIM does not contain EF_EPSLOCI, the 4G registration information will not be stored in the SIM card.<BR>Instead, the information will be stored in NVRAM. When obtaining RPLMN, UE will check SIM card EFs (EF_EPSLOCI and EF_LOCI) first. If UE cannot obtain RPLMN from the EFs, then UE will obtain RPLMN from NVRAM. If this SBP is turned on and RPLMN RAT is LTE, UE will prioritize the NVRAM EPSLOCI. If RPLMN cannot be obtained from EF_EPSLOCI, NVRAM EPSLOCI will be considered before EF_LOCI. The SBP will not take effect under test SIM or test mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,This feature is controlled by __PRIORITIZE_NVRAM_EPSLOCI_WHEN_RPLMN_RAT_LTE__,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
6163,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_PRL_ENHANCE_FOR_INT_ROAM,modem_sbp_config[51].SBP_PRL_ENHANCE_FOR_INT_ROAM,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureperational sid validate for international roamingbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6164,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_PRORITIZE_PS_SIGNALING_OVER_PLMN_SEARCH,modem_sbp_config[58].SBP_PRORITIZE_PS_SIGNALING_OVER_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Start PLMN Search after ongoing PS signaling procedure is complete<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Disable<BR>0x01:Enable,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6165,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_PS_DATA_OFF_DEFAULT_MOBILE_DATA_VALUE_BEFORE_ECNCFG,modem_sbp_config[81].SBP_PS_DATA_OFF_DEFAULT_MOBILE_DATA_VALUE_BEFORE_ECNCFG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThe default mobile data value for PS DATA OFF before AT+ECNCFG is receivedbit 0:0:Mobile data offbit 1:1:Mobile data on",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:The mobile data is treated as on before AP sends AT+ECNCFG<BR>0:The mobile data is treated as off before AP sends AT+ECNCFG,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6166,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_PS_DATA_OFF_SWITCH,modem_sbp_config[80].SBP_PS_DATA_OFF_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature3GPP PS DATA OFF featurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,Feature could be enabled by enabling compiler option __SBP_PS_DATA_OFF_SWITCH__,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] None<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-6167,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_R11_COMB_BUT_EPS_ABNORMAL_HANDLE,modem_sbp_config[12].SBP_R11_COMB_BUT_EPS_ABNORMAL_HANDLE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply R11 combined attach but EPS abnormal handlingbit 0:0:Turn-off. Not apply R11 combined attach but EPS abnormal handlingbit 1:1:Turn-on. Apply R11 combined attach but EPS abnormal handling",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6168,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_R12_CHECK_SSAC_IN_CONNECTED,modem_sbp_config[31].SBP_R12_CHECK_SSAC_IN_CONNECTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Default enable after UMOLYAbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,__SBP_R12_CHECK_SSAC_IN_CONNECTED__ : 0x01<BR>DEFAULT_VALUE : 0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1 enable<BR>0 disable,,,,LTE Protocol (R13 Baseline),4G,,,Test in machine (Y/N) Y<BR> Test Time (minutes) 5<BR> [Init] <BR>Set SBP<BR> [Test Step] <BR>Use SSAC setup connection<BR> [Expected Result]<BR>RRC connection setup successfully,Pass,,,,
-6169,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_R12_SELECT_23G_AFTER_ABNORMAL,modem_sbp_config[42].SBP_R12_SELECT_23G_AFTER_ABNORMAL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSelect 23G after ATTACH/TAU abnormalbit 0:0:Disabled. Do not select 23Gbit 1:1:Enabled. Select 23G after ATTACH/TAU abnormal",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6170,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_R13_DOS_ENHANCE,modem_sbp_config[36].SBP_R13_DOS_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature3GPP Rel-13 Denial-of-Service related enhancementbit 0:0:Disabled. R13 DoS enhancement is NOT applied.bit 1:1:Enabled. R13 DoS enhancement is applied.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled. R13 DoS enhancement is NOT applied.<BR>1:Enabled. R13 DoS enhancement is applied.,,,__DISABLE_R13_DOS_ENHANCE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6171,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_R13_DOS_PLMN_SPECIFIC_ATTEMPT_COUNTER,modem_sbp_config[71].SBP_R13_DOS_PLMN_SPECIFIC_ATTEMPT_COUNTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport PLMN-specific attempt counter and PLMN-specific PS-attempt counter as defined in TS24.301 5.3.7bbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6172,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_R13_NO_OTHER_2D1U_CA,modem_sbp_config[85].SBP_R13_NO_OTHER_2D1U_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature R13 No Other 2D1U CA to exclude other 2D1U CA combinations in UE Cap Info bit 0:Not Enabled,bit 1:Enabled",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> UE will not include other 2D1U according to 36.331 R13<BR>0:disable ==> UE will include other 2D1U according to 36.331 R12,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: <BR> Value changes in MCF dump<BR> check the reported CA capability after camping on LTE network,Pass,,,,
-6173,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_R14_EUTRAN_SHARING_ENH,modem_sbp_config[85].SBP_R14_EUTRAN_SHARING_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureR14 Enhanced EUTRAN sharingbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,"0x00, however, VMOLY is Rel-15 base and the default value should be set to 0x01 for VMOLY",NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, support R14 EUTRAN sharing.<BR>0:Disable, not support R14 EUTRAN sharing",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR> Test Time (minutes) 20mins<BR> [Init] 1 LTE cell with R14 EUTRAN Sharing configured in SIB1<BR> [Test Step] <BR>1. Set SBP_R14_EUTRAN_SHARING_ENH to TRUE(1)<BR>2. Perform manual PLMN LIST and check if each PLMN-ID/TAC/Cell_ID in SIB1 is correct.<BR> [Expected Result],Pass,,,,
-6174,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_RACH_FAIL_ENHANCEMENT,modem_sbp_config[60].SBP_RACH_FAIL_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureOptimization for the cell with RACH failedbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__RACH_FAIL_ENHANCEMENT__,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
-6175,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_RAC_CAUSE18_NOT_CHANGE_UEMODE_BY_PLMN,modem_sbp_config[54].SBP_RAC_CAUSE18_NOT_CHANGE_UEMODE_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot change UEMODE when enter cause18 plmnbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6176,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_RAC_CHANGE_USAGE_SETTING_BY_SIM,modem_sbp_config[23].SBP_RAC_CHANGE_USAGE_SETTING_BY_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChange UE usage based on SIMbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6177,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_BY_ROAMING,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_BY_ROAMING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSwitch the VDP for EUTRAN when Home/Roamingbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,DEFAULT_VALUE : 0x00<BR>__RAC_CHANGE_VDP_BY_ROAMING__ : 0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6178,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_RAC_CHANGE_VDP_IMS_CONFIG_BY_ROAMING,modem_sbp_config[29].SBP_RAC_CHANGE_VDP_IMS_CONFIG_BY_ROAMING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChange VDP setting and IMS capability when roamingbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6179,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_SRVCC_BY_SIM,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_SRVCC_BY_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDynamically configure VDP and SRVCC parameters by IMSIbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6180,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_RAC_CHANGE_VDP_WHEN_IMS_ONOFF,modem_sbp_config[15].SBP_RAC_CHANGE_VDP_WHEN_IMS_ONOFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChange Voice Domain Preference when IMS setting is switched to on or offbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6181,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_RAC_CLEAR_CAUSE18_WHEN_DETACH,modem_sbp_config[36].SBP_RAC_CLEAR_CAUSE18_WHEN_DETACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE mode will not change to EPS only when UE recevied attach reject or detach with cause#18bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6182,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_RAC_NW_LOSS_OPTIMIZATION,modem_sbp_config[29].SBP_RAC_NW_LOSS_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUI optimiztion when NW loss suddenlybit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6183,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_RAC_UEMODE_WITHOUT_CONSIDER_VDP,modem_sbp_config[21].SBP_RAC_UEMODE_WITHOUT_CONSIDER_VDP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE mode operation regardless of VDP settingbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6184,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_RAU_DELAY_FOR_CSFB,modem_sbp_config[41].SBP_RAU_DELAY_FOR_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo enable RAU Delay for CSFBbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If SBP is disabled, PS procdure is ongoing<BR>0x1:If this SBP is enabled, the PS procedure is delay during CSFB until CS call is established",,,__MM_RAU_DELAY_FOR_CSFB__,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] <BR>Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated<BR>[Test Step] <BR>Perform 23G CSFB<BR>[Expected Result] <BR>UE perform CSFB in few seconds without any delay",Pass,,,,
-6185,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_REATTACH_AFTER_MT_DETACH_ABNORMAL_B,modem_sbp_config[82].SBP_REATTACH_AFTER_MT_DETACH_ABNORMAL_B,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConvert MT Detach Request abnormal case b to reattachbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Transfer NW detach abnormal case b to reattach.<BR>0:Not transfer NW detach abnormal case b to reattach.,,,__DISABLE_REATTACH_AFTER_MT_DETACH_ABNORMAL_B__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6164,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_PRORITIZE_PS_SIGNALING_OVER_PLMN_SEARCH,modem_sbp_config[58].SBP_PRORITIZE_PS_SIGNALING_OVER_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, when PLMN Search request was received when any PS signaling is ongoing, UE shall start PLMN Search after ongoing PS signaling procedure is complete",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Disable<BR>0x01:Enable,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6165,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[81].SBP_PS_DATA_OFF_DEFAULT_MOBILE_DATA_VALUE_BEFORE_ECNCFG,modem_sbp_config[81].SBP_PS_DATA_OFF_DEFAULT_MOBILE_DATA_VALUE_BEFORE_ECNCFG,OTA and OTA BY OP,no,no,no,yes,"When the IA cache is enabled, the AP will not send AT+ECNCFG before the attach procedure occurs. However, the PS DATA OFF UE status needs to be carried in the PCO of PDN Connectivity Request.This SBP is treated as the default mobile data value for the attach and additional PDNs before AP sends AT+ECNCFG. After the AT+ECNCFG is received in MD, if the mobile data value in AT+ECNCFG is different than the value of this SBP, the UE will triggers the bearer modification procedure to inform the network about the new PS DATA OFF UE status for the PDNs that support PS DATA OFF. Note that this SBP is meaningless if SBP_PS_DATA_OFF_SWITCH is off.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:The mobile data is treated as on before AP sends AT+ECNCFG<BR>0:The mobile data is treated as off before AP sends AT+ECNCFG,,,Feature could be enabled by enabling compiler option __SBP_PS_DATA_OFF_DEFAULT_MOBILE_DATA_VALUE_BEFORE_ECNCFG__. Note that this SBP is meaningless if SBP_PS_DATA_OFF_SWITCH is off.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6166,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_PS_DATA_OFF_SWITCH,modem_sbp_config[80].SBP_PS_DATA_OFF_SWITCH,OTA and OTA BY OP,no,no,no,yes,"PS DATA OFF is an R14 feature defined in 3GPP TS 23.401. The main purpose of 3GPP PS Data Off feature is to inform the network that the user has deactivated the data services, in order to avoid excessive roaming charges or for other exemptions to any form of services the operator can offer to the end user in such conditions. When 3GPP PS Data Off is activated, the UE and the network must not send via any PDN connection any IP packet of any service other than 3GPP PS Data off Exempt Services. This SBP is the overall switch of PS DATA OFF feature. If the value is 0, the modules must not run any PS DATA OFF logic, and the UE should behave like the existing MTK phones which don't support PS DATA OFF. If the value is 1, the UE may run the PS DATA OFF logic according to other conditions.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,Feature could be enabled by enabling compiler option __SBP_PS_DATA_OFF_SWITCH__,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] None<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+6167,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_R11_COMB_BUT_EPS_ABNORMAL_HANDLE,modem_sbp_config[12].SBP_R11_COMB_BUT_EPS_ABNORMAL_HANDLE,Not Support,no,no,no,yes,"For combined attach but GPRS only abnormal case, when this SBP is turned on, we should check that attempt counter < 5 instead of just setting attempt counter to 5 and do following handler. This SBP is related to 3GPP TS 24.301 CR 1535.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6168,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_R12_CHECK_SSAC_IN_CONNECTED,modem_sbp_config[31].SBP_R12_CHECK_SSAC_IN_CONNECTED,OTA and OTA BY OP,no,no,no,yes,"Obsolete. Always enabled after UMOLYA. In order to contol MMTEL(voice and video) data burst from UE in ERRC_CONNECTED state, SSAC fuctionality also apply in ERRC_CONNECTED state in R12. UE handles SSAC parameters in ERRC_IDLE and ERRC_CONNECTED states upon MMTEL service is required. This SBP is to enable/disable SSAC in connected feature.",BIT,1,,1,__SBP_R12_CHECK_SSAC_IN_CONNECTED__ : 0x01<BR>DEFAULT_VALUE : 0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1 enable<BR>0 disable,,,The setting of this SBP could be set to "enable" by defining compile option __SBP_R12_CHECK_SSAC_IN_CONNECTED__ in the makefile,LTE Protocol (R13 Baseline),4G,,,Test in machine (Y/N) Y<BR> Test Time (minutes) 5<BR> [Init] <BR>Set SBP<BR> [Test Step] <BR>Use SSAC setup connection<BR> [Expected Result]<BR>RRC connection setup successfully,Pass,,,,
+6169,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_R12_SELECT_23G_AFTER_ABNORMAL,modem_sbp_config[42].SBP_R12_SELECT_23G_AFTER_ABNORMAL,Not Support,no,no,no,yes,"For 24.301 R12 CR1980 and CR2041, add SBP_R12_SELECT_23G_AFTER_ABNORMAL to fulfill the requirement after R12. <BR>If this SBP is enabled, UE would select 23G network after receiving the abnormal condition of ATTACH or TAU procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6170,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_R13_DOS_ENHANCE,modem_sbp_config[36].SBP_R13_DOS_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"LTE network has been widely deployed all over the world, at the mean time malicious network also become more and more common in every country. Malicious network could intentionally send certain NAS reject messages and prevent UE from gaining normal service, to realize the "denial-of-service" attack. 3GPP has make some changes in spec. to solve above problems. The basic ideas are as follow:<BR>- If the UE receives an ATTACH REJECT, TRACKING AREA UPDATE REJECT or SERVICE REJECT message without integrity protection with EMM cause value #3, #6, #7, #8, #11, #12, #13, #14, #15 or #35, UE shall perform different actions rather than orignal behaviors in corresponding paragraphs.<BR>- For the reject causes which UE shall set SIM to invalid, increase a counter instead. Set SIM to invalid when the counter reaches max value.<BR>- For the reject causes which UE shall add PLMN to forbidden PLMN list, add TAI to TAI list instead.<BR>The full changes of related CRs would not be described in this document, customer may refer to TS24.301 CR2292, CR2351, CR2360, CR2792, CR2806 for details. When this SBP is enabled, UE would follow behavior specified in DoS related CRs.<BR>IMPORTANT NOTICE: Note that GCF standard has not updated the test spec. to fit the latest R13 behavior, so we do not enable this feature when test mode is FTA mode(GCF configuration). If customer wishes to run some other machine testcases which involves reject cause handling, UE may not be able to pass the cases with this feature enabled(if legacy behavior from UE is expected).",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled. R13 DoS enhancement is NOT applied.<BR>1:Enabled. R13 DoS enhancement is applied.,,,This SBP is only valid when test mode is NOT set as FTA mode.This SBP is only valid when __DISABLE_R13_DOS_ENHANCE__ compile option does NOT exist.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6171,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_R13_DOS_PLMN_SPECIFIC_ATTEMPT_COUNTER,modem_sbp_config[71].SBP_R13_DOS_PLMN_SPECIFIC_ATTEMPT_COUNTER,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE maintains PLMN-specific attempt counter and PLMN-specific PS-attempt counter as defined in TS24.301 5.3.7b. When UE receives non-integrity reject #11, #14, #35 on a roaming PLMN, UE will increase the corresponding attempt counter. When T3247 expiry and power off, UE will delete the PLMN whose counter is not qual to an implementation specific maximum value.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __R13_DOS_PLMN_SPECIFIC_ATTEMPT_COUNTER__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6172,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_R13_NO_OTHER_2D1U_CA,modem_sbp_config[85].SBP_R13_NO_OTHER_2D1U_CA,OTA and OTA BY OP,no,no,no,yes,"If the UECapabilityEnquiry message includes requestedFrequencyBands and UE supports requestedFrequencyBands, UE shall include all other 2DL+1UL CA band combinations according to 36.331 R12. "include all other 2DL+1UL CA band combinations" is removed from R13 due to LTE_CA_enh_b5C-Core(CR1872).",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> UE will not include other 2D1U according to 36.331 R13<BR>0:disable ==> UE will include other 2D1U according to 36.331 R12,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: <BR> Value changes in MCF dump<BR> check the reported CA capability after camping on LTE network,Pass,,,,
+6173,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_R14_EUTRAN_SHARING_ENH,modem_sbp_config[85].SBP_R14_EUTRAN_SHARING_ENH,OTA and OTA BY OP,no,no,no,yes,R14 Enhanced EUTRAN sharing feature. Allow each sharing PLMN to define their own TAC/CELL_ID,BIT,1,,1,"0x00, however, VMOLY is Rel-15 base and the default value should be set to 0x01 for VMOLY",NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, support R14 EUTRAN sharing.<BR>0:Disable, not support R14 EUTRAN sharing",,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR> Test Time (minutes) 20mins<BR> [Init] 1 LTE cell with R14 EUTRAN Sharing configured in SIB1<BR> [Test Step] <BR>1. Set SBP_R14_EUTRAN_SHARING_ENH to TRUE(1)<BR>2. Perform manual PLMN LIST and check if each PLMN-ID/TAC/Cell_ID in SIB1 is correct.<BR> [Expected Result],Pass,,,,
+6174,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_RACH_FAIL_ENHANCEMENT,modem_sbp_config[60].SBP_RACH_FAIL_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"This SBP is to improve the chance UE to retry on the cell that recently caused UE suffering from continuous RACH fail.<BR>Currently, when RACH failure count reaches customized threshold (threshold is defined in NVRAM_EF_ERRC_PERFORMANCE_PARA_LID.max_kraerr), the cell will be barred for a customized time (NVRAM_EF_ERRC_PERFORMANCE_PARA_LID.trach). <BR>However, if this SBP is turned on, when a cell that used to cause UE suffering from RACH fail has a better signal power, UE will try to camp on that cell again and won't need to wait for timeout.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,The setting of this SBP could be set to "enable" by defining compile option __RACH_FAIL_ENHANCEMENT__ in the makefile,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+6175,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_RAC_CAUSE18_NOT_CHANGE_UEMODE_BY_PLMN,modem_sbp_config[54].SBP_RAC_CAUSE18_NOT_CHANGE_UEMODE_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"According to 3GPP spec. 24.301, UE will change UE mode to EPS only when entering cause#18 PLMN. At that time, UE may receive attach reject or detach with EMM cause#18 (CS domain not available). Once IMS registration was unregistered, UE should disable EUTRAN and try to search 2/3G for protecting CS voice capability.<BR>This SBP will provide user a method UE can still use combined attach even in PS domain only network. Thus, UE can stay on LTE even IMS not registered.<BR>Customer can construct one PLMN based table with s_custom_cause18_table. When UE enter into cause#18 PLMN found in the table, UE won't change UE mode to EPS only if this SBP was enabled. Otherwise, UE disable EUTRAN immediately if IMS not registered.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __RAC_CAUSE18_NOT_CHANGE_UEMODE_BY_PLMN__ in makefile.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6176,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_RAC_CHANGE_USAGE_SETTING_BY_SIM,modem_sbp_config[23].SBP_RAC_CHANGE_USAGE_SETTING_BY_SIM,OTA and OTA BY OP,no,no,no,yes,"This SBP was used for operator requirement. Once the SBP enabled, UE usage will be voice centric when inserting softbank SIM card. And UE usage will be data centric when inserting non softband SIM card.<BR>When the SBP was disabled, UE usage setting will be depenedent on project configuration.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,The feature can be enabled by adding __RAC_CHANGE_USAGE_SETTING_BY_SIM__ in makefile.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6177,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_BY_ROAMING,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_BY_ROAMING,OTA and OTA BY OP,no,no,no,yes,"Some customer would like to change VDP setting dynamically based when entering into roaming network. For example, VDP may be changed to CS voice only under roaming network. In other words, VDP may be changed to IMS PS voice prefer under home network.<BR>This SBP will provide user a method UE can dynamically change VDP when entering into roaming network.<BR>Customer can construct one PLMN based table with desired VDP setting in s_custom_roaming_vdp_table. If MCC/MNC of SIM card could be found in this table, UE can dynamically change VDP setting defined in this table when entering roaming network. Otherwise, UE will use default setting for VDP whether for roaming or home network.",BIT,1,,1,DEFAULT_VALUE : 0x00<BR>__RAC_CHANGE_VDP_BY_ROAMING__ : 0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __RAC_CHANGE_VDP_BY_ROAMING__ in makefile.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6178,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_RAC_CHANGE_VDP_IMS_CONFIG_BY_ROAMING,modem_sbp_config[29].SBP_RAC_CHANGE_VDP_IMS_CONFIG_BY_ROAMING,OTA and OTA BY OP,no,no,no,yes,"This SBP was used for operator requirement. Once the SBP enabled, IMS capability of UE will be not support and VDP will be CS voice only under roaming network. When UE enter into home PLMN network, IMS capability will be support and VDP will be IMS Voice Prefer.<BR>If disabling this SBP, IMS capability and VDP will not be affected by home or roaming network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __RAC_CHANGE_VDP_IMS_CONFIG_BY_ROAMING__ in makefile.,,,,,,Pass,,,,
+6179,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_SRVCC_BY_SIM,modem_sbp_config[54].SBP_RAC_CHANGE_VDP_SRVCC_BY_SIM,OTA and OTA BY OP,no,no,no,yes,"Some customer would like to change VDP and SRVCC setting dynamically based on different SIM cards. For example, VDP may be changed to IMS PS voice prefer and SRVCC support once inserting VoLTE support SIM card. In other words, VDP may be changed to CS voice only and SRVCC not support when inserting VoLTE not support SIM card.<BR>This SBP will provide user a method UE can dynamically change VDP and SRVCC setting based on different SIM cards.<BR>Customer can construct one PLMN based table with desired VDP setting in s_custom_vdp_table. If MCC/MNC of SIM card could be found in this table, UE can dynamically change VDP and SRVCC setting defined in this table. Otherwise, UE will use default setting for VDP and SRVCC even for different SIM cards.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __RAC_CHANGE_VDP_SRVCC_BY_SIM__ in makefile.,,,,,,Pass,,,,
+6180,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_RAC_CHANGE_VDP_WHEN_IMS_ONOFF,modem_sbp_config[15].SBP_RAC_CHANGE_VDP_WHEN_IMS_ONOFF,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to fulfill the requirement from some customers and operators as following.<BR>- When the enable/disable setting of IMS is disabled, which also means that UE could not use VoLTE service, the voice domain preference(VDP) shall be set to "CS Voice only"<BR>- When the enable/disable setting of IMS is enabled, which also means that UE could use VoLTE service, the voice domain preference(VDP) shall be set to "PS Voice Preferred, CS Voice as secondary"<BR>By default, this SBP is disabled and the default setting of VDP is "PS Voice Preferred, CS Voice as secondary" which could be configured in the NVRAM file NVRAM_EF_LTE_PREFERENCE_LID.<BR>When this SBP is enabled, if modem is asked from upper layer (ex. AP) to change the setting of IMS, the VDP value would be set as mentioned above. On the other hand, MD will triggered TAU to update VDP to the network if it has registered to the network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,"The SBP is switchable through NVRAM configuration.But, if user want to enable it by default, please define __RAC_CHANGE_VDP_WHEN_IMS_ONOFF__ in the makefile.",MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6181,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[36].SBP_RAC_CLEAR_CAUSE18_WHEN_DETACH,modem_sbp_config[36].SBP_RAC_CLEAR_CAUSE18_WHEN_DETACH,OTA and OTA BY OP,no,no,no,yes,"According to 3GPP 24.301, UE should change UE mode as EPS only when UE recevied attach reject or detach with cause#18.This SBP was implemented for operator requirement but violate definition as specficiation 24.301 section 5.6.1.5. Once enable this SBP, UE mode will be still CS/PS mode 1 or CS/PS mode 2 when receiving cause#18.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by adding __RAC_CLEAR_CAUSE18_WHEN_DETACH__ in makefile.,,,,,,Pass,,,,
+6182,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_RAC_NW_LOSS_OPTIMIZATION,modem_sbp_config[29].SBP_RAC_NW_LOSS_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"This SBP was used for UI optimization when NW loss suddenly. If UE suddenly drop to limited service from in service, UE won't report CREG, CEREG and CGREG to AP once this SBP was enabled. Till UE tried to search again, UE reported in limited service. Thus, UI will still show the icon with registered state. This feature can improve user experience for registration status<BR>If disabling this SBP, UE will report limited service once suddenly NW loss.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,,,,,,Pass,,,,
+6183,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_RAC_UEMODE_WITHOUT_CONSIDER_VDP,modem_sbp_config[21].SBP_RAC_UEMODE_WITHOUT_CONSIDER_VDP,OTA and OTA BY OP,no,no,no,yes,"According to 3gpp 24.301 section 4.3.2.3. UE mode operation should be refered by change of voice domain preference. Once the SBP enabled, UE mode operation will no longer refer to VDP setting. And UE mode will be CS/PS mode1 or CS/PS mode2.<BR>Otherwise, UE mode will refer to change of VDP described in 4.3.2.3 .",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This SBP is contorlled by __RAC_UEMODE_WITHOUT_CONSIDER_VDP__ compilation flag,,,,,,Pass,,,,
+6184,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_RAU_DELAY_FOR_CSFB,modem_sbp_config[41].SBP_RAU_DELAY_FOR_CSFB,OTA and OTA BY OP,no,no,no,yes,"In the SKT Korea Network, simultaneous CS/PS handling on the Network side generally causes CSFB call setup delays. This SKT Requirement is to delay PS Procedure (RAU) during CSFB Until CS Call is established, or until timer is expired.<BR>The default timer value is 1.5 seconds.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If SBP is disabled, PS procdure is ongoing<BR>0x1:If this SBP is enabled, the PS procedure is delay during CSFB until CS call is established",,,This feature is originally controlled by __MM_RAU_DELAY_FOR_CSFB__.,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] <BR>Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated<BR>[Test Step] <BR>Perform 23G CSFB<BR>[Expected Result] <BR>UE perform CSFB in few seconds without any delay",Pass,,,,
+6185,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[82].SBP_REATTACH_AFTER_MT_DETACH_ABNORMAL_B,modem_sbp_config[82].SBP_REATTACH_AFTER_MT_DETACH_ABNORMAL_B,OTA and OTA BY OP,no,no,no,yes,"In China Henan, network will give network detach (re-attach not required with cause #40). This cause DUT in a infinite loop when new PDP activate in 23G and reselect to 4G. After receive such detach request, our current design is to try 23G. However, it will encounter same network behavior after registered in 23G and reselect to 4G. Hence, this workaround is proposed, and it is verified in the issue place that infinite loop will end.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Transfer NW detach abnormal case b to reattach.<BR>0:Not transfer NW detach abnormal case b to reattach.,,,This feature can be disabled by __DISABLE_REATTACH_AFTER_MT_DETACH_ABNORMAL_B__ flag,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
6186,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[86].SBP_RECOVERY_ENHANCEMENT,modem_sbp_config[86].SBP_RECOVERY_ENHANCEMENT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE use sniffer for recoverybit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6187,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_RECOVERY_SNIFFER_PREFER_LTE,modem_sbp_config[68].SBP_RECOVERY_SNIFFER_PREFER_LTE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePrefer LTE during recovery sniffer after OOSbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6188,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_REDUCE_T3311_TIMEOUT_FOR_RAU,modem_sbp_config[103].SBP_REDUCE_T3311_TIMEOUT_FOR_RAU,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureShorten the T3311 timeout value for RAUbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:If enable, Use T3311 timer value of 5 secs when RLC ACK fails with cause GPRS Resume discard<BR>0x00:Use t3311 timer for rau as per spec :",,,__REDUCE_T3311_TIMEOUT_FOR_RAU__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 2G <BR>-> Trigger PS data cnf with cause DC_Status_GAS_RLC_GPRS_Resume_Discard<BR>-> T3311 should run with reduced time 5 sec<BR>[Expected Result]<BR>T3311 should run with reduced time 5 sec,Untested,,,,
-6189,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_REG_HISTORY_FOR_PLMN_SELECTION,modem_sbp_config[20].SBP_REG_HISTORY_FOR_PLMN_SELECTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUse registration history for PLMN selection optimization.bit 0:0:Turn-off. Not use registration historybit 1:1:Turn-on. Use registration history",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6190,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_REJ_13_SEARCH_NEXT_BEFORE_OTHER_LA_OR_TA,modem_sbp_config[63].SBP_REJ_13_SEARCH_NEXT_BEFORE_OTHER_LA_OR_TA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo search other PLMNs after UE receives reject cause #13bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6191,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_REL10_LTE_PS_ACC_CONGESTION,modem_sbp_config[33].SBP_REL10_LTE_PS_ACC_CONGESTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDecide behavior of EPS only result with cause #22bit 0:0:Disable. Follow R11 behavior for eps only result with cause #22bit 1:1:Enabled. Follow R9/R10 behavior for eps only result with cause #22",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Follow R9/R10 behavior for eps only result with cause #22.<BR>0:Disable. Follow R11 behavior for eps only result with cause #22.,,,__REL10_LTE_PS_ACC_CONGESTION__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6192,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_RELEASE_PS_CONN_FOR_EUTRAN_UPDATE,modem_sbp_config[8].SBP_RELEASE_PS_CONN_FOR_EUTRAN_UPDATE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRelease PS connection for EUTRAN updatebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:NAS shall not release PMM connection when EUTRAN capablity is changes<BR>1:NAS shall release PMM connection when EUTRAN capability is changed.,,,__RELEASE_PS_CONN_FOR_EUTRAN_UPDATE__,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6193,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRelease RRC connection locally after first expiry of T3380bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x1:If enable, After 5 expiry of T3380 PDP activation timer, MS shall trigger SCRI",,,__RELEASE_RRC_CONNECTION _LOCALLY_AFTER_T3380_FIFTH_EXPIRY__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G <BR>-> Trigger connection release from SM<BR>-> If N/W does not release the RRC connection then MM will send the force connection release req to RRCE to release the RRC connection<BR>[Expected Result]<BR>MM will send the force connection release req to RRCE to release the RRC connection,Pass,,,,
-6194,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_REL_12_EPLMN_LIST_HANDLING,modem_sbp_config[29].SBP_REL_12_EPLMN_LIST_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRel-12 conformance not to delete equivalent PLMN list for #9,#10 and #40 RAU/TAU procedure.bit 0:0:Disabled. Delete EPLMN list when receiving #9, #10 or #40bit 1:1:Enabled. Do not delete EPLMN list when receiving #9, #10 or #40",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,modem_sbp_config[61].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureForce PS release during PLMN list Req on PDP Deactivatebit 0:0:During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivatedbit 1:1:During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated<BR>0:During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivated",,,__SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : N<BR> Test Time (minutes) :NA<BR> [Init] <BR> [Test Step]<BR> 1. Perform PDP deactivation <BR> 2. Network not send RRC connection release <BR> [Expected Result]<BR> 3. UE send SCRI after 10 secs,Pass,,,,
-6196,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_REMOVE_BLACK_CELLS_FROM_REDIR_LIST,modem_sbp_config[73].SBP_REMOVE_BLACK_CELLS_FROM_REDIR_LIST,OTA and OTA BY OP,no,no,no,yes,"In some scenarios, when UE perform CSFB call the best GSM cell is a bad cell that the network will not response the call after the location update procedure. This feature is for customer to control whether UE will remove the black cells from redirection list to skip camp on those cells for CSFB call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. UE will remove the black cells from redirection list.<BR>0:Disable. UE will not remove the black cells from redirection list.,,,__DISABLE_REMOVE_BLACK_CELLS_FROM_REDIR_LIST__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6197,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_REPORT_CALLED_NUMBER_SUBADDRESS_TYPE,modem_sbp_config[42].SBP_REPORT_CALLED_NUMBER_SUBADDRESS_TYPE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo send the type of called party subaddress to APbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6198,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_REPORT_CELL_INFO_IN_CREG_WHEN_CONNECTED_MODE,modem_sbp_config[22].SBP_REPORT_CELL_INFO_IN_CREG_WHEN_CONNECTED_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport cell info in CREG when connectedbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Report cell info in CREG when connected<BR>0:Not Report cell info in CREG when connected,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-6199,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_REPORT_CSG_LIST_IN_SIGNAL_DECREASING_ORDER,modem_sbp_config[11].SBP_REPORT_CSG_LIST_IN_SIGNAL_DECREASING_ORDER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport CSG list according to signal strength.bit 0:0:Disabled. Not report CSG list in signal decreasing orderbit 1:1:Enabled. Report CSG list in signal decreasing order",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6200,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_REPORT_EIND16_IF_INVALID_SIM_INFO_CHANGED,modem_sbp_config[58].SBP_REPORT_EIND16_IF_INVALID_SIM_INFO_CHANGED,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport EIND:16 only if Invalid SIM Information changedbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"After UE boot-up, check whether AP behaves normally",Pass,,,,
-6201,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_REPORT_MBMS_IN_SERVICE_FOR_SIB15_ONLY_CELL,modem_sbp_config[32].SBP_REPORT_MBMS_IN_SERVICE_FOR_SIB15_ONLY_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTreat LTE cell as support MBMS even only SIB15 broadcast.bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE treat LTE cell as MBMS supported if only SIB15(No SIB13) broadcast.<BR>0:UE treat LTE cell as MBMS non-supported if only SIB15(No SIB13) broadcast.,,,No,MBMS support in LTE (eMBMS),4G,,,,Pass,,,,
-6202,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_REPORT_PS_DETACH_IN_EUTRAN_MT_REATTACH,modem_sbp_config[61].SBP_REPORT_PS_DETACH_IN_EUTRAN_MT_REATTACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurereport ps domain only when reattach bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6203,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after LR13bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-6204,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS_FOR_DATA_SIM,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS_FOR_DATA_SIM,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after LR13bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-6205,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_REQUEST_FIRST_PDP_ACT_WITH_HIGH_PS,modem_sbp_config[77].SBP_REQUEST_FIRST_PDP_ACT_WITH_HIGH_PS,Not Support,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP FeatureFirst PDP Activation request shall take High PS bit, Obsolute 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,NA,,,,MD Config,Modem - Customer Requirement,,,NA,Untested,,,,
-6206,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_RESEL_PINGPONG_AVOIDANCE_FEATURE,modem_sbp_config[101].SBP_RESEL_PINGPONG_AVOIDANCE_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl if apply reselection pingpong avoidance featurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6207,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_RESET_2G_PARAMS_AFTER_PLMN_LIST,modem_sbp_config[102].SBP_RESET_2G_PARAMS_AFTER_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,Manual PLMN List will trigger power scan everytime to ensure no cell is missed out.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Trigger power scan for every List procedure<BR>0:PLMN list will re-use previous scan results if applicable,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6208,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_FAILED,modem_sbp_config[62].SBP_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_FAILED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReset T3402 value after five attepmt to attach failedbit 0:0:Disable. Do not reset T3402 after five attepmt to attach failed.bit 1:1:Enabled. Reset T3402 value after five attepmt to attach failed.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Reset T3402 value after five attepmt to attach failed.<BR>0:Disable. Do not reset T3402 after five attepmt to attach failed.,,,__DO_NOT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_FAILED__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6209,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_RESUME_GPRS_AFTER_LU_ABNORMAL,modem_sbp_config[3].SBP_RESUME_GPRS_AFTER_LU_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure resume of PS session after abnormal LUbit 0:0:Do not resume PS session after abnormal LUbit 1:1:Resume PS session after abnormal LU",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,To disable compilation option __DISABLE_RESUME_GPRS_AFTER_LU_ABNORMAL__ is required,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR> [Init] DUT boot up <BR> [Test Step] >Trigger Location update registration<BR>Trigger Lower layer fail<BR>Observe whether GMM operation is resumed or not,Pass,,,,
-6210,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_RETRY_ECC_SEARCH_DURING_SUSPEND_SEARCH,modem_sbp_config[73].SBP_RETRY_ECC_SEARCH_DURING_SUSPEND_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRetry normal search when emergnecy call comes during current search is due to suspendbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6211,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_RETRY_IVSR_AFTER_GUARD_TIMER,modem_sbp_config[62].SBP_RETRY_IVSR_AFTER_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIf UE is rejected again after IVSR, recover again after guard timer expiry.bit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6212,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_RETRY_PARAMETER_RESTORATION_OF_ILM,modem_sbp_config[40].SBP_RETRY_PARAMETER_RESTORATION_OF_ILM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl modem whether to override NW-provided back-off timer and re-attempt indicator in inter-layer message if they need to be changed according to the handling of back-off mechanismbit 0:0:Modem can override back-off timer and re-attempt indicator in inter-layer message.bit 1:1:Modem can not override back-off timer and re-attempt indicator in inter-layer message.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6213,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_RETRY_SEND_PAGING_RESPONSE,modem_sbp_config[72].SBP_RETRY_SEND_PAGING_RESPONSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRetry send paging response when t3126 expiredbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6214,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_RETURN_RPLMN_RAT_AFTER_MANUAL_SEARCH_FAIL,modem_sbp_config[68].SBP_RETURN_RPLMN_RAT_AFTER_MANUAL_SEARCH_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReturn RPLMN+RAT after manual search failbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,DEFAULT_VALUE : 0 <BR>__RETURN_RPLMN_RAT_AFTER_MANUAL_SEARCH_FAIL__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6215,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_ROAMING_DISABLE_N1_MODE,modem_sbp_config[103].SBP_ROAMING_DISABLE_N1_MODE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurenot disable N1 normal service when Roamingbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine Y<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] Modify the MCF value and power on<BR>[Expected Result] UE should not camp on NR in roaming,Pass,,,,
+6187,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_RECOVERY_SNIFFER_PREFER_LTE,modem_sbp_config[68].SBP_RECOVERY_SNIFFER_PREFER_LTE,Not Support,no,no,no,yes,"If the SBP is off, UE will start recovery search on the RAT which is sniffed. If the SBP is on, UE will sniff LTE again when UE has detected 2/3G signal. It is more possible to camp back to LTE after OOS.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,N/A,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6188,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_REDUCE_T3311_TIMEOUT_FOR_RAU,modem_sbp_config[103].SBP_REDUCE_T3311_TIMEOUT_FOR_RAU,OTA,no,no,no,yes,"In 2G, when L2 ack of RAU request gets failed with cause RLC GPRS resume discard(DC_Status_GAS_RLC_GPRS_Resume_Discard) then <BR>reduce the T3311 timer value from 15secs to 5 secs.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:If enable, Use T3311 timer value of 5 secs when RLC ACK fails with cause GPRS Resume discard<BR>0x00:Use t3311 timer for rau as per spec :",,,This SBP can be controlled by compile option __REDUCE_T3311_TIMEOUT_FOR_RAU__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 2G <BR>-> Trigger PS data cnf with cause DC_Status_GAS_RLC_GPRS_Resume_Discard<BR>-> T3311 should run with reduced time 5 sec<BR>[Expected Result]<BR>T3311 should run with reduced time 5 sec,Pass,,,,
+6189,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_REG_HISTORY_FOR_PLMN_SELECTION,modem_sbp_config[20].SBP_REG_HISTORY_FOR_PLMN_SELECTION,OTA and OTA BY OP,no,no,no,yes,"When fast roaming is enabled, keep tracking previous registration status in non-volatile storage. By doing so, next time UE could camp on the network immediately and improve search performance.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6190,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_REJ_13_SEARCH_NEXT_BEFORE_OTHER_LA_OR_TA,modem_sbp_config[63].SBP_REJ_13_SEARCH_NEXT_BEFORE_OTHER_LA_OR_TA,OTA and OTA BY OP,no,no,no,yes,"If this SBP is off, UE will search the next RAT of current PLMN after rejected by NW with Cause #13.<BR>If this SBP is on, UE will skip searching the current PLMN after rejected by NW with Cause #13 and search the next PLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __REJ_13_SEARCH_NEXT_BEFORE_OTHER_LA_OR_TA__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6191,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[33].SBP_REL10_LTE_PS_ACC_CONGESTION,modem_sbp_config[33].SBP_REL10_LTE_PS_ACC_CONGESTION,OTA and OTA BY OP,no,no,no,yes,"3GPP R11 new behavior(CR1485 C1-123380). If this SBP is disabled, UE will follow R11 behavior to set counter to max and start T3402 upon receiving attach accept or tau accept with EPS only result and cause #22. Otherwise, UE will follow R9/R10 behavior to increase counter upon receiving attach accept or tau accept with EPS only result and cause #22. In other words, UE can try at most 5 times.<BR>From previous field trial experience, the core network infrastructure in some cities in China does not support 3GPP R11 behavior. Maybe it is just a little bit busy for core network at that time, then the network will send EPS only result with cause #22 to UE. The network expect UE retry after a little later. In our experiment, if UE retry some times(less than 5), UE will get combined success result. But if UE follow R11 behavior, it turns out the device will stay in 23G because disabling EUTRAN. To improve user experience, MTK provide this SBP to let user to decide to use R11 or R9/R10 behavior.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Follow R9/R10 behavior for eps only result with cause #22.<BR>0:Disable. Follow R11 behavior for eps only result with cause #22.,,,User could use compile option __REL10_LTE_PS_ACC_CONGESTION__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6192,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_RELEASE_PS_CONN_FOR_EUTRAN_UPDATE,modem_sbp_config[8].SBP_RELEASE_PS_CONN_FOR_EUTRAN_UPDATE,OTA and OTA BY OP,no,no,no,yes,This SBP is to used to release PMM connection when EUTRAN capability is changed.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:NAS shall not release PMM connection when EUTRAN capablity is changes<BR>1:NAS shall release PMM connection when EUTRAN capability is changed.,,,"To enable this feature, compile option __RELEASE_PS_CONN_FOR_EUTRAN_UPDATE_ must be defined",,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6193,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,modem_sbp_config[101].SBP_RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY,OTA,no,no,no,yes,"In 3G, after fifth expiry of T3380 PDP activation timer, MS shall trigger SCRI(signalling connection release indication) to <BR>release the PS signaling connection as stated in 3GPP 24.008, section 6.1.3.2.3. when this SBP is enabled, UE shall release/abort<BR>the RRC connection locally.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x1:If enable, After 5 expiry of T3380 PDP activation timer, MS shall trigger SCRI",,,This SBP can be controlled by compile option __RELEASE_RRC_CONNECTION_LOCALLY_AFTER_T3380_FIFTH_EXPIRY__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR>[Init] DUT boot up <BR>[Test Step] > Trigger CS and PS registration in 3G <BR>-> Trigger connection release from SM<BR>-> If N/W does not release the RRC connection then MM will send the force connection release req to RRCE to release the RRC connection<BR>[Expected Result]<BR>MM will send the force connection release req to RRCE to release the RRC connection,Pass,,,,
+6194,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_REL_12_EPLMN_LIST_HANDLING,modem_sbp_config[29].SBP_REL_12_EPLMN_LIST_HANDLING,OTA and OTA BY OP,no,no,no,yes,"This SBP is used for CMCC R12 new feature: do not delete equivalent PLMNs when receiving reject cause #9,#10 and #40 in 4G tracking area update procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,modem_sbp_config[61].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT,OTA and OTA BY OP,no,no,no,yes,"When UE is in 3G, during Manual PLMN Search, This SBP if enable releases PS signaling connection (if not released by network) once all PDP gets deactivated. This is done through GUARD Timer. When GUARD timer is started once all PDP are deactivated successfully and UE is in process of manual PLMN listing. After timer Expiry,UE shall release the PS signaling connection (if not released by Network yet ). If this SBP is ON : During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivated. If this SBP is OFF : During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated<BR>0:During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivated",,,"if compile option __SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PDP_DEACT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : N<BR> Test Time (minutes) :NA<BR> [Init] <BR> [Test Step]<BR> 1. Perform PDP deactivation <BR> 2. Network not send RRC connection release <BR> [Expected Result]<BR> 3. UE send SCRI after 10 secs,Pass,,,,
+6196,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_REMOVE_BLACK_CELLS_FROM_REDIR_LIST,modem_sbp_config[73].SBP_REMOVE_BLACK_CELLS_FROM_REDIR_LIST,OTA and OTA BY OP,no,no,no,yes,"In some scenarios, when UE perform CSFB call the best GSM cell is a bad cell that the network will not response the call after the location update procedure. This feature is for customer to control whether UE will remove the black cells from redirection list to skip camp on those cells for CSFB call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. UE will remove the black cells from redirection list.<BR>0:Disable. UE will not remove the black cells from redirection list.,,,This feature could be enabled by defining compiler option __ENABLE_REMOVE_BLACK_CELLS_FROM_REDIR_LIST__.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6197,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_REPORT_CALLED_NUMBER_SUBADDRESS_TYPE,modem_sbp_config[42].SBP_REPORT_CALLED_NUMBER_SUBADDRESS_TYPE,OTA and OTA BY OP,no,no,no,yes,To send the type of called party sub address to AP. The type of call number sub address is extracted from SETUP message and sent to AP.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,__SUBADDR_SUPPORT__ must be enabled to have this feature supporting.,,,,,,Pass,,,,
+6198,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_REPORT_CELL_INFO_IN_CREG_WHEN_CONNECTED_MODE,modem_sbp_config[22].SBP_REPORT_CELL_INFO_IN_CREG_WHEN_CONNECTED_MODE,OTA and OTA BY OP,no,no,no,yes,Report cell info in CREG when connected,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Report cell info in CREG when connected<BR>0:Not Report cell info in CREG when connected,,,"To enable this feature, compile option __REPORT_CELL_INFO_IN_CREG_WHEN_CONNECTED_MODE__ must be defined",MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+6199,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[11].SBP_REPORT_CSG_LIST_IN_SIGNAL_DECREASING_ORDER,modem_sbp_config[11].SBP_REPORT_CSG_LIST_IN_SIGNAL_DECREASING_ORDER,OTA and OTA BY OP,no,no,no,yes,Report CSG list according to signal strength. NAS will help to order the CSG list if this SBP is turned on.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __REPORT_CSG_LIST_IN_SIGNAL_DECREASING_ORDER__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6200,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_REPORT_EIND16_IF_INVALID_SIM_INFO_CHANGED,modem_sbp_config[58].SBP_REPORT_EIND16_IF_INVALID_SIM_INFO_CHANGED,OTA,no,no,no,yes,Report +EIND:16 only if invalid SIM information changed.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,"After UE boot-up, check whether AP behaves normally",Pass,,,,
+6201,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_REPORT_MBMS_IN_SERVICE_FOR_SIB15_ONLY_CELL,modem_sbp_config[32].SBP_REPORT_MBMS_IN_SERVICE_FOR_SIB15_ONLY_CELL,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to decide if UE should treat a LTE cell as MBMS supported when only SIB15(no SIB13) broadcast.<BR>When SBP eable, UE should treat a LTE cell as MBMS supported when only SIB15(no SIB13) broadcast.That's means UE still can camp on this LTE cell as MBMS supported cell even if only SIB15 broadcast.<BR>When SBP disable, UE should treat a LTE cell as MBMS NOT supported when only SIB15(no SIB13) broadcast.That's means UE won't camp on this LTE cell as MBMS supported cell even if only SIB15 broadcast.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE treat LTE cell as MBMS supported if only SIB15(No SIB13) broadcast.<BR>0:UE treat LTE cell as MBMS non-supported if only SIB15(No SIB13) broadcast.,,,N/A,MBMS support in LTE (eMBMS),4G,,,,Pass,,,,
+6202,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[61].SBP_REPORT_PS_DETACH_IN_EUTRAN_MT_REATTACH,modem_sbp_config[61].SBP_REPORT_PS_DETACH_IN_EUTRAN_MT_REATTACH,OTA and OTA BY OP,no,no,no,yes,"If EMM detach type is PS domain and will reattach, RAC will tell L4C not to skip the REG_STATE_IND with is_skip flag (KAL_FALSE). Therefore, middle man and AP will know the reattach procedure is ongoing and the real registration state.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,"if compile option __REPORT_PS_DETACH_IN_EUTRAN_MT_REATTACH__ is defined, the SBP is enabled",,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6203,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS,Not Support,no,no,no,yes,"When SBP is enabled, GPRS attach will be performed with High PS semaphore for non-data preferred SIM as well.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __SBP_REQUEST_ATTACH_WITH_HIGH_PS__ is defined, only then the SBP will be enabled",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+6204,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS_FOR_DATA_SIM,modem_sbp_config[76].SBP_REQUEST_ATTACH_WITH_HIGH_PS_FOR_DATA_SIM,Not Support,no,no,no,yes,"GPRS attach on data preferred SIM performed with Medium PS semaphore gets pre-empted due to activity on peer SIM which takes High PS semaphore, The ping-pong scenario of GPRS attach being triggered with Medium PS and peer SIM pre-empting it, caused incomplete GPRS attach on the data preferred SIM.<BR>When this SBP is enabled, MM aqcuires High PS semaphore for GMM attach on data preferred SIM.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"The SBP is enabled by default. But if compile option __SBP_DISABLE_REQUEST_ATTACH_WITH_HIGH_PS_FOR_DATA_SIM__ is defined, then SBP will be disabled",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+6205,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_REQUEST_FIRST_PDP_ACT_WITH_HIGH_PS,modem_sbp_config[77].SBP_REQUEST_FIRST_PDP_ACT_WITH_HIGH_PS,Not Support,no,no,no,no,First PDP Activation request shall take High PS.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,NA,,,"if compile option __SBP_DISABLE_REQUEST_FIRST_PDP_ACT_WITH_HIGH_PS__ is defined, the SBP is disabled",MD Config,Modem - Customer Requirement,,,NA,Untested,,,,
+6206,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[101].SBP_RESEL_PINGPONG_AVOIDANCE_FEATURE,modem_sbp_config[101].SBP_RESEL_PINGPONG_AVOIDANCE_FEATURE,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to enable/disable the reselection ping-pong avoidance feature,<BR>including ping-pong avoidance by stored sibs enhancement, and AB ping-pong avoidance enhancement.<BR>1. ping-pong avoidance by stored sibs enhancement : Predict if UE will re-select back to current serving cell after re-selection performed, based on stored system information and available signal quality of serving and neighbor cell, if prediction holds, skip this re-selection to avoid re-selection ping-pong<BR>2. AB ping-pong avoidance enhancement : If UE keeps re-selecting between A, B cell over specific counts within given interval, skip the following re-selections which target cell is either A or B, until timer for this enhancement expired.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6207,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_RESET_2G_PARAMS_AFTER_PLMN_LIST,modem_sbp_config[102].SBP_RESET_2G_PARAMS_AFTER_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,If this SBP is ON GAS will re-do PLMN List everytime.<BR>Else GAS reports the previous list results if applicable.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Trigger power scan for every List procedure<BR>0:PLMN list will re-use previous scan results if applicable,,,If __DISABLE_RESET_2G_PARAMS_AFTER_PLMN_LIST__ is defined it would be disabled; otherwise the enhancement is enabled by default.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6208,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_FAILED,modem_sbp_config[62].SBP_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_FAILED,OTA and OTA BY OP,no,no,no,yes,"For some operators, NW may expected that UE use the default value of T3402 for five attepmt to attach failed.<BR>MTK provides a solution. If this SBP is enabled, UE will reset the T3402 as default value(12 mins) and start the T3402 after five attepmt to attach failed.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Reset T3402 value after five attepmt to attach failed.<BR>0:Disable. Do not reset T3402 after five attepmt to attach failed.,,,User could use compile option __DO_NOT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_FAILED__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6209,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_RESUME_GPRS_AFTER_LU_ABNORMAL,modem_sbp_config[3].SBP_RESUME_GPRS_AFTER_LU_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"For non-DTM UE, GPRS is suspended when LU procedure is ongoing.<BR>This feature is to decide whether to resume GPRS when LU abnormal.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"To disable this feature, compile option __DISABLE_RESUME_GPRS_AFTER_LU_ABNORMAL__ must be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 10 mins <BR> [Init] DUT boot up <BR> [Test Step] >Trigger Location update registration<BR>Trigger Lower layer fail<BR>Observe whether GMM operation is resumed or not,Pass,,,,
+6210,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[73].SBP_RETRY_ECC_SEARCH_DURING_SUSPEND_SEARCH,modem_sbp_config[73].SBP_RETRY_ECC_SEARCH_DURING_SUSPEND_SEARCH,OTA and OTA BY OP,no,no,no,yes,"This SBP aims for enhancing UI. When emergency call comes and UE is in searching state due to being suspended by the other SIM, VDM will request NWSEL to perform ANY plmn search.<BR>(1) If this SBP is turned on, NWSEL will retry normal service search one time(5 seconds). If UE finds suitable cell within 5 seconds, the ANY plmn search will not need anymore, and UI will still be in normal service. If UE cannot find suitable cell within 5 seconds, NWSEL will execute ANY plmn search because emergency call is urgent, and UI will show no service when accetable cell is found.<BR>(2) If this SBP is turned off, NWSEL will execute ANY plmn search directly because emergency call is urgent, and UI will show no service when accetable cell is found.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature is controlled by __DISABLE_RETRY_ECC_SEARCH_DURING_SUSPEND_SEARCH__.,,,,,,Pass,,,,
+6211,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_RETRY_IVSR_AFTER_GUARD_TIMER,modem_sbp_config[62].SBP_RETRY_IVSR_AFTER_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,"UE may trigger IVSR after SIM is set to invalid due to LR causes. Assume that UE is rejected again and SIM is set to invalid after IVSR. If this SBP is turned off, the UE will regard the SIM is invalid. If this SBP is turned on, the UE will wait a IVSR gaurd timer and re-trigger IVSR. Please refer to SBP_ENABLE_MODEM_IVSR for details of IVSR feature.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __RETRY_IVSR_AFTER_GUARD_TIMER__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6212,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_RETRY_PARAMETER_RESTORATION_OF_ILM,modem_sbp_config[40].SBP_RETRY_PARAMETER_RESTORATION_OF_ILM,OTA and OTA BY OP,no,no,no,yes,"This SBP controls whether to restore the following retry-related parameters, including the Back-off timer IE and the Re-attempt indicator IE, in an ESM/SM reject message from the network. Considering that the network may incorrectly configure these parameters, the UE shall be able to identify it and make a correction to follow the back-off mechanism in TS 24.301 and TS 24.008. <BR><BR>For the following branches:<BR>- NR15.R3.MP<BR>- VMOLY TRUNK<BR>- NR15.R3.MP.TC10.SP<BR>This SBP also takes effect to the Back-off timer IE in 5GSM procedures as defined in TS 24.501.<BR><BR>If the SBP is on, the modem will send the inter-layer message to upper layer without overriding any of these parameters even it decides to make a correction for these parameters. So upper layer receives these original parameter as given by the network. <BR>If the SBP is off, the modem will send the inter-layer message to upper layer with the overridden result of these parameters when it decides to make a correction for them. So upper layer receives the processed parameters as given by the lower layer module.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6213,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_RETRY_SEND_PAGING_RESPONSE,modem_sbp_config[72].SBP_RETRY_SEND_PAGING_RESPONSE,OTA and OTA BY OP,no,no,no,yes,"As VIVO request, UE need retry sending paging response if RACH fail on GSM and reselect to a new cell succesful.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6214,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[68].SBP_RETURN_RPLMN_RAT_AFTER_MANUAL_SEARCH_FAIL,modem_sbp_config[68].SBP_RETURN_RPLMN_RAT_AFTER_MANUAL_SEARCH_FAIL,OTA and OTA BY OP,no,no,no,yes,"When SBP_DISABLE_AUTO_RETURN_PRE_RPLMN is off, UE will return previous RPLMN automatically when manual search fail. The RAT order of previous RPLMN is according to the UE RAT order priority. (For example, 4G -> 3G -> 2G) If this SBP is turned on, UE searches previous RPLMN RAT first after manual search fail. That is, if previous RPLMN RAT is 3G, UE will search 3G -> 4G -> 2G when reutrn previous RPLMN RAT. UE has higher possibilty to return RPLMN more efficient, but UE may not go back to higher RAT as a trade-off.",BIT,1,,1,DEFAULT_VALUE : 0 <BR>__RETURN_RPLMN_RAT_AFTER_MANUAL_SEARCH_FAIL__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __RETURN_RPLMN_RAT_AFTER_MANUAL_SEARCH_FAIL__ is defined, the SBP is enabled. This SBP works when SBP_DISABLE_AUTO_RETURN_PRE_RPLMN is off.",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6215,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_ROAMING_DISABLE_N1_MODE,modem_sbp_config[103].SBP_ROAMING_DISABLE_N1_MODE,OTA,no,no,no,yes,"SBP On, UE disable N1 normal service when Roaming for specific operator requirement<BR>UE will not search the Roaming PLMN on NR<BR>Besides, the cell re-selection is also not allowed from the Roaming PLMN of non-NR RAT when camping on non-NR Roaming PLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This feature is controlled by __ROAMING_DISABLE_N1_MODE__ flag,MD Config,Modem - Customer Requirement,,,Test in machine Y<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] Modify the MCF value and power on<BR>[Expected Result] UE should not camp on NR in roaming,Pass,,,,
6216,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[27].SBP_ROAMING_NOT_ALLOW_AS_NO_SUITABLE,modem_sbp_config[27].SBP_ROAMING_NOT_ALLOW_AS_NO_SUITABLE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRoaming not allow cause behaves the same as no suitable cell cause.bit 0:0:Turn-off. Roaming not allow is not the same as no suitable cellbit 1:1:Turn-on. Roaming not allow behaves the same as no suitable cell",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6217,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_ROAMING_REJ_CAUSE_7_8_MAPPING_TO_15,modem_sbp_config[56].SBP_ROAMING_REJ_CAUSE_7_8_MAPPING_TO_15,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReject cause #7/#8 mapping to reject cause #15 in roaming PLMNbit 0:0:Disable. Follow spec #7/#8 handlingbit 1:1:Enabled. Reject cause mapping #7 or #8 to #15 and follow #15 handling in roaming PLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. AUTH reject mapping to cause #15 and follow #15 handling.<BR>0:Disable. Follow spec AUTH reject handling.,,,__SBP_LTE_AUTH_REJ_MAPPING_TO_15__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6218,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_ROHC_COMPR_DECOMPR_TRACE,modem_sbp_config[72].SBP_ROHC_COMPR_DECOMPR_TRACE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePrint RoHC Compression and Decompression Info on PS intergratedbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): N<BR>Test Time (minutes): 5<BR><BR>[Init] <BR>Attach to LTE and IMS PDN is activated. VoLTE icon is available.<BR><BR>[Test Step] <BR>1. Start MO VoLTE call<BR><BR>[Expected Result]<BR>ROHC traces are outputted by MOD_ENPDCP in PS Integrated View. You can find the following traces.<BR><BR>[ENPDCP][UL][ROHC] DRB RoHC data compressed<BR>[ENPDCP][DL][ROHC] DRB RoHC data processed,Pass,,,,
-6219,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_RPLMN_HPLMN_COMBINED_SEARCH,modem_sbp_config[2].SBP_RPLMN_HPLMN_COMBINED_SEARCH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureallow searching HPLMN/RPLMN together during power-on/recover searchbit 0:0:Turn-off. Not search RPLMN and HPLMN togetherbit 1:1:Turn-on. Search RPLMN and HPLMN together",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6220,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_RRC_CONN_REL_CAUSE_IND,modem_sbp_config[41].SBP_RRC_CONN_REL_CAUSE_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo enable provide RRC Connection Release Causebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. It means that UE forcefully releases the RR connection to initating rat mode change procedure to access stratum<BR>0:Disabled. It means that UE waits for RR connection to get released by network before initating rat mode change procedure to access stratum,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-6221,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_RRC_RECEIVING_SIB_IN_DCH_MODE,modem_sbp_config[22].SBP_RRC_RECEIVING_SIB_IN_DCH_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to receive SIB in DCH mode of 3G",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6222,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_RTP_FLOW_USE_CID_0,modem_sbp_config[75].SBP_RTP_FLOW_USE_CID_0,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAlways use RoHC Context with CID 0 for RTP flowbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes): 5<BR><BR>[Init] <BR>Attach to LTE and IMS PDN is activated. VoLTE icon is available.<BR>[Test Step] <BR>1. MO VoLTE call for 1 min<BR>2. MT VoLTE call for 1 min<BR>[Expected Result]<BR>ROHC uses cid 0 for handling ROHC RTP data. This can be found in L2 trace. E.g.,<BR><BR>[ROHC-D][PKT] (cid 0, profile_id 0x1, rb_idx 2) is matched",Pass,,,,
-6223,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_RTT_BAR_BAD_CELL,modem_sbp_config[90].SBP_RTT_BAR_BAD_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurebar the bad cell when access max probe 3 timesbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,none,Pass,,,,
-6224,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_SAT_NOTIFY_PLMN_BEFORE_READ_IMSI,modem_sbp_config[15].SBP_SAT_NOTIFY_PLMN_BEFORE_READ_IMSI,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSend Verizon formatted PLMN information to SIM card and perform read/change IMSI procedure.bit 0:0:Disable. Not send Verizon formatted PLMN information.bit 1:1:Enable. Send Verizon formatted PLMN information and perform Verizon read/change IMSI procedure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,(VzW) Power-on and SIM Activation,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6225,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_SAT_NO_EVDL_IN_SESSION,modem_sbp_config[4].SBP_SAT_NO_EVDL_IN_SESSION,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureStore and reissue event download envelope when in SAT sessionbit 0:0:Disable. Send Event Download during SAT session.bit 1:1:Enable. DO NOT send Event Download until the end of SAT session",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6226,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_SAT_OP20_PEND_REFRESH_WHEN_OTA,modem_sbp_config[71].SBP_SAT_OP20_PEND_REFRESH_WHEN_OTA,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDelay REFRESH command during Sprint OTAbit 0:0:Disablebit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6227,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_SAT_PROVIDE_PS_LOCAL_INFO,modem_sbp_config[7].SBP_SAT_PROVIDE_PS_LOCAL_INFO,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. No need after UMOLYAbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-6228,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_SAT_READ_PNN_ON_REFRESH,modem_sbp_config[30].SBP_SAT_READ_PNN_ON_REFRESH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePerform additional read of EF_PNN on REFRESHbit 0:0:Disable. Do not perform additional read of EF_PNN.bit 1:1:Enable. Perform additional read of EF_PNN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6229,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_SAT_REFRESH_DATA_POLICY_VALID_ON_VOICE_CALL,modem_sbp_config[93].SBP_SAT_REFRESH_DATA_POLICY_VALID_ON_VOICE_CALL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureApply Data Call Enforcement Policy on Voice Callbit 0:0:Disable. Don't apply DATA enforcement policy on voice call.bit 1:1:Enable. Apply DATA enforcement policy on voice call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6230,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_SAT_REISSUE_REFRESH_AFTER_CALL_END,modem_sbp_config[8].SBP_SAT_REISSUE_REFRESH_AFTER_CALL_END,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRe-issue REFRESH at the end of a callbit 0:0:Disable. Do not re-issue REFRESH at the end of a call.bit 1:1:Enable. Re-issue REFRESH at the end of a call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6231,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_AFTER_SMS_ACK,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_AFTER_SMS_ACK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWait for the end of SMS session when receiving REFRESH after SMS PP Downloadbit 0:0:Disable. Perform REFRESH dicarding SMS session.bit 1:1:Enable. Re-issue REFRESH at the end of SMS session.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6232,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_WHEN_UE_IDLE_AFTER_CALL_END,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_WHEN_UE_IDLE_AFTER_CALL_END,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReissue REFRESH when UE enters in IDLE mode after call endbit 0:0:Disable. Re-issue UICC RESET/NAA Session RESET type of REFRESH at the end of the call.bit 1:1:Enable. Re-issue UICC RESET/NAA Session RESET type of REFRESH when UE enters in IDLE mode after the call end.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6233,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_SAT_SPRINT_IMEI_LOCK_WITHOUT_SIM_RECOVERY,modem_sbp_config[32].SBP_SAT_SPRINT_IMEI_LOCK_WITHOUT_SIM_RECOVERY,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSkip recovery procedure for Sprint SIM card lock mechanismbit 0:0:Disable. Discard Sprint SIM lock mechanism.bit 1:1:Enable. Enable Sprint SIM lock mechanism and skip recovery procedure if SIM card is locked.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6234,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_SAT_UICC_RESET_AFTER_REFRESH_FAILS,modem_sbp_config[80].SBP_SAT_UICC_RESET_AFTER_REFRESH_FAILS,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReset UICC after times of fail of REFRESHbit 0:0:Disablebit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6235,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_SAT_USSD_INFORM_USER_WHEN_NO_ALPHA_ID,modem_sbp_config[94].SBP_SAT_USSD_INFORM_USER_WHEN_NO_ALPHA_ID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature enable inform user when no alpha id presentbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6236,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_SAT_USSD_NOT_INFORM_USER,modem_sbp_config[28].SBP_SAT_USSD_NOT_INFORM_USER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot inform user about the response of SAT USSD through +CUSD URCbit 0:0:Inform user SAT USSD resultbit 1:1:Not inform user SAT USSD result(MD send +CUSD: 3)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6237,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_SAT_ZERO_POLICY_WAIT_FOR_CALL,modem_sbp_config[71].SBP_SAT_ZERO_POLICY_WAIT_FOR_CALL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWait for call disconnection if REFRESH policy is zerobit 0:0:Disablebit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6238,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_SAVE_T3402_IN_NVRAM,modem_sbp_config[40].SBP_SAVE_T3402_IN_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresave the T3402 value and the PLMN to NVRAM when power offbit 0:0:Disable. UE will use the T3402 as default value as TS24.301 requiredbit 1:1:Enabled. UE will store the T3402 value when power off and UE can use the value later after power on again",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will store the T3402 value when power off and UE can use the value later after power on again.<BR>0:Disable. UE will use the T3402 as default value as TS24.301 required.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6239,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SCA_CONFIGURED_BY_CUSTOMER,modem_sbp_config[31].SBP_SCA_CONFIGURED_BY_CUSTOMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIs SCA configured by customer in custom filebit 0:0:Disabled. SCA is not configured by customer in custom filebit 1:1:Enabled. SCA is configured by customer in custom file(If customer did not use the file to configure, MD will load EFsmsp's SCA)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-6240,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_SCC_T3396_REMAINS_WHEN_PLMN_CHANGE,modem_sbp_config[10].SBP_SCC_T3396_REMAINS_WHEN_PLMN_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to keep T3396 running when PLMN changebit 0:0:Stop T3396 when PLMN change.bit 1:1:Keep T3396 running when PLMN change.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6241,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_2G,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_2G,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6242,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_3G,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_3G,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6243,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_DISABLE_SMS_OVER_SGS,modem_sbp_config[14].SBP_SDM_DISABLE_SMS_OVER_SGS,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6244,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_SDM_DISABLE_SMS_OVER_WIFI,modem_sbp_config[32].SBP_SDM_DISABLE_SMS_OVER_WIFI,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6245,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_SDM_IMS_SMART_CONGESTION_REPORT_TO_AP,modem_sbp_config[32].SBP_SDM_IMS_SMART_CONGESTION_REPORT_TO_AP,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6246,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_PREFER_SMS_OVER_SGS_TO_IMS,modem_sbp_config[14].SBP_SDM_PREFER_SMS_OVER_SGS_TO_IMS,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6247,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_SDM_RETRY_CS_DOMAIN_WHEN_IMS_TR1M_EXPIRY,modem_sbp_config[29].SBP_SDM_RETRY_CS_DOMAIN_WHEN_IMS_TR1M_EXPIRY,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6248,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_RETRY_CS_WHEN_IMS_SEND_FAIL,modem_sbp_config[14].SBP_SDM_RETRY_CS_WHEN_IMS_SEND_FAIL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6249,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_SDM_RETRY_IMS_WHEN_CS_SEND_FAIL,modem_sbp_config[13].SBP_SDM_RETRY_IMS_WHEN_CS_SEND_FAIL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6250,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_SDM_RETRY_IMS_WHEN_IMS_SEND_FAIL,modem_sbp_config[24].SBP_SDM_RETRY_IMS_WHEN_IMS_SEND_FAIL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6251,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_TRY_CS_WHEN_2G_VOICE_CALL,modem_sbp_config[14].SBP_SDM_TRY_CS_WHEN_2G_VOICE_CALL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionalitybit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6252,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_SEARCH_23G_FOR_AC_BARRED_MO_CSFB,modem_sbp_config[40].SBP_SEARCH_23G_FOR_AC_BARRED_MO_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhen network is ac barred for CSFB, then force select 2/3G to process the CS servicebit 0:0:Disabled. UE will not force select 2/3G to process the CS service when network is ac barred forbit 1:1:Enabled. UE will force select 2/3G to process the CS service when network is ac barred for CSFB",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will force select 2/3G to process the CS service when network is ac barred for CSFB<BR>0:Disabled. UE will not force select 2/3G to process the CS service when network is ac barred for CSFB,,,__EMM_SEARCH_23G_FOR_AC_BARRED_MO_CSFB__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6253,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_SEARCH_4G_WHEN_FIRST_PS_ATTACH,modem_sbp_config[20].SBP_SEARCH_4G_WHEN_FIRST_PS_ATTACH,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSearch 4G when first PS attach.bit 0:0:Disabled. Not search 4G when first PS attachbit 1:1:Enabled. Search 4G when first PS attach",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6254,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_SEARCH_AVAILABLE_PLMN_IMMEDIATELY,modem_sbp_config[20].SBP_SEARCH_AVAILABLE_PLMN_IMMEDIATELY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSearch found PLMN directly and do not consider if found PLMN is the PLMN of highest priority.bit 0:0:Disabled. Consider network priority when a PLMN is foundbit 1:1:Enabled. Not consider network priority when a PLMN is found",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6255,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_SEARCH_LTE_FIRST_EVEN_NO_ACT_IN_SIM,modem_sbp_config[95].SBP_SEARCH_LTE_FIRST_EVEN_NO_ACT_IN_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNWSEL will search LTE first even there is no LTE ACT in SIMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6256,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_SEARCH_LTE_ON_T3402_EXPIRY,modem_sbp_config[71].SBP_SEARCH_LTE_ON_T3402_EXPIRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSearch RAT_LTE for KT operator as soon as ABNORMAL_RAI_TIMER/T3402_TIMER has expiredbit 0:0:Not Enablebit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6257,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_SEARCH_NOT_PREFERRED_AVAILABLE_PLMN,modem_sbp_config[20].SBP_SEARCH_NOT_PREFERRED_AVAILABLE_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWith fast roaming, if no preferred network in this country, UE can directly search not preferred but available network.bit 0:0:Disabled. Still need to wait for fullband searchbit 1:1:Enabled. UE can directly search not preferred but available network",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6258,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_SEARCH_NR_FIRST_EVEN_NO_ACT_IN_SIM,modem_sbp_config[95].SBP_SEARCH_NR_FIRST_EVEN_NO_ACT_IN_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNWSEL will search NR first even there is no NR ACT in SIMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6259,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_SEARCH_TARGET_RAT_ONLY_FOR_MANUAL_SEARCH,modem_sbp_config[67].SBP_SEARCH_TARGET_RAT_ONLY_FOR_MANUAL_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSearch the PLMN/RAT selected by the user and skip other RATs for manual searchbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,DEFAULT_VALUE :0 <BR>__SEARCH_TARGET_RAT_ONLY_FOR_MANUAL_SEARCH__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6260,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_SEARCH_THIS_RAT_HIGHEST_NETWORK,modem_sbp_config[29].SBP_SEARCH_THIS_RAT_HIGHEST_NETWORK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureFor fast roaming special optimization, if current found network is the highest priority network of current RAT. Search it immediately to speed up camp-on.bit 0:0:Turn-off. Do not search the highest priority network of current RAT immediatelybit 1:1:Turn-on. Search the highest priority network of current RAT immediately",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6261,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_SEARCH_WHEN_RUDE_WAKEUP,modem_sbp_config[42].SBP_SEARCH_WHEN_RUDE_WAKEUP,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo send the Screen on REQ when received AT+EFD=3,1bit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,DEFAULT_VALUE :0 <BR>__SEARCH_WHEN_RUDE_WAKEUP__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6262,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_SEL_AUTO_MODE_FROM_MANUAL_MODE_IF_REFRESH_TYPE_RESET,modem_sbp_config[42].SBP_SEL_AUTO_MODE_FROM_MANUAL_MODE_IF_REFRESH_TYPE_RESET,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChange PLMN sel mode to AUTO if sim resetbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"Trigger SIM refresh and perform manual selection, check whether UE can behave normally",Pass,,,,
-6263,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_SEND_NW_REG_REJ_CAUSE_IND,modem_sbp_config[70].SBP_SEND_NW_REG_REJ_CAUSE_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSend NW Reject cause URC to APbit 0:0:Not Enablebit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6264,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING,modem_sbp_config[35].SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureBy turning on SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING, PCO will be seperated into plain and cipher parts. The plain part will be transferred in Inital Attach PDN Connectivity Request. And the cipher part will be transferred using ESM information procedure.bit 0:0:Disable: PCO will transfered using ESM information procedurebit 1:1:Enable: PCO is seperated into plain/cipher part. The plain part will be transferred in Inital Attach PDN Connectivity Request. The cipher part will be transferred using ESM information procedure",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,"if enablng compile option __SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING__, SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING will be turned on also.",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>enablng compile option __SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING__<BR>[Test Step]<BR>UE initial attach PDN connectivity request to network<BR>[Expected Result]<BR>If PCO are provieded, UE will transfered it using ESM information procedure as TS24.301 illustrated. By turning on SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING, PCO will be seperated into plain and cipher parts. The plain part will be transferred in Inital Attach PDN Connectivity Request. And the cipher part will be transferred using ESM information procedure. Note that APN will be transfered using ESM information procedure.",Pass,,,,
-6265,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_SESSION_CONGESTION_CONTROL_SUPPORT,modem_sbp_config[38].SBP_SESSION_CONGESTION_CONTROL_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to support session management level congestion control (T3396/Back-off timer)bit 0:0:UE does not support the T3396/Back-off timer feature.bit 1:1:UE supports the T3396/Back-off timer feature.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6266,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_SET_AS_REL_R9_IN_CHINA,modem_sbp_config[66].SBP_SET_AS_REL_R9_IN_CHINA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureset as release to R9 in China when CA disabledbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disabled,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR>Test Time (minutes) : 10<BR>[Init] set UE CA capability disabled, CMCC SIM inserted<BR>[Test Step] <BR>1. camp on CMCC network<BR>[Expected Result] <BR>check the reported AS release value for SBP in & off",Pass,,,,
-6267,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_SET_FOLLOW_ON_REQUEST_FOR_IMS_PDP,modem_sbp_config[23].SBP_SET_FOLLOW_ON_REQUEST_FOR_IMS_PDP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet FOR bit in RAU for IMS PDPbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If this SBP is enabled, UE shall set FOR( follow-on request) bit in RAU procedure if PDP context status contains IMS PDP.",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6268,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_SET_FOR_BIT_IN_ATTACH_RAU_WHEN_DATA_ENABLED,modem_sbp_config[77].SBP_SET_FOR_BIT_IN_ATTACH_RAU_WHEN_DATA_ENABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set FOR bit in GMM ATTACH or RAU when data enabled and PDP activation will follow<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Disable<BR>0x01:Enable,,,__SBP_ENABLE_SET_FOR_BIT_IN_ATTACH_RAU_WHEN_DATA_ENABLED__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6269,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_SET_MS_NW_CAPA_TO_DEFAULT_SIZE,modem_sbp_config[99].SBP_SET_MS_NW_CAPA_TO_DEFAULT_SIZE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureByte_3 of MS_NETWORK_CAPABILITY is not included in GMM_ATTACH_REQ and RAU_REQ when test SIM is inserted and RAT_MODE does not support LTEbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Byte_3 of MS_NETWORK_CAPABILITY is included in GMM_ATTACH_REQ and RAU_REQ when test SIM is inserted and RAT_MODE does not support LTE<BR>0:Byte_3 of MS_NETWORK_CAPABILITY is not included in GMM_ATTACH_REQ and RAU_REQ when test SIM is inserted and RAT_MODE does not support LTE,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (minutes) 10<BR>[Init]<BR>Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated<BR>[Test Step] <BR>Perform registration in 3G<BR>[Expected Result] <BR>EPC support sttus bit in MS_NETWORK_CAPABILITY_IE ( Byte_3)",Pass,,,,
-6270,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_SET_RAT_MODE_LTE_ONLY,modem_sbp_config[85].SBP_SET_RAT_MODE_LTE_ONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature to avoid setting rat mode to LWG for CT4G card as CT does not have WG and can impact the performance. Note that if rat mode set to C2K only, the performance issue with WG rat mode will not happen, so rat mode change to LTE Only is not needed.<BR>Bit 0 is Disabled; Bit 1 is Enabled.<BR>To add new operator for the feature, customer can modify the custom released file: custom_nvram_extra.c. Add the corresponding PLMN to the array table "customCtPlmn".",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"Plug in CT card. rat mode set to non C2K only mode(ex: LWG).<BR>After enabling the SBP, rat mode should be locked at LTE.",Pass,,,,
-6271,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_SHORT_T3417EXT,modem_sbp_config[62].SBP_SHORT_T3417EXT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet short T3417EXT for specific opearatorbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Set short T3417EXT for specific opearator.<BR>0:Disable. Don't Set short T3417EXT for specific opearator.,,,__SHORT_T3417EXT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6272,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_SIM_BLOCK_AT_CSIM,modem_sbp_config[99].SBP_SIM_BLOCK_AT_CSIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature disable CSIM at commandsbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6273,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_SIM_DETECTION_ENHANCE_MODE,modem_sbp_config[56].SBP_SIM_DETECTION_ENHANCE_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This SBP is not used anymore.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6274,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_SIM_EUICC_SUPPORT,modem_sbp_config[102].SBP_SIM_EUICC_SUPPORT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport eUICC as GSMA SGP.22bit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6275,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_SIM_FAST_RECOVERY_REPORT,modem_sbp_config[64].SBP_SIM_FAST_RECOVERY_REPORT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable URC for fast recovery counterbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6276,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_SIM_UPDATE_RPM_VER,modem_sbp_config[92].SBP_SIM_UPDATE_RPM_VER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUpdating EF RPM Version Implemented during SIM power onbit 0:0:Disablebit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6277,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_SKIP_POWER_SCAN_4G2_CSFB_REDIRECTION,modem_sbp_config[94].SBP_SKIP_POWER_SCAN_4G2_CSFB_REDIRECTION,OTA and OTA BY OP,no,no,no,yes,"If 2G fails to find a cell from Stored and redirection list, RR will further not trigger any power scan to find a cell.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Will not trigger any power scan to find a cell.<BR>0:Power scan will be triggred to find a cell.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6278,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_SKIP_VDP_IE_IN_ATTACH_TAU_REQ,modem_sbp_config[56].SBP_SKIP_VDP_IE_IN_ATTACH_TAU_REQ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not include the VDP IE in ATTACH and TAU requestbit 0:0:Disable. Follow spec handlingbit 1:1:Enabled. Do not include the VDP IE in ATTACH and TAU request",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Do not include the VDP IE in ATTACH and TAU request.<BR>0:Disable. Follow spec handling.,,,__SKIP_VDP_IE_IN_ATTACH_TAU_REQ__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6279,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_SLT,modem_sbp_config[15].SBP_SLT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureInternal use for system level test.bit 0:0:Turn-off. Not support system level testbit 1:1:Turn-on. Support system level test",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Untested,,,,
-6280,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_SMART_RELEASE,modem_sbp_config[103].SBP_SMART_RELEASE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger local release for PLMN list procedurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6281,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_KT,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_KT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable SMS customizations for KT operatorbit 0:0:SMS customizations for KT operator not enabledbit 1:1:SMS customizations for KT operator enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-6282,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_LGU,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_LGU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable SMS customizations for LGU operatorbit 0:0:SMS customizations for LGU operator not enabledbit 1:1:SMS customizations for LGU operator enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"[0,1]",,,,,,,,,Pass,,,,
-6283,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_SKT,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_SKT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable SMS customizations for SKT operatorbit 0:0:SMS customizations for SKT operator not enabledbit 1:1:SMS customizations for SKT operator enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,,Pass,,,,
-6284,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_SM_DISABLE_PS_SIG_CONN_RETRY_TIMER,modem_sbp_config[25].SBP_SM_DISABLE_PS_SIG_CONN_RETRY_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable SM PS signalling connection retry timerbit 0:0:SM enable PS Signalling connection retry mechanismbit 1:1:SM disable PS Signalling connection retry mechanism",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:SM Enable Retry of PS Signaling Connection Establishment<BR>0:SM Disable Retry of PS Signaling Connection Establishment,,,__SM_DISABLE_PS_SIG_CONN_RETRY_TIMER__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6285,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_SO2_OPEN_GPS_EARLY,modem_sbp_config[52].SBP_SO2_OPEN_GPS_EARLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurepower on GPS earlybit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
-6286,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_SPRINT_MD1_ROAMING_CONTROL,modem_sbp_config[34].SBP_SPRINT_MD1_ROAMING_CONTROL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSPRINT MD1 Int. Voice roaming controlbit 0:0:Not Enabled, disable international Voice roaming control for Sprintbit 1:1:Enabled, enable international Voice roaming control for Sprint",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6287,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SRVCC_DRX_INC_GAP,modem_sbp_config[31].SBP_SRVCC_DRX_INC_GAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureuse LTE connected DRX period as measurement gapbit 0:0:Do not use LTE connected DRX period as measurement gapbit 1:1:Use LTE connected DRX period as measurement gap",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Use LTE connected DRX period as measurement gap<BR>0:Do not use LTE connected DRX period as measurement gap,,,"SBP_CMCC_SRVCC_CDRX_EHEN,SBP_SRVCC_STOP_UAS_MEAS, SBP_SRVCC_STOP_EAS_MEAS",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6288,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SRVCC_STOP_EAS_MEAS,modem_sbp_config[31].SBP_SRVCC_STOP_EAS_MEAS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature2G measurement priority is higher than 4G inter-freq when SRVCCbit 0:0:2G and 4G inter-frequency measurement have equal prioritybit 1:1:2G measurement priority is higher than 4G inter-frequency during VoLTE call on CMCC PLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:2G measurement priority is higher than 4G inter-frequency during VoLTE call on CMCC PLMN<BR>0:2G and 4G inter-frequency measurement have equal priority,,,"SBP_CMCC_SRVCC_CDRX_EHEN,SBP_SRVCC_STOP_UAS_MEAS,SBP_SRVCC_DRX_INC_GAP",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6289,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SRVCC_STOP_UAS_MEAS,modem_sbp_config[31].SBP_SRVCC_STOP_UAS_MEAS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuremake 2G measurement priority higher than 3G when SRVCCbit 0:0:2G and 3G measurement have equal prioritybit 1:1:2G measurement priority is higher than 3G during VoLTE call on CMCC PLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:2G measurement priority is higher than 3G during VoLTE call on CMCC PLMN<BR>0:2G and 3G measurement have equal prioritybit,,,"SBP_CMCC_SRVCC_CDRX_EHEN,SBP_SRVCC_DRX_INC_GAP,SBP_SRVCC_STOP_EAS_MEAS",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6290,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_STAR_SHORT_STRING_AS_CALL,modem_sbp_config[4].SBP_STAR_SHORT_STRING_AS_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureShort string is intended to be treated as CC operationbit 0:0:Short string should not be treated as CC operationbit 1:1:Short string is intended to be treated as CC operation",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,,Pass,,,,
-6291,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_1X_ADV_SUPPORT,modem_sbp_config[45].SBP_STATUS_1X_ADV_SUPPORT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureC2K 1xRTT advanced feature.bit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:the feature is closed pemanently,,,NA,1xRTT,3G,,,"The feature is disabled permanently, NO Need to Test",Untested,,,,
-6292,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_1X_PS_DELAY,modem_sbp_config[47].SBP_STATUS_1X_PS_DELAY,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature1X PS delay to establishbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6293,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_32K_LESS,modem_sbp_config[44].SBP_STATUS_32K_LESS,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. 32K LESS featurebit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,NA,MD Config,Modem - Customer Requirement,,,No need to test,Untested,,,,
-6294,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_ALTERNATE_PN,modem_sbp_config[44].SBP_STATUS_ALTERNATE_PN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. No needed after UMOLYA as this feature is discardedbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,This SBP was obsolete,,,,1xRTT,3G,,,This SBP was obsolete,Untested,,,,
-6295,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_BTSAP,modem_sbp_config[48].SBP_STATUS_BTSAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConnection of the BlueTooth SAP featurebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6296,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_C2KONLY_OOSA_RETRIEVE_OPTIMIZE,modem_sbp_config[48].SBP_STATUS_C2KONLY_OOSA_RETRIEVE_OPTIMIZE,Not Support,yes,yes,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureC2K Only OOSA retrieve optimizationbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0-1:int: 0-1,,,,IRAT(C2K-LTE),OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6297,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_CDG_AVOIDANCE,modem_sbp_config[50].SBP_STATUS_CDG_AVOIDANCE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCDG EVDO Channel Avoidance Featurebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6298,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_CDG_BSR,modem_sbp_config[50].SBP_STATUS_CDG_BSR,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCDG BSR (Better Service Reselection) Featurebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6299,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_CARDLOCK,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_CARDLOCK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSTATUS_CHINATELECOM_CARDLOCKbit 0:0:Not enabledbit 1:1:Enabled<BR>Obsolete. This SBP is not used anymore.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Obsolete. This SBP is not used anymore.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6300,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_EXTENSIONS,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_EXTENSIONS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureChinaTelecom related featuresbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not China Telecom SIM card inserted.<BR>1:China Telecom SIM card inserted.,,,,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
-6301,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_CO_CLOCK,modem_sbp_config[44].SBP_STATUS_CO_CLOCK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. The co clock feature.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,NA,Co-TSX,OP Requirement,,,No need to test,Untested,,,,
-6302,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_CT_AUTO_REG_WHEN_MCC_CHANGED,modem_sbp_config[49].SBP_STATUS_CT_AUTO_REG_WHEN_MCC_CHANGED,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAuto registration when MCC is changed.bit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6303,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_DO_APERSISTENCE_AVOID,modem_sbp_config[48].SBP_STATUS_DO_APERSISTENCE_AVOID,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurestore and use DO APERSISTENCEbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6304,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_STATUS_DO_IRAT_PRIORITY_DOWNGRADING,modem_sbp_config[53].SBP_STATUS_DO_IRAT_PRIORITY_DOWNGRADING,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. This SBP is not used anymorebit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,EVDO,3G,,,,Untested,,,,
-6305,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_STATUS_DO_PRL_LIST_ASSOCIATED_ONLY,modem_sbp_config[53].SBP_STATUS_DO_PRL_LIST_ASSOCIATED_ONLY,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDO only use those channels associated with 1Xbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6306,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_EXT_SMS_PB_INIT,modem_sbp_config[44].SBP_STATUS_EXT_SMS_PB_INIT,Not Support,no,no,no,yes,seldom used.<BR>Configuration of SBP FeatureRead SMS from SIM card while initialiaztion if def SYS_OPTION_NO_UI.<BR>0 not read while initialiaztion;<BR>1 read SMS from SIM card while initialiaztion.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If def SYS_OPTION_NO_UI, read SMS record from UIM when initialiaztion.",,,no,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6307,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_GMSS_MRU,modem_sbp_config[46].SBP_STATUS_GMSS_MRU,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureuse MRU setting from GMSSbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6308,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_HVOLTE,modem_sbp_config[48].SBP_STATUS_HVOLTE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresupport DAN/DCN in hVolte modebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Support<BR>0x00:Not Support,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6309,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_IDLE_GEO_LIST,modem_sbp_config[46].SBP_STATUS_IDLE_GEO_LIST,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurethe use of idle geo listbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6310,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_IPV6,modem_sbp_config[46].SBP_STATUS_IPV6,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureversion 6 of the Internet Protocol (IPv6) feature. 0 Not support IPv6bit ; 1 support IPv6",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,,MD Config,Modem - Customer Requirement,,,c2k IPv6 test.,Pass,,,,
-6311,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_LBS_DATA_LOGGING,modem_sbp_config[50].SBP_STATUS_LBS_DATA_LOGGING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresupports LBS data loggingbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support LBS logging.<BR>1:support LBS logging.,,,,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
-6312,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_MIP,modem_sbp_config[46].SBP_STATUS_MIP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIP Mobility Support or not. 0 Not Support Moblie IP feature; 1 Support Moblie IP feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,,MD Config,Modem - Customer Requirement,,,lab test: MIP case,Pass,,,,
-6313,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_MIP_DMU,modem_sbp_config[46].SBP_STATUS_MIP_DMU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureVerizon Wireless Dynamic Mobile IP Key Update procedure featurebit 0:0:Disable DMU for Moblie IP featurebit 1:1:Enable DMU for Moblie IP feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,,MD Config,Modem - Customer Requirement,,,lab test: MIP cases.,Pass,,,,
-6314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_MODEM_TURNON_AUTO,modem_sbp_config[44].SBP_STATUS_MODEM_TURNON_AUTO,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTurn on modem automatically when test modem without APbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6315,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_STATUS_POWERUP_1X_SCAN,modem_sbp_config[52].SBP_STATUS_POWERUP_1X_SCAN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature1x scan automatically after power onbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6316,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_STATUS_PS_REG_SRCH_IN_SAME_CYCLE_OPTI,modem_sbp_config[54].SBP_STATUS_PS_REG_SRCH_IN_SAME_CYCLE_OPTI,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureoptimisation of C2K scan during a MSPL search cyclebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SESSION_NEGO_OPTM_POWERON,modem_sbp_config[50].SBP_STATUS_SESSION_NEGO_OPTM_POWERON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresession restore without re-nego any protocol when power onbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] power on to EVDO camp on<BR>[Expected Result] EVDO camp on without session nego procedure,Pass,,,,
-6318,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SHDR_HYBRID,modem_sbp_config[45].SBP_STATUS_SHDR_HYBRID,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. SHDR HYBRID featurebit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-6319,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_STATUS_SHO_OPTIMIZATION,modem_sbp_config[79].SBP_STATUS_SHO_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether MS needs to reduce soft handoff times when good signalbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP, trigger a voice call by 1xRTT<BR>[Test Step] The signal strength of a neighbour cell greater than Tadd first and then less than Tadd<BR>[Expected Result] MS did not add this neighbour cell to Aset",Pass,,,,
-6320,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_SID_MAPPING_MCC,modem_sbp_config[49].SBP_STATUS_SID_MAPPING_MCC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureC2K 1xRTT use System ID to map MCC(Mobile Country Code), not use the MCC in Extend System Parameter Messagebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Vzw GMSS cases,Pass,,,,
-6321,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_SILENT_REDIAL_ON_SIB8,modem_sbp_config[47].SBP_STATUS_SILENT_REDIAL_ON_SIB8,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSilent Redial with SIB8 1xRTT collocation Frequency Brocadcast feature request by Vzw specbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6322,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_STATUS_SLC_INVALID_SECTORID_CHK,modem_sbp_config[43].SBP_STATUS_SLC_INVALID_SECTORID_CHK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurewhether the sector ID of EV-DO is to be checkedbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] set the subnetId to all zero, the power on ue on this evdo cell<BR>[Expected Result] EVDO could not camp on this subnetId invalid cell",Pass,,,,
-6323,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_SPRINT_1X_SYS_LOST,modem_sbp_config[49].SBP_STATUS_SPRINT_1X_SYS_LOST,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. No needed after UMOLYA as feature is opened without a SBP to controlbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,This SBP was obsolete,,,,1xRTT,3G,,,This SBP was obsolete,Untested,,,,
-6324,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_STATUS_SPRINT_AT_CMD,modem_sbp_config[51].SBP_STATUS_SPRINT_AT_CMD,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSprint required AT commandbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-1:int: 0-1,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6217,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_ROAMING_REJ_CAUSE_7_8_MAPPING_TO_15,modem_sbp_config[56].SBP_ROAMING_REJ_CAUSE_7_8_MAPPING_TO_15,OTA and OTA BY OP,no,no,no,yes,"For some operators, if the USIM card or its service package does not have LTE service, the network will reject UE's registration with reject cause #7 or #8. According to TS 24.301, UE will in no service in 2G, 3G, and 4G until power off or SIM removal. However, this kind of USIM card may have normal service in 2/3G.<BR>MTK provides workaround solution. If this SBP is enabled and UE receives reject cause #7 or #8 in roaming network (real network), UE will mapping to cause #15 and follow the #15 handling. In this way, UE at least can get normal service in 2G/3G. One more reminder is that this feature is only applied in real network and not applied if inserting test sim. Verifying reject cause #7 or #8 behavior is very common for IOT or GCF cases. To prevent the IOT/GCF cases failure, MTK will keep following the spec behavior if inserting test sim.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. AUTH reject mapping to cause #15 and follow #15 handling.<BR>0:Disable. Follow spec AUTH reject handling.,,,User could use compile option __LTE_REJ_7_8_MAPPING_TO_15__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6218,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_ROHC_COMPR_DECOMPR_TRACE,modem_sbp_config[72].SBP_ROHC_COMPR_DECOMPR_TRACE,OTA and OTA BY OP,no,no,no,yes,"For RJIL IOT test, PS intergrated with RoHC Compression and Decompression information are required for RJIL certification perspective.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): N<BR>Test Time (minutes): 5<BR><BR>[Init] <BR>Attach to LTE and IMS PDN is activated. VoLTE icon is available.<BR><BR>[Test Step] <BR>1. Start MO VoLTE call<BR><BR>[Expected Result]<BR>ROHC traces are outputted by MOD_ENPDCP in PS Integrated View. You can find the following traces.<BR><BR>[ENPDCP][UL][ROHC] DRB RoHC data compressed<BR>[ENPDCP][DL][ROHC] DRB RoHC data processed,Pass,,,,
+6219,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_RPLMN_HPLMN_COMBINED_SEARCH,modem_sbp_config[2].SBP_RPLMN_HPLMN_COMBINED_SEARCH,Not Support,no,no,no,yes,"This SBP is to allow searching HPLMN/RPLMN together during power-on/recover search, to speed up and camp back to HPLMN.<BR>If both SBP_RPLMN_HPLMN_COMBINED_SEARCH and SBP_MM_SEARCH_HPLMN_BEFORE_RPLMN are enabled, HPLMN will be searched first.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __RPLMN_HPLMN_COMBINED_SEARCH__.,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6220,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[41].SBP_RRC_CONN_REL_CAUSE_IND,modem_sbp_config[41].SBP_RRC_CONN_REL_CAUSE_IND,OTA and OTA BY OP,no,no,no,yes,This SKT Korea Requirement is to indicate the cause values received in RRC Connection Release to AP via URC,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. It means that UE forcefully releases the RR connection to initating rat mode change procedure to access stratum<BR>0:Disabled. It means that UE waits for RR connection to get released by network before initating rat mode change procedure to access stratum,,,"To enable this feature, compile option __MM_RRC_CONN_REL_CAUSE_IND__ must be defined",MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+6221,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_RRC_RECEIVING_SIB_IN_DCH_MODE,modem_sbp_config[22].SBP_RRC_RECEIVING_SIB_IN_DCH_MODE,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, UE supports receiving SIB in RRC state CELL_DCH.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6222,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[75].SBP_RTP_FLOW_USE_CID_0,modem_sbp_config[75].SBP_RTP_FLOW_USE_CID_0,OTA and OTA BY OP,no,no,no,yes,Always use RoHC Context with CID 0 for RTP flow.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes): 5<BR><BR>[Init] <BR>Attach to LTE and IMS PDN is activated. VoLTE icon is available.<BR>[Test Step] <BR>1. MO VoLTE call for 1 min<BR>2. MT VoLTE call for 1 min<BR>[Expected Result]<BR>ROHC uses cid 0 for handling ROHC RTP data. This can be found in L2 trace. E.g.,<BR><BR>[ROHC-D][PKT] (cid 0, profile_id 0x1, rb_idx 2) is matched",Pass,,,,
+6223,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[90].SBP_RTT_BAR_BAD_CELL,modem_sbp_config[90].SBP_RTT_BAR_BAD_CELL,OTA and OTA BY OP,no,no,no,yes,"This SBP describes the feature bar the bad cell when access max probe 3 times. Once declared a bad cell when accessing max probe 3 times, 1xRTT shall limit to stay on this sector when system reselection.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,none,Pass,,,,
+6224,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_SAT_NOTIFY_PLMN_BEFORE_READ_IMSI,modem_sbp_config[15].SBP_SAT_NOTIFY_PLMN_BEFORE_READ_IMSI,Not Support,no,no,no,yes,"This feature is designed for OP12 dual IMSI SIM card.<BR>As there are two IMSI to be used, SIM card needs to know the loaction information in order to provide the proper IMSI value. So with the feature enabled, the device will send OP12 formatted PLMN information(MCC/MNC) before it reads IMSI file from booting up, or when the PLMN information is changed.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,The setting of this SBP could be set to "enable" by defining compile option __SAT_NOTIFY_PLMN_BEFORE_READ_IMSI__ in the makefile,(VzW) Power-on and SIM Activation,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6225,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_SAT_NO_EVDL_IN_SESSION,modem_sbp_config[4].SBP_SAT_NO_EVDL_IN_SESSION,Not Support,no,no,no,yes,"With this SBP feature enabled, the device will not send Event Download to SIM card if there is any monitored event during SAT session. Device will send the Event Download at the end of SAT session.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is controlled by __SAT_NO_EVDL_IN_SESSION__.,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6226,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_SAT_OP20_PEND_REFRESH_WHEN_OTA,modem_sbp_config[71].SBP_SAT_OP20_PEND_REFRESH_WHEN_OTA,Not Support,no,no,no,yes,"With the option on, and if the device is connected to OP20 ota APN "otasn", it will delay the execution of REFRESH command at most 30 second.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6227,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_SAT_PROVIDE_PS_LOCAL_INFO,modem_sbp_config[7].SBP_SAT_PROVIDE_PS_LOCAL_INFO,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+6228,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[30].SBP_SAT_READ_PNN_ON_REFRESH,modem_sbp_config[30].SBP_SAT_READ_PNN_ON_REFRESH,Not Support,no,no,no,yes,"With the feature is enalbed, the device will additionally perform read EF_PNN(PLMN Network Name) on executing REFRESH command.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is originally controlled by __SAT_READ_PNN_ON_REFRESH__.,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6229,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_SAT_REFRESH_DATA_POLICY_VALID_ON_VOICE_CALL,modem_sbp_config[93].SBP_SAT_REFRESH_DATA_POLICY_VALID_ON_VOICE_CALL,Not Support,no,no,no,yes,"This feature is to apply the REFRESH enforcement policy - Data Call on a voice call. If the feature is turned on, when the device receives a REFRESH with DATA enforcement policy set under a voice call, it will also proceed the command immediately.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6230,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_SAT_REISSUE_REFRESH_AFTER_CALL_END,modem_sbp_config[8].SBP_SAT_REISSUE_REFRESH_AFTER_CALL_END,Not Support,no,no,no,yes,"The device will directly response TERMINAL RESPONSE("busy on call") when receiving REFRESH during a call. However, with this SBP feature enabled, the device will re-issue the command at the end of the call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If the REFRESH command is type:"UICC RESET", it will be firstly controlled by SBP_ALLOW_SIM_REFRESH_RESET_WHEN_IN_CALL.The setting of this SBP could be set to "enable" by defining __SAT_REISSUE_REFRESH_AFTER_CALL_END__ in the makefile.",SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6231,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_AFTER_SMS_ACK,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_AFTER_SMS_ACK,Not Support,no,no,no,yes,"With the feature is enalbed, the device will directly response TERMINAL RESPONSE("busy on call") when receiving REFRESH before the end of SMS session and after performing SMS PP Download.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If the REFRESH command is type:"UICC RESET", it will be firstly controlled by SBP_ALLOW_SIM_REFRESH_RESET_WHEN_IN_CALL.The setting of this SBP could be set to "enable" by defining compile option __SBP_SMS_PERMISSION_TO_ISSUE_REFRESH__ in the makefile",SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6232,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_WHEN_UE_IDLE_AFTER_CALL_END,modem_sbp_config[23].SBP_SAT_REISSUE_REFRESH_WHEN_UE_IDLE_AFTER_CALL_END,Not Support,no,no,no,yes,"With the feature enabled, the device will only re-issue UICC RESET or NAA Session RESET type of REFRESH command when UE enters in IDLE mode after the call end.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"To enable this feature, SBP_SAT_REISSUE_REFRESH_AFTER_CALL_END also must be enabled.<BR>The setting of this SBP could be set to "enable" by defining compile option __SBP_REISSUE_REFRESH_AFTER_IDLE_MODE__ in the makefile",SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6233,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_SAT_SPRINT_IMEI_LOCK_WITHOUT_SIM_RECOVERY,modem_sbp_config[32].SBP_SAT_SPRINT_IMEI_LOCK_WITHOUT_SIM_RECOVERY,Not Support,no,no,no,yes,"With the feature is enabled, the device will not perform recovery procedure if SIM card is locked by Sprint lock mechanism.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6234,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[80].SBP_SAT_UICC_RESET_AFTER_REFRESH_FAILS,modem_sbp_config[80].SBP_SAT_UICC_RESET_AFTER_REFRESH_FAILS,Not Support,no,no,no,yes,"With this feature enabled, device will silently reset the UICC after we fail to perform REFRESH for 3 times.<BR>Note that we consider the following result causes as normal and count others as fail:<BR>- 0x00: Command performed successfully<BR>- 0x03: REFRESH performed with additional EFs read<BR>- 0x04: Command performed successfully, but requested icon could not be displayed<BR>- 0x08: REFRESH performed but indicated NAA was not active<BR>- 0x20 0x02: Terminal currently unable to process command - terminal currently busy on call",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6235,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_SAT_USSD_INFORM_USER_WHEN_NO_ALPHA_ID,modem_sbp_config[94].SBP_SAT_USSD_INFORM_USER_WHEN_NO_ALPHA_ID,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether to enable inform user when no alpha id present.<BR>If this feature is enabled, user is informed about USSD when no alpha id present<BR>If this feature is disabled,user is not informed about USSD when no alpha id present",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6236,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_SAT_USSD_NOT_INFORM_USER,modem_sbp_config[28].SBP_SAT_USSD_NOT_INFORM_USER,OTA and OTA BY OP,no,no,no,yes,"According to TS 31.111 Subclause 6.4.12 SEND USSD:<BR>if alpha_id is present and not NULL object, we should inform user about this SAT USSD While some SIM card may use DISPLAY_TEXT to tell user the SAT USSD result even when "alpha_id is present and no NULL object". In this case, there might be 2 dialog telling the USSD result : one from network, another one from SAT DISPLAY_TEXT.<BR>This SBP feature is used to disable the SAT USSD result indication from network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6237,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_SAT_ZERO_POLICY_WAIT_FOR_CALL,modem_sbp_config[71].SBP_SAT_ZERO_POLICY_WAIT_FOR_CALL,Not Support,no,no,no,yes,"If "refresh on call" and "refresh on data call" are both not set, and there is a call ongoing, the device will not perform the REFRESH command and directly send TR with "busy on call". However, with the feature option on, the device will wait for the call end and then perform REFRESH normally.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,SIM Refresh,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6238,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_SAVE_T3402_IN_NVRAM,modem_sbp_config[40].SBP_SAVE_T3402_IN_NVRAM,OTA and OTA BY OP,no,no,no,yes,"For some NW, it may expected that UE shall start T3402 with the value last time assign to UE even if UE experience power off and power on.<BR>MTK provides a solution controled by this SBP. If this SBP is enabled, UE will store the T3402 value and the PLMN to NVRAM when power off. After UE power on again, UE will read the T3402 value and the PLMN from NVRAM. If current PLMN UE camped on is the PLMN in NVRAM, UE will apply the T3402 value that readed from NVRAM. Otherwise, UE will apply the default value as the T3402 value. According to TS24.301 10.2, the default T3402 value is 12 minutes.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will store the T3402 value when power off and UE can use the value later after power on again.<BR>0:Disable. UE will use the T3402 as default value as TS24.301 required.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6239,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SCA_CONFIGURED_BY_CUSTOMER,modem_sbp_config[31].SBP_SCA_CONFIGURED_BY_CUSTOMER,OTA and OTA BY OP,no,no,no,yes,This feature can configure that SCA (Service Center Address) can be configured by customer in customer file.<BR>If the SCA is not present in the EFsmsp then sending SMS is not possible. This feature allows UE to use the SCA from the custom file if the EFsmsp doesn't have the SCA. The custom file(custom_sms_config.c) can be modified by the customer.Custom File contains a mapping between the HPLMN ID and SCA.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,N/A,,,,,,Pass,,,,
+6240,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[10].SBP_SCC_T3396_REMAINS_WHEN_PLMN_CHANGE,modem_sbp_config[10].SBP_SCC_T3396_REMAINS_WHEN_PLMN_CHANGE,OTA and OTA BY OP,no,no,no,yes,"According to spec TS 24.301 and TS 24.008, T3396 shall keep running even when the UE registers to another PLMN. However, in some operator's requirement, T3396 is required to be stopped when the UE registers to another PLMN. If SBP_SCC_T3396_REMAINS_WHEN_PLMN_CHANGE is on, the UE will follow the spec and keep T3396 running upon PLMN change; otherwise, T3396 will stop upon PLMN change.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6241,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_2G,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_2G,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6242,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_3G,modem_sbp_config[13].SBP_SDM_ALWAYS_CS_WHEN_3G,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6243,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_DISABLE_SMS_OVER_SGS,modem_sbp_config[14].SBP_SDM_DISABLE_SMS_OVER_SGS,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6244,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_SDM_DISABLE_SMS_OVER_WIFI,modem_sbp_config[32].SBP_SDM_DISABLE_SMS_OVER_WIFI,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6245,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[32].SBP_SDM_IMS_SMART_CONGESTION_REPORT_TO_AP,modem_sbp_config[32].SBP_SDM_IMS_SMART_CONGESTION_REPORT_TO_AP,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6246,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_PREFER_SMS_OVER_SGS_TO_IMS,modem_sbp_config[14].SBP_SDM_PREFER_SMS_OVER_SGS_TO_IMS,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6247,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_SDM_RETRY_CS_DOMAIN_WHEN_IMS_TR1M_EXPIRY,modem_sbp_config[29].SBP_SDM_RETRY_CS_DOMAIN_WHEN_IMS_TR1M_EXPIRY,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6248,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_RETRY_CS_WHEN_IMS_SEND_FAIL,modem_sbp_config[14].SBP_SDM_RETRY_CS_WHEN_IMS_SEND_FAIL,Not Support,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6249,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_SDM_RETRY_IMS_WHEN_CS_SEND_FAIL,modem_sbp_config[13].SBP_SDM_RETRY_IMS_WHEN_CS_SEND_FAIL,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6250,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_SDM_RETRY_IMS_WHEN_IMS_SEND_FAIL,modem_sbp_config[24].SBP_SDM_RETRY_IMS_WHEN_IMS_SEND_FAIL,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6251,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[14].SBP_SDM_TRY_CS_WHEN_2G_VOICE_CALL,modem_sbp_config[14].SBP_SDM_TRY_CS_WHEN_2G_VOICE_CALL,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6252,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[40].SBP_SEARCH_23G_FOR_AC_BARRED_MO_CSFB,modem_sbp_config[40].SBP_SEARCH_23G_FOR_AC_BARRED_MO_CSFB,OTA and OTA BY OP,no,no,no,yes,"In some regions, network is ac barred for CSFB, and it causes MO CSFB failed in high probability. This SBP is to force select 2/3G to process the CS service when network is ac barred for CSFB. Although UE's behavior violates Spec 24.301, but it can enhance the probability to make MO call successfully in such scenario.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will force select 2/3G to process the CS service when network is ac barred for CSFB<BR>0:Disabled. UE will not force select 2/3G to process the CS service when network is ac barred for CSFB,,,User could use compile option __EMM_SEARCH_23G_FOR_AC_BARRED_MO_CSFB__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6253,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_SEARCH_4G_WHEN_FIRST_PS_ATTACH,modem_sbp_config[20].SBP_SEARCH_4G_WHEN_FIRST_PS_ATTACH,Not Support,no,no,no,yes,"This SBP is for MMS-sent test case, or the scenario that the user switches data service between two SIMs. NWSEL might try to search 4G without interrupting current connection.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6254,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_SEARCH_AVAILABLE_PLMN_IMMEDIATELY,modem_sbp_config[20].SBP_SEARCH_AVAILABLE_PLMN_IMMEDIATELY,OTA and OTA BY OP,no,no,no,yes,"When fast roaming is enabled, lower layer will report the found PLMNs during fullband search. When the SBP is on, UE will search that found PLMN immediately without consideration of whether the found PLMN is the highest priority VPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __SEARCH_AVAILABLE_PLMN_IMMEDIATELY__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6255,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_SEARCH_LTE_FIRST_EVEN_NO_ACT_IN_SIM,modem_sbp_config[95].SBP_SEARCH_LTE_FIRST_EVEN_NO_ACT_IN_SIM,OTA and OTA BY OP,no,no,no,yes,NWSEL will search LTE first even there is no LTE ACT in SIM,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6256,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_SEARCH_LTE_ON_T3402_EXPIRY,modem_sbp_config[71].SBP_SEARCH_LTE_ON_T3402_EXPIRY,OTA and OTA BY OP,no,no,no,yes,NWSEL will search LTE to get normal service quickly after T3402 or abnormal RAI timer timeout.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This SBP can be controlled by compile option __SEARCH_LTE_ON_T3402_EXPIRY__,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6257,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[20].SBP_SEARCH_NOT_PREFERRED_AVAILABLE_PLMN,modem_sbp_config[20].SBP_SEARCH_NOT_PREFERRED_AVAILABLE_PLMN,OTA and OTA BY OP,no,no,no,yes,"With fast roaming feature, if there is no preferred network in this country, all networks in this country can be searched first. No need to wait fullband result to confirm no other higher priority network. This optimization assumes that the user favors national wide roaming priority over international border priority. Turn-on this option might result in priority inverse for border scenario.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"To disable this feature,we could use compile option __DISABLE_SEARCH_NOT_PREFERRED_AVAILABLE_PLMN__to let the setting of this SBP be disable by default.",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6258,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_SEARCH_NR_FIRST_EVEN_NO_ACT_IN_SIM,modem_sbp_config[95].SBP_SEARCH_NR_FIRST_EVEN_NO_ACT_IN_SIM,OTA and OTA BY OP,no,no,no,yes,NWSEL will search NR first even there is no NR ACT in SIM,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6259,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[67].SBP_SEARCH_TARGET_RAT_ONLY_FOR_MANUAL_SEARCH,modem_sbp_config[67].SBP_SEARCH_TARGET_RAT_ONLY_FOR_MANUAL_SEARCH,OTA and OTA BY OP,no,no,no,yes,"If the SBP is off, UE will treat the target RAT selected on the UI as the prefer RAT. If UE fails to register target RAT, UE still try to search and register on other RATs.<BR>If the SBP is on, UE will search target RAT only and do not search other RATs.",BIT,1,,1,DEFAULT_VALUE :0 <BR>__SEARCH_TARGET_RAT_ONLY_FOR_MANUAL_SEARCH__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __SEARCH_TARGET_RAT_ONLY_FOR_MANUAL_SEARCH__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6260,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_SEARCH_THIS_RAT_HIGHEST_NETWORK,modem_sbp_config[29].SBP_SEARCH_THIS_RAT_HIGHEST_NETWORK,Not Support,no,no,no,yes,"For fast roaming special optimization, if current found network is the highest priority network of current RAT. Search it immediately to speed up camp-on.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __SEARCH_THIS_RAT_HIGHEST_NETWORK__.,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6261,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_SEARCH_WHEN_RUDE_WAKEUP,modem_sbp_config[42].SBP_SEARCH_WHEN_RUDE_WAKEUP,OTA,no,no,no,yes,"This SBP will enable the feature of Rude wake up of Recovery search, when screen is turned ON and Modem was in Limited or No-service.",BIT,1,,1,DEFAULT_VALUE :0 <BR>__SEARCH_WHEN_RUDE_WAKEUP__ : 1,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
+6262,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_SEL_AUTO_MODE_FROM_MANUAL_MODE_IF_REFRESH_TYPE_RESET,modem_sbp_config[42].SBP_SEL_AUTO_MODE_FROM_MANUAL_MODE_IF_REFRESH_TYPE_RESET,OTA,no,no,no,yes,This SBP feature is to change PLMN selection mode from Manual mode to Automatic mode when SIM reset.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,"Trigger SIM refresh and perform manual selection, check whether UE can behave normally",Pass,,,,
+6263,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_SEND_NW_REG_REJ_CAUSE_IND,modem_sbp_config[70].SBP_SEND_NW_REG_REJ_CAUSE_IND,OTA and OTA BY OP,no,no,no,yes,"For some customer, they may need modem to report the network reject cause to upper layer(AP). If this SBP is on, NAS will report the network reject cause to upper layer.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This SBP can be controlled by compile option __SEND_NW_REG_REJ_CAUSE_IND__,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6264,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING,modem_sbp_config[35].SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING,OTA and OTA BY OP,no,no,no,yes,"If PCO are provieded, UE will transfered it using ESM information procedure as TS24.301 illustrated. By turning on SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING, PCO will be seperated into plain and cipher parts. The plain part will be transferred in Inital Attach PDN Connectivity Request. And the cipher part will be transferred using ESM information procedure. Note that APN will be transfered using ESM information procedure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,"if enablng compile option __SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING__, SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING will be turned on also.",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>enablng compile option __SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING__<BR>[Test Step]<BR>UE initial attach PDN connectivity request to network<BR>[Expected Result]<BR>If PCO are provieded, UE will transfered it using ESM information procedure as TS24.301 illustrated. By turning on SBP_SEPARATE_PCO_IN_LTE_FOR_CIPHERING, PCO will be seperated into plain and cipher parts. The plain part will be transferred in Inital Attach PDN Connectivity Request. And the cipher part will be transferred using ESM information procedure. Note that APN will be transfered using ESM information procedure.",Pass,,,,
+6265,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_SESSION_CONGESTION_CONTROL_SUPPORT,modem_sbp_config[38].SBP_SESSION_CONGESTION_CONTROL_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"The SBP is related to the session management level congestion control feature as specified in TS 24.301 for ESM and TS 24.008 for SM. Depending on the received SM/ESM reject causes during an SM/ESM procedure (e.g., PDN establishment procedure), the UE may start a T3396/back-off timer to block subsequent retries. <BR>In UMOLYA, the UE supports R12 session management level congestion control mechanism, including the handling of APN based congestion control and the handling of network rejection not due to APN based congestion control. In our implementation, such a back-off mechanism is controlled by this SBP: When this SBP is on, T3396/back-off timer will be applied and local rejections may be executed according to spec definitions; When this SBP is off, UE will ignore the T3396/back-off timer and thus no any local rejections will be performed.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6266,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[66].SBP_SET_AS_REL_R9_IN_CHINA,modem_sbp_config[66].SBP_SET_AS_REL_R9_IN_CHINA,OTA and OTA BY OP,no,no,no,yes,"Fallback LTE AS Release to Rel9 when CA is disabled in China.<BR>- China Communications Standards Association(CCSA) has announced that UE with LTE AS release R10(or higher) should support CA, that is, UE without CA cannot report LTE AS release with R10(or higher)",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled<BR>0:disabled,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR>Test Time (minutes) : 10<BR>[Init] set UE CA capability disabled, CMCC SIM inserted<BR>[Test Step] <BR>1. camp on CMCC network<BR>[Expected Result] <BR>check the reported AS release value for SBP in & off",Pass,,,,
+6267,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_SET_FOLLOW_ON_REQUEST_FOR_IMS_PDP,modem_sbp_config[23].SBP_SET_FOLLOW_ON_REQUEST_FOR_IMS_PDP,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, UE shall set FOR(follow-on request) bit in RAU procedure if PDP context status contains IMS PDP.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If this SBP is enabled, UE shall set FOR( follow-on request) bit in RAU procedure if PDP context status contains IMS PDP.",,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6268,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_SET_FOR_BIT_IN_ATTACH_RAU_WHEN_DATA_ENABLED,modem_sbp_config[77].SBP_SET_FOR_BIT_IN_ATTACH_RAU_WHEN_DATA_ENABLED,OTA and OTA BY OP,no,no,no,yes,Set FOR bit in GMM ATTACH or RAU when data enabled and PDP activation will follow.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Disable<BR>0x01:Enable,,,"if compile option __SBP_ENABLE_SET_FOR_BIT_IN_ATTACH_RAU_WHEN_DATA_ENABLED__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6269,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_SET_MS_NW_CAPA_TO_DEFAULT_SIZE,modem_sbp_config[99].SBP_SET_MS_NW_CAPA_TO_DEFAULT_SIZE,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled will include EPC support status bit in MS_NETWORK_CAPABILITY IE (Byte_3) in GMM_ATTACH_REQ and GMM_ROUTING_AREA_REQUEST messages on test SIM and UE RAT_MODE setting does not contain LTE support.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Byte_3 of MS_NETWORK_CAPABILITY is included in GMM_ATTACH_REQ and RAU_REQ when test SIM is inserted and RAT_MODE does not support LTE<BR>0:Byte_3 of MS_NETWORK_CAPABILITY is not included in GMM_ATTACH_REQ and RAU_REQ when test SIM is inserted and RAT_MODE does not support LTE,,,This feature is controlled by __SET_MS_NW_CAPA_TO_DEFAULT_SIZE__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (minutes) 10<BR>[Init]<BR>Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated<BR>[Test Step] <BR>Perform registration in 3G<BR>[Expected Result] <BR>EPC support sttus bit in MS_NETWORK_CAPABILITY_IE ( Byte_3)",Pass,,,,
+6270,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_SET_RAT_MODE_LTE_ONLY,modem_sbp_config[85].SBP_SET_RAT_MODE_LTE_ONLY,OTA and OTA BY OP,no,no,no,yes,Set rat mode to LTE only for specific operator,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,"Plug in CT card. rat mode set to non C2K only mode(ex: LWG).<BR>After enabling the SBP, rat mode should be locked at LTE.",Pass,,,,
+6271,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[62].SBP_SHORT_T3417EXT,modem_sbp_config[62].SBP_SHORT_T3417EXT,OTA and OTA BY OP,no,no,no,yes,"For some NWs, NW does not release RRC connection with redirect info before T3417EXT expires. As a result, UE wait for T3417EXT expire to select 2G/3G. NW may release the call since it did not receive paging response for a long time, which leads to CS call fails. To improve CS performance in such abnormal networks, shorten T3417EXT to 4 secs to make UE search 2G/3G more quickly.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Set short T3417EXT for specific opearator.<BR>0:Disable. Don't Set short T3417EXT for specific opearator.,,,User could use compile option __SHORT_T3417EXT__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6272,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_SIM_BLOCK_AT_CSIM,modem_sbp_config[99].SBP_SIM_BLOCK_AT_CSIM,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether to disable SIM apdu access AT commands CSIM .<BR>If this feature is enabled, SIM apdu access AT commands CSIM are blocked<BR>If this feature is disabled,SIM apdu access AT commands CSIM are not blocked",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6273,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_SIM_DETECTION_ENHANCE_MODE,modem_sbp_config[56].SBP_SIM_DETECTION_ENHANCE_MODE,OTA and OTA BY OP,no,no,no,yes,"During UICC application detection, skip card reset for USIM/CSIM/ISIM. But SIM/RUIM still triggers card reset.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6274,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[102].SBP_SIM_EUICC_SUPPORT,modem_sbp_config[102].SBP_SIM_EUICC_SUPPORT,OTA,no,no,no,yes,Modem supports eUICC as GSMA SGP.22.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6275,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[64].SBP_SIM_FAST_RECOVERY_REPORT,modem_sbp_config[64].SBP_SIM_FAST_RECOVERY_REPORT,OTA,no,no,no,yes,Send URC when SIM fast recovery starts (+ESIMS: 23) as well as SIM fast recovery succeeds (+ESIMS: 24) if AP needs to count fast recovery.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __SIM_FAST_RECOVERY_REPORT__,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6276,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[92].SBP_SIM_UPDATE_RPM_VER,modem_sbp_config[92].SBP_SIM_UPDATE_RPM_VER,Not Support,no,no,no,yes,"With the option on, device will update EF RPM Version Implemented during SIM power on process.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6277,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_SKIP_POWER_SCAN_4G2_CSFB_REDIRECTION,modem_sbp_config[94].SBP_SKIP_POWER_SCAN_4G2_CSFB_REDIRECTION,OTA and OTA BY OP,no,no,no,yes,Do not do Power scan when 4G2 CSFB Redirection fails to find cell from stored and redirection list. This will provide more time for other RAT to camp.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Will not trigger any power scan to find a cell.<BR>0:Power scan will be triggred to find a cell.,,,"if compile option __SKIP_POWER_SCAN_4G2_CSFB_REDIRECTION__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6278,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[56].SBP_SKIP_VDP_IE_IN_ATTACH_TAU_REQ,modem_sbp_config[56].SBP_SKIP_VDP_IE_IN_ATTACH_TAU_REQ,OTA and OTA BY OP,no,no,no,yes,"For some type of device, it may expected not include the Voice_Domin_Preference_and_UE's_Usage_Setting IE in ATTACH and TAU request.<BR>MTK provides a workaround solution. If this SBP is enabled, UE will not include the Voice_Domin_Preference_and_UE's_Usage_Setting IE in ATTACH and TAU request.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Do not include the VDP IE in ATTACH and TAU request.<BR>0:Disable. Follow spec handling.,,,User could use compile option __SKIP_VDP_IE_IN_ATTACH_TAU_REQ__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6279,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[15].SBP_SLT,modem_sbp_config[15].SBP_SLT,Not Support,no,no,no,yes,System level test for internal use.<BR>UE will search 4G then 3G then 2G for 1 round for SLT.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Untested,,,,
+6280,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[103].SBP_SMART_RELEASE,modem_sbp_config[103].SBP_SMART_RELEASE,OTA and OTA BY OP,no,no,no,yes,"NAS_SV will trigger Trick release for PLMN list. If trick release is fail, then NAS_SV will try local release.<BR>NAS_SV starts a timer to wait for the response of trick release. If timeout with no response, then the trick release is fail.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,__SBP_SMART_RELEASE__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6281,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_KT,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_KT,OTA and OTA BY OP,no,no,no,yes,This SBP is used to enable/disable SMS related customizations for KT operator. We have customizations for<BR>1. SMS Retry Count<BR>2. SMS Retry timer values at different layers<BR>3. SMS Domain Seletcion scheme<BR>4. SMS Retry scheme,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,N/A,,,,,,Pass,,,,
+6282,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_LGU,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_LGU,OTA and OTA BY OP,no,no,no,yes,This SBP is used to enable/disable SMS related customizations for LGU operator. We have customizations for<BR>1. SMS Retry Count<BR>2. SMS Retry timer values at different layers<BR>3. SMS Domain Seletcion scheme<BR>4. SMS Retry scheme,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"[0,1]",,,N/A,,,,,,Pass,,,,
+6283,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_SKT,modem_sbp_config[43].SBP_SMS_SETTINGS_FOR_SKT,OTA and OTA BY OP,no,no,no,yes,This SBP is used to enable/disable SMS related customizations for SKT operator. We have customizations for<BR>1. SMS Retry Count<BR>2. SMS Retry timer values at different layers<BR>3. SMS Domain Seletcion scheme<BR>4. SMS Retry scheme,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,N/A,,,,,,Pass,,,,
+6284,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_SM_DISABLE_PS_SIG_CONN_RETRY_TIMER,modem_sbp_config[25].SBP_SM_DISABLE_PS_SIG_CONN_RETRY_TIMER,OTA and OTA BY OP,no,no,no,yes,"When GMM(GPRS Mobility Management) layer failed to establish PS signaling connection for SM(Session Management) signaling, This feature is used to disable the retry of PS signaling connection re-establishment mechanism of SM(Session Management)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:SM Enable Retry of PS Signaling Connection Establishment<BR>0:SM Disable Retry of PS Signaling Connection Establishment,,,"To enable this feature, compile option __SM_DISABLE_PS_SIG_CONN_RETRY_TIMER__ must be defined",MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6285,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_SO2_OPEN_GPS_EARLY,modem_sbp_config[52].SBP_SO2_OPEN_GPS_EARLY,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether MS supports ower on GPS early or not. Modem power on GPS early in lab test, which is for Service Option 2 only.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
+6286,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_SPRINT_MD1_ROAMING_CONTROL,modem_sbp_config[34].SBP_SPRINT_MD1_ROAMING_CONTROL,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to enable international roaming control for Sprint. When this SBP is enabled and Sprint SIM is inserted, UE will not register on the roaming PLMN if the user set international voice roaming to NOT support.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6287,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SRVCC_DRX_INC_GAP,modem_sbp_config[31].SBP_SRVCC_DRX_INC_GAP,OTA and OTA BY OP,no,no,no,yes,"This SBP controls one of the SRVCC enhancement on CMCC:<BR>- When SBP enable,notify EL2 to use LTE connected DRX period as measurement gap.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Use LTE connected DRX period as measurement gap<BR>0:Do not use LTE connected DRX period as measurement gap,,,"SBP_CMCC_SRVCC_CDRX_EHEN, SBP_SRVCC_STOP_UAS_MEAS, SBP_SRVCC_DRX_INC_GAP,and SBP_SRVCC_STOP_EAS_MEAS should be enabled at the same time.",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6288,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SRVCC_STOP_EAS_MEAS,modem_sbp_config[31].SBP_SRVCC_STOP_EAS_MEAS,OTA and OTA BY OP,no,no,no,yes,"This SBP controls one of the SRVCC enhancement on CMCC:<BR>- When SBP enable,make 2G measurement priority is higher than 4G inter-frequency during VoLTE call on CMCC.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:2G measurement priority is higher than 4G inter-frequency during VoLTE call on CMCC PLMN<BR>0:2G and 4G inter-frequency measurement have equal priority,,,"SBP_CMCC_SRVCC_CDRX_EHEN, SBP_SRVCC_STOP_UAS_MEAS, SBP_SRVCC_DRX_INC_GAP,and SBP_SRVCC_STOP_EAS_MEAS should be enabled at the same time.",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6289,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[31].SBP_SRVCC_STOP_UAS_MEAS,modem_sbp_config[31].SBP_SRVCC_STOP_UAS_MEAS,OTA and OTA BY OP,no,no,no,yes,"This SBP controls one of the SRVCC enhancement on CMCC:<BR>- As SBP enable,make 2G measurement priority is higher than 3G during VoLTE call.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:2G measurement priority is higher than 3G during VoLTE call on CMCC PLMN<BR>0:2G and 3G measurement have equal prioritybit,,,"SBP_CMCC_SRVCC_CDRX_EHEN, SBP_SRVCC_STOP_UAS_MEAS, SBP_SRVCC_DRX_INC_GAP,and SBP_SRVCC_STOP_EAS_MEAS should be enabled at the same time.",MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6290,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_STAR_SHORT_STRING_AS_CALL,modem_sbp_config[4].SBP_STAR_SHORT_STRING_AS_CALL,OTA and OTA BY OP,no,no,no,yes,"Support short call number(two digits) with prefix * character (*1,*2,...,*9).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,The configuration of this SBP could be enabled by defining the compile option __STAR_SHORT_STRING_AS_CALL__,,,,,,Pass,,,,
+6291,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_1X_ADV_SUPPORT,modem_sbp_config[45].SBP_STATUS_1X_ADV_SUPPORT,Not Support,no,no,no,yes,This SBP describes the feature whether the 1xRTT advanced is enabled or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:the feature is closed pemanently,,,N/A,1xRTT,3G,,,"The feature is disabled permanently, NO Need to Test",Untested,,,,
+6292,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_1X_PS_DELAY,modem_sbp_config[47].SBP_STATUS_1X_PS_DELAY,Not Support,no,no,no,yes,1X ps speed is slow and not recommended to establish ps data on it. VZW spec require 1X PS is delayed to establish to wait for LTE/DO is acquired when power on or system lost. but other operators don't have this obvious requirement So this SBP is used to control whether 1x PS is delayed to establish PS service.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6293,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_32K_LESS,modem_sbp_config[44].SBP_STATUS_32K_LESS,Not Support,no,no,no,yes,This SBP describes the feature of 32K less.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,N/A,MD Config,Modem - Customer Requirement,,,No need to test,Untested,,,,
+6294,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_ALTERNATE_PN,modem_sbp_config[44].SBP_STATUS_ALTERNATE_PN,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,This SBP was obsolete,,,,1xRTT,3G,,,This SBP was obsolete,Untested,,,,
+6295,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_BTSAP,modem_sbp_config[48].SBP_STATUS_BTSAP,OTA and OTA BY OP,no,no,no,yes,This SBP describes the feature whether the connection of the BlueTooth SAP feature is enabled or not.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6296,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_C2KONLY_OOSA_RETRIEVE_OPTIMIZE,modem_sbp_config[48].SBP_STATUS_C2KONLY_OOSA_RETRIEVE_OPTIMIZE,Not Support,yes,yes,no,yes,"When IRAT modem switch procedure, this feature will enhance system select performance when retrieve from OOSA<BR>If this feature is enabled:<BR>- C2K modem will perform OOSA retrieve optimization which will enhance system select of IRAT modem switch procedure.<BR>- In high speed railway, the system select performance will improve. <BR>- If C2K system has service before but lost then,will keep c2k active to search for 8 cycles before be powered off to search other RATs.<BR>If this feature is disabled, if C2K system has service before but lost then,C2K will be powered off soon and to search other RATs and maybe will take more time to camp on.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0-1:int: 0-1,,,N/A,IRAT(C2K-LTE),OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6297,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_CDG_AVOIDANCE,modem_sbp_config[50].SBP_STATUS_CDG_AVOIDANCE,Not Support,no,no,no,yes,"This is CDMA CDG EVDO channel avoidance feature.<BR>If this feature is enabled, UE avoids to seach some DO channel in the following scenario: <BR>Channel which session negotiation fails (reasons are Authentication, Billing, UTAI Failure, etc.);<BR>- Channel which session negotiation timeouts (reasons are TCA timeout, RTCAck timeout);<BR>- Channel which access attempt fails (reasons are Authentication, Billing, Network-Busy, Gereral, Persistence Test Failure);<BR>- Channel which access attempt timeouts (reasons are TCA timeout, RTCAck timeout);<BR>- Channel which consectutive lost occurs;<BR>- The original channal over which the redirection was received after acquistion failure on all redirected channels.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6298,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_CDG_BSR,modem_sbp_config[50].SBP_STATUS_CDG_BSR,Not Support,no,no,no,yes,"This is CDMA CDG BSR feature.<BR>If this feature is enabled, user gets better DO data experienece if there is only less preferred system and worse experience if there is a most preferred system.<BR>If this feature is enabled:<BR>- If MS fails to acquire better service after GSRDM redirection to not the most preferred system, it shall go back and reacquire the original system from which it got redirected.<BR>- MS shall not perform BSR immediately after transitioning back to DO Idle from DO Connected state. T_dbsr_hold timer is started for this purpose.<BR>- MS shall not perform BSR immediately upon end of user originated DO call on a less preferred system. T_dbsr_call timer is started for this purpose.<BR>- MS shall search for periodic better DO service if one of T_dbsr, T_dbsr_hold, T_dbsr_call is expired and the other two timers are not running.<BR>If this feature is not enabled:<BR>- If MS fails to acquire better service after GSRDM redirection to a less preferred system, it shall go back and reacquire the redirected system.<BR>- MS shall perform BSR immediately after transitioning back to DO Idle from DO Connected state if T_dbsr is expired.<BR>- MS shall perform BSR immediately upon end of user originated DO call on a less preferred system if T_dbsr is expired.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6299,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_CARDLOCK,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_CARDLOCK,Not Support,no,no,no,yes,"restrict the UE work with only China Telecom's SIM card. if this feature is enabled, UE can only with Chian Telecom's SIM card, for the other SIM card, UE can only provide limited service, if this feature is disabled,UE can work with any card, no restricted by the Chian Telecom's card.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Obsolete. This SBP is not used anymore.,,,This feature is available in UMOLYA/LR12A and branches after them.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6300,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_EXTENSIONS,modem_sbp_config[44].SBP_STATUS_CHINATELECOM_EXTENSIONS,OTA and OTA BY OP,no,no,no,yes,This SBP describes the feature of switch for ChinaTelecom related features.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not China Telecom SIM card inserted.<BR>1:China Telecom SIM card inserted.,,,N/A,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
+6301,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_CO_CLOCK,modem_sbp_config[44].SBP_STATUS_CO_CLOCK,Not Support,no,no,no,yes,This SBP describes the feature whether the co clock is enabled or not.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,N/A,Co-TSX,OP Requirement,,,No need to test,Untested,,,,
+6302,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_CT_AUTO_REG_WHEN_MCC_CHANGED,modem_sbp_config[49].SBP_STATUS_CT_AUTO_REG_WHEN_MCC_CHANGED,Not Support,no,no,no,yes,This SBP describes the feature whether needs to auto registration when MCC is changed.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6303,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_DO_APERSISTENCE_AVOID,modem_sbp_config[48].SBP_STATUS_DO_APERSISTENCE_AVOID,Not Support,no,no,no,yes,This SBP describes is used to control whether store the Apersistence value from ACM message in order to later decide to avoid current DO channel or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6304,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_STATUS_DO_IRAT_PRIORITY_DOWNGRADING,modem_sbp_config[53].SBP_STATUS_DO_IRAT_PRIORITY_DOWNGRADING,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,EVDO,3G,,,,Untested,,,,
+6305,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_STATUS_DO_PRL_LIST_ASSOCIATED_ONLY,modem_sbp_config[53].SBP_STATUS_DO_PRL_LIST_ASSOCIATED_ONLY,Not Support,no,no,no,yes,This SBP describes Sprint device only use channels associated with 1X,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6306,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_EXT_SMS_PB_INIT,modem_sbp_config[44].SBP_STATUS_EXT_SMS_PB_INIT,Not Support,no,no,no,yes,This SBP describes the feature whether to SMS from SIM card while initialiaztion.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:If def SYS_OPTION_NO_UI, read SMS record from UIM when initialiaztion.",,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6307,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_GMSS_MRU,modem_sbp_config[46].SBP_STATUS_GMSS_MRU,Not Support,no,no,no,yes,GMSS algorithm must maintain all rat's MRU. but C2K can maintain 1x/DO mru itself before GMSS is implemented. So this SBP is used to control whether C2K use the mru setting from GMSS.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6308,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_HVOLTE,modem_sbp_config[48].SBP_STATUS_HVOLTE,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether MS supports hVolte feature or not. If this sbp enabled, C2K will send DAN message to network if in/out emergency mode, will send DCN message if reidal voice call from Volte to C2K.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Support<BR>0x00:Not Support,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6309,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_IDLE_GEO_LIST,modem_sbp_config[46].SBP_STATUS_IDLE_GEO_LIST,Not Support,no,no,no,yes,idle geo list is specified in VZW GMSS related spec. it is not mandamantory to implement it. and no test cases test it. So this SBP is used to control whether create and use a idle geo list.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6310,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_IPV6,modem_sbp_config[46].SBP_STATUS_IPV6,OTA and OTA BY OP,no,no,no,yes,This SBP to control enable/disable IPV6 feature. IPv6 defined in RFC2460.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,N/A,MD Config,Modem - Customer Requirement,,,c2k IPv6 test.,Pass,,,,
+6311,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_LBS_DATA_LOGGING,modem_sbp_config[50].SBP_STATUS_LBS_DATA_LOGGING,OTA and OTA BY OP,no,no,no,yes,This SBP describes whether MS supports LBS data logging or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support LBS logging.<BR>1:support LBS logging.,,,N/A,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
+6312,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_MIP,modem_sbp_config[46].SBP_STATUS_MIP,OTA and OTA BY OP,no,no,no,yes,"This SBP to control IP Mobility Support or not feature. As defined in RFC 2002-2006, MIP4 operation for IPv4 Mobility Support. Simple IP refers to a service in which an MS is assigned an IP address and is provided IP routing service by an access provider network, IP connectivity cannot be maintained across PDSN boundary. Different from Simple IP, Mobile IP refers to a service in which the user is able to maintain a persistent IP address even when handing off between RANs connected to different PDSNs.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,N/A,MD Config,Modem - Customer Requirement,,,lab test: MIP case,Pass,,,,
+6313,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_MIP_DMU,modem_sbp_config[46].SBP_STATUS_MIP_DMU,OTA and OTA BY OP,no,no,no,yes,"This SBP to control enable/disable DMU for Moblie IP feature. As defined in RFC4784, the Verizon Wireless Dynamic Mobile IP Key Update procedure is a mechanism for distributing and updating Mobile IP (MIP) cryptographic keys in CDMA2000(R) networks (including HRPD, which is often referred to as 1xEV-DO).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,Supported only when SBP_STATUS_MIP is enable,MD Config,Modem - Customer Requirement,,,lab test: MIP cases.,Pass,,,,
+6314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_MODEM_TURNON_AUTO,modem_sbp_config[44].SBP_STATUS_MODEM_TURNON_AUTO,Not Support,no,no,no,yes,"This feature is used to turn on modem when test modem without AP.<BR>If this feature is enabled, C2K modem will turn on automatically without AP.<BR>If this feature is disabled, C2K modem will turn on by AP.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is available in UMOLYA/LR12A and branches after them.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6315,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_STATUS_POWERUP_1X_SCAN,modem_sbp_config[52].SBP_STATUS_POWERUP_1X_SCAN,Not Support,no,no,no,yes,all rat's NW scan need to be controlled by GMSS. however CTC needs to display ECC icon while GMSS not worked. for example: no uicc or uicc whith pin enabled and not verified. This SBP is used to control whether 1x begin to scan network automatically to get ECC service at power on without GMSS's control,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6316,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_STATUS_PS_REG_SRCH_IN_SAME_CYCLE_OPTI,modem_sbp_config[54].SBP_STATUS_PS_REG_SRCH_IN_SAME_CYCLE_OPTI,Not Support,no,no,no,yes,C2K NW scan is slow when BAND 1 is enabled. there are too many frequency channels. make use of previous scan result during a MSPL search cycle to accellerate the scan speed. This SBP is used to control whether enable this feature.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SESSION_NEGO_OPTM_POWERON,modem_sbp_config[50].SBP_STATUS_SESSION_NEGO_OPTM_POWERON,OTA and OTA BY OP,no,no,no,yes,"Perviously evdo always nego IDP protocol when power on session restore. This SBP modification is for reduce power on time, bypass all protocol nego when power on session restore.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] power on to EVDO camp on<BR>[Expected Result] EVDO camp on without session nego procedure,Pass,,,,
+6318,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SHDR_HYBRID,modem_sbp_config[45].SBP_STATUS_SHDR_HYBRID,Not Support,no,no,no,yes,This SBP describes the feature whether the SHDR HYBRID is enabled or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+6319,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_STATUS_SHO_OPTIMIZATION,modem_sbp_config[79].SBP_STATUS_SHO_OPTIMIZATION,OTA and OTA BY OP,no,no,no,yes,"This SBP describes Whether MS needs to reduce soft handoff times when good signal.<BR>If this feature is enabled, MS send PSMM to NW when the times of signal strength above Tadd met threshold.<BR>If this feature is disabled, MS send PSMM to NW when the times of signal strength above Tadd met once.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP, trigger a voice call by 1xRTT<BR>[Test Step] The signal strength of a neighbour cell greater than Tadd first and then less than Tadd<BR>[Expected Result] MS did not add this neighbour cell to Aset",Pass,,,,
+6320,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_SID_MAPPING_MCC,modem_sbp_config[49].SBP_STATUS_SID_MAPPING_MCC,OTA and OTA BY OP,no,no,no,yes,"This SBP describes that If the MCC(Mobile Country Code) in Extend System Parameter message is invalid code(such as 001). Enable this feature, C2K 1xRTT will use System ID to map MCC refer to SID->MCC mapping table(such as sid:13840->MCC:460), not use the MCC in Extend System Parameter Message.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Vzw GMSS cases,Pass,,,,
+6321,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_SILENT_REDIAL_ON_SIB8,modem_sbp_config[47].SBP_STATUS_SILENT_REDIAL_ON_SIB8,Not Support,no,no,no,yes,"This is CDMA silent redial on SIB8 feature request by OP12 spec.<BR>If this feature is enabled, c2k will use LTE broadcasted SIB8 info to speed up C2K system select during silent redial procedure of hVoLTE devices.<BR>If this feature is not enabled, c2k will not use LTE broadcasted SIB8 info during c2k scan",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6322,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[43].SBP_STATUS_SLC_INVALID_SECTORID_CHK,modem_sbp_config[43].SBP_STATUS_SLC_INVALID_SECTORID_CHK,OTA and OTA BY OP,no,no,no,yes,This SBP describes the feature whether the sector ID of EV-DO is to be checked.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] set the subnetId to all zero, the power on ue on this evdo cell<BR>[Expected Result] EVDO could not camp on this subnetId invalid cell",Pass,,,,
+6323,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_SPRINT_1X_SYS_LOST,modem_sbp_config[49].SBP_STATUS_SPRINT_1X_SYS_LOST,Not Support,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,This SBP was obsolete,,,,1xRTT,3G,,,This SBP was obsolete,Untested,,,,
+6324,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_STATUS_SPRINT_AT_CMD,modem_sbp_config[51].SBP_STATUS_SPRINT_AT_CMD,Not Support,no,no,no,yes,Sprint required AT commands can take effect.<BR>The related AT command can refer to GTR_AT_CMD requirement such as GTR-ATCMD-20010<BR>If this feature is enabled:<BR>- Response of Sprint required AT command maybe different from other project.<BR>If this feature is disabled: some Sprint required AT commands may not support,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-1:int: 0-1,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
6325,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_SPRINT_BSR,modem_sbp_config[49].SBP_STATUS_SPRINT_BSR,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurereject not most preferred system while idle handoffbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
6326,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_STATUS_SPRINT_BSR_DATA_HOLD,modem_sbp_config[52].SBP_STATUS_SPRINT_BSR_DATA_HOLD,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurewait for a while before establishing a data call on less preferred systembit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
6327,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_STATUS_SPRINT_CALL_RELEASE,modem_sbp_config[53].SBP_STATUS_SPRINT_CALL_RELEASE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuretry to acquire the last channel after call releasebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6328,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_STATUS_SPRINT_DDTM,modem_sbp_config[60].SBP_STATUS_SPRINT_DDTM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDDTM feature for Sprint networkbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"For Sprint, enable DDTM feature(AT+DDTM=1); ping in EVDO, 1xRTT can not make registration and ignore paging",Pass,,,,
-6329,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_MO_SMS_BREAK_BSR,modem_sbp_config[50].SBP_STATUS_SPRINT_MO_SMS_BREAK_BSR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether continue to do BSR after sending SMSbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,sprint TC3824,Pass,,,,
-6330,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_STATUS_SPRINT_OPTM_WARM_RESET,modem_sbp_config[52].SBP_STATUS_SPRINT_OPTM_WARM_RESET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresession restore with re-nego IDP and keepalive while warm resetbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] warm power on to EVDO camp on<BR>[Expected Result] EVDO renego EVDO session after power on,Pass,,,,
-6331,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_PERSISTENCE_FAIL,modem_sbp_config[50].SBP_STATUS_SPRINT_PERSISTENCE_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether do system determination when PERSISTENCE FAILbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,sprint test cases,Pass,,,,
-6332,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_SPRINT_QC_REDIRECT,modem_sbp_config[49].SBP_STATUS_SPRINT_QC_REDIRECT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresystem acquiring move away from current channel when Quick Redirectbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]switch the current channel to the target channel.<BR>[Expected Result]switch the current channel to the target channel.,Pass,,,,
-6333,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_STATUS_SPRINT_REPORT_SO,modem_sbp_config[52].SBP_STATUS_SPRINT_REPORT_SO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurereport SO to user interfacebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,"for Sprint, make a voice call, check the SO in EM",Pass,,,,
-6334,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_SMS,modem_sbp_config[50].SBP_STATUS_SPRINT_SMS,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSMS in emergency modebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Support SPRINT SMS.<BR>0:not support SPRINT SMS.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6335,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_CMAS,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_CMAS,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Always enabled after UMOLYAbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6336,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_DISABLE_SO_NEG,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_DISABLE_SO_NEG,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresupport service option negotiationbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:support SO negotiation.<BR>1:not support SO negotiation.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6337,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_STATUS_SPRINT_TRAFF_NEW_CH_LOGGING_LAST_CHANNEL,modem_sbp_config[53].SBP_STATUS_SPRINT_TRAFF_NEW_CH_LOGGING_LAST_CHANNEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether MS needs to save the channel in ECAM as last channelbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP, a 1xRTT channel is not in CCLM<BR>[Test Step] MS received a ECAM with this channel<BR>[Expected Result] Save this channel as last channel",Pass,,,,
-6338,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_TRAFF_NEW_CH_NOT_LOGGING_MRU,modem_sbp_config[50].SBP_STATUS_SPRINT_TRAFF_NEW_CH_NOT_LOGGING_MRU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether MS needs to add new channel to MRU table in traffic statebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP, trigger a voice call by 1xRTT<BR>[Test Step] MS handoff to another channel<BR>[Expected Result] Save the target channel to MRU table",Pass,,,,
+6328,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_STATUS_SPRINT_DDTM,modem_sbp_config[60].SBP_STATUS_SPRINT_DDTM,OTA and OTA BY OP,no,no,no,yes,"This SBP describes the feature DDTM for Sprint. Once DDTM feature enabled, 1xRTT shall limit to do CS domain service, such as MO/MT voice call and registration.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"For Sprint, enable DDTM feature(AT+DDTM=1); ping in EVDO, 1xRTT can not make registration and ignore paging",Pass,,,,
+6329,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_MO_SMS_BREAK_BSR,modem_sbp_config[50].SBP_STATUS_SPRINT_MO_SMS_BREAK_BSR,OTA and OTA BY OP,no,no,no,yes,MS shoud do BSR(back ground search to acquire preferred system) after acquiring a less preferred system during power up. Sending SMS will break the BSR procedure. Whether should BSR go on after sending SMS complete? This SBP describes whether MS needs to go on BSR after sending a SMS.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,sprint TC3824,Pass,,,,
+6330,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_STATUS_SPRINT_OPTM_WARM_RESET,modem_sbp_config[52].SBP_STATUS_SPRINT_OPTM_WARM_RESET,OTA and OTA BY OP,no,no,no,yes,"Session restore bypass verify not re-nego any protocol, for sprint it require re-nego every warm reset. This SBP describes whether MS re-nego IDP and keepalive while warm reset or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,This feature is always on when SBP_ID_SPRINT set to true,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] warm power on to EVDO camp on<BR>[Expected Result] EVDO renego EVDO session after power on,Pass,,,,
+6331,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_PERSISTENCE_FAIL,modem_sbp_config[50].SBP_STATUS_SPRINT_PERSISTENCE_FAIL,OTA and OTA BY OP,no,no,no,yes,"Mobile should do persistence test before sending probe, persistence fail will caused access fail. If persistence fail, how does mobile handle its state machine? Stay in idle or go to system determination. This SBP describes whether MS needs to do system determination when access persistence fail happened.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,sprint test cases,Pass,,,,
+6332,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_SPRINT_QC_REDIRECT,modem_sbp_config[49].SBP_STATUS_SPRINT_QC_REDIRECT,OTA,no,no,no,yes,"This SBP describes that Quick Redirect would instuct AT to move away from current channel during process of acquiring system for Sprint requirement.<BR>When Redirect is true contained in Quick Config message and this SBP is set to be true, AT will move away from current channel for current system acquireing.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]switch the current channel to the target channel.<BR>[Expected Result]switch the current channel to the target channel.,Pass,,,,
+6333,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_STATUS_SPRINT_REPORT_SO,modem_sbp_config[52].SBP_STATUS_SPRINT_REPORT_SO,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to fulfill some costomer's requirement for whether modem should report current service option to UI.<BR>When this SBP enabled, modem should report current service option to UI, otherwise, modem need not report current service option.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,"for Sprint, make a voice call, check the SO in EM",Pass,,,,
+6334,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_SMS,modem_sbp_config[50].SBP_STATUS_SPRINT_SMS,OTA BY OP,no,no,no,yes,This SBP describes whether MS supports MO SMS in emergecy mode or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Support SPRINT SMS.<BR>0:not support SPRINT SMS.,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6335,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_CMAS,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_CMAS,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6336,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_DISABLE_SO_NEG,modem_sbp_config[51].SBP_STATUS_SPRINT_SMS_DISABLE_SO_NEG,OTA BY OP,no,no,no,yes,This SBP describes whether MS supports service option negotiation is not supported or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:support SO negotiation.<BR>1:not support SO negotiation.,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6337,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_STATUS_SPRINT_TRAFF_NEW_CH_LOGGING_LAST_CHANNEL,modem_sbp_config[53].SBP_STATUS_SPRINT_TRAFF_NEW_CH_LOGGING_LAST_CHANNEL,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether MS needs to save the channel in ECAM as last channel.<BR>If this feature is enabled, MS MUST save the channel in ECAM as last channel even though the channel is not in CCLM.<BR>If this feature is disabled, MS can not save the channel in ECAM as last channel if the channel is not in CCLM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP, a 1xRTT channel is not in CCLM<BR>[Test Step] MS received a ECAM with this channel<BR>[Expected Result] Save this channel as last channel",Pass,,,,
+6338,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[50].SBP_STATUS_SPRINT_TRAFF_NEW_CH_NOT_LOGGING_MRU,modem_sbp_config[50].SBP_STATUS_SPRINT_TRAFF_NEW_CH_NOT_LOGGING_MRU,OTA and OTA BY OP,no,no,no,yes,"This SBP describes Whether MS needs to add new channel to MRU table in traffic state.<BR>If this feature is enabled, MS MUST not add new mode/band/channel combinations of a traffic channel into the MRU table.<BR>If this feature is disabled, MS add new mode/band/channel combinations of a traffic channel into the MRU table.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP, trigger a voice call by 1xRTT<BR>[Test Step] MS handoff to another channel<BR>[Expected Result] Save the target channel to MRU table",Pass,,,,
6339,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_CSS_1X_MAPE_HOME_SYS_AVOID_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_CSS_1X_MAPE_HOME_SYS_AVOID_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureHome system avoidance once MAPE registration failure occured releated features of c2k modem request by Vzw specbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6340,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_ONLY_REJECT_REDIR_IF_NEG_IN_PRL_FEATURE,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_ONLY_REJECT_REDIR_IF_NEG_IN_PRL_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurereject C2K system found negative in NAM or PRLbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6340,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_ONLY_REJECT_REDIR_IF_NEG_IN_PRL_FEATURE,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_ONLY_REJECT_REDIR_IF_NEG_IN_PRL_FEATURE,Not Support,no,no,no,yes,This SBP describes whether reject the C2K system if found negative in NAM or PRL on Redirection Scan state.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
6341,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_CSS_1X_RESTRICT_SILENTRETRY_TO_SAME_GEO_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_CSS_1X_RESTRICT_SILENTRETRY_TO_SAME_GEO_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresilent try channels to same GEObit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6342,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_USE_NAM_FOR_VALIDATION_FEATURE,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_USE_NAM_FOR_VALIDATION_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureC2K use NAM for validationbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6343,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_ENH_SYSTEM_SELECT_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_ENH_SYSTEM_SELECT_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDefault band system select features of c2k modem request by Vzw spec.bit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6342,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_USE_NAM_FOR_VALIDATION_FEATURE,modem_sbp_config[46].SBP_STATUS_SYS_CSS_1X_USE_NAM_FOR_VALIDATION_FEATURE,Not Support,no,no,no,yes,"This SBP describes when the C2K system can not be found in PRL, then use NAM to validate.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6343,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_ENH_SYSTEM_SELECT_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_ENH_SYSTEM_SELECT_FEATURE,Not Support,no,no,no,yes,"This is a default band system select features of c2k modem request by OP12 spec.<BR>If this feature is enabled, c2k will perform default band system network search after all channels in PRL are searched but failed as required by OP12 spec .<BR>If this feature is not enabled, the default band channels defined in NAM will not tried after all the channels in PRL are tried but failed",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
6344,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_ERI_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_ERI_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete.This feature is implemented by APbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,(Sprint) System Selection,OP Requirement,,,,Untested,,,,
-6345,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_SYS_OPTION_OTASP,modem_sbp_config[44].SBP_STATUS_SYS_OPTION_OTASP,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSTATUS_SYS_OPTION_OTASPbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support OTASP,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6346,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_REGISTRATION_THROTTLING_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_REGISTRATION_THROTTLING_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRegistration Throttling to avoid draining battery in area where MS continously fails to register due to Max Access Probe failuresbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine,<BR>Init:<BR>config a 1xRTT cell which ignore any access attempt<BR>Test Step:<BR>1. power on the phone;<BR>2. UE camp on the cell;<BR>3. UE tries to register to the cell 8 times;<BR>Expected Result:<BR>after step3, UE does not make register in 3mins;",Pass,,,,
-6347,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_STATUS_SYS_REG_THROTTLING_ENHANCE,modem_sbp_config[55].SBP_STATUS_SYS_REG_THROTTLING_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featureforbid the regostration as rulebit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,none,Pass,,,,
-6348,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_SAFETY_NET_REGISTRATION_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_SAFETY_NET_REGISTRATION_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePerform safety net registration in network that may result in the network not knowing the whereabouts of the MS for extended periodsbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,none,Pass,,,,
-6349,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_STATUS_VZW_1XRTT_DISABLE_AHO_OPTIMIZE,modem_sbp_config[54].SBP_STATUS_VZW_1XRTT_DISABLE_AHO_OPTIMIZE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature1XRTT access handoff optimizebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Vzw, MT call testing in poor signal",Pass,,,,
-6350,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_STATUS_VZW_1XRTT_SYSTEM_LOST_SEARCH_FOR_UOI_SR,modem_sbp_config[55].SBP_STATUS_VZW_1XRTT_SYSTEM_LOST_SEARCH_FOR_UOI_SR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSystem lost search for UOI SRbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Vzw, MO call test in poor signal",Pass,,,,
-6351,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_VZW_DATA_ENHANCEMENT,modem_sbp_config[46].SBP_STATUS_VZW_DATA_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature Data service special features developed for Verizon:<BR>0 Not support Data service special features;<BR>1 support Data service special features",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,,MD Config,Modem - Customer Requirement,,,VZW data test,Pass,,,,
-6352,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_DISABLE_EVDO_SUSPEND_TIMING,modem_sbp_config[48].SBP_STATUS_VZW_DISABLE_EVDO_SUSPEND_TIMING,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEVDO suspend timing is invalid or notbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]config susepnd time parameter in the connection close message.<BR>[Expected Result] AT response the susepnd time to AN in the connection close message.,Pass,,,,
-6353,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_E911,modem_sbp_config[47].SBP_STATUS_VZW_E911,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureMultimode E911 releated features of c2k modem request by Vzw specbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,(VzW) E911,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6354,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_VZW_FEMTOCELL_FEATURE,modem_sbp_config[49].SBP_STATUS_VZW_FEMTOCELL_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIndicate whether the current system is in femtocell according to VzW specbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]Report the VAL_CLC_CELL_INFO_MSG to VAL when EVDO camps on.<BR>[Expected Result]Report the VAL_CLC_CELL_INFO_MSG to VAL when EVDO camps on.,Pass,,,,
-6355,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_VZW_LTE_MMO_SCAN,modem_sbp_config[49].SBP_STATUS_VZW_LTE_MMO_SCAN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureRat change to LTE using MPSR manner when EVDO is in connected statebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]EVDO sends CLC_ERRC_EVDO_PS_CONNECTION_STATUS_IND to LTE.<BR>[Expected Result]EVDO sends CLC_ERRC_EVDO_PS_CONNECTION_STATUS_IND to LTE.,Pass,,,,
-6356,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_LTE_SIB8_TIMING,modem_sbp_config[48].SBP_STATUS_VZW_LTE_SIB8_TIMING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUtilize the CDMA-LTE timing relation in SIB8 to accelerate 1xRTT/EVDO cell search procedurebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IRAT(C2K-LTE),OP Requirement,,,"Test in machine (Y/N): Y<BR> Test Time (minutes): 240<BR> [Init] power up, camp on LTE/1xRTT on SPRINT network<BR> [Test Step] start LTE->EVDO Irat measure<BR> [Expected Result] EVDO can find ncell with LTE SIB8 timing quickly",Pass,,,,
-6357,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_MEID_ME,modem_sbp_config[47].SBP_STATUS_VZW_MEID_ME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport MEID ME in Status Responsebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,test case: C.S0073-B section 2.2.3,Pass,,,,
-6358,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_OTA,modem_sbp_config[47].SBP_STATUS_VZW_OTA,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresupport SIM cold reset after OTASP/PAbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:special procedure for VzW OTASP.,,,,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
-6359,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_SMS,modem_sbp_config[47].SBP_STATUS_VZW_SMS,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurekeep traffic channel alive 6 seconds after MO SMS donebit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:special procedure for VZW SMS.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6360,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_VZW_SMS_BSP,modem_sbp_config[49].SBP_STATUS_VZW_SMS_BSP,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether the current project is LG BSP project for Verizon or not.bit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-6361,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_SMS_CMAS,modem_sbp_config[47].SBP_STATUS_VZW_SMS_CMAS,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Always enabled after UMOLYAbit 0:0:NAbit 1:1:NA",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-6362,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_SUPL,modem_sbp_config[48].SBP_STATUS_VZW_SUPL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuresupport C2K SUPL AGPS in C2K networkbit 0:0:Not enabledbit 1:1:Enabled<BR>phase out, not used.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support SUPL.,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6363,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_TDO,modem_sbp_config[47].SBP_STATUS_VZW_TDO,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurewait TDO to camp on DObit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6364,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_TX_CLOSELOOP,modem_sbp_config[48].SBP_STATUS_VZW_TX_CLOSELOOP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIndicate whether the \"Tx power up faster and down slower\" funtion will be open or nobit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,(VzW) CDMA-Less,OP Requirement,,,"Enter EVDO connect state,set 8960 instrument at all up Rpcbit or all down Rpcbit mode",Pass,,,,
-6365,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_STATUS_VZW_UNSOLICITED_LOCATION_NOTIFICATION,modem_sbp_config[54].SBP_STATUS_VZW_UNSOLICITED_LOCATION_NOTIFICATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurewhether MS need report unsolicited location notification to networkbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] evdo idle handoff to another subnetId cell<BR>[Expected Result] UE report a location_notification OTA message to network,Pass,,,,
-6366,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_STMSI_PAGING_ATTACK_HANDLING,modem_sbp_config[84].SBP_STMSI_PAGING_ATTACK_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureS-TMSI paging attack handlingbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the handling of S-TMSI paging attack.<BR>0:Disable the handling of S-TMSI paging attack.,,,__ENABLE_SBP_STMSI_PAGING_ATTACK_HANDLING__,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
-6367,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_SUPPORT_A5_4,modem_sbp_config[58].SBP_SUPPORT_A5_4,OTA and OTA BY OP,no,no,no,yes,"The A5/4 algorithm is one of cipher modes used in GSM after the MS enters dedicated state and starts ciphering. <BR>If the MS support A5/4 algorithm, it will report this capability support on the CLASSMARK to the network and the network,<BR>if supports this cipher algorithm, may request the MS to start ciphering using A5/4.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Support for A5_4 is disabled.<BR>0:Support for A5_4 is enabled.,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6368,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_SUPPORT_GEA1,modem_sbp_config[79].SBP_SUPPORT_GEA1,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable GEA1 Encryption Algorithm bit. <BR>The GEA1 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA1 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA1.<BR>This SBP is present under SBP feature flag __DISABLE_GEA1__ which is used in setting the SBP value",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA1 Disabled<BR>0x01:GEA1 Enabled,,,This SBP is present under SBP feature flag __DISABLE_GEA1__ which is used in setting the SBP value,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA1 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6369,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_SUPPORT_GEA2,modem_sbp_config[87].SBP_SUPPORT_GEA2,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable GEA2 Encryption Algorithmbit.<BR>The GEA2 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA2 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA2.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA2 Disabled<BR>0x01:GEA2 Enabled,,,This SBP is present under SBP feature flag __DISABLE_GEA2__ which is used in setting the SBP value,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA2 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6370,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_SUPPORT_GEA3,modem_sbp_config[87].SBP_SUPPORT_GEA3,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable GEA3 Encryption Algorithm bit.<BR><BR>The GEA3 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA3 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA3.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA3 Disabled<BR>0x01:GEA3 Enabled,,,This SBP is present under SBP feature flag __DISABLE_GEA3__ which is used in setting the SBP value,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA3 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6371,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_SUPPORT_GEA4,modem_sbp_config[79].SBP_SUPPORT_GEA4,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Enable GEA4 Encryption Algorithm bit. <BR>The GEA4 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA4 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA4.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA4 Disabled<BR>0x01:GEA4 Enabled,,,This SBP is present under SBP feature flag __GEA4_ALGORITHM_SUPPORT_CAPABILITY__ which is used in setting the SBP value. This SBP can be configured using feature flag __DISABLE_GEA4__.The feature is coded under __A54_ALGORITHM_SUPPORT__ flag which is us,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA4 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6372,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_SYNC_RAU,modem_sbp_config[78].SBP_SYNC_RAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIf RRC_CNX is abruptly released perform RAU to sync UE and network state to not miss MT pagebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:SYNC RAU would be applied for gemini interruptions inorder to sync the lost connection with the network<BR>0:SYNC RAU would not be applied for gemini interruptions inorder to sync the lost connection with the network,,,__ENABLE_SYNC_RAU__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6373,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_T3346_POWER_ON_RESTART,modem_sbp_config[19].SBP_T3346_POWER_ON_RESTART,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. Always enabled after UMOLY if compile option __REL10__ is enabledbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6374,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_T3402_POWER_ON_RESTART,modem_sbp_config[19].SBP_T3402_POWER_ON_RESTART,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureT3402 power-on restart supportbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Restart the T3402 timers that are not expired yet at modem power-on.<BR>0:Not restart the T3402 timers that are not expired yet at modem power-on.,,,__SBP_T3402_POWER_ON_RESTART__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6375,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_T3402_STOP_WHEN_MANUAL_SELECT,modem_sbp_config[22].SBP_T3402_STOP_WHEN_MANUAL_SELECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureStop T3402 when manual selectionbit 0:0:Disable. Spec behaviorbit 1:1:Enabled. Stop T3402 when manual selection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Stop T3402 when manual selection.<BR>0:Disable. Spec behavior.,,,__SBP_T3402_STOP_WHEN_MANUAL_SELECT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6376,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_TC01_ATP_TABLES,modem_sbp_config[17].SBP_TC01_ATP_TABLES,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUse TC01 ATP tables or notbit 0:0:Disabled. Not use TC01 ATP tables for MTK turnkeybit 1:1:Enabled. Use TC01 ATP tables for TC01",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6377,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_TCM_ENABLE_INACTIVITY_TIMER,modem_sbp_config[34].SBP_TCM_ENABLE_INACTIVITY_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDeactivate long time (inactivity timer) inactive PDN (no UL/DL packets)bit 0:0:Disable Inactivity Timerbit 1:1:Enable Inactivity Timer",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable Inactivity Timer feature<BR>0:Disable Inactivity Timer feature,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6378,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_TCM_IMS_ROAMING_ALWAYS_ON,modem_sbp_config[57].SBP_TCM_IMS_ROAMING_ALWAYS_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeaturePretend UE to support IMS-Roaming in TCM and PAM modules for testingbit 0:0:Not to pretend UE to support IMS-Roaming in TCM and PAM modules for testingbit 1:1:Pretend UE to support IMS-Roaming in TCM and PAM modules for testing",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If this PDN does not support PS DATA OFF, the UE will run PS DATA OFF logic on this PDN<BR>0:If this PDN does not support PS DATA OFF, the UE will not run PS DATA OFF logic on this PDN. The UE runs the existing MTK data off logic.",,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6379,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_TCM_QOS_SIG_IND_ENABLED,modem_sbp_config[23].SBP_TCM_QOS_SIG_IND_ENABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAuto set Signaling-Indication flag in Requested QoSbit 0:0:Not auto set Signaling-Indication flag in Requested QoSbit 1:1:Would auto set Signaling-Indication flag in Requested QoS",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Would auto set Signaling-Indication flag in Requested QoS when defining one PDN as an IMS PDN ( \<IM_CN_Signalling_Flag_Ind\> == 1 )<BR>0:Not auto set Signaling-Indication flag in Requested QoS when defining one PDN as an IMS PDN ( \<IM_CN_Signalling_Flag_Ind\> == 1 ),,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6380,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_TDD_ECSFB_AVOID_LU_FAIL_CELLS,modem_sbp_config[77].SBP_TDD_ECSFB_AVOID_LU_FAIL_CELLS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature4G2 eCSFB to avoid selection of LU fail cellsbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-6381,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_TERMINAL_CAPABILITY_FLEX,modem_sbp_config[25].SBP_TERMINAL_CAPABILITY_FLEX,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo support flexible UICC/CLF interface settingbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6382,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_TFTLIB_PF_REALLOC,modem_sbp_config[39].SBP_TFTLIB_PF_REALLOC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureThe memory locations of TFT packet filters will be re-allocated from dynamic memory address to static memory address to avoid dynamically allocated memory consumption.bit 0:0:Disable. The packet filters in the dynamic memory address will not be re-allocated to static memory addressbit 1:1:Enable. If the memory address of packet filter is dynamically allocated, the packet filter will be re-allocated to static memory address if the static memory address is available.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If the memory address of packet filter is dynamically allocated, the packet filter will be re-allocated to static memory address if the static memory address is available.<BR>0:The packet fileters in the dynamic memory address will not be moved (re-allocated) to static memory address.",,,,R15 baseline 5G,5G Baseline,,,Test in machine (N) <BR>[Init] <BR>Read NVRAM.<BR> [Expected Result]<BR>modem_sbp_config[39].SBP_TFTLIB_PF_REALLOC is NOT in NVRAM.,Pass,,,,
-6383,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_TFT_UL_PF_CHECK,modem_sbp_config[37].SBP_TFT_UL_PF_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCheck if the resulting TFT contains any uplink packet filter according to 3GPP 24.301 CR1938.bit 0:0:Disable. The UE will not check if the uplink packet filter exists in the resulting TFTbit 1:1:Enable. If the uplink packet filter does not exist in the resulting TFT, the UE will reply with Semantic errors in packet filters",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If the uplink packet filter does not exist in the resulting TFT, UE will reply with ESm case #44 "semantic errors in packet fitler(s)"<BR>0:The UE will not check if the uplink packter fitler existes in the resulting TFT.",,,,R15 baseline 5G,5G Baseline,,,Test in machine (N) <BR>[Init] <BR>Read NVRAM.<BR> [Expected Result]<BR>modem_sbp_config[37].SBP_TFT_UL_PF_CHECK is NOT in NVRAM.,Pass,,,,
-6384,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_THROTTLE_COUNTER_RESET_EXEMPTION,modem_sbp_config[35].SBP_THROTTLE_COUNTER_RESET_EXEMPTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureControl whether to avoid resetting the throttling counter in case of RA or P-CSCF errorbit 0:0:Throttling counter will always be reset.bit 1:1:Throttling counter will not always be reset.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
-6385,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_TIN_DELETE_NOT_USE_MAPPED_GUTI,modem_sbp_config[70].SBP_TIN_DELETE_NOT_USE_MAPPED_GUTI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDo not use mapped GUTI to attach when TIN is deletedbit 0:0:Disable. Can use mapped GUTI to attach when TIN is deleted.bit 1:1:Enabled. Do not use mapped GUTI to attach when TIN is deleted.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Do not use mapped GUTI to attach when TIN is deleted.<BR>0:Disable. Can use mapped GUTI to attach when TIN is deleted.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6386,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_TIN_DELETE_USE_IMSI,modem_sbp_config[70].SBP_TIN_DELETE_USE_IMSI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUse IMSI to attach when TIN is deletedbit 0:0:Disable. Will not directely use IMSI for ATTACH REQ when TIN is deletedbit 1:1:Enabled. Use IMSI for ATTACH REQ when TIN is deleted.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Use IMSI for ATTACH REQ when TIN is deleted.<BR>0:Disable. Will not directely use IMSI for ATTACH REQ when TIN is deleted.,,,__ENABLE_LTE_TIN_DELETE_USE_IMSI__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6387,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_TMOUS_VOLTE_FT,modem_sbp_config[16].SBP_TMOUS_VOLTE_FT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTMOUS VOLTE enhancementbit 0:0:UE can not trigger early radio link failurebit 1:1:UE can trigger early radio link failure during VOLTE call",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE can trigger early radio link failure during VOLTE call<BR>0:UE can not trigger early radio link failure,,,__TMOUS_VOLTE_FT__,IMS,IMS,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6388,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_TMO_ECC_NOTIFICATION_ENABLE,modem_sbp_config[3].SBP_TMO_ECC_NOTIFICATION_ENABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure TMO ECC Notificationbit 0:0:USSD not supported while ECC is ongoing but integrity is OFFbit 1:1:USSD is supported while ECC is ongoing but integrity is OFF",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:Disable Modem will not actively control the RAT mode, but listen to the setting from AT command or NVRAM.<BR>0x1:Enable. Modem will actively control the RAT mode. The setting from AT command is ignored .",,,__TMO_ECC_NOTIFICATION_ENABLE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6389,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_TMO_GBA,modem_sbp_config[6].SBP_TMO_GBA,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete. No need to support this feature for new SPEC versionbit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
-6390,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_TMO_IRAT_SET_ACTIVE_FLAG,modem_sbp_config[8].SBP_TMO_IRAT_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE will set the 'active' flag in the TAU request after IRAT from 2/3G to 4Gbit 0:0:Disabled. UE will not set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G.bit 1:1:Enabled. UE will set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G.<BR>0:Disabled. UE will not set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G.,,,__TMO_IRAT_SET_ACTIVE_FLAG__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6391,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_TMO_PLMN_MATCHING,modem_sbp_config[2].SBP_TMO_PLMN_MATCHING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo prevent the issue of network configuration, treat T-Mobile 31026f and 310260 as equivalentbit 0:0:Turn-off. Not treat TMO PLMNs as matchingbit 1:1:Turn-on. Treat TMO PLMNs as matching",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6392,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_TMO_REMOTE_SIM_LOCK,modem_sbp_config[7].SBP_TMO_REMOTE_SIM_LOCK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureT-Mobile Remote SIM-ME Lockbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,(TMO) SIM-ME Lock,OP Requirement,,,covered by SBP framework UT/IT result,Pass,,,,
-6393,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_TREAT_PLMN_FROM_IMSI_IN_OPLMN_AS_EHPLMN,modem_sbp_config[95].SBP_TREAT_PLMN_FROM_IMSI_IN_OPLMN_AS_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureIf EHPLMN presents and does not contain the PLMN of IMSI, we would treat the PLMN of IMSI as HPLMN only when OPLMNs contains this PLMN of IMSI toobit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6394,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_TRIGGER_AFR_AFTER_RLF,modem_sbp_config[94].SBP_TRIGGER_AFR_AFTER_RLF,OTA and OTA BY OP,no,no,no,yes,"This is a feature in which when CSFB call triggered in 2G and RLF happens, then 2G will trigger AFR to higher RAT.There will be no call re-establishment triggered in 2G after RLF when this SBP will be on due to AFR triggered. In non CSFB call case, this SBP has no impact on re-establishment and higher layer can still trigger re-establishment after RLF.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. AFR shall be triggered after 2G CSFB call failed due to RLF.<BR>0:Disable. AFR shall not be triggered after 2G CSFB call failed due to RLF.,,,__TRIGGER_AFR_AFTER_RLF__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6395,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_TRIGGER_ATTACH_WITH_IMSI,modem_sbp_config[99].SBP_TRIGGER_ATTACH_WITH_IMSI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSet the IMSI as MS identity in GMM ATTACH REQUESTbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If disable, GMM trigger ATTACH REQEUST in 3G as per spec<BR>0x1:If enable, GMM trigger ATTACH REQUEST in 3G with MS Identity as IMSI even though UE has valid PTMSI",,,__TRIGGER_ATTACH_WITH_IMSI__,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] Bootup up device <BR>[Test Step] <BR>1. Perform registration on LTE.<BR>2. Change RAT mode to 3G only. <BR><BR>[Expected Result] <BR>GMM trigger Attach with IMSI as MS identity,Pass,,,,
-6396,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_TRIGGER_GPRS_DETACH_WITH_POWER_OFF_ON_SIM_DISABLED,modem_sbp_config[100].SBP_TRIGGER_GPRS_DETACH_WITH_POWER_OFF_ON_SIM_DISABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTrigger GPRS detach with POWER OFF on SIM disabledbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:When AT+ESIMPOWER =10 (SIM disabled) has been received, Modem behaves as SIM DISABLE but perform as POWER_OFF_GPRS_DETACH_REQUEST.<BR>0:When AT+ESIMPOWER =10 (SIM disabled) has been received, Modem behaves as SIM DISABLE but perform as normal GPRS DETACH REQUEST.",,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6397,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_TRY_RACH_BAR_CELL_DURING_STORE_LIST,modem_sbp_config[79].SBP_TRY_RACH_BAR_CELL_DURING_STORE_LIST,Not Support,no,no,no,yes,0:0:Not Supportedbit,BIT,1,,1,,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support<BR>1:support,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6398,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_T_PLUS_W,modem_sbp_config[59].SBP_T_PLUS_W,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable T+W featurebit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6399,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_UDC,modem_sbp_config[85].SBP_UDC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureEnable Uplink Data Compression(UDC)bit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6400,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_UECAP_SIZE_DYNAMIC_ADJUST,modem_sbp_config[60].SBP_UECAP_SIZE_DYNAMIC_ADJUST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUE cap size dynamic adjustmentbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6401,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_UL1D_CS_CS3_THD_DOCOMO_EN,modem_sbp_config[87].SBP_UL1D_CS_CS3_THD_DOCOMO_EN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCS3 Threshold incresed by 2dbbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,No,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) :Y<BR> Test Steps:<BR> Step1: Power on UE (AT)<BR> Step2: Start U-Plane by UE/NW<BR> Step3: The U-Plane is connected successfully.<BR> Step4: Power up WCDMA2 for radio link addition<BR> Step5: Power up WCDMA3 for radio link addition<BR> Step6: Power down WCDMA3 for radio link replacement<BR> Step7: Power up WCDMA4 for radio link replacement,Pass,,,,
-6402,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_UL1D_CS_TRIGGER_EXTEND_RLF_EN,modem_sbp_config[71].SBP_UL1D_CS_TRIGGER_EXTEND_RLF_EN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureCS triggers Extend RLF Timerbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,Not possible.,Untested,,,,
-6403,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_UMAC_TVM_DECREASE_TRANSMITTED,modem_sbp_config[12].SBP_UMAC_TVM_DECREASE_TRANSMITTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDecrease TVM value by data transmitted in current TTI. SBP for internal test only.<BR>bit 0=Disabled. The TVM will not decrease data volumn transmitted in current TTI. <BR>bit 1=Enabled. it will decrease TVM for the data transmitted in currnet TTI.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. it will decrease TVM for the data transmitted in currnet TTI.<BR>0:Disabled. The TVM will not decrease data volumn transmitted in current TTI.,,,,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for 3g Data on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6404,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_UMAC_TVM_FAVOR_POW_PERF,modem_sbp_config[12].SBP_UMAC_TVM_FAVOR_POW_PERF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUsed to reduce power consumption by decreasing TVM value.SBP for internal test only<BR>bit 0:Disabled. The TVM will not decrease data volumn transmitted in current TTI in DCH.<BR>bit 1:Enabled. it will decrease TVM for the data transmitted in currnet TTI in DCH. <BR>It may make UE back to FACH when TVM is near threshold.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. it will decrease TVM for the data transmitted in currnet TTI in DCH.<BR>0:Disabled. The TVM will not decrease data volumn transmitted in current TTI in DCH.,,,,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for 3g Data on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
-6405,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_UMTS_CB_OFF,modem_sbp_config[0].SBP_UMTS_CB_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure Cell Broadcast enabling in UMTS networkbit 0:0:Cell Broadcast in UMTS network is enabledbit 1:1:Cell Broadcast in UMTS network is disabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Disable this feature means UMTS cell broadcase will be usual way<BR>0x1:Enable this feature means UMTS cell broadcast is turned off.,,,__3G_CB_OFF__,WCDMA Protocol (R8 Baseline),3G,,,NA,Pass,,,,
-6406,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_UNCOMP_CNTXT_USE_IR,modem_sbp_config[93].SBP_UNCOMP_CNTXT_USE_IR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureAlways use IR while uncompressed context is selectedbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes): 10<BR><BR>[Init] <BR>Attach to LTE and IMS PDN is activated. VoLTE icon is available.<BR><BR>[Test Step] <BR>1. Start and keep VoLTE call, and do cell handover many times<BR><BR>[Expected Result]<BR>ROHC sends IR packet when using ROHC uncompressed profile <BR> for ROHC compression. This can be found in L2 trace. E.g.,<BR><BR>[ROHC-C][CNTXT] (cid 0, profile_id 0x0) is created for rb_idx 2 <BR>[ROHC-C][PKT] rohc_c_pt: 1, pt_ext: -1 [1:IR 14:UO0 18:UOR2 21:R0]<BR><BR>profile_id 0x0 represents ROHC uncompressed profile<BR>rohc_c_pt 1 represents IR packet",Pass,,,,
-6407,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_UPDATE_CFU_ICON,modem_sbp_config[79].SBP_UPDATE_CFU_ICON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUpdate the CFIS/CPHS filebit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-6408,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_UPDATE_SIB19_INFO,modem_sbp_config[42].SBP_UPDATE_SIB19_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] This feature enables UE to avoid sending SIB19 info indication to L4C",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6409,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_URC_UMTS_PS_RAB_STATUS,modem_sbp_config[42].SBP_URC_UMTS_PS_RAB_STATUS,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature Send URC for UMTS PS RAB statusbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,,,,,"After UE registering, check whether AP behaves normally",Pass,,,,
-6410,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_GMM_PROC_WHEN_ABNORMAL_T3302_RUNNING,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_GMM_PROC_WHEN_ABNORMAL_T3302_RUNNING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureUser request not trigger ATTACH/RAU in attempt-to-update state and T3302 runningbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:User trigger ATTACH or RAU in attempt-to-update state and T3302 running<BR>1:User request not trigger ATTACH or RAU in attempt-to-update state and T3302 running .,,,,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6411,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_MM_PROC_WHEN_ABNORMAL_T3212_RUNNING,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_MM_PROC_WHEN_ABNORMAL_T3212_RUNNING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureConfigure whether to allow user to trigger LU in attempt-to-update state and T3212 runningbit 0:0:Allow User request to trigger LU in attempt-to-update state and T3212 runningbit 1:1:Do not allow user to trigger LU in attempt-to-update state and T3212 running",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE will not trigger LU when MM is in attempting to update state and T3212 running<BR>0:UE will trigger LU when MM is in attempting to update state and T3212 running,,,,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6412,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_USE_IMSI_IN_EMERGENCY_ATTACH,modem_sbp_config[88].SBP_USE_IMSI_IN_EMERGENCY_ATTACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureForce to use IMSI in Emergency Attach Requestbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6413,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_USE_RESTRICTIVE_SYSTEM_MATCH_FEATURE,modem_sbp_config[51].SBP_USE_RESTRICTIVE_SYSTEM_MATCH_FEATURE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurerestrictive match when validate a C2K systembit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6414,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_USE_SM_QOS_SUBSCRIBED,modem_sbp_config[4].SBP_USE_SM_QOS_SUBSCRIBED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSM use QoS Subscribed Valuebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE shall use subscribed values(0x00) for all QoS params<BR>0:UE shall use MTK default QoS setting (sdu_error_ratio=4; reliability_class=3; delivery_order=2; Rest all values as subscribed),,,__USE_SM_QOS_SUBSCRIBED__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6415,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_USIM_CSP_SUPPORT,modem_sbp_config[3].SBP_USIM_CSP_SUPPORT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureTo Support CSP file Under USIM Applicationbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6416,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_VDM_ADS_ECMP_SET_TO_WLAN,modem_sbp_config[38].SBP_VDM_ADS_ECMP_SET_TO_WLAN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLY. User could refer to NVRAM_EF_VDM_ADS_PROFILE_LID for the same funtionality.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6417,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_VDM_CONVERT_ATD_TO_ATDE_FOR_ECC_CHECK,modem_sbp_config[29].SBP_VDM_CONVERT_ATD_TO_ATDE_FOR_ECC_CHECK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLY. User could refer to NVRAM_EF_VDM_ADS_PROFILE_LID for the same funtionality.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6418,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_VDM_DELAY_RESUME_ADS_FOR_CELL_INFO,modem_sbp_config[35].SBP_VDM_DELAY_RESUME_ADS_FOR_CELL_INFO,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLY. User could refer to NVRAM_EF_VDM_ADS_PROFILE_LID for the same funtionality.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6419,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_VDM_REDIAL_IMS_VT_TO_CS_VOICE,modem_sbp_config[13].SBP_VDM_REDIAL_IMS_VT_TO_CS_VOICE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLY. User could refer to NVRAM_EF_VDM_ADS_PROFILE_LID for the same funtionality.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6420,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_VDM_REVERT_TO_CELLULAR_FOR_ECC,modem_sbp_config[28].SBP_VDM_REVERT_TO_CELLULAR_FOR_ECC,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureObsolete after UMOLYA.bit 0:0:N/Abit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6345,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[44].SBP_STATUS_SYS_OPTION_OTASP,modem_sbp_config[44].SBP_STATUS_SYS_OPTION_OTASP,Not Support,no,no,no,yes,This SBP to control enable/disable OTASP feature.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support OTASP,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6346,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_REGISTRATION_THROTTLING_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_REGISTRATION_THROTTLING_FEATURE,OTA and OTA BY OP,no,no,no,yes,"This SBP describes Registration Throttling to avoid draining battery in area where MS continously fails to register due to Max Access Probe failures.<BR>If 1xRTT make registration fail with max Access Probe continously 8 times, MS would forbid 1xRTT register 3mins. Then if 1xRTT also register fail continously 8 times, MS would forbid 1xRTT register 5mins, even 10mins.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine,<BR>Init:<BR>config a 1xRTT cell which ignore any access attempt<BR>Test Step:<BR>1. power on the phone;<BR>2. UE camp on the cell;<BR>3. UE tries to register to the cell 8 times;<BR>Expected Result:<BR>after step3, UE does not make register in 3mins;",Pass,,,,
+6347,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_STATUS_SYS_REG_THROTTLING_ENHANCE,modem_sbp_config[55].SBP_STATUS_SYS_REG_THROTTLING_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"This SBP is to enhance the 1xRTT registration throttling feature.If there is dual sim, but 1xRTT in poor signal, should decrase the registration frequency.<BR>In Dual SIM, if 1xRTT make registration fail with max Access Probe or system lost continously 4 times, MS would forbid 1xRTT register 3mins, Then if 1xRTT also register fail continously 4 times, MS would forbid 1xRTT register 5mins, even 10mins.But if the signal of the camp on Cell is good, it would trigger registration when the forbidden timer is active.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature can be enabled by adding __ENABLE_1X_REGISTRATION_THROTTLING_ENHANCE__ in makefile.,MD Config,Modem - Customer Requirement,,,none,Pass,,,,
+6348,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[45].SBP_STATUS_SYS_SAFETY_NET_REGISTRATION_FEATURE,modem_sbp_config[45].SBP_STATUS_SYS_SAFETY_NET_REGISTRATION_FEATURE,OTA and OTA BY OP,no,no,no,yes,"This SBP describes perform safety net registration in network that may result in the network not knowing the whereabouts of the MS for extended periods.<BR>If 1xRTT camp on or Idle handoff to a system which donot support zone based registration or parameter change registration, trigger registration in this system.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,none,Pass,,,,
+6349,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_STATUS_VZW_1XRTT_DISABLE_AHO_OPTIMIZE,modem_sbp_config[54].SBP_STATUS_VZW_1XRTT_DISABLE_AHO_OPTIMIZE,OTA and OTA BY OP,no,no,no,yes,"In some NW, AHO enabled is not configured by system information message. When signal is weak, access attempt may be fail. If MS enable AHO by itsself, NW sometimes can successfully establish the traffic. So we make this optimization.This SBP describes whether MS disable AHO optimization or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Vzw, MT call testing in poor signal",Pass,,,,
+6350,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[55].SBP_STATUS_VZW_1XRTT_SYSTEM_LOST_SEARCH_FOR_UOI_SR,modem_sbp_config[55].SBP_STATUS_VZW_1XRTT_SYSTEM_LOST_SEARCH_FOR_UOI_SR,OTA and OTA BY OP,no,no,no,yes,"Normally silent retry search will skip the current AC fail channel. But in some NW, there are not any other suitable channel. This will cause cell search slow. So we do system lost search as the optimization. This SBP describes whether MS do this optimization or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Vzw, MO call test in poor signal",Pass,,,,
+6351,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[46].SBP_STATUS_VZW_DATA_ENHANCEMENT,modem_sbp_config[46].SBP_STATUS_VZW_DATA_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"This SBP to control enable/disable data service special feature.<BR>Such as throttling, new options of Pdp Pco in VSNCP ppp packet: MTU_req, Pcocode, MccMnc, use CHAP authentication only for Simple IP, retry one more time on Mobile IP if last RRP error is admin-prohibited (129), retry Mobile IP RRP with 0 home-address if last RRP error is admin-prohibited (129), etc.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,N/A,MD Config,Modem - Customer Requirement,,,VZW data test,Pass,,,,
+6352,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_DISABLE_EVDO_SUSPEND_TIMING,modem_sbp_config[48].SBP_STATUS_VZW_DISABLE_EVDO_SUSPEND_TIMING,OTA,no,no,no,yes,This SBP describes that EVDO suspend timing is invalid or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]config susepnd time parameter in the connection close message.<BR>[Expected Result] AT response the susepnd time to AN in the connection close message.,Pass,,,,
+6353,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_E911,modem_sbp_config[47].SBP_STATUS_VZW_E911,Not Support,no,no,no,yes,"This is a serials of Multimode E911 releated features of c2k modem request by Vzw spec.<BR>If this feature is enabled, E911 call will tried among all the supported RATs until service is available to launch a E911 call .<BR>If this feature is not enabled, a E911 call can only be launch with a single RAT",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,(VzW) E911,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6354,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_VZW_FEMTOCELL_FEATURE,modem_sbp_config[49].SBP_STATUS_VZW_FEMTOCELL_FEATURE,OTA and OTA BY OP,no,no,no,yes,"Indicate whether the current system is in femtocell according to Verizon spec. When enable the SBP, AT will send 1xRTT or EVDO system in femtocell indicator URC.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]Report the VAL_CLC_CELL_INFO_MSG to VAL when EVDO camps on.<BR>[Expected Result]Report the VAL_CLC_CELL_INFO_MSG to VAL when EVDO camps on.,Pass,,,,
+6355,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_VZW_LTE_MMO_SCAN,modem_sbp_config[49].SBP_STATUS_VZW_LTE_MMO_SCAN,OTA and OTA BY OP,no,no,no,yes,This SBP describes that Rat change to LTE using MPSR manner when EVDO is in connected state is valid.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,EVDO,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step]EVDO sends CLC_ERRC_EVDO_PS_CONNECTION_STATUS_IND to LTE.<BR>[Expected Result]EVDO sends CLC_ERRC_EVDO_PS_CONNECTION_STATUS_IND to LTE.,Pass,,,,
+6356,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_LTE_SIB8_TIMING,modem_sbp_config[48].SBP_STATUS_VZW_LTE_SIB8_TIMING,OTA and OTA BY OP,no,no,no,yes,"When CDMA timing is not ready and LTE already read SIB8 info, it utilizes the CDMA-LTE timing relation in SIB8 to accelerate 1xRTT/EVDO cell search procedure.<BR>If this feature is enabled:<BR>- 1xRTT initial cell search may be faster if LTE read SIB8 info first.<BR>- EVDO standby Auto gap cell search may be faster if LTE read SIB8 info first.<BR>If this feature is disabled, the CDMA-LTE Timing relation will not be utilized and 1xRTT/EVDO cell search procedure works as usual.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,IRAT(C2K-LTE),OP Requirement,,,"Test in machine (Y/N): Y<BR> Test Time (minutes): 240<BR> [Init] power up, camp on LTE/1xRTT on SPRINT network<BR> [Test Step] start LTE->EVDO Irat measure<BR> [Expected Result] EVDO can find ncell with LTE SIB8 timing quickly",Pass,,,,
+6357,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_MEID_ME,modem_sbp_config[47].SBP_STATUS_VZW_MEID_ME,OTA and OTA BY OP,no,no,no,yes,"In C2K protocal, status request/response is used for mobile report some capbility to network. The MEID ME is one of mobile capbility. This SBP describes whether MS supports to report MEID ME in status response message to NW .",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,test case: C.S0073-B section 2.2.3,Pass,,,,
+6358,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_OTA,modem_sbp_config[47].SBP_STATUS_VZW_OTA,OTA BY OP,no,no,no,yes,"This SBP describes whether MS supports SIM cold reset after OTASP/AP or not. After OTASP/PA procedure, network will change contents of files in CSIM, modem should act SIM code reset to read files in UICC again and do power up registration follow power down registration.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:special procedure for VzW OTASP.,,,N/A,1xRTT,3G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 15<BR>[Init] download Gen97 load to phone<BR>[Test Step]<BR>1, Open MCF tool, <BR>2, Load MCF DB,<BR>3, Modify LID item, NVRAM_EF_SBP_MODEM_CONFIG_LID, GID:6300<BR>4, Generate OTA file<BR>5, Add OP-OTA tag<BR>6, Generate OP-OTA file,<BR>7, Put OTA/OP-OTA files to Android file system ,<BR>8, Open MTK EM mode (Telephony -> MCF -> Sim1/Sim2), then select OTA/OP-OTA files<BR>9. Check if value modified in OP-OTA file after reboot handset<BR>[Expected Result]<BR>value is changed as expected.",Pass,,,,
+6359,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_SMS,modem_sbp_config[47].SBP_STATUS_VZW_SMS,OTA BY OP,no,no,no,yes,"This SBP describes whether MS supports to keep traffic channel alive after transmit SMS done or not. If transmit SMS done, then release traffic channel, may cost much time for next MO SMS which come immediately. This feature will improve MO SMS efficient if there are manys SMS pending in AP side wait to send. Modem will keep traffic channel alive 6 seconds if there is no more SMS to be sent.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:special procedure for VZW SMS.,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6360,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[49].SBP_STATUS_VZW_SMS_BSP,modem_sbp_config[49].SBP_STATUS_VZW_SMS_BSP,Not Support,no,no,no,yes,This SBP describes whether the current project is LG BSP project while the operator is Verizon.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+6361,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_SMS_CMAS,modem_sbp_config[47].SBP_STATUS_VZW_SMS_CMAS,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+6362,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_SUPL,modem_sbp_config[48].SBP_STATUS_VZW_SUPL,Not Support,no,no,no,yes,"This SBP describes whether MS supports C2K SUPL feature or not. C2K SUPL AGPS has different IS801 messages to interact with network, which do position determination over SUPL.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support SUPL.,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6363,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[47].SBP_STATUS_VZW_TDO,modem_sbp_config[47].SBP_STATUS_VZW_TDO,Not Support,no,no,no,yes,"when 1X is not available, DO can not camp on NW for a period. which is required by Verizon/Sprint but other operators don't have the requirement. So this SBP is used to control when 1X is not available, whether DO can camp on a NW for a period or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,N/A,EVDO,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6364,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[48].SBP_STATUS_VZW_TX_CLOSELOOP,modem_sbp_config[48].SBP_STATUS_VZW_TX_CLOSELOOP,OTA and OTA BY OP,no,no,no,yes,"Indicate whether the "Tx power up faster and down slower" feature will be opened or not. For VZW, if "Tx power up faster and down slower" function set to True ,and if the power control bit indicates to up the tx power,it will add 3dB every time, but if the power control bit indicates to down the tx power,it will minus 3dB every time. Normally without this feature, tx power up and dowm with the same step by 1 dB.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,(VzW) CDMA-Less,OP Requirement,,,"Enter EVDO connect state,set 8960 instrument at all up Rpcbit or all down Rpcbit mode",Pass,,,,
+6365,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[54].SBP_STATUS_VZW_UNSOLICITED_LOCATION_NOTIFICATION,modem_sbp_config[54].SBP_STATUS_VZW_UNSOLICITED_LOCATION_NOTIFICATION,OTA and OTA BY OP,no,no,no,yes,"Normally MS only report location notification when received location Request. For VZW, if RANhandoff attributes set to True, MS need report a unsolicited location notification when PS data from "1x to evdo" or "evdo to evdo subnet change". This SBP describes whether MS support report a unsolicited location notification or not.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] evdo idle handoff to another subnetId cell<BR>[Expected Result] UE report a location_notification OTA message to network,Pass,,,,
+6366,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_STMSI_PAGING_ATTACK_HANDLING,modem_sbp_config[84].SBP_STMSI_PAGING_ATTACK_HANDLING,OTA and OTA BY OP,no,no,no,yes,"Purpose:The handling of UE sends service_request frequently because of receiving S-TMSI paging too frequently<BR>Scenario:When we detect UE sends service_request frequently because of receiving S-TMSI paging too frequently but we found network does not have any data to send us (if UE detects no data for observe_no_data_count during observe_no_data_period), we think these S-TMSI may be sent from fake cell, not for real cell. Then we will temp bar this cell for a short time (observe_no_data_bar_time) because we think this cell is attacking by fake cell (because fake cell sends many S-TMSI paging and cover the paging from real cell but UE's lower layer can not distinguish it) <BR>Usage:<BR>This feature has 4 configured setting in NVRAM_EF_ERRC_PERFORMANCE_PARA_LID.<BR>1. errc_detection_timer_2 (seconds): default value is 300s<BR>2. observe_no_data_count: default value is 2 (max:8, the max number of stored obesrved cell is 8)<BR>3. observe_no_data_period: 1200s (20mins, because it must > errc_no_data_detection_timer*observe_no_data_count). <BR>Meaning: if UE detects no data for observe_no_data_count during observe_no_data_period, we treat this cell may be attacked by s-tmsi paging from fake cell, so temp bar this real cell<BR>4.observe_no_data_bar_time: default value is 300s",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable the handling of S-TMSI paging attack.<BR>0:Disable the handling of S-TMSI paging attack.,,,This feature is controlled by __ENABLE_SBP_STMSI_PAGING_ATTACK_HANDLING__.,LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+6367,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[58].SBP_SUPPORT_A5_4,modem_sbp_config[58].SBP_SUPPORT_A5_4,OTA and OTA BY OP,no,no,no,yes,"The A5/4 algorithm is one of cipher modes used in GSM after the MS enters dedicated state and starts ciphering. If the MS support A5/4 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using A5/4.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Support for A5_4 is disabled.<BR>0:Support for A5_4 is enabled.,,,"This SBP is present under SBP feature flag __A54_ALGORITHM_SUPPORT_CAPABILITY__ which is used in setting the SBP valueThe feature is coded under __A54_ALGORITHM_SUPPORT__ flag which is used in enabling or disabling the feature.If this flag is not defined, irrespective of SBP feature, the complete feature gets disabled0 The A5/4 ciphering algorithm is not supported by UE1 The A5/4 ciphering algorithm is supported by UE",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6368,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_SUPPORT_GEA1,modem_sbp_config[79].SBP_SUPPORT_GEA1,OTA and OTA BY OP,no,no,no,yes,"The GEA1 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA1 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA1.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA1 Disabled<BR>0x01:GEA1 Enabled,,,This SBP is present under SBP feature flag __DISABLE_GEA1__ which is used in setting the SBP value,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA1 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6369,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_SUPPORT_GEA2,modem_sbp_config[87].SBP_SUPPORT_GEA2,OTA and OTA BY OP,no,no,no,yes,"The GEA2 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA2 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA2.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA2 Disabled<BR>0x01:GEA2 Enabled,,,This SBP is present under SBP feature flag __DISABLE_GEA2__ which is used in setting the SBP value,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA2 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6370,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_SUPPORT_GEA3,modem_sbp_config[87].SBP_SUPPORT_GEA3,OTA and OTA BY OP,no,no,no,yes,"The GEA3 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA3 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA3.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA3 Disabled<BR>0x01:GEA3 Enabled,,,This SBP is present under SBP feature flag __DISABLE_GEA3__ which is used in setting the SBP value,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA3 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6371,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_SUPPORT_GEA4,modem_sbp_config[79].SBP_SUPPORT_GEA4,OTA and OTA BY OP,no,no,no,yes,"The GEA4 algorithm is one of cipher modes used in GPRS after the MS enters transfer state and starts ciphering. If the MS support GEA4 algorithm, it will report this capability support on the CLASSMARK to the network and the network, if supports this cipher algorithm, may request the MS to start ciphering using GEA4.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:GEA4 Disabled<BR>0x01:GEA4 Enabled,,,"This SBP is present under SBP feature flag __GEA4_ALGORITHM_SUPPORT_CAPABILITY__ which is used in setting the SBP value. This SBP can be configured using feature flag __DISABLE_GEA4__.The feature is coded under __A54_ALGORITHM_SUPPORT__ flag which is used in enabling or disabling the feature.If this flag is not defined, irrespective of SBP feature, the complete feature gets disabled.",MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for GEA4 on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6372,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[78].SBP_SYNC_RAU,modem_sbp_config[78].SBP_SYNC_RAU,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:SYNC RAU would be applied for gemini interruptions inorder to sync the lost connection with the network<BR>0:SYNC RAU would not be applied for gemini interruptions inorder to sync the lost connection with the network,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6373,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_T3346_POWER_ON_RESTART,modem_sbp_config[19].SBP_T3346_POWER_ON_RESTART,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6374,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[19].SBP_T3402_POWER_ON_RESTART,modem_sbp_config[19].SBP_T3402_POWER_ON_RESTART,OTA and OTA BY OP,no,no,no,yes,"Since some operators may require, we provide the possibility to restart the T3402 timers that are not expired yet at modem power-on. If this SBP option is enable, UE will store the length of T3402 timer, the PLMN where UE updates the last T3402 value, expire time of T3402 timer, and the corresponding PLMN identity into non-volatile memory.<BR>Upon modem power-on, UE will check whether the expire time of a T3402 timer passes. If the expire time does not pass, UE will restart the T3402 timer with its remaining value (expire time - system time).",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Restart the T3402 timers that are not expired yet at modem power-on.<BR>0:Not restart the T3402 timers that are not expired yet at modem power-on.,,,This SBP option is enabled by compile option __SBP_T3402_POWER_ON_RESTART__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6375,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[22].SBP_T3402_STOP_WHEN_MANUAL_SELECT,modem_sbp_config[22].SBP_T3402_STOP_WHEN_MANUAL_SELECT,OTA and OTA BY OP,no,no,no,yes,"According to TS 24.301, if T3402 is running and UE stays in the same TAI that starts T3402, UE cannot perform registration until T3402 expiry. Spec does not considering if user try to do manual selection in this case. To improve the user experience, MTK provide a solution to regain normal service much faster. If this SBP is enabled and user does manaual selection, UE can stop T3402 and try to perform registration immediately. Otherwise, UE will wait until T3402 expiry and then perform registration.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Stop T3402 when manual selection.<BR>0:Disable. Spec behavior.,,,User could use compile option __SBP_T3402_STOP_WHEN_MANUAL_SELECT__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6376,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_TC01_ATP_TABLES,modem_sbp_config[17].SBP_TC01_ATP_TABLES,OTA,no,no,no,yes,"In TC01, ATP 's operation is different from MTK turnkey for adapting for TC01 architecture. If enabled, ATP will operate as using TC01 ATP tables for TC01 architecture. If disabled, ATP will operate for MTK turnkey by not using TC01 ATP tables.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,This feature is controlled by __TC01_IMS_SUPPORT__,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6377,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[34].SBP_TCM_ENABLE_INACTIVITY_TIMER,modem_sbp_config[34].SBP_TCM_ENABLE_INACTIVITY_TIMER,OTA and OTA BY OP,no,no,no,yes,"If a PDN exists for a long time without any data transmission (PDN is "inactive"), it may be better to deactivate it to save network resource.If this SBP is ON (1), the modem will start to monitor UL/DL data and deactivate "inactive" PDN.<BR>If there's no data on the bearer of PDN "A" for "inactivity timer" period (set by AT+EAPNSYNC), MD would trigger to deactivate PDN "A". But would not trigger if it PDN "A" is the last PDN in LTE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable Inactivity Timer feature<BR>0:Disable Inactivity Timer feature,,,The SBP would be turned ON if the compile option __TCM_ENABLE_INACTIVITY_TIMER__ is defined.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6378,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[57].SBP_TCM_IMS_ROAMING_ALWAYS_ON,modem_sbp_config[57].SBP_TCM_IMS_ROAMING_ALWAYS_ON,OTA and OTA BY OP,no,no,no,yes,To pretend UE to support IMS-Roaming in TCM and PAM (protocol modules) modules for testing. The real support of IMS-Roaming still depends on IMS modules.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If this PDN does not support PS DATA OFF, the UE will run PS DATA OFF logic on this PDN<BR>0:If this PDN does not support PS DATA OFF, the UE will not run PS DATA OFF logic on this PDN. The UE runs the existing MTK data off logic.",,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6379,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[23].SBP_TCM_QOS_SIG_IND_ENABLED,modem_sbp_config[23].SBP_TCM_QOS_SIG_IND_ENABLED,OTA and OTA BY OP,no,no,no,yes,"To enable auto set Signaling-Indication flag in Requested QoS when defining PDN as an IMS PDN via AT+CGDCONT ( &IM_CN_Signalling_Flag_Ind& == 1 ).<BR>While sending &Activate PDP context request& (Refer to 3GPP TS24.008 9.5.1), there are 2 parameters related to IMS<BR>(1) One is the &Requested QoS& -> Signalling Indication (Refer to 3GPP TS24.008 10.5.6.5)<BR>(2) Another is the &Protocol configuration options& -& &IM CN Subsystem Signaling Flag& (Refer to 3GPP TS24.008 Table 10.5.154)<BR>The (1) is configured by +CGEQREQ -& &Signalling indication& (Refer to 3GPP TS27.007 10.1.6)<BR>The (2) is configured by +CGDCONT -& &IM_CN_Signalling_Flag_Ind& (Refer to 3GPP TS27.007 10.1.1)<BR>When &IM_CN_Signalling_Flag_Ind& is configured as &1& (UE indicates that the PDP context is for IM CN subsystem-related signalling only), it is better to configure &Signalling indication& as &1& (DP context is optimized for signalling). However, since the 2 parameters are configured by 2 different AT command, it is possible that the 2 values are not both configured.<BR>It is better to keep the 2 configurations synced. To achieve this, when the SBP is enabled (1), if the &IM_CN_Signalling_Flag_Ind& == 1,<BR>the MOD_TCM will force to set Signalling Indication == 1.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Would auto set Signaling-Indication flag in Requested QoS when defining one PDN as an IMS PDN ( \<IM_CN_Signalling_Flag_Ind\> == 1 )<BR>0:Not auto set Signaling-Indication flag in Requested QoS when defining one PDN as an IMS PDN ( \<IM_CN_Signalling_Flag_Ind\> == 1 ),,,The SBP would be turned ON if the compile option __TCM_QOS_SIG_IND_ENABLED__ is defined.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6380,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[77].SBP_TDD_ECSFB_AVOID_LU_FAIL_CELLS,modem_sbp_config[77].SBP_TDD_ECSFB_AVOID_LU_FAIL_CELLS,OTA and OTA BY OP,no,no,no,yes,"This feature provide optimization for ECSFB feature when UE work under LtCTG world mode. During CSFB from LTE, RRM will avoid selection to cells on which previously CSFB failed due to LU attempt failure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,Feature require compile option __TDD_ECSFB_AVOID_LU_FAIL_CELLS__ to be defined and SBP will be enabled.,,,,,,Untested,,,,
+6381,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[25].SBP_TERMINAL_CAPABILITY_FLEX,modem_sbp_config[25].SBP_TERMINAL_CAPABILITY_FLEX,OTA,no,no,no,yes,"Decide UICC-CLF interface support in "TERMINAL CAPABILITY" command based on ATR reported by SIM.<BR>Different TERMINAL CAPABILITY command:<BR>- a. TLV "82 01 01" contained in TERMINAL CAPABILITY command (ME supports UICC-CLF interface)<BR>- b. TLV "82 01 00" contained in TERMINAL CAPABILITY command (ME does not support UICC-CLF interface)<BR>If UICC-CLF interface supported is indicated in ATR (global interface bytes), command 'a' will be sent to SIM. Otherwise, command 'b' will be sent to SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,The setting of this SBP could be set to "enable" by defining compile option __TERMINAL_CAP_FLEX__ in the makefile,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6382,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[39].SBP_TFTLIB_PF_REALLOC,modem_sbp_config[39].SBP_TFTLIB_PF_REALLOC,OTA and OTA BY OP,no,no,no,yes,"To avoid unnecessary memory consumption, the MTK modem allocates limited memory for packet filters (static allocated memory address). When the number of packet filter increases and the limited memory cannot store all packet filters, the extra packet filters will be stored in the dynamically allocated memory address. In this case, if the packet filters in the static allocated memory are deleted, there are two options for the MTK design:<BR>- Option 1: The packet filters in the dynamically allocated memory address are moved (re-allocated) to the static memory address (where the previous packet filter are deleted). Then the dynamic allocated memory address will be released.<BR>- Option 2: The packet filters in the dynamically allocated memory address won't be moved to static memory address (i.e., the dynamic allcated memory cannot be released). <BR>We create this SBP to control the packet filter memory re-allocation policy. The value of the SBP is described in the following table.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If the memory address of packet filter is dynamically allocated, the packet filter will be re-allocated to static memory address if the static memory address is available.<BR>0:The packet fileters in the dynamic memory address will not be moved (re-allocated) to static memory address.",,,N/A,R15 baseline 5G,5G Baseline,,,Test in machine (N) <BR>[Init] <BR>Read NVRAM.<BR> [Expected Result]<BR>modem_sbp_config[39].SBP_TFTLIB_PF_REALLOC is NOT in NVRAM.,Pass,,,,
+6383,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[37].SBP_TFT_UL_PF_CHECK,modem_sbp_config[37].SBP_TFT_UL_PF_CHECK,OTA and OTA BY OP,no,no,no,yes,"In 3GPP 24.301 CR1938, the UE will check the TFT in the request message for different types of TFT IE errors. When the resulting TFT does not contain any packet filter which applicable for the uplink direction, the UE will reject the activation request with ESM cause #44 "semantic errors in packet filter(s)".<BR>We create this SBP to enable/disable the uplink packet filter check. The value of the SBP is described in the following table.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If the uplink packet filter does not exist in the resulting TFT, UE will reply with ESm case #44 "semantic errors in packet fitler(s)"<BR>0:The UE will not check if the uplink packter fitler existes in the resulting TFT.",,,N/A,R15 baseline 5G,5G Baseline,,,Test in machine (N) <BR>[Init] <BR>Read NVRAM.<BR> [Expected Result]<BR>modem_sbp_config[37].SBP_TFT_UL_PF_CHECK is NOT in NVRAM.,Pass,,,,
+6384,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_THROTTLE_COUNTER_RESET_EXEMPTION,modem_sbp_config[35].SBP_THROTTLE_COUNTER_RESET_EXEMPTION,OTA and OTA BY OP,no,no,no,yes,"This SBP is to pass some VZW test cases related to data retry. If the feature is disabled, the throttling counter will be reset when PDN connection is established. Otherwise, under some conditions, the throttling counter will not be reset when PDN connection is established. These conditions include UE determines the previous PDN connection established, but RA (Router Advertisement) initiation or refreshment is error, or no P-CSCF.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Disabled<BR>0x00:Enabled,,,we could define the compile option __SBP_THROTTLE_COUNTER_RESET_EXEMPTION__ in the makefile to set the setting as enabled by default.,MD Config,Modem - Customer Requirement,,,Legacy Feature,Pass,,,,
+6385,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_TIN_DELETE_NOT_USE_MAPPED_GUTI,modem_sbp_config[70].SBP_TIN_DELETE_NOT_USE_MAPPED_GUTI,OTA and OTA BY OP,no,no,no,yes,"If the Mobile ID in ATTACH REQ is a mapped-GUTI whose source P-TMSI is got from other device, NW may reject ATTACH REQ from UE.<BR>MTK provides a workaround solution. If this SBP is enabled, UE will not use the mapped GUTI as Mobile ID in ATTACH REQ when TIN is deleted.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Do not use mapped GUTI to attach when TIN is deleted.<BR>0:Disable. Can use mapped GUTI to attach when TIN is deleted.,,,User could use compile option __DISABLE_LTE_TIN_DELETE_NOT_USE_MAPPED_GUTI__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6386,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[70].SBP_TIN_DELETE_USE_IMSI,modem_sbp_config[70].SBP_TIN_DELETE_USE_IMSI,OTA and OTA BY OP,no,no,no,yes,"There is a scenario that only GUTI existed in EPSLOCI file and TIN is deleted.(The SIM card may inserted in different device.) If UE use the GUTI as Mobile ID in ATTACH REQ, the MT call may relay to CS by network. This is a problem existed in some operators as "Dual Domain registration".<BR>MTK provides a workaround solution. If this SBP is enabled, UE will use the IMSI as Mobile ID in ATTACH REQ when TIN is deleted.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Use IMSI for ATTACH REQ when TIN is deleted.<BR>0:Disable. Will not directely use IMSI for ATTACH REQ when TIN is deleted.,,,User could use compile option __ENABLE_LTE_TIN_DELETE_USE_IMSI__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6387,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[16].SBP_TMOUS_VOLTE_FT,modem_sbp_config[16].SBP_TMOUS_VOLTE_FT,OTA and OTA BY OP,no,no,no,yes,"When this SBP is turn on, UE can trigger early radio link failure when UL/DL transmission is not good to avoid VoLTE call drop.<BR>- If UE can trigger early radio link failure, it could have more chance re-establishment success.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE can trigger early radio link failure during VOLTE call<BR>0:UE can not trigger early radio link failure,,,Default on when with compile option __TMOUS_VOLTE_FT__.,IMS,IMS,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6388,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_TMO_ECC_NOTIFICATION_ENABLE,modem_sbp_config[3].SBP_TMO_ECC_NOTIFICATION_ENABLE,OTA and OTA BY OP,no,no,no,yes,"For T-Mobile US Emergency Call Notification requirement. when this SBP is enabled ,USSD will be supported when ECC is ongoing but integrity is off while device is in UMTS RAT.<BR>This feature is to allow UE to perform USSD when ECC is ongoing and integrity is off in UMTS.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:Disable Modem will not actively control the RAT mode, but listen to the setting from AT command or NVRAM.<BR>0x1:Enable. Modem will actively control the RAT mode. The setting from AT command is ignored .",,,"To enable this feature, compile option __TMO_ECC_NOTIFICATION_ENABLE__ must be defined",MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6389,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[6].SBP_TMO_GBA,modem_sbp_config[6].SBP_TMO_GBA,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
+6390,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[8].SBP_TMO_IRAT_SET_ACTIVE_FLAG,modem_sbp_config[8].SBP_TMO_IRAT_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,This SBP is for UE to set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE will set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G.<BR>0:Disabled. UE will not set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G.,,,User could use compile option __TMO_IRAT_SET_ACTIVE_FLAG__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6391,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[2].SBP_TMO_PLMN_MATCHING,modem_sbp_config[2].SBP_TMO_PLMN_MATCHING,OTA and OTA BY OP,no,no,no,yes,"In Seattle, T-Mobile network configures 2G/3G network with 31026F and 310260, but two networks are not matched according to TS 23.122 matching rule. In order to prevent this issue of network configuration, add a customizable equivalent PLMN array to treat both as equivalent.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __TMO_PLMN_MATCHING__.,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6392,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[7].SBP_TMO_REMOTE_SIM_LOCK,modem_sbp_config[7].SBP_TMO_REMOTE_SIM_LOCK,Not Support,no,no,no,yes,This feature is used to enable/disable the Removte SIM-ME Lock feature required by T-Mobile.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __TMO_SIM_LOCK__ flag,(TMO) SIM-ME Lock,OP Requirement,,,covered by SBP framework UT/IT result,Untested,,,,
+6393,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[95].SBP_TREAT_PLMN_FROM_IMSI_IN_OPLMN_AS_EHPLMN,modem_sbp_config[95].SBP_TREAT_PLMN_FROM_IMSI_IN_OPLMN_AS_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"If EHPLMN presents and does not contain the PLMN of IMSI, we would treat the PLMN of IMSI as HPLMN only when OPLMNs contains this PLMN of IMSI too.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature can be enabled by compile option __TREAT_PLMN_FROM_IMSI_IN_OPLMN_AS_EHPLMN__,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6394,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[94].SBP_TRIGGER_AFR_AFTER_RLF,modem_sbp_config[94].SBP_TRIGGER_AFR_AFTER_RLF,OTA and OTA BY OP,no,no,no,yes,"This is a feature in which when CSFB call triggered in 2G and RLF happens, then 2G will trigger AFR to higher RAT.There will be no call re-establishment triggered in 2G after RLF when this SBP will be on due to AFR triggered. In non CSFB call case, this SBP has no impact on re-establishment and higher layer can still trigger re-establishment after RLF.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. AFR shall be triggered after 2G CSFB call failed due to RLF.<BR>0:Disable. AFR shall not be triggered after 2G CSFB call failed due to RLF.,,,"if compile option __TRIGGER_AFR_AFTER_RLF__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6395,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[99].SBP_TRIGGER_ATTACH_WITH_IMSI,modem_sbp_config[99].SBP_TRIGGER_ATTACH_WITH_IMSI,OTA and OTA BY OP,no,no,no,yes,"When the previous registered RAT was 4G and new RAT MODE setting supports 3G, In this scenario when SBP_TRIGGER_ATTACH_WITH_IMSI is enabled<BR>the GMM_ATTACH_REQUEST in 3G shall be attempted with MS Identity as IMSI even though UE has valid PTMSI.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0:If disable, GMM trigger ATTACH REQEUST in 3G as per spec<BR>0x1:If enable, GMM trigger ATTACH REQUEST in 3G with MS Identity as IMSI even though UE has valid PTMSI",,,This SBP can be controlled by compile option __TRIGGER_ATTACH_WITH_IMSI__,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] Bootup up device <BR>[Test Step] <BR>1. Perform registration on LTE.<BR>2. Change RAT mode to 3G only. <BR><BR>[Expected Result] <BR>GMM trigger Attach with IMSI as MS identity,Pass,,,,
+6396,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[100].SBP_TRIGGER_GPRS_DETACH_WITH_POWER_OFF_ON_SIM_DISABLED,modem_sbp_config[100].SBP_TRIGGER_GPRS_DETACH_WITH_POWER_OFF_ON_SIM_DISABLED,OTA and OTA BY OP,no,no,no,yes,"When AT+ESIMPOWER = 10 (SIM disabled) has been received and SBP SBP_TRIGGER_GPRS_DETACH_WITH_POWER_OFF_ON_SIM_DISABLED<BR>is enabled then MM will handle this scenario as SIM DISABLED, but POWER OFF GPRS DETACH REQUEST will be sent instead of<BR>Normal GPRS DETACH REQUEST.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:When AT+ESIMPOWER =10 (SIM disabled) has been received, Modem behaves as SIM DISABLE but perform as POWER_OFF_GPRS_DETACH_REQUEST.<BR>0:When AT+ESIMPOWER =10 (SIM disabled) has been received, Modem behaves as SIM DISABLE but perform as normal GPRS DETACH REQUEST.",,,This SBP can be controlled by compile option __TRIGGER_GPRS_DETACH_WITH_POWER_OFF_ON_SIM_DISABLED__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6397,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_TRY_RACH_BAR_CELL_DURING_STORE_LIST,modem_sbp_config[79].SBP_TRY_RACH_BAR_CELL_DURING_STORE_LIST,Not Support,no,no,no,yes,Try to camp on RACH fail bar cell during store list plmn search,BIT,1,,1,,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not support<BR>1:support,,,"if compile option __TRY_RACH_BAR_CELL_DURING_STORE_LIST__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6398,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[59].SBP_T_PLUS_W,modem_sbp_config[59].SBP_T_PLUS_W,Not Support,no,no,no,yes,Modem can automatically change duplex mode by AT+ERAT setting.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,The setting of this SBP could be set to "enable" by defining compile option __T_PLUS_W__ in the makefile,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6399,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[85].SBP_UDC,modem_sbp_config[85].SBP_UDC,OTA and OTA BY OP,no,no,no,yes,Enable Uplink Data Compression(UDC).<BR>The SBP works only when the setting nvram_errc_capa_pdcp_param_v1530_struct/supported_udc is 0x01(TRUE) in the NVRAM_EF_UE_EUTRA_CAP_CSFB_LID.,BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6400,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[60].SBP_UECAP_SIZE_DYNAMIC_ADJUST,modem_sbp_config[60].SBP_UECAP_SIZE_DYNAMIC_ADJUST,OTA and OTA BY OP,no,no,no,yes,"Dynamic UE Capability Size Adjustment.<BR>- If the network ask UE for UE capability repeatedly and no LTE service, UE will reduce the capability size reported to the network.<BR>- Some network cannot accept UE capability with large size and let UE attaching failed. To deal with this situation, MTK UE will reduce the number of supported CA combination or disable CA to lessen the size of UE capability.<BR>- If number of CA combination is reduced, some CA combination will not be supported.<BR>- #CA combination will be reduced according to CUSTOM_EUTRA_WHITE_LIST_CABC_CFG in custom_eas_config.c",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:support<BR>0:not support,,,CMCC CA combination whitelist is set in default.Please make sure that the custom configuration is correct in CUSTOM_EUTRA_WHITE_LIST_CABC_CFG in custom_eas_config.c,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6401,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[87].SBP_UL1D_CS_CS3_THD_DOCOMO_EN,modem_sbp_config[87].SBP_UL1D_CS_CS3_THD_DOCOMO_EN,OTA and OTA BY OP,no,no,no,yes,This SBP feature option is used to enable CS3 threshhold increase by 2db.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:enable<BR>bit 0:disable,,,N/A,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N) :Y<BR> Test Steps:<BR> Step1: Power on UE (AT)<BR> Step2: Start U-Plane by UE/NW<BR> Step3: The U-Plane is connected successfully.<BR> Step4: Power up WCDMA2 for radio link addition<BR> Step5: Power up WCDMA3 for radio link addition<BR> Step6: Power down WCDMA3 for radio link replacement<BR> Step7: Power up WCDMA4 for radio link replacement,Pass,,,,
+6402,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[71].SBP_UL1D_CS_TRIGGER_EXTEND_RLF_EN,modem_sbp_config[71].SBP_UL1D_CS_TRIGGER_EXTEND_RLF_EN,OTA and OTA BY OP,no,no,no,yes,This SBP feature option is used to enable trigger of Extend RLF.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This SBP could be enabled by defining compile option __KOR_CUSTOMIZATION__ in the makefile,WCDMA Protocol (R8 Baseline),3G,,,Not possible.,Untested,,,,
+6403,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_UMAC_TVM_DECREASE_TRANSMITTED,modem_sbp_config[12].SBP_UMAC_TVM_DECREASE_TRANSMITTED,OTA and OTA BY OP,no,no,no,yes,Decrease TVM value by data transmitted in current TTI. SBP for internal test only,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. it will decrease TVM for the data transmitted in currnet TTI.<BR>0:Disabled. The TVM will not decrease data volumn transmitted in current TTI.,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for 3g Data on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6404,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[12].SBP_UMAC_TVM_FAVOR_POW_PERF,modem_sbp_config[12].SBP_UMAC_TVM_FAVOR_POW_PERF,OTA and OTA BY OP,no,no,no,yes,Used to reduce power consumption by decreasing TVM value.SBP for internal test onlyy,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. it will decrease TVM for the data transmitted in currnet TTI in DCH.<BR>0:Disabled. The TVM will not decrease data volumn transmitted in current TTI in DCH.,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine : (Y) <BR> Test Time (10) <BR> [Init] GCF Testcases for 3g Data on Anite<BR> [Test Step] <BR> [Expected Result],Pass,,,,
+6405,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[0].SBP_UMTS_CB_OFF,modem_sbp_config[0].SBP_UMTS_CB_OFF,OTA and OTA BY OP,no,no,no,yes,TURN_OFF Cell Broadcast in UMTS network.<BR>Enable this feature means UMTS cell broadcast is turned off.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:Disable this feature means UMTS cell broadcase will be usual way<BR>0x1:Enable this feature means UMTS cell broadcast is turned off.,,,"To enable this feature, compile option __3G_CB_OFF__ must be defined.",WCDMA Protocol (R8 Baseline),3G,,,NA,Pass,,,,
+6406,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[93].SBP_UNCOMP_CNTXT_USE_IR,modem_sbp_config[93].SBP_UNCOMP_CNTXT_USE_IR,OTA and OTA BY OP,no,no,no,yes,Always use IR while uncompressed context is selected.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes): 10<BR><BR>[Init] <BR>Attach to LTE and IMS PDN is activated. VoLTE icon is available.<BR><BR>[Test Step] <BR>1. Start and keep VoLTE call, and do cell handover many times<BR><BR>[Expected Result]<BR>ROHC sends IR packet when using ROHC uncompressed profile <BR> for ROHC compression. This can be found in L2 trace. E.g.,<BR><BR>[ROHC-C][CNTXT] (cid 0, profile_id 0x0) is created for rb_idx 2 <BR>[ROHC-C][PKT] rohc_c_pt: 1, pt_ext: -1 [1:IR 14:UO0 18:UOR2 21:R0]<BR><BR>profile_id 0x0 represents ROHC uncompressed profile<BR>rohc_c_pt 1 represents IR packet",Pass,,,,
+6407,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[79].SBP_UPDATE_CFU_ICON,modem_sbp_config[79].SBP_UPDATE_CFU_ICON,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+6408,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_UPDATE_SIB19_INFO,modem_sbp_config[42].SBP_UPDATE_SIB19_INFO,OTA and OTA BY OP,no,no,no,yes,Notify AP upon identifying that UE has read/not read SIB19.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6409,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[42].SBP_URC_UMTS_PS_RAB_STATUS,modem_sbp_config[42].SBP_URC_UMTS_PS_RAB_STATUS,OTA,no,no,no,yes,This SBP is to control the support for PS RAB status URC +EPSRDS to AP.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,N/A,,,,,"After UE registering, check whether AP behaves normally",Pass,,,,
+6410,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_GMM_PROC_WHEN_ABNORMAL_T3302_RUNNING,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_GMM_PROC_WHEN_ABNORMAL_T3302_RUNNING,OTA and OTA BY OP,no,no,no,yes,ATT CDR-DAM-1615. Handling of Timers Upon Reception of Request for Service From Higher Layers. User request not trigger ATTACH or RAU in attempt-to-update state and T3302 running.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:User trigger ATTACH or RAU in attempt-to-update state and T3302 running<BR>1:User request not trigger ATTACH or RAU in attempt-to-update state and T3302 running .,,,N/A,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6411,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_MM_PROC_WHEN_ABNORMAL_T3212_RUNNING,modem_sbp_config[17].SBP_USER_REQ_NOT_INIT_MM_PROC_WHEN_ABNORMAL_T3212_RUNNING,OTA and OTA BY OP,no,no,no,yes,"This SBP control whether UE can trigger LU in attempt-to-update state and T3212 running. Enable this SBP will not allow to trigger LU in MM Attempting to update and T3212 is running.<BR>This SBP is set to TRUE to pass the ATT CDR-DAM-310. According to this test case : if the device was in one of the following MM/GMM states and their corresponding timers are still active, the device shall respect these states for those LAI/RAI and only perform the corresponding MM/GMM procedure once this states have been exited or a different LAI/RAI is selected:<BR>- a.MM-IDLE sub-state ATTEMPTEDING-TO-UPDATE - Timer T3212.<BR>- b.GMM-DEREGISTERED.ATTEMPTING-TO-ATTACH - Timer T3302.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE will not trigger LU when MM is in attempting to update state and T3212 running<BR>0:UE will trigger LU when MM is in attempting to update state and T3212 running,,,N/A,WCDMA Protocol (R8 Baseline),3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6412,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[88].SBP_USE_IMSI_IN_EMERGENCY_ATTACH,modem_sbp_config[88].SBP_USE_IMSI_IN_EMERGENCY_ATTACH,OTA and OTA BY OP,no,no,no,yes,"When perform Emergency Attach procedure, which identity is carried in EPS mobile identity IE is according to 3GPP TS24.301 5.5.1.2.2. However, some operators require UE to carry IMSI even there is valid GUTI exist as long as SIM is valid. Hence, this SBP option provide the functionality to skip TS24.301 logic, and carry SIM forcely.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disabled.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6413,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_USE_RESTRICTIVE_SYSTEM_MATCH_FEATURE,modem_sbp_config[51].SBP_USE_RESTRICTIVE_SYSTEM_MATCH_FEATURE,Not Support,no,no,no,yes,"Sprint requirement: <BR>- restrictive match is enabled, must check band is matched when validate a C2K system.<BR>- restrictive match is disabled, need not check band is matched when validate a C2K system.<BR>This SBP is used to contrl whether support this feature or not",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6414,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[4].SBP_USE_SM_QOS_SUBSCRIBED,modem_sbp_config[4].SBP_USE_SM_QOS_SUBSCRIBED,OTA and OTA BY OP,no,no,no,yes,This feature shall allow UE to use Subscribed QoS or MTK default QoS setting.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE shall use subscribed values(0x00) for all QoS params<BR>0:UE shall use MTK default QoS setting (sdu_error_ratio=4; reliability_class=3; delivery_order=2; Rest all values as subscribed),,,This feature is controlled by __USE_SM_QOS_SUBSCRIBED__.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6415,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[3].SBP_USIM_CSP_SUPPORT,modem_sbp_config[3].SBP_USIM_CSP_SUPPORT,OTA,no,no,no,yes,"Support reading AT&T proprietary USIM CSP file, EF_U_CSP. The file path is 7FFF\6F15.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is turned ON by __U_CSP_SUPPORT__,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6416,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[38].SBP_VDM_ADS_ECMP_SET_TO_WLAN,modem_sbp_config[38].SBP_VDM_ADS_ECMP_SET_TO_WLAN,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6417,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[29].SBP_VDM_CONVERT_ATD_TO_ATDE_FOR_ECC_CHECK,modem_sbp_config[29].SBP_VDM_CONVERT_ATD_TO_ATDE_FOR_ECC_CHECK,Not Support,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6418,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[35].SBP_VDM_DELAY_RESUME_ADS_FOR_CELL_INFO,modem_sbp_config[35].SBP_VDM_DELAY_RESUME_ADS_FOR_CELL_INFO,Not Support,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6419,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_VDM_REDIAL_IMS_VT_TO_CS_VOICE,modem_sbp_config[13].SBP_VDM_REDIAL_IMS_VT_TO_CS_VOICE,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6420,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[28].SBP_VDM_REVERT_TO_CELLULAR_FOR_ECC,modem_sbp_config[28].SBP_VDM_REVERT_TO_CELLULAR_FOR_ECC,Not Support,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
6421,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[51].SBP_VOICE_ROAM_BARRING,modem_sbp_config[51].SBP_VOICE_ROAM_BARRING,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurevoice roam settingbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6422,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_DATA_SIM,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_DATA_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport the trigger of direct connection release when volte call ended on data SIMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6423,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_NONDATA_SIM,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_NONDATA_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureSupport the trigger of direct connection release when volte call ended on non-data SIMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6424,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_DATA_SIM,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_DATA_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNo trigger of further reestablishment when network ignores TRIGGER_RELEASE A2 on DATA SIMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,SBP_VOLTE_END_TRIGGER_NW_RELEASE_DATA_SIM,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6425,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_NONDATA_SIM,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_NONDATA_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNo trigger of further reestablishment when network ignores TRIGGER_RELEASE A2 on NON DATA SIMbit 0:0:Disabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,SBP_VOLTE_END_TRIGGER_NW_RELEASE_NONDATA_SIM,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6426,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_VPLMN_WITH_HPLMN_IN_EPLMN_AS_HIGHEST_PLMN,modem_sbp_config[63].SBP_VPLMN_WITH_HPLMN_IN_EPLMN_AS_HIGHEST_PLMN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureNot perform auto reselection if home PLMN is in Equivalent PLMN listbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-6427,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_VZW_INTERNATIONAL_ROAMING_REG,modem_sbp_config[53].SBP_VZW_INTERNATIONAL_ROAMING_REG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureDisable VzW international roaming registration featurebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Vzw test case:<BR>VZ_TC_GLOBALFIT_8323,Pass,,,,
-6428,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_VZW_PSW_BYPASS_BAD_SECTOR,modem_sbp_config[52].SBP_VZW_PSW_BYPASS_BAD_SECTOR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featurebypass bad sector in sync acq phase for VZW networkbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,"Vzw network, MO/MT call in poor signal",Pass,,,,
-6429,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_VZW_REFRESH_PROCEED_DURING_THE_CALL,modem_sbp_config[53].SBP_VZW_REFRESH_PROCEED_DURING_THE_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Featuretear down the current call and allow ISIM/USIM/CSIM refresh when it comesbit 0:0:Not enabledbit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-6430,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_VZW_REPORT_LTE_RS_SNR,modem_sbp_config[18].SBP_VZW_REPORT_LTE_RS_SNR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureReport VZW defined L1 filtered RSRPbit 0:0:LTE RSRP of LTE signal strength indicator according to conventional metricbit 1:1:LTE RSRP of LTE signal strength indicator according to VzW requirement",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:LTE RSRP of LTE signal strength indicator according to VzW requirement<BR>0:LTE RSRP of LTE signal strength indicator according to conventional metric,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6431,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_WAIT_RLC_ACK_FOR_RB_RELEASE,modem_sbp_config[72].SBP_WAIT_RLC_ACK_FOR_RB_RELEASE,Not Support,no,no,no,no,Configuration of SBP FeatureWait RLC ack for RB releasebit 0:0:Waitbit 1:1:Don't wait,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Wait for rlc ack<BR>0:Dont wait,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6432,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_WAIT_RRC_CONN_REL_FOR_SET_RAT_MODE,modem_sbp_config[24].SBP_WAIT_RRC_CONN_REL_FOR_SET_RAT_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWait for network to release RRC conn for set rat modebit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:It means that UE forcefully releases the RR connection to initating rat mode change procedure to access stratum<BR>0:It means that UE waits for RR connection to get released by network before initating rat mode change procedure to access stratum,,,,MD Config,Modem - Customer Requirement,,,1. Perform Data Services .<BR>2. Change the RAT mode .,Pass,,,,
-6433,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_WRAP_AROUND_INT_FAIL,modem_sbp_config[13].SBP_WRAP_AROUND_INT_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWhether to do re-attach when integrity check is failed for NAS messagebit 0:0:Disabled. Discard NAS message when integrity check failed.bit 1:1:Enabled. Discard NAS message and perform re-attach procedure when integrity check failed.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Discard NAS message and perform re-attach procedure when integrity check failed.<BR>0:Disabled. Discard NAS message when integrity check failed.,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6434,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_WW_SUPPORT_BAND_AND_CA_COMB_FILTER,modem_sbp_config[72].SBP_WW_SUPPORT_BAND_AND_CA_COMB_FILTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP FeatureWorldwide LTE support band and CA band combination filteringbit 0:0:Not Enabledbit 1:1:Enabled",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> UE filters out unnecessary LTE support band and CA band combination in the EUTRA Capability according to the worldwide LTE band and CA band combination database<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-6435,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_X2G_HO_START_CPHR_CR0585_ENABLE,modem_sbp_config[21].SBP_X2G_HO_START_CPHR_CR0585_ENABLE,OTA and OTA BY OP,no,no,no,yes,"This SBP is related to 3GPP CR number 0585. According to this 3GPP CR, if 3G in CS call, was not ciphered and network sent HANDOVER COMMAND TO GERAN message in which START CIPHER IE is received, then this HO should not be accepted and HO FAILURE needs be sent to NW.This SBP helps in deciding whether such HO(CIPHER IE received) to GERAN shall be accepted or rejected.<BR>This CR is by default supported and customer can turn off this CR by setting the SBP value to 0.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:this 3GPP CR shall be enabled,HO with cipher IE shall NOT be accepted if 3G call was not ciphered<BR>0:this 3GPP CR shall be disabled,HO with cipher IE shall be accepted even though 3G was not ciphered",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6422,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_DATA_SIM,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_DATA_SIM,OTA and OTA BY OP,no,no,no,yes,"In dual SIM case, UE could be state un-sync with network in a short period to miss next MT call due to peer SIM interrupting current RRC connection. This feature could prevents possible next MT call missing in such state un-sync short period for peer SIM interruption. The SBP eanble allows to trigger network to release connection when volte call ended on data SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,__SBP_VOLTE_END_TRIGGER_NW_RELEASE_DATA_SIM__,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6423,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_NONDATA_SIM,modem_sbp_config[84].SBP_VOLTE_END_TRIGGER_NW_RELEASE_NONDATA_SIM,OTA and OTA BY OP,no,no,no,yes,"In dual SIM case, UE could be state un-sync with network in a short period to miss next MT call due to peer SIM interrupting current RRC connection. This feature could prevents possible next MT call missing in such state un-sync short period for peer SIM interruption. The SBP eanble allows to trigger network to release connection when volte call ended on non-data SIM.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,__SBP_VOLTE_END_TRIGGER_NW_RELEASE_NONDATA_SIM__,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6424,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_DATA_SIM,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_DATA_SIM,OTA and OTA BY OP,no,no,no,yes,"In dual SIM case, UE could be state un-sync with network in a short period to miss next MT call due to peer SIM interrupting current RRC connection. This feature could prevents possible next MT call missing in such state un-sync short period for peer SIM interruption. The SBP eanble allows to trigger special connection reestablishment to release RRC connection on data SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,__SBP_VOLTE_END_TRIGGER_REEST_DATA_SIM__,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6425,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_NONDATA_SIM,modem_sbp_config[97].SBP_VOLTE_END_TRIGGER_REEST_NONDATA_SIM,OTA and OTA BY OP,no,no,no,yes,"In dual SIM case, UE could be state un-sync with network in a short period to miss next MT call due to peer SIM interrupting current RRC connection. This feature could prevents possible next MT call missing in such state un-sync short period for peer SIM interruption. The SBP eanble allows to trigger special connection reestablishment to release RRC connection on non-data SIM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,__SBP_VOLTE_END_TRIGGER_REEST_NONDATA_SIM__,L+L,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6426,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[63].SBP_VPLMN_WITH_HPLMN_IN_EPLMN_AS_HIGHEST_PLMN,modem_sbp_config[63].SBP_VPLMN_WITH_HPLMN_IN_EPLMN_AS_HIGHEST_PLMN,Not Support,no,no,no,yes,"If the SBP is on, consider the registered VPLMN as highest priority PLMN, if HPLMN / EHPLMN is present in EPLMN list of registered VPLMN when performing auto reselection. That is, UE will not perform auto reselection when UE registered on a VPLMN whose EPLMN list contains HPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: not support<BR>1: support,,,"if compile option __VPLMN_WITH_HPLMN_IN_EPLMN_AS_HIGHEST_PLMN__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+6427,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_VZW_INTERNATIONAL_ROAMING_REG,modem_sbp_config[53].SBP_VZW_INTERNATIONAL_ROAMING_REG,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable VzW international roaming registration feature.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This feature is controlled by __INTERNATIONAL_ROAMING_REG__.,MD Config,Modem - Customer Requirement,,,Vzw test case:<BR>VZ_TC_GLOBALFIT_8323,Pass,,,,
+6428,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[52].SBP_VZW_PSW_BYPASS_BAD_SECTOR,modem_sbp_config[52].SBP_VZW_PSW_BYPASS_BAD_SECTOR,OTA and OTA BY OP,no,no,no,yes,"This SBP describes the feature bypass bad sector in sync acq phase for VZW. Once declared a bad sector when accessing failure, 1xRTT shall limit to stay on this sector when system searching.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Vzw network, MO/MT call in poor signal",Pass,,,,
+6429,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[53].SBP_VZW_REFRESH_PROCEED_DURING_THE_CALL,modem_sbp_config[53].SBP_VZW_REFRESH_PROCEED_DURING_THE_CALL,OTA and OTA BY OP,no,no,no,yes,"This is a card refresh feature of C2K modem requested by VZW spec.<BR>If this feature is enabled, C2K modem will tear down the current call and allow ISIM/USIM/CSIM refresh when it comes.<BR>If this feature is disabled, C2K modem will not allow ISIM/USIM/CSIM refresh when a call is ongoing.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+6430,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[18].SBP_VZW_REPORT_LTE_RS_SNR,modem_sbp_config[18].SBP_VZW_REPORT_LTE_RS_SNR,OTA and OTA BY OP,no,no,no,yes,To enable serving LTE cell RSRP indication and RSRP-to-noise ratio(RS SNR) according to VzW requirement "VZ_REQ_LTEDATA_6763 for LTE signal strength indicator".,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:LTE RSRP of LTE signal strength indicator according to VzW requirement<BR>0:LTE RSRP of LTE signal strength indicator according to conventional metric,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
+6431,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_WAIT_RLC_ACK_FOR_RB_RELEASE,modem_sbp_config[72].SBP_WAIT_RLC_ACK_FOR_RB_RELEASE,Not Support,no,no,no,no,"When one signalling connection established, and if RB Release is received then send RB Release Complete and once RLC ACK received then only send CONN_REL_IND to NAS",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Wait for rlc ack<BR>0:Dont wait,,,"To enable this feature, compile option __DISABLE_WAIT_RLC_ACK_FOR_RB_RELEASE__ should not be defined",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6432,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[24].SBP_WAIT_RRC_CONN_REL_FOR_SET_RAT_MODE,modem_sbp_config[24].SBP_WAIT_RRC_CONN_REL_FOR_SET_RAT_MODE,OTA and OTA BY OP,no,no,no,yes,UE should wait NW to disconnect RR connection during set rat mode procedure,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:It means that UE forcefully releases the RR connection to initating rat mode change procedure to access stratum<BR>0:It means that UE waits for RR connection to get released by network before initating rat mode change procedure to access stratum,,,"To enable this feature, compile option __WAIT_RRC_CONN_REL_FOR_SET_RAT_MODE__ must be defined",MD Config,Modem - Customer Requirement,,,1. Perform Data Services .<BR>2. Change the RAT mode .,Pass,,,,
+6433,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[13].SBP_WRAP_AROUND_INT_FAIL,modem_sbp_config[13].SBP_WRAP_AROUND_INT_FAIL,OTA and OTA BY OP,no,no,no,yes,"Based on description in TS 24.301 4.4.4.2 - Integrity checking of NAS signalling messages in the UE:<BR>- Once the secure exchange of NAS messages has been established, the receiving EMM or ESM entity in the UE shall not process any NAS signalling messages unless they have been successfully integrity checked by the NAS. If NAS signalling messages, having not successfully passed the integrity check, are received, then the NAS in the UE shall discard that message.<BR>UE has to do integrity check when a security protected NAS message is received. And if integrity check process fails, UE shall discard that NAS message.<BR>In some rare scenario, Core network would behave abnormally and fail to generate a valid security protected NAS message. Every NAS messages received from the network under this circumstance would not pass the integrity check, thus UE could not obtain normal service from network.<BR>This feature is designed for UE to recover from above conditons. If this feature is enabled, when integirty check failure is detected, UE would delete security context and perform re-attach procedure. This behavior forces network to re-calculate and synchronize security context with UE, and UE shall be able to obtain normal service after attach procedure is finished.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Discard NAS message and perform re-attach procedure when integrity check failed.<BR>0:Disabled. Discard NAS message when integrity check failed.,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6434,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[72].SBP_WW_SUPPORT_BAND_AND_CA_COMB_FILTER,modem_sbp_config[72].SBP_WW_SUPPORT_BAND_AND_CA_COMB_FILTER,OTA and OTA BY OP,no,no,no,yes,"Some operators don't upgrade their legacy network equipments so that the full-sized UE Capability information of feature-rich mobile terminal cannot be stored completely by network node (e.g. MME). The consequence could be that UE fails to attach network or inter-RAT procedure (e.g. SRVCC Handover) cannot be triggered.<BR>To prevent this kind of interoperability problem, MTK maintains a LTE band database (mcu/custom/protocol/common/ps/custom_wwltedb.xls) according to worldwide LTE network deployment information. By the MCC or PLMN Identity on where the UE has camped, disallowed bands and corresponding CA band combinations are filtered accordingly so that the size of EUTRA Capability is smaller.<BR>Many internal (engineering) devices which keep all native LTE bands (more than fifteen) and corresponding CA band combinations supported by RF hardware and it would be better to keep this option on. Otherwise feel free to turn it off if your device had been customized to support regional LTE bands only.",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enabled ==> UE filters out unnecessary LTE support band and CA band combination in the EUTRA Capability according to the worldwide LTE band and CA band combination database<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+6435,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[21].SBP_X2G_HO_START_CPHR_CR0585_ENABLE,modem_sbp_config[21].SBP_X2G_HO_START_CPHR_CR0585_ENABLE,OTA and OTA BY OP,no,no,no,yes,"This SBP is related to 3GPP CR number 0585. According to this 3GPP CR, if 3G in CS call, was not ciphered and network sent HANDOVER COMMAND TO GERAN message in which START CIPHER IE is received, then this HO should not be accepted and HO FAILURE needs be sent to NW.This SBP helps in deciding whether such HO(CIPHER IE received) to GERAN shall be accepted or rejected.<BR>This CR is by default supported and customer can turn off this CR by setting the SBP value to 0.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:this 3GPP CR shall be enabled,HO with cipher IE shall NOT be accepted if 3G call was not ciphered<BR>0:this 3GPP CR shall be disabled,HO with cipher IE shall be accepted even though 3G was not ciphered",,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
6436,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,sbp_mode,sbp_mode,Not Support,no,no,no,no,"[MCF] SBP ID(Phase out, use NVRAM_EF_SBP_IDS_LID instead)",UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
6437,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config,modem_sbp_data_config,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data",UNSIGNED CHAR,62,62,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-6438,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[19].SBP_2G_FB_DECODE_INTV_IN_VM,modem_sbp_data_config[19].SBP_2G_FB_DECODE_INTV_IN_VM,OTA and OTA BY OP,no,no,no,yes,"2G FB/SB decode interval, number of frames between two FB/SB decode attempt.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Use MTK Default value (16 frames)<BR>0x02: Period:2 GSM TDMA frame<BR>0x01: Period:1 GSM TDMA frame,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6439,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[17].SBP_2G_PWR_SCAN_PRD_IN_VM,modem_sbp_data_config[17].SBP_2G_PWR_SCAN_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,2G power scan period in Virtual Mode.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x02: Period:2 GSM TDMA frame<BR>0x01: Period:1 GSM TDMA frame<BR>0x00:Use MTK Default value (51 or 102 frames),,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6440,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[18].SBP_2G_SCAN_NUM_PER_PRD_IN_VM,modem_sbp_data_config[18].SBP_2G_SCAN_NUM_PER_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,Number of frames to be scanned in virtual mode per period for 2G,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Use MTK Default value (4 or frames)<BR>0x02: Period:2 GSM TDMA frame<BR>0x01: Period:1 GSM TDMA frame,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6441,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[35].SBP_2G_STANDBY_MEAS_FB_DECODE_INTV_IN_VM,modem_sbp_data_config[35].SBP_2G_STANDBY_MEAS_FB_DECODE_INTV_IN_VM,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to give measurement configurations to GL1 by GSM RR when UE is camped on other than 2G RAT<BR> and other SIM is doing data transfer (current SIM is in virtual mode). In virtual mode, 2G cannot do continuous<BR> measurements, hence, measurement FB decode intervals (in frames) is provided to GL1 by GRR via SBP.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Use MTK default value 16 frames.<BR>2:2 GSM TDMA frames<BR>1:1 GSM TDMA frame,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6442,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[34].SBP_2G_STANDBY_MEAS_NUM_PER_PRD_IN_VM,modem_sbp_data_config[34].SBP_2G_STANDBY_MEAS_NUM_PER_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,"2G measurement length for 2G measurements in Virtual standby mode. <BR>This SBP is used to give measurement configurations to GL1 by GSM RR when UE is camped on other than 2G RAT and other SIM is doing data transfer (current SIM is in virtual mode). In virtual mode, 2G cannot do continuousmeasurements, hence, measurement length (in frames) is provided to GL1 by GRR via SBP.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Follow normal IDLE mode measurements (4 or 8 frames)<BR>2:2G can measure 4 frames in given frame period in standby state<BR>1:2G can measure 8 frames in given frame period in flight mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6443,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[33].SBP_2G_STANDBY_MEAS_PRD_IN_VM,modem_sbp_data_config[33].SBP_2G_STANDBY_MEAS_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to give measurement configurations to GL1 by GSM RR when UE is camped on other than 2G RAT and other SIM is doing data transfer (current SIM is in virtual mode). In virtual mode, 2G cannot do continuous measurements, hence, measurement period (in frames) is provided to GL1 by GRR via SBP.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Follow normal IDLE mode measurements (51 or 102 frames)<BR>2:2G can measure in every 102 frame period in standby state<BR>1:2G can measure in every 51 frame period in flight mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6445,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[29].SBP_BAR_CELL_RSRP_THRESHOLD,modem_sbp_data_config[29].SBP_BAR_CELL_RSRP_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data RSRP threshold (in dBm) to bar a RA failure cell",BIT,8,,8,0x46,NR15.R3.MD700.IVT.MP1MR3.MP,,0x3c:-60 dBm<BR>0x41:-65 dBm<BR>0x5A:-90 dBm<BR>0x4B:-75 dBm<BR>0x50:-80 dBm<BR>0x55:-85 dBm<BR>0x46:-70 dBm<BR>0x32:-50 dBm<BR>0x37:-55 dBm,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
-6446,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[28].SBP_BAR_CELL_SINR_THRESHOLD,modem_sbp_data_config[28].SBP_BAR_CELL_SINR_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSINR threshold (in dB) to bar a RA failure cell",BIT,8,,8,0x0a,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:-0 dB<BR>0x05:-5 dB<BR>0x0a:-10 dB<BR>0x0f:-15 dB<BR>0x28:-40 dB<BR>0x19:-25 dB<BR>0x1e:-30 dB<BR>0x23:-35 dB<BR>0x14:-20 dB,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
-6447,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[27].SBP_BAR_CELL_TIME,modem_sbp_data_config[27].SBP_BAR_CELL_TIME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataBar timer for the RA failure weak signal cell (in second)",BIT,8,,8,5,NR15.R3.MD700.IVT.MP1MR3.MP,,1~30:value in seconds,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
-6448,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[9].SBP_DATA_HIF_MTU_256BYTES_BASE,modem_sbp_data_config[9].SBP_DATA_HIF_MTU_256BYTES_BASE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataObsolete from all generations",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-6449,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[7].SBP_DATA_LTE_EDDA,modem_sbp_data_config[7].SBP_DATA_LTE_EDDA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Datadefine if UE supports LTE EDDA and with which periodical timer",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00 ~ 0x06,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter EDDA<BR> [Expected Result]<BR>Trigger EDDA,Pass,,,,
-6450,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[32].SBP_DATA_RUIM,modem_sbp_data_config[32].SBP_DATA_RUIM,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSBP_DATA_RUIMbit 0:0:0bit 1:1:1",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6451,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[31].SBP_DATA_SUPPORT_NAM_COUNT,modem_sbp_data_config[31].SBP_DATA_SUPPORT_NAM_COUNT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Datamodem of C2K rat supported NAM numberbit 1:1:1",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6452,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[0].SBP_DATA_VAMOS,modem_sbp_data_config[0].SBP_DATA_VAMOS,OTA and OTA BY OP,no,no,no,yes,"This feature is defined in 3GPP TS45.001 Ch.13(after R9). <BR>If the MS support VAMOS, the VAMOS level could be VAMOS-I or VAMOS-II. <BR>The MS will report its capability on the CLASSMARK to the network and the NW may assign channel mode with VAMOS mode.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Supported(Doc)<BR>2:VAMOS_2 Supported(Doc)<BR>1:VAMOS_1 Supported(Doc),,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-6454,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[16].SBP_ECBM_MODE_TIMER_MIN,modem_sbp_data_config[16].SBP_ECBM_MODE_TIMER_MIN,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataObsolete after UMOLY.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6455,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[15].SBP_ECBM_MODE_TIMER_SEC,modem_sbp_data_config[15].SBP_ECBM_MODE_TIMER_SEC,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataObsolete after UMOLY.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6457,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[40].SBP_EMERGENCY_CALLBACK_MODE,modem_sbp_data_config[40].SBP_EMERGENCY_CALLBACK_MODE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Dataconfigure the mode of emergency call back mode to determine if UE need to enter ECBM mode or not after ECC is terminatedbit 0:0:C2K will not enter ECBM mode after ECC is disconnectedbit 1:1:C2K will enter ECBM mode after ECC is disconnectedbit 2:2:C2K will not enter ECBM mode after ECC is disconnected in CHINA, BUT will enter ECBM mode after ECC is disconnected outside of CHINA",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-6463,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[14].SBP_EUTRAN_DISABLE_TD_TIMER_VALUE,modem_sbp_data_config[14].SBP_EUTRAN_DISABLE_TD_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataEUTRAN Disable TD timer value, N means N minutes while 255 means that we use the default value, high priority search period T.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6464,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[10].SBP_EUTRAN_DISABLE_TIMER_VALUE,modem_sbp_data_config[10].SBP_EUTRAN_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataEUTRAN Disable timer value, N means N minutes while 255 means that we use the default value 12 minutes.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-6465,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[6].SBP_GERAN_TO_EUTRAN_SUPPORT_IN_GERAN_PTM,modem_sbp_data_config[6].SBP_GERAN_TO_EUTRAN_SUPPORT_IN_GERAN_PTM,OTA and OTA BY OP,no,no,no,yes,"This feature is used to configure GERAN to E-UTRA support in GERAN packet transfer mode in MS Radio Access capability UE report this capability to network in MS Radio Access capability IE and based on UE capability value, Network will take further action.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00<BR>0x03:PS Handover to EUTRAN supported in addition to capabilities indicated by 0x01 and 0x10 (currently not supported)'<BR>0x02:CCN towards E-UTRAN, E-UTRAN Neighbour Cell measurement reporting and Network controlled cell reselectionto E-UTRAN supported in addition to capabilities indicated by '0x01'<BR>0x01:E-UTRAN Neighbour Cell measurements and MS autonomous cell reselection to E-UTRAN supported",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-6466,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[23].SBP_HVOLTE_MODE,modem_sbp_data_config[23].SBP_HVOLTE_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataDefault hVoLTE Modebit 0:0:hVoLTE SRLTE modebit 1:1:hVoLTE LTE only mode",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0-1,,,,(VzW) hVoLTE,OP Requirement,,,,Pass,,,,
-6467,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[4].SBP_IDC_802_ANT_ISOLATION,modem_sbp_data_config[4].SBP_IDC_802_ANT_ISOLATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSet antenna isolation between LTE and WiFibit 7:7:ANT_ISOLATION_7bit 8:8:ANT_ISOLATION_8bit 9:9:ANT_ISOLATION_9bit 10:10:ANT_ISOLATION_10bit 11:11:ANT_ISOLATION_11bit 12:12:ANT_ISOLATION_12bit 13:13:ANT_ISOLATION_13bit 14:14:ANT_ISOLATION_14bit 15:15:ANT_ISOLATION_15bit 16:16:ANT_ISOLATION_16bit 17:17:ANT_ISOLATION_17bit 18:18:ANT_ISOLATION_18bit 19:19:ANT_ISOLATION_19bit 20:20:ANT_ISOLATION_20bit 21:21:ANT_ISOLATION_21bit 22:22:ANT_ISOLATION_22bit 23:23:ANT_ISOLATION_23bit 24:24:ANT_ISOLATION_24",BIT,8,,8,0x0c,NR15.R3.MD700.IVT.MP1MR3.MP,,0x07~0x18,,,,MD Config,Modem - Customer Requirement,,,N/A (not use),Untested,,,,
-6468,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[5].SBP_IDC_DISABLE_CUSTOM,modem_sbp_data_config[5].SBP_IDC_DISABLE_CUSTOM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSet whether to apply MTK solution or notbit 0:0:WiFi sidelobe: not force, BT sidelobe: not force, Harmonic: not force, Intermodulation: not forcebit 1:1:WiFi sidelobe: force, BT sidelobe: not force, Harmonic: not force, Intermodulation: not forcebit 2:2:WiFi sidelobe: not force, BT sidelobe: force, Harmonic: not force, Intermodulation: not forcebit 3:3:WiFi sidelobe: force, BT sidelobe: force, Harmonic: not force, Intermodulation: not forcebit 4:4:WiFi sidelobe: not force, BT sidelobe: not force, Harmonic: force, Intermodulation: not forcebit 5:5:WiFi sidelobe: force, BT sidelobe: not force, Harmonic: force, Intermodulation: not forcebit 6:6:WiFi sidelobe: not force, BT sidelobe: force, Harmonic: force, Intermodulation: not forcebit 7:7:WiFi sidelobe: force, BT sidelobe: force, Harmonic: force, Intermodulation: not forcebit 8:8:WiFi sidelobe: not force, BT sidelobe: not force, Harmonic: not force, Intermodulation: forcebit 9:9:WiFi sidelobe: force, BT sidelobe: not force, Harmonic: not force, Intermodulation: forcebit 10:10:WiFi sidelobe: not force, BT sidelobe: force, Harmonic: not force, Intermodulation: forcebit 11:11:WiFi sidelobe: force, BT sidelobe: force, Harmonic: not force, Intermodulation: forcebit 12:12:WiFi sidelobe: not force, BT sidelobe: not force, Harmonic: force, Intermodulation: forcebit 13:13:WiFi sidelobe: force, BT sidelobe: not force, Harmonic: force, Intermodulation: forcebit 14:14:WiFi sidelobe: not force, BT sidelobe: force, Harmonic: force, Intermodulation: forcebit 15:15:WiFi sidelobe: force, BT sidelobe: force, Harmonic: force, Intermodulation: force",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x0f,,,,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=>modem_sbp_data_config[5]->SBP_IDC_DISABLE_CUSTOM<BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] cause = %Mel1_rat_set_cause_enum, isConsysEnbl = %d, is LteStateChng = %d, idcEn =%d, InfDetectorEn = %d, customSbp =%d, GpsBlankEn =%d, R11FeatureEn =%d, direct path status =%d" <BR>=> (check :customSbp)",Pass,,,,
-6469,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[1].SBP_IDC_EN,modem_sbp_data_config[1].SBP_IDC_EN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataEnable IDC featurebit 0:0:IDC disablebit 1:1:IDC enable",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,__DISABLE_IDC__,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=>modem_sbp_data_config[1] -> SBP_IDC_EN<BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] cause = %Mel1_rat_set_cause_enum, isConsysEnbl = %d, is LteStateChng = %d, idcEn =%d, InfDetectorEn = %d, customSbp =%d, GpsBlankEn =%d, R11FeatureEn =%d, direct path status =%d"<BR><BR>=> (check: idcEn)",Pass,,,,
-6470,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[3].SBP_IDC_GPS_BLANK_EN,modem_sbp_data_config[3].SBP_IDC_GPS_BLANK_EN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataEnable GPS blanking featurebit 0:0:GPS_BLANK is disabledbit 1:1:GPS_BLANK is enabled",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,MT6739,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=> modem_sbp_data_config[3] -> SBP_IDC_GPS_BLANK_EN<BR><BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] cause = %Mel1_rat_set_cause_enum, isConsysEnbl = %d, is LteStateChng = %d, idcEn =%d, InfDetectorEn = %d, customSbp =%d, GpsBlankEn =%d, R11FeatureEn =%d, direct path status =%d"<BR><BR>=> (check: GpsBlankEn )",Pass,,,,
-6471,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[2].SBP_IDC_IM_LTE_TX_PWR,modem_sbp_data_config[2].SBP_IDC_IM_LTE_TX_PWR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSet LTE max Tx power when IDC is enabledbit 1:1:TX_PWR_1bit 2:2:TX_PWR_2bit 3:3:TX_PWR_3bit 4:4:TX_PWR_4bit 5:5:TX_PWR_5bit 6:6:TX_PWR_6bit 7:7:TX_PWR_7bit 8:8:TX_PWR_8bit 9:9:TX_PWR_9bit 10:10:TX_PWR_10bit 11:11:TX_PWR_11bit 12:12:TX_PWR_12bit 13:13:TX_PWR_13bit 14:14:TX_PWR_14bit 15:15:TX_PWR_15bit 16:16:TX_PWR_16bit 17:17:TX_PWR_17bit 18:18:TX_PWR_18bit 19:19:TX_PWR_19bit 20:20:TX_PWR_20bit 21:21:TX_PWR_21bit 22:22:TX_PWR_22bit 23:23:TX_PWR_23",BIT,8,,8,17,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01~0x17,,,,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=>modem_sbp_data_config[2] -> SBP_IDC_IM_TX_PWR<BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] nr_idc_power+backoff_ntf()" isWfScan =%d, isMdNeedPowerbackoff =%d, wifi_tragger_bmp =%d, bt_trigger_bmp =%d, band= %d, old TX power =%d, new TX power = %d"<BR>=> (check: isMdNeedPowerbackoff & old TX power & new TX power )",Pass,,,,
+6438,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[19].SBP_2G_FB_DECODE_INTV_IN_VM,modem_sbp_data_config[19].SBP_2G_FB_DECODE_INTV_IN_VM,OTA and OTA BY OP,no,no,no,yes,"This control GSM FB/SB decode interval, number of frames between two FB/SB decode attempt",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Use MTK Default value (16 frames)<BR>0x02: Period:2 GSM TDMA frame<BR>0x01: Period:1 GSM TDMA frame,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6439,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[17].SBP_2G_PWR_SCAN_PRD_IN_VM,modem_sbp_data_config[17].SBP_2G_PWR_SCAN_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,This control the GSM power scan period in virtual mode,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x02: Period:2 GSM TDMA frame<BR>0x01: Period:1 GSM TDMA frame<BR>0x00:Use MTK Default value (51 or 102 frames),,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6440,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[18].SBP_2G_SCAN_NUM_PER_PRD_IN_VM,modem_sbp_data_config[18].SBP_2G_SCAN_NUM_PER_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,This control the number of frames to be scanned in virtual mode per period in GSM,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Use MTK Default value (4 or frames)<BR>0x02: Period:2 GSM TDMA frame<BR>0x01: Period:1 GSM TDMA frame,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6441,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[35].SBP_2G_STANDBY_MEAS_FB_DECODE_INTV_IN_VM,modem_sbp_data_config[35].SBP_2G_STANDBY_MEAS_FB_DECODE_INTV_IN_VM,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to give measurement configurations to GL1 by GSM RR when UE is camped on other than 2G RAT and other SIM is doing data transfer (current SIM is in virtual mode). In virtual mode, 2G cannot do continuous measurements, hence, measurement FB decode intervals (in frames) is provided to GL1 by GRR via SBP.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Use MTK default value 16 frames.<BR>2:2 GSM TDMA frames<BR>1:1 GSM TDMA frame,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6442,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[34].SBP_2G_STANDBY_MEAS_NUM_PER_PRD_IN_VM,modem_sbp_data_config[34].SBP_2G_STANDBY_MEAS_NUM_PER_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to give measurement configurations to GL1 by GSM RR when UE is camped on other than 2G RAT and other SIM is doing data transfer (current SIM is in virtual mode). In virtual mode, 2G cannot do continuous measurements, hence, measurement length (in frames) is provided to GL1 by GRR via SBP.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Follow normal IDLE mode measurements (4 or 8 frames)<BR>2:2G can measure 4 frames in given frame period in standby state<BR>1:2G can measure 8 frames in given frame period in flight mode,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6443,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[33].SBP_2G_STANDBY_MEAS_PRD_IN_VM,modem_sbp_data_config[33].SBP_2G_STANDBY_MEAS_PRD_IN_VM,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to give measurement configurations to GL1 by GSM RR when UE is camped on other than 2G RAT and other SIM is doing data transfer (current SIM is in virtual mode). In virtual mode, 2G cannot do continuous measurements, hence, measurement period (in frames) is provided to GL1 by GRR via SBP.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Follow normal IDLE mode measurements (51 or 102 frames)<BR>2:2G can measure in every 102 frame period in standby state<BR>1:2G can measure in every 51 frame period in flight mode,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6445,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[29].SBP_BAR_CELL_RSRP_THRESHOLD,modem_sbp_data_config[29].SBP_BAR_CELL_RSRP_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"When UE RA error occurred on a weak signal cell,UE may bar this cell for SBP_BAR_CELL_TIME seconds.<BR>- when cell SINR <= SBP_BAR_CELL_SINR_THRESHOLD, and<BR>- cell RSRP <= SBP_BAR_CELL_RSRP_THRESHOLD.",BIT,8,,8,0x46,NR15.R3.MD700.IVT.MP1MR3.MP,,0x3c:-60 dBm<BR>0x41:-65 dBm<BR>0x5A:-90 dBm<BR>0x4B:-75 dBm<BR>0x50:-80 dBm<BR>0x55:-85 dBm<BR>0x46:-70 dBm<BR>0x32:-50 dBm<BR>0x37:-55 dBm,,,N/A,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
+6446,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[28].SBP_BAR_CELL_SINR_THRESHOLD,modem_sbp_data_config[28].SBP_BAR_CELL_SINR_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"When UE RA error occurred on a weak signal cell,UE may bar this cell for SBP_BAR_CELL_TIME seconds.<BR>- when cell SINR <= SBP_BAR_CELL_SINR_THRESHOLD, and<BR>- cell RSRP <= SBP_BAR_CELL_RSRP_THRESHOLD.",BIT,8,,8,0x0a,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:-0 dB<BR>0x05:-5 dB<BR>0x0a:-10 dB<BR>0x0f:-15 dB<BR>0x28:-40 dB<BR>0x19:-25 dB<BR>0x1e:-30 dB<BR>0x23:-35 dB<BR>0x14:-20 dB,,,N/A,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
+6447,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[27].SBP_BAR_CELL_TIME,modem_sbp_data_config[27].SBP_BAR_CELL_TIME,OTA and OTA BY OP,no,no,no,yes,"When UE RA error occurred on a weak signal cell,UE may bar this cell for SBP_BAR_CELL_TIME seconds.<BR>- when cell SINR <= SBP_BAR_CELL_SINR_THRESHOLD, and<BR>- cell RSRP <= SBP_BAR_CELL_RSRP_THRESHOLD.",BIT,8,,8,5,NR15.R3.MD700.IVT.MP1MR3.MP,,1~30:value in seconds,,,N/A,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter<BR> [Expected Result]<BR>Bar the cell,Pass,,,,
+6448,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[9].SBP_DATA_HIF_MTU_256BYTES_BASE,modem_sbp_data_config[9].SBP_DATA_HIF_MTU_256BYTES_BASE,Not Support,no,no,no,yes,,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+6449,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[7].SBP_DATA_LTE_EDDA,modem_sbp_data_config[7].SBP_DATA_LTE_EDDA,OTA and OTA BY OP,no,no,no,yes,"To define whether UE support eDDA and with which periodical timer(to query current power preference). <BR>If turn on EDDA, UE can include powerPrefIndicationConfig-r11 in UECapabilityInformation to NW.<BR> <BR>When UE is configured by RRCConnectionReconfiguration with powerPrefIndicationConfig, UE send UEAssistanceInformation(set powerPrefIndication) to NW according to TS36.331.",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00 ~ 0x06,,,"default 0x04, when both compile option __LTE_R11__ and __LTE_A_EDDA__ are defined.",LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Config the parameter EDDA<BR> [Expected Result]<BR>Trigger EDDA,Pass,,,,
+6450,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[32].SBP_DATA_RUIM,modem_sbp_data_config[32].SBP_DATA_RUIM,Not Support,no,no,no,yes,provide the way to config whehthe use real sim card or emulator card data in NVRAM to register network.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,"if want to use real sim card configuration, must keep the byte 1 of NVRAM_EF_C2K_UICC_LID is 0",1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6451,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[31].SBP_DATA_SUPPORT_NAM_COUNT,modem_sbp_data_config[31].SBP_DATA_SUPPORT_NAM_COUNT,OTA and OTA BY OP,no,no,no,yes,C2K supported NAM number.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6452,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[0].SBP_DATA_VAMOS,modem_sbp_data_config[0].SBP_DATA_VAMOS,OTA and OTA BY OP,no,no,no,yes,"This feature is defined in 3GPP TS45.001 Ch.13(after R9). If the MS support VAMOS, the VAMOS level could be VAMOS-I or VAMOS-II. The MS will report its capability on the CLASSMARK to the network and the NW may assign channel mode with VAMOS mode.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Supported(Doc)<BR>2:VAMOS_2 Supported(Doc)<BR>1:VAMOS_1 Supported(Doc),,,"The VAMOS_SUPPORT flag in makefile shall always be TRUE. (non-switchable) If VAMOS_SUPPORT set to FALSE, this VAMOS feature will be set to not support.",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+6454,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[16].SBP_ECBM_MODE_TIMER_MIN,modem_sbp_data_config[16].SBP_ECBM_MODE_TIMER_MIN,Not Support,no,no,no,yes,,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6455,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[15].SBP_ECBM_MODE_TIMER_SEC,modem_sbp_data_config[15].SBP_ECBM_MODE_TIMER_SEC,Not Support,no,no,no,yes,,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6457,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[40].SBP_EMERGENCY_CALLBACK_MODE,modem_sbp_data_config[40].SBP_EMERGENCY_CALLBACK_MODE,Not Support,no,no,no,yes,from customer's requirement: need to provide 3 options for the mode of ECBM.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+6463,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[14].SBP_EUTRAN_DISABLE_TD_TIMER_VALUE,modem_sbp_data_config[14].SBP_EUTRAN_DISABLE_TD_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"TS 23.122:<BR>If MS that has disabled its E-UTRA capability re-enables it when PLMN selection is performed, then the MS should, for duration of timer TD, memorize the PLMNs where E-UTRA capability was disabled as PLMNs where voice service was not possible.<BR>The value of timer TD is MS implementation specific, but shall not exceed the maximum possible value of background scanning timer T as specified in subclause 4.4.3.3.1.<BR>Since this timer value is up to UE implementation, we provide this SBP for customization.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6464,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[10].SBP_EUTRAN_DISABLE_TIMER_VALUE,modem_sbp_data_config[10].SBP_EUTRAN_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"TS 24.301:<BR>As an implementation option, the UE may start a timer for enabling E-UTRA when the UE's attach attempt counter or tracking area updating attempt counter reaches 5 and the UE disables E-UTRA capability for cases described in subclauses 5.5.1.2.6, 5.5.1.3.4.3, 5.5.1.3.6, 5.5.3.2.6, 5.5.3.3.4.3 and 5.5.3.3.6.<BR>For other cases, it is up to the UE implementation when to enable the E-UTRA capability.<BR>Since this timer value is up to UE implementation, we provide this SBP for customization.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+6465,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[6].SBP_GERAN_TO_EUTRAN_SUPPORT_IN_GERAN_PTM,modem_sbp_data_config[6].SBP_GERAN_TO_EUTRAN_SUPPORT_IN_GERAN_PTM,OTA and OTA BY OP,no,no,no,yes,"This feature is used to configure GERAN to E-UTRA support in GERAN packet transfer mode in MS Radio Access capability UE report this capability to network in MS Radio Access capability IE and based on UE capability value, Network will take further action.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00<BR>0x03:PS Handover to EUTRAN supported in addition to capabilities indicated by 0x01 and 0x10 (currently not supported)'<BR>0x02:CCN towards E-UTRAN, E-UTRAN Neighbour Cell measurement reporting and Network controlled cell reselectionto E-UTRAN supported in addition to capabilities indicated by '0x01'<BR>0x01:E-UTRAN Neighbour Cell measurements and MS autonomous cell reselection to E-UTRAN supported",,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+6466,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[23].SBP_HVOLTE_MODE,modem_sbp_data_config[23].SBP_HVOLTE_MODE,OTA and OTA BY OP,no,no,no,yes,This SBP define the default hVoLTE mode (SRLTE mode or LTE-Only mode),BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0-1,,,This SBP only available when SBP_STATUS_HVOLTE is enabled,(VzW) hVoLTE,OP Requirement,,,,Pass,,,,
+6467,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[4].SBP_IDC_802_ANT_ISOLATION,modem_sbp_data_config[4].SBP_IDC_802_ANT_ISOLATION,OTA and OTA BY OP,no,no,no,yes,"It is used to set the antenna isolation between LTE and WiFi. This sbp is reserved for future usage. Currently, MD load will not apply this value.",BIT,8,,8,0x0c,NR15.R3.MD700.IVT.MP1MR3.MP,,0x07~0x18,,,N/A,MD Config,Modem - Customer Requirement,,,N/A (not use),Untested,,,,
+6468,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[5].SBP_IDC_DISABLE_CUSTOM,modem_sbp_data_config[5].SBP_IDC_DISABLE_CUSTOM,OTA and OTA BY OP,no,no,no,yes,It is used to set whether IDC should force to apply MTK solution or not.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x0f,,,N/A,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=>modem_sbp_data_config[5]->SBP_IDC_DISABLE_CUSTOM<BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] cause = %Mel1_rat_set_cause_enum, isConsysEnbl = %d, is LteStateChng = %d, idcEn =%d, InfDetectorEn = %d, customSbp =%d, GpsBlankEn =%d, R11FeatureEn =%d, direct path status =%d" <BR>=> (check :customSbp)",Pass,,,,
+6469,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[1].SBP_IDC_EN,modem_sbp_data_config[1].SBP_IDC_EN,OTA and OTA BY OP,no,no,no,yes,"This feature is used to cooperate with CONSYS to eliminate interference between LTE and CONSYS(WiFi, BT, GPS). If IDC is enabled, it will apply TDM, FDM or Power backoff according to LTE serving frequency and CONSYS frequency.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,N/A,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=>modem_sbp_data_config[1] -> SBP_IDC_EN<BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] cause = %Mel1_rat_set_cause_enum, isConsysEnbl = %d, is LteStateChng = %d, idcEn =%d, InfDetectorEn = %d, customSbp =%d, GpsBlankEn =%d, R11FeatureEn =%d, direct path status =%d"<BR><BR>=> (check: idcEn)",Pass,,,,
+6470,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[3].SBP_IDC_GPS_BLANK_EN,modem_sbp_data_config[3].SBP_IDC_GPS_BLANK_EN,OTA and OTA BY OP,no,no,no,yes,"This feature is used to notify GPS that there will have LTE Tx, and GPS should ignore signals received in the notified subframes.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x01,,,N/A,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=> modem_sbp_data_config[3] -> SBP_IDC_GPS_BLANK_EN<BR><BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] cause = %Mel1_rat_set_cause_enum, isConsysEnbl = %d, is LteStateChng = %d, idcEn =%d, InfDetectorEn = %d, customSbp =%d, GpsBlankEn =%d, R11FeatureEn =%d, direct path status =%d"<BR><BR>=> (check: GpsBlankEn )",Pass,,,,
+6471,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[2].SBP_IDC_IM_LTE_TX_PWR,modem_sbp_data_config[2].SBP_IDC_IM_LTE_TX_PWR,OTA and OTA BY OP,no,no,no,yes,The value is applied to LTE Tx max power after CONSYS notifies LTE to reduce Tx max power,BIT,8,,8,17,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01~0x17,,,N/A,MD Config,Modem - Customer Requirement,,,"MCF Tool => <BR>Other LID ->NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID <BR>=>modem_sbp_data_config[2] -> SBP_IDC_IM_TX_PWR<BR><BR>PS Intergreate Trace=> <BR>"[L1][IDC] nr_idc_power+backoff_ntf()" isWfScan =%d, isMdNeedPowerbackoff =%d, wifi_tragger_bmp =%d, bt_trigger_bmp =%d, band= %d, old TX power =%d, new TX power = %d"<BR>=> (check: isMdNeedPowerbackoff & old TX power & new TX power )",Pass,,,,
6473,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[30].SBP_IRAT_IN_VIRTUAL_MODE,modem_sbp_data_config[30].SBP_IRAT_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataIRAT Measure/Reselect in Virtual Modebit 0:0:All offbit 1:1:Partial on: 2G measure/reselect 3/4G and 3G measure/reselect 2/4Gbit 2:2:All on: 2G measure/reselect 3/4G, 3G measure/reselect 2/4G, 4G measure/reselect 2/3G",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:All off<BR>2:All on; 2G measure/reselect 3/4G, 3G measure/reselect 2/4G, 4G measure/reselect 2/3G<BR>1:Partial on; 2G measure/reselect 3/4G and 3G measure/reselect 2/4G",,,SBP_ERRC_IRAT_MEASURE_IN_VIRTUAL_MODE,IRAT in V-idle,Multiple SIM,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Pass,,,,
-6477,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[41].SBP_LPP_SERVER_UNSYNC_WITH_ENB_MFBI_WORKAROUND,modem_sbp_data_config[41].SBP_LPP_SERVER_UNSYNC_WITH_ENB_MFBI_WORKAROUND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataConvert band setting when LPP OTDOA measurement request band setting is unsynchronized with eNB MFBI settingbit 0:0:Not convert LPP server OTDOA measurement request band settingbit 1:1:Convert LPP server OTDOA measurement request band setting and report network originally configured band in measurement resultbit 2:2:Convert LPP server OTDOA measurement request band setting and report converted band in measurement result",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not convert LPP server OTDOA measurement request band setting<BR>2:Convert LPP server OTDOA measurement request band setting and report converted band in measurement result<BR>1:Convert LPP server OTDOA measurement request band setting and report network originally configured band in measurement result,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-6478,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[24].SBP_LTE_CONN_RACH_FAIL,modem_sbp_data_config[24].SBP_LTE_CONN_RACH_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataDecide RACH failure handlingbit 0:0:Not Supportedbit 1:1:LTE_CONN_RACH_FAIL_PROFILE_1bit 2:2:LTE_CONN_RACH_FAIL_PROFILE_2bit 3:3:LTE_CONN_RACH_FAIL_PROFILE_3bit 4:4:LTE_CONN_RACH_FAIL_PROFILE_4",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Not Support<BR>1:LTE_CONN_RACH_FAIL_PROFILE_1, see doc description<BR>4:LTE_CONN_RACH_FAIL_PROFILE_4, see doc description<BR>3:LTE_CONN_RACH_FAIL_PROFILE_3, see doc description<BR>2:LTE_CONN_RACH_FAIL_PROFILE_2, see doc description",,,__SBP_EMM_CONN_FAIL_ABNORMAL_B__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6480,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[42].SBP_MDT_BATTERY_LEVEL,modem_sbp_data_config[42].SBP_MDT_BATTERY_LEVEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataMinimum battery level to open GPS for MDT requestbit 0:0:Do not check battery levelbit 10:10:10% of available batterybit 20:20:20% of available battery",BIT,8,,8,0x0A,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Do not check battery level<BR>20:20% of available battery<BR>10:10% of available battery,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-6481,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[37].SBP_MDT_UI_LOCATION_OFF_GPS_REPORT_MODE,modem_sbp_data_config[37].SBP_MDT_UI_LOCATION_OFF_GPS_REPORT_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataMDT GPS location reporting mode- when UI location setting OFFbit 0:0:Not reportbit 1:1:Report the lastest stored locationbit 2:2:Open GPS chip to get and report location information",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not report<BR>2:Open GPS chip to get and report location information<BR>1:Report the latest stored location,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-6482,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[36].SBP_MDT_UI_LOCATION_OFF_STORE_REPORT_MODE,modem_sbp_data_config[36].SBP_MDT_UI_LOCATION_OFF_STORE_REPORT_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataMDT store location reporting mode- when UI location setting OFFbit 0:0:Not reportbit 1:1:Report the lastest stored location",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not report<BR>1:Report the lastest stored location,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-6483,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[20].SBP_MDVSIM_KI_IDX,modem_sbp_data_config[20].SBP_MDVSIM_KI_IDX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataMDVSIM Ki start index valuebit 0:0:Default Ki start index:0",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~16:Ki,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6484,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[21].SBP_MDVSIM_OPC_IDX,modem_sbp_data_config[21].SBP_MDVSIM_OPC_IDX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataMDVSIM OPc start index valuebit 16:16:Default OPc start index:16",BIT,8,,8,0x10,NR15.R3.MD700.IVT.MP1MR3.MP,,0~16:OPc,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
-6486,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[22].SBP_SDM_RETRY_TIMER,modem_sbp_data_config[22].SBP_SDM_RETRY_TIMER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataObsolete. Please refer to NVRAM_EF_SDM_ADS_PROFILE_LID for same funtionality",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6487,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[12].SBP_SMS_MAX_TL_RETRY,modem_sbp_data_config[12].SBP_SMS_MAX_TL_RETRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSMS max TL retry",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,,,,,,,Pass,,,,
-6488,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[38].SBP_SMS_MAX_TL_RETRY_COUNT_DURING_CALL,modem_sbp_data_config[38].SBP_SMS_MAX_TL_RETRY_COUNT_DURING_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSMS max TL retry count when call ongoing on peer Protocol Stack",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,,,,,,,Pass,,,,
-6489,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[13].SBP_SMS_TL_RETRY_TIMER,modem_sbp_data_config[13].SBP_SMS_TL_RETRY_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSMS TL retry timer (in second)",BIT,8,,8,0x0C,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30,,,,,,,,,Pass,,,,
-6490,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[39].SBP_SMS_TL_RETRY_TIMER_DURING_CALL,modem_sbp_data_config[39].SBP_SMS_TL_RETRY_TIMER_DURING_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataSMS TL retry timer (in second) when call ongoing on peer Protocol Stackbit 30:30:Timeout Value 300 seconds",BIT,8,,8,0x1e,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30,,,,,,,,,Pass,,,,
-6491,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[11].SBP_SS_DISABLE_AFR_TIMER_PERIOD,modem_sbp_data_config[11].SBP_SS_DISABLE_AFR_TIMER_PERIOD,OTA and OTA BY OP,no,no,no,yes,"Purpose:<BR>If CSFB is triggered by CS-SS(Supplementary Service), disable AFR for a period defined by SBP. <BR>If SS operation fails, it keeps DUT in CS (2G/3G) for next SS operation, so retry can have better chance to pass<BR>Use Timing: SS operation over CSFB<BR>Default Settings: 4 sec",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0x00~0x0F<BR>:0x00: Disabled<BR>~0x00: timer in seconds,,,SBP_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G,MD Config,Modem - Customer Requirement,,,"[Init]<BR>Device is registered in LTE<BR>The operator supports Supplementary service over CS and not IMS, so that the device has to perform CSFB to complete SS operation<BR><BR>[Test Steps]<BR>trigger Supplementary service over CSFB for example call waiting.<BR><BR>[Expected results]<BR><BR>SBP enabled:<BR>If SS operation successful, UE can go back to 4G immediately<BR>If SS operation fails, UE should stay in 3G for 4sec, not immediate back to LTE<BR><BR>SBP disabled<BR>UE can go back to 4G immediately<BR><BR>Note:<BR>There is a dependency upon SBP_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G",Pass,,,,
-6492,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[25].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP1,modem_sbp_data_config[25].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP1,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataObsolete after UMOLY.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0xff,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
-6493,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[26].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP2,modem_sbp_data_config[26].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP2,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataObsolete after UMOLY.",BIT,8,,8,0xfe,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6477,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[41].SBP_LPP_SERVER_UNSYNC_WITH_ENB_MFBI_WORKAROUND,modem_sbp_data_config[41].SBP_LPP_SERVER_UNSYNC_WITH_ENB_MFBI_WORKAROUND,OTA and OTA BY OP,no,no,no,yes,"This SBP is to workaround network LPP server issue. When eNB support MFBI(Multi Frequency Band Indicator), UE identify the band through eNB MFBI setting. When network LPP server is unsynchronized with eNB, it will send OTDOA measurement request with wrong band setting that conflict with eNB setting. To workaround this network issue, UE converts LPP server configured band based on eNB setting and performs OTDOA measurement.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not convert LPP server OTDOA measurement request band setting<BR>2:Convert LPP server OTDOA measurement request band setting and report converted band in measurement result<BR>1:Convert LPP server OTDOA measurement request band setting and report network originally configured band in measurement result,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+6478,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[24].SBP_LTE_CONN_RACH_FAIL,modem_sbp_data_config[24].SBP_LTE_CONN_RACH_FAIL,OTA and OTA BY OP,no,no,no,yes,"If UE establishs connection but the connection cannot be established due to RACH failure, the behavior will be different depend on different setting<BR><BR>- Value = 0x00 <BR>If UE establishs connection for ATTACH/TAU/SR but the connection cannot be established due to RACH failure, UE will retry to establish connection immediately.<BR><BR>- value = 0x01, LTE_CONN_RACH_FAIL_PROFILE_1. <BR>If UE establishs connection for ATTACH/TAU/SR but the connection cannot be established due to RACH failure, the UE's behavior will follow TS 24.301 5.5.1.2.6(b) /5.5.3.2.6(b) /5.6.1.6(b) according to its procedure. It is the same behavior as SBP_EMM_CONN_FAIL_ABNORMAL_B.<BR><BR>- value = 0x02, LTE_CONN_RACH_FAIL_PROFILE_2<BR>This is for Korea KT operator. <BR>If UE establishs connection for ATTACH but the connection cannot be established due to RACH failure, the UE's behavior will follow TS 24.301 5.5.1.2.6 (b) to increase attach attempt counter. If 5 consecutive times RACH failure for ATTACH, UE will disable EUTRAN and the length of disable EUTRAN timer is the same as that of T3402. <BR>If UE establishs connection for TAU but the connection cannot be established due to RACH failure, the UE's behavior will follow TS 24.301 5.5.3.2.6 (b) to increase tau attempt counter. If 5 consecutive times RACH failure for TAU, UE will disable EUTRAN and the length of disable EUTRAN timer is the same as that of T3402.<BR>If UE establishs connection for SR but the connection cannot be established due to RACH failure, the UE's behavior will follow TS 24.301 5.6.1.6 (b). If 5 consecutive times RACH failure for SR, UE will disable EUTRAN and the length of disable EUTRAN timer is 3 minute.<BR><BR>- value = 0x03, LTE_CONN_RACH_FAIL_PROFILE_3<BR>This is for Korea SKT operator.<BR>If UE establishs connection for ATTACH but the connection cannot be established due to RACH failure, the UE's behavior will follow TS 24.301 5.5.1.2.6 (b) to increase attach attempt counter. If 5 consecutive times RACH failure for ATTACH, UE will disable EUTRAN and the length of disable EUTRAN timer is 1/3 length of T3402.<BR>If UE establishs connection for TAU but the connection cannot be established due to RACH failure, the UE's behavior will follow TS 24.301 5.5.3.2.6 (b) to increase tau attempt counter. If 5 consecutive times RACH failure for TAU, UE will disable EUTRAN and the length of disable EUTRAN timer is 1/3 length of T3402.<BR><BR>- value = 0x04, LTE_CONN_RACH_FAIL_PROFILE_4<BR>This is for Korea LGU+ operator.<BR>If UE which is LTE single mode establishs connection for TAU but the connection cannot be established due to RACH failure, the UE's behavior will follow TS 24.301 5.5.3.2.6 (b) to increase tau attempt counter. If 5 consecutive times RACH failure for TAU, UE will start T3402 but its length is 2 minute.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Not Support<BR>1:LTE_CONN_RACH_FAIL_PROFILE_1, see doc description<BR>4:LTE_CONN_RACH_FAIL_PROFILE_4, see doc description<BR>3:LTE_CONN_RACH_FAIL_PROFILE_3, see doc description<BR>2:LTE_CONN_RACH_FAIL_PROFILE_2, see doc description",,,User could use compile option __SBP_EMM_CONN_FAIL_ABNORMAL_B__ to turn on PROFILE_1.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6480,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[42].SBP_MDT_BATTERY_LEVEL,modem_sbp_data_config[42].SBP_MDT_BATTERY_LEVEL,OTA and OTA BY OP,no,no,no,yes,"This SBP is to control the minimum battery level for MDT (Minimization of Drive Tests) open GPS.<BR>Open GPS will consumes UE power, but when the available battery power is below a certain threshold, user may want to prevent MDT from opening GPS to extend the usage time.",BIT,8,,8,0x0A,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Do not check battery level<BR>20:20% of available battery<BR>10:10% of available battery,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+6481,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[37].SBP_MDT_UI_LOCATION_OFF_GPS_REPORT_MODE,modem_sbp_data_config[37].SBP_MDT_UI_LOCATION_OFF_GPS_REPORT_MODE,OTA and OTA BY OP,no,no,no,yes,"If UE always activates GPS positioning when network send MDT request to UE, it might increase the power consumption. This SBP provides flexable configuration for MDT feature. According ERRC air message, UE might be requested to report current store location information or activate GPS positioning. This SBP is for GPS positioning request.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not report<BR>2:Open GPS chip to get and report location information<BR>1:Report the latest stored location,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+6482,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[36].SBP_MDT_UI_LOCATION_OFF_STORE_REPORT_MODE,modem_sbp_data_config[36].SBP_MDT_UI_LOCATION_OFF_STORE_REPORT_MODE,OTA and OTA BY OP,no,no,no,yes,"If UE always activates GPS positioning when network send MDT request to UE, it might increase the power consumption. This SBP provides flexable configuration for MDT feature. According ERRC air message, UE might be requested to report current store location information or activate GPS positioning. This SBP is for store loaction information request.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not report<BR>1:Report the lastest stored location,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+6483,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[20].SBP_MDVSIM_KI_IDX,modem_sbp_data_config[20].SBP_MDVSIM_KI_IDX,OTA and OTA BY OP,no,no,no,yes,"Provide the index of Secret Key (Ki) needed for (U)SIM authentication in modem virtual SIM environment.<BR>- Configured together with Operator Variant Algorithm Configuration Field (OPc) by user through proprietary AT command AT+EVSIMKEY=<op>, <profileid>[, <keylen>, <Ki_OPc>]",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~16:Ki,,,N/A,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6484,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[21].SBP_MDVSIM_OPC_IDX,modem_sbp_data_config[21].SBP_MDVSIM_OPC_IDX,OTA and OTA BY OP,no,no,no,yes,"Provide the index of Operator Variant Algorithm Configuration Field (OPc) needed for (U)SIM authentication in modem virtual SIM environment.<BR>- Configured together with Secret Key (Ki) by user through proprietary AT command AT+EVSIMKEY=<op>, <profileid>[, <keylen>,"<Ki_OPc>"]",BIT,8,,8,0x10,NR15.R3.MD700.IVT.MP1MR3.MP,,0~16:OPc,,,N/A,,,,,covered by SBP framework UT/IT result,Pass,,,,
+6486,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[22].SBP_SDM_RETRY_TIMER,modem_sbp_data_config[22].SBP_SDM_RETRY_TIMER,Not Support,no,no,no,yes,,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6487,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[12].SBP_SMS_MAX_TL_RETRY,modem_sbp_data_config[12].SBP_SMS_MAX_TL_RETRY,OTA and OTA BY OP,no,no,no,yes,This provides the value for the maximum count of the retries allowed at TL layer for the SMS pdu. If any SMS is failed due to some temporary cause as per MTK design we retry the SMS. This SBP value specifies the number of times the retry needs to be done. Customer can modify it according to them but we recommend to use the default value only. Anyway customer can use any value above 3 sec but we suggest to use from the ones provided below. While modifying this customer should note that increasing retry count will increase the response time for sending the SMS in case of multiple failures.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,N/A,,,,,,Pass,,,,
+6488,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[38].SBP_SMS_MAX_TL_RETRY_COUNT_DURING_CALL,modem_sbp_data_config[38].SBP_SMS_MAX_TL_RETRY_COUNT_DURING_CALL,OTA and OTA BY OP,no,no,no,yes,"This provides the value for the maximum count of the retries allowed at TL layer for the SMS pdu when a call is ongoing on the other protocol stack. When the SMS is ongoing on one protocol stack, and request for the call comes on the other protocol stack, the SMS will be affected by the call. So in that case we provide this SBP to customize the number of retries when the SMS is interrupted by the call on the other protocol stack.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,This SBP is dependent on other compilation switch __ALLOW_CALL_DURING_SMS_IN_OTHER_STACK__,,,,,,Pass,,,,
+6489,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[13].SBP_SMS_TL_RETRY_TIMER,modem_sbp_data_config[13].SBP_SMS_TL_RETRY_TIMER,OTA and OTA BY OP,no,no,no,yes,This provides the value of the TL Retry timer (in seconds). If any SMS is failed due to some temporary cause as per MTK design we retry the SMS. This SBP value specifies the time(in sec) after which the retry needs to be done. Customer can modify it according to them but we recommend to use the default value only. Anyway customer can use any value above 3 sec but we suggest to use from the ones provided below.,BIT,8,,8,0x0C,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30,,,N/A,,,,,,Pass,,,,
+6490,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[39].SBP_SMS_TL_RETRY_TIMER_DURING_CALL,modem_sbp_data_config[39].SBP_SMS_TL_RETRY_TIMER_DURING_CALL,OTA and OTA BY OP,no,no,no,yes,"This provides the value for the SMS TL retry timer when a call is ongoing on the other protocol stack. When the SMS is ongoing on one protocol stack, and request for the call comes on the other protocol stack, the SMS will be affected by the call. So in that case we provide this SBP to customize the SMS TL retry timer when the SMS is interrupted by the call on the other protocol stack.",BIT,8,,8,0x1e,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30,,,This SBP is dependent on other compilation switch __ALLOW_CALL_DURING_SMS_IN_OTHER_STACK__,,,,,,Pass,,,,
+6491,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[11].SBP_SS_DISABLE_AFR_TIMER_PERIOD,modem_sbp_data_config[11].SBP_SS_DISABLE_AFR_TIMER_PERIOD,OTA and OTA BY OP,no,no,no,yes,"If CSFB is triggered by CS-SS(Supplementary Service), disable AFR for a period defined by SBP_SS_DISABLE_AFR_TIMER_PERIOD.",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0x00~0x0F<BR>:0x00: Disabled<BR>~0x00: timer in seconds,,,N/A,MD Config,Modem - Customer Requirement,,,"[Init]<BR>Device is registered in LTE<BR>The operator supports Supplementary service over CS and not IMS, so that the device has to perform CSFB to complete SS operation<BR><BR>[Test Steps]<BR>trigger Supplementary service over CSFB for example call waiting.<BR><BR>[Expected results]<BR><BR>SBP enabled:<BR>If SS operation successful, UE can go back to 4G immediately<BR>If SS operation fails, UE should stay in 3G for 4sec, not immediate back to LTE<BR><BR>SBP disabled<BR>UE can go back to 4G immediately<BR><BR>Note:<BR>There is a dependency upon SBP_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G",Pass,,,,
+6492,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[25].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP1,modem_sbp_data_config[25].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP1,Not Support,no,no,no,yes,,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0xff,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
+6493,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[26].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP2,modem_sbp_data_config[26].SBP_VDM_ADS_SEL_ALGO_MASK_WFCP_VDP_PRIORITY_GROUP2,Not Support,no,no,no,yes,,BIT,8,,8,0xfe,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"This SBP is no use, no need to do test.",Untested,,,,
6494,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[8].WORLD_MODE_C,modem_sbp_data_config[8].WORLD_MODE_C,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataWorld Mode: CDMAbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
6495,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[8].WORLD_MODE_G,modem_sbp_data_config[8].WORLD_MODE_G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataWorld Mode: GSMbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
6496,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[8].WORLD_MODE_LF,modem_sbp_data_config[8].WORLD_MODE_LF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP DataWorld Mode: LTE-FDDbit 0:0:Not Supportedbit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,covered by SBP framework UT/IT result,Pass,,,,
@@ -6487,7 +6487,7 @@
6522,1347,NVRAM_EF_SDM_ADS_PROFILE_LID,"1,2",sms_over_ip_allowed,sms_over_ip_allowed,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]sms over ip preference",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:SMS over IP is not allowed<BR>1:SMS over IP is allowed,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. IMS register for SMS<BR>3. Send SMS<BR>[Expected Result] UE can send SMS normally. Provide the pass log to RD to check,Pass,,,,
6523,1347,NVRAM_EF_SDM_ADS_PROFILE_LID,"1,2",sms_over_wifi_preference,sms_over_wifi_preference,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]sms over wifi preference",UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,3:wifi only<BR>1:wifi preferred<BR>2:cellular preferred<BR>0:cellular only,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. IMS register for SMS<BR>3. Send SMS<BR>[Expected Result] UE can send SMS normally. Provide the pass log to RD to check,Pass,,,,
6524,1347,NVRAM_EF_SDM_ADS_PROFILE_LID,"1,2",try_cs_when_2g_voice_call,try_cs_when_2g_voice_call,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]try CS when 2G voice call",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:try CS when 2G voice call ongoing<BR>0:not try CS when 2G voice call ongoing,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. register 2G normal service<BR>3. dial call<BR>4. Send SMS during call ongoing<BR>[Expected Result] UE can send SMS normally. Provide the pass log to RD to check,Pass,,,,
-6525,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile,nvram_sim_profile,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profile,UNSIGNED CHAR,36,36,,"0xff, 0xff, 0xff, 0xff, 0x7f, 0x9f, 0x00, 0xdf, 0xff, 0x00, 0x00, 0x1f, 0xe2, 0x08, 0x11, 0x06, 0xc7, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x51, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6525,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile,nvram_sim_profile,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profile,UNSIGNED CHAR,36,36,,"0xff, 0xff, 0xff, 0xff, 0x7f, 0x9f, 0x00, 0xdf, 0xff, 0x00, 0x00, 0x1f, 0xe2, 0x08, 0x11, 0x06, 0xc7, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x51, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,byte array according to 3GPP spec,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6526,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[5].bit1,nvram_sim_profile[5].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : Language Selection bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6527,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[27].bit1,nvram_sim_profile[27].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileAlignment left supported by Terminal bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6528,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[25].bit1,nvram_sim_profile[25].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : CSG Cell Selectionbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6495,7 +6495,7 @@
6530,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[24].bit1,nvram_sim_profile[24].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent Browsing Statusbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6531,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[22].bit1,nvram_sim_profile[22].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :SET FRAMESbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6532,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[21].bit1,nvram_sim_profile[21].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSupport of UTRAN PS with extended parametersbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6533,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit1,nvram_sim_profile[4].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :SET UP EVENT LIST bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6533,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit1,nvram_sim_profile[4].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :SET UP EVENT LIST bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6534,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[20].bit1,nvram_sim_profile[20].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileWMLbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6535,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[17].bit1,nvram_sim_profile[17].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :DISPLAY TEXT(variable time out)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6536,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[0].bit1,nvram_sim_profile[0].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProfile Downloadbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6506,7 +6506,7 @@
6541,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[11].bit1,nvram_sim_profile[11].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :OPEN CHANNELbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6542,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[9].bit1,nvram_sim_profile[9].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSoft Keys support for SELECT ITEMbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6543,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[7].bit1,nvram_sim_profile[7].bit1,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileProactive UICC :TIMER MANAGEMENT(start,stop)bit 0:0:Not supported bit 1:1:supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6544,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit1,nvram_sim_profile[8].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileDISPLAY TEXTbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6544,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit1,nvram_sim_profile[8].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileDISPLAY TEXTbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6545,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit1,nvram_sim_profile[34].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC: GET INPUT (Variable Time out)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6546,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[28].bit1,nvram_sim_profile[28].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileStyle normal supported by Terminalbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6547,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[33].bit1,nvram_sim_profile[33].bit1,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileURI support for SEND SHORT MESSAGEbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6525,7 +6525,7 @@
6560,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[19].bit1to8,nvram_sim_profile[19].bit1to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileReserved by CCAT,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6561,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[12].bit2,nvram_sim_profile[12].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileGPRSbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6562,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[0].bit2,nvram_sim_profile[0].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSMS-PP Data downloadbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6563,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit2,nvram_sim_profile[8].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSEND DTMF command bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6563,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit2,nvram_sim_profile[8].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSEND DTMF command bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6564,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit2,nvram_sim_profile[34].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileData Connection Status Change Event support ? PDP Connectionbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6565,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[27].bit2,nvram_sim_profile[27].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileAlignment centre supported by Terminalbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6566,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[9].bit2,nvram_sim_profile[9].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSoft keys support for SETUP MENUbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6544,7 +6544,7 @@
6579,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[20].bit2,nvram_sim_profile[20].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileXHTMLbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6580,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[17].bit2,nvram_sim_profile[17].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :GET INKEY(help suppport while wait )bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6581,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[30].bit2,nvram_sim_profile[30].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSupport of CSG cell discovery bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6582,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit2,nvram_sim_profile[4].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : MT callbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6582,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit2,nvram_sim_profile[4].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : MT callbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6583,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[2].bit2,nvram_sim_profile[2].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :GET INKEY bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6584,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[6].bit2,nvram_sim_profile[6].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :power off cardbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6585,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[7].bit2,nvram_sim_profile[7].bit2,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :TIMER MANAGEMENT(get current value) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6565,10 +6565,10 @@
6600,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[21].bit3,nvram_sim_profile[21].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PLAY TONE(melody tones and themes tones)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6601,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[16].bit3,nvram_sim_profile[16].bit3,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileTCP,UICC in server modebit 0:0:Not supported bit 1:1:supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6602,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[20].bit3,nvram_sim_profile[20].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileHTMLbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6603,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit3,nvram_sim_profile[4].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : CALL connected bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6603,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit3,nvram_sim_profile[4].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : CALL connected bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6604,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[30].bit3,nvram_sim_profile[30].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileConfirmation parameters supported for OPEN CHANNEL in Terminal Server Modebit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6605,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[33].bit3,nvram_sim_profile[33].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileMedia Type Voice supported for SET UP CALL and Call Control by USIMbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6606,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit3,nvram_sim_profile[8].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(NMR)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6606,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit3,nvram_sim_profile[8].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(NMR)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6607,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[7].bit3,nvram_sim_profile[7].bit3,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(date ,timeand time zone)bit 0:0:Not supported bit 1:1:supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6608,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[32].bit3,nvram_sim_profile[32].bit3,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent: Poll Interval Negotiation bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6609,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[31].bit3,nvram_sim_profile[31].bit3,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileprovide location info, H(e)NB surronding macrocellsbit 0:0:Not supported bit 1:1:supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6580,7 +6580,7 @@
6615,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[9].bit3to8,nvram_sim_profile[9].bit3to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,6,,6,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6616,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[25].bit3to8,nvram_sim_profile[25].bit3to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,6,,6,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6617,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[0].bit4,nvram_sim_profile[0].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileMenu selectionbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6618,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit4,nvram_sim_profile[4].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : CALL disconnected bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6618,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit4,nvram_sim_profile[4].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : CALL disconnected bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6619,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[20].bit4,nvram_sim_profile[20].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileCHTML bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6620,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[33].bit4,nvram_sim_profile[33].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileMedia Type Video supported for SET UP CALL and Call Control by USIM bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6621,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[17].bit4,nvram_sim_profile[17].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :GET INKEY(variable timeout) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6600,12 +6600,12 @@
6635,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[16].bit4,nvram_sim_profile[16].bit4,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileTCP,UICC in client mode , Local connection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6636,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[15].bit4,nvram_sim_profile[15].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileText attributes clause 5.3.7bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6637,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[5].bit4,nvram_sim_profile[5].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : Channel Status bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6638,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit4,nvram_sim_profile[8].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(Language) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6638,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit4,nvram_sim_profile[8].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(Language) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6639,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[12].bit4,nvram_sim_profile[12].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileIrDAbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6640,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[6].bit4,nvram_sim_profile[6].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :Get Reader Status(get reader status)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6641,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[11].bit4,nvram_sim_profile[11].bit4,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :SEND DATA bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6642,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[18].bit4to8,nvram_sim_profile[18].bit4to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6643,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit4to8,nvram_sim_profile[34].bit4to8,Not Support,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,5,,5,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6643,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit4to8,nvram_sim_profile[34].bit4to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,5,,5,,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6644,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[1].bit5,nvram_sim_profile[1].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileCall contorl by NAAbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6645,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[30].bit5,nvram_sim_profile[30].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSupport of CAT over the modem interface bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6646,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[22].bit5,nvram_sim_profile[22].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileGeographical Location reporting bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6613,7 +6613,7 @@
6648,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[5].bit5,nvram_sim_profile[5].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent :Access technology Changebit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6649,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[29].bit5,nvram_sim_profile[29].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC: ACTIVATE i.e class l is supported bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6650,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[32].bit5,nvram_sim_profile[32].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC: PROVIDE LOCAL INFORMATION (Supported Radio Access Technologies) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6651,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit5,nvram_sim_profile[8].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(Timing Advance) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6651,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit5,nvram_sim_profile[8].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(Timing Advance) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6652,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[24].bit5,nvram_sim_profile[24].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent Network Rejection bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6653,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[2].bit5,nvram_sim_profile[2].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PLAY TONE bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6654,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[12].bit5,nvram_sim_profile[12].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRS232bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6627,7 +6627,7 @@
6662,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[16].bit5,nvram_sim_profile[16].bit5,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileUDP,UICC in client mode , Local connectionbit 0:0:Not supported bit 1:1:supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6663,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[0].bit5,nvram_sim_profile[0].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSMS-PP Data downloadbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6664,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[21].bit5,nvram_sim_profile[21].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileToolkit initiated GBA bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6665,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit5,nvram_sim_profile[4].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : Location statusbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6665,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit5,nvram_sim_profile[4].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : Location statusbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6666,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[17].bit5,nvram_sim_profile[17].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :Provide Local Informatin(ESN) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6667,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[15].bit5,nvram_sim_profile[15].bit5,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6668,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[23].bit5to8,nvram_sim_profile[23].bit5to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6639,7 +6639,7 @@
6674,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[30].bit6,nvram_sim_profile[30].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSupport for Incoming IMS Data event bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6675,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[28].bit6,nvram_sim_profile[28].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileStyle text foreground colour supported by Terminal *bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6676,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[16].bit6,nvram_sim_profile[16].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileDirect communication channelbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6677,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit6,nvram_sim_profile[4].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : user Activitybit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Follow SAT spec,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
+6677,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit6,nvram_sim_profile[4].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : user Activitybit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Follow SAT spec,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Pass,,,,
6678,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[27].bit6,nvram_sim_profile[27].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileFont size small supported by Terminal bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6679,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[1].bit6,nvram_sim_profile[1].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileUCS2 Entry supportedbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6680,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[33].bit6,nvram_sim_profile[33].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileREFRESH with eUICC Profile State Change modebit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6650,14 +6650,14 @@
6685,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[0].bit6,nvram_sim_profile[0].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileTimer Expirationbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6686,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[21].bit6,nvram_sim_profile[21].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :RETRIEVE MULTIMEDIA MESSAGEbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6687,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[24].bit6,nvram_sim_profile[24].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent: HCI connectivity event (if class m is supported)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6688,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit6,nvram_sim_profile[8].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :LANGUAGE NOTIFICATIONbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6688,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit6,nvram_sim_profile[8].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :LANGUAGE NOTIFICATIONbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6689,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[31].bit6,nvram_sim_profile[31].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileCall Control on GPRSbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6690,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[13].bit6,nvram_sim_profile[13].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileNo display capabilitybit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6691,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[2].bit6,nvram_sim_profile[2].bit6,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :POLL INTERVAL bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6692,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[6].bit6to8,nvram_sim_profile[6].bit6to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileRFU,BIT,3,,3,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6693,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[15].bit6to8,nvram_sim_profile[15].bit6to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileWidth reducton when in menubit 0:0:Not supported bit 1:1:supported,BIT,3,,3,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6694,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[12].bit6to8,nvram_sim_profile[12].bit6to8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileNO of channels supported by terminal,BIT,3,,3,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6695,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit7,nvram_sim_profile[8].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :LAUNCH BROWSER bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Follow SAT Spec,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
+6695,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit7,nvram_sim_profile[8].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :LAUNCH BROWSER bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Follow SAT Spec,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Pass,,,,
6696,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[31].bit7,nvram_sim_profile[31].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive local information(imeisv) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6697,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[7].bit7,nvram_sim_profile[7].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSET UP CALL bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6698,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[30].bit7,nvram_sim_profile[30].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileSupport for IMS Registration event bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6666,7 +6666,7 @@
6701,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[0].bit7,nvram_sim_profile[0].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileUSSD Sting data object support in Call control by USIMbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6702,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[5].bit7,nvram_sim_profile[5].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent :Local Connection bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6703,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[13].bit7,nvram_sim_profile[13].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileNo Keypad avialablebit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6704,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit7,nvram_sim_profile[4].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent :Idle Screen Available bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Follow SAT Spec,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
+6704,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit7,nvram_sim_profile[4].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent :Idle Screen Available bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Follow SAT Spec,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Pass,,,,
6705,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[17].bit7,nvram_sim_profile[17].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive local information(imeisv) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6706,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[16].bit7,nvram_sim_profile[16].bit7,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileE-UTRANbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6707,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[3].bit7,nvram_sim_profile[3].bit7,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(MCC,MNC,LAC,CELLID&IMEI) bit 0:0:Not supported bit 1:1:supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6685,7 +6685,7 @@
6720,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[33].bit8,nvram_sim_profile[33].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC: eUICC OPERATIONbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6721,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[3].bit8,nvram_sim_profile[3].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(NMR) bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6722,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[1].bit8,nvram_sim_profile[1].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileDisplay Textbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
-6723,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit8,nvram_sim_profile[4].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : CArd Reader Status bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6723,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[4].bit8,nvram_sim_profile[4].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileEvent : CArd Reader Status bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6724,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[7].bit8,nvram_sim_profile[7].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileCall Control of NAAbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6725,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[28].bit8,nvram_sim_profile[28].bit8,OTA and OTA BY OP,no,no,no,no,"SIM/USIM Terminal profileRFU,",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
6726,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[21].bit8,nvram_sim_profile[21].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :DISPLAY MULTIMEDIA MESSAGEbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,,,,,RD IT done. No need for tester effort,Pass,,,,
@@ -6700,7 +6700,7 @@
6735,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[31].bit8,nvram_sim_profile[31].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :Proactive local information(search mode change)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Pass,,,,
6736,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[2].bit8,nvram_sim_profile[2].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :REFRESH bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Pass,,,,
6737,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[11].bit8,nvram_sim_profile[11].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :DECLARE SERVICEbit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Pass,,,,
-6738,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit8,nvram_sim_profile[8].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(Access technology)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,RD IT done. No need for tester effort,Untested,,,,
+6738,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[8].bit8,nvram_sim_profile[8].bit8,OTA and OTA BY OP,no,no,no,no,SIM/USIM Terminal profileProactive UICC :PROVIDE LOCAL INFO(Access technology)bit 0:0:Not supported bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
6739,61195,NVRAM_EF_SMSAL_COMMON_PARAM_LID,"1,2",all_lang_on,all_lang_on,Not Support,no,no,no,yes,[RUNTIME]CB all language ON,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,Test in machine : N<BR><BR>Test Time (minutes)<BR>5<BR><BR>[Init]<BR>power on<BR>[Test Step]<BR>power on and coneect MCF tool<BR>[Expected Result]<BR>the value hould be in right default value,Untested,,,,
6740,61195,NVRAM_EF_SMSAL_COMMON_PARAM_LID,"1,2",all_lang_on.all_lang_is_on,all_lang_on.all_lang_is_on,Not Support,no,no,no,yes,[RUNTIME]CB all language ONCB all language ONbit 0:0:CB All Language OFFbit 1:1:CB All Language ON,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,Test in machine : N<BR><BR>Test Time (minutes)<BR>5<BR><BR>[Init]<BR>power on<BR>[Test Step]<BR>power on and coneect MCF tool<BR>[Expected Result]<BR>the value hould be in right default value,Untested,,,,
6741,61195,NVRAM_EF_SMSAL_COMMON_PARAM_LID,"1,2",bearer_service,bearer_service,Not Support,no,yes,no,yes,"[INTERNAL,RUNTIME]Preferred Service",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,,,,,,Test in machine : N<BR><BR>Test Time (minutes)<BR>5<BR><BR>[Init]<BR>power on<BR>[Test Step]<BR>power on and coneect MCF tool<BR>[Expected Result]<BR>the value hould be in right default value,Untested,,,,
@@ -7205,7 +7205,7 @@
7244,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",lwip_r13.lwip_r13,lwip_param_r13.lwip_r13.lwip_r13,Not Support,no,no,no,no,This field defines whether the UE supports LWIP operation. A UE which supports LWIP operation shall also support WLAN measurements.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported,BIT,8,,8,bit: 0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0:Not supported<BR>1:Supported,,,,,,,,,Untested,,,,
7245,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",logical_channel_sr_prohibit_timer_r12,mac_param_r12.logical_channel_sr_prohibit_timer_r12,Not Support,no,no,no,no,This field defines whether the UE supports the logicalChannelSR-ProhibitTimer as specified in TS 36.321. It is mandatory for UEs of any ue-Category-NB to support this feature.,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
7246,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",logical_channel_sr_prohibit_timer_r12.logical_channel_sr_prohibit_timer_r12,mac_param_r12.logical_channel_sr_prohibit_timer_r12.logical_channel_sr_prohibit_timer_r12,OTA BY OP,no,no,no,no,This field defines whether the UE supports the logicalChannelSR-ProhibitTimer as specified in TS 36.321. It is mandatory for UEs of any ue-Category-NB to support this feature.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported,BIT,8,,8,bit: 1,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:Use 0 or 1 to indicate<BR>bit 0:0:Not supported<BR>bit 1:1:Supported,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step] Power on, 4G registration is completed.<BR><BR>[Expected Result] Check this field in UE-EUTRA-Capability is matched as your MCF setting",Untested,,,,
-7247,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",long_drx_command_r12,mac_param_r12.long_drx_command_r12,OTA BY OP,no,no,no,no,This field defines whether the UE supports Long DRX Command MAC Control Element as specified in TS 36.321. It is mandatory for UEs of this release of the specification.,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+7247,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",long_drx_command_r12,mac_param_r12.long_drx_command_r12,OTA BY OP,no,no,no,no,This field defines whether the UE supports Long DRX Command MAC Control Element as specified in TS 36.321. It is mandatory for UEs of this release of the specification.,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
7248,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",long_drx_command_r12.long_drx_command_r12,mac_param_r12.long_drx_command_r12.long_drx_command_r12,OTA BY OP,no,no,no,no,This field defines whether the UE supports Long DRX Command MAC Control Element as specified in TS 36.321. It is mandatory for UEs of this release of the specification.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported,BIT,8,,8,bit: 1,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
7249,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",data_inact_mon_r14,mac_param_v1430.data_inact_mon_r14,Not Support,no,no,no,no,This field defines whether the UE supports data inactivity monitoring as specified in TS 36.321.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
7250,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",data_inact_mon_r14.data_inact_mon_r14,mac_param_v1430.data_inact_mon_r14.data_inact_mon_r14,OTA and OTA BY OP,no,no,no,no,This field defines whether the UE supports data inactivity monitoring as specified in TS 36.321.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported,BIT,8,,8,bit: 0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step] Power on, 4G registration is completed.<BR><BR>[Expected Result] Check this field in UE-EUTRA-Capability is matched as your MCF setting.",Untested,,,,
@@ -7277,7 +7277,7 @@
7316,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",recommend_bit_rate_query_r14,mmtel_param_r14.recommend_bit_rate_query_r14,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports the bit rate recommendation query message from the UE to the eNB as specified in TS 36.321, clause 6.1.3.13. This field is only applicable if the UE supports recommendedBitRate-r14.",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
7317,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",recommend_bit_rate_query_r14.recommend_bit_rate_query_r14,mmtel_param_r14.recommend_bit_rate_query_r14.recommend_bit_rate_query_r14,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports the bit rate recommendation query message from the UE to the eNB as specified in TS 36.321, clause 6.1.3.13. This field is only applicable if the UE supports recommendedBitRate-r14.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
7318,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",recommend_bit_rate_r14,mmtel_param_r14.recommend_bit_rate_r14,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports the bit rate recommendation message from the eNB to the UE as specified in TS 36.321, clause 6.1.3.13.",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-7319,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",recommend_bit_rate_r14.recommend_bit_rate_r14,mmtel_param_r14.recommend_bit_rate_r14.recommend_bit_rate_r14,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports the bit rate recommendation message from the eNB to the UE as specified in TS 36.321, clause 6.1.3.13.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,,MD Config,Modem - Customer Requirement,,,IODT with VzW is still ongoing. waiting for VzW to modify their spec and then RnS has to change their scripts based on modified VzW spec. After that IODT will resume.,Untested,,,,
+7319,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",recommend_bit_rate_r14.recommend_bit_rate_r14,mmtel_param_r14.recommend_bit_rate_r14.recommend_bit_rate_r14,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports the bit rate recommendation message from the eNB to the UE as specified in TS 36.321, clause 6.1.3.13.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0,,,,MD Config,Modem - Customer Requirement,,,IODT with VzW is still ongoing. waiting for VzW to modify their spec and then RnS has to change their scripts based on modified VzW spec. After that IODT will resume.,Pass,,,,
7320,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",interFreqSI_AcquisitionForHO_r9_fdd,nei_cell_si_acq_r9.interFreqSI_AcquisitionForHO_r9_fdd,OTA and OTA BY OP,no,no,no,no,"This parameter defines whether the UE supports in LTE FDD mode, upon configuration of si-RequestForHO by the network, acquisition of relevant information from a neighbouring inter-frequency cell by reading the SI of the neighbouring cell using autonomous gaps and reporting the acquired information to the network as specified in TS 36.331.",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,configure this param in MCF tool and push to UE.,Pass,,,,
7321,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",interFreqSI_AcquisitionForHO_r9_fdd.interFreqSI_AcquisitionForHO_r9_fdd,nei_cell_si_acq_r9.interFreqSI_AcquisitionForHO_r9_fdd.interFreqSI_AcquisitionForHO_r9_fdd,OTA and OTA BY OP,no,no,no,no,"This parameter defines whether the UE supports in LTE FDD mode, upon configuration of si-RequestForHO by the network, acquisition of relevant information from a neighbouring inter-frequency cell by reading the SI of the neighbouring cell using autonomous gaps and reporting the acquired information to the network as specified in TS 36.331.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,configure the value in MCF tool and push the info in UE.,Pass,,,,
7322,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",interFreqSI_AcquisitionForHO_r9_tdd,nei_cell_si_acq_r9.interFreqSI_AcquisitionForHO_r9_tdd,OTA and OTA BY OP,no,no,no,no,"This parameter defines whether the UE supports in LTE TDD mode, upon configuration of si-RequestForHO by the network, acquisition of relevant information from a neighbouring inter-frequency cell by reading the SI of the neighbouring cell using autonomous gaps and reporting the acquired information to the network as specified in TS 36.331.",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,configure in MCF tool and push to UE,Pass,,,,
@@ -7471,8 +7471,8 @@
7516,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",multi_ACK_CSI_reporting_r11.multi_ACK_CSI_reporting_r11,tdd_add_ue_eutra_cap_r11.multi_ACK_CSI_reporting_r11.multi_ACK_CSI_reporting_r11,OTA and OTA BY OP,no,no,no,no,This field defines whether the UE supports multi-cell HARQ ACK and periodic CSI reporting and SR on PUCCH format 3 if the UE supports FDD carrier aggregation with more than two DL component carriers or TDD carrier aggregation.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
7517,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",rsrq_meas_wideband_r11,tdd_add_ue_eutra_cap_r11.rsrq_meas_wideband_r11,OTA and OTA BY OP,no,no,no,no,This field defines whether the UE can perform RSRQ measurements in RRC_IDLE and RRC_CONNECTED with wider bandwidth as specified in TS 36.133.,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
7518,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",rsrq_meas_wideband_r11.rsrq_meas_wideband_r11,tdd_add_ue_eutra_cap_r11.rsrq_meas_wideband_r11.rsrq_meas_wideband_r11,OTA and OTA BY OP,no,no,no,no,This field defines whether the UE can perform RSRQ measurements in RRC_IDLE and RRC_CONNECTED with wider bandwidth as specified in TS 36.133.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
-7519,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",ss_CCH_interf_Handl_r11,tdd_add_ue_eutra_cap_r11.ss_CCH_interf_Handl_r11,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports synchronisation signal and common channel interference handling if the UE supports crs-InterfHandl-r11. It is mandatory for UEs of this release of the specification to support this feature for TDD bands, except for Category 0, M1, 1bis and M2 UEs.",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Enhanced Inter-Cell Interference Control (ICIC) for non-Carrier Aggregation (CA) based deployments of heterogeneous networks for LTE - eICIC_LTE (eICIC),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
-7520,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",ss_CCH_interf_Handl_r11.ss_CCH_interf_Handl_r11,tdd_add_ue_eutra_cap_r11.ss_CCH_interf_Handl_r11.ss_CCH_interf_Handl_r11,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports synchronisation signal and common channel interference handling if the UE supports crs-InterfHandl-r11. It is mandatory for UEs of this release of the specification to support this feature for TDD bands, except for Category 0, M1, 1bis and M2 UEs.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Enhanced Inter-Cell Interference Control (ICIC) for non-Carrier Aggregation (CA) based deployments of heterogeneous networks for LTE - eICIC_LTE (eICIC),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
+7519,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",ss_CCH_interf_Handl_r11,tdd_add_ue_eutra_cap_r11.ss_CCH_interf_Handl_r11,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports synchronisation signal and common channel interference handling if the UE supports crs-InterfHandl-r11. It is mandatory for UEs of this release of the specification to support this feature for TDD bands, except for Category 0, M1, 1bis and M2 UEs.",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Enhanced Inter-Cell Interference Control (ICIC) for non-Carrier Aggregation (CA) based deployments of heterogeneous networks for LTE - eICIC_LTE (eICIC),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Pass,,,,
+7520,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",ss_CCH_interf_Handl_r11.ss_CCH_interf_Handl_r11,tdd_add_ue_eutra_cap_r11.ss_CCH_interf_Handl_r11.ss_CCH_interf_Handl_r11,OTA and OTA BY OP,no,no,no,no,"This field defines whether the UE supports synchronisation signal and common channel interference handling if the UE supports crs-InterfHandl-r11. It is mandatory for UEs of this release of the specification to support this feature for TDD bands, except for Category 0, M1, 1bis and M2 UEs.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Enhanced Inter-Cell Interference Control (ICIC) for non-Carrier Aggregation (CA) based deployments of heterogeneous networks for LTE - eICIC_LTE (eICIC),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Pass,,,,
7521,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",tx_div_PUCCH1b_ch_select_r11,tdd_add_ue_eutra_cap_r11.tx_div_PUCCH1b_ch_select_r11,OTA and OTA BY OP,no,no,no,no,This field defines whether the UE supports transmit diversity for PUCCH format 1b with channel selection if the UE supports carrier aggregation and two-AntennaPortsForPUCCH-r10. UE supporting txDiv-PUCCH1b-ChSelect shall support configuration of PUCCH-ConfigDedicated-v13c0.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Carrier Aggregation for LTE - CA (Simultaneous PUCCH and PUSCH),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
7522,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",tx_div_PUCCH1b_ch_select_r11.tx_div_PUCCH1b_ch_select_r11,tdd_add_ue_eutra_cap_r11.tx_div_PUCCH1b_ch_select_r11.tx_div_PUCCH1b_ch_select_r11,OTA and OTA BY OP,no,no,no,no,This field defines whether the UE supports transmit diversity for PUCCH format 1b with channel selection if the UE supports carrier aggregation and two-AntennaPortsForPUCCH-r10. UE supporting txDiv-PUCCH1b-ChSelect shall support configuration of PUCCH-ConfigDedicated-v13c0.Use 0 or 1 to indicatebit 0:0:Not supportedbit 1:1:Supported,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Carrier Aggregation for LTE - CA (Simultaneous PUCCH and PUSCH),4G,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
7523,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",feature_group_ind_add_r9,tdd_add_ue_eutra_cap_r9.feature_group_ind_add_r9,Not Support,no,no,no,no,NO USE,UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -8005,12 +8005,12 @@
8061,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",accept_network_act_pdn.accept_network_act_pdn,cm_info.accept_network_act_pdn.accept_network_act_pdn,Not Support,no,no,no,no,Support Network Activated PDN,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,,Untested,,,,
8062,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",accept_public_wifi,cm_info.accept_public_wifi,OTA and OTA BY OP,no,no,no,no,Support XCAP over public Wifi<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>modify the configuration via MCF<BR>enable OTA file<BR>[Test Step]<BR>enable wifi<BR>enable wifi-calling<BR>enter flight mode<BR>get call forwarding setting via XCAP<BR>get the accept_public_wifi via ELT log<BR>[Expected Result]<BR>accept_public_wifi value is modified.,Pass,,,,
8063,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",accept_public_wifi.accept_public_wifi,cm_info.accept_public_wifi.accept_public_wifi,Not Support,no,no,no,no,Support XCAP over public Wifi,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:Enabled<BR>bit 0:Disabled,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8064,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",apn_selection_rule,cm_info.apn_selection_rule,OTA and OTA BY OP,no,no,no,no,XCAP APN Selection Rule<BR>1:Dedicated XCAP APN Only<BR>2:Default APN Only<BR>3:Try Dedicated XCAP APN and then Default APN<BR>4:Try Default APN and then Dedicated XCAP APN<BR>5:No Need PDN<BR>,UNSIGNED CHAR,1,,,without custom option: 0x03<BR>3,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Dedicated XCAP APN Only<BR>2:Default APN Only<BR>3:Try Dedicated XCAP APN and then Default APN<BR>4:Try Default APN and then Dedicated XCAP APN<BR>5:No Need PDN,,,"XCAP_SUPPORT, __NOT_TRY_DEFAULT_APN_FOR_XCAP__",XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>modify the configuration via MCF<BR>enable OTA file<BR>[Test Step]<BR>get call forwarding setting via XCAP<BR>get the apn_selection_rule via ELT log<BR>[Expected Result]<BR>apn_selection_rule value is modified.,Pass,,,,
+8064,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",apn_selection_rule,cm_info.apn_selection_rule,OTA and OTA BY OP,no,no,no,no,XCAP APN Selection Rule<BR>1:Dedicated XCAP APN Only<BR>2:Default APN Only<BR>3:Try Dedicated XCAP APN and then Default APN<BR>4:Try Default APN and then Dedicated XCAP APN<BR>5:No Need PDN<BR>6:Prefer Cellular XCAP APN and then other XCAP APN and then Default APN,UNSIGNED CHAR,1,,,without custom option: 0x03<BR>3,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Dedicated XCAP APN Only<BR>2:Default APN Only<BR>3:Try Dedicated XCAP APN and then Default APN<BR>4:Try Default APN and then Dedicated XCAP APN<BR>5:No Need PDN,,,"XCAP_SUPPORT, __NOT_TRY_DEFAULT_APN_FOR_XCAP__",XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>modify the configuration via MCF<BR>enable OTA file<BR>[Test Step]<BR>get call forwarding setting via XCAP<BR>get the apn_selection_rule via ELT log<BR>[Expected Result]<BR>apn_selection_rule value is modified.,Pass,,,,
8065,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",apn_selection_rule.apn_selection_rule,cm_info.apn_selection_rule.apn_selection_rule,Not Support,no,no,no,no,XCAP APN Selection Rule,BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:APN type "XCAP" only<BR>0x04:APN type "DEFAULT" then "XCAP"<BR>0x03:APN type "XCAP" then "DEFAULT"<BR>0x02:APN type "DEFAULT" only,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8066,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",pdn_reject_code,cm_info.pdn_reject_code,OTA and OTA BY OP,no,no,no,no,16 set of PDN Reject codes for CSFB always<BR>,UNSIGNED SHORT,32,16,,0x0000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>modify the APN XCAP used to make it fail by Android UI.<BR>run XCAP to see what reject code it is now.<BR>modify the reject code via MCF<BR>enable OTA file<BR>[Test Step]<BR>get call forwarding setting via XCAP.<BR>[Expected Result]<BR>SS is set to always CS fallback until reboot.,Pass,,,,
8067,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",pdn_releasing_timer,cm_info.pdn_releasing_timer,OTA and OTA BY OP,no,no,no,no,XCAP PDN releasing timer (in seconds)<BR>0~255:XCAP PDN releasing timer (in seconds)<BR>,UNSIGNED SHORT,2,,,2,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>modify the configuration via MCF<BR>enable OTA file<BR>[Test Step]<BR>get call forwarding setting via XCAP<BR>get the pdn_releasing_timer via ELT log<BR>[Expected Result]<BR>pdn_releasing_timervalue is modified.,Pass,,,,
8068,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",pdn_retry_times,cm_info.pdn_retry_times,OTA and OTA BY OP,no,no,no,no,PDN Retry times<BR>0~255:PDN Retry times (in seconds)<BR>,UNSIGNED CHAR,1,,,2,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>delete the APN which is used by XCAP by Android UI<BR>modify the configuration via MCF<BR>enable OTA file<BR>[Test Step]<BR>get call forwarding setting via XCAP<BR>get the pdn_retry_times via ELT log<BR>[Expected Result]<BR>check if the PDN retry time is same as MCF setting,Pass,,,,
-8069,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",pdn_wait_ps_reg_time,cm_info.pdn_wait_ps_reg_time,OTA and OTA BY OP,no,no,no,no,XCAP PDN establishment waiting PS registration time (in seconds)<BR>0~65536:XCAP PDN establishment waiting PS registration time (in seconds),UNSIGNED SHORT,2,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>modify the configuration via MCF<BR>enable OTA file<BR>[Test Step]<BR>enable wifi<BR>enable wifi-calling<BR>enter flight mode<BR>get call forwarding setting via XCAP<BR>get the pdn_wait_ps_reg_time via ELT log<BR>[Expected Result]<BR>pdn_wait_ps_reg_time timeout value is modified.,Untested,,,,
+8069,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",pdn_wait_ps_reg_time,cm_info.pdn_wait_ps_reg_time,OTA and OTA BY OP,no,no,no,no,XCAP PDN establishment waiting PS registration time (in seconds)<BR>0~65536:XCAP PDN establishment waiting PS registration time (in seconds),UNSIGNED SHORT,2,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]<BR>modify the configuration via MCF<BR>enable OTA file<BR>[Test Step]<BR>enable wifi<BR>enable wifi-calling<BR>enter flight mode<BR>get call forwarding setting via XCAP<BR>get the pdn_wait_ps_reg_time via ELT log<BR>[Expected Result]<BR>pdn_wait_ps_reg_time timeout value is modified.,Pass,,,,
8070,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",enable_tmpi_header,gba_info.enable_tmpi_header,OTA and OTA BY OP,no,no,no,no,GBA needs TMPI header<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:"Enabled"<BR>0:"Disabled",,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,This test only can do in RD IT from check user agent header.<BR><BR>Test in machine (Y/N) N<BR>Test Time (minutes) 5<BR> [Init] Insert a supported XCAP SIM card<BR> [Test Step]<BR> 1. Config to 1 (Enabled) <BR> 2. Execute call forwarding<BR> [Expected Result]<BR> check user agent has 3gpp-gba-tmpi in HTTP header,Pass,,,,
8071,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",enable_tmpi_header.enable_tmpi_header,gba_info.enable_tmpi_header.enable_tmpi_header,Not Support,no,no,no,no,GBA needs TMPI headerbit 0:0:Disabledbit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
8072,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",gba_connection_timeout,gba_info.gba_connection_timeout,OTA and OTA BY OP,no,no,no,no,GBA HTTP Connection Timeout Value (in seconds)<BR>0~65535:unsigned integer for GBA HTTP connection timeout in seconds<BR>,UNSIGNED SHORT,2,,,20,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,"This test only can do in RD IT, observe gba timeout is as expected.<BR> [Init] Insert a supported XCAP SIM card<BR> [Test Step]<BR> 1. Config gba timeout to 10s<BR> 3. Execute call forwarding<BR> [Expected Result]<BR> check http connection timeout value in lower layer (HTTP).",Pass,,,,
@@ -8209,114 +8209,114 @@
8287,1541,NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID,"1,2",reserve2,mapping_table[0~49].reserve2,OTA,no,no,no,no,Reserved for the future use,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,__SBP_NVRAM_MAP_EMM_CAUSE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
8288,1541,NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID,"1,2",reserve3,mapping_table[0~49].reserve3,OTA,no,no,no,no,Reserved for the future use,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,__SBP_NVRAM_MAP_EMM_CAUSE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
8289,1541,NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID,"1,2",sim_plmn,mapping_table[0~49].sim_plmn,OTA,no,no,no,no,PLMN ID derived from SIM IMSI,UNSIGNED CHAR,3,3,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,__SBP_NVRAM_MAP_EMM_CAUSE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8290,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8291,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8292,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8293,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8294,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8295,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8296,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8297,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8298,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8299,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8300,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8301,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8302,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8303,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8304,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8305,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8306,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8307,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8308,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8309,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8310,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8311,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8312,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8313,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8314,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8315,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8316,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8317,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8318,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8319,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8320,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8321,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8322,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8323,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8324,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8325,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8326,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8327,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8328,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8329,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8330,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8331,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8332,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8333,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8334,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8335,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8336,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8337,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8338,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8339,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8340,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8341,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8342,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8343,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8344,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8345,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8346,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8347,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8348,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8349,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8350,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8351,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8352,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8353,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8354,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8355,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8356,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8357,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8358,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8359,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8360,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8361,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8362,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8363,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8364,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8365,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8366,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8367,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8368,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8369,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8370,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8371,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8372,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8373,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8374,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8375,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8376,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8377,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8378,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8379,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8380,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8381,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8382,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8383,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8384,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8385,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8386,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8387,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8388,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8389,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8390,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8391,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8392,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8393,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8394,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8395,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8396,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
-8397,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8290,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8291,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8292,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8293,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8294,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8295,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8296,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8297,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8298,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table10.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8299,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8300,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8301,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8302,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8303,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8304,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8305,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8306,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8307,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table11.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8308,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8309,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8310,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8311,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8312,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8313,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8314,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8315,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8316,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table12.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8317,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8318,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8319,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8320,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8321,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8322,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8323,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8324,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8325,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table13.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8326,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8327,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8328,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8329,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8330,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8331,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8332,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8333,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8334,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table14.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8335,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8336,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8337,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8338,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8339,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8340,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8341,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8342,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8343,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table15.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8344,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8345,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8346,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8347,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8348,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8349,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8350,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8351,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8352,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table16.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8353,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8354,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8355,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8356,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8357,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8358,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8359,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8360,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8361,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table17.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8362,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8363,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8364,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8365,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8366,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8367,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8368,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8369,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8370,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table18.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8371,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8372,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8373,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8374,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8375,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8376,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8377,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8378,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8379,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table19.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8380,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8381,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8382,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8383,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8384,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8385,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8386,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8387,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8388,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table20.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8389,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband1.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8390,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband1.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8391,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband1.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,9420,NR15.R3.MD700.IVT.MP1MR3.MP,,9420,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8392,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband2.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8393,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband2.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8394,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband2.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,10050,NR15.R3.MD700.IVT.MP1MR3.MP,,10050,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8395,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDPCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband3.TxDPCH_power_offset,OTA,no,no,no,no,"normal offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8396,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,TxDSCH_power_offset,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband3.TxDSCH_power_offset,OTA,no,no,no,no,"16QAM offset, unit 1/32 dB",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
+8397,60180,NVRAM_EF_AST_TL1_RF_PARAM_LID,1,freq,SAR_TxPower_Offset[0~15].TxPower_offset_Table9.TxPower_offset_Subband3.freq,OTA,no,no,no,no,UARFCN,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
8398,2191,NVRAM_EF_D2_MCF_APN_CFG_LID,1,apn,apn_cfg[0~9].apn,OTA BY OP,no,no,no,no,"[MCF]APN Name;APN Name is used as an apn setting,<BR>[Note] Should add null character '\0' at the end of the character string when editing this parameter by MCF tool.",UNSIGNED CHAR,128,128,,0x0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,"[Test in machine]<BR>Yes<BR>[Test time]<BR>3 Minutes<BR>[Init.]<BR>Prepare an internal phone, SIM card<BR>[Test Step]<BR>1. Boot up phone<BR>2. Insert SIM card<BR>[Expected Result]<BR>1. The phone can attach to network successfully<BR>2. Use MCF dump and check whether dumped value is the same as the configured one by MCF tool.",Pass,,,,
8399,2191,NVRAM_EF_D2_MCF_APN_CFG_LID,1,authtype,apn_cfg[0~9].authtype,OTA BY OP,no,no,no,no,[MCF] Authentication type used for this APN setting to do any PDN related manipulation.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>2:CHAP<BR>1:PAP,,,,MD Config,Modem - Customer Requirement,,,"[Test in machine]<BR>Yes<BR>[Test time]<BR>3 Minutes<BR>[Init.]<BR>Prepare an internal phone, SIM card<BR>[Test Step]<BR>1. Boot up phone<BR>2. Insert SIM card<BR>[Expected Result]<BR>1. The phone can attach to network successfully<BR>2. Use MCF dump and check whether dumped value is the same as the configured one by MCF tool.",Pass,,,,
8400,2191,NVRAM_EF_D2_MCF_APN_CFG_LID,1,authtype.authtype,apn_cfg[0~9].authtype.authtype,OTA BY OP,no,no,no,no,[MCF]Authentication Type<BR><BR>bit 0:0:NONE<BR>bit 1:1:PAP<BR>bit 2:2:CHAP<BR> Authentication type used for this APN setting to do any PDN related manipulation.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>2:CHAP<BR>1:PAP,,,,MD Config,Modem - Customer Requirement,,,"[Test in machine]<BR>Yes<BR>[Test time]<BR>3 Minutes<BR>[Init.]<BR>Prepare an internal phone, SIM card<BR>[Test Step]<BR>1. Boot up phone<BR>2. Insert SIM card<BR>[Expected Result]<BR>1. The phone can attach to network successfully<BR>2. Use MCF dump and check whether dumped value is the same as the configured one by MCF tool.",Pass,,,,
@@ -8348,41 +8348,41 @@
8426,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_dereg_poor_wifi,ipol_ans_cfg.ipol_ims_dereg_poor_wifi,OTA and OTA BY OP,no,no,no,no,"[MCF]When enable and wans_ims_cs_pref_enable is disabled UE will de-register IMS on WLAN, if WLAN RSSI is below HO Low threshold<BR>",UNSIGNED CHAR,1,,,KAL_FALSE,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,[Init]<BR>VoWiFi is registered<BR>[Test Step]<BR>WiFi RSSI decreases<BR>[Expected Result]<BR>VoWiFi is deregistered,Pass,,,,
8427,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_dereg_poor_wifi_enable,ipol_ans_cfg.ipol_ims_dereg_poor_wifi_enable,OTA and OTA BY OP,no,no,no,no,"[MCF]When enable, UE will de-register IMS on WLAN, if WLAN RSSI value is below HO Low threshold<BR>",UNSIGNED CHAR,1,,,KAL_FALSE,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,Test in machine (Y)<BR>Test Time (0.5)<BR>[Init]<BR>WiFi associated<BR>[Test Step]<BR>WiFi RSSI decreases<BR>[Expected Result]<BR>VoWiFi icon off,Pass,,,,
8428,59686,NVRAM_EF_L1_2G_RF_PARAMETER_LID,1,TXD_ENABLE,RF_TX_PowerDetect_Variable.TXD_ENABLE,OTA,no,no,yes,no,,ENUM,5,5,,RF_TX_PowerDetect_Variable.TXD_ENABLE[0]:0<BR>RF_TX_PowerDetect_Variable.TXD_ENABLE[1]:0<BR>RF_TX_PowerDetect_Variable.TXD_ENABLE[2]:0<BR>RF_TX_PowerDetect_Variable.TXD_ENABLE[3]:0<BR>RF_TX_PowerDetect_Variable.TXD_ENABLE[4]:0,NR15.R3.MD700.IVT.MP1MR3.MP,,L1D_TXD_ENABLE:Enable TXD<BR>L1D_TXD_DISABLE:Disable TXD,,,,2G RXD(Receiver Diversity),2G,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
-8429,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_2G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,modem_sbp_config[106].SBP_2G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,OTA and OTA BY OP,no,no,no,yes,"UE uses network broadcasted Qrxlevmin value to evaluate EUTRAN cell's S_non_serving value. Wen the SBP is enabled, UE shall use the customized Qrxlevmin value to evaluate EUTRAN cell's S_non_serving value. This SBP need to Enable when "SBP_IRAT_PINGPONG_REDUCTION" is Enabled.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Not enabled,,,__2G4_RESEL_CUSTOM_QRXLEVMIN__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-8430,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_BARR_CELL_IF_ECC_ESTABLISHMENT_FAIL,modem_sbp_config[106].SBP_BARR_CELL_IF_ECC_ESTABLISHMENT_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable the cell barring feature when emergency call establishment fails<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-8431,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_CAPABILITY_SIZE_TABLE_FILTER,modem_sbp_config[105].SBP_CAPABILITY_SIZE_TABLE_FILTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>use capability size reduction table to filter the EUTRA Capability CA band combinations reporting<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE filters out unnecessary CA band combinations in the EUTRA Capability reporting according to the capability size reduction table.<BR>0:Not enabled. UE doesn't filter CA band combinations in the EUTRA Capability reporting by capability size reduction table table.,,,"If compile option __DISABLE_CAPABILITY_SIZE_TABLE_FILTER__ is defined, the SBP value is 0. If you want to use this feature, please set feature option LTE_CA_TBL_V2_SUPPORT to TRUE.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-8432,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_CA_SELECTION_TABLE_FILTER,modem_sbp_config[105].SBP_CA_SELECTION_TABLE_FILTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>use ca selection table to select CA combinations in the EUTRA Capability reporting.<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE uses CA selection table to select CA band combinations in the EUTRA Capability reporting.<BR>0:Not enabled. UE doesn't use CA selection table to select CA band combinations in the EUTRA Capability reporting.,,,"If compile option __DISABLE_CA_SELECTION_TABLE_FILTER__ is defined, the SBP value is 0. If you want to use this feature, please set feature option LTE_CA_TBL_V2_SUPPORT to TRUE.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-8433,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_CSFB_WAIT_IMS_RSP,modem_sbp_config[105].SBP_CSFB_WAIT_IMS_RSP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When IMS CALL ongoing, need IMS response to judge whether performing CSFB or not<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,__SBP_CSFB_WAIT_IMS_RSP__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8434,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_DDM_SHOW_DATA_ICON,modem_sbp_config[105].SBP_DDM_SHOW_DATA_ICON,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Send dcchg to AP to show data icon when IA reattach.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,this parameter does not support MCF,Untested,,,,
-8435,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_ENABLE_CARRIER_RESTRICTION,modem_sbp_config[106].SBP_ENABLE_CARRIER_RESTRICTION,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Carrier Restriction feature<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM ME Lock,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8429,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_2G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,modem_sbp_config[106].SBP_2G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Not enabled,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+8430,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_BARR_CELL_IF_ECC_ESTABLISHMENT_FAIL,modem_sbp_config[106].SBP_BARR_CELL_IF_ECC_ESTABLISHMENT_FAIL,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable the cell barring feature when ecc call establishment fails.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This feature is controlled by __SBP_BARR_CELL_IF_ECC_ESTABLISHMENT_FAIL__.,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8431,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_CAPABILITY_SIZE_TABLE_FILTER,modem_sbp_config[105].SBP_CAPABILITY_SIZE_TABLE_FILTER,OTA and OTA BY OP,no,no,no,yes,"Some operators don't upgrade their legacy network equipments so that the full-sized UE Capability information of feature-rich mobile terminal cannot be stored completely by network node (e.g. MME). The consequence could be that UE fails to attach network or inter-RAT procedure (e.g. SRVCC Handover) cannot be triggered.<BR> To prevent this kind of interoperability problem, MTK maintains a Capability size reduction table (mcu/custom/protocol/common/ps/custom_lte_ca.xls, CapabilitySizeBand1Band253/CapabilitySizeBand254Band256 tab) according to worldwide LTE network deployment information. By the MCC or PLMN Identity on where the UE has camped, disallowed corresponding CA band combinations are filtered accordingly so that the size of EUTRA Capability is smaller.<BR> This table put some countries which really happened issue.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE filters out unnecessary CA band combinations in the EUTRA Capability reporting according to the capability size reduction table.<BR>0:Not enabled. UE doesn't filter CA band combinations in the EUTRA Capability reporting by capability size reduction table table.,,,"If compile option __DISABLE_CAPABILITY_SIZE_TABLE_FILTER__ is defined, the SBP value is 0.<BR>If you want to use this feature, please set feature option LTE_CA_TBL_V2_SUPPORT to TRUE.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+8432,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_CA_SELECTION_TABLE_FILTER,modem_sbp_config[105].SBP_CA_SELECTION_TABLE_FILTER,OTA and OTA BY OP,no,no,no,yes,"In 3GPP spec, it defines only 128 single bands and CA band combinations are allowed to report to network when requestedFrequencyBands is not set in UECapabilityEnquiry from network.<BR> If UE can only report 128 single bands and CA band combinations to network, it causes UE need to select some CA band combinations which are useful for this operator to report to network.<BR> Otherwise, the throughput could be downgrade if the useful CA band combination is not reported.<BR> MTK maintains a CA selection table ( mcu/custom/protocol/common/ps/ custom_lte_ca.xls, CASelectionBand1Band253/CASelectionBand254Band256 tab) according to worldwide LTE network deployment information. By the MCC or PLMN Identity on where the UE has camped, UE only reports selected CA band combinations.<BR>If 1 - this SBP is enabled and 2- Network doesn't configure requestedFrequencyBands or UE doesn't support freqBandRetrieval and 3. we found that the total number of single bands and CA band combinations are lager than 128, the selected CA band combinations in CA selection table will be reported in EUTRA Capability.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE uses CA selection table to select CA band combinations in the EUTRA Capability reporting.<BR>0:Not enabled. UE doesn't use CA selection table to select CA band combinations in the EUTRA Capability reporting.,,,"If compile option __DISABLE_CA_SELECTION_TABLE_FILTER__ is defined, the SBP value is 0.<BR>If you want to use this feature, please set feature option LTE_CA_TBL_V2_SUPPORT to TRUE.",MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+8433,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_CSFB_WAIT_IMS_RSP,modem_sbp_config[105].SBP_CSFB_WAIT_IMS_RSP,OTA and OTA BY OP,no,no,no,yes,"When IMS CALL is ongoing, UE receive a CSFB CALL right away.<BR>However, IMS doesn't response IMS CALL fail, so EMM still think IMS CALL is ongoing and abort CSFB CALL.<BR>If enable this SBP, UE will handle or abort CSFB CALL until IMS report previous IMS call fail.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,This SBP can be controlled by compile option __SBP_CSFB_WAIT_IMS_RSP__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8434,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_DDM_SHOW_DATA_ICON,modem_sbp_config[105].SBP_DDM_SHOW_DATA_ICON,Not Support,no,no,no,yes,"Send dcchg, 129 for Reset timer to show data icon when IA reattach. If this SBP is enabled, this feature will work.",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This SBP can be controlled by compile option __DDM_SHOW_DATA_ICON__,MD Config,Modem - Customer Requirement,,,this parameter does not support MCF,Untested,,,,
+8435,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_ENABLE_CARRIER_RESTRICTION,modem_sbp_config[106].SBP_ENABLE_CARRIER_RESTRICTION,Not Support,no,no,no,yes,This SBP is used to enable/disable carrier restriction feature,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP is present under compilation flag __CARRIER_RESTRICTION__ which is used in setting the SBP value.<BR>The compile option __CARRIER_RESTRICTION__ is used in enabling or disabling the feature.,SIM ME Lock,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8436,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_FULLRAS_DISABLED,modem_sbp_config[105].SBP_FULLRAS_DISABLED,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To Enable full RAS<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Y<BR>20 MIN<BR>CAMP ON CELL <BR>MAKE MT/MO CALL <BR>MODEM SHOULD USE ONLY MAIN +DIV ANTENNA ALWAYS WHEN THIS SBP VALUE IS ZERO AND HW SUPPORT TWO ANTENNA,Pass,,,,
-8437,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Modem and GPS chip timing synchronization for LTE<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-8438,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE_SIB,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE_SIB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Get GNSS time information through LTE SIB<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-8439,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Modem and GPS chip timing synchronization for NR<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-8440,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR_SIB,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR_SIB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Get GNSS time information through NR SIB<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-8441,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_WCDMA,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_WCDMA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Modem and GPS chip timing synchronization for WCDMA<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-8443,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_QUEUE_PS_PAGING,modem_sbp_config[105].SBP_QUEUE_PS_PAGING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not queue ps paging in a period time<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE filters out unnecessary CA band combinations in the EUTRA Capability reporting according to the capability size reduction table.<BR>0:Not enabled. UE doesn't filter CA band combinations in the EUTRA Capability reporting by capability size reduction table table.,,,__DISABLE_SBP_QUEUE_PS_PAGING__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8444,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_REFLECTIVE_QOS_SUPPORT,modem_sbp_config[105].SBP_REFLECTIVE_QOS_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE supports Reflective QoS<BR>bit 0:0:Not supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,R15 baseline 5G,5G Baseline,,,NA,Pass,,,,
-8445,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PMM_CONNECTED,modem_sbp_config[105].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PMM_CONNECTED,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>During Manual PLMN list Req, release PS signaling connection<BR>bit 0:0:During Manual PLMN list Req, keep PS signaling connection<BR>bit 1:1:During Manual PLMN list Req, release PS signaling connection(if not released by NW)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated<BR>0x00:During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivated",,,__SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PMM_CONNECTED__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) :Y<BR> Test Time (minutes) : 10 mins <BR> [Init] DUT boot up <BR> [Test Step] > Trigger CS and PS registration in 3G<BR>-> Once the CS and PS registration is complete and the PS signalling is not released, then Trigger manual PLMN list request from higher layers<BR>-> GMM shall start a timer of 10s (providing an time window to allow NW to move out from RRCE connected (FACH/DCH))<BR>->On timer expiry, if GMM is still in PMM connected state, GMM shall request RRCE to trigger SCRI(with cause as others) <BR> [Expected Result]<BR> On timer expiry, if GMM is still in PMM connected state, GMM shall request RRCE to trigger SCRI(with cause as others )",Pass,,,,
-8446,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[53].SBP_2G_AFR_PREFER_OVER_NW_REDIRECT,modem_sbp_data_config[53].SBP_2G_AFR_PREFER_OVER_NW_REDIRECT,OTA and OTA BY OP,no,no,no,yes,This SBP provides priority to AFR when redirection information present in channel release <BR>message for 2G RAT.<BR>bit 0: Indicates AFR is priority over 2G redirection <BR>bit 1: Indicates AFR is priority over 3G redirection<BR>bit 2: Indicates AFR is priority over 4G redirection<BR>bit 3: Spare bit value always 0 <BR>bit 4: Spare bit value always 0<BR>bit 5: Spare bit value always 0<BR>bit 6: Spare bit value always 0<BR>bit 7: Spare bit value always 0,BIT,8,,8,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00:Any RAT Redirection is priority over AFR<BR>0x01:AFR is priority over 2G redirection, 3G and LTE redirection is priority over AFR<BR>0x02:AFR is priority over 3G redirection, 2G and LTE redirection is priority over AFR<BR>0x07:AFR is priority over any RAT redirection<BR>0x04:AFR is priority over LTE redirection, 2G and 3G redirection is priority over AFR<BR>0x05:AFR is priority over LTE and 2G redirection, 3G redirection is priority over AFR<BR>0x06:AFR is priority over LTE and 3G redirection, 2G redirection is priority over AFR<BR>0x03:AFR is priority over 2G and 3G redirection, LTE redirection is priority over AFR",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-8447,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[54].SBP_3G_AFR_PREFER_OVER_NW_REDIRECT,modem_sbp_data_config[54].SBP_3G_AFR_PREFER_OVER_NW_REDIRECT,Not Support,no,no,yes,no,"Configuration of SBP Data<BR>AFR is preferred over Network redirection on 2G 3G RAT<BR>bit 0:0:Any Redirection is priority over AFR<BR>bit 1:1:AFR is priority over 2G redirection, 3G and LTE redirection is priority over AFR<BR>bit 2:2:AFR is priority over 3G redirection, 2G and LTE redirection is priority over AFR<BR>bit 3:3:AFR is priority over 2G and 3G redirection, LTE redirection is priority over AFR<BR>bit 3:3:AFR is priority over 2G and 3G redirection, LTE redirection is priority over AFR<BR>bit 4:4:AFR is priority over LTE redirection, 2G and 3G redirection is priority over AFR<BR>bit 5:5:AFR is priority over LTE and 2G redirection, 3G redirection is priority over AFR<BR>bit 6:6:AFR is priority over LTE and 3G redirection, 2G redirection is priority over AFR<BR>bit 7:7:AFR is priority over any redirection",BIT,8,,8,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8448,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[43].SBP_3G_SIB_SKIP_ENABLE_FOR_ALL_PLMN,modem_sbp_data_config[43].SBP_3G_SIB_SKIP_ENABLE_FOR_ALL_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]This feature enables UE to SIB SKIP enable for PLMNs",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x01, 0x02",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8449,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[47].SBP_DISPLAY_NOT_SELECTABLE_PLMN,modem_sbp_data_config[47].SBP_DISPLAY_NOT_SELECTABLE_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Display Not-Selectable PLMN when PLMN List<BR>bit 0:0:do not display this PLMN when all cells are not selectable<BR>bit 1:1:display this PLMN even all cells are barred<BR>bit 2:2:display this PLMN even all cells are reserved-for-operator-use<BR>bit 3:3:display this PLMN even all cells are barred or reserved-for-operator-use",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Do not display this PLMN when all cells are not selectable<BR>3:Display this PLMN even all cells are barred or reserved-for-operator-use<BR>2:Display this PLMN even all cells are reserved-for-operator-use<BR>1:Display this PLMN even all cells are barred,,,__DISPLAY_SELECTABLE_PLMN_ONLY__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-8450,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[52].SBP_ECC_FULL_BAND_SEARCH_RAT_ORDER,modem_sbp_data_config[52].SBP_ECC_FULL_BAND_SEARCH_RAT_ORDER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>RAT order when full band searching for limited service.<BR>bit 0:0:0: CNLWG<BR>bit 1:1:1: CLWGN<BR>bit 2:2:2: CWGNL<BR>bit 3:3:3: CWGLN",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-8451,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[55].SBP_EMM_CONTROL_DCNR_BIT,modem_sbp_data_config[55].SBP_EMM_CONTROL_DCNR_BIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enabled/Disabled DCNR bit for FT testing<BR>bit 255:255:Normal Setting<BR>bit 0:0:Disable DCNR bit<BR>bit 1:1:Enable DCNR bit",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable DCNR bit<BR>0:Disable DCNR bit,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8452,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[57].SBP_EMM_CONTROL_EPCO_BIT,modem_sbp_data_config[57].SBP_EMM_CONTROL_EPCO_BIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enabled/Disabled Extended PCO bit for FT testing<BR>bit 255:255:Normal Setting<BR>bit 0:0:Disable Extended PCO bit<BR>bit 1:1:Enable Extended PCO bit",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable Extended PCO bit<BR>0:Disable Extended PCO bit,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8453,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[56].SBP_EMM_CONTROL_N1_MODE_BIT,modem_sbp_data_config[56].SBP_EMM_CONTROL_N1_MODE_BIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enabled/Disabled N1 mode bit for FT testing<BR>bit 255:255:Normal Setting<BR>bit 0:0:Disable N1 mode bit<BR>bit 1:1:Enable N1 mode bit",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable N1 mode bit<BR>0:Disable N1 mode bit,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8454,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[58].SBP_EMM_CONTROL_UE_STATUS_IE,modem_sbp_data_config[58].SBP_EMM_CONTROL_UE_STATUS_IE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enabled/Disabled UE status IE for FT testing<BR>bit 255:255:Normal Setting<BR>bit 0:0:Disable UE status IE<BR>bit 1:1:Enable UE status IE",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable UE status IE<BR>0:Disable UE status IE,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8455,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[50].SBP_EMM_PROC_FAIL_HANDLING_EXT,modem_sbp_data_config[50].SBP_EMM_PROC_FAIL_HANDLING_EXT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Extension options for EMM procedure fail handling.<BR>bit 0:0:All disabled<BR>bit 1:1:Enable extension: 1<BR>bit 2:2:Enable extension: 2<BR>bit 3:3:Enable extension: 1, 2",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:All disabled<BR>3: Enable extension:1, 2<BR>2: Enable extension:2<BR>1: Enable extension:1",,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8456,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[59].SBP_IGNORE_IR_REDIRECT_TO_LTE_WHEN_NO_CELL_THRESHOLD,modem_sbp_data_config[59].SBP_IGNORE_IR_REDIRECT_TO_LTE_WHEN_NO_CELL_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Extension options for EMM procedure fail handling.<BR>bit 0:0:All disabled<BR>bit 1:1:Threshold: 1 time<BR>bit 2:2:Threshold: 2 times<BR>bit 3:3:Threshold: 3 times<BR>bit 4:4:Threshold: 4 times<BR>bit 5:5:Threshold: 5 times<BR>bit 6:6:Threshold: 6 times<BR>bit 7:7:Threshold: 7 times<BR>bit 8:8:Threshold: 8 times<BR>bit 9:9:Threshold: 9 times<BR>bit 10:10:Threshold: 10 times<BR>bit 11:11:Threshold: 11 time<BR>bit 12:12:Threshold: 12 times<BR>bit 13:13:Threshold: 13 times<BR>bit 14:14:Threshold: 14 times<BR>bit 15:15:Threshold: 15 times<BR>bit 16:16:Threshold: 16 times<BR>bit 17:17:Threshold: 17 times<BR>bit 18:18:Threshold: 18 times<BR>bit 19:19:Threshold: 19 times<BR>bit 20:20:Threshold: 20 times",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Disabled<BR>0x01: Threshold:1 time<BR>0x02: Threshold:2 times<BR>0x14: Threshold:20 times<BR>0x04: Threshold:4 times<BR>....<BR>0x03: Threshold:3 times,,,No,,,,,,Pass,,,,
-8457,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[49].SBP_L2_REEST_CNT_THRESHOLD,modem_sbp_data_config[49].SBP_L2_REEST_CNT_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>CHR count threshold",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0x02 ~ 0x06,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Trigger REEST<BR> [Expected Result]<BR>UE repeort EM,Pass,,,,
-8458,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[48].SBP_L2_REEST_TMR_THRESHOLD,modem_sbp_data_config[48].SBP_L2_REEST_TMR_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>CHR timer threshold",BIT,8,,8,0x3c,NR15.R3.MD700.IVT.MP1MR3.MP,,0x23:35 seconds<BR>0x28:40 seconds<BR>0x3C:60 seconds<BR>0x32:50 seconds<BR>0x37:55 seconds<BR>0x2D:45 seconds<BR>0x1E:30 seconds,,,,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Trigger REEST<BR> [Expected Result]<BR>UE repeort EM,Pass,,,,
-8459,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[45].SBP_LCSP_RSP_TIME_ADJ,modem_sbp_data_config[45].SBP_LCSP_RSP_TIME_ADJ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Location service response time adjustment to compensate for network latency<BR>bit 0:0:Do not adjust response time<BR>bit 2:2:Reduce UE internal response time by 2s<BR>bit 3:3:Reduce UE internal response time by 3s",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Do not adjust response time<BR>3:Reduce UE internal response time by 3s<BR>2:Reduce UE internal response time by 2s,,,__LCSP_RSP_TIME_ADJ__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8460,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[46].SBP_LCSP_RSP_TIME_LB,modem_sbp_data_config[46].SBP_LCSP_RSP_TIME_LB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Location service response time adjustment lower bound<BR>bit 14:14:Response time adjustment lower bound is 14s<BR>bit 15:15:Response time adjustment lower bound is 15s<BR>bit 16:16:Response time adjustment lower bound is 16s<BR>bit 17:17:Response time adjustment lower bound is 17s<BR>bit 18:18:Response time adjustment lower bound is 18s<BR>bit 19:19:Response time adjustment lower bound is 19s<BR>bit 20:20:Response time adjustment lower bound is 20s",BIT,8,,8,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,18:Response time adjustment lower bound is 18s<BR>19:Response time adjustment lower bound is 19s<BR>17:Response time adjustment lower bound is 17s<BR>14:Response time adjustment lower bound is 14s<BR>15:15:Response time adjustment lower bound is 15s<BR>16:Response time adjustment lower bound is 16s<BR>20:Response time adjustment lower bound is 20s,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8461,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[60].SBP_MCF_ETWS_CONTROL_SWITCH,modem_sbp_data_config[60].SBP_MCF_ETWS_CONTROL_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>ETWS MCF SETTINGS<BR>bit 0:0:ETWS is not controlled by MCF<BR>bit 7:7:ETWS is controlled by MCF",BIT,8,,8,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-8462,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[44].SBP_MODIFY_RLC_FOR_SACCH_DECODE,modem_sbp_data_config[44].SBP_MODIFY_RLC_FOR_SACCH_DECODE,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to modify the value of Radio Link Counter(RLC) which is received in System Information 6 from 2G NW. Instead of using NW given RLC value, we will use RLC value based on SBP value set.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:default RLC value from Nw<BR>0x01:RLC received from n/w + 4<BR>0x02:RLC received from n/w + 12<BR>0x03:RLC received from n/w + 16<BR>0x08:RLC received from n/w + 36<BR>0x05:RLC received from n/w + 24<BR>0x06:RLC received from n/w + 28<BR>0x07:RLC received from n/w + 32<BR>0x04:RLC received from n/w + 20,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
-8463,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[51].SBP_NWSEL_LOCATION_BASED_ALTERNATIVE,modem_sbp_data_config[51].SBP_NWSEL_LOCATION_BASED_ALTERNATIVE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>location based alternative<BR>bit 0:0:Disable location-based<BR>bit 1:1:Enable Stored OP band sequence<BR>bit 2:2:Enable Stored Stored sequence",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~2,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-8464,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[61].SBP_POS_MODE_CAPABILITY_SWITCH,modem_sbp_data_config[61].SBP_POS_MODE_CAPABILITY_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Switch the positioning mode in UE reporting positioning capability to NW.<BR>bit 0:0:UE does not support AGPS<BR>bit 1:1:UE-Based<BR>bit 2:2:UE-Assisted<BR>bit 3:3:Both UE-Based and UE-Assisted",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE does not support AGPS<BR>3:Both UE-Based and UE-Assisted<BR>2:UE-Assisted<BR>1:UE-Based,,,__AGPS_SUPPORT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8437,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE,OTA and OTA BY OP,no,no,no,yes,This feature is used to keep GNSS(Global Navigation Satellite System) time in modem side. <BR>Modem provides GNSS time information to GPS chip when GPS open.<BR>It can help GPS chip to measure satellites signal.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,"To enable this feature, compile option __GNSS_MD_TIME_SYNC__ must be defined.",LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+8438,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE_SIB,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_LTE_SIB,OTA and OTA BY OP,no,no,no,yes,Modem gets GNSS time informatino from LTE SIB8/SIB16 and provides to GPS chip.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+8439,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR,OTA and OTA BY OP,no,no,no,yes,This feature is used to keep GNSS(Global Navigation Satellite System) time in modem side. <BR>Modem provides GNSS time information to GPS chip when GPS open.<BR>It can help GPS chip to measure satellites signal.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,"To enable this feature, compile option __GNSS_MD_TIME_SYNC__ must be defined.",LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+8440,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR_SIB,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_NR_SIB,OTA and OTA BY OP,no,no,no,yes,Modem gets GNSS time informatino from NR SIB9 and provides to GPS chip.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,N/A,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+8441,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_WCDMA,modem_sbp_config[104].SBP_GNSS_MD_TIME_SYNC_WCDMA,OTA and OTA BY OP,no,no,no,yes,This feature is used to keep GNSS(Global Navigation Satellite System) time in modem side. <BR>Modem provides GNSS time information to GPS chip when GPS open.<BR>It can help GPS chip to measure satellites signal.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,"To enable this feature, compile option __GNSS_MD_TIME_SYNC__ must be defined.",LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+8443,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_QUEUE_PS_PAGING,modem_sbp_config[105].SBP_QUEUE_PS_PAGING,OTA and OTA BY OP,no,no,no,yes,"Some networks has signalling protection mechanism. <BR>If UE sends SR more than 8 times in 60 secs, NW will give reject #15. <BR>Queue ps paging in a period time in CMCC to prevent frequently perform SR.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. UE filters out unnecessary CA band combinations in the EUTRA Capability reporting according to the capability size reduction table.<BR>0:Not enabled. UE doesn't filter CA band combinations in the EUTRA Capability reporting by capability size reduction table table.,,,User could use compile option __SBP_QUEUE_PS_PAGING__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8444,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_REFLECTIVE_QOS_SUPPORT,modem_sbp_config[105].SBP_REFLECTIVE_QOS_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, UE supports Reflective QoS (RQoS).<BR>Please refer to TS 23.501 and 24.501 for detail.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature could be enabled by defining the compile option __ENABLE_REFLECTIVE_QOS__,R15 baseline 5G,5G Baseline,,,NA,Pass,,,,
+8445,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[105].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PMM_CONNECTED,modem_sbp_config[105].SBP_REL_PS_CONN_DURING_MANUAL_PLMN_LIST_ON_PMM_CONNECTED,OTA,no,no,no,yes,"During Manual PLMN List request in 3G in PMM connected/established state, This SBP when enabled releases the PS signaling connection with NW (if not released by network) when no GMM signaling is ongoing.This is done through GUARD Timer.<BR>UE shall start GUARD timer (value of 10 secs) waiting for Network to release the PS signaling connection. On timer expiry UE shall release PS signaling connection (if not released by NW) by sending SCRI to network with cause "Others", irrespective of PS RAB exist or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:During Manual PLMN list Req, release PS signaling connection(if not released by NW) once all PDP gets deactivated<BR>0x00:During Manual PLMN list Req, keep PS signaling connection once all PDP gets deactivated",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) :Y<BR> Test Time (minutes) : 10 mins <BR> [Init] DUT boot up <BR> [Test Step] > Trigger CS and PS registration in 3G<BR>-> Once the CS and PS registration is complete and the PS signalling is not released, then Trigger manual PLMN list request from higher layers<BR>-> GMM shall start a timer of 10s (providing an time window to allow NW to move out from RRCE connected (FACH/DCH))<BR>->On timer expiry, if GMM is still in PMM connected state, GMM shall request RRCE to trigger SCRI(with cause as others) <BR> [Expected Result]<BR> On timer expiry, if GMM is still in PMM connected state, GMM shall request RRCE to trigger SCRI(with cause as others )",Pass,,,,
+8446,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[53].SBP_2G_AFR_PREFER_OVER_NW_REDIRECT,modem_sbp_data_config[53].SBP_2G_AFR_PREFER_OVER_NW_REDIRECT,OTA and OTA BY OP,no,no,no,yes,This SBP provides priority to AFR when redirection information present in channel release <BR>message for 2G RAT.<BR>bit 0: Indicates AFR is priority over 2G redirection <BR>bit 1: Indicates AFR is priority over 3G redirection<BR>bit 2: Indicates AFR is priority over 4G redirection<BR>bit 3: Spare bit value always 0 <BR>bit 4: Spare bit value always 0<BR>bit 5: Spare bit value always 0<BR>bit 6: Spare bit value always 0<BR>bit 7: Spare bit value always 0,BIT,8,,8,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00:Any RAT Redirection is priority over AFR<BR>0x01:AFR is priority over 2G redirection, 3G and LTE redirection is priority over AFR<BR>0x02:AFR is priority over 3G redirection, 2G and LTE redirection is priority over AFR<BR>0x07:AFR is priority over any RAT redirection<BR>0x04:AFR is priority over LTE redirection, 2G and 3G redirection is priority over AFR<BR>0x05:AFR is priority over LTE and 2G redirection, 3G redirection is priority over AFR<BR>0x06:AFR is priority over LTE and 3G redirection, 2G redirection is priority over AFR<BR>0x03:AFR is priority over 2G and 3G redirection, LTE redirection is priority over AFR",,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+8447,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[54].SBP_3G_AFR_PREFER_OVER_NW_REDIRECT,modem_sbp_data_config[54].SBP_3G_AFR_PREFER_OVER_NW_REDIRECT,Not Support,no,no,yes,no,This SBP provides priority to AFR when redirection information present in rrc connection release <BR>message in 3G.<BR>bit 0: used by 3G indicated AFR is priority over 2G redirection <BR>bit 1: used by 3G indicated AFR is priority over 3G redirection<BR>bit 2: used by 3G indicated AFR is priority over 4G redirection<BR>bit 3: Spare bit value always 0 <BR>bit 4: Spare bit value always 0<BR>bit 5: Spare bit value always 0<BR>bit 6: Spare bit value always 0<BR>bit 7: Spare bit value always 0,BIT,8,,8,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8448,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[43].SBP_3G_SIB_SKIP_ENABLE_FOR_ALL_PLMN,modem_sbp_data_config[43].SBP_3G_SIB_SKIP_ENABLE_FOR_ALL_PLMN,OTA and OTA BY OP,no,no,no,yes,"This SBP provides flexable configuration for SIB SKIP feature. Even if NW does not configure DMCR in SIB3, <BR>UE shall skip reading non-essential SIBs during camping time to speed up camping. UE will read the non-essential <BR>SIBs later on.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x01, 0x02",,,"Default value is "1" if with compile option __3G_SIB_SKIP_FOR_CSFB__, is "2" when with __3G_SIB_SKIP_FOR_ALL__",MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8449,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[47].SBP_DISPLAY_NOT_SELECTABLE_PLMN,modem_sbp_data_config[47].SBP_DISPLAY_NOT_SELECTABLE_PLMN,OTA and OTA BY OP,no,no,no,yes,"This SBP is to control the ways to show the result of PLMN list. In legacy design, all PLMN IDs including those are barred or reserved for operator use will be showed in the UI. If customers do not expect this behavior, we could configure the SBP data to change the way of showing these PLMN IDs in PLMN list.",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Do not display this PLMN when all cells are not selectable<BR>3:Display this PLMN even all cells are barred or reserved-for-operator-use<BR>2:Display this PLMN even all cells are reserved-for-operator-use<BR>1:Display this PLMN even all cells are barred,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+8450,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[52].SBP_ECC_FULL_BAND_SEARCH_RAT_ORDER,modem_sbp_data_config[52].SBP_ECC_FULL_BAND_SEARCH_RAT_ORDER,OTA and OTA BY OP,no,no,no,yes,This SBP provides different RAT order when full band searching for limited service.<BR>0x00: CNLWG<BR>0x01: CLWGN<BR>0x02: CWGLN<BR>0x03: CWGNL,BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,N/A,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+8451,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[55].SBP_EMM_CONTROL_DCNR_BIT,modem_sbp_data_config[55].SBP_EMM_CONTROL_DCNR_BIT,OTA and OTA BY OP,no,no,no,yes,This SBP provides tester to control DCNR bit in UE network capability IE and UE additional security capability IE would whether to be included or not in attach/TAU request.<BR>0xFF: the content of IE is decided by the UE's capability and blacklist instead of be controlled by tester<BR>0x00: disable DCNR bit even if UE supports ENDC<BR>0x01: enable DCNR bit if UE supports DCNR,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable DCNR bit<BR>0:Disable DCNR bit,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8452,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[57].SBP_EMM_CONTROL_EPCO_BIT,modem_sbp_data_config[57].SBP_EMM_CONTROL_EPCO_BIT,OTA and OTA BY OP,no,no,no,yes,This SBP provides tester to control Extended PCO bit in UE network capability IE would whether to be included or not in attach/TAU request.<BR>0xFF: the content of IE is decided by the UE's capability and blacklist instead of be controlled by tester<BR>0x00: disable Extended PCO bit even if N1 mode UE<BR>0x01: enable Extended PCO bit if N1 mode UE,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable Extended PCO bit<BR>0:Disable Extended PCO bit,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8453,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[56].SBP_EMM_CONTROL_N1_MODE_BIT,modem_sbp_data_config[56].SBP_EMM_CONTROL_N1_MODE_BIT,OTA and OTA BY OP,no,no,no,yes,This SBP provides tester to control N1 mode bit in UE network capability IE and UE additional security capability IE would whether to be included or not in attach/TAU request.<BR>0xFF: the content of IE is decided by the UE's capability and blacklist instead of be controlled by tester<BR>0x00: disable N1 mode bit even if N1 mode UE<BR>0x01: enable N1 mode bit if N1 mode UE,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable N1 mode bit<BR>0:Disable N1 mode bit,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8454,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[58].SBP_EMM_CONTROL_UE_STATUS_IE,modem_sbp_data_config[58].SBP_EMM_CONTROL_UE_STATUS_IE,OTA and OTA BY OP,no,no,no,yes,This SBP provides tester to control UE status IE would whether to be included or not in attach/TAU request.<BR>0xFF: the content of IE is decided by the UE's capability and blacklist instead of be controlled by tester<BR>0x00: disable UE status IE even if UE has 5G-GUTI<BR>0x01: enable UE status IE if UE has 5G-GUTI,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,256:Normal Setting<BR>1:Enable UE status IE<BR>0:Disable UE status IE,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8455,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[50].SBP_EMM_PROC_FAIL_HANDLING_EXT,modem_sbp_data_config[50].SBP_EMM_PROC_FAIL_HANDLING_EXT,OTA and OTA BY OP,no,no,no,yes,"This SBP provides exntension option for SBP_EMM_PROC_FAIL_HANDLING feature.<BR>- Option 1: Provide the functionality to bar strange cell in CMCC network that will always give Attach/TAU result as EPS only and cause #16. So that can avoid DUT disable E-UTRAN according to spec, and disturb user experience. This is only effective when SBP_EMM_PROC_FAIL_HANDLING is enabled.<BR>- Option 2: Provide the functionality to bar strange cell that keep giving Attach Reject with cause#12 without integrity protected.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:All disabled<BR>3: Enable extension:1, 2<BR>2: Enable extension:2<BR>1: Enable extension:1",,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8456,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[59].SBP_IGNORE_IR_REDIRECT_TO_LTE_WHEN_NO_CELL_THRESHOLD,modem_sbp_data_config[59].SBP_IGNORE_IR_REDIRECT_TO_LTE_WHEN_NO_CELL_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"If NW redirects from 2/3G to LTE but LTE find no suitable cells around, UE would record the failure count.<BR>Once the redirect failure count is >= threshold, then inter-RAT redirection to LTE would be ignored.<BR>When UE camp on LTE cell successfully, the count will be reset to 0.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Disabled<BR>0x01: Threshold:1 time<BR>0x02: Threshold:2 times<BR>0x14: Threshold:20 times<BR>0x04: Threshold:4 times<BR>....<BR>0x03: Threshold:3 times,,,N/A,,,,,,Pass,,,,
+8457,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[49].SBP_L2_REEST_CNT_THRESHOLD,modem_sbp_data_config[49].SBP_L2_REEST_CNT_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"UE will report EM when RRCConnectionReestablish caused by L2 events happened SBP_L2_REEST_CNT_THRESHOLD times within SBP_L2_REEST_TMR_THRESHOLD seconds. After the SBP_L2_REEST_TMR_THRESHOLD timer expires, the count used to report EM is reset to 0 and the next accumulation starts.",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0x02 ~ 0x06,,,Compile option "__CHR_AB_INFO__" is wrapped in the code,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Trigger REEST<BR> [Expected Result]<BR>UE repeort EM,Pass,,,,
+8458,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[48].SBP_L2_REEST_TMR_THRESHOLD,modem_sbp_data_config[48].SBP_L2_REEST_TMR_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"UE will report EM when RRCConnectionReestablish caused by L2 events happened SBP_L2_REEST_CNT_THRESHOLD times within SBP_L2_REEST_TMR_THRESHOLD seconds.<BR>After the EM is reported, UE will not report another EM unless the SBP_L2_REEST_TMR_THRESHOLD timer expires.<BR>When this timer timeout, the count used to report EM is reset to 0 and the next accumulation starts.",BIT,8,,8,0x3c,NR15.R3.MD700.IVT.MP1MR3.MP,,0x23:35 seconds<BR>0x28:40 seconds<BR>0x3C:60 seconds<BR>0x32:50 seconds<BR>0x37:55 seconds<BR>0x2D:45 seconds<BR>0x1E:30 seconds,,,Compile option "__CHR_AB_INFO__" is wrapped in the code,LTE Protocol (R11 Baseline),4G,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : 5<BR> [Init] <BR>Enter RRC connection<BR> [Test Step] <BR>Trigger REEST<BR> [Expected Result]<BR>UE repeort EM,Pass,,,,
+8459,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[45].SBP_LCSP_RSP_TIME_ADJ,modem_sbp_data_config[45].SBP_LCSP_RSP_TIME_ADJ,OTA and OTA BY OP,no,no,no,yes,"This SBP is to control the locaion service response time in order to compensate for network latency.<BR>When set as a non-zero value, the protocol stack will first reduce the response time value by the offset set here before begin of operation.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Do not adjust response time<BR>3:Reduce UE internal response time by 3s<BR>2:Reduce UE internal response time by 2s,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8460,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[46].SBP_LCSP_RSP_TIME_LB,modem_sbp_data_config[46].SBP_LCSP_RSP_TIME_LB,OTA and OTA BY OP,no,no,no,yes,"This SBP is to control the lower bound of locaion service response time.<BR>When the protocol stack needs to adjust the response time to compensate for network latency, the minimum value after adjustment will be the value set here.<BR>If original value given by network is already smaller than this value, no adjustement will be performed at all.<BR>Please be noted it is not suggested to set a value smaller than 14 unless you have a strong reason to do so or the GPS performance may be downgraded due to not enough response time.",BIT,8,,8,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,18:Response time adjustment lower bound is 18s<BR>19:Response time adjustment lower bound is 19s<BR>17:Response time adjustment lower bound is 17s<BR>14:Response time adjustment lower bound is 14s<BR>15:15:Response time adjustment lower bound is 15s<BR>16:Response time adjustment lower bound is 16s<BR>20:Response time adjustment lower bound is 20s,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8461,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[60].SBP_MCF_ETWS_CONTROL_SWITCH,modem_sbp_data_config[60].SBP_MCF_ETWS_CONTROL_SWITCH,OTA and OTA BY OP,no,no,no,yes,This acts as bit map which controls ETWS settings.,BIT,8,,8,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+8462,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[44].SBP_MODIFY_RLC_FOR_SACCH_DECODE,modem_sbp_data_config[44].SBP_MODIFY_RLC_FOR_SACCH_DECODE,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to modify the value of Radio Link Counter(RLC) which is received in System Information 6 from 2G NW. Instead of using NW given RLC value, we will use RLC value based on SBP value set.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:default RLC value from Nw<BR>0x01:RLC received from n/w + 4<BR>0x02:RLC received from n/w + 12<BR>0x03:RLC received from n/w + 16<BR>0x08:RLC received from n/w + 36<BR>0x05:RLC received from n/w + 24<BR>0x06:RLC received from n/w + 28<BR>0x07:RLC received from n/w + 32<BR>0x04:RLC received from n/w + 20,,,N/A,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+8463,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[51].SBP_NWSEL_LOCATION_BASED_ALTERNATIVE,modem_sbp_data_config[51].SBP_NWSEL_LOCATION_BASED_ALTERNATIVE,OTA and OTA BY OP,no,no,no,yes,"This SBP provides exntension option for SBP_EMM_PROC_FAIL_HANDLING feature.<BR>Option 1: Provide the functionality to bar strange cell in CMCC network that will always<BR>give Attach/TAU result as EPS only and cause #16. So that can avoid DUT disable E-UTRAN <BR>according to spec, and disturb user experience. This is only effective when <BR>SBP_EMM_PROC_FAIL_HANDLING is enabled.<BR>Option 2: Provide the functionality to bar strange cell that keep giving Attach Reject <BR>with cause#12 without integrity protected.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~2,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+8464,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[61].SBP_POS_MODE_CAPABILITY_SWITCH,modem_sbp_data_config[61].SBP_POS_MODE_CAPABILITY_SWITCH,OTA and OTA BY OP,no,no,no,yes,This SBP can switch the positioning mode in UE reporting positioning capability to NW.,BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE does not support AGPS<BR>3:Both UE-Based and UE-Assisted<BR>2:UE-Assisted<BR>1:UE-Based,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
8465,61211,NVRAM_EF_SIC_LIST_LID,1,check,entry[0~99].bcm.check,OTA,no,no,no,no,bcm,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:don't check<BR>3. check with SIM or NW plmn<BR>2:check with SIM plmn only<BR>1:check with NW plmn only,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (5 minutes) <BR> [Init] <BR> [Test Step] change check and result and plmn<BR> [Expected Result] enable/disable bcm in ESM message pdn_connectivity_requset's pco,Pass,,,,
8466,61211,NVRAM_EF_SIC_LIST_LID,1,result,entry[0~99].bcm.result,OTA,no,no,no,no,bcm,ENUM,1,,,0x0e,NR15.R3.MD700.IVT.MP1MR3.MP,,14:carry BCM<BR>13:check non,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (5 minutes) <BR> [Init] <BR> [Test Step] change check and result and plmn<BR> [Expected Result] enable/disable bcm in ESM message pdn_connectivity_requset's pco,Pass,,,,
8467,61211,NVRAM_EF_SIC_LIST_LID,1,check,entry[0~99].etft.check,OTA,no,no,no,no,etft,ENUM,1,,,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0:don't check<BR>3. check with SIM or NW plmn<BR>2:check with SIM plmn only<BR>1:check with NW plmn only,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR> Test Time (5 minutes) <BR> [Init] <BR> [Test Step] change check and result and plmn<BR> [Expected Result] enable/disable etft in ESM message pdn_connectivity_requset's pco,Pass,,,,
@@ -8430,77 +8430,77 @@
8509,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_rule_level_setting.support_query_simservs,xcap_info.support_rule_level_setting.support_query_simservs,Not Support,no,no,no,no,Support rule level setting<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
8510,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_send_dereg_after_put,xcap_info.support_send_dereg_after_put,OTA and OTA BY OP,no,no,no,no,Support send DEREG after set<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,XCAP_SUPPORT,XCAP IMS-SS,XCAP,,,This test only can do in RD IT from check if XCAP triggers IMS deregistation in lower layer aftet enable/disable CF.<BR><BR>Test in machine (Y/N) N<BR>Test Time (minutes) 5<BR> [Init] Insert a supported XCAP SIM card<BR> [Test Step]<BR> 1. Config to "1: Enabled"<BR> 2. Execute call forwarding<BR> [Expected Result]<BR> XCAP should trigger IMS deregistration after enable/disable CF,Pass,,,,
8511,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_send_dereg_after_put.support_send_dereg_after_put,xcap_info.support_send_dereg_after_put.support_send_dereg_after_put,Not Support,no,no,no,no,Support send DEREG after PUT<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
-8513,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,1,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR TX Power offset,SAR Mitigation,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8514,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,2,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR TX Power offset,SAR Mitigation,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8515,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,3,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR TX Power offset,SAR Mitigation,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8516,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,4,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR TX Power offset,SAR Mitigation,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8517,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,5,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR TX Power offset,SAR Mitigation,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8518,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,1,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8519,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,1,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8520,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,2,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8521,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,2,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8522,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,3,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8523,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,3,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8524,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,4,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8525,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,4,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8526,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,5,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
-8527,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,5,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,,,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8513,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,1,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8514,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,2,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8515,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,3,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8516,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,4,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8517,58158,NVRAM_EF_CL1_SAR_TX_POWER_OFFSET_LID,5,sar_power_offset,sar_tbl[0~19].sar_tbl_item.sar_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8518,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,1,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8519,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,1,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8520,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,2,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8521,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,2,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8522,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,3,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8523,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,3,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8524,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,4,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8525,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,4,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8526,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,5,swtp_chan_num,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_chan_num,OTA,no,no,no,no,channel num,UNSIGNED SHORT,2,,,swtp_tbl_item[0].swtp_chan_num: 1<BR>swtp_tbl_item[1].swtp_chan_num: 100<BR>swtp_tbl_item[2].swtp_chan_num: 200<BR>swtp_tbl_item[3].swtp_chan_num: 300<BR>swtp_tbl_item[4].swtp_chan_num: 400<BR>swtp_tbl_item[5].swtp_chan_num: 500<BR>swtp_tbl_item[6].swtp_chan_num: 600<BR>swtp_tbl_item[7].swtp_chan_num: 700<BR>swtp_tbl_item[8].swtp_chan_num: 799<BR>swtp_tbl_item[9].swtp_chan_num: 991<BR>swtp_tbl_item[10].swtp_chan_num: 1023<BR>swtp_tbl_item[11].swtp_chan_num: 65535<BR>swtp_tbl_item[12].swtp_chan_num: 65535<BR>swtp_tbl_item[13].swtp_chan_num: 65535<BR>swtp_tbl_item[14].swtp_chan_num: 65535<BR>swtp_tbl_item[15].swtp_chan_num: 65535,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
+8527,58149,NVRAM_EF_CL1_TX_POWER_OFFSET_LID,5,swtp_power_offset,swtp_tbl[0~0].swtp_tbl_item[0~15].swtp_power_offset,OTA,no,no,no,no,"TX power offset, in unit of 1/32",SHORT,48,"12,2",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<=0,,,,SAR Mitigation,RF_Proprietary,,,Test in machine: N<BR>Test Time: 5<BR>[Init]: Create OTA file<BR>[Test Step]: Set OTA file<BR>[Expected Result]: Check if OTA is successful,Untested,,,,
8528,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,en_force_dpd_default_lut,normal_otfc.en_force_dpd_default_lut,OTA,no,no,yes,no,normal otfc,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
8529,60570,NVRAM_EF_EL1_ET_DEBUG_PARA_LID,1,reserved,normal_otfc.reserved,OTA,no,no,yes,no,normal otfc,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
8530,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",enable_inact_timer_exp_trig_rel_a2,enable_inact_timer_exp_trig_rel_a2,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized enablence of sending the trigger_release A2 measurement report when dataInactive timer T3 timeout for smart idle feature,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0: Not supported<BR>0x1: Supported,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): Less than 5 minutes<BR>[Init] LTE load + internal phone + Test SIM<BR>[Test Step] Power on, 4G registration is completed.<BR>[Expected Result] Check this field in UE-EUTRA-Capability is matched as your MCF setting.",Pass,,,,
8531,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",inactive_timer_length,inactive_timer_length,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized timer length of dataInactive timer T3 for smart idle feature,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0: Not supported<BR>0x1: Supported,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): Less than 5 minutes<BR>[Init] LTE load + internal phone + Test SIM<BR>[Test Step] Power on, 4G registration is completed.<BR>[Expected Result] Check this field in UE-EUTRA-Capability is matched as your MCF setting.",Pass,,,,
8532,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",inactive_timer_length_DRX,inactive_timer_length_DRX,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]CCustomized timer length of dataInactive timer T3 while DRX configured for smart idle feature,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0: Not supported<BR>0x1: Supported,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): Less than 5 minutes<BR>[Init] LTE load + internal phone + Test SIM<BR>[Test Step] Power on, 4G registration is completed.<BR>[Expected Result] Check this field in UE-EUTRA-Capability is matched as your MCF setting.<BR>",Pass,,,,
8536,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_nr_incall_ho_enable,ipol_ans_cfg.ipol_ims_nr_incall_ho_enable,OTA and OTA BY OP,no,no,no,no,"[MCF]When disable, UE won't perform handover between NR and WLAN during on-going IMS call<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,Test in machine (Y/N)<BR>Test Time (0.5)<BR>[Init]<BR>NR attached and WiFi calling ongoing<BR>[Test Step]<BR>WiFi RSSI decreases<BR>[Expected Result]<BR>VoWiFi icon on,Pass,,,,
-8537,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8538,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8539,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8540,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8541,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8542,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8543,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8544,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8545,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8546,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8547,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8548,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8549,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8550,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8551,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8552,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8553,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8554,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8555,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8556,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8557,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8558,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8559,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8560,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8561,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8562,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8563,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8564,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8565,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8566,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8567,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8568,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8569,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8570,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8571,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8572,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8573,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8574,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8575,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8576,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-8577,59715,NVRAM_EF_L1_SAR_TX_BACKOFF_DB_CUSTOM_PARAMES_LID,1,power_decrement,SAR_RF_STATE[0~19].power_decrement,OTA,no,no,yes,no,[MCF]settings for adjusting tx power offset accurately for multi slot and SAR enabled,INT,1536,"4,12,2,4",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR TX Power offset,SAR Mitigation,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8537,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8538,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8539,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8540,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8541,59684,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8542,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8543,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8544,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8545,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8546,59682,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8547,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8548,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8549,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8550,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8551,59683,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8552,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8553,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8554,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8555,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,UNSIGNED SHORT,2,,,4096,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 8191,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8556,59685,NVRAM_EF_L1_EPSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for EPSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8557,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:560<BR>table[0].arfcn_weight[2].max_arfcn:800<BR>table[0].arfcn_weight[3].max_arfcn:885<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0200 - 0x0375:DCS1800 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8558,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8559,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8560,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8561,59680,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_DCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK DCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8562,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:160<BR>table[0].arfcn_weight[1].max_arfcn:190<BR>table[0].arfcn_weight[2].max_arfcn:220<BR>table[0].arfcn_weight[3].max_arfcn:251<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0080 - 0x00fb:GSM850 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8563,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8564,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8565,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8566,59678,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM850_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM850,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8567,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:40<BR>table[0].arfcn_weight[1].max_arfcn:82<BR>table[0].arfcn_weight[2].max_arfcn:124<BR>table[0].arfcn_weight[3].max_arfcn:1023<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x03cf~0x03ff:GSM900 namd ARFCNs<BR>0x0000~0x007c:GSM900 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8568,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:21<BR>table[0].arfcn_weight[1].mid_level:21<BR>table[0].arfcn_weight[2].mid_level:21<BR>table[0].arfcn_weight[3].mid_level:21<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,21,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8569,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8570,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8571,59679,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_GSM900_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK GSM900,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8572,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,max_arfcn,table[0~0].arfcn_weight[0~11].max_arfcn,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,2,,,table[0].arfcn_weight[0].max_arfcn:520<BR>table[0].arfcn_weight[1].max_arfcn:620<BR>table[0].arfcn_weight[2].max_arfcn:720<BR>table[0].arfcn_weight[3].max_arfcn:810<BR>table[0].arfcn_weight[4].max_arfcn:65535<BR>table[0].arfcn_weight[5].max_arfcn:0<BR>table[0].arfcn_weight[6].max_arfcn:0<BR>table[0].arfcn_weight[7].max_arfcn:0<BR>table[0].arfcn_weight[8].max_arfcn:0<BR>table[0].arfcn_weight[9].max_arfcn:0<BR>table[0].arfcn_weight[10].max_arfcn:0<BR>table[0].arfcn_weight[11].max_arfcn:0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0600 - 0x072a:PCS1900 band ARFCNs,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8573,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,mid_level,table[0~0].arfcn_weight[0~11].mid_level,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,table[0].arfcn_weight[0].mid_level:16<BR>table[0].arfcn_weight[1].mid_level:16<BR>table[0].arfcn_weight[2].mid_level:16<BR>table[0].arfcn_weight[3].mid_level:16<BR>table[0].arfcn_weight[4].mid_level:65535<BR>table[0].arfcn_weight[5].mid_level:0<BR>table[0].arfcn_weight[6].mid_level:0<BR>table[0].arfcn_weight[7].mid_level:0<BR>table[0].arfcn_weight[8].mid_level:0<BR>table[0].arfcn_weight[9].mid_level:0<BR>table[0].arfcn_weight[10].mid_level:0<BR>table[0].arfcn_weight[11].mid_level:0,NR15.R3.MD700.IVT.MP1MR3.MP,,16,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8574,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,hi_weight,table[0~0].arfcn_weight[0~11].wt[0~11].hi_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8575,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,low_weight,table[0~0].arfcn_weight[0~11].wt[0~11].low_weight,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,UNSIGNED SHORT,2,,,16384,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to 65535,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8576,59681,NVRAM_EF_L1_GMSK_TX_POWER_OFFSET_PCS_LID,1,power_offset,table[0~0].power_offset,OTA,no,no,yes,no,[MCF]settings of TX POWER offset for GMSK PCS,SHORT,384,"12,16",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-128 to 127,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+8577,59715,NVRAM_EF_L1_SAR_TX_BACKOFF_DB_CUSTOM_PARAMES_LID,1,power_decrement,SAR_RF_STATE[0~19].power_decrement,OTA,no,no,yes,no,[MCF]settings for adjusting tx power offset accurately for multi slot and SAR enabled,INT,1536,"4,12,2,4",,0,NR15.R3.MD700.IVT.MP1MR3.MP,,>=0,,,,SAR Mitigation,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
8578,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,en_force_dpd_default_lut,normal_otfc.en_force_dpd_default_lut,OTA,no,no,yes,no,normal otfc,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
8579,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,reserved,normal_otfc.reserved,OTA,no,no,yes,no,normal otfc,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-8580,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_EMM_RETRY_PS_PAGING_WHEN_GEMINI_FAIL,modem_sbp_config[106].SBP_EMM_RETRY_PS_PAGING_WHEN_GEMINI_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE will not retry PS paging when PS paging failed due to GEMINI_FAIL<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enabled. UE will retry PS paging within 3 times when PS paging failed due to GEMINI_FAIL<BR>0:Disabled, UE will not retry PS paging when PS paging failed due to GEMINI_FAIL",,,__EMM_RETRY_PS_PAGING_WHEN_GEMINI_FAIL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8581,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_MODEM_ELEVATOR_MODE,modem_sbp_config[106].SBP_MODEM_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Elevator mode trigger<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,Elevator Mode feature,MTK Proprietary,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
-8582,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_SHORT_T3417EXT_BY_PLMN,modem_sbp_config[106].SBP_SHORT_T3417EXT_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set short T3417EXT for specific plmn<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Set short T3417EXT for specific plmn.<BR>0:Disable. Don't Set short T3417EXT for specific plmn.,,,__SHORT_T3417EXT_BY_PLMN__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8583,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_SMART_IDLE_HO_CONTINUE,modem_sbp_config[106].SBP_SMART_IDLE_HO_CONTINUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Smart idle timer continues after handover<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Smart idle timer NOT keep running during and after HO<BR>1:Smart idle timer keep running during and after HO,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-8584,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[63].SBP_SMART_IDLE_MAXIMUM_T_RAND,modem_sbp_data_config[63].SBP_SMART_IDLE_MAXIMUM_T_RAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Maximum value of T_rand of Smart Idle feature<BR>bit 0:0:0 second<BR>bit 1:1:1 second<BR>bit 2:2:2 seconds<BR>bit 3:3:3 seconds<BR>bit 4:4:4 seconds<BR>bit 5:5:5 seconds<BR>bit 6:6:6 seconds<BR>bit 7:7:7 seconds<BR>bit 8:8:8 seconds<BR>bit 9:9:9 seconds<BR>bit 16:16:10 seconds<BR>bit 17:17:11 seconds<BR>bit 18:18:12 seconds<BR>bit 19:19:13 seconds<BR>bit 20:20:14 seconds<BR>bit 21:21:15 seconds<BR>bit 22:22:16 seconds<BR>bit 23:23:17 seconds<BR>bit 24:24:18 seconds<BR>bit 25:25:19 seconds<BR>bit 32:32:20 seconds<BR>bit 33:33:21 seconds<BR>bit 34:34:22 seconds<BR>bit 35:35:23 seconds<BR>bit 36:36:24 seconds<BR>bit 37:37:25 seconds<BR>bit 38:38:26 seconds<BR>bit 39:39:27 seconds<BR>bit 40:40:28 seconds<BR>bit 41:41:29 seconds<BR>bit 48:48:30 seconds",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30:This is upper bound of T_rand value of Smart Idle feature (in second),,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-8585,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[62].SBP_SMART_IDLE_MONITOR_LEVEL,modem_sbp_data_config[62].SBP_SMART_IDLE_MONITOR_LEVEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Monitor level of Smart Idle feature<BR>bit 0:0:Feature off<BR>bit 1:1:Monitor DRB only<BR>bit 2:2:Monitor SRB and DRB",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Monitor DRB only<BR>2:Monitor SRB and DRB<BR>0:Feature Off,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-8586,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[64].SBP_SMART_IDLE_T_WAIT,modem_sbp_data_config[64].SBP_SMART_IDLE_T_WAIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Value of T_wait of Smart Idle feature<BR>bit 0:0:0 second<BR>bit 1:1:1 second<BR>bit 2:2:2 seconds<BR>bit 3:3:3 seconds<BR>bit 4:4:4 seconds<BR>bit 5:5:5 seconds<BR>bit 6:6:6 seconds<BR>bit 7:7:7 seconds<BR>bit 8:8:8 seconds<BR>bit 9:9:9 seconds<BR>bit 16:16:10 seconds<BR>bit 17:17:11 seconds<BR>bit 18:18:12 seconds<BR>bit 19:19:13 seconds<BR>bit 20:20:14 seconds<BR>bit 21:21:15 seconds<BR>bit 22:22:16 seconds<BR>bit 23:23:17 seconds<BR>bit 24:24:18 seconds<BR>bit 25:25:19 seconds<BR>bit 32:32:20 seconds<BR>bit 33:33:21 seconds<BR>bit 34:34:22 seconds<BR>bit 35:35:23 seconds<BR>bit 36:36:24 seconds<BR>bit 37:37:25 seconds<BR>bit 38:38:26 seconds<BR>bit 39:39:27 seconds<BR>bit 40:40:28 seconds<BR>bit 41:41:29 seconds<BR>bit 48:48:30 seconds",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30:T_wait value of Smart Idle feature (in second),,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8580,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_EMM_RETRY_PS_PAGING_WHEN_GEMINI_FAIL,modem_sbp_config[106].SBP_EMM_RETRY_PS_PAGING_WHEN_GEMINI_FAIL,OTA and OTA BY OP,no,no,no,yes,"If this SBP is on, then UE will retry PS paging within 3 times when PS paging failed due to GEMINI_FAIL. Because the PS paging<BR>may be the MT VoLTE call.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enabled. UE will retry PS paging within 3 times when PS paging failed due to GEMINI_FAIL<BR>0:Disabled, UE will not retry PS paging when PS paging failed due to GEMINI_FAIL",,,User could use compile option __EMM_RETRY_PS_PAGING_WHEN_GEMINI_FAIL__ to switch the setting of this SBP,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8581,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_MODEM_ELEVATOR_MODE,modem_sbp_config[106].SBP_MODEM_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,This feature is used for elevator mode trigger to reselect from 3G to 4G.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature is controlled by __SBP_MODEM_ELEVATOR_MODE__.,Elevator Mode feature,MTK Proprietary,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8582,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_SHORT_T3417EXT_BY_PLMN,modem_sbp_config[106].SBP_SHORT_T3417EXT_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"For some NWs, NW does not release RRC connection with redirect info before T3417EXT expires. As a result, UE wait for T3417EXT expire to select 2G/3G. <BR>NW may release the call since it did not receive paging response for a long time, which leads to CS call fails.<BR>To improve CS performance in such abnormal networks, shorten T3417EXT to 4 secs to make UE search 2G/3G more quickly.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled. Set short T3417EXT for specific plmn.<BR>0:Disable. Don't Set short T3417EXT for specific plmn.,,,User could use compile option __SHORT_T3417EXT_BY_PLMN__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8583,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_SMART_IDLE_HO_CONTINUE,modem_sbp_config[106].SBP_SMART_IDLE_HO_CONTINUE,OTA and OTA BY OP,no,no,no,yes,Determine whether to restart data inactivity timer of smart idle feature after handover. Smart idle is a feature that uses a data inactivity timer to detect the scenario in which there is no data activity for a certain time during the ongoing RRC connection. UE makes RRC connection released for power saving if the scenario is detected.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Smart idle timer NOT keep running during and after HO<BR>1:Smart idle timer keep running during and after HO,,,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8584,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[63].SBP_SMART_IDLE_MAXIMUM_T_RAND,modem_sbp_data_config[63].SBP_SMART_IDLE_MAXIMUM_T_RAND,OTA and OTA BY OP,no,no,no,yes,"This is the maximum value of T_rand, which is randomly generated as a part of the length of data inactivity timer of Smart Idle feature. Smart idle is a feature that uses a data inactivity timer to detect the scenario in which there is no data activity for a certain time during the ongoing RRC connection. UE makes RRC connection released for power saving if the scenario is detected.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30:This is upper bound of T_rand value of Smart Idle feature (in second),,,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8585,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[62].SBP_SMART_IDLE_MONITOR_LEVEL,modem_sbp_data_config[62].SBP_SMART_IDLE_MONITOR_LEVEL,OTA and OTA BY OP,no,no,no,yes,Determine how to monitor data activity for smart idle feature. Smart idle is a feature that uses a data inactivity timer to detect the scenario in which there is no data activity for a certain time during the ongoing RRC connection. UE makes RRC connection released for power saving if the scenario is detected.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Monitor DRB only<BR>2:Monitor SRB and DRB<BR>0:Feature Off,,,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8586,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[64].SBP_SMART_IDLE_T_WAIT,modem_sbp_data_config[64].SBP_SMART_IDLE_T_WAIT,OTA and OTA BY OP,no,no,no,yes,This is the value of T_wait as a part of the length of data inactivity timer of Smart Idle feature. Smart idle is a feature that uses a data inactivity timer to detect the scenario in which there is no data activity for a certain time during the ongoing RRC connection. UE makes RRC connection released for power saving if the scenario is detected.,BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30:T_wait value of Smart Idle feature (in second),,,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
8587,58870,NVRAM_EF_UL1_SARBACKOFF_ROUTE1_LID,1,max_uarfcn,table[0~N].subband_power_offset.max_uarfcn,OTA,no,no,yes,no,"[MCF,DOC]:CS0070-AAF2O-AND-V1.0EN_Modem_Design_RFSW_RF_NVRAM_LID_Introduction_Application_Note.docx",UNSIGNED SHORT,N,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
8588,58870,NVRAM_EF_UL1_SARBACKOFF_ROUTE1_LID,1,pwr_offset_dB,table[0~N].subband_power_offset.pwr_offset_dB,OTA,no,no,yes,no,"[MCF,DOC]:CS0070-AAF2O-AND-V1.0EN_Modem_Design_RFSW_RF_NVRAM_LID_Introduction_Application_Note.docx",SHORT,N,N,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,-64~56:1/8 dB,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
8589,58871,NVRAM_EF_UL1_SARBACKOFF_ROUTE2_LID,1,max_uarfcn,table[0~N].subband_power_offset.max_uarfcn,OTA,no,no,yes,no,"[MCF,DOC]:CS0070-AAF2O-AND-V1.0EN_Modem_Design_RFSW_RF_NVRAM_LID_Introduction_Application_Note.docx",UNSIGNED SHORT,N,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
@@ -8538,7 +8538,7 @@
8630,57372,NVRAM_EF_NL1_ET_CMEAS_PARA_LID,1,cmeas_max_min,cmeas_info[0~99].et_cmeas_lut_shift_by_temperature[0~2].cmeas_max_min,OTA,no,no,yes,no,cmeas info,SHORT,4,2,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
8631,57372,NVRAM_EF_NL1_ET_CMEAS_PARA_LID,1,nr_route,cmeas_info[0~99].nr_route,OTA,no,no,yes,no,cmeas info,ENUM,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
8632,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_DUAL_NSA_SUPPORT,modem_sbp_config[107].SBP_DUAL_NSA_SUPPORT,OTA,no,no,no,no,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NSA+NSA DSDS Support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,NSA+NSA DSDS,Multiple SIM,,,"1. Enable SBP and reboot.<BR>2. In NSA env, check if both SIM can connect to NSA",Pass,,,,
-8633,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_NR_REPORT_FALLBACK_CA,modem_sbp_config[107].SBP_NR_REPORT_FALLBACK_CA,OTA and OTA BY OP,no,no,no,yes,Configures whether UE will report fallback band combinations in UE-MRDC-Capability and UE-NR-Capability or not.,BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,Option 3,5G Architecture,,,"Use new MCF tool to generate new OTA files<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
+8633,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_NR_REPORT_FALLBACK_CA,modem_sbp_config[107].SBP_NR_REPORT_FALLBACK_CA,OTA and OTA BY OP,no,no,no,yes,This SBP is used to control reporting of fallback band combinations in NR capability.<BR>Note! 3GPP specifications do not allow reporting of fallback band combinations.,BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,N/A,Option 3,5G Architecture,,,"Use new MCF tool to generate new OTA files<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated.",Pass,,,,
8636,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conf_call_final_notify_timer_timeout,ua_config.conf_call_final_notify_timer_timeout,OTA and OTA BY OP,no,no,no,no,The configurable timeout value is used to wait for final NOTIFY from the N/W during conference creation and add/remove participants scenario.<BR>0:Don't start the timer<BR>x:Means start the timer with x timeout seconds<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,5:The non zero timeout value means that DUT will start the timer after sending REFER to the N/W and wait till final NOTIFY arrived from the N/W.,,,NA,IMS,IMS,,,"Test in machine (Y/N)N<BR>Test Time (minutes)<BR>[Init]<BR> Insert JIO Sim in Slot1 and Enable Mobile data.<BR>[Test Step]<BR>1. Make a Volte call from DUT to Party B and accept the call on Party B.<BR>2. Now make a Volte call from DUT to party C and accept the call on party C.<BR>3. Now merge the calls on DUT,once conference is successful<BR>4. Now make another call from Party D to DUT accept the call<BR>5. Now disconnect call from Party D and merge call from DUT at same time and<BR>6.Observed DUT fails to remove disconnected call and showing call is running untill disconnect in DUT<BR>7.If the call is disconnected in DUT still showing Hanging up and fails to remove Party D and Unable switch to confernce call.<BR>[Expected Result]<BR>DUT should remove disconnected call and able to switch to conference call.",Untested,,,,
8637,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conf_call_final_notify_timer_timeout.conf_call_final_notify_timer_timeout,ua_config.conf_call_final_notify_timer_timeout.conf_call_final_notify_timer_timeout,Not Support,no,no,no,no,[MCF]<BR>The configurable timeout value is used to wait for final notify from the N/W during conference creation and add/remove participant scenario.<BR>bit 0:0:Dont't start the timer<BR>bit 1:1:Means start the timer with x timeout second,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
8638,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",no_additional_invite_after_downgrade,ua_config.no_additional_invite_after_downgrade,OTA and OTA BY OP,no,no,no,no,This parameter is used to control if reinvite need to send after downgrade successful.<BR>0:false<BR>1:true<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:false<BR>1:true,,,,IMS,IMS,,,"[Precondition]<BR>1.Card1 is CMHK registered in VOLTE, Card2 is SmarTone registered in VOLTE<BR>2.DUT's data on SIM2<BR>//iPhone8Plus:SmarTone VOLTE <BR>Operating steps]<BR>1. DUT Video Phone Calls the iPhone 8Plus(MO Video call to a right number but Video call function disabled)<BR>2. Establish a call<BR>3. Is Check's call normal",Untested,,,,
@@ -8557,9 +8557,9 @@
8651,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_video_as_voice_on_failure.b1,ua_config.retry_video_as_voice_on_failure.b1,Not Support,no,no,no,no,[MCF]Bit mask When Video call is failed with error then retry for Voice<BR> retry for error 500,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
8652,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",subscribe_guard_timer,ua_config.subscribe_guard_timer,OTA and OTA BY OP,no,no,no,no,ensure release subscribe rf after guard timer timeout<BR>0:disable subscribe guard timer<BR>2:enable sunscribe guard timer<BR>Unit:sec<BR>,UNSIGNED CHAR,1,,,2,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable subscribe guard timer<BR>2:enable sunscribe guard timer,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8653,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",subscribe_guard_timer.subscribe_guard_timer,ua_config.subscribe_guard_timer.subscribe_guard_timer,Not Support,no,no,no,no,[MCF]<BR>ensure release subscribe rf after guard timer timeout<BR>bit 0:0:disable subscribe guard timer<BR>bit 2:2:enable sunscribe guard timer,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8654,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_EMM_CONTROL_MS_NW_CAPA_IE,modem_sbp_config[107].SBP_EMM_CONTROL_MS_NW_CAPA_IE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM would control the length of MS NW capability in attach/TAU request<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Disable endc capability <BR>[Test Step]<BR>Flight mode on/off and check the first attach request.<BR>[Expected Result]<BR>The length of MS NS capability in Attach request is 4.,Pass,,,,
-8655,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_EMM_UE_MS_NW_CAPA_MAX_LEN_EQUAL_TO_THREE,modem_sbp_config[107].SBP_EMM_UE_MS_NW_CAPA_MAX_LEN_EQUAL_TO_THREE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>The length of MS NW capability is 3 in attach/TAU request<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable this SBP and disable endc capability.<BR>[Test Step]<BR>Flight mode on/off, check the length of MS NS capability in Attach request is 3 or not. <BR>[Expected Result]<BR>the length of MS NS capability in Attach request is 3",Pass,,,,
-8656,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_VC_TO_IDLE_SELECT_SERV_CELL,modem_sbp_config[107].SBP_VC_TO_IDLE_SELECT_SERV_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Select Serving Cell when VC to idle<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,Gemini 3.0,Multiple SIM,,,Test in machine (Y/N): N<BR>Test Time (minutes): 1hr<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8654,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_EMM_CONTROL_MS_NW_CAPA_IE,modem_sbp_config[107].SBP_EMM_CONTROL_MS_NW_CAPA_IE,OTA and OTA BY OP,no,no,no,yes,"if this SBP on, EMM would control the length of MS NW capability in attach/TAU request",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Disable endc capability <BR>[Test Step]<BR>Flight mode on/off and check the first attach request.<BR>[Expected Result]<BR>The length of MS NS capability in Attach request is 4.,Pass,,,,
+8655,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_EMM_UE_MS_NW_CAPA_MAX_LEN_EQUAL_TO_THREE,modem_sbp_config[107].SBP_EMM_UE_MS_NW_CAPA_MAX_LEN_EQUAL_TO_THREE,OTA and OTA BY OP,no,no,no,yes,The length of MS NW capability is 3 in attach/TAU request,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable this SBP and disable endc capability.<BR>[Test Step]<BR>Flight mode on/off, check the length of MS NS capability in Attach request is 3 or not. <BR>[Expected Result]<BR>the length of MS NS capability in Attach request is 3",Pass,,,,
+8656,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_VC_TO_IDLE_SELECT_SERV_CELL,modem_sbp_config[107].SBP_VC_TO_IDLE_SELECT_SERV_CELL,OTA and OTA BY OP,no,no,no,yes,Enable this feature to select current serving cell when scenario is Virtual Connected to idle.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,Gemini 3.0,Multiple SIM,,,Test in machine (Y/N): N<BR>Test Time (minutes): 1hr<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8657,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_rule_level_setting.support_rule_level_setting,xcap_info.support_rule_level_setting.support_rule_level_setting,Not Support,no,no,no,no,Support rule level setting<BR>0:Disabled<BR>1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
8658,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_c2k_setup_barring,ipol_ans_cfg.ipol_c2k_setup_barring,OTA and OTA BY OP,no,no,no,no,"[MCF]When enable, barring IMS setup on C2K<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable barring IMS setup on C2K<BR>1:enable barring IMS setup on C2K,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"Test in machine (Y/N)N<BR>Test Time (minutes) 5minutes<BR>[Init] in 4G NW, VOLTE Register, <BR>[Test Step] 4->3G, make mo call<BR>[Expected Result] change to C2K mo call, not immediately end",Pass,,,,
8659,59686,NVRAM_EF_L1_2G_RF_PARAMETER_LID,1,Fast_Timing_Control,Fast_Timing_Control,OTA,no,no,yes,no,"[MCF,DOC]",ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,KAL_FALSE:Fast timing error compensation will be disabled.<BR>KAL_TRUE:Fast timing error compensation will be enabled.,,,,MD Config,Modem - Customer Requirement,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
@@ -8567,9 +8567,9 @@
8662,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_prcd_in_video_action_sdp.add_prcd_in_video_action_sdp,ua_config.add_prcd_in_video_action_sdp.add_prcd_in_video_action_sdp,Not Support,no,no,no,no,[MCF]<BR>Add qos attributes in SDP if precondition is needed when we have video actions<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
8663,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",curr_loc_dir_none_for_wifi,ua_config.curr_loc_dir_none_for_wifi,OTA and OTA BY OP,no,no,no,no,"When dialing VoWiFi call, set direction tag of curr local qos to none if flag enabled, otherwise set the tag to sendrecv<BR>0:Set direction tag of curr local qos to sendrecv<BR>1:Set direction tag of curr local qos to none<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Set direction tag of curr local qos to sendrecv<BR>1:Set direction tag of curr local qos to none,,,,IMS,IMS,,,"Test in machine (Y/N) N<BR>Test Time (minutes): 10<BR>[Init]<BR>1) MO/MT registered IMS via WiFI<BR>[Test Step]<BR>1) MO make vowifi call to MT<BR>2) MT accept<BR>[Expected Result]<BR>1) Call Success<BR>2) Check the initial INVITE of MO, direction tag of curr local qos shall be "sendrecv" if NV setting is enabled, otherwsie the direction tag shall be "none"",Pass,,,,
8664,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",curr_loc_dir_none_for_wifi.curr_loc_dir_none_for_wifi,ua_config.curr_loc_dir_none_for_wifi.curr_loc_dir_none_for_wifi,Not Support,no,no,no,no,"[MCF]<BR>When dialing VoWiFi call, set direction tag of curr local qos to none if flag enabled, otherwise set the tag to sendrecv<BR>bit 0:0:Set direction tag of curr local qos to sendrecv<BR>bit 1:1:Set direction tag of curr local qos to none",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
-8665,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_2G_AS_NAS_DATA_CNF_RECOV,modem_sbp_config[107].SBP_2G_AS_NAS_DATA_CNF_RECOV,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To Enable 2G AS_NAS_DATA_CNF Recovery functionality<BR>bit 0:Not Enabled<BR>bit 1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:2G AS_NAS_DATA_CNF Recovery functionality Enabled<BR>bit 0:2G AS_NAS_DATA_CNF Recovery functionality Not Enabled,,,This SBP can be disabled by adding "__DISABLE_2G_AS_NAS_DATA_CNF_RECOV__" compilation option,MD Config,Modem - Customer Requirement,,,"Format: <BR> Test in machine : No<BR> Test Time (minutes) : 15minutes<BR> [Init] : 2G only mode, Good signal area<BR> [Test Step] : Flight mode On/Off, Data ON/Off, Web browsing<BR> [Expected Result]: Above tests should not take more than 1 minute.",Pass,,,,
-8666,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_DATA_IMS_OFF,modem_sbp_config[107].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_DATA_IMS_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable EUTRAN capability and trigger EPS detach if needed when data and ims are turned off.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
-8667,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_HVOLTE_RTT_POWER_UP_REGISTER_LATER,modem_sbp_config[107].SBP_HVOLTE_RTT_POWER_UP_REGISTER_LATER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delay 1xRTT power up register 20s from VoLTE to SRLTE mode with hVoLTE device<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,1xRTT,3G,,,test case: VZW hVoLTE 2.1.6,Pass,,,,
+8665,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_2G_AS_NAS_DATA_CNF_RECOV,modem_sbp_config[107].SBP_2G_AS_NAS_DATA_CNF_RECOV,OTA and OTA BY OP,no,no,no,yes,"If Signal conditions are marginal, MS receives PUAN, but selected BSNs may get NACK. <BR>This can result in longer delays at RLC level. (There is no such time limitation in 44.060 to wait for perticular BSN.)<BR>Upper layers Retransmit/calls alternate handling after receiving AS_NAS_DATA_CONF from RLC.<BR>So, Entire Procedures may get delays due to signal conditions.<BR>RLC will start a AS_NAS_DATA_CNF RECOVERY Timer on receiving upper layer PDU, based on this SBP<BR>After expiry of this timer TX failure is reported to upper layers.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:2G AS_NAS_DATA_CNF Recovery functionality Enabled<BR>bit 0:2G AS_NAS_DATA_CNF Recovery functionality Not Enabled,,,This SBP is default ON and can be disabled by SBP feature flag __DISABLE_2G_AS_NAS_DATA_CNF_RECOV__ .,MD Config,Modem - Customer Requirement,,,"Format: <BR> Test in machine : No<BR> Test Time (minutes) : 15minutes<BR> [Init] : 2G only mode, Good signal area<BR> [Test Step] : Flight mode On/Off, Data ON/Off, Web browsing<BR> [Expected Result]: Above tests should not take more than 1 minute.",Pass,,,,
+8666,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_DATA_IMS_OFF,modem_sbp_config[107].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_DATA_IMS_OFF,OTA and OTA BY OP,no,no,no,yes,"Disable EUTRAN capability and trigger EPS detach if needed when data and ims are turned off. <BR>If the PDP Contexts or PDN Connections remain activated while data is set to off, the downlink data communication may occur. It may cause that unintended fee of data communication is charged to the user. Therefore, UE will trigger EPS detach if needed, disable EUTRAN capability, and search 2/3G RATs. UE can still PS attach on 2/3G RATs with EUTRAN capability disabled.<BR>When data or ims is turned on, UE will enable EUTRAN capability and may trigger attach/RAU on 2/3G to inform network that the EUTRAN capability is enabled. UE will go back to LTE via AS inter-RAT procedure (e.g., reselection, redirection, handover, etc.)<BR>"Data off" means not only that the mobile data switch on UI is turned off but also that data roaming switch is turned off and UE camps on a roaming PLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,This SBP can be controlled by compile option __EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_DATA_IMS_OFF__,MD Config,Modem - Customer Requirement,,,No need since not support MCF,Untested,,,,
+8667,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[107].SBP_HVOLTE_RTT_POWER_UP_REGISTER_LATER,modem_sbp_config[107].SBP_HVOLTE_RTT_POWER_UP_REGISTER_LATER,OTA and OTA BY OP,no,no,no,yes,"If SBP on, delay 1xRTT power up register 20s from VoLTE to SRLTE mode with hVoLTE device.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,.,1xRTT,3G,,,test case: VZW hVoLTE 2.1.6,Pass,,,,
8668,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",delay_leave_ap_mode_for_wfc_380_timer_length,profile_normal.delay_leave_ap_mode_for_wfc_380_timer_length,OTA BY OP,no,no,no,yes,VDM_ADS_TIMER_DELAY_LEAVE_AP_MODE_FOR_WFC_380 length,UNSIGNED CHAR,1,,,0x20,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255:VDM_ADS_TIMER_DELAY_LEAVE_AP_MODE_FOR_WFC_380 length (seconds),,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Pass,,,,
8669,60574,NVRAM_EF_EL1_DPD_DEBUG_PARA_LID,1,cal_item,factory.algo_err_dump_iq.cal_item,OTA,no,no,yes,no,cal item,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0<BR>0:0,,,,MD Config,Modem - Customer Requirement,,,OTA,Pass,,,,
8670,60574,NVRAM_EF_EL1_DPD_DEBUG_PARA_LID,1,dump_type,factory.algo_err_dump_iq.dump_type,OTA,no,no,yes,no,dump type,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0<BR>0:0,,,,MD Config,Modem - Customer Requirement,,,OTA,Pass,,,,
@@ -8616,71 +8616,71 @@
8715,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",fake_a2_report_sending_allowed,smart_idle.fake_a2_report_sending_allowed,OTA and OTA BY OP,no,no,no,no,Indicated whether UE is allowed to send fake A2 report.,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:int: 0~1<BR>0: disabled<BR>1:enabled,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8716,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",inactivity_timer_length,smart_idle.inactivity_timer_length,OTA and OTA BY OP,no,no,no,no,"Data inactivity timer length, when long DRX is not configured.",UNSIGNED SHORT,2,,,"0x3c, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,60:int: 10~600,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8717,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",inactivity_timer_length_drx,smart_idle.inactivity_timer_length_drx,OTA and OTA BY OP,no,no,no,no,"Data inactivity timer length, when long DRX is configured.",UNSIGNED SHORT,2,,,300,NR15.R3.MD700.IVT.MP1MR3.MP,,120:int: 10~600,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8718,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].REMOVE_CLIR_PLUS_PREFIX,modem_sbp_config[109].REMOVE_CLIR_PLUS_PREFIX,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable remove the CLIR and plus prefix of call number in +ECPI URC, if these prefix exist.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR> Initial Condition:<BR>1. VoLTE enable;<BR>2. carrier support DDD;<BR>3. ims parameter enable_ddd_feature =1<BR>4. enable the para REMOVE_CLIR_PLUS_PREFIX in make file<BR>Detailed Steps:<BR>Make a call to a long distance number.( like '#31#' + call number)<BR>[Expected Result]<BR>display call number info without '+' and '#31#' in phone UI.,Untested,,,,
-8719,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_1XRTT_SYNC_MEID_FROM_IMEI,modem_sbp_config[109].SBP_1XRTT_SYNC_MEID_FROM_IMEI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable 1xRTT sync MEID from IMEI<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01::enable<BR>0x00::disable,,,,1xRTT,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] Try to write IMEI to DUT<BR>[Expected Result] The MEID of DUT sync from IMEI,Pass,,,,
-8720,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,This is an enhncement over existing 2G STORED SI feature. <BR>When this SBP is enabled first decode SI3 to check if cell is suitable to camp. Only if suitable proceed to use STORED SI.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Stored SI enhancement is enabled<BR>0:Stored SI enhancement is disabled,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8721,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE,modem_sbp_config[113].SBP_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not release PS signalling connection at T3340 expiry<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Do not release PS signalling connection at T3340 expiry by sending SCRI when RAB is active<BR>0x00:Release PS signalling connection at T3340 expiry by sending SCRI when RAB is active,,,__SBP_DISABLE_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) :Y<BR> Test Time (minutes) : 10 mins <BR> [Init] DUT boot up <BR> [Test Step] <BR> 1) UE has established PS services.<BR> 2) When RAB is still established, T3340 expires. <BR> 3)UE doesnot send SCRI when SBP is enabled.",Pass,,,,
-8722,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_3G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,modem_sbp_config[113].SBP_3G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable 3G4G_PINGPONG_REDUCTION <BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-8723,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_5GMM_DISABLE_PARTIAL_CIPHER,modem_sbp_config[108].SBP_5GMM_DISABLE_PARTIAL_CIPHER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable the partial cipher feature when sending initial NAS message<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:Value 0 means UE support partial ciphering, which is spec behavior<BR>Value 1 means UE disable partial ciphering, which turn-off that functionality of partial ciphering",,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) about 10 minutes<BR>[Init] <BR>Test under 5G SA coverage<BR>[Test Step]<BR>Turn on this SBP and leave flight mode do initial Registration in 5G SA,<BR>Check that VGMM won't do partial ciphering for REGISTRATION_REQUEST<BR>[Expected Result]<BR>VGMM won't do partial ciphering for REGISTRATION_REQUEST",Untested,,,,
-8724,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_ADD_TO_FTAI_WHEN_START_T3402,modem_sbp_config[110].SBP_ADD_TO_FTAI_WHEN_START_T3402,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM will add current TAI into FTAI list when starting T3402<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disable,,,__SBP_ADD_TO_FTAI_WHEN_START_T3402__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8725,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_ATT_REMOTE_SIM_LOCK,modem_sbp_config[110].SBP_ATT_REMOTE_SIM_LOCK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>AT&T Remote SIM-ME Lock<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM ME Lock,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8726,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_BAR_CELL_WHEN_NO_CC_SETUP,modem_sbp_config[111].SBP_BAR_CELL_WHEN_NO_CC_SETUP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>On no CC setup for CSFB, indicate uRRC to attempt barring the cell<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8727,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CNAP_SUPPORT,modem_sbp_config[113].SBP_CNAP_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable CNAP features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disable 1: enable,,,,,,,,[Init]<BR>UE camp on 2G/3G NW<BR><BR>[Test Step]<BR>Test on the NW which provides CNAP information to UE<BR><BR>1) Open MCF tool<BR>2) Change the SBP value of SBP_CNAP_SUPPORT from 0 to 1<BR>3) Perform 3G/2G MT call<BR><BR>[Expected Result]<BR>CNAP information received from NW should display on UI,Pass,,,,
-8728,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CUSTOM_BAND_SUPPORT_PER_REGION,modem_sbp_config[113].SBP_CUSTOM_BAND_SUPPORT_PER_REGION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>customize the bands according to the region<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8729,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CUSTOM_CSCB_CONFIG,modem_sbp_config[113].SBP_CUSTOM_CSCB_CONFIG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable custom CB configuration<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1:int,,,,,,,,direct set the value and set CB from AP,Pass,,,,
-8730,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_CUSTOM_SMS_GUARD_TIMER,modem_sbp_config[112].SBP_CUSTOM_SMS_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Guard timer to control SMS operation<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~15},,,,,,,,direct set the value and receive MT SMS,Pass,,,,
-8731,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CUSTOM_SMS_MMS_TIMER,modem_sbp_config[113].SBP_CUSTOM_SMS_MMS_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>If enabled, use custom value for SMS MMS timer<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~3},,,,,,,,direct set the value and send MO SMS,Pass,,,,
-8732,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_CUST_INVALID_CID,modem_sbp_config[111].SBP_CUST_INVALID_CID,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Force set inivalid CID as 0xFFFFFFFF<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR><BR>1:Enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-8733,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_DISABLE_OVERWRITE_RACH_BAR_PARA,modem_sbp_config[110].SBP_DISABLE_OVERWRITE_RACH_BAR_PARA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Turn on to disable overwrite RACH bar parameter<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1:Turn on to disable overwrite RACH bar parameter<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8734,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE,modem_sbp_config[113].SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disabling PLMN check for modem elevator mode<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,Elevator Mode feature,MTK Proprietary,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] Boot up<BR>[Test Step] enable sbp modem_sbp_config[113].SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE<BR>[Expected Result] check for traces SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE,Pass,,,,
-8735,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_EMC_PDUS_SEND_IE_WITHOUT_CHECKING_SPEC_RESTRICTION,modem_sbp_config[112].SBP_EMC_PDUS_SEND_IE_WITHOUT_CHECKING_SPEC_RESTRICTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Emergency PDU session UE configuration setting check<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:bit 0:0:Disable<BR><BR>bit 1:bit 1:1:Enable,,,,MD Config,Modem - Customer Requirement,,,"enable SBP<BR>establish PDU session with S-NSSAI, DNN and set SSC mode to !=1.<BR>see if this information is included in air message (5GMM_UL_NAS_TRANSPORT or PDU_SESSION_ESTABLISHMENT_REQUEST)",Pass,,,,
-8736,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_EMM_CONN_FAIL_LOCAL_DETACH,modem_sbp_config[109].SBP_EMM_CONN_FAIL_LOCAL_DETACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform detach locally if CONN_FAIL during establishing connection.<BR>bit 0:0:Disable. Retry immediately if CONN_FAIL during establishing connection<BR>bit 1:1:Enabled. Perform detach locally if CONN_FAIL during establishing connection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>p.s. Japan JATE 34-8-4 requirement<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EMM_CONN_FAIL_LOCAL_DETACH.<BR>[Test Step]<BR>1.After UE attached 4G successfully and entering idle, plug out SIM card.<BR>2. NW do not response RRCConnectionSetup by ERRC_RRCConnectionSetup.<BR>[Expected Result]<BR>UE would local detach and do not retry RRCConnectionSetup for detach request.",Pass,,,,
-8737,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_EMM_NBC_CR611_CR616_SUPPORT,modem_sbp_config[108].SBP_EMM_NBC_CR611_CR616_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NBC CR 611 and 616 in TS 33.501<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Support<BR>1:Support.,,,__EMM_NBC_CR611_CR616_SUPPORT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8738,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_EMM_NBC_CR616_SUPPORT,modem_sbp_config[114].SBP_EMM_NBC_CR616_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NBC CR 616 in TS 33.501<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Support.<BR>0:Not Support,,,__EMM_NBC_CR616_SUPPORT__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8739,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_EMM_NO_DL_DATA_RELEASE_PAGING_SEMAPHORE,modem_sbp_config[111].SBP_EMM_NO_DL_DATA_RELEASE_PAGING_SEMAPHORE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>The timer length for releasing the semaphore of PS paging cannot be customized<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_EMM_NO_DL_DATA_RELEASE_PAGING_SEMAPHORE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8740,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_EMM_PERFORM_SYNC_TAU_AFTER_MT_SMS,modem_sbp_config[111].SBP_EMM_PERFORM_SYNC_TAU_AFTER_MT_SMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform local release and state sync TAU after MT SMS session end<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__DISABLE_SBP_EMM_PERFORM_SYNC_TAU_AFTER_MT_SMS__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EMM_RELEASE_PAGING_SEMAPHORE_BY_DATA_TYPE,modem_sbp_config[110].SBP_EMM_RELEASE_PAGING_SEMAPHORE_BY_DATA_TYPE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not according to data type to start a timer, when timer expire, release the semaphore of PS paging<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_EMM_RELEASE_PAGING_SEMAPHORE_BY_DATA_TYPE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_ENHANCE_PENDING_ECC_CALL_ON_PLMN_SEARCH,modem_sbp_config[112].SBP_ENHANCE_PENDING_ECC_CALL_ON_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable Enhance pending ECC call on PLMN Search <BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE perfrom ECC call<BR>0:UE will not perform ECC call,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8743,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL,modem_sbp_config[110].SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Abort call when eps only cause 18 and CSFB not preferred<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8744,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EXSR_REJ_FOR_C2K_NO_TAU,modem_sbp_config[110].SBP_EXSR_REJ_FOR_C2K_NO_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Don't perform TAU if Extended Service Reject for C2K CSFB<BR>bit 0:0:Perform TAU<BR>bit 1:1:Don't perform TAU",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disbale,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EXSR_REJ_FOR_C2K_NO_TAU.<BR>[Test Step]<BR>1. Register to an operator which<BR> - Support CDMA2000<BR> - Its LTE network does not support ESR to C2K<BR>2. Trigger a 1xCS call on LTE, the UE would send ESR to the NW<BR>3. Expect NW reject the ESR by Service Reject<BR>4. The UE searchs CDMA2000 NW directly, find a suitable cell and call is successfully proceeded<BR>5. The UE shall go back to LTE NW. In this case, the UE should not trigger TAU<BR>[Expected Result]<BR>UE should not trigger TAU",Untested,,,,
-8745,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,During Manual PLMN LIST GAS will read both SI3 and SI4 . Initially only SI3 was read for PLMN LIST,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS will read both SI3 and SI4 during PLMN List procedure<BR>0:GAS will read only SI3 during PLMN List procedure,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8746,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_HANDLE_MT_SMS_FROM_DIFF_DOMAIN,modem_sbp_config[110].SBP_HANDLE_MT_SMS_FROM_DIFF_DOMAIN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>handle MT SMS from different domain at the same time<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,,,,,"Test in machine (Y) <BR> Test Time (5 minutes) <BR> [Init] <BR> ims registered<BR> [Test Step] <BR> 1.send IMS MT SMS to UE<BR> 2.before AP ack IMS MT SMS to modem, send SGs MT SMS to UE<BR> [Expected Result]<BR> check UE can receive the IMS MT SMS and SGs MT SMS normally",Pass,,,,
-8747,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_IGNORE_2G_CB_DUP_CHECK,modem_sbp_config[112].SBP_IGNORE_2G_CB_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] <BR>Configuration of SBP Feature "Disable duplicate CB check for received CB message"<BR>bit 0::Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8748,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_IGNORE_3G_CB_DUP_CHECK,modem_sbp_config[114].SBP_IGNORE_3G_CB_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable duplicate CB check for received CB message for 3G<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,SBP_IGNORE_3G_CB_DUP_CHECK This feature is valid incase the SBP is 1 else it is not,,,No,MD Config,Modem - Customer Requirement,,,[Test Steps]<BR>1. Switch on the mobile.<BR>2. Let the mobile go to Idle mode.<BR>3. Send CB message.<BR>4. Send the same CB message again<BR><BR>[Expected Result]<BR>When this feature is enabled both these messages has to be received,Pass,,,,
-8749,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE,modem_sbp_config[109].SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>No IMS REG ongoing<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,__SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-8750,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_INACTIVE_MODE_SERVICE_RECOVERY_GMSS_CONTROL,modem_sbp_config[108].SBP_INACTIVE_MODE_SERVICE_RECOVERY_GMSS_CONTROL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>OOS recovery when GMSS control<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-8751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,OTA and OTA BY OP,no,no,no,yes,This SBP will control if 2G should indicate GL1 to increase priority of current channel when more than 2 bad blocks are received.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Increase the priority after two bad blocks<BR>0:Follow old design,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8752,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_CUSTOMIZATION,modem_sbp_config[108].SBP_KOR_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
-8753,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_KSC5601_READ,modem_sbp_config[108].SBP_KOR_KSC5601_READ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR KSC5601 READ customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): N<BR>Test Time (minutes) : 20 minute<BR>[Init]<BR>Alpha ID field of EF_ADN has KSC5601 Character Set and data<BR>[Test Step]<BR>1. Insert SIM that has KSC5601 character set in EF_ADN<BR>2. boot DUT<BR>3. read in Contact APP<BR><BR>[Expected Result],Untested,,,,
-8754,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_KSC5601_WRITE,modem_sbp_config[108].SBP_KOR_KSC5601_WRITE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR KSC5601 WRITE customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8755,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_SAT_SMS,modem_sbp_config[108].SBP_KOR_SAT_SMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR SAT SMS customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8756,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_USSD_KSC5601,modem_sbp_config[108].SBP_KOR_USSD_KSC5601,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable KOR USSD KSC5601 customized features<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8718,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].REMOVE_CLIR_PLUS_PREFIX,modem_sbp_config[109].REMOVE_CLIR_PLUS_PREFIX,Not Support,no,no,no,yes,"Configuration of SBP Feature<BR>Remove the CLIR and plus prefix of call number in +ECPI URC to AP, if these prefix exist.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>not support MCF",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR> Initial Condition:<BR>1. VoLTE enable;<BR>2. carrier support DDD;<BR>3. ims parameter enable_ddd_feature =1<BR>4. enable the para REMOVE_CLIR_PLUS_PREFIX in make file<BR>Detailed Steps:<BR>Make a call to a long distance number.( like '#31#' + call number)<BR>[Expected Result]<BR>display call number info without '+' and '#31#' in phone UI.,Untested,,,,
+8719,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_1XRTT_SYNC_MEID_FROM_IMEI,modem_sbp_config[109].SBP_1XRTT_SYNC_MEID_FROM_IMEI,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable 1xRTT sync MEID from IMEI.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01::enable<BR>0x00::disable,,,This feature can be enabled by compile option __1XRTT_SYNC_MEID_FROM_IMEI__.,1xRTT,3G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 1<BR>[Init] Enable this SBP<BR>[Test Step] Try to write IMEI to DUT<BR>[Expected Result] The MEID of DUT sync from IMEI,Pass,,,,
+8720,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,modem_sbp_config[109].SBP_2G_STORED_SI_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,This enhancement will read SI3 from Stored context to check for cell suitability during cell selection.<BR>Only if this cell is suitable then proceed to decode all SIs from Stored SI context.<BR>If cell is not suitable then read SI from network.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Stored SI enhancement is enabled<BR>0:Stored SI enhancement is disabled,,,This enhancement requires StoredSI feature compilation flag __GAS_STORED_SI_FEAT__ to be ON,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8721,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE,modem_sbp_config[113].SBP_3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE,OTA,no,no,no,yes,Do not release PS signalling connection at T3340 expiry by sending SCRI when RAB is active.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Do not release PS signalling connection at T3340 expiry by sending SCRI when RAB is active<BR>0x00:Release PS signalling connection at T3340 expiry by sending SCRI when RAB is active,,,This SBP can be controlled by compile option __SBP_DISABLE_ 3340_EXPIRY_NO_SCRI_WHEN_RAB_ACTIVE__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) :Y<BR> Test Time (minutes) : 10 mins <BR> [Init] DUT boot up <BR> [Test Step] <BR> 1) UE has established PS services.<BR> 2) When RAB is still established, T3340 expires. <BR> 3)UE doesnot send SCRI when SBP is enabled.",Pass,,,,
+8722,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_3G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,modem_sbp_config[113].SBP_3G4_RESEL_CUSTOM_EUTRA_QRXLEVMIN,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+8723,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_5GMM_DISABLE_PARTIAL_CIPHER,modem_sbp_config[108].SBP_5GMM_DISABLE_PARTIAL_CIPHER,OTA and OTA BY OP,no,no,no,yes,This SBP is used to enable/disable the partial cipher feature for initial NAS message defined in 24.501 4.4.6.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:Value 0 means UE support partial ciphering, which is spec behavior<BR>Value 1 means UE disable partial ciphering, which turn-off that functionality of partial ciphering",,,This feature is controlled by __SBP_5GMM_DISABLE_PARTIAL_CIPHER__.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) about 10 minutes<BR>[Init] <BR>Test under 5G SA coverage<BR>[Test Step]<BR>Turn on this SBP and leave flight mode do initial Registration in 5G SA,<BR>Check that VGMM won't do partial ciphering for REGISTRATION_REQUEST<BR>[Expected Result]<BR>VGMM won't do partial ciphering for REGISTRATION_REQUEST",Pass,,,,
+8724,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_ADD_TO_FTAI_WHEN_START_T3402,modem_sbp_config[110].SBP_ADD_TO_FTAI_WHEN_START_T3402,OTA and OTA BY OP,no,no,no,yes,"TMO requirement about T3402 timer: You don't have to keep UE in 3G cell for 12 minutes.<BR>The UE is registered on 3g cell, brought back to the LTE cell and waits for the 12 minutes.<BR>But if UE returned back LTE, there may occur IRAT cycle phenomenon between 2/3G and 4G due to cell reselection.<BR>So EMM will add current TAI into FTAI list to avoid the cycle phenomenon.<BR>If this SBP is ON : EMM will add current TAI into FTAI list when starting T3402.<BR>If this SBP is OFF : EMM will not add current TAI into FTAI list when starting T3402.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disable,,,N/A,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8725,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_ATT_REMOTE_SIM_LOCK,modem_sbp_config[110].SBP_ATT_REMOTE_SIM_LOCK,Not Support,no,no,no,yes,It's used to turn on AT&T Remote SIM Lock feature.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SIM ME Lock,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8726,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_BAR_CELL_WHEN_NO_CC_SETUP,modem_sbp_config[111].SBP_BAR_CELL_WHEN_NO_CC_SETUP,OTA and OTA BY OP,no,no,no,yes,Optimization is to perform stored and redirected frequency search during CSFB and bar the cell if RRC Connection establishment failed in good radio conditions,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"To enable this feature, compile option __BAR_CELL_WHEN_NO_CC_SETUP__ must be defined",,,,,,Untested,,,,
+8727,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CNAP_SUPPORT,modem_sbp_config[113].SBP_CNAP_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"If the SBP is enabled, the CNAP(Calling NAme Presentation) feature should be included to follow 3GPP 24.096. A customer can control the SBP status whether it's disabled or enabled and DSBP is also supported since Gen93.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disable 1: enable,,,N/A,,,,,[Init]<BR>UE camp on 2G/3G NW<BR><BR>[Test Step]<BR>Test on the NW which provides CNAP information to UE<BR><BR>1) Open MCF tool<BR>2) Change the SBP value of SBP_CNAP_SUPPORT from 0 to 1<BR>3) Perform 3G/2G MT call<BR><BR>[Expected Result]<BR>CNAP information received from NW should display on UI,Pass,,,,
+8728,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CUSTOM_BAND_SUPPORT_PER_REGION,modem_sbp_config[113].SBP_CUSTOM_BAND_SUPPORT_PER_REGION,OTA and OTA BY OP,no,no,no,yes,Supported bands Per regions will be send in ue capability information when this feature is enabled,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP can be controlled by compile option __CUSTOM_MCC_REGION_BANDS__,,,,,,Untested,,,,
+8729,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CUSTOM_CSCB_CONFIG,modem_sbp_config[113].SBP_CUSTOM_CSCB_CONFIG,OTA and OTA BY OP,no,no,no,yes,This feature is to change the CSCB configuration,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1:int,,,This feature is controlled by __CUSTOM_CSCB_CONFIG__.,,,,,direct set the value and set CB from AP,Pass,,,,
+8730,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_CUSTOM_SMS_GUARD_TIMER,modem_sbp_config[112].SBP_CUSTOM_SMS_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled , there will be a guard timer for SMS operation of cutomer's choice.<BR>If there is a gurad timer , SMS shall be completed with in that time.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~15},,,N/A,,,,,direct set the value and receive MT SMS,Pass,,,,
+8731,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_CUSTOM_SMS_MMS_TIMER,modem_sbp_config[113].SBP_CUSTOM_SMS_MMS_TIMER,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~3},,,,,,,,direct set the value and send MO SMS,Pass,,,,
+8732,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_CUST_INVALID_CID,modem_sbp_config[111].SBP_CUST_INVALID_CID,Not Support,no,no,no,yes,"If enabled, Change inivalid CID from 0x0FFFFFFF to 0xFFFFFFFF by request from TC01 customer",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR><BR>1:Enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+8733,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_DISABLE_OVERWRITE_RACH_BAR_PARA,modem_sbp_config[110].SBP_DISABLE_OVERWRITE_RACH_BAR_PARA,OTA and OTA BY OP,no,no,no,yes,"Turn on to disable SBP call back function and RCM custom function to overwrite RACH bar related parameter<BR>Default off to prevent customer to setup incorrect parameter, which makes the rach bar cell mechanism not work.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1:Turn on to disable overwrite RACH bar parameter<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,NA,LTE Protocol (R9 Baseline),4G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8734,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE,modem_sbp_config[113].SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE,OTA,no,no,no,yes,"If this flag is enabled, it means no need to do PLMN check for elevator mode",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This feature depends on __MODEM_ELEVATOR_MODE__,Elevator Mode feature,MTK Proprietary,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] Boot up<BR>[Test Step] enable sbp modem_sbp_config[113].SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE<BR>[Expected Result] check for traces SBP_DISABLE_PLMN_CHECK_FOR_MODEM_ELEVATOR_MODE,Pass,,,,
+8735,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_EMC_PDUS_SEND_IE_WITHOUT_CHECKING_SPEC_RESTRICTION,modem_sbp_config[112].SBP_EMC_PDUS_SEND_IE_WITHOUT_CHECKING_SPEC_RESTRICTION,OTA and OTA BY OP,no,no,no,yes,This SBP is used to decide whether would VGSM check and modify IE configuration for emergency PDU session.<BR>SBP off: VGSM would check and directly modify configuration to what specification require.<BR>SBP on: VGSM would directly send out what upper layer configure.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:bit 0:0:Disable<BR><BR>bit 1:bit 1:1:Enable,,,Different default value is present under compile option __EMC_PDUS_SEND_IE_WITHOUT_CHECKING_SPEC_RESTRICTION__.,MD Config,Modem - Customer Requirement,,,"enable SBP<BR>establish PDU session with S-NSSAI, DNN and set SSC mode to !=1.<BR>see if this information is included in air message (5GMM_UL_NAS_TRANSPORT or PDU_SESSION_ESTABLISHMENT_REQUEST)",Pass,,,,
+8736,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_EMM_CONN_FAIL_LOCAL_DETACH,modem_sbp_config[109].SBP_EMM_CONN_FAIL_LOCAL_DETACH,OTA and OTA BY OP,no,no,no,yes,"CONN_FAIL means T300 timeout or RACH failure. TS 24.301 does not clear specify the UE's behavior if suffering CONN_FAIL. Japan operator's IOT(TELEC) has this kind of test that UE cannot attempt too many random access in a short time. Hence, RRC connection reqesut times need to be contraint. MTK provide this SBP to let user decide whether treat CONN_FAIL as abnormal case b for Detach procedure. And SBP_EMM_CONN_FAIL_ABNORMAL_B is for Attach and TAU procedure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,User could use compile option __SBP_EMM_CONN_FAIL_LOCAL_DETACH__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>p.s. Japan JATE 34-8-4 requirement<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EMM_CONN_FAIL_LOCAL_DETACH.<BR>[Test Step]<BR>1.After UE attached 4G successfully and entering idle, plug out SIM card.<BR>2. NW do not response RRCConnectionSetup by ERRC_RRCConnectionSetup.<BR>[Expected Result]<BR>UE would local detach and do not retry RRCConnectionSetup for detach request.",Pass,,,,
+8737,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_EMM_NBC_CR611_CR616_SUPPORT,modem_sbp_config[108].SBP_EMM_NBC_CR611_CR616_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"This is the NBC CR for #611, #616 in TS 33.501<BR>in CR#611, NAS count value in the mapped EPS security context in 5GS to EPS change. Use current uplink and downlink nas count instead of resetting to 0<BR>in CR#616, uplink NAS Count for Kasme derivation in idle mode mobility to EPS. use the uplink nas count in TAU-REQUEST or ATTACH-REQUEST for Kasme' derivation",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Support<BR>1:Support.,,,.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8738,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_EMM_NBC_CR616_SUPPORT,modem_sbp_config[114].SBP_EMM_NBC_CR616_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"This is the NBC CR for #616 in TS 33.501<BR>in CR#616, uplink NAS Count for Kasme derivation in idle mode mobility to EPS. use the uplink nas count in TAU-REQUEST or ATTACH-REQUEST for Kasme' derivation",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Support.<BR>0:Not Support,,,.,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8739,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_EMM_NO_DL_DATA_RELEASE_PAGING_SEMAPHORE,modem_sbp_config[111].SBP_EMM_NO_DL_DATA_RELEASE_PAGING_SEMAPHORE,OTA and OTA BY OP,no,no,no,yes,"Sometimes, there is no data coming after DRB establishment, but ps paging still occupy semaphore for 2s<BR>If this SBP is enabled, user can customize the timer length for releasing the semaphore of PS paging when DRB established.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,This feature is controlled by __SBP_EMM_NO_DL_DATA_RELEASE_PAGING_SEMAPHORE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8740,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_EMM_PERFORM_SYNC_TAU_AFTER_MT_SMS,modem_sbp_config[111].SBP_EMM_PERFORM_SYNC_TAU_AFTER_MT_SMS,OTA and OTA BY OP,no,no,no,yes,"When SIM1 ping data, SIM2 comes ps paging and receive MT SMS, SIM2 will get the RF. <BR>After SMS release the semaphore, SIM1 might perform state sync TAU and will preempt SIM2 then get the RF back.<BR>However NW comes another SMS during SIM1 performing the state sync TAU.<BR>Therefore, SIM2 has a short time unsync with NW.<BR>Therefore, we perform local release and TAU after MT SMS session end.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,This feature is controlled by __SBP_EMM_PERFORM_SYNC_TAU_AFTER_MT_SMS__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EMM_RELEASE_PAGING_SEMAPHORE_BY_DATA_TYPE,modem_sbp_config[110].SBP_EMM_RELEASE_PAGING_SEMAPHORE_BY_DATA_TYPE,OTA and OTA BY OP,no,no,no,yes,"Some data coming and transfer after DRB establishment will not cost 2s, but paging will always occupy 2s.<BR>If this SBP is enabled, EMM will start a timer according to different data type with the defferent timer value.<BR>When timer expire, release the semaphore of PS paging.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,This feature is controlled by __SBP_EMM_RELEASE_PAGING_SEMAPHORE_BY_DATA_TYPE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_ENHANCE_PENDING_ECC_CALL_ON_PLMN_SEARCH,modem_sbp_config[112].SBP_ENHANCE_PENDING_ECC_CALL_ON_PLMN_SEARCH,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, When there is an pending ECC call and UE perform PLMN search to find an 23G suitable PLMN, If MM update status is not updated, <BR>UE shall trigger any PLMN search and camp on any acceptable PLMN to perform pending emergency call in limited service.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE perfrom ECC call<BR>0:UE will not perform ECC call,,,"if compile option __SBP_DISABLE_ENHANCE_PENDING_ECC_CALL_ON_PLMN_SEARCH__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Pass,,,,
+8743,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL,modem_sbp_config[110].SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL,OTA and OTA BY OP,no,no,no,yes,"According to the requirement, if network set CSFB not preferred in attach accept or tau accept, UE should not search 23G to set up CS CALL when UE is EPS only attached with #18.<BR>If enable this SBP, UE will abort CSFB CALL when eps only #18 with CSFB not preferred.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,This SBP can be controlled by compile option __SBP_EPS_ONLY_CAUSE18_CSFB_NOT_PREFERRED_ABORT_CALL__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8744,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_EXSR_REJ_FOR_C2K_NO_TAU,modem_sbp_config[110].SBP_EXSR_REJ_FOR_C2K_NO_TAU,OTA and OTA BY OP,no,no,no,yes,"Some operator requires not to perform TAU after Extended Service Reject during C2K CSFB procedure. Since MTK's default implementation is to peform TAU once Extended Service Request is sent, so this SBP is added to fulfill some operator's requirement.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disbale,,,"If compile option __EXSR_REJ_FOR_C2K_NO_TAU__ is defined, then SBP is enabled.",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EXSR_REJ_FOR_C2K_NO_TAU.<BR>[Test Step]<BR>1. Register to an operator which<BR> - Support CDMA2000<BR> - Its LTE network does not support ESR to C2K<BR>2. Trigger a 1xCS call on LTE, the UE would send ESR to the NW<BR>3. Expect NW reject the ESR by Service Reject<BR>4. The UE searchs CDMA2000 NW directly, find a suitable cell and call is successfully proceeded<BR>5. The UE shall go back to LTE NW. In this case, the UE should not trigger TAU<BR>[Expected Result]<BR>UE should not trigger TAU",Pass,,,,
+8745,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,modem_sbp_config[111].SBP_GAS_READ_SI4_IN_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,GAS originally reads only SI3 for PLMN List.But sometimes channel conflict between self BCCH and PCH results <BR>in bad blocks causing that cell to be skipped. This issue can be resolved by requesting GL1 to read both SI3 and SI4.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:GAS will read both SI3 and SI4 during PLMN List procedure<BR>0:GAS will read only SI3 during PLMN List procedure,,,Feature require compile option __GAS_READ_SI4_IN_PLMN_LIST__ to be defined.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8746,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_HANDLE_MT_SMS_FROM_DIFF_DOMAIN,modem_sbp_config[110].SBP_HANDLE_MT_SMS_FROM_DIFF_DOMAIN,OTA and OTA BY OP,no,no,no,yes,"If can handle MT SMS from different domain at the same time .<BR><BR>please describe what domains and the background that why we need to add this SBP:<BR><BR>In CMCC's real network MT SMS receiving rate big data statistics action, we found when MTK UE is handling MT SMS from IMS domain , UE will reject new MT SMS from CS domain. It will cause NW think this MT SMS in CS doman fail.<BR>So we make this patch.<BR>In fact , the action that we reject the new SMS from CS domain is following the spec, so we think this patch should be wrapped by SBP.<BR><BR>Domain: IMS domain and CS domain.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,This feature is controlled by __HANDLE_MT_SMS_FROM_DIFF_DOMAIN__,,,,,"Test in machine (Y) <BR> Test Time (5 minutes) <BR> [Init] <BR> ims registered<BR> [Test Step] <BR> 1.send IMS MT SMS to UE<BR> 2.before AP ack IMS MT SMS to modem, send SGs MT SMS to UE<BR> [Expected Result]<BR> check UE can receive the IMS MT SMS and SGs MT SMS normally",Pass,,,,
+8747,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_IGNORE_2G_CB_DUP_CHECK,modem_sbp_config[112].SBP_IGNORE_2G_CB_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8748,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_IGNORE_3G_CB_DUP_CHECK,modem_sbp_config[114].SBP_IGNORE_3G_CB_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled will not perform duplicate detection for CBS messages.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,SBP_IGNORE_3G_CB_DUP_CHECK This feature is valid incase the SBP is 1 else it is not,,,N/A,MD Config,Modem - Customer Requirement,,,[Test Steps]<BR>1. Switch on the mobile.<BR>2. Let the mobile go to Idle mode.<BR>3. Send CB message.<BR>4. Send the same CB message again<BR><BR>[Expected Result]<BR>When this feature is enabled both these messages has to be received,Pass,,,,
+8749,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE,modem_sbp_config[109].SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE,OTA and OTA BY OP,no,no,no,yes,"IMS Reg can't skip ACB check, it will cause IMS can't register.<BR>According to requirement, when IMS Reg is ongoing, establishment type should be set to ENASAS_EST_TYPE_MO_MMTEL_VOICE to skip ACB check.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable.,,,This feature is controlled by __SBP_IMS_REG_ONGOING_SELECT_MMTEL_VOICE__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+8750,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_INACTIVE_MODE_SERVICE_RECOVERY_GMSS_CONTROL,modem_sbp_config[108].SBP_INACTIVE_MODE_SERVICE_RECOVERY_GMSS_CONTROL,OTA and OTA BY OP,no,no,no,yes,"When this SBP is enabled, UE can save more power by modifying scan time and sleep time. Scan time is the time in which UE use to search network. Sleep time is the time in which UE use to not search network. If UE is in a no signal area, after scan time and sleep time has run a round to ensure there is no signal, sleep time can be modified longer to save power. There is still a range for scan time and sleep time to ensure unexpected numbers.<BR>When this SBP is enabled, SBP_INACTIVE_MODE_SERVICE_RECOVERY must be also enabled.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,tbd,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+8751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,modem_sbp_config[111].SBP_INC_BCCH_DECODE_PRIO_BG_LIST,OTA and OTA BY OP,no,no,no,yes,2G Background PLMN LIST is going on in IDLE_STATE. Bad blocks are received from L1 due to BCCH conflict with PCH. Increase the BCCH priority after two bad blocks.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Increase the priority after two bad blocks<BR>0:Follow old design,,,This feature is controlled by __INC_BCCH_DECODE_PRIO_BG_LIST__ flag,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8752,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_CUSTOMIZATION,modem_sbp_config[108].SBP_KOR_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"If enabled, the customized features for KOR TC01 customer would be included",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disable<BR>1: enable,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+8753,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_KSC5601_READ,modem_sbp_config[108].SBP_KOR_KSC5601_READ,OTA and OTA BY OP,no,no,no,yes,"If enabled, the customized features for KOR KSC5601 READ would be included",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): N<BR>Test Time (minutes) : 20 minute<BR>[Init]<BR>Alpha ID field of EF_ADN has KSC5601 Character Set and data<BR>[Test Step]<BR>1. Insert SIM that has KSC5601 character set in EF_ADN<BR>2. boot DUT<BR>3. read in Contact APP<BR><BR>[Expected Result],Pass,,,,
+8754,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_KSC5601_WRITE,modem_sbp_config[108].SBP_KOR_KSC5601_WRITE,OTA and OTA BY OP,no,no,no,yes,"If enabled, the customized features for KOR KSC5601 WRITE would be included",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8755,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_SAT_SMS,modem_sbp_config[108].SBP_KOR_SAT_SMS,OTA and OTA BY OP,no,no,no,yes,"If enabled, the customized features for KOR SAT SMS would be included",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8756,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[108].SBP_KOR_USSD_KSC5601,modem_sbp_config[108].SBP_KOR_USSD_KSC5601,OTA and OTA BY OP,no,no,no,yes,"If enabled, the customized features for KOR USSD KSC5601 would be included",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8757,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[113].SBP_NAS_ROAMING_DISABLE_ENDC,modem_sbp_config[113].SBP_NAS_ROAMING_DISABLE_ENDC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable duplicate CB check for received CB message<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,(Sprint) System Selection,OP Requirement,,,,Pass,,,,
-8758,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_NR_SUL,modem_sbp_config[111].SBP_NR_SUL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR Supplementary Uplink feature<BR>bit 0:Not Enabled<BR>bit 1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,SUL,SUL,,,Test in machine (Y/N): N<BR>Test Time (minutes): 10<BR>[Init] follow MCF RD IT initial steps<BR>[Test Step] follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>[Expected Result] Value changes in MCF Dump,Pass,,,,
-8759,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_RAC_DSPL_C2K_WHEN_1X_CALL_ONGOING,modem_sbp_config[114].SBP_RAC_DSPL_C2K_WHEN_1X_CALL_ONGOING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>report unknown on PS domain when C2K CS call<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,follow MCF RDIT SOP,Pass,,,,
-8760,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_RAC_DSPL_OPT_FOR_SET_RAT,modem_sbp_config[112].SBP_RAC_DSPL_OPT_FOR_SET_RAT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Hide the OOS/searching report during set RAT search<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8761,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_RETRY_RP_ACK_WHEN_RLC_FAILURE,modem_sbp_config[110].SBP_RETRY_RP_ACK_WHEN_RLC_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>when RLC failure happens, UE will re-send RP-ACK immediately<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,,,,,Test in machine (Y) <BR> Test Time (5 minutes) <BR> [Init] <BR> IMS not registered and LTE attached<BR> [Test Step] <BR> 1.send MT SMS to UE<BR> 2.HO happens when UE sends RP-ACK to SS<BR> [Expected Result]<BR> RP-ACK to SS after HO done,Pass,,,,
-8762,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_SIGNAL_REPORT_BY_CUSTOMIZED_THRESHOLD,modem_sbp_config[111].SBP_SIGNAL_REPORT_BY_CUSTOMIZED_THRESHOLD,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Signal report by customized threshold<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Default value. Disable this SBP.<BR>1:The signal report frequency can be reduced based on the specified thresholds. Yet, other applications which heavily rely on accurate signal power report can behave belatedly.",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8758,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_NR_SUL,modem_sbp_config[111].SBP_NR_SUL,OTA and OTA BY OP,no,no,no,yes,This SBP is used to control NR Supplementary Uplink feature support.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,N/A,SUL,SUL,,,Test in machine (Y/N): N<BR>Test Time (minutes): 10<BR>[Init] follow MCF RD IT initial steps<BR>[Test Step] follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>[Expected Result] Value changes in MCF Dump,Pass,,,,
+8759,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_RAC_DSPL_C2K_WHEN_1X_CALL_ONGOING,modem_sbp_config[114].SBP_RAC_DSPL_C2K_WHEN_1X_CALL_ONGOING,OTA and OTA BY OP,no,no,no,yes,Enable this feature to report unknown on PS domain when C2K CS call,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,follow MCF RDIT SOP,Pass,,,,
+8760,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_RAC_DSPL_OPT_FOR_SET_RAT,modem_sbp_config[112].SBP_RAC_DSPL_OPT_FOR_SET_RAT,Not Support,no,no,no,yes,Enable this feature to hide the OOS/searching report during set RAT search,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8761,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[110].SBP_RETRY_RP_ACK_WHEN_RLC_FAILURE,modem_sbp_config[110].SBP_RETRY_RP_ACK_WHEN_RLC_FAILURE,OTA and OTA BY OP,no,no,no,yes,"When HO happens, the RP-ACK will be sent failure; In order to improve the .",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,This feature is controlled by __RETRY_RP_ACK_WHEN_RLC_FAILURE__,,,,,Test in machine (Y) <BR> Test Time (5 minutes) <BR> [Init] <BR> IMS not registered and LTE attached<BR> [Test Step] <BR> 1.send MT SMS to UE<BR> 2.HO happens when UE sends RP-ACK to SS<BR> [Expected Result]<BR> RP-ACK to SS after HO done,Pass,,,,
+8762,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[111].SBP_SIGNAL_REPORT_BY_CUSTOMIZED_THRESHOLD,modem_sbp_config[111].SBP_SIGNAL_REPORT_BY_CUSTOMIZED_THRESHOLD,Not Support,no,no,no,yes,"After enable this SBP, the signal report frequency can be reduced based on applied threshold. Yet,<BR>it can affect power consumption, power level icon display accuracy, 3GPP and non-3GPP (e.g. Wi-Fi)<BR>handover immediacy, and anyother applications which heavily rely on accurate signal power report.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Default value. Disable this SBP.<BR>1:The signal report frequency can be reduced based on the specified thresholds. Yet, other applications which heavily rely on accurate signal power report can behave belatedly.",,,custom_cell_power_level_threshold_table[] in custom_l4_utility.c,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8763,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_SIM_DETACH_WAIT_FOR_IMS_DEREG,modem_sbp_config[109].SBP_SIM_DETACH_WAIT_FOR_IMS_DEREG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Hold SIM detach until IMS deregistered<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable this SBP.<BR>[Test Step]<BR>Flight mode on/off and wait IMS registers successfully.<BR>Then, plug out the SIM card.<BR>[Expected Result]<BR>After IMS deregisters completed and UE perform detach request(e.g. send detach request to NW).",Pass,,,,
-8764,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_SNIFFER_IN_VIRTUAL_MODE,modem_sbp_config[112].SBP_SNIFFER_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Continue sniffer in virtual mode<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0:Disable<BR>1:Enable,,,This feature will be enabled when __SBP_SNIFFER_IN_VIRTUAL_MODE__ is enabled,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10-15<BR>[Init] Dual SIM, Initially camp on 3G<BR>[Test Step] UE should go OOS on one SIM and trigger sniffer, another should be in connected mode<BR>[Expected Result] If SBP_SNIFFER_IN_VIRTUAL_MODE is 1, even in virtual mode in SIM1 sniffer should continue",Untested,,,,
-8765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,OTA and OTA BY OP,no,no,no,yes,Gaming performance improvement to not read SI2Q in Virtual Idle,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Do not read SI2Q in virtual mode<BR>0:Read SI2Q in virtual mode,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8766,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_TC01_SHORT_T3240_FOR_ECC,modem_sbp_config[109].SBP_TC01_SHORT_T3240_FOR_ECC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Using short T3240 timer value<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8767,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_USE_MM_INTERNAL_T3212_PERIOD_SETTING,modem_sbp_config[112].SBP_USE_MM_INTERNAL_T3212_PERIOD_SETTING,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use MM internal T3212 period setting<BR>bit 0:0:MM shall use the T3212 value provided by network from SIB1 message<BR>bit 1:1:If the T3212 value provided by network in SIB1 message is greater than 2hrs, MM shall keep the T3212 timer value as 2hrs",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:If the T3212 value provided by network in SIB1 message is greater than 2hrs, MM shall keep the T3212 timer value as 2hrs<BR>0x00:MM shall use the T3212 value provided by network from SIB1 message",,,__SBP_ENABLE_USE_MM_INTERNAL_T3212_PERIOD_SETTING__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) :10 mins<BR>[Init] DUT boot up<BR>[Test Step]<BR>> Trigger Registration in 3G for CS domain<BR>> Once registration is successful then see T3212 starts and <BR> observe the time value,Pass,,,,
-8768,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_VONR_ENH,modem_sbp_config[109].SBP_VONR_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When IMS CALL ongoing, need IMS response to judge whether performing CSFB or not<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,NR RRC VoNR Enhancement - Paging receiving ratio _ NR occupying rate _ HO enhancement,MTK Proprietary,,,,Untested,,,,
-8769,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[66].SBP_EAS_POWER_LEVEL_IND_PERIOD_CONN,modem_sbp_data_config[66].SBP_EAS_POWER_LEVEL_IND_PERIOD_CONN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Control POWER_LEVEL_IND sending frequency in connected by SBP_ID.<BR>bit 0:0:EAS_POWER_LEVEL_IND_PERIOD_CONN 1000<BR>bit 1:1:EAS_POWER_LEVEL_IND_PERIOD_CONN 1500<BR>bit 2:2:EAS_POWER_LEVEL_IND_PERIOD_CONN 2000<BR>bit 3:3:EAS_POWER_LEVEL_IND_PERIOD_CONN 2500<BR>bit 4:4:EAS_POWER_LEVEL_IND_PERIOD_CONN 3000<BR>bit 5:5:EAS_POWER_LEVEL_IND_PERIOD_CONN 3500<BR>bit 6:6:EAS_POWER_LEVEL_IND_PERIOD_CONN 4000<BR>bit 7:7:EAS_POWER_LEVEL_IND_PERIOD_CONN 4500<BR>bit 8:8:EAS_POWER_LEVEL_IND_PERIOD_CONN 5000<BR>bit 9:9:EAS_POWER_LEVEL_IND_PERIOD_CONN 5500<BR>bit 10:10:EAS_POWER_LEVEL_IND_PERIOD_CONN 6000<BR>bit 11:11:EAS_POWER_LEVEL_IND_PERIOD_CONN 6500<BR>bit 12:12:EAS_POWER_LEVEL_IND_PERIOD_CONN 7000<BR>bit 13:13:EAS_POWER_LEVEL_IND_PERIOD_CONN 7500<BR>bit 14:14:EAS_POWER_LEVEL_IND_PERIOD_CONN 8000<BR>bit 15:15:EAS_POWER_LEVEL_IND_PERIOD_CONN 8500<BR>bit 16:16:EAS_POWER_LEVEL_IND_PERIOD_CONN 9000<BR>bit 17:17:EAS_POWER_LEVEL_IND_PERIOD_CONN 9500<BR>bit 18:18:EAS_POWER_LEVEL_IND_PERIOD_CONN 10000",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-8770,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[65].SBP_EAS_POWER_LEVEL_IND_PERIOD_IDLE,modem_sbp_data_config[65].SBP_EAS_POWER_LEVEL_IND_PERIOD_IDLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Control POWER_LEVEL_IND sending frequency in idle by SBP_ID.<BR>bit 0:0:EAS_POWER_LEVEL_IND_PERIOD_CONN 1000<BR>bit 1:1:EAS_POWER_LEVEL_IND_PERIOD_CONN 1500<BR>bit 2:2:EAS_POWER_LEVEL_IND_PERIOD_CONN 2000<BR>bit 3:3:EAS_POWER_LEVEL_IND_PERIOD_CONN 2500<BR>bit 4:4:EAS_POWER_LEVEL_IND_PERIOD_CONN 3000<BR>bit 5:5:EAS_POWER_LEVEL_IND_PERIOD_CONN 3500<BR>bit 6:6:EAS_POWER_LEVEL_IND_PERIOD_CONN 4000<BR>bit 7:7:EAS_POWER_LEVEL_IND_PERIOD_CONN 4500<BR>bit 8:8:EAS_POWER_LEVEL_IND_PERIOD_CONN 5000<BR>bit 9:9:EAS_POWER_LEVEL_IND_PERIOD_CONN 5500<BR>bit 10:10:EAS_POWER_LEVEL_IND_PERIOD_CONN 6000<BR>bit 11:11:EAS_POWER_LEVEL_IND_PERIOD_CONN 6500<BR>bit 12:12:EAS_POWER_LEVEL_IND_PERIOD_CONN 7000<BR>bit 13:13:EAS_POWER_LEVEL_IND_PERIOD_CONN 7500<BR>bit 14:14:EAS_POWER_LEVEL_IND_PERIOD_CONN 8000<BR>bit 15:15:EAS_POWER_LEVEL_IND_PERIOD_CONN 8500<BR>bit 16:16:EAS_POWER_LEVEL_IND_PERIOD_CONN 9000<BR>bit 17:17:EAS_POWER_LEVEL_IND_PERIOD_CONN 9500<BR>bit 18:18:EAS_POWER_LEVEL_IND_PERIOD_CONN 10000",BIT,8,,8,0x08,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-8771,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[72].SBP_IDC_IM_NR_TX_PWR,modem_sbp_data_config[72].SBP_IDC_IM_NR_TX_PWR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Set NR max Tx power when IDC is enabled<BR>bit 1:1:TX_PWR_1<BR>bit 2:2:TX_PWR_2<BR>bit 3:3:TX_PWR_3<BR>bit 4:4:TX_PWR_4<BR>bit 5:5:TX_PWR_5<BR>bit 6:6:TX_PWR_6<BR>bit 7:7:TX_PWR_7<BR>bit 8:8:TX_PWR_8<BR>bit 9:9:TX_PWR_9<BR>bit 10:10:TX_PWR_10<BR>bit 11:11:TX_PWR_11<BR>bit 12:12:TX_PWR_12<BR>bit 13:13:TX_PWR_13<BR>bit 14:14:TX_PWR_14<BR>bit 15:15:TX_PWR_15<BR>bit 16:16:TX_PWR_16<BR>bit 17:17:TX_PWR_17<BR>bit 18:18:TX_PWR_18<BR>bit 19:19:TX_PWR_19<BR>bit 20:20:TX_PWR_20<BR>bit 21:21:TX_PWR_21<BR>bit 22:22:TX_PWR_22<BR>bit 23:23:TX_PWR_23",BIT,8,,8,17,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x17,,,,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[72] -> SBP_IDC_IM_NR_TX_PWR<BR><BR>PS Intergrate Trace => "[L1][IDC] nr_idc_power_backoff_ntf():"<BR>=> (check: new TX power and old TX power),Pass,,,,
-8772,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[73].SBP_IDC_INT_DETECT,modem_sbp_data_config[73].SBP_IDC_INT_DETECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable IDC interference detector at MD side<BR>bit 0:0:Disable IDC interference detector at MD side<BR>bit 1:1:Enable IDC interference detector at MD side",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,In-Device Coexistence (IDC),Cross CONSYS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step] IDC tdm scenario.<BR>[Expected Result] expected trace in L1 trace<BR>search :([INT] or det),Untested,,,,
-8773,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[69].SBP_IDC_TDM_LTE_CONSYS_WINDOW,modem_sbp_data_config[69].SBP_IDC_TDM_LTE_CONSYS_WINDOW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Set CONSYS TDM window duration with LTE when IDC is enabled<BR>bit 10:10:LTE_CONSYS_WINDOW_10<BR>bit 20:20:LTE_CONSYS_WINDOW_20<BR>bit 30:30:LTE_CONSYS_WINDOW_30<BR>bit 40:40:LTE_CONSYS_WINDOW_40<BR>bit 50:50:LTE_CONSYS_WINDOW_50<BR>bit 60:60:LTE_CONSYS_WINDOW_60<BR>bit 70:70:LTE_CONSYS_WINDOW_70<BR>bit 80:80:LTE_CONSYS_WINDOW_80<BR>bit 90:90:LTE_CONSYS_WINDOW_90<BR>bit 100:100:LTE_CONSYS_WINDOW_100<BR>bit 110:110:LTE_CONSYS_WINDOW_110<BR>bit 120:120:LTE_CONSYS_WINDOW_120<BR>bit 130:130:LTE_CONSYS_WINDOW_130<BR>bit 140:140:LTE_CONSYS_WINDOW_140<BR>bit 150:150:LTE_CONSYS_WINDOW_150<BR>bit 160:160:LTE_CONSYS_WINDOW_160<BR>bit 170:170:LTE_CONSYS_WINDOW_170<BR>bit 180:180:LTE_CONSYS_WINDOW_180<BR>bit 190:190:LTE_CONSYS_WINDOW_190<BR>bit 200:200:LTE_CONSYS_WINDOW_200",BIT,8,,8,0x6e,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[69] -> SBP_IDC_TDM_LTE_CONSYS_WINDOW<BR><BR>PS Intergrate Trace => [SBP data0]SBP_IDC_TDM_LTE_CONSYS_WINDOW,Pass,,,,
-8774,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[68].SBP_IDC_TDM_LTE_WINDOW,modem_sbp_data_config[68].SBP_IDC_TDM_LTE_WINDOW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Set LTE TDM window duration when IDC is enabled<BR>bit 10:10:LTE_WINDOW_10<BR>bit 20:20:LTE_WINDOW_20<BR>bit 30:30:LTE_WINDOW_30<BR>bit 40:40:LTE_WINDOW_40<BR>bit 50:50:LTE_WINDOW_50<BR>bit 60:60:LTE_WINDOW_60<BR>bit 70:70:LTE_WINDOW_70<BR>bit 80:80:LTE_WINDOW_80<BR>bit 90:90:LTE_WINDOW_90<BR>bit 100:100:LTE_WINDOW_100<BR>bit 110:110:LTE_WINDOW_110<BR>bit 120:120:LTE_WINDOW_120<BR>bit 130:130:LTE_WINDOW_130<BR>bit 140:140:LTE_WINDOW_140<BR>bit 150:150:LTE_WINDOW_150<BR>bit 160:160:LTE_WINDOW_160<BR>bit 170:170:LTE_WINDOW_170<BR>bit 180:180:LTE_WINDOW_180<BR>bit 190:190:LTE_WINDOW_190<BR>bit 200:200:LTE_WINDOW_200",BIT,8,,8,0x82,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[68] -> SBP_IDC_TDM_LTE_WINDOW<BR><BR>PS Intergrate Trace => "SBP_IDC_TDM_LTE_WINDOW",Pass,,,,
-8775,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[71].SBP_IDC_TDM_NR_CONSYS_WINDOW,modem_sbp_data_config[71].SBP_IDC_TDM_NR_CONSYS_WINDOW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Set CONSYS TDM window duration with NR when IDC is enabled<BR>bit 10:10:NR_CONSYS_WINDOW_10<BR>bit 20:20:NR_CONSYS_WINDOW_20<BR>bit 30:30:NR_CONSYS_WINDOW_30<BR>bit 40:40:NR_CONSYS_WINDOW_40<BR>bit 50:50:NR_CONSYS_WINDOW_50<BR>bit 60:60:NR_CONSYS_WINDOW_60<BR>bit 70:70:NR_CONSYS_WINDOW_70<BR>bit 80:80:NR_CONSYS_WINDOW_80<BR>bit 90:90:NR_CONSYS_WINDOW_90<BR>bit 100:100:NR_CONSYS_WINDOW_100<BR>bit 110:110:NR_CONSYS_WINDOW_110<BR>bit 120:120:NR_CONSYS_WINDOW_120<BR>bit 130:130:NR_CONSYS_WINDOW_130<BR>bit 140:140:NR_CONSYS_WINDOW_140<BR>bit 150:150:NR_CONSYS_WINDOW_150<BR>bit 160:160:NR_CONSYS_WINDOW_160<BR>bit 170:170:NR_CONSYS_WINDOW_170<BR>bit 180:180:NR_CONSYS_WINDOW_180<BR>bit 190:190:NR_CONSYS_WINDOW_190<BR>bit 200:200:NR_CONSYS_WINDOW_200",BIT,8,,8,0x6e,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[71] -> SBP_IDC_TDM_NR_CONSYS_WINDOW<BR><BR>PS Intergrate Trace => SBP_IDC_TDM_NR_CONSYS_WINDOW,Pass,,,,
-8776,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[70].SBP_IDC_TDM_NR_WINDOW,modem_sbp_data_config[70].SBP_IDC_TDM_NR_WINDOW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Set NR TDM window duration when IDC is enabled<BR>bit 10:10:NR_WINDOW_10<BR>bit 20:20:NR_WINDOW_20<BR>bit 30:30:NR_WINDOW_30<BR>bit 40:40:NR_WINDOW_40<BR>bit 50:50:NR_WINDOW_50<BR>bit 60:60:NR_WINDOW_60<BR>bit 70:70:NR_WINDOW_70<BR>bit 80:80:NR_WINDOW_80<BR>bit 90:90:NR_WINDOW_90<BR>bit 100:100:NR_WINDOW_100<BR>bit 110:110:NR_WINDOW_110<BR>bit 120:120:NR_WINDOW_120<BR>bit 130:130:NR_WINDOW_130<BR>bit 140:140:NR_WINDOW_140<BR>bit 150:150:NR_WINDOW_150<BR>bit 160:160:NR_WINDOW_160<BR>bit 170:170:NR_WINDOW_170<BR>bit 180:180:NR_WINDOW_180<BR>bit 190:190:NR_WINDOW_190<BR>bit 200:200:NR_WINDOW_200",BIT,8,,8,0x82,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[70] -> SBP_IDC_TDM_NR_WINDOW<BR><BR>PS Intergrate Trace => SBP_IDC_TDM_NR_WINDOW,Pass,,,,
-8777,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[67].SBP_SIM_POLL_TIMER_VALUE,modem_sbp_data_config[67].SBP_SIM_POLL_TIMER_VALUE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>SIM Poll timer value<BR>bit 0:0:Feature Disabled<BR>bit 25:25:25 seconds<BR>bit 26:26:26 seconds<BR>bit 27:27:27 seconds<BR>bit 28:28:28 seconds<BR>bit 29:29:29 seconds<BR>bit 30:30:30 seconds<BR><BR>Purpose:<BR>As per ETSI 102.221 clause 14.6.2 and 3GPP 31.102 clause 5.1.9, the terminal shall send STATUS command to UICC within 30 seconds of inactivity. As per current implementation UE uses default timer value set as 26.5 seconds. It is up to the UE implementation to choose timer value within 30 seconds Since this timer value is up to UE implementation, we provide this SBP for customization. <BR><BR>Note:",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,25~30:time interval of STATUS commands in seconds,,,"If SIM polling suspension is enabled (default enabled), the time interval is valid only for first 10 STATUS commands",Subscriber Identity Module (Release 4),2G,,,"1. FTA should be diabled<BR>2. Set the SBP to any valid value, for example 28<BR>3. Reboot the device<BR>4. when device is in idle state, i.e no SIM I/O ongoing, observe the time interval between each status command in ELT logs<BR> MOD_SIM, , TRACE_GROUP_3, sim_al_status()<BR><BR>Note:<BR>1. Time interval may change if there is another SIM I/O happened between STATUS. it is normal.<BR>2. The discrepancy of 100~200 msec is allowed as it is OS timer",Untested,,,,
-8778,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[74].SBP_SMS_GUARD_TIMER,modem_sbp_data_config[74].SBP_SMS_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Guard timer for SMS operation",BIT,8,,8,0xb4,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~15},,,,,,,,direct set the value and receive MT SMS,Pass,,,,
-8779,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[75].SBP_SMS_MMS_TIMER,modem_sbp_data_config[75].SBP_SMS_MMS_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Guard timer for SMS operation",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~3},,,,,,,,direct set the value and send MO SMS,Pass,,,,
+8764,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_SNIFFER_IN_VIRTUAL_MODE,modem_sbp_config[112].SBP_SNIFFER_IN_VIRTUAL_MODE,OTA and OTA BY OP,no,no,no,yes,Continue sniffer in virtual mode same like normal mode.,BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0:Disable<BR>1:Enable,,,This SBP can be controlled by compile option __SBP_SNIFFER_IN_VIRTUAL_MODE__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10-15<BR>[Init] Dual SIM, Initially camp on 3G<BR>[Test Step] UE should go OOS on one SIM and trigger sniffer, another should be in connected mode<BR>[Expected Result] If SBP_SNIFFER_IN_VIRTUAL_MODE is 1, even in virtual mode in SIM1 sniffer should continue",Untested,,,,
+8765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,modem_sbp_config[112].SBP_STOP_SI2Q_READ_IN_VIRTUAL_IDLE,OTA and OTA BY OP,no,no,no,yes,"For gaming performance improvement do not read SI2Q when <BR>[1]NON-TEST Sim<BR>[2]CMCC Operator<BR>[3]GSM is the only RAT (or) RAT : UMTS_GSM , but UMTS is not available in that area. Therefore no neighbour 3G cells will be reported in SI2Q.<BR>[4]In Virtual Mode<BR>[5]Non-data SIM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Do not read SI2Q in virtual mode<BR>0:Read SI2Q in virtual mode,,,Feature require compile option __STOP_SI2Q_READ_IN_VIRTUAL_IDLE__ to be defined.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8766,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_TC01_SHORT_T3240_FOR_ECC,modem_sbp_config[109].SBP_TC01_SHORT_T3240_FOR_ECC,OTA and OTA BY OP,no,no,no,yes,"If enabled, the T3240 value will be 2s after CSFB ECC end",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,N/A,,,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8767,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[112].SBP_USE_MM_INTERNAL_T3212_PERIOD_SETTING,modem_sbp_config[112].SBP_USE_MM_INTERNAL_T3212_PERIOD_SETTING,OTA,no,no,no,yes,"When SBP is enabled, If the T3212 value provided by network in SIB1 message is greater than 2hrs, <BR>MM shall keep the T3212 timer value as 2hrs.<BR>When SBP is disabled, MM shall use the T3212 value provided by network from SIB1 message.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:If the T3212 value provided by network in SIB1 message is greater than 2hrs, MM shall keep the T3212 timer value as 2hrs<BR>0x00:MM shall use the T3212 value provided by network from SIB1 message",,,"if compile option __SBP_DISABLE_USE_MM_INTERNAL_T3212_PERIOD_SETTING__ is defined, the SBP is disabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) :10 mins<BR>[Init] DUT boot up<BR>[Test Step]<BR>> Trigger Registration in 3G for CS domain<BR>> Once registration is successful then see T3212 starts and <BR> observe the time value,Pass,,,,
+8768,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[109].SBP_VONR_ENH,modem_sbp_config[109].SBP_VONR_ENH,OTA and OTA BY OP,no,no,no,yes,NRRC RRC VoNR enhancement include paging receiving ratio / NR occupying rate / HO enhancement.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,This SBP can be controlled by compile option __SBP_VONR_ENH__,NR RRC VoNR Enhancement - Paging receiving ratio _ NR occupying rate _ HO enhancement,MTK Proprietary,,,,Untested,,,,
+8769,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[66].SBP_EAS_POWER_LEVEL_IND_PERIOD_CONN,modem_sbp_data_config[66].SBP_EAS_POWER_LEVEL_IND_PERIOD_CONN,OTA and OTA BY OP,no,no,no,yes,Control POWER_LEVEL_IND sending frequency in idle by SBP_ID.,BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+8770,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[65].SBP_EAS_POWER_LEVEL_IND_PERIOD_IDLE,modem_sbp_data_config[65].SBP_EAS_POWER_LEVEL_IND_PERIOD_IDLE,OTA and OTA BY OP,no,no,no,yes,Control POWER_LEVEL_IND sending frequency in idle by SBP_ID.,BIT,8,,8,0x08,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+8771,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[72].SBP_IDC_IM_NR_TX_PWR,modem_sbp_data_config[72].SBP_IDC_IM_NR_TX_PWR,OTA and OTA BY OP,no,no,no,yes,The value is applied to NR Tx max power after CONSYS notifies NR to reduce Tx max power,BIT,8,,8,17,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x17,,,N/A,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[72] -> SBP_IDC_IM_NR_TX_PWR<BR><BR>PS Intergrate Trace => "[L1][IDC] nr_idc_power_backoff_ntf():"<BR>=> (check: new TX power and old TX power),Pass,,,,
+8772,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[73].SBP_IDC_INT_DETECT,modem_sbp_data_config[73].SBP_IDC_INT_DETECT,OTA and OTA BY OP,no,no,no,yes,This feature is used to notify CONSYS that whether LTE rx needs CONSYS's tx to do TDM or not.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,N/A,In-Device Coexistence (IDC),Cross CONSYS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step] IDC tdm scenario.<BR>[Expected Result] expected trace in L1 trace<BR>search :([INT] or det),Untested,,,,
+8773,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[69].SBP_IDC_TDM_LTE_CONSYS_WINDOW,modem_sbp_data_config[69].SBP_IDC_TDM_LTE_CONSYS_WINDOW,OTA and OTA BY OP,no,no,no,yes,The value is applied to CONSYS TDM window duration after CONSYS notifies LTE to do TDM solution.,BIT,8,,8,0x6e,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,N/A,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[69] -> SBP_IDC_TDM_LTE_CONSYS_WINDOW<BR><BR>PS Intergrate Trace => [SBP data0]SBP_IDC_TDM_LTE_CONSYS_WINDOW,Pass,,,,
+8774,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[68].SBP_IDC_TDM_LTE_WINDOW,modem_sbp_data_config[68].SBP_IDC_TDM_LTE_WINDOW,OTA and OTA BY OP,no,no,no,yes,The value is applied to LTE TDM window duration after CONSYS notifies LTE to do TDM solution.,BIT,8,,8,0x82,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,N/A,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[68] -> SBP_IDC_TDM_LTE_WINDOW<BR><BR>PS Intergrate Trace => "SBP_IDC_TDM_LTE_WINDOW",Pass,,,,
+8775,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[71].SBP_IDC_TDM_NR_CONSYS_WINDOW,modem_sbp_data_config[71].SBP_IDC_TDM_NR_CONSYS_WINDOW,OTA and OTA BY OP,no,no,no,yes,The value is applied to CONSYS TDM window duration after CONSYS notifies NR to do TDM solution.,BIT,8,,8,0x6e,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,N/A,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[71] -> SBP_IDC_TDM_NR_CONSYS_WINDOW<BR><BR>PS Intergrate Trace => SBP_IDC_TDM_NR_CONSYS_WINDOW,Pass,,,,
+8776,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[70].SBP_IDC_TDM_NR_WINDOW,modem_sbp_data_config[70].SBP_IDC_TDM_NR_WINDOW,OTA and OTA BY OP,no,no,no,yes,The value is applied to NR TDM window duration after CONSYS notifies NR to do TDM solution.,BIT,8,,8,0x82,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x0a,0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x 82, 0x8c, 0x96, 0xa0, 0xaa, 0xb4, 0xbe, 0xc8",,,N/A,MD Config,Modem - Customer Requirement,,,MCF Tool =><BR>Other LID ->NVRAM_EF_SBP_MODEM_CONFIG_LID <BR>=> modem_sbp_config[70] -> SBP_IDC_TDM_NR_WINDOW<BR><BR>PS Intergrate Trace => SBP_IDC_TDM_NR_WINDOW,Pass,,,,
+8777,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[67].SBP_SIM_POLL_TIMER_VALUE,modem_sbp_data_config[67].SBP_SIM_POLL_TIMER_VALUE,OTA,no,no,no,yes,"As per ETSI 102.221 clause 14.6.2 and 3GPP 31.102 clause 5.1.9, the terminal shall send STATUS command to UICC within 30 seconds of inactivity. As per current implementation, UE uses default timer value set as 26.5 seconds. <BR>It is up to the UE implementation to choose timer value within 30 seconds. <BR>Since this timer value is up to UE implementation, we provide this SBP for customization.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,25~30:time interval of STATUS commands in seconds,,,N/A,Subscriber Identity Module (Release 4),2G,,,"1. FTA should be diabled<BR>2. Set the SBP to any valid value, for example 28<BR>3. Reboot the device<BR>4. when device is in idle state, i.e no SIM I/O ongoing, observe the time interval between each status command in ELT logs<BR> MOD_SIM, , TRACE_GROUP_3, sim_al_status()<BR><BR>Note:<BR>1. Time interval may change if there is another SIM I/O happened between STATUS. it is normal.<BR>2. The discrepancy of 100~200 msec is allowed as it is OS timer",Pass,,,,
+8778,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[74].SBP_SMS_GUARD_TIMER,modem_sbp_data_config[74].SBP_SMS_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,This SBP data value acts as a guard timer for MO SMS operation.,BIT,8,,8,0xb4,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~15},,,N/A,,,,,direct set the value and receive MT SMS,Pass,,,,
+8779,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[75].SBP_SMS_MMS_TIMER,modem_sbp_data_config[75].SBP_SMS_MMS_TIMER,OTA and OTA BY OP,no,no,no,yes,This SBP data value acts as a guard timer for MO SMS operation.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~3},,,,,,,,direct set the value and send MO SMS,Pass,,,,
8781,61213,NVRAM_EF_CLASSMARK_RACAP_LID,"1,2",byte5.gsm400_r_cap,byte5.gsm400_r_cap,OTA and OTA BY OP,no,no,no,no,indicates presence of GSM band GSM850 and GSM400's radio capability<BR><BR>[MCF]<BR>GSM400 Radio Capability<BR>bit 0:0:indicates no power class for GSM400<BR>bit 4:4:indicates power class 4 for GSM400,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x04",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8782,61213,NVRAM_EF_CLASSMARK_RACAP_LID,"1,2",byte6.gsm1900_r_cap,byte6.gsm1900_r_cap,OTA and OTA BY OP,no,no,no,no,"indicates presence of GSM band GSM1900, GSM1900 Capability and GSM850's radio capability<BR>[MCF]GSM1900 Radio Capability<BR>bit 0:0:indicates no power class for GSM1900<BR>bit 1:1:indicates power class 1 for GSM1900<BR>bit 2:2:indicates power class 2 for GSM1900",BIT,4,,4,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00-0x02:0x00:"indicates no power class for GSM1900";<BR>0x01:"indicates power class 1 for GSM1900";<BR>0x02:"indicates power class 2 for GSM1900";,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
-8783,61213,NVRAM_EF_CLASSMARK_RACAP_LID,"1,2",byte6.gsm850_r_cap,byte6.gsm850_r_cap,OTA and OTA BY OP,no,no,no,no,"indicates presence of GSM band GSM1900, GSM1900 Capability and GSM850's radio capability<BR>[MCF]GSM850 Radio Capability<BR>bit 0:0:indicates no power class for GSM850<BR>bit 4:4:indicates power class 4 for GSM850<BR>bit 5:5:indicates power class 5 for GSM850",BIT,3,,3,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x04, 0x05:0x00:"indicates no power class for GSM850"<BR>0x04:"indicates power class 4 for GSM850"<BR>0x05:"indicates power class 5 for GSM850"",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8783,61213,NVRAM_EF_CLASSMARK_RACAP_LID,"1,2",byte6.gsm850_r_cap,byte6.gsm850_r_cap,OTA and OTA BY OP,no,no,no,no,"indicates presence of GSM band GSM1900, GSM1900 Capability and GSM850's radio capability<BR>[MCF]GSM850 Radio Capability<BR>bit 0:0:indicates no power class for GSM850<BR>bit 4:4:indicates power class 4 for GSM850<BR>bit 5:5:indicates power class 5 for GSM850",BIT,3,,3,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x04, 0x05:0x00:"indicates no power class for GSM850"<BR>0x04:"indicates power class 4 for GSM850"<BR>0x05:"indicates power class 5 for GSM850"",,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
8784,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",always_report_remote_video_cap_support,ua_config.always_report_remote_video_cap_support,OTA and OTA BY OP,no,no,no,no,Always report remote support video if local can support<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"Test in machine (Y/N): No<BR>Test Time (minutes): 5<BR>[Init]<BR>MO VoLTE, MT CS<BR>[Test Step]<BR>1) MO make VoLTE Call to MT<BR>2) After call established, MO's vilte call botton is enabled<BR>3) tap vilte botton and check result<BR>[Expected Result]<BR>MO's vilte call botton shall be enabled, but upgrade will fail",Pass,,,,
8785,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",always_report_remote_video_cap_support.always_report_remote_video_cap_support,ua_config.always_report_remote_video_cap_support.always_report_remote_video_cap_support,Not Support,no,no,no,no,[MCF]<BR>Always report remote support video if local can support<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
8786,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",custom_em_ims_event_info,ua_config.custom_em_ims_event_info,OTA and OTA BY OP,no,no,no,no,To enable the EM for IMS Event Info collection<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"Test in machine (Y/N): No<BR>Test Time (minutes): 20<BR>[Init]<BR>MO/MT inv VoLTE<BR>[Test Step]<BR>1) MO/MT Registered VoLTE<BR>2) MO make volte call<BR>3) MT answer, then end call<BR>[Expected Result]<BR>DMF can collect the related IMS event information",Pass,,,,
@@ -8702,22 +8702,22 @@
8802,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",wans_xcap_pref_setting.pref,comm_ans_cfg.pref_cfg.wans_xcap_pref_setting.pref,OTA and OTA BY OP,no,no,no,no,[MCF]xcap APN WIFI offload setting.<BR><BR>bit 0:0:CELL ONLY<BR>bit 1:1:WLAN PREF<BR>bit 2:2:CELL PREF<BR>bit 3:3:WLAN ONLY<BR>bit 4:4:EPC PREF (LTE>WiFi>CS)<BR>bit 5:5:IMS CURRENT RAN PREF<BR>bit 15:15:refer to WFC UI,BIT,4,,4,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,0 ~ f,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"[Init]<BR>WiFi on, VoWiFi on<BR>[Test Step]<BR>Change WiFi calling prefer UI<BR>[Expected Result]<BR>XCAP PDN set up",Pass,,,,
8803,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",wans_xcap_pref_setting.wfo,comm_ans_cfg.pref_cfg.wans_xcap_pref_setting.wfo,OTA and OTA BY OP,no,no,no,no,[MCF]xcap APN WIFI offload setting.<BR>wfo capability<BR>bit 0:0:not refer to WFC UI<BR>bit 15:15:refer to WFC UI,BIT,4,,4,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or f,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,Test in machine (Y)<BR>Test Time (0.5)<BR>[Init]<BR>UI VoWiFi on<BR>[Test Step]<BR>UI VoWiFi off<BR>[Expected Result]<BR>XCAP PDN cannot set up,Pass,,,,
8804,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",wlan_trtl_enable.wlan_trtl_enable,comm_ans_cfg.trtl_cfg.wlan_trtl_enable.wlan_trtl_enable,OTA and OTA BY OP,no,no,no,no,"When enable, throttling handover back to WLAN for wlan_rove_in_trtl_time<BR>0:(bit 0 is functional enable bit) Disabled<BR>1:(bit 0 is functional enable bit) Enable for all throttling if no specify bit 1 ~ bit 7<BR>3:(bit 1 is enable for idle mode) IDLE mode throttling<BR>5:(bit 2 is enable for in-call mode) In-Call mode throttling<BR>7:Enable for both (IDLE and In-Call) throttling(raise both bit 1 and 2)",BIT,8,,8,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0a:"a = 0~f",,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"Test in machine (Y)<BR>Test Time (10)<BR>[Init]<BR>VoLTE on, VoWiFi on, IMS on VoLTE<BR>[Test Step]<BR>Move to LTE, move to WiFi, ..., repeatedly<BR>[Expected Result]<BR>Handover to VoWiFi needs minutes",Pass,,,,
-8805,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_4G5_HO_MRU_PARTIAL_CIPHER_ENABLE,modem_sbp_config[115].SBP_4G5_HO_MRU_PARTIAL_CIPHER_ENABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable partial ciphering for MRU after 4G5 HO<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-8806,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_AFR_REDUCE_23G_TO_5G_IF_POSSIBLE,modem_sbp_config[114].SBP_AFR_REDUCE_23G_TO_5G_IF_POSSIBLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>AFR path will be 23G->4G->5G if previous rat is 4G functionality is disabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8807,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_AFR_TO_5G_WITH_MORE_OPPORTUNITY,modem_sbp_config[114].SBP_AFR_TO_5G_WITH_MORE_OPPORTUNITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>AFR to 5G with another attempt from 4G to 5G is disabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8808,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_EMM_ALWAYS_SET_ACTIVE_FLAG_FALSE_FOR_AFR_TAU,modem_sbp_config[114].SBP_EMM_ALWAYS_SET_ACTIVE_FLAG_FALSE_FOR_AFR_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set active flag to false directly<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init] 2G/3G/4G/5G active<BR>[Test Step] The UE camps on 5G first but VoNR is not supported by NW. Dial a call, the NW should redirect the UE to LTE to continue the call. The call also fails to proceed in LTE, the UE falls back to 3G to proceed the call, the call is successfully performed in 3G. Upon the end of the call, the UE should return back to NR. The UE fails to redirect back to NR directly from 3G, redirect to LTE instead. The UE should perform a AFR TAU and the active flag should be set as 0 so that the NW would subjectively release RRC connection upon the end of TAU procedure. ERRC would use this RRCConnectionRelease as a way to redirect to NR.<BR>[Expected Result]<BR>The UE does not set active flag in AFR TAU.",Untested,,,,
-8809,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_EMM_RELEASE_RRC_CONNECTION_DIRECTLY_FOR_AFR_TO_NR,modem_sbp_config[114].SBP_EMM_RELEASE_RRC_CONNECTION_DIRECTLY_FOR_AFR_TO_NR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Release RRC connection directly for AFR<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]The UE camps on 5G first but VoNR is not supported by NW. Dial a call, the NW should redirect the UE to LTE to continue the call. The call also fails to proceed in LTE, the UE falls back to 3G to proceed the call, the call is successfully performed in 3G. Upon the end of the call, the UE should return back to NR. The UE fails to redirect back to NR directly from 3G, redirect to LTE instead. The UE should perform a AFR TAU and the active flag should be set as 0 so that the NW would subjectively release RRC connection upon the end of TAU procedure. ERRC would use this RRCConnectionRelease as a way to redirect to NR. However, if there's no RRC connection from the NW, EMM should release the connection directly after TAU.<BR>[Expected Result]EMM locally releases RRC connection after the TAU.",Untested,,,,
-8810,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_ENABLE_GAS_SLT_PLMN_UPDATE,modem_sbp_config[115].SBP_ENABLE_GAS_SLT_PLMN_UPDATE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>GAS replaces the Test machine PLMN with the PLMN in search req <BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0: SBP is OFF<BR>1: SBP is ON,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
-8811,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_ENDC_PREFER_SEARCH,modem_sbp_config[115].SBP_ENDC_PREFER_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LTE search prefer ENDC (NSA) cell<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:SIB2 receiving for ENDC prefer search is turn on<BR>0x00:SIB2 receiving for ENDC prefer search is turn off,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes): 10mins<BR>[Init]<BR>Prepare 1 NSA cell (RSSI:-80dBm), 1 LTE only cell (RSSI: -90dBm)<BR>[Test Step]<BR>Power on UE<BR>[Expected Result]<BR>UE should camp on NSA cell rather than LTE only cell.",Pass,,,,
-8812,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_GMSS_EPSFB_SEARCH_AFR,modem_sbp_config[114].SBP_GMSS_EPSFB_SEARCH_AFR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Search AFR for EPSFB and silent redial to 1x is turned on.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)N<BR>Test Time (minutes)1<BR>[Init] <BR>[Test Step] change SBP value and boot up<BR>[Expected Result] dump to check SBP,Untested,,,,
-8813,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_GMSS_MPSR_AFTER_SEARCH_AFR,modem_sbp_config[115].SBP_GMSS_MPSR_AFTER_SEARCH_AFR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Trigger MPSR immediately active RAT on C2K and search AFR is triggered is turned off.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
-8814,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_IGNORE_A5_4_SUPPORT_IN_SMC,modem_sbp_config[115].SBP_IGNORE_A5_4_SUPPORT_IN_SMC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore the A5/4 algorithm support information in Security Mode Command <BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8815,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_KOR_SKT_NULL_MSISDN_REG,modem_sbp_config[115].SBP_KOR_SKT_NULL_MSISDN_REG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do Not try to attach network if USIM has NULL MSISDN for SKT<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00 ~ 01:00: Disabled<BR>01: Enabled,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)N<BR>Test Time (minutes)10<BR>[Init] None activated KOR USIM<BR>[Test Step]<BR>1. Insert a none activated KOR USIM.<BR>2. Check if UE try to attach network<BR>3. Plug out the card<BR>4. Switch the UE in registration mode<BR>5. Insert a none activated KOR USIM<BR>6. Check if UE try to attach network<BR>[Expected Result]<BR>In step 2, UE should not try to attach network<BR>In step 6, UE try to attach network",Untested,,,,
-8816,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_LBS_OTDOA_INTER_FREQ_MEAS,modem_sbp_config[115].SBP_LBS_OTDOA_INTER_FREQ_MEAS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>OTDOA inter-frequency measurement capability support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
-8817,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_SIM_ARREARAGE,modem_sbp_config[115].SBP_SIM_ARREARAGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Support SIM arrearage detection<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Do not support SIM arrearage detection<BR>0x01:Support SIM arrearage detection,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8818,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[78].SBP_NR_CA_MAX_BW,modem_sbp_data_config[78].SBP_NR_CA_MAX_BW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Maximum aggregated NR CA bandwidth<BR>bit 10:10:100 MHz BW<BR>bit 20:20:200 MHz BW",BIT,8,,8,0x0a,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:not supported<BR>0x14:supported<BR>0xA:supported,,,N/A,MD Config,Modem - Customer Requirement,,,OTA,Pass,,,,
-8819,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[77].SBP_NR_CA_MAX_CC_NUM,modem_sbp_data_config[77].SBP_NR_CA_MAX_CC_NUM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Maximum number of supported NR CCs",BIT,8,,8,DEFAULT_VALUE : 1<BR>__NR_CA_DL_2CC__ : 2,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 1~2:In Gen97 the maximum CC number of NR CA is 2.,,,SBP_NR_CA shall be TRUE.,DL CA,DC_CA,,,"Set this SBP to 1 and check UE-NR-Capability, see if any 2CC band combination is reported.",Pass,,,,
-8820,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[76].SBP_POS_VZW_MODE,modem_sbp_data_config[76].SBP_POS_VZW_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>This SBP indicates which NW performs positioning.<BR>bit 0:0:Non-VzW network<BR>bit 1:1:VzW network",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0-non-Vzw <BR>1- Vzw,,,,(VzW) E911,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8805,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_4G5_HO_MRU_PARTIAL_CIPHER_ENABLE,modem_sbp_config[115].SBP_4G5_HO_MRU_PARTIAL_CIPHER_ENABLE,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, the MRU after 4G5 HO is partial ciphering protected. If not, the MRU is treated as a normal NAS message transmitted in <BR>conneced mode, i.e., intergrity protected and ciphered without NAS message container.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+8806,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_AFR_REDUCE_23G_TO_5G_IF_POSSIBLE,modem_sbp_config[114].SBP_AFR_REDUCE_23G_TO_5G_IF_POSSIBLE,OTA and OTA BY OP,no,no,no,yes,This SBP is used to decide AFR path as 23G->4G->5G if previous rat is 4G functionality.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,.,,,,,,Untested,,,,
+8807,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_AFR_TO_5G_WITH_MORE_OPPORTUNITY,modem_sbp_config[114].SBP_AFR_TO_5G_WITH_MORE_OPPORTUNITY,OTA and OTA BY OP,no,no,no,yes,"This SBP is used after 5G strict constrain AFR is failed, another AFR attempt will be made from 4G to 5G.<BR><BR>if SBP = false<BR>5G -> EPSFB -> 4G -> 3G CS call -> callEnd -> 3G5 AFR fail -> 3G4 AFR success -> 4G <BR><BR>if SBP = true<BR>5G -> EPSFB -> 4G -> 3G CS call -> callEnd -> 3G5 AFR fail -> 3G4 AFR success -> 4G -> 4G5 AFR success-> 5G",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,.,,,,,,Untested,,,,
+8808,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_EMM_ALWAYS_SET_ACTIVE_FLAG_FALSE_FOR_AFR_TAU,modem_sbp_config[114].SBP_EMM_ALWAYS_SET_ACTIVE_FLAG_FALSE_FOR_AFR_TAU,OTA and OTA BY OP,no,no,no,yes,This SBP is used to decide whether EMM shall always set active flag to false for AFR TAU,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init] 2G/3G/4G/5G active<BR>[Test Step] The UE camps on 5G first but VoNR is not supported by NW. Dial a call, the NW should redirect the UE to LTE to continue the call. The call also fails to proceed in LTE, the UE falls back to 3G to proceed the call, the call is successfully performed in 3G. Upon the end of the call, the UE should return back to NR. The UE fails to redirect back to NR directly from 3G, redirect to LTE instead. The UE should perform a AFR TAU and the active flag should be set as 0 so that the NW would subjectively release RRC connection upon the end of TAU procedure. ERRC would use this RRCConnectionRelease as a way to redirect to NR.<BR>[Expected Result]<BR>The UE does not set active flag in AFR TAU.",Pass,,,,
+8809,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_EMM_RELEASE_RRC_CONNECTION_DIRECTLY_FOR_AFR_TO_NR,modem_sbp_config[114].SBP_EMM_RELEASE_RRC_CONNECTION_DIRECTLY_FOR_AFR_TO_NR,OTA and OTA BY OP,no,no,no,yes,This SBP is used to decide whether EMM shall release RRC connection directly if it is a AFR-to-NR TAU,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]The UE camps on 5G first but VoNR is not supported by NW. Dial a call, the NW should redirect the UE to LTE to continue the call. The call also fails to proceed in LTE, the UE falls back to 3G to proceed the call, the call is successfully performed in 3G. Upon the end of the call, the UE should return back to NR. The UE fails to redirect back to NR directly from 3G, redirect to LTE instead. The UE should perform a AFR TAU and the active flag should be set as 0 so that the NW would subjectively release RRC connection upon the end of TAU procedure. ERRC would use this RRCConnectionRelease as a way to redirect to NR. However, if there's no RRC connection from the NW, EMM should release the connection directly after TAU.<BR>[Expected Result]EMM locally releases RRC connection after the TAU.",Pass,,,,
+8810,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_ENABLE_GAS_SLT_PLMN_UPDATE,modem_sbp_config[115].SBP_ENABLE_GAS_SLT_PLMN_UPDATE,OTA and OTA BY OP,no,no,no,yes,"In earlier branches the plmn id requested in 2G PLMN_SEARCH_REQ was 46xxx but the PLMN read in SI3 of the TEST MACHINE is always 00101.<BR>In order to prevent the search failure, GAS completes the search by over-writing the SI3 plmn with the requested target plmn 46xxx.<BR>(i.e SYS_INFO_IND and PLMN_SEARCH_CNF was sent with the requested target plmn though there is a mismatch with the PLMN in SI3)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0: SBP is OFF<BR>1: SBP is ON,,,SLT GAS SLT changes are guarded by the flag __IC_SLT__,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Untested,,,,
+8811,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_ENDC_PREFER_SEARCH,modem_sbp_config[115].SBP_ENDC_PREFER_SEARCH,OTA and OTA BY OP,no,no,no,yes,4G prefer to search ENDC (NSA) cell,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:SIB2 receiving for ENDC prefer search is turn on<BR>0x00:SIB2 receiving for ENDC prefer search is turn off,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes): 10mins<BR>[Init]<BR>Prepare 1 NSA cell (RSSI:-80dBm), 1 LTE only cell (RSSI: -90dBm)<BR>[Test Step]<BR>Power on UE<BR>[Expected Result]<BR>UE should camp on NSA cell rather than LTE only cell.",Pass,,,,
+8812,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[114].SBP_GMSS_EPSFB_SEARCH_AFR,modem_sbp_config[114].SBP_GMSS_EPSFB_SEARCH_AFR,OTA and OTA BY OP,no,no,no,yes,GMSS will trigger AFR search when EPSFB is finished and silent redial to C2K,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)N<BR>Test Time (minutes)1<BR>[Init] <BR>[Test Step] change SBP value and boot up<BR>[Expected Result] dump to check SBP,Untested,,,,
+8813,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_GMSS_MPSR_AFTER_SEARCH_AFR,modem_sbp_config[115].SBP_GMSS_MPSR_AFTER_SEARCH_AFR,OTA and OTA BY OP,no,no,no,yes,GMSS will trigger MPSR immediately when active RAT on C2K and search AFR is triggered.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,This SBP can be controlled by compile option __GMSS_MPSR_AFTER_SEARCH_AFR__,MD Config,Modem - Customer Requirement,,,"After OTA, query SBP if changed",Pass,,,,
+8814,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_IGNORE_A5_4_SUPPORT_IN_SMC,modem_sbp_config[115].SBP_IGNORE_A5_4_SUPPORT_IN_SMC,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled RRCE shall ignore the A5/4 algorithm support information in Security Mode Command.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,If __ENABLE_IGNORE_A5_4_SUPPORT_IN_SMC__ is defined it would be enabled; otherwise the enhancement is disabled by default.,,,,,,Untested,,,,
+8815,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_KOR_SKT_NULL_MSISDN_REG,modem_sbp_config[115].SBP_KOR_SKT_NULL_MSISDN_REG,OTA and OTA BY OP,no,no,no,yes,"If inserted USIM card has NULL MSISDN with registration mode, UE will not try to attach request to network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00 ~ 01:00: Disabled<BR>01: Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)N<BR>Test Time (minutes)10<BR>[Init] None activated KOR USIM<BR>[Test Step]<BR>1. Insert a none activated KOR USIM.<BR>2. Check if UE try to attach network<BR>3. Plug out the card<BR>4. Switch the UE in registration mode<BR>5. Insert a none activated KOR USIM<BR>6. Check if UE try to attach network<BR>[Expected Result]<BR>In step 2, UE should not try to attach network<BR>In step 6, UE try to attach network",Pass,,,,
+8816,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_LBS_OTDOA_INTER_FREQ_MEAS,modem_sbp_config[115].SBP_LBS_OTDOA_INTER_FREQ_MEAS,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to enable/disable the feature of OTDOA inter-frequency measurement accoring to the section 6.5.1.2 of 3GPP spec.<BR>If the feature is enabled, it means the target device is capable of supporting inter-frequency RSTD measurement<BR>(as indicated by the presence of the IE interFreqRSTDmeasurement in OTDOA-ProvideCapabilities).",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,This SBP can be controlled by compile option __LTE_OTDOA_SUPPORT__,LCS for LTE and EPS - LTE (AGPS Control Plane) UMTS and GSM Features - LCS (AGPS Control Plane),4G,,,covered by SBP framework,Pass,,,,
+8817,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[115].SBP_SIM_ARREARAGE,modem_sbp_config[115].SBP_SIM_ARREARAGE,OTA and OTA BY OP,no,no,no,yes,Feature to report URC when SIM arrearage is detected,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:Do not support SIM arrearage detection<BR>0x01:Support SIM arrearage detection,,,This feature is controlled by __DISABLE_SIM_ARREARAGE__ flag,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8818,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[78].SBP_NR_CA_MAX_BW,modem_sbp_data_config[78].SBP_NR_CA_MAX_BW,OTA and OTA BY OP,no,no,no,yes,This SBP defines the maximum aggregated NR CA bandwidth for NR FR2,BIT,8,,8,0x0a,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0:not supported<BR>0x14:supported<BR>0xA:supported,,,N/A,MD Config,Modem - Customer Requirement,,,OTA,Pass,,,,
+8819,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[77].SBP_NR_CA_MAX_CC_NUM,modem_sbp_data_config[77].SBP_NR_CA_MAX_CC_NUM,OTA and OTA BY OP,no,no,no,yes,This SBP defines the maximum number of supported NR CCs.,BIT,8,,8,DEFAULT_VALUE : 1<BR>__NR_CA_DL_2CC__ : 2,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 1~2:In Gen97 the maximum CC number of NR CA is 2.,,,N/A,DL CA,DC_CA,,,"Set this SBP to 1 and check UE-NR-Capability, see if any 2CC band combination is reported.",Pass,,,,
+8820,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[76].SBP_POS_VZW_MODE,modem_sbp_data_config[76].SBP_POS_VZW_MODE,OTA and OTA BY OP,no,no,no,yes,This SBP indicates which NW performs positioning.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0-non-Vzw <BR>1- Vzw,,,N/A,(VzW) E911,OP Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
8821,21,NVRAM_EF_UMTS_A54_SMC_IGNR_LID,"1,2",mcc1,whitelist_PLMN[0~15].mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x06,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
8822,21,NVRAM_EF_UMTS_A54_SMC_IGNR_LID,"1,2",mcc2,whitelist_PLMN[0~15].mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
8823,21,NVRAM_EF_UMTS_A54_SMC_IGNR_LID,"1,2",mcc3,whitelist_PLMN[0~15].mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x07,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -8757,43 +8757,43 @@
8858,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_update_retry_upper_limit,ua_config.mo_update_retry_upper_limit,OTA and OTA BY OP,no,no,no,no,"This is the upper limit for UPDATE retry times if continously received 500 Server Internal Err during MO call establishment<BR>If less than 0, means no upper limit<BR>If equal or bigger than 0, means UA will retry UPDATE at most X times (X is the configured value)<BR>",INT,4,,,0xFFFFFFFF,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine<BR>[Init] IMS Register on 4G<BR>[Test Step]<BR>1) make mo call<BR>2) ss side always reply 500 for UPDATE sent from UE during mo call establishment<BR>[Expected Result]<BR>UE cancel call after retry UPDATE for x times (x equal to the configuration value),Pass,,,,
8859,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_if_488_no_sdp,ua_config.retry_ims_voice_if_488_no_sdp,OTA and OTA BY OP,no,no,no,no,"When making a MO video call and receive 488 without SDP, retry IMS voice directly by IMS UA<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Test in machine<BR>[Init] IMS Register on 4G<BR>[Test Step]<BR>1) make mo video call<BR>2) ss side reply 488 without sdp<BR>[Expected Result]<BR>UE will automatically retry mo voice call,Pass,,,,
8860,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_if_488_no_sdp.retry_ims_voice_if_488_no_sdp,ua_config.retry_ims_voice_if_488_no_sdp.retry_ims_voice_if_488_no_sdp,Not Support,no,no,no,no,"[MCF]<BR>When making a MO video call and receive 488 without SDP, retry IMS voice directly by IMS UA<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
-8861,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>2G PLMN list speed mode enhancement<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0:2G PLMN list speed mode enhancement OFF<BR>1:2G PLMN list speed mode enhancement ON,,,,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-8862,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_C2K_MOBTERMMAP_SVC_PROTECT,modem_sbp_config[117].SBP_C2K_MOBTERMMAP_SVC_PROTECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use the MobTermMaps in UIM.<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_CONSIDER_NON_DATA_SIM_LOCAL_REL_TAU_AS_RECOVERY_TAU,modem_sbp_config[117].SBP_CONSIDER_NON_DATA_SIM_LOCAL_REL_TAU_AS_RECOVERY_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Consider local release TAU as sync recovery TAU on non-Data SIM.<BR>bit 0:0:Disabled. Local release TAU not same as sync recovery TAU.<BR>bit 1:1:Enabled. Local release TAU is same as sync recovery TAU.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8864,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_CTCH_OVER_PLMN_ENABLED,modem_sbp_config[118].SBP_CTCH_OVER_PLMN_ENABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>not enable the function to check if ctch preffered over plmn.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Enabled<BR>1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Test in machine : Y<BR>Test Time : 10 mins<BR>[Init] SINGLE SIM case with 3G as active RAT<BR>[Test Step] 1.Set up CBS with periodicity small (eg:4)<BR> 2.Switch OFF and switch ON 'Automatically Select network' option in Network <BR> settings<BR> 3.Using NVRAM enable and disable SBP to check the result<BR>[Expected Result] If enabled PLMN will be completed in the expected duration,Untested,,,,
-8865,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_DISABLE_AUTO_BANDS_FOR_MANUAL_PLMN_LIST,modem_sbp_config[118].SBP_DISABLE_AUTO_BANDS_FOR_MANUAL_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>During manual plmn list freq scan will be performed based on auto bands<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_DISPLAY_AND_DELETE_CUSTOM_FPLMN,modem_sbp_config[117].SBP_DISPLAY_AND_DELETE_CUSTOM_FPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Display forbidden in PLMN_LIST menu, and delete custom_fplmn once registers on fplmn successfully<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: SBP off<BR>1: SBP on,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (minutes) 0 <BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-8867,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_DUAL_LTE_AIR_SIM_DETACH,modem_sbp_config[116].SBP_DUAL_LTE_AIR_SIM_DETACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform SIM detach over the air on both protocol stacks<BR>bit 0:0:Local detach for SIM detach<BR>bit 1:1:Perform SIM detach over the air",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_DUAL_LTE_AIR_SIM_DETACH<BR>[Test Step]<BR>After dual SIMs attached 4G successfully, and plug out SIM cards at the same time.<BR>[Expected Result]<BR>Both SIMs would send detach request.",Untested,,,,
-8868,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_ECC_CSFB_ENHANCEMENT,modem_sbp_config[117].SBP_ECC_CSFB_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Turn on ecc csfb enhancement capability<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"not support MCF, not need to do test for MCF",Untested,,,,
-8869,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_ECC_IMSI_MCC_LIST,modem_sbp_config[118].SBP_ECC_IMSI_MCC_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>ECC IMSI MCC List <BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE perform ECC call after SIM invalid for CS<BR>0:UE will not perform ECC call once SIM invalid for CS,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)Y<BR>Test Time (minutes) 10 mins <BR>[Init] Perform ECC call<BR>[Test Step] Perfrom registration request ,Network reject which makes SIM invalid. <BR>[Expected Result] UE perform ECC call with IMSI",Pass,,,,
-8870,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_IMS_SUPPORT_IRAT_SET_ACTIVE_FLAG,modem_sbp_config[116].SBP_IMS_SUPPORT_IRAT_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE will set the 'active' flag in the TAU request after IRAT from 2/3G to 4G<BR>bit 0:0:Disabled. UE will not set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G if IMS support.<BR>bit 1:1:Enabled. UE will set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G if IMS support",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: Disable. <BR>1: Enabled.,,,__SBP_IMS_SUPPORT_IRAT_SET_ACTIVE_FLAG__,D-SBP,SBP,,,NA,Pass,,,,
-8871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_LTE_ENHANCED_PRIORITY_BAND,modem_sbp_config[117].SBP_LTE_ENHANCED_PRIORITY_BAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable enhanced priority band for LTE<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0x00: Disable<BR>0x01: Enable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (30minutes)<BR>[Init] 1. Set cell A band X, cell B band Y, cell C band Z. 2. Set NVRAM priority band X=Y>Z for testing operator. 3. Set cell A, B, C freq as predefined freq in NVRAM. 4. Set cell power cell C>B>A.<BR>[Test Step] After 3 cells enabled, power on UE.<BR>[Expected Result] First camp on cell B.",Untested,,,,
-8872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_NFC_GET_RESPONSE_WHEN_WARNING_SW,modem_sbp_config[116].SBP_NFC_GET_RESPONSE_WHEN_WARNING_SW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>configure modem to issue GET RESPONSE for NFC<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,Subscriber Identity Module (Release 4),2G,,,,Untested,,,,
-8873,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_NOT_APPEND_EPLMN_WHEN_RAT_MODE_CHANGE,modem_sbp_config[117].SBP_NOT_APPEND_EPLMN_WHEN_RAT_MODE_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not append equivalent PLMNs to RPLMN search after user triggers RAT mode change<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: SBP off<BR>1: SBP on,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8874,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_NVRAM_MAP_DETACH_TO_REATTACH_REQUIRED,modem_sbp_config[116].SBP_NVRAM_MAP_DETACH_TO_REATTACH_REQUIRED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Map LTE NW detach to reattach required by NVRAM<BR>bit 0:0:Disable. Follow spec reject cause handling<BR>bit 1:1:Enable. map with NVRAM setting",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_NVRAM_MAP_DETACH_TO_REATTACH_REQUIRED<BR>[Test Step]<BR>UE received network detach request(REATTACH_NOT_REQUIRED) with EMM cause #40.<BR>[Expected Result]<BR>UE behaves as receiving network detach request(REATTACH_REQUIRED).,Untested,,,,
-8875,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_PRELIMINARY_FTAI_LIST,modem_sbp_config[116].SBP_PRELIMINARY_FTAI_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Add TAI to preliminary list before add to spec FTAI list<BR>bit 0:0:Not add<BR>bit 1:1:Add",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_REPORTING_MODE_FOR_ETXPWRSTUS,modem_sbp_config[118].SBP_REPORTING_MODE_FOR_ETXPWRSTUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Default reporting mode for +ETXPWRSTUS<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8877,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_SAT_MANUAL_VERIFY_IN_REFRESH_RESET,modem_sbp_config[116].SBP_SAT_MANUAL_VERIFY_IN_REFRESH_RESET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>enable manual verify PIN during REFRESH RESET<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:auto verify PIN during REFRESH RESET<BR>1:manual verify PIN during REFRESH RESET,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_SAT_SETUP_CALL_WITH_SS_STR,modem_sbp_config[116].SBP_SAT_SETUP_CALL_WITH_SS_STR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform SS/USSD operation if SS/USSD string is received in SETUP CALL<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8879,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_SEND_POLL_ON_VRB_SHORTAGE,modem_sbp_config[118].SBP_SEND_POLL_ON_VRB_SHORTAGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To Enable the feature of Poll sending, based on VRB status<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~1:This SBP is used to trigger sending of POLL when VRB FULL, to avoid stall.",,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8880,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_SKIP_EMC_REJECT_WHEN_EMC_BS_FALSE_SIB_SUPPORT_IMS_EMC,modem_sbp_config[116].SBP_SKIP_EMC_REJECT_WHEN_EMC_BS_FALSE_SIB_SUPPORT_IMS_EMC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not send EMC_ATTACH_REJ or EMC_DATA_FAIL_IND when EMC_BS not supported, but cell support IMS EMC.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8881,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_STORE_MEID_ESN_ERROR,modem_sbp_config[118].SBP_STORE_MEID_ESN_ERROR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Only try once when store esn command fail for special card is turned off.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:only try store esn once,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]using a card which can't store esn successfully<BR>[Test Step]insert card and boot up phone<BR>[Expected Result]phone boot up and register to network normally,Untested,,,,
-8882,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>allow TCM request authentication even when username or password is empty<BR>bit 0:0:not allow<BR>bit 1:1:allow",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:allow for TCM to request authentication even when username or password is empty<BR>0:not allow for TCM to request authentication even when username or password is empty,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (5 minutes)<BR>[Init]<BR>[Test Step] using cgauth to set null username/password<BR>[Expected Result] check when value is 0, UE won't requset PAP or CHAP, if 1, requset",Pass,,,,
-8883,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_USE_SUGGESTED_RACH_BAR_PARA,modem_sbp_config[117].SBP_USE_SUGGESTED_RACH_BAR_PARA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Turn on to enable overwrite RACH bar parameter for testSIM or FTA<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1:Turn on to enable overwrite RACH bar parameter for testSIM or FTA<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,LTE Protocol (R9 Baseline),4G,,,,Untested,,,,
-8884,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[80].SBP_DATA_HPPLMN_SEARCH_TIMER,modem_sbp_data_config[80].SBP_DATA_HPPLMN_SEARCH_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>higher-priority PLMN search timer value<BR>bit 1:1:1 minutes<BR>bit 2:2:2 minutes<BR>bit 3:3:3 minutes<BR>bit 4:4:4 minutes<BR>bit 5:5:5 minutes<BR>bit 6:6:6 minutes<BR>bit 7:7:7 minutes<BR>bit 8:8:8 minutes<BR>bit 9:9:9 minutes<BR>bit 10:10:10 minutes<BR>bit 11:11:11 minutes<BR>bit 12:12:12 minutes<BR>bit 13:13:13 minutes<BR>bit 14:14:14 minutes<BR>bit 15:15:15 minutes<BR>bit 16:16:16 minutes<BR>bit 17:17:17 minutes<BR>bit 18:18:18 minutes<BR>bit 19:19:19 minutes<BR>bit 20:20:20 minutes<BR>bit 21:21:21 minutes<BR>bit 22:22:22 minutes<BR>bit 23:23:23 minutes<BR>bit 24:24:24 minutes<BR>bit 25:25:25 minutes<BR>bit 26:26:26 minutes<BR>bit 27:27:27 minutes<BR>bit 28:28:28 minutes<BR>bit 29:29:29 minutes<BR>bit 30:30:30 minutes<BR>bit 255:255:255 minutes",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1~255:minutes,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-8885,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[84].SBP_EMM_R15_SET_RAT_NO_DETACH_BY_LIST,modem_sbp_data_config[84].SBP_EMM_R15_SET_RAT_NO_DETACH_BY_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>decide the list for detach-required detection in SET_RAT procedure<BR>bit 0:0:the default EMM_RATBAND_DETACH_ALGORM_1<BR>bit 1:1:if old/new_rat_mode includes LTE, perform detach by refering to balcklist.<BR>bit 2:2:if old/new_rat_mode includes LTE, NOT perform detach by refering to whitelist.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"2:if old/new_rat_mode setting includes LTE, NOT perform detach by referring to white list<BR>0:disable whitelist/blacklist, the detach algo is EMM_RATBAND_DETACH_ALGORM_1<BR>1:if old/new_rat_mode setting includes LTE, perform detach by referring to blacklist",,,,MD Config,Modem - Customer Requirement,,,SET RAT procedure,Pass,,,,
-8886,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[81].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_COUNT,modem_sbp_data_config[81].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_COUNT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>SBP controls GPRS reattach counter after network initiated detach.",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This SBP Data feature will be available only when SBP SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE is enabled.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N):Y<BR>Test Time (minutes) 5 MIN<BR>[Init] DUT boot up <BR>[Test Step]Detach request by Network with cause other than 2,8,3,6,7,11,12,13,14,15,25 with reattach not required along with SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE enabled<BR>[Expected Result] observe how many times UR triggers GMM attach",Pass,,,,
-8887,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[82].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_GUARD_TIMER_VALUE,modem_sbp_data_config[82].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_GUARD_TIMER_VALUE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>SBP controls the guard timer value by SBP_ID.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This SBP Data feature will be available only when SBP SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE is enabled.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N):Y<BR>Test Time (minutes) 5 MIN<BR>[Init] DUT boot up <BR>[Test Step]Detach request by Network with cause other than 2,8,3,6,7,11,12,13,14,15,25 with reattach not required along with SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE enabled<BR>[Expected Result] observe how many times UR triggers GMM attach",Pass,,,,
-8888,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[83].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE,modem_sbp_data_config[83].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>HPLMN rej 14 eutran disable timer value, N means N minutes while 0 means that this configuration is disabled.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable this configuration<BR>1~255:minutes,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
-8889,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[79].SBP_MCF_CB_CONTROL_SWITCH,modem_sbp_data_config[79].SBP_MCF_CB_CONTROL_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>CB settings for different RATS",BIT,8,,8,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8890,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit1,nvram_sim_profile[35].bit1,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>Data Connection Status Change Event support - PDU Connection<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8891,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit2,nvram_sim_profile[35].bit2,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>Event: Network Rejection for NG-RAN<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8892,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit3,nvram_sim_profile[35].bit3,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>Non-IP Data Delivery support (if class e and class ai are supported)<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8893,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit4,nvram_sim_profile[34].bit4,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>REFRESH with Application Update mode (i.e. class af is supported)<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8894,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit4to8,nvram_sim_profile[35].bit4to8,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>RFU,BIT,5,,5,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8895,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit5to8,nvram_sim_profile[34].bit5to8,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>RFU,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8896,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_ENABLE_BMVNO_SIMME_LOCK_CONFIG,modem_sbp_config[118].SBP_ENABLE_BMVNO_SIMME_LOCK_CONFIG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Consider the listed Boost and Sprint Nws as whitelist<BR>bit 0:0:Disabled. BMVNO SIMME lock configuration.<BR>bit 1:1:Enabled. BMVNO SIMME lock configuration.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-8897,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_L2_SET_CTCH_IS_DROP_ALL_ZERO_SDUS,modem_sbp_config[119].SBP_L2_SET_CTCH_IS_DROP_ALL_ZERO_SDUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Drop all zero SDUs in case CTCH channel configured<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Valid value is 1,,,,WCDMA Protocol (R8 Baseline),3G,,,,Untested,,,,
+8861,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,modem_sbp_config[118].SBP_2G_PLMN_LIST_SPEED_MODE_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,Include every common ARFCN in both previous speed mode stored result and current power scan result<BR>whose rssi is > -108dbm at the beginning of the current sorted power scan result.<BR>This will prevent loosing a stored speed mode result in the current round which would have otherwise been <BR>skipped as it was beyond the top 100 cells though rssi was > -108dbm.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0:2G PLMN list speed mode enhancement OFF<BR>1:2G PLMN list speed mode enhancement ON,,,If __DISABLE_GAS_LIST_SPEED_MODE_ENHANCEMENT__ is defined it would be disabled; otherwise the enhancement is enabled by default.,MD Config,Modem - Customer Requirement,,,"Use new MCF tool to generate new OTA files:<BR>Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>Replace new MCF EM mode & enable it<BR>Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+8862,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_C2K_MOBTERMMAP_SVC_PROTECT,modem_sbp_config[117].SBP_C2K_MOBTERMMAP_SVC_PROTECT,OTA and OTA BY OP,no,no,no,yes,"This SBP is to protect C2K service when MobTermMaps in UIM is disabled.<BR>If the MobTermMaps in UIM is disabled, enable this SBP, C2K uses this value with enabled.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,"If compile option __C2K_MOBTERMMAPS_SVC_PROTECT__ is defined, the SBP is default enable.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_CONSIDER_NON_DATA_SIM_LOCAL_REL_TAU_AS_RECOVERY_TAU,modem_sbp_config[117].SBP_CONSIDER_NON_DATA_SIM_LOCAL_REL_TAU_AS_RECOVERY_TAU,OTA and OTA BY OP,no,no,no,yes,"When local release TAU is done on non-Data SIM, under this SBP it will be considered as recovery sync TAU<BR>and nasRecoveryCount is incremented in this case.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __CONSIDER_NON_DATA_SIM_LOCAL_REL_TAU_AS_RECOVERY_TAU__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+8864,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_CTCH_OVER_PLMN_ENABLED,modem_sbp_config[118].SBP_CTCH_OVER_PLMN_ENABLED,OTA and OTA BY OP,no,no,no,yes,To enable the function to check if ctch preffered over plmn.,BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Enabled<BR>1:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine : Y<BR>Test Time : 10 mins<BR>[Init] SINGLE SIM case with 3G as active RAT<BR>[Test Step] 1.Set up CBS with periodicity small (eg:4)<BR> 2.Switch OFF and switch ON 'Automatically Select network' option in Network <BR> settings<BR> 3.Using NVRAM enable and disable SBP to check the result<BR>[Expected Result] If enabled PLMN will be completed in the expected duration,Pass,,,,
+8865,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_DISABLE_AUTO_BANDS_FOR_MANUAL_PLMN_LIST,modem_sbp_config[118].SBP_DISABLE_AUTO_BANDS_FOR_MANUAL_PLMN_LIST,OTA and OTA BY OP,no,no,no,yes,Optimization is to perform plmn list on all supported bands instead of MCC bands.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"To enable this feature, compile option __DISABLE_AUTO_BANDS_FOR_MANUAL_PLMN_LIST__ must be defined",,,,,,Untested,,,,
+8866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_DISPLAY_AND_DELETE_CUSTOM_FPLMN,modem_sbp_config[117].SBP_DISPLAY_AND_DELETE_CUSTOM_FPLMN,OTA and OTA BY OP,no,no,no,yes,"If turn on this SBP, PLMNs which is in custom_fplmn list will show forbidden on PLMN_LIST menu. And if UE registers on custom_fplmn successfully, that PLMN will be removed from custom_fplmn list. If this SBP is off, custom_fplmn will not show forbidden in PLMN_LIST menu. Also, UE will not detele PLMNs, which is registered successfully, from custom_fplmn list.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: SBP off<BR>1: SBP on,,,This SBP can be controlled by compile option __DISPLAY_AND_DELETE_CUSTOM_FPLMN__,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (minutes) 0 <BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+8867,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_DUAL_LTE_AIR_SIM_DETACH,modem_sbp_config[116].SBP_DUAL_LTE_AIR_SIM_DETACH,OTA and OTA BY OP,no,no,no,yes,"In MTK's current design, if peer SIM has higher or some priority event ongoing, current SIM will perform detach due to SIM removal locally to accelerate the procedure. This design will make UE only perform detach over the air only on one protocol stack when both SIMs are plugged out at the same time. Some operator requires dual SIM device to perform detach for SIM removal on both protocol stacks over the air. This SBP provides the option to control whether perform SIM detach over the air on both protocol stacks for dual LTE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,"If compile option __DUAL_LTE_AIR_SIM_DETACH__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_DUAL_LTE_AIR_SIM_DETACH<BR>[Test Step]<BR>After dual SIMs attached 4G successfully, and plug out SIM cards at the same time.<BR>[Expected Result]<BR>Both SIMs would send detach request.",Pass,,,,
+8868,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_ECC_CSFB_ENHANCEMENT,modem_sbp_config[117].SBP_ECC_CSFB_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"Turn on ecc csfb enhancement capability. if ecc csfb enhancement enabled, when CSFB for ECC, MS will skip the cell which does not support ECC call. if target cell supporting ECC does not meet suitable cell criteria due to PLMN & LA, camp on the cell as acceptable cell.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature can be enabled by __ECC_CSFB_ENHANCEMENT__,,,,,"not support MCF, not need to do test for MCF",Untested,,,,
+8869,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_ECC_IMSI_MCC_LIST,modem_sbp_config[118].SBP_ECC_IMSI_MCC_LIST,OTA and OTA BY OP,no,no,no,yes,"When SIM is not valid, UE still need to use IMSI as mobile identity in CM SERVICE REQ for Emergency services. This feature is applied only for the PLMNs specified in NVRAM_EF_MM_ECC_IMSI_MCC_LIST_LID list.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:UE perform ECC call after SIM invalid for CS<BR>0:UE will not perform ECC call once SIM invalid for CS,,,"if compile option __SBP_ECC_IMSI_MCC_LIST__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)Y<BR>Test Time (minutes) 10 mins <BR>[Init] Perform ECC call<BR>[Test Step] Perfrom registration request ,Network reject which makes SIM invalid. <BR>[Expected Result] UE perform ECC call with IMSI",Pass,,,,
+8870,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_IMS_SUPPORT_IRAT_SET_ACTIVE_FLAG,modem_sbp_config[116].SBP_IMS_SUPPORT_IRAT_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"When UE redirect / cell reselection / cell change order from 2/3G to 4G in CU network, if UE want to establish IMS PDN from idle, network will not response it.<BR>This SBP is for UE to set the 'active' flag in the TAU request when TAU is triggered by redirect / cell reselection / cell change order from 2/3G to 4G if IMS support. If we establish IMS PDN from connected, network will response it.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: Disable. <BR>1: Enabled.,,,User could use compile option __SBP_IMS_SUPPORT_IRAT_SET_ACTIVE_FLAG__ to switch the setting of this SBP.,D-SBP,SBP,,,NA,Pass,,,,
+8871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_LTE_ENHANCED_PRIORITY_BAND,modem_sbp_config[117].SBP_LTE_ENHANCED_PRIORITY_BAND,OTA and OTA BY OP,no,no,no,yes,This feature allows user to set LTE priority bands with priority levels for specific PLMNs. <BR>UE would prioritize these bands by their priority levels during band search.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0x00: Disable<BR>0x01: Enable,,,User could use compile option __LTE_ENHANCED_PRIORITY_BAND__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (30minutes)<BR>[Init] 1. Set cell A band X, cell B band Y, cell C band Z. 2. Set NVRAM priority band X=Y>Z for testing operator. 3. Set cell A, B, C freq as predefined freq in NVRAM. 4. Set cell power cell C>B>A.<BR>[Test Step] After 3 cells enabled, power on UE.<BR>[Expected Result] First camp on cell B.",Untested,,,,
+8872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_NFC_GET_RESPONSE_WHEN_WARNING_SW,modem_sbp_config[116].SBP_NFC_GET_RESPONSE_WHEN_WARNING_SW,OTA and OTA BY OP,no,no,no,yes,"This feature is sused to configure modem to issue GET RESPONSE for NFC commmands.<BR>THis feature is applicable only for the commands initiated by NFC through AT+CGLA .<BR>When feature is disabled and SIM card returns warning status words 62XX or 63XX, modem will not issue<BR>GET RESPONSE TO retrive the available data <BR>When feature is enabled and SIM card returns warning status words 62XX or 63XX, modem will issue<BR>GET RESPONSE TO retrive the available data",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,Subscriber Identity Module (Release 4),2G,,,,Untested,,,,
+8873,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_NOT_APPEND_EPLMN_WHEN_RAT_MODE_CHANGE,modem_sbp_config[117].SBP_NOT_APPEND_EPLMN_WHEN_RAT_MODE_CHANGE,OTA and OTA BY OP,no,no,no,yes,"Customer requests that after user triggers RAT mode change, UE should search RPLMN only and thus would not camp on PLMNs of other operators.<BR>To fulfill this requirement, we add this SBP to exclude EPLMNs in the 1st search round after UE RAT mode is changed.<BR>If the SBP is off, UE would add equivalent PLMNs to RPLMN search regardless RAT mode change.<BR>If the SBP is on, UE would not append equivalent PLMNs to RPLMN search after user triggers RAT mode change.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: SBP off<BR>1: SBP on,,,"if compile option __NOT_APPEND_EPLMN_WHEN_RAT_MODE_CHANGE__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Pass,,,,
+8874,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_NVRAM_MAP_DETACH_TO_REATTACH_REQUIRED,modem_sbp_config[116].SBP_NVRAM_MAP_DETACH_TO_REATTACH_REQUIRED,OTA and OTA BY OP,no,no,no,yes,"This feature is to let user map the received network detach request(REATTACH_NOT_REQUIRED) to detach request(REATTACH_REQUIRED), so that better user experience can be achieved in the case that network kept gives detach request abnormally. For example, when UE received network detach request(REATTACH_NOT_REQUIRED) with EMM cause #40, user does not want UE to detach and wait timer T3402 expire but behave like receiving network detach request(REATTACH_REQUIRED) Then, user can enable this SBP and modify NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID to specify that network detach request(REATTACH_NOT_REQUIRED) with EMM cause #40 should be mapped to network detach request (REATTACH_REQUIRED). One more reminder is that this feature is only applied in real network and not applied if inserting test sim. Verifying every reject cause behavior is very common for IOT or GCF cases. To prevent the IOT/GCF cases failure, MTK will keep following the spec behavior if inserting test sim.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,User could use compile option __NVRAM_MAP_DETACH_TO_REATTACH_REQUIRED__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_NVRAM_MAP_DETACH_TO_REATTACH_REQUIRED<BR>[Test Step]<BR>UE received network detach request(REATTACH_NOT_REQUIRED) with EMM cause #40.<BR>[Expected Result]<BR>UE behaves as receiving network detach request(REATTACH_REQUIRED).,Pass,,,,
+8875,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_PRELIMINARY_FTAI_LIST,modem_sbp_config[116].SBP_PRELIMINARY_FTAI_LIST,OTA and OTA BY OP,no,no,no,yes,"As specified in TS24.301, the tracking area(TAI) that UE currently in will be added to the <BR>list of forbidden tracking area(FTAI list) when reject cause #15 is received. This is a<BR>constraint to avoid UE selects a TAI too frequent if not successful. However, the default<BR>timer length(spec: 12~24 hours, MTK default: 12 hours) to reset FTAI list could be too<BR>long if the reject cause is due to temporary network issue. One may customize this timer<BR>to let FTAI list clear soon, but it will applies to all FTAI. To differentiate the handling <BR>of forbidden time on FTAI that receives different times of reject, this SBP introduce a <BR>mechanism to forbid TAI with different timer length. One can configure the timer setting<BR>in NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID. For example, if T1, T2, T3 are configured for<BR>preliminary FTAI list, a TAI can be forbid with T1 in first reject, T2 in second reject,<BR>and T3 in third reject before it is added to spec FTAI list. Currently, the only applies <BR>to the most common cause #15.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,User could use compile option __ENABLE_PRELIMINARY_FTAI_LIST__ to enable this SBP.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+8876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_REPORTING_MODE_FOR_ETXPWRSTUS,modem_sbp_config[118].SBP_REPORTING_MODE_FOR_ETXPWRSTUS,OTA and OTA BY OP,no,no,no,yes,Reporting mode for +ETXPWRSTUS URC.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+8877,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_SAT_MANUAL_VERIFY_IN_REFRESH_RESET,modem_sbp_config[116].SBP_SAT_MANUAL_VERIFY_IN_REFRESH_RESET,OTA and OTA BY OP,no,no,no,yes,"This SBP describes whether to enable manual verify PIN during REFRESH RESET.<BR>If this feature is enabled, User have to do manual PIN verify while in REFRESH reset<BR>If this feature is disabled,Modem will auto verify the PIN while in REFRESH reset",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:auto verify PIN during REFRESH RESET<BR>1:manual verify PIN during REFRESH RESET,,,N/A,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_SAT_SETUP_CALL_WITH_SS_STR,modem_sbp_config[116].SBP_SAT_SETUP_CALL_WITH_SS_STR,OTA and OTA BY OP,no,no,no,yes,This SBP allows SS/USSD operation if SS/USSD string is received in SETUP CALL from faulty SIM.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,"if compile option __SETUP_CALL_WITH_SS_STR__ is defined, the SBP is enabled",SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8879,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_SEND_POLL_ON_VRB_SHORTAGE,modem_sbp_config[118].SBP_SEND_POLL_ON_VRB_SHORTAGE,OTA and OTA BY OP,no,no,no,yes,"This SBP allows Enable/Disable of the feature of Poll sending, based on VRB status (derived by checking VR_H/VR_R), to the network.<BR>This will help to get ACK from network, and RLC window can move ahead, and this will avoid VRB shortage situation.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~1:This SBP is used to trigger sending of POLL when VRB FULL, to avoid stall.",,,"if compile option __SBP_SEND_POLL_ON_VRB_SHORTAGE__ is defined, the SBP is Enabled",MD Config,Modem - Customer Requirement,,,,Pass,,,,
+8880,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[116].SBP_SKIP_EMC_REJECT_WHEN_EMC_BS_FALSE_SIB_SUPPORT_IMS_EMC,modem_sbp_config[116].SBP_SKIP_EMC_REJECT_WHEN_EMC_BS_FALSE_SIB_SUPPORT_IMS_EMC,OTA and OTA BY OP,no,no,no,yes,"When EMC BS not supported in attach accept message from NW, EMM sends EMC_ATTACH_REJ. With this SBP enabled,<BR>Do not send EMC_ATTACH_REJ or EMC_DATA_FAIL_IND when EMC_BS not supported, but cell support IMS EMC (ims_emergency_support is TRUE).",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __DISABLE_SKIP_EMC_REJECT_WHEN_EMC_BS_FALSE_SIB_SUPPORT_IMS_EMC__ is defined, the SBP is disabled.",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+8881,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_STORE_MEID_ESN_ERROR,modem_sbp_config[118].SBP_STORE_MEID_ESN_ERROR,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:only try store esn once,,,,1xRTT,3G,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]using a card which can't store esn successfully<BR>[Test Step]insert card and boot up phone<BR>[Expected Result]phone boot up and register to network normally,Untested,,,,
+8882,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,modem_sbp_config[117].SBP_TCM_ALLOW_REQUSET_EMPTY_AUTHENTICATION_PROTOCOL,OTA and OTA BY OP,no,no,no,yes,"Let the user fully control authentication content, allow TCM request authentication even when username or password is empty.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:allow for TCM to request authentication even when username or password is empty<BR>0:not allow for TCM to request authentication even when username or password is empty,,,This feature can be enabled by adding __TCM_REQUSET_NULL_AUTHENTICATION_PROTOCOL__ in makefile.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (5 minutes)<BR>[Init]<BR>[Test Step] using cgauth to set null username/password<BR>[Expected Result] check when value is 0, UE won't requset PAP or CHAP, if 1, requset",Pass,,,,
+8883,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[117].SBP_USE_SUGGESTED_RACH_BAR_PARA,modem_sbp_config[117].SBP_USE_SUGGESTED_RACH_BAR_PARA,OTA and OTA BY OP,no,no,no,yes,This SBP is to make ERRC CONN to overwrite RACH bar parameter which is read from NVRAM for testSIM or FTA mode.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1:Turn on to enable overwrite RACH bar parameter for testSIM or FTA<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,"If compile option __USE_SUGGESTED_RACH_BAR_PARA__ is defined, the SBP is default enable.",LTE Protocol (R9 Baseline),4G,,,,Pass,,,,
+8884,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[80].SBP_DATA_HPPLMN_SEARCH_TIMER,modem_sbp_data_config[80].SBP_DATA_HPPLMN_SEARCH_TIMER,OTA and OTA BY OP,no,no,no,yes,"TS 23.122:<BR>If the MS is in a VPLMN, the MS shall periodically attempt to obtain service on its HPLMN or one of its EHPLMNs or a higher priority PLMN.T is either in the range 6 minutes to 8 hours in 6 minute step or it indicates that no periodic attempts shall be made.<BR><BR>For flexibility, we provide a SBP data to configure the value of HPPLMN search timer. If this SBP data is configured, we would use it as the interval of higher-priority PLMN search and ignore the value T which may be stored in the SIM.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1~255:minutes,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+8885,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[84].SBP_EMM_R15_SET_RAT_NO_DETACH_BY_LIST,modem_sbp_data_config[84].SBP_EMM_R15_SET_RAT_NO_DETACH_BY_LIST,OTA and OTA BY OP,no,no,no,yes,This SBP data value is decided the list to refer for detach-required detection during SET_RAT procedure .,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"2:if old/new_rat_mode setting includes LTE, NOT perform detach by referring to white list<BR>0:disable whitelist/blacklist, the detach algo is EMM_RATBAND_DETACH_ALGORM_1<BR>1:if old/new_rat_mode setting includes LTE, perform detach by referring to blacklist",,,N/A,MD Config,Modem - Customer Requirement,,,SET RAT procedure,Pass,,,,
+8886,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[81].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_COUNT,modem_sbp_data_config[81].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_COUNT,OTA,no,no,no,yes,This SBP controls the GPRS attach counter after network initiated detach with re-attach not required when cause received is other than #2/#3/#6/#7/#8/#11/#12/#13/#14/#15/#25.,BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,This SBP Data feature will be available only when SBP SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE is enabled.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N):Y<BR>Test Time (minutes) 5 MIN<BR>[Init] DUT boot up <BR>[Test Step]Detach request by Network with cause other than 2,8,3,6,7,11,12,13,14,15,25 with reattach not required along with SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE enabled<BR>[Expected Result] observe how many times UR triggers GMM attach",Pass,,,,
+8887,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[82].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_GUARD_TIMER_VALUE,modem_sbp_data_config[82].SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE_GUARD_TIMER_VALUE,OTA,no,no,no,yes,This SBP controls the Gprs reattach guard timer value for network initiated detach <BR>when cause received is other than #2/#3/#6/#7/#8/#11/#12/#13/#14/#15/#25.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N):Y<BR>Test Time (minutes) 5 MIN<BR>[Init] DUT boot up <BR>[Test Step]Detach request by Network with cause other than 2,8,3,6,7,11,12,13,14,15,25 with reattach not required along with SBP_GMM_REATTACH_FOR_NW_DETACH_OTHER_CAUSE enabled<BR>[Expected Result] observe how many times UR triggers GMM attach",Pass,,,,
+8888,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[83].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE,modem_sbp_data_config[83].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"TS 24.301 subclause 5.5.1.3.5 of rej#14:<BR>The UE shall store the PLMN identity in the "forbidden PLMNs for GPRS service" list. <BR>A UE operating in CS/PS mode 1 of operation and supporting A/Gb or Iu mode may select GERAN or UTRAN radio access technology and proceed with the appropriate MM specific procedure according to the MM service state. In this case, the UE shall disable the E-UTRA capability (see subclause 4.5)<BR><BR>TS 23.122 subclause 3.1, it only mentions that the VPLMN is added to a list of "forbidden PLMNs for GPRS service" when rej#14.<BR><BR>Therefore, in current design, only VPLMN will be added to the "forbidden PLMNs for GPRS service". For customization, we provide a SBP data to config for HPLMN. <BR><BR>Default value is 0, which means the customization is disabled.<BR>If value is larger than 0, it means the value of HPLMN eutran disable timer when rej#14.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable this configuration<BR>1~255:minutes,,,N/A,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
+8889,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[79].SBP_MCF_CB_CONTROL_SWITCH,modem_sbp_data_config[79].SBP_MCF_CB_CONTROL_SWITCH,OTA and OTA BY OP,no,no,no,yes,This acts as bit map which controls CB settings for different RATS,BIT,8,,8,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8890,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit1,nvram_sim_profile[35].bit1,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>Data Connection Status Change Event support - PDU Connection<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
+8891,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit2,nvram_sim_profile[35].bit2,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>Event: Network Rejection for NG-RAN<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
+8892,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit3,nvram_sim_profile[35].bit3,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>Non-IP Data Delivery support (if class e and class ai are supported)<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
+8893,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit4,nvram_sim_profile[34].bit4,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>REFRESH with Application Update mode (i.e. class af is supported)<BR>bit 0:0:Not supported <BR>bit 1:1:supported,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Pass,,,,
+8894,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[35].bit4to8,nvram_sim_profile[35].bit4to8,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>RFU,BIT,5,,5,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
+8895,835,NVRAM_EF_SIM_PROFILE_LID,"1,2",nvram_sim_profile[34].bit5to8,nvram_sim_profile[34].bit5to8,OTA and OTA BY OP,no,no,no,no,[MCF] SIM/USIM Terminal profile<BR>RFU,BIT,4,,4,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,RD IT done. No need for tester effort,Untested,,,,
+8896,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[118].SBP_ENABLE_BMVNO_SIMME_LOCK_CONFIG,modem_sbp_config[118].SBP_ENABLE_BMVNO_SIMME_LOCK_CONFIG,OTA and OTA BY OP,no,no,no,yes,"This SBP ID used to enable the BMVNO SIMME LOCK configuration.<BR>If turned on this SBP, the plmn list defined under the BMVNO flag will be considered as Whitelist",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __ENABLE_BMVNO_SIMME_LOCK_CONFIG__ is defined, the SBP is enabled",,,,,,Untested,,,,
+8897,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_L2_SET_CTCH_IS_DROP_ALL_ZERO_SDUS,modem_sbp_config[119].SBP_L2_SET_CTCH_IS_DROP_ALL_ZERO_SDUS,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable drop of all zero SDUs.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Valid value is 1,,,This feature is controlled by __CTCH_IS_DROP_ALL_ZERO_SDUS__flag,WCDMA Protocol (R8 Baseline),3G,,,,Untested,,,,
8899,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",lte_band_list,plmn_band_info.plmn_band_list[0~4].lte_band_list,OTA and OTA BY OP,no,no,no,no,LTE band list. This belongs to information which LTE and NR bands are used in PLMN.,UNSIGNED SHORT,20,10,,"3, 39, 40, 0, 0, 0, 0, 0, 0, 0, 1, 3, 5, 8, 39, 40, 0, 0, 0, 0, 1, 3, 5, 8, 39, 40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0",NR15.R3.MD700.IVT.MP1MR3.MP,,0:invalid LTE band<BR>1-256:valid LTE band,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value<BR>Expected Result: Value changes in NVRAM,Pass,,,,
8900,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nr_band_list,plmn_band_info.plmn_band_list[0~4].nr_band_list,OTA and OTA BY OP,no,no,no,no,NR band list. This belongs to information which LTE and NR bands are used in PLMN.,UNSIGNED SHORT,20,10,,"41, 78, 79, 0, 0, 0, 0, 0, 0, 0, 1, 3, 5, 41, 78, 79, 0, 0, 0, 0, 1, 3, 8, 41, 78, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0",NR15.R3.MD700.IVT.MP1MR3.MP,,0:invalid NR band<BR>1-1024:valid NR band,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value<BR>Expected Result: Value changes in NVRAM,Pass,,,,
8901,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mcc1,plmn_band_info.plmn_band_list[0~4].plmn_id.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID. This belongs to information which LTE and NR bands are used in this PLMN.,UNSIGNED CHAR,1,,,"0x04, 0x04, 0x04, 0x00, 0x00",NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:invalid digit<BR>0x00-0x09:valid digit,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value<BR>Expected Result: Value changes in NVRAM,Pass,,,,
@@ -8802,24 +8802,24 @@
8904,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mnc1,plmn_band_info.plmn_band_list[0~4].plmn_id.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID. This belongs to information which LTE and NR bands are used in this PLMN.,UNSIGNED CHAR,1,,,"0x00, 0x00, 0x00, 0x00, 0x00",NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:invalid digit<BR>0x00-0x09:valid digit,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value<BR>Expected Result: Value changes in NVRAM,Pass,,,,
8905,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mnc2,plmn_band_info.plmn_band_list[0~4].plmn_id.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID. This belongs to information which LTE and NR bands are used in this PLMN.,UNSIGNED CHAR,1,,,"0x00, 0x03, 0x01, 0x00, 0x00",NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:invalid digit<BR>0x00-0x09:valid digit,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value<BR>Expected Result: Value changes in NVRAM,Pass,,,,
8906,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mnc3,plmn_band_info.plmn_band_list[0~4].plmn_id.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID. This belongs to information which LTE and NR bands are used in this PLMN.,UNSIGNED CHAR,1,,,"0x0f, 0x0f, 0x0f, 0x00, 0x00",NR15.R3.MD700.IVT.MP1MR3.MP,,0x0F:invalid digit<BR>0x00-0x09:valid digit,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value<BR>Expected Result: Value changes in NVRAM,Pass,,,,
-8907,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_EMM_PERFORM_SYNC_TAU_AFTER_RELEASE_TAU_DRB,modem_sbp_config[119].SBP_EMM_PERFORM_SYNC_TAU_AFTER_RELEASE_TAU_DRB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform local release and state sync TAU after UE releases DRB actively<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8908,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_EMM_RELEASE_TAU_DRB_BY_DATA_TYPE,modem_sbp_config[119].SBP_EMM_RELEASE_TAU_DRB_BY_DATA_TYPE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>According to data type to start a timer, when timer expire, release the semaphore of TAU DRB<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-8909,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_GEMINI_REPORT_FULL_CAPABILITY,modem_sbp_config[119].SBP_GEMINI_REPORT_FULL_CAPABILITY,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Always report full capability for all SIM<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Disabled<BR>bit 1:1:Enabled,,,,N+L DR-DSDS,Multiple SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-8911,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_EXTEND_PAGING_PROTECT_LENGTH,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_EXTEND_PAGING_PROTECT_LENGTH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>extend paging protect length for consecutive paging<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Not Enabled<BR>bit 1:1:Enabled,,,__ENABLE_VGMM_DYNAMICALLY_EXTEND_PAGING_PROTECT_LENGTH__,MD Config,Modem - Customer Requirement,,,"1. Enable SBP<BR>2. Insert 2 SIMs in 1st UE, insert 1 SIM in 2nd UE<BR>3. 2nd UE make call to non-data SIM of 1st UE<BR>4. hang-up, web browsing on 1st UE, check browsing start after 2 seconds<BR>5. 2nd UE make call to non-data SIM of 1st UE<BR>6. hang-up, web browsing on 1st UE, check browsing start after 3 seconds",Pass,,,,
-8912,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_SHORTEN_PAGING_PROTECT_LENGTH_BY_DATA,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_SHORTEN_PAGING_PROTECT_LENGTH_BY_DATA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>shorten paging protect period based on DL data type<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Not Enabled<BR>bit 1:1:Enabled,,,__ENABLE_VGMM_DYNAMICALLY_SHORTEN_PAGING_PROTECT_LENGTH_BY_DATA__<BR>,MD Config,Modem - Customer Requirement,,,"depend on nw behavior, cannot IT",Pass,,,,
-8913,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_VGMM_PROTECT_UP_RESOURCE_EST_DURING_MRU,modem_sbp_config[119].SBP_VGMM_PROTECT_UP_RESOURCE_EST_DURING_MRU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Protect connection upon unsolicited UP resource established during Registration procedure<BR>bit 0:0:Disable, VGMM does not protect connection upon unsolicited UP resource established during Registration procedure.<BR>bit 1:1:VGMM will protect connection upon unsolicited UP resource established during Registration procedure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:0:Disable, VGMM does not protect connection upon unsolicited UP resource established during Registration procedure.<BR>1:VGMM will protect connection upon unsolicited UP resource established during Registration procedure.",,,,N+L,Multiple SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
-8914,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_SUPPLEMENTARY_SERVICES_CS_ONLY,modem_sbp_config[120].SBP_SUPPLEMENTARY_SERVICES_CS_ONLY,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>__SUPPLEMENTARY_SERVICES_CS_ONLY__<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8907,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_EMM_PERFORM_SYNC_TAU_AFTER_RELEASE_TAU_DRB,modem_sbp_config[119].SBP_EMM_PERFORM_SYNC_TAU_AFTER_RELEASE_TAU_DRB,OTA and OTA BY OP,no,no,no,yes,Non-data SIM actively releases DRB session if no more DL data from NW is expected. Perform a state-sync TAU after RRC connection is released locally.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __SBP_EMM_PERFORM_SYNC_TAU_AFTER_RELEASE_TAU_DRB__,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+8908,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_EMM_RELEASE_TAU_DRB_BY_DATA_TYPE,modem_sbp_config[119].SBP_EMM_RELEASE_TAU_DRB_BY_DATA_TYPE,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, EMM will start a timer according to different data type with the defferent timer value.<BR>When timer expire, release the semaphore of TAU DRB.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __SBP_EMM_RELEASE_TAU_DRB_BY_DATA_TYPE__,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+8909,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_GEMINI_REPORT_FULL_CAPABILITY,modem_sbp_config[119].SBP_GEMINI_REPORT_FULL_CAPABILITY,OTA,no,no,no,yes,Always report full capability for all SIM,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Disabled<BR>bit 1:1:Enabled,,,This feature is controlled by __GEMINI_REPORT_FULL_CAPABILITY__ flag,N+L DR-DSDS,Multiple SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+8911,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_EXTEND_PAGING_PROTECT_LENGTH,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_EXTEND_PAGING_PROTECT_LENGTH,OTA and OTA BY OP,no,no,no,yes,"After paging resource protection is completed, it will become possible that peer SIM interrupts the activity on current SIM.<BR>However, if NW still has pending DL data to be sent, NW would send paging to current SIM again, which leads to peer SIM performance downgradation.<BR>When this SBP is on, VGMM would extend the paging protect length if consecutive paging is received in short time. <BR>Thus DL data tranmission on current SIM can be performed longer without interruption, and reduce subsequent paging numbers.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Not Enabled<BR>bit 1:1:Enabled,,,This feature will be enabled if __ENABLE_VGMM_DYNAMICALLY_EXTEND_PAGING_PROTECT_LENGTH__ is defined.,MD Config,Modem - Customer Requirement,,,"1. Enable SBP<BR>2. Insert 2 SIMs in 1st UE, insert 1 SIM in 2nd UE<BR>3. 2nd UE make call to non-data SIM of 1st UE<BR>4. hang-up, web browsing on 1st UE, check browsing start after 2 seconds<BR>5. 2nd UE make call to non-data SIM of 1st UE<BR>6. hang-up, web browsing on 1st UE, check browsing start after 3 seconds",Pass,,,,
+8912,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_SHORTEN_PAGING_PROTECT_LENGTH_BY_DATA,modem_sbp_config[119].SBP_VGMM_DYNAMICALLY_SHORTEN_PAGING_PROTECT_LENGTH_BY_DATA,OTA and OTA BY OP,no,no,no,yes,"Resource protection for paging procedure would be last for 2 secs in default setting, and peer SIM has no resource for entirely 2 secs, which leads to peer SIM performance downgradation.<BR>When this SBP is on, VGMM would shorten paging resource protection period based on the DL data type(ims, internet,...), so peer SIM service can be recovered in shorter time.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Not Enabled<BR>bit 1:1:Enabled,,,This feature will be enabled if __ENABLE_VGMM_DYNAMICALLY_SHORTEN_PAGING_PROTECT_LENGTH_BY_DATA__ is defined.,MD Config,Modem - Customer Requirement,,,"depend on nw behavior, cannot IT",Pass,,,,
+8913,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_VGMM_PROTECT_UP_RESOURCE_EST_DURING_MRU,modem_sbp_config[119].SBP_VGMM_PROTECT_UP_RESOURCE_EST_DURING_MRU,OTA and OTA BY OP,no,no,no,yes,"Some networks may send SIP message during registration procedure for mobility and periodic <BR>update request without user plane resource but network still establishes some, and the <BR>SIP message may be a MT IMS call. This SBP let current SIM protects connection for 5s with <BR>higher priority in the above scenario to avoid being interrupted by other SIM, so it can <BR>receive the SIP message.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:0:Disable, VGMM does not protect connection upon unsolicited UP resource established during Registration procedure.<BR>1:VGMM will protect connection upon unsolicited UP resource established during Registration procedure.",,,This feature is controlled by __ENABLE_VGMM_PROTECT_UP_RESOURCE_EST_DURING_MRU__.,N+L,Multiple SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+8914,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_SUPPLEMENTARY_SERVICES_CS_ONLY,modem_sbp_config[120].SBP_SUPPLEMENTARY_SERVICES_CS_ONLY,Not Support,no,no,no,yes,AP send SS to MD which need to select CS domain.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"if compile option __SUPPLEMENTARY_SERVICES_CS_ONLY__ is defined, the SBP is enabled",IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9393,2816,NVRAM_EF_BIP_PROFILE_LID,1,ds_profile,bip_ds_mgr_cfg.ds_profile,OTA,no,no,no,no,BIP DS supported profile,UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x04:0x00 - no PDN connection will be try neither over 3GPP nor over WiFi<BR>0x01 - PDN connection first try over wifi if it failed the try over 3GPP<BR>0x02 - PDN connection first try over 3GPP if it failed the try over WiFi<BR>0x03 - PDN try over only 3GPP<BR>0x04 - PDN connection try over WiFi only,,,,Bearer Independent Protocol (BIP),MTK Proprietary,,,Test in machine (Y/N)N<BR>Test Time (minutes)<BR>[Init] Precondition<BR>[Test Step] Test SIM Steps<BR>[Expected Result] Output,Pass,,,,
-9394,2816,NVRAM_EF_BIP_PROFILE_LID,1,sprint_ds_retry_count,bip_ds_mgr_cfg.sprint_ds_retry_count,OTA,no,no,no,no,BIP channel retry count sprint profile,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00~0x03:For SPRINT if PDN connection failed first time then it again retry PDN connection upto given set value, but every retry takes almost '5' sec delay",,,,Bearer Independent Protocol (BIP),MTK Proprietary,,,Test in machine (Y/N)N<BR>Test Time (minutes)<BR>[Init] Precondition<BR>[Test Step] Test SIM Steps<BR>[Expected Result] Output,Pass,,,,
-9395,2816,NVRAM_EF_BIP_PROFILE_LID,1,apn,bip_sim_mgr_cfg.apn,OTA,no,no,no,no,Default APN name to be used,CHAR,100,100,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:any,,,,Bearer Independent Protocol (BIP),MTK Proprietary,,,Test in machine (Y/N)N<BR>Test Time (minutes)<BR>[Init] Precondition<BR>[Test Step] Test SIM Steps<BR>[Expected Result] Output,Pass,,,,
+9394,2816,NVRAM_EF_BIP_PROFILE_LID,1,sprint_ds_retry_count,bip_ds_mgr_cfg.sprint_ds_retry_count,OTA,no,no,no,no,BIP channel retry count sprint profile,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0x03,,,,Bearer Independent Protocol (BIP),MTK Proprietary,,,Test in machine (Y/N)N<BR>Test Time (minutes)<BR>[Init] Precondition<BR>[Test Step] Test SIM Steps<BR>[Expected Result] Output,Pass,,,,
+9395,2816,NVRAM_EF_BIP_PROFILE_LID,1,apn,bip_sim_mgr_cfg.apn,OTA,no,no,no,no,Default APN name to be used,CHAR,100,100,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,Bearer Independent Protocol (BIP),MTK Proprietary,,,Test in machine (Y/N)N<BR>Test Time (minutes)<BR>[Init] Precondition<BR>[Test Step] Test SIM Steps<BR>[Expected Result] Output,Pass,,,,
9396,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_param_in_rm_prtcpnt,ua_config.add_param_in_rm_prtcpnt,OTA and OTA BY OP,no,no,no,no,add parameters that be set from AP's request.<BR>0: disabled.<BR>1: enabled.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disabled<BR>1:enabled,,,No dependency,IMS,IMS,,,"Test in machine (Y/N) N<BR>Test Time (minutes)<BR>[Init]<BR>Issue reported on Vietnamobile operator but it can happen anywhere<BR>[Test Step]<BR>1. UE1 make MO call to UE2, UE2 answer the call.<BR>2. UE1 make MO call to UE3, UE3 answer the call.<BR>3. UE1 perform merge UE2 and UE3 calls, check voice on all participants<BR>4. UE1 removes UE3 from conference Call using manage conference<BR>5. UE3 make MO call to UE1, UE1 accepts call<BR>6. UE1 perform merge UE2 and UE3 calls,, check voice on all participants<BR>7. UE1 remove UE2 from Conference call using manage conference<BR>8. Observe that Call gets dropped at UE-3, when UE-2 is removed from Conference manage button and in conference manage button it shows as disconnecting UE-2.<BR>[Expected Result]<BR>At step 7 , UE 2 should be successfully removed from conference",Untested,,,,
9397,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_param_in_rm_prtcpnt.add_param_in_rm_prtcpnt,ua_config.add_param_in_rm_prtcpnt.add_param_in_rm_prtcpnt,Not Support,no,no,no,no,[MCF]<BR>add parameters that be set from AP's request.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9398,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sdp_group_rtpmap_fmtp,ua_config.sdp_group_rtpmap_fmtp,OTA and OTA BY OP,no,no,no,no,The Feature control the method that listing rtpmap and fmtp parameter<BR>0: list fmtp SDP parameters after all rtpmap parameters<BR>1: list fmtp SDP parameters right after the corresponding rtpmap parameters<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:list fmtp SDP parameters after all rtpmap parameters<BR>1:list fmtp SDP parameters right after the corresponding rtpmap parameters,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
9399,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sdp_group_rtpmap_fmtp.sdp_group_rtpmap_fmtp,ua_config.sdp_group_rtpmap_fmtp.sdp_group_rtpmap_fmtp,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>The Feature control the method that listing rtpmap and fmtp parameter<BR>bit 0:0:list fmtp SDP parameters after all rtpmap parameters<BR>bit 1:1:list fmtp SDP parameters right after the corresponding rtpmap parameters,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Register to VoLTE<BR>[Test Step]<BR>Set up an MO call<BR>[Expected Result]<BR>Parameter value 0: MO INVITE's all fmtp lines should be after rtpmap lines in SDP<BR>Parameter value 1: MO INVITE's each fmtp line in SDP should be right next to corresponding rtpmap line,Untested,,,,
9400,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sdp_group_rtpmap_ptime,ua_config.sdp_group_rtpmap_ptime,OTA and OTA BY OP,no,no,no,no,"The Feature control the method that listing ptime parameter<BR>0: list ptime SDP parameters after all rtpmap and fmtp parameters<BR>1: list ptime SDP parameters right after the corresponding rtpmap (and fmtp, depending on configuration) parameters.<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:list ptime SDP parameters after all rtpmap and fmtp parameters<BR>1:list ptime SDP parameters right after the corresponding rtpmap (and fmtp, depending on configuration) parameters",,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9401,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sdp_group_rtpmap_ptime.sdp_group_rtpmap_ptime,ua_config.sdp_group_rtpmap_ptime.sdp_group_rtpmap_ptime,Not Support,no,no,no,no,"[MCF]<BR>The Feature control the method that listing ptime parameter<BR>bit 0:0:list ptime SDP parameters after all rtpmap and fmtp parameters<BR>bit 1:1:list ptime SDP parameters right after the corresponding rtpmap (and fmtp, depending on configuration) parameters.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Register to VoLTE<BR>[Test Step]<BR>Set up an MO call<BR>[Expected Result]<BR>Parameter value 0: MO INVITE's all ptime lines should be after rtpmap lines in SDP<BR>Parameter value 1: MO INVITE's each ptime line in SDP should be right next to corresponding rtpmap (and possibly fmtp) line,Untested,,,,
-9402,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_CHECK_REQ_RES_APN_CLASS_CONSISTENCY,modem_sbp_config[120].SBP_CHECK_REQ_RES_APN_CLASS_CONSISTENCY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>ESM does not check the APN Class consistency.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-9403,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_LIMIT_LTE_CAP_SIZE_FOR_3G_QUERY,modem_sbp_config[120].SBP_LIMIT_LTE_CAP_SIZE_FOR_3G_QUERY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not support limit eutra capability size for 3G query.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+9402,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_CHECK_REQ_RES_APN_CLASS_CONSISTENCY,modem_sbp_config[120].SBP_CHECK_REQ_RES_APN_CLASS_CONSISTENCY,OTA and OTA BY OP,no,no,no,yes,"SBP on:<BR>When UE receives the Activate Default EPS Bearer Context Request, <BR>ESM would check whether the APN Class in NW NAS message is the same with the APN Class in PDN Connectivity Request or not.<BR>If the APN Class is different in the PDN Connecitivty Request and in the Activate Default EPS Bearer Context Request,<BR>ESM would send Activate Default EPS Bearer Context Reject with ESM cause #96, "invalid mandatory information"<BR>Furthermore, ESM would notify the upper layer about the failure of establishing the PDN Connecitivty.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature is controlled by __SBP_CHECK_REQ_RES_APN_CLASS_CONSISTENCY__.,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+9403,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_LIMIT_LTE_CAP_SIZE_FOR_3G_QUERY,modem_sbp_config[120].SBP_LIMIT_LTE_CAP_SIZE_FOR_3G_QUERY,OTA and OTA BY OP,no,no,no,yes,Limit eutra capability size for 3G query.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,This feature is controlled by __SBP_LIMIT_LTE_CAP_SIZE_FOR_3G_QUERY__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9404,60561,NVRAM_EF_EL1_SINGLE_BAND_4RX_CONFIG_LID,1,sb_by_band_config[0].val_d,sb_4rx.sb_by_band_config[0].val_d,OTA,no,no,no,no,LTE_Band1~LTE_Band32,BIT,32,,32,4294967295,NR15.R3.MD700.IVT.MP1MR3.MP,,1:on<BR>0:OFF,,,,MD Config,Modem - Customer Requirement,,,Update Value and check. Note that this item is not used in gen97.,Untested,,,,
9405,60561,NVRAM_EF_EL1_SINGLE_BAND_4RX_CONFIG_LID,1,sb_by_band_config[1].val_d,sb_4rx.sb_by_band_config[1].val_d,OTA,no,no,no,no,LTE_Band33~LTE_Band64,BIT,32,,32,4294967295,NR15.R3.MD700.IVT.MP1MR3.MP,,0:OFF<BR>1:ON,,,,MD Config,Modem - Customer Requirement,,,Update Value and check. Note that this item is not used in gen97.,Untested,,,,
9406,60561,NVRAM_EF_EL1_SINGLE_BAND_4RX_CONFIG_LID,1,sb_by_band_config[2].val_d,sb_4rx.sb_by_band_config[2].val_d,OTA,no,no,no,no,LTE_Band65~LTE_Band96,BIT,32,,32,4294967295,NR15.R3.MD700.IVT.MP1MR3.MP,,1:ON<BR>0:OFF,,,,MD Config,Modem - Customer Requirement,,,Update Value and check. Note that this item is not used in gen97.,Untested,,,,
@@ -8863,35 +8863,35 @@
9476,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",rohc_profiles_r15[8].ROHC_PROFILE_0x0104,pdcp_param_nr_r15.rohc_profiles_r15[8].ROHC_PROFILE_0x0104,OTA and OTA BY OP,no,no,no,no,Defines which ROHC profiles from the list below are supported by the UE. An UE that supports one or more of the listed ROHC profiles shall support ROHC profile 0x0000 ROHC uncompressed (RFC 5795).<BR>ROHC IP (RFC 5225)<BR>bit 0:0:Not supported<BR>bit 1:1:Supported,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
9477,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",rohc_ul_profiles_r15[0].UL_ROHC_PROFILE_0x0006,pdcp_param_nr_r15.rohc_ul_profiles_r15[0].UL_ROHC_PROFILE_0x0006,OTA and OTA BY OP,no,no,no,no,Indicates which ROHC profile(s) from the list below are supported in uplink-only ROHC operation by the UE. An UE that supports uplink-only ROHC profile(s) shall support ROHC profile 0x0000 ROHC uncompressed (RFC 5795).<BR>ROHC TCP (RFC 6846)<BR>bit 0:0:Not supported<BR>bit 1:1:Supported,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
9478,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",rohc_ul_profiles[0].UL_ROHC_PROFILE_0x0006,pdcp_param_v1430.rohc_ul_profiles[0].UL_ROHC_PROFILE_0x0006,OTA and OTA BY OP,no,no,no,no,ROHC TCP (RFC 6846)<BR>bit 0:0:Not supported<BR>bit 1:1:Supported,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
-9479,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[85].SBP_NR_BANDWIDTH_MAX_BOUNDARY,modem_sbp_data_config[85].SBP_NR_BANDWIDTH_MAX_BOUNDARY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>maximum bandwidth boundary of supported NR CA<BR>bit 1:1:NR SPEC MAXIMUM BOUNDARY<BR>bit 2:2:100 MHz BW per CC",BIT,8,,8,0xdd,NR15.R3.MD700.IVT.MP1MR3.MP,,unsigned char: 1~2:1 : align spec per band maximum BW.<BR>2 : BW 100MHz per CC.,,,,,,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+9479,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[85].SBP_NR_BANDWIDTH_MAX_BOUNDARY,modem_sbp_data_config[85].SBP_NR_BANDWIDTH_MAX_BOUNDARY,OTA and OTA BY OP,no,no,no,yes,This SBP defines the maximum bandwidth boundary of supported NR CA.,BIT,8,,8,0xdd,NR15.R3.MD700.IVT.MP1MR3.MP,,unsigned char: 1~2:1 : align spec per band maximum BW.<BR>2 : BW 100MHz per CC.,,,N/A,5G option capability update,MTK Proprietary,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
9480,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",in_reply_to_support,ua_config.in_reply_to_support,OTA and OTA BY OP,no,no,no,no,"Check In-Reply-To header when MO SMS, the default value is 1<BR>0: Disable<BR>1: Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
9481,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",in_reply_to_support.in_reply_to_support,ua_config.in_reply_to_support.in_reply_to_support,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>Check In-Reply-To header when MO SMS, the default value is 1<BR>value 0:0:Disable<BR>value 1:1:Enable",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-9482,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_LADN_SUPPORT,modem_sbp_config[119].SBP_LADN_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LADN Support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0 : LADN not support<BR>1 : LADN is supported,,,,LADN,5G Baseline,,,Currently we only performed NWSIM test cases (no machine cases).<BR><BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-9483,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_BLIND_AFR_3G4_FDD,modem_sbp_config[120].SBP_BLIND_AFR_3G4_FDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Whether blind AFR from 3G FDD to 4G is activated<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-9484,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_AC_BAR_ENHANCE,modem_sbp_config[120].SBP_AC_BAR_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip AC Bar and trigger connection establishment if AC barred continously for specific times.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: AC_BAR_ENHANCE is disable<BR>1: AC_BAR_ENHANCE is enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>[Test Step] https://wiki.mediatek.inc/display/WCTSE3/Internal+IT<BR>[Expected Result] shown in wiki,Untested,,,,
-9485,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_ELEVATOR_MODE_PHASE2,modem_sbp_config[120].SBP_ELEVATOR_MODE_PHASE2,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Modem elevator mode uses TGPS<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0:Disable<BR>1:Enable,,,this will be enabled only when __ELEVATOR_MODE_PHASE2__ is enabled,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10-15 min<BR>[Init] Initially UE should camp on 4G and move to 3G<BR>[Test Step] UE should be in connected mode<BR>[Expected Result] If SBP_ELEVATOR_MODE_PHASE2 is 1, UE will search for LTE freq in connected mode",Pass,,,,
-9486,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_SKIP_AC_BAR_FOR_HIGH_PRIORITY_TASKS,modem_sbp_config[120].SBP_SKIP_AC_BAR_FOR_HIGH_PRIORITY_TASKS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip AC bar for high priority tasks.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: all session can not skip AC BAR<BR>1: high priority session can skip AC BAR in condition,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-9487,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_SSAC_BAR_ENHANCE,modem_sbp_config[120].SBP_SSAC_BAR_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip AC Bar when SSAC barred<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: SSAC enhance feature disable<BR>1: SSAC enhance feature enable,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+9482,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[119].SBP_LADN_SUPPORT,modem_sbp_config[119].SBP_LADN_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"If this flag is enabled, LADN is supported, LADN indication IEI will be provided to NW when initial regristration",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0 : LADN not support<BR>1 : LADN is supported,,,N/A,LADN,5G Baseline,,,Currently we only performed NWSIM test cases (no machine cases).<BR><BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+9483,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_BLIND_AFR_3G4_FDD,modem_sbp_config[120].SBP_BLIND_AFR_3G4_FDD,OTA and OTA BY OP,no,no,no,yes,"This feature is to enhance LTE occupation rate in case 3G RRC connection release including CSFB call,<BR>3G call,LU,SMS and so on. When 3G RRC connection release,fast return to LTE would be triggered.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+9484,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_AC_BAR_ENHANCE,modem_sbp_config[120].SBP_AC_BAR_ENHANCE,OTA and OTA BY OP,no,no,no,yes,The AC Bar enhancement is allowed on mo data and mo signal establish type.<BR>This enhancement will trigger connection establishment easier if continuously got AC barred,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: AC_BAR_ENHANCE is disable<BR>1: AC_BAR_ENHANCE is enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] <BR>[Test Step] https://wiki.mediatek.inc/display/WCTSE3/Internal+IT<BR>[Expected Result] shown in wiki,Pass,,,,
+9485,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_ELEVATOR_MODE_PHASE2,modem_sbp_config[120].SBP_ELEVATOR_MODE_PHASE2,OTA and OTA BY OP,no,no,no,yes,"Modem elevator mode uses fake TGPS for detection of 4G freq when nw doesn't configure gaps for 4G in connected mode. <BR>When this flag is enabled, it combines phase 1 and phase2 detection of elevator mode.<BR>It means phase1 uses phase2 method to detect LTE freq.",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0:Disable<BR>1:Enable,,,This feature is controlled by __ELEVATOR_MODE_PHASE2__.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10-15 min<BR>[Init] Initially UE should camp on 4G and move to 3G<BR>[Test Step] UE should be in connected mode<BR>[Expected Result] If SBP_ELEVATOR_MODE_PHASE2 is 1, UE will search for LTE freq in connected mode",Pass,,,,
+9486,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_SKIP_AC_BAR_FOR_HIGH_PRIORITY_TASKS,modem_sbp_config[120].SBP_SKIP_AC_BAR_FOR_HIGH_PRIORITY_TASKS,OTA and OTA BY OP,no,no,no,yes,"ERRC check to bring in skip AC barring mechanism for high priority tasks like IMS_REG,<BR>IMS_RE_REG, IMS_CALL, EMM_ATTACH and ESM_ACT_PDN_IMS. Otherwise instead of skip AC Bar<BR>retry on 4G neighbour",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: all session can not skip AC BAR<BR>1: high priority session can skip AC BAR in condition,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+9487,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[120].SBP_SSAC_BAR_ENHANCE,modem_sbp_config[120].SBP_SSAC_BAR_ENHANCE,OTA and OTA BY OP,no,no,no,yes,The SSAC Bar enhancement is allowed on ViLTE call and VoLTE call type. <BR>ViLTE call will downgrade to VoLTE call if ViLTE continuously got SSAC barred.<BR>And CSFB to 2/3G if VoLTE call also got SSAC barred.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: SSAC enhance feature disable<BR>1: SSAC enhance feature enable,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
9488,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",max_vilte_ssac_retry_num,profile_emerg.general_setting_emerg.max_vilte_ssac_retry_num,OTA BY OP,no,no,no,yes,"OPPO requirement,Maximum number of ssac reselect retry number for vilte call",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255:Maximum number of ssac reselect retry number for vilte call,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. dial emergency call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Pass,,,,
9489,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",max_volte_ssac_retry_num,profile_emerg.general_setting_emerg.max_volte_ssac_retry_num,OTA BY OP,no,no,no,yes,"OPPO requirement,Maximum number of ssac reselect retry number for volte call",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255:Maximum number of ssac reselect retry number for volte call,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. dial emergency call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Pass,,,,
9490,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",max_vilte_ssac_retry_num,profile_normal.general_setting_normal.max_vilte_ssac_retry_num,OTA BY OP,no,no,no,yes,"OPPO requirement,Maximum number of ssac reselect retry number for vilte call",UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255:Maximum number of ssac reselect retry number for vilte call,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Pass,,,,
9491,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",max_volte_ssac_retry_num,profile_normal.general_setting_normal.max_volte_ssac_retry_num,OTA BY OP,no,no,no,yes,"OPPO requirement,Maximum number of ssac reselect retry number for volte call",UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255:Maximum number of ssac reselect retry number for volte call,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Pass,,,,
-9521,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_ENABLE_CUSTOM_TRESEL_THRESHOLD_FOR_LTE_CELL,modem_sbp_config[121].SBP_ENABLE_CUSTOM_TRESEL_THRESHOLD_FOR_LTE_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Custom Treselection Threshold decrease for LTE cells<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1:0 - False, 1 - True",,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-9522,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_SIM_INVALID_CAUSE_MAP_LIMIT,modem_sbp_config[121].SBP_EMM_SIM_INVALID_CAUSE_MAP_LIMIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Limit the consecutive attempts of mapping SIM invalid cause<BR>bit 0:0:Not limit<BR>bit 1:1:Limit<BR><BR>purpose: <BR>For an arrearage SIM, if network gives SIM invalid cause like #3, #6, #7, or #8 but UE maps these cause to non-SIM invalid cause like #15, it will causes more PLMN search procedure than expected on an arrearage SIM. Hence, to avoid power consumption issue, this is provided to control whether limit the consecutive attempts invalid cause mapping when one is received in LTE Attach Reject.<BR><BR>use timing:<BR>LTE attach reject cause handling<BR><BR>how to use:<BR>0: Don't limit the consecutive attempts of mapping SIM invalid cause<BR>1: Limit the consecutive attempts of mapping SIM invalid cause",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Don't limit the consecutive attempts of mapping SIM invalid cause.<BR>1:Limit the consecutive attempts of mapping SIM invalid cause.,,,,LTE Protocol (R13 Baseline),4G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] set NVRAM value to 1<BR>[Test Step]<BR>3 consecutvie LTE Attach Reject with cause #3, #6, #7, or #8.<BR>[Expected Result]<BR>Check if DUT won't perform Attach procedure after 3rd LTE Attach Reject",Pass,,,,
+9521,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_ENABLE_CUSTOM_TRESEL_THRESHOLD_FOR_LTE_CELL,modem_sbp_config[121].SBP_ENABLE_CUSTOM_TRESEL_THRESHOLD_FOR_LTE_CELL,OTA and OTA BY OP,no,no,no,yes,This SBP feature option is used to enable Custom Treselection Threshold decrease for LTE cells.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1:0 - False, 1 - True",,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+9522,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_SIM_INVALID_CAUSE_MAP_LIMIT,modem_sbp_config[121].SBP_EMM_SIM_INVALID_CAUSE_MAP_LIMIT,OTA and OTA BY OP,no,no,no,yes,"For an arrearage SIM, if network gives SIM invalid cause like #3, <BR>#6, #7, or #8 but UE maps these cause to non-SIM invalid cause <BR>like #15, it will causes more PLMN search procedure than expected <BR>on an arrearage SIM. Hence, to avoid power consumption issue, this <BR>is provided to control whether limit the consecutive attempts <BR>invalid cause mapping when one is received in LTE Attach Reject.<BR>This SBP takes effect on the following SBPs:<BR>SBP_NVRAM_MAP_EMM_CAUSE, <BR>SBP_EMM_CUST_MAP_EMM_CAUSE, <BR>SBP_HPLMN_REJ_CAUSE_7_8_MAPPING_TO_15, <BR>SBP_ROAMING_REJ_CAUSE_7_8_MAPPING_TO_15",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Don't limit the consecutive attempts of mapping SIM invalid cause.<BR>1:Limit the consecutive attempts of mapping SIM invalid cause.,,,This feature can be controlled by __ENABLE_EMM_SIM_INVALID_CAUSE_MAP_LIMIT__ option,LTE Protocol (R13 Baseline),4G,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] set NVRAM value to 1<BR>[Test Step]<BR>3 consecutvie LTE Attach Reject with cause #3, #6, #7, or #8.<BR>[Expected Result]<BR>Check if DUT won't perform Attach procedure after 3rd LTE Attach Reject",Pass,,,,
9523,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",ssac_rsrp_resel_th,ssac_rsrp_resel_th,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized RSRP threshold for SSAC cell reselection. (qdBm),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to -550,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
9524,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",ssac_rsrq_resel_th,ssac_rsrq_resel_th,OTA and OTA BY OP,no,no,no,no,[MCF][TIER1]Customized RSRQ threshold for SSAC cell reselection. (qdB),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 to -100,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
9525,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_hysteresis_interval,imc_config.oos_hysteresis_interval,OTA and OTA BY OP,no,no,no,no,"Hysteresis timer interval used for filtering short OOS/Out Of Service perios.<BR>OOSes shorter than the value are not indicated to IMCB, IMS REG and IMS UAs.<BR>Has an impact to OOS related parameters/features, for example, rereg_in_oos_end and oos_end_reset_tcp_client.<BR>unit: ms<BR>",UNSIGNED INT,4,,,1000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init] IMS registered in network which has "rereg_in_oos_end" setting enabled<BR>[Test Step] Cause AS re-establishments<BR>[Expected Result] Short AS re-establishment OOSes don't cause IMS registration refreshes,Pass,,,,
-9526,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_CUSTOMIZE_EHPLMN_BY_ICCID_FOR_ISSUE_SIM,modem_sbp_config[121].SBP_CUSTOMIZE_EHPLMN_BY_ICCID_FOR_ISSUE_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Add corresponding PLMN to EHPLMN by judge ICCID for issue SIM whose EHPLMN is set wrongly.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,This is SBP so RD IT/UT is enough,Pass,,,,
-9527,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_REJ_111_INC_ATTEMPT_CNT,modem_sbp_config[121].SBP_EMM_REJ_111_INC_ATTEMPT_CNT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When UE receiving attach/tau reject #111, UE increases the attach/tracking area updating attempt counter<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable.,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EMM_REJ_111_INC_ATTEMPT_CNT<BR>[Test Step]<BR>1. Power on and UE sent Attach request.<BR>2. NW sent Attach reject #111<BR>[Expected Result]<BR>After receving attach reject#111, UE started T3411(10s) and re-sent Attach request. when timeout.",Untested,,,,
+9526,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_CUSTOMIZE_EHPLMN_BY_ICCID_FOR_ISSUE_SIM,modem_sbp_config[121].SBP_CUSTOMIZE_EHPLMN_BY_ICCID_FOR_ISSUE_SIM,OTA and OTA BY OP,no,no,no,yes,"To handle some issue SIM whose EHPLMN is set wrongly, this SBP is added to do some optimization.<BR>By turning on this SBP, UE will judge the operator of SIM by its ICCID and add corresponding PLMN to EHPLMN.<BR>Note that this feature only support 3 operator - CMCC, CU, CT",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disable<BR>1: enable,,,N/A,MD Config,Modem - Customer Requirement,,,This is SBP so RD IT/UT is enough,Pass,,,,
+9527,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_REJ_111_INC_ATTEMPT_CNT,modem_sbp_config[121].SBP_EMM_REJ_111_INC_ATTEMPT_CNT,OTA and OTA BY OP,no,no,no,yes,"When UE reports NR related capability(ERRC layer), NW may send attach/TAU reject #111 to UE.<BR>To workaround this NW issue, EMM needs to help to let attempt counter not to be set max value and then UE could perfrom registration on LTE again.<BR>Then ERRC could report capability again.<BR>When this SBP is disable, UE follows the behavior which is definded in TS24.301.<BR>According to TS24.301, when UE receiving attach/tau reject #111, UE should set the attach/tracking area updating attempt counter to max value.<BR>When this SBP is enable, UE's behavior violates spec.<BR>When UE receiving attach/tau reject #111, UE increases the attach/tracking area updating attempt counter instead of setting to max value.<BR>It may also influence the searching/cell selection procedure and whether UE may disable eutra capability or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable.,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Enable SBP_EMM_REJ_111_INC_ATTEMPT_CNT<BR>[Test Step]<BR>1. Power on and UE sent Attach request.<BR>2. NW sent Attach reject #111<BR>[Expected Result]<BR>After receving attach reject#111, UE started T3411(10s) and re-sent Attach request. when timeout.",Pass,,,,
9528,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_block_in_remote_hold,ua_config.ect_block_in_remote_hold,OTA and OTA BY OP,no,no,no,no,Block explicit call transfer if target or transferee has been held by remote<BR>0: Disable<BR>1: Enable<BR>,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: Disabled<BR>1: Enabled,,,ect_enable,IMS,IMS,,,"Test in machine Y<BR>Test Time (minutes) 5<BR>[Init]<BR>UE A, UE B, UE C<BR>All VoLTE registered<BR>[Test Step]<BR>1. UE-A call UE-B, B accept the call<BR>2. UE-A call UE-C, C accept the call, UE -C hold the call<BR>3. UE-A choose transfer<BR>[Expected Result]<BR>Transfer fails.<BR>Call on hold between A and B / A and C.",Untested,,,,
9529,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_block_in_remote_hold.ect_block_in_remote_hold,ua_config.ect_block_in_remote_hold.ect_block_in_remote_hold,Not Support,no,no,no,no,Block explicit call transfer if target or transferee has been held by remote.<BR>0:Disabled<BR>1:Enabled<BR>bit 1:1:Enabled,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: Disabled 1: Enabled,,,ect_enable,IMS,IMS,,,"Test in machine Y<BR>Test Time (minutes) 5<BR>[Init]<BR>UE A, UE B, UE C<BR>All VoLTE registered<BR>[Test Step]<BR>1. UE-A call UE-B, B accept the call<BR>2. UE-A call UE-C, C accept the call, UE -C hold the call<BR>3. UE-A choose transfer<BR>[Expected Result]<BR>Transfer fails.<BR>Call on hold between A and B / A and C.",Untested,,,,
9530,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_delay_target_unhold,ua_config.ect_delay_target_unhold,OTA and OTA BY OP,no,no,no,no,Delay target unhold and +ECT URC final response sending if target has been held but a BYE from transferee is received before ECT has completed (sipfrag 200 OK has been received).<BR>If transfer target call release is received before timeout then send +ECT URC with ok status<BR>Default value 0 seconds<BR>,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-254:Timeout value in seconds. <BR>0: Don't start the timer,,,ect_enable,IMS,IMS,,,Test in machine Y<BR>Test Time (minutes) Y<BR>[Init]<BR>UE VoLTE registered<BR>[Test Step]<BR>Make VoLTE call to UeB.<BR>Make VoLTE call to UeC.<BR>Make Explicit Call Transfer<BR>[Expected Result]<BR>Explicit Call Transfer succeeds,Untested,,,,
9531,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_delay_target_unhold.ect_delay_target_unhold,ua_config.ect_delay_target_unhold.ect_delay_target_unhold,Not Support,no,no,no,no,Timeout value to delay target unhold and +ECT URC final response sending if target has been held but a BYE from transferee is received before ECT has completed. Unit: seconds.<BR>0: "Don't start the timer",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-254:Timeout value in seconds. <BR>0: Don't start the timer,,,ect_enable,IMS,IMS,,,Test in machine Y<BR>Test Time (minutes) Y<BR>[Init]<BR>UE VoLTE registered<BR>[Test Step]<BR>Make VoLTE call to UeB.<BR>Make VoLTE call to UeC.<BR>Make Explicit Call Transfer<BR>[Expected Result]<BR>Explicit Call Transfer succeeds,Untested,,,,
-9532,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_DISABLE_SS_WHEN_DATA_OFF,modem_sbp_config[121].SBP_DISABLE_SS_WHEN_DATA_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Control if implementing SS when data off<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR> Test Time (minutes) 1 min<BR> [Init]<BR> enable SBP_DISABLE_SS_WHEN_DATA_OFF__<BR> [Test Step]<BR> 1.insert CMCC volte card<BR> 2.turn off data option<BR> 3.query CFU<BR> [Expected Result]<BR> CFU fail.,Pass,,,,
-9533,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM does TAU for RAT mode change from 45G to 4G<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable,,,__EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G__,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
-9534,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[86].SBP_HSDPA_CAT,modem_sbp_data_config[86].SBP_HSDPA_CAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>HSDPA UE Category.<BR>bit 24:24:HSDPA UE category: 24",BIT,8,,8,0x67,NR15.R3.MD700.IVT.MP1MR3.MP,,0-29:HSDPA Category,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes) <BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-9535,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[87].SBP_HSUPA_CAT,modem_sbp_data_config[87].SBP_HSUPA_CAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>HSUPA UE Category.<BR>bit 7:7:HSUPA UE category: 7<BR>",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-9536,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_DISABLE_4G5_EVALUATE_PING_PONG_CHECK,modem_sbp_config[121].SBP_DISABLE_4G5_EVALUATE_PING_PONG_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR diable 4G5 ping-pong evaluate check<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+9532,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_DISABLE_SS_WHEN_DATA_OFF,modem_sbp_config[121].SBP_DISABLE_SS_WHEN_DATA_OFF,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE will disable SS when data off and report NO-CONNECTION(+CME ERROR:845) to AP.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,This feature is controlled by __DISABLE_SS_WHEN_DATA_OFF__ flag,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR> Test Time (minutes) 1 min<BR> [Init]<BR> enable SBP_DISABLE_SS_WHEN_DATA_OFF__<BR> [Test Step]<BR> 1.insert CMCC volte card<BR> 2.turn off data option<BR> 3.query CFU<BR> [Expected Result]<BR> CFU fail.,Pass,,,,
+9533,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,modem_sbp_config[121].SBP_EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G,OTA and OTA BY OP,no,no,no,yes,"R15 defines UE uses TAU to update UE radio capability. In some network,<BR>network may need long time to reply TAU-ACCPET when UE radio capability<BR>changed from with 45G to with 4G (without 5G). It may have better <BR>performance with detach/attach to update UE radio capabilty in such network.<BR>This SBP only take effect when R15 feature UE radio capability update through TAU is on.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled.<BR>0:Disable,,,This feature can be controlled by __EMM_R15_SET_RAT_NO_DETACH_NOT_APPLY_FOR_45G_TO_4G__ option,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
+9534,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[86].SBP_HSDPA_CAT,modem_sbp_data_config[86].SBP_HSDPA_CAT,OTA and OTA BY OP,no,no,no,yes,This SBP specifies the HSDPA UE category.,BIT,8,,8,0x67,NR15.R3.MD700.IVT.MP1MR3.MP,,0-29:HSDPA Category,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes) <BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+9535,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[87].SBP_HSUPA_CAT,modem_sbp_data_config[87].SBP_HSUPA_CAT,OTA and OTA BY OP,no,no,no,yes,This SBP specifies the HSUPA UE category.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+9536,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_DISABLE_4G5_EVALUATE_PING_PONG_CHECK,modem_sbp_config[121].SBP_DISABLE_4G5_EVALUATE_PING_PONG_CHECK,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, UE would disable NR 4G5 ping-pong evaluate check.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
9537,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",bypass_403_reason_phrase,ua_config.bypass_403_reason_phrase,OTA and OTA BY OP,no,no,no,no,If enabled REGISTER 403 response reason phrase content is not checked. If disabled REGISTER 403 response reason phrase text is expected to contain 'Forbidden' text string.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1 enabled<BR>any:values and format please reference to param. description,,,Affect how not_auto_reg_403 handling works with different reason phrase parameter values.,IMS,IMS,,,"[Init] UE attached in LTE<BR>[Test Step] enable VoLTE, and network respond to IMS register with 403 with reason phrase other than "forbidden"<BR>[Expected Result] <BR> enable: IMS register is attempted again.<BR> disable: 403 is handled as fatal error response. No IMS register re-attempt if not_autoreg_403 feature is enabled.",Untested,,,,
9538,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",bypass_403_reason_phrase.bypass_403_reason_phrase,ua_config.bypass_403_reason_phrase.bypass_403_reason_phrase,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>If enabled REGISTER 403 response reason phrase content is not checked. If disabled REGISTER 403 response reason phrase text is expected to contain 'Forbidden' text string.<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>,BIT,8,,8,0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1:0 disabled<BR>1 enabled,,,Affect how not_auto_reg_403 handling works with different reason phrase parameter values.,IMS,IMS,,,"[Init] UE attached in LTE<BR>[Test Step] enable VoLTE, and network respond to IMS register with 403 with reason phrase other than "forbidden"<BR>[Expected Result] <BR> enable: IMS register is attempted again.<BR> disable: 403 is handled as fatal error response. No IMS register re-attempt if not_autoreg_403 feature is enabled.<BR>",Untested,,,,
9539,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_usage_for_last_pcscf,ua_config.pcscf_usage_for_last_pcscf,OTA and OTA BY OP,no,no,no,no,This parameter is used to control which PCSCF address is used for new initial registration when last remaining PCSCF is in used and UE get INVITE 504 with registration restoration XML content.<BR>value 0: UE trigger new PCSCF list recovery procesure A and trigger new intial registration to the new PCSCF address provided by netwok.<BR>value 1: UE trigger new inital registration to the same PCSCF address PCSCF address if it is the last one in use.,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1 enabled<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] UE IMS registered<BR>[Test Step] Make VoLTE call and network responds with 504 with registration restoration suggestion to the INVITE.<BR>[Expected Result] <BR> enabled: UE trigger new initial registration to the same PCSCF address if it is the last one in use.<BR> disabled: UE trigger new PCSCF list recovery procedure and trigger new initial registration to the new PCSCF address provided by network.,Untested,,,,
@@ -8899,20 +8899,20 @@
9541,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_incall_voice_cap_pref,ipol_ans_cfg.ipol_ims_incall_voice_cap_pref,OTA and OTA BY OP,no,no,no,no,"[MCF]When enable, IMS call will select RAT which has voice capability rather than RAT no voice capability(e.g. VOPS OFF)<BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0: off<BR>1: on,,,,IMS,IMS,,,1. make IMS registration<BR>2. make IMS call<BR>3. Call will stay on the target RAT which have voice capability<BR>,Pass,,,,
9542,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",squal,performance.est_th.squal,OTA and OTA BY OP,no,no,no,no,Squal threshold to determine serving quality is good for cell reselection related enhancement,SHORT,2,,,3,NR15.R3.MD700.IVT.MP1MR3.MP,,invalid: 0x7FFF:Squal,,,,MD Config,Modem - Customer Requirement,,,[Pre-condition]<BR>(1) no SIM<BR>(2) one EMC support cell A and one non-EMC support cell B<BR>(3) turn on cell A and turn off cell B<BR><BR>[Step]<BR>(1) UE camps on EMC support cell A<BR>(2) weaker cell A's signal and turn on cell B<BR>(3) UE could reselect to cell B,Untested,,,,
9543,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",srxlev,performance.est_th.srxlev,OTA and OTA BY OP,no,no,no,no,Srxlev threshold to determine serving quality is good for cell reselection related enhancement,SHORT,2,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,invalid: 0x7FFF:Srxlev,,,,MD Config,Modem - Customer Requirement,,,[Pre-condition]<BR>(1) no SIM<BR>(2) one EMC support cell A and one non-EMC support cell B<BR>(3) turn on cell A and turn off cell B<BR><BR>[Step]<BR>(1) UE camps on EMC support cell A<BR>(2) weaker cell A's signal and turn on cell B<BR>(3) UE could reselect to cell B,Untested,,,,
-9544,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_CONFIG_CA_COMB_BY_SBPID,modem_sbp_config[122].SBP_CONFIG_CA_COMB_BY_SBPID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable configure CA combination by SBP ID<BR>bit 0:0:Disable feature - configure CA combination by SBP ID <BR>bit 1:1:Enable feature - configure CA combination by SBP ID",BIT,1,,1,bit: 0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable feature<BR>1:Enable feature,,,__SBP_CONFIG_CA_COMB_BY_SBPID__,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time 10<BR>[Init]follow MCF RD IT initial steps<BR>[Test Step]<BR>change value from 0 to 1<BR>change value from 1 to 0<BR>[Expected Result]<BR>Value changes in MCF dump,Untested,,,,
-9545,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_DO_EMERGENCY_ATTACH_WHEN_T3402_IS_RUNNING,modem_sbp_config[122].SBP_DO_EMERGENCY_ATTACH_WHEN_T3402_IS_RUNNING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Peform emergency attach for emergency service when T3402 is running<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-9546,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delete LTE Stored SIBs when entering flight mode<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] <BR>Enable SBP <BR>Attach on LTE.<BR>Flight mode ON/OFF<BR>[Expected Result] <BR>DUT attach to LTE cell.<BR>All SIB are read again,Pass,,,,
-9547,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SEARCH_NEXT_WHEN_VPLMN_VOPS_NOT_SUPPORT_UE_IN_LTE_ONLY_MODE,modem_sbp_config[122].SBP_SEARCH_NEXT_WHEN_VPLMN_VOPS_NOT_SUPPORT_UE_IN_LTE_ONLY_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When UE is in LTE only mode and VPLMN does not support VoPS, search next PLMN directly<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes)<BR>[Init]<BR>Power on UE, enable SBP.<BR>[Test Step]<BR>1. UE is in LTE only mode.<BR>2. UE register over LTE network with VOPS not support.<BR><BR>[Expected Result]<BR>UE should search next PLMN",Pass,,,,
+9544,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_CONFIG_CA_COMB_BY_SBPID,modem_sbp_config[122].SBP_CONFIG_CA_COMB_BY_SBPID,OTA and OTA BY OP,no,no,no,yes,"User can configure the CA combination by different SBPID. Once user wants to change the CA combination by SBP ID, he can enable this SBP and add relevant setting in sbp_nvram_errc_config.c. Take TWN for example, only enable CA combination <BR>3CA;3CC;7CA;7CC;8BA;3AA-28AA when SBPID = TWN. Add configuration in function- nvram_custom_config_errc_para as following.<BR><BR>if(sbp_id == 108) //for TWN <BR>{char ca_list[]= {"3CA;3CC;7CA;7CC;8BA;3AA-28AA"};<BR>nvram_ef_errc_custom_ca_comb_list_struct* p_custom_ca_list;<BR>p_custom_ca_list =get_ctrl_buffer(NVRAM_EF_ERRC_CUSTOM_CA_COMB_LIST_SIZE);<BR>memset(p_custom_ca_list,0,NVRAM_EF_ERRC_CUSTOM_CA_COMB_LIST_SIZE);<BR>strcpy(&p_custom_ca_list->white_list[0],&ca_list[0]);<BR>nvram_custom_set_errc_ca_comb_white_list(sim_slot_id,ps_id,&p_custom_ca_list->white_list[0]);<BR>free_ctrl_buffer(p_custom_ca_list);<BR>}",BIT,1,,1,bit: 0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable feature<BR>1:Enable feature,,,The setting of this SBP could be set to "enable" by defining compile option __SBP_CONFIG_CA_COMB_BY_SBPID__ in the makefile,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time 10<BR>[Init]follow MCF RD IT initial steps<BR>[Test Step]<BR>change value from 0 to 1<BR>change value from 1 to 0<BR>[Expected Result]<BR>Value changes in MCF dump,Untested,,,,
+9545,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_DO_EMERGENCY_ATTACH_WHEN_T3402_IS_RUNNING,modem_sbp_config[122].SBP_DO_EMERGENCY_ATTACH_WHEN_T3402_IS_RUNNING,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enable, it means that UE would peform emergency attach for emergency service when T3402 is running.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP could be enabled by defining compile option SBP_DO_EMERGENCY_ATTACH_WHEN_T3402_IS_RUNNING in the makefile,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+9546,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,modem_sbp_config[121].SBP_LTE_DEL_STORED_SIBS_WHEN_FLIGHT,OTA and OTA BY OP,no,no,no,yes,Option provided to delete Stored System information in LTE when entering flight mode.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:1,,,"if compile option __LTE_DEL_STORED_SIBS_WHEN_FLIGHT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] <BR>Enable SBP <BR>Attach on LTE.<BR>Flight mode ON/OFF<BR>[Expected Result] <BR>DUT attach to LTE cell.<BR>All SIB are read again,Pass,,,,
+9547,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SEARCH_NEXT_WHEN_VPLMN_VOPS_NOT_SUPPORT_UE_IN_LTE_ONLY_MODE,modem_sbp_config[122].SBP_SEARCH_NEXT_WHEN_VPLMN_VOPS_NOT_SUPPORT_UE_IN_LTE_ONLY_MODE,OTA and OTA BY OP,no,no,no,yes,"When the SBP is ON, UE will search next PLMN when UE is in LTE only mode and VPLMN does not support VoPS.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This SBP can be controlled by compile option __SEARCH_NEXT_WHEN_VPLMN_VOPS_NOT_SUPPORT_UE_IN_LTE_ONLY_MODE__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes)<BR>[Init]<BR>Power on UE, enable SBP.<BR>[Test Step]<BR>1. UE is in LTE only mode.<BR>2. UE register over LTE network with VOPS not support.<BR><BR>[Expected Result]<BR>UE should search next PLMN",Pass,,,,
9548,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[89].SBP_FLIGHT_MODE_ECC_3GPP_SEARCH_RAT,modem_sbp_data_config[89].SBP_FLIGHT_MODE_ECC_3GPP_SEARCH_RAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>search rat order of 3GPP for flight mode ECC<BR>bit 0:0:0: disabled<BR>bit 1:1:1: LNWG",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,00,,,,(Sprint) E911,OP Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>1. Power on and enter flight mode<BR>2. make ECC<BR>[Expected Result]<BR>UE should start searching on LTE,Untested,,,,
-9549,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[88].SBP_POS_MODE_NR_CAPABILITY_SWITCH,modem_sbp_data_config[88].SBP_POS_MODE_NR_CAPABILITY_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Switch the positioning mode in UE reporting NR AGPS/AGNSS positioning capability to NW.<BR>bit 0:0:UE does not support AGPS/AGNSS<BR>bit 1:1:UE-Based<BR>bit 2:2:UE-Assisted<BR>bit 3:3:Both UE-Based and UE-Assisted",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,3:bit 0:0:UE does not support AGPS/AGNSS<BR>bit 1:1:UE-Based<BR>bit 2:2:UE-Assisted<BR>bit 3:3:Both UE-Based and UE-Assisted,,,,LCS for LTE and EPS - CPS (LPP-e Control Plane),4G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 5 min<BR>[Init] <BR>[Test Step] Test AGPS related testing on NR<BR>[Expected Result] Check LPP capabilities report,Untested,,,,
+9549,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[88].SBP_POS_MODE_NR_CAPABILITY_SWITCH,modem_sbp_data_config[88].SBP_POS_MODE_NR_CAPABILITY_SWITCH,OTA and OTA BY OP,no,no,no,yes,This SBP can switch the positioning mode in UE reporting NR AGPS/AGNSS positioning capability to NW.,BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,3:bit 0:0:UE does not support AGPS/AGNSS<BR>bit 1:1:UE-Based<BR>bit 2:2:UE-Assisted<BR>bit 3:3:Both UE-Based and UE-Assisted,,,N/A,LCS for LTE and EPS - CPS (LPP-e Control Plane),4G,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 5 min<BR>[Init] <BR>[Test Step] Test AGPS related testing on NR<BR>[Expected Result] Check LPP capabilities report,Untested,,,,
9550,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",guard_normal_scan_timer_length,profile_common.guard_normal_scan_timer_length,OTA BY OP,no,no,no,yes,The length of normal scan timer during ecc session,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:guard normal scan timer length,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. Register normal service<BR>3. dial call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Untested,,,,
9551,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",wait_esfb_irat_timer_length,profile_common.wait_esfb_irat_timer_length,OTA BY OP,no,no,no,yes,The length of wait for esfb irat timer during ecc session,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:wait esfb irat timer length,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. Register normal service<BR>3. dial call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Untested,,,,
9552,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",prefer_normal_scan_when_ecc_fail,profile_emerg.prefer_normal_scan_when_ecc_fail,OTA BY OP,no,no,no,yes,"Prefer normal scan when ecc fail (0:only limit, 1:prefer normal)",UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not prefer normal scan when ecc fail<BR>1:prefer normal scan when ecc fail,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step] <BR>1. Modify the MCF value and power on<BR>2. Register normal service<BR>3. dial call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Untested,,,,
-9553,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_NWSEL_REPORT_ECAMPUI_IND,modem_sbp_config[122].SBP_NWSEL_REPORT_ECAMPUI_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NWSEL will report ECAMPUI to AP for showing icon when camp on.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,This is SBP so RD IT/UT is enough,Pass,,,,
-9554,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_PSONLY_RAS_ENABLED,modem_sbp_config[106].SBP_PSONLY_RAS_ENABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To enable PS ONLY RAS<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0- Disable RAS for PS only call<BR>1- Enable RAS for PS only call,,,No dependency,WCDMA RAS,MTK Proprietary,,,Move to DCH and check if RAS is disabled for PS only call,Untested,,,,
+9553,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_NWSEL_REPORT_ECAMPUI_IND,modem_sbp_config[122].SBP_NWSEL_REPORT_ECAMPUI_IND,OTA and OTA BY OP,no,no,no,yes,"For power on case including flight mode on/off and SIM plug out/in., modem will report ECAMPUI when UE camp on a cell which is attach successfully before.<BR>AP will show RAT icon according to ECAMPUI first but do not consider UE as attach successfully. The purpose of this feature is to shorten the RAT icon showing time for power on case.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This SBP can be controlled by compile option __NWSEL_REPORT_ECAMPUI_IND__,MD Config,Modem - Customer Requirement,,,This is SBP so RD IT/UT is enough,Pass,,,,
+9554,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[106].SBP_PSONLY_RAS_ENABLED,modem_sbp_config[106].SBP_PSONLY_RAS_ENABLED,OTA and OTA BY OP,no,no,no,yes,This SBP IS TO ENABLE PS ONLY RAS.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0- Disable RAS for PS only call<BR>1- Enable RAS for PS only call,,,N/A,WCDMA RAS,MTK Proprietary,,,Move to DCH and check if RAS is disabled for PS only call,Untested,,,,
9555,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_isim,xcap_info.support_isim,OTA and OTA BY OP,no,no,no,no,Support ISIM Card<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,XCAP IMS-SS,XCAP,,,"This test only can do in RD IT to check whether the XCAP work fine when the ISIM has incorrect content.<BR>Test in machine (Y/N) N<BR>Test Time (minutes) 5<BR>[Init]<BR>insert SIM card has ISIM, but ISIM content is incorrect.<BR>[Test Step]<BR>1. Config this option to "Disable";<BR>2. Query call forwarding service.<BR>[Expected Result]<BR>Query Call forwarding service could work fine.",Pass,,,,
9556,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_isim.support_isim,xcap_info.support_isim.support_isim,Not Support,no,no,no,no,Support ISIM<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
-9557,2117,NVRAM_EF_IWLAN_N3CF_PROFILE_LID,"1,2",send_del_ike_auth_ntfy_err,n3cf_cfg.send_del_ike_auth_ntfy_err,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>send_del_ike_auth_ntfy_err: 8 "Send delete IKEv2 SA after specific notify error" <BR>0: "Disable";<BR>1: "Enable";<BR><BR><BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:"Disable"<BR>1:"Enable",,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Untested,,,,
+9557,2117,NVRAM_EF_IWLAN_N3CF_PROFILE_LID,"1,2",send_del_ike_auth_ntfy_err,n3cf_cfg.send_del_ike_auth_ntfy_err,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>send_del_ike_auth_ntfy_err: 8 "Send delete IKEv2 SA after specific notify error" <BR>0: "Disable";<BR>1: "Enable";<BR><BR><BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:"Disable"<BR>1:"Enable",,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Pass,,,,
9558,2117,NVRAM_EF_IWLAN_N3CF_PROFILE_LID,"1,2",send_del_ike_auth_ntfy_err.send_del_ike_auth_ntfy_err,n3cf_cfg.send_del_ike_auth_ntfy_err.send_del_ike_auth_ntfy_err,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>Send delete IKEv2 SA after specific notify error<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0 or 1:true false,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Untested,,,,
9565,2370,NVRAM_EF_MRS_OPERATOR_FEATURE_TABLE_LID,1,feature,entry[0~99].feature,Not Support,no,no,no,yes,Operator Feature,UNSIGNED CHAR,1,,,0x08,NR15.R3.MD700.IVT.MP1MR3.MP,,"1,2,4,8,16,32",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Untested,,,,
9566,2370,NVRAM_EF_MRS_OPERATOR_FEATURE_TABLE_LID,1,feature.OP_FEATURE_GSM_SUNSET,entry[0~99].feature.OP_FEATURE_GSM_SUNSET,OTA,no,no,no,yes,Operator Feature<BR>GSM Sunset<BR>bit 0:0:No<BR>bit 1:1:Yes,BIT,1,,1,"1,1,1,1,1,1,1,1,0,1,0,1,1,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
@@ -8933,7 +8933,7 @@
9621,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,is_valid,is_valid,OTA,no,no,no,yes,"[MCF,RUNTIME]Validity of this VG roaming configuration",ENUM,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,KAL_TRUE/KAL_FALSE,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Untested,,,,
9622,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,num_of_disabled_entry,num_of_disabled_entry,OTA,no,no,no,yes,"[MCF,RUNTIME]Number of valid entries in disabled_list",UNSIGNED INT,4,,,"0x02, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,0~30,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Untested,,,,
9623,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,num_of_excepted_entry,num_of_excepted_entry,OTA,no,no,no,yes,"[MCF,RUNTIME]Number of valid entries in excepted_list",UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~30,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Untested,,,,
-9632,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_ERRC_DYNAMIC_NR_CAP_ADJUST,modem_sbp_config[122].SBP_ERRC_DYNAMIC_NR_CAP_ADJUST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable ENDC/NR IRAT EUTRA capability reporting when abnormal network behavior is detected.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0:disabled<BR>1:enabled,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+9632,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_ERRC_DYNAMIC_NR_CAP_ADJUST,modem_sbp_config[122].SBP_ERRC_DYNAMIC_NR_CAP_ADJUST,OTA and OTA BY OP,no,no,no,yes,UE disable ENDC/NR IRAT EUTRA capability reporting when abnormal network behavior is detected.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0:disabled<BR>1:enabled,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
9633,60944,NVRAM_EF_ERRC_ENH_CUSTOM_CARRIER_LID,"1,2",enh_priority_band_th,enh_priority_band_th,OTA and OTA BY OP,no,no,no,no,[MCF]band rssi threshold to apply enhanced priroity band,SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (30minutes)<BR>[Init] Set cell A band X, cell B band Y, cell C band Z. And, set NVRAM priority band X=Y > Z for this operator. Also set cell A, B, C freq as predefined freq. Set cell power cell C > cell B > cell A.<BR>[Test Step] Power on after 3 cells are ready. <BR>[Expected Result] First camp on cell B.",Untested,,,,
9634,60944,NVRAM_EF_ERRC_ENH_CUSTOM_CARRIER_LID,"1,2",band_list,priority_band_inf[0~19].band_list,OTA and OTA BY OP,no,no,no,no,band list,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
9635,60944,NVRAM_EF_ERRC_ENH_CUSTOM_CARRIER_LID,"1,2",band_num,priority_band_inf[0~19].band_num,OTA and OTA BY OP,no,no,no,no,band num.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -8966,7 +8966,7 @@
9918,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_adc_calibrate_enable,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_adc_calibrate_enable,OTA,no,no,yes,no,drdi adc calibrate enable - no used,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9919,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_adc_level_total,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_adc_level_total,OTA,no,no,yes,no,drdi adc level total for debug,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9920,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_adc_max_input_voltage,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_adc_max_input_voltage,OTA,no,no,yes,no,drdi adc max input voltage for debug,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-9921,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_adc_meas_count_2_order,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_adc_meas_count_2_order,OTA,no,no,yes,no,adc_meas_count_2_order,UNSIGNED SHORT,2,,,7,NR15.R3.MD700.IVT.MP1MR3.MP,,7,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+9921,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_adc_meas_count_2_order,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_adc_meas_count_2_order,OTA,no,no,yes,no,adc_meas_count_2_order,UNSIGNED SHORT,2,,,7,NR15.R3.MD700.IVT.MP1MR3.MP,,7,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
9922,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_ADC_nums_in_calc,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_ADC_nums_in_calc,OTA,no,no,yes,no,drdi adc set nums,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9923,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_adc_set_nums,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_adc_set_nums,OTA,no,no,yes,no,drdi adc set nums,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
9924,1220,NVRAM_EF_MML1_CUSTOM_DYNAMIC_INIT_LID,1,mml1_custom_barcode_digit_value_1,mml1_drdi_dynamic_init.mml1_custom_param.mml1_custom_barcode_digit_value_1,OTA,no,no,yes,no,barcode digit value - phase out,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
@@ -9043,8 +9043,8 @@
10088,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,rb_case_idx,factory.force_dump_iq.rb_case_idx,OTA,no,no,yes,no,,UNSIGNED INT,4,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
10089,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,rb_location_lp_idx,factory.force_dump_iq.rb_location_lp_idx,OTA,no,no,yes,no,,UNSIGNED INT,4,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
10090,57364,NVRAM_EF_NL1_ET_DEBUG_PARA_LID,1,tx_lp_idx,factory.force_dump_iq.tx_lp_idx,OTA,no,no,yes,no,,UNSIGNED INT,4,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10091,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SAT_SET_IMS_REGISTRATION_PROFILE,modem_sbp_config[122].SBP_SAT_SET_IMS_REGISTRATION_PROFILE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Additionally setting IMS Registration bit in sat profile<BR>bit 0:0:Keep as default<BR>bit 1:1:Additionally set",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. CTC card's terminal profile is 20 bytes of -0xFF with the rest bytes of 0x00.,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10092,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[90].SBP_SET_AS_REL_5G_DISABLE,modem_sbp_data_config[90].SBP_SET_AS_REL_5G_DISABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>accessStratumRelease report to NW when 5G is disable<BR>bit 1:1:AccessStratumRelease_rel9<BR>bit 2:2:AccessStratumRelease_rel10<BR>bit 3:3:AccessStratumRelease_rel11<BR>bit 4:4:AccessStratumRelease_rel12<BR>bit 5:5:AccessStratumRelease_rel13<BR>bit 6:6:AccessStratumRelease_rel14<BR>bit 7:7:AccessStratumRelease_rel15<BR>bit 255:255:AccessStratumRelease no need change",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0x06:AccessStratumRelease_rel14<BR>0x07:AccessStratumRelease_rel15<BR>0xff:AccessStratumRelease no need change<BR>0x04:AccessStratumRelease_rel12<BR>0x03:AccessStratumRelease_rel11<BR>0x01:AccessStratumRelease_rel9<BR>0x02:AccessStratumRelease_rel10<BR>0x05:AccessStratumRelease_rel13,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init] Set value to 0x05 (AccessStratumRelease_rel13)<BR>[Test Step] Turn off NR capability<BR>[Expected Result] Check AS release downgrade from R15 to R13,Pass,,,,
+10091,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SAT_SET_IMS_REGISTRATION_PROFILE,modem_sbp_config[122].SBP_SAT_SET_IMS_REGISTRATION_PROFILE,OTA,no,no,no,yes,"With the option on, device will additionally set the IMS Registration bit in sat profile.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable. CTC card's terminal profile is 20 bytes of -0xFF with the rest bytes of 0x00.,,,N/A,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+10092,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[90].SBP_SET_AS_REL_5G_DISABLE,modem_sbp_data_config[90].SBP_SET_AS_REL_5G_DISABLE,OTA and OTA BY OP,no,no,no,yes,This SBP allow to decide which accessStratumRelease will report to NW when 5G is disable.,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0x06:AccessStratumRelease_rel14<BR>0x07:AccessStratumRelease_rel15<BR>0xff:AccessStratumRelease no need change<BR>0x04:AccessStratumRelease_rel12<BR>0x03:AccessStratumRelease_rel11<BR>0x01:AccessStratumRelease_rel9<BR>0x02:AccessStratumRelease_rel10<BR>0x05:AccessStratumRelease_rel13,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init] Set value to 0x05 (AccessStratumRelease_rel13)<BR>[Test Step] Turn off NR capability<BR>[Expected Result] Check AS release downgrade from R15 to R13,Pass,,,,
10093,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pingpong_prefer_endc_rsrp_thresh,pingpong_prefer_endc_rsrp_thresh,OTA and OTA BY OP,no,no,no,no,[MCF]Customized RSRP threshold for pingpong judge prefer endc cell. (qdBm),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int16,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10094,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pingpong_prefer_endc_rsrq_thresh,pingpong_prefer_endc_rsrq_thresh,OTA and OTA BY OP,no,no,no,no,[MCF]Customized RSRQ threshold for pingpong judge prefer endc cell. (qdB),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int16,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10110,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",bad_cell_watch_period,scg_bar_info.bad_cell_watch_period,OTA and OTA BY OP,no,no,no,no,"SCG cell observed valid timer, if expiry, recalulate SCG failure at the cell",UNSIGNED SHORT,2,,,0x0a,NR15.R3.MD700.IVT.MP1MR3.MP,,int,,,,Gaming optimization for weak signal,MTK Proprietary,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
@@ -9123,67 +9123,67 @@
10244,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",mnc2,positive_list.plmn_list[0~19].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,0-9:MNC2 value.,,,,MD Config,Modem - Customer Requirement,,,No test plan.,Pass,,,,
10245,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",mnc3,positive_list.plmn_list[0~19].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,0-9:MNC3 value.,,,,MD Config,Modem - Customer Requirement,,,No test plan.,Pass,,,,
10246,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",plmn_num,positive_list.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 20),UNSIGNED CHAR,1,,,0x08,NR15.R3.MD700.IVT.MP1MR3.MP,,1-20:Number of entries in the PLMN list.,,,,MD Config,Modem - Customer Requirement,,,No test plan.,Pass,,,,
-10258,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,band_ind,rf_sar_tx_power_offset_by_band[0~34].band_ind,OTA,no,no,no,no,Do not change this setting,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:LTE_Band ENUM,,,no,SAR TX Power offset,SAR Mitigation,,,Update MCF fields and see if NVRAM values are changed accordingly.,Untested,,,,
-10259,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,tx_power_max_value,rf_sar_tx_power_offset_by_band[0~34].table[0~11].tx_power_max_value,OTA,no,no,no,no,unit for custom to input: 1/8 dB -> value '8' = 1 dB,CHAR,N,N,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,no,SAR TX Power offset,SAR Mitigation,,,Update MCF fields and see if NVRAM values are changed accordingly.,Pass,,,,
+10258,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,band_ind,rf_sar_tx_power_offset_by_band[0~34].band_ind,OTA,no,no,no,no,Do not change this setting,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:LTE_Band ENUM,,,no,SAR Mitigation,RF_Proprietary,,,Update MCF fields and see if NVRAM values are changed accordingly.,Untested,,,,
+10259,60494,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_LID,1,tx_power_max_value,rf_sar_tx_power_offset_by_band[0~34].table[0~11].tx_power_max_value,OTA,no,no,no,no,unit for custom to input: 1/8 dB -> value '8' = 1 dB,CHAR,N,N,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,no,SAR Mitigation,RF_Proprietary,,,Update MCF fields and see if NVRAM values are changed accordingly.,Pass,,,,
10278,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_invite_to_18x_timer_timeout,ua_config.mo_invite_to_18x_timer_timeout,OTA and OTA BY OP,no,no,no,no,Configuration to trigger csfb if 18x not received in time after having sent INVITE<BR>0:Disable<BR>Unit:sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"1~255: timer value, unit: sec<BR>0:Disable",,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10280,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,band,sar_2rgn_db[0~59].sar_2rgn_node[0~1].band,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,2,,,MMRF_UNI_BANDNONE,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10281,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,rat,sar_2rgn_db[0~59].sar_2rgn_node[0~1].rat,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,1,,,MMRF_UNI_RAT_INVAILD,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10282,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,phy_ant_index,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx0.phy_ant_index,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10283,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,scenario_setting_index,sar_2rgn_db[0~N].sar_2rgn_node[0~N].sar_tbl_ant_comb[0~N].sar_tbl_ant_comb_node_tx0.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {1~99},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10284,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,phy_ant_index,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx1.phy_ant_index,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10285,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,scenario_setting_index,sar_2rgn_db[0~N].sar_2rgn_node[0~N].sar_tbl_ant_comb[0~N].sar_tbl_ant_comb_node_tx1.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum:{1~99},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10286,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,token,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].token,OTA,no,no,yes,no,NR SAR ENDC table,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~0XFFFFFFFF,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10287,57375,NVRAM_EF_NL1_SAR_SCENARIO_DB_LID,1,sar_tbl_ant,sar_scenario_setting_db[0~N].sar_tbl_ant,OTA,no,no,yes,no,NR SAR scenario setting,UNSIGNED CHAR,N,N,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10288,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,band,sar_1rgn_db[0~29].sar_1rgn_node.band,OTA,no,no,yes,no,NR SAR SA table,ENUM,2,,,MMRF_UNI_BANDNONE,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10289,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,rat,sar_1rgn_db[0~29].sar_1rgn_node.rat,OTA,no,no,yes,no,NR SAR SA table,ENUM,1,,,MMRF_UNI_RAT_INVAILD,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10290,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,phy_ant_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx0.phy_ant_index,OTA,no,no,yes,no,NR SAR SA table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10291,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,scenario_setting_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx0.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {1~99},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10292,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,phy_ant_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx1.phy_ant_index,OTA,no,no,yes,no,NR SAR SA table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10293,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,scenario_setting_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx1.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {1~99},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10294,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,token,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].token,OTA,no,no,yes,no,NR only SAR table <BR>this is one parameter :token,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"auto calculate, customer need not to fill",,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10280,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,band,sar_2rgn_db[0~59].sar_2rgn_node[0~1].band,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,2,,,MMRF_UNI_BANDNONE,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10281,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,rat,sar_2rgn_db[0~59].sar_2rgn_node[0~1].rat,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,1,,,MMRF_UNI_RAT_INVAILD,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10282,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,phy_ant_index,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx0.phy_ant_index,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10283,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,scenario_setting_index,sar_2rgn_db[0~N].sar_2rgn_node[0~N].sar_tbl_ant_comb[0~N].sar_tbl_ant_comb_node_tx0.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {1~99},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10284,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,phy_ant_index,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx1.phy_ant_index,OTA,no,no,yes,no,NR SAR ENDC table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10285,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,scenario_setting_index,sar_2rgn_db[0~N].sar_2rgn_node[0~N].sar_tbl_ant_comb[0~N].sar_tbl_ant_comb_node_tx1.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum:{1~99},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10286,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,token,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].token,OTA,no,no,yes,no,NR SAR ENDC table,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~0XFFFFFFFF,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10287,57375,NVRAM_EF_NL1_SAR_SCENARIO_DB_LID,1,sar_tbl_ant,sar_scenario_setting_db[0~N].sar_tbl_ant,OTA,no,no,yes,no,NR SAR scenario setting,UNSIGNED CHAR,N,N,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10288,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,band,sar_1rgn_db[0~29].sar_1rgn_node.band,OTA,no,no,yes,no,NR SAR SA table,ENUM,2,,,MMRF_UNI_BANDNONE,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10289,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,rat,sar_1rgn_db[0~29].sar_1rgn_node.rat,OTA,no,no,yes,no,NR SAR SA table,ENUM,1,,,MMRF_UNI_RAT_INVAILD,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10290,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,phy_ant_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx0.phy_ant_index,OTA,no,no,yes,no,NR SAR SA table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10291,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,scenario_setting_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx0.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {1~99},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10292,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,phy_ant_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx1.phy_ant_index,OTA,no,no,yes,no,NR SAR SA table,ENUM,1,,,MMRFD_ANT_INDEX_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~11},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10293,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,scenario_setting_index,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx1.scenario_setting_index,OTA,no,no,yes,no,The index of scenario DB,ENUM,N,,,MML1_CUSTOM_SAR_TBL_SCENARIO_SETTING_0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {1~99},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10294,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,token,sar_1rgn_db[0~29].sar_1rgn_node.sar_tbl_ant_comb[0~29].token,OTA,no,no,yes,no,NR only SAR table <BR>this is one parameter :token,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"auto calculate, customer need not to fill",,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
10297,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mcc1,ampr_mcc_list[0~11].mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,"0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x05, 0x03, 0xff",NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xff,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10298,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mcc2,ampr_mcc_list[0~11].mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,"0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x03,0x07,0x04,0x00,0xff",NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xff,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10299,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mcc3,ampr_mcc_list[0~11].mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,"0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x00,0x06,0x04,0x02,0xff",NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xff,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10300,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mnc1,ampr_mcc_list[0~11].mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,"0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff",NR15.R3.MD700.IVT.MP1MR3.MP,,0xff,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10301,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mnc2,ampr_mcc_list[0~11].mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,"0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff",NR15.R3.MD700.IVT.MP1MR3.MP,,0xff,,,,MD Config,Modem - Customer Requirement,,,Test in machine N,Untested,,,,
10302,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",mnc3,ampr_mcc_list[0~11].mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,"0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff",NR15.R3.MD700.IVT.MP1MR3.MP,,0xff,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10303,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_3G_BEARER_IND_ONLY_FOR_ORANGE,modem_sbp_config[123].SBP_3G_BEARER_IND_ONLY_FOR_ORANGE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Only for orange operater requirement<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10304,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_4G_ICON_DCHSPA_CAPABLE_CELL_FOR_AIRTEL,modem_sbp_config[123].SBP_4G_ICON_DCHSPA_CAPABLE_CELL_FOR_AIRTEL,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Show 4G Icon for Airtel DC-HSPA capable cell in SWA region<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10305,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_ACCEPT_EMM_SH_INTG_PRT_NEWSECCTXT_FOR_NAS_MSGS_OTHR_THAN_SMC,modem_sbp_config[126].SBP_ACCEPT_EMM_SH_INTG_PRT_NEWSECCTXT_FOR_NAS_MSGS_OTHR_THAN_SMC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Allow security header type integrity protection with new security context for NAS messages other than SMC<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10306,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_ANT_BAR_SPEC_FOR_TW5,modem_sbp_config[123].SBP_ANT_BAR_SPEC_FOR_TW5,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ant Bar Spec for TAIWAN with full bar 5<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10307,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_BAR_BY_MULTI_SCG_FAILURES,modem_sbp_config[124].SBP_BAR_BY_MULTI_SCG_FAILURES,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Multi SCG failure occured, bar the cell<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,Gaming optimization for weak signal,MTK Proprietary,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10308,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_C2K_FORBIDDEN_FOR_NON_CHINA_SIM,modem_sbp_config[123].SBP_C2K_FORBIDDEN_FOR_NON_CHINA_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>C2K only available on CT sim<BR>bit 0:0:No<BR>bit 1:1:Yes<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,,,,,"Not necessary, this field is always disable on NR15.R3.MP.",Untested,,,,
-10309,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_DELAY_URLC_RESET_PDU_DURING_REESTABLISHMENT,modem_sbp_config[124].SBP_DELAY_URLC_RESET_PDU_DURING_REESTABLISHMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delay URLC Reset PDU during TX Re-establishment<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10310,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_DISABLE_CELL_SEL_MODE_II_DURING_CSFB_STORED_CELL_SEL,modem_sbp_config[126].SBP_DISABLE_CELL_SEL_MODE_II_DURING_CSFB_STORED_CELL_SEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable cell selection mode II for CSFB redirection<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10311,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not reset 2G RR SI2Q parameter when SI13 change_mark indicates there is SI change<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step] Send SI2 Q with 3G neghbours. Send classmark change in SI13 and do not send SI2 Q again<BR>[Expected Result]Reselect to 3G,Pass,,,,
-10312,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_ENDC_DISABLE_NR_B1_DURING_VOLTE,modem_sbp_config[126].SBP_ENDC_DISABLE_NR_B1_DURING_VOLTE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>For ENDC mode, when VoLTE call is ongoing, disable reporting of NR B1 event.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-10313,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_FAKE_DEACTIVATE_PDN_FOR_WIFI_HANDOVER,modem_sbp_config[123].SBP_FAKE_DEACTIVATE_PDN_FOR_WIFI_HANDOVER,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Fake PDN deactivation for wifi handover procedure<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>FDN check for Data service<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:FDN check for Data service<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Enabled for TITAN projects<BR>Enable the FDN and do a PDN activation<BR>Verify if the FDN is enabled or not,Pass,,,,
-10315,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_FOP_SETTING_ONLY_FOR_H3G,modem_sbp_config[122].SBP_FOP_SETTING_ONLY_FOR_H3G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>FOP setting for H3G operater requirement<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,"Not necessary, this field is always disable on NR15.R3.MP.",Untested,,,,
-10316,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform re-selection first if connection establish ever fail<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-10317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_INVALID_SIM_RECOVERY,modem_sbp_config[123].SBP_INVALID_SIM_RECOVERY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Recover invalid SIM to camp on network<BR>bit 0:0:Disable SIM recovery<BR>bit 1:1:Enable SIM recovery<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MCF (Modem Configuration Framework),MCF,,,,Untested,,,,
-10318,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_INCR_NET_SCAN_SUPPORT,modem_sbp_config[124].SBP_IPCA_INCR_NET_SCAN_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MD does not support Incremental Network Scan<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1<BR>0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10319,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_NW_MODE_EXTEND_FOR_ANDROID_O,modem_sbp_config[124].SBP_IPCA_NW_MODE_EXTEND_FOR_ANDROID_O,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Add EVDO enum in NW mode for Android O<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10320,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_IPCA_NW_REDUCE_REG_INFO_IN_SLEEP_MODE,modem_sbp_config[123].SBP_IPCA_NW_REDUCE_REG_INFO_IN_SLEEP_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Custom reduce IPC reg_info NOTI when screen off<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10321,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_PH_LOCK_PAGING_IGNORE,modem_sbp_config[124].SBP_IPCA_PH_LOCK_PAGING_IGNORE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore the paging when phone lock<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10322,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_L4C_INVALID_ECELL_INFO_WHEN_ENTER_OOS,modem_sbp_config[125].SBP_L4C_INVALID_ECELL_INFO_WHEN_ENTER_OOS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Modem invalidate the nbr cell info when enter OOS<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Disable: 0<BR>Enable: 1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10323,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_LTE_DEL_STORED_SIBS_WHEN_SIM_INSERT,modem_sbp_config[124].SBP_LTE_DEL_STORED_SIBS_WHEN_SIM_INSERT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delete LTE Stored SIBs when Insert SIM Card<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,[0:1],,,,MD Config,Modem - Customer Requirement,,,1. Enable this SBP and do LTE camp on procedure<BR>2. Remove SIM.<BR>3. Insert SIM and do LTE camp on procedure again<BR>4. Check UE doesn't use the stored SIB as camp on information,Untested,,,,
-10324,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_NR_DCI_IN_MEAS_GAP_WORKAROUND,modem_sbp_config[125].SBP_NR_DCI_IN_MEAS_GAP_WORKAROUND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>If enabled, when SCG NR cell sends DCI in measurement gap is detected and UL resource is very limited to consume pending data, UE will remove SCG<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0 > disable<BR>1 > enable,,,No,MD Config,Modem - Customer Requirement,,,Network abnormal workaround<BR>find gNB where does not give RV0 for new Tx.<BR>,Pass,,,,
-10325,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_NR_PLMN_BASED_BAND_41_AMPR,modem_sbp_config[126].SBP_NR_PLMN_BASED_BAND_41_AMPR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Band41 AMPR<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>Value can be changed by using __SBP_NR_PLMN_BASED_BAND_41_AMPR_DISABLE__",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10326,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_NWSEL_PRIORITIZE_RPLMN_WHEN_RPLMN_IN_HPLMN,modem_sbp_config[125].SBP_NWSEL_PRIORITIZE_RPLMN_WHEN_RPLMN_IN_HPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Prioritize RPLMN to search first when RPLMN is in HPLMN<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
-10327,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_ONLINE_BOOTING,modem_sbp_config[123].SBP_ONLINE_BOOTING,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Online booting support<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10328,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_PDN_TAU_COLLISION_NOT_SET_ACTIVE_FLAG,modem_sbp_config[126].SBP_PDN_TAU_COLLISION_NOT_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE will not set the 'active' flag if PDN collision with TAU<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,D-SBP,SBP,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10329,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_REJECT_IRRDT_E2UG_AFTER_RECEIVING_REJECT_CAUSE13,modem_sbp_config[124].SBP_REJECT_IRRDT_E2UG_AFTER_RECEIVING_REJECT_CAUSE13,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE would reject to redirect to 2G3G after receiving TAU reject cause13<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,D-SBP,SBP,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10330,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_SAT_CTC_CUSTOMIZED_TERMINAL_PROFILE,modem_sbp_config[124].SBP_SAT_CTC_CUSTOMIZED_TERMINAL_PROFILE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To use full or partial 0xFF Terminal Profile for CTC cards<BR>bit 0:0:Disable. CTC card's terminal profile is all bytes of 0xFF.<BR>bit 1:1:Enable. CTC card's terminal profile is 20 bytes of 0xFF with rest bytes of 0x00.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable. CTC card's terminal profile is all bytes of 0xFF.,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10331,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_SAT_REISSUE_SIM_REFRESH_DURING_ECC,modem_sbp_config[126].SBP_SAT_REISSUE_SIM_REFRESH_DURING_ECC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>block REFRESH during ECBM mode, reissues after ECBM mode end<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N): Y<BR><BR>[Init]<BR>UE registered to LTE NW<BR><BR>[Test Step]<BR>1.Make ECC call<BR>2. End Call<BR>3. Simulate SIM refresh. It should happen before ECBM timer expiry (usually 5 minutes)<BR><BR>[Expected Result]<BR>If SBP enabled<BR>1. UE should reject the REFRESH and there should be no NW detach<BR>2. UE may reissue the stored REFRESH once ECBM timer expires,Untested,,,,
-10332,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SAT_SEND_STATUS_AFTER_90TR_UNTIL_PLI_IMEI,modem_sbp_config[122].SBP_SAT_SEND_STATUS_AFTER_90TR_UNTIL_PLI_IMEI,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Additionally send STATUS after TR with 9000, until SIM card queries IMEI<BR>bit 0:0:Disable. Don't additionally send STATUS<BR>bit 1:1:Enable. Additionally send STATUS<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable. Don't additionally send STATUS after TR with 9000.,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10333,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE to support IMS-Roaming in Modem Modules<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:UE to support IMS-Roaming in Modem Modules<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported,,,,MD Config,Modem - Customer Requirement,,,"Switch on the device<BR>For VZW operator, the SBP is ON by default<BR>Make sure the the SIM card is in roaming condition<BR>Check if the IMS PDN activation is successful",Pass,,,,
-10334,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_SHORT_T3417EXT_OPTMZ_FOR_CSFB_AFTR_VOLTE_CALL_FAILURE,modem_sbp_config[126].SBP_SHORT_T3417EXT_OPTMZ_FOR_CSFB_AFTR_VOLTE_CALL_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Control MTK optimizaion where T3417ext is started with 4sec for CSFB after VoLTE call failure<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10335,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_TITAN_SKIP_IMEI_VERIFICATION,modem_sbp_config[125].SBP_TITAN_SKIP_IMEI_VERIFICATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip Titan's IMEI verification<BR>bit 0:0:Disable: Will check IMEI<BR>bit 1:1:Enable: Skip it<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10336,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_TREAT_PLMN_FROM_IMSI_AS_EHPLMN,modem_sbp_config[125].SBP_TREAT_PLMN_FROM_IMSI_AS_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>If EHPLMN is present and does not contain the PLMN of IMSI, we would treat the PLMN of IMSI as HPLMN<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
-10337,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[93].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,modem_sbp_data_config[93].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>backoff time of VGSM to avoid 4G5 MOD collision<BR>bit 0:0:No backoff time<BR>bit 1:1:1 second<BR>bit 2:2:2 seconds<BR>bit 3:3:3 seconds<BR>bit 4:4:4 seconds<BR>bit 5:5:5 seconds",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~5:The backoff time in 5G to ignore the MO/MT PDU session modification collision. Default value is 2.,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>(1) establish PDN in 4G<BR>(2) 4G5, UE initiated PDU session modification to update capability<BR>(3) MO/MT PDU session modification collision (collide with NW's MT modification)<BR><BR>[Expected Result]<BR>This backoff timer can ignore the collision probability.",Pass,,,,
+10303,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_3G_BEARER_IND_ONLY_FOR_ORANGE,modem_sbp_config[123].SBP_3G_BEARER_IND_ONLY_FOR_ORANGE,Not Support,no,no,no,yes,Only for orange operater requirement,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10304,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_4G_ICON_DCHSPA_CAPABLE_CELL_FOR_AIRTEL,modem_sbp_config[123].SBP_4G_ICON_DCHSPA_CAPABLE_CELL_FOR_AIRTEL,Not Support,no,no,no,yes,Show 4G Icon for Airtel DC-HSPA capable cell in SWA region,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10305,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_ACCEPT_EMM_SH_INTG_PRT_NEWSECCTXT_FOR_NAS_MSGS_OTHR_THAN_SMC,modem_sbp_config[126].SBP_ACCEPT_EMM_SH_INTG_PRT_NEWSECCTXT_FOR_NAS_MSGS_OTHR_THAN_SMC,OTA and OTA BY OP,no,no,no,yes,This SBP is to control allowing NAS message other than SMC with secuirty header type Integrity protection with new security context <BR><BR>N/A,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"To enable this feature, compile option __ACCEPT_EMM_SH_INTG_PRT_NEWSECCTXT_FOR_NAS_MSGS_OTHR_THAN_SMC__ must be defined.",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10306,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_ANT_BAR_SPEC_FOR_TW5,modem_sbp_config[123].SBP_ANT_BAR_SPEC_FOR_TW5,OTA and OTA BY OP,no,no,no,yes,Ant Bar Spec for TAIWAN with full bar 5,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10307,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_BAR_BY_MULTI_SCG_FAILURES,modem_sbp_config[124].SBP_BAR_BY_MULTI_SCG_FAILURES,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, multi SCG failures occured, bar the cell.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,This feature is controlled by __DISABLE_BAR_BY_MUTIL_SCG_FAILURES__ flag,Gaming optimization for weak signal,MTK Proprietary,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10308,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_C2K_FORBIDDEN_FOR_NON_CHINA_SIM,modem_sbp_config[123].SBP_C2K_FORBIDDEN_FOR_NON_CHINA_SIM,OTA and OTA BY OP,no,no,no,yes,C2K only available on CT sim,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,,,,,"Not necessary, this field is always disable on NR15.R3.MP.",Untested,,,,
+10309,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_DELAY_URLC_RESET_PDU_DURING_REESTABLISHMENT,modem_sbp_config[124].SBP_DELAY_URLC_RESET_PDU_DURING_REESTABLISHMENT,OTA and OTA BY OP,no,no,no,yes,"During data session , CS call is initiated and network configured CS domain RBs along with PS RB reestablishment.<BR>Invalid ACK SUFI is received from network hence URLC reset pdu is triggered which overlap with TX reestablishment procedure , consequently it changes the HFN and desync happen with UE and network.<BR>So we will delay URLC Reset PDU during TX Re-establishment. <BR>If the SBP is on,UE will delay URLC Reset PDU during TX Re-establishment in order to avoid HFN desync.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,"if compile option __DELAY_URLC_RESET_PDU_DURING_REESTABLISHMENT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Pass,,,,
+10310,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_DISABLE_CELL_SEL_MODE_II_DURING_CSFB_STORED_CELL_SEL,modem_sbp_config[126].SBP_DISABLE_CELL_SEL_MODE_II_DURING_CSFB_STORED_CELL_SEL,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+10311,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,modem_sbp_config[126].SBP_DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13,OTA and OTA BY OP,no,no,no,yes,"Every time the SI changes, the MS does not get the complete SI2Quater, which causes the RRM to not correctly decode the SI2Quater.<BR>when SI13 indicate to recollect all SI, the SI2quater information received before should be cleared to make sure the recollection is normal .",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,Feature could be enabled by enabling compiler option __DISABLE_SI2Q_RESET_WHEN_UPDATE_IN_CHANGE_MARK_OF_SI13__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N): Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step] Send SI2 Q with 3G neghbours. Send classmark change in SI13 and do not send SI2 Q again<BR>[Expected Result]Reselect to 3G,Pass,,,,
+10312,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_ENDC_DISABLE_NR_B1_DURING_VOLTE,modem_sbp_config[126].SBP_ENDC_DISABLE_NR_B1_DURING_VOLTE,OTA and OTA BY OP,no,no,no,yes,"For EN-DC mode, when VoLTE call is ongoing, disable reporting of NR B1 event to prevent from unexpected connection release or 4G5 handover(may call drop). <BR><BR>Feature only takes effect only when SA is disabled at this project(or flavor)",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+10313,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_FAKE_DEACTIVATE_PDN_FOR_WIFI_HANDOVER,modem_sbp_config[123].SBP_FAKE_DEACTIVATE_PDN_FOR_WIFI_HANDOVER,Not Support,no,no,no,yes,Fake PDN deactivation for wifi handover procedure,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,modem_sbp_config[125].SBP_FDN_CHECK_FOR_DATA_SERIVCE,OTA and OTA BY OP,no,no,no,yes,Enable or Disable FDN check for Data service,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:FDN check for Data service<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Enabled for TITAN projects<BR>Enable the FDN and do a PDN activation<BR>Verify if the FDN is enabled or not,Pass,,,,
+10315,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_FOP_SETTING_ONLY_FOR_H3G,modem_sbp_config[122].SBP_FOP_SETTING_ONLY_FOR_H3G,OTA and OTA BY OP,no,no,no,yes,Do FOP setting (EGTYPE=3) for H3G,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,N/A,MD Config,Modem - Customer Requirement,,,"Not necessary, this field is always disable on NR15.R3.MP.",Untested,,,,
+10316,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,modem_sbp_config[125].SBP_FORCE_RESEL_IF_EST_EVER_FAIL,OTA and OTA BY OP,no,no,no,yes,"If re-selection has triggered during connection establish before, and connection establish <BR>ever fail/rejected, after that, perform re-seleciton first",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+10317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_INVALID_SIM_RECOVERY,modem_sbp_config[123].SBP_INVALID_SIM_RECOVERY,OTA and OTA BY OP,no,no,no,yes,Recover invalid SIM to camp on network,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MCF (Modem Configuration Framework),MCF,,,,Untested,,,,
+10318,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_INCR_NET_SCAN_SUPPORT,modem_sbp_config[124].SBP_IPCA_INCR_NET_SCAN_SUPPORT,OTA and OTA BY OP,no,no,no,yes,IPCA_CFG reports that MD supports Incremental Network Scan to AP,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1<BR>0,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+10319,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_NW_MODE_EXTEND_FOR_ANDROID_O,modem_sbp_config[124].SBP_IPCA_NW_MODE_EXTEND_FOR_ANDROID_O,OTA and OTA BY OP,no,no,no,yes,Add EVDO enum in NW mode for Android O,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10320,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_IPCA_NW_REDUCE_REG_INFO_IN_SLEEP_MODE,modem_sbp_config[123].SBP_IPCA_NW_REDUCE_REG_INFO_IN_SLEEP_MODE,OTA and OTA BY OP,no,no,no,yes,Online booting support,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10321,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_IPCA_PH_LOCK_PAGING_IGNORE,modem_sbp_config[124].SBP_IPCA_PH_LOCK_PAGING_IGNORE,OTA,no,no,no,yes,This SBP is to send the AT+PGCHECK from IPCA to ignore the paging when phone is locked.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0: disable<BR>1: enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+10322,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_L4C_INVALID_ECELL_INFO_WHEN_ENTER_OOS,modem_sbp_config[125].SBP_L4C_INVALID_ECELL_INFO_WHEN_ENTER_OOS,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Disable: 0<BR>Enable: 1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10323,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_LTE_DEL_STORED_SIBS_WHEN_SIM_INSERT,modem_sbp_config[124].SBP_LTE_DEL_STORED_SIBS_WHEN_SIM_INSERT,OTA and OTA BY OP,no,no,no,yes,Option provided to delete Stored System information in LTE when Insert SIM Card.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,[0:1],,,"if compile option __LTE_DEL_STORED_SIBS_WHEN_SIM_INSERT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,1. Enable this SBP and do LTE camp on procedure<BR>2. Remove SIM.<BR>3. Insert SIM and do LTE camp on procedure again<BR>4. Check UE doesn't use the stored SIB as camp on information,Untested,,,,
+10324,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_NR_DCI_IN_MEAS_GAP_WORKAROUND,modem_sbp_config[125].SBP_NR_DCI_IN_MEAS_GAP_WORKAROUND,OTA and OTA BY OP,no,no,no,yes,"If enabled, when SCG NR cell sends DCI in measurement gap is detected and UL resource is very limited to consume pending data, UE will remove SCG",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0 > disable<BR>1 > enable,,,N/A,MD Config,Modem - Customer Requirement,,,Network abnormal workaround<BR>find gNB where does not give RV0 for new Tx.<BR>,Pass,,,,
+10325,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_NR_PLMN_BASED_BAND_41_AMPR,modem_sbp_config[126].SBP_NR_PLMN_BASED_BAND_41_AMPR,OTA and OTA BY OP,no,no,no,yes,"This feature is used to control if UE supports Band41 AMPR Feature.<BR>If this feature is enabled, UE supports Band41 AMPR feature for certain PLMN.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,User could use compile option __SBP_NR_PLMN_BASED_BAND_41_AMPR_DISABLE__ to switch the setting of this SBP.,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10326,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_NWSEL_PRIORITIZE_RPLMN_WHEN_RPLMN_IN_HPLMN,modem_sbp_config[125].SBP_NWSEL_PRIORITIZE_RPLMN_WHEN_RPLMN_IN_HPLMN,OTA and OTA BY OP,no,no,no,yes,"For the SIM card with many HPLMNs, if UE or SIM is configure to search begin from HPLMN, UE need to search from the first HPLMN <BR>even though RPLMN is in one of HPLMNs. It caused UE to get normal service slower. Customer requires that in such scenario, <BR>prioritize the RPLMN, which is one of HPLMNs, to search first to improve the performance.<BR>Risk: The SBP may violate the SPEC 23.122 chapter 4.4.3, "When attempting to select a network the highest priority EHPLMN that is available shall be selected."<BR>Considering the risk, when test SIM or test mode, the SBP is useless. <BR>SBP ON: if UE or SIM is configured to search begin from HPLMN, and RPLMN is one of HPLMNs, prioritize RPLMN to search first.<BR>SBP OFF: just follow the original HPLMNs search order.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,"if compile option __NWSEL_PRIORITIZE_RPLMN_WHEN_RPLMN_IN_HPLMN__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
+10327,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[123].SBP_ONLINE_BOOTING,modem_sbp_config[123].SBP_ONLINE_BOOTING,Not Support,no,no,no,yes,Online booting support,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10328,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_PDN_TAU_COLLISION_NOT_SET_ACTIVE_FLAG,modem_sbp_config[126].SBP_PDN_TAU_COLLISION_NOT_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"When UE want to perform TAU and IMS PDN establishment, UE will perform TAU with active flag first then send PDN request in connected. However, CT network didn't response this PDN request in connected.<BR>If enabled this SBP, UE will not set 'active' flag if PDN conflict with TAU, let UE perform PDN establishment from idle mode.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,User could use compile option __SBP_PDN_TAU_COLLISION_NOT_SET_ACTIVE_FLAG__ to switch the setting of this SBP.,D-SBP,SBP,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+10329,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_REJECT_IRRDT_E2UG_AFTER_RECEIVING_REJECT_CAUSE13,modem_sbp_config[124].SBP_REJECT_IRRDT_E2UG_AFTER_RECEIVING_REJECT_CAUSE13,OTA and OTA BY OP,no,no,no,yes,"The UE would start timer T3440 when receiving TAU reject cause#13, which is a timer for UE to wait NW to release the connection between them. During the timer is running, PLMN search procedure would not be started at the first place when receiving TAU reject#13. Thus, the UE redirect to 23G if NW sent a connection release with redirect info to the UE right after the TAU reject.<BR>If enable this SBP, UE would ignore the redirect info from the NW after receiving TAU reject cause#13, and the UE shall try to do PLMN search on LTE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,This feature can be enabled by __SBP_REJECT_IRRDT_E2UG_AFTER_RECEIVING_REJECT_CAUSE13__ flag,D-SBP,SBP,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10330,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_SAT_CTC_CUSTOMIZED_TERMINAL_PROFILE,modem_sbp_config[124].SBP_SAT_CTC_CUSTOMIZED_TERMINAL_PROFILE,OTA,no,no,no,yes,"If the feature is enabled, CTC card's terminal profile will be 20 bytes of 0xFF with other bytes of 0x00. Otherwise, CTC card's terminal profile will be all bytes of 0xFF.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable. CTC card's terminal profile is all bytes of 0xFF.,,,N/A,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+10331,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_SAT_REISSUE_SIM_REFRESH_DURING_ECC,modem_sbp_config[126].SBP_SAT_REISSUE_SIM_REFRESH_DURING_ECC,OTA and OTA BY OP,no,no,no,yes,"This SBP blocks REFRESH during ECC, reissues after ECC end",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N): Y<BR><BR>[Init]<BR>UE registered to LTE NW<BR><BR>[Test Step]<BR>1.Make ECC call<BR>2. End Call<BR>3. Simulate SIM refresh. It should happen before ECBM timer expiry (usually 5 minutes)<BR><BR>[Expected Result]<BR>If SBP enabled<BR>1. UE should reject the REFRESH and there should be no NW detach<BR>2. UE may reissue the stored REFRESH once ECBM timer expires,Untested,,,,
+10332,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[122].SBP_SAT_SEND_STATUS_AFTER_90TR_UNTIL_PLI_IMEI,modem_sbp_config[122].SBP_SAT_SEND_STATUS_AFTER_90TR_UNTIL_PLI_IMEI,OTA,no,no,no,yes,"In order to trigger SIM card to query IMEI for IMEI pairing, this feature is to additionally STATUS command after a TERMINAL RESPONSE without further command. After SIM card queries IMEI, we will stop sending such SATTUS command.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable. Don't additionally send STATUS after TR with 9000.,,,N/A,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+10333,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,modem_sbp_config[125].SBP_SET_IMS_ROAMING_SUPPORT_ALWAYS_ON,OTA and OTA BY OP,no,no,no,yes,UE to support IMS-Roaming in Modem Modules.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:UE to support IMS-Roaming in Modem Modules<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported,,,N/A,MD Config,Modem - Customer Requirement,,,"Switch on the device<BR>For VZW operator, the SBP is ON by default<BR>Make sure the the SIM card is in roaming condition<BR>Check if the IMS PDN activation is successful",Pass,,,,
+10334,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[126].SBP_SHORT_T3417EXT_OPTMZ_FOR_CSFB_AFTR_VOLTE_CALL_FAILURE,modem_sbp_config[126].SBP_SHORT_T3417EXT_OPTMZ_FOR_CSFB_AFTR_VOLTE_CALL_FAILURE,OTA and OTA BY OP,no,no,no,yes,This SBP is control MTK optimizaion where T3417ext is started with 4sec for CSFB after VoLTE call failure,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"To disable this feature, compile option __DISABLE_SHORT_T3417EXT_OPTMZ_FOR_CSFB_AFTR_VOLTE_CALL_FAILURE__ must be defined.",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10335,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_TITAN_SKIP_IMEI_VERIFICATION,modem_sbp_config[125].SBP_TITAN_SKIP_IMEI_VERIFICATION,OTA and OTA BY OP,no,no,no,yes,"This SBP controls Titan's IMEI verification function. If enabled, the IMEI verification is<BR>skipped. If disabled IMEI verification will be performed. By default this SBP is enabled.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10336,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[125].SBP_TREAT_PLMN_FROM_IMSI_AS_EHPLMN,modem_sbp_config[125].SBP_TREAT_PLMN_FROM_IMSI_AS_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"According to TS 23.122, if the EHPLMN list is present and not empty, the entries in the EHPLMN list are used in the network selection procedure.<BR>However, some SIM cards may be configured with wrong EHPLMN list which result in UE could not search the expected HPLMN directly. Also, UI will <BR>not show HOME even though UE registered to the expected HPLMN. In such scenario, if customer want to treat the PLMN of IMSI as HPLMN, could turn on the SBP.<BR>When the SBP is ON, if EHPLMN list is present and does not contain the PLMN of IMSI, we would treat the PLMN of IMSI as HPLMN. <BR>Please note that the SBP may violate spec and it does not work when using test SIM or in test mode.<BR>Also, the SBP will affect the dual IMSI SIM card with the same above behavior.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This feature can be enabled by compile option __TREAT_PLMN_FROM_IMSI_AS_EHPLMN__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
+10337,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[93].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,modem_sbp_data_config[93].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,OTA and OTA BY OP,no,no,no,yes,"If a PDU session interworking from 4G to 5G, it must need to update capability to 5G by PDU session modification procedure if it's the first contact to 5G of this PDU session.<BR><BR>There's high chance that it would collide with MT modification procedure initiated by NW.<BR><BR>To enhance the flow, we create this backoff timer to try to avoid the collision.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~5:The backoff time in 5G to ignore the MO/MT PDU session modification collision. Default value is 2.,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) <BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>(1) establish PDN in 4G<BR>(2) 4G5, UE initiated PDU session modification to update capability<BR>(3) MO/MT PDU session modification collision (collide with NW's MT modification)<BR><BR>[Expected Result]<BR>This backoff timer can ignore the collision probability.",Pass,,,,
10338,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[91].SBP_IDC_GNSSPWR_EN,modem_sbp_data_config[91].SBP_IDC_GNSSPWR_EN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable lte powerback at B13, 14 with Gps on<BR>bit 0:0:IDC GNSSPWR disable<BR>bit 1:1:IDC GNSSPWR enable",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00, 0x01",,,,In-Device Coexistence (IDC),Cross CONSYS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10339,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[92].SBP_IDC_IM_TX_PWR_FOR_GPS,modem_sbp_data_config[92].SBP_IDC_IM_TX_PWR_FOR_GPS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Set LTE max Tx power when IDC is enabled<BR>bit 1:1:TX_PWR_1<BR>bit 2:2:TX_PWR_2<BR>bit 3:3:TX_PWR_3<BR>bit 4:4:TX_PWR_4<BR>bit 5:5:TX_PWR_5<BR>bit 6:6:TX_PWR_6<BR>bit 7:7:TX_PWR_7<BR>bit 8:8:TX_PWR_8<BR>bit 9:9:TX_PWR_9<BR>bit 10:10:TX_PWR_10<BR>bit 11:11:TX_PWR_11<BR>bit 12:12:TX_PWR_12<BR>bit 13:13:TX_PWR_13<BR>bit 14:14:TX_PWR_14<BR>bit 15:15:TX_PWR_15<BR>bit 16:16:TX_PWR_16<BR>bit 17:17:TX_PWR_17<BR>bit 18:18:TX_PWR_18<BR>bit 19:19:TX_PWR_19<BR>bit 20:20:TX_PWR_20<BR>bit 21:21:TX_PWR_21<BR>bit 22:22:TX_PWR_22<BR>bit 23:23:TX_PWR_23",BIT,8,,8,0x11,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 1~23,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10339,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[92].SBP_IDC_IM_TX_PWR_FOR_GPS,modem_sbp_data_config[92].SBP_IDC_IM_TX_PWR_FOR_GPS,OTA and OTA BY OP,no,no,no,yes,"The value is applied to LTE Tx max power after IDC notifies lte Band 13, and GPS ON",BIT,8,,8,0x11,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 1~23,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10340,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[94].SBP_TX_PCMAX_OFFSET,modem_sbp_data_config[94].SBP_TX_PCMAX_OFFSET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable PCMAX adjustment in LTE SA and ENDC scenario<BR>bit 0:0:Adjustment disable<BR>bit 1:1:Adjustment enable",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
10341,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_media_when_not_support_media,xcap_info.remove_media_when_not_support_media,OTA and OTA BY OP,no,no,no,no,remove media when media_tag is false<BR>0: Disabled<BR>1: Enabled<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled<BR>int:0~1,,,,XCAP IMS-SS,XCAP,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>10<BR>[Init]<BR>insert CT volte card<BR>[Test Step]<BR>set CFU<BR>[Expected Result]<BR>the CFU UE put doesn't contain media element.,Pass,,,,
10342,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_media_when_not_support_media.support_isim,xcap_info.remove_media_when_not_support_media.support_isim,Not Support,no,no,no,no,Remove media when media_tag=false<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
@@ -9229,28 +9229,28 @@
10384,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,vg_option.VG_OPTION4,excepted_list[0~99].vg_option.VG_OPTION4,OTA,no,no,no,yes,Bitmap of 5G option to be excepted<BR>VG_OPTION4<BR>bit 0:0:Not excepted<BR>bit 1:1:Excepted,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10385,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,vg_option.VG_OPTION5,excepted_list[0~99].vg_option.VG_OPTION5,OTA,no,no,no,yes,Bitmap of 5G option to be excepted<BR>VG_OPTION5<BR>bit 0:0:Not excepted<BR>bit 1:1:Excepted,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10386,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,vg_option.VG_OPTION7,excepted_list[0~99].vg_option.VG_OPTION7,OTA,no,no,no,yes,Bitmap of 5G option to be excepted<BR>VG_OPTION7<BR>bit 0:0:Not excepted<BR>bit 1:1:Excepted,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10387,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_GAS_ENABLE_SIM_PROTECT_FOR_ELEVATOR_MODE_AFR,modem_sbp_config[127].SBP_GAS_ENABLE_SIM_PROTECT_FOR_ELEVATOR_MODE_AFR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Session will not be protected to reseve the resources<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10388,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G,modem_sbp_config[127].SBP_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Handle pending SS transaction as CSFB after IRAT to 4G<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,To enable compilation option __ENABLE_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G__is required,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 30 mins <BR>[Init] DUT boot up <BR>[Test Step->Active RAT LTE<BR>->Trigger call Forwarding when in LTE<BR>->CSFB to 23G<BR>->UE able to camp on 23G cell<BR>-> First CISS transaction of the call Forwarding successful<BR>Observe that each transaction goes via a CSFB,Pass,,,,
-10389,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_TELSTRA_BAND_PRIORITY_SEARCH,modem_sbp_config[127].SBP_TELSTRA_BAND_PRIORITY_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>TELSTRA Band Priority Search<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10390,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_UE_CAP_DSS_PLMN_SUPPORTED_BAND_TABLE,modem_sbp_config[127].SBP_UE_CAP_DSS_PLMN_SUPPORTED_BAND_TABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>White/Black list of DSS feature: PLMN ID/NR band<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10391,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_XID_CMD_BY_FAULTY_NW_RECOV,modem_sbp_config[127].SBP_XID_CMD_BY_FAULTY_NW_RECOV,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To Enable optimization where Faulty NW sends many XID commands within short duration <BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0: SBP disabled. XID optimization Disabled<BR>0x1: SBP Enabled. XID optimization Available.,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): 10<BR>[Init] Set 2G only mode<BR>[Test Step]Inject ~15 XID messages from Machine within 5 seconds, and dont send any Pkt UL ACK Nack from machne during that time<BR>[Expected Result] DUT should ignore XID messages after 10 XID requests.",Pass,,,,
+10387,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_GAS_ENABLE_SIM_PROTECT_FOR_ELEVATOR_MODE_AFR,modem_sbp_config[127].SBP_GAS_ENABLE_SIM_PROTECT_FOR_ELEVATOR_MODE_AFR,OTA and OTA BY OP,no,no,no,yes,"During the Elvatore mode, before initiating the AFR, Every time Session will be protected to reserve the resources which is causing the performence issue with the peer sim.<BR>To avoid this SBP is used. For elevator mode AFR, Session will be protected only when the SBP is enabled.<BR>.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,Feature could be enabled by enabling compiler option __GAS_ENABLE_SIM_PROTECT_FOR_ELEVATOR_MODE_AFR__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+10388,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G,modem_sbp_config[127].SBP_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G,OTA and OTA BY OP,no,no,no,yes,"When SBP is enabled, On IRAT to LTE, MM shall handle the pending SS transaction as CSFB request.<BR>When SBP is disabled, If MM has pending SS transaction and IRAT to 4G occur, UE shall reject the IRAT and<BR>handle the pending SS transaction in legacy 23G RAT.<BR>This customization shall be disabled by default for FTA mode and test SIM case",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,This feature can be enabled by __ENABLE_MM_TRY_PENDING_SS_AS_CSFB_AFTER_IRAT_TO_4G__ flag,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 30 mins <BR>[Init] DUT boot up <BR>[Test Step->Active RAT LTE<BR>->Trigger call Forwarding when in LTE<BR>->CSFB to 23G<BR>->UE able to camp on 23G cell<BR>-> First CISS transaction of the call Forwarding successful<BR>Observe that each transaction goes via a CSFB,Pass,,,,
+10389,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_TELSTRA_BAND_PRIORITY_SEARCH,modem_sbp_config[127].SBP_TELSTRA_BAND_PRIORITY_SEARCH,OTA and OTA BY OP,no,no,no,yes,"If enabled, UE will perform band priority search for Telstra HPLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10390,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_UE_CAP_DSS_PLMN_SUPPORTED_BAND_TABLE,modem_sbp_config[127].SBP_UE_CAP_DSS_PLMN_SUPPORTED_BAND_TABLE,OTA and OTA BY OP,no,no,no,yes,Customers request for DSS(dynamic spectrum sharing) feature dynamic switching.<BR>SBP switch for enabling white/black list check of PLMN ID and NR band in custom file. <BR>SBP ON: DSS feature in UE capability would be determined by custom file.<BR>SBP OFF: Use the default capability defined by DSP.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"if compile option __ENABLE_UE_CAP_DSS_PLMN_SUPPORTED_BAND_TABLE__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10391,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_XID_CMD_BY_FAULTY_NW_RECOV,modem_sbp_config[127].SBP_XID_CMD_BY_FAULTY_NW_RECOV,OTA and OTA BY OP,no,no,no,yes,This SBP controls optimization where Faulty NW sends many XID commands within short duration. <BR>This optimization will not allow further XID commands unless previous XID responses are transmitted.<BR>There will be Maximum 10 XID responses waiting for Transmission <BR>This helps in avoiding large number of XID command/Responses and risk of message queue full issues at LLC.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0: SBP disabled. XID optimization Disabled<BR>0x1: SBP Enabled. XID optimization Available.,,,"To Disable this feature, compile option __DISABLE_XID_CMD_BY_FAULTY_NW_RECOV__ must be defined.",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR>Test Time (minutes): 10<BR>[Init] Set 2G only mode<BR>[Test Step]Inject ~15 XID messages from Machine within 5 seconds, and dont send any Pkt UL ACK Nack from machne during that time<BR>[Expected Result] DUT should ignore XID messages after 10 XID requests.",Pass,,,,
10393,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",serv_endc_nbr_endc_offset,serv_endc_nbr_endc_offset,OTA and OTA BY OP,no,no,no,no,[MCF]Customized offset for low to high priority reselection(endc to endc cell). (dB),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00: disable<BR>non zero: offset value,,,no,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10394,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",serv_non_endc_nbr_endc_offset,serv_non_endc_nbr_endc_offset,OTA and OTA BY OP,no,no,no,no,[MCF]Customized offset for low to high priority reselection(non endc to non endc cell). (dB),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00: disable<BR>non zero: offset value,,,no,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10395,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",serv_non_endc_nbr_non_endc_offset,serv_non_endc_nbr_non_endc_offset,OTA and OTA BY OP,no,no,no,no,[MCF]Customized offset for low to high priority reselection(non endc to non endc cell). (dB),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00: disable<BR>non zero: offset value,,,no,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-10397,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_C2K_BAR_REGISTER_WITH_CONTINUOUS_REJECT,modem_sbp_config[127].SBP_C2K_BAR_REGISTER_WITH_CONTINUOUS_REJECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>C2K bar register with continuous reject<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]defaulting CT card<BR>[Test Step] defaulting CT card as SIM2, do nothing<BR>[Expected Result] keep normal average current",Untested,,,,
-10398,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_EMM_LIMIT_SYNC_TAU,modem_sbp_config[127].SBP_EMM_LIMIT_SYNC_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM will limit the count of sync TAU.<BR>bit 0:0:Disabled, EMM will not limit the count of sync TAU<BR>bit 1:1:Enabled, EMM will limit the count of sync TAU",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-10399,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE reject retry counter maximum",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0~05:counter value,,,,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
-10400,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE disable timer unit for LTE reject retry mechanism<BR>bit 1:1:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 1 sec<BR>bit 2:2:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 1 min<BR>bit 3:3:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 6 mins<BR>bit 4:4:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 1 hour<BR>bit 5:5:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 24 hours<BR>",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,01~05:LTE_REJ_RETRY_DISABLE_TIMER_UNIT,,,,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
-10401,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE disable timer value for LTE reject retry mechanism",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,,,,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
-10402,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[95].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,modem_sbp_data_config[95].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE reject retry mechanism",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3:SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,,,,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
-10403,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>record life timer unit for LTE reject retry mechanism<BR>bit 1:1:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 1 sec<BR>bit 2:2:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 1 min<BR>bit 3:3:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 6 mins<BR>bit 4:4:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 1 hour<BR>bit 5:5:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 24 hours<BR>",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,1~5:SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,,,,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
-10404,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>record life timer value for LTE reject retry mechanism",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,,,,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
-10405,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",address_strictly_compare,ua_config.address_strictly_compare,OTA and OTA BY OP,no,no,no,no,"UE should strictly compare the address information, even if the port number is 5000 or 0.<BR>0:disable<BR>1:enale<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enale<BR>0:disable,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+10397,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_C2K_BAR_REGISTER_WITH_CONTINUOUS_REJECT,modem_sbp_config[127].SBP_C2K_BAR_REGISTER_WITH_CONTINUOUS_REJECT,OTA and OTA BY OP,no,no,no,yes,"If UE receives C2K register reject order from NW, it will re-register until register success. <BR>If the SBP is on, UE will bar C2K register 2minutes after 5 times continuous register reject.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:enable<BR>0x00:disable,,,"if compile option __C2K_BAR_REGISTER_WITH_CONTINUOUS_REJECT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]defaulting CT card<BR>[Test Step] defaulting CT card as SIM2, do nothing<BR>[Expected Result] keep normal average current",Pass,,,,
+10398,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_EMM_LIMIT_SYNC_TAU,modem_sbp_config[127].SBP_EMM_LIMIT_SYNC_TAU,OTA and OTA BY OP,no,no,no,yes,"Under some network, local release TAU will be performed infinitely. <BR>Because NW will keep paging UE after UE performs local release and TAU.<BR>This SBP feature option is used to limit the count of sync TAU to avoid the infinite loop.<BR>When this feature is on, UE will only be limited to perform this kind of sync TAU 2 times in 60 secs.<BR>The count of TAU and the time duration can be set by custom files.<BR>And we didn't restrict which operator now because it happens in different network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+10399,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, UE will retry to search the same PLMN's LTE when UE received network reject.<BR>Once the PLMN's LTE retry counter reaches maximum, UE will disable the PLMN's LTE and search UMTS/GSM.<BR>This SBP data defines the maximum retry counter of the LTE reject retry mechanism.",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0~05:counter value,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
+10400,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the LTE disable timer is composed of value multiplied by unit.<BR>This SBP data defines the unit of LTE disable timer.<BR>The value of LTE disable timer is defined by SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE.",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,01~05:LTE_REJ_RETRY_DISABLE_TIMER_UNIT,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
+10401,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the LTE disable timer is composed of value multiplied by unit.<BR>This SBP data defines the value of LTE disable timer.<BR>The unit of LTE disable timer is defined by SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
+10402,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[95].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,modem_sbp_data_config[95].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,OTA and OTA BY OP,no,no,no,yes,"1. LTE reject retry mechanism: <BR>Customer can configure UE to apply reject retry mechanism on a slide-window basis in order to decrease the power usage of UE. Customer can configure lengths of (1)LTE disable timer, (2)slide-window and (3)reject counter to meet the variant requirements. The main workflow is that: if UE get reject by LTE NW within slide-window, the reject counter will increase. Once counter is over the maximum value, UE will disable LTE for a customized period.<BR><BR>2. This SBP data is the main switch for LTE reject retry mechanism, <BR>and it decides that the mechanism is applied to reject 15 or reject 13 or both of them.<BR><BR>[Note 1] This SBP data takes effect on reject 13 or reject 15 only when the corresponding SBPs is turning on.<BR>e.g. #13 -> SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED, #15 -> SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>[Note 2] Bit Map design, <BR>e.g. apply to #13 = 0x01, apply to #15 = 0x02, and then apply to both = 0x01 | 0x02 = 0x03",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3:SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,,,This SBP data depends on SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE and SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED.,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
+10403,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the record life timer is composed of value multiplied by unit.<BR>This SBP data defines the unit of the record life timer.<BR>The value of the record life timer is defined by SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE.",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,1~5:SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
+10404,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the record life timer is composed of value multiplied by unit.<BR>This SBP data defines the value of the record life timer.<BR>The unit of the record life timer is defined by SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,MD Config,Modem - Customer Requirement,,,"Enable the <BR>1. SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>2. SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED <BR><BR>There are three SBP data could be set:<BR>1. SBP_NWSEL_LTE_REJ_RETRY_MECHANISM:This SBP data is the main switch for LTE reject retry mechanism, and it decides that the mechanism is applied to reject 15 or reject 13 or both of them. <BR>2. SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX: define the maximum retry counter. Default value is 5.<BR>3. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE: define the value of LTE disable timer. Default value is 2. <BR>4. SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT: define the unit of LTE disable timer. Default value is 4 which means the unit is 1 hour.<BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE: define the value of the record life timer. Default value is 1. <BR>5. SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT: define the unit of the record life timer. Default value is 5 which means the unit is 24 hour.<BR><BR>Test 1: UE received the LTE reject #15 max times, check if UE disable the PLMN/LTE<BR>Test 2: UE received the LTE reject #13 max times, check if UE disable the PLMN/LTE",Pass,,,,
+10405,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",address_strictly_compare,ua_config.address_strictly_compare,OTA and OTA BY OP,no,no,no,no,"UE should strictly compare the address information, even if the port number is 5000 or 0.<BR>0:disable<BR>1:enale",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:Enable,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
10406,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",address_strictly_compare.address_strictly_compare,ua_config.address_strictly_compare.address_strictly_compare,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>UE should strictly compare the address information, even if the port number is 5000 or 0.<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10409,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_2G_DISABLED_WITH_ECC_ALLOWED_FOR_MUSE,modem_sbp_config[127].SBP_2G_DISABLED_WITH_ECC_ALLOWED_FOR_MUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>DISABLE_2G for ECC<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10410,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_CUSTOM_BAND_DISABLE_FOR_PLMN,modem_sbp_config[128].SBP_CUSTOM_BAND_DISABLE_FOR_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable the band for operator plmm<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10411,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_SAT_DELAY_REFRESH_DURING_CALL,modem_sbp_config[128].SBP_SAT_DELAY_REFRESH_DURING_CALL,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delay REFRESH command during a call<BR>bit 0:0:Disable - Don't delay REFRESH<BR>bit 1:1:Enabled - Delay REFRESH<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable,,,,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10412,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_SIM_ALLOW_REFRESH_FCN_WHEN_ME_BUSY,modem_sbp_config[128].SBP_SIM_ALLOW_REFRESH_FCN_WHEN_ME_BUSY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Allow refresh FCN when ME is busy<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,"Test in machine (Y/N) Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>1. Trigger MT call<BR>2. Trigger Refresh of Type FCN through SIM simulator or IT3 comprion<BR>3. Check if Device reads the file indicated in Refresh FCN<BR>[Expected Result]<BR>If SBP enabled, device should read the file indicated in Refresh FCN and respond with Terminal Response with result as success<BR>If SBP disabled, device can respond with Terminal Response with result as busy",Untested,,,,
+10409,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[127].SBP_2G_DISABLED_WITH_ECC_ALLOWED_FOR_MUSE,modem_sbp_config[127].SBP_2G_DISABLED_WITH_ECC_ALLOWED_FOR_MUSE,OTA and OTA BY OP,no,no,no,yes,This SBP need to Enable only for MUSE in TMO environment,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10410,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_CUSTOM_BAND_DISABLE_FOR_PLMN,modem_sbp_config[128].SBP_CUSTOM_BAND_DISABLE_FOR_PLMN,OTA and OTA BY OP,no,no,no,yes,When this SBP is enabled bands will be disabled based on the configured PLMN,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"if compile option __CUSTOM_BAND_DISABLE_FOR_PLMN__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10411,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_SAT_DELAY_REFRESH_DURING_CALL,modem_sbp_config[128].SBP_SAT_DELAY_REFRESH_DURING_CALL,OTA,no,no,no,yes,"With the feature enabled, the REFRESH command will be delayed during a call, until the call ended.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable,,,N/A,SIM Application Toolkit - Class 1 & 2 & 3,SIM,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+10412,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_SIM_ALLOW_REFRESH_FCN_WHEN_ME_BUSY,modem_sbp_config[128].SBP_SIM_ALLOW_REFRESH_FCN_WHEN_ME_BUSY,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled will allow execution of refresh type FCN when ME is busy in call or sms transaction.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,,,,,"Test in machine (Y/N) Y<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>1. Trigger MT call<BR>2. Trigger Refresh of Type FCN through SIM simulator or IT3 comprion<BR>3. Check if Device reads the file indicated in Refresh FCN<BR>[Expected Result]<BR>If SBP enabled, device should read the file indicated in Refresh FCN and respond with Terminal Response with result as success<BR>If SBP disabled, device can respond with Terminal Response with result as busy",Untested,,,,
10413,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",gba_delay_ua_send_packet,gba_info.gba_delay_ua_send_packet,OTA and OTA BY OP,no,no,no,no,UA packet sending delay after BSF response (milliseonds)<BR>0~1000:UA packet sending delay after BSF response (milliseonds)<BR>,UNSIGNED SHORT,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,No dependency,XCAP IMS-SS,XCAP,,,"Run SS command which will use XCAP over Ut interface. During the authentication phase, check the log after BSF server 200 OK response. Should contain read of setting IDX_INT_GBA_DELAY_UA_SEND_PACKET.<BR><BR>Like for example: [XCAP_CONFIG][DATA] Get integer (sim id=1), (sbp id=154), (mcc=244), (mnc=91), (IDX_INT_GBA_DELAY_UA_SEND_PACKET=200)<BR><BR>Check from the log configured delay is applied.",Pass,,,,
10415,1257,NVRAM_EF_MML1_ANT_CUSTOM_PARAMETER_LID,1,rx_dat_config_index,mml1_ant_fe_route_db[0~159].ant_split_band_setting.ant_split_part[0~3].rx_dat_config_index,OTA,no,no,no,no,Rx DAT setting index,ENUM,1,,,0xFF,NR15.R3.MD700.IVT.MP1MR3.MP,,0~49:MMRFD_DAT_CONFIG_IDX0~MMRFD_DAT_CONFIG_IDX49,,,,Antenna Features,RF_Proprietary,,,Test in machine (N)<BR>Test Time (10 minutes)<BR>[Init] Follow MCF SOP<BR>[Test Step] Follow MCF SOP<BR>[Expected Result] Follow MCF SOP,Pass,,,,
10416,1257,NVRAM_EF_MML1_ANT_CUSTOM_PARAMETER_LID,1,rx_tuner_setting_idx,mml1_ant_fe_route_db[0~159].ant_split_band_setting.ant_split_part[0~3].rx_tuner_setting_idx,OTA,no,no,no,no,Rx tuner setting index,ENUM,1,,,0xFF,NR15.R3.MD700.IVT.MP1MR3.MP,,0~159:MMRFD_ANT_TUNER_CONFIG_IDX0~MMRFD_ANT_TUNER_CONFIG_IDX159,,,,Antenna Features,RF_Proprietary,,,Test in machine (N)<BR>Test Time (10 minutes)<BR>[Init] Follow MCF SOP<BR>[Test Step] Follow MCF SOP<BR>[Expected Result] Follow MCF SOP,Pass,,,,
@@ -9285,7 +9285,7 @@
10445,1258,NVRAM_EF_MML1_ANT_TUNER_PARAMETER_LID,1,mipi_elm_type,ant_tuner_mipi_event_custom_table[0~159][0~2].mipi_elm_type,OTA,no,no,no,no,"0=NULL type, 2=ANT type, should be 2 for a valid tuner event.",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,2:MMRFD_MIPI_ANT,,,,Antenna Features,RF_Proprietary,,,Test in machine (N)<BR>Test Time (10 minutes)<BR>[Init] Follow MCF SOP<BR>[Test Step] Follow MCF SOP<BR>[Expected Result] Follow MCF SOP,Pass,,,,
10446,1258,NVRAM_EF_MML1_ANT_TUNER_PARAMETER_LID,1,mipi_evt_offset,ant_tuner_mipi_event_custom_table[0~159][0~2].mipi_evt_offset,OTA,no,no,no,no,"control timing of the MIPI tuner, should be multiple of 312, ex. 1us = 1*312 = 312.",INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,<0:ON event<BR>>0:OFF event,,,,Antenna Features,RF_Proprietary,,,Test in machine (N)<BR>Test Time (10 minutes)<BR>[Init] Follow MCF SOP<BR>[Test Step] Follow MCF SOP<BR>[Expected Result] Follow MCF SOP,Pass,,,,
10447,1258,NVRAM_EF_MML1_ANT_TUNER_PARAMETER_LID,1,mipi_evt_type,ant_tuner_mipi_event_custom_table[0~159][0~2].mipi_evt_type,OTA,no,no,no,no,"0=NULL, 1=ANT_ON for applying mipi tuner setting in RF window ON and 2=ANT_OFF for applying mipi tuner setting in RF window OFF.",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:MMRFD_MIPI_ANT_ON<BR>2:MMRFD_MIPI_ANT_OFF,,,,Antenna Features,RF_Proprietary,,,Test in machine (N)<BR>Test Time (10 minutes)<BR>[Init] Follow MCF SOP<BR>[Test Step] Follow MCF SOP<BR>[Expected Result] Follow MCF SOP,Pass,,,,
-10448,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_NR_MIB_INTRA_FREQ_RESEL_NOTALLOWED_IGNORE_WHEN_SIB1_FAIL,modem_sbp_config[128].SBP_NR_MIB_INTRA_FREQ_RESEL_NOTALLOWED_IGNORE_WHEN_SIB1_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Determine to bar cell or whole frequency when SIB1 reception failure and MIB.intraFreqReselection is not allowed.<BR>bit 0:0:Enhancement disabled, bar whole frequency<BR>bit 1:1:Enhancement enabled, bar cell only",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"bit: 0/1:bit 0:0:Enhancement disabled, bar whole frequency<BR>bit 1:1:Enhancement enabled, bar cell only",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : N<BR>Test Time (minutes) : None<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10448,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_NR_MIB_INTRA_FREQ_RESEL_NOTALLOWED_IGNORE_WHEN_SIB1_FAIL,modem_sbp_config[128].SBP_NR_MIB_INTRA_FREQ_RESEL_NOTALLOWED_IGNORE_WHEN_SIB1_FAIL,OTA and OTA BY OP,no,no,no,yes,"For SA scenario, if "intraFreqReselection" is set to "notAllowed", SPEC expects UE to bar whole frequency when UE is unable to acquire SIB1.<BR>If this SBP is turn ON, UE will bar target cell only instead of barring whole frequency.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"bit: 0/1:bit 0:0:Enhancement disabled, bar whole frequency<BR>bit 1:1:Enhancement enabled, bar cell only",,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : N<BR>Test Time (minutes) : None<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
10450,1541,NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID,"1,2",is_nw_det_enh_default_reattach,is_nw_det_enh_default_reattach,OTA,no,no,no,no,"[MCF] Default handling for cause from Detach request not defined in this table. True: map to reattach, False: follow spec",ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10451,1541,NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID,"1,2",nw_det_enh_max_count,nw_det_enh_max_count,OTA,no,no,no,no,[MCF] Max times of Detach Request map to re-attach atttemp,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10452,1541,NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID,"1,2",nw_det_enh_max_interval_time,nw_det_enh_max_interval_time,OTA,no,no,no,no,[MCF] Timer length to reset counter of Detach Request map to re-attach atttemp in seconds,UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -9369,27 +9369,27 @@
10532,1226,NVRAM_EF_MML1_TXPOWEROFFSET_LID,1,SWTP_manual_mod_enable,SWTP_manual_mod_enable,OTA,no,no,yes,no,"[DOC,MCF] Tx power offset feature",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10533,2370,NVRAM_EF_MRS_OPERATOR_FEATURE_TABLE_LID,1,feature.OP_FEATURE_ENDC_BEFORE_SA_SEARCH,entry[0~99].feature.OP_FEATURE_ENDC_BEFORE_SA_SEARCH,OTA,no,no,no,yes,Operator Feature<BR>ENDC before SA search<BR>bit 0:0:No<BR>bit 1:1:Yes,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
10534,2370,NVRAM_EF_MRS_OPERATOR_FEATURE_TABLE_LID,1,feature.OP_FEATURE_SA_STORED_ONLY_SEARCH,entry[0~99].feature.OP_FEATURE_SA_STORED_ONLY_SEARCH,OTA,no,no,no,yes,Operator Feature<BR>NR SA Stored only search<BR>bit 0:0:No<BR>bit 1:1:Yes,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] <BR>[Test Step]<BR>Add modified MCF value and do power on<BR>[Expected Result]<BR>Check if MCF modified value has been modified,Pass,,,,
-10535,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE ignore LTE redirect and try AFR to 5G first<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-10536,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_ATT_WIFI_CELLULAR_HO_THRESHOLD,modem_sbp_config[128].SBP_ATT_WIFI_CELLULAR_HO_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Report handover threshold measurements for wifi<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10537,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_ME_FOR_CUSTOM_PLMN,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_ME_FOR_CUSTOM_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>block illegal ME for custom PLMN <BR>bit 0:0:Not Enabled: Always send the Illegal ME to GMSS<BR>bit 1:1:Enabled: Only send Illegal ME when it matches to custom PLMN",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,1. receiving LR reject cause=ILLEGAL_ME or ILLEGAL_MS with invalid SIM<BR>2. check MSG_ID_GMSS_NWSEL_ILLEAGAL_ME_IND,Untested,,,,
-10538,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_UE,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_UE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable block illegal ME feature<BR>bit 0:0:Disabled: When DUT receives rej #3, do not block the entire device<BR>bit 1:1:Enabled: When DUT receives rej #3, block the entire device",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bool: False,,,NA,MD Config,Modem - Customer Requirement,,,[Init]<BR>[Test Step]<BR>UE reject #3<BR>[Expected Result],Pass,,,,
-10539,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_EMM_CONSIDER_LATEST_ATTACH,modem_sbp_config[128].SBP_EMM_CONSIDER_LATEST_ATTACH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Consider latest Attach ID while handling enqueued DETACH_REQ.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10540,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_EMM_R14_LOCAL_REL_T3440_EMC_PDN_REQUEST,modem_sbp_config[128].SBP_EMM_R14_LOCAL_REL_T3440_EMC_PDN_REQUEST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Local release when T3440 running and ESM indicates EMC PDN Needed.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10541,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_EMM_TRIGGER_TAU_UPON_IRRDT_4G5_FAILURE,modem_sbp_config[129].SBP_EMM_TRIGGER_TAU_UPON_IRRDT_4G5_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM triggers TAU after IRRDT 4G5 failure<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10542,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_IMS_UNREGISTERED_OR_VOPS_NOT_SUPPORT,modem_sbp_config[129].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_IMS_UNREGISTERED_OR_VOPS_NOT_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable EUTRAN capability and trigger EPS detach if needed when IMS unregistered or VOPS not support.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,LTE Protocol (R13 Baseline),4G,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-10543,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_NFR_PROTECT,modem_sbp_config[129].SBP_NFR_PROTECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE keep the connection to wait NW release/handover(NFR) after call end<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0 /1,,,,NR RRC VoNR Enhancement - Paging receiving ratio _ NR occupying rate _ HO enhancement,MTK Proprietary,,,Test in machine Y<BR>Test Time (minutes) make EPSFB call<BR>[Init] camp on SA cell<BR>[Test Step] make EPSFB call<BR>[Expected Result] EPSFB call successfully and go back 5G,Untested,,,,
-10544,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_NO_ECC_RETRY_FOR_MM_CAUSE_101,modem_sbp_config[129].SBP_NO_ECC_RETRY_FOR_MM_CAUSE_101,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>No ECC retry for MM cause 101<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enabled. When CM SERVICE REJECT(#101) message is returned from the NW, L4 shall stop retry originations.<BR>0:Not Enabled. When CM SERVICE REJECT(#101) message is returned from the NW, L4 shall retry originations.",,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step]<BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial emergency call normally. Provide the pass log to RD to check,Untested,,,,
-10545,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_SUBADDRESS_SETTING,modem_sbp_config[129].SBP_SUBADDRESS_SETTING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Report the sub address provided in the dial string by AP to the network.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10546,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[101].SBP_ENDC_EN_AMPR,modem_sbp_data_config[101].SBP_ENDC_EN_AMPR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable ENDC enhanced AMPR table<BR>bit 0:0:Enhanced table disable<BR>bit 1:1:Enhanced table enable",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+10535,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,modem_sbp_config[128].SBP_AFR_TO_5G_IGNORE_LTE_REDIRECT,OTA and OTA BY OP,no,no,no,yes,"Some NW may trigger LTE redirect after call end. If UE can perform AFR to 5G, ignore LTE redirect and try AFR to 5G first.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+10536,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_ATT_WIFI_CELLULAR_HO_THRESHOLD,modem_sbp_config[128].SBP_ATT_WIFI_CELLULAR_HO_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,The SBP feature control the requirement CDR-Wifi 1510 from ATnT.<BR>Report handover threshold measurements for wifi.<BR>The Device shall use 500ms as the time to trigger for the handover threshold measurements.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"if compile option __SBP_ATT_WIFI_CELLULAR_HO_THRESHOLD__ is defined, the SBP is enabled",,,,,,Untested,,,,
+10537,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_ME_FOR_CUSTOM_PLMN,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_ME_FOR_CUSTOM_PLMN,OTA and OTA BY OP,no,no,no,yes,"When DUT receives reject cause #6, This SBP allows to decide whether send Illegal_ME_IND always or based on camped PLMN presence in CUSTOM_BLOCK_ILLEGAL_ME_PLMN_LIST list<BR>This SBP works only when SBP_BLOCK_ILLEGAL_ME is enabled.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,The setting of this SBP could be set to "disable" by defining compile option __DISABLE_BLOCK_ILLEGAL_ME_FOR_CUSTOM_PLMN__ in the makefile,MD Config,Modem - Customer Requirement,,,1. receiving LR reject cause=ILLEGAL_ME or ILLEGAL_MS with invalid SIM<BR>2. check MSG_ID_GMSS_NWSEL_ILLEAGAL_ME_IND,Untested,,,,
+10538,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_UE,modem_sbp_config[129].SBP_BLOCK_ILLEGAL_UE,OTA and OTA BY OP,no,no,no,yes,"When DUT receives rej #3 and needs to follow GSMA TS37_2.2, it needs to enable both SBP_BLOCK_ILLEGAL_ME and SBP_BLOCK_ILLEGAL_UE. Note that SBP_BLOCK_ILLEGAL_UE depends on SBP_BLOCK_ILLEGAL_ME. If SBP_BLOCK_ILLEGAL_ME is OFF, SBP_BLOCK_ILLEGAL_UE has no effect. For rej #3 (illegal UE), Modem can block entire device as GSMA TS37_2.2 requirement.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bool: False,,,"SBP_BLOCK_ILLEGAL_UE depends on SBP_BLOCK_ILLEGAL_ME. To "enable" this feature, need define compile option __BLOCK_ILLEGAL_UE__ and __BLOCK_ILLEGAL_ME__ in the makefile",MD Config,Modem - Customer Requirement,,,[Init]<BR>[Test Step]<BR>UE reject #3<BR>[Expected Result],Pass,,,,
+10539,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_EMM_CONSIDER_LATEST_ATTACH,modem_sbp_config[128].SBP_EMM_CONSIDER_LATEST_ATTACH,OTA and OTA BY OP,no,no,no,yes,"In some cases DETACH_REQ will get enqueued and later ATTACH_REQ may get handled and not get buffered in bufAttachReq.<BR>In such cases, check att_id of DETACH_REQ and EMM REG context before emmInitAttach reset.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __ENABLE_EMM_CONSIDER_LATEST_ATTACH__ is defined, the SBP is enabled.",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10540,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[128].SBP_EMM_R14_LOCAL_REL_T3440_EMC_PDN_REQUEST,modem_sbp_config[128].SBP_EMM_R14_LOCAL_REL_T3440_EMC_PDN_REQUEST,OTA and OTA BY OP,no,no,no,yes,"As per TS24.301 R14 CR2672, when T3440 is running as per 5.3.1.2.1, case a) or case f) and upper layers/ESM<BR>indicates EMC PDN is needed, then UE shall stop T3440 and locally release NAS signaling connection to proceed with EMC.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __ENABLE_EMM_R14_LOCAL_REL_T3440_EMC_PDN_REQUEST__ is defined, the SBP is enabled.",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10541,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_EMM_TRIGGER_TAU_UPON_IRRDT_4G5_FAILURE,modem_sbp_config[129].SBP_EMM_TRIGGER_TAU_UPON_IRRDT_4G5_FAILURE,OTA and OTA BY OP,no,no,no,yes,"EMM shall trigger TAU to sync with NW again in case any MT signalling may be missed due to IRRDT 4G5 failure.<BR>According to the past experience, this scenario does not happen quite often. That is, the UE should be able to <BR>receive MT signalling even if TAU is not triggered after IRRDT 4G5 failure.<BR>.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,This feature can be disabled by defining compiler option __SBP_EMM_NOT_TRIGGER_TAU_UPON_IRRDT_4G5_FAILURE__.,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10542,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_IMS_UNREGISTERED_OR_VOPS_NOT_SUPPORT,modem_sbp_config[129].SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_IMS_UNREGISTERED_OR_VOPS_NOT_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"This SBP feature is for LG U+ requirement.<BR>If the UE fails IMS registration or VOPS is not supported by network, the UE shall behave differently according to attach type.<BR>- If attach type in ATTACH ACCEPT message is "EPS only", the UE shall perform EMM detach procedure and try to search other PLMN and attach to it.<BR>Therefore, UE will trigger EPS detach if needed, disable EUTRAN capability, and search 2/3G RATs.<BR>UE can still PS attach on 2/3G RATs with EUTRAN capability disabled.<BR>Note that this SBP could not be enabled with SBP_EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_DATA_IMS_OFF in the same time.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,This SBP can be controlled by compile option __EUTRAN_DISABLE_AND_EPS_DETACH_WHEN_IMS_UNREGISTERED_OR_VOPS_NOT_SUPPORT__,LTE Protocol (R13 Baseline),4G,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+10543,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_NFR_PROTECT,modem_sbp_config[129].SBP_NFR_PROTECT,OTA and OTA BY OP,no,no,no,yes,To aviod the UE local release and cause unsync between NW and UE side. Keep the connection to wait NW release/handover(NFR) after call end.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0 /1,,,Feature could be enabled by enabling compiler option __SBP_NFR_PROTECT__.,NR RRC VoNR Enhancement - Paging receiving ratio _ NR occupying rate _ HO enhancement,MTK Proprietary,,,Test in machine Y<BR>Test Time (minutes) make EPSFB call<BR>[Init] camp on SA cell<BR>[Test Step] make EPSFB call<BR>[Expected Result] EPSFB call successfully and go back 5G,Untested,,,,
+10544,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_NO_ECC_RETRY_FOR_MM_CAUSE_101,modem_sbp_config[129].SBP_NO_ECC_RETRY_FOR_MM_CAUSE_101,OTA and OTA BY OP,no,no,no,yes,"When CM SERVICE REJECT message is returned from the NW and cause value is MM_CAUSE #101, this feature controls if UE will stop ECC retry procedure or not.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enabled. When CM SERVICE REJECT(#101) message is returned from the NW, L4 shall stop retry originations.<BR>0:Not Enabled. When CM SERVICE REJECT(#101) message is returned from the NW, L4 shall retry originations.",,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step]<BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial emergency call normally. Provide the pass log to RD to check,Pass,,,,
+10545,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_SUBADDRESS_SETTING,modem_sbp_config[129].SBP_SUBADDRESS_SETTING,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+10546,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[101].SBP_ENDC_EN_AMPR,modem_sbp_data_config[101].SBP_ENDC_EN_AMPR,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable enhanced AMPR table for intraband B41 ENDC.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10547,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",naptr_srv_level,http_info.naptr_srv_level,OTA and OTA BY OP,no,no,no,no,Support XCAP DNS resolve NAPTR SRV Level<BR>0:NAPTR SRV LEVEL NONE<BR>1:NAPTR SRV LEVEL SRV<BR>2:NAPTR SRV LEVEL NAPTR,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 1:1:NAPTR SRV LEVEL SRV<BR>bit 2:2:NAPTR SRV LEVEL NAPTR<BR>0:NAPTR SRV LEVEL NONE<BR>1:NAPTR SRV LEVEL SRV<BR>2:NAPTR SRV LEVEL NAPTR,,,,XCAP IMS-SS,XCAP,,,Perform SS over XCAP for RJIO,Pass,,,,
10548,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",naptr_srv_level.naptr_srv_level,http_info.naptr_srv_level.naptr_srv_level,Not Support,no,no,no,no,DNS resolve NAPTR Srv Level Support<BR><BR>bit 0:0:NAPTR SRV LEVEL NONE<BR>bit 1:1:NAPTR SRV LEVEL SRV<BR>bit 2:2:NAPTR SRV LEVEL NAPTR,BIT,8,,8,0,NR15.R3.MD700.IVT.MP1MR3.MP,,2:2:NAPTR SRV LEVEL NAPTR<BR>0:0:NAPTR SRV LEVEL NONE<BR>1:1:NAPTR SRV LEVEL SRV,,,,XCAP IMS-SS,XCAP,,,Perform SS over XCAP for RJIO,Untested,,,,
10549,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_xcap_diff,xcap_info.support_xcap_diff,Not Support,no,no,no,no,Support XCAP diff<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Disabled,,,,XCAP IMS-SS,XCAP,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10550,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_xcap_diff.support_xcap_diff,xcap_info.support_xcap_diff.support_xcap_diff,Not Support,no,no,no,no,Support XCAP-diff<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1<BR><BR>0: disable<BR>1: enable:Support XCAP d-ff feature or not,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
-10551,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_UMTS_DISABLE_AMR_NB,modem_sbp_config[129].SBP_UMTS_DISABLE_AMR_NB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable UMTS AMR NB codec<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10551,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[129].SBP_UMTS_DISABLE_AMR_NB,modem_sbp_config[129].SBP_UMTS_DISABLE_AMR_NB,OTA and OTA BY OP,no,no,no,yes,This feature is to disable the sending of UMTS AMR NB codec<BR>to NW in CC__SETUP message.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
10554,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_media_when_not_support_media.remove_media_when_not_support_media,xcap_info.remove_media_when_not_support_media.remove_media_when_not_support_media,Not Support,no,no,no,no,remove media when media_tag is false<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:0:Disabled<BR>bit 1:1:Enabled,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
10555,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_user_end_call_no_rtppkt_emc,ua_config.wait_user_end_call_no_rtppkt_emc,Not Support,no,no,no,no,"When no rtp packet for emc, wait for user end call.<BR>0: emc call auto drop when no rtp packet.<BR>1: wait for user end call when no rtp packet for emc.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:emc call auto drop when no rtp packet<BR>1:wait for user end call when no rtp packet for emc,,,,IMS,IMS,,,,Untested,,,,
-10556,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_SEARCH_23G_WHEN_REJECT_39CAUSE,modem_sbp_config[130].SBP_SEARCH_23G_WHEN_REJECT_39CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Search 23G when reject 39<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10590,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_DISABLE_PAGING_RESPONSE_IN_LIMITED_SERVICE_STATE,modem_sbp_config[130].SBP_DISABLE_PAGING_RESPONSE_IN_LIMITED_SERVICE_STATE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore paging in limited service state<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0X0:Even UE is in LIMITED SERVICE, when a paging request comes with identity as IMSI, it will be honored<BR><BR>0x1:UE will ignore the paging request even if the idenity is IMSI in Limited service",,,__DISABLE_PAGING_RESPONSE_IN_LIMITED_STATE__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 30 mins <BR>[Init] DUT boot up <BR>[Test Step]<BR> ->Power on<BR>->Start registration on 3G<BR>->LAU rejected with cause#11<BR>->Trigger Paging with identity type as IMSI<BR>[Expected Result]<BR>SBP enabled-UE should ignore paging <BR>SBP disabled-UE as aligned the spec behavior will proceed with paging,Pass,,,,
+10556,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_SEARCH_23G_WHEN_REJECT_39CAUSE,modem_sbp_config[130].SBP_SEARCH_23G_WHEN_REJECT_39CAUSE,OTA and OTA BY OP,no,no,no,yes,"If this SBP is enabled, when UE is doing MT call with 4G and receiving reject cause #39, UE will go to 23G to make MT call to upgrade performance.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+10590,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_DISABLE_PAGING_RESPONSE_IN_LIMITED_SERVICE_STATE,modem_sbp_config[130].SBP_DISABLE_PAGING_RESPONSE_IN_LIMITED_SERVICE_STATE,OTA and OTA BY OP,no,no,no,yes,"As per 3GPP spec, When MM in idle state and service state is LIMITED SERVICE, MM can responds to paging if the identity type is IMSI<BR><BR>SBP SBP_DISABLE_PAGING_RESPONSE_IN_LIMITED_SERVICE_STATE has been introduced to comply with the new requirement. If the SBP is enabled, MM will ignore the paging and do not process the Paging request <BR><BR>By default the SBP will be kept disabled and this feature will not be applicable for Test sim",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0X0:Even UE is in LIMITED SERVICE, when a paging request comes with identity as IMSI, it will be honored<BR><BR>0x1:UE will ignore the paging request even if the idenity is IMSI in Limited service",,,This feature is controlled by __DISABLE_PAGING_RESPONSE_IN_LIMITED_STATE__.,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 30 mins <BR>[Init] DUT boot up <BR>[Test Step]<BR> ->Power on<BR>->Start registration on 3G<BR>->LAU rejected with cause#11<BR>->Trigger Paging with identity type as IMSI<BR>[Expected Result]<BR>SBP enabled-UE should ignore paging <BR>SBP disabled-UE as aligned the spec behavior will proceed with paging,Pass,,,,
10593,2888,NVRAM_EF_L5_CC_ECC_LIST_OM_LID,"1,2",cat,ecc[0~255].cat,OTA,no,no,no,no,"[MCF]category, bitmapped",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:ecc category,,,,MD Config,Modem - Customer Requirement,,,update OTA file and then power on to check ecc list,Pass,,,,
10594,2888,NVRAM_EF_L5_CC_ECC_LIST_OM_LID,"1,2",condition,ecc[0~255].condition,OTA,no,no,no,no,[MCF]condition for ecc numbers,UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~2},,,,MD Config,Modem - Customer Requirement,,,update OTA file and then power on to check ecc list,Pass,,,,
10595,2888,NVRAM_EF_L5_CC_ECC_LIST_OM_LID,"1,2",condition.condition,ecc[0~255].condition.condition,OTA,no,no,no,no,"[MCF]condition for ecc numbers<BR><BR>bit 0:0:ecc only for no sim<BR>bit 1:1:ecc always<BR>bit 2:2:for fake ui, normal call but ui show ecc<BR>",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~2},,,,MD Config,Modem - Customer Requirement,,,update OTA file and then power on to check ecc list,Pass,,,,
@@ -9404,23 +9404,23 @@
10604,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",elevator_leave_time_period,elevator_leave_time_period,OTA and OTA BY OP,no,no,no,no,[MCF]Customized elevator mode leaving time period. (s),UNSIGNED INT,4,,,"0x05, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,uint32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10605,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",elevator_leave_window_offset,elevator_leave_window_offset,OTA and OTA BY OP,no,no,no,no,[MCF]Customized window offset for elevator mode leaving judgement. (qdBm),UNSIGNED CHAR,1,,,0x18,NR15.R3.MD700.IVT.MP1MR3.MP,,uint8,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10606,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",elevator_skip_A1_thresh,elevator_skip_A1_thresh,OTA and OTA BY OP,no,no,no,no,[MCF]Customized RSRP threshold for elevator mode A1 skip judgement. (qdBm),SHORT,2,,,"0x70, 0xfe,",NR15.R3.MD700.IVT.MP1MR3.MP,,int16,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-10607,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_MODEM_LTE_ENDC_ELEVATOR_MODE,modem_sbp_config[130].SBP_MODEM_LTE_ENDC_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MOB disable NSA elevator mode feature<BR>bit 0:0:Not apply NSA elevator mode feature<BR>bit 1:1:Apply NSA elevator mode feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10608,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Order CA with Enablelist for custom PLMN<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+10607,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_MODEM_LTE_ENDC_ELEVATOR_MODE,modem_sbp_config[130].SBP_MODEM_LTE_ENDC_ELEVATOR_MODE,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turn ON, UE detects elevator mode by siganl quality varience. Then, UE will try to return to NSA cell when entering elevator mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,Feature could be enabled by enabling compiler option __ENABLE_SBP_MODEM_LTE_ENDC_ELEVATOR_MODE__.,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+10608,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,modem_sbp_config[130].SBP_ORDER_CA_WITH_ENABLELIST,OTA and OTA BY OP,no,no,no,yes,"To fullfill some operator requirement- 128 CA combinations shall be selected according to the priority by requested. <BR>When the serving PLMN is set in CUSTOM_ORDER_CA_WITH_ENABLELIST_PLMN_LIST, and requestedFrequencyBands is not set in UECapabilityEnquiry from network,<BR>the CA combinations will be reported according to the order of CA Enablelist in custom_lte_ca.xls.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,The setting of this SBP could be set to "Enabled" by defining compile option __ORDER_CA_WITH_ENABLELIST__ in the makefile,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
10610,1537,NVRAM_EF_LTE_PREFERENCE_LID,"1,2",ue_mode_by_at_cmd,ue_mode_by_at_cmd,OTA and OTA BY OP,no,no,no,yes,"[RUNTIME, MCF]ue_mode_by_at_cmd",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~4:0: PS_MODE_2 1: CS_PS_MODE_1 2: CS_PS_MODE_2 3: PS_MODE_1 4: INVALID (auto),,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10611,1537,NVRAM_EF_LTE_PREFERENCE_LID,"1,2",ue_mode_by_at_cmd.ue_mode_by_at_cmd,ue_mode_by_at_cmd.ue_mode_by_at_cmd,OTA and OTA BY OP,no,no,no,yes,"[RUNTIME, MCF]ue_mode_by_at_cmd<BR>ue_mode_by_at_cmd<BR>bit 0:0:PS mode 2<BR>bit 1:1:CS/PS mode 1<BR>bit 2:2:CS/PS mode 2<BR>bit 3:3:PS mode 1<BR>bit 4:4:Clear",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~4:0: PS_MODE_2 1: CS_PS_MODE_1 2: CS_PS_MODE_2 3: PS_MODE_1 4: INVALID (auto),,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10612,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY,modem_sbp_config[130].SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable EUTRAN for the current PLMN and search next available LTE PLMN<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes) 0<BR>[Init]<BR>[Test Step] set SBP on<BR>[Expected Result] SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY TRUE,Untested,,,,
-10613,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[102].SBP_PDCP_DISC_TMR_VOICE_RB,modem_sbp_data_config[102].SBP_PDCP_DISC_TMR_VOICE_RB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Value of PDCP discard timer for voice RB<BR>bit 0:0:10 ms<BR>bit 1:1:20 ms<BR>bit 2:2:30 ms<BR>bit 3:3:40 ms<BR>bit 4:4:50 ms<BR>bit 5:5:60 ms<BR>bit 6:6:75 ms<BR>bit 7:7:100 ms<BR>bit 8:8:150 ms<BR>bit 9:9:200 ms<BR>bit 10:10:250 ms<BR>bit 11:11:300 ms<BR>bit 12:12:500 ms<BR>bit 13:13:750 ms<BR>bit 14:14:1500 ms<BR>bit 15:15:infinity",BIT,8,,8,0x09,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00: 10ms, 0x01: 20ms, 0x02: 30ms, 0x03: 40ms, 0x04: 50ms, 0x05: 60ms, 0x06: 75ms, 0x07: 100ms, 0x08: 150ms, 0x09: 200ms, 0x0A: 250ms, 0x0B: 300ms, 0x0C: 500ms, 0x0D: 750ms, 0x0E: 1500ms, 0x0F: infinity",,,,MD Config,Modem - Customer Requirement,,,PS transmission test,Pass,,,,
-10614,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,band,sar_2rgn_db[0~39].sar_2rgn_node[0~1].band,OTA,no,no,yes,no,NR ENDC SAR table<BR>this parameter is band,ENUM,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10615,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,rat,sar_2rgn_db[0~39].sar_2rgn_node[0~1].rat,OTA,no,no,yes,no,NR ENDC SAR table<BR>this is rat,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10616,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,sar_tbl_ant,sar_2rgn_db[0~39].sar_2rgn_node[0~1].sar_tbl[0~11].sar_tbl_ant,OTA,no,no,yes,no,NR ENDC SAR table,UNSIGNED CHAR,20,20,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10617,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,band,sar_1rgn_db[0~19].sar_1rgn_node.band,OTA,no,no,yes,no,NR only SAR table<BR>band,ENUM,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10618,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,rat,sar_1rgn_db[0~19].sar_1rgn_node.rat,OTA,no,no,yes,no,NR only SAR table<BR>rat,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10619,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,sar_tbl_ant,sar_1rgn_db[0~19].sar_1rgn_node.sar_tbl[0~11].sar_tbl_ant,OTA,no,no,yes,no,NR only SAR table,UNSIGNED CHAR,20,20,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,SAR TX Power offset,SAR Mitigation,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
-10620,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_CT_ENTER_LIMITED_WHEN_DISABLE_C2K_VOPS,modem_sbp_config[130].SBP_CT_ENTER_LIMITED_WHEN_DISABLE_C2K_VOPS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>CT limited criteria on C2K and VoPS<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable this feature<BR>0<BR>:disable this feature,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10621,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_URSP_EVAL_SUPPORT,modem_sbp_config[130].SBP_URSP_EVAL_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>URSP Evaluation Support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10622,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_URSP_RULE_SUPPORT,modem_sbp_config[130].SBP_URSP_RULE_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>URSP Rule Support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10625,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_CONFIG_ENDC_COMB_BY_SBPID,modem_sbp_config[131].SBP_CONFIG_ENDC_COMB_BY_SBPID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable configure ENDC combination by SBP ID<BR>bit 0:0:Disable feature - configure EN-DC combination by SBP ID <BR>bit 1:1:Enable feature - configure EN-DC combination by SBP ID",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,__SBP_CONFIG_ENDC_COMB_BY_SBPID__,,,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Untested,,,,
-10627,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_CT_HVOLTE_DEFAULT_VOPS_MODE,modem_sbp_config[131].SBP_CT_HVOLTE_DEFAULT_VOPS_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>config default CT hVolte mode<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,,MD Config,Modem - Customer Requirement,,,N,Untested,,,,
+10612,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY,modem_sbp_config[130].SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY,OTA and OTA BY OP,no,no,no,yes,Disable EUTRAN capbilities upon CS voice or PS data unavailable as per TS 24.301 while UE is in LTE_ONLY rat mode and CSPS mode with IMS configured ON,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,"if compile option __DISABLE_EUTRAN_WHILE_LTE_ONLY__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes) 0<BR>[Init]<BR>[Test Step] set SBP on<BR>[Expected Result] SBP_DISABLE_EUTRAN_WHILE_LTE_ONLY TRUE,Untested,,,,
+10613,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[102].SBP_PDCP_DISC_TMR_VOICE_RB,modem_sbp_data_config[102].SBP_PDCP_DISC_TMR_VOICE_RB,OTA and OTA BY OP,no,no,no,yes,Value of PDCP discard timer for voice RB (in ms),BIT,8,,8,0x09,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00: 10ms, 0x01: 20ms, 0x02: 30ms, 0x03: 40ms, 0x04: 50ms, 0x05: 60ms, 0x06: 75ms, 0x07: 100ms, 0x08: 150ms, 0x09: 200ms, 0x0A: 250ms, 0x0B: 300ms, 0x0C: 500ms, 0x0D: 750ms, 0x0E: 1500ms, 0x0F: infinity",,,N/A,MD Config,Modem - Customer Requirement,,,PS transmission test,Pass,,,,
+10614,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,band,sar_2rgn_db[0~39].sar_2rgn_node[0~1].band,OTA,no,no,yes,no,NR ENDC SAR table<BR>this parameter is band,ENUM,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10615,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,rat,sar_2rgn_db[0~39].sar_2rgn_node[0~1].rat,OTA,no,no,yes,no,NR ENDC SAR table<BR>this is rat,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10616,57371,NVRAM_EF_NL1_SAR_ENDC_SETTING_LID,1,sar_tbl_ant,sar_2rgn_db[0~39].sar_2rgn_node[0~1].sar_tbl[0~11].sar_tbl_ant,OTA,no,no,yes,no,NR ENDC SAR table,UNSIGNED CHAR,20,20,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10617,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,band,sar_1rgn_db[0~19].sar_1rgn_node.band,OTA,no,no,yes,no,NR only SAR table<BR>band,ENUM,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: {0~270},,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10618,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,rat,sar_1rgn_db[0~19].sar_1rgn_node.rat,OTA,no,no,yes,no,NR only SAR table<BR>rat,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,MMRF_UNI_RAT_2G = 1<BR>MMRF_UNI_RAT_3G_TDD = 2<BR>MMRF_UNI_RAT_3G_FDD = 4<BR>MMRF_UNI_RAT_C2K = 8<BR>MMRF_UNI_RAT_4G = 16<BR>MMRF_UNI_RAT_5G = 32<BR>MMRF_UNI_RAT_5G_FR2 = 64<BR><BR>MMRF_UNI_RAT_4G_5G = 48,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10619,57370,NVRAM_EF_NL1_SAR_SETTING_LID,1,sar_tbl_ant,sar_1rgn_db[0~19].sar_1rgn_node.sar_tbl[0~11].sar_tbl_ant,OTA,no,no,yes,no,NR only SAR table,UNSIGNED CHAR,20,20,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,SAR Mitigation,RF_Proprietary,,,"Test in machine (N)<BR>Test Time (30 minutes)<BR>[Init]<BR>prepare internal phone and environment<BR>[Test Step]<BR>1. build pass and get load<BR>2. NVRAM editor can write/read normally<BR>3. MCF UT framework test pass, OTA is normal<BR>[Expected Result]<BR>MCF OTA is normal",Untested,,,,
+10620,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_CT_ENTER_LIMITED_WHEN_DISABLE_C2K_VOPS,modem_sbp_config[130].SBP_CT_ENTER_LIMITED_WHEN_DISABLE_C2K_VOPS,OTA and OTA BY OP,no,no,no,yes,"CT would enter limited service if users disable C2K and VoPS ability. Currently, it only applies on protocol 2.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable this feature<BR>0<BR>:disable this feature,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10621,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_URSP_EVAL_SUPPORT,modem_sbp_config[130].SBP_URSP_EVAL_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"With the feature enabled, MOD_URSP evaluates non-default rules. Otherwise, MOD_URSP ignores them, and then applies UE local configurations and the default rule.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10622,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[130].SBP_URSP_RULE_SUPPORT,modem_sbp_config[130].SBP_URSP_RULE_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"With the feature enabled, MOD_UPDS passes UE policies to MOD_URSP. Otherwise, MOD_UPDS doesn`t.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10625,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_CONFIG_ENDC_COMB_BY_SBPID,modem_sbp_config[131].SBP_CONFIG_ENDC_COMB_BY_SBPID,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to enable the feature - configure SA & ENDC combination by SBP ID. <BR> User can set the white SA or ENDC combination list to report the ENDC combination which they want by SBP ID.<BR> 1. UE reports the configured ENDC CA combination in UE MR-DC Capability.<BR> 2. UE reports the configured SA CA combination in UE-NR-Capability.<BR> <BR> Both combinations can be set in "sbp_nvram_nrrc_config.c"<BR><BR>The maximum number of allowed endc combinations is 32.<BR>The maximum number of allowed SA combinations is 32.<BR><BR> if compile option __SBP_CONFIG_ENDC_COMB_BY_SBPID__ is defined, the SBP is enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,NA,,,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Untested,,,,
+10627,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_CT_HVOLTE_DEFAULT_VOPS_MODE,modem_sbp_config[131].SBP_CT_HVOLTE_DEFAULT_VOPS_MODE,OTA and OTA BY OP,no,no,no,yes,"If the SBP is on, default CT hVolte mode is VoPS",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,N/A,MD Config,Modem - Customer Requirement,,,N,Pass,,,,
10628,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_upgrade_if_more_than_1_call,ua_config.reject_upgrade_if_more_than_1_call,OTA and OTA BY OP,no,no,no,no,Reject local/remote upgrade if there are more than 1 call<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1:0:Disable<BR>1:Enable,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
10629,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_upgrade_if_more_than_1_call.reject_upgrade_if_more_than_1_call,ua_config.reject_upgrade_if_more_than_1_call.reject_upgrade_if_more_than_1_call,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>Reject local/remote upgrade if there are more than 1 call<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1:0:Disable<BR>1:Enable,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
10630,60946,NVRAM_EF_ERRC_GLOBAL_BAND_CA_CUSTOM_PLMN_LID,1,feature_switch,feature_switch,OTA,no,no,no,no,[MCF] Activate global band CA customization,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"int/short/long: 0x00,0x01",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
@@ -9428,15 +9428,15 @@
10632,60946,NVRAM_EF_ERRC_GLOBAL_BAND_CA_CUSTOM_PLMN_LID,1,cfg_id,plmn[0~199].cfg_id,OTA,no,no,no,no,"[MCF] Config ID, valid value is 0 to 29",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~29,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10636,2945,NVRAM_EF_USB_MODE_LID,1,mode_id,mode_id,OTA,no,no,no,no,[MCF]USB vendor mode id,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0~99:depend on how many modes defined by the customer,,,,USB-DRV,Driver,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check<BR>[Expected Result] LID value has changed",Pass,,,,
10637,2945,NVRAM_EF_USB_MODE_LID,1,owner_id,owner_id,OTA,no,no,no,no,[MCF]USB vendor owner id,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0~99:depend on how many vendors defined by the customers,,,,USB-DRV,Driver,,,"Test in machine (N)<BR>Test Time (minutes) 10<BR>[Init] According to RD IT SOP<BR>[Test Step] LID value change to OTA file, OTA file push to Android file system, OTA file browse, LID value change check",Pass,,,,
-10639,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_FLIGHT_MODE_RESET_T3402,modem_sbp_config[131].SBP_FLIGHT_MODE_RESET_T3402,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reset T3402 to default value when toggle flight mode<BR>bit 0:0:Not reset T3402<BR>bit 1:1:Reset T3402",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,,LTE Protocol (R13 Baseline),4G,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+10639,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_FLIGHT_MODE_RESET_T3402,modem_sbp_config[131].SBP_FLIGHT_MODE_RESET_T3402,OTA and OTA BY OP,no,no,no,yes,"Some operator requires to reset T3402 to 3GPP spec default value 12 mins after toggle flight. In 3GPP spec, it is not required to reset T3402 to default. Hence, it is possible that UE may keep using T3402 got from network previously before toggle flight mode. This feature provides an option to achieve operator's requirement on clear T3402 to default after flight mode.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,"If compile option __FLIGHT_MODE_RESET_T3402__ is defined, the SBP is enabled",LTE Protocol (R13 Baseline),4G,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10652,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,HPUEBand,HPUEBand,OTA,no,no,no,no,[MCF]LTE Band Supporting HPUE,ENUM,5,5,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:LTE Band ENUM,,,,Power Class,HPUE,,,,Untested,,,,
10653,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,HPUEEna,HPUEEna,OTA,no,no,no,no,"[MCF]0: HPUE OFF, 1: HPUE ON",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0 for OFF & 1 for ON,,,,Power Class,HPUE,,,,Untested,,,,
-10654,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,band,HPUE_CLASS2_CA[0~19].band_param[0~3].band,OTA,no,no,no,no,[MCF]Band,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:LTE Band ENUM,,,,Power Class,HPUE,,,,Untested,,,,
+10654,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,band,HPUE_CLASS2_CA[0~19].band_param[0~3].band,OTA,no,no,no,no,[MCF]Band,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:LTE Band ENUM,,,,Power Class,HPUE,,,,Pass,,,,
10655,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,ca_bw_clas_dl,HPUE_CLASS2_CA[0~19].band_param[0~3].ca_bw_clas_dl,OTA,no,no,no,no,[MCF]DL BW Class,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~6:LTE BW ENUM,,,,Power Class,HPUE,,,,Untested,,,,
10656,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,ca_bw_clas_ul,HPUE_CLASS2_CA[0~19].band_param[0~3].ca_bw_clas_ul,OTA,no,no,no,no,[MCF]UL BW Class,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~6:LTE BW ENUM,,,,Power Class,HPUE,,,,Untested,,,,
-10657,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,band_param_num,HPUE_CLASS2_CA[0~19].band_param_num,OTA,no,no,no,no,[MCF]Number of bands in this CA,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~5,,,,Power Class,HPUE,,,,Untested,,,,
-10658,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,num_of_HPUE_CLASS2_CA,num_of_HPUE_CLASS2_CA,OTA,no,no,no,no,[MCF]Number of LTE CA Supporting HPUE,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~20:Number of CA supporting HPUE,,,,Power Class,HPUE,,,,Untested,,,,
-10660,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_ENDC_PREFER_A2_ENH,modem_sbp_config[131].SBP_ENDC_PREFER_A2_ENH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>enable A2 report enhancement for ENDC cell<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,Option 3,5G Architecture,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+10657,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,band_param_num,HPUE_CLASS2_CA[0~19].band_param_num,OTA,no,no,no,no,[MCF]Number of bands in this CA,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~5,,,,Power Class,HPUE,,,,Pass,,,,
+10658,60583,NVRAM_EF_EL1_HPUE_PARAMETER_LID,1,num_of_HPUE_CLASS2_CA,num_of_HPUE_CLASS2_CA,OTA,no,no,no,no,[MCF]Number of LTE CA Supporting HPUE,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~20:Number of CA supporting HPUE,,,,Power Class,HPUE,,,,Pass,,,,
+10660,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_ENDC_PREFER_A2_ENH,modem_sbp_config[131].SBP_ENDC_PREFER_A2_ENH,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,Option 3,5G Architecture,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
10662,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",extended_num_of_drbs_r15,extended_num_of_drbs_r15,OTA and OTA BY OP,no,no,no,no,[MCF] 3GPP TS 36.331 v15.3.0: extendedNumberOfDRBs-r15. Indicates whether the UE supports up to 15 DRBs. The UE shall support any combination of RLC AM and RLC UM entities for the configured DRBs. A UE that supports extendedNumberOfDRBs-r15 shall also support the extended LCID.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,R15 baseline 5G,5G Baseline,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
10663,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",extended_num_of_drbs_r15.Extended_num_of_drbs_r15,extended_num_of_drbs_r15.Extended_num_of_drbs_r15,OTA and OTA BY OP,no,no,no,no,[MCF] 3GPP TS 36.331 v15.3.0: extendedNumberOfDRBs-r15. Indicates whether the UE supports up to 15 DRBs. The UE shall support any combination of RLC AM and RLC UM entities for the configured DRBs. A UE that supports extendedNumberOfDRBs-r15 shall also support the extended LCID.<BR>Use 0 or 1 to indicate<BR>bit 0:0:Not supported<BR>bit 1:1:Supported,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,R15 baseline 5G,5G Baseline,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
10664,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",extended_lcid_duplication_r15,mac_param_v1530.extended_lcid_duplication_r15,OTA and OTA BY OP,no,no,no,no,[MCF] 3GPP TS 36.331 extendedLCID-Duplication-r15. Indicates whether the UE supports use of extended LCIDs 32-38 for PDCP duplication. A UE that supports extendedLCID-Duplication-r15 shall also support the extended LCID.,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,R15 baseline 5G,5G Baseline,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in NVRAM,Untested,,,,
@@ -9446,11 +9446,11 @@
10668,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",conn_est_fail_count,conn_est_fail_control_params.conn_est_fail_count,OTA and OTA BY OP,no,no,no,no,Connection establishment failure count,UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,"1~4:Valid values are 1, 2, 3 and 4.",,,,Option 2,5G Architecture,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10669,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",conn_est_fail_offset,conn_est_fail_control_params.conn_est_fail_offset,OTA and OTA BY OP,no,no,no,no,"Connection establishment failure offset, 0xFF means infinity",UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~15:Valid values are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 and 15.",,,,Option 2,5G Architecture,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
10670,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",conn_est_fail_offset_validity,conn_est_fail_control_params.conn_est_fail_offset_validity,OTA and OTA BY OP,no,no,no,no,Connection establishment failure offset validity in seconds,UNSIGNED SHORT,2,,,"0x2c, 0x01,",NR15.R3.MD700.IVT.MP1MR3.MP,,"30,60,120,240,300,420,600,900:Valid values are 30, 60, 120, 240, 300, 420, 600 and 900.",,,,Option 2,5G Architecture,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-10671,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_NRRC_CONN_EST_FAILURE_CONTROL_PARAMS,modem_sbp_config[131].SBP_NRRC_CONN_EST_FAILURE_CONTROL_PARAMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set value to NR RRC connection establishment failure control parameters in case they are not available in SIB1.<BR>bit 0:0:Enhancement disabled<BR>bit 1:1:Enhancement enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled.,,,,Option 2,5G Architecture,,,Test in machine (Y)<BR>Test Time (minutes) - no idea<BR>[Init]<BR>power up UE.<BR>[Test Step]<BR>Make connection establishment fail <BR>[Expected Result]<BR>See 38.331 for ConnEstFailureControl.,Untested,,,,
+10671,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_NRRC_CONN_EST_FAILURE_CONTROL_PARAMS,modem_sbp_config[131].SBP_NRRC_CONN_EST_FAILURE_CONTROL_PARAMS,OTA and OTA BY OP,no,no,no,yes,"Set value to NR RRC connection establishment failure control parameters in case they are not available in SIB1.<BR>If this SBP is turn ON, and SIB1 does not contain these parameters, values are read from NVRAM.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled.,,,N/A,Option 2,5G Architecture,,,Test in machine (Y)<BR>Test Time (minutes) - no idea<BR>[Init]<BR>power up UE.<BR>[Test Step]<BR>Make connection establishment fail <BR>[Expected Result]<BR>See 38.331 for ConnEstFailureControl.,Untested,,,,
10672,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",initial_rove_in_trtl_time,comm_ans_cfg.trtl_cfg.initial_rove_in_trtl_time,OTA and OTA BY OP,no,no,no,no,[MCF]Duration of throttling first handover after IMS or Emergency PDN activation,UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,Only valid if initial_trtl_enable is TRUE,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"Test in machine (Y)<BR>Test Time (20)<BR>[Init]<BR>LTE attached<BR>WiFi preferred<BR>[Test Step]<BR>Enable WiFi<BR>Enable IMS before WiFi connection is ready<BR>[Expected Result]<BR>VoLTE icon on first, handover to VoWiFi after initial_rove_in_trtl_time seconds have passed",Pass,,,,
10673,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",initial_trtl_enable,comm_ans_cfg.trtl_cfg.initial_trtl_enable,OTA and OTA BY OP,no,no,no,no,"[MCF]When enabled, throttling first handover after IMS or Emergency PDN activation for initial_rove_in_trtl_time",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,TRUE/FALSE (1/0):values and format please reference to param. description,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"Test in machine (Y)<BR>Test Time (20)<BR>[Init]<BR>LTE attached<BR>WiFi preferred<BR>[Test Step]<BR>Enable WiFi<BR>Enable IMS before WiFi connection is ready<BR>[Expected Result]<BR>VoLTE icon on first, handover to VoWiFi after initial_rove_in_trtl_time seconds have passed",Pass,,,,
-10674,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,modem_sbp_config[131].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do LTE backround search, when Serving cell priority is not present<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10676,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_FORCE_RECONFIG_REJ_LOCAL_REL,modem_sbp_config[131].SBP_FORCE_RECONFIG_REJ_LOCAL_REL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reject reconfiguration message from NW and local RRC connection release<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+10674,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,modem_sbp_config[131].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,OTA and OTA BY OP,no,no,no,yes,"Trigger background search when all instances of SI2 quater are collected, if the LTE neighbour list contains valid freq, but the Serving cell priority does not exist.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+10676,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_FORCE_RECONFIG_REJ_LOCAL_REL,modem_sbp_config[131].SBP_FORCE_RECONFIG_REJ_LOCAL_REL,OTA and OTA BY OP,no,no,no,yes,"This SBP when enabled RRCE shall reject reconfiguration message from NW, when CS call released and SCRI triggered as part of EAFR.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,If __DISABLE_SBP_FORCE_RECONFIG_REJ_LOCAL_REL__ is defined it would be disabled; otherwise the enhancement is enabled by default.,,,,,,Untested,,,,
10677,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,num_of_entry,num_of_entry,OTA,no,no,no,yes,"[MCF,RUNTIME]Number of valid entries",UNSIGNED INT,4,,,"0x37, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10678,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,cap_status,op_vg_config_list[0~299].cap_status,OTA,no,no,no,yes,disable or enable 5G option capability,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10679,2374,NVRAM_EF_MRS_VG_ROAMING_CONFIG_LID,1,mcc1,op_vg_config_list[0~299].hplmn.mcc1,OTA,no,no,no,yes,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -9490,20 +9490,20 @@
10716,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_audio_rtp_for_crs_timer_timeout,ua_config.wait_audio_rtp_for_crs_timer_timeout,OTA and OTA BY OP,no,no,no,no,"After CRS (MT early media) has been turned on, timer will be started. If no audio rtp could be received till timer expiries, MD will notify this event to AP (via +ECPI 7)<BR>0:Disable<BR>Unit:sec<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
10722,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stop_crs_if_no_video_or_audio.stop_crs_if_no_video_or_audio,ua_config.stop_crs_if_no_video_or_audio.stop_crs_if_no_video_or_audio,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>If the result of SDP negoitation for CRS is audio only, then MD will not enable CRS. If the result of SDP negoitation for CRS is video+audio, however no audio rtp could be received till wait_audio_rtp_for_crs_timer timeout, MD will notify AP to turn off CRS.<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10723,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_audio_rtp_for_crs_timer_timeout.wait_audio_rtp_for_crs_timer_timeout,ua_config.wait_audio_rtp_for_crs_timer_timeout.wait_audio_rtp_for_crs_timer_timeout,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>After CRS (MT early media) has been turned on, timer will be started. If no audio rtp could be received till timer expiries, MD will notify this event to AP (via +ECPI 7).<BR>bit 0:0:Disable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-10724,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_DISABLE_SIM_RECOVERY_TIMER_WHEN_PLUG_OUT,modem_sbp_config[131].SBP_DISABLE_SIM_RECOVERY_TIMER_WHEN_PLUG_OUT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable the sim recovery timer when final card state is plug out<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10724,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[131].SBP_DISABLE_SIM_RECOVERY_TIMER_WHEN_PLUG_OUT,modem_sbp_config[131].SBP_DISABLE_SIM_RECOVERY_TIMER_WHEN_PLUG_OUT,OTA and OTA BY OP,no,no,no,yes,This SBP is to disable the sim recovery timer if the final card state is plug out.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,This feature default value is controlled by __DISABLE_SIM_RECOVERY_TIMER_WHEN_PLUG_OUT__.,MD Config,Modem - Customer Requirement,,,,Pass,,,,
10726,57387,NVRAM_EF_NL1_SB_HPUE_SETTING_LID,1,sb_hpue_capability,sb_hpue_data[0~29].sb_hpue_capability,OTA,no,no,no,no,single band HPUE capability,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
10727,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,ca_hpue_capability,mrdc_hpue_data[0~999].ca_hpue_capability,OTA,no,no,no,no,ENDC HPUE capability,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
10728,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,eutra_hpue_capability,mrdc_hpue_data[0~999].eutra_hpue_capability,OTA,no,no,no,no,LTE part HPUE capability of ENDC,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
10729,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,idx,mrdc_hpue_data[0~999].idx,OTA,no,no,no,no,ENDC CA index (need to refer to ue capability),UNSIGNED INT,4,,,0xFFFFFFFF,NR15.R3.MD700.IVT.MP1MR3.MP,,0~999,,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
-10732,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,modem_sbp_config[132].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do LTE backround search, when Serving cell priority is not present<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10733,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR,modem_sbp_config[132].SBP_MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Increment abnormal count after reject with cause#22<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Based on RRC AS release indicator decide to increment abnormal count after reject with cause#22.<BR><BR>1:Increment abnormal count after reject with cause#22,,,"if compile option __MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR__ is defined, the SBP is enabled.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] NA<BR>[Test Step] Run AT&T test case LTE-BTR-1-1824<BR>[Expected Result] LTE-BTR-1-1824 should pass,Pass,,,,
-10735,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST,modem_sbp_config[132].SBP_CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Update TMO_US live network PLMN's as defined in custom array CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Untested,,,,
+10732,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,modem_sbp_config[132].SBP_GAS_ENABLE_LTE_BG_SRCH_WHEN_NO_SERV_PRIO_PRESENT,OTA and OTA BY OP,no,no,no,yes,"Trigger background search when all instances of SI2 quater are collected, if the LTE neighbour list contains valid freq, but the Serving cell priority does not exist.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+10733,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR,modem_sbp_config[132].SBP_MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR,OTA and OTA BY OP,no,no,no,yes,"This SBP item is designed for controlling behavior of device when receiving reject cause 22 Congestion.<BR>When it is enabled, device will follow Release 11 behavior to set abnormal counter to maximal value.<BR>If disabled, when UE is FDD mode, on receiving reject cause 22 Congestion, the device NAS behavior shall based on RRC AS Release indicator.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Based on RRC AS release indicator decide to increment abnormal count after reject with cause#22.<BR><BR>1:Increment abnormal count after reject with cause#22,,,"if compile option __MM_REL11_LR_REJ_CONGESTION_IGNORE_RRC_RELEASE_INDICATOR__ is defined, the SBP is enabled.",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins <BR>[Init] NA<BR>[Test Step] Run AT&T test case LTE-BTR-1-1824<BR>[Expected Result] LTE-BTR-1-1824 should pass,Pass,,,,
+10735,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST,modem_sbp_config[132].SBP_CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST,OTA and OTA BY OP,no,no,no,yes,"When TMO legacy SIM that does not contain any TMO network PLMN's in EHPLMN list on SIM but just 001010 (HPLMN), which led the UE to consider simulator<BR>configured PLMN (310XXX) as VPLMN and operator test cases failed. Upon confirmation from operator, MTK has provided a custom array option<BR>for such TMO legacy SIM's in which the network operator has not updated the EHPLMN values correctly but yet regard them as TMO SIM cards.<BR>This SBP should only be used for customer specific branches/loads belonging to TMO and problem resulting from the use of old legacy TMO SIM cards.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __CUSTOM_TMO_LEGACY_SIM_EHPLMN_LIST__ is defined, the SBP is enabled.",MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Untested,,,,
10737,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ecc_use_normal_pcscf,imc_config.ecc_use_normal_pcscf,OTA and OTA BY OP,no,no,yes,no,"Control If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used<BR>0:Disable<BR>1:Enale<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"bit: 0/1:0:Disable, 1:Enable<BR><BR>0:Disable<BR>1:Enale",,,,IMS,IMS,,,"1. set ecc_use_normal_pcscf =1<BR>2. do IMS emergency call, NW build emergency PDN, but no P-CSCF address in it.<BR>3. a P-CSCF address for a normal call shall be used.<BR>4.expected: IMS emergency registration success, emergency call success.",Untested,,,,
10738,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ecc_use_normal_pcscf.ecc_use_normal_pcscf,imc_config.ecc_use_normal_pcscf.ecc_use_normal_pcscf,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>Control If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used<BR>bit 0:0:Disable<BR>bit 1:1:Enale",BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,"bit: 0/1:Control If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used<BR>0:Disable<BR>1:Enale",,,,IMS,IMS,,,"[Init]<BR>UE register IMS.<BR>[Test Step]<BR>1. conditions: NW support control that If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used. set ecc_use_normal_pcscf =1. 2.dial emergency call. <BR>[Expected Result]If no P-CSCF address for emergency is received from the network, a P-CSCF address for a normal call shall be used.",Untested,,,,
-10739,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_MODIFY_CEER_CAUSE_RR_CONN_REL,modem_sbp_config[132].SBP_MODIFY_CEER_CAUSE_RR_CONN_REL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Modify ceer cause for RLF<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+10739,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_MODIFY_CEER_CAUSE_RR_CONN_REL,modem_sbp_config[132].SBP_MODIFY_CEER_CAUSE_RR_CONN_REL,OTA and OTA BY OP,no,no,no,yes,"Due to the Radio link failure, and the emergency call was not connected,the CEER value of CM_MM_RR_CONN_RELEASE(2165)<BR>reported to the AP shall be changed to cause value 2186(CM_MM_RLF_BEFORE_ECC_CONNECT) so that AP can retry the ecc call.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
10740,57387,NVRAM_EF_NL1_SB_HPUE_SETTING_LID,1,idx,sb_hpue_data[0~29].idx,OTA,no,no,no,no,Single band CA index (need to refer to ue capability),UNSIGNED INT,4,,,0xFFFFFFFF,NR15.R3.MD700.IVT.MP1MR3.MP,,0~29,,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
-10741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[161].SBP_VOLTE_A5_THRESH_MODIFY,modem_sbp_config[161].SBP_VOLTE_A5_THRESH_MODIFY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Session will not be protected to reseve the resources<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-10742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_GMSS_USCC_HANDLING,modem_sbp_config[132].SBP_GMSS_USCC_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable USCC handling in GMSS module logic<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disabled<BR>1: enabled,,,,MD Config,Modem - Customer Requirement,,,Follow SBP value setting check. To set in the NVRAM editor and check in OM project,Untested,,,,
+10741,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[161].SBP_VOLTE_A5_THRESH_MODIFY,modem_sbp_config[161].SBP_VOLTE_A5_THRESH_MODIFY,OTA and OTA BY OP,no,no,no,yes,Prevent handover to weak signal cell during the call.<BR>Modify abnormal A5 threshold to reduce A5 sending.<BR>.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,IMS,IMS,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+10742,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_GMSS_USCC_HANDLING,modem_sbp_config[132].SBP_GMSS_USCC_HANDLING,OTA and OTA BY OP,no,no,no,yes,"If this SBP enabled, GMSS would set MPSR timer value as customer wants for USCC, when MPSR timer expired, GMSS would perform More Prefer System Reselection.<BR>This SBP will be used for GMSS module to check whether USCC specific behavior shall be performed in the future.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: disabled<BR>1: enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Follow SBP value setting check. To set in the NVRAM editor and check in OM project,Pass,,,,
10743,3136,NVRAM_EF_THERMAL_SENSOR_INFO_LID,1,hws_temp,hws_temp,OTA,no,no,no,no,[MCF]HW shutdown temperature in 1/10th of Celsius Degrees,UNSIGNED INT,4,,,1150,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~9999:unit in 1/10th of Celsius Degrees,,,MD_TFWK,MD_TFWK,Driver,,,Test in machine (Y)<BR>Test Time (wait system reset)<BR>[Init] set hws_temp as X (in 1/10th of Celsius Degrees)<BR>[Test Step] manually heat corresponding NTC sensor<BR>[Expected Result] system will reset when NTC temperature over X,Untested,,,,
10744,3136,NVRAM_EF_THERMAL_SENSOR_INFO_LID,1,max_temp,max_temp,OTA,no,no,no,no,[MCF]Sensor maximum temperature in 1/10th of Celsius Degrees,UNSIGNED INT,4,,,1150,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~9999:unit in 1/10th of Celsius Degrees,,,MD_TFWK,MD_TFWK,Driver,,,"Test in machine (Y)<BR>Test Time (wait ilm message, MSG_ID_L5_THERMAL_STATE_INFO_IND)<BR>[Init] set max_temp as X (in 1/10th of Celsius Degrees)<BR>[Test Step] manually heat corresponding NTC sensor<BR>[Expected Result] send ilm message when NTC temperature over X",Untested,,,,
10745,3136,NVRAM_EF_THERMAL_SENSOR_INFO_LID,1,warn_temp,warn_temp,OTA,no,no,no,no,[MCF]Warning temperature in 1/10th of Celsius Degrees,INT,4,,,9999,NR15.R3.MD700.IVT.MP1MR3.MP,,int:-400~9999:unit in 1/10th of Celsius Degrees,,,MD_TFWK,MD_TFWK,Driver,,,"Test in machine (Y)<BR>Test Time (wait ilm message, MSG_ID_L5_THERMAL_STATE_INFO_IND)<BR>[Init] set warn_temp as X (in 1/10th of Celsius Degrees)<BR>[Test Step] manually heat corresponding NTC sensor<BR>[Expected Result] send ilm message when NTC temperature over X",Untested,,,,
@@ -9523,24 +9523,24 @@
10760,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",deactivate_video_when_early_media_off.deactivate_video_when_early_media_off,imc_config.deactivate_video_when_early_media_off.deactivate_video_when_early_media_off,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>Deactivate video when early media is set off<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~1:0:Disable<BR>1:Enable,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10761,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.b1,ua_config.support_video_early_media.b1,OTA and OTA BY OP,no,no,no,no,[MCF]To enable the video early media feature<BR>video ringback tone (default 0),BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0:Not support video CAT (Customized Alerting Tone)<BR>1:Support video CAT,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
10762,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.b2,ua_config.support_video_early_media.b2,OTA and OTA BY OP,no,no,no,no,[MCF]To enable the video early media feature<BR>video ringing tone (default 0),BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0:Not support video CRS (Customized Ringing Signal)<BR>1:Support video CRS,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-10763,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.b3,ua_config.support_video_early_media.b3,OTA and OTA BY OP,no,no,no,no,[MCF]To enable the video early media feature<BR>reserved,BIT,6,,6,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:reserved,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-10765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_NR_CA,modem_sbp_config[132].SBP_NR_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR Carrier Aggregation Operation<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:1: NR CA supported, 0: NR CA not supported",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-10766,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,amprData,ampr_by_band[0~239].amprData,OTA,no,no,no,no,"[MCF]AMPR value, unit is 1/256 dB",UNION,200,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10767,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,aseIdx,ampr_by_band[0~239].aseIdx,OTA,no,no,no,no,[MCF]additional spectrum Emission index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10768,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,bandIdx,ampr_by_band[0~239].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10769,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,nsIdx,ampr_by_band[0~239].nsIdx,OTA,no,no,no,no,[MCF]NS index,ENUM,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10770,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,bandIdx,mpr_by_band[0~39].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10771,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,mpr_lut_pwrcls2,mpr_by_band[0~39].mpr_lut_pwrcls2,OTA,no,no,no,no,"[MCF]Power class 2 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10772,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,mpr_lut_pwrcls3,mpr_by_band[0~39].mpr_lut_pwrcls3,OTA,no,no,no,no,,UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10773,57374,NVRAM_EF_NL1_OFFSETENDC_LID,1,offset_pwr_endc,offset_pwr_endc,OTA,no,no,no,no,"[MCF]manually increased ENDC power, unit is dB",SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10774,57381,NVRAM_EF_NL1_OFFSETNRSA_LID,1,bandIdx,offset_pwr_sa_by_band[0~39].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10775,57381,NVRAM_EF_NL1_OFFSETNRSA_LID,1,offset_pwr_sa_only,offset_pwr_sa_by_band[0~39].offset_pwr_sa_only,OTA,no,no,no,no,"[MCF]the power is negative and used to reduce tx pwr in sa only case, unit is 1/256 dB",SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10776,57373,NVRAM_EF_NL1_OFFSETNR_LID,1,offset_pwr_nr_fr1,offset_pwr_nr_fr1,OTA,no,no,no,no,"[MCF]the power which exceeds the p_nr_fr1 limit, unit is dB",SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-10786,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_NR_BAND_SUPPORT_SPOOFING,modem_sbp_config[132].SBP_NR_BAND_SUPPORT_SPOOFING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR band support spoofing<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: FALSE; 1: TRUE,,,,MD Config,Modem - Customer Requirement,,,"Set NR band n78 as supported in NSA and SA, but n77 as supported in NSA only. Perform power on and initial attach, check UE-NR-Capability content.",Pass,,,,
+10763,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.b3,ua_config.support_video_early_media.b3,OTA and OTA BY OP,no,no,no,no,[MCF]To enable the video early media feature<BR>reserved,BIT,6,,6,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:reserved,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+10765,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_NR_CA,modem_sbp_config[132].SBP_NR_CA,OTA and OTA BY OP,no,no,no,yes,"Carrier Aggregation. This feature is used to control if UE supports NR CA Feature.<BR>Aggregation of two or more component carriers in order to support wider transmission bandwidths.<BR>UE will report supported CA combination to network, and network might configure Scell to UE.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:1: NR CA supported, 0: NR CA not supported",,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+10766,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,amprData,ampr_by_band[0~239].amprData,Not Support,no,no,no,no,"[MCF]AMPR value, unit is 1/256 dB",UNION,200,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
+10767,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,aseIdx,ampr_by_band[0~239].aseIdx,OTA,no,no,no,no,[MCF]additional spectrum Emission index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,array: {0~7},,,,R15 baseline 5G,5G Baseline,,,"use NVRAM editor, change ampr related parameters and see result",Untested,,,,
+10768,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,bandIdx,ampr_by_band[0~239].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,array: {RF supported band},,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if ampr is applied as expected,Untested,,,,
+10769,57360,NVRAM_EF_NL1_AMPRADJTBL_LID,1,nsIdx,ampr_by_band[0~239].nsIdx,OTA,no,no,no,no,[MCF]NS index,ENUM,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,0~7,,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if ampr is applied as expected,Untested,,,,
+10770,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,bandIdx,mpr_by_band[0~39].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~99, band index",,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if mpr is applied as expected,Untested,,,,
+10771,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,mpr_lut_pwrcls2,mpr_by_band[0~39].mpr_lut_pwrcls2,Not Support,no,no,no,no,"[MCF]Power class 2 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
+10772,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,mpr_lut_pwrcls3,mpr_by_band[0~39].mpr_lut_pwrcls3,Not Support,no,no,no,no,,UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
+10773,57374,NVRAM_EF_NL1_OFFSETENDC_LID,1,offset_pwr_endc,offset_pwr_endc,OTA,no,no,no,no,"[MCF]manually increased ENDC power, unit is dB",SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,0~6,,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if endc total pwr is applied as expected,Untested,,,,
+10774,57381,NVRAM_EF_NL1_OFFSETNRSA_LID,1,bandIdx,offset_pwr_sa_by_band[0~39].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~99, band index",,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if SA pcmax is applied as expected,Untested,,,,
+10775,57381,NVRAM_EF_NL1_OFFSETNRSA_LID,1,offset_pwr_sa_only,offset_pwr_sa_by_band[0~39].offset_pwr_sa_only,OTA,no,no,no,no,"[MCF]the power is negative and used to reduce tx pwr in sa only case, unit is 1/256 dB",SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~6, pcmax offset",,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if sa pcmax offset is applied as expected,Untested,,,,
+10776,57373,NVRAM_EF_NL1_OFFSETNR_LID,1,offset_pwr_nr_fr1,offset_pwr_nr_fr1,OTA,no,no,no,no,"[MCF]the power which exceeds the p_nr_fr1 limit, unit is dB",SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,0~6,,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if p_nr_fr1 offset is applied as expected,Untested,,,,
+10786,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_NR_BAND_SUPPORT_SPOOFING,modem_sbp_config[132].SBP_NR_BAND_SUPPORT_SPOOFING,OTA and OTA BY OP,no,no,no,yes,"NR band support spoofing takes effect in capability signaling level merely. This SBP switch is used for NR band support spoofing function control.<BR>When it is enabled, by judging actual RF custom settings, a virtual NR supported band capability could be reported in order to resolve known interoperability issue.<BR>If it's disabled, there is no capability change in NR band support (AS IS).",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: FALSE; 1: TRUE,,,If __DISABLE_NR_BAND_SUPPORT_SPOOFING__ is defined it would be disabled; Otherwise the function is enabled by default.,MD Config,Modem - Customer Requirement,,,"Set NR band n78 as supported in NSA and SA, but n77 as supported in NSA only. Perform power on and initial attach, check UE-NR-Capability content.",Pass,,,,
10787,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pcell_bad_pingpong_offset,pcell_bad_pingpong_offset,OTA and OTA BY OP,no,no,no,no,[MCF]Customized offset for pingpong offset when PCell RSRQ is not better than threshold. (qdB),SHORT,2,,,"0x08, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10788,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pcell_good_pingpong_offset,pcell_good_pingpong_offset,OTA and OTA BY OP,no,no,no,no,[MCF]Customized offset for pingpong offset when PCell RSRQ is better than threshold. (qdB),SHORT,2,,,"0x08, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10789,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pcell_rsrq_pingpong_th,pcell_rsrq_pingpong_th,OTA and OTA BY OP,no,no,no,no,[MCF]Customized threshold of PCell RSRQ to judge which pingpong offset is applied (good or bad offset). (qdB),SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10795,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_REPORTING_MODE_FOR_CSCON,modem_sbp_config[124].SBP_REPORTING_MODE_FOR_CSCON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Default reporting mode for +CSCON<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+10795,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[124].SBP_REPORTING_MODE_FOR_CSCON,modem_sbp_config[124].SBP_REPORTING_MODE_FOR_CSCON,OTA and OTA BY OP,no,no,no,yes,Reporting mode for +CSCON URC.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
10798,60426,NVRAM_EF_EL1_AMPRADJTBLCA_LID,1,amprData,ampr_by_band_ca[0~7].amprData,Not Support,no,no,no,no,"[MCF] AMPR CA value, unit is 1/256 dB",UNION,48,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10799,60426,NVRAM_EF_EL1_AMPRADJTBLCA_LID,1,amprIdx,ampr_by_band_ca[0~7].amprIdx,Not Support,no,no,no,no,[MCF] NS index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10800,60426,NVRAM_EF_EL1_AMPRADJTBLCA_LID,1,bandIdx,ampr_by_band_ca[0~7].bandIdx,Not Support,no,no,no,no,[MCF] Band index,ENUM,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -9606,38 +9606,38 @@
10860,60542,NVRAM_EF_EL1_MPR_HPUE_CA_FEATURE_LID,1,res_Hndlr,mpr_by_band_hpue_ca[0~34].res_Hndlr,OTA,no,no,no,no,[MCF] reserved bits,UNSIGNED SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10861,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",accept_wifi_call_if_audio_cap_0,ua_config.accept_wifi_call_if_audio_cap_0,Not Support,no,no,no,no,"This is to accept incoming WIFi call when WFC is disabled and voice WiFi capability is disabled.<BR>0: Align with VOLTE operation, reject incoming call if audio capability is disabled.<BR>1: Ignore audio capability setting when it is a wifi call.<BR>0: Align with VOLTE operation, reject incoming call if audio capability is disabled.<BR>1: Ignore audio capability setting when it is a wifi call.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"1: audio capability can be ignored for incoming wifi call<BR>0:Align with VOLTE operation, reject incoming call if audio capability is disabled<BR>1:Ignore audio capability setting when it is a wifi call",,,,IMS,IMS,,,disable audio capability and then make wifi call to the device<BR>The device shall be able to accept it,Untested,,,,
10862,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",accept_wifi_call_if_audio_cap_0.accept_wifi_call_if_audio_cap_0,ua_config.accept_wifi_call_if_audio_cap_0.accept_wifi_call_if_audio_cap_0,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>This is to accept incoming WiFi call when WFC is disable and voice wifi capability is disabled.<BR>bit 0:0:Align with VoLTE operation, reject incoming call if audio capability is disabled.<BR>bit 1:1:Ignore audio capability setting when it is a wifi call.",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: audio capability shall be checked for wifi call 1: audio capability can be ignored for incoming wifi call<BR>1:audio capability can be ignored for incoming wifi call<BR>0:audio capability shall be checked for wifi call,,,,IMS,IMS,,,disable audio capability and then make wifi call to the device<BR>The device shall be able to accept it,Untested,,,,
-10863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_EMM_DISABLE_SR_REJECT_LOCAL_REL_CONN,modem_sbp_config[132].SBP_EMM_DISABLE_SR_REJECT_LOCAL_REL_CONN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM disable Service Reject local release connection<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:If Value equals to 0 means EMM will local release connection when receiving Service Reject with abnormal cause;<BR>Else, EMM won't local release connection in such scenario",,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Check CA with RF capability<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-10868,60425,NVRAM_EF_EL1_AMPRADJTBL_LID,1,amprData,ampr_by_band[0~34].amprData,OTA,no,no,no,no,"[MCF] AMPR value, unit is 1/256 dB",UNION,48,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10863,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_EMM_DISABLE_SR_REJECT_LOCAL_REL_CONN,modem_sbp_config[132].SBP_EMM_DISABLE_SR_REJECT_LOCAL_REL_CONN,OTA and OTA BY OP,no,no,no,yes,This SBP feature option is used to disable EMM local release connection when SERVICE REJECT receive as defined in 24.301 5.6.1.6(e).,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0/1:If Value equals to 0 means EMM will local release connection when receiving Service Reject with abnormal cause;<BR>Else, EMM won't local release connection in such scenario",,,N/A,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+10866,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[132].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,This SBP switch is used to control LTE CA band combination checking under below conditions should against RF capability or AS capability.<BR>1. LTE CA band combination configured by network.<BR>2. ENDC band combination LTE CA standalone part.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,The setting of this SBP could be set to "Enabled" by defining compile option __CHECKING_CA_WITH_RF_CAP__ in the makefile,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+10868,60425,NVRAM_EF_EL1_AMPRADJTBL_LID,1,amprData,ampr_by_band[0~34].amprData,Not Support,no,no,no,no,"[MCF] AMPR value, unit is 1/256 dB",UNION,48,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10869,60425,NVRAM_EF_EL1_AMPRADJTBL_LID,1,amprIdx,ampr_by_band[0~34].amprIdx,OTA,no,no,no,no,[MCF] NS index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10870,60425,NVRAM_EF_EL1_AMPRADJTBL_LID,1,bandIdx,ampr_by_band[0~34].bandIdx,OTA,no,no,no,no,[MCF] Band index,ENUM,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_CHANGE_RAT_FOR_CUSTOM_IMSI,modem_sbp_config[133].SBP_CHANGE_RAT_FOR_CUSTOM_IMSI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Update RAT mode based on MCC and IMSI<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_RAT_MODE_SETTING_FOR_DOCOMO,modem_sbp_config[133].SBP_RAT_MODE_SETTING_FOR_DOCOMO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Customize RAT mode setting for DOCOMO operator.<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10874,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_RAT_MODE_SETTING_FOR_KDDI,modem_sbp_config[132].SBP_RAT_MODE_SETTING_FOR_KDDI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Customize RAT mode setting for KDDI operator.<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Check CA with RF capability<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-10878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip CA Enablist customization<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+10871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_CHANGE_RAT_FOR_CUSTOM_IMSI,modem_sbp_config[133].SBP_CHANGE_RAT_FOR_CUSTOM_IMSI,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+10872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_RAT_MODE_SETTING_FOR_DOCOMO,modem_sbp_config[133].SBP_RAT_MODE_SETTING_FOR_DOCOMO,OTA and OTA BY OP,no,no,no,yes,This SBP Feature when enabled will ensure that RAT mode settings are customized according to DOCOMO Operator.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10874,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[132].SBP_RAT_MODE_SETTING_FOR_KDDI,modem_sbp_config[132].SBP_RAT_MODE_SETTING_FOR_KDDI,OTA and OTA BY OP,no,no,no,yes,This SBP Feature when enabled will ensure that RAT mode settings are customized according to KDDI Operator.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10876,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,modem_sbp_config[133].SBP_CHECKING_CA_WITH_RF_CAP,OTA and OTA BY OP,no,no,no,yes,This SBP switch is used to control LTE CA band combination checking under below conditions should against RF capability or AS capability.<BR>1. LTE CA band combination configured by network.<BR>2. ENDC band combination LTE CA standalone part.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,The setting of this SBP could be set to "Enabled" by defining compile option __CHECKING_CA_WITH_RF_CAP__ in the makefile,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+10878,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,modem_sbp_config[133].SBP_SKIP_CA_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"When requestedFrequencyBands is set in UECapabilityEnquiry from network, skip CA Enablist customization if SBP is on.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,The setting of this SBP could be set to "Enabled" by defining compile option __SKIP_CA_CUSTOMIZATION__ in the makefile,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
10898,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,1,timer_length_delay_resume_ads_for_service_recover_from_23g,profile_emerg.general_setting_emerg.timer_length_delay_resume_ads_for_service_recover_from_23g,OTA BY OP,no,no,no,yes,To wait for service recover from 23g before resuming ADS,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0-255,,,,MD Config,Modem - Customer Requirement,,,Use MCF set the Value and check if the value is set correctly in NVRAM,Untested,,,,
10899,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,1,timer_length_delay_resume_ads_for_service_recover_from_23g,profile_normal.general_setting_normal.timer_length_delay_resume_ads_for_service_recover_from_23g,OTA BY OP,no,no,no,yes,To wait for service recover from 23g before resuming ADS,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0-255,,,,MD Config,Modem - Customer Requirement,,,Use MCF set the Value and check if the value is set correctly in NVRAM,Untested,,,,
-10900,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_RETRY_FPLMN_ONE_ROUND,modem_sbp_config[133].SBP_RETRY_FPLMN_ONE_ROUND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Allow to retry FPLMNs<BR>bit 0:0:Not Enabled: Default behavior<BR>bit 1:1:Enabled: UE store FPLMNs and search them after timer expires",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (6 minutes)<BR>[Init] Set SBP to ON<BR>[Test Step] 1. PLMN rejected #11. 2. Wait for 5 minutes. 3. Observe whether the UE retry the FPLMN<BR>[Expected Result] UE Retry FPLMN,Pass,,,,
+10900,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_RETRY_FPLMN_ONE_ROUND,modem_sbp_config[133].SBP_RETRY_FPLMN_ONE_ROUND,OTA and OTA BY OP,no,no,no,yes,"When UE receives reject cause #11, This SBP will start timer RETRY_FPLMN_TIMER and store FPLMNs in RETRY_FPLMN_LIST list.<BR>After the timer expires, UE will regard stored FPLMNs as searching candidate.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,"If compile option __RETRY_FPLMN_ONE_ROUND__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (6 minutes)<BR>[Init] Set SBP to ON<BR>[Test Step] 1. PLMN rejected #11. 2. Wait for 5 minutes. 3. Observe whether the UE retry the FPLMN<BR>[Expected Result] UE Retry FPLMN,Pass,,,,
10901,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_sms_disconnect_stack,ua_config.dereg_sms_disconnect_stack,OTA and OTA BY OP,no,no,no,no,If to trigger to disconnect to stack or not when receives SIPTX_REG_DEREG. And the legacy design is 1.<BR>1: DO disconnect to stack when receives SIPTX_REG_DEREG;<BR>0: NOT disconnect to stack when receives SIPTX_REG_DEREG;<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:DO disconnect to stack when receives SIPTX_REG_DEREG<BR>0:NOT disconnect to stack when receives SIPTX_REG_DEREG,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
10902,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_sms_disconnect_stack.dereg_sms_disconnect_stack,ua_config.dereg_sms_disconnect_stack.dereg_sms_disconnect_stack,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>If to trigger to disconnect to stack or not when receives SIPTX_REG_DEREG. And the legacy design is 1.<BR>bit 1:1:DO disconnect to stack when receives SIPTX_REG_DEREG;<BR>bit 0:0:NOT disconnect to stack when receives SIPTX_REG_DEREG;,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:0:NOT disconnect to stack when receives SIPTX_REG_DEREG;<BR>0x01:1:DO disconnect to stack when receives SIPTX_REG_DEREG;,,,,IMS,IMS,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
10904,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",timer_length_delay_resume_ads_for_service_recover_from_23g,profile_emerg.general_setting_emerg.timer_length_delay_resume_ads_for_service_recover_from_23g,OTA BY OP,no,no,no,yes,To wait for service recover from 23g before resuming ADS,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255:To wait for service recover from 23g before resuming ADS,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step]<BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Untested,,,,
10905,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",timer_length_delay_resume_ads_for_service_recover_from_23g,profile_normal.general_setting_normal.timer_length_delay_resume_ads_for_service_recover_from_23g,OTA BY OP,no,no,no,yes,To wait for service recover from 23g before resuming ADS,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255:To wait for service recover from 23g before resuming ADS,,,,MD Config,Modem - Customer Requirement,,,Test in machine N<BR>Test Time (minutes): 5<BR>[Init] N<BR>[Test Step]<BR>1. Modify the MCF value and power on<BR>2. dial normal call<BR>[Expected Result] UE can dial call normally. Provide the pass log to RD to check,Untested,,,,
-10911,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_3G_FAST_PLMN_LIST_INFO,modem_sbp_config[133].SBP_3G_FAST_PLMN_LIST_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>RRC shall not perform fast 3G plmn list info<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10913,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_ONE_BUTTON_CALL_REJECT,modem_sbp_config[133].SBP_ONE_BUTTON_CALL_REJECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Converting functionality of AT+CHLD=11 to AT+CHLD=8 for incoming calls<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-10917,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_SET_CSMO_BIT_IN_CM_SERVICE_WHEN_LAI_CHANGED_DURING_CSFB,modem_sbp_config[133].SBP_SET_CSMO_BIT_IN_CM_SERVICE_WHEN_LAI_CHANGED_DURING_CSFB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Don't set CSMO bit CM service request after CSMO bit set in LAU<BR>bit 0:0:not enabled<BR>bit 1:1:enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00:MM will not set CSMO bit in CM_SERVICE_REQUEST message, since MM has already set CSMO bit in LAU request when LAI has been changed after CSFB<BR>0x01:MM will set CSMO bit in CM_SERVICE_REQUEST message also, even MM has already set CSMO bit in LAU request when LAI has been changed after CSFB",,,To enable compilation option __SET_CSMO_BIT_IN_CM_SERVICE_WHEN_LAI_CHANGED_DURING_CSFB__is required,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 30 mins <BR>[Init] DUT boot up <BR>[Test Step->Active RAT LTE<BR>(1) Power on.<BR>(2) Impose Access Class restriction as following to LTE cell.<BR>- ac-Barring Info (SIB2)<BR> ssac-Barring For MMTEL-Voice<BR> ac-Barring Factor = 0<BR>(3) Does not impose Access Class restriction to WCDMA cell.<BR>(4) Perform MO call operation.,Pass,,,,
-10919,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_PHYSICAL_DEDICATED_CONFIGURATION_INFO,modem_sbp_config[134].SBP_PHYSICAL_DEDICATED_CONFIGURATION_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable / disable physical dedicated configureation information reporting URC.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+10911,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_3G_FAST_PLMN_LIST_INFO,modem_sbp_config[133].SBP_3G_FAST_PLMN_LIST_INFO,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+10913,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_ONE_BUTTON_CALL_REJECT,modem_sbp_config[133].SBP_ONE_BUTTON_CALL_REJECT,OTA and OTA BY OP,no,no,no,yes,If this feature is enabled then convert functionality of AT+CHLD=11 to AT+CHLD=8 for incoming calls,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+10917,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[133].SBP_SET_CSMO_BIT_IN_CM_SERVICE_WHEN_LAI_CHANGED_DURING_CSFB,modem_sbp_config[133].SBP_SET_CSMO_BIT_IN_CM_SERVICE_WHEN_LAI_CHANGED_DURING_CSFB,OTA and OTA BY OP,no,no,no,yes,"if SBP is enabled, then MM will set CSMO bit in CM_SERVICE_REQUEST message also, even MM has already set CSMO bit in LAU request when LAI has been changed after CSFB.<BR>if SBP is disabled, then MM will not set CSMO bit in CM_SERVICE_REQUEST message, since MM has already set CSMO bit in LAU request when LAI has been changed after CSFB.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00:MM will not set CSMO bit in CM_SERVICE_REQUEST message, since MM has already set CSMO bit in LAU request when LAI has been changed after CSFB<BR>0x01:MM will set CSMO bit in CM_SERVICE_REQUEST message also, even MM has already set CSMO bit in LAU request when LAI has been changed after CSFB",,,This SBP can be controlled by compiler option __SET_CSMO_BIT_IN_CM_SERVICE_WHEN_LAI_CHANGED_DURING_CSFB__,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) :Y<BR>Test Time (minutes) : 30 mins <BR>[Init] DUT boot up <BR>[Test Step->Active RAT LTE<BR>(1) Power on.<BR>(2) Impose Access Class restriction as following to LTE cell.<BR>- ac-Barring Info (SIB2)<BR> ssac-Barring For MMTEL-Voice<BR> ac-Barring Factor = 0<BR>(3) Does not impose Access Class restriction to WCDMA cell.<BR>(4) Perform MO call operation.,Pass,,,,
+10919,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_PHYSICAL_DEDICATED_CONFIGURATION_INFO,modem_sbp_config[134].SBP_PHYSICAL_DEDICATED_CONFIGURATION_INFO,OTA and OTA BY OP,no,no,no,yes,"To enable physical dedicated configureation information report, which contain 4x4MIMO / 256QAM.<BR>If this SBP is turn ON, UE will report the information by URC.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
10939,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",serv_non_endc_nbr_endc_rsrp_thresh,serv_non_endc_nbr_endc_rsrp_thresh,OTA and OTA BY OP,no,no,no,no,[MCF]Customized serving RSRP threshold for low to high priority reselection(non endc to non endc cell). (qdBm),SHORT,2,,,"0x48, 0xfe,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10940,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",serv_non_endc_nbr_endc_rsrq_thresh,serv_non_endc_nbr_endc_rsrq_thresh,OTA and OTA BY OP,no,no,no,no,[MCF]Customized serving RSRQ threshold for low to high priority reselection(non endc to non endc cell). (qdB),SHORT,2,,,"0xbc, 0xff,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10941,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_UE_REGISTRATION_STATUS_REG_IN_MRU_4G5,modem_sbp_config[134].SBP_UE_REGISTRATION_STATUS_REG_IN_MRU_4G5,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Indicated UE status in 5GMM Mobility Updates.<BR>bit 0:0:Not Registered<BR>bit 1:1:Registered",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:UE reports itself as 5GMM DEREGISTERED upon system change from 4G to 5G<BR>0x01:UE reports itself as 5GMM REGISTERED upon system change from 4G to 5G,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10941,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_UE_REGISTRATION_STATUS_REG_IN_MRU_4G5,modem_sbp_config[134].SBP_UE_REGISTRATION_STATUS_REG_IN_MRU_4G5,OTA and OTA BY OP,no,no,no,yes,"5GMM UE status IE has separate fields for 4G registration status and for 5G registration<BR>status. The setting of 4G registration has been well enough specified in TS 24.501, but<BR>the 5G registration has been left without any statement for single registration UEs<BR>performing inter system change from 4G to 5G.<BR>Gen 97 default setting has been to indicate the 5G registration status as registered.<BR>This configuration item allows changing the status as required.<BR>NOTE: Rel 16 specification has been changed to network side to ignore the status.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:UE reports itself as 5GMM DEREGISTERED upon system change from 4G to 5G<BR>0x01:UE reports itself as 5GMM REGISTERED upon system change from 4G to 5G,,,,MD Config,Modem - Customer Requirement,,,,Pass,,,,
10942,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_evoltesi_ringing_timer_timeout,ua_config.call_evoltesi_ringing_timer_timeout,OTA and OTA BY OP,no,no,no,no,"When dsda_like feature enabled, if timer expiry, modem will do related actions according to the AT+EVOLTESI configuration<BR>0:Disable<BR>Unit:sec<BR>",UNSIGNED CHAR,1,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~4:0:Disable<BR>1:Reject call after evoltsi_ringing_timer timeout, then sync TAU<BR>2:Reject call after evoltsi_ringing_timer timeout, no sync TAU<BR>3:Resume call and resume keep alive mode after evoltesi_ringing_timer timeout<BR>4:Reject call directlywhen just have received INVITE (+EAIC will be sent to AP)",,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
10946,2196,NVRAM_EF_D2_MCF_MTU_CFG_LID,1,is_apn_valid,is_apn_valid,OTA BY OP,no,no,no,no,"[MCF] Whether this config need by apn<BR>[Note] If you only want to modify some APNs' MTU size in an operator, you need to set it to true.",ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"[Test in machine]<BR>Yes<BR>[Test time]<BR>3 Minutes<BR>[Init.]<BR>Prepare an internal phone, SIM card<BR>[Test Step]<BR>1. Boot up phone<BR>2. Insert SIM card<BR>[Expected Result]<BR>1. The phone can attach to network successfully<BR>2. Use MCF dump and check whether dumped value is the same as the configured one by MCF tool.",Untested,,,,
10947,2196,NVRAM_EF_D2_MCF_MTU_CFG_LID,1,is_mcf_first,is_mcf_first,OTA BY OP,no,no,no,no,[MCF] Is MCF config or network value preferred,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"[Test in machine]<BR>Yes<BR>[Test time]<BR>3 Minutes<BR>[Init.]<BR>Prepare an internal phone, SIM card<BR>[Test Step]<BR>1. Boot up phone<BR>2. Insert SIM card<BR>[Expected Result]<BR>1. The phone can attach to network successfully<BR>2. Use MCF dump and check whether dumped value is the same as the configured one by MCF tool.",Untested,,,,
10948,2196,NVRAM_EF_D2_MCF_MTU_CFG_LID,1,is_valid,is_valid,OTA BY OP,no,no,no,no,[MCF] Whether this MCF config is valid or not,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"[Test in machine]<BR>Yes<BR>[Test time]<BR>3 Minutes<BR>[Init.]<BR>Prepare an internal phone, SIM card<BR>[Test Step]<BR>1. Boot up phone<BR>2. Insert SIM card<BR>[Expected Result]<BR>1. The phone can attach to network successfully<BR>2. Use MCF dump and check whether dumped value is the same as the configured one by MCF tool.",Untested,,,,
-10952,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[103].SBP_RTT_T57M,modem_sbp_data_config[103].SBP_RTT_T57M,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>1xRTT power-up/Initialization timer(in second)",BIT,8,,8,0x14,NR15.R3.MD700.IVT.MP1MR3.MP,,short: 0x00 ~0x1d,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes):1 mins<BR>[Init]<BR>modify modem_sbp_data_config[103].SBP_RTT_T57M to 5<BR>[Test Step]<BR>1. Insert CT card, disable VoLTE<BR>2. power on the phone<BR>3. 10 seconds later, make MT call<BR>[Expected Result]<BR>MT call success<BR>[More]",Untested,,,,
-10953,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_DISABLE_DOWNGRADE_UE_CATEGORY,modem_sbp_config[134].SBP_DISABLE_DOWNGRADE_UE_CATEGORY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable downgrade UE category when CA band combination is not supported<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-10955,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_EPCELLINFO_URC,modem_sbp_config[134].SBP_EPCELLINFO_URC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable EPCELLINFO URC to report band<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-10956,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_SUPPORT_SEARCH_RECORD,modem_sbp_config[134].SBP_SUPPORT_SEARCH_RECORD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Configure if the APDU instruction byte A2 support or not<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10952,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[103].SBP_RTT_T57M,modem_sbp_data_config[103].SBP_RTT_T57M,OTA and OTA BY OP,no,no,no,yes,"This provides the value for 1xRTT power-up/Initialization timer which is enable after power up.When the timer is active, 1xRTT can not make any register.<BR>We provide this SBP to customize T57m,and the default value is 20seconds as C.S0005 defined.",BIT,8,,8,0x14,NR15.R3.MD700.IVT.MP1MR3.MP,,short: 0x00 ~0x1d,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes):1 mins<BR>[Init]<BR>modify modem_sbp_data_config[103].SBP_RTT_T57M to 5<BR>[Test Step]<BR>1. Insert CT card, disable VoLTE<BR>2. power on the phone<BR>3. 10 seconds later, make MT call<BR>[Expected Result]<BR>MT call success<BR>[More]",Untested,,,,
+10953,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_DISABLE_DOWNGRADE_UE_CATEGORY,modem_sbp_config[134].SBP_DISABLE_DOWNGRADE_UE_CATEGORY,OTA and OTA BY OP,no,no,no,yes,This feature is used to disable UE category downgrade when max DL and UL scell number equal to zero.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,The setting of this SBP could be set to "Enabled" by defining compile option __DISABLE_DOWNGRADE_UE_CATEGORY__ in the makefile,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+10955,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_EPCELLINFO_URC,modem_sbp_config[134].SBP_EPCELLINFO_URC,OTA and OTA BY OP,no,no,no,yes,"If enabled, L4C reports +EPCELLINFO: &band& info to AP",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+10956,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_SUPPORT_SEARCH_RECORD,modem_sbp_config[134].SBP_SUPPORT_SEARCH_RECORD,OTA and OTA BY OP,no,no,no,yes,Configure if the APDU instruction byte A2 support or not.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
10958,2889,NVRAM_EF_L5_CC_ECC_LIST_OP01_LID,"1,2",cat,ecc[0~31].cat,OTA,no,no,no,no,"[MCF]category, bitmapped",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255,,,,MD Config,Modem - Customer Requirement,,,update OTA file and then power on to check ecc list,Pass,,,,
10959,2889,NVRAM_EF_L5_CC_ECC_LIST_OP01_LID,"1,2",condition,ecc[0~31].condition,OTA,no,no,no,no,[MCF]condition for ecc numbers,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,{0-2},,,,MD Config,Modem - Customer Requirement,,,update OTA file and then power on to check ecc list,Pass,,,,
10960,2889,NVRAM_EF_L5_CC_ECC_LIST_OP01_LID,"1,2",condition.condition,ecc[0~31].condition.condition,OTA,no,no,no,no,"[MCF]condition for ecc numbers<BR><BR>bit 0:0:ecc only for no sim<BR>bit 1:1:ecc always<BR>bit 2:2:for fake ui, normal call but ui show ecc<BR>",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~2},,,,MD Config,Modem - Customer Requirement,,,update OTA file and then power on to check ecc list,Pass,,,,
@@ -9679,49 +9679,49 @@
10998,1541,NVRAM_EF_EMM_REJECT_CAUSE_MAPPING_LID,"1,2",preliminary_ftai_max_interval_time,preliminary_ftai_max_interval_time,OTA,no,no,no,no,[MCF] Max interval timer for preliminary FTAI list,UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
11009,1152,NVRAM_EF_NWSEL_DATA_LID,"1,2",num_of_prefer_rat,num_of_prefer_rat,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]Total number of preferred RATs, max number is 4",UNSIGNED INT,4,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~4:valid range,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (3 minutes)<BR>[Init] None<BR>[Test Step] 1. Set RAT mode as 2/3/4/5G. 2. Query the preferred RAT list by AT+EPRATL?. 3. Reboot UE. 4. Query the preferred RAT list by AT+EPRATL?.<BR>[Expected Result] The preferred RAT list remains unchanged after UE reboot,Pass,,,,
11010,1152,NVRAM_EF_NWSEL_DATA_LID,"1,2",prefer_rat,prefer_rat,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]Preferred RAT list",ENUM,4,4,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"array: {0/1/2/4/128, 0/1/2/4/128, 0/1/2/4/128, 0/1/2/4/128}:preferred RAT list",,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y)<BR>Test Time (3 minutes)<BR>[Init] None<BR>[Test Step] 1. Set RAT mode as 2/3/4/5G. 2. Query the preferred RAT list by AT+EPRATL?. 3. Reboot UE. 4. Query the preferred RAT list by AT+EPRATL?.<BR>[Expected Result] The preferred RAT list remains unchanged after UE reboot,Pass,,,,
-11019,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_GAS_ENABLE_INVALID_PLMN_SEARCH_BAR_CELL_WITH_C1_NOK,modem_sbp_config[134].SBP_GAS_ENABLE_INVALID_PLMN_SEARCH_BAR_CELL_WITH_C1_NOK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not send PLMN_FOUND_IND to RATCM when SEARCH is full band search on FFFFFF and C1 is calculated as C1 < 0<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0 and 1<BR>:0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] Perform the test in weak signal area<BR>[Test Step]<BR>Configure a PLMN/arfcn whose signal is weak, and trigger normal PLMN search on target PLMN FFFFFF to get the available PLMNs. <BR>[Expected Result] <BR>UE should not send PLMN_FOUND_IND when UE finds a GSM cell whose C1 < 0.",Pass,,,,
-11020,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_3G_PREFER_REDIRECTED_FREQ_DURING_RESELECTION_EVALUATION,modem_sbp_config[136].SBP_3G_PREFER_REDIRECTED_FREQ_DURING_RESELECTION_EVALUATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>SBP to rank the redirected frequency higher<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11021,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_AFR_2G4_DISABLED,modem_sbp_config[137].SBP_AFR_2G4_DISABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>AFR from 2G to 4G will use this setting to check whether Enabled or Disabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11022,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_AFR_3G4_DISABLED,modem_sbp_config[137].SBP_AFR_3G4_DISABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>AFR from 3G to 4G will use this setting to check whether Enabled or Disabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11023,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_DISABLE_RAC_IMS_REG_GUARD_TIMER,modem_sbp_config[134].SBP_DISABLE_RAC_IMS_REG_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable RAC IMS_REG_GUARD_TIMER<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1<BR>0,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-11024,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_DISABLE_TAU_FOR_PLMNLIST,modem_sbp_config[135].SBP_DISABLE_TAU_FOR_PLMNLIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Don't perform sync TAU during PLMN list ongoing<BR>bit 0:0:Perform TAU<BR>bit 1:1:Not perform TAU",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Don't perform sync TAU during PLMN list ongoing<BR>0:Perform sync TAU during PLMN list ongoing,,,,LTE Protocol (R13 Baseline),4G,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-11025,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_DONT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_ABNORMAL,modem_sbp_config[136].SBP_DONT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not reset T3402 to default value at 5 times Attach abnormal.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11026,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_EMM_CONN_FAIL_ABNORMAL_B_EMC,modem_sbp_config[137].SBP_EMM_CONN_FAIL_ABNORMAL_B_EMC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Handle abnormal case b for EMC as per 5.5.1.2.6, 5.5.3.2.6.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11027,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_ENABLE_EDGE_ICON_CUSTOMIZATION,modem_sbp_config[135].SBP_ENABLE_EDGE_ICON_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable reporting EDGE cell capability even though PS is detached or not requested<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11028,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_GAS_SKIP_INTERFERENCE_FREQ_FOR_CELL_SEL,modem_sbp_config[136].SBP_GAS_SKIP_INTERFERENCE_FREQ_FOR_CELL_SEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip the frequencies which are having interference with other RAT frequencies<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR> Test Time (minutes) : NA<BR> [Init] : <BR> [Test Step] : <BR>1. Send AT command AT+ESBP=5,"SBP_GAS_SKIP_INTERFERENCE_FREQ_FOR_CELL_SEL",1<BR>2. UE will camp to 4g in 4g-2g mode, <BR>3. then trigger AT+COPS=1,2,"40445", 0 <BR>4. Make MO call, disconnect, <BR><BR><BR> [Expected Result] : UE should not select the 2G frequencies which are having interference with other higher RAT",Pass,,,,
-11029,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_HSPA_TO_LTE_FAST_RESEL,modem_sbp_config[137].SBP_HSPA_TO_LTE_FAST_RESEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Fast reselction to LTE<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11030,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_IS_GSM_TRESELECTION_OFFSET_VALID,modem_sbp_config[135].SBP_IS_GSM_TRESELECTION_OFFSET_VALID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Apply offset on Treselection timer for GSM Cells<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11031,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_FEATURE_DISABLE,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_FEATURE_DISABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable LTE advanced icon feature<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11032,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_USE_OPTION_A,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_USE_OPTION_A,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use Option-A, as a criteria to send LTE advanced icon status to AP<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11033,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_LTE_FILTER_WEAK_SUBBAND,modem_sbp_config[137].SBP_LTE_FILTER_WEAK_SUBBAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore sub bands with Weak RSSI<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"bit :0<BR>bit :1:bit :0:Disabled , <BR>bit :1:Enabled",,,,MD Config,Modem - Customer Requirement,,,LTE Cell Search.,Untested,,,,
-11034,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_PLMN_LIST_ONGOING_REJECT_ULDATA_TRANSFER,modem_sbp_config[135].SBP_PLMN_LIST_ONGOING_REJECT_ULDATA_TRANSFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>ULDATA can be transferred during PLMN list ongoing<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0 : disabled<BR>1 : enabled,,,,D-SBP,SBP,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-11035,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_REDUCE_MODEM_EM_REPORT,modem_sbp_config[137].SBP_REDUCE_MODEM_EM_REPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reduce Modem EM Report Rate<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,(RJIL) Data Collector,OP Requirement,,,Check if EM update is expected according to the SBP setting,Pass,,,,
-11036,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_REMOVE_CELL_UPD_R10_SECURITY_REVERT_STATUS_IND,modem_sbp_config[135].SBP_REMOVE_CELL_UPD_R10_SECURITY_REVERT_STATUS_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Remove CU R10 IE: securityRevertStatusIndicator<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11037,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_SIM_HOT_PLUG_IN_NO_INIT,modem_sbp_config[136].SBP_SIM_HOT_PLUG_IN_NO_INIT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE does not perform SIM initialization on plug in<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,Feature is dependent upon __TC10__ compilation switch,MD Config,Modem - Customer Requirement,,,"Pre-Condition:<BR>This SBP is applicable only for TC10 Projects<BR><BR>[Init]<BR>Enable SBP<BR><BR>[Test Step]<BR>Hot Plug in SIM card<BR><BR>[Expected Result]<BR>UE should not register to NW, it should only display that card is inserted",Untested,,,,
-11038,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_SKIP_NULL_INTEGRITY_PROTECTION_CHECK,modem_sbp_config[136].SBP_SKIP_NULL_INTEGRITY_PROTECTION_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NULL Integrity Protection will be skipped<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,(VzW) E911,OP Requirement,,,,Untested,,,,
-11039,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_STKSMS_NO_PDU_CHK,modem_sbp_config[135].SBP_STKSMS_NO_PDU_CHK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>No PDU check for the STK SMS over IMS<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+11019,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_GAS_ENABLE_INVALID_PLMN_SEARCH_BAR_CELL_WITH_C1_NOK,modem_sbp_config[134].SBP_GAS_ENABLE_INVALID_PLMN_SEARCH_BAR_CELL_WITH_C1_NOK,OTA and OTA BY OP,no,no,no,yes,"During full band PLMN_SEARCH on INVALID_PLMN(ffffff), if SI3 reported PLMN/cell C1 is not OK i.e., C1 < 0 then arfcn_type shall be set as RCS_BARRED_CELL. As a result PLMN_FOUND_IND shall not be reported to RATCM.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0 and 1<BR>:0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 10<BR>[Init] Perform the test in weak signal area<BR>[Test Step]<BR>Configure a PLMN/arfcn whose signal is weak, and trigger normal PLMN search on target PLMN FFFFFF to get the available PLMNs. <BR>[Expected Result] <BR>UE should not send PLMN_FOUND_IND when UE finds a GSM cell whose C1 < 0.",Pass,,,,
+11020,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_3G_PREFER_REDIRECTED_FREQ_DURING_RESELECTION_EVALUATION,modem_sbp_config[136].SBP_3G_PREFER_REDIRECTED_FREQ_DURING_RESELECTION_EVALUATION,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled CSCE will always rank Redirected frequency as Higher.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP can be controlled by compile option __3G_PREFER_REDIRECTED_FREQ_DURING_RESELECTION_EVALUATION__,,,,,,Untested,,,,
+11021,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_AFR_2G4_DISABLED,modem_sbp_config[137].SBP_AFR_2G4_DISABLED,OTA and OTA BY OP,no,no,no,yes,SBP to control AFR from 2G to 4G,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11022,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_AFR_3G4_DISABLED,modem_sbp_config[137].SBP_AFR_3G4_DISABLED,OTA and OTA BY OP,no,no,no,yes,SBP to control AFR from 3G to 4G,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11023,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_DISABLE_RAC_IMS_REG_GUARD_TIMER,modem_sbp_config[134].SBP_DISABLE_RAC_IMS_REG_GUARD_TIMER,OTA and OTA BY OP,no,no,no,yes,This SBP is to control enable/disable of RAC IMS_REG_GUARD_TIMER.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1<BR>0,,,This SBP can be controlled by compile option __DISABLE_RAC_IMS_REG_GUARD_TIMER__,MD Config,Modem - Customer Requirement,,,,Pass,,,,
+11024,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_DISABLE_TAU_FOR_PLMNLIST,modem_sbp_config[135].SBP_DISABLE_TAU_FOR_PLMNLIST,OTA and OTA BY OP,no,no,no,yes,"In SBP_PLMNLIST_IN_CONNECTED_MODE, a TAU will be performed to sync with network after connection<BR>local release for PLMN List acceleration. Since after this TAU, network may still keep connection.<BR>This could degrade PLMN List performance. To accelerate PLMN List more, one may enable this SBP<BR>to disable TAU for this case. The trade-off for not perform this TAU is MT call/paging may be<BR>missed due connection status unsync with network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Don't perform sync TAU during PLMN list ongoing<BR>0:Perform sync TAU during PLMN list ongoing,,,This feature can be enabled by __SBP_DISABLE_TAU_FOR_PLMNLIST__ flag,LTE Protocol (R13 Baseline),4G,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+11025,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_DONT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_ABNORMAL,modem_sbp_config[136].SBP_DONT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_ABNORMAL,OTA and OTA BY OP,no,no,no,yes,"When attach abnormal happens 5 times, T3402 is reset to default value in legacy under SBP_DISABLE_T3402_OPTIMIZATION. With this SBP <BR>SBP_DONT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_ABNORMAL enabled, Do not reset T3402 to default value at 5 times Attach abnormal.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __ENABLE_DONT_RESET_T3402_VALUE_AFTER_FIVE_ATTEMPT_TO_ATTACH_ABNORMAL__ is defined, the SBP is enabled.",,,,,,Untested,,,,
+11026,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_EMM_CONN_FAIL_ABNORMAL_B_EMC,modem_sbp_config[137].SBP_EMM_CONN_FAIL_ABNORMAL_B_EMC,OTA and OTA BY OP,no,no,no,yes,"As per TS24.301 abnormal case b for EMC as per 5.5.1.2.6, 5.5.3.2.6, when lower layer failure happens for EST_REQ<BR>then inform upper layers of the failure of the procedure.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"If compile option __ENABLE_EMM_CONN_FAIL_ABNORMAL_B_EMC__ is defined, the SBP is enabled.",,,,,,Untested,,,,
+11027,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_ENABLE_EDGE_ICON_CUSTOMIZATION,modem_sbp_config[135].SBP_ENABLE_EDGE_ICON_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,Report EDGE cell capability even though PS is detached or not requested if SBP is enabled,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature can be enabled by __ENABLE_EDGE_ICON_CUSTOMIZATION__ flag,,,,,,Untested,,,,
+11028,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_GAS_SKIP_INTERFERENCE_FREQ_FOR_CELL_SEL,modem_sbp_config[136].SBP_GAS_SKIP_INTERFERENCE_FREQ_FOR_CELL_SEL,OTA and OTA BY OP,no,no,no,yes,"During CELL selection, Skip the frequencies which are having interference with other RAT frequencies",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR> Test Time (minutes) : NA<BR> [Init] : <BR> [Test Step] : <BR>1. Send AT command AT+ESBP=5,"SBP_GAS_SKIP_INTERFERENCE_FREQ_FOR_CELL_SEL",1<BR>2. UE will camp to 4g in 4g-2g mode, <BR>3. then trigger AT+COPS=1,2,"40445", 0 <BR>4. Make MO call, disconnect, <BR><BR><BR> [Expected Result] : UE should not select the 2G frequencies which are having interference with other higher RAT",Pass,,,,
+11029,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_HSPA_TO_LTE_FAST_RESEL,modem_sbp_config[137].SBP_HSPA_TO_LTE_FAST_RESEL,OTA and OTA BY OP,no,no,no,yes,Use LTE DRX cycle for LTE measurements,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11030,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_IS_GSM_TRESELECTION_OFFSET_VALID,modem_sbp_config[135].SBP_IS_GSM_TRESELECTION_OFFSET_VALID,OTA and OTA BY OP,no,no,no,yes,Apply Offset on NW provided Treselection timer for during 3G-2G reselection,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11031,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_FEATURE_DISABLE,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_FEATURE_DISABLE,OTA and OTA BY OP,no,no,no,yes,Disable LTE advanced icon feature,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11032,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_USE_OPTION_A,modem_sbp_config[135].SBP_LTE_ADVANCED_ICON_USE_OPTION_A,OTA and OTA BY OP,no,no,no,yes,"Option-A: If Device and NW supports one of the LTE advanced features and device is in connected state, icon indication should be sent",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11033,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_LTE_FILTER_WEAK_SUBBAND,modem_sbp_config[137].SBP_LTE_FILTER_WEAK_SUBBAND,OTA and OTA BY OP,no,no,no,yes,"When perfoming band search, to shorten the search time, UE could ignore subbands with weak RSSI value<BR>by configuring this SBP value.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"bit :0<BR>bit :1:bit :0:Disabled , <BR>bit :1:Enabled",,,"if compile option __LTE_FILTER_WEAK_SUBBAND__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,LTE Cell Search.,Pass,,,,
+11034,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_PLMN_LIST_ONGOING_REJECT_ULDATA_TRANSFER,modem_sbp_config[135].SBP_PLMN_LIST_ONGOING_REJECT_ULDATA_TRANSFER,OTA and OTA BY OP,no,no,no,yes,"While PLMN list is ongoing, PLMN list would be suspended if there're UL IMS data going to be transfer. PLMN list would be resumed after data transfer is finished. The transfer of UL IMS data will cause PLMN list take longer time to be accomplished.<BR>If this SBP is enabled, UE will not handle IMS uplink data when plmn-list is ongoing.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0 : disabled<BR>1 : enabled,,,This feature can be enabled by __SBP_PLMN_LIST_ONGOING_REJECT_ULDATA_TRANSFER__ flag,D-SBP,SBP,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+11035,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_REDUCE_MODEM_EM_REPORT,modem_sbp_config[137].SBP_REDUCE_MODEM_EM_REPORT,OTA and OTA BY OP,no,no,no,yes,"This feature is used to reduce the report rate some frequently reported modem EM message (MSG_ID_EM_ERRC_MOB_MEAS_INTRARAT_INFO_IND, MSG_ID_EM_EL1_STATUS_IND, MSG_ID_EM_LTE_RRC_STATE_IND) to improve the UE power consumption.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,User could use compile option __REDUCE_MD_EM_REPORT__ to switch the default setting of this SBP.,(RJIL) Data Collector,OP Requirement,,,Check if EM update is expected according to the SBP setting,Pass,,,,
+11036,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_REMOVE_CELL_UPD_R10_SECURITY_REVERT_STATUS_IND,modem_sbp_config[135].SBP_REMOVE_CELL_UPD_R10_SECURITY_REVERT_STATUS_IND,OTA and OTA BY OP,no,no,no,yes,Remove CU R10 IE: securityRevertStatusIndicator,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+11037,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_SIM_HOT_PLUG_IN_NO_INIT,modem_sbp_config[136].SBP_SIM_HOT_PLUG_IN_NO_INIT,Not Support,no,no,no,yes,"On SIM hot swap, Do not perform SIM initialization.<BR>Inform user about SIM insertiona/removal event.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,"Pre-Condition:<BR>This SBP is applicable only for TC10 Projects<BR><BR>[Init]<BR>Enable SBP<BR><BR>[Test Step]<BR>Hot Plug in SIM card<BR><BR>[Expected Result]<BR>UE should not register to NW, it should only display that card is inserted",Untested,,,,
+11038,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_SKIP_NULL_INTEGRITY_PROTECTION_CHECK,modem_sbp_config[136].SBP_SKIP_NULL_INTEGRITY_PROTECTION_CHECK,OTA and OTA BY OP,no,no,no,yes,This SBP is to control the check for NULL Integrity Protection,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,(VzW) E911,OP Requirement,,,,Untested,,,,
+11039,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[135].SBP_STKSMS_NO_PDU_CHK,modem_sbp_config[135].SBP_STKSMS_NO_PDU_CHK,OTA and OTA BY OP,no,no,no,yes,No PDU check for the STK SMS over IMS,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
11040,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_TCM_SET_CUSTOM_REQ_23G_QOS_FOR_IMS,modem_sbp_config[136].SBP_TCM_SET_CUSTOM_REQ_23G_QOS_FOR_IMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not set custom QOS values in Requested QoS for an IMS PDN under 23G<BR>bit 0:0:would not set custom QOS values in Requested QoS for an IMS PDN under 23G<BR>bit 1:1:set custom QOS values in Requested QoS for an IMS PDN under 23G",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (1 minutes)<BR>[Init] NA<BR>[Test Step]<BR>1.Enable SBP_TCM_SET_CUSTOM_REQ_23G_QOS_FOR_IMS<BR>2.Set up IMS PDP context;<BR>3.Check log <BR>[Expected Result]<BR>The parameter of "requested qos" in ILM smreg_pdp_activate_req sent from TCM is as expected.,Untested,,,,
-11041,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_TITAN_SKIP_LDU_CHECK,modem_sbp_config[134].SBP_TITAN_SKIP_LDU_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip Titan's LDU check<BR>bit 0:0:Disable: Will check LDU<BR>bit 1:1:Enable: Skip check LDU<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11042,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_UAS_RESET_FREQUENCY_CORRECTION_FOR_CELL_SEL,modem_sbp_config[136].SBP_UAS_RESET_FREQUENCY_CORRECTION_FOR_CELL_SEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reset the Frequency correction when MCC priority search is triggered and Cell selection failed<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11043,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_VZW_SWITCH_REQUIREMENT_VERSION_FOR_SSAC,modem_sbp_config[136].SBP_VZW_SWITCH_REQUIREMENT_VERSION_FOR_SSAC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>SSAC information shall NOT be applied when the RRC state is connected.<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,1.Enable/disable the SBP : SBP_VZW_SWITCH_REQUIREMENT_VERSION_FOR_SSAC <BR>2.Boot up the UE and initiate the IMS MMTEL procedure.<BR>3.Observe the SSAC information sent to AP,Untested,,,,
-11044,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[94].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,modem_sbp_data_config[94].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>backoff time of VGSM to avoid 4G5 MOD collision<BR>bit 0:0:No backoff time<BR>bit 1:1:1 second<BR>bit 2:2:2 seconds<BR>bit 3:3:3 seconds<BR>bit 4:4:4 seconds<BR>bit 5:5:5 seconds",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~5:To control the backoff time (second) to update capability to Network in 4G to 5G with N26 interworking case for avoiding MO/MT PDU session modification collision.,,,NA,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-11045,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[102].SBP_ENDC_EN_AMPR,modem_sbp_data_config[102].SBP_ENDC_EN_AMPR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable ENDC enhanced AMPR table<BR>bit 0:0:Enhanced table disable<BR>bit 1:1:Enhanced table enable",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-11046,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[92].SBP_IDC_GNSSPWR_EN,modem_sbp_data_config[92].SBP_IDC_GNSSPWR_EN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable lte powerback at B13, 14 with Gps on<BR>bit 0:0:IDC GNSSPWR disable<BR>bit 1:1:IDC GNSSPWR enable",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,11047,In-Device Coexistence (IDC),Cross CONSYS,,,Test in machine (Y/N)<BR> Test Time (minutes)<BR> [Init]<BR> [Test Step]<BR> [Expected Result],Untested,,,,
-11047,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[93].SBP_IDC_IM_TX_PWR_FOR_GPS,modem_sbp_data_config[93].SBP_IDC_IM_TX_PWR_FOR_GPS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Set LTE max Tx power when IDC is enabled<BR>bit 1:1:TX_PWR_1<BR>bit 2:2:TX_PWR_2<BR>bit 3:3:TX_PWR_3<BR>bit 4:4:TX_PWR_4<BR>bit 5:5:TX_PWR_5<BR>bit 6:6:TX_PWR_6<BR>bit 7:7:TX_PWR_7<BR>bit 8:8:TX_PWR_8<BR>bit 9:9:TX_PWR_9<BR>bit 10:10:TX_PWR_10<BR>bit 11:11:TX_PWR_11<BR>bit 12:12:TX_PWR_12<BR>bit 13:13:TX_PWR_13<BR>bit 14:14:TX_PWR_14<BR>bit 15:15:TX_PWR_15<BR>bit 16:16:TX_PWR_16<BR>bit 17:17:TX_PWR_17<BR>bit 18:18:TX_PWR_18<BR>bit 19:19:TX_PWR_19<BR>bit 20:20:TX_PWR_20<BR>bit 21:21:TX_PWR_21<BR>bit 22:22:TX_PWR_22<BR>bit 23:23:TX_PWR_23<BR>",BIT,8,,8,0x11,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,11046,In-Device Coexistence (IDC),Cross CONSYS,,,Test in machine (Y/N)<BR> Test Time (minutes)<BR> [Init]<BR> [Test Step]<BR> [Expected Result],Untested,,,,
-11048,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE reject retry counter maximum",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0x01~0x05,,,,MD Config,Modem - Customer Requirement,,,Let UE be rejected by network,Pass,,,,
-11049,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE disable timer unit for LTE reject retry mechanism<BR>bit 1:1:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 1 sec<BR>bit 2:2:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 1 min<BR>bit 3:3:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 6 mins<BR>bit 4:4:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 1 hour<BR>bit 5:5:LTE_REJ_RETRY_DISABLE_TIMER_UNIT 24 hours",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,1~5,,,,,,,,Let UE be rejected by network,Untested,,,,
-11050,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE disable timer value for LTE reject retry mechanism",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11051,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>LTE reject retry mechanism",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0x00~0x03,,,,MD Config,Modem - Customer Requirement,,,Let NW reject UE multiple times with #13/#15.,Pass,,,,
-11052,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[101].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,modem_sbp_data_config[101].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>record life timer unit for LTE reject retry mechanism<BR>bit 1:1:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 1 sec<BR>bit 2:2:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 1 min<BR>bit 3:3:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 6 mins<BR>bit 4:4:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 1 hour<BR>bit 5:5:LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT 24 hours",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0~5,,,,MD Config,Modem - Customer Requirement,,,Let UE reject by network,Pass,,,,
-11053,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>record life timer value for LTE reject retry mechanism",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11054,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[104].SBP_PDCP_DISC_TMR_VOICE_RB,modem_sbp_data_config[104].SBP_PDCP_DISC_TMR_VOICE_RB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Value of PDCP discard timer for voice RB<BR>bit 0:0:10 ms<BR>bit 1:1:20 ms<BR>bit 2:2:30 ms<BR>bit 3:3:40 ms<BR>bit 4:4:50 ms<BR>bit 5:5:60 ms<BR>bit 6:6:75 ms<BR>bit 7:7:100 ms<BR>bit 8:8:150 ms<BR>bit 9:9:200 ms<BR>bit 10:10:250 ms<BR>bit 11:11:300 ms<BR>bit 12:12:500 ms<BR>bit 13:13:750 ms<BR>bit 14:14:1500 ms<BR>bit 15:15:infinity<BR>",BIT,8,,8,0x09,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00: 10ms, 0x01: 20ms, 0x02: 30ms, 0x03: 40ms, 0x04: 50ms, 0x05: 60ms, 0x06: 75ms, 0x07: 100ms, 0x08: 150ms, 0x09: 200ms, 0x0A: 250ms, 0x0B: 300ms, 0x0C: 500ms, 0x0D: 750ms, 0x0E: 1500ms, 0x0F: infinity",,,N/A,MD Config,Modem - Customer Requirement,,,"internet test, volte test",Pass,,,,
-11055,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[105].SBP_RTT_T57M,modem_sbp_data_config[105].SBP_RTT_T57M,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>1xRTT power-up/Initialization timer(in second)",BIT,8,,8,0x14,NR15.R3.MD700.IVT.MP1MR3.MP,,short: 0~20,,,,MD Config,Modem - Customer Requirement,,,"Test in machine :N<BR>Test Time (minutes): 1<BR>[Init]<BR>1. modify modem_sbp_data_config[105].SBP_RTT_T57M as 5<BR>2. insert CT card and disable VoLTE<BR>[Test Step]<BR>1. power on the phone<BR>2. wait 10s, make MT call<BR>[Expected Result]<BR>MT call success",Untested,,,,
-11056,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[95].SBP_TX_PCMAX_OFFSET,modem_sbp_data_config[95].SBP_TX_PCMAX_OFFSET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable PCMAX adjustment in LTE SA and ENDC scenario<BR>bit 0:0:Adjustment disable<BR>bit 1:1:Adjustment enable",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-11057,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[91].SBP_WCDMA_RRC_FEATURE,modem_sbp_data_config[91].SBP_WCDMA_RRC_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable/Disable WCDMA RRC Feature<BR>bit 1:1:RRC FEATURE: FDPCH<BR>bit 2:2:RRC FEATURE: EFDPCH<BR>bit 4:4:RRC FEATURE: CPC<BR>bit 8:8:RRC FEATURE: SLOTFORMAT<BR>bit 16:16:RRC FEATURE: HSFACH<BR>bit 32:32:RRC FEATURE: HSRACH<BR>bit 64:64:RRC FEATURE: HSFACHDRX<BR>bit 128:128:RRC FEATURE: MACIIS",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,SBP_WCDMA_RRC_FEATURE,MD Config,Modem - Customer Requirement,,,Enable/ Disable SBP.<BR>Check RRC connection establishment message content.,Untested,,,,
-11058,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[103].SBP_WCDMA_RRC_FEATURE_EXT,modem_sbp_data_config[103].SBP_WCDMA_RRC_FEATURE_EXT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable/Disable additional WCDMA RRC Feature<BR>bit 1:1:RRC FEATURE: HSSCCHLESS<BR>bit 2:2:RRC FEATURE: INTERRATHO<BR>bit 4:4:RRC FEATURE: MEASREPORT<BR>bit 8:8:RRC FEATURE: TWODRXSCHEMES<BR>bit 16:16:RRC FEATURE: EDPDCHPOWER",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,SBP_WCDMA_RRC_FEATURE,MD Config,Modem - Customer Requirement,,,Enable/ Disable SBP.<BR>Check RRC connection establishment message content.,Untested,,,,
-11062,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_DISABLE_EUTRAN_WHILE_NO_23G,modem_sbp_config[137].SBP_DISABLE_EUTRAN_WHILE_NO_23G,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable EUTRAN for the current PLMN and search next available LTE PLMN<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes) 0<BR>[Init]<BR>[Test Step] set SBP on<BR>[Expected Result] SBP_DISABLE_EUTRAN_WHILE_NO_23G TRUE,Untested,,,,
-11063,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_NR_RRC_CONNECTED_SIB1_FAIL_ENHANCEMENT,modem_sbp_config[137].SBP_NR_RRC_CONNECTED_SIB1_FAIL_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Trigger error recovery procedure after unsuccessful SIB1 reception in RRC-CONNECTED.<BR>bit 0:0:Enhancement disabled<BR>bit 1:1:Enhancement enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,Option 2,5G Architecture,,,Trigger SBI1 reception failure in RRC_CONNECTED,Untested,,,,
-11069,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Force to use reduced CAT (CAT12) and CA table whether the plmn is<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+11041,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[134].SBP_TITAN_SKIP_LDU_CHECK,modem_sbp_config[134].SBP_TITAN_SKIP_LDU_CHECK,OTA and OTA BY OP,no,no,no,yes,"This SBP controls Titan's LDU check function. If enabled, the LDU check is<BR>skipped. If disabled LDU check will be performed.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+11042,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_UAS_RESET_FREQUENCY_CORRECTION_FOR_CELL_SEL,modem_sbp_config[136].SBP_UAS_RESET_FREQUENCY_CORRECTION_FOR_CELL_SEL,OTA and OTA BY OP,no,no,no,yes,"During CELL selection, Reset the Frequency correction when MCC priority search is triggered and Cell selection failed",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11043,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[136].SBP_VZW_SWITCH_REQUIREMENT_VERSION_FOR_SSAC,modem_sbp_config[136].SBP_VZW_SWITCH_REQUIREMENT_VERSION_FOR_SSAC,OTA and OTA BY OP,no,no,no,yes,"SSAC information shall NOT be applied when the RRC state is connected when the SBP is enabled and <BR>when this SBP is disabled, the SSAC information shall be appplied regardless of the RRC state.",BIT,1,,1,__TC10__: 1,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,The SBP is enabled by default,MD Config,Modem - Customer Requirement,,,1.Enable/disable the SBP : SBP_VZW_SWITCH_REQUIREMENT_VERSION_FOR_SSAC <BR>2.Boot up the UE and initiate the IMS MMTEL procedure.<BR>3.Observe the SSAC information sent to AP,Pass,,,,
+11044,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[94].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,modem_sbp_data_config[94].SBP_4G5_VGSM_INIT_MOD_BACKOFF_TIME,OTA and OTA BY OP,no,no,no,yes,"If a PDU session interworking from 4G to 5G, it must need to update capability to 5G by PDU session modification procedure if it's the first contact to 5G of this PDU session.<BR><BR>There's high chance that it would collide with MT modification procedure initiated by NW.<BR><BR>To enhance the flow, we create this backoff timer to try to avoid the collision.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~5:To control the backoff time (second) to update capability to Network in 4G to 5G with N26 interworking case for avoiding MO/MT PDU session modification collision.,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+11045,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[102].SBP_ENDC_EN_AMPR,modem_sbp_data_config[102].SBP_ENDC_EN_AMPR,OTA and OTA BY OP,no,no,no,yes,This feature is used to enable/disable enhanced AMPR table for intraband B41 ENDC.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11046,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[92].SBP_IDC_GNSSPWR_EN,modem_sbp_data_config[92].SBP_IDC_GNSSPWR_EN,OTA and OTA BY OP,no,no,no,yes,"This feature is use to lte powerback with B13, 14 with Gps on",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,In-Device Coexistence (IDC),Cross CONSYS,,,Test in machine (Y/N)<BR> Test Time (minutes)<BR> [Init]<BR> [Test Step]<BR> [Expected Result],Untested,,,,
+11047,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[93].SBP_IDC_IM_TX_PWR_FOR_GPS,modem_sbp_data_config[93].SBP_IDC_IM_TX_PWR_FOR_GPS,OTA and OTA BY OP,no,no,no,yes,"The value is applied to LTE Tx max power after IDC notifies lte Band 13, and GPS ON",BIT,8,,8,0x11,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,In-Device Coexistence (IDC),Cross CONSYS,,,Test in machine (Y/N)<BR> Test Time (minutes)<BR> [Init]<BR> [Test Step]<BR> [Expected Result],Untested,,,,
+11048,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,modem_sbp_data_config[97].SBP_NWSEL_LTE_REJ_RETRY_COUNTER_MAX,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, UE will retry to search the same PLMN's LTE when UE received network reject.<BR>Once the PLMN's LTE retry counter reaches maximum, UE will disable the PLMN's LTE and search UMTS/GSM.<BR>This SBP data defines the maximum retry counter of the LTE reject retry mechanism.",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0x01~0x05,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,MD Config,Modem - Customer Requirement,,,Let UE be rejected by network,Pass,,,,
+11049,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,modem_sbp_data_config[99].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the LTE disable timer is composed of value multiplied by unit.<BR>This SBP data defines the unit of LTE disable timer.<BR>The value of LTE disable timer is defined by SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE.",BIT,8,,8,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,1~5,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,,,,,Let UE be rejected by network,Untested,,,,
+11050,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,modem_sbp_data_config[98].SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the LTE disable timer is composed of value multiplied by unit.<BR>This SBP data defines the value of LTE disable timer.<BR>The unit of LTE disable timer is defined by SBP_NWSEL_LTE_REJ_RETRY_DISABLE_TIMER_UNIT.",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,,,,,,Untested,,,,
+11051,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,modem_sbp_data_config[96].SBP_NWSEL_LTE_REJ_RETRY_MECHANISM,OTA and OTA BY OP,no,no,no,yes,"1. LTE reject retry mechanism: <BR>Customer can configure UE to apply reject retry mechanism on a slide-window basis in order to decrease the power usage of UE. Customer can configure lengths of (1)LTE disable timer, (2)slide-window and (3)reject counter to meet the variant requirements. The main workflow is that: if UE get reject by LTE NW within slide-window, the reject counter will increase. Once counter is over the maximum value, UE will disable LTE for a customized period.<BR><BR>2. This SBP data is the main switch for LTE reject retry mechanism, <BR>and it decides that the mechanism is applied to reject 15 or reject 13 or both of them.<BR><BR>[Note 1] This SBP data takes effect on reject 13 or reject 15 only when the corresponding SBPs is turning on.<BR>e.g. #13 -> SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED, #15 -> SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE<BR>[Note 2] Bit Map design, <BR>e.g. apply to #13 = 0x01, apply to #15 = 0x02, and then apply to both = 0x01 | 0x02 = 0x03",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0x00~0x03,,,This SBP data depends on SBP_DISABLE_EUTRAN_AFTER_NO_SUITABLE and SBP_DISABLE_EUTRAN_AFTER_ROAMING_NOT_ALLOWED.,MD Config,Modem - Customer Requirement,,,Let NW reject UE multiple times with #13/#15.,Pass,,,,
+11052,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[101].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,modem_sbp_data_config[101].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the record life timer is composed of value multiplied by unit.<BR>This SBP data defines the unit of the record life timer.<BR>The value of the record life timer is defined by SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE.",BIT,8,,8,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,0~5,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,MD Config,Modem - Customer Requirement,,,Let UE reject by network,Pass,,,,
+11053,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,modem_sbp_data_config[100].SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"For LTE reject retry mechanism, the record life timer is composed of value multiplied by unit.<BR>This SBP data defines the value of the record life timer.<BR>The unit of the record life timer is defined by SBP_NWSEL_LTE_REJ_RETRY_RECORD_LIFE_TIMER_UNIT.",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This SBP data depends on SBP_NWSEL_LTE_REJECT_RETRY.,,,,,,Untested,,,,
+11054,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[104].SBP_PDCP_DISC_TMR_VOICE_RB,modem_sbp_data_config[104].SBP_PDCP_DISC_TMR_VOICE_RB,OTA and OTA BY OP,no,no,no,yes,Value of PDCP discard timer for voice RB (in ms),BIT,8,,8,0x09,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x00: 10ms, 0x01: 20ms, 0x02: 30ms, 0x03: 40ms, 0x04: 50ms, 0x05: 60ms, 0x06: 75ms, 0x07: 100ms, 0x08: 150ms, 0x09: 200ms, 0x0A: 250ms, 0x0B: 300ms, 0x0C: 500ms, 0x0D: 750ms, 0x0E: 1500ms, 0x0F: infinity",,,N/A,MD Config,Modem - Customer Requirement,,,"internet test, volte test",Pass,,,,
+11055,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[105].SBP_RTT_T57M,modem_sbp_data_config[105].SBP_RTT_T57M,OTA and OTA BY OP,no,no,no,yes,"This provides the value for 1xRTT power-up/Initialization timer which is enable after power up.When the timer is active, 1xRTT can not make any register.<BR>We provide this SBP to customize T57m,and the default value is 20seconds as C.S0005 defined.",BIT,8,,8,0x14,NR15.R3.MD700.IVT.MP1MR3.MP,,short: 0~20,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine :N<BR>Test Time (minutes): 1<BR>[Init]<BR>1. modify modem_sbp_data_config[105].SBP_RTT_T57M as 5<BR>2. insert CT card and disable VoLTE<BR>[Test Step]<BR>1. power on the phone<BR>2. wait 10s, make MT call<BR>[Expected Result]<BR>MT call success",Pass,,,,
+11056,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[95].SBP_TX_PCMAX_OFFSET,modem_sbp_data_config[95].SBP_TX_PCMAX_OFFSET,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to turn on/off the adjustment to (1) pcmax of LTE SA, (2) total max power of ENDC and pcmax of NR and LTE in ENDC scenario.",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11057,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[91].SBP_WCDMA_RRC_FEATURE,modem_sbp_data_config[91].SBP_WCDMA_RRC_FEATURE,OTA and OTA BY OP,no,no,no,yes,This SBP enables/disables WCDMA RRC Feature.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,Enable/ Disable SBP.<BR>Check RRC connection establishment message content.,Untested,,,,
+11058,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[103].SBP_WCDMA_RRC_FEATURE_EXT,modem_sbp_data_config[103].SBP_WCDMA_RRC_FEATURE_EXT,OTA and OTA BY OP,no,no,no,yes,This SBP enables/disables additional WCDMA RRC Feature. This SBP is extended version of SBP_WCDMA_RRC_FEATURE.,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,Enable/ Disable SBP.<BR>Check RRC connection establishment message content.,Untested,,,,
+11062,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_DISABLE_EUTRAN_WHILE_NO_23G,modem_sbp_config[137].SBP_DISABLE_EUTRAN_WHILE_NO_23G,OTA and OTA BY OP,no,no,no,yes,Disable EUTRAN capbilities upon CS voice or PS unavailable as per TS 24.301 while there is no 23G rat mode and IMS is configured ON,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,"if compile option __SBP_DISABLE_EUTRAN_WHILE_NO_23G__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes) 0<BR>[Init]<BR>[Test Step] set SBP on<BR>[Expected Result] SBP_DISABLE_EUTRAN_WHILE_NO_23G TRUE,Untested,,,,
+11063,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[137].SBP_NR_RRC_CONNECTED_SIB1_FAIL_ENHANCEMENT,modem_sbp_config[137].SBP_NR_RRC_CONNECTED_SIB1_FAIL_ENHANCEMENT,OTA and OTA BY OP,no,no,no,yes,"When this SBP is turned on, RRC connection re-establishment or RRC connection release is<BR>triggered in NR as error recovery procedure after unsuccessful SIB1 reception in RRC-CONNECTED.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,Option 2,5G Architecture,,,Trigger SBI1 reception failure in RRC_CONNECTED,Untested,,,,
+11069,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,modem_sbp_config[138].SBP_FORCE_USE_REDUCED_CAT_CA_TABLE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
11072,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_block_wifi_until_srvcc_call_end,ipol_ans_cfg.ipol_ims_block_wifi_until_srvcc_call_end,OTA and OTA BY OP,no,no,no,no,"[MCF]When enable, UE will not attempt IMS over WLAN until SRVCC CS call end<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~1,,,none,MD Config,Modem - Customer Requirement,,,"Make IMS call in VoLTE, SRVCC call to 3G, keep call ongoing in CS, WiFi become availalble. Observer that UE does not attempt to make IMS reg in wifi until call in CS in ended.",Pass,,,,
11081,2191,NVRAM_EF_D2_MCF_APN_CFG_LID,1,mvno_match_data,apn_cfg[0~9].mvno_match_data,OTA BY OP,no,no,no,yes,[MCF]Match data of corresponding MVNO type,UNSIGNED CHAR,100,100,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,char: any,,,,MCF (Modem Configuration Framework),MCF,,,Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>1. Configure mvno_match_data in NVRAM_EF_D2_MCF_APN_CFG_LID<BR>[Test Step]<BR>1. Boot up the phone and insert VZW SIM card<BR>2. Use MCF dump to dump files<BR>[Expected Result]<BR>Check MCF dump file is the same as configured OTA content,Pass,,,,
11082,2191,NVRAM_EF_D2_MCF_APN_CFG_LID,1,mvno_type,apn_cfg[0~9].mvno_type,OTA BY OP,no,no,no,no,"[MCF]MVNO type {GID, IMSI}",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,char: 0-2,,,,MCF (Modem Configuration Framework),MCF,,,Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>1. Configure mvno_type in NVRAM_EF_D2_MCF_APN_CFG_LID<BR>[Test Step]<BR>1. Boot up the phone and insert VZW SIM card<BR>2. Use MCF dump to dump files<BR>[Expected Result]<BR>Check MCF dump file is the same as configured OTA content,Pass,,,,
@@ -9745,16 +9745,16 @@
11107,1261,NVRAM_EF_MML1_MIPI_ANT_TUNER_INITIAL_CW_LID,1,mipi_port_sel,ant_tuner_initial_cw_table.mipi_init_data[0~15].mipi_port_sel,OTA,no,no,yes,no,mipi_port_sel,UNSIGNED SHORT,2,,,any,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,Engineering Mode Front-End Device Controls,Engineering Mode,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11108,1261,NVRAM_EF_MML1_MIPI_ANT_TUNER_INITIAL_CW_LID,1,mipi_usid,ant_tuner_initial_cw_table.mipi_init_data[0~15].mipi_usid,OTA,no,no,yes,no,mipi_usid,UNSIGNED CHAR,1,,,any,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,Engineering Mode Front-End Device Controls,Engineering Mode,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11109,1261,NVRAM_EF_MML1_MIPI_ANT_TUNER_INITIAL_CW_LID,1,mipi_wait_time,ant_tuner_initial_cw_table.mipi_init_data[0~15].mipi_wait_time,OTA,no,no,yes,no,mipi_wait_time,UNSIGNED INT,4,,,any,NR15.R3.MD700.IVT.MP1MR3.MP,,any,,,,Engineering Mode Front-End Device Controls,Engineering Mode,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-11110,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_5G_SA_ROHC_TCP_PROFILE_SUPPORT,modem_sbp_config[138].SBP_5G_SA_ROHC_TCP_PROFILE_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>5G SA ROHC TCP profile support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-11111,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_5G_SA_UPLINK_ONLY_ROHC_TCP_PROFILE_SUPPORT,modem_sbp_config[138].SBP_5G_SA_UPLINK_ONLY_ROHC_TCP_PROFILE_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>5G SA uplink-only ROHC TCP profile support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-11112,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_DISABLE_N1_WHEN_SUCI_UNPROTECTED,modem_sbp_config[139].SBP_DISABLE_N1_WHEN_SUCI_UNPROTECTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Configure if UE need to disable N1 when SUCI not protected<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bool: False,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>Insert SIM with/without SUCI protected<BR>[Expected Result]<BR>UE search enable/ disable N1,Pass,,,,
-11113,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_DISABLE_UL_256QAM,modem_sbp_config[138].SBP_DISABLE_UL_256QAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable / disable UL 256QAM.<BR>bit 0:0:Not Enabled: Default behavior<BR>bit 1:1:Enabled: Apply disable UL 256QAM",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Enabled: Default behavior<BR>1:Enabled: Apply disable UL 256QAM<BR>bit: 0/1,,,,5G option capability update,MTK Proprietary,,,Test in machine (N)<BR>Test Time (2 minutes)<BR>[Init]<BR>flight mode<BR>[Test Step]<BR>1.Modify SBP_DISABLE_UL_256QAM as TRUE in META<BR>2.enter flight mode<BR>3.leave flight mode<BR>4.Camp on cell success<BR>5.Record log<BR><BR>[Expected Result]<BR>UL 256QAM is disabled,Untested,,,,
-11114,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_EMM_SR_REJECT_ATTEMPT_BACK_OFF,modem_sbp_config[138].SBP_EMM_SR_REJECT_ATTEMPT_BACK_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM enable Service Reject Attempt back-off mechanism<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-11115,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_GAS_CUSTOM_MAX_CELL_TO_TRY_FOR_STORED_SEARCH,modem_sbp_config[139].SBP_GAS_CUSTOM_MAX_CELL_TO_TRY_FOR_STORED_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use GAS default value: maximum number of stored list type search cells<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : NA<BR> [Init] : Customer need to configuration Max ARFCN to try Customer configuratiion valable: custom_max_arfcn_to_try_for_stored_search on custimer file<BR> [Test Step] : Try normal camping on GSM<BR> [Expected Result] : UE should be camping successfully on GSM,Untested,,,,
-11116,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_IPC_SA_ENABLE,modem_sbp_config[139].SBP_IPC_SA_ENABLE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Indicate if the SA is enabled for IPC modules<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-11117,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_PLMN_BASED_T3502,modem_sbp_config[138].SBP_PLMN_BASED_T3502,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>T3502 is maintained per PLMN basis.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,(VzW) LTE Data _ LTE Data Retry,OP Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-11118,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_TFT_FURTHER_PROCESS_PF_PRECED_CONFLICT,modem_sbp_config[138].SBP_TFT_FURTHER_PROCESS_PF_PRECED_CONFLICT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Further process pf precedence conflict without dedicated bearer deactivation by reference to 3GPP R16 24.301 CR3372r1.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-11119,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_VZW_V2E_SET_ACTIVE_FLAG,modem_sbp_config[138].SBP_VZW_V2E_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE will set the 'active' flag in the TAU request after intersystem from 5G to 4G<BR>bit 0:0:Disabled. UE will not set the 'active' flag in the TAU request when TAU is triggered by redirect / ir search / cell reselection from 5G to 4G.<BR>bit 1:1:Enabled. UE will set the 'active' flag in the TAU request when TAU is triggered by redirect / ir search / cell reselection from 5G to 4G<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,D-SBP,SBP,,,,Untested,,,,
+11110,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_5G_SA_ROHC_TCP_PROFILE_SUPPORT,modem_sbp_config[138].SBP_5G_SA_ROHC_TCP_PROFILE_SUPPORT,OTA and OTA BY OP,no,no,no,yes,To enable 5G SA ROHC TCP profile support to fulfill operator requirement.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11111,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_5G_SA_UPLINK_ONLY_ROHC_TCP_PROFILE_SUPPORT,modem_sbp_config[138].SBP_5G_SA_UPLINK_ONLY_ROHC_TCP_PROFILE_SUPPORT,OTA and OTA BY OP,no,no,no,yes,To enable 5G SA uplink-only ROHC TCP profile support to fulfill operator requirement.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11112,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_DISABLE_N1_WHEN_SUCI_UNPROTECTED,modem_sbp_config[139].SBP_DISABLE_N1_WHEN_SUCI_UNPROTECTED,OTA and OTA BY OP,no,no,no,yes,"Configure if UE need to disable N1 when SUCI not protected.<BR><BR>NOTE1: 4G SIM card usually don't have SUCI, this SBP will block 4G SIM card to use 5G SA service",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bool: False,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>Insert SIM with/without SUCI protected<BR>[Expected Result]<BR>UE search enable/ disable N1,Pass,,,,
+11113,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_DISABLE_UL_256QAM,modem_sbp_config[138].SBP_DISABLE_UL_256QAM,OTA and OTA BY OP,no,no,no,yes,"To disable capability of UL 256QAM.<BR>If this SBP is turn ON, UE will set supportedModulationOrderUL as 64QAM and set pusch_256QAM as not support.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Enabled: Default behavior<BR>1:Enabled: Apply disable UL 256QAM<BR>bit: 0/1,,,N/A,5G option capability update,MTK Proprietary,,,Test in machine (N)<BR>Test Time (2 minutes)<BR>[Init]<BR>flight mode<BR>[Test Step]<BR>1.Modify SBP_DISABLE_UL_256QAM as TRUE in META<BR>2.enter flight mode<BR>3.leave flight mode<BR>4.Camp on cell success<BR>5.Record log<BR><BR>[Expected Result]<BR>UL 256QAM is disabled,Untested,,,,
+11114,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_EMM_SR_REJECT_ATTEMPT_BACK_OFF,modem_sbp_config[138].SBP_EMM_SR_REJECT_ATTEMPT_BACK_OFF,OTA and OTA BY OP,no,no,no,yes,This SBP feature option is used to enable SR attempt back-off mechanism after receiving SR reject with cause other.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+11115,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_GAS_CUSTOM_MAX_CELL_TO_TRY_FOR_STORED_SEARCH,modem_sbp_config[139].SBP_GAS_CUSTOM_MAX_CELL_TO_TRY_FOR_STORED_SEARCH,OTA and OTA BY OP,no,no,no,yes,Customer can configure the maximum number of stored list type search cells.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:bit: 0/1,,,This feature is controled by __CUSTOMER_2G_MAX_STORED_SEARCH_CELL__ flag,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) : Y<BR> Test Time (minutes) : NA<BR> [Init] : Customer need to configuration Max ARFCN to try Customer configuratiion valable: custom_max_arfcn_to_try_for_stored_search on custimer file<BR> [Test Step] : Try normal camping on GSM<BR> [Expected Result] : UE should be camping successfully on GSM,Untested,,,,
+11116,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_IPC_SA_ENABLE,modem_sbp_config[139].SBP_IPC_SA_ENABLE,Not Support,no,no,no,yes,Report the SA enable/disable status for IPC modules.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+11117,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_PLMN_BASED_T3502,modem_sbp_config[138].SBP_PLMN_BASED_T3502,OTA and OTA BY OP,no,no,no,yes,"In some operator requirements, T3502 timer is required to be maintained per PLMN basis.<BR>And such T3502 per PLMN is expected to run entirely once it's started. When PLMN-based <BR>T3502 is enabled, a PLMN is not expected to be selected if T3502 is running for the <BR>same PLMN in normal case.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,(VzW) LTE Data _ LTE Data Retry,OP Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11118,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_TFT_FURTHER_PROCESS_PF_PRECED_CONFLICT,modem_sbp_config[138].SBP_TFT_FURTHER_PROCESS_PF_PRECED_CONFLICT,OTA and OTA BY OP,no,no,no,yes,"By reference to 3GPP R16 24.301 CR3372r1, if the old packet filters do not belong to the default EPS bearer context, the UE shall not diagnose an error, <BR>shall further process the new request and, if it was processed successfully, shall delete the old packet filters which have identical filter precedence values.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,N/A,MD Config,Modem - Customer Requirement,,,[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11119,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[138].SBP_VZW_V2E_SET_ACTIVE_FLAG,modem_sbp_config[138].SBP_VZW_V2E_SET_ACTIVE_FLAG,OTA and OTA BY OP,no,no,no,yes,Operator requirement : <BR>When UE sends NAS TAU Request UE shall set the EPS update type to "TA Updating with active flag indicating -<BR>1. bearer establishment Requested" for Idle Mode Mobility Registration <BR>2. no bearer establishment Requested" for Connected Mode Mobility Registration<BR>This SBP is for UE to set the 'active' flag in the TAU request when TAU is triggered by redirect / ir search / cell reselection from 5G to 4G.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,User could use compile option __SBP_VZW_V2E_SET_ACTIVE_FLAG__ to switch the setting of this SBP.,D-SBP,SBP,,,,Untested,,,,
11120,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",dns_failover,http_info.dns_failover,OTA and OTA BY OP,no,no,no,no,DNS Failover to support retry multiple XCAP IP addresses<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,XCAP IMS-SS,XCAP,,,"The test is based on network status, but we could verify no side effect even we enable it. <BR>Test in machine (Y/N)N<BR> Test Time (minutes)5<BR> [Init]<BR> Insert support XCAP SIM to phone, and boot up.<BR> [Test Step]<BR> 1. enable the configuration to 1(Enable);<BR> 2. go to call forwarding UI;<BR> 3. enable CFU;<BR> [Expected Result]<BR> In step 2, query call forwarding status no error happen;<BR> In step 3, enable CFU successfully.",Pass,,,,
11121,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",dns_failover.dns_failover,http_info.dns_failover.dns_failover,Not Support,no,no,no,no,DNS Failover<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
11122,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",hide_port_number,http_info.hide_port_number,OTA and OTA BY OP,no,no,no,no,Hide Port Number in HTTP header<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,XCAP IMS-SS,XCAP,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 5<BR> [Init]<BR> Insert support XCAP SIM card and boot up;<BR> [Test Step]<BR> 1. Enable the configuration(set to 1);<BR> 2. Go call forwarding UI;<BR> 3. Enable CFU;<BR> [Expected Result]<BR> Check wireshark log, in HTTP GET and PUT, there should be no port number included in the URL.",Pass,,,,
@@ -9764,38 +9764,38 @@
11126,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_sip_instance_in_contact.b1,ua_config.omit_sip_instance_in_contact.b1,OTA and OTA BY OP,no,no,no,no,[MCF] This parameter is used to control +sip.instance header field parameter in IMS call contact header. Giving possibility to follow RFC 7255 recommendation.<BR>If set UE omit +sip.instance in conference call event package SUBSCRIBE and REFER messages,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0x00~0x03,,,-,IMS,IMS,,,Enable setting and create MO IMS call. Observer contact URI of INVITE and check that sip.instance is not visible in contact header.,Untested,,,,
11127,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_sip_instance_in_contact.b2,ua_config.omit_sip_instance_in_contact.b2,OTA and OTA BY OP,no,no,no,no,[MCF] This parameter is used to control +sip.instance header field parameter in IMS call contact header. Giving possibility to follow RFC 7255 recommendation.<BR>reserved,BIT,6,,6,0x3f,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0x00~0x03,,,-,IMS,IMS,,,Enable setting and create MO IMS call. Observer contact URI of INVITE and check that sip.instance is not visible in contact header.,Untested,,,,
11130,57388,NVRAM_EF_NL1_MRDC_HPUE_SETTING_LID,1,nr_hpue_capability,mrdc_hpue_data[0~999].nr_hpue_capability,OTA,no,no,no,no,HPUE related items,ENUM,1,,,NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID,NR15.R3.MD700.IVT.MP1MR3.MP,,"NL1_CAP_POWER_CLASS_1~NL1_CAP_POWER_CLASS_3, NL1_CAP_UE_CA_POWER_CLASS_TYPE_INVALID",,,,5G option capability update,MTK Proprietary,,,UE connect to Meta tool(NVRAM editor),Untested,,,,
-11131,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_BLIND_FR_2G_FDD,modem_sbp_config[139].SBP_BLIND_FR_2G_FDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Whether blind FR for 2G FDD is activated<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) : NA<BR> [Init] : <BR> [Test Step] : <BR>1. Send AT command AT+ESBP=5,"SBP_BLIND_FR_2G_FDD",1<BR>2. UE will camp to 4g in 4g-2g mode, <BR>3. then trigger AT+COPS=1,2,"40445", 0 <BR>4. Make MO call, disconnect, immediately do one more mo call then disconnect.<BR><BR><BR> [Expected Result] : UE should do AFR to 4G",Untested,,,,
-11132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_GMSS_ENFORCE_3GPP_ANY_IN_MSPL,modem_sbp_config[139].SBP_GMSS_ENFORCE_3GPP_ANY_IN_MSPL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Add 3GPP_ALL ANY entry in the MSPL<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11133,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_MODEM_LTE_NON_ENDC_TO_ENDC_RESEL_THRESHOLD,modem_sbp_config[139].SBP_MODEM_LTE_NON_ENDC_TO_ENDC_RESEL_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MOB will check neighbor cell RSRP/RSRQ with ENDC prefer RSRP/RSRQ threshold<BR>bit 0:0:Not check neighbor cell RSRP/RSRQ with ENDC prefer RSRP/RSRQ threshold<BR>bit 1:1:Check neighbor cell RSRP/RSRQ with ENDC prefer RSRP/RSRQ threshold<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-11134,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_TRIGGER_SEARCH_WHEN_IMS_ON,modem_sbp_config[139].SBP_TRIGGER_SEARCH_WHEN_IMS_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable trigger search after IMS on.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,"Test in machine N<BR>Test Time (minutes)<BR>5<BR>[Init]<BR>Before turn off IMS, UE camp on 3G/4G.<BR>[Test Step]<BR>After turn on IMS, UE shall camp on 4G/5G again.<BR>[Expected Result]<BR>PASS",Untested,,,,
-11135,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MCCDB+BBL Enabled or Disabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,__TC10__<BR>__SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER__,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
-11138,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>User can disable NR band(s) by plmn<BR>bit 0:0:Not enabled this feature<BR>bit 1:1:Enable this feature",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Feature disabled (0) or enabled (1).,,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
-11139,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR band disable by plmn can be used under test sim or test mode<BR>bit 0:0:Feature not enabled for test sim or test mode<BR>bit 1:1:Feature enabled for test sim or test mode",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Feature disabled (0) or enabled (1).,,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
-11144,1601,NVRAM_EF_EMM_SMART_IDLE_INFO_LID,"1,2",enable_local_release,enable_local_release,OTA,no,no,no,no,[MCF] enable local release RRC connection or not,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time: TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-11145,1601,NVRAM_EF_EMM_SMART_IDLE_INFO_LID,"1,2",target_num_of_smart_idle_tau_per_hour,target_num_of_smart_idle_tau_per_hour,OTA,no,no,no,no,"[MCF] the maximum allowed number of smart idle TAU per hour, unit in integer, value range [0..255], 0 is a special case that denotes unlimited",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~255,,,,MD Config,Modem - Customer Requirement,,,Test in machine:Y<BR>Test Time:TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-11146,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",t3502_val_in_sec,vgs_custom_t3502.custom_t3502_item[0~15].t3502_val_in_sec,OTA,no,no,no,no,Customized T3502 value in seconds,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~(2^16)-1,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] support MCF,Untested,,,,
-11147,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mcc1,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mcc1,OTA,no,no,no,no,mcc1,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11148,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mcc2,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mcc2,OTA,no,no,no,no,mcc2,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11149,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mcc3,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mcc3,OTA,no,no,no,no,mcc3,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11150,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mnc1,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mnc1,OTA,no,no,no,no,mnc1,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11151,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mnc2,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mnc2,OTA,no,no,no,no,mnc2,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11152,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mnc3,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mnc3,OTA,no,no,no,no,mnc3,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11153,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",vgs_default_drx,vgs_default_drx,OTA,no,no,no,no,[MCF] Default DRX,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~4,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
+11131,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_BLIND_FR_2G_FDD,modem_sbp_config[139].SBP_BLIND_FR_2G_FDD,OTA and OTA BY OP,no,no,no,yes,"This feature is to enhance LTE occupation rate in case 2G CS connection release including CSFB call,<BR>2G call,LU,SMS and so on. When 2G CS connection release,fast return to LTE would be triggered.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : Y<BR> Test Time (minutes) : NA<BR> [Init] : <BR> [Test Step] : <BR>1. Send AT command AT+ESBP=5,"SBP_BLIND_FR_2G_FDD",1<BR>2. UE will camp to 4g in 4g-2g mode, <BR>3. then trigger AT+COPS=1,2,"40445", 0 <BR>4. Make MO call, disconnect, immediately do one more mo call then disconnect.<BR><BR><BR> [Expected Result] : UE should do AFR to 4G",Untested,,,,
+11132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_GMSS_ENFORCE_3GPP_ANY_IN_MSPL,modem_sbp_config[139].SBP_GMSS_ENFORCE_3GPP_ANY_IN_MSPL,OTA and OTA BY OP,no,no,no,yes,This SBP is for GMSS module to add 3GPP_ALL ANY entry in the MSPL.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11133,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_MODEM_LTE_NON_ENDC_TO_ENDC_RESEL_THRESHOLD,modem_sbp_config[139].SBP_MODEM_LTE_NON_ENDC_TO_ENDC_RESEL_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turn ON, UE will check neighbor cell RSRP/RSRQ with ENDC prefer RSRP/RSRQ threshold. Only apply serv_non_endc_nbr_endc_offset when neighbor RSRP/RSRQ is lower than ENDC prefer RSRP/RSRQ threshold.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+11134,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_TRIGGER_SEARCH_WHEN_IMS_ON,modem_sbp_config[139].SBP_TRIGGER_SEARCH_WHEN_IMS_ON,OTA and OTA BY OP,no,no,no,yes,Trigger search when IMS turn on and UE mode is CS_PS_MODE_1/PS_MODE_1. It can help UE to back NR when turn on IMS.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine N<BR>Test Time (minutes)<BR>5<BR>[Init]<BR>Before turn off IMS, UE camp on 3G/4G.<BR>[Test Step]<BR>After turn on IMS, UE shall camp on 4G/5G again.<BR>[Expected Result]<BR>PASS",Untested,,,,
+11135,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,modem_sbp_config[139].SBP_COMBINE_MCCDB_BL_LTE_SUPPORT_BAND_FILTER,OTA and OTA BY OP,no,no,no,yes,SBP to control over 'MCCDB + BL' lte support band filter,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine: N<BR>Test Time (minutes): 10<BR>Init: follow MCF RD IT initial steps<BR>Test Step: follow MCF RDIT SOP <BR> change value from 0 to 1<BR> change value from 1 to 0<BR>Expected Result: Value changes in MCF dump,Pass,,,,
+11138,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"Disable NR band(s) based on plmn. Disable NR bands are not used in cell search.<BR>Contains two lists.<BR>1. positive list: if plmn match, disable related NR bands.<BR>2. inverted list: if plmn not match to any plmn in the inverted plmn group, disable related NR bands.<BR>User should modify nvram NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID to set positive/inverted NR band disable lists content.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Feature disabled (0) or enabled (1).,,,This feature can be turned on by __NR_BAND_DISABLE_BY_PLMN__ flag,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
+11139,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,modem_sbp_config[140].SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"NR band disable by plmn can be used under test sim or test mode.<BR>To use SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN_UNDER_TEST_SIM, user must enable SBP_NR_CUSTOM_DISABLE_BAND_BY_PLMN as well.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Feature disabled (0) or enabled (1).,,,This feature can be turned on by __NR_BAND_DISABLE_BY_PLMN_UNDER_TEST_SIM__ flag,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
+11144,1601,NVRAM_EF_EMM_SMART_IDLE_INFO_LID,"1,2",enable_local_release,enable_local_release,OTA,no,no,no,no,[MCF] enable local release RRC connection or not,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time: TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+11145,1601,NVRAM_EF_EMM_SMART_IDLE_INFO_LID,"1,2",target_num_of_smart_idle_tau_per_hour,target_num_of_smart_idle_tau_per_hour,OTA,no,no,no,no,"[MCF] the maximum allowed number of smart idle TAU per hour, unit in integer, value range [0..255], 0 is a special case that denotes unlimited",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~255,,,,MD Config,Modem - Customer Requirement,,,Test in machine:Y<BR>Test Time:TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+11146,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",t3502_val_in_sec,vgs_custom_t3502.custom_t3502_item[0~15].t3502_val_in_sec,OTA,no,no,no,no,Customized T3502 value in seconds,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~(2^16)-1,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] support MCF,Pass,,,,
+11147,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mcc1,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mcc1,OTA,no,no,no,no,mcc1,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
+11148,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mcc2,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mcc2,OTA,no,no,no,no,mcc2,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
+11149,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mcc3,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mcc3,OTA,no,no,no,no,mcc3,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
+11150,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mnc1,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mnc1,OTA,no,no,no,no,mnc1,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
+11151,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mnc2,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mnc2,OTA,no,no,no,no,mnc2,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
+11152,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",mnc3,vgs_custom_t3502.custom_t3502_item[0~15].target_plmn.mnc3,OTA,no,no,no,no,mnc3,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
+11153,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",vgs_default_drx,vgs_default_drx,OTA,no,no,no,no,[MCF] Default DRX,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~4,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
11154,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",vgs_default_drx.vgs_default_drx,vgs_default_drx.vgs_default_drx,OTA,no,no,no,no,[MCF] Default DRX<BR>Default DRX<BR>bit 0:0:DRX value not specified<BR>bit 1:1:DRX cycle parameter T = 32<BR>bit 2:2:DRX cycle parameter T = 64<BR>bit 3:3:DRX cycle parameter T = 128<BR>bit 4:4:DRX cycle parameter T = 256,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~4,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11155,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",enable_local_release,vgs_smart_idle_info.enable_local_release,OTA,no,no,no,no,enable local release RRC connection or not,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
-11156,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",target_num_of_smart_idle_mru_per_hour,vgs_smart_idle_info.target_num_of_smart_idle_mru_per_hour,OTA,no,no,no,no,"the maximum allowed number of smart idle MRU per hour, unit in integer, value range [0..255], 0 is a special case that denotes unlimited",UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~255,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Untested,,,,
+11155,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",enable_local_release,vgs_smart_idle_info.enable_local_release,OTA,no,no,no,no,enable local release RRC connection or not,ENUM,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
+11156,4228,NVRAM_EF_VGNAS_5GMM_CUSTOM_CONFIG_LID,"1,2",target_num_of_smart_idle_mru_per_hour,vgs_smart_idle_info.target_num_of_smart_idle_mru_per_hour,OTA,no,no,no,no,"the maximum allowed number of smart idle MRU per hour, unit in integer, value range [0..255], 0 is a special case that denotes unlimited",UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~255,,,,MD Config,Modem - Customer Requirement,,,Test plan of parameter <BR>Functional test step<BR>Format:<BR>Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result] Support MCF,Pass,,,,
11157,1792,NVRAM_EF_AS_BAND_SETTING_LID,"1,2",endc_nr_band,endc_nr_band,OTA and OTA BY OP,no,no,no,no,"[MCF] EN-DC NR band settings: bit j(LSB) in endc_nr_band[i] is 1, means band (i*8+j+1) is supported.",UNSIGNED CHAR,128,128,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xFF:EN-DC band support,,,,MD Config,Modem - Customer Requirement,,,No specific test requirement.,Pass,,,,
11160,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nr_normal_pdn_retry_count,imc_config.nr_normal_pdn_retry_count,OTA and OTA BY OP,no,no,no,no,"max ims pdn retry time for NR rat, reduce ims pdn retry if nr_quick_disable_support enabled<BR>0: no retry<BR>1: retry 1 time<BR>2: retry 2 times<BR>nr_quick_disable_support",UNSIGNED CHAR,1,,,3,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,,IMS,IMS,,,"IMS PDU Retry 3 times in NR, then NR disable",Untested,,,,
11161,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nr_normal_pdn_retry_count.nr_normal_pdn_retry_count,imc_config.nr_normal_pdn_retry_count.nr_normal_pdn_retry_count,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>max ims pdn retry time for NR rat, reduce ims pdn retry if nr_quick_disable_support enabled<BR>bit 0:0:no retry<BR>bit 1:1:retry 1 time<BR>bit 2:2:retry 2 times",BIT,8,,8,3,NR15.R3.MD700.IVT.MP1MR3.MP,,0~3,,,,IMS,IMS,,,"IMS PDU Retry 3 times in NR, then NR disable",Untested,,,,
11162,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nr_quick_disable_support,imc_config.nr_quick_disable_support,OTA and OTA BY OP,no,no,no,no,make nr quick disable if IMS PDN ACTIVE FAIL<BR>0: DISABLE<BR>1: ENABLE,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,IMS,IMS,,,"IMS PDU Retry 3 times in NR, then NR disable",Untested,,,,
11163,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nr_quick_disable_support.nr_quick_disable_support,imc_config.nr_quick_disable_support.nr_quick_disable_support,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>make nr quick disable if IMS PDN ACTIVE FAIL<BR>bit 0:0:DISABLE<BR>bit 1:1:ENABLE,BIT,8,,8,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,IMS,IMS,,,"IMS PDU Retry 3 times in NR, then NR disable",Untested,,,,
11164,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",unlock_reg_on_plmn_change.unlock_reg_on_plmn_change,imc_config.unlock_reg_on_plmn_change.unlock_reg_on_plmn_change,Not Support,no,no,no,no,[MCF]<BR>Reset IMS registration blocks on PLMN ID changes<BR>bit 0:0:keep blocks active even if PLMN ID changes<BR>bit 1:1:reset active blocks,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Reset active IMS registration blocks is PLMN ID changes,,,,IMS,IMS,,,"1) UE is roaming against test system on a foreign PLMN ID<BR>2) Initiate IMS registration<BR>3) Reject IMS registration with a permantent cause (e.g. 403 if setting "not_auto_reg_403" is enabled). UE will block further registration attempts.<BR>4) Change PLMN ID to home, UE should attempt IMS registration again",Untested,,,,
-11165,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_BAR_CELL_CAUSE_NOT_SHARED_WITH_SR_TRIGGERED,modem_sbp_config[140].SBP_BAR_CELL_CAUSE_NOT_SHARED_WITH_SR_TRIGGERED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Bar cell cause not shared with SR<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-11166,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_ERRC_CONSEC_RECONF,modem_sbp_config[140].SBP_ERRC_CONSEC_RECONF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Bar cell and trigger reestablish when heavily amount of reconf received<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
-11167,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_IPC_JSON_ENABLE,modem_sbp_config[140].SBP_IPC_JSON_ENABLE,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Indicate if enable the JSON IPC message<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+11165,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_BAR_CELL_CAUSE_NOT_SHARED_WITH_SR_TRIGGERED,modem_sbp_config[140].SBP_BAR_CELL_CAUSE_NOT_SHARED_WITH_SR_TRIGGERED,OTA and OTA BY OP,no,no,no,yes,"For the scenario with only one or a few cells, the severity of SR failure and TAU/Attach shall not be considered as same, otherwise UE may easily bar the cell and enter OOS, so the bar cell cause shall not be shared by the failure of SR and TAU/Attach.<BR>If this SBP is turned ON, For T3417 timeout and NW release connection case, SR and TAU/Attach would not use the same cause for barring cell, which means one of SR or TAU/ATTACH fail times reach the threshold, RRC would bar the cell.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11166,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_ERRC_CONSEC_RECONF,modem_sbp_config[140].SBP_ERRC_CONSEC_RECONF,OTA and OTA BY OP,no,no,no,yes,"This SBP is used to enable the feature - consec reconfiguration <BR>When UE received heavily amount of reconfiguration with same content, it might due to abnormal network behavior.<BR>UE cannot handling other procedures normally because of these abnormal reconfiguration.<BR>As a workaround, once UE detected consec reconfig occurred, it bars the cell and tirggers reestablishment.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+11167,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_IPC_JSON_ENABLE,modem_sbp_config[140].SBP_IPC_JSON_ENABLE,Not Support,no,no,no,yes,Used to control if using JSON format message for IPC modules.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
11168,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",play_local_tone_when_no_rtp_pkt_on_remote_hold,ua_config.play_local_tone_when_no_rtp_pkt_on_remote_hold,OTA and OTA BY OP,no,no,no,no,This parameter is used to control if rtp packet loss need to report to UA during hold<BR>0:disable<BR>1:enable<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:DUT should play local hold tone, when no RTP packets from the network.",,,No,IMS,IMS,,,IMS supplementary services-remote hold call,Untested,,,,
11169,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",play_local_tone_when_no_rtp_pkt_on_remote_hold.play_local_tone_when_no_rtp_pkt_on_remote_hold,ua_config.play_local_tone_when_no_rtp_pkt_on_remote_hold.play_local_tone_when_no_rtp_pkt_on_remote_hold,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>when remote call is kept at hold and no rtp pkt is received then play the local tone.<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: Disable<BR>1: Enable,,,,IMS,IMS,,,"During remote hold, if NW don't send RTP packets to play hold tone, then play local hold tone.",Untested,,,,
-11170,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_LTE_PREFER,modem_sbp_config[140].SBP_LTE_PREFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LTE prefer<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+11170,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_LTE_PREFER,modem_sbp_config[140].SBP_LTE_PREFER,OTA and OTA BY OP,no,no,no,yes,"If this feature is enabled, UE will <BR>> prefer LTE than NR on cell reselection",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
11171,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_ims_maintain_call_in_wifi_when_in_cs_preferred,ipol_ans_cfg.ipol_ims_maintain_call_in_wifi_when_in_cs_preferred,OTA and OTA BY OP,no,no,no,no,"[MCF]When enabled UE will maintain IMS registration and active call on WLAN, when CS preferred condition is true<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~1:Configuration is enabled or disabled,,,CS preferred operator configuration and WiFi deregister enabled.,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"When wifi call is active, and this configuration is false, call is dropped when UE enters for example 3G area where IMS not supported, or LTE area where VoLTE disabled.",Pass,,,,
11172,2376,NVRAM_EF_MRS_NR_BW_SETTING_LIST_LID,"1,2",bw_bitmap,nr_bw_setting_list[0~19].bw_per_band_setting_list[0~4].bw_scs_bitmap[0~2].bw_bitmap,OTA and OTA BY OP,no,no,no,no,"[MCF]BW bitmap, for FR1, the bits starting from the rightmost bit(LSB) indicate: 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100 mhz (Totally 13 bits are used.) E.g. 0x0003 means only 5 and 10 mhz are supported. For FR2, the bits starting from the rightmost bit(LSB) indicate: 50, 100, 200, 400 mhz (Totally 4 bits are used.) E.g. 0x0004 means only 200 mhz is supported.",UNSIGNED SHORT,2,,,"0x02, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,"0-8191:For FR1, the bits starting from the rightmost bit(LSB) indicate: 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100 MHz (Totally 13 bits are used.) E.g. 0x0003 means only 5 and 10 MHz BWs are supported. For FR2, the bits starting from the rightmost bit(LSB) indicate: 50, 100, 200, 400 MHz (Totally 4 bits are used.) E.g. 0x0004 means only 200 MHz BW is supported.",,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
11173,2376,NVRAM_EF_MRS_NR_BW_SETTING_LIST_LID,"1,2",scs,nr_bw_setting_list[0~19].bw_per_band_setting_list[0~4].bw_scs_bitmap[0~2].scs,OTA and OTA BY OP,no,no,no,no,"[MCF]SCS, 15,30,60 for FR1; 60,120 for FR2",UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,"15,30,60,120:Valid values for FR1: 15,30,60.<BR>Valid values for FR2: 60,120.",,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
@@ -9810,25 +9810,25 @@
11182,2376,NVRAM_EF_MRS_NR_BW_SETTING_LIST_LID,"1,2",mnc2,nr_bw_setting_list[0~19].plmn_list[0~19].mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,"0-9,F:MNC2 value. F means any value.",,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
11183,2376,NVRAM_EF_MRS_NR_BW_SETTING_LIST_LID,"1,2",mnc3,nr_bw_setting_list[0~19].plmn_list[0~19].mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,"0-9,F:MNC3 value. F means any value.",,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
11184,2376,NVRAM_EF_MRS_NR_BW_SETTING_LIST_LID,"1,2",num_of_nr_bw_setting_list_elems,num_of_nr_bw_setting_list_elems,OTA and OTA BY OP,no,no,no,no,[MCF]Number of NR BW setting list elements (max 20),UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0-19:Number of NR BW setting list elements.,,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
-11185,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_BW_SETTING_LIST,modem_sbp_config[140].SBP_NR_BW_SETTING_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set supported NR band BWs<BR>bit 0:0:Not enabled this feature<BR>bit 1:1:Enable this feature",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Feature disabled (0) or enabled (1).,,,,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
+11185,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_NR_BW_SETTING_LIST,modem_sbp_config[140].SBP_NR_BW_SETTING_LIST,OTA and OTA BY OP,no,no,no,yes,Set supported NR band BWs.These are defined per PLMN lists.<BR>User should modify nvram NVRAM_EF_MRS_NR_BW_SETTING_LIST_LID to set supported NR band BWs.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Feature disabled (0) or enabled (1).,,,This feature can be turned on by __NR_BW_SETTING_LIST__ flag,MD Config,Modem - Customer Requirement,,,No specific test plan.,Pass,,,,
11186,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",xcap_pdn_alignment_setting,xcap_ans_cfg.xcap_pdn_alignment_setting,OTA and OTA BY OP,no,no,no,no,[MCF]Let RAT selection of XCAP align target pdn when target pdn is avtivated.<BR>alignment:8 "" <BR>1:"Default";<BR>2:"IMS";<BR>3:"MMS";<BR>4:"EMERGENCY";<BR>5:"XCAP";<BR>6:"RCS";<BR>7:"BIP";<BR>8:"SUPL";<BR>9:"VSIM";<BR><BR><BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1~9:1:Default<BR>2:IMS<BR>3:MMS<BR>4:EMERGENCY<BR>5:XCAP<BR>6:RCS<BR>7:BIP<BR>8:SUPL<BR>9:VSIM,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,This configuration can't not observed by UI behavior.<BR><BR>1. Setting XCAP align IMS PDN<BR>2. Enable VoWIFI or VoLTE<BR>3. Switch IMS between VoWIFI and VoLTE and enable XCAP PDN<BR>4. check log that does XCAP set up PDN follow target PDN.<BR>it's meaning that the RAT selection of XCAP should be the same with target PDN,Pass,,,,
11187,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",xcap_pdn_alignment_setting.alignment,xcap_ans_cfg.xcap_pdn_alignment_setting.alignment,Not Support,no,no,no,no,[MCF]Let RAT selection of XCAP align target pdn when target pdn is avtivated.<BR><BR>bit 1:1:Default<BR>bit 2:2:IMS<BR>bit 3:3:MMS<BR>bit 4:4:EMERGENCY<BR>bit 5:5:XCAP<BR>bit 6:6:RCS<BR>bit 7:7:BIP<BR>bit 8:8:SUPL<BR>bit 9:9:VSIM,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Untested,,,,
-11189,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_ENABLE_CA_CSR,modem_sbp_config[140].SBP_ENABLE_CA_CSR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable CA CSR<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Enable = 1 & Disable = 0,,,,"Network Search Optimization - Fast Roaming, Fast List, Early Roaming Detection",MTK Proprietary,,,"AT+ESBP=5, "SBP_ENABLE_CA_CSR",1",Untested,,,,
-11194,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>The record life timer for blacklist of Dynamic NR Cap Adjust mechanism",BIT,8,,8,0x18,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xFF,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
-11195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_LTE_APPLY_SINGLE_BAND_WW_FILTER_EVEN_NW_REQUEST_FREQBAND,modem_sbp_config[141].SBP_LTE_APPLY_SINGLE_BAND_WW_FILTER_EVEN_NW_REQUEST_FREQBAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not apply WW LTE band filter for single band when requestedFrequencyBands is given<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: FALSE; 1: TRUE,,,,MD Config,Modem - Customer Requirement,,,Perform NSA field trial in Amsterdam Netherland,Pass,,,,
-11196,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_PAM_RF_OFF_RESET_BLOCKING_STATUS,modem_sbp_config[141].SBP_PAM_RF_OFF_RESET_BLOCKING_STATUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reset all restrictions to UE's request imposed by PAM when UE entering air-plane mode<BR>0:Disabled<BR>1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+11189,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[140].SBP_ENABLE_CA_CSR,modem_sbp_config[140].SBP_ENABLE_CA_CSR,OTA and OTA BY OP,no,no,no,yes,Enable CA CSR,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,Enable = 1 & Disable = 0,,,N/A,"Network Search Optimization - Fast Roaming, Fast List, Early Roaming Detection",MTK Proprietary,,,"AT+ESBP=5, "SBP_ENABLE_CA_CSR",1",Untested,,,,
+11194,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,modem_sbp_data_config[106].SBP_CAP_DNCA_RECORD_LIFE_TIMER,OTA and OTA BY OP,no,no,no,yes,This SBP data used to set the record life timer for blacklist and whitelist of Dynamic NR Cap Adjust mechanism.,BIT,8,,8,0x18,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xFF,,,This SBP data depends on SBP_ERRC_DYNAMIC_NR_CAP_ADJUST.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): Y<BR><BR>Test Time (minutes): Less than 5 minutes<BR><BR>[Init] LTE load + internal phone + Test SIM<BR><BR>[Test Step]<BR>(1) Use new MCF tool to generate new OTA files<BR>(2) Use ADB put OTA files to /mnt/vendor/nvcfg/mdota<BR>(3) Replace new MCF EM mode & enable it<BR><BR>[Expected Result] Follow RD IT SOP to test LID, and do MCF dump then check the value has been updated",Pass,,,,
+11195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_LTE_APPLY_SINGLE_BAND_WW_FILTER_EVEN_NW_REQUEST_FREQBAND,modem_sbp_config[141].SBP_LTE_APPLY_SINGLE_BAND_WW_FILTER_EVEN_NW_REQUEST_FREQBAND,OTA and OTA BY OP,no,no,no,yes,"LTE supported band list and CA band combination capabilities could be filtered by tables in the worldwide LTE band spreadsheet (custom_lte_ca.xls).<BR>The default behavior is not to apply single band filtering by capability size table in the spreadsheet when network asks for EUTRA capability transfer<BR>by requestedFrequencyBands.<BR>If you suffer from interoperability issue because EUTRA capabiliy size is too large to be accepted by legacy site in the field, and you certainly knew<BR>all required LTE band(s) for this network, this SBP gives you an opportunity to force single band filtering by capability size table even <BR>requestedFrequencyBands is given by network.<BR>By enabling this SBP to reduce EUTRA capability size further, user experience is exempt from suffering temporary service interruption but comes a LTE <BR>band filter maintenance problem in the future. Use at your own risk.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: FALSE; 1: TRUE,,,"This feature is controlled by __APPLY_SINGLE_BAND_WW_FILTER_EVEN_NW_REQUEST_FREQBAND__, and SBP_LTE_DISABLE_SINGLE_BAND_WW_FILTER.",MD Config,Modem - Customer Requirement,,,Perform NSA field trial in Amsterdam Netherland,Pass,,,,
+11196,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_PAM_RF_OFF_RESET_BLOCKING_STATUS,modem_sbp_config[141].SBP_PAM_RF_OFF_RESET_BLOCKING_STATUS,OTA and OTA BY OP,no,no,no,yes,Reset all restrictions to UE's request imposed by PAM when UE entering air-plane mode,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
11197,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",skip_vdm_call_drop_rsrp_th,skip_vdm_call_drop_rsrp_th,OTA and OTA BY OP,no,no,no,no,[MCF]Customized serving cell RSRP threshold for skip measurement report judgment of CELL_REJ_CAUSE_VDM_CALL_DROP cell. (qdBm),SHORT,2,,,"0xf8, 0xfd,",NR15.R3.MD700.IVT.MP1MR3.MP,,int16,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
11198,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",skip_vdm_call_drop_rsrq_th,skip_vdm_call_drop_rsrq_th,OTA and OTA BY OP,no,no,no,no,[MCF]Customized serving cell RSRQ threshold for skip measurement report judgment of CELL_REJ_CAUSE_VDM_CALL_DROP cell. (qdB),SHORT,2,,,"0xb0, 0xff,",NR15.R3.MD700.IVT.MP1MR3.MP,,int16,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-11199,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_ENABLE_PARTIAL_BAND_IN_JAPAN,modem_sbp_config[141].SBP_ENABLE_PARTIAL_BAND_IN_JAPAN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable partial bands setting under JAPAN mcc.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-11200,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_SIM_DISABLE_MMSS_FILE_READ,modem_sbp_config[141].SBP_SIM_DISABLE_MMSS_FILE_READ,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip the DF MMSS file reading<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-11201,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_EMM_NOT_ATTEMPT_TO_REGISTER_LTE_UPON_RECEIPT_OF_CAUSE_16_17_18_22,modem_sbp_config[141].SBP_EMM_NOT_ATTEMPT_TO_REGISTER_LTE_UPON_RECEIPT_OF_CAUSE_16_17_18_22,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable start T3402 upon the receipt of Attach/TAU cause #16, #17, #18, #22<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time: TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-11202,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[107].SBP_VGSM_OPTIMIZED_T35XX_VALUE,modem_sbp_data_config[107].SBP_VGSM_OPTIMIZED_T35XX_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Optimize VGSM T3580/T3581/T3582 value if met connection problem<BR>bit 0:0:0: T3580/T3581/T3582 change to 0 seconds if met connection problem<BR>bit 1:1:1: T3580/T3581/T3582 change to 1 seconds if met connection problem<BR>bit 2:2:2: T3580/T3581/T3582 change to 2 seconds if met connection problem<BR>bit 3:3:3: T3580/T3581/T3582 change to 3 seconds if met connection problem<BR>bit 4:4:4: T3580/T3581/T3582 change to 4 seconds if met connection problem<BR>bit 5:5:5: T3580/T3581/T3582 change to 5 seconds if met connection problem<BR>bit 6:6:6: T3580/T3581/T3582 change to 6 seconds if met connection problem<BR>bit 7:7:7: T3580/T3581/T3582 change to 7 seconds if met connection problem<BR>bit 8:8:8: T3580/T3581/T3582 change to 8 seconds if met connection problem<BR>bit 255:255:ff: T3580/T3581/T3582 remains SEPC defined value if met connection problem<BR>",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~8}:T3580/T3581/T3582 change to X seconds if met connection problem<BR>0xFF:remains spec defined value if met connection problem,,,,MD Config,Modem - Customer Requirement,,,"SIM send PDU EST REQ, NW not response, change RF to SIM2",Untested,,,,
+11199,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_ENABLE_PARTIAL_BAND_IN_JAPAN,modem_sbp_config[141].SBP_ENABLE_PARTIAL_BAND_IN_JAPAN,OTA and OTA BY OP,no,no,no,yes,"Enable Partial Band setting under JAPAN mcc <BR>If the serving mcc is JAPAN mcc, UE will enable the partial band according to custom setting table(CUSTOM_PARTIAL_BAND_INFO_TBL) in custom_eas_config.c",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,"Feature could be enabled by enabling compiler option __ENABLE_PARTIAL_BAND_IN_JAPAN__ .<BR>Please make sure that the custom configuration is correct in CUSTOM_PARTIAL_BAND_INFO_TBL in custom_eas_config.c<BR>Also, this feature conflict with the existing feature (SBP_DISABLE_LTE_B41).",MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11200,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_SIM_DISABLE_MMSS_FILE_READ,modem_sbp_config[141].SBP_SIM_DISABLE_MMSS_FILE_READ,OTA and OTA BY OP,no,no,no,yes,This SBP allows ME to skip the DF MMSS file reading. This SBP can be disabled/enabled by any operator. If it is disabled then ME skips the<BR>DF MMSS file reading. Otherwise ME didn't skip the DF MMSS file reading.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"if compile option __DISABLE_MMSS_FILE_READ__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,,Untested,,,,
+11201,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_EMM_NOT_ATTEMPT_TO_REGISTER_LTE_UPON_RECEIPT_OF_CAUSE_16_17_18_22,modem_sbp_config[141].SBP_EMM_NOT_ATTEMPT_TO_REGISTER_LTE_UPON_RECEIPT_OF_CAUSE_16_17_18_22,OTA and OTA BY OP,no,no,no,yes,"SFR requirement: The UE shall not register on LTE for 12 minutes upon the receipt of cause 16/17/18/22.<BR>MTK design uses the mechanism of T3402, that is, start T3402 upon the receipt of Attach/TAU reject cause #16, #17, #18, #22.<BR>The duration can be flexible according to the T3402 value at the moment.<BR>Also applied when receiving Attach/TAU for EPS only with the cause above after sending combined attach/TAU request to the NW.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,This feature is controlled by __DISABLE_SBP_EMM_NOT_ATTEMPT_TO_REGISTER_LTE_UPON_RECEIPT_OF_CAUSE_16_17_18_22__,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time: TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
+11202,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[107].SBP_VGSM_OPTIMIZED_T35XX_VALUE,modem_sbp_data_config[107].SBP_VGSM_OPTIMIZED_T35XX_VALUE,OTA and OTA BY OP,no,no,no,yes,This SBP controls the optimized T35xx value when met connection problem,BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~8}:T3580/T3581/T3582 change to X seconds if met connection problem<BR>0xFF:remains spec defined value if met connection problem,,,N/A,MD Config,Modem - Customer Requirement,,,"SIM send PDU EST REQ, NW not response, change RF to SIM2",Untested,,,,
11203,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_url_simservs_prefix,xcap_info.remove_url_simservs_prefix,OTA and OTA BY OP,no,no,no,no,Remove url simservs prefix<BR>0:Disabled<BR>1:Enabled<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,XCAP IMS-SS,XCAP,,,Can not be tested since this is a customized feature only for Softbank/Japan,Pass,,,,
11204,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_url_simservs_prefix.remove_url_simservs_prefix,xcap_info.remove_url_simservs_prefix.remove_url_simservs_prefix,Not Support,no,no,no,no,remove url simservs prefix<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
-11207,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_MODEM_HST_ENDC_BAND_PERFERENCE,modem_sbp_config[141].SBP_MODEM_HST_ENDC_BAND_PERFERENCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MOB apply HST endc band perference feature<BR>bit 0:0:Not apply HST endc band perference feature<BR>bit 1:1:Apply HST endc band perference feature<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,High Speed Train (HST),MTK Proprietary,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
-11208,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_URSP_PRECONFIG_SUPPORT,modem_sbp_config[141].SBP_URSP_PRECONFIG_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>URSP Pre-configuration Support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11209,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_CSFB_SCHEDULED_DECISION_BY_23G_SIB_INFO,modem_sbp_config[142].SBP_CSFB_SCHEDULED_DECISION_BY_23G_SIB_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Support earlier CSFB capability decision scheduling without registration<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,(VzW) CDMA-Less,OP Requirement,,,Test in machine (N) <BR>Test Time (minutes) 0 <BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
-11210,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_CUSTOM_T3511_T3502_FOR_ABNORMAL_NW_RELEASE,modem_sbp_config[141].SBP_CUSTOM_T3511_T3502_FOR_ABNORMAL_NW_RELEASE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>T3511/T3502 customized for abnormal NW.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,NO,MD Config,Modem - Customer Requirement,,,turn on SBP,Pass,,,,
+11207,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_MODEM_HST_ENDC_BAND_PERFERENCE,modem_sbp_config[141].SBP_MODEM_HST_ENDC_BAND_PERFERENCE,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,High Speed Train (HST),MTK Proprietary,,,"Test in machine: N <BR>Test Time: 10 mins <BR>Test Step: Follow MCF RD IT SOP, and do MCF dump then check the value has been updated<BR>Expected Result: The value has been updated",Untested,,,,
+11208,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_URSP_PRECONFIG_SUPPORT,modem_sbp_config[141].SBP_URSP_PRECONFIG_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"With the feature enabled, MOD_URSP reads UE policies from the NVRAM at booting. Otherwise, MOD_URSP doesn`t.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+11209,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_CSFB_SCHEDULED_DECISION_BY_23G_SIB_INFO,modem_sbp_config[142].SBP_CSFB_SCHEDULED_DECISION_BY_23G_SIB_INFO,OTA and OTA BY OP,no,no,no,yes,"While UE is camped on LTE, decide if the network supports Circuit Switched Fallback (CSFB) to 2G or 3G networks for a user requested CS call is supported or not by the broadcasted system information which is reported to NAS.<BR>In the case of PS voice already known to be unavailable, this optimization enables the UE to decide early if EUTRAN needs to remain enabled for registration.<BR>Example Scenario:<BR>PLMN_A: Does not support 23G CSFB, and SSAC barring was configured by the network<BR>PLMN_B: Supports 23G CSFB scheduling<BR>UE configured in CS_PS_MODE-1, with VoLTE support<BR>Optimization Enable:<BR>UE camps on PLMN_A, and decides to disable EUTRAN services immediately, even without attempting registration as UE does not support voice over CS and PS domains.<BR>UE later camps on PLMN_B.<BR>Optimization Disable:<BR>UE camps on PLMN_A, and attempts registration. Based on the registration outcome will the UE decide to remain camped on PLMN_A.<BR>Camp on PLMN_A if UE is combined attached successfully on PLMN_A, else disable PLMN_A and camp on PLMN_B.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,This SBP can be controlled by compile option __DISABLE_CSFB_SCHEDULED_DECISION_BY_23G_SIB_INFO__,(VzW) CDMA-Less,OP Requirement,,,Test in machine (N) <BR>Test Time (minutes) 0 <BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Untested,,,,
+11210,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_CUSTOM_T3511_T3502_FOR_ABNORMAL_NW_RELEASE,modem_sbp_config[141].SBP_CUSTOM_T3511_T3502_FOR_ABNORMAL_NW_RELEASE,OTA and OTA BY OP,no,no,no,yes,"In some abnormal NW (not support SA), T3511/T3502 timer is required to be customized.<BR>(ex. Insert non-SA SIM and try to camp on SA) If REG/MAU is released abnormally, this setting could reduce the period in NW.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,turn on SBP,Pass,,,,
11215,2899,NVRAM_EF_L5_SIM_ENABLE_LID,1,flags,flags,OTA,no,no,no,no,[MCF]bit 0 mean fixed SIM,UNSIGNED CHAR,4,4,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
11216,2899,NVRAM_EF_L5_SIM_ENABLE_LID,1,multi_sim_support,multi_sim_support,OTA,no,no,no,no,[MCF]if support multi SIM,ENUM,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
11217,2899,NVRAM_EF_L5_SIM_ENABLE_LID,1,single_sim_slot,single_sim_slot,OTA,no,no,no,no,[MCF]which SIM slot (from 0) is enabled if only single SIM support,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -9836,15 +9836,15 @@
11219,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stop_err_resp_retx_when_not_needed.stop_err_resp_retx_when_not_needed,ua_config.stop_err_resp_retx_when_not_needed.stop_err_resp_retx_when_not_needed,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>if stop error response retransimission when not needed<BR>bit 0:0:not stop error response retransimission<BR>bit 1:1:stop error response retransimission,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable<BR>0:disable,,,,IMS,IMS,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>1 minutes<BR>[Init]<BR>UT environment<BR>[Test Step]<BR>run ut case ut_ua_mt_video_call_precondition_fail_02.c<BR>[Expected Result]<BR>pass,Untested,,,,
11223,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",first_pdn_cell_pref_apn_type.first_pdn_cell_pref_apn_type,comm_ans_cfg.first_pdn_cell_pref_apn_type.first_pdn_cell_pref_apn_type,Not Support,no,no,no,no,"[MCF]For certain APN type, Cellular preferred when PDN established 1st time after boot-up<BR>bits is independent for each PDN<BR>bit 0:0:Disable the function<BR>bit 1:1:bit 1 enable for default PDN<BR>bit 2:2:bit 2 enable for IMS PDN<BR>bit 4:4:bit 3 enable for MMS PDN<BR>bit 8:8:bit 4 enable for EMMERGENCY PDN<BR>bit 16:16:bit 5 enable for XCAP PDN<BR>bit 32:32:bit 6 enable for RCS PDN<BR>bit 64:64:bit 7 enable for BIP PDN<BR>bit 128:128:bit 8 enable for SUPL PDN<BR>bit 256:256:bit 9 enable for VSIM PDN",BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Untested,,,,
11224,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",cell_trtl_enable.cell_trtl_enable,comm_ans_cfg.trtl_cfg.cell_trtl_enable.cell_trtl_enable,Not Support,no,no,no,no,"[MCF]When enable, throttling handover back to Cell for cell_rove_in_trtl_time<BR><BR>bit 0:0:(bit 0 is functional enable bit) Disabled<BR>bit 1:1:(bit 0 is functional enable bit) Enable for all throttling if no specify bit 1 ~ bit 7<BR>bit 3:3:(bit 1 is enable for idle mode) IDLE mode throttling<BR>bit 5:5:(bit 2 is enable for in-call mode) In-Call mode throttling<BR>bit 7:7:Enable for both (IDLE and In-Call) throttling(raise both bit 1 and 2)",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Untested,,,,
-11225,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_DEFAULT_RPT_QUAN_NR_AS_TRIG,modem_sbp_config[142].SBP_DEFAULT_RPT_QUAN_NR_AS_TRIG,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>if reportQuantyCellNR absenst in B1/B2, deafult it as threshold type<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,,MD Config,Modem - Customer Requirement,,,"1. FT: Find a network that doesn't configure it for B1_NR or B2_NR.<BR>2. UTs: MOB4732001(1), MOB4732002(1), MOB4732004(1) and MOB4732005(1)",Pass,,,,
-11226,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_LTE_WITH_NR_NEIGHBOR_PREFER,modem_sbp_config[142].SBP_LTE_WITH_NR_NEIGHBOR_PREFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LTE search prefer cell with NR neighbor<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: LTE search does not prefer cell with NR neighbor.<BR>1: LTE search prefer cell with NR neighbor.,,,No,MD Config,Modem - Customer Requirement,,,"1) Prepare 2 LTE cells, cell A with NR neighbor in SIB24, cell B does not.<BR>2) cell A RSRP -75dBm, cell B RSRP -70dBm<BR>if SBP_LTE_WITH_NR_NEIGHBOR_PREFER is ON:<BR>3) Turn on UE then UE should camp on cell A<BR>otherwise:<BR>3) Turn on UE then UE should camp on cell B",Pass,,,,
+11225,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_DEFAULT_RPT_QUAN_NR_AS_TRIG,modem_sbp_config[142].SBP_DEFAULT_RPT_QUAN_NR_AS_TRIG,OTA,no,no,no,yes,"If this SBP enable, ERRC will send B1_NR/B2_NR measurement report with measResultCell <BR>according to threshold type if reportQuantyCellNR is absent.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,N/A,MD Config,Modem - Customer Requirement,,,"1. FT: Find a network that doesn't configure it for B1_NR or B2_NR.<BR>2. UTs: MOB4732001(1), MOB4732002(1), MOB4732004(1) and MOB4732005(1)",Pass,,,,
+11226,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_LTE_WITH_NR_NEIGHBOR_PREFER,modem_sbp_config[142].SBP_LTE_WITH_NR_NEIGHBOR_PREFER,OTA and OTA BY OP,no,no,no,yes,"It is a switch for 4G prefer to search cell with NR neighbor.<BR><BR>This SBP is requested by OPPO. When it turned on, UE will give "LTE cell with NR neighbor" higher priority during ERRC_CEL_CARRS_TYPE_FREQ_BEFORE_STORED phase search.<BR>Only cell with RSRP/RSRQ >= LTE_WITH_NR_NEIGHBOR_RSRP_THRESHOLD/LTE_WITH_NR_NEIGHBOR_RSRQ_THRESHOLD will be given higher priority. The values could be set in custom_eas_config.h<BR>This SBP is similar to SBP_ENDC_PREFER_SEARCH / SBP_LTE_CA_PREFER / SBP_LTE_LARGE_BW_PREFER, which also a switch for each search priority index. To define the sequence of these indexes, please refer to NVRAM_EF_MRS_SEARCH_PRIORITY_LIST setting.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0: LTE search does not prefer cell with NR neighbor.<BR>1: LTE search prefer cell with NR neighbor.,,,N/A,MD Config,Modem - Customer Requirement,,,"1) Prepare 2 LTE cells, cell A with NR neighbor in SIB24, cell B does not.<BR>2) cell A RSRP -75dBm, cell B RSRP -70dBm<BR>if SBP_LTE_WITH_NR_NEIGHBOR_PREFER is ON:<BR>3) Turn on UE then UE should camp on cell A<BR>otherwise:<BR>3) Turn on UE then UE should camp on cell B",Pass,,,,
11227,2117,NVRAM_EF_IWLAN_N3CF_PROFILE_LID,"1,2",pseudonym,n3cf_cfg.pseudonym,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>pseudonym: 8 "Support pseudonym identity in EAP authentication" <BR>0: "Disable";<BR>1: "Enable";<BR><BR><BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:"Disable"<BR>1:"Enable",,,n3cf_cfg.fastreauth.<BR>Identity priority: Fast Re-auth ID > Pseudonym ID > Permanent ID,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"[*Very hard to test]<BR>[Init]<BR>Using WFC sim.<BR>NW should support authentication using pseudonym.<BR>Set n3cf_cfg.fastreauth to 0<BR>Set n3cf_cfg.pseudonym to 1<BR>[Test Step]<BR>1. Trigger 1st WFC registration.<BR>2. Deregister WFC<BR>3. Trigger 2nd WFC registration.<BR>[Expected Result]<BR>1. In IKE AUTH responder (MID=02) (EAP-SUCC) of 1st WFC registration, check if there is AT_NEXT_PSEUDONYM attribute in AT_ENCR_DATA attribute. If no, means either NW has sent this attribute in previous registration or NW does not support pseudonym.<BR>2. In IKE AUTH initiator (MID=01) of 2nd WFC registration, check if it uses pseudonym derived from 1st registration in IDi (Identification payload)",Pass,,,,
11228,2117,NVRAM_EF_IWLAN_N3CF_PROFILE_LID,"1,2",pseudonym.pseudonym,n3cf_cfg.pseudonym.pseudonym,Not Support,no,no,no,no,[MCF]<BR>Support pseudonym identity in EAP authentication<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,,Untested,,,,
-11229,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_ELEVATOR_MODE_3G5,modem_sbp_config[142].SBP_ELEVATOR_MODE_3G5,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Turn on elevator mode for optimization of camping on NR cell when out of elevator<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11230,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_ELEVATOR_MODE_SA_4G5,modem_sbp_config[142].SBP_ELEVATOR_MODE_SA_4G5,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Turn on elevator mode for optimization of camping on NR cell when out of elevator<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,,5G Icon Display,MTK Proprietary,,,"1. FT: find a location with elevator, where<BR> - inner deep elevator with 4G signal only<BR> - outside elevator with 5G network<BR><BR>2. UT (12 UTs): <BR> = MOBSaElev000001~ MOBSaElev000003, MOB1100203(1) ~ MOB1100203(3)<BR> MOBSaElev000002(1) ~ MOBSaElev000002(4), MOB1100203(4)(1)~MOB1100203(4)(2)",Untested,,,,
+11229,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_ELEVATOR_MODE_3G5,modem_sbp_config[142].SBP_ELEVATOR_MODE_3G5,OTA and OTA BY OP,no,no,no,yes,"If this SBP enable, URRC will trigger AFR to NR with elevator mode flag set upon rrc connection release.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature can be enabled by __ELEVATOR_MODE_3G5__ flag,,,,,,Untested,,,,
+11230,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_ELEVATOR_MODE_SA_4G5,modem_sbp_config[142].SBP_ELEVATOR_MODE_SA_4G5,OTA and OTA BY OP,no,no,no,yes,"If this SBP enable, ERRC will trigger AFR to NR with SA 5G4 elevator mode flag set, including <BR>further trigger local_release when NR cell radio is acceptable.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable,,,This feature can be enabled by __ELEVATOR_MODE_SA_4G5__ flag,5G Icon Display,MTK Proprietary,,,"1. FT: find a location with elevator, where<BR> - inner deep elevator with 4G signal only<BR> - outside elevator with 5G network<BR><BR>2. UT (12 UTs): <BR> = MOBSaElev000001~ MOBSaElev000003, MOB1100203(1) ~ MOB1100203(3)<BR> MOBSaElev000002(1) ~ MOBSaElev000002(4), MOB1100203(4)(1)~MOB1100203(4)(2)",Untested,,,,
11231,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_content_transfer_encoding_in_sms,ua_config.add_content_transfer_encoding_in_sms,OTA and OTA BY OP,no,no,no,no,"When sending SMS, add "Content-Transfer-Encoding" header field in SIP MESSAGE.<BR>0: Disable<BR>1: Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS registration<BR>[Test Step] Make an MO SMS over IMS<BR>[Expect Result]<BR>with default value: there's no Content-Transfer-Encoding header in SIP MESSAGE<BR>config to 1 (enable): in SIP MESSAGE, Content-Transfer-Encoding header presents with value "binary"",Untested,,,,
11232,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_content_transfer_encoding_in_sms.add_content_transfer_encoding_in_sms,ua_config.add_content_transfer_encoding_in_sms.add_content_transfer_encoding_in_sms,Not Support,no,no,no,no,"[MCF]<BR>When sending SMS, add \"Content-Transfer-Encoding\" header field in SIP MESSAGE.<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
-11233,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_EMM_INDICATE_FAKE_LAI_TO_MM_TO_UPDATE_CS_LOCI,modem_sbp_config[142].SBP_EMM_INDICATE_FAKE_LAI_TO_MM_TO_UPDATE_CS_LOCI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable indicating fake LAI to MM<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time: TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+11233,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_EMM_INDICATE_FAKE_LAI_TO_MM_TO_UPDATE_CS_LOCI,modem_sbp_config[142].SBP_EMM_INDICATE_FAKE_LAI_TO_MM_TO_UPDATE_CS_LOCI,OTA and OTA BY OP,no,no,no,yes,EMM indicates fake LAI if no LAI information is included in attach accept while the inserted CMCC/CU SIM.<BR>MM will update the fake LAI to SIM to trigger the context-pop-out mechanism.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,This feature is controlled by __SBP_EMM_INDICATE_FAKE_LAI_TO_MM_TO_UPDATE_CS_LOCI__,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time: TBD<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Pass,,,,
11234,1279,NVRAM_EF_MML1_TA_SAR_TXPOWERBACKOFF_LID,1,avg_sar_check_period,avg_sar_check_period,OTA,no,no,yes,no,"[DOC,MCF]Scope is from 20 to 1000.",UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,follow SOP,Untested,,,,
11235,1279,NVRAM_EF_MML1_TA_SAR_TXPOWERBACKOFF_LID,1,avg_sar_roll_period,avg_sar_roll_period,OTA,no,no,yes,no,"[DOC,MCF]Scope is from 20 to 65533.",UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,follow SOP,Untested,,,,
11236,1279,NVRAM_EF_MML1_TA_SAR_TXPOWERBACKOFF_LID,1,avg_sar_UppThresh,tasar_lte[0~11][0~34].avg_sar_UppThresh,OTA,no,no,yes,no,"[DOC,MCF]Unit is 1/16dBm",SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,follow SOP,Untested,,,,
@@ -9868,14 +9868,14 @@
11260,57400,NVRAM_EF_NL1_SAR_ENDC_SETTING2_LID,1,scenario_setting_index,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].sar_tbl_ant_comb_node_tx1.scenario_setting_index,OTA,no,no,yes,no,SAR ENDC extension setting: TX1 scenario index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,0~499:0~499,,,NA,MD Config,Modem - Customer Requirement,,,Use MCF tool update value,Pass,,,,
11261,57400,NVRAM_EF_NL1_SAR_ENDC_SETTING2_LID,1,token,sar_2rgn_db[0~59].sar_2rgn_node[0~1].sar_tbl_ant_comb[0~29].token,OTA,no,no,yes,no,SAR ENDC extension setting: token,UNSIGNED INT,4,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,Do not recommend to modify.:Refer to SAR application note.,,,NA,MD Config,Modem - Customer Requirement,,,Use MCF tool update value,Pass,,,,
11262,57401,NVRAM_EF_NL1_SAR_SCENARIO_DB2_LID,1,sar_tbl_ant,sar_scenario_setting_db[0~249].sar_tbl_ant,OTA,no,no,yes,no,"SAR ENDC extension setting: Scenario DB setting for [250,499]",UNSIGNED CHAR,144,144,,,NR15.R3.MD700.IVT.MP1MR3.MP,,0~127:0~127,,,NA,MD Config,Modem - Customer Requirement,,,Use MCF tool update value,Pass,,,,
-11266,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_MEASUREMENT,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_MEASUREMENT,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>DR-DSDS 3.0 : Reconfig Scheme for Measurement<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,DR-DSDS by Reconfig scheme,Multiple SIM,,,SA+L or NSA+L Tput test,Untested,,,,
-11267,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_FORCE_DR30_RECONFIG_SCHEME_FOR_PAGING,modem_sbp_config[142].SBP_FORCE_DR30_RECONFIG_SCHEME_FOR_PAGING,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>DR-DSDS 3.0 : Force Reconfig Scheme for Paging<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,DR-DSDS by Reconfig scheme,Multiple SIM,,,SA+L or NSA+L Tput test,Untested,,,,
-11268,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_NWSEL_SELECT_HIGHEST_PRIORITY_EHPLMN,modem_sbp_config[142].SBP_NWSEL_SELECT_HIGHEST_PRIORITY_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE ignores the PLMN reported if it is not highest priority EHPLMN.<BR>bit 0:0:Disabled. UE does not ignore the PLMN reported if it is not highest priority EHPLMN<BR>bit 1:1:Enabled. UE ignores the PLMN reported if it is not highest priority EHPLMN",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01 : Enabled:The value for this feature is by default "Disabled".<BR>0x00 : Disabled<BR>0x01 : Enabled:By default the value for this feature option is disabled,,,,MD Config,Modem - Customer Requirement,,,Run Rakuten TCs,Pass,,,,
+11266,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_MEASUREMENT,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_MEASUREMENT,OTA,no,no,no,yes,This is to support idle mode inter-freq measurement w/o Gemini gap by reconfig scheme under supported band combination.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,DR-DSDS by Reconfig scheme,Multiple SIM,,,SA+L or NSA+L Tput test,Untested,,,,
+11267,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_FORCE_DR30_RECONFIG_SCHEME_FOR_PAGING,modem_sbp_config[142].SBP_FORCE_DR30_RECONFIG_SCHEME_FOR_PAGING,OTA,no,no,no,yes,This is only for verification purpose. Reconfig scheme will be applied for all applicable DR-DSDS scenarios.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,DR-DSDS by Reconfig scheme,Multiple SIM,,,SA+L or NSA+L Tput test,Untested,,,,
+11268,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[142].SBP_NWSEL_SELECT_HIGHEST_PRIORITY_EHPLMN,modem_sbp_config[142].SBP_NWSEL_SELECT_HIGHEST_PRIORITY_EHPLMN,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turned on, While doing full band search, NWSEL ignores the PLMN reported in PLMN found ind if it is not highest priority EHPLMN.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01 : Enabled:The value for this feature is by default "Disabled".<BR>0x00 : Disabled<BR>0x01 : Enabled:By default the value for this feature option is disabled,,,This feature is controlled by __SBP_NWSEL_SELECT_HIGHEST_PRIORITY_EHPLMN__.,MD Config,Modem - Customer Requirement,,,Run Rakuten TCs,Pass,,,,
11321,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_bye_retransmit_total_time,ua_config.sip_bye_retransmit_total_time,OTA and OTA BY OP,no,no,no,no,reduce total BYE retransmission time<BR>0:use timer F default value<BR>32000:set timer F as 32s for BYE<BR>Unit:ms<BR>,UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>32000:retransimission 32s,,,,IMS,IMS,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>1 minutes<BR>[Init]<BR>UT environment<BR>[Test Step]<BR>run ut_ua_mo_call_bye_retransmit_some_time.c<BR>[Expected Result]<BR>pass,Untested,,,,
11322,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_bye_retransmit_total_time.sip_bye_retransmit_total_time,ua_config.sip_bye_retransmit_total_time.sip_bye_retransmit_total_time,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>reduce total BYE retransmission time<BR>bit 0:0:use timer F default value<BR>bit 32000:32000:set timer F as 32s for BYE,BIT,32,,32,0,NR15.R3.MD700.IVT.MP1MR3.MP,,32000:retransimission 32s<BR>0:use default timer F,,,,IMS,IMS,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>1 minutes<BR>[Init]<BR>UT environment<BR>[Test Step]<BR>run ut_ua_mo_call_bye_retransmit_some_time.c<BR>[Expected Result]<BR>pass,Untested,,,,
-11323,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24DBM,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24DBM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable/Disable: ENDC power set to 24/default<BR>bit 0:0:Not Enabled: Default behavior<BR>bit 1:1:Enabled: ENDC less or equal 23 dbm, increase to 24",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,,R15 baseline 5G,5G Baseline,,,operator need to be verizon,Pass,,,,
-11328,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_ABORT_MANUAL_PLMN_LIST_WHEN_MT_CALL,modem_sbp_config[143].SBP_ABORT_MANUAL_PLMN_LIST_WHEN_MT_CALL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Abort Manual Searching when MT Call<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:boolean,,,No,MD Config,Modem - Customer Requirement,,,1. Initiate manual list on DUT<BR>2. Let network send MT call paging to DUT<BR>3. DUT's MD shall end manual list and report manual list fail to DUT's AP,Pass,,,,
-11329,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_PAGING,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_PAGING,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>DR-DSDS 3.0 : Reconfig Scheme for Paging<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,DR-DSDS by Reconfig scheme,Multiple SIM,,,SA+L or NSA+L Tput test,Untested,,,,
+11323,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24DBM,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24DBM,OTA and OTA BY OP,no,no,no,yes,"According to our current design in case of ENDC and dynamic power sharing, when LTE uses all of the ENDC total power then NR is dropped by setting its poweras minimum<BR>possible value -50 dbm. However in SGC lab during we found that verizon has different requirement in case of ENDC. They expect NR not to be dropped instead some minimum<BR>value considering negative and positive toleraance. When this SBP is enabled and ENDC total power is less than or equal to 23 UE will increase ENDC power to 24 dbm.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01,,,N/A,R15 baseline 5G,5G Baseline,,,operator need to be verizon,Pass,,,,
+11328,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_ABORT_MANUAL_PLMN_LIST_WHEN_MT_CALL,modem_sbp_config[143].SBP_ABORT_MANUAL_PLMN_LIST_WHEN_MT_CALL,OTA and OTA BY OP,no,no,no,yes,"If define __ABORT_MANUAL_PLMN_LIST_WHEN_MT_CALL__ flag, stopping manual PLMN list when MT call paging comes.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:boolean,,,"This feature can be controlled by __ABORT_MANUAL_PLMN_LIST_WHEN_MT_CALL__ flag.<BR> - If define __ABORT_MANUAL_PLMN_LIST_WHEN_MT_CALL__ flag, this SBP will be enable.",MD Config,Modem - Customer Requirement,,,1. Initiate manual list on DUT<BR>2. Let network send MT call paging to DUT<BR>3. DUT's MD shall end manual list and report manual list fail to DUT's AP,Pass,,,,
+11329,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_PAGING,modem_sbp_config[143].SBP_DR30_RECONFIG_SCHEME_FOR_PAGING,OTA,no,no,no,yes,This is to support idle mode PCH reception w/o Gemini gap by reconfig scheme under supported band combination.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,DR-DSDS by Reconfig scheme,Multiple SIM,,,SA+L or NSA+L Tput test,Untested,,,,
11330,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",empty_condition_tag_format,xcap_info.empty_condition_tag_format,OTA and OTA BY OP,no,no,no,no,Empty Condition Tag Format<BR>0: "Disabled"<BR>1: "Enabled"<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:"Disabled"<BR>1:"Enabled",,,,XCAP IMS-SS,XCAP,,,Can not be tested since this is a customized feature only for Softbank/Japan,Pass,,,,
11331,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",empty_condition_tag_format.empty_condition_tag_format,xcap_info.empty_condition_tag_format.empty_condition_tag_format,Not Support,no,no,no,no,Empty Condition Tag Format<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:"Disabled"<BR>1:"Enabled",,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
11346,57402,NVRAM_EF_NL1_REMAIN_HPUE_SETTING_LID,1,pi2bpsk,remain_hpue_data.pi2bpsk,OTA,no,no,no,no,,ENUM,1,,,NL1_CAP_SUPPORT,NR15.R3.MD700.IVT.MP1MR3.MP,,"NL1_CAP_SUPPORT, NL1_CAP_NOT_SUPPORT",,,,MD Config,Modem - Customer Requirement,,,UE connect to Meta tool(NVRAM editor),Pass,,,,
@@ -9889,7 +9889,7 @@
11376,57373,NVRAM_EF_NL1_OFFSETNR_LID,1,bandIdx,offset_nr_fr1_by_band[0~39].bandIdx,OTA,no,no,no,no,Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,enum: NL1_BAND_XX:band index,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11377,57373,NVRAM_EF_NL1_OFFSETNR_LID,1,offset_pwr_nr_fr1,offset_nr_fr1_by_band[0~39].offset_pwr_nr_fr1,OTA,no,no,no,no,"[MCF]the power which exceeds the p_nr_fr1 limit, unit is dB",SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,int16: 0x0000:offset of p_nr_fr1 in each band,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11381,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_GAPLESS_MEAS_FOR_INTERRAT_NR_TEST_MODE,modem_sbp_config[144].SBP_LTE_GAPLESS_MEAS_FOR_INTERRAT_NR_TEST_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>lte inter-rat NR gapless meas in test mode<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11395,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>support LTE schedulingInfoList_v12j0 in SIB1<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,LTE Protocol (R12 Baseline),4G,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11395,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,modem_sbp_config[144].SBP_LTE_SUPPORT_SCHEDULING_INFO_EXT_V12,OTA and OTA BY OP,no,no,no,yes,This is to support LTE schedulingInfoList_v12j0 in SIB1.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,LTE Protocol (R12 Baseline),4G,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
11396,61207,NVRAM_EF_PS_CONFORMANCE_TESTMODE_LID,1,data[0].val_d,data[0].val_d,Not Support,no,no,no,no,Test mode and test profile<BR>[MCF]lower byte of test profile,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
11397,61207,NVRAM_EF_PS_CONFORMANCE_TESTMODE_LID,1,data[1].val_d,data[1].val_d,Not Support,no,no,no,no,Test mode and test profile<BR>[MCF]middle byte of test profile,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
11398,61207,NVRAM_EF_PS_CONFORMANCE_TESTMODE_LID,1,data[2].val_d,data[2].val_d,Not Support,no,no,no,no,Test mode and test profile<BR>[MCF]higher byte of test profile,BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -9898,13 +9898,13 @@
11403,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",counter,nrrc_erm_param_info.counter,OTA and OTA BY OP,no,no,no,no,abnormal counts threshold,UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~10,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>enable SBP. change UE to 5g SA<BR>machine set 2 cell A, B<BR>signal of A is better than B<BR>[Test Step]<BR>Turn on UE, check UE camp on A<BR>Set machine so UE do not response to RRCConnection of UE<BR>After several RRC connection fail(T300 time out), UE shall bar cell A<BR>[Expected Result]<BR>UE change to camp another cell B",Pass,,,,
11404,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",long_monitor_duration,nrrc_erm_param_info.long_monitor_duration,OTA and OTA BY OP,no,no,no,no,monitor duration to fully alleviate,UNSIGNED INT,4,,,"0x58, 0x02, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~1000,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>enable SBP. change UE to 5g SA<BR>machine set 2 cell A, B<BR>signal of A is better than B<BR>[Test Step]<BR>Turn on UE, check UE camp on A<BR>Set machine so UE do not response to RRCConnection of UE<BR>After several RRC connection fail(T300 time out), UE shall bar cell A<BR>[Expected Result]<BR>UE change to camp another cell B",Pass,,,,
11405,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",short_monitor_duration,nrrc_erm_param_info.short_monitor_duration,OTA and OTA BY OP,no,no,no,no,abnormal monitor duration in sec,UNSIGNED INT,4,,,"0x96, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~1000,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>enable SBP. change UE to 5g SA<BR>machine set 2 cell A, B<BR>signal of A is better than B<BR>[Test Step]<BR>Turn on UE, check UE camp on A<BR>Set machine so UE do not response to RRCConnection of UE<BR>After several RRC connection fail(T300 time out), UE shall bar cell A<BR>[Expected Result]<BR>UE change to camp another cell B",Pass,,,,
-11406,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_NRRC_BAR_CELL_WITH_CONNECTION_FAILURE,modem_sbp_config[144].SBP_NRRC_BAR_CELL_WITH_CONNECTION_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Bar cell with several connection failure<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>enable SBP. change UE to 5g SA<BR>machine set 2 cell A, B<BR>signal of A is better than B<BR>[Test Step]<BR>Turn on UE, check UE camp on A<BR>Set machine so UE do not response to RRCConnection of UE<BR>After several RRC connection fail(T300 time out), UE shall bar cell A<BR>[Expected Result]<BR>UE change to camp another cell B",Pass,,,,
-11445,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,amprData,vzw_ampr_by_band[0~239].amprData,OTA,no,no,no,no,"[MCF]AMPR value, unit is 1/256 dB",UNION,200,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11446,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,aseIdx,vzw_ampr_by_band[0~239].aseIdx,OTA,no,no,no,no,[MCF]additional spectrum Emission index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11447,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,bandIdx,vzw_ampr_by_band[0~239].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11448,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,nsIdx,vzw_ampr_by_band[0~239].nsIdx,OTA,no,no,no,no,[MCF]NS index,ENUM,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-11449,57407,NVRAM_EF_NL1_VZW_MPRADJTBL_LID,1,vzw_mpr_lut_pwrcls2,vzw_mpr.vzw_mpr_lut_pwrcls2,OTA,no,no,no,no,"[MCF]Power class 2 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-11450,57407,NVRAM_EF_NL1_VZW_MPRADJTBL_LID,1,vzw_mpr_lut_pwrcls3,vzw_mpr.vzw_mpr_lut_pwrcls3,OTA,no,no,no,no,"[MCF]Power class 3 MPR value(Table6.2.2-1 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+11406,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_NRRC_BAR_CELL_WITH_CONNECTION_FAILURE,modem_sbp_config[144].SBP_NRRC_BAR_CELL_WITH_CONNECTION_FAILURE,OTA and OTA BY OP,no,no,no,yes,"When UT detect connection failure too many times within duration, UE bar the abnormal cell so UE can select another cell to camp.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0: disable<BR>1: enable,,,N/A,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR>Test Time (5)<BR>[Init]<BR>enable SBP. change UE to 5g SA<BR>machine set 2 cell A, B<BR>signal of A is better than B<BR>[Test Step]<BR>Turn on UE, check UE camp on A<BR>Set machine so UE do not response to RRCConnection of UE<BR>After several RRC connection fail(T300 time out), UE shall bar cell A<BR>[Expected Result]<BR>UE change to camp another cell B",Pass,,,,
+11445,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,amprData,vzw_ampr_by_band[0~239].amprData,Not Support,no,no,no,no,"[MCF]AMPR value, unit is 1/256 dB",UNION,200,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
+11446,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,aseIdx,vzw_ampr_by_band[0~239].aseIdx,OTA,no,no,no,no,[MCF]additional spectrum Emission index,UNSIGNED SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,0~7,,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if VzW ampr is applied as expected,Untested,,,,
+11447,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,bandIdx,vzw_ampr_by_band[0~239].bandIdx,OTA,no,no,no,no,[MCF]Band index,ENUM,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,"0~99, band index",,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if VzW ampr is applied as expected,Untested,,,,
+11448,57408,NVRAM_EF_NL1_VZW_AMPRADJTBL_LID,1,nsIdx,vzw_ampr_by_band[0~239].nsIdx,OTA,no,no,no,no,[MCF]NS index,ENUM,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,0~7,,,,R15 baseline 5G,5G Baseline,,,NVRAM modify the value and check if VzW ampr is applied as expected,Untested,,,,
+11449,57407,NVRAM_EF_NL1_VZW_MPRADJTBL_LID,1,vzw_mpr_lut_pwrcls2,vzw_mpr.vzw_mpr_lut_pwrcls2,Not Support,no,no,no,no,"[MCF]Power class 2 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
+11450,57407,NVRAM_EF_NL1_VZW_MPRADJTBL_LID,1,vzw_mpr_lut_pwrcls3,vzw_mpr.vzw_mpr_lut_pwrcls3,Not Support,no,no,no,no,"[MCF]Power class 3 MPR value(Table6.2.2-1 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
11452,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_IGNORE_NR_EF_RAT_MODE,modem_sbp_config[144].SBP_IGNORE_NR_EF_RAT_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use user rat mode setting for NR instead of SIM EF RAT setting.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
11453,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_retry_by_error_response_list,ua_config.reg_retry_by_error_response_list,OTA and OTA BY OP,no,no,no,no,"[MCF,STRING]use bitmap format to indicate the retry method when receive error response. AN:Length:128 bytes",STRING,128,128,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1:enable ims retry for huawei<BR>0:disable ims retry for huawei,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11457,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_NEED_ENABLE_EDMFAPP_6_3,modem_sbp_config[144].SBP_NEED_ENABLE_EDMFAPP_6_3,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>enable edmfapp=6,3 urc<BR>bit 0:0:Not enabled<BR>bit 1:1:enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -9912,9 +9912,9 @@
11460,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",timer_length_wait_normal_service_before_any_plmn_search,profile_emerg.timer_length_wait_normal_service_before_any_plmn_search,OTA BY OP,no,no,no,yes,timer length for waiting normal service before triggering ANY PLMN search in PLNM search ongoing case,UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0-255,,,,IMS,IMS,,,Use MCF set the Value and check if the value is set correctly in NVRAM,Untested,,,,
11461,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_sdp_ans_ack_timeout,ua_config.call_sdp_ans_ack_timeout,OTA and OTA BY OP,no,no,no,no,Configuration to stop mt call when no PRACK for 183 with SDP answer<BR>0:Disable<BR>Unit:sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:0:Disable,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
11462,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mt_processing_timeout,ua_config.mt_processing_timeout,OTA and OTA BY OP,no,no,no,no,Configuration to stop mt call when no answer after receiving the INVITE<BR>0:Disable<BR>Unit:sec<BR>,UNSIGNED SHORT,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0~255:0:Disable,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-11464,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LTE ignore IR redirection during VoLTE<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+11464,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,modem_sbp_config[144].SBP_LTE_IGNORE_IR_REDIRECT_DURING_VOLTE,OTA and OTA BY OP,no,no,no,yes,"If serving cell is bad and exist better LTE neighbor cell, LTE ignore IR redirection during VoLTE.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
11465,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rsra_status,rsra_status,OTA,no,no,no,no,[MCF][RSRA] RSRA Enable/disable,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1/0:Enable = 1<BR>Disable = 0,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)",Pass,,,,
-11466,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rs_initial_delay,rs_initial_delay,OTA,no,no,no,no,[MCF][RSRA] Initial wait time before sending RS<BR>Default value = 1,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)"<BR>,Pass,,,,
+11466,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rs_initial_delay,rs_initial_delay,OTA,no,no,no,no,[MCF][RSRA] Initial wait time before sending RS<BR>Default value = 1,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)",Pass,,,,
11467,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rs_interval,rs_interval,OTA,no,no,no,no,[MCF][RSRA] RS wait Interval<BR>Default value = 4,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,4,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)",Pass,,,,
11468,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rs_retries,rs_retries,OTA,no,no,no,no,[MCF][RSRA] RS Retry count <BR>Default value = 3,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,3,,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)",Pass,,,,
11469,3264,NVRAM_EF_RSRA_PROFILE_LID,1,rs_temp_addr,rs_temp_addr,OTA,no,no,no,no,[MCF][RSRA] Disable/Mandatory privacy extension<BR>Default value = 1 (for SBP_ID_ATT and SBP_ID_TMO_US),UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:Default value = 0 <BR>Value = 1 (for SBP_ID_ATT and SBP_ID_TMO_US),,,RSRA will work for Ipv6 or Ipv4v6,MD Config,Modem - Customer Requirement,,,"Test case 1 : IMS Registration (IPv6)<BR>Test case 2 : Browse internet (www.google.com)",Pass,,,,
@@ -9936,29 +9936,29 @@
12672,60586,NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_HPUE_LID,1,tx_power_max_value,rf_sar_tx_power_offset_by_band[0~34].table[0~11].tx_power_max_value,OTA,no,no,no,no,[MCF]unit for custom to input: 1/8 dB -> value '8' = 1 dB,CHAR,N,N,,,NR15.R3.MD700.IVT.MP1MR3.MP,,LID_BIT MULTIPLE_LID VER_LID(NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_HPUE_LID)<BR> nvram_el1_rf_sar_tx_power_offset_struct *NVRAM_EF_EL1_SAR_TX_POWER_OFFSET_HPUE_TOTAL<BR> {<BR> rf_sar_tx_power_offset_by_band:"[DOC]"{};<BR> rf_sar_tx_power_offset_by_band.band_ind:"[MCF]Do not change this setting";<BR> rf_sar_tx_power_offset_by_band.table:"[MCF]unit is 1/8 dB";<BR> rf_sar_tx_power_offset_by_band.table.tx_power_max_value:"[MCF]unit for custom to input: 1/8 dB -> value '8' = 1 dB";<BR> };,,,,MD Config,Modem - Customer Requirement,,,"LTE single B41 HPUE enable, LTE UL CA B28-41A disable HPUE, enable SAR",Pass,,,,
12688,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_CHAP_PARAM_AS_USER_SETTING,modem_sbp_config[176].SBP_CHAP_PARAM_AS_USER_SETTING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>whether CHAP parameter of username is as user setting<BR>bit 0:0:Not as user setting<BR>bit 1:1:As user setting<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR> Test Time (3minutes)<BR> [Init] follow MCF RD IT plan.<BR> [Test Step] <BR>1. Open the SBP feature;<BR>2. Configure authentication as CHAP, and set valid username and password;<BR>3. Make UE attach and establish default PDN bearer<BR> [Expected Result]<BR>The username and password sent out to NW is the same as user configured.",Untested,,,,
13339,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_EMM_ALIGN_T3402_HANDLING,modem_sbp_config[146].SBP_EMM_ALIGN_T3402_HANDLING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Align handling of timer T3402 as per 3GPP TS 24.301<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-13480,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_DISABLE_PRE_R8_FD_SCRI,modem_sbp_config[146].SBP_DISABLE_PRE_R8_FD_SCRI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable legacy (pre-R8) fast dormancy<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:0:Disabled<BR>bit 1:1:Enabled,,,,MD Config,Modem - Customer Requirement,,,use mcf OTA by OP to change this value,Untested,,,,
+13480,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_DISABLE_PRE_R8_FD_SCRI,modem_sbp_config[146].SBP_DISABLE_PRE_R8_FD_SCRI,OTA and OTA BY OP,no,no,no,yes,"To disable legacy (pre-R8) fast dormancy, not send SCRI to UMTS network.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:0:Disabled<BR>bit 1:1:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,use mcf OTA by OP to change this value,Untested,,,,
13499,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_AFR_TO_5G_FOR_SA_SILENCE_OFF,modem_sbp_config[147].SBP_AFR_TO_5G_FOR_SA_SILENCE_OFF,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>to enable enhancement for SA slience feature<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MiA (Modem intelligence agent),MiA,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
13550,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_ENABLE_SA_SLIENCE_ENH,modem_sbp_config[147].SBP_ENABLE_SA_SLIENCE_ENH,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>to enable enhancement for SA slience feature<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MiA (Modem intelligence agent),MiA,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
14021,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[145].SBP_L5_SEND_IA_MD_PREFER_AUTO,modem_sbp_config[145].SBP_L5_SEND_IA_MD_PREFER_AUTO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>L5 will send AT+EIAMDPREFER<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:0:Disable<BR>bit 1:1:Enable<BR>L5 will send AT+EIAMDPREFER<BR>bit 0:0:Disable<BR>bit 1:1:Enable,,,,PS Attach Service,MTK Proprietary,,,Test in machine N<BR>Test Time (5)<BR>[Init]<BR>1. enable this SBP<BR>[Test Step]<BR>2. check L5 sent AT+EIAMDPREFER or not<BR>[Expected Result]<BR>sent AT+EIAMDPREFER,Untested,,,,
-14022,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_VGMM_LOWER_RESEL_PRIORITY_ON_FAIL,modem_sbp_config[146].SBP_VGMM_LOWER_RESEL_PRIORITY_ON_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Lower cell reselection priority upon 5GMM procedure fail<BR>bit 0:0:Keep cell reselection priority unchanged<BR>bit 1:1:Lower cell reselection priority",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,R15 baseline 5G,5G Baseline,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
+14022,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_VGMM_LOWER_RESEL_PRIORITY_ON_FAIL,modem_sbp_config[146].SBP_VGMM_LOWER_RESEL_PRIORITY_ON_FAIL,OTA and OTA BY OP,no,no,no,yes,"This SBP enables UE to lower reselection priority of current cell, when 5GMM <BR>registration or service request procedure is failed due to following reason:<BR>- Lower layer RACH/RRC connection failure;<BR>- RRC connection Request is rejected by the gNB; or<BR>- The procedure times(i.e. T3510 or T3517 expires).<BR>It is expected that UE could attempt other NR cell if any when this SBP is enabled and <BR>procedure retry is required in the above scenarios.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,R15 baseline 5G,5G Baseline,,,Test in machine (N) <BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan <BR>[Test Step] None <BR>[Expected Result] None,Pass,,,,
14024,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_DISALLOW_IMS_TRANSFER_FOR_4G5_RESEL_WITHOUT_SNSSAI,modem_sbp_config[160].SBP_DISALLOW_IMS_TRANSFER_FOR_4G5_RESEL_WITHOUT_SNSSAI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disallow IMS PDN context transfer for 4G5 idle resel when S-NSSAI not present<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,(CT) International roaming ,OP Requirement,,,"4G ims pdn set 5G associate without S-NSSAI, then 4G5 idle reselect",Untested,,,,
14028,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[145].SBP_EONS_REPORT_NETWORK_NAME,modem_sbp_config[145].SBP_EONS_REPORT_NETWORK_NAME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>enable report network name<BR>bit 0:0:Not enabled<BR>bit 1:1:enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable report eons netowork name.<BR>1:enable report eons network name.,,,,AT&T specific Enhanced Network Selection,OP Requirement,,,Test in machine Y<BR>Test Time 10 minutes)<BR>[Init]<BR>none<BR>[Test Step]<BR>do normal MCF test<BR>[Expected Result]<BR>default value is 0.,Untested,,,,
14029,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[145].SBP_REJECT_QUERY_CONNECTED_STATE_CID,modem_sbp_config[145].SBP_REJECT_QUERY_CONNECTED_STATE_CID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reject connected CID query<BR>bit 0:0:Not enabled<BR>bit 1:1:enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
14063,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_DISABLE_NR_B1_WHEN_PEER_SIM_CONNECTED,modem_sbp_config[147].SBP_DISABLE_NR_B1_WHEN_PEER_SIM_CONNECTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>When Peer SIM is SA connected, disable reporting of NR B1 event.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Default on,,,,MD Config,Modem - Customer Requirement,,,"N+L non-data card VoLTE call off, keep connected mode",Pass,,,,
14064,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[114].SBP_VONR_RA_ERROR_ENH_CELL_BAR_TIME,modem_sbp_data_config[114].SBP_VONR_RA_ERROR_ENH_CELL_BAR_TIME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR Cell excludsion time for the enhancement",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~255,,,,MD Config,Modem - Customer Requirement,,,Configure this SBP and test NR SA connection failure scenario to see if target cell is barred according to the SBP setting.,Untested,,,,
-14066,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_VGMM_DEACT_INTERNET_PDUS_IND,modem_sbp_config[160].SBP_VGMM_DEACT_INTERNET_PDUS_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>In order to improve the success rate of 5G VONR<BR>If non-data SIM NW reconfigure internet DRB 4 times,VGMM trriger DDM deact internet PDN<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,IMS,IMS,,,SBP,Untested,,,,
+14066,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_VGMM_DEACT_INTERNET_PDUS_IND,modem_sbp_config[160].SBP_VGMM_DEACT_INTERNET_PDUS_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>In order to improve the success rate of 5G VONR<BR>If non-data SIM NW reconfigure internet DRB 4 times,VGMM trriger DDM deact internet PDN<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,SAT PDP/PDN/PDU Control,SIM,,,SBP,Untested,,,,
14068,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",endc_bands,inverted_list.plmn_group_list[0~19].endc_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of endc bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xFF:List of endc bands,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10<BR>[Init] NA<BR>[Test Step]<BR>1, modify the default value by MCF tool<BR>2, save the modification to OTA file<BR>3, push the OTA file to DUT<BR>4, check the value by NVRAM editor<BR>[Expected Result]<BR>The real value is equal to the modification value",Pass,,,,
14069,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",endc_band_num,inverted_list.plmn_group_list[0~19].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMNs in the PLMN list (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0~32:Number of endc bands related to PLMNs in the PLMN list,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10<BR>[Init] NA<BR>[Test Step]<BR>1, modify the default value by MCF tool<BR>2, save the modification to OTA file<BR>3, push the OTA file to DUT<BR>4, check the value by NVRAM editor<BR>[Expected Result]<BR>The real value is equal to the modification value",Pass,,,,
14070,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",endc_bands,positive_list.plmn_list[0~19].endc_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of endc bands,UNSIGNED SHORT,64,32,,"0x05, 0x00, 0x26, 0x00, 0x29, 0x00, 0x4d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,0x00~0xFF:List of endc bands,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10<BR>[Init] NA<BR>[Test Step]<BR>1, modify the default value by MCF tool<BR>2, save the modification to OTA file<BR>3, push the OTA file to DUT<BR>4, check the value by NVRAM editor<BR>[Expected Result]<BR>The real value is equal to the modification value",Pass,,,,
14071,2375,NVRAM_EF_MRS_NR_BAND_DISABLE_LIST_LID,"1,2",endc_band_num,positive_list.plmn_list[0~19].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x04,NR15.R3.MD700.IVT.MP1MR3.MP,,0~32:Number of endc bands related to PLMN code,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10<BR>[Init] NA<BR>[Test Step]<BR>1, modify the default value by MCF tool<BR>2, save the modification to OTA file<BR>3, push the OTA file to DUT<BR>4, check the value by NVRAM editor<BR>[Expected Result]<BR>The real value is equal to the modification value",Pass,,,,
14072,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[145].SBP_DISABLE_KDDI_LTE_ATTACH_WITH_IMS_APN,modem_sbp_config[145].SBP_DISABLE_KDDI_LTE_ATTACH_WITH_IMS_APN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable KDDI LTE attach with IMS APN<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"1. Enble the SBP feature<BR>2. Enter an invalid LTE attach configuration and oberve that NW rejects the LTE attach request from UE with an ESM cause<BR>3. Observe that the next LTE attach configuration, especially the attach APN, is the same as previous one. (APN does not changed to IMS)",Pass,,,,
-14109,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[145].SBP_ERRC_PREFER_LARGE_BW_FOR_RESEL,modem_sbp_config[145].SBP_ERRC_PREFER_LARGE_BW_FOR_RESEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reselection to Larger BW NBR when resel criteria not satisfy<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,[Rayas] IE "supportedBandwidthCombinationSetIntraENDC" report rule change,MTK Meteor,,,configure in MCF tool and push to modem,Untested,,,,
+14109,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[145].SBP_ERRC_PREFER_LARGE_BW_FOR_RESEL,modem_sbp_config[145].SBP_ERRC_PREFER_LARGE_BW_FOR_RESEL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Reselection to Larger BW NBR when resel criteria not satisfy<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,configure in MCF tool and push to modem,Untested,,,,
14113,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[108].SBP_LEGACY_FD_TIMER_SCRN_OFF,modem_sbp_data_config[108].SBP_LEGACY_FD_TIMER_SCRN_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the timer period of legacy (pre-R8) fast dormancy timer when screen off",BIT,8,,8,0x32,NR15.R3.MD700.IVT.MP1MR3.MP,,0-250,,,,MD Config,Modem - Customer Requirement,,,"use MCF OTA/OTA by OP to change the value and send AT+EFD=2,0,65535 to reset the value set by AP and send AT+EFD=4 to query if the value match what MCF set.",Untested,,,,
14114,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[109].SBP_LEGACY_FD_TIMER_SCRN_ON,modem_sbp_data_config[109].SBP_LEGACY_FD_TIMER_SCRN_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the timer period of legacy (pre-R8) fast dormancy timer when screen on",BIT,8,,8,150,NR15.R3.MD700.IVT.MP1MR3.MP,,0-150,,,,MD Config,Modem - Customer Requirement,,,"use MCF OTA/OTA by OP to change the value and send AT+EFD=2,1,65535 to reset the value set by AP and send AT+EFD=4 to query if the value match what MCF set.",Untested,,,,
14115,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[110].SBP_R8_FD_TIMER_SCRN_OFF,modem_sbp_data_config[110].SBP_R8_FD_TIMER_SCRN_OFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the timer period of R8 fast dormancy timer when screen off",BIT,8,,8,0x32,NR15.R3.MD700.IVT.MP1MR3.MP,,0-250,,,,MD Config,Modem - Customer Requirement,,,"use MCF OTA/OTA by OP to change the value and send AT+EFD=2,2,65535 to reset the value set by AP and send AT+EFD=4 to query if the value match what MCF set.",Untested,,,,
14116,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[111].SBP_R8_FD_TIMER_SCRN_ON,modem_sbp_data_config[111].SBP_R8_FD_TIMER_SCRN_ON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the timer period of R8 fast dormancy timer when screen on",BIT,8,,8,0x96,NR15.R3.MD700.IVT.MP1MR3.MP,,0-250,,,,MD Config,Modem - Customer Requirement,,,"use MCF OTA/OTA by OP to change the value and send AT+EFD=2,3,65535 to reset the value set by AP and send AT+EFD=4 to query if the value match what MCF set.",Untested,,,,
14117,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_next_pcscf_5626_403,ua_config.try_next_pcscf_5626_403,OTA and OTA BY OP,no,no,no,no,"When REG receives 403 Forbidden error response for register and not_auto_reg_403 is set to 1, if the config is set then REG will retry to register next pcscf by RFC5626 timer <BR>0: REG doesn't retry to register by RFC5626 timer.<BR>1: REG retry to register by RFC5626 timer.<BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-14118,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_ENABLE_NR_BW_SETTING_LIST_FOR_TESTSIM,modem_sbp_config[146].SBP_ENABLE_NR_BW_SETTING_LIST_FOR_TESTSIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not Trigger BW rebuild when test sim inserted.<BR>bit 0:0:Not Trigger<BR>bit 1:1:Trigger<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+14118,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_ENABLE_NR_BW_SETTING_LIST_FOR_TESTSIM,modem_sbp_config[146].SBP_ENABLE_NR_BW_SETTING_LIST_FOR_TESTSIM,OTA and OTA BY OP,no,no,no,yes,"To allow DUT perform NR Supported band "BandWidth(BW) customization" according to PLMNlists when test SIM inserted.<BR><BR>When test sim inserted, by default DUT does not to trigger NR band BWs customization. (see SBP_NR_BW_SETTING_LIST)<BR>By default, this SBP is 0, This means DUT does not allow BWs customization when test sim detected.<BR>If this SBP is 1, this means DUT allows BWs customization when test SIM detected.<BR><BR>Note: DUT always allow BWs customization when normal SIM detected.<BR>BWs customization User Manual: CS6853-H12AM-TEC-V1.0EN_Modem_Operator_Specific_Document_Modem_Design_UE_Capability_Supported_Bandwidth_Customization.docx",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,,Untested,,,,
14120,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_ALLOW_UPPER_LAYER_REQ_WHEN_T3540_RUNNING,modem_sbp_config[146].SBP_ALLOW_UPPER_LAYER_REQ_WHEN_T3540_RUNNING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Process upper layer request even T3540 is running<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,NA,Pass,,,,
14121,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_DISABLE_NR_B1_BEFORE_VOLTE_SETUP,modem_sbp_config[146].SBP_DISABLE_NR_B1_BEFORE_VOLTE_SETUP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Before VoLTE call is connected, disable reporting of NR B1 event.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00:OFF<BR>0x01:ON,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
14122,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[146].SBP_CMCC_PREFER_BAND_VIDLE,modem_sbp_config[146].SBP_CMCC_PREFER_BAND_VIDLE,OTA,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>V-IDLE SIM prefers CMCC Band3 Freq<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 1,,,,N+L DR-DSDS,Multiple SIM,,,"feature function tested by FT TC CMCC DL 1.7, and MCF is tested by MCF OTA",Untested,,,,
@@ -9973,7 +9973,7 @@
14230,57414,NVRAM_EF_NL1_TX_MAX_TRANSCEIVER_POWER_LIMITATION_LID,1,max_trans_HT,tx_max_trans_pwr_limitation_by_route[0~89].max_trans_HT,OTA,no,no,no,no,[MCF]unit is 1/32 dBm,SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
14231,57414,NVRAM_EF_NL1_TX_MAX_TRANSCEIVER_POWER_LIMITATION_LID,1,max_trans_LT,tx_max_trans_pwr_limitation_by_route[0~89].max_trans_LT,OTA,no,no,no,no,[MCF]unit is 1/32 dBm,SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
14232,57414,NVRAM_EF_NL1_TX_MAX_TRANSCEIVER_POWER_LIMITATION_LID,1,max_trans_NT,tx_max_trans_pwr_limitation_by_route[0~89].max_trans_NT,OTA,no,no,no,no,[MCF]unit is 1/32 dBm,SHORT,2,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-14235,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[115].SBP_LTE_SNIFF_IN_VIRTUAL_MODE,modem_sbp_data_config[115].SBP_LTE_SNIFF_IN_VIRTUAL_MODE,OTA and OTA BY OP,yes,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable LTE Sniffer in Virtual mode for NO service and LIMITED service<BR>bit 0:0:Sniffer disabled in virtual mode<BR>bit 1:1:Enabled in no_service cases only<BR>bit 2:2:Enabled for both no service and limited service",BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:0:Sniffer disabled in virtual mode<BR>bit 1:1:Enabled in no_service cases only<BR>bit 2:2:Enabled for both no service and limited service,,,,"Network Search Optimization - Fast Roaming, Fast List, Early Roaming Detection",MTK Proprietary,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 5min<BR>[Init]<BR>Dual SIM test.<BR>SIM-1 on LTE data transfer ongoing.<BR>SIM-2 LTE in service state.<BR>sbp data is set<BR><BR>[Test Step]<BR>Turn off LTE cell of SIM-2 card.<BR>SIM-2 enter Out of service state.<BR>Turn on cells of LTE SIM-2<BR>when sbp data is set, ERRC could trigger sniffer in GEMINI Virtual mode,<BR>[Expected Result]<BR>DUT SIM-2 could enter normal service.",Untested,,,,
+14235,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[115].SBP_LTE_SNIFF_IN_VIRTUAL_MODE,modem_sbp_data_config[115].SBP_LTE_SNIFF_IN_VIRTUAL_MODE,OTA and OTA BY OP,yes,no,no,yes,This SBP indicates which NW performs positioning.,BIT,8,,8,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0:0:Sniffer disabled in virtual mode<BR>bit 1:1:Enabled in no_service cases only<BR>bit 2:2:Enabled for both no service and limited service,,,,"Network Search Optimization - Fast Roaming, Fast List, Early Roaming Detection",MTK Proprietary,,,"Test in machine (Y/N) Y<BR>Test Time (minutes) 5min<BR>[Init]<BR>Dual SIM test.<BR>SIM-1 on LTE data transfer ongoing.<BR>SIM-2 LTE in service state.<BR>sbp data is set<BR><BR>[Test Step]<BR>Turn off LTE cell of SIM-2 card.<BR>SIM-2 enter Out of service state.<BR>Turn on cells of LTE SIM-2<BR>when sbp data is set, ERRC could trigger sniffer in GEMINI Virtual mode,<BR>[Expected Result]<BR>DUT SIM-2 could enter normal service.",Untested,,,,
16067,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[148].SBP_DISABLE_IRAT_MEAS_RPT_BEFORE_SELF_REL,modem_sbp_config[148].SBP_DISABLE_IRAT_MEAS_RPT_BEFORE_SELF_REL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable IRAT measurement before self release.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
16088,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[148].SBP_SINGLE_SS_OPERATION_ON_CSFB_WHEN_AFR_ENABLED,modem_sbp_config[148].SBP_SINGLE_SS_OPERATION_ON_CSFB_WHEN_AFR_ENABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MM shall reject the SS transaction and shall allow AFR to happen to 45G<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable : When first SS request is complete through CSFB and MM is in wait for network command state.<BR> If MM shall reject another SS transaction & shall allow AFR to happen in 45G.<BR>0:Disable :When first SS request is complete through CSFB and MM is in wait for network command state.<BR> If MM shall receive another SS transaction. MM enqueue another SS transaction in legacy RAT.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes) 10 mins <BR>[Init]<BR>Insert IDEA/Airtel SIM<BR><BR>[Test Step]<BR> - UE-A with both sim camped on Volte.<BR> - Access Supplementary service like call forwarding on sim1.<BR> - During SS query UE-B make a call to UE-A sim1<BR> - UE-A sim1 successfully receive the call.,Pass,,,,
16097,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[149].SBP_UE_CAP_MIMO_CUSTOM_BY_BC,modem_sbp_config[149].SBP_UE_CAP_MIMO_CUSTOM_BY_BC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MIMO customization by band combination<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:Japan SKU: TRUE Others: FALSE,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N): N<BR>Test Time (minutes): NA<BR>[Init]<BR>[Test Step]<BR>Need to be tested under specific operator, e.g. Docomo<BR>[Expected Result]<BR>MIMO customization is only worked on specific operator, e.g. Docomo",Pass,,,,
@@ -9996,8 +9996,8 @@
16124,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",wans_ptt_pref_setting.wfo,comm_ans_cfg.pref_cfg.wans_ptt_pref_setting.wfo,OTA and OTA BY OP,no,no,no,no,[MCF] ptt APN WIFI offload setting.<BR>wfo capability<BR>bit 0:0:not refer to WFC UI<BR>bit 15:15:refer to WFC UI<BR>,BIT,4,,4,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
16126,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",link_mtu_size,ua_config.link_mtu_size,OTA and OTA BY OP,no,no,no,no,set link layer mtu size<BR>1280:the mtu size is 1280 bytes<BR>,UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1280,,,,IMS,IMS,,,"Test in machine (N)<BR>Test Time (5 minutes)<BR> [Init] UE<BR> [Test Step]<BR>force udp, reboot ue and check register size is 1280 bytes<BR> [Expected Result]<BR>register size is 1280 bytes",Untested,,,,
16129,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_RF_MIMO_SET_CONTROL_NVRAM,modem_sbp_config[147].SBP_RF_MIMO_SET_CONTROL_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable support control to reread the MIMO cpability form the NVRAM<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-17205,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[113].SBP_NR_SA_RX_DOWNGRADE,modem_sbp_data_config[113].SBP_NR_SA_RX_DOWNGRADE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR SA RX mimo doengrades<BR>bit 0:0:Align custom file<BR>bit 1:1:NR SA RX mimo doengrades to 2x2<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-17206,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[112].SBP_NR_SA_TX_DOWNGRADE,modem_sbp_data_config[112].SBP_NR_SA_TX_DOWNGRADE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR SA TX mimo doengrades<BR>bit 0:0:Align custom file<BR>bit 1:1:NR SA TX mimo doengrades to 1x1<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+17205,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[113].SBP_NR_SA_RX_DOWNGRADE,modem_sbp_data_config[113].SBP_NR_SA_RX_DOWNGRADE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR SA RX mimo doengrades<BR>bit 0:0:Align custom file<BR>bit 1:1:NR SA RX mimo doengrades to 2x2",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init]NA<BR>[Test Step]<BR>1. Set SBP value<BR>2. reboot or flight mode on&off<BR>[Expected Result]<BR>Check if MIMO aligned with custom file (value=0) or downgrade (value = 1 or 2 or 3),Untested,,,,
+17206,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[112].SBP_NR_SA_TX_DOWNGRADE,modem_sbp_data_config[112].SBP_NR_SA_TX_DOWNGRADE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR SA TX mimo doengrades<BR>bit 0:0:Align custom file<BR>bit 1:1:NR SA TX mimo doengrades to 1x1",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init]NA<BR>[Test Step]<BR>1. Set SBP value<BR>2. reboot or flight mode on&off<BR>[Expected Result]<BR>Check if MIMO aligned with custom file (value=0) or downgrade (value = 1 or 2 or 3),Untested,,,,
17207,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_MMRFC_CUSTOMIZED_WCDMA_TXCAP_CAL_BYPASS,modem_sbp_config[147].SBP_MMRFC_CUSTOMIZED_WCDMA_TXCAP_CAL_BYPASS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>to costomize WCDMA TXCAP calibration for QUECTEL<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (5 minutes)<BR>[Init]META connect<BR>[Test Step]RF caliubration<BR>[Expected Result]Pass,Pass,,,,
17222,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_IGNORE_TEST_SIM_CHECK_FOR_CUSTOM_BAND_DISABLE_FEATURE,modem_sbp_config[179].SBP_IGNORE_TEST_SIM_CHECK_FOR_CUSTOM_BAND_DISABLE_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>SBP to control if custom band setting to be applied even for Test Sims or not<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
17232,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[147].SBP_NR_BWP_SWITCH,modem_sbp_config[147].SBP_NR_BWP_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR BWP switch on/off feature<BR>bit 0:0:NR BWP Disabled<BR>bit 1:1:NR BWP Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,Default value is on:Customer can disable /enable bwp switch feature,,,,5G option capability update,MTK Proprietary,,,"Test in machine (N)<BR>Test Time (60 minutes)<BR>[Init] NA<BR>[Test Step]<BR>Step1: Use "SBP_NR_BWP_SWITCH" default value ,default value is on ,default BWP is BWP 1# then NW trigger BWP switch to BWP 2#<BR>Step2: Set "SBP_NR_BWP_SWITCH" value as off ,default BWP is BWP 1# then NW trigger BWP switch to BWP 2#<BR>[Expected Result]<BR>Step 1 results: BWP will be switched to BWP <BR>Step 2 results: BWP will be stay at BWP1#",Untested,,,,
@@ -10021,7 +10021,7 @@
18290,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR2_FR1TDD_FR1FDD,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR2_FR1TDD_FR1FDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Apply MR(FR2 > FR1 TDD > FR1 FDD)<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,FT in US,Untested,,,,
18312,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_SKIP_BAND_PRIORITY_FOR_STORED_SCAN,modem_sbp_config[179].SBP_SKIP_BAND_PRIORITY_FOR_STORED_SCAN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore Operator band priority during LTE Frequency Scan<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,set SBP and check if apply band priority when cell search,Untested,,,,
18314,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_TRIGGER_SEARCH_IN_SHARED_NW_FOR_EMC_ATTACH_FAILURE,modem_sbp_config[179].SBP_TRIGGER_SEARCH_IN_SHARED_NW_FOR_EMC_ATTACH_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not trigger search in a shared network for emergency attach failure<BR>bit 0:0:Feature not enabled<BR>bit 1:1:Feature enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,,,,,No need and RD UT pass,Untested,,,,
-18317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_VGMM_RETRY_PAGING_WHEN_GEMINI_FAIL,modem_sbp_config[154].SBP_VGMM_RETRY_PAGING_WHEN_GEMINI_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>retry paging when paging can't get rf resource<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,D-SBP,SBP,,,,Untested,,,,
+18317,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_VGMM_RETRY_PAGING_WHEN_GEMINI_FAIL,modem_sbp_config[154].SBP_VGMM_RETRY_PAGING_WHEN_GEMINI_FAIL,OTA and OTA BY OP,no,no,no,yes,"Paging might be MT IMS CALL. If paging can't get the rf resource to perform, UE might miss this call. <BR>If this SBP is enabled, then UE will retry Paging within 3 times when paging can't get the rf resource.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,This feature will be disabled if __DISABLE_SBP_VGMM_RETRY_PAGING_WHEN_GEMINI_FAIL__ is defined.,D-SBP,SBP,,,,Untested,,,,
18321,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[148].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_DIFF,modem_sbp_data_config[148].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_DIFF,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>diff of NWSEL_PLMN_TIMER_HPLMN_REJ_14",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
18322,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[149].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_MAX,modem_sbp_data_config[149].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_MAX,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the MAX timer value of NWSEL_PLMN_TIMER_HPLMN_REJ_14",BIT,8,,8,0x0c,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
18323,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[150].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_UNIT,modem_sbp_data_config[150].SBP_HPLMN_REJ_14_EUTRAN_DISABLE_TIMER_VALUE_UNIT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>the unit of NWSEL_PLMN_TIMER_HPLMN_REJ_14<BR>bit 0:0:Timer Unit is minute<BR>bit 1:1:Timer Unit is second<BR>bit 2:2:Timer Unit is hour<BR>bit 3:3:Timer set as infinite<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
@@ -10060,9 +10060,9 @@
18738,3072,NVRAM_EF_SASE_DATA_LID,"1,2",sa_silence_result_timer,sa_silence_result_timer,OTA,no,no,no,no,"[MCF] SA silence result timer (min:2, max:255)",UNSIGNED CHAR,1,,,0x05,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
18739,3072,NVRAM_EF_SASE_DATA_LID,"1,2",sa_silence_timer,sa_silence_timer,OTA,no,no,no,no,"[MCF] SA Silence timer (min:2, max:255)",UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MiA (Modem intelligence agent),MiA,,,,Untested,,,,
18740,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",ccfc_service_class,xcap_info.ccfc_service_class,OTA and OTA BY OP,no,no,no,no,Supported CCFC Service Classes<BR>0: XCAP_CCFC_SERVICE_CLASS_NONE<BR>1: XCAP_CCFC_SERVICE_CLASS_VOICE<BR>512: XCAP_CCFC_SERVICE_CLASS_VIDEO<BR>,UNSIGNED SHORT,2,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0: XCAP_CCFC_SERVICE_CLASS_NONE:XCAP_CCFC_SERVICE_CLASS_NONE<BR>1: XCAP_CCFC_SERVICE_CLASS_VOICE:XCAP_CCFC_SERVICE_CLASS_VOICE<BR>512: XCAP_CCFC_SERVICE_CLASS_VIDEO:XCAP_CCFC_SERVICE_CLASS_VIDEO<BR>513: XCAP_CCFC_SERVICE_CLASS_VOICE + XCAP_CCFC_SERVICE_CLASS_VIDEO:XCAP_CCFC_SERVICE_CLASS_VOICE + XCAP_CCFC_SERVICE_CLASS_VIDEO,,,NA,XCAP IMS-SS,XCAP,,,"Test configuration by changing the values from 513 (default) to 1 or 512. This should lead to that only the video or audio, or both status are indicated in the +CFCC URC. This setting should apply to MMI codes or commands where service class not given.",Untested,,,,
-18744,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_URSP_PRECONF_SUPPORT,modem_sbp_config[141].SBP_URSP_PRECONF_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>URSP Pre-configuration Support<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+18744,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[141].SBP_URSP_PRECONF_SUPPORT,modem_sbp_config[141].SBP_URSP_PRECONF_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"With the feature enabled, MOD_URSP reads UE policies from the NVRAM at booting. Otherwise, MOD_URSP doesn`t.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
18747,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[174].SBP_EMM_DISABLE_DCNR_BY_ENDC_BLACKLIST,modem_sbp_config[174].SBP_EMM_DISABLE_DCNR_BY_ENDC_BLACKLIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable the feature<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-18751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[149].SBP_VGMM_REL_REG_UPDATE_IRAT_EARLY,modem_sbp_config[149].SBP_VGMM_REL_REG_UPDATE_IRAT_EARLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>VGMM release REG_UPDATE_IRAT session early<BR>bit 0:0:Don't release session early<BR>bit 1:1:Release session early",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Gemini 3.0,Multiple SIM,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+18751,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[149].SBP_VGMM_REL_REG_UPDATE_IRAT_EARLY,modem_sbp_config[149].SBP_VGMM_REL_REG_UPDATE_IRAT_EARLY,OTA and OTA BY OP,no,no,no,yes,"VGMM configures not-preemptable attribute to protect mobility registration procedure for inter-RAT change. However, when a problematic network doesn't respond to UE's REGISTRATION REQUEST, it will lead to peer SIM can't RF resource for a considerable period even there's a call to dial. If this SBP is enabled, a customized timer will be started and REG_UPDATE_IRAT session will be released when timer expires. One can configure the timer value from CUSTOM_VGMM_REG_UPDATE_IRAT_REL_TIMER_VAL_SECS in custom_vgmm_config.c.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Gemini 3.0,Multiple SIM,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
18753,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_MULTIPLE_APN_REQUIREMENT,modem_sbp_config[170].SBP_MULTIPLE_APN_REQUIREMENT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Multiple APN feature is disable.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
18786,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[155].SBP_SKIP_GLOBAL_SKU_CA_BAND_CUSTOMIZATION,modem_sbp_config[155].SBP_SKIP_GLOBAL_SKU_CA_BAND_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable Global SKU CA Band customization<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
18787,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nr_tacless_bar_cell_timer,nrrc_idle_param.nr_tacless_bar_cell_timer,OTA and OTA BY OP,no,no,no,no,Bar timer when 4G5 redirection to NR TACLESS cell.,UNSIGNED SHORT,2,,,0x12c,NR15.R3.MD700.IVT.MP1MR3.MP,,0x12c:Maximum up to 900 seconds,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
@@ -10126,7 +10126,7 @@
21240,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_node_namespace,xcap_info.remove_node_namespace,OTA and OTA BY OP,no,no,no,no,Remove Node Namespace<BR>0: "Disabled"<BR>1: "Enabled"<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,XCAP IMS-SS,XCAP,,,Test in machine Y<BR>Test Time (minutes) 5<BR>[Init]<BR>IMS registered in Softbank/Japan<BR>[Test Step]<BR>enable CFB<BR>[Expected Result]<BR>there is no namespace in "conditions" and "actions" node,Pass,,,,
21241,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",remove_node_namespace.remove_node_namespace,xcap_info.remove_node_namespace.remove_node_namespace,Not Support,no,no,no,no,remove node namespace<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0/1,,,,XCAP IMS-SS,XCAP,,,no need,Pass,,,,
21251,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[153].SBP_NR_CAP_DISABLE_RF_TRACE,modem_sbp_config[153].SBP_NR_CAP_DISABLE_RF_TRACE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable NL1 RF related trace during NR cap get NL1 capability procedure.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:0: disable (print RF capability trace)<BR>1: enable (not print RF capability trace),,,,MD Config,Modem - Customer Requirement,,,verified by SBP framework,Pass,,,,
-21296,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[152].SBP_NR_BG_SEARCH_CUSTOM_THRESHOLD,modem_sbp_config[152].SBP_NR_BG_SEARCH_CUSTOM_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NR background search check custom threshold<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+21296,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[152].SBP_NR_BG_SEARCH_CUSTOM_THRESHOLD,modem_sbp_config[152].SBP_NR_BG_SEARCH_CUSTOM_THRESHOLD,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turn ON, UE will check NR cell RSRP/RSRQ with custom RSRP/RSRQ threshold for NR background search.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
21392,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_L5_SIM_DELAY_SEND_READY_WHEN_REFRESH_ONGOING,modem_sbp_config[154].SBP_L5_SIM_DELAY_SEND_READY_WHEN_REFRESH_ONGOING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable delay send sim ready to ap/host<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:enable delay send sim ready to host<BR>0:disable delay send sim ready to host, will send inmediately when recv sim_ready_ind.",,,,MD Config,Modem - Customer Requirement,,,Test in machine: Y<BR>Test Time (minutes): 5<BR>[Init]<BR>[Test Step]<BR>insert sim and check ELT MD log<BR>[Expected Result]<BR>MBIM L5IO set the sbp to 1 and check log pass,Pass,,,,
21393,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_RAC_ALWAYS_UPDATE_SAT_LOCATION_INFO,modem_sbp_config[164].SBP_RAC_ALWAYS_UPDATE_SAT_LOCATION_INFO,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Allow rac always update SAT location info regardless of NAS state<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
21394,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[155].SBP_EPSFB_DETECT_IRHO_EXCLUDED,modem_sbp_config[155].SBP_EPSFB_DETECT_IRHO_EXCLUDED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EPSFB judgement excluding IRHO<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10135,8 +10135,8 @@
21430,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",rsrq_th,meas_mob_performance.l4c_cus_bar_th.rsrq_th,OTA,no,no,no,no,Customized RSRQ threshold for specific barring relax.,SHORT,2,,,"0xd0, 0xff,",NR15.R3.MD700.IVT.MP1MR3.MP,,short for rsrq(qdb): -180 ~ +80,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
21438,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[149].SBP_NR_DISABLE_TX_PORT_SWITCH_FOR_N77,modem_sbp_config[149].SBP_NR_DISABLE_TX_PORT_SWITCH_FOR_N77,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>report N77 tx port switch functionality in ue capability with RF capability<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"insert softbank simcard, power on and check srs tx port switch cap for N77",Untested,,,,
21439,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[171].SBP_4G5_MRU_PREFER_UL_DATA_STATUS,modem_sbp_config[171].SBP_4G5_MRU_PREFER_UL_DATA_STATUS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>prefer uplink data status in 4G5 HO MRU<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes) 5 min<BR>[Init] camp on 4G NW<BR>[Test Step]<BR>1. launch iperf UDP UL traffic<BR>2. move to 5G SA NW by triggering 4G5 IRAT HO<BR>[Expected Result]<BR>DUT set ul_data_status in MRU,Untested,,,,
-21476,59692,NVRAM_EF_L1_TAS_CUSTOM_PARAMES_LID,1,L1_TAS_CALIBRATION_RX_INIT_SETTING,L1_TAS_SB_OPTION[0~4].L1_TAS_CALIBRATION_RX_INIT_SETTING,OTA,no,no,yes,no,"[MCF, DOC]",ENUM,1,,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_RX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~2].L1_TAS_CALIBRATION_RX_INIT_SETTING : 0<BR>L1_TAS_SB_OPTION[3].L1_TAS_CALIBRATION_RX_INIT_SETTING : 1<BR>L1_TAS_SB_OPTION[4].L1_TAS_CALIBRATION_RX_INIT_SETTING : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_RX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~4].L1_TAS_CALIBRATION_RX_INIT_SETTING : 0~23,,,,Antenna Features,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
-21477,59692,NVRAM_EF_L1_TAS_CUSTOM_PARAMES_LID,1,L1_TAS_CALIBRATION_TX_INIT_SETTING,L1_TAS_SB_OPTION[0~4].L1_TAS_CALIBRATION_TX_INIT_SETTING,OTA,no,no,yes,no,"[MCF, DOC]",ENUM,1,,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_TX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~4].L1_TAS_CALIBRATION_TX_INIT_SETTING : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_TX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~4].L1_TAS_CALIBRATION_TX_INIT_SETTING : 0~23,,,,Antenna Features,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Untested,,,,
+21476,59692,NVRAM_EF_L1_TAS_CUSTOM_PARAMES_LID,1,L1_TAS_CALIBRATION_RX_INIT_SETTING,L1_TAS_SB_OPTION[0~4].L1_TAS_CALIBRATION_RX_INIT_SETTING,OTA,no,no,yes,no,"[MCF, DOC]",ENUM,1,,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_RX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~2].L1_TAS_CALIBRATION_RX_INIT_SETTING : 0<BR>L1_TAS_SB_OPTION[3].L1_TAS_CALIBRATION_RX_INIT_SETTING : 1<BR>L1_TAS_SB_OPTION[4].L1_TAS_CALIBRATION_RX_INIT_SETTING : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_RX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~4].L1_TAS_CALIBRATION_RX_INIT_SETTING : 0~23,,,,Antenna Features,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
+21477,59692,NVRAM_EF_L1_TAS_CUSTOM_PARAMES_LID,1,L1_TAS_CALIBRATION_TX_INIT_SETTING,L1_TAS_SB_OPTION[0~4].L1_TAS_CALIBRATION_TX_INIT_SETTING,OTA,no,no,yes,no,"[MCF, DOC]",ENUM,1,,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_TX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~4].L1_TAS_CALIBRATION_TX_INIT_SETTING : 0,NR15.R3.MD700.IVT.MP1MR3.MP,,L1_TAS_SB_OPTION[0].L1_TAS_CALIBRATION_TX_INIT_SETTING : 25 L1_TAS_SB_OPTION[1~4].L1_TAS_CALIBRATION_TX_INIT_SETTING : 0~23,,,,Antenna Features,RF_Proprietary,,,N<BR>5<BR>[Create OTA file]<BR>[Set OTA file]<BR>[Check if OTA is successful],Pass,,,,
21478,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[156].SBP_TRIGGER_SEARCH_WHEN_EMCS_END,modem_sbp_config[156].SBP_TRIGGER_SEARCH_WHEN_EMCS_END,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable trigger search after EMCS end.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,No need and RD UT pass,Pass,,,,
21479,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ctrl_bmp,meas_mob_performance.A3A4A5_force_th.ctrl_bmp,OTA and OTA BY OP,no,no,no,no,"0x01: disable on high speed, 0x02: enable srv_th, 0x04: enable nbr_th, 0x08: disable on test SIM",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
21480,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nbr_rsrp_th,meas_mob_performance.A3A4A5_force_th.nbr_rsrp_th,OTA and OTA BY OP,no,no,no,no,"neighbor cell rsrp threshold, unit: qdBm, range: -640~-120, disable: 0x8000.",SHORT,2,,,"0x00, 0x80,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10190,10 +10190,10 @@
21547,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR1TDD_FR1FDD,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR1TDD_FR1FDD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Apply MR(FR1 TDD > FR1 FDD)<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (60minutes)<BR>[Init] Have UE stay in FR1 & FR2 suppoted area.<BR>[Test Step] Perform data transmission.<BR>[Expected Result] UE will reported FR2 B1/B2 earlier than FR1 B1/B2 if configured.,Untested,,,,
21548,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR2_X1_FR1,modem_sbp_config[167].SBP_MEA_RPT_IRAT_NR_PRIORITY_FR2_X1_FR1,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Start FR1 B1/B2 judge after only 1 FR2 freq indicated<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (60minutes)<BR>[Init] Have UE stay in FR1 & FR2 suppoted area.<BR>[Test Step] Perform data transmission.<BR>[Expected Result] UE will reported FR2 B1/B2 earlier than FR1 B1/B2 if configured.,Untested,,,,
21554,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[117].SBP_LBS_LCSP_SUPPORT_RAT,modem_sbp_data_config[117].SBP_LBS_LCSP_SUPPORT_RAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Configuration to decide LCSP support based on the SBP value or input from AP/AGPSD<BR>bit 0:0:0: LCSP support is decided based on input from AP/AGPSD<BR>bit 1:1:1: LCSP support for 2G only<BR>bit 2:2:2: LCSP support for 3G only<BR>bit 3:3:3: LCSP support for 2G and 3G<BR>bit 4:4:4: LCSP support for 4G only<BR>bit 5:5:5: LCSP support for 2G and 4G<BR>bit 6:6:6: LCSP support for 3G and 4G<BR>bit 7:7:7: LCSP support for 2G, 3G and 4G<BR>bit 8:8:8: LCSP support for 5G only<BR>bit 9:9:9: LCSP support for 2G and 5G<BR>bit 10:10:a: LCSP support for 3G and 5G<BR>bit 11:11:b: LCSP support for 2G, 3G and 5G<BR>bit 12:12:c: LCSP support for 4G and 5G<BR>bit 13:13:d: LCSP support for 2G, 4G and 5G<BR>bit 14:14:e: LCSP support for 3G, 4G and 5G<BR>bit 15:15:f: LCSP support for 2G, 3G, 4G and 5G<BR>bit 128:128:80: LCSP support disabled for all RAT<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0: LCSP support is decided based on input from AP/AGPSD<BR>1: LCSP support for 2G only<BR>2: LCSP support for 3G only<BR>3: LCSP support for 2G and 3G<BR>4: LCSP support for 4G only<BR>5: LCSP support for 2G and 4G<BR>6: LCSP support for 3G and 4G<BR>7: LCSP support for 2G, 3G and 4G<BR>8: LCSP support for 5G only<BR>9: LCSP support for 2G and 5G<BR>10: LCSP support for 3G and 5G<BR>11: LCSP support for 2G, 3G and 5G<BR>12: LCSP support for 4G and 5G<BR>13: LCSP support for 2G, 4G and 5G<BR>14: LCSP support for 3G, 4G and 5G<BR>15: LCSP support for 2G, 3G, 4G and 5G<BR>80: LCSP support disabled for all RAT:[MCF,RUNTIME] Configuration of SBP Data<BR>Configuration to decide LCSP support based on the SBP value or input from AP/AGPSD<BR>bit 0:0:0: LCSP support is decided based on input from AP/AGPSD<BR>bit 1:1:1: LCSP support for 2G only<BR>bit 2:2:2: LCSP support for 3G only<BR>bit 3:3:3: LCSP support for 2G and 3G<BR>bit 4:4:4: LCSP support for 4G only<BR>bit 5:5:5: LCSP support for 2G and 4G<BR>bit 6:6:6: LCSP support for 3G and 4G<BR>bit 7:7:7: LCSP support for 2G, 3G and 4G<BR>bit 8:8:8: LCSP support for 5G only<BR>bit 9:9:9: LCSP support for 2G and 5G<BR>bit 10:10:a: LCSP support for 3G and 5G<BR>bit 11:11:b: LCSP support for 2G, 3G and 5G<BR>bit 12:12:c: LCSP support for 4G and 5G<BR>bit 13:13:d: LCSP support for 2G, 4G and 5G<BR>bit 14:14:e: LCSP support for 3G, 4G and 5G<BR>bit 15:15:f: LCSP support for 2G, 3G, 4G and 5G<BR>bit 128:128:80: LCSP support disabled for all RAT",,,,MD Config,Modem - Customer Requirement,,,SBP Value is to decide LCSP support based on the SBP value or input from AP/AGPSD during the run time.<BR>[Test Step]<BR>LCSP support is decided based on the value configured with respect to RAT mode.<BR>[Expected Result]<BR>MD query for LCSP support for the current RAT mode and if the SBP value configured for that RAT mode then LCSP support is available and no if it not configured.,Untested,,,,
-21559,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[155].SBP_DISCARD_PLAINTEXT_NAS_MSG_AFTER_SECURE_EXCHANGE,modem_sbp_config[155].SBP_DISCARD_PLAINTEXT_NAS_MSG_AFTER_SECURE_EXCHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Discard plaintext NAS signalling message after secure exchange established between UE and NW.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,NA,MD Config,Modem - Customer Requirement,,,verify scenarios mentioned in RDIT test,Untested,,,,
+21559,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[155].SBP_DISCARD_PLAINTEXT_NAS_MSG_AFTER_SECURE_EXCHANGE,modem_sbp_config[155].SBP_DISCARD_PLAINTEXT_NAS_MSG_AFTER_SECURE_EXCHANGE,OTA and OTA BY OP,no,no,no,yes,"As per 4.4.4.2 Once the secure exchange of NAS messages has been established, the receiving EMM or ESM entity in the UE shall not<BR>process any NAS signalling messages unless they have been successfully integrity checked by the NAS. If NAS signalling messages, <BR>having not successfully passed the integrity check, are received, then the NAS in the UE shall discard that message.<BR>As per 4.4.2.3 when UE start new signalling connection from EMM_IDLE having valid Network Security Context,<BR>secure exchange is established by replying to UE's integrity protected message with integrity and ciphered message or by initiating SMC procedure.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,N/A,MD Config,Modem - Customer Requirement,,,Send non-security protected AUTHENTICATION_REQUEST or IDENTITY_REQUEST after NAS secure exchange is established and observe UE shouldn't responds with AUTHENTICATION_RESPONSE or IDENTITY_RESPONSE.,Untested,,,,
21560,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[159].SBP_GAS_SET_CALL_FAILURE_ASSO_FOR_MT_CSFB_FAILURE,modem_sbp_config[159].SBP_GAS_SET_CALL_FAILURE_ASSO_FOR_MT_CSFB_FAILURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set the association as FAILURE if the MT CSFB call is failed<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0 and 1:0: disable<BR>1: enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
21561,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[159].SBP_RTP_SILENCE_REFRESH_NOTIFY,modem_sbp_data_config[159].SBP_RTP_SILENCE_REFRESH_NOTIFY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>control when rtp silence timeout to trigger UA refresh<BR>bit 0:0:Disabled rtp silence refresh notify<BR>bit 5:5:Enabled rtp silence refresh notify with timer = 5s",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x05:bit 5:5:Enabled rtp silence refresh notify with timer = 5s,,,,IMS,IMS,,,VoLTE/VoNR Call no dl rtp for 5s to check if send MSG_ID_LTECSR_IMS_NOTIFY_IND (msg_id=8),Untested,,,,
-21564,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[153].SBP_IMS_CONFIG_DELAY_REPORT_FOR_EPS_ONLY_NW,modem_sbp_config[153].SBP_IMS_CONFIG_DELAY_REPORT_FOR_EPS_ONLY_NW,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Delay report IMS configuration<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+21564,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[153].SBP_IMS_CONFIG_DELAY_REPORT_FOR_EPS_ONLY_NW,modem_sbp_config[153].SBP_IMS_CONFIG_DELAY_REPORT_FOR_EPS_ONLY_NW,OTA and OTA BY OP,no,no,no,yes,"If this SBP is turn ON, RAC delay report IMS configuration to NAS until IMS de-register flow finish.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
21577,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[162].SBP_EMM_ENABLE_TMSI_BASED_NRI,modem_sbp_config[162].SBP_EMM_ENABLE_TMSI_BASED_NRI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use TMSI based NRI.<BR>bit 0:0:DISABLE<BR>bit 1:1:ENABLE<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,turn on the sbp and check if TMSI based NRI container if combined attach procedure and there is valid TMSI.<BR><BR> * Some customer may use compile option __EMM_DISABLE_TMSI_BASED_NRI__ to control if NRI <BR>* container present or not,Pass,,,,
21580,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[150].SBP_DISABLE_ENDC_PREFER_WHEN_ENDC_DEACTIVATED,modem_sbp_config[150].SBP_DISABLE_ENDC_PREFER_WHEN_ENDC_DEACTIVATED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable idle ENDC prefer cell reselection when ENDC deactivated.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (N)<BR>Test Time (30minutes)<BR>[Init] let UE stay in idle<BR>[Test Step] deactivate ENDC, let UE perform idle reselection<BR>[Expected Result] UE will not prefer ENDC cell/freq when performing cell reselection",Pass,,,,
21583,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",conn_nr_afr_sinr_th,conn_nr_afr_sinr_th,OTA and OTA BY OP,no,no,no,no,[MCF]Customized NR SINR threshold for CONNECTED NR AFR triggering judgement. (qdb),SHORT,2,,,"0xdc, 0xff,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10223,10 +10223,10 @@
21643,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[151].SBP_MODEM_DISABLE_HPUE_FOR_N78,modem_sbp_config[151].SBP_MODEM_DISABLE_HPUE_FOR_N78,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set HPUE functionality for N78 in ue capability with RF capability<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,"enable/disable sbp, check nr ue cap",Untested,,,,
21644,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[151].SBP_MODEM_DISABLE_HPUE_FOR_N79,modem_sbp_config[151].SBP_MODEM_DISABLE_HPUE_FOR_N79,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set HPUE functionality for N79 in ue capability with RF capability<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,"enable/disable sbp, check nr ue cap",Untested,,,,
21645,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[155].SBP_L5SMS_3GPP2_MT_TRANSFER,modem_sbp_config[155].SBP_L5SMS_3GPP2_MT_TRANSFER,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>try perform 3gpp2->3gpp format transfer when recv 3gpp2 MT SMS<BR>bit 0:0:DISABLE<BR>bit 1:1:ENABLE",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"1. ENV prepare: 6880_EVB connect to Windows_PC(with MBIM available, with Message APP on Windows) using PCIE<BR>2. open this SBP feature(make the relate bit as 1)<BR>3. make 6880_EVB recv 3gpp2 sms(6880_EVB could not support C2K, only few operators can send 3gpp2 sms over IMS)<BR>4. check if MBIM could recv the relate MT SMS",Pass,,,,
-21648,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_VGSM_CALL_END_45G_IRAT_DEDICATE_BEARER_RELEASE,modem_sbp_config[154].SBP_VGSM_CALL_END_45G_IRAT_DEDICATE_BEARER_RELEASE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>local release dedicate bearer when call end and 45G IRAT<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+21648,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_VGSM_CALL_END_45G_IRAT_DEDICATE_BEARER_RELEASE,modem_sbp_config[154].SBP_VGSM_CALL_END_45G_IRAT_DEDICATE_BEARER_RELEASE,OTA and OTA BY OP,no,no,no,yes,"For EPSFB, if NW does not release dedicate bearer after call end, UE will judge 5G persistent PDU after AFR (4G5).<BR>With persistent PDU, if 5G NW meet system loss, NWSEL cannot search other RAT. When call already ended but dedicate<BR>bearer/flow is still alive, UE local release (not transfer) dedicate bearer/flow for 45G IRAT.",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
21649,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_VGMM_REEST_IMS_DRB_AFTER_4G5,modem_sbp_config[160].SBP_VGMM_REEST_IMS_DRB_AFTER_4G5,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>reestablish IMS DRB after 4G5<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,1. enable this SBP<BR>2. register on 4G and establish internet & IMS PDN<BR>3. trigger 4G5 IRAT and establish internet DRB during IRAT MRU<BR>4. check UE trigger another MRU after previous MRU is successful,Untested,,,,
21650,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[163].SBP_CHECK_NW_ASSIGNMENT_NR_BW_SETTING_BY_NVRAM_VALUE,modem_sbp_config[163].SBP_CHECK_NW_ASSIGNMENT_NR_BW_SETTING_BY_NVRAM_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To check network assignment NR Bandwidth setting by nvram value<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"num_of_nr_bw_setting_list_elems: {valid value:0~20};<BR>nr_bw_setting_list: {valid value: 0~20};<BR> nr_bw_setting_list[*].num_of_plmn: {valid value: 0~20};<BR> nr_bw_setting_list[*].plmn_list: {};<BR> nr_bw_setting_list[*].plmn_list[*].mcc1: {valid value: 0~9, 0XF};<BR> nr_bw_setting_list[*].plmn_list[*].mcc2: {valid value: 0~9, 0XF};<BR> nr_bw_setting_list[*].plmn_list[*].mcc3: {valid value: 0~9, 0XF};<BR> nr_bw_setting_list[*].plmn_list[*].mnc1: {valid value: 0~9, 0XF};<BR> nr_bw_setting_list[*].plmn_list[*].mnc2: {valid value: 0~9, 0XF};<BR> nr_bw_setting_list[*].plmn_list[*].mnc3: {valid value: 0~9, 0XF};<BR> nr_bw_setting_list[*].num_of_nr_band: {valid value: 0~5};<BR> nr_bw_setting_list[*].bw_per_band_setting_list: {};<BR> nr_bw_setting_list[*].bw_per_band_setting_list[*].nr_band:{valid value: 1~97, 256~261};<BR> nr_bw_setting_list[*].bw_per_band_setting_list[*].num_of_bw_scs: {valid value: 0~3};<BR> nr_bw_setting_list[*].bw_per_band_setting_list[*].bw_scs_bitmap: {};<BR> nr_bw_setting_list[*].bw_per_band_setting_list[*].bw_scs_bitmap[*].scs: {valid value: 15,30,60,120};<BR> nr_bw_setting_list[*].bw_per_band_setting_list[*].bw_scs_bitmap[*].bw_bitmap:{valid value: 0x0000~0x1FFF};",,,,MD Config,Modem - Customer Requirement,,,"Assign value to NVRAM, and check NR capability to see if related bandwidth is restricted.",Pass,,,,
-21653,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[152].SBP_VZW_5GUW_DSPL,modem_sbp_config[152].SBP_VZW_5GUW_DSPL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Verizon 5G UW icon display feature<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+21653,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[152].SBP_VZW_5GUW_DSPL,modem_sbp_config[152].SBP_VZW_5GUW_DSPL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Verizon 5G UW icon display feature<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255,,,,5G Icon Display,MTK Proprietary,,,Step1 insert VZW card<BR>Step2 power on the device<BR>Step3 AT+E5GUW,Untested,,,,
21659,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[151].SBP_NR_CA_WHITE_LIST_FALLBACK,modem_sbp_config[151].SBP_NR_CA_WHITE_LIST_FALLBACK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable band and band width class fallback matching in ENDC/SA white band combination list<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) N<BR>Test Time (minutes) 10<BR>[Init] NA<BR>[Test Step]<BR>1, modify the default value by MCF tool<BR>2, save the modification to OTA file<BR>3, push the OTA file to DUT<BR>4, check the value by NVRAM editor<BR>[Expected Result]<BR>The real value is equal to the modification value",Pass,,,,
21664,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[150].SBP_ENABLE_NR_IBLER_REPORT,modem_sbp_config[150].SBP_ENABLE_NR_IBLER_REPORT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable NR PDSCH/PUSCH Init BLER report<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
21673,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[154].SBP_FORCE_CQI,modem_sbp_config[154].SBP_FORCE_CQI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable IFORCE CQI enhancement<BR>bit 0:0:Disable FORCE_CQI feature<BR>bit 1:1:Enable FORCE_CQI feature",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0 - Disable <BR>1- Enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine by following SBP setting,Untested,,,,
@@ -10240,10 +10240,10 @@
21833,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[158].SBP_ENABLE_PINGPONG_BAR_NR,modem_sbp_config[158].SBP_ENABLE_PINGPONG_BAR_NR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable NR ping-pong-bar enhancement<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:Enable feature<BR>0x00:Disable feature,,,,MD Config,Modem - Customer Requirement,,,Customer test in machine (Y),Untested,,,,
21834,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[155].SBP_NR_TO_LTE_RESEL_CELL_THRESH,modem_sbp_data_config[155].SBP_NR_TO_LTE_RESEL_CELL_THRESH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable/Disable additional pcell/ncell custom threshold check for NR to LTE reselection<BR>bit 0:0:Disable<BR>bit 1:1:Enable custom threshold check for NR to LTE reselection<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
21835,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",custom_enh_ind_update_period,meas_mob_performance.custom_enh_ind_update_period,OTA and OTA BY OP,no,no,no,no,"set update period of MSG_ID_NL1MOB_MT_DMF_CUSTOM_ENH_IND, unit: s , range: 3~65535, disable: 0x0000",UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-21836,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ctrl_bmp,meas_mob_performance.ping_pong_parameter.ctrl_bmp,OTA and OTA BY OP,no,no,no,no,"0x01: enable pingpong_bar, 0x02: disable on test SIM",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0x03:Enable ping-pong bar feature. (Non test mode only)<BR>0x00:Disable ping-pong bar feature<BR>0x01:Enable ping-pong bar feature,,,,MD Config,Modem - Customer Requirement,,,Customer test in machine (Y),Untested,,,,
+21836,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ctrl_bmp,meas_mob_performance.ping_pong_parameter.ctrl_bmp,OTA and OTA BY OP,no,no,no,no,"0x01: enable pingpong_bar, 0x02: disable on test SIM",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0x03:Enable ping-pong bar feature. (Non test mode only)<BR>0x00:Disable ping-pong bar feature<BR>0x01:Enable ping-pong bar feature,,,,MD Config,Modem - Customer Requirement,,,Customer test in machine (Y),Pass,,,,
21837,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ping_pong_cell_bar_time,meas_mob_performance.ping_pong_parameter.ping_pong_cell_bar_time,OTA and OTA BY OP,no,no,no,no,"ping-pong cell bar time(300s), range: 60~600, disable: 0x8000.",UNSIGNED SHORT,2,,,"0x2c, 0x01,",NR15.R3.MD700.IVT.MP1MR3.MP,,60~600:range: 60~600<BR>0x8000:disable: 0x8000.,,,,MD Config,Modem - Customer Requirement,,,Customer test in machine (Y),Untested,,,,
21838,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ping_pong_cell_monitor_period,meas_mob_performance.ping_pong_parameter.ping_pong_cell_monitor_period,OTA and OTA BY OP,no,no,no,no,"ping-pong cell monitor period(20s), range: 10~30 , disable: 0x8000.",UNSIGNED SHORT,2,,,"0x14, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,"10~30:range: 10~30 , disable: 0x8000.<BR>0x8000:range: 10~30 , disable: 0x8000.",,,,MD Config,Modem - Customer Requirement,,,Customer test in machine (Y),Untested,,,,
-21839,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ping_pong_hit_count_threshold,meas_mob_performance.ping_pong_parameter.ping_pong_hit_count_threshold,OTA and OTA BY OP,no,no,no,no,"ping-pong hit count threshold, range: 2~5 , disable: 0x80.",UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,"2~5:range: 2~5 , disable: 0x80.<BR>0x80:range: 2~5 , disable: 0x80.",,,,MD Config,Modem - Customer Requirement,,,Customer test in machine (Y),Untested,,,,
+21839,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ping_pong_hit_count_threshold,meas_mob_performance.ping_pong_parameter.ping_pong_hit_count_threshold,OTA and OTA BY OP,no,no,no,no,"ping-pong hit count threshold, range: 2~5 , disable: 0x80.",UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,"2~5:range: 2~5 , disable: 0x80.<BR>0x80:range: 2~5 , disable: 0x80.",,,,MD Config,Modem - Customer Requirement,,,Customer test in machine (Y),Pass,,,,
21848,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[158].SBP_UTILIZE_MRDC_CAP_SIZE,modem_sbp_config[158].SBP_UTILIZE_MRDC_CAP_SIZE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Utilize MRDC capability size<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0<BR>bit:1,,,,MD Config,Modem - Customer Requirement,,,Test in machine: N (UT testing)<BR>Test Time: 10s<BR>[Test Step]<BR>run NRRC UE capability (Function Unit Tests) of MAIN.mscc<BR>[Expected Result] <BR>pass,Pass,,,,
21850,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[156].SBP_DOWNGRADE_MIMO_TO_2X_FOR_CUSTOMIZED_LTE_CA_COMB,modem_sbp_config[156].SBP_DOWNGRADE_MIMO_TO_2X_FOR_CUSTOMIZED_LTE_CA_COMB,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable 2 MIMO DOWNGRADE FOR FIBOCOM SOFTBANK OPERATOR<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
21899,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[161].SBP_ERRC_REDUCE_RESEL_HPRIO_THRESH,modem_sbp_config[161].SBP_ERRC_REDUCE_RESEL_HPRIO_THRESH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Lower High priority reselection threshold for ENDC cell<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10275,7 +10275,7 @@
21935,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_incall_prefer_current_rat,ipol_ans_cfg.ipol_incall_prefer_current_rat,OTA and OTA BY OP,no,no,no,no,"[MCF]Incall RAT preference<BR>ipol_incall_prefer_current_rat:8 "" <BR>0: "Disable";<BR>1: "When UE is in-call, prefer current RAT regardless of the preference setting.";<BR>2: "Enable only when the current RAT is CELL";<BR>3: "Enable only when the current RAT is WLAN";",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:When UE is in-call, prefer current RAT regardless of the preference setting.<BR>0:Disable<BR>2:Enable only when the current RAT is CELL<BR>3:Enable only when the current RAT is WLAN",,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,Test in machine (Y)<BR>Test Time (30)<BR>[Init]<BR>LTE attached<BR>Wi-Fi connected<BR>Cellular preferred<BR>[Test Step]<BR>1. Cellular signal is fair.<BR>2. Wi-Fi signal is good.<BR>3. Set up IMS PDN<BR>4. Make a call<BR>5. Wi-Fi signal becomes fair.<BR>6. Cellular signal becomes good.<BR>7. Call ends.<BR>[Expected Result]<BR>After 3. IMS PDN is over Wi-Fi.<BR>After 6. Call is still over Wi-Fi.<BR>After 7. IMS PDN hands over to cellular.,Untested,,,,
21936,2112,NVRAM_EF_IWLAN_PROFILE_LID,"1,2",ipol_incall_prefer_current_rat.ipol_incall_prefer_current_rat,ipol_ans_cfg.ipol_incall_prefer_current_rat.ipol_incall_prefer_current_rat,OTA and OTA BY OP,no,no,no,no,"[MCF]Incall RAT preference<BR><BR>bit 0:0:Disable<BR>bit 1:1:When UE is in-call, prefer current RAT regardless of the preference setting.<BR>bit 2:2:Enable only when the current RAT is CELL<BR>bit 3:3:Enable only when the current RAT is WLAN",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Disable<BR>1:When UE is in-call, prefer current RAT regardless of the preference setting.<BR>3:Enable only when the current RAT is WLAN<BR>2:Enable only when the current RAT is CELL",,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,Test in machine (Y)<BR>Test Time (30)<BR>[Init]<BR>LTE attached<BR>Wi-Fi connected<BR>Cellular preferred<BR>[Test Step]<BR>1. Cellular signal is fair.<BR>2. Wi-Fi signal is good.<BR>3. Set up IMS PDN<BR>4. Make a call<BR>5. Wi-Fi signal becomes fair.<BR>6. Cellular signal becomes good.<BR>7. Call ends.<BR>[Expected Result]<BR>After 3. IMS PDN is over Wi-Fi.<BR>After 6. Call is still over Wi-Fi.<BR>After 7. IMS PDN hands over to cellular.,Untested,,,,
21939,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[152].SBP_QUERY_MSISDN_FROM_NETWORK,modem_sbp_config[152].SBP_QUERY_MSISDN_FROM_NETWORK,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Query MSISDN from NW.<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,NA,MD Config,Modem - Customer Requirement,,,"activate PDN, issue AT+EGPCORDP=<cid>,"000E" to get MSISDN",Untested,,,,
-21943,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[156].SBP_VGMM_DO_NOT_TRIGGER_MRU_WHEN_IRAT_FAIL,modem_sbp_config[156].SBP_VGMM_DO_NOT_TRIGGER_MRU_WHEN_IRAT_FAIL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not trigger MRU when IRAT to other RAT fail<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:VGMM will not initiate mobility registration when UE performs IRAT from NR fails.<BR>0:VGMM will initiate mobility registration when UE performs IRAT from NR fails.,,,__DO_NOT_TRIGGER_MRU_WHEN_IRAT_FAIL__,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+21943,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[156].SBP_VGMM_DO_NOT_TRIGGER_MRU_WHEN_IRAT_FAIL,modem_sbp_config[156].SBP_VGMM_DO_NOT_TRIGGER_MRU_WHEN_IRAT_FAIL,OTA and OTA BY OP,no,no,no,yes,"In MTK design, we will initiate mobility registration with NW when an inter-system change was failed and UE returns to 5G.<BR>It may avoid the un-synchronize state between UE and NW.<BR>Since this behavior is not fulfilled the descriptoin in TS 24.501, we provide a option for this feature.<BR>When UE performs IRAT from NR to other RAT and SBP_VGMM_DO_NOT_TRIGGER_MRU_WHEN_IRAT_FAIL is enabled,<BR>then UE will not initiate mobility registration with NW.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:VGMM will not initiate mobility registration when UE performs IRAT from NR fails.<BR>0:VGMM will initiate mobility registration when UE performs IRAT from NR fails.,,,This SBP can be controlled by compiler option __DO_NOT_TRIGGER_MRU_WHEN_IRAT_FAIL__,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
21944,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[152].SBP_TMO_MOVIAL_SELECT_KEY_SET,modem_sbp_data_config[152].SBP_TMO_MOVIAL_SELECT_KEY_SET,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>This feature is used to control the TMO Movial RSU Key set Selection.<BR>bit 0:0:Key Set 1<BR>bit 1:1:Key Set 2<BR>bit 2:2:Key Set 3<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
21945,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[151].SBP_VZW_RSU_SELECT_KEY_TYPE,modem_sbp_data_config[151].SBP_VZW_RSU_SELECT_KEY_TYPE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>This feature is used to control the VzW RSU Key type Selection.<BR>bit 0:0:Operator Key<BR>bit 1:1:Test Key<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
21947,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[156].SBP_DISABLE_BACKOFF_TIMER_WHEN_IPV6_IN_UMTS,modem_sbp_config[156].SBP_DISABLE_BACKOFF_TIMER_WHEN_IPV6_IN_UMTS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable back-off timer when PDP activation request with IPv6 is rejected in UMTS<BR>bit 0:0:DISABLE<BR>bit 1:1:ENABLE<BR>",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
@@ -10348,8 +10348,8 @@
22574,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_EXTEND_LTE_PAGING_CYCLE,modem_sbp_config[167].SBP_EXTEND_LTE_PAGING_CYCLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Support to Extend LTE paging cycle<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:1,,,,,,,,use AT command EGMC to customize paging cycle in lte.,Untested,,,,
22618,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[157].SBP_RAC_RESTORE_PS_REG_STATE_ON_C2K_CALL_END,modem_sbp_config[157].SBP_RAC_RESTORE_PS_REG_STATE_ON_C2K_CALL_END,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Restore PS registration state after C2K call end<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
22627,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[156].SBP_ENDC_PWR_24DBM,modem_sbp_config[156].SBP_ENDC_PWR_24DBM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable/Disable: ENDC power set to 24/default<BR>bit 0:0:Not Enabled: Default behavior<BR>bit 1:1:Enabled: ENDC less or equal 23 dbm, increase to 24<BR>",BIT,1,,1,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
-22628,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_CC_HIDE_CONNECTED_NUM,modem_sbp_config[160].SBP_CC_HIDE_CONNECTED_NUM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Display the connected number received from NW<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR><BR>Test Time (minutes) : 30 secs<BR><BR>[Init] : <BR>1) Enable the compile option __CC_HIDE_CONNECTED_NUM__. Rebuild the full modem.<BR>2) Boot-up the device and UE should camp on CS domain<BR><BR>[Test Step]:<BR>Call forwarding can be done in MT side device. For e.g: When number is not reachable, re-direct my calls to some another number and making MT device as not reachable.<BR><BR>[Expected Result]<BR>connected number should not display on the screen.",Pass,,,,
-22629,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24P5DBM,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24P5DBM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable/Disable: ENDC power set to 24.5/default<BR>bit 0:0:Not Enabled: Default behavior<BR>bit 1:1:Enabled: ENDC less or equal 23 dbm, increase to 24.5<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,R15 baseline 5G,5G Baseline,,,,Untested,,,,
+22628,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_CC_HIDE_CONNECTED_NUM,modem_sbp_config[160].SBP_CC_HIDE_CONNECTED_NUM,OTA and OTA BY OP,no,no,no,yes,This feature is used to hide/display the connected number received form NW.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,This feature is controlled by __CC_HIDE_CONNECTED_NUM__.,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) : N<BR><BR>Test Time (minutes) : 30 secs<BR><BR>[Init] : <BR>1) Enable the compile option __CC_HIDE_CONNECTED_NUM__. Rebuild the full modem.<BR>2) Boot-up the device and UE should camp on CS domain<BR><BR>[Test Step]:<BR>Call forwarding can be done in MT side device. For e.g: When number is not reachable, re-direct my calls to some another number and making MT device as not reachable.<BR><BR>[Expected Result]<BR>connected number should not display on the screen.",Pass,,,,
+22629,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24P5DBM,modem_sbp_config[143].SBP_VZW_ENDC_PWR_24P5DBM,OTA and OTA BY OP,no,no,no,yes,"According to our current design in case of ENDC and dynamic power sharing, when LTE uses all of the ENDC total power then NR is dropped by setting its poweras minimum<BR>possible value -50 dbm. However in SGC lab during we found that verizon has different requirement in case of ENDC. They expect NR not to be dropped instead some minimum<BR>value considering negative and positive tolerance. When this SBP is enabled and ENDC total power is less than or equal to 23 UE will increase ENDC power to 24.5 dbm.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,R15 baseline 5G,5G Baseline,,,,Untested,,,,
22632,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[158].SBP_MRS_ENABLE_BG_SEARCH_IN_TEST_MODE,modem_sbp_data_config[158].SBP_MRS_ENABLE_BG_SEARCH_IN_TEST_MODE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Enable Background Search for test mode/test sim<BR>bit 0:0:Turn on BG_SEARCH_2G4_FDD<BR>bit 1:1:Turn on BG_SEARCH_3G4_FDD<BR>bit 2:2:Turn on BG_SEARCH_2G4_TDD<BR>bit 3:3:Turn on BG_SEARCH_3G4_TDD<BR>bit 4:4:Turn on BG_SEARCH_2G5_FDD<BR>bit 5:5:Turn on BG_SEARCH_3G5_FDD<BR>bit 6:6:Turn on BG_SEARCH_2G5_TDD<BR>bit 7:7:Turn on BG_SEARCH_3G5_TDD<BR>bit 8:8:Turn on BG_SEARCH_4G5<BR>bit 255:255:Turn off all BG SEARCH<BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
22634,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[157].SBP_UE_CAP_DSS_ADDITIONAL_CTRL,modem_sbp_config[157].SBP_UE_CAP_DSS_ADDITIONAL_CTRL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Addtional control of DSS feature<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
22635,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[157].SBP_NO_ERROR_POPUP_ON_RRC_RELEASE_FOR_USSD,modem_sbp_config[157].SBP_NO_ERROR_POPUP_ON_RRC_RELEASE_FOR_USSD,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>No error pop-up on RRC conn release by network during USSD transaction<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10422,15 +10422,15 @@
22808,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_EPBSEH_NSA_BAND_RETAIN,modem_sbp_config[165].SBP_EPBSEH_NSA_BAND_RETAIN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Allow retain of previous <nsa_band> setting when EPBSEH Set Command with [,<nsa_band] empty<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
22826,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[158].SBP_L5_SIGNAL_LOSS_DEACT_PDN,modem_sbp_config[158].SBP_L5_SIGNAL_LOSS_DEACT_PDN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>L5 will deact host pdn when receive OOS<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,Telephony Service (L5U),MTK Proprietary,,,Test in machine (Y/N)<BR>N<BR>[Init]<BR>activate one PDN<BR>[Test Step]<BR>1. move to weak signal area<BR>2. check is there PDN deactivate ind to host,Untested,,,,
22830,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_NR_CUSTOMIZED_PAGING_CYCLE,modem_sbp_config[167].SBP_NR_CUSTOMIZED_PAGING_CYCLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Customized paging cycle<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1",,,,,,,,Activate SBP. Use AT command to set customized paging cycle. Verify that the UE is able to receive paging in these customized cycles.,Untested,,,,
-22871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_SIM_ARREARAGE_MECHANISM_ENABLE,modem_sbp_config[169].SBP_SIM_ARREARAGE_MECHANISM_ENABLE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable SIM arrearage mechanism<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-22872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_TAU_ON_SET_RAT_MODE_WITH_23G_RAT_CHANGE,modem_sbp_config[160].SBP_TAU_ON_SET_RAT_MODE_WITH_23G_RAT_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Trigger TAU on SET_RAT_MODE_REQ for change in 23G rat capablity.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0 - Behavior is to trigger DETACH and ATTACH on SET_RAT_MODE_REQ for change in 23G rat<BR><BR>1:1 - TAU should be triggered instead of DETACH-ATTACH for radio capability change.,,,,R15 baseline 5G,5G Baseline,,,Test DoCoMo IO52A0102 test,Untested,,,,
-22873,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_unsupported_content_type,ua_config.ignore_unsupported_content_type,OTA and OTA BY OP,no,no,no,no,ignore the unsupported Content-Type in ACK and PRACK.<BR>0: disable<BR>1: enable,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1: enable,,,,IMS,IMS,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>1 minutes<BR>[Init]<BR>UT environment<BR>[Test Step]<BR>run ut_ua_mt_call_cmcc_01.c<BR>[Expected Result]<BR>pass,Untested,,,,
-22874,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_unsupported_content_type.ignore_unsupported_content_type,ua_config.ignore_unsupported_content_type.ignore_unsupported_content_type,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>ignore the unsupported Content-Type in ACK and PRACK.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>1 minutes<BR>[Init]<BR>UT environment<BR>[Test Step]<BR>run ut_ua_mt_call_cmcc_01.c<BR>[Expected Result]<BR>pass,Untested,,,,
+22871,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_SIM_ARREARAGE_MECHANISM_ENABLE,modem_sbp_config[169].SBP_SIM_ARREARAGE_MECHANISM_ENABLE,OTA and OTA BY OP,no,no,no,yes,This SBP is used to enable or disable the SIM arrearage mechanism.,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+22872,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[160].SBP_TAU_ON_SET_RAT_MODE_WITH_23G_RAT_CHANGE,modem_sbp_config[160].SBP_TAU_ON_SET_RAT_MODE_WITH_23G_RAT_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Trigger TAU on SET_RAT_MODE_REQ for change in 23G rat capablity.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0 - Behavior is to trigger DETACH and ATTACH on SET_RAT_MODE_REQ for change in 23G rat<BR><BR>1:1 - TAU should be triggered instead of DETACH-ATTACH for radio capability change.,,,,R15 baseline 5G,5G Baseline,,,Test DoCoMo IO52A0102 test,Pass,,,,
+22873,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_unsupported_content_type,ua_config.ignore_unsupported_content_type,OTA and OTA BY OP,no,no,no,no,ignore the unsupported Content-Type in ACK and PRACK.<BR>0: disable<BR>1: enable,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0: disable<BR>1: enable,,,,IMS,IMS,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>1 minutes<BR>[Init]<BR>UT environment<BR>[Test Step]<BR>run ut_ua_mt_call_cmcc_01.c<BR>[Expected Result]<BR>pass,Untested,,,,
+22874,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_unsupported_content_type.ignore_unsupported_content_type,ua_config.ignore_unsupported_content_type.ignore_unsupported_content_type,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>ignore the unsupported Content-Type in ACK and PRACK.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enable,,,,IMS,IMS,,,Test in machine (Y/N)<BR>N<BR>Test Time (minutes)<BR>1 minutes<BR>[Init]<BR>UT environment<BR>[Test Step]<BR>run ut_ua_mt_call_cmcc_01.c<BR>[Expected Result]<BR>pass,Untested,,,,
22881,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nw_reject_with_long_wait_time_bar_time,nrrc_erm_param_info.nw_reject_with_long_wait_time_bar_time,OTA and OTA BY OP,no,no,no,no,Bar time for NW reject with a long wait time,UNSIGNED INT,4,,,"0x2c, 0x01, 0x00, 0x00,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
22882,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nw_reject_with_long_wait_time_counter,nrrc_erm_param_info.nw_reject_with_long_wait_time_counter,OTA and OTA BY OP,no,no,no,no,Counter for NW reject with a long wait time,UNSIGNED CHAR,1,,,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
22883,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nw_reject_with_long_wait_time_monitoring_time,nrrc_erm_param_info.nw_reject_with_long_wait_time_monitoring_time,OTA and OTA BY OP,no,no,no,no,Monitoring time for NW reject with a long wait time,UNSIGNED CHAR,1,,,0x3c,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
22884,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",nw_reject_with_long_wait_time_threshold,nrrc_erm_param_info.nw_reject_with_long_wait_time_threshold,OTA and OTA BY OP,no,no,no,no,Threshold for NW reject with a long wait time,UNSIGNED CHAR,1,,,0x10,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-22915,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_NRRC_MEAS_REEST_UPON_CHECK_IE_ERROR,modem_sbp_config[169].SBP_NRRC_MEAS_REEST_UPON_CHECK_IE_ERROR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NRRC MEAS REEST UPON CHECK IE ERROR<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
+22915,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_NRRC_MEAS_REEST_UPON_CHECK_IE_ERROR,modem_sbp_config[169].SBP_NRRC_MEAS_REEST_UPON_CHECK_IE_ERROR,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
22974,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_if_match_header,xcap_info.support_if_match_header,OTA and OTA BY OP,no,no,no,no,Support If-Match Header<BR>0:If-Match header not supported<BR>1:If-Match handled on service level<BR>2:If-Match handled on simservs level<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,00~02:0:If-Match header not supported<BR>1:If-Match handled on service level<BR>2:If-Match handled on simservs level,,,,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] Follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
22975,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",support_if_match_header.support_if_match_header,xcap_info.support_if_match_header.support_if_match_header,Not Support,no,no,no,no,Support If-Match Header<BR><BR>bit 0:0:If-Match header not supported<BR>bit 1:1:If-Match handled on service level<BR>bit 2:2:If-Match handled on simservs level<BR>,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
22982,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_add_plus_one,ua_config.video_add_plus_one,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
@@ -10457,7 +10457,7 @@
23028,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",sinr_th_for_offset,meas_mob_performance.A3A4A5_prefer_cell.sinr_th_for_offset,OTA and OTA BY OP,no,no,no,no,"neighbor cell sinr threshold, unit: qdB , range: -100~160, disable: 0x8000",SHORT,2,,,"0x00, 0x80,",NR15.R3.MD700.IVT.MP1MR3.MP,,"unit: qdB , range: -100~160, disable: 0x8000",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
23029,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",offset_penalty,nrrc_idle_param.nrrc_idle_custom_redir_param_info.offset_penalty,OTA and OTA BY OP,no,no,no,no,offset penalty value when intra-NR redirection failed in subway scenario,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"(0,15]",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
23030,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",offset_time,nrrc_idle_param.nrrc_idle_custom_redir_param_info.offset_time,OTA and OTA BY OP,no,no,no,no,offset penalty time when intra-NR redirection failed in subway scenario,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"(0,300]",,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-23031,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[163].SBP_CUSTOM_SUBWAY_REDIR_CONTROL,modem_sbp_config[163].SBP_CUSTOM_SUBWAY_REDIR_CONTROL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable customize intra-NR redirection failed control<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+23031,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[163].SBP_CUSTOM_SUBWAY_REDIR_CONTROL,modem_sbp_config[163].SBP_CUSTOM_SUBWAY_REDIR_CONTROL,OTA and OTA BY OP,no,no,no,yes,Customer requirement for intra-NR redirection failed control for subway scanario.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
23032,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_NR_CUSTOM_PREFER_CELL_MEAS_RPT,modem_sbp_config[167].SBP_NR_CUSTOM_PREFER_CELL_MEAS_RPT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable measReport for prefer cell by custom prefer cell list enhancement<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
23039,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pref_cell_disable_timer_val,pref_cell_disable_timer_val,OTA and OTA BY OP,no,no,no,no,[MCF]Customized NR neighbor cell reporting disable time (Sec),UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23040,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",rsrp,pref_list_nbr_cell_threshold.rsrp,OTA and OTA BY OP,no,no,no,no,[MCF]Customize preference list serving cell RSRP threshold setting (qdbm),SHORT,2,,,"0xff, 0x7f,",NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10469,14 +10469,14 @@
23046,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pref_nbr_cell_offset_rsrp,pref_nbr_cell_offset_rsrp,OTA and OTA BY OP,no,no,no,no,[MCF]Customized NR neighbor cell RSRP added offset (qdbm),UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23047,60929,NVRAM_EF_ERRC_PERFORMANCE_PARA_LID,"1,2",pref_nbr_cell_offset_rsrq,pref_nbr_cell_offset_rsrq,OTA and OTA BY OP,no,no,no,no,[MCF]Customized NR neighbor cell RSRQ added offset (qdb),UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23048,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_ERRC_CUSTOM_PREFER_CELL_MEAS_RPT,modem_sbp_config[167].SBP_ERRC_CUSTOM_PREFER_CELL_MEAS_RPT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable measReport for prefer cell by custom prefer cell list enhancement<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-23049,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[163].SBP_INTER_BAND_CONTIGUOUS_MRDC_SUPPORT,modem_sbp_config[163].SBP_INTER_BAND_CONTIGUOUS_MRDC_SUPPORT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable the feature.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,InterBandContiguousMRDC (0/1):New IE for capability reporting,,,,5G option capability update,MTK Proprietary,,,"If SBP is ON, then InterBandContiguous IE would be support",Untested,,,,
+23049,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[163].SBP_INTER_BAND_CONTIGUOUS_MRDC_SUPPORT,modem_sbp_config[163].SBP_INTER_BAND_CONTIGUOUS_MRDC_SUPPORT,OTA and OTA BY OP,no,no,no,yes,Report interBandContiguousMRDC as support in UE Capability.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,InterBandContiguousMRDC (0/1):New IE for capability reporting,,,N/A,5G option capability update,MTK Proprietary,,,"If SBP is ON, then InterBandContiguous IE would be support",Untested,,,,
23052,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",is_ims_retry_watchdog_timer,imc_config.is_ims_retry_watchdog_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable,,,,,,,,,Untested,,,,
23055,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[161].SBP_LBS_CTRL_LPP_ABORT_FOR_INCOMPLETE_ASSIST_DATA_PROC,modem_sbp_config[161].SBP_LBS_CTRL_LPP_ABORT_FOR_INCOMPLETE_ASSIST_DATA_PROC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enabled LPP Abort will be sent for incomplete transaction of assistance data transfer procedure<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,Bit: 0/1:"0" LPP Abort will not be sent for incomplete transaction assistance data transfer procedure<BR>SBP_LBS_CTRL_LPP_ABORT_FOR_INCOMPLETE_ASSIST_DATA_PROC = "1" LPP Abort will be sent for incomplete transaction of assistance data transfer procedure.<BR>SBP_LBS_CTRL_LPP_ABORT_FOR_INCOMPLETE_ASSIST_DATA_PROC = "1" LPP Abort will be sent for incomplete transaction of assistance data transfer procedure.,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] LPP Test case<BR>[Test Step] NW must trigger control plane LPP session<BR>[Expected Result] UE must avoid sending LPP Abort for incomplete transaction after sending location information,Pass,,,,
23060,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tcp_keepalive_interval,ua_config.tcp_keepalive_interval,OTA and OTA BY OP,no,no,no,no,Configuration for changing the interval of sending the TCP keepalive packets to server if no date is sent on TCP client connection<BR>Default: 7200000<BR>0: disable TCP keepalive<BR>Unit: ms,UNSIGNED INT,4,,,7200000,NR15.R3.MD700.IVT.MP1MR3.MP,,0~4294967295:Configuration for changing the interval of sending the TCP keepalive packets to server if no date is sent on TCP client connection,,,,IMS,IMS,,,"keep no data on the TCP connection for a long time after IMS registration done , then check if UE send keep alive packet to NW",Untested,,,,
23091,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[162].SBP_MM_TRY_EAFR_UPON_T3330_TIMER_EXPIRY,modem_sbp_config[162].SBP_MM_TRY_EAFR_UPON_T3330_TIMER_EXPIRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>MM try eAFR upon T3330 timer expiry<BR>bit 0:0:MM behavior shall be aligned with 3GPP 24.008, i.e MM shall initiate RAU again upon T3330 timer expiry<BR>bit 1:1:In 3G On T3330 timer expiry, if AFR is possible and no CS procedures are on-going MM will abort the on-going RAU procedure and shall perform EAFR procedure to release the RRC connection. On RRC connection is released, UE shall attempt to fast return to higher RAT.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:In 3G On T3330 timer expiry, if AFR is possible and no CS procedures are on-going MM will abort the on-going RAU procedure and shall perform EAFR procedure to release the RRC connection. On RRC connection is released, UE shall attempt to fast return to higher RAT.<BR><BR>0x0:MM behavior shall be aligned with 3GPP 24.008, i.e MM shall initiate RAU again upon T3330 timer expiry",,,__MM_TRY_EAFR_UPON_T3330_TIMER_EXPIRY__,MD Config,Modem - Customer Requirement,,,"Test in machine (Y/N) y<BR> Test Time (minutes) 10min<BR> [Init]DUT boot up<BR> Enable <BR> SBP_MM_TRY_EAFR_UPON_T3330_TIMER_EXPIRY<BR> [Test Step]<BR>->Register successfully on LTE<BR>->CFSB to UMTS by triggering speech call<BR>->Allow Call to be connected successfully, Network/machine should not respond for the PS procedure<BR>->Disconnect call and release connection<BR>[Expected Result]<BR>T3330 timer expiry and EAFR need to perform.",Pass,,,,
23105,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",normal_call_csfb_failure_code_table_after_tone,ua_config.normal_call_csfb_failure_code_table_after_tone,OTA and OTA BY OP,no,no,no,no,Define the failure code table that is for OEM to point out which failurecodes need CSFB after ringing tone in normal call.,STRING,64,64,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,""403,404,...":List SIP failure codes which need CSFB when it was received after ring tone.",,,,IMS,IMS,,,"Test in machine (Y)<BR><BR>Test Time (1 minute)<BR><BR>[Init]<BR>1. input *#*#3646633#*#* Enter EM mode<BR>2. enter Connectivity => CDS Information => Radio Information => (phone1/phone2), and modify the value as follows:<BR>AT+ECFGSET="normal_call_csfb_failure_code_table_after_tone","403"<BR>3. click set and disable/enable IMS<BR><BR>[Test Step]<BR>1. DUT have a volte call.<BR>2. 183 and 180 received from NW.<BR>3. 403 received from NW.<BR>4. DUT is expect to CSFB and retry in CS domain.<BR><BR>[Expected Result]<BR>When received 403 , DUT is expected to retry in CS domain",Untested,,,,
-23120,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_REPORT_AUTHENTICATION_REJECT_CAUSE,modem_sbp_config[164].SBP_REPORT_AUTHENTICATION_REJECT_CAUSE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Report Authentication Reject to AP<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-23126,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_SET_CELL_POWER_THRESH_FOR_HST_ENHANCE,modem_sbp_config[164].SBP_SET_CELL_POWER_THRESH_FOR_HST_ENHANCE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>enable cell power threshold setting for HST scanario<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+23120,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_REPORT_AUTHENTICATION_REJECT_CAUSE,modem_sbp_config[164].SBP_REPORT_AUTHENTICATION_REJECT_CAUSE,OTA and OTA BY OP,no,no,no,yes,"When DUT receives authentication reject, this SBP decides if the authentication reject needs to be reported to AP in +EREG/+EGREG URC",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
+23126,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[164].SBP_SET_CELL_POWER_THRESH_FOR_HST_ENHANCE,modem_sbp_config[164].SBP_SET_CELL_POWER_THRESH_FOR_HST_ENHANCE,OTA and OTA BY OP,no,no,no,yes,Customer requirement for cell power threshold setting for HST scanario.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
23129,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nr_treg,ua_config.nr_treg,OTA and OTA BY OP,no,no,no,no,set NR treg timer when attach NR,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,5:start 5s nr treg timer<BR>0:not start nr treg timer,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time ( 1 minutes)<BR>[Init] UT environment<BR>[Test Step] run test case ut_ua_registration_nr_treg_timeout_during_init_reg.c<BR>[Expected Result] test case pass,Untested,,,,
23131,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",when_start_epsfb_timer,ua_config.when_start_epsfb_timer,OTA and OTA BY OP,no,no,no,no,Bitmask for controlling the timing to start "epsfb_timer"<BR>b0: start epsfb_timer when sending/receiving initial response<BR>b1: start epsfb_timer when sending/receiving initial SDP answer<BR>b2: reserved<BR>,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~3,,,,IMS,IMS,,,VZ_TC_IMSVOIP_3934<BR><BR>(but the SDP offer of delay media should be in 183 sent by UE according to the requirement),Untested,,,,
23132,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",when_start_epsfb_timer.b0,ua_config.when_start_epsfb_timer.b0,OTA and OTA BY OP,no,no,no,no,[MCF]Bitmask for controlling the timing to start \"epsfb_timer\".<BR>start epsfb_timer when sending/receiving initial 1xx response,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,N/A for redundant item,,,,IMS,IMS,,,N/A for redundant item,Untested,,,,
@@ -10492,9 +10492,9 @@
23143,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stir_shaken_for_privacy,ua_config.stir_shaken_for_privacy,OTA and OTA BY OP,no,no,no,no,"This is a feature in TS 24.229 5.1.2A.2<BR><BR>receives initial INVITE request for a dialog containing a P-Asserted-Identity header field or a From header field with a "verstat" tel URI parameter in a tel URI or a SIP URI with a user=phone parameter.<BR><BR>0: Disable<BR><BR>1: Enable, we will send the report to AP when it is anonymous cases",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Enable, we will send the report to AP when it is anonymous cases<BR>0:Disable",,,,IMS,IMS,,,[Init]IMS Register over LTE<BR>[Test Step] Receive SIP INVITE contains "verstat=No-TN-Validation" in From header (MT call)<BR>[Expected Result]<BR>p_assert_uri in ECPI contains "verstat=No-TN-Validation"<BR><BR>[Init]IMS Register over LTE<BR>[Test Step] Receive SIP INVITE contains "verstat=TN-Validation-Passed" in From header (MT call)<BR>[Expected Result]<BR>p_assert_uri in ECPI contains "verstat=TN-Validation-Passed"<BR><BR>[Init]IMS Register over LTE<BR>[Test Step] Receive SIP INVITE contains "verstat=TN-Validation-Failed" in From header (MT call)<BR>[Expected Result]<BR>p_assert_uri in ECPI contains "verstat=TN-Validation-Failed",Untested,,,,
23144,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stir_shaken_for_privacy.stir_shaken_for_privacy,ua_config.stir_shaken_for_privacy.stir_shaken_for_privacy,Not Support,no,no,no,no,[MCF]<BR>request STIR SHAKEN on privacy call (anonymous call)<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
23145,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_MODIFY_NON_DATA_SIM_GMM_ATTACH_PRIORITY_TO_LOW_MSPM_PRIORITY,modem_sbp_config[165].SBP_MODIFY_NON_DATA_SIM_GMM_ATTACH_PRIORITY_TO_LOW_MSPM_PRIORITY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Perform GMM Attach with MSPM priority of MSPM_GMM_ATTACH_NON_DATA_SIM on non data SIM<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 5<BR>[Init]<BR>[Test Step]<BR>Enable SBP and trigger GMM Attach on non data SIM while some peer data SIM procedures are ongoing<BR>[Expected Result]<BR>No interruptions to data SIM,Pass,,,,
-23146,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",dont_stop_wg_cs_timer_on_service_update,profile_normal.dont_stop_wg_cs_timer_on_service_update,OTA BY OP,no,no,no,yes,Don't stop WG_CS timer on Service update,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"1) Enable dont_stop_wg_cs_timer_on_service_update NVRAM parameter in ims_nvram_def.c(default value) or in sbp_nvram_vdm_config.c file(operator specific change)<BR><BR>2) Execute normal call<BR>3) CSFB should happen and UE send extended_service_request to NW<BR>4) NW rejects the request with T3442 timer value more than 10 seconds.<BR>5) Call should be success.<BR>[[Recommend to Apply this Important Patch with Priority]]<BR>No, it is a normal patch.",Untested,,,,
+23146,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",dont_stop_wg_cs_timer_on_service_update,profile_normal.dont_stop_wg_cs_timer_on_service_update,OTA BY OP,no,no,no,yes,Don't stop WG_CS timer on Service update,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,"1) Enable dont_stop_wg_cs_timer_on_service_update NVRAM parameter in ims_nvram_def.c(default value) or in sbp_nvram_vdm_config.c file(operator specific change)<BR><BR>2) Execute normal call<BR>3) CSFB should happen and UE send extended_service_request to NW<BR>4) NW rejects the request with T3442 timer value more than 10 seconds.<BR>5) Call should be success.<BR>[[Recommend to Apply this Important Patch with Priority]]<BR>No, it is a normal patch.",Pass,,,,
23147,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[174].SBP_EMM_CARRY_EPSB_ON_ANY_5G4_TAU,modem_sbp_config[174].SBP_EMM_CARRY_EPSB_ON_ANY_5G4_TAU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>EMM carries EPS bearer status context IE in TAU on any SA to LTE IRAT TAU<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N)<BR> Test Time (minutes)<BR> [Init] <BR> > Set SBP_EMM_CARRY_EPSB_ON_ANY_5G4_TAU to 1<BR> > UE registered on 5G<BR> [Test Step]<BR> 1. Perform EPSFB call.<BR> 2. NW send MobilityFromNRCommand to handover UE from NR to LTE<BR> 3. UE sent EMM TAU-REQUEST to NW.<BR><BR> [Expected Result]<BR> The TAU-REQUEST should contain EPS bearer context status IE.,Untested,,,,
-23159,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_NR_RE_EST_SEARCH_OPT_STRONGEST_ONLY,modem_sbp_config[165].SBP_NR_RE_EST_SEARCH_OPT_STRONGEST_ONLY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Attempt to camp only to the strongest cell within a frequency in NR RRC connection re-establishment.<BR>bit 0:0:Enhancement disabled<BR>bit 1:1:Enhancement enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+23159,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_NR_RE_EST_SEARCH_OPT_STRONGEST_ONLY,modem_sbp_config[165].SBP_NR_RE_EST_SEARCH_OPT_STRONGEST_ONLY,OTA and OTA BY OP,no,no,no,yes,"When this optimization is enabled, UE will only attempt to camp on to the strongest cell<BR>within a frequency in cell selection for RRC connection re-establishment.<BR>When this optimization is disabled, UE will attempt to camp on to the any found cell<BR>in cell selection for RRC connection re-establishment.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,N/A,,,,,,Untested,,,,
23185,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",game_nbr_bad_rsrp_th,meas_mob_performance.game_nbr_bad_rsrp_th,OTA and OTA BY OP,no,no,no,no,"If measured cells' (including serving) RSRP are all below the threshold set as game_nbr_bad_rsrp_th, then no to use HE3.0 to prevent from HO to worse cell.",SHORT,2,,,"0x34, 0xfe,",NR15.R3.MD700.IVT.MP1MR3.MP,,-460,,,,MD Config,Modem - Customer Requirement,,,by SBP framework,Untested,,,,
23189,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[181].SBP_HIGH_PRIORITY_CELL,modem_sbp_config[181].SBP_HIGH_PRIORITY_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable cell priority RSRP offset for NR, LTE<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23197,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_NR_BAR_CELL_NW_REJECT_WITH_LONG_WAIT_TIME,modem_sbp_config[170].SBP_NR_BAR_CELL_NW_REJECT_WITH_LONG_WAIT_TIME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Set NR serving cell as barred, if RRC conn. est. is rejected by NW with a long wait time.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10551,15 +10551,15 @@
23716,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[166].SBP_NR_PARTIAL_BAND_USE_NVRAM,modem_sbp_config[166].SBP_NR_PARTIAL_BAND_USE_NVRAM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use NVRAM to config NR partial band under MCC<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
23723,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[171].SBP_L5_SIM_REPORT_REQUESTED_PIN_TYPE_WHEN_BLOCKED,modem_sbp_config[171].SBP_L5_SIM_REPORT_REQUESTED_PIN_TYPE_WHEN_BLOCKED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>report pin type is the same as in the request and remaining_attempts is 0 when verify pin fail max times and blocked<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"int:0:1.controlled by compiler option __L5_SIM_REPORT_REQUESTED_PIN_TYPE_WHEN_BLOCKED__, if this option is included, the sbp is on, otherwise is off.<BR>2.when sbp on, modem will return pin type as requested and remaining_attempts 0 when verify pin fail max times and blocked.<BR>3.when sbp off, modem will return puk type of requested and remaining_attempts of puk when verify pin fail max times and blocked.<BR>int:1:1.sbp feature is on for OPPO AA292(90213)<BR>2.controlled by compiler option __L5_SIM_REPORT_REQUESTED_PIN_TYPE_WHEN_BLOCKED__, if this option is included, the sbp is on, otherwise is off.<BR>2.modem will return pin type as requested and remaining_attempts 0 when verify pin fail max times and blocked.",,,,Telephony Service (L5U),MTK Proprietary,,,"The sbp feature is on during below branchs/projects, and on other gen98 branch is off.<BR>//VMOLYM/BRANCHES_NR16/NR16.R1.MP1MP2.TC16.PR2.SP/<BR>OPPO_RM_K6895V1_64(NLWCG_6195).mak<BR>OPPO_RM_K6895V1_64(NLWCG_6195_CUSTOM).mak<BR>OPPO_RM_K6895V1_64(NLWCG_6195_USER).mak<BR><BR>Test in machine (Y/N):N<BR>Test Time (minutes): 3<BR>[Init]<BR>insert sim card with pin enabled.<BR>[Test Step]<BR>1.verify pin or change pin fail max times and blocked<BR>2.verify puk<BR>[Expected Result]<BR>1.when sbp on, modem will return pin type as pin and remaining_attemps 0<BR>when sbp off, modem will return puk type of pin and remaining_attemps of puk<BR>2.verify puk successfully",Untested,,,,
23725,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[172].SBP_NOT_RETRY_SKIP_ABNORMAL_PLMN,modem_sbp_config[172].SBP_NOT_RETRY_SKIP_ABNORMAL_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not to search abnormal PLMN again<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,IMS,IMS,,,"Test in machine (Y)<BR>Test Time (>20 minutes)<BR>[Init]<BR>Precondition: There is underlying home LTE network, 3 PCSCFs<BR>[Test Step]<BR>1. UE successfully 5GS attach to the NW.<BR>2. The SS waits for the PDN Connectivity Request and activates the default bearer for IMS.<BR>3. The SS waits for the Register message from the DUT and responds with Error code 305. IMS registration to PCSCF 1 fails<BR>4. UE retries on PCSCF2 and fails with same error 305<BR>5. UE retries on PCSCF3 and fails with same error 305<BR>6. UE does not send any REGISTER message in the next 120 sec<BR>7. RRC Connection is released on 5G cell<BR>8. UE is power cycled<BR>9. UE sends ATTACH Request on 5G cell and gets Attach Reject. This is repeated for the next 4 iterations as T3402 timer is invoked at UE if the Attach attempt count is 5<BR>10. RRC connection is released on 5G cell <BR>11. 5G Cell power is reduced<BR>12. UE reselects to LTE Cell and goes to Idle mode<BR>13. 5G cell power becomes better<BR>14. After 12 min of wait time (T3402 timer expiry) , UE registers on 5G Cell <BR>15. Attach is complete with 5GS only attach mode<BR>16. UE successfully REGISTERS on IMS<BR>17. MO call is initiated<BR>18. Call is established and releases<BR>19. RRC Connection is released<BR>[Expected Result]<BR>Finish the test",Untested,,,,
-23728,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_GMSS_TRIGGER_INCREMENTAL_MPSR,modem_sbp_config[165].SBP_GMSS_TRIGGER_INCREMENTAL_MPSR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Trigger Incremental MPSR<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:On<BR>0x00:Off,,,,MD Config,Modem - Customer Requirement,,,[Prerequisite] UE with CT SIM card inserted<BR>[Operation steps] Enter an area with 1x coverage but no LTE/NR coverage.<BR>[Expected results] Check if power consumption is reduced due to incremental increase in MPSR_TIMER value.,Pass,,,,
+23728,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[165].SBP_GMSS_TRIGGER_INCREMENTAL_MPSR,modem_sbp_config[165].SBP_GMSS_TRIGGER_INCREMENTAL_MPSR,OTA and OTA BY OP,no,no,no,yes,"Customer wants a method to change the MPSR timer duration in an area where LTE/NR <BR>cannot provide normal service but only C2K can provide normal service.<BR>1) Separate MPSR to 2 phases, one is power up phase, the other is system lost phase.<BR>The two phases will use the same custom defined counter.<BR>- Power up phase: When the card never got normal service in LTE/NR,<BR>DUT will stay at power up phase.<BR>MPSR timer start according to new custom defined values <BR>and will not be interrupted by SCREEN ON.<BR>- System lost phase: When the card had earlier got normal service in LTE/NR <BR>but now LTE/NR system is lost, MPSR timer should start <BR>according to new custom defined values when SCREEN is OFF.<BR>MPSR timer value should be reset to constant value <BR>of 2 min when SCREEN is ON.<BR>2) The above mechanism should be applicable for all cards.<BR>This SBP is for GMSS module to trigger Incremental MPSR in GMSS based on the below custom option<BR>which defines the customized MPSR value and the repeat counter-<BR>GMSS_CUSTOM_INCREMENTAL_MPSR_TIMER_VALUE_SECS[] and<BR>GMSS_CUSTOM_INCREMENTAL_MPSR_REPEAT_COUNTER[]",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x01:On<BR>0x00:Off,,,N/A,MD Config,Modem - Customer Requirement,,,[Prerequisite] UE with CT SIM card inserted<BR>[Operation steps] Enter an area with 1x coverage but no LTE/NR coverage.<BR>[Expected results] Check if power consumption is reduced due to incremental increase in MPSR_TIMER value.,Pass,,,,
23729,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[166].SBP_CA_MAX_MIMO_LAYERS,modem_sbp_config[166].SBP_CA_MAX_MIMO_LAYERS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Support of maximumCCsRetrieval in LTE<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23730,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[166].SBP_LTE_REPORT_FALLBACK_CA,modem_sbp_config[166].SBP_LTE_REPORT_FALLBACK_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Report fallback band combinations in LTE<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23731,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[166].SBP_SUPPORT_LTE_SKIPPED_FALLBACK_CA,modem_sbp_config[166].SBP_SUPPORT_LTE_SKIPPED_FALLBACK_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Support of skippfallback CA combinations in LTE<BR>bit 0:0:Not support<BR>bit 1:1:Support<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23732,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",support_maximumCCsRetrieval,support_maximumCCsRetrieval,OTA and OTA BY OP,no,no,no,no,"[MCF] 3GPP TS 36.331, This field indicates whether UE supports reception of requestedMaxCCsDL and requestedMaxCCsUL. 0x0: Not supported, 0x1: Supported",ENUM,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23733,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",support_requestReducedFormat_r13,support_requestReducedFormat_r13,OTA and OTA BY OP,no,no,no,no,"[MCF] 3GPP TS 36.331, This field indicates that the UE if supported is requested to provide supported CA band combinations in the supportedBandCombinationReduced-r13 instead of the supportedBandCombination-r10. 0x0: Not supported, 0x1: Supported",ENUM,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23734,60935,NVRAM_EF_UE_EUTRA_CAP_CSFB_LID,"1,2",support_skipFallbackCombinations_r13,support_skipFallbackCombinations_r13,OTA and OTA BY OP,no,no,no,no,"[MCF] 3GPP TS 36.331, This field indicates that the UE shall explicitly exclude fallback CA band combinations in capability signalling. 0x0: Not supported, 0x1: Supported",ENUM,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-23738,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,mpr_lut_pwrcls1dot5,mpr_by_band[0~39].mpr_lut_pwrcls1dot5,OTA,no,no,no,no,"Power class 1.5 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-23739,57407,NVRAM_EF_NL1_VZW_MPRADJTBL_LID,1,vzw_mpr_lut_pwrcls1dot5,vzw_mpr.vzw_mpr_lut_pwrcls1dot5,OTA,no,no,no,no,"Power class 1.5 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+23738,57359,NVRAM_EF_NL1_MPRADJTBL_LID,1,mpr_lut_pwrcls1dot5,mpr_by_band[0~39].mpr_lut_pwrcls1dot5,Not Support,no,no,no,no,"Power class 1.5 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+23739,57407,NVRAM_EF_NL1_VZW_MPRADJTBL_LID,1,vzw_mpr_lut_pwrcls1dot5,vzw_mpr.vzw_mpr_lut_pwrcls1dot5,Not Support,no,no,no,no,"Power class 1.5 MPR value(Table6.2.2-2 in38.101-1), unit is 1/256 dB",UNION,68,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23924,1345,NVRAM_EF_LTECSR_PROFILE_LID,"1,2",ra_duration_low,ra_duration_low,OTA and OTA BY OP,no,no,no,no,[MCF]Unit: ms. The duration (ms) when good state is observed for Up-Switch. Refer to TS 26.114 DURATION_LOW.,UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int,,,,MD Config,Modem - Customer Requirement,,,[Init] refer to LTECSR bitrate adaption base on signal quality feature test<BR>[Test Step] refer to LTECSR bitrate adaption base on signal quality feature test<BR>[Expected Result] refer to LTECSR bitrate adaption base on signal quality feature test,Untested,,,,
23925,1345,NVRAM_EF_LTECSR_PROFILE_LID,"1,2",ra_duration_max,ra_duration_max,OTA and OTA BY OP,no,no,no,no,[MCF]Unit: ms. The duration (ms) when poor state is observed for Down-Switch. Refer to TS 26.114 DURATION_MAX.,UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: the range of int type,,,,MD Config,Modem - Customer Requirement,,,"[Init]<BR>Init ra_duration_max:10000<BR>ra_duration_low:15000<BR>ra_rsrp_good_th:70<BR>ra_rsrp_poor_th:75<BR>UE-A and UE-B should support EVS codec.<BR>br set to 4 to 6 means 5.9kbps - 24.4kbps<BR>[Test Scenario]<BR>1 UE-A make call to UE-B.<BR>2 Decrease UE-A's signal quality, worse than -75db. Continued more than 10s.<BR>3 Increase UE-A's signal quality, better than -70db. Continues more than 15s.<BR>4 End the phone call.<BR>[Expected Result]<BR>At step 1, UE-A should establish call by codec EVS at 24.4kbps<BR>At step 2, UE-A should do-switch the codec bitrate when signal lower than -75db continued more than 10s.<BR>At step 3, UE-A should up-switch the codec bitrate when signal higher than -70db continued more than 15s.",Untested,,,,
23926,1345,NVRAM_EF_LTECSR_PROFILE_LID,"1,2",ra_para,ra_para,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0x0001: UL_BITRATE_CHANGE_ENABLE<BR>0x0002: RA_BY_SIG_QUALITY_ENABLED<BR>0x0003: RA_CODEC_RATE_PREFERRED,,,,MD Config,Modem - Customer Requirement,,,"[Init]<BR>Init ra_duration_max:10000<BR>ra_duration_low:15000<BR>ra_rsrp_good_th:70<BR>ra_rsrp_poor_th:75<BR>UE-A and UE-B should support EVS codec.<BR>br set to 4 to 6 means 5.9kbps - 24.4kbps<BR>[Test Scenario]<BR>1 UE-A make call to UE-B.<BR>2 Decrease UE-A's signal quality, worse than -75db. Continued more than 10s.<BR>3 Increase UE-A's signal quality, better than -70db. Continues more than 15s.<BR>4 End the phone call.<BR>[Expected Result]<BR>At step 1, UE-A should establish call by codec EVS at 24.4kbps<BR>At step 2, UE-A should do-switch the codec bitrate when signal lower than -75db continued more than 10s.<BR>At step 3, UE-A should up-switch the codec bitrate when signal higher than -70db continued more than 15s.",Untested,,,,
@@ -10581,12 +10581,12 @@
23950,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",register_event_subscribe_support,ua_config.register_event_subscribe_support,OTA and OTA BY OP,no,no,no,no,This setting is used to control SIP reg event sending during IMS registration procedure. Enabled by default as per 3GPP TS 24.229.<BR>0: Not send reg event SUBSCRIBE<BR>1: Send reg event SUBSCRIBE,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Send reg event SUBSCRIBE,,,,IMS,IMS,,,1) Enable configuration<BR>2) Perform IMS registration<BR>3) check SIP view log and notice that reg-event SUBSCRIBE does not happen after IMS registration.,Untested,,,,
23951,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",register_event_subscribe_support.register_event_subscribe_support,ua_config.register_event_subscribe_support.register_event_subscribe_support,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>This setting is used to control SIP reg event sending during IMS registration procedure. Enabled by default as per 3GPP TS 24.229.<BR>bit 0:0:Not send reg event SUBSCRIBE<BR>bit 1:1:Send reg event SUBSCRIBE<BR>,BIT,8,,8,1,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~1,,,,IMS,IMS,,,1) Enable configuration<BR>2) Perform IMS registration<BR>3) check SIP view log and notice that reg-event SUBSCRIBE does not happen after IMS registration.,Untested,,,,
23952,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[175].SBP_L5_AUTO_DEACT_RSP,modem_sbp_config[175].SBP_L5_AUTO_DEACT_RSP,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>L5 send data deact response automatically<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~1,,,,Telephony Service (L5U),MTK Proprietary,,,Test in machine (N)<BR>Test Time (10)<BR>[Init]<BR>establish a PDN<BR>[Test Step]<BR>network disconnect this PDN<BR>[Expected Result]<BR>chech L5 send deact response or not,Pass,,,,
-23953,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",allow_call_while_registering,imc_config.allow_call_while_registering,OTA and OTA BY OP,no,no,no,no,"To allow a normal call attempt to be queued in IMC, and wait for the result of an ongoing IMS registration.<BR>0: Disallow a normal call to be queued in IMC while UE is registering to IMS.<BR>1: Allow a normal call to be queued in IMC while UE is registering to IMS.<BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+23953,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",allow_call_while_registering,imc_config.allow_call_while_registering,OTA and OTA BY OP,no,no,no,no,"To allow a normal call attempt to be queued in IMC, and wait for the result of an ongoing IMS registration.<BR>0: Disallow a normal call to be queued in IMC while UE is registering to IMS.<BR>1: Allow a normal call to be queued in IMC while UE is registering to IMS.",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Allow a normal call to be queued in IMC while UE is registering to IMS<BR>0:Disallow a normal call to be queued in IMC while UE is registering to IMS,,,,IMS,IMS,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins<BR>[Init]<BR>UE EPS-only attached to LTE.<BR>[Test Step]<BR>RnS L_IMS_VoLTE_524172<BR>[Expected Result]<BR>IMC queues the MO call request during IMS registration.,Untested,,,,
23954,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",allow_call_while_registering.allow_call_while_registering,imc_config.allow_call_while_registering.allow_call_while_registering,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>To allow a normal call attempt to be queued in IMC, and wait for the result of an ongoing IMS registration.<BR>bit 0:0:Disallow a normal call to be queued in IMC while UE is registering to IMS.<BR>bit 1:1:Allow a normal call to be queued in IMC while UE is registering to IMS.<BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-23955,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_f1_timer_timeout,ua_config.mo_f1_timer_timeout,OTA and OTA BY OP,no,no,no,no,"UE shall start the f1 timer when there is a normal call event triggered while the UE is registering.<BR>The timer shall be terminated whenever there is any final response (200 OK/403) against the SIP REGISTER request, timer F expires, or the call is ended by user or other events.<BR>0: disable the f1 timer<BR>Unit:sec<BR>",UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+23955,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_f1_timer_timeout,ua_config.mo_f1_timer_timeout,OTA and OTA BY OP,no,no,no,no,"UE shall start the f1 timer when there is a normal call event triggered while the UE is registering.<BR>The timer shall be terminated whenever there is any final response (200 OK/403) against the SIP REGISTER request, timer F expires, or the call is ended by user or other events.<BR>0: disable the f1 timer<BR>Unit:sec",UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 1~4294967295:Activate the f1 timer for the specified time in seconds after UE has sent the SIP REGISTER when the user triggers the call.<BR>int: 0:disable the f1 timer,,,,IMS,IMS,,,Test in machine (Y/N) Y<BR>Test Time (minutes) 10 mins<BR>[Init]<BR>UE EPS-only attached to LTE.<BR>[Test Step]<BR>RnS L_IMS_VoLTE_524172<BR>[Expected Result]<BR>IMC queues the MO call request during IMS registration.,Untested,,,,
23956,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_f1_timer_timeout.mo_f1_timer_timeout,ua_config.mo_f1_timer_timeout.mo_f1_timer_timeout,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>UE shall start the f1 timer when there is a normal call event triggered while the UE is registering. The timer shall be terminated whenever there is any final response (200 OK/403) against the SIP REGISTER request, timer F expires, or the call is ended by user or other events.<BR>bit 0:0:disable the f1 timer<BR>",BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
23957,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",still_allow_when_ims_register_sent,profile_normal.still_allow_when_ims_register_sent,OTA BY OP,no,no,no,yes,still allow when ims register sent,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,test cases related to GID-MTRREQ-524172,Pass,,,,
-23982,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reset_reg_5626_count_in_flight_mode,ua_config.reset_reg_5626_count_in_flight_mode,OTA and OTA BY OP,no,no,no,no,"To reset the RFC 5626 counter to 0 upon the UE enters the flight mode, which can be utilized to facilitate the tester to test cases more efficiently without always rebooting the UE.<BR>0: not to reset the RFC 5626 failing count while entering the flight mode<BR>1: reset the RFC 5626 failing count while entering the flight mode<BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,Test in machine (Y/N): Y<BR>[Init]<BR>Bootup DUT<BR>[Test Step]<BR>Run TMOUS machine tests and not to reboot the device between each test:<BR>L_IMS_VoLTE_6758_REG_300<BR>L_IMS_VoLTE_6758_REG_301<BR>L_IMS_VoLTE_6758_REG_302<BR>L_IMS_VoLTE_6758_REG_403_1<BR>[Expected Result]<BR>All tests get passed,Untested,,,,
+23982,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reset_reg_5626_count_in_flight_mode,ua_config.reset_reg_5626_count_in_flight_mode,OTA and OTA BY OP,no,no,no,no,"To reset the RFC 5626 counter to 0 upon the UE enters the flight mode, which can be utilized to facilitate the tester to test cases more efficiently without always rebooting the UE.<BR>0: not to reset the RFC 5626 failing count while entering the flight mode<BR>1: reset the RFC 5626 failing count while entering the flight mode",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:not to reset the RFC 5626 failing count while entering the flight mode<BR>1:reset the RFC 5626 failing count while entering the flight mode,,,,IMS,IMS,,,Test in machine (Y/N): Y<BR>[Init]<BR>Bootup DUT<BR>[Test Step]<BR>Run TMOUS machine tests and not to reboot the device between each test:<BR>L_IMS_VoLTE_6758_REG_300<BR>L_IMS_VoLTE_6758_REG_301<BR>L_IMS_VoLTE_6758_REG_302<BR>L_IMS_VoLTE_6758_REG_403_1<BR>[Expected Result]<BR>All tests get passed,Untested,,,,
23983,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reset_reg_5626_count_in_flight_mode.reset_reg_5626_count_in_flight_mode,ua_config.reset_reg_5626_count_in_flight_mode.reset_reg_5626_count_in_flight_mode,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>To reset the RFC 5626 counter to 0 upon the UE enters the flight mode, which can be utilized to facilitate the tester to test cases more efficiently without always rebooting the UE.<BR>bit 0:0:not to reset the RFC 5626 failing count while entering the flight mode<BR>bit 1:1:reset the RFC 5626 failing count while entering the flight mode<BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
23985,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_PREFER_LTE_WHEN_NO_PAGING_SHARING,modem_sbp_config[167].SBP_PREFER_LTE_WHEN_NO_PAGING_SHARING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Prefer LTE when paging sharing not enable<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not Enabled<BR>1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Follow SBP Framework,Untested,,,,
23986,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[162].SBP_VIDLE_LTE_PREFER_OPERATOR_CHECK,modem_sbp_data_config[162].SBP_VIDLE_LTE_PREFER_OPERATOR_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Operator based Enable/Disable LTE prefer feature<BR>bit 0:0:LTE prefer feature allowed for CT (DATA sim) + ANY (NON-DATA sim)<BR>bit 1:1:LTE prefer feature allowed for CMCC (DATA sim) + CMCC (NON-DATA sim)<BR>bit 2:2:LTE prefer feature allowed for CT (DATA sim) + ANY (NON-DATA sim) and CMCC (DATA sim) + CMCC (NON-DATA sim)<BR>",BIT,8,,8,0x02,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10613,24 +10613,24 @@
24185,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",send_ind_to_disable_nr_before_normal_search,profile_emerg.send_ind_to_disable_nr_before_normal_search,OTA BY OP,no,no,no,yes,"send_ind_to_disable_nr_before_normal_search (0/1: 0 - disable NV, 1 - enable NV)",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"Dish or Docomo operator change<BR><BR>EMC=0, EMF=0, dial emergency call when UE is registered over NR normal service",Pass,,,,
24186,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_NR_CAP_DISABLE_PUSCH_LBRM,modem_sbp_config[169].SBP_NR_CAP_DISABLE_PUSCH_LBRM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable pusch_LBRM transmission in NR<BR>bit 0:0:Default behavior, NOT overwrite as disabled<BR>bit 1:1:Overwrite as disabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
24188,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_L5_GET_CALL_CNF_WITH_GLOBAL_IPV6,modem_sbp_config[167].SBP_L5_GET_CALL_CNF_WITH_GLOBAL_IPV6,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>L5 returns global ipv6 in data get call cnf<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,GET_CALL_CNF_WITH_GLOBAL_IPV6 value is 0(disable) and 1(enable),,,,MD Config,Modem - Customer Requirement,,,enable GET_CALL_CNF_WITH_GLOBAL_IPV6,Untested,,,,
-24195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[181].SBP_NR_RESEL_IGNORE_HIGHER_PRIO_BAD_CELL,modem_sbp_config[181].SBP_NR_RESEL_IGNORE_HIGHER_PRIO_BAD_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not ignore higher priority bad cell in NR idle reselection<BR>bit 0:0:Feature not enabled<BR>bit 1:1:Feature enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Not Enabled,,,,,,,,Follow SBP Framework,Pass,,,,
+24195,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[181].SBP_NR_RESEL_IGNORE_HIGHER_PRIO_BAD_CELL,modem_sbp_config[181].SBP_NR_RESEL_IGNORE_HIGHER_PRIO_BAD_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not ignore higher priority bad cell in NR idle reselection<BR>bit 0:0:Feature not enabled<BR>bit 1:1:Feature enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enabled<BR>0:Not Enabled,,,,,,,,Follow SBP Framework,Untested,,,,
24199,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",disallow_wgcs_for_specific_case_to_redial_c2k_ecc,profile_normal.disallow_wgcs_for_specific_case_to_redial_c2k_ecc,OTA BY OP,no,no,no,yes,To disallow 3GPP CS domain in normal call for specific operator and dialed number that may need to redial it as c2k emergency call,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
24200,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_LBS_LPP_ALLOW_NILR_AFTER_EMC_END,modem_sbp_config[169].SBP_LBS_LPP_ALLOW_NILR_AFTER_EMC_END,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>The NILR session not allowed after an emergency call ends.<BR>bit 0:0:Allow NILR<BR>bit 1:1:Not allow NILR",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:0 - NILR not supported upto 5 mins after an end of EMC.<BR>1 - NILR supported upto 5 mins after an end of EMC,,,,MD Config,Modem - Customer Requirement,,,Test in machine (Y/N) N<BR>Test Time (minutes) 5 minutes<BR>[Init]<BR>[Test Step]<BR>LPP NILR test after an emergency call end.<BR>[Expected Result],Pass,,,,
24697,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[173].SBP_CALL_FORWARD_RSP_ONLY_FOR_TELEPHONY_BS,modem_sbp_config[173].SBP_CALL_FORWARD_RSP_ONLY_FOR_TELEPHONY_BS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Send call forward response to AP for all the basic services<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-24707,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ctrl_bmp,meas_mob_performance.postpone_a2_for_b1b2.ctrl_bmp,OTA and OTA BY OP,no,no,no,no,"0x01: disable on high speed, 0x02: enable lower_a2_rsrp_th, 0x04: enable lower_a2_rsrq_th, 0x08: disable on test SIM",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0xff,,,,MD Config,Modem - Customer Requirement,,,by MCF framework,Untested,,,,
+24707,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",ctrl_bmp,meas_mob_performance.postpone_a2_for_b1b2.ctrl_bmp,OTA and OTA BY OP,no,no,no,no,"0x01: disable on high speed, 0x02: enable lower_a2_rsrp_th, 0x04: enable lower_a2_rsrq_th, 0x08: disable on test SIM",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0xff,,,,MD Config,Modem - Customer Requirement,,,by MCF framework,Pass,,,,
24708,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",srv_rsrp_th,meas_mob_performance.postpone_a2_for_b1b2.srv_rsrp_th,OTA and OTA BY OP,no,no,no,no,"serving cell rsrp threshold, unit: qdBm, range: -640~-120, disable: 0x8000.",SHORT,2,,,0xfe20,NR15.R3.MD700.IVT.MP1MR3.MP,,0xfe20 (-460),,,,MD Config,Modem - Customer Requirement,,,by MCF framework,Untested,,,,
24709,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",srv_rsrq_th,meas_mob_performance.postpone_a2_for_b1b2.srv_rsrq_th,OTA and OTA BY OP,no,no,no,no,"serving cell rsrq threshold, unit: qdB , range: -180~80, disable: 0x8000.",SHORT,2,,,0x8000,NR15.R3.MD700.IVT.MP1MR3.MP,,0x8000,,,,MD Config,Modem - Customer Requirement,,,by MCF framework,Untested,,,,
24710,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",srv_sinr_th,meas_mob_performance.postpone_a2_for_b1b2.srv_sinr_th,OTA and OTA BY OP,no,no,no,no,"serving cell sinr threshold, unit: qdB , range: -100~160, disable: 0x8000.",SHORT,2,,,0x8000,NR15.R3.MD700.IVT.MP1MR3.MP,,0x8000,,,,MD Config,Modem - Customer Requirement,,,by MCF framework,Untested,,,,
24711,2435,NVRAM_EF_NRRC_COMMON_CONFIG_LID,"1,2",timer_postpone_a2,meas_mob_performance.postpone_a2_for_b1b2.timer_postpone_a2,OTA and OTA BY OP,no,no,no,no,to postpone a2 for how long in ms if B1 or B2 configured,SHORT,2,,,0x4b0,NR15.R3.MD700.IVT.MP1MR3.MP,,0x4B0 (1200),,,,MD Config,Modem - Customer Requirement,,,by MCF framework,Untested,,,,
-24712,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[168].SBP_NR_POSTPONE_A2_FOR_B1B2,modem_sbp_config[168].SBP_NR_POSTPONE_A2_FOR_B1B2,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable this feature. Follow NW's configuration to judge and report A2, B1, B2.<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,serv_rsrp_threh = -460<BR>others 0xff:postpone A2 for B1B2 if serving is above serv_rsrp_threshole,,,,MD Config,Modem - Customer Requirement,,,MCF framwrok,Untested,,,,
-24714,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[168].SBP_VGMM_TRIGGER_LOCAL_RELEASE_AND_MRU_WHEN_IMS_DRB_MISSED_DURING_GEMINI_RECOV_MRU,modem_sbp_config[168].SBP_VGMM_TRIGGER_LOCAL_RELEASE_AND_MRU_WHEN_IMS_DRB_MISSED_DURING_GEMINI_RECOV_MRU,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>set the resume cause as ims-related to NRRC<BR>bit 0:0:Not Supported<BR>bit 1:1:Supported",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+24712,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[168].SBP_NR_POSTPONE_A2_FOR_B1B2,modem_sbp_config[168].SBP_NR_POSTPONE_A2_FOR_B1B2,OTA and OTA BY OP,no,no,no,yes,,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,serv_rsrp_threh = -460<BR>others 0xff:postpone A2 for B1B2 if serving is above serv_rsrp_threshole,,,,MD Config,Modem - Customer Requirement,,,MCF framwrok,Untested,,,,
+24714,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[168].SBP_VGMM_TRIGGER_LOCAL_RELEASE_AND_MRU_WHEN_IMS_DRB_MISSED_DURING_GEMINI_RECOV_MRU,modem_sbp_config[168].SBP_VGMM_TRIGGER_LOCAL_RELEASE_AND_MRU_WHEN_IMS_DRB_MISSED_DURING_GEMINI_RECOV_MRU,OTA and OTA BY OP,no,no,no,yes,"When IMS pdu is active and NW hasn't configured ims drb to UE during Gemini Recovery MRU, then trigger local release and another MRU with UE has pending data on IMS pdu,<BR>then expect NW would configure ims drb further.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,N/A,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
24736,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",send_cancel_tcall_timeout_no_resp,ua_config.send_cancel_tcall_timeout_no_resp,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:If not response received for INVITE and TCALL expires,send CANCEL",,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
24737,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",send_cancel_tcall_timeout_no_resp.send_cancel_tcall_timeout_no_resp,ua_config.send_cancel_tcall_timeout_no_resp.send_cancel_tcall_timeout_no_resp,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>If not response received for INVITE and TCALL expires,send CANCEL.<BR>bit 0:0:Not send CANCEL<BR>bit 1:1:Send CANCEL<BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
24738,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[168].SBP_DISABLE_MM_INTEGRITY_CHECKING,modem_sbp_config[168].SBP_DISABLE_MM_INTEGRITY_CHECKING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Don't skip integrity checking for peer messages and ignore peer messages that are not integrity protected<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,MD Config,Modem - Customer Requirement,,,"[Test Step] <BR>Power on UE, enable SBP and camp on 2/3G, UE performs LAU and GMM Attach<BR><BR>[Expected Result]<BR>Non-integrity protected peer messages are also processed successfully",Untested,,,,
24751,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[163].SBP_NR_IMS_EMC_ENH_CELL_BAR_TIME,modem_sbp_data_config[163].SBP_NR_IMS_EMC_ENH_CELL_BAR_TIME,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR Cell excludsion time for cell IMS emergency support check",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-24757,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_ENABLE_PINGPONG_BAR_NR_IRAT,modem_sbp_config[170].SBP_ENABLE_PINGPONG_BAR_NR_IRAT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable NR IRAT ping-pong-bar enhancement<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>0:bit 0:0:Not Enabled<BR>bit 1:1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Follow SBP framework UT/IT,Pass,,,,
+24757,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_ENABLE_PINGPONG_BAR_NR_IRAT,modem_sbp_config[170].SBP_ENABLE_PINGPONG_BAR_NR_IRAT,OTA and OTA BY OP,no,no,no,yes,Enable NR IRAT ping-pong-bar enhancement.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1:bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>0:bit 0:0:Not Enabled<BR>bit 1:1:Enabled,,,"if compile option __ENABLE_PINGPONG_BAR_NR_IRAT__ is defined, the SBP is enabled",MD Config,Modem - Customer Requirement,,,Follow SBP framework UT/IT,Pass,,,,
24759,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[168].SBP_4G5_PINGPONG_AVOID,modem_sbp_config[168].SBP_4G5_PINGPONG_AVOID,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Avoid LTE/NR reselection ping-pong<BR>bit 0:0:Not enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-24769,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_DEREG_VOWIFI_WHEN_CS_CALL_ONGOING,modem_sbp_config[169].SBP_DEREG_VOWIFI_WHEN_CS_CALL_ONGOING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable that UE should dereg VoWiFi when CS call is ongoing.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:Configuration of SBP Feature<BR>Disable that UE should dereg VoWiFi when CS call is ongoing.<BR>Disable that UE should dereg VoWiFi when CS call is ongoing.,,,,IMS,IMS,,,"register vowifi, enter limited service, do ecc over CS.",Untested,,,,
+24769,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_DEREG_VOWIFI_WHEN_CS_CALL_ONGOING,modem_sbp_config[169].SBP_DEREG_VOWIFI_WHEN_CS_CALL_ONGOING,OTA and OTA BY OP,no,no,no,yes,"When CS call is ongoing, UE should dereg VoWiFi",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:Configuration of SBP Feature<BR>Disable that UE should dereg VoWiFi when CS call is ongoing.<BR>Disable that UE should dereg VoWiFi when CS call is ongoing.,,,N/A,IMS,IMS,,,"register vowifi, enter limited service, do ecc over CS.",Untested,,,,
24781,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[174].SBP_NR_CUSTOM_ENABLE_BAND_BY_PLMN,modem_sbp_config[174].SBP_NR_CUSTOM_ENABLE_BAND_BY_PLMN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Let user can enable band by plmn<BR>bit 0:0:Not enabled this feature<BR>bit 1:1:Enable this feature<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
24782,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[174].SBP_NR_CUSTOM_ENABLE_BAND_BY_PLMN_UNDER_TEST_SIM,modem_sbp_config[174].SBP_NR_CUSTOM_ENABLE_BAND_BY_PLMN_UNDER_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>custom enable band by plmn can be used under test sim or test mode<BR>bit 0:0:Not enabled this feature for test sim or test mode<BR>bit 1:1:Enabled this feature for test sim or test mode<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
24783,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_ERRC_A3_HO_ENH_TRIGGER_EARLY_REEST,modem_sbp_config[170].SBP_ERRC_A3_HO_ENH_TRIGGER_EARLY_REEST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Trigger Early Re-establishment if N/W not responding for 10 consecutive A3 MR.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10654,41 +10654,41 @@
25650,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_NR_TO_LTE_B1B2_CUSTOM_CELL_THRESH_FOR_VONR,modem_sbp_config[170].SBP_NR_TO_LTE_B1B2_CUSTOM_CELL_THRESH_FOR_VONR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>additional pcell/ncell custom threshold check for B1/B2 report when under VoNR ongoing<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
25651,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[170].SBP_VGMM_BYPASS_SR_BLOCK_IN_CONNECTED,modem_sbp_config[170].SBP_VGMM_BYPASS_SR_BLOCK_IN_CONNECTED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable VGMM bypss SR block in connected<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:default off,,,,MD Config,Modem - Customer Requirement,,,run VGMM gtest,Pass,,,,
25681,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_ENABLE_LTE_BLER_REPORT,modem_sbp_config[169].SBP_ENABLE_LTE_BLER_REPORT,Not Support,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable LTE PDSCH/PUSCH BLER report<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
-25688,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[171].SBP_OP12_ONSITE_LTE_UICC,modem_sbp_config[171].SBP_OP12_ONSITE_LTE_UICC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>this SIM is OP12 onsite UICC<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+25688,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[171].SBP_OP12_ONSITE_LTE_UICC,modem_sbp_config[171].SBP_OP12_ONSITE_LTE_UICC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>this SIM is OP12 onsite UICC<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-255,,,,On-Site (Private) LTE Network Support,OP Requirement,,,Step1: insert VZW private card<BR>Step2: power on the device,Untested,,,,
25700,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",allow_ims_with_vonr_switch_off,profile_emerg.allow_ims_with_vonr_switch_off,OTA BY OP,no,no,no,yes,To allow request IMS emergency MO even if vonr switch is off,UNSIGNED CHAR,1,,,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,1) VoNR switch OFF<BR>2) Trigger emergency call and UE shouldn't attempt call on NR RAT,Untested,,,,
25798,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_bands,enable_list.plmn_list[0~19].endc_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of endc bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~1024,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25799,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_band_num,enable_list.plmn_list[0~19].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25800,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc1,enable_list.plmn_list[0~19].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25801,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc2,enable_list.plmn_list[0~19].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25802,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc3,enable_list.plmn_list[0~19].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25803,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc1,enable_list.plmn_list[0~19].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25804,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc2,enable_list.plmn_list[0~19].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25805,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc3,enable_list.plmn_list[0~19].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+25799,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_band_num,enable_list.plmn_list[0~19].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25800,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc1,enable_list.plmn_list[0~19].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25801,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc2,enable_list.plmn_list[0~19].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25802,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc3,enable_list.plmn_list[0~19].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25803,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc1,enable_list.plmn_list[0~19].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25804,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc2,enable_list.plmn_list[0~19].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25805,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc3,enable_list.plmn_list[0~19].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
25806,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_bands,enable_list.plmn_list[0~19].sa_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~1024,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25807,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_band_num,enable_list.plmn_list[0~19].sa_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of sa bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25808,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",plmn_num,enable_list.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 20),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~20,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+25807,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_band_num,enable_list.plmn_list[0~19].sa_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of sa bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25808,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",plmn_num,enable_list.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 20),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~20,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
25809,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_bands,enable_list_for_international_roaming.plmn_list[0~9].endc_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of endc bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~1024,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25810,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_band_num,enable_list_for_international_roaming.plmn_list[0~9].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25811,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc1,enable_list_for_international_roaming.plmn_list[0~9].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25812,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc2,enable_list_for_international_roaming.plmn_list[0~9].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25813,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc3,enable_list_for_international_roaming.plmn_list[0~9].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25814,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc1,enable_list_for_international_roaming.plmn_list[0~9].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25815,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc2,enable_list_for_international_roaming.plmn_list[0~9].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25816,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc3,enable_list_for_international_roaming.plmn_list[0~9].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+25810,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_band_num,enable_list_for_international_roaming.plmn_list[0~9].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25811,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc1,enable_list_for_international_roaming.plmn_list[0~9].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25812,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc2,enable_list_for_international_roaming.plmn_list[0~9].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25813,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc3,enable_list_for_international_roaming.plmn_list[0~9].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25814,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc1,enable_list_for_international_roaming.plmn_list[0~9].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25815,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc2,enable_list_for_international_roaming.plmn_list[0~9].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25816,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc3,enable_list_for_international_roaming.plmn_list[0~9].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
25817,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_bands,enable_list_for_international_roaming.plmn_list[0~9].sa_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~1024,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25818,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_band_num,enable_list_for_international_roaming.plmn_list[0~9].sa_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of sa bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25819,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",plmn_num,enable_list_for_international_roaming.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 10),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~10,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+25818,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_band_num,enable_list_for_international_roaming.plmn_list[0~9].sa_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of sa bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25819,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",plmn_num,enable_list_for_international_roaming.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 10),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~10,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
25820,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_bands,enable_list_for_national_roaming.plmn_list[0~9].endc_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of endc bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~1024,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25821,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_band_num,enable_list_for_national_roaming.plmn_list[0~9].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25822,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc1,enable_list_for_national_roaming.plmn_list[0~9].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25823,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc2,enable_list_for_national_roaming.plmn_list[0~9].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25824,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc3,enable_list_for_national_roaming.plmn_list[0~9].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25825,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc1,enable_list_for_national_roaming.plmn_list[0~9].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25826,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc2,enable_list_for_national_roaming.plmn_list[0~9].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25827,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc3,enable_list_for_national_roaming.plmn_list[0~9].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+25821,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",endc_band_num,enable_list_for_national_roaming.plmn_list[0~9].endc_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of endc bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25822,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc1,enable_list_for_national_roaming.plmn_list[0~9].plmn.mcc1,OTA and OTA BY OP,no,no,no,no,MCC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25823,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc2,enable_list_for_national_roaming.plmn_list[0~9].plmn.mcc2,OTA and OTA BY OP,no,no,no,no,MCC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25824,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mcc3,enable_list_for_national_roaming.plmn_list[0~9].plmn.mcc3,OTA and OTA BY OP,no,no,no,no,MCC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25825,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc1,enable_list_for_national_roaming.plmn_list[0~9].plmn.mnc1,OTA and OTA BY OP,no,no,no,no,MNC1 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25826,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc2,enable_list_for_national_roaming.plmn_list[0~9].plmn.mnc2,OTA and OTA BY OP,no,no,no,no,MNC2 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~9,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25827,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",mnc3,enable_list_for_national_roaming.plmn_list[0~9].plmn.mnc3,OTA and OTA BY OP,no,no,no,no,MNC3 field of PLMN ID,UNSIGNED CHAR,1,,,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~0xf,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
25828,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_bands,enable_list_for_national_roaming.plmn_list[0~9].sa_bands,OTA and OTA BY OP,no,no,no,no,[MCF]List of bands,UNSIGNED SHORT,64,32,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~1024,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25829,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_band_num,enable_list_for_national_roaming.plmn_list[0~9].sa_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of sa bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-25830,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",plmn_num,enable_list_for_national_roaming.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 10),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~10,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+25829,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",sa_band_num,enable_list_for_national_roaming.plmn_list[0~9].sa_band_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of sa bands related to PLMN code (max 32),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~32,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+25830,2392,NVRAM_EF_MRS_NR_BAND_ENABLE_LIST_LID,"1,2",plmn_num,enable_list_for_national_roaming.plmn_num,OTA and OTA BY OP,no,no,no,no,[MCF]Number of entries in the PLMN list (max 10),UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int:1~10,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
25856,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_ENABLE_CUSTOM_BAR_TIME_FOR_FAKE_CELL,modem_sbp_config[179].SBP_ENABLE_CUSTOM_BAR_TIME_FOR_FAKE_CELL,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable Custom Bar time for fake cell<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
25858,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_GMSS_NO_SIM_SKIP_LTE_NR_SEARCH,modem_sbp_config[178].SBP_GMSS_NO_SIM_SKIP_LTE_NR_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip LTE/NR limited search when no SIM is inserted<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
25859,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_v_media_c_if_a_inactive,ua_config.rm_v_media_c_if_a_inactive,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10731,16 +10731,16 @@
27240,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_CHECKING_CA_WITH_RF_CAP_FOR_TEST_SIM,modem_sbp_config[177].SBP_CHECKING_CA_WITH_RF_CAP_FOR_TEST_SIM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Check CA with RF capability<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
27329,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_DISABLE_SEEK_VOICE_RE_ENABLE_TIMER_EXPIRY,modem_sbp_config[176].SBP_DISABLE_SEEK_VOICE_RE_ENABLE_TIMER_EXPIRY,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE will disable seek voice re enable timer expiry when enabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MCF (Modem Configuration Framework),MCF,,,,Untested,,,,
27330,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_ENABLE_SEEK_VOICE_RE_ENABLE_FEATURE,modem_sbp_config[176].SBP_ENABLE_SEEK_VOICE_RE_ENABLE_FEATURE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE will follow 3GPP 24.301, section 4.5 c) requirement when enabled<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MCF (Modem Configuration Framework),MCF,,,,Untested,,,,
-27402,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[175].SBP_IGNORE_5G_PWS_DUP_CHECK,modem_sbp_config[175].SBP_IGNORE_5G_PWS_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Ignore 5G PWS duplication detection result<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-27499,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[166].SBP_N1_MAX_PDU_EST_TIMEOUT_REACHED_TIMER_VALUE,modem_sbp_data_config[166].SBP_N1_MAX_PDU_EST_TIMEOUT_REACHED_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR disable timer value after several PDU establishment retry",BIT,8,,8,0x0c,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~255},,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-28889,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",clear_gba_key_when_key_expiry,gba_info.clear_gba_key_when_key_expiry,OTA and OTA BY OP,no,no,no,no,Clear GBA key on expiry,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,1 means ENABLED,,,,XCAP IMS-SS,XCAP,,,"Test in machine (Y/N) : N<BR>Test Time (minutes) : Depends upon gba key expiry value<BR>[Init]<BR>[Test Step]<BR>1. Send EGBA ATCMD.<BR>2. Wait for the expiry expiry time value.<BR>3. After key expiry, Send EGBA ATCMD again<BR><BR>[Expected Result]<BR>At step 3 , new key shall be derived from server and it shall be valid.",Untested,,,,
+27402,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[175].SBP_IGNORE_5G_PWS_DUP_CHECK,modem_sbp_config[175].SBP_IGNORE_5G_PWS_DUP_CHECK,OTA and OTA BY OP,no,no,no,yes,"Allow user to manually disable the 5G PWS duplication detection mechanism.<BR>By setting this SBP to TRUE, UE will always display each 5G message received without Duplication detection check.",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,"if compile option __IGNORE_5G_PWS_DUP_CHECK__ is defined, the SBP is enabled",,,,,,Untested,,,,
+27499,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[166].SBP_N1_MAX_PDU_EST_TIMEOUT_REACHED_TIMER_VALUE,modem_sbp_data_config[166].SBP_N1_MAX_PDU_EST_TIMEOUT_REACHED_TIMER_VALUE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>NR disable timer value after several PDU establishment retry",BIT,8,,8,0x0c,NR15.R3.MD700.IVT.MP1MR3.MP,,{0~255},,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
+28889,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",clear_gba_key_when_key_expiry,gba_info.clear_gba_key_when_key_expiry,OTA and OTA BY OP,no,no,no,no,Clear GBA key on expiry,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,short:0-1:0 means DISABLED<BR>1 means ENABLED<BR>1 means ENABLED,,,,XCAP IMS-SS,XCAP,,,"Test in machine (Y/N) : N<BR>Test Time (minutes) : Depends upon gba key expiry value<BR>[Init]<BR>[Test Step]<BR>1. Send EGBA ATCMD.<BR>2. Wait for the expiry expiry time value.<BR>3. After key expiry, Send EGBA ATCMD again<BR><BR>[Expected Result]<BR>At step 3 , new key shall be derived from server and it shall be valid.",Pass,,,,
28890,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",clear_gba_key_when_key_expiry.clear_gba_key_when_key_expiry,gba_info.clear_gba_key_when_key_expiry.clear_gba_key_when_key_expiry,Not Support,no,no,no,no,Clear GBA key on expiry<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
28891,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",gba_key_timeout,gba_info.gba_key_timeout,OTA and OTA BY OP,no,no,no,no,GBA Key Time out value in miliseconds,UNSIGNED SHORT,2,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0- 65535,,,,XCAP IMS-SS,XCAP,,,Test in machine (Y/N) N<BR>Test Time (minutes) 1<BR>[Init]<BR>Insert TMO-US sim card.<BR>[Test Step]<BR>1. Try to access SS.<BR>2. Try to access SS again after 25 hours .Make sure UE don't boots up in between.<BR><BR>[Expected Result]<BR>UE shall fetch key from the server at step 2.,Pass,,,,
-29108,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_num_validity_check,ua_config.disable_num_validity_check,OTA and OTA BY OP,no,no,no,no,[MCF] Nokia specific CPE requirement to allow SIP INVITE to be sent for numbers ending with #<BR>bit 0:0:Disable<BR>bit 1:1:Enable,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,MD Config,Modem - Customer Requirement,,,Set the configuration 1 and check if INVITE sent to numbers ending with #,Untested,,,,
-29109,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_num_validity_check.disable_num_validity_check,ua_config.disable_num_validity_check.disable_num_validity_check,OTA and OTA BY OP,no,no,no,no,[MCF] Nokia specific CPE requirement to allow SIP INVITE to be sent for numbers ending with #<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,MD Config,Modem - Customer Requirement,,,Set the configuration 1 and check if INVITE sent to numbers ending with #,Untested,,,,
+29108,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_num_validity_check,ua_config.disable_num_validity_check,Not Support,no,no,no,no,[MCF] Nokia specific CPE requirement to allow SIP INVITE to be sent for numbers ending with #<BR>bit 0:0:Disable<BR>bit 1:1:Enable,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,MD Config,Modem - Customer Requirement,,,Set the configuration 1 and check if INVITE sent to numbers ending with #,Pass,,,,
+29109,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_num_validity_check.disable_num_validity_check,ua_config.disable_num_validity_check.disable_num_validity_check,OTA and OTA BY OP,no,no,no,no,[MCF] Nokia specific CPE requirement to allow SIP INVITE to be sent for numbers ending with #<BR>bit 0:0:Disable<BR>bit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,MD Config,Modem - Customer Requirement,,,Set the configuration 1 and check if INVITE sent to numbers ending with #,Pass,,,,
29110,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[181].SBP_VGMM_SET_FOR_BIT_AFTER_DATA_SWITCH,modem_sbp_config[181].SBP_VGMM_SET_FOR_BIT_AFTER_DATA_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable set FOR bit after data switch<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,,,,,1. enable SBP_VGMM_SET_FOR_BIT_AFTER_DATA_SWITCH<BR>2. data switch<BR>3. check registration request would set FOR bit=1,Untested,,,,
29126,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[175].SBP_L5_DEREG_FILTER_AFTER_PDN_DEACT_IND,modem_sbp_config[175].SBP_L5_DEREG_FILTER_AFTER_PDN_DEACT_IND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>L5 will deregister all related string filters when a PDN is deactivated by network<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 0~1,,,,Telephony Service (L5U),MTK Proprietary,,,Test plan of parameter<BR>Functional test step<BR>Format:<BR>Test in machine (N)<BR>Test Time (minutes)<BR>[Init] PDN establishment<BR>[Test Step]<BR>NW deactivate PDN<BR>[Expected Result]<BR>check the filter is deregisted or not,Pass,,,,
-29136,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_SUBADDR_TYPE_IA5,modem_sbp_config[176].SBP_SUBADDR_TYPE_IA5,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Send subaddress in IA5 format<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+29136,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_SUBADDR_TYPE_IA5,modem_sbp_config[176].SBP_SUBADDR_TYPE_IA5,OTA and OTA BY OP,no,no,no,yes,This SBP when enabled sends the subaddress data in IA5 format.,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,no,,,,,,Untested,,,,
29150,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[175].SBP_EMM_EXCLUDE_CLASSMARK3_WHEN_GSM_RAT_DISABLED,modem_sbp_config[175].SBP_EMM_EXCLUDE_CLASSMARK3_WHEN_GSM_RAT_DISABLED,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Not to include classmark3 IE when GSM disabled<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
29152,1169,NVRAM_EF_NAS_NSA_WHITELIST_PLMN_LID,"1,2",plmn,nas_nsa_whitelist_plmn_table[0~299].plmn,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,3,3,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
29160,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",enhance_ims_reg_wait_time_when_nr_recovery_fail,profile_normal.enhance_ims_reg_wait_time_when_nr_recovery_fail,OTA BY OP,no,no,no,yes,To enhance ims registration wait time when IMS recovery failed in NR,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,1) UE registered on NR<BR>2) User dials normal call<BR>3) Call attempt fail due to IMS recovery on NR RAT<BR>4) IMS recovery failed on NR RAT<BR>5) UE should re-try the call on IMS domain with RAT as LTE,Untested,,,,
@@ -10758,8 +10758,8 @@
29571,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_ECALL_TIMERS_ENABLED_IN_MODEM,modem_sbp_config[176].SBP_ECALL_TIMERS_ENABLED_IN_MODEM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>eCall timers enabled in modem<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"bit 0:0:Disable<BR>bit 1:1:Enabled:[MCF,RUNTIME] Configuration of SBP Feature<BR>eCall timers enabled in modem<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",,,__ECALL_SUPPORT__,eCall,MTK Proprietary,,,"AT+ESBP = 5,"SBP_ECALL_TIMERS_ENABLED_IN_MODEM",1",Pass,,,,
29572,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_ECALL_MODE_SWITCH_CUSTOMIZATION,modem_sbp_config[176].SBP_ECALL_MODE_SWITCH_CUSTOMIZATION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>eCall mode switch by customer<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
29709,1169,NVRAM_EF_NAS_NSA_WHITELIST_PLMN_LID,"1,2",number_of_nsa_whitelist_plmn,number_of_nsa_whitelist_plmn,OTA and OTA BY OP,no,no,no,no,[MCF] number of nsa whitelist plmn,UNSIGNED SHORT,2,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-29710,2311,NVRAM_EF_SSDS_COMMON_CONFIG_PROFILE_LID,"1,2",stk_ussd_path.stk_ussd_path,stk_ussd_path.stk_ussd_path,OTA and OTA BY OP,no,no,no,no,[MCF]STKUSSD request path<BR><BR>bit 0:0:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_IMS_IF_IMS_REGISTERED<BR>bit 1:1:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_CS<BR>bit 2:2:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_IMS<BR>bit 3:3:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_NOT_SUPPORT<BR>,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,,Untested,,,,
-29737,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_SIM_REPORT_CHANNEL_STATUS_CHANGE,modem_sbp_config[177].SBP_SIM_REPORT_CHANNEL_STATUS_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>SIM report channel status change<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+29710,2311,NVRAM_EF_SSDS_COMMON_CONFIG_PROFILE_LID,"1,2",stk_ussd_path.stk_ussd_path,stk_ussd_path.stk_ussd_path,OTA and OTA BY OP,no,no,no,no,[MCF]STKUSSD request path<BR><BR>bit 0:0:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_IMS_IF_IMS_REGISTERED<BR>bit 1:1:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_CS<BR>bit 2:2:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_IMS<BR>bit 3:3:CUSTOM_SSDS_USSD_REQ_PATH_CONFIG_NOT_SUPPORT,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0-3,,,,XCAP IMS-SS,XCAP,,,Try to send USSD via STK menu,Untested,,,,
+29737,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_SIM_REPORT_CHANNEL_STATUS_CHANGE,modem_sbp_config[177].SBP_SIM_REPORT_CHANNEL_STATUS_CHANGE,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>SIM report channel status change<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
29763,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[175].SBP_CALL_REJECT,modem_sbp_config[175].SBP_CALL_REJECT,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To control _CALL_REJECT_ compilation option<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
29778,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[175].SBP_UE_APPLY_DELAY_AFTER_SR_REJECT_CONGESTION_WO_T3346,modem_sbp_config[175].SBP_UE_APPLY_DELAY_AFTER_SR_REJECT_CONGESTION_WO_T3346,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Apply delay after SR Rej with #22 wo T3346.<BR>bit 0:0:No delay<BR>bit 1:1:With delay<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
29782,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_with_both_calls_hold,ua_config.ect_with_both_calls_hold,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1:This configuration is for whether to support explicit call transfer request when both calls are on hold,,,,IMS,IMS,,,Test Explicit call transfer with both calls on hold<BR>Nokia specific requirement for Colgin,Untested,,,,
@@ -10771,8 +10771,8 @@
29901,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",allow_ims_emerg_while_roaming,profile_emerg.allow_ims_emerg_while_roaming,OTA BY OP,no,no,no,yes,To allow IMS emergency call while UE is roaming,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,Dial emergency call on NR/LTE in roaming.<BR>IMS domain should allowed.,Untested,,,,
29914,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",w2l_ho_failed_dereg_cause,imc_config.w2l_ho_failed_dereg_cause,OTA and OTA BY OP,no,no,no,no,"[MCF,STRING]>The cause of handover failed which IMC will trigger deregister",STRING,256,256,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
29948,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[176].SBP_DISABLE_LTE_ECELLMEAS_FAST_SCAN,modem_sbp_config[176].SBP_DISABLE_LTE_ECELLMEAS_FAST_SCAN,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>LTE ecellmeas perform full band scan<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,"PLMN List with no.of bands are zero , UE should do stored scan followed by full band scan on all UE supported bands",Untested,,,,
-30022,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",apply_3g_sunset_call_spec,ua_config.apply_3g_sunset_call_spec,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>This is for softbank to support old or new requirement based on 3g sunset.<BR>bit 0:0:To support old requirement<BR>bit 1:1:To support new requirement<BR><BR>This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR><BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,IMS,IMS,,,"This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR>",Untested,,,,
-30023,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",apply_3g_sunset_call_spec.apply_3g_sunset_call_spec,ua_config.apply_3g_sunset_call_spec.apply_3g_sunset_call_spec,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>This is for softbank to support old or new requirement based on 3g sunset.<BR>bit 0:0:To support old requirement<BR>bit 1:1:To support new requirement<BR><BR>This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR><BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,IMS,IMS,,,"This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR>",Untested,,,,
+30022,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",apply_3g_sunset_call_spec,ua_config.apply_3g_sunset_call_spec,Not Support,no,no,no,no,"As per new softbank requirement, UE should not do cs fallback if it receives 503 error. But Customer wants to support old requirement that it should do CS fallback.<BR>This config is to ensure whether to support old or new requirement of softbank",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,IMS,IMS,,,"This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.",Untested,,,,
+30023,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",apply_3g_sunset_call_spec.apply_3g_sunset_call_spec,ua_config.apply_3g_sunset_call_spec.apply_3g_sunset_call_spec,OTA and OTA BY OP,no,no,no,no,"As per new softbank requirement, UE should not do cs fallback if it receives 503 error. But Customer wants to support old requirement that it should do CS fallback.<BR>This config is to ensure whether to support old or new requirement of softbank",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0 or 1,,,,IMS,IMS,,,"This configuration is to support old or new requirement based on 3g sunset for softbank<BR>If 3g available and this config is set 1, UE receives SIP 503 for INVITE then DUT should do CSFB.<BR>If config set to 0, UE receives SIP 503 for INVITE then DUT should disconnect call.<BR>",Untested,,,,
30042,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_L5UCC_AUTO_RESUME_CALL_FEATURE_CONFIG,modem_sbp_config[177].SBP_L5UCC_AUTO_RESUME_CALL_FEATURE_CONFIG,OTA and OTA BY OP,no,no,no,yes,Auto Resume Enable or Disable<BR>0: Auto Resume Disable<BR>1: Auto Resume Enable,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"AT+ESBP=5,"SBP_L5UCC_AUTO_RESUME_CALL_FEATURE_CONFIG",1<BR>",Untested,,,,
30109,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_BYPASS_SIM_TYPE_CHECK_FOR_ECALL_MODE_SWITCH,modem_sbp_config[177].SBP_BYPASS_SIM_TYPE_CHECK_FOR_ECALL_MODE_SWITCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>bypass SIM type check<BR>bit 0:0:Disable<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0x00/0x01,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] <BR>1. Insert ecall only card<BR>2. open SBP<BR>3. ecall mode switch set<BR>[Expected Result] The return of set is OK,Pass,,,,
30124,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[177].SBP_ENABLE_PARTIAL_BAND_IN_USA,modem_sbp_config[177].SBP_ENABLE_PARTIAL_BAND_IN_USA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable partial bands setting under USA mcc.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10790,13 +10790,13 @@
30638,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",ignore_baoc_roaming_rule,xcap_info.ignore_baoc_roaming_rule,OTA and OTA BY OP,no,no,no,no,Ignore roaming rule in outgoing call barring ruleset,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,int/short/long: 00~01,,,,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
30639,2496,NVRAM_EF_XCAP_PROFILE_LID,"1,2",ignore_baoc_roaming_rule.ignore_baoc_roaming_rule,xcap_info.ignore_baoc_roaming_rule.ignore_baoc_roaming_rule,OTA and OTA BY OP,no,no,no,no,Ignore roaming rule in outgoing call barring ruleset<BR><BR>bit 0:0:Disabled<BR>bit 1:1:Enabled,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,XCAP IMS-SS,XCAP,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
30646,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[180].SBP_GMSS_NO_SIM_STOP_PERIODIC_LIMITED_RECOVERY_SEARCH,modem_sbp_config[180].SBP_GMSS_NO_SIM_STOP_PERIODIC_LIMITED_RECOVERY_SEARCH,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Skip recovery search during GMSS Early Control<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-1,,,,,,,,"Enable SBP_GMSS_NO_SIM_STOP_PERIODIC_LIMITED_RECOVERY_SEARCH<BR>Power up UE with no SIM inserted.<BR><BR>When UE Camps on LTE/NR Cell with no IMS ECC support, UE should not do recovery search unless a CALL is dialed.",Untested,,,,
-30682,1347,NVRAM_EF_SDM_ADS_PROFILE_LID,"1,2",disable_scbm_for_911_feature,disable_scbm_for_911_feature,OTA BY OP,no,no,no,yes,"[MCF,RUNTIME]disable_scbm_for_911_feature",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-30699,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage,ua_config.sms_mo_pidf_usage,OTA and OTA BY OP,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO SMS. In each bit, 0 means disabled, bit 1 means enabled.",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-30700,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage.b0,ua_config.sms_mo_pidf_usage.b0,OTA and OTA BY OP,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO SMS. In each bit, 0 means disabled, bit 1 means enabled.<BR>Emergency SMS over 3GPP RAT (default:0)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-30701,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage.b1,ua_config.sms_mo_pidf_usage.b1,OTA and OTA BY OP,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO SMS. In each bit, 0 means disabled, bit 1 means enabled.<BR>Emergency SMS over WIFI RAT (default:0)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-30702,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage.b2,ua_config.sms_mo_pidf_usage.b2,OTA and OTA BY OP,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO SMS. In each bit, 0 means disabled, bit 1 means enabled.<BR>Reserved",BIT,6,,6,0x3f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+30682,1347,NVRAM_EF_SDM_ADS_PROFILE_LID,"1,2",disable_scbm_for_911_feature,disable_scbm_for_911_feature,Not Support,no,no,no,yes,"[MCF,RUNTIME]disable_scbm_for_911_feature",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+30699,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage,ua_config.sms_mo_pidf_usage,OTA and OTA BY OP,no,no,no,no,"Bit mask whether to add pidf/location in different kinds of MO SMS.<BR>In each bit, 0 means disabled, 1 means enabled.<BR>b0: Emergency SMS over 3GPP RAT (default:0)<BR>b1: Emergency SMS over WIFI RAT (default:0)<BR>b2~b7: Reserved",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,int: 0~3,,,,IMS,IMS,,,"Test in machine (Y/N): N <BR>Test Time (minutes): 5 <BR>[Init]<BR>make sure this config is corrected set. <BR>make sure UE support emergency SMS on this carrier<BR>IMS registration success<BR>[Test Step]<BR>1. send MO SMS to emergency server (for example, 911) <BR>[Expected Result]<BR>In the SIP MESSAGE sent to NW, there should be PIDF-LO in SIP body.",Untested,,,,
+30700,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage.b0,ua_config.sms_mo_pidf_usage.b0,OTA and OTA BY OP,no,no,no,no,"Bit mask whether to add pidf/location in different kinds of MO SMS.<BR>In each bit, 0 means disabled, 1 means enabled.<BR>b0: Emergency SMS over 3GPP RAT (default:0)<BR>b1: Emergency SMS over WIFI RAT (default:0)<BR>b2~b7: Reserved",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,IMS,IMS,,,"Test in machine (Y/N): N <BR>Test Time (minutes): 5 <BR>[Init]<BR>make sure this config is corrected set. <BR>make sure UE support emergency SMS on this carrier<BR>IMS registration success<BR>[Test Step]<BR>1. send MO SMS to emergency server (for example, 911) <BR>[Expected Result]<BR>In the SIP MESSAGE sent to NW, there should be PIDF-LO in SIP body.",Untested,,,,
+30701,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage.b1,ua_config.sms_mo_pidf_usage.b1,OTA and OTA BY OP,no,no,no,no,"Bit mask whether to add pidf/location in different kinds of MO SMS.<BR>In each bit, 0 means disabled, 1 means enabled.<BR>b0: Emergency SMS over 3GPP RAT (default:0)<BR>b1: Emergency SMS over WIFI RAT (default:0)<BR>b2~b7: Reserved",BIT,1,,1,1,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1,,,,IMS,IMS,,,"Test in machine (Y/N): N <BR>Test Time (minutes): 5 <BR>[Init]<BR>make sure this config is corrected set. <BR>make sure UE support emergency SMS on this carrier<BR>IMS registration success<BR>[Test Step]<BR>1. send MO SMS to emergency server (for example, 911) <BR>[Expected Result]<BR>In the SIP MESSAGE sent to NW, there should be PIDF-LO in SIP body.",Untested,,,,
+30702,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_mo_pidf_usage.b2,ua_config.sms_mo_pidf_usage.b2,OTA and OTA BY OP,no,no,no,no,"Bit mask whether to add pidf/location in different kinds of MO SMS.<BR>In each bit, 0 means disabled, 1 means enabled.<BR>b0: Emergency SMS over 3GPP RAT (default:0)<BR>b1: Emergency SMS over WIFI RAT (default:0)<BR>b2~b7: Reserved",BIT,6,,6,0,NR15.R3.MD700.IVT.MP1MR3.MP,,*:bit: 0,,,,IMS,IMS,,,"Test in machine (Y/N): N <BR>Test Time (minutes): 5 <BR>[Init]<BR>make sure this config is corrected set. <BR>make sure UE support emergency SMS on this carrier<BR>IMS registration success<BR>[Test Step]<BR>1. send MO SMS to emergency server (for example, 911) <BR>[Expected Result]<BR>In the SIP MESSAGE sent to NW, there should be PIDF-LO in SIP body.",Untested,,,,
30726,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_RAC_SET_VDP_BASED_ON_RAT_MODE_FOR_OP50,modem_sbp_config[178].SBP_RAC_SET_VDP_BASED_ON_RAT_MODE_FOR_OP50,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>VDP update based on RAT mode<BR>bit 0:0:Not supported<BR>bit 1:1:Supported<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-30778,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_ENABLE_EUTRAN_AFTER_TIMER_EXPIRY_FOR_TAU_EPS_ONLY_CAUSE_16_17,modem_sbp_config[178].SBP_ENABLE_EUTRAN_AFTER_TIMER_EXPIRY_FOR_TAU_EPS_ONLY_CAUSE_16_17,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable for EUTRAN After TAU EPS Only Cause 16/17 <BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
+30778,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_ENABLE_EUTRAN_AFTER_TIMER_EXPIRY_FOR_TAU_EPS_ONLY_CAUSE_16_17,modem_sbp_config[178].SBP_ENABLE_EUTRAN_AFTER_TIMER_EXPIRY_FOR_TAU_EPS_ONLY_CAUSE_16_17,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable for EUTRAN After TAU EPS Only Cause 16/17 <BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
30780,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[178].SBP_CLI_VALIDITY_INTERWORK_WHEN_CLI_CAUSE_NP_PI_RECEIVED_NO_NUM,modem_sbp_config[178].SBP_CLI_VALIDITY_INTERWORK_WHEN_CLI_CAUSE_NP_PI_RECEIVED_NO_NUM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>To send cli_validity as interwork<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
30795,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_with_org_codec_if_488_vport_0,ua_config.retry_ims_voice_with_org_codec_if_488_vport_0,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
30796,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_ims_voice_with_org_codec_if_488_vport_0.retry_ims_voice_with_org_codec_if_488_vport_0,ua_config.retry_ims_voice_with_org_codec_if_488_vport_0.retry_ims_voice_with_org_codec_if_488_vport_0,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>When making a MO video call and receive 488 with video port 0, retry IMS voice directly by IMS UA with original codecs<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10805,11 +10805,11 @@
30917,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mt_no_prcd_in_sip.mt_no_prcd_in_sip,ua_config.mt_no_prcd_in_sip.mt_no_prcd_in_sip,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>If mt reINVITE without prcd in sip, but include qos in sdp, send resp without qos.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
30935,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[181].SBP_DISABLE_IMCSMS_WAIT_CNF_TIMER_FOR_MT_SMS,modem_sbp_config[181].SBP_DISABLE_IMCSMS_WAIT_CNF_TIMER_FOR_MT_SMS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Control IMCSMS wait confirmation timer for MT SMS<BR>bit 0:0:Disable. remove Wait CNF timer for MT SMS over IMS<BR>bit 1:1:Enabled. Apply wait CNF timer for MT SMS over IMS<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
30974,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[180].SBP_AFR_SKIP_4G5_UNDER_5G_SHARE_4G_HOME_IP_CONTINUITY_PROBLEM,modem_sbp_config[180].SBP_AFR_SKIP_4G5_UNDER_5G_SHARE_4G_HOME_IP_CONTINUITY_PROBLEM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>SKIP AFR 4G5 DUE TO 5G4 IR IP PROBLEM<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00<BR>0<BR>0<BR>0<BR>0<BR>0<BR>0<BR>0<BR>0<BR>0<BR>0<BR>0<BR>0,NR15.R3.MD700.IVT.MP1MR3.MP,,0<BR>1<BR>1:Enabled<BR>1<BR>1<BR>1<BR>0:Disabled<BR>0<BR>0,,,,Auto Fast Return for NR,OP Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Pass,,,,
-31132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_BAND66_UL_EARFCN_CUSTOMIZATION_FOR_US_AND_NON_US_OPERATORS,modem_sbp_config[179].SBP_BAND66_UL_EARFCN_CUSTOMIZATION_FOR_US_AND_NON_US_OPERATORS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable partial bands setting under for US and NON-US mcc.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+31132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_BAND66_UL_EARFCN_CUSTOMIZATION_FOR_US_AND_NON_US_OPERATORS,modem_sbp_config[179].SBP_BAND66_UL_EARFCN_CUSTOMIZATION_FOR_US_AND_NON_US_OPERATORS,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Enable partial bands setting under for US and NON-US mcc.<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,"Try attach the device on B66.<BR>UE should attach on UL1740 irrespective of the BW configured BW<BR>It should not attach on UL1750 with BW 20MHz,<BR>UE should not attach on UL1760, UL1770 irrespective of the BW configured BW",Untested,,,,
31135,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_text_rtcp,imc_config.not_acquire_text_rtcp,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine (Y/N) Y, depend on NW setting, text call, and no text RTCP info in text dedicated bearer<BR>Test Time (minutes): NA<BR>[Init] no text RTCP info in text dedicated bearer, enable not_acquire_text_rtcp<BR>[Test Step]<BR>text call could establish success when enable this feature and will fail when disable this feature.<BR>[Expected Result]<BR>text call could establish success when enable this feature and will fail when disable this feature.",Untested,,,,
31136,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_text_rtcp.not_acquire_text_rtcp,imc_config.not_acquire_text_rtcp.not_acquire_text_rtcp,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>Check packet filter for audio text or not<BR>bit 0:0:Need to check<BR>bit 1:1:Not to check<BR>,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,"Test in machine (Y/N) Y, depend on NW setting, text call, and no text RTCP info in text dedicated bearer<BR>Test Time (minutes): NA<BR>[Init] no text RTCP info in text dedicated bearer, enable not_acquire_text_rtcp<BR>[Test Step]<BR>text call could establish success when enable this feature and will fail when disable this feature.<BR>[Expected Result]<BR>text call could establish success when enable this feature and will fail when disable this feature.",Untested,,,,
31287,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[180].SBP_NWSEL_IVSR_DO_NOT_SEARCH_REJECTED_RAT_FIRST,modem_sbp_config[180].SBP_NWSEL_IVSR_DO_NOT_SEARCH_REJECTED_RAT_FIRST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Do not search rejected RAT first for IVSR<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-31299,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[169].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,modem_sbp_data_config[169].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Controls Local Release mechanism to enable 5G SA after VoWIFI call ends<BR>bit 0:0:0: No Local Release<BR>bit 1:1:1: Local release only<BR>bit 2:2:2: Local release + NR Search<BR>",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+31299,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[169].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,modem_sbp_data_config[169].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>Controls Local Release mechanism to enable 5G SA after VoWIFI call ends<BR>bit 0:0:0: No Local Release<BR>bit 1:1:1: Local release only<BR>bit 2:2:2: Local release + NR Search",BIT,8,,8,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0-2,,,,MiA (Modem intelligence agent),MiA,,,"[Init]<BR>5G NW should be available.<BR>[Steps]<BR>1. UE is 4G attached.<BR>2. Make a call.<BR>3. Change 4G->VoWIFI<BR>4.Disable WIFI.<BR><BR>[Expected Result]<BR>At step 3, UE should disable NR and at the end of step 4,it should enable NR and latch 5G successfully",Untested,,,,
31394,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[180].SBP_NRRC_EE_DOS_SOLUTION,modem_sbp_config[180].SBP_NRRC_EE_DOS_SOLUTION,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Use NVRAM to record EE cell candidate when connection setup. When gracefully release will delete EE cell candiddate. If EE happened, for next round cell selection/reselection proecess. The EE cell will be treated as bar cell.<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,1,,,,MD Config,Modem - Customer Requirement,,,"Test in machine (Y)<BR> Test Time (3 minutes)<BR> [Init]<BR>0. Set up 2 different cells(cell1, cell2).(Please write down cell info for each cell)<BR> [Test Step]<BR>1. Power up UE.<BR>2. UE camp on cell1 and setup connection.<BR>3. Use Malform RRC setup to create UE EE <BR>4. Reboot UE and setup connection. <BR> [Expected Result]<BR>UE can not camp on Cell1.",Pass,,,,
31399,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[179].SBP_ERRC_IGNORE_PLMN_WHEN_BAND_MISMATCH_WITH_UNSUPPORTED_BAND,modem_sbp_config[179].SBP_ERRC_IGNORE_PLMN_WHEN_BAND_MISMATCH_WITH_UNSUPPORTED_BAND,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable icmp ping DL traffic <BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
31421,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[181].SBP_UE_NOT_RETRY_SR_AFTER_SR_REJECT_CONGESTION_WO_T3346,modem_sbp_config[181].SBP_UE_NOT_RETRY_SR_AFTER_SR_REJECT_CONGESTION_WO_T3346,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Retry SR after SR Rej with #22 w/o T3346.<BR>bit 0:0:Retry SR<BR>bit 1:1:Not retry SR<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,,,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
diff --git "a/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak" "b/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
index d885d6d..554d322 100644
--- "a/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
+++ "b/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
@@ -3191,10 +3191,10 @@
HW_VER = MOBILETEK2735_IVT_T800_V1_HW
-ORIGINAL_VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P1
+ORIGINAL_VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P2
-VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P1.T800.L1.240604.240828
-CUSTOMER_LABEL = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6_MOBILETEK2735.IVT.T800.V1_P1
+VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P2.T800.L1.240604.240828
+CUSTOMER_LABEL = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6_MOBILETEK2735.IVT.T800.V1_P2
# *************************************************************************
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1.EDB b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1.EDB
deleted file mode 100644
index eb45a8e..0000000
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1.EDB
+++ /dev/null
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2.EDB b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2.EDB
new file mode 100644
index 0000000..5c83430
--- /dev/null
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2.EDB
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1.EDB.check b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1.EDB.check
deleted file mode 100644
index 0c7322e..0000000
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1.EDB.check
+++ /dev/null
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2.EDB.check b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2.EDB.check
new file mode 100644
index 0000000..879902e
--- /dev/null
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2.EDB.check
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
index e010545..a269a08 100755
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
index 8596bc5..487ed46 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
index 8e59733..57b4123 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1_2024_01_28_17_41 b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2_2024_08_14_16_14
similarity index 98%
rename from mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1_2024_01_28_17_41
rename to mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2_2024_08_14_16_14
index ef7b4f0..c14b9eb 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P1_2024_01_28_17_41
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P2_2024_08_14_16_14
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
index b79964e..a5f4b87 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
Binary files differ