[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P9.T800.L1.240604.241205
MTK modem version: MOLY01520922_AUTO00350385(For_MOBILETEK2735_IVT_T800_V1_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P9).tar.gz
RF modem version: L805A/l1_CN_N79_240813.zip
Change-Id: I16293f93ca11c296481a540cb9b71a7ab5c05093
diff --git a/PatchList_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P9.xls b/PatchList_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P9.xls
new file mode 100644
index 0000000..7b5676c
--- /dev/null
+++ b/PatchList_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P9.xls
Binary files differ
diff --git a/mcu/custom/service/mcf/system_files/mcf_system.csv b/mcu/custom/service/mcf/system_files/mcf_system.csv
index 3d72908..6dbc730 100644
--- a/mcu/custom/service/mcf/system_files/mcf_system.csv
+++ b/mcu/custom/service/mcf/system_files/mcf_system.csv
@@ -1309,17 +1309,17 @@
1316,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_re_reg_base_timer,imc_config.auto_re_reg_base_timer,OTA and OTA BY OP,no,no,no,no,"Followed by RFC5626 4.5 Flow Recovery. W = min (max_time, (base_time *(2 ^ consecutive-failures))).<BR>unit: ms<BR>",UNSIGNED INT,4,,,30000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,prerequiste: simulate NW to reply error response(e.g 404) to REGISTER<BR>steps: IMS registration<BR>=> check if 1st IMS registration retry interval is auto_re_reg_base_timer,Untested,,,,
1317,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_re_reg_max_timer,imc_config.auto_re_reg_max_timer,OTA and OTA BY OP,no,no,no,no,"Followed by RFC5626 4.5 Flow Recovery. W = min (max_time, (base_time *(2 ^ consecutive-failures))).<BR>unit: ms<BR>",UNSIGNED INT,4,,,1800000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,prerequiste: simulate NW to reply error response(e.g 404) to REGISTER<BR>steps: IMS registration<BR>=> check if longest IMS registration retry interval is auto_re_reg_max_timer,Untested,,,,
1318,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_re_reg_timer,imc_config.auto_re_reg_timer,OTA and OTA BY OP,no,no,no,no,A timer to guarantee UE would re-register to IMS whenever entering IMS un-registered state. <BR>unit: ms<BR>,UNSIGNED INT,4,,,5000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Test Step] NW disconnect<BR>[Expected Result] <BR>UE will retry IMS register with setting timer,Untested,,,,
-1319,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",bearer_matching_preference,imc_config.bearer_matching_preference,OTA and OTA BY OP,no,no,no,no,Control Qos PF matching if with different bearer<BR>0:Prefer to check packet filter<BR>1:Prefer to check QoS<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Prefer to check packet filter<BR>1:Prefer to check QoS,,,,IMS,IMS,,,,Untested,,,,
+1319,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",bearer_matching_preference,imc_config.bearer_matching_preference,OTA and OTA BY OP,no,no,no,no,Control Qos PF matching if with different bearer<BR>0:disable<BR>1:Prefer to check packet filter<BR>2:Prefer to check QoS<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Prefer to check packet filter<BR>1:Prefer to check QoS,,,,IMS,IMS,,,,Untested,,,,
1320,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",bearer_matching_preference.bearer_matching_preference,imc_config.bearer_matching_preference.bearer_matching_preference,Not Support,no,no,no,no,[MCF]Control Qos PF matching if with different bearerbit 0:0:Prefer to check packet filterbit 1:1:Prefer to check QoS,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1321,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_nw_im_cn_signaling_flag,imc_config.check_nw_im_cn_signaling_flag,Not Support,no,yes,no,no,Deprecated.<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1322,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",clock_seq,imc_config.clock_seq,Not Support,no,no,no,no,,UNSIGNED SHORT,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1323,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dedicated_fallback_support,imc_config.dedicated_fallback_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Allow to use existing dedicated EPS bearer to send RTP/RTCP without waiting for NW<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
+1323,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dedicated_fallback_support,imc_config.dedicated_fallback_support,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1324,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dedicated_fallback_support.dedicated_fallback_support,imc_config.dedicated_fallback_support.dedicated_fallback_support,Not Support,no,no,no,no,[MCF]Allow to use existing dedicated EPS bearer to send RTP/RTCP without waiting for NWbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1325,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_fallback_support,imc_config.default_fallback_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Allow to use default EPS bearer to send RTP/RTCP<BR>0:Disable<BR>1:Enable. IMS Call will continue without dedicated bearer<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW does not issue voice dedicated bearer for VoLTE Call<BR>[Test Step] make VoLTE call<BR>[Expected Result] <BR> disable: volte call failed and CSFB<BR> enable: volte call success with default bearer only,Pass,,,,
+1325,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_fallback_support,imc_config.default_fallback_support,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW does not issue voice dedicated bearer for VoLTE Call<BR>[Test Step] make VoLTE call<BR>[Expected Result] <BR> disable: volte call failed and CSFB<BR> enable: volte call success with default bearer only,Pass,,,,
1326,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_fallback_support.defailt_fallback_support,imc_config.default_fallback_support.defailt_fallback_support,Not Support,no,no,no,no,[MCF]Allow to use default EPS bearer to send RTP/RTCPbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1327,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_pcscf_address_is_v4,imc_config.default_pcscf_address_is_v4,Not Support,no,yes,no,no, Deprecated<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1328,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_psismsc,imc_config.default_psismsc,OTA and OTA BY OP,no,no,no,no,Allow user to set psismsc manually.<BR>,STRING,64,64,,"sip:smsc@ims.mnc001.mcc001.3gppnetwork.org",NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] no available PSISMSC from SIM,<BR>[Test Step]<BR>1. IMS register<BR>2. send SMS<BR>[Expected Result]<BR>SMS success with setting",Pass,,,,
-1329,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_defer_pdn_release_timer,imc_config.dereg_defer_pdn_release_timer,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Defer UE initiated IMS PDN connection release in LTE for giving the NW a chance to release the connection first. <BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1329,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_defer_pdn_release_timer,imc_config.dereg_defer_pdn_release_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1330,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",detach_reattach_backoff_timer,imc_config.detach_reattach_backoff_timer,OTA and OTA BY OP,no,no,no,no,A timer to wait for Ims registration to get successful after DEATTACH REATTACH Scenario<BR>,UNSIGNED INT,4,,,15000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,NA,IMS,IMS,,,"need network support. After Ims call ends, Fake A2 should be triggered",Pass,,,,
1331,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_isim_application,imc_config.disable_isim_application,OTA and OTA BY OP,no,no,no,no,Disable ISIM application during IMS registration for some reason such as ISIM is valid while the parameter is wrong<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,[Init] set disable_isim_application = 1<BR>[Test Step]<BR>1. IMS register<BR>[Expected Result]<BR>check from/to header is using IMSI like string generate from USIM,Pass,,,,
1332,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",disable_isim_application.disable_isim_application,imc_config.disable_isim_application.disable_isim_application,Not Support,no,no,no,no,[MCF]Disable ISIM application during IMS registration for some reason such as ISIM is valid while the parameter is wrongbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1331,13 +1331,13 @@
1338,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_pdn_retain_timer,imc_config.emergency_pdn_retain_timer,OTA and OTA BY OP,no,no,no,no,"Emergency pdn establishment max waiting time which mentions the time to wait for PDN bearer establishment from NW when requested for emergency PDN. <BR>10000 , UE will start a 10sec timer waiting for E-PDN setup. And UE will drop IMS emergency call when timer expired (try other call domain if possible)<BR>unit: ms<BR>",UNSIGNED INT,4,,,10000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] Camp on 4G ready to activate IMS PDN<BR>[Special Condition] NW will not response E-PDN<BR>[Test Step] UE make emergency call over IMS<BR>[Expected Result] <BR> with default value (10sec): UE will abort E-PDN activation after 10sec and try emergency call on next RAT.<BR> config to 3sec : UE will abort E-PDN activation after 3sec and try emergency call on next RAT.,Pass,,,,
1339,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_reg_retain_timer,imc_config.emergency_reg_retain_timer,OTA and OTA BY OP,no,no,no,no,Timer for triggering emergency IMS dereg after ECC hang-up. The parameter is dependent to allow_emergency_dereg. <BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] set allow_emergency_dereg = 1<BR>[Test Step]<BR>1. E-911 on LTE<BR>2. handup call<BR>[Expected Result]<BR>E-PDN will be deactived immediatelly(default: 0),Untested,,,,
1340,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",empty_pcscf_list_fail_cause,imc_config.empty_pcscf_list_fail_cause,Not Support,no,yes,no,no,"When UE received empty pcscf list PDN, modify the cause to notify IMS register control module, modify to 18 could block retry registration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-1341,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_audio_precondition,imc_config.enable_audio_precondition,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>UE will check audio precondition value for resource allocation. If with precondition case, we will drop call if BW allocation failure, if without precondition cases, we will fallback to default if BW allocatoin failure.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
+1341,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_audio_precondition,imc_config.enable_audio_precondition,OTA and OTA BY OP,no,no,no,no,,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1342,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_audio_precondition.enable_audio_precondition,imc_config.enable_audio_precondition.enable_audio_precondition,Not Support,no,no,no,no,"[MCF]UE will check audio precondition value for resource allocation. If with precondition case, we will drop call if BW allocation failure, if without precondition cases, we will fallback to default if BW allocatoin failure.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1343,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_ddd_feature,imc_config.enable_ddd_feature,OTA and OTA BY OP,no,no,no,no,DDD(called number transfer(add country code or area code)) feature switch<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"Test in machine: N<BR>Test time: NA<BR>[Init]: insert Vivo/Brazil SIM card, register IMS<BR>[Test Step]: <BR> 1. Enable VoLTE on DUT;<BR> 2. STK > More Services > Recarga e MAIS > Vivo DDD > Enable the service;<BR> 3. Phone > Settings > Call Accounts > Select Vivo SIMCard > Additional settings > Caller ID > Hide number;<BR> 4. Phone > Make a call to a long distance number;<BR> 5. Verify that the carrier Vivo DDD (15) is not being insert in the call.<BR><BR>[Expected Result]<BR> Verify that the carrier Vivo DDD (15) is not being insert in the call.",Pass,,,,
1344,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_ddd_feature.enable_ddd_feature,imc_config.enable_ddd_feature.enable_ddd_feature,Not Support,no,no,no,no,[MCF]DDD(called number transfer(add country code or area code)) feature switchbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1345,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_video_precondition,imc_config.enable_video_precondition,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>UE will check video precondition value for resource allocation. If with precondition case, we will drop call if BW allocation failure, if without precondition cases, we will fallback to default if BW allocatoin failure.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
+1345,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_video_precondition,imc_config.enable_video_precondition,OTA and OTA BY OP,no,no,no,no,,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1346,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_video_precondition.enable_video_precondition,imc_config.enable_video_precondition.enable_video_precondition,Not Support,no,no,no,no,"[MCF]UE will check video precondition value for resource allocation. If with precondition case, we will drop call if BW allocation failure, if without precondition cases, we will fallback to default if BW allocatoin failure.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1347,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ext_timer_config,imc_config.ext_timer_config,Not Support,no,yes,no,no,module internal config<BR>,STRING,8,2,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1347,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ext_timer_config,imc_config.ext_timer_config,Not Support,no,yes,no,no,,STRING,8,2,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1348,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",force_user_account_by_manual,imc_config.force_user_account_by_manual,Not Support,no,yes,no,no, Deprecated<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1349,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",home_detected_emergency_call_support,imc_config.home_detected_emergency_call_support,Not Support,no,yes,no,no,Deprecated<BR>,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1350,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",icsi_resource_allocation_mode_1,imc_config.icsi_resource_allocation_mode_1,Not Support,no,yes,no,no,Deprecated.<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
@@ -1358,7 +1358,7 @@
1365,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qci_check.b7,imc_config.ignore_media_qci_check.b7,Not Support,no,no,no,no,[MCF]Bitmask to check voice/video/text QCI which assiged by NWIgnore video QCI in NON-3GPP HPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=6<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xf22): volte call failed, CSFB<BR> config to 0xf23 : volte call success",Pass,,,,
1366,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qci_check.b8,imc_config.ignore_media_qci_check.b8,Not Support,no,no,no,no,[MCF]Bitmask to check voice/video/text QCI which assiged by NWIgnore video QCI in NON-3GPP VPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=6<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xf22): volte call failed, CSFB<BR> config to 0xf23 : volte call success",Pass,,,,
1367,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qci_check.b9,imc_config.ignore_media_qci_check.b9,OTA and OTA BY OP,no,no,no,no,[MCF]Bitmask to check voice/video/text QCI which assiged by NWIgnore text QCI in 3GPP HPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=6<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xf22): volte call failed, CSFB<BR> config to 0xf23 : volte call success",Pass,,,,
-1368,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qos_check,imc_config.ignore_media_qos_check,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If this flag is set to TRUE, the check for bandwidth that is allocated from NW and required by UE is not performed.<BR>b0: Ignore audio QoS in 3GPP HPLMN<BR>b1: Ignore audio QoS in 3GPP VPLMN<BR>b2: Ignore audio QoS in NON-3GPP HPLMN<BR>b3: Ignore audio QoS in NON-3GPP VPLMN<BR>b4: Ignore video QoS in 3GPP HPLMN<BR>b5: Ignore video QoS in 3GPP VPLMN<BR>b6: Ignore video QoS in NON-3GPP HPLMN<BR>b7: Ignore video QoS in NON-3GPP VPLMN<BR>b8: Ignore text QoS in 3GPP HPLMN<BR>b9: Ignore text QoS in 3GPP VPLMN<BR>b10: Ignore text QoS in NON-3GPP HPLMN<BR>b11: Ignore text QoS in NON-3GPP VPLMN<BR>b12-b31: reserved <BR>",UNSIGNED INT,4,,,0xfff,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:Ignore audio QoS in 3GPP VPLMN<BR>b2:Ignore audio QoS in NON<BR>b3:Ignore audio QoS in NON<BR>b4:Ignore video QoS in 3GPP HPLMN<BR>b5:Ignore video QoS in 3GPP VPLMN<BR>b6:Ignore video QoS in NON<BR>b7:Ignore video QoS in NON<BR>b8:Ignore text QoS in 3GPP HPLMN<BR>b9:Ignore text QoS in 3GPP VPLMN<BR>b10:Ignore text QoS in NON<BR>b11:Ignore text QoS in NON<BR>b0:Ignore audio QoS in 3GPP HPLMN,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=1 and insufficient bandwidth.<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xfff): volte call success<BR> config to 0xffe : with strict cheching on QoS, volte call failed, CSFB",Pass,,,,
+1368,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qos_check,imc_config.ignore_media_qos_check,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0xfff,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:Ignore audio QoS in 3GPP VPLMN<BR>b2:Ignore audio QoS in NON<BR>b3:Ignore audio QoS in NON<BR>b4:Ignore video QoS in 3GPP HPLMN<BR>b5:Ignore video QoS in 3GPP VPLMN<BR>b6:Ignore video QoS in NON<BR>b7:Ignore video QoS in NON<BR>b8:Ignore text QoS in 3GPP HPLMN<BR>b9:Ignore text QoS in 3GPP VPLMN<BR>b10:Ignore text QoS in NON<BR>b11:Ignore text QoS in NON<BR>b0:Ignore audio QoS in 3GPP HPLMN,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=1 and insufficient bandwidth.<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xfff): volte call success<BR> config to 0xffe : with strict cheching on QoS, volte call failed, CSFB",Pass,,,,
1369,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qos_check.b1,imc_config.ignore_media_qos_check.b1,OTA and OTA BY OP,no,no,no,no,[MCF]Bitmask to check voice/video/text QoS parameter which assiged by NWIgnore audio QoS in 3GPP HPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=1 and insufficient bandwidth.<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xfff): volte call success<BR> config to 0xffe : with strict cheching on QoS, volte call failed, CSFB",Pass,,,,
1370,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qos_check.b10,imc_config.ignore_media_qos_check.b10,OTA and OTA BY OP,no,no,no,no,[MCF]Bitmask to check voice/video/text QoS parameter which assiged by NWIgnore text QoS in 3GPP VPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=1 and insufficient bandwidth.<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xfff): volte call success<BR> config to 0xffe : with strict cheching on QoS, volte call failed, CSFB",Pass,,,,
1371,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_media_qos_check.b11,imc_config.ignore_media_qos_check.b11,OTA and OTA BY OP,no,no,no,no,[MCF]Bitmask to check voice/video/text QoS parameter which assiged by NWIgnore text QoS in NON-3GPP HPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] IMS Register on 4G, home network<BR>[Special condition] NW issue a audio dedicated bearer with QCI=1 and insufficient bandwidth.<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (0xfff): volte call success<BR> config to 0xffe : with strict cheching on QoS, volte call failed, CSFB",Pass,,,,
@@ -1378,11 +1378,11 @@
1385,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_sgn_qci_check.b3,imc_config.ignore_sgn_qci_check.b3,Not Support,no,no,no,no,[MCF]Bitmask to check for signaling QCI of NW assigedIgnore QCI in NON-3GPP HPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] attach to LTE home network<BR>[Special Condition] NW activate a IMS PDN with QCI=9<BR>[Test Step] wait for 30 sec<BR>[Expected Result] <BR> with default value (0x2) : UE will not register on IMS<BR> config to 0x7 : UE will register on IMS,Pass,,,,
1386,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_sgn_qci_check.b4,imc_config.ignore_sgn_qci_check.b4,Not Support,no,no,no,no,[MCF]Bitmask to check for signaling QCI of NW assigedIgnore QCI in NON-3GPP VPLMN,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] attach to LTE home network<BR>[Special Condition] NW activate a IMS PDN with QCI=9<BR>[Test Step] wait for 30 sec<BR>[Expected Result] <BR> with default value (0x2) : UE will not register on IMS<BR> config to 0x7 : UE will register on IMS,Pass,,,,
1387,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_sgn_qci_check.b5,imc_config.ignore_sgn_qci_check.b5,Not Support,no,no,no,no,[MCF]Bitmask to check for signaling QCI of NW assigedReserved,BIT,4,,4,0x0f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] attach to LTE home network<BR>[Special Condition] NW activate a IMS PDN with QCI=9<BR>[Test Step] wait for 30 sec<BR>[Expected Result] <BR> with default value (0x2) : UE will not register on IMS<BR> config to 0x7 : UE will register on IMS,Pass,,,,
-1388,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",imcb_setting_string,imc_config.imcb_setting_string,Not Support,no,yes,no,no, Deprecated<BR>,STRING,64,64,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1388,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",imcb_setting_string,imc_config.imcb_setting_string,Not Support,no,yes,no,no,,STRING,64,64,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1389,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",impu_change_dereg,imc_config.impu_change_dereg,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>NW modify SIM parameter and lead impu change, wether need ims dereg and then re-reg<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,""NW will update IMPU,<BR>and UE should dereg IMS then restart reg at IMS, thus need NW support this feature can UE test this case"",Pass,,,,
1390,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",impu_change_dereg.impu_change_dereg,imc_config.impu_change_dereg.impu_change_dereg,Not Support,no,no,no,no,"[MCF]NW modify SIM parameter and lead impu change, wether need ims dereg and then re-regbit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1391,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ims_estab_timer,imc_config.ims_estab_timer,Not Support,no,yes,no,no,Timer start from a new IMS registration is initiated<BR>,UNSIGNED CHAR,1,,,120,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] power on<BR>[Test Step] IMS registration when NW did not response<BR>[Expected Result] after timeout, check AT+EITMR=x,x,x to lower layer<BR>note: This only enable in special operator",Untested,,,,
-1392,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ims_progress_slow_timer,imc_config.ims_progress_slow_timer,OTA and OTA BY OP,no,no,no,no,An interval to measure if PDN establishment or IMS registration takes longer time.<BR>unit: sec<BR>,UNSIGNED INT,4,,,2,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,NA,Pass,,,,
+1392,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ims_progress_slow_timer,imc_config.ims_progress_slow_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,2,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,NA,Pass,,,,
1393,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ims_reg_allowed_at_23g,imc_config.ims_reg_allowed_at_23g,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Allow UE to trigger IMS registration at 23G<BR>0:Not allowed<BR>1:Allowed and won't trigger IMS deregration while HO from 4G to 23G<BR>2:Not allowed IMS registration at 23G and also not trigger IMS deregration when HO from 4G to 23G<BR>3:Allow IMS registration in 3G only<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Allowed and won<BR>2:Not allowed IMS registration at 23G and also not trigger IMS deregration when HO from 4G to 23G<BR>3:Allow IMS registration in 3G only<BR>0:Not allowed,,,,IMS,IMS,,,[Init] IMS register on 4G<BR>[Test Step]<BR>move to 3G<BR>[Expected Result]<BR>0:Not allowed<BR>1:Allowed and won't trigger IMS deregration while HO from 4G to 23G<BR>2:Not allowed IMS registration at 23G and also not trigger IMS deregration when HO from 4G to 23G<BR>3:Allow IMS registration in 3G only,Pass,,,,
1394,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ims_reg_allowed_at_23g.ims_reg_allowed_at_23g,imc_config.ims_reg_allowed_at_23g.ims_reg_allowed_at_23g,Not Support,no,no,no,no,[MCF]Allow UE to trigger IMS registration at 23Gbit 0:0:Not allowedbit 1:1:allowed and won't trigger dereg while HO from 4G to 23Gbit 2:2:Not allowed to IMS registration at 23G but allowed HO from 4G to 23G,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1395,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ims_roaming_mode,imc_config.ims_roaming_mode,Not Support,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Define the device is IMS roaming capable device<BR>0:Non-VoLTE roaming capable device<BR>1:VoLTE roaming capable device<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] power on<BR>[Test Step]<BR>1. attach on roaming cell<BR>[Expected Result]<BR>0: IMS not registered on roaming cell<BR>1: IMS registered on roaming cell,Pass,,,,
@@ -1406,26 +1406,26 @@
1413,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mncmcc_whitelist,imc_config.mncmcc_whitelist,Not Support,no,yes,no,no, Deprecated<BR>,STRING,128,128,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1414,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",no_ims_reg_during_active_cs_call,imc_config.no_ims_reg_during_active_cs_call,OTA and OTA BY OP,no,no,no,no,Not register during a CS call<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] set no_ims_reg_during_active_cs_call = 1<BR>[Test Step] <BR>1. enable WIFI Calling<BR>2. make CS call<BR>3. enable WIFI AP<BR>[Expected Result] <BR>UE should not trigger WIFI register and will trigger IMS register on WIFI only when call end,Untested,,,,
1415,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",no_ims_reg_during_active_cs_call.no_ims_reg_during_active_cs_call,imc_config.no_ims_reg_during_active_cs_call.no_ims_reg_during_active_cs_call,Not Support,no,no,no,no,[MCF]Not register for WFC during a CS callbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1416,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",normal_pdn_retry_count,imc_config.normal_pdn_retry_count,Not Support,no,yes,no,no,module internal config<BR>,UNSIGNED CHAR,1,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-1417,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_audio_rtcp,imc_config.not_acquire_audio_rtcp,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Check packet filter for audio RTCP or not<BR>0:Need to check<BR>1:Not to check. IMS Call will continue without audio RTCP PF<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Need to check<BR>1:Not to check,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW issue a voice dedicated bearer without RTCP PF<BR>[Test Step] make volte call<BR>[Expected Result] <BR> disable: volte call failed (CSFB)<BR> enable: volte call success,Pass,,,,
+1416,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",normal_pdn_retry_count,imc_config.normal_pdn_retry_count,Not Support,no,yes,no,no,,UNSIGNED CHAR,1,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+1417,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_audio_rtcp,imc_config.not_acquire_audio_rtcp,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Need to check<BR>1:Not to check,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW issue a voice dedicated bearer without RTCP PF<BR>[Test Step] make volte call<BR>[Expected Result] <BR> disable: volte call failed (CSFB)<BR> enable: volte call success,Pass,,,,
1418,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_audio_rtcp.not_acquire_audio_rtcp,imc_config.not_acquire_audio_rtcp.not_acquire_audio_rtcp,Not Support,no,no,no,no,[MCF]Check packet filter for audio RTCP or notbit 0:0:Need to checkbit 1:1:Not to check,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1419,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_video_rtcp,imc_config.not_acquire_video_rtcp,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Check packet filter for video RTCP or not<BR>0:Need to check<BR>1:Not to check. IMS Call will continue without video RTCP PF<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Need to check<BR>1:Not to check,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Special condition] NW issue a video dedicated bearer without RTCP PF<BR>[Test Step] make vilte call<BR>[Expected Result] <BR> disable: vilte call failed, downgrade to volte<BR> enable: vilte call success",Pass,,,,
+1419,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_video_rtcp,imc_config.not_acquire_video_rtcp,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Need to check<BR>1:Not to check,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Special condition] NW issue a video dedicated bearer without RTCP PF<BR>[Test Step] make vilte call<BR>[Expected Result] <BR> disable: vilte call failed, downgrade to volte<BR> enable: vilte call success",Pass,,,,
1420,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_acquire_video_rtcp.not_acquire_video_rtcp,imc_config.not_acquire_video_rtcp.not_acquire_video_rtcp,Not Support,no,no,no,no,[MCF]Check packet filter for video RTCP or notbit 0:0:Need to checkbit 1:1:Not to check,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1421,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_decouple_dereg_and_pdn_deact,imc_config.not_decouple_dereg_and_pdn_deact,Not Support,no,no,no,no,Default on.<BR>0:Decouple SIP dereg and PDN deactivation<BR>1:Not decouple SIP dereg and PDN deactivation<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Decouple SIP dereg and PDN deactivation<BR>1:Not decouple SIP dereg and PDN deactivation,,,,IMS,IMS,,,,Untested,,,,
+1421,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_decouple_dereg_and_pdn_deact,imc_config.not_decouple_dereg_and_pdn_deact,Not Support,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Decouple SIP dereg and PDN deactivation<BR>1:Not decouple SIP dereg and PDN deactivation,,,,IMS,IMS,,,,Untested,,,,
1422,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_decouple_dereg_and_pdn_deact.not_decouple_dereg_and_pdn_deact,imc_config.not_decouple_dereg_and_pdn_deact.not_decouple_dereg_and_pdn_deact,Not Support,no,no,no,no,[MCF]Decoupling SIP dereg and PDN deact to make PDN deact non-blocking from dereg_indbit 0:0:Decouple SIP dereg and PDN deactivationbit 1:1:Not decouple SIP dereg and PDN deactivation,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1423,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nw_vops_rule,imc_config.nw_vops_rule,OTA and OTA BY OP,no,no,no,no,"Configuration option for IMS registration to follow IMS voice over PS session indicator (VoPS) received from NW.<BR>b0:Don't care<BR>b1:Not to register to IMS, deregister if IMS registration exist<BR>b2:Not to register to IMS, deregister only after the call is released<BR>b3:Not to register to IMS, maintain IMS registration regardless if VoPS=True is sent from NW<BR>b4:Not to register to IMS, deregister if IMS registration exist in VPLMN<BR>",UNSIGNED CHAR,1,,,0x11,NR15.R3.MD700.IVT.MP1MR3.MP,,"b0:Don<BR>b1:Not to register to IMS, deregister if IMS registration exist<BR>b2:Not to register to IMS, deregister only after the call is released<BR>b3:Not to register to IMS, maintain IMS registration regardless if VoPS<BR>b4:Not to register to IMS, deregister if IMS registration exist in VPLMN",,,,IMS,IMS,,,[Init] power on<BR>[Test Step] attach on 4G vops off cell<BR>[Expected Result]<BR>If value is 0: IMS registration succesful<BR> value is 1: no IMS registration,Pass,,,,
1424,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nw_vops_rule.nw_vops_rule,imc_config.nw_vops_rule.nw_vops_rule,Not Support,no,no,no,no,"[MCF]Configuration option for IMS registration to follow IMS voice over PS session indicator (VoPS) received from NW.bit 0:0:Don't carebit 1:1:Not to register to IMS, deregister if IMS registration existbit 2:2:Not to register to IMS, deregister only after the call is releasedbit 3:3:Not to register to IMS, maintain IMS registration regardless if VoPS=True is sent from NWbit 4:4:Not to register to IMS, deregister if IMS registration exist in VPLMN",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1425,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",open_volte_cc,imc_config.open_volte_cc,OTA and OTA BY OP,no,yes,no,no,Volte CC(one feature about how to try IMS PDN reject cause) feature switch<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
1426,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pad,imc_config.pad,Not Support,no,no,no,no,,UNSIGNED CHAR,2,2,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1427,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_home_policy_list,imc_config.pcscf_home_policy_list,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>This gives the P-CSCF discovery method list in priority in home network. <BR>"0,2,1,4,5,3,6,0": Meaning the P-CSCF choosing priority in home domain is PCO, DHCP, MO, MANUAL, SIM.<BR>---<BR>1: DHCP<BR>2: PCO<BR>3: SIM<BR>4: MO<BR>5: MANUAL<BR>6: SIM<BR>String format<BR>Length: 32 bytes<BR>",STRING,32,32,,""0,2,1,4,5,3,6,0"",NR15.R3.MD700.IVT.MP1MR3.MP,,1:DHCP<BR>2:PCO<BR>3:SIM<BR>4:MO<BR>5:MANUAL<BR>6:SIM,,,,IMS,IMS,,,not support,Untested,,,,
+1427,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_home_policy_list,imc_config.pcscf_home_policy_list,OTA and OTA BY OP,no,no,no,no,,STRING,32,32,,""0,2,1,4,5,3,6,0"",NR15.R3.MD700.IVT.MP1MR3.MP,,1:DHCP<BR>2:PCO<BR>3:SIM<BR>4:MO<BR>5:MANUAL<BR>6:SIM,,,,IMS,IMS,,,not support,Untested,,,,
1428,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_manual_list,imc_config.pcscf_manual_list,Not Support,no,yes,no,no,Deprecated.<BR>,STRING,16,16,,"192.168.0.1",NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1429,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_manual_support,imc_config.pcscf_manual_support,Not Support,no,yes,no,no, Deprecated<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1430,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_mo_support,imc_config.pcscf_mo_support,Not Support,no,yes,no,no,Deprecated<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1431,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_pco_renew_support,imc_config.pcscf_pco_renew_support,Not Support,no,yes,no,no,Deprecated<BR>,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1432,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_priority_list,imc_config.pcscf_priority_list,Not Support,no,yes,no,no,Deprecated<BR>It was replaced by pcscf_home_policy_list/pcscf_visit_policy_list<BR>,STRING,8,8,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1433,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_sim_support,imc_config.pcscf_sim_support,Not Support,no,yes,no,no,Deprecated<BR>,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1434,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_visit_policy_list,imc_config.pcscf_visit_policy_list,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>This gives the P-CSCF discovery method list in priority in visit network. <BR>"0,2,1,4,5,3,6,0": Meaning the P-CSCF choosing priority for roaming case is PCO, DHCP, MO, MANUAL, SIM.<BR>---<BR>1: DHCP<BR>2: PCO<BR>3: SIM<BR>4: MO<BR>5: MANUAL<BR>6: SIM<BR>String format<BR>Length: 32 bytes<BR>",STRING,32,32,,""0,2,1,4,5,3,6,0"",NR15.R3.MD700.IVT.MP1MR3.MP,,1:DHCP<BR>2:PCO<BR>3:SIM<BR>4:MO<BR>5:MANUAL<BR>6:SIM,,,,IMS,IMS,,,not support,Untested,,,,
-1435,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pdn_rej_handle,imc_config.pdn_rej_handle,Not Support,no,no,no,no,Deprecated<BR>A string to illustrate IMS PDN reject cause handling.<BR>,UNSIGNED CHAR,64,64,,""N,*,0,1;E,*,0,1"",NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1434,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_visit_policy_list,imc_config.pcscf_visit_policy_list,OTA and OTA BY OP,no,no,no,no,,STRING,32,32,,""0,2,1,4,5,3,6,0"",NR15.R3.MD700.IVT.MP1MR3.MP,,1:DHCP<BR>2:PCO<BR>3:SIM<BR>4:MO<BR>5:MANUAL<BR>6:SIM,,,,IMS,IMS,,,not support,Untested,,,,
+1435,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pdn_rej_handle,imc_config.pdn_rej_handle,Not Support,no,no,no,no,,UNSIGNED CHAR,64,64,,""N,*,0,1;E,*,0,1"",NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1436,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pdn_retry_backoff_enable,imc_config.pdn_retry_backoff_enable,OTA and OTA BY OP,no,no,no,no,"MTK internal PDN retry backoff mechanism.<BR>[Related Configuration] pdn_retry_pre_backoff_count / pdn_retry_base_time / pdn_retry_max_time<BR>0:Disable<BR>1:Enable MTK internal PDN retry backoff mechanism<BR>Remark:<BR>pre_backoff_count: 2<BR>base_time: 10 sec<BR>max_time: 900 sec<BR>IMS PDN retry interval will be 10sec , 10sec , 10sec , 20sec , 40sec , 80sec , , 900sec<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable MTK internal PDN retry backoff mechanism,,,,IMS,IMS,,,[Init] Camp on 4G ready to activate IMS PDN<BR>[Test Step] UE trigger IMS PDN connectivity request and NW rejected it.<BR>[Expected Result] <BR> enable: UE retry IMS PDN with a exponential backoff timer<BR> disable: UE retry IMS PDN after 1sec,Pass,,,,
1437,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pdn_retry_backoff_enable.pdn_retry_backoff_enable,imc_config.pdn_retry_backoff_enable.pdn_retry_backoff_enable,Not Support,no,no,no,no,[MCF]MTK internal PDN retry backoff mechanism.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1438,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pdn_retry_base_time,imc_config.pdn_retry_base_time,OTA and OTA BY OP,no,no,no,no,"MTK internal PDN retry backoff mechanism. Backoff retry base time. (backoff will be based_time*2^n). <BR>[Related Configuration] pdn_retry_pre_backoff_count / pdn_retry_max_time / pdn_retry_backoff_enable<BR>10: base_time: 10 sec<BR>Remark:<BR>pre_backoff_count: 2<BR>base_time: 10 sec<BR>max_time: 900 sec<BR>IMS PDN retry interval will be 10sec , 10sec , 10sec , 20sec , 40sec , 80sec , , 900sec<BR>unit: sec<BR>",UNSIGNED INT,4,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,10:base_time,,,,IMS,IMS,,,"[Init] Camp on 4G ready to activate IMS PDN<BR>[Test Step] UE trigger IMS PDN connectivity request and NW rejected it.<BR>[Expected Result] <BR> with default value = 1 UE retry IMS PDN with a exponential backoff timer as following period<BR> pre_backoff_count: 2<BR> base_time: 1 sec<BR> max_time: 900 sec<BR> IMS PDN retry interval will be 1sec , 1sec , 1sec , 2sec , 4sec , 8sec , , 900sec<BR> config to 10 : IMS PDN retry interval will be 10sec , 10sec , 10sec , 20sec , 40sec , 80sec , , 900sec",Pass,,,,
@@ -1433,37 +1433,37 @@
1440,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pdn_retry_pre_backoff_count,imc_config.pdn_retry_pre_backoff_count,OTA and OTA BY OP,no,no,no,no,"MTK internal PDN retry backoff mechanism. Intense retry count before backoff. (backoff will be based_time*2^n).<BR>[Related Configuration] pdn_retry_base_time / pdn_retry_max_time / pdn_retry_backoff_enable<BR>2: Intense retry count before backoff<BR>Remark:<BR>pre_backoff_count: 2<BR>base_time: 10 sec<BR>max_time: 900 sec<BR>IMS PDN retry interval will be 10sec , 10sec , 10sec , 20sec , 40sec , 80sec , , 900sec<BR>",UNSIGNED INT,4,,,3,NR15.R3.MD700.IVT.MP1MR3.MP,,2:Intense retry count before backoff,,,,IMS,IMS,,,"[Init] Camp on 4G ready to activate IMS PDN<BR>[Test Step] UE trigger IMS PDN connectivity request and NW rejected it.<BR>[Expected Result] <BR> with default value = 3: UE retry IMS PDN with a exponential backoff timer as following period<BR> pre_backoff_count: 2<BR> base_time: 10 sec<BR> max_time: 900 sec<BR> IMS PDN retry interval will be 10sec , 10sec , 10sec , 10sec , 20sec , 40sec , 80sec , , 900sec<BR> config to 2 : IMS PDN retry interval will be 10sec , 10sec , 10sec , 20sec , 40sec , 80sec , , 900sec",Pass,,,,
1441,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",poweroff_detach_timer,imc_config.poweroff_detach_timer,Not Support,no,yes,no,no, Deprecated.<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1442,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",poweroff_ims_dereg_timer,imc_config.poweroff_ims_dereg_timer,OTA and OTA BY OP,no,no,no,no,Guard timer to avoid SIP dereg takes too long. <BR>unit:s<BR>,UNSIGNED INT,4,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] set NW do not response PDN deact<BR>[Test Step]<BR>1. register on IMS<BR>2. enter flight mode<BR>[Expected Result]<BR>UE will enter flight mode after 5(default) sec,Untested,,,,
-1443,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_abnormal_dereg_report_timer,imc_config.reg_abnormal_dereg_report_timer,OTA and OTA BY OP,no,no,no,no,"Timer to control how long to report IMS de-registration event It should go with diagnostic tool, otherwise it will be invalid.<BR>3600000 ms<BR>Unit:ms<BR>",UNSIGNED INT,4,,,3600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,""[Init] reg_abnormal_dereg_report_timer = 30<BR>[Test Step] IMS registration, unplug SIM, plug SIM for 5 times<BR>[Expected Result] check ELT if the interval of each REG_ABNORMAL is greater than 30 seconds"",Untested,,,,
-1444,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_abnormal_reg_fail_report_timer,imc_config.reg_abnormal_reg_fail_report_timer,OTA and OTA BY OP,no,no,no,no,"Timer to control how long to report IMS registration failure event It should go with diagnostic tool, otherwise it will be invalid.<BR>3600000 ms<BR>Unit:ms<BR>",UNSIGNED INT,4,,,3600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] reg_abnormal_reg_fail_report_timer = 30, simulate NW reply 404 to REGISTER<BR>[Test Step] IMS registration for 5 minutes<BR>[Expected Result] check ELT if the interval of each REG_ABNORMAL is greater than 30 seconds",Untested,,,,
-1445,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_abnormal_reg_slow_report_timer,imc_config.reg_abnormal_reg_slow_report_timer,OTA and OTA BY OP,no,no,no,no,"Timer to control how long to report IMS registration slow event It should go with diagnostic tool, otherwise it will be invalid.<BR>3600000 ms<BR>Unit:ms<BR>",UNSIGNED INT,4,,,3600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] reg_abnormal_reg_slow_report_timer = 30<BR>[Test Step] IMS registration , enter flight mode, leave flight mode repeat 5 times<BR>[Expected Result] check ELT if the interval of each REG_ABNORMAL is greater than 30 seconds",Untested,,,,
+1443,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_abnormal_dereg_report_timer,imc_config.reg_abnormal_dereg_report_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,3600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,""[Init] reg_abnormal_dereg_report_timer = 30<BR>[Test Step] IMS registration, unplug SIM, plug SIM for 5 times<BR>[Expected Result] check ELT if the interval of each REG_ABNORMAL is greater than 30 seconds"",Untested,,,,
+1444,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_abnormal_reg_fail_report_timer,imc_config.reg_abnormal_reg_fail_report_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,3600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] reg_abnormal_reg_fail_report_timer = 30, simulate NW reply 404 to REGISTER<BR>[Test Step] IMS registration for 5 minutes<BR>[Expected Result] check ELT if the interval of each REG_ABNORMAL is greater than 30 seconds",Untested,,,,
+1445,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_abnormal_reg_slow_report_timer,imc_config.reg_abnormal_reg_slow_report_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,3600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] reg_abnormal_reg_slow_report_timer = 30<BR>[Test Step] IMS registration , enter flight mode, leave flight mode repeat 5 times<BR>[Expected Result] check ELT if the interval of each REG_ABNORMAL is greater than 30 seconds",Untested,,,,
1446,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rel_emc_pdn_afr_timer_expr,imc_config.rel_emc_pdn_afr_timer_expr,OTA and OTA BY OP,no,no,no,no,Control where release emergency PDN after timer expired flag.<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"if emergency registration fail , should keep emergency PDN for a period of time(300s) then can deactive emergency PDN, so simulate ECC with emergency registration fail case, to verify if UE mantian emergency PDN for 300s",Pass,,,,
1447,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rel_emc_pdn_afr_timer_expr.rel_emc_pdn_afr_timer_expr,imc_config.rel_emc_pdn_afr_timer_expr.rel_emc_pdn_afr_timer_expr,Not Support,no,no,no,no,[MCF]Control where release emergency PDN after timer expired flag.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1448,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rel_hps_threshold,imc_config.rel_hps_threshold,Not Support,no,yes,no,no,Internal design about lower layer RF control.<BR>Unit:sec<BR>,UNSIGNED INT,4,,,40,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1449,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reset_retry_after_timer_criteria,imc_config.reset_retry_after_timer_criteria,Not Support,no,no,no,no,0:Disable<BR>1:Criteria is IP Address change.<BR>2:Criteria is P-CSCF address not in PCO.<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Criteria is IP Address change<BR>2:Criteria is P,,,,IMS,IMS,,,,Untested,,,,
+1449,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reset_retry_after_timer_criteria,imc_config.reset_retry_after_timer_criteria,Not Support,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Criteria is IP Address change<BR>2:Criteria is P,,,,IMS,IMS,,,,Untested,,,,
1450,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reset_retry_after_timer_criteria.reset_retry_after_timer_criteria,imc_config.reset_retry_after_timer_criteria.reset_retry_after_timer_criteria,Not Support,no,no,no,no,[MCF]Reset retry after timer criteriabit 0:0:Disablebit 1:1:Criteria is IP Address change.bit 2:2:Criteria is P-CSCF address not in PCO.,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1451,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resource_allocation_mode,imc_config.resource_allocation_mode,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>TS24.167 ICSI_Resource_Allocation_Mode<BR>0:UE initial<BR>1:NW Initial<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE initial<BR>1:NW Initial,,,,IMS,IMS,,,,Untested,,,,
1452,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resource_allocation_mode.resource_allocation_mode,imc_config.resource_allocation_mode.resource_allocation_mode,Not Support,no,no,no,no,[MCF]TS24.167 ICSI_Resource_Allocation_Modebit 0:0:UE initialbit 1:1:NW Initial,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1453,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resource_retain_timer,imc_config.resource_retain_timer,OTA and OTA BY OP,no,no,no,no,"Dedicated EPS bearer reserve waiting timer while making a VoLTE call. <BR>3000 , UE will start a 3sec timer waiting for dedicated bearer after SIP negotiation. And UE will drop IMS call when timer expired (do CSFB if possible).<BR>unit: ms<BR>",UNSIGNED INT,4,,,3000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW delay to issue dedicated bearer (5sec after SIP 183)<BR>[Test Step] make volte call<BR>[Expected Result] <BR> with default value (3sec): volte call failed (CSFB)<BR> change config to 6 sec: volte call success,Pass,,,,
-1454,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",restore_pcscf,imc_config.restore_pcscf,Not Support,no,yes,no,no,RegUA will use pcscf_num and pcscf_usage to control the logic of choosing pcscf.<BR>operator specific.<BR>1. Restore failure pcscf to pcscf list<BR>2. Mark and indicate the status of entry in P-CSCF list<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1454,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",restore_pcscf,imc_config.restore_pcscf,Not Support,no,yes,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1455,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rfc5626_flow_recovery,imc_config.rfc5626_flow_recovery,OTA and OTA BY OP,no,no,no,no,This parameter is to enable or disable RFC5626 type of flow recovery mecanism<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,prerequiste: simulate NW to reply error response(e.g 404) to REGISTER<BR>steps: IMS registration<BR>=> check if UE triggers IMS registration retry according to rfc5626,Pass,,,,
1456,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rfc5626_flow_recovery.rfc5626_flow_recovery,imc_config.rfc5626_flow_recovery.rfc5626_flow_recovery,Not Support,no,no,no,no,[MCF]This parameter is to enable or disable RFC5626 type of flow recovery mecanismbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1457,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",send_sip_dereg_at_23g,imc_config.send_sip_dereg_at_23g,OTA and OTA BY OP,no,no,no,no,"This flag is used to control if SIP dereg message need to send to the network when Ims Deregistration is triggered due to the RAT change to 23G<BR>0:Do not send the SIP deregister, just do the local deregistration and tear down the IMS PDN<BR>1:Send the SIP deregister message<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Send the SIP deregister message<BR>1:Do not send the SIP deregister, just do the local deregistration and tear down the IMS PDN",,,,IMS,IMS,,,[Init] set send_sip_dereg_at_23g = 1<BR>[Test Step]<BR>1. register on LTE<BR>2. move to 2/3G<BR>[Expected Result]<BR>UE should not send SIP de-register and only tear down IMS PDN,Pass,,,,
+1457,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",send_sip_dereg_at_23g,imc_config.send_sip_dereg_at_23g,OTA and OTA BY OP,no,no,no,no,"This flag is used to control if SIP dereg message need to send to the network when Ims Deregistration is triggered due to the RAT change to 23G<BR>0:Send the SIP deregister message<BR>1:Do not send the SIP deregister, just do the local deregistration and tear down the IMS PDN<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Send the SIP deregister message<BR>1:Do not send the SIP deregister, just do the local deregistration and tear down the IMS PDN",,,,IMS,IMS,,,[Init] set send_sip_dereg_at_23g = 1<BR>[Test Step]<BR>1. register on LTE<BR>2. move to 2/3G<BR>[Expected Result]<BR>UE should not send SIP de-register and only tear down IMS PDN,Pass,,,,
1458,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",send_sip_dereg_at_23g.send_sip_dereg_at_23g,imc_config.send_sip_dereg_at_23g.send_sip_dereg_at_23g,Not Support,no,no,no,no,"[MCF]This flag is used to control if SIP dereg message need to send to the network when Ims Deregistration is triggered due to the RAT change to 23Gbit 0:0:Send the SIP deregister messagebit 1:1:Do not send the SIP deregister, just do the local deregistration and tear down the IMS PDN",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1459,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_pcscf_discovery_via_nas,imc_config.set_pcscf_discovery_via_nas,OTA and OTA BY OP,no,no,no,no,Enable/disable to set pcscf_discover_via_nas flag (AT+CGDCONT)<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1460,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_pcscf_discovery_via_nas.set_pcscf_discovery_via_nas,imc_config.set_pcscf_discovery_via_nas.set_pcscf_discovery_via_nas,Not Support,no,no,no,no,[MCF]Enable/disable to set pcscf_discover_via_nas flag (AT+CGDCONT)bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1461,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_ue_im_cn_signaling_flag,imc_config.set_ue_im_cn_signaling_flag,OTA and OTA BY OP,no,no,no,no,Enable/disable to set IM CN signaling flag (AT+CGDCONT)<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1462,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",set_ue_im_cn_signaling_flag.set_ue_im_cn_signaling_flag,imc_config.set_ue_im_cn_signaling_flag.set_ue_im_cn_signaling_flag,Not Support,no,no,no,no,[MCF]Enable/disable to set IM CN signaling flag (AT+CGDCONT)bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1463,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sgn_selection_weight,imc_config.sgn_selection_weight,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Configure the weight of qci match,signal_flag match and default bearer when bearer selected as sgn bearer, the first number is the weight of qci,the second number is the weight of signal_flag, the third number is the weight of default bearer. <BR>"4,2,1": for example,<BR>If we have a IMS default bearer with QCI=9 and sflag=TRUE, the total weight for this bearer will be 3. We will treat it as a signaling bearer.<BR>And if we got a dedicated bearer with QCI=5, the total weight for this bearer will be 4 (greater then default bearer). We will switch the signaling bearer to from default bearer to this dedicated bearer.<BR>Format:<BR>"[qci_match_weight],[signaling_flag_weight],[default_bearer_weight]"<BR>String format<BR>Length: 16 bytes<BR>",STRING,16,16,,""4,2,1"",NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1464,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",silent_deact,imc_config.silent_deact,Not Support,no,yes,no,no,module internal config<BR>---<BR>IMCB will not trigger PDN deact and self change state to BEARER_DEACTIVATED.<BR>(For specific operator with some specific SIP error)<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
-1465,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",silent_pdn_deact,imc_config.silent_pdn_deact,Not Support,no,yes,no,no, module internal config<BR>IMCB will not trigger PDN deact and self change state to BEARER_DEACTIVATED (for general usage)<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
+1463,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sgn_selection_weight,imc_config.sgn_selection_weight,OTA and OTA BY OP,no,no,no,no,,STRING,16,16,,""4,2,1"",NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1464,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",silent_deact,imc_config.silent_deact,Not Support,no,yes,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
+1465,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",silent_pdn_deact,imc_config.silent_pdn_deact,Not Support,no,yes,no,no,,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
1466,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_support,imc_config.sms_support,Not Support,no,yes,no,no,The configuration will be overwritten by AP config in runtime<BR>0:Not support<BR>1:Support<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not support<BR>1:Support,,,,,,,,,Untested,,,,
1467,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",srvcc_no_ims_dereg_until_call_rel,imc_config.srvcc_no_ims_dereg_until_call_rel,OTA and OTA BY OP,no,no,no,no,"When enabled, after SRVCC to 23G, UE doesn't send IMS de-registration to network before call is released.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,[Init] set srvcc_no_ims_dereg_until_call_rel = 1<BR>[Test Step]<BR>1. register on LTE and make call<BR>2. SRVCC to 23G<BR>[Expected Result]<BR>UE trigger de-reg after SRVCC when CS call on-going,Pass,,,,
1468,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",srvcc_no_ims_dereg_until_call_rel.srvcc_no_ims_dereg_until_call_rel,imc_config.srvcc_no_ims_dereg_until_call_rel.srvcc_no_ims_dereg_until_call_rel,Not Support,no,no,no,no,"[MCF]When enabled, after SRVCC to 23G, UE doesn't send IMS de-registration to network before call is released.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1469,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",switch_prefer_rat_dereg,imc_config.switch_prefer_rat_dereg,OTA and OTA BY OP,no,no,no,no,Trigger IMS de-registration when supported RATs changes.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"steps: IMS registration, change prefer RAT in UI<BR>=> check if UE triggers IMS de-registration retry when prefer RAT is changed",Pass,,,,
1470,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",switch_prefer_rat_dereg.switch_prefer_rat_dereg,imc_config.switch_prefer_rat_dereg.switch_prefer_rat_dereg,Not Support,no,no,no,no,[MCF]Trigger IMS de-registration when supported RATs changes.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1471,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",text_bearer_lost_retain_timer,imc_config.text_bearer_lost_retain_timer,OTA and OTA BY OP,no,no,no,no,Text bearer reserve waiting timer when bearer lost or waiting bearer allocation from NW while 183 session progress. The configuration is useless while setting to 0 (will apply resource_retain_timer)<BR>1000: UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated text bearer. And UE will downgrade to voice call when timer expired.<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1000:UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated text bearer,,,,IMS,IMS,,,"[Init] IMS Register on 4G, make RTT call over WiFi<BR>[Special condition] NW does not issue a text dedicated bearer on LTE<BR>[Test Step] disable wifi ap to trigger handover<BR>[Expected Result] <BR> with default value (apply resource_retain_timer): call will downgrade to volte after handover to LTE within resource_retain_timer<BR> config to 500ms : call will downgrade to volte after handover to LTE immediately",Untested,,,,
-1472,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",timerB_expiry,imc_config.timerB_expiry,Not Support,no,yes,no,no, module internal config<BR>This parameter is used by IMCB to send disconnet to UA based on the response code received for call cause in MO call confirmation response (TimerB_expiry) from UA<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1473,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",timerF_expiry,imc_config.timerF_expiry,Not Support,no,yes,no,no,module internal config<BR>This parameter is used by IMCB to send disconnect to UA based on the response code received for SMS sent response (TimerF_expiry) from UA.<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1472,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",timerB_expiry,imc_config.timerB_expiry,Not Support,no,yes,no,no,,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1473,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",timerF_expiry,imc_config.timerF_expiry,Not Support,no,yes,no,no,,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1474,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",unlock_ims_permanent_reg_receive_tau,imc_config.unlock_ims_permanent_reg_receive_tau,OTA and OTA BY OP,no,no,no,no,"bit 0: to control if unlock ims reg when periodic TAU.<BR>bit 1: to control if unlock ims reg when TAU trggered by TA change.<BR>bit 2: to control if unlock ims reg for test sim when TAU.<BR>Enbale reset IMS REG lock status when TAU. If enbale, IMS will reset lock status and allow try IMS REG.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"1,make sure enable this parameter;<BR>2,IMS registration with pcscf all fail until IMS lock registration;<BR>3,let UE do TAU and cell id change;<BR>4, expect UE retry IMS registration.",Pass,,,,
1475,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",unlock_ims_permanent_reg_receive_tau.unlock_ims_permanent_reg_receive_tau,imc_config.unlock_ims_permanent_reg_receive_tau.unlock_ims_permanent_reg_receive_tau,Not Support,no,no,no,no,"[MCF]Enbale reset IMS REG lock status when TAU. If enbale, IMS will reset lock status and allow try IMS REG.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1476,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",unsync_cfg,imc_config.unsync_cfg,Not Support,no,yes,no,no,Deprecated.<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
@@ -1471,12 +1471,12 @@
1478,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ussd_support.ussd_support,imc_config.ussd_support.ussd_support,Not Support,no,no,no,no,[MCF]USSD feature supported or notbit 0:0:Not supportbit 1:1:Support,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1479,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",uuid,imc_config.uuid,Not Support,no,no,no,no,Store UUID<BR>,STRING,16,16,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,,,,,,Untested,,,,
1480,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_bearer_lost_retain_timer,imc_config.video_bearer_lost_retain_timer,OTA and OTA BY OP,no,no,no,no,Video bearer reserve waiting timer when bearer lost or waiting bearer allocation from NW while 183 session progress. The configuration is useless while setting to 0 (will apply resource_retain_timer)<BR>1000: UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated video bearer. And UE will downgrade to voice call when timer expired.<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1000:UE will start a 1sec timer waiting for regaining dedicated bearer when NW deactivated video bearer,,,,IMS,IMS,,,"[Init] IMS Register on 4G, make ViWiFi call<BR>[Special condition] NW does not issue a video dedicated bearer on LTE<BR>[Test Step] disable wifi ap to trigger handover<BR>[Expected Result] <BR> with default value (apply resource_retain_timer): call will downgrade to volte after handover to LTE within resource_retain_timer<BR> config to 500ms : call will downgrade to volte after handover to LTE immediately",Pass,,,,
-1481,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_dedicated_fallback_support,imc_config.video_dedicated_fallback_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Allow to use existing dedicated EPS bearer to send RTP/RTCP without waiting for NW.<BR>[Related Configuration] This config behavior will align to dedicated_fallback_support when it's disable (video_dedicated_fallback_support=0)<BR>0:Disable<BR>1:NW will allow to use existing dedicated bearer to send Video stream media/RTP.<BR>2:NW will NOT allow to use existing dedicated bearer to send Video stream media/RTP.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:NW will allow to use existing dedicated bearer to send Video stream media<BR>2:NW will NOT allow to use existing dedicated bearer to send Video stream media,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>IMS is registered.<BR>[Test Step]<BR>1. make a ViLTE call.<BR>2. hold call<BR>3. make another ViLTE call<BR>4. NW shoud not issue video dedicated bearer for 2nd call<BR>5. 2nd call should be success.<BR>[Expected Result]<BR>2nd call should be success.,Untested,,,,
+1481,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_dedicated_fallback_support,imc_config.video_dedicated_fallback_support,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:NW will allow to use existing dedicated bearer to send Video stream media<BR>2:NW will NOT allow to use existing dedicated bearer to send Video stream media,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>IMS is registered.<BR>[Test Step]<BR>1. make a ViLTE call.<BR>2. hold call<BR>3. make another ViLTE call<BR>4. NW shoud not issue video dedicated bearer for 2nd call<BR>5. 2nd call should be success.<BR>[Expected Result]<BR>2nd call should be success.,Untested,,,,
1482,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_dedicated_fallback_support.video_dedicated_fallback_support,imc_config.video_dedicated_fallback_support.video_dedicated_fallback_support,Not Support,no,no,no,no,[MCF]Allow to use existing dedicated EPS bearer to send RTP/RTCP without waiting for NWbit 0:0:Disablebit 1:1:NW will allow to use existing dedicated bearer to send Video stream media/RTP.bit 2:2:NW will NOT allow to use existing dedicated bearer to send Video stream media/RTP.,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1483,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_default_fallback_support,imc_config.video_default_fallback_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Allow to use default EPS bearer for video stream.<BR>[Related Configuration] This config behavior will align to default_fallback_support when it's disable (video_default_fallback_support=0)<BR>0:Disable<BR>1:NW will allow to use default bearer to send Video stream media/RTP over default bearer.<BR>2:NW will allow NOT use default bearer to send Video stream media/RTP over default bearer.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:NW will allow to use default bearer to send Video stream media<BR>2:NW will allow NOT use default bearer to send Video stream media,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW does not issue video dedicated bearer for ViLTE Call<BR>[Test Step] make ViLTE call<BR>[Expected Result] <BR> disable: vilte call failed and downgrade to voice call<BR> enable: vilte call success,Pass,,,,
+1483,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_default_fallback_support,imc_config.video_default_fallback_support,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:NW will allow to use default bearer to send Video stream media<BR>2:NW will allow NOT use default bearer to send Video stream media,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Special condition] NW does not issue video dedicated bearer for ViLTE Call<BR>[Test Step] make ViLTE call<BR>[Expected Result] <BR> disable: vilte call failed and downgrade to voice call<BR> enable: vilte call success,Pass,,,,
1484,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_default_fallback_support.video_default_fallback_support,imc_config.video_default_fallback_support.video_default_fallback_support,Not Support,no,no,no,no,[MCF]Allow to use default EPS bearer for video streambit 0:0:Disablebit 1:1:NW will allow to use default bearer to send Video stream media/RTP over default bearer.bit 2:2:NW will allow NOT use default bearer to send Video stream media/RTP over default bearer.,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1485,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_over_ps_support,imc_config.video_over_ps_support,Not Support,no,yes,no,no,The configuration will be overwritten by AP config in runtime<BR>0:Not support<BR>1:Support<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not support<BR>1:Support,,,,,,,,,Untested,,,,
-1486,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_resource_retain_timer,imc_config.video_resource_retain_timer,OTA and OTA BY OP,no,no,no,no,Time for which the UE will have to wait for the dedicated EPS bearer setup from NW for Video stream. <BR>[Related Configuration] This config behavior will align to resouce_retain_timer when it's disable (video_resource_retain_timer=0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Special condition] NW delay to issue video dedicated bearer (5sec after SIP 183)<BR>[Test Step] make vilte call<BR>[Expected Result] <BR> with default value (3sec): vilte call failed, downgrade to voice call<BR> change config to 6 sec: vilte call success",Pass,,,,
+1486,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_resource_retain_timer,imc_config.video_resource_retain_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Special condition] NW delay to issue video dedicated bearer (5sec after SIP 183)<BR>[Test Step] make vilte call<BR>[Expected Result] <BR> with default value (3sec): vilte call failed, downgrade to voice call<BR> change config to 6 sec: vilte call success",Pass,,,,
1487,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",voice_bearer_ctrl,imc_config.voice_bearer_ctrl,Not Support,no,yes,no,no, Deprecated<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1488,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",voice_support,imc_config.voice_support,Not Support,no,yes,no,no,The configuration will be overwritten by AP config in runtime<BR>0:Not support<BR>1:Support<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not support<BR>1:Support,,,,,,,,,Untested,,,,
1489,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_for_sgn_timer,imc_config.wait_for_sgn_timer,OTA and OTA BY OP,no,no,no,no,"The waiting timer after signaling parameter checking failed, UE will deactivate IMS PDN if no correct signaling parameters when timeout. <BR>0xFFFFFFFE:Disable<BR>other:Enable<BR>unit: sec<BR>",UNSIGNED INT,4,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,NA,IMS,IMS,,,[Init] attach to LTE<BR>[Special Condition] NW activate a IMS PDN with wrong QCI<BR>[Test Step] wait for 30 sec<BR>[Expected Result] <BR> with default value (5sec) : UE will deact IMS PDN after 5 sec and retry<BR> config to 20 sec : UE will deact IMS PDN after 20 sec and retry,Untested,,,,
@@ -1534,22 +1534,22 @@
1541,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_conf_factory_uri,ua_config.UA_conf_factory_uri,OTA and OTA BY OP,no,no,no,no,This is the conference factory URI setting when making IMS conference call. It can be customized by operator requirement or constructed according to 3GPP TS 23.003. <BR>recommand to follow standard specification<BR>,STRING,128,128,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,recommand to follow standard specification<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] SIP INVITE to the conference focus server has set the request URI according to this parameter[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] SIP INVITE to the conference focus server has set the request URI according to this parameter,Pass,,,,
1542,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_g711_ptime,ua_config.UA_g711_ptime,Not Support,no,no,no,no,"From IETF RFC4566, This gives the maximum amount of media that can be encapsulated in each packet, expressed as time in milliseconds for G.711 codec.<BR>recommand to set to 20ms<BR>unit: ms<BR>",UNSIGNED CHAR,1,,,20,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Deprecated,Untested,,,,
1543,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_g726_ptime,ua_config.UA_g726_ptime,Not Support,no,no,no,no,"From IETF RFC4566, This gives the maximum amount of media that can be encapsulated in each packet, expressed as time in milliseconds for G.726 codec.<BR>recommand to set to 20ms<BR>unit: ms<BR>",UNSIGNED CHAR,1,,,20,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1548,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_net_ipsec,ua_config.UA_net_ipsec,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>UE support IPSEC or not<BR>0: Not support<BR>1: Support<BR>,UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not support<BR>1:Support,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs Security-Client header,Pass,,,,
+1548,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_net_ipsec,ua_config.UA_net_ipsec,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Not support<BR>1:Support,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs Security-Client header,Pass,,,,
1549,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_net_ipsec.UA_net_ipsec,ua_config.UA_net_ipsec.UA_net_ipsec,Not Support,no,no,no,no,[MCF]UE support IPSEC or notbit 0:0:Not supportbit 1:1:Support,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
-1552,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_a_timer,ua_config.UA_reg_a_timer,OTA and OTA BY OP,no,no,no,no,"SIP timer A. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>INVITE request retransmit interval, for UDP only. <BR>0: 64*T1 timer (TS24.229 T1 timer)<BR>others: specify value<BR>unit: ms<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply INVITE <BR>[Test Step] IMS registration, MO call<BR>[Expected Result] check ELT sip view, the interval between 2nd INVITE(1st retransmission) & 1st INVITE will be t1 timer.",Untested,,,,
-1553,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_auth_name,ua_config.UA_reg_auth_name,OTA and OTA BY OP,no,no,no,no,Username for md5 authentication.<BR>,STRING,64,64,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test with MD5 authentication operator,Untested,,,,
-1554,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_auth_password,ua_config.UA_reg_auth_password,OTA and OTA BY OP,no,no,no,no,Password for md5 authentication.<BR>,STRING,32,32,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test with MD5 authentication operator,Untested,,,,
-1555,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_b_timer,ua_config.UA_reg_b_timer,OTA and OTA BY OP,no,no,no,no,"SIP timer B. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>INVITE transaction timeout timer.<BR>0: timer_b is generated automatically according to rfc3261, and will be 64 * T1. other value: timer_b is config manually<BR>unit: ms<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:timer_b is generated automatically according to rfc3261, and will be 64",,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply INVITE <BR>[Test Step] IMS registration, MO call<BR>[Expected Result] check ELT sip view, the interval between last INVITE(nth retransmission) & 1st INVITE will not greater than b timer.",Pass,,,,
-1556,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_c_timer,ua_config.UA_reg_c_timer,OTA and OTA BY OP,no,no,no,no,"SIP timer C. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Proxy INVITE transaction timeout. It is used in proxy server, not UE. <BR>unit: ms<BR>",UNSIGNED INT,4,,,180000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,not used in UE<BR>so we don't need to test this item,Untested,,,,
-1557,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_d_timer,ua_config.UA_reg_d_timer,OTA and OTA BY OP,no,no,no,no,SIP timer D. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Wait time for response retransmits.<BR>unit: ms<BR>,UNSIGNED INT,4,,,128000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,UT will cover,Untested,,,,
-1558,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_e_timer,ua_config.UA_reg_e_timer,OTA and OTA BY OP,no,no,no,no,"SIP timer E. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Non-INVITE request retransmit interval, UDP only.<BR>0: TS24.229 T1 timer<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,[Init] simulate NW didn't reply any response to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check retransmission interval between 1st REGISTER & 2nd REGISTER(aka retransmission),Pass,,,,
-1559,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_f_timer,ua_config.UA_reg_f_timer,OTA and OTA BY OP,no,no,no,no,SIP timer F. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,timer F = 64 * T1<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply REGISTER <BR>[Test Step] IMS registration<BR>[Expected Result] check ELT sip view, the interval between lst REGISTER & last REGISTER won't greater than f timer.",Pass,,,,
-1560,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_g_timer,ua_config.UA_reg_g_timer,OTA and OTA BY OP,no,no,no,no,SIP timer G. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>INVITE response retransmit interval<BR>0: TS24.229 T1 timer<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,"[Init] simulate NW didn't reply sip ACK to 200 OK(INVITE)<BR>[Test Step] IMS registration, MT call<BR>[Expected Result] when MT picks up phone, check 200 OK(INVITE) retransmission interval",Pass,,,,
-1561,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_h_timer,ua_config.UA_reg_h_timer,OTA and OTA BY OP,no,no,no,no,SIP timer H. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Wait time for ACK receipt<BR>0: 64*T1 (TS24.229 T1 timer)<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,"[Init]Simulate NW to send INVITE via UDP and not to send ACK when receiving 2xx <BR>[Test Step] IMS registration, MT INVITE<BR>[Expected Result] check ELT sip view, the interval between 1st 2xx & last 2xx won't greater than h timer.",Pass,,,,
-1562,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_http_digest,ua_config.UA_reg_http_digest,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>IMS regristration autentication mechanisms<BR>0:AKAv1_MD5<BR>1:MD5<BR>2:AKAv2_MD5<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:MD5<BR>2:AKAv2_MD5<BR>0:AKAv1_MD5,,,,IMS,IMS,,,"[Init] UA_reg_http_digest = 0<BR>[Test Step] IMS registration<BR>[Expected Result]check algorithm in Register Contact header <BR>that its AKAv1 , when UA_reg_http_digest changed to 2 <BR>algorithm in Register Contact header is changed to AKAv2",Untested,,,,
+1552,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_a_timer,ua_config.UA_reg_a_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply INVITE <BR>[Test Step] IMS registration, MO call<BR>[Expected Result] check ELT sip view, the interval between 2nd INVITE(1st retransmission) & 1st INVITE will be t1 timer.",Untested,,,,
+1553,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_auth_name,ua_config.UA_reg_auth_name,OTA and OTA BY OP,no,no,no,no,,STRING,64,64,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test with MD5 authentication operator,Untested,,,,
+1554,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_auth_password,ua_config.UA_reg_auth_password,OTA and OTA BY OP,no,no,no,no,,STRING,32,32,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test with MD5 authentication operator,Untested,,,,
+1555,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_b_timer,ua_config.UA_reg_b_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:timer_b is generated automatically according to rfc3261, and will be 64",,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply INVITE <BR>[Test Step] IMS registration, MO call<BR>[Expected Result] check ELT sip view, the interval between last INVITE(nth retransmission) & 1st INVITE will not greater than b timer.",Pass,,,,
+1556,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_c_timer,ua_config.UA_reg_c_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,180000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,not used in UE<BR>so we don't need to test this item,Untested,,,,
+1557,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_d_timer,ua_config.UA_reg_d_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,128000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,UT will cover,Untested,,,,
+1558,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_e_timer,ua_config.UA_reg_e_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,[Init] simulate NW didn't reply any response to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check retransmission interval between 1st REGISTER & 2nd REGISTER(aka retransmission),Pass,,,,
+1559,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_f_timer,ua_config.UA_reg_f_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,timer F = 64 * T1<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply REGISTER <BR>[Test Step] IMS registration<BR>[Expected Result] check ELT sip view, the interval between lst REGISTER & last REGISTER won't greater than f timer.",Pass,,,,
+1560,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_g_timer,ua_config.UA_reg_g_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,"[Init] simulate NW didn't reply sip ACK to 200 OK(INVITE)<BR>[Test Step] IMS registration, MT call<BR>[Expected Result] when MT picks up phone, check 200 OK(INVITE) retransmission interval",Pass,,,,
+1561,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_h_timer,ua_config.UA_reg_h_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,"[Init]Simulate NW to send INVITE via UDP and not to send ACK when receiving 2xx <BR>[Test Step] IMS registration, MT INVITE<BR>[Expected Result] check ELT sip view, the interval between 1st 2xx & last 2xx won't greater than h timer.",Pass,,,,
+1562,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_http_digest,ua_config.UA_reg_http_digest,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:MD5<BR>2:AKAv2_MD5<BR>0:AKAv1_MD5,,,,IMS,IMS,,,"[Init] UA_reg_http_digest = 0<BR>[Test Step] IMS registration<BR>[Expected Result]check algorithm in Register Contact header <BR>that its AKAv1 , when UA_reg_http_digest changed to 2 <BR>algorithm in Register Contact header is changed to AKAv2",Untested,,,,
1563,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_http_digest.UA_reg_http_digest,ua_config.UA_reg_http_digest.UA_reg_http_digest,Not Support,no,no,no,no,[MCF]Autentication mechanismsbit 0:0:AKAv1_MD5bit 1:1:MD5bit 2:2:AKAv2_MD5,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1564,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_i_timer,ua_config.UA_reg_i_timer,OTA and OTA BY OP,no,no,no,no,SIP timer I. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Wait time for ACK retransmits (udp only)<BR>0: TS24.229 T4 timer<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,,Untested,,,,
-1565,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo,ua_config.UA_reg_ipsec_algo,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Stands whcih encyrption/integrity algorithm Scurity-Client header will bring<BR>b1: NULL+MD5<BR>b2: NULL+SHA1<BR>b3: 3DES+MD5<BR>b4: 3DES+SHA1<BR>b5: AES+MD5<BR>b6: AES+SHA1<BR>b7: reserved<BR>,UNSIGNED CHAR,1,,,0x3f,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:NULL+MD5<BR>b2:NULL+SHA1<BR>b3:3DES+MD5<BR>b4:3DES+SHA1<BR>b5:AES+MD5<BR>b6:AES+SHA1<BR>b7:reserved,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
+1564,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_i_timer,ua_config.UA_reg_i_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,,Untested,,,,
+1565,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo,ua_config.UA_reg_ipsec_algo,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0x3f,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:NULL+MD5<BR>b2:NULL+SHA1<BR>b3:3DES+MD5<BR>b4:3DES+SHA1<BR>b5:AES+MD5<BR>b6:AES+SHA1<BR>b7:reserved,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
1566,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo.b1,ua_config.UA_reg_ipsec_algo.b1,OTA and OTA BY OP,no,no,no,no,"[MCF]This value is a bit map format, and it stands whcih encyrption/integrity algorithm Scurity-Client header will bring.NULL+MD5",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
1567,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo.b2,ua_config.UA_reg_ipsec_algo.b2,OTA and OTA BY OP,no,no,no,no,"[MCF]This value is a bit map format, and it stands whcih encyrption/integrity algorithm Scurity-Client header will bring.NULL+SHA1",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
1568,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo.b3,ua_config.UA_reg_ipsec_algo.b3,OTA and OTA BY OP,no,no,no,no,"[MCF]This value is a bit map format, and it stands whcih encyrption/integrity algorithm Scurity-Client header will bring.3DES+MD5",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
@@ -1557,12 +1557,12 @@
1570,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo.b5,ua_config.UA_reg_ipsec_algo.b5,OTA and OTA BY OP,no,no,no,no,"[MCF]This value is a bit map format, and it stands whcih encyrption/integrity algorithm Scurity-Client header will bring.AES+MD5",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
1571,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo.b6,ua_config.UA_reg_ipsec_algo.b6,OTA and OTA BY OP,no,no,no,no,"[MCF]This value is a bit map format, and it stands whcih encyrption/integrity algorithm Scurity-Client header will bring.AES+SHA1",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
1572,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_ipsec_algo.b7,ua_config.UA_reg_ipsec_algo.b7,Not Support,no,no,no,no,"[MCF]This value is a bit map format, and it stands whcih encyrption/integrity algorithm Scurity-Client header will bring.reserved",BIT,2,,2,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] UA_net_ipsec = 1<BR>[Test Step] IMS registration<BR>[Expected Result] algorithm in Security-Client header is changed,Pass,,,,
-1573,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_j_timer,ua_config.UA_reg_j_timer,OTA and OTA BY OP,no,no,no,no,SIP timer J. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Wait time for non-INVITE request retransmits (udp only)<BR>0: 64*T1 (TS24.229 T1 timer)<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,UT will cover,Untested,,,,
-1574,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_k_timer,ua_config.UA_reg_k_timer,OTA and OTA BY OP,no,no,no,no,SIP timer K. Definded at TS24.229 Table 7.7.1: SIP timers.<BR>Wait time for response retransmits (udp only)<BR>0: TS24.229 T4 timer<BR>others: specify value (shoud be larger than 0)<BR>unit: ms<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,UT will cover,Untested,,,,
-1575,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_keep_alive,ua_config.UA_reg_keep_alive,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>How long to send keep alive packet peroidically<BR>0: keep alive is disabled<BR>others: specify value (shoud be larger than 0)<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:keep alive is disabled,,,1915,IMS,IMS,,,Please refer to keep_alive_mode,Pass,,,,
+1573,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_j_timer,ua_config.UA_reg_j_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,UT will cover,Untested,,,,
+1574,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_k_timer,ua_config.UA_reg_k_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,UT will cover,Untested,,,,
+1575,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_keep_alive,ua_config.UA_reg_keep_alive,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:keep alive is disabled,,,1915,IMS,IMS,,,Please refer to keep_alive_mode,Pass,,,,
1576,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_retry_base_time,ua_config.UA_reg_retry_base_time,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1577,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_retry_max_time,ua_config.UA_reg_retry_max_time,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1578,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo,ua_config.UA_reg_specific_ipsec_algo,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Force UE to use one specified encrytpion/integrity algorithm to create ipsec tunnel with P-CSCF no matter the negoitation result.<BR>b1: NULL+MD5<BR>b2: NULL+SHA1<BR>b3: 3DES+MD5<BR>b4: 3DES+SHA1<BR>b5: AES+MD5<BR>b6: AES+SHA1<BR>b7: reserved<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b3:3DES+MD5<BR>b4:3DES+SHA1<BR>b5:AES+MD5<BR>b1:NULL+MD5<BR>b2:NULL+SHA1<BR>b6:AES+SHA1<BR>b7:reserved,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
+1578,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo,ua_config.UA_reg_specific_ipsec_algo,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b3:3DES+MD5<BR>b4:3DES+SHA1<BR>b5:AES+MD5<BR>b1:NULL+MD5<BR>b2:NULL+SHA1<BR>b6:AES+SHA1<BR>b7:reserved,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
1579,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo.b1,ua_config.UA_reg_specific_ipsec_algo.b1,Not Support,no,no,no,no,[MCF]Force UE to use one specified encrytpion/integrity algorithm to create ipsec tunnel with P-CSCF no matter the negoitation result.NULL+MD5,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
1580,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo.b2,ua_config.UA_reg_specific_ipsec_algo.b2,Not Support,no,no,no,no,[MCF]Force UE to use one specified encrytpion/integrity algorithm to create ipsec tunnel with P-CSCF no matter the negoitation result.NULL+SHA1,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
1581,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo.b3,ua_config.UA_reg_specific_ipsec_algo.b3,Not Support,no,no,no,no,[MCF]Force UE to use one specified encrytpion/integrity algorithm to create ipsec tunnel with P-CSCF no matter the negoitation result.3DES+MD5,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
@@ -1570,18 +1570,18 @@
1583,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo.b5,ua_config.UA_reg_specific_ipsec_algo.b5,Not Support,no,no,no,no,[MCF]Force UE to use one specified encrytpion/integrity algorithm to create ipsec tunnel with P-CSCF no matter the negoitation result.AES+MD5,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
1584,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo.b6,ua_config.UA_reg_specific_ipsec_algo.b6,Not Support,no,no,no,no,[MCF]Force UE to use one specified encrytpion/integrity algorithm to create ipsec tunnel with P-CSCF no matter the negoitation result.AES+SHA1,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
1585,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_specific_ipsec_algo.b7,ua_config.UA_reg_specific_ipsec_algo.b7,Not Support,no,no,no,no,[MCF]Force UE to use one specified encrytpion/integrity algorithm to create ipsec tunnel with P-CSCF no matter the negoitation result.reserved,BIT,2,,2,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,[Init] init the reg specific ipsec algo<BR>[Test Step] IMS registration with ipsec enabled<BR>[Expected Result]chnaging the value will change the ipsec <BR>algo being used,Pass,,,,
-1586,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_t1_timer,ua_config.UA_reg_t1_timer,OTA and OTA BY OP,no,no,no,no,SIP timer T1. Definded at TS24.229 Table 7.7.1: SIP timers. <BR>unit: ms<BR>,UNSIGNED INT,4,,,2000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"this timer is referred by other timer, so please check other timer's behavior",Pass,,,,
-1587,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_t2_timer,ua_config.UA_reg_t2_timer,OTA and OTA BY OP,no,no,no,no,SIP timer T2. Definded at TS24.229 Table 7.7.1: SIP timers. <BR>The maximum retransmit interval for non-INVITE requests and INVITE responses<BR>unit: ms<BR>,UNSIGNED INT,4,,,16000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply REGISTER <BR>[Test Step] IMS registration<BR>[Expected Result] check ELT sip view, the maximum retransmissin interval between 2 adjacent REGISTER will be T2 timer",Pass,,,,
-1588,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_t4_timer,ua_config.UA_reg_t4_timer,OTA and OTA BY OP,no,no,no,no,SIP timer T4. Definded at TS24.229 Table 7.7.1: SIP timers. <BR>Maximum duration a message will remain in the network<BR>0: TS24.229 T1 timer<BR>others: specify value<BR>unit: ms<BR>,UNSIGNED INT,4,,,17000,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,"UA_reg_k_timer/UA_reg_i_timer will refer to this timer, so please check UA_reg_k_timer/UA_reg_i_timer test procedure",Pass,,,,
-1589,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_uri_with_port,ua_config.UA_reg_uri_with_port,OTA and OTA BY OP,no,no,no,no,Reuqest URI in REGISTER brings port parameter or not<BR>0:No<BR>1:Yes<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:No<BR>1:Yes,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER URI birngs "port" parameter,Pass,,,,
+1586,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_t1_timer,ua_config.UA_reg_t1_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,2000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"this timer is referred by other timer, so please check other timer's behavior",Pass,,,,
+1587,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_t2_timer,ua_config.UA_reg_t2_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,16000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init]EM->IMS->Registration VoLTE_Setting_SIP_Force_Use_UDP=1, Simulate NW not to reply REGISTER <BR>[Test Step] IMS registration<BR>[Expected Result] check ELT sip view, the maximum retransmissin interval between 2 adjacent REGISTER will be T2 timer",Pass,,,,
+1588,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_t4_timer,ua_config.UA_reg_t4_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,17000,NR15.R3.MD700.IVT.MP1MR3.MP,,0:TS24,,,,IMS,IMS,,,"UA_reg_k_timer/UA_reg_i_timer will refer to this timer, so please check UA_reg_k_timer/UA_reg_i_timer test procedure",Pass,,,,
+1589,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_uri_with_port,ua_config.UA_reg_uri_with_port,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:No<BR>1:Yes,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER URI birngs "port" parameter,Pass,,,,
1590,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_reg_uri_with_port.UA_reg_uri_with_port,ua_config.UA_reg_uri_with_port.UA_reg_uri_with_port,Not Support,no,no,no,no,[MCF]Reuqest URI in REGISTER brings port parameter or notbit 0:0:Nobit 1:1:Yes,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1591,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_ussd_nw_timeout_timer,ua_config.UA_ussd_nw_timeout_timer,OTA and OTA BY OP,no,no,no,no,Local release before NW timeout. This will report failure to AP and do local release<BR>0:Disable<BR>other value: time duration<BR>unit: sec<BR>,UNSIGNED CHAR,1,,,0x3c,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,,IMS,IMS,,,"[Init] set ussd_support = 1,IMS Register on 4G,<BR>[Test Step] make ussd operation<BR>[Expected Result] USSD operation success via IMS<BR>0: timer disable<BR>other value: if NW don't send final response for request in this time period, MD will do local release and report error",Pass,,,,
1592,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",UA_ussd_setup_timeout_timer,ua_config.UA_ussd_setup_timeout_timer,OTA and OTA BY OP,no,no,no,no,MAX time of USSD session waitting for any response of INVITE to report error to AP to decide whether CSFB. <BR>0:Disable<BR>other value: time duration<BR>unit: sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable,,,,IMS,IMS,,,"[Init] set ussd_support = 1,IMS Register on 4G,<BR>[Test Step] make ussd operation<BR>[Expected Result] USSD operation success via IMS<BR>0: timer disable<BR>other value: if NW don't send any final response for INVITE request, UE will CSFB to do USSD operation",Pass,,,,
-1593,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_Force_Use_UDP,ua_config.VoLTE_Setting_SIP_Force_Use_UDP,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Force SIP request to use UDP.<BR>0: disable<BR>1: enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE, enble 1<BR>[Test Step] register volte<BR>[Expected Result] check sip msg register wether use udp to send",Pass,,,,
-1594,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_MSS,ua_config.VoLTE_Setting_SIP_TCP_MSS,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>TCP Maximum segment size<BR>,UNSIGNED INT,4,,,1200,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check segment of sip msg register if is smaller 1200,Pass,,,,
-1595,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_MTU_Size,ua_config.VoLTE_Setting_SIP_TCP_MTU_Size,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If message length of sip request is larger than this value, UE will use tcp to send the message; otherwise, use UDP.<BR>",UNSIGNED SHORT,2,,,1300,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check sip msg register if use tcp to transmit,Pass,,,,
-1596,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_On_Demand,ua_config.VoLTE_Setting_SIP_TCP_On_Demand,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If this configuration is turned ON, UE will set up a new TCP connection only when there's SIP message to be sent. If P-CSCF disconnects, a new connection is not set up until a new SIP message is being sent. If this configuration is turned OFF, UE will keep TCP connection active at all times. If P-CSCF disconnects, a new connection is set up immediately.<BR>0: disable<BR>1: enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE, enble 1<BR>[Test Step] register volte, move UE from 4G to 2G and return 4G, make a volte call<BR>[Expected Result] check UE if setup tcp connection before sip msg inivte",Pass,,,,
-1597,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type,ua_config.access_network_info_type,OTA and OTA BY OP,no,no,no,no,"Indicate which access network format is used in P-Access-Network-Info header<BR>b0: Indicate which access network format PANI header uses when IMS is in 3GPP access network. (0:access-type, 1:access-class)<BR>b1: Indicate which access network format PANI header uses when IMS is in NON-3GPP access network. (0:access-type, 1:access-class)<BR>b2: Omit access class character from non-3GPP access type. For example IEEE-802.11n is sent as IEEE-802.11 in P-Access-Network-Info header. <BR>b3-b7: reserved<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b0:Indicate which access network format PANI header uses when IMS is in 3GPP access network<BR>b1:Indicate which access network format PANI header uses when IMS is in NON<BR>b2:Omit access class character from non,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
+1593,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_Force_Use_UDP,ua_config.VoLTE_Setting_SIP_Force_Use_UDP,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE, enble 1<BR>[Test Step] register volte<BR>[Expected Result] check sip msg register wether use udp to send",Pass,,,,
+1594,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_MSS,ua_config.VoLTE_Setting_SIP_TCP_MSS,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,1200,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check segment of sip msg register if is smaller 1200,Pass,,,,
+1595,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_MTU_Size,ua_config.VoLTE_Setting_SIP_TCP_MTU_Size,OTA and OTA BY OP,no,no,no,no,,UNSIGNED SHORT,2,,,1300,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check sip msg register if use tcp to transmit,Pass,,,,
+1596,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_On_Demand,ua_config.VoLTE_Setting_SIP_TCP_On_Demand,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE, enble 1<BR>[Test Step] register volte, move UE from 4G to 2G and return 4G, make a volte call<BR>[Expected Result] check UE if setup tcp connection before sip msg inivte",Pass,,,,
+1597,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type,ua_config.access_network_info_type,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b0:Indicate which access network format PANI header uses when IMS is in 3GPP access network<BR>b1:Indicate which access network format PANI header uses when IMS is in NON<BR>b2:Omit access class character from non,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
1598,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type.b1,ua_config.access_network_info_type.b1,Not Support,no,no,no,no,"[MCF]This configuration is bitmask. Bit0 & bit1 indicate which access network format is used in P-Access-Network-Info header. There are two access network format, 1st format is called access-type, and 2nd is called access-class. If access-type is choosen, PANI header will contain access-type parameter, and access-type field could be 3GPP-GERAN/3GPP-UTRAN-FDD/3GPP-UTRAN-TDD/3GPP-E-UTRAN-FDD/3GPP-E-UTRAN-TDD/IEEE-802.11a/IEEE-802.11b/IEEE-802.11g/IEEE-802.11n...etc. If access-class is choosen, PANI header will contain access-class parameter, and access-class field could be 3GPP-GERAN/3GPP-UTRAN/3GPP-E-UTRAN/3GPP-WLAN...etcIndicate which access network format PANI header uses when IMS is in 3GPP access network. (0:access-type, 1:access-class)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
1599,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type.b2,ua_config.access_network_info_type.b2,Not Support,no,no,no,no,"[MCF]This configuration is bitmask. Bit0 & bit1 indicate which access network format is used in P-Access-Network-Info header. There are two access network format, 1st format is called access-type, and 2nd is called access-class. If access-type is choosen, PANI header will contain access-type parameter, and access-type field could be 3GPP-GERAN/3GPP-UTRAN-FDD/3GPP-UTRAN-TDD/3GPP-E-UTRAN-FDD/3GPP-E-UTRAN-TDD/IEEE-802.11a/IEEE-802.11b/IEEE-802.11g/IEEE-802.11n...etc. If access-class is choosen, PANI header will contain access-class parameter, and access-class field could be 3GPP-GERAN/3GPP-UTRAN/3GPP-E-UTRAN/3GPP-WLAN...etcIndicate which access network format PANI header uses when IMS is in NON-3GPP access network. (0:access-type, 1:access-class)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
1600,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",access_network_info_type.b3,ua_config.access_network_info_type.b3,Not Support,no,no,no,no,"[MCF]This configuration is bitmask. Bit0 & bit1 indicate which access network format is used in P-Access-Network-Info header. There are two access network format, 1st format is called access-type, and 2nd is called access-class. If access-type is choosen, PANI header will contain access-type parameter, and access-type field could be 3GPP-GERAN/3GPP-UTRAN-FDD/3GPP-UTRAN-TDD/3GPP-E-UTRAN-FDD/3GPP-E-UTRAN-TDD/IEEE-802.11a/IEEE-802.11b/IEEE-802.11g/IEEE-802.11n...etc. If access-class is choosen, PANI header will contain access-class parameter, and access-class field could be 3GPP-GERAN/3GPP-UTRAN/3GPP-E-UTRAN/3GPP-WLAN...etcReserved",BIT,6,,6,0x3f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if P-Access-Network-Info header format is changed,Pass,,,,
@@ -1593,9 +1593,9 @@
1606,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_3gpp_ims_in_Accept.add_3gpp_ims_in_Accept,ua_config.add_3gpp_ims_in_Accept.add_3gpp_ims_in_Accept,Not Support,no,no,no,no,[MCF]TS 34.229 release 9 GCF test cases request the UE to add application/sdp and appliation/3gpp-ims+xml in the ACCEPT HEADER. But some operators network do not support it.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1607,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_audio_video_in_delay_media,ua_config.add_audio_video_in_delay_media,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>add audio SDP when receiving INVITE without SDP.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[INIT]<BR>A, B, C are CMCC VOLTE user. B set call forward when no repy to UE C.<BR>[Test Step]<BR>1. A VOLTE call B, do not answer B<BR>2. NW hangup UE B, UE C receive forwaring call<BR>[Expected Result]<BR>Enable: UE C response 183 with auido and video media line.<BR>Disable: UE C response 183 with only with auido media line.",Pass,,,,
1608,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_audio_video_in_delay_media.add_audio_video_in_delay_media,ua_config.add_audio_video_in_delay_media.add_audio_video_in_delay_media,Not Support,no,no,no,no,[MCF]add audio SDP when receiving INVITE without SDP.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1609,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cell_info_age_to_cni,ua_config.add_cell_info_age_to_cni,OTA and OTA BY OP,no,no,no,no,"If enabled, adds cell-info-age tag into Cellular-Network-Info header<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init] UE in WiFi, VoLTE disabled<BR>[Test Step] Enabled VoLTE and observer REGISTER message Cellular-Network-Info header<BR>[Expected Result] <BR>Enabled: Age tag is included in Cellular-Network-Info header.<BR>Disabled: Age tag is not included.",Pass,,,,
+1609,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cell_info_age_to_cni,ua_config.add_cell_info_age_to_cni,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init] UE in WiFi, VoLTE disabled<BR>[Test Step] Enabled VoLTE and observer REGISTER message Cellular-Network-Info header<BR>[Expected Result] <BR>Enabled: Age tag is included in Cellular-Network-Info header.<BR>Disabled: Age tag is not included.",Pass,,,,
1610,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cell_info_age_to_cni.add_cell_info_age_to_cni,ua_config.add_cell_info_age_to_cni.add_cell_info_age_to_cni,Not Support,no,no,no,no,"[MCF]If enabled, adds cell-info-age tag into Cellular-Network-Info headerbit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1611,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cni_in_wifi,ua_config.add_cni_in_wifi,OTA and OTA BY OP,no,no,no,no,"Add Cellular-Network-Info header for VoWiFi, to record the latest cellular id information. With bitmask default value 0 CNI header is not added.<BR>b0: CNI to all messages (REG,Call,SMS,USSD)<BR>b1: CNI to call only<BR>b2: CNI to sms only<BR>b3: CNI to emergency call only<BR>b4-b7 reserved<BR>",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"b0:CNI to all messages (REG,Call,SMS,USSD)<BR>b1:CNI to call only<BR>b2:CNI to sms only<BR>b3:CNI to emergency call only",,,,IMS,IMS,,,[Init] IMS Register on WFC<BR>[Test Step] Make IMS call<BR>[Expected Result]<BR> Bitmask bit enabled will add Cellular-Network-Info header to REGISTER and/or INVITE,Pass,,,,
+1611,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cni_in_wifi,ua_config.add_cni_in_wifi,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"b0:CNI to all messages (REG,Call,SMS,USSD)<BR>b1:CNI to call only<BR>b2:CNI to sms only<BR>b3:CNI to emergency call only",,,,IMS,IMS,,,[Init] IMS Register on WFC<BR>[Test Step] Make IMS call<BR>[Expected Result]<BR> Bitmask bit enabled will add Cellular-Network-Info header to REGISTER and/or INVITE,Pass,,,,
1612,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cni_in_wifi.add_cni_in_wifi,ua_config.add_cni_in_wifi.add_cni_in_wifi,Not Support,no,no,no,no,"[MCF]Add Cellular-Network-Info header for VoWiFi, to record the latest cellular id information.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1613,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_contact_in_bye,ua_config.add_contact_in_bye,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>This is to add Contact header field in SIP BYE method according to some operator networks because TS 34.229 does not request it.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi. <BR>[Test Step] make a MO call and then hang-up the call<BR>[Expected Result] The UE will add Contact header field in the SIP BYE request if the configuration is set to 1.,Pass,,,,
1614,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_contact_in_bye.add_contact_in_bye,ua_config.add_contact_in_bye.add_contact_in_bye,Not Support,no,no,no,no,[MCF]Add Contact header in BYE methodbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1603,7 +1603,7 @@
1616,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_country_to_pani.b1,ua_config.add_country_to_pani.b1,Not Support,no,no,no,no,[MCF]P-Access-Network-Info header contains country-parameter when MCC is available.Add country in WFC MESSAGE/REG/INVITE,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Almost every SIP message contains P-Acess-Network-Info header.<BR>So after modifying the value, make IMS call.<BR>Check the P-Access-Network-Header field. <BR>If the value is set to 0, there is no country parameter<BR>If the bit1 is set to 1, there is country parameter in non-3gpp access<BR>If the bit2 is set to 1, there is country parameter in 3gpp acess.",Pass,,,,
1617,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_country_to_pani.b2,ua_config.add_country_to_pani.b2,Not Support,no,no,no,no,[MCF]P-Access-Network-Info header contains country-parameter when MCC is available.Add country in VoLTE MESSAGE/REG/INVITE,BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Almost every SIP message contains P-Acess-Network-Info header.<BR>So after modifying the value, make IMS call.<BR>Check the P-Access-Network-Header field. <BR>If the value is set to 0, there is no country parameter<BR>If the bit1 is set to 1, there is country parameter in non-3gpp access<BR>If the bit2 is set to 1, there is country parameter in 3gpp acess.",Pass,,,,
1618,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_country_to_pani.b3,ua_config.add_country_to_pani.b3,Not Support,no,no,no,no,[MCF]P-Access-Network-Info header contains country-parameter when MCC is available.reserved,BIT,6,,6,0x3f,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Almost every SIP message contains P-Acess-Network-Info header.<BR>So after modifying the value, make IMS call.<BR>Check the P-Access-Network-Header field. <BR>If the value is set to 0, there is no country parameter<BR>If the bit1 is set to 1, there is country parameter in non-3gpp access<BR>If the bit2 is set to 1, there is country parameter in 3gpp acess.",Pass,,,,
-1619,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cs_volte_feature_tag,ua_config.add_cs_volte_feature_tag,Not Support,no,yes,no,no," Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1619,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_cs_volte_feature_tag,ua_config.add_cs_volte_feature_tag,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR> Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1620,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_framerate,ua_config.add_framerate,OTA and OTA BY OP,no,no,no,no,Add framerate in SDP body.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Video Call<BR>[Expected Result] framerate is included in SDP body of SIP INVITE.,Pass,,,,
1621,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_framerate.add_framerate,ua_config.add_framerate.add_framerate,Not Support,no,no,no,no,[MCF]Add framerate in SDP body.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1622,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_framesize,ua_config.add_framesize,OTA and OTA BY OP,no,no,no,no,Add framesize in SDP body.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Video Call<BR>[Expected Result] framesize is included in SDP body of SIP INVITE.,Pass,,,,
@@ -1626,7 +1626,7 @@
1639,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_rtcp_port_into_sdp.add_rtcp_port_into_sdp,ua_config.add_rtcp_port_into_sdp.add_rtcp_port_into_sdp,Not Support,no,no,no,no,"[MCF]From RFC3605, the RTCP port can be omitted when it is the next higher (odd) port number following the RTP port. But some operators request to present the RTCP port whenever it is. The UE will add RTCP port number when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1640,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_sdp_in_180_for_non_precond,ua_config.add_sdp_in_180_for_non_precond,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>According to IETF RFC3261, IMS add SDP answer in 200 OK, but the IMS can be configured to add SDP answer in 180 Ringing for test cases in 3GPP TS 34.229 while "UA_call_precondition" is disabled.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi. The network does not support precondition<BR>[Test Step] Make MT call<BR>[Expected Result] This configure is set to 1 then the UE will add SDP answer in 180 ringing response; If this configuration is set to 0, the SDP answer will be added in 200 OK response.",Pass,,,,
1641,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_sdp_in_180_for_non_precond.add_sdp_in_180_for_non_precond,ua_config.add_sdp_in_180_for_non_precond.add_sdp_in_180_for_non_precond,Not Support,no,no,no,no,"[MCF]According to RFC3261, IMS add SDP answer in 200 OK, but IMS can be configured to add SDP answer in 180 Ringing for test cases in TS 34.229.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1642,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_timezone_to_pani,ua_config.add_timezone_to_pani,OTA and OTA BY OP,no,no,no,no,Indicate in which rat P-Access-Network-Info header contains local-time-zone parameter.<BR>1:LTE<BR>2:WiFi<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:LTE<BR>2:WiFi,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER brings local-time-zone parameter,Pass,,,,
+1642,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_timezone_to_pani,ua_config.add_timezone_to_pani,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:LTE<BR>2:WiFi,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER brings local-time-zone parameter,Pass,,,,
1643,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_timezone_to_pani.add_timezone_to_pani,ua_config.add_timezone_to_pani.add_timezone_to_pani,Not Support,no,no,no,no,[MCF]Indicate in which rat P-Access-Network-Info header contains local-time-zone parameter.bit 1:1:LTEbit 2:2:WiFi,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1644,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_user_phone,ua_config.add_user_phone,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From 3GPP TS 24.341 5.3.1.2 Submitting a short message, the To header, which shall contain the PSI of the SC of the SM-Over-IP sender shill append the user=phone header parameter. But some operators do not want to add the user=phone header parameter in the TO-Header. The UE add user=phone when this configuration is set 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step] make MO SMS<BR>[Expected Result] <BR> enable: SMS is sent and there is no user=phone parameter in the To header<BR> disable: SMS is sent and there is user=phone parameter in the To header",Pass,,,,
1645,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",add_user_phone.add_user_phone,ua_config.add_user_phone.add_user_phone,Not Support,no,no,no,no,"[MCF]From 3GPP TS 24.341 5.3.1.2 Submitting a short message, the To header, which shall contain the PSI of the SC of the SM-Over-IP sender shill append the user=phone header parameter. But some operators do not want to add the user=phone header parameter in the TO-Header. The UE add user=phone when this configuration is set 1.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1650,9 +1650,9 @@
1663,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",asymmetric_payload_type_enable.asymmetric_payload_type_enable,ua_config.asymmetric_payload_type_enable.asymmetric_payload_type_enable,Not Support,no,no,no,no,[MCF]Enable asymmetric RTP payload type feature which defined in RFC3264bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1664,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",attempt_reg_when_receive403,ua_config.attempt_reg_when_receive403,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From FT/IOT experiences, the UE attempts to send SIP REGISTER request when it receive SIP 403 Forbidden response for SIP INVITE request. Because the operator network may have issues in database when it sents SIP 403 Forbidden. The UE will send SIP REGISTER request to refresh operator network database when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]IMS Register on 4G or WiFi<BR>[Test Step] make IMS call and then hangup the call<BR>[Expected Result] If the network send 403 response, UA will request to send SIP REGISTER request to refresh operator network database when this configuration is set to 1.",Pass,,,,
1665,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",attempt_reg_when_receive403.attempt_reg_when_receive403,ua_config.attempt_reg_when_receive403.attempt_reg_when_receive403,Not Support,no,no,no,no,"[MCF]From FT/IOT experiences, the UE attempts to send REGISTER request when it receive 403 Forbidden for INVITE request. Because the operator network may have issues in database when it sents 403 Forbidden. The UE will send REGISTER request to refresh operator network database when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1666,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",audio_dscp,ua_config.audio_dscp,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED SHORT,2,,,40,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1667,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",audio_priority,ua_config.audio_priority,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED SHORT,2,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1668,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",authorization_with_algo,ua_config.authorization_with_algo,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Authorization header contains algorithm parameter<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if if REGISTER brings algorithm parameter in Authorization header,Pass,,,,
+1666,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",audio_dscp,ua_config.audio_dscp,Not Support,no,yes,no,no,,UNSIGNED SHORT,2,,,40,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1667,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",audio_priority,ua_config.audio_priority,Not Support,no,yes,no,no,,UNSIGNED SHORT,2,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1668,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",authorization_with_algo,ua_config.authorization_with_algo,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if if REGISTER brings algorithm parameter in Authorization header,Pass,,,,
1669,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",authorization_with_algo.authorization_with_algo,ua_config.authorization_with_algo.authorization_with_algo,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Authorization header contains algorithm parameterbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1670,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_unhold_when_rcv_recvonly,ua_config.auto_unhold_when_rcv_recvonly,OTA and OTA BY OP,no,no,no,no,Extra SIP INVITE is used to sync SDP directions with the network after double-hold.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[INIT]<BR>[Test Step]<BR>1. setup a volte call between A and B.<BR>2. A click "Hold" button to hold B.<BR>3. B click "Hold" button to hold A.<BR> A and B change to held state.<BR>4. A click "unHold" button, B will listen prompt sound.<BR>5. B click "unHold" button, call session recoveried between A and B.<BR>[Expected Result]<BR>check if A and B can hear each other.",Pass,,,,
1671,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",auto_unhold_when_rcv_recvonly.auto_unhold_when_rcv_recvonly,ua_config.auto_unhold_when_rcv_recvonly.auto_unhold_when_rcv_recvonly,Not Support,no,no,no,no,[MCF]Extra SIP INVITE is used to sync SDP directions with the network after double-hold.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1688,10 +1688,10 @@
1701,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_emc_rtt_cb_timeout,ua_config.call_emc_rtt_cb_timeout,OTA and OTA BY OP,no,no,no,no,MT auto upgrade timer for RTT call when EMC RTT call is terminated.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
1702,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_id_with_host_inCall,ua_config.call_id_with_host_inCall,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Some operators request to add device address in SIP Call-ID header field. The IMS will add it when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]IMS Register on 4G or WiFi<BR>[Test Step] make IMS call and then hangup the call<BR>[Expected Result] If this parameter is set to 1, Call-ID header field of SIP INVITE will include device address",Pass,,,,
1703,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_id_with_host_inCall.call_id_with_host_inCall,ua_config.call_id_with_host_inCall.call_id_with_host_inCall,Not Support,no,no,no,no,[MCF]Some operators request to add address in CallID header field. The UE will add it when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1704,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_id_with_host_inReg,ua_config.call_id_with_host_inReg,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE uses specific host format(random_string@host) in Call-id header<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if Call-id uses random_string@host format,Pass,,,,
+1704,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_id_with_host_inReg,ua_config.call_id_with_host_inReg,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if Call-id uses random_string@host format,Pass,,,,
1705,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_id_with_host_inReg.call_id_with_host_inReg,ua_config.call_id_with_host_inReg.call_id_with_host_inReg,Not Support,no,no,no,no,[MCF]If UE uses specific host format(random_string@host) in Call-id headerbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1706,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_lte_emc_timer_timeout,ua_config.call_lte_emc_timer_timeout,OTA and OTA BY OP,no,yes,no,no,"This timer is for operator specific LTE emregency call. If timer expired, LTE 911 call will be terminated, UE shall select another system to make the 911 call<BR>default value shall be 20 seconds as operator specific value<BR>unit: sec<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"Test in machine (Y/N) Test Time (minutes) [Init] IMS registered [Test Step] set expected timer value to make the LTE 911 call [Expected Result] if NW dose not response, check timer expired and make 911 call to other domain",Pass,,,,
-1707,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_mo_pidf_usage,ua_config.call_mo_pidf_usage,OTA and OTA BY OP,no,no,no,no,"Bit mask whether to add pidf/location in different kinds of MO calls. Bit 0 means enabled, bit 1 disabled. Location information is considered sensitive information, so this configuration is subject to local legistlation. Specifications: TS 24.229 clause 5.1.6 and RFC 4119.<BR>b0: WFC emergency (default 0)<BR>b1: WFC normal (default 0)<BR>b2: VoLTE emergency (default 1)<BR>b3: VoLTE normal (default 1)<BR>b4: WFC Anonymous emergency call (default 0)<BR>b5: WFC Call with Pre defined numbers(Please see: required_loc_info_num_set) (default 0)<BR>b6: VoLTE Call with Pre defined numbers(Please see: required_loc_info_num_set) (default 1)<BR>b7: reserved<BR>",UNSIGNED CHAR,1,,,0x0C,NR15.R3.MD700.IVT.MP1MR3.MP,,b3:VoLTE normal (default 1)<BR>b0:WFC emergency (default 0)<BR>b1:WFC normal (default 0)<BR>b2:VoLTE emergency (default 1),,,,IMS,IMS,,,"Modify the setting.<BR>Make MO IMS calls, the pidf document in added whenever selected by setting. This can be checked from the SIP messages.<BR>Note! the location information is sensitive information, so this might be hidded in normal logs, so you might need to test this against some test machine to see all the infromation.",Pass,,,,
+1707,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_mo_pidf_usage,ua_config.call_mo_pidf_usage,OTA and OTA BY OP,no,no,no,no,"Bit mask whether to add pidf/location in different kinds of MO calls. Bit 0 means enabled, bit 1 disabled. Location information is considered sensitive information, so this configuration is subject to local legistlation. Specifications: TS 24.229 clause 5.1.6 and RFC 4119.<BR>b0: WFC emergency (default 0)<BR>b1: WFC normal (default 0)<BR>b2: VoLTE emergency (default 1)<BR>b3: VoLTE normal (default 1)<BR>b4-b7: reserved<BR>",UNSIGNED CHAR,1,,,0x0C,NR15.R3.MD700.IVT.MP1MR3.MP,,b3:VoLTE normal (default 1)<BR>b0:WFC emergency (default 0)<BR>b1:WFC normal (default 0)<BR>b2:VoLTE emergency (default 1),,,,IMS,IMS,,,"Modify the setting.<BR>Make MO IMS calls, the pidf document in added whenever selected by setting. This can be checked from the SIP messages.<BR>Note! the location information is sensitive information, so this might be hidded in normal logs, so you might need to test this against some test machine to see all the infromation.",Pass,,,,
1708,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_mo_pidf_usage.b1,ua_config.call_mo_pidf_usage.b1,Not Support,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO calls. Bit 0 means enabled, bit 1 disabled.WFC emergency (default 0)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Modify the setting.<BR>Make MO IMS calls, the pidf document in added whenever selected by setting. This can be checked from the SIP messages.<BR>Note! the location information is sensitive information, so this might be hidded in normal logs, so you might need to test this against some test machine to see all the infromation.",Pass,,,,
1709,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_mo_pidf_usage.b2,ua_config.call_mo_pidf_usage.b2,Not Support,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO calls. Bit 0 means enabled, bit 1 disabled.WFC normal (default 0)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Modify the setting.<BR>Make MO IMS calls, the pidf document in added whenever selected by setting. This can be checked from the SIP messages.<BR>Note! the location information is sensitive information, so this might be hidded in normal logs, so you might need to test this against some test machine to see all the infromation.",Pass,,,,
1710,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",call_mo_pidf_usage.b3,ua_config.call_mo_pidf_usage.b3,OTA and OTA BY OP,no,no,no,no,"[MCF]Bit mask whether to add pidf/location in different kinds of MO calls. Bit 0 means enabled, bit 1 disabled.VoLTE emergency (default 1)",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Modify the setting.<BR>Make MO IMS calls, the pidf document in added whenever selected by setting. This can be checked from the SIP messages.<BR>Note! the location information is sensitive information, so this might be hidded in normal logs, so you might need to test this against some test machine to see all the infromation.",Pass,,,,
@@ -1713,25 +1713,25 @@
1726,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ch_recv,ua_config.ch_recv,OTA and OTA BY OP,no,no,no,no,"From TS 26.445, this item is valid when the EVS mode is Primary mode. In SDP attribute, it is used to specify the number of audio channels to be used in the session for the recive direction. The value is from 1 to the maximum number of audio channels.<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] ch-recv is included in SDP body of SIP INVITE.,Pass,,,,
1727,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ch_send,ua_config.ch_send,OTA and OTA BY OP,no,no,no,no,"From TS 26.445, this item is valid when the EVS mode is Primary mode. In SDP attribute, it is used to specify the number of audio channels to be used in the session for the send direction. The value is from 1 to the maximum number of audio channels.<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] ch-send is included in SDP body of SIP INVITE.,Pass,,,,
1728,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_380_xml_with_no_action,ua_config.check_380_xml_with_no_action,Not Support,no,no,no,no,If enabled UE omit SIP INVITE 380 response XML Action element content if Type element content is emergency and if contact header is missing from 380 response.<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS Register on 4G, and enable VoLTE. Test equipment must send specific 380 response<BR>[Test Step]<BR>1. Initiate VoLTE call.<BR>2. Make network simulator to send 380 response to MO INVITE<BR>[Expected Result] <BR>Enabled: 380 XML action element content is omitted for normal call 380 response and UE may dial normal call as over next domain,<BR>Disabled: 380 XML action element content 'emergency-registration' always trigger emergency call over next domain."",Untested,,,,
-1729,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_call_domain,ua_config.check_call_domain,Not Support,no,yes,no,no," Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1729,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_call_domain,ua_config.check_call_domain,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR> Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1730,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_conference_subscribe,ua_config.check_conference_subscribe,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From 3GPP TS 24.147, the IMS is able to do conference subscribe event package when conference response contains 'conference' tag in Allow-Event header field. But most operators do not add the header field to check. The IMS will check the header field when the configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] After two calls are merged, the SIP SUBSCRIBE request is sent if the response from conference focus server has included 'conference' tag in Allow-Event header field and this configuration is set 1.",Pass,,,,
1731,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_conference_subscribe.check_conference_subscribe,ua_config.check_conference_subscribe.check_conference_subscribe,Not Support,no,no,no,no,"[MCF]From TS 24.147, the UE is able to do conference subscribe event package when conference response contains 'conference' tag in Allow-Event header field. But most operators do not add the header field to check. The UE will check the header field when the configuration is set to 1.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1732,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_contact_380,ua_config.check_contact_380,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>In 3GPP TS 24.229 5.1.6 and TS 34.229 release 11 PCT test cases, the emergency type is added in Contact header field in SIP 380 alternative service response. If this configuration is set to enable, the IMS only check Contact header field and make a emergency CS call with a specific emergency type. (without check XML body)<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] If the network send 380 response for the calls, UA will check Contact header field according to TS 24.229 5.1.6 if the cofiguration is set to 1",Pass,,,,
1733,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_contact_380.check_contact_380,ua_config.check_contact_380.check_contact_380,Not Support,no,no,no,no,"[MCF]For TS 34.229 release 11 PCT test cases, the emergency type can be added in Contact header field in 380 alternative service response (not only in XML body). And the UE shall make a emergency CS call with a specific emergency type. The UE can be configured to support it or not.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1734,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_curr_qos,ua_config.check_curr_qos,OTA and OTA BY OP,no,no,no,no,Check remote qos is to send UPDATE for precondition eventhough remote did not include conf attribute parameter<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,," Test in machine (Y/N) <BR> Test Time (minutes) <BR> [Init] IMS registered and NW dose not support sdp conf parameter<BR> [Test Step] <BR> 1. make MO call <BR> [Expected Result] make call successfully",Pass,,,,
1735,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_curr_qos.check_curr_qos,ua_config.check_curr_qos.check_curr_qos,Not Support,no,no,no,no,[MCF]Check remote qos is to send UPDATE for precondition eventhough remote did not include conf attribute parameterbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1736,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_msisdn,ua_config.check_msisdn,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER should use MSISDN-based URI if it is valid<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[init] ims register [this is used for vzw]<BR>[Test Step] set value 0 or 1<BR>[Expected Result] check if the value enabled ,UE will use MSISDN based registration",Pass,,,,
+1736,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_msisdn,ua_config.check_msisdn,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[init] ims register [this is used for vzw]<BR>[Test Step] set value 0 or 1<BR>[Expected Result] check if the value enabled ,UE will use MSISDN based registration",Pass,,,,
1737,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_msisdn.check_msidsn,ua_config.check_msisdn.check_msidsn,Not Support,no,no,no,no,[MCF]Indicate if REGISTER should use MSISDN-based URI if it is validbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1738,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_notify_instance_id,ua_config.check_notify_instance_id,Not Support,no,yes,no,no," Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1738,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_notify_instance_id,ua_config.check_notify_instance_id,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR> Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1739,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_reason_phrase,ua_config.check_reason_phrase,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>The IMS in default is to do re-registration when receive SIP 403 Forbidden response. This configure is to do re-registration only when receive 403 Forbidden with Reason - Originating user not registered. <BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi. <BR>[Test Step] Make MO call and then merge the network send 403 Forbidden response with Reason header field.<BR>[Expected Result] This configure is to do re-registration only when receive 403 Forbidden with Reason - Originating user not registered.,Pass,,,,
1740,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_reason_phrase.check_reason_phrase,ua_config.check_reason_phrase.check_reason_phrase,Not Support,no,no,no,no,[MCF]IMS do re-registration when receive 403 Forbidden with Reason - Originating user not registered for Verizon customization. Default is to do re-registration without checking Reason header field.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1741,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_reg_contact,ua_config.check_reg_contact,OTA and OTA BY OP,no,no,no,no,Check for contact URI match. if enabled then contact URI in REGISTER request must match to the response from registrar.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] SIP Response for REGISTER from server may contain two URI (one is old id)<BR>[Test Step] Let the DUT DeRegister<BR>[Expected Result] <BR> enable: will not match contact URI in request and response<BR> disable: Will ensure contact URI is exact same in request and response,Pass,,,,
+1741,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_reg_contact,ua_config.check_reg_contact,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] SIP Response for REGISTER from server may contain two URI (one is old id)<BR>[Test Step] Let the DUT DeRegister<BR>[Expected Result] <BR> enable: will not match contact URI in request and response<BR> disable: Will ensure contact URI is exact same in request and response,Pass,,,,
1742,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_reg_contact.check_reg_contact,ua_config.check_reg_contact.check_reg_contact,Not Support,no,no,no,no,[MCF]Check for contact URI match. if enabled then contact URI in REGISTER request must match to the response from registrar.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1743,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_roam_vops,ua_config.check_roam_vops,Not Support,no,no,no,no,This configuration is used for deciding to set mmtel feature tag in SIP REGISTER while receiving VoPS=False in VPLMN<BR>0:Set mmtel feature tag in SIP REGISTER while receving VoPS=Flase in VPLMN<BR>1:DO NOT set mmtel feature tag in SIP REGISTER while receving VoPS=Flase in VPLMN<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1744,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",check_roam_vops.check_roam_vops,ua_config.check_roam_vops.check_roam_vops,Not Support,no,no,no,no,[MCF]This configuration is used for deciding to set mmtel feature tag in SIP REGISTER while receiving VoPS=False in VPLMNbit 0:0:Set mmtel feature tag in SIP REGISTER while receving VoPS=Flase in VPLMNbit 1:1:DO NOT set mmtel feature tag in SIP REGISTER while receving VoPS=Flase in VPLMN,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1745,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cisrvcc,ua_config.cisrvcc,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>SRVCC feature category.<BR>This is set by AT command and should not be configured manually. Refer to 3GPP TS27.007 AT+CISRVCC.<BR>0: disable<BR>1: enable<BR>,UNSIGNED INT,4,,,0xffffffff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,Deprecated. This one shall not be used by customer because it is related to AT command,Untested,,,,
1746,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cisrvcc.cisrvcc,ua_config.cisrvcc.cisrvcc,Not Support,no,no,no,no,[MCF]SRVCC feature category. Refer to TS27.007 AT+CISRVCCbit 0:0:Disablebit -1:-1:Enable,BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1747,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",close_unprotected_conn,ua_config.close_unprotected_conn,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1747,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",close_unprotected_conn,ua_config.close_unprotected_conn,Not Support,no,yes,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1748,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cmr,ua_config.cmr,OTA and OTA BY OP,no,no,no,no,"This is used to configure Codec Mode Requests in EVS codec. In SDP attribute, the permissible values are -1, 0, and 1. If cmr is 1, CMR shall be present in each packet.<BR>0:Disable<BR>1:Enable<BR>",CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] cmr is included in SDP body of SIP INVITE.,Pass,,,,
1749,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cmr.cmr,ua_config.cmr.cmr,Not Support,no,no,no,no,"[MCF]This is used to configure Codec Mode Requests in EVS codec. In SDP attribute, the permissible values are -1, 0, and 1. If cmr is 1, CMR shall be present in each packet.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1750,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conf_participant_not_subscribe,ua_config.conf_participant_not_subscribe,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>When a participant is invited to a conference call, the conference participant may subscribe to the conference event package according to section 5.3.1.4.1 of 3GPP TS 24.147. The UE is able to configure to send SUBSCRIBE or not when it receive 'isfocus' in Contact header field.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] The participant will not send SIP SUBSCRIBE request to get the conference information if this configuration is st 1,Pass,,,,
@@ -1744,43 +1744,43 @@
1757,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conference_desub_time,ua_config.conference_desub_time,OTA and OTA BY OP,no,no,no,no,"Time that UE waits de-subscription from conference event package after conference call is terminated. If the NOTIFY is not received when timer expires, the UE will send SUBSCRIBE to de-subcribe the conference package.Specifications: TS 24.147 subclause 5.3.1.6.1 and RFC 4575<BR>range:0-255<BR>unit: sec<BR>",UNSIGNED CHAR,1,,,30,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"- Special test cases where no NOTIFY is sent to the UE after the conference call is ended.<BR>Configure the timer to desired value, check that after the timeout the UE will send de-SUBSCRIBE for conference-event.",Pass,,,,
1758,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conference_subscribe_timing,ua_config.conference_subscribe_timing,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>SIP SUBSCRIBE request is sent after all calls are merged, however some operators require to send SIP SUBSCRIBE request right after conference call is established with conference focus server. If this is set to 1, then SIP SUBSCRIBE request is sent right after conference call is established with the conference focus server.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] After two calls are merged, the SIP SUBSCRIBE request is sent if this configuration is set to 0. After the call to conference focus server is established, the SIP SUBSCRIBE request is sent if the configuration is set to 1.",Pass,,,,
1759,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",conference_subscribe_timing.conference_subscribe_timing,ua_config.conference_subscribe_timing.conference_subscribe_timing,Not Support,no,no,no,no,"[MCF]In test cases of TS 34.229, SUBSCRIBE request is sent after all calls are merged, however some operators require to send SUBSCRIBE right after conference call is established with conference focus server.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1760,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_wildcard_dereg,ua_config.contact_wildcard_dereg,OTA and OTA BY OP,no,no,no,no,Indicate if de-REGISTER uses wildcard in Contact header<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] Volte Network supports wildcard in contact header<BR>[Test Step] Let the DUT DeRegister<BR>[Expected Result] <BR> enable: deREGISTER SIP Message with wildchar in contact header<BR> disable: regular deREGISTER SIP message observed,Pass,,,,
+1760,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_wildcard_dereg,ua_config.contact_wildcard_dereg,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] Volte Network supports wildcard in contact header<BR>[Test Step] Let the DUT DeRegister<BR>[Expected Result] <BR> enable: deREGISTER SIP Message with wildchar in contact header<BR> disable: regular deREGISTER SIP message observed,Pass,,,,
1761,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_wildcard_dereg.contact_wildcard_dereg,ua_config.contact_wildcard_dereg.contact_wildcard_dereg,Not Support,no,no,no,no,[MCF]Indicate if de-REGISTER uses wildcard in Contact headerbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1762,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_accesstype,ua_config.contact_with_accesstype,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Contact header contains +g.3gpp.accesstype<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if REGISTER Contact header contains +g.3gpp.accesstype,Pass,,,,
+1762,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_accesstype,ua_config.contact_with_accesstype,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if REGISTER Contact header contains +g.3gpp.accesstype,Pass,,,,
1763,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_accesstype.contact_with_accesstype,ua_config.contact_with_accesstype.contact_with_accesstype,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Contact header contains +g.3gpp.accesstypebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1764,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_expires,ua_config.contact_with_expires,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if registration expiration interval is contained in Contact header expires parameter or in standalone Expires header.<BR>0:Expires header<BR>1:Contact header with expires parameter<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Contact header with expires parameter<BR>0:Expires header,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs "expires" parameter in Contact header,Pass,,,,
+1764,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_expires,ua_config.contact_with_expires,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Contact header with expires parameter<BR>0:Expires header,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs "expires" parameter in Contact header,Pass,,,,
1765,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_expires.contact_with_expires,ua_config.contact_with_expires.contact_with_expires,Not Support,no,no,no,no,[MCF]Indicate if registration expiration interval is contained in Contact header expires parameter or in standalone Expires header.bit 0:0:Expires headerbit 1:1:Contact header with expires parameter,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1766,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_mobility,ua_config.contact_with_mobility,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Contact header contains mobility parameter<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs "mobility" parameter in Contact header,Pass,,,,
+1766,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_mobility,ua_config.contact_with_mobility,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs "mobility" parameter in Contact header,Pass,,,,
1767,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_mobility.contact_with_mobility,ua_config.contact_with_mobility.contact_with_mobility,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Contact header contains mobility parameterbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1768,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_regid,ua_config.contact_with_regid,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Contact header contains regid parameter<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs "reg-id" parameter in Contact header,Pass,,,,
+1768,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_regid,ua_config.contact_with_regid,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if REGISTER birngs "reg-id" parameter in Contact header,Pass,,,,
1769,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_regid.contact_with_regid,ua_config.contact_with_regid.contact_with_regid,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Contact header contains regid parameterbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1770,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_transport,ua_config.contact_with_transport,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Contact header contains transport parameter<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if transport parameter appears in Contact header URI parameter list,Pass,,,,
+1770,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_transport,ua_config.contact_with_transport,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if transport parameter appears in Contact header URI parameter list,Pass,,,,
1771,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_transport.contact_with_transport,ua_config.contact_with_transport.contact_with_transport,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Contact header contains transport parameterbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1772,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_username,ua_config.contact_with_username,OTA and OTA BY OP,no,no,no,no,Indicate if REGISTER Contact header URI contains username<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if username appears in Contact header URI,Pass,,,,
+1772,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_username,ua_config.contact_with_username,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,steps: IMS registration<BR>=> check if username appears in Contact header URI,Pass,,,,
1773,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_username.contact_with_username,ua_config.contact_with_username.contact_with_username,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Contact header URI contains usernamebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1774,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_username_inCall,ua_config.contact_with_username_inCall,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>In IETF RFC3261, the user name part shall not be added in Contact header, but it is required in some server.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,""[Init] IMS Register over LTE or VoWiFi. The network suppport the username in SIP Contact header field of SIP messages<BR>[Test Step] Make MO call<BR>[Expected Result] If the network need username in SIP Contact header field, then this configuration is set to 1."",Pass,,,,
1775,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_username_inCall.contact_with_username_inCall,ua_config.contact_with_username_inCall.contact_with_username_inCall,Not Support,no,no,no,no,"[MCF]In RFC3261, the user name part shall not be added in Contact header, but it is required in some server.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1776,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_video_feature_tag_in_subscribe,ua_config.contact_with_video_feature_tag_in_subscribe,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if SUBSCRIBE contact header should contain video feature tag<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] video feature is turnned on<BR>[Test Step] IMS registration<BR>[Expected Result] check if if SUBSCRIBE brings "video" feature tag in Contact header,Pass,,,,
+1776,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_video_feature_tag_in_subscribe,ua_config.contact_with_video_feature_tag_in_subscribe,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] video feature is turnned on<BR>[Test Step] IMS registration<BR>[Expected Result] check if if SUBSCRIBE brings "video" feature tag in Contact header,Pass,,,,
1777,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",contact_with_video_feature_tag_in_subscribe.contact_with_video_feature_tag_in_subscribe,ua_config.contact_with_video_feature_tag_in_subscribe.contact_with_video_feature_tag_in_subscribe,Not Support,no,no,no,no,[MCF]Indicate if SUBSCRIBE contact header should contain video feature tagbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1778,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cs_availability_query,ua_config.cs_availability_query,OTA and OTA BY OP,no,no,no,no,Query whether CS network is avalable before attempt a CSFB<BR>0: No CS availability query<BR>1: CS availability query in use<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:No CS availability query<BR>1:CS availability query in use,,,,IMS,IMS,,,"[Init] IMS Register over VoWiFi<BR>[Test Step] MO Call attempt without response from network<BR>[Expected Result] When feature is UE should use CSFB if CS netowork is available. If CS network is not available UE tries call over VoWiFi until SIP transaction timer expires.",Pass,,,,
1779,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cs_availability_query.cs_availability_query,ua_config.cs_availability_query.cs_availability_query,Not Support,no,no,no,no,[MCF]Query whether CS network is avalable before attempt a CSFBbit 0:0:No CS availability querybit 1:1:CS availability query in use,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1780,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cur_loc_for_emergency_enable,ua_config.cur_loc_for_emergency_enable,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>R14 - Send current location in SIP PUBLISH for emergency call.<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Deprecated,Untested,,,,
1781,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",cur_loc_for_emergency_enable.cur_loc_for_emergency_enable,ua_config.cur_loc_for_emergency_enable.cur_loc_for_emergency_enable,Not Support,no,no,no,no,[MCF]R14 - Send current location in SIP PUBLISH for emergency call.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1782,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",de_subscribe,ua_config.de_subscribe,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE sends de-SUBSCRIBE(SUBSCRIBE with Expires set to 0) during de-registration<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"steps: IMS registration, enter flight moe<BR>=> check if UE sends de-SUBSCRIBE message",Pass,,,,
+1782,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",de_subscribe,ua_config.de_subscribe,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"steps: IMS registration, enter flight moe<BR>=> check if UE sends de-SUBSCRIBE message",Pass,,,,
1783,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",de_subscribe.de_subscribe,ua_config.de_subscribe.de_subscribe,Not Support,no,no,no,no,[MCF]If UE sends de-SUBSCRIBE(SUBSCRIBE with Expires set to 0) during de-registrationbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1784,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",decouple_conf_srvcc_mid_call_cap,ua_config.decouple_conf_srvcc_mid_call_cap,OTA and OTA BY OP,no,no,no,no,Support conference call SRVCC even if UE is not configured to support mid-call SRVCC.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS register on 4G & set up up a conference call<BR>[Test Step] Do SRVCC<BR>[Expected Result]<BR>SRVCC succeeds.,Pass,,,,
1785,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",decouple_conf_srvcc_mid_call_cap.decouple_conf_srvcc_mid_call_cap,ua_config.decouple_conf_srvcc_mid_call_cap.decouple_conf_srvcc_mid_call_cap,Not Support,no,no,no,no,[MCF]Support conference call SRVCC even if UE is not configured to support mid-call SRVCC.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1786,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_reg_retry_mechanism,ua_config.default_reg_retry_mechanism,OTA and OTA BY OP,no,no,no,no,Indicate registration retry mechanism<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]Simulate NW to assign 1 PCSCF to UE, and reply 503 to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check when registration failed, if 1st registration retry is after 30 seconds",Pass,,,,
+1786,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_reg_retry_mechanism,ua_config.default_reg_retry_mechanism,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]Simulate NW to assign 1 PCSCF to UE, and reply 503 to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check when registration failed, if 1st registration retry is after 30 seconds",Pass,,,,
1787,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",default_reg_retry_mechanism.default_reg_retry_mechanism,ua_config.default_reg_retry_mechanism.default_reg_retry_mechanism,Not Support,no,no,no,no,[MCF]Indicate registration retry mechanismbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1788,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",delay_normal_or_em_reg_if_they_occur_simulta,ua_config.delay_normal_or_em_reg_if_they_occur_simulta,OTA and OTA BY OP,no,no,no,no,"because P-CSCF can not handle registration and emergence registration simultaneously.<BR>if normal registration is ongoing, delay x seconds to do emergency regstration.<BR>if emergency registration is ongoing, delay x seconds to do normal registration.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N) N<BR> Test Time (minutes) N<BR> [Init] delay_normal_or_em_reg_if_they_occur_simulta = 1<BR>Real NW: not support normal registration and emergency registration simultaneously.<BR> [Test Step] <BR>1. UE enter flight mode.<BR>2. dial emergency call number<BR> [Expected Result]<BR>emergency call set up successfully.,Pass,,,,
1789,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",delay_ringing,ua_config.delay_ringing,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Delay CRING to AP after the UE receives PRACK request. It is to secure the network receives the 180 ringing from the UE.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Deprecated,Untested,,,,
1790,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",delay_ringing.delay_ringing,ua_config.delay_ringing.delay_ringing,Not Support,no,no,no,no,[MCF]Delay CRING to AP after the UE receives PRACK request. It is to secure the network receives the 180 ringing from the UE.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1791,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",delay_unhold_call,ua_config.delay_unhold_call,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>This is to request remote unhold call when receive reINVITE without SDP during remote hold call.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make MO call and then hold call, and then unhold call<BR>[Expected Result] if this parameter is 1 and the network send reINVITE without SDP to UA, UA will treat it as unhold operation. If not, UA will treat it as session refresher.",Pass,,,,
1792,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",delay_unhold_call.delay_unhold_call,ua_config.delay_unhold_call.delay_unhold_call,Not Support,no,no,no,no,[MCF]Remote unhold call when receive reINVITE without SDP during remote hold call.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1793,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_clear_ipsec,ua_config.dereg_clear_ipsec,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if IPSec channel is reset after de-registration is done<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,UT will cover,Pass,,,,
+1793,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_clear_ipsec,ua_config.dereg_clear_ipsec,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,UT will cover,Pass,,,,
1794,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_clear_ipsec.dereg_clear_ipsec,ua_config.dereg_clear_ipsec.dereg_clear_ipsec,Not Support,no,no,no,no,[MCF]Indicate if IPSec channel is reset after de-registration is donebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1795,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_delay_time,ua_config.dereg_delay_time,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>unit: sec<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] UCE(Presence) feature or RCS featuer is turnned on<BR>[Test Step] IMS registration<BR>[Expected Result] check if de-REGISTER is sent before un-PUBLISH,Pass,,,,
-1796,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_reset_tcp_client,ua_config.dereg_reset_tcp_client,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if unprotected tcp connection is reset after de-registration is done<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"steps: IMS registration, enter flight moe<BR>=> check if UE close unprotected TCP connection after de-registration is done",Pass,,,,
+1795,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_delay_time,ua_config.dereg_delay_time,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] UCE(Presence) feature or RCS featuer is turnned on<BR>[Test Step] IMS registration<BR>[Expected Result] check if de-REGISTER is sent before un-PUBLISH,Pass,,,,
+1796,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_reset_tcp_client,ua_config.dereg_reset_tcp_client,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"steps: IMS registration, enter flight moe<BR>=> check if UE close unprotected TCP connection after de-registration is done",Pass,,,,
1797,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_reset_tcp_client.dereg_reset_tcp_client,ua_config.dereg_reset_tcp_client.dereg_reset_tcp_client,Not Support,no,no,no,no,[MCF]Indicate if unprotected tcp connection is reset after de-registration is donebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1798,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_send_bye,ua_config.dereg_send_bye,OTA and OTA BY OP,no,no,no,no,"This is to send SIP BYE request to terminate call while doing IMS deregistration. In default, the IMS releases the call sessions locally without sending any SIP message.<BR>0:UE local release call<BR>1:send SIP BYE to terminate call<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:UE local release call<BR>1:send SIP BYE to terminate call,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make MO call and then disable VOLTE or enter to flight mode.<BR>[Expected Result] If this configuration is set to 1, then the UE will send SIP BYE request for the MO call.",Untested,,,,
1799,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dereg_send_bye.dereg_send_bye,ua_config.dereg_send_bye.dereg_send_bye,Not Support,no,no,no,no,[MCF]UE send BYE to terminate call while doing IMS deregistrationbit 0:0:UE local release callbit 1:1:send SIP BYE to terminate call,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1802,9 +1802,9 @@
1815,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dtx_recv.dtx_recv,ua_config.dtx_recv.dtx_recv,Not Support,no,no,no,no,"[MCF]From TS 26.445, permissible values are 0 and 1. It is used to configure if DTX is enable or disable in SDP attribute.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1816,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dynamic_pdn_mtu,ua_config.dynamic_pdn_mtu,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>SIP TCP/UDP threshold caculate by dynamic PDN MTU<BR>0: Use fix PDM MTU size<BR>1: Use dynamic PDN MTU size<BR>VoLTE_Setting_SIP_TCP_MTU_Size<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Use fix PDM MTU size<BR>1:Use dynamic PDN MTU size,,,,IMS,IMS,,,(1) set dynamic_pdn_mtu to '1'<BR>(2) check SIP TCP/UDP threhold whether following UE APN table,Pass,,,,
1817,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",dynamic_pdn_mtu.dynamic_pdn_mtu,ua_config.dynamic_pdn_mtu.dynamic_pdn_mtu,Not Support,no,no,no,no,[MCF]SIP TCP/UDP threshold caculate by dynamic PDN MTUbit 0:0:Use fix PDM MTU sizebit 1:1:Use dynamic PDN MTU size,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
-1818,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",e2_emc_setup_initiation_timer,ua_config.e2_emc_setup_initiation_timer,Not Support,no,yes,no,no,"Operator specific, not recommend to change.<BR>This timer is for EMC setup initiation in seconds.<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
-1819,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",e3_emc_setup_catch_all_home_timer,ua_config.e3_emc_setup_catch_all_home_timer,Not Support,no,yes,no,no,"Operator specific, not recommend to change.<BR>This timer is for EMC setup catch all when home in seconds.<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
-1820,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",e3_emc_setup_catch_all_roaming_timer,ua_config.e3_emc_setup_catch_all_roaming_timer,Not Support,no,yes,no,no,"Operator specific, not recommend to change.<BR>This timer is for EMC setup catch all when roaming in seconds.<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
+1818,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",e2_emc_setup_initiation_timer,ua_config.e2_emc_setup_initiation_timer,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Operator specific, not recommend to change.<BR>This timer is for EMC setup initiation in seconds.<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
+1819,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",e3_emc_setup_catch_all_home_timer,ua_config.e3_emc_setup_catch_all_home_timer,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Operator specific, not recommend to change.<BR>This timer is for EMC setup catch all when home in seconds.<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
+1820,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",e3_emc_setup_catch_all_roaming_timer,ua_config.e3_emc_setup_catch_all_roaming_timer,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Operator specific, not recommend to change.<BR>This timer is for EMC setup catch all when roaming in seconds.<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Internal Use,Untested,,,,
1821,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",early_media,ua_config.early_media,Not Support,no,no,no,no,"Against to P-Early-Media header field that network support the earlt media announcement, the IMS UE can support announcement from UE during receiving a call. This is to set enable/disable early-media on UE. For network support early media announcement, it is supported by default.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Deprecated. The functionality in UA is supported but the UE does not support to play early media,Untested,,,,
1822,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",early_media.early_media,ua_config.early_media.early_media,Not Support,no,no,no,no,[MCF]Enable/disable early-mediabit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1823,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",early_media_when_rtp_coming,ua_config.early_media_when_rtp_coming,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Whether to play early-media even without P-Early-Media header. In many networks the P-Early-Media header indicates the start of early media (in band tones), but in some cases this header is not used and early media could be detected from RTP packets containing audio. Specification: RFC 5009<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]IMS REGISTER on 4G <BR>configure network (or find network) which does not send P-Early-Media header in call setup<BR>[Test step] Make VoLTE MO call<BR>After voice bearer setup and SDP negotiation, send RTP audio to the UE, but do not add P-Early-Media header in SIP messages<BR>The other way to test is to delay the SIP message containing the P-Early-Media header by few secodns, and check when audios are header in the UE.<BR>[Expected result]<BR>enabled: audio heard during call setup <BR>disalbed:audio not heard during call setup",Pass,,,,
@@ -1834,9 +1834,9 @@
1847,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ect_without_target_hold.ect_without_target_hold,ua_config.ect_without_target_hold.ect_without_target_hold,Not Support,no,no,no,no,[MCF]bit 0:0:ECT transferor set transfer target on hold before sending REFER to transfereebit 1:1:ECT transferor does not set transfer target on hold before sending REFER to transferee,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1848,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emc_call_ringback_timer_timeout,ua_config.emc_call_ringback_timer_timeout,OTA and OTA BY OP,no,no,no,no,Ringback timer for emergency<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register on 4G and NW support IMS emergency call<BR>[Test Step] make 911 emergency volte call<BR>[Expected Result] UE can wait final response of NW for time period in ringing state<BR> 0: no special timer function for emergency call<BR> other value: start special timer for emergency call for Ringback timer,Pass,,,,
1849,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emc_cits_protect_timer,ua_config.emc_cits_protect_timer,OTA and OTA BY OP,no,no,no,no,"Set the INVITE Client transaction alive time, if no response received for E911 call. <BR>unit: sec<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] Power on<BR>[Test Step] <BR>1.UE make a E911 call<BR>2.NW don't respond UE after 180 ringing<BR>[Expected Result]<BR>UE will keep the emergency call emc_cits_protect_timer seconds(if emc_cits_protect_timer is 0, it will keepp 5 minutes)",Pass,,,,
-1850,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_use_imsi,ua_config.emergency_use_imsi,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if emergency registration uses IMSI-based URI<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiF ;<BR>2.start a emergency call;<BR>[Expected Result] <BR>emergency registration uses IMSI-based URI.,Pass,,,,
+1850,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_use_imsi,ua_config.emergency_use_imsi,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiF ;<BR>2.start a emergency call;<BR>[Expected Result] <BR>emergency registration uses IMSI-based URI.,Pass,,,,
1851,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",emergency_use_imsi.emergency_use_imsi,ua_config.emergency_use_imsi.emergency_use_imsi,Not Support,no,no,no,no,[MCF]Indicate if emergency registration uses IMSI-based URIbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
-1852,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ems_mode_ind,ua_config.ems_mode_ind,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if IMS reports emergency call preference<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,internal used,Untested,,,,
+1852,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ems_mode_ind,ua_config.ems_mode_ind,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,internal used,Untested,,,,
1853,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ems_mode_ind.ems_mode_ind,ua_config.ems_mode_ind.ems_mode_ind,Not Support,no,no,no,no,[MCF]Indicate if IMS reports emergency call preferencebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1854,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_in_band_tone_in_hold,ua_config.enable_in_band_tone_in_hold,OTA and OTA BY OP,no,no,no,no,Enable in-band tone in hold. If network does not use P-Early-Media header correctly this prevents double hold tone scenario.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,""[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO call. MO hold, MO retrieve, MT hold and MT retrieve<BR>[Expected Result] If feature is enabled network generated tone can be heard<BR>"",Pass,,,,
1855,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",enable_in_band_tone_in_hold.enable_in_band_tone_in_hold,ua_config.enable_in_band_tone_in_hold.enable_in_band_tone_in_hold,Not Support,no,no,no,no,[MCF]Enable in-band tone in hold. If network does not use P-Early-Media header correctly this prevents double hold tone scenario.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1870,7 +1870,7 @@
1883,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",from_header_peer_addr,ua_config.from_header_peer_addr,OTA and OTA BY OP,no,no,no,no,"When UE receive the incoming call, UE should decide which value should be used as calling number, this feature can control the rule about selection order . FromPreferred (Configurations requested in IR.92 v11.0) is related to this function.<BR>0:Privacy, P-Asserted-Identity(always ignore From header)<BR>1:From Header (always ignore P-Asserted-Identity and privacy header)<BR>2:Privacy, P-Asserted-Identity, From header (deafult)<BR>",UNSIGNED CHAR,1,,,2,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Privacy, P<BR>1:From Header (always ignore P<BR>2:Privacy, P",,,,IMS,IMS,,,"[Init]Registration over LTE and Volte enable<BR>[Test Step]Make a volte call<BR>[Expected Result]<BR>0: the UI number is from P-Asserted-Identity and it's NULL if P-Asserted_Identity is absent<BR>1: the UI number is from FROM header<BR>2: the UI number is from P-Asserted-Identity and it will be got from FROM header if P-Asserted_Identity is absent",Pass,,,,
1884,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",general_amr_nb_wb,ua_config.general_amr_nb_wb,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>The UE is requested to add both octet-align=0 and octet-align=1 in AMR and AMR-WB codec when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Internal Use,Untested,,,,
1885,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",general_amr_nb_wb.general_amr_nb_wb,ua_config.general_amr_nb_wb.general_amr_nb_wb,Not Support,no,no,no,no,[MCF]The UE is requested to add both octet-align=0 and octet-align=1 in AMR and AMR-WB codec when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1886,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",geolocation_type,ua_config.geolocation_type,OTA and OTA BY OP,no,no,no,no,"Indicate what kind of information should be taken in REGISTER PIDF.<BR>0:Unspecific<BR>1:Longitude, latitude<BR>2:Country<BR>3:Longitude, latitude, country, state<BR>4:Longitude, latitude, country, state, city, zip<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Unspecific<BR>1:Longitude, latitude<BR>2:Country<BR>3:Longitude, latitude, country, state<BR>4:Longitude, latitude, country, state, city, zip",,,,IMS,IMS,,,"[Init] enable flight mode<BR>[Test Step] reboot, enable wifi, IMS registration over wifi<BR>[Expected Result] check if time interval between "do reg" & "imcb_send_ua_reg_req" will be init_reg_delay_time",Pass,,,,
+1886,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",geolocation_type,ua_config.geolocation_type,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:Unspecific<BR>1:Longitude, latitude<BR>2:Country<BR>3:Longitude, latitude, country, state<BR>4:Longitude, latitude, country, state, city, zip",,,,IMS,IMS,,,"[Init] enable flight mode<BR>[Test Step] reboot, enable wifi, IMS registration over wifi<BR>[Expected Result] check if time interval between "do reg" & "imcb_send_ua_reg_req" will be init_reg_delay_time",Pass,,,,
1887,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",geolocation_type.geolocation_type,ua_config.geolocation_type.geolocation_type,Not Support,no,no,no,no,"[MCF]Indicate what kind of information should be taken in REGISTER PIDF.bit 0:0:Unspecificbit 1:1:Longitude, latitudebit 2:2:Countrybit 3:3:Longitude, latitude, country, statebit 4:4:Longitude, latitude, country, state, city, zip",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1888,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",hf_only,ua_config.hf_only,OTA and OTA BY OP,no,no,no,no,"From TS 26.445, permissible values are 0 and 1. This is used to configure Header-Full-only format in SDP attribute. In the Header-Full format, the payload consists of one or more coded frame(s) with EVS RTP payload header(s).<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO Call<BR>[Expected Result] hf-only is included in SDP body of SIP INVITE.",Pass,,,,
1889,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",hf_only.hf_only,ua_config.hf_only.hf_only,Not Support,no,no,no,no,"[MCF]From TS 26.445, permissible values are 0 and 1. This is used to configure Header-Full-only format in SDP attribute. In the Header-Full format, the payload consists of one or more coded frame(s) with EVS RTP payload header(s).bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1886,28 +1886,28 @@
1899,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ims_notify_feature_enabled.ims_notify_feature_enabled,ua_config.ims_notify_feature_enabled.ims_notify_feature_enabled,Not Support,no,no,no,no,"[MCF]Enable the indication from data plane to control plane when RTP/RTCP timeout, UE will disconnect the call .bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1900,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",imsi_reged_disable_sms,ua_config.imsi_reged_disable_sms,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>IMS can be configured to reject MO SMS when IMS is registered by IMSI.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Internal Use,Untested,,,,
1901,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",imsi_reged_disable_sms.imsm_reged_disable_sms,ua_config.imsi_reged_disable_sms.imsm_reged_disable_sms,Not Support,no,no,no,no,[MCF]IMS can be configured to reject MO SMS when IMS is registered by IMSI.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1902,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",init_reg_backoff_enabled,ua_config.init_reg_backoff_enabled,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1903,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",init_reg_delay_time,ua_config.init_reg_delay_time,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>unit: sec<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] enable flight mode, turn off location service<BR>[Test Step] reboot, enable wifi, IMS registration over wifi<BR>[Expected Result] check AP log(main log) if time interval between "do reg" & "imcb_send_ua_reg_req" will be init_reg_delay_time",Pass,,,,
+1902,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",init_reg_backoff_enabled,ua_config.init_reg_backoff_enabled,Not Support,no,yes,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1903,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",init_reg_delay_time,ua_config.init_reg_delay_time,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] enable flight mode, turn off location service<BR>[Test Step] reboot, enable wifi, IMS registration over wifi<BR>[Expected Result] check AP log(main log) if time interval between "do reg" & "imcb_send_ua_reg_req" will be init_reg_delay_time",Pass,,,,
1904,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",init_reg_guard_timer,ua_config.init_reg_guard_timer,Not Support,no,yes,no,no,This is used for REG to release priority 0 MSPM procedure when the NW do not reply register.<BR>it should be larger than 0<BR>Unit:sec<BR>this should set dep to AP/MD interface version 0x72<BR>,UNSIGNED CHAR,1,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,Not Support,IMS,IMS,,,Not Support,Untested,,,,
-1905,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",initial_reg_without_pani,ua_config.initial_reg_without_pani,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If initail REGISTER doen't bring P-Access-Network-Info header<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]<BR>[Test Step] IMS registration<BR>[Expected Result] check if if IREGISTER doesn't bring P-Access-Network-Info header in 1st unprotected REGISTER,Pass,,,,
+1905,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",initial_reg_without_pani,ua_config.initial_reg_without_pani,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]<BR>[Test Step] IMS registration<BR>[Expected Result] check if if IREGISTER doesn't bring P-Access-Network-Info header in 1st unprotected REGISTER,Pass,,,,
1906,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",initial_reg_without_pani.initial_reg_without_pani,ua_config.initial_reg_without_pani.initial_reg_without_pani,Not Support,no,no,no,no,[MCF]If initail REGISTER doen't bring P-Access-Network-Info headerbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
1907,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",iot_mode,ua_config.iot_mode,Not Support,no,yes,no,no,This parameter is used to infrom REG if it is under IOT mode.<BR>0:false<BR>1:true<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:false<BR>1:true,,,Not Support,IMS,IMS,,,Not Support,Untested,,,,
-1908,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipsec_fail_allowed,ua_config.ipsec_fail_allowed,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE tries to send REGISTER over unprototected channel when it failed to establish IPSec tunnel<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE registered, VoLTE OFF<BR>[Test Step] Enable VoLTE, but network does allow connection to provided IPSEC port.<BR>[Expected Result] <BR>When enabled: UE send REGISTER without IPSEC data.<BR>When disabled: IMS registration fail due to IPSEC failure.",Pass,,,,
+1908,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipsec_fail_allowed,ua_config.ipsec_fail_allowed,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE registered, VoLTE OFF<BR>[Test Step] Enable VoLTE, but network does allow connection to provided IPSEC port.<BR>[Expected Result] <BR>When enabled: UE send REGISTER without IPSEC data.<BR>When disabled: IMS registration fail due to IPSEC failure.",Pass,,,,
1909,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipsec_fail_allowed.ipsec_fail_allowed,ua_config.ipsec_fail_allowed.ipsec_fail_allowed,Not Support,no,no,no,no,[MCF]If UE tries to send REGISTER over unprototected channel when it failed to establish IPSec tunnelbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
-1910,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipsec_local_port_range,ua_config.ipsec_local_port_range,OTA and OTA BY OP,no,no,no,no,The range of ipsec client/server port<BR>,UNSIGNED INT,4,,,50,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check port_c&port_s in sip msg register's Security-Client is between 50000 and 50050,Pass,,,,
-1911,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipsec_local_port_start,ua_config.ipsec_local_port_start,OTA and OTA BY OP,no,no,no,no,Indicate the lower bound of IPSec port used in Security-Client header<BR>,UNSIGNED INT,4,,,50000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check port_c&port_s in sip msg register's Security-Client is between 50000 and 50050,Pass,,,,
-1912,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipv6_zero_compression,ua_config.ipv6_zero_compression,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if IPv6 is compressed form in REGISTER<BR>,UNSIGNED CHAR,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if IPv6 address in REGISTER Contact header is compressed form<BR>that its AKAv1 , when UA_reg_http_digest changed to 2 <BR>algorithm in Register Contact header is changed to AKAv2",Untested,,,,
+1910,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipsec_local_port_range,ua_config.ipsec_local_port_range,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,50,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check port_c&port_s in sip msg register's Security-Client is between 50000 and 50050,Pass,,,,
+1911,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipsec_local_port_start,ua_config.ipsec_local_port_start,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,50000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check port_c&port_s in sip msg register's Security-Client is between 50000 and 50050,Pass,,,,
+1912,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ipv6_zero_compression,ua_config.ipv6_zero_compression,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] <BR>[Test Step] IMS registration<BR>[Expected Result] check if IPv6 address in REGISTER Contact header is compressed form<BR>that its AKAv1 , when UA_reg_http_digest changed to 2 <BR>algorithm in Register Contact header is changed to AKAv2",Untested,,,,
1913,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",join_send_bye,ua_config.join_send_bye,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>In an conference invitation scenario, the UE send BYE request after conference participant is joined the conference call according to test case 15.19 of 3GPP TS 24.147. The UE is able to configure to send BYE or not. The UE will wait the BYE request from the operator network when this configuration is set to 0.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] IMS registered<BR>[Test Step] <BR>1. set 0 or 1 as NW expected setting<BR>2. do IMS registration again (IMS off/ on) <BR>3. make 3way conference call<BR>[Expected Result] 3way conferece call established successfully",Pass,,,,
1914,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",join_send_bye.join_send_bye,ua_config.join_send_bye.join_send_bye,Not Support,no,no,no,no,"[MCF]In an conference invitation scenario, the UE send BYE request after conference participant is joined the conference call according to test case 15.19 of 3GPP TS 24.147. The UE is able to configure to send BYE or not. The UE will wait the BYE request from the operator network when this configuration is set to 0.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1915,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",keep_alive_mode,ua_config.keep_alive_mode,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate which type of keep alive is used for IMS<BR>0:Send UDP keep alive during INVITE transaction is alive<BR>1:Send UDP keep alive when PCSCF is connected<BR>2:Send UDP keep alive when MO call is on-going<BR>3:Send TCP keep alive during INVITE transaction is alive<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Send UDP keep alive during INVITE transaction is alive<BR>1:Send UDP keep alive when PCSCF is connected<BR>2:Send UDP keep alive when MO call is on<BR>3:Send TCP keep alive during INVITE transaction is alive,,,1575,IMS,IMS,,,SMS transmission and receiption succeeds.,Pass,,,,
+1915,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",keep_alive_mode,ua_config.keep_alive_mode,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Send UDP keep alive during INVITE transaction is alive<BR>1:Send UDP keep alive when PCSCF is connected<BR>2:Send UDP keep alive when MO call is on<BR>3:Send TCP keep alive during INVITE transaction is alive,,,1575,IMS,IMS,,,SMS transmission and receiption succeeds.,Pass,,,,
1916,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",keep_alive_mode.keep_alive_mode,ua_config.keep_alive_mode.keep_alive_mode,Not Support,no,no,no,no,[MCF]Indicate which type of keep alive is used for IMSbit 0:0:Send UDP keep alive during INVITE transaction is alivebit 1:1:Send UDP keep alive when PCSCF is connectedbit 2:2:Send UDP keep alive when MO call is on-goingbit 3:3:Send TCP keep alive during INVITE transaction is alive,BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1917,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",keep_original_refresher_in_reinvite,ua_config.keep_original_refresher_in_reinvite,OTA and OTA BY OP,no,no,no,no,Uses original refresher in re-INVITE. Prevents scenario where re-INVITE might change the original refresh<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,""[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO call. MO hold, MO retrieve, MT hold and MT retrieve<BR>[Expected Result] Call succesfull and hold and retrieve operations succesfull. If feature is enabled original refresher parameter(uac or uas) should be use through out the test scenario."",Pass,,,,
1918,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",keep_original_refresher_in_reinvite.keep_original_refresher_in_reinvite,ua_config.keep_original_refresher_in_reinvite.keep_original_refresher_in_reinvite,Not Support,no,no,no,no,[MCF]Keeps original refresher in reinvitebit 0:0:Disablebit 1:1:Enable,BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1919,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",last_known_cell_id,ua_config.last_known_cell_id,Not Support,no,yes,no,no,Runtime parameter. Do not change.<BR>To record last attach cell info. Should co-work with last_known_cell_timestamp.<BR>,STRING,64,64,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1920,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",last_known_cell_timestamp,ua_config.last_known_cell_timestamp,Not Support,no,yes,no,no,Runtime parameter. Do not change.<BR>To record last attach cell timestamp. Should co-work with last_known_cell_id.<BR>,STRING,32,32,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,,,,,,Untested,,,,
1921,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",last_known_rat_type,ua_config.last_known_rat_type,Not Support,no,yes,no,no,Runtime parameter. Do not change. 3GPP rat type information before last power off.<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-1922,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",local_port,ua_config.local_port,OTA and OTA BY OP,no,no,no,no,The unprotected port used for initial registration<BR>,UNSIGNED INT,4,,,5060,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check if uri port in Contact header of 1st sip REGISTER is changed<BR>===below is the example of Contact header=====<BR>REGISTER sip:ims.mnc001.mcc001.3gppnetwork.org SIP/2.0<BR>Via: SIP/2.0/TCP [2001:0:0:1:0:0:0:1];branch=z9hG4bK6xTwEGqCqe6bsV<BR>...<BR>Contact: <sip:[2001:0:0:1:0:0:0:1]:5060;transport=tcp>;,Pass,,,,
-1923,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",local_sip_protocol_type,ua_config.local_sip_protocol_type,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+1922,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",local_port,ua_config.local_port,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,5060,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check if uri port in Contact header of 1st sip REGISTER is changed<BR>===below is the example of Contact header=====<BR>REGISTER sip:ims.mnc001.mcc001.3gppnetwork.org SIP/2.0<BR>Via: SIP/2.0/TCP [2001:0:0:1:0:0:0:1];branch=z9hG4bK6xTwEGqCqe6bsV<BR>...<BR>Contact: <sip:[2001:0:0:1:0:0:0:1]:5060;transport=tcp>;,Pass,,,,
+1923,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",local_sip_protocol_type,ua_config.local_sip_protocol_type,Not Support,no,yes,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
1924,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",max_hold_unhold_retry_cnt,ua_config.max_hold_unhold_retry_cnt,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If we cannot perform Hold/unHold due to other ongoing procedures, we will retry after a 1 second timer. This parameter is to limit the maximum retry counts. When the upper limit is reached, UA will respond hold/unhold failure.<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Deprecated,Untested,,,,
1926,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",merge_send_bye,ua_config.merge_send_bye,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>In a three way conference scenario, the UE send SIP BYE request after conference participant is joined the conference call according to test case 15.19 of 3GPP TS 24.147. The UE is able to configure to send SIP BYE or not. The UE will wait the SIP BYE request from the operator network when this configuration is set to 0.<BR>0: Expect NW send BYE<BR>1: UE send BYE<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Expect NW send BYE<BR>1:UE send BYE,,,,IMS,IMS,,,""[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make two MO Call and then merge call<BR>[Expected Result] If the network is waiting UE to terminate the call after call is merged successfully and this configuration is set to 1, UE will terminate the call by sending SIP BYE request"",Pass,,,,
1927,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",merge_send_bye.merge_send_bye,ua_config.merge_send_bye.merge_send_bye,Not Support,no,no,no,no,"[MCF]In a 3 way conference scenario, the UE send BYE request after conference participant is joined the conference call according to test case 15.19 of 3GPP TS 24.147. The UE is able to configure to send BYE or not. The UE will wait the BYE request from the operator network when this configuration is set to 0.bit 0:0:UE send BYEbit 1:1:Expect NW send BYE",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -1936,13 +1936,13 @@
1950,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",no_state_transition_when_183_withoutsdp.no_state_transition_when_183_withoutsdp,ua_config.no_state_transition_when_183_withoutsdp.no_state_transition_when_183_withoutsdp,Not Support,no,no,no,no,[MCF]Ignore 183 which not contain SDP message.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1951,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_add_SDP_in_OPTIONS,ua_config.not_add_SDP_in_OPTIONS,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From IETF RFC3261 section 11.2 Processing of OPTIONS Request, the IMSS SHOULD include a body in the response to discribe media capabilities. But some operator networks do not request the message body, because the SIP OPTIONS is for Piggyback the UE. The UE will not apply the rule in IETF RFC3261 when this configuraiton is set to 1.<BR>0:Add SDP in OPTIONS<BR>1:NOT add SDP in OPTIONS<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Add SDP in OPTIONS<BR>1:NOT add SDP in OPTIONS,,,,IMS,IMS,,,""[INIT]<BR>Under Nanjing CMCC Volte Network.<BR>[Test Step]<BR>1. make a volte mo call.<BR>2. when volte call active, receive a SIP OPTION from network.<BR>3. Observe whether receive BYE(call drop) after DUT retrun 200 OK.<BR>[Expected Result]<BR>The DUT will receive OPTION after volte call active.<BR>When DUT return 200 OK with SDP, this led to call drop.<BR>Enable this PARA. DUT will not take SDP in 200 OK, and call drop will not happen."",Pass,,,,
1952,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_add_SDP_in_OPTIONS.not_add_SDP_in_OPTIONS,ua_config.not_add_SDP_in_OPTIONS.not_add_SDP_in_OPTIONS,Not Support,no,no,no,no,"[MCF]From RFC3261 section 11.2 Processing of OPTIONS Request, the UAS SHOULD include a body in the response to discribe media capabilities. But some operator networks do not request the message body, because the OPTIONS is for Piggyback the UE. The UE will not apply the rule in RFC3261 when this configuraiton is set to 1.bit 0:0:Add SDP in OPTIONSbit 1:1:NOT add SDP in OPTIONS",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1953,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg,ua_config.not_auto_reg,OTA and OTA BY OP,no,no,no,no,Not auto triggering IMS registration while receiving the SIP error cause (defined by bitmask)<BR>b0: 500 registration failure response<BR>b1: 503 registration failure response<BR>b2-b31: reserved<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b0:500 registration failure response<BR>b1:503 registration failure response,,,,IMS,IMS,,,"[Init] LTE register on 4G, VoLTE OFF<BR>[Test Step] Enabled VoLTE and send 500 SIP response to register.<BR>[Expected Result]<BR> Enable: UE does not trigger new IMS registration automatically. For example VoLTE off/on is needed.<BR> Disable: UE does IMS registration again after configred auto reg timer.",Untested,,,,
+1953,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg,ua_config.not_auto_reg,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b0:500 registration failure response<BR>b1:503 registration failure response,,,,IMS,IMS,,,"[Init] LTE register on 4G, VoLTE OFF<BR>[Test Step] Enabled VoLTE and send 500 SIP response to register.<BR>[Expected Result]<BR> Enable: UE does not trigger new IMS registration automatically. For example VoLTE off/on is needed.<BR> Disable: UE does IMS registration again after configred auto reg timer.",Untested,,,,
1954,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg.b1,ua_config.not_auto_reg.b1,Not Support,no,no,no,no,[MCF]Not auto triggering IMS registration while receiving the SIP error cause (defined by bitmask)500 registration failure response,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] LTE register on 4G, VoLTE OFF<BR>[Test Step] Enabled VoLTE and send 500 SIP response to register.<BR>[Expected Result]<BR> Enable: UE does not trigger new IMS registration automatically. For example VoLTE off/on is needed.<BR> Disable: UE does IMS registration again after configred auto reg timer.",Untested,,,,
1955,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg.b2,ua_config.not_auto_reg.b2,Not Support,no,no,no,no,[MCF]Not auto triggering IMS registration while receiving the SIP error cause (defined by bitmask)503 registration failure response,BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] LTE register on 4G, VoLTE OFF<BR>[Test Step] Enabled VoLTE and send 500 SIP response to register.<BR>[Expected Result]<BR> Enable: UE does not trigger new IMS registration automatically. For example VoLTE off/on is needed.<BR> Disable: UE does IMS registration again after configred auto reg timer.",Untested,,,,
1956,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg.b3,ua_config.not_auto_reg.b3,Not Support,no,no,no,no,[MCF]Not auto triggering IMS registration while receiving the SIP error cause (defined by bitmask)Reserved,BIT,30,,30,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"[Init] LTE register on 4G, VoLTE OFF<BR>[Test Step] Enabled VoLTE and send 500 SIP response to register.<BR>[Expected Result]<BR> Enable: UE does not trigger new IMS registration automatically. For example VoLTE off/on is needed.<BR> Disable: UE does IMS registration again after configred auto reg timer.",Untested,,,,
-1957,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg_403,ua_config.not_auto_reg_403,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE stops registration retry (until power cycled or enter/leave filght mode) when NW replies 403 response for REGISTER<BR>0:Disable<BR>1:Enable for all<BR>2:Enable for VPLMN only<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable for all<BR>2:Enable for VPLMN only,,,,IMS,IMS,,,prerequiste: simulate NW to reply 403 to REGISTER<BR>steps: IMS registration<BR>=> check if IMS stop registration attempt,Pass,,,,
+1957,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg_403,ua_config.not_auto_reg_403,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE stops registration retry (until power cycled or enter/leave filght mode) when NW replies 403 response for REGISTER<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable for all<BR>2:Enable for VPLMN only,,,,IMS,IMS,,,prerequiste: simulate NW to reply 403 to REGISTER<BR>steps: IMS registration<BR>=> check if IMS stop registration attempt,Pass,,,,
1958,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",not_auto_reg_403.not_auto_reg_403,ua_config.not_auto_reg_403.not_auto_reg_403,Not Support,no,no,no,no,[MCF]If UE stops registration retry (until power cycled or enter/leave filght mode) when NW replies 403 response for REGISTERbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1959,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",notify_sms_notify_done,ua_config.notify_sms_notify_done,OTA and OTA BY OP,no,no,no,no,Indicate if SMS retry will be postponed until NOTIFY flow is done<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[init] ims register <BR>[Test Step] while registering send sms <BR>[Expected Result] check if the value enabled , then SMS retry will be postponed until NOTIFY flow is done",Pass,,,,
+1959,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",notify_sms_notify_done,ua_config.notify_sms_notify_done,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[init] ims register <BR>[Test Step] while registering send sms <BR>[Expected Result] check if the value enabled , then SMS retry will be postponed until NOTIFY flow is done",Pass,,,,
1960,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",notify_sms_notify_done.notify_sms_notify_done,ua_config.notify_sms_notify_done.notify_sms_notify_done,Not Support,no,no,no,no,[MCF]Indicate if SMS retry will be postponed until NOTIFY flow is donebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1961,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",nsn_specific,ua_config.nsn_specific,Not Support,no,yes,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>NSN network request the UE to set 100rel in Supported header field and +g.3gpp.smsip in Accept-Contact Header and P-Preferred-Identity in the SIP MESSAGE Request. The request is added while SMS sending if this configuraiton is enabled.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE. <BR>[Test Step] make a MO SMS<BR>[Expected Result] If configuration is set to 1, the UE will set 100rel in Supported header field and +g.3gpp.smsip in Accept-Contact Header and P-Preferred-Identity in the SIP MESSAGE Request.",Untested,,,,
1962,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oir_privacy_to_header,ua_config.oir_privacy_to_header,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From 3GPP TS 24.607, the UE supports OIR (originator Identification Restriction) temporary mode activation by adding Privacy header field. But the specification says the UE can use 'header' or 'id' in the header field. The UE will use 'header' when this configuration is set to 1; and use 'id' when this configuration is set to 0.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi.<BR>[Test Step] Make a call with OIR (originator Identification Restriction) temporary mode<BR>[Expected Result] If the configuration is set to 1, "Privacy: header" will be added to SIP INVITE request. If the configuration is set to 0, "Privacy: id" will be added to SIP INVITE request",Pass,,,,
@@ -1950,7 +1950,7 @@
1964,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_err_rsp_for_prack,ua_config.omit_err_rsp_for_prack,Not Support,no,no,no,no,When enabled PRACK request error response is omitted and call continue normally as if the error response is not received<BR>In some cases enabling this can increase call drop rate<BR>0: PRACK error response is handled and lead to IMS call clearing<BR>1: PRACK error response is omitted<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:PRACK error response is handled and lead to IMS call clearing<BR>1:PRACK error response is omitted,,,,IMS,IMS,,,"[Init] IMS Register on 4G, and enable VoLTE. Test equipment must send 100rel in require header for VoLTE call.<BR>[Test Step]<BR>1. Make one VoLTE call.<BR>2. Make network simulator to send error response to PRACK<BR>[Expected Result] <BR>Setting value 0: Prack error response from network lead to call drop.<BR>Setting value 1: Prack error response is omitted and call creation continue normally."",Pass,,,,
1965,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_method_invite_in_refer_to,ua_config.omit_method_invite_in_refer_to,OTA and OTA BY OP,no,no,no,no,"Refer-To: header , whether to omit the ;method=INVITE paramter in Refer-To: header URI. The ;method=INVITE is optional. However, some networks might expect it. Enabling this will make the URI little bit shorter, and therefore might be preferred by some operators.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"Add a member to IMS conference call.<BR>If the flag is set the Refer-To header includes ;method=INVITE<BR>If the flag is not set the Refer-To heder does not indluce ;method=INVITE.<BR>Both are legal, but typically we add ;method=INVITE.",Pass,,,,
1966,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",omit_method_invite_in_refer_to.omit_method_invite_in_refer_to,ua_config.omit_method_invite_in_refer_to.omit_method_invite_in_refer_to,Not Support,no,no,no,no,"[MCF]Refer-To: header , whether to omit the ;method=INVITE paramter in Refer-To: header URI.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1967,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_end_reset_tcp_client,ua_config.oos_end_reset_tcp_client,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Reset TCP client ports after OOS end has been received and re-registration after OOS is enabled.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE, VoLTE enabled<BR>[Test Step] UE go to RF shielded box or simialr and MD go to OOS. Return back to service.<BR>[Expected Result] <BR>Enabled: TCP connection reset and reconnect is done for IMS client socket before IMS re-register is sent to network<BR>Disabled: re-register is sent without TCP connection reset.",Pass,,,,
+1967,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_end_reset_tcp_client,ua_config.oos_end_reset_tcp_client,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE, VoLTE enabled<BR>[Test Step] UE go to RF shielded box or simialr and MD go to OOS. Return back to service.<BR>[Expected Result] <BR>Enabled: TCP connection reset and reconnect is done for IMS client socket before IMS re-register is sent to network<BR>Disabled: re-register is sent without TCP connection reset.",Pass,,,,
1968,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",oos_end_reset_tcp_client.oos_end_reset_tcp_client,ua_config.oos_end_reset_tcp_client.oos_end_reset_tcp_client,Not Support,no,no,no,no,[MCF]Reset TCP client ports after OOS end has been received and re-registration after OOS is enabled.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1969,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",open_pcscf_retry_count_limit,ua_config.open_pcscf_retry_count_limit,OTA and OTA BY OP,no,no,no,no,0:disable<BR>1:enable<BR>Used to enable PCSCF retry festure about some IMS REG fail scenario(Not auto re reg and pcscf all fail).<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,prerequiste: simulate NW to reply error response(e.g 404) to REGISTER<BR>steps: IMS registration<BR>=> check if UE attempt to retry IMS registration,Pass,,,,
1970,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",open_pcscf_retry_count_limit.open_pcscf_retry_count_limit,ua_config.open_pcscf_retry_count_limit.open_pcscf_retry_count_limit,Not Support,no,no,no,no,[MCF]Used to enable PCSCF retry festure about some IMS REG fail scenario(Not auto re reg and pcscf all fail).bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
@@ -1961,14 +1961,14 @@
1975,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pad1,ua_config.pad1,Not Support,no,no,no,no,,UNSIGNED SHORT,2,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1976,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_error_when663,ua_config.pcscf_error_when663,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>when SIP Timer B of IETF RFC 3261 expiries for a call, some operator networks request the UE to report PCSCF server error.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step] do volte call<BR>[Expected Result] <BR> enable: if there is no response from NW during timerB, UE will report PCSCF error and turn to unregistered state<BR> disable: not report PCSCF error",Pass,,,,
1977,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_error_when663.pcscf_error_when663,ua_config.pcscf_error_when663.pcscf_error_when663,Not Support,no,no,no,no,"[MCF]when Timer B expiries for a call, some operator networks request the UE to report PCSCF error.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1978,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_port_number,ua_config.pcscf_port_number,OTA and OTA BY OP,no,no,no,no,PCSCF port number<BR>,UNSIGNED INT,4,,,5060,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535<BR>0~65535<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check wireshark if REGISTER destination port is 5060,Pass,,,,
+1978,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pcscf_port_number,ua_config.pcscf_port_number,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,5060,NR15.R3.MD700.IVT.MP1MR3.MP,,0~65535<BR>0~65535<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check wireshark if REGISTER destination port is 5060,Pass,,,,
1979,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pem_use_sdp_rtp_drct,ua_config.pem_use_sdp_rtp_drct,OTA and OTA BY OP,no,no,no,no,This is to decide if the UE play early media when P-Early-Media:sendrecv and SDP attribute includes "a=sendrecv".<BR>0:Disable<BR>1:Enable<BR>unit: boolean<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE. The network has support early media playing<BR>[Test Step] make a MO call and then network send 18x response with P-Early-Media:sendrecv header field.<BR>[Expected Result] If configuration is set to 1, the UE will play early media only if 18x response also include a=sendrecv in SDP body. If configuration is set to 0, UE will play early media no matter SDP attribute.",Pass,,,,
1980,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pem_use_sdp_rtp_drct.pem_use_sdp_rtp_drct,ua_config.pem_use_sdp_rtp_drct.pem_use_sdp_rtp_drct,Not Support,no,no,no,no,[MCF]play early media when P-Early-Media:sendrecv and a=sendrecv.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1981,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pend_dereg_in_initial_reg,ua_config.pend_dereg_in_initial_reg,OTA and OTA BY OP,no,no,no,no,when_stop_b_timer<BR>Pend de-reg while initial registration is on going<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"prerequiste: simulate NW not to reply REGISTER<BR>steps: IMS registration, enter flight mode<BR>=> check if UE sends de-REGISTER during initial registration",Pass,,,,
+1981,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pend_dereg_in_initial_reg,ua_config.pend_dereg_in_initial_reg,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"prerequiste: simulate NW not to reply REGISTER<BR>steps: IMS registration, enter flight mode<BR>=> check if UE sends de-REGISTER during initial registration",Pass,,,,
1982,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pend_dereg_in_initial_reg.pend_dereg_ind_initial_reg,ua_config.pend_dereg_in_initial_reg.pend_dereg_ind_initial_reg,Not Support,no,no,no,no,[MCF]Pend de-reg while initial registration is on goingbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1983,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pending_sip_msg_in_oos_state,ua_config.pending_sip_msg_in_oos_state,OTA and OTA BY OP,no,no,no,no,"In OOS state, UE pending the SIP messages until OOS end to send.<BR>1: Is the default value, and indicate UE pending the SIP messages until OOS end to send;<BR>0: UE still send SIP messages in OOS state;<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,"1:Is the default value, and indicate UE pending the SIP messages until OOS end to send<BR>0:UE still send SIP messages in OOS state",,,,IMS,IMS,,,""[Init] IMS Register on 4G, and enable VoLTE<BR>[Test Step]<BR>1. Make one volte call;<BR>2. Put DUT phone in Shielding box, after 3min, move out<BR>3. Check the remote phone and DUT phone;<BR>[Expected Result] <BR> enable: The remote phone call should be auto end also after the DUT phone removed out from sheilding box.<BR> disable: The remote phone call still continues while DUT phone call auto ends in step 3."",Pass,,,,
1984,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pending_sip_msg_in_oos_state.pending_sip_msg_in_oos_state,ua_config.pending_sip_msg_in_oos_state.pending_sip_msg_in_oos_state,Not Support,no,no,no,no,"[MCF]In OOS state, UE pending the SIP messages until OOS end to send.bit 1:1:Is the default value, and indicate UE pending the SIP messages until OOS end to send;bit 0:0:UE still send SIP messages in OOS state;",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1985,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pidf_country,ua_config.pidf_country,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Add country information in geolocation in REGISTER.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init] UE in LTE, VoLTE disabled<BR>[Test Step] Enabled VoLTE and observer REGISTER message XML document.<BR>[Expected Result] <BR>Enabled: PIDF XML document in contain country code in ISO 3166 format<BR>Disabled: Country code is not included in PIDF XML document.",Pass,,,,
+1985,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pidf_country,ua_config.pidf_country,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init] UE in LTE, VoLTE disabled<BR>[Test Step] Enabled VoLTE and observer REGISTER message XML document.<BR>[Expected Result] <BR>Enabled: PIDF XML document in contain country code in ISO 3166 format<BR>Disabled: Country code is not included in PIDF XML document.",Pass,,,,
1986,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pidf_country.pidf_country,ua_config.pidf_country.pidf_country,Not Support,no,no,no,no,[MCF]Add country information in geolocation in REGISTER.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1987,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",pqos_timer_timeout,ua_config.pqos_timer_timeout,OTA and OTA BY OP,no,no,no,no,"For audio call with video early media scenario, replace tqos to pqos (a shorter value) to protect the bandwidth reservation time during audio/video upgrade procedure. <BR>unit: ms<BR>",UNSIGNED SHORT,2,,,2000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,""[Init] IMS Register on 4G<BR>[Test Step] Make an audio call (remote has enabled video ringback tone service)<BR>[Expected Result]<BR> Enable (value > 0): when making a audio call and NW has iniatated an upgrade for later video ringback tone, the video bandwidth reservation timer will be replaced by this parameter (i.e. Pqos) rather then Tqos.<BR> Disable (value = 0): when making a audio call and NW has iniatated an upgrade for later video ringback tone, the video bandwidth reservation timer will still be Tqos."",Pass,,,,
1988,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",prefer_original_codec,ua_config.prefer_original_codec,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>For some operators, UE will need to select original codec acquired from last SDP negotiation to avoid possible call drop issues. If this flag is enabled, when handling SDP offer, UE will select the 1st PT that matching the original codec (which will possibly not be the actual 1st PT in SDP Offer).<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register on 4G<BR>[Test Step] Run FT Cases<BR>[Expected Result]<BR> Enable: Select the original selected audio codec even it's not the highest priority in the incoming Offer,Pass,,,,
@@ -1979,29 +1979,29 @@
1993,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",query_other_sim_call_state.query_other_sim_call_state,ua_config.query_other_sim_call_state.query_other_sim_call_state,Not Support,no,no,no,no,[MCF]Query the other sim's call state when perform ims reregister. AN: For DSDS Dual VoLTE enhancement.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1994,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",random_init_ipsec_port,ua_config.random_init_ipsec_port,OTA and OTA BY OP,no,no,no,no,"If this flag is set to TRUE, UE will use random port_c in register to avoid NW port_c conflict<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,no,IMS,IMS,,,"enable volte, reboot ue and find port_c in MD log(IMS_STACK)<BR>=> check if UE use random port",Pass,,,,
1995,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",random_init_ipsec_port.random_init_ipsec_port,ua_config.random_init_ipsec_port.random_init_ipsec_port,Not Support,no,no,no,no,"[MCF]If this flag is set to TRUE, UE will use random port_c in register to avoid NW port_c conflictbit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-1996,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rcs_feature,ua_config.rcs_feature,OTA and OTA BY OP,no,no,no,no,RCS feature setting. <BR>,STRING,12,12,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,internal used,Untested,,,,
+1996,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rcs_feature,ua_config.rcs_feature,OTA and OTA BY OP,no,no,no,no,,STRING,12,12,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,internal used,Untested,,,,
1997,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",re_calc_rr_rs_in_offer_answer,ua_config.re_calc_rr_rs_in_offer_answer,OTA and OTA BY OP,no,no,no,no,"Before the MO call was answered, The UE detects that the network allocation of GBR is smaller than the SIP negotiation bandwidth, MO UE modify smaller AS value and re-negotiates smaller codec through UPDATE message. if this value is 1, RR/RS value will be always re-calculated based on AS value.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]<BR>IMS Register on 4G<BR>[Test Step]<BR>1. A make an audio call to B<BR>2. SIP SDP negotiation bitrate is bigger than dedicated bearer GBR value.<BR>3. A consider current assigned GBR and re-negotiation suitable codec through Update message.<BR>[Expected Result]<BR>Case Pass, in test step 3, UE can use update with suitable codec bit-rate.",Pass,,,,
1998,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",re_calc_rr_rs_in_offer_answer.re_calc_rr_rs_in_offer_answer,ua_config.re_calc_rr_rs_in_offer_answer.re_calc_rr_rs_in_offer_answer,Not Support,no,no,no,no,"[MCF]Before the MO call was answered, The UE detects that the network allocation of GBR is smaller than the SIP negotiation bandwidth, MO UE modify smaller AS value and re-negotiates smaller codec through UPDATE message. if this value is 1, RR/RS value will be always re-calculated based on AS value.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
1999,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",refer_delay_timer,ua_config.refer_delay_timer,OTA and OTA BY OP,no,no,no,no,"Customization of delay first REFER message after conference mergeing ACK message. <BR>recommand to set as 0,range 0~1000<BR>unit: ms<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"Test in machine (Y/N) <BR>Test Time (minutes) <BR>[Init] IMS registered<BR>[Test Step] <BR>1. set timer value as NW expected setting<BR>2. do IMS registration again (IMS off/ on) <BR>3. make 3way conference call<BR>[Expected Result] 3way conferece call established successfully (SIP REFER will delay to send as setted value)",Pass,,,,
2000,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",refer_dialog_to_server,ua_config.refer_dialog_to_server,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>When inviting other users to a conference according to section 5.3.1.5.3 of 3GPP TS 24.147, the UE set the request URI of the REFER request to the address of the user who is invited to the conference. The UE must send the REFER method by using the existing dialog (in-dialog), but some operators request to create new dialog. The UE send the REFER with the existing dialog from conference creation when this configuration is set to 1.<BR>0:out-of-dialog<BR>1:in-dialog<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:out<BR>1:in,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] After making call to the conference focus server, UA will send SIP REFER request to invite the two participants to join the call. The SIP REFER request is using the dialog to server if the configuration is set to 1",Pass,,,,
2001,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",refer_dialog_to_server.refer_dialog_to_server,ua_config.refer_dialog_to_server.refer_dialog_to_server,Not Support,no,no,no,no,"[MCF]When inviting other users to a conference according to section 5.3.1.5.3 of 3GPP TS 24.147, the UE set the request URI of the REFER request to the address of the user who is invited to the conference. The UE must send the REFER method by using the existing dialog (in-dialog), but some operators request to create new dialog. The UE send the REFER with the existing dialog from conference creation when this configuration is set to 1.bit 0:0:out-of-dialogbit 1:1:in-dialog",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2002,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_add_content_disposition,ua_config.reg_add_content_disposition,Not Support,no,no,no,no,Adds Content-Dispostion header when pidf document is added to REGISTER request<BR>0: Does not use Content-Disposition header<BR>1: Adds Content-Dispostion header when pidf document is added to REGISTER request<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Does not use Content<BR>1:Adds Content,,,no dependency,IMS,IMS,,,[Init] VoLTE or VoWiFi enabled SIM<BR>[Test Step] IMS registration<BR>[Expected Result] If enabled Content-Disposition header is used when pidf document is added to REGISTER request,Untested,,,,
-2003,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_after_nw_dereg_60s,ua_config.reg_after_nw_dereg_60s,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate how long IMS should wait for to trigger new registration after NW-init de-registration. <BR>unit: sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] ims register<BR>[Test steps] nw initiate a de-reg by NOTIFY<BR>[Expected Result] if enabled UE will wait for the interval before new Reg .<BR>If the value is 60 sec , UE will wait 60 sec",Pass,,,,
+2003,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_after_nw_dereg_60s,ua_config.reg_after_nw_dereg_60s,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] ims register<BR>[Test steps] nw initiate a de-reg by NOTIFY<BR>[Expected Result] if enabled UE will wait for the interval before new Reg .<BR>If the value is 60 sec , UE will wait 60 sec",Pass,,,,
2004,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_check_reason_header,ua_config.reg_check_reason_header,OTA and OTA BY OP,no,no,no,no,"When enabled, UE checks the reason header in SIP registration failure response.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Registration failure<BR>[Test Step] IMS registration fails with 403 and Reason header is provided<BR>[Expected Result] When enabled UE checks Reason header and determines if new registration attempt is allowed at current location<BR>",Pass,,,,
2005,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_check_reason_header.reg_check_reason_header,ua_config.reg_check_reason_header.reg_check_reason_header,Not Support,no,no,no,no,"[MCF]When enabled, UE checks the reason header in SIP registration failure response.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2006,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_disable_pidf,ua_config.reg_disable_pidf,Not Support,no,no,no,no,"Bit mask whether to add pidf/location in different REGISTER messages. Bit 0 means enabled, bit 1 disabled.<BR>Location information is considered sensitive information, so this configuration is subject to local legistlation. Specifications: TS 24.229 clause 5.1.6 and RFC 4119<BR>b0: WFC emergency (default 0)<BR>b1: WFC normal (default 0)<BR>b2: VoLTE emergency (default 1)<BR>b3: VoLTE normal (default 1)<BR>b4-b7: reserved<BR>",UNSIGNED CHAR,1,,,0x0C,NR15.R3.MD700.IVT.MP1MR3.MP,,b2:VoLTE emergency (default 1)<BR>b3:VoLTE normal (default 1)<BR>b0:WFC emergency (default 0)<BR>b1:WFC normal (default 0),,,,IMS,IMS,,,[Init] 4G/WiFi attached and VoLTE/WFC disabled. <BR>[Test Step]<BR>1. Enable VoLTE<BR>2. Enable vowifi<BR>3. Make emergency call over VoLTE<BR>4. Make emergency call over WFC<BR>[Expected Result] <BR> Setting value disabled(1): UE does not add PIDF document in REGISTER<BR>Setting value enabled(0): UE add PIDF document in REGISTER",Untested,,,,
2007,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_expire_time_backup,ua_config.reg_expire_time_backup,Not Support,no,no,no,no,"If there is no Expire header or expire parameter in Contact header (200 OK) for REGISTER, UE will use the configured time as registration expire time. <BR>unit: sec<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,This configuration is abandoned.,Untested,,,,
-2008,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_fail_not_need_remove_binding,ua_config.reg_fail_not_need_remove_binding,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if IMS should send de-REGISTER when registration got error response<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,[Init] NW replies 486 to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check if IMS sends de-REGISTER after REGISTER got error response,Untested,,,,
+2008,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_fail_not_need_remove_binding,ua_config.reg_fail_not_need_remove_binding,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,[Init] NW replies 486 to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check if IMS sends de-REGISTER after REGISTER got error response,Untested,,,,
2009,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_fail_not_need_remove_binding.reg_fail_not_need_remove_binding,ua_config.reg_fail_not_need_remove_binding.reg_fail_not_need_remove_binding,Not Support,no,no,no,no,[MCF]Indicate if IMS should send de-REGISTER when registration got error responsebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2010,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_gruu_support,ua_config.reg_gruu_support,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if Supported header contains gruu<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] ims register and make call<BR>[Test steps] enable and check the supported header<BR>[Expected Result] if enabled UE will add gruu in supported header,Pass,,,,
+2010,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_gruu_support,ua_config.reg_gruu_support,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] ims register and make call<BR>[Test steps] enable and check the supported header<BR>[Expected Result] if enabled UE will add gruu in supported header,Pass,,,,
2011,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_gruu_support.reg_gruu_support,ua_config.reg_gruu_support.reg_gruu_support,Not Support,no,no,no,no,[MCF]Indicate if Supported header contains gruubit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2012,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_over_tcp,ua_config.reg_over_tcp,OTA and OTA BY OP,no,no,no,no,Force UE to send SIP REGISTER by TCP. This configuration overwrites the effect of use_udp_on_tcp_fail.<BR>0:default UE behavior<BR>1:Force to use TCP connection<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:default UE behavior<BR>1:Force to use TCP connection,,,,IMS,IMS,,,"(1) Use non-IPSEC operator SIM. e,g, APTG, Verizon<BR>(2) set reg_over_tcp to 1, and check whether init REGISTER over TCP",Pass,,,,
+2012,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_over_tcp,ua_config.reg_over_tcp,OTA and OTA BY OP,no,no,no,no,Force UE to send SIP REGISTER by TCP<BR>0:default UE behavior<BR>1:Force to use TCP connection<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:default UE behavior<BR>1:Force to use TCP connection,,,,IMS,IMS,,,"(1) Use non-IPSEC operator SIM. e,g, APTG, Verizon<BR>(2) set reg_over_tcp to 1, and check whether init REGISTER over TCP",Pass,,,,
2013,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_over_tcp.reg_over_tcp,ua_config.reg_over_tcp.reg_over_tcp,Not Support,no,no,no,no,[MCF]Force UE to send SIP REGISTER by TCPbit 0:0:default UE behaviorbit 1:1:Force to use TCP connection,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2014,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_restore_try_next_pcscf,ua_config.reg_restore_try_next_pcscf,OTA and OTA BY OP,no,no,no,no,This parameter is related to "timer_b_restore_reg". It is used to defined which pcscf server will be tried.<BR>0:try the same PCSCF<BR>1:try next PCSCF<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:try the same PCSCF<BR>1:try next PCSCF,,,,IMS,IMS,,,"[Init] IMS register on 4G or WiFi<BR>[Test Step] MO call<BR>[Expected Result]<BR>If the SIP INVITE cannot be sent out because SIP Timer B expires or fatal error, UA will try the next PCSCF address if the parameter is set to 1",Pass,,,,
2015,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_restore_try_next_pcscf.reg_restore_try_next_pcscf,ua_config.reg_restore_try_next_pcscf.reg_restore_try_next_pcscf,Not Support,no,no,no,no,[MCF]This parameter is related to timer_b_restore_reg. It is used to defined which pcscf server will be tried.bit 0:0:try the same PCSCFbit 1:1:try next PCSCF,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,,Untested,,,,
-2016,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_route_hdr,ua_config.reg_route_hdr,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER should bring Route header<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi; <BR>2.start IMS registration in LTE or VoWIFI;<BR>[Expected Result] <BR>REGISTER should bring Route header.<BR>",Pass,,,,
+2016,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_route_hdr,ua_config.reg_route_hdr,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi; <BR>2.start IMS registration in LTE or VoWIFI;<BR>[Expected Result] <BR>REGISTER should bring Route header.<BR>",Pass,,,,
2017,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_route_hdr.reg_route_hdr,ua_config.reg_route_hdr.reg_route_hdr,Not Support,no,no,no,no,[MCF]Indicate if REGISTER should bring Route headerbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2018,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_try_all_pcscf_5626,ua_config.reg_try_all_pcscf_5626,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Try RFC5626 retry mechanism only if all pcscf are failed<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] NW provides 2 PCSCF during PDN establishment, NW replies 404 to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check if 3rd REGISTER is sent after rfc5626 timer expires (refer to auto_re_reg_base_timer & auto_re_reg_max_timer)",Untested,,,,
+2018,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_try_all_pcscf_5626,ua_config.reg_try_all_pcscf_5626,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] NW provides 2 PCSCF during PDN establishment, NW replies 404 to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check if 3rd REGISTER is sent after rfc5626 timer expires (refer to auto_re_reg_base_timer & auto_re_reg_max_timer)",Untested,,,,
2019,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_try_all_pcscf_5626.reg_try_all_pcscf_5626,ua_config.reg_try_all_pcscf_5626.reg_try_all_pcscf_5626,Not Support,no,no,no,no,[MCF]Try RFC5626 retry mechanism only if all pcscf are failedbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2020,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_when_norsp_before_timeout,ua_config.reg_when_norsp_before_timeout,OTA and OTA BY OP,no,no,no,no,Initial Registration If TCALL timer exprires before any provisional response To INVITE<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO fails without any provisional response<BR>[Expected Result] When feature is enabled new initial registration is initiated after TCALL timer expires<BR>",Pass,,,,
2021,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reg_when_norsp_before_timeout.reg_when_norsp_before_timeout,ua_config.reg_when_norsp_before_timeout.reg_when_norsp_before_timeout,Not Support,no,no,no,no,[MCF]Initial registration if TCALL expire before any provisional response to INVITEbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -2009,9 +2009,9 @@
2023,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",regard_180_without_pem_as_inactive.regard_180_without_pem_as_inactive,ua_config.regard_180_without_pem_as_inactive.regard_180_without_pem_as_inactive,Not Support,no,no,no,no,[MCF]UE regards PEM as inactive when UE receives 180 without PEM.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2024,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reged_with_notification,ua_config.reged_with_notification,OTA and OTA BY OP,no,no,no,no,broadcast IMS registration status until receive valid NOTIFY from NW<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,(1) set reged_with_notification to '1'<BR>(2) check UE show VoLTE icon only when network send SIP NOTIFY to UE in IMS registration procedure,Pass,,,,
2025,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reged_with_notification.reged_with_notification,ua_config.reged_with_notification.reged_with_notification,Not Support,no,no,no,no,[MCF]broadcast IMS registration status until receive valid NOTIFY from NWbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2026,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",register_cap_whenever,ua_config.register_cap_whenever,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Usually VoLTE capabilities are not added when the UE is in WCDMA and GSM network as they are not supported VoLTE fuction. But some operators request to keep the IMS Registration no matter what RAT the UE initially attaches to. Even if the UE is using CS(UTRAN or GERAN) or CSFB (E-UTRAN not supporting voice-over-PS) for voice, the IMS registration shall include all UE supported services including MMTel. The UE send REGISTER request with mmtel capabilities when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,prerequiste: choose the operator whose NW can support IMS over 3G<BR>steps: IMS registration over 3G<BR>=> check if REGISTER Contact header has "mmtel" feature tag,Untested,,,,
+2026,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",register_cap_whenever,ua_config.register_cap_whenever,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,prerequiste: choose the operator whose NW can support IMS over 3G<BR>steps: IMS registration over 3G<BR>=> check if REGISTER Contact header has "mmtel" feature tag,Untested,,,,
2027,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",register_cap_whenever.register_cap_whenever,ua_config.register_cap_whenever.register_cap_whenever,Not Support,no,no,no,no,"[MCF]Usually VoLTE capabilities are not added when the UE is in WCDMA and GSM network as they are not supported VoLTE fuction. But some operators request to keep the IMS Registration no matter what RAT the UE initially attaches to. Even if the UE is using CS(UTRAN or GERAN) or CSFB (E-UTRAN not supporting voice-over-PS) for voice, the IMS registration shall include all UE supported services including MMTel. The UE send REGISTER request with mmtel capabilities when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2028,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",register_expiry,ua_config.register_expiry,OTA and OTA BY OP,no,no,no,no,Default value of expires in REGISTER/SUBSCRIBE Expires header<BR>,UNSIGNED INT,4,,,600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check Expires in sip msg register is 600000,Pass,,,,
+2028,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",register_expiry,ua_config.register_expiry,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,600000,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE<BR>[Test Step] register volte<BR>[Expected Result] check Expires in sip msg register is 600000,Pass,,,,
2029,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_1w_if_1A1H,ua_config.reject_1w_if_1A1H,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Some operator networks request the UE to reject incoming call when IMS has an active call and a hold call in hand. MTK default design is to report the incoming call to user and user can decide which call shall be rejected. The UE reject the incoming call anyway when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make a MO call and then hold call. The MT call is coming<BR>[Expected Result] The UE reject the incoming call anyway when this configuration is set to 1.,Pass,,,,
2030,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_1w_if_1A1H.reject_1w_if_1A1H,ua_config.reject_1w_if_1A1H.reject_1w_if_1A1H,Not Support,no,no,no,no,[MCF]Some operator networks request the UE to reject incoming call when IMS has an active call and a hold call in hand. MTK default design is to report the incoming call to user and user can decide which call shall be rejected. The UE reject the incoming call anyway when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2031,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_code_in23G,ua_config.reject_code_in23G,OTA and OTA BY OP,no,no,no,no,"When RAT change to 2/3G, what we should response for MT call? Refer to SIP cause in 3GPP TS 24.229 Table A.6., We will response error response, For general, we will response 503 Service Unavailable.<BR>SIP failure response code from 4xx~6xx.<BR>unit: integer<BR>",UNSIGNED INT,4,,,503,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi. <BR>[Test Step] moving to 2/3G network while making an incoming call<BR>[Expected Result] UA will reject the call with a required response code that set in this configuration,Pass,,,,
@@ -2021,7 +2021,7 @@
2035,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_mtcall_by_vops.reject_mtcall_by_vops,ua_config.reject_mtcall_by_vops.reject_mtcall_by_vops,Not Support,no,no,no,no,[MCF]Some operator networks request the UE to reject all incoming calls when VoPS is 0. The UE will apply the rule when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2036,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_mtcall_when_vilte,ua_config.reject_mtcall_when_vilte,Not Support,no,yes,no,no, Deprecated<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
2037,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_no_answer_resp_code,ua_config.reject_no_answer_resp_code,OTA and OTA BY OP,no,no,no,no,"SIP response code used to indicate to network that the user did not answer to an MT call. Specification: RFC 3261 chapter 13.3.1.3<BR>The range is all SIP error response codes 300-699, but all of those are not good for SIP protocol. <BR>",UNSIGNED SHORT,2,,,486,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init]IMS REGISTER on 4G <BR>[Test step] Make VoLTE MT call<BR>User does not answer the call, after timeout check the final response <BR>[Expected result]<BR>486: final response for INVITE is 486<BR>other_value: finals response for INVITE is "other_value"",Pass,,,,
-2038,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_rcs_request,ua_config.reject_rcs_request,OTA and OTA BY OP,no,no,no,no,Indicate in which scenario IMS will reject incoming RCS request.<BR>0:Always accept<BR>1:Reply error response defined in this feild when RCS client is disable<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Always accept<BR>1:Reply error response defined in this feild when RCS client is disable,,,,IMS,IMS,,,"[Init] disable RCS feature, set reject_rcs_request = 503<BR>[Test Step] IMS registration, MT call from RCS client<BR>[Expected Result] IMS will repy 503 to MT",Pass,,,,
+2038,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_rcs_request,ua_config.reject_rcs_request,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Always accept<BR>1:Reply error response defined in this feild when RCS client is disable,,,,IMS,IMS,,,"[Init] disable RCS feature, set reject_rcs_request = 503<BR>[Test Step] IMS registration, MT call from RCS client<BR>[Expected Result] IMS will repy 503 to MT",Pass,,,,
2039,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_rcs_request.reject_rcs_request,ua_config.reject_rcs_request.reject_rcs_request,Not Support,no,no,no,no,[MCF]Indicate in which scenario IMS will reject incoming RCS request.bit 0:0:Always acceptbit 1:1:Reply 503 when RCS client is disable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2040,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reject_text_when_text_off,ua_config.reject_text_when_text_off,OTA and OTA BY OP,no,no,no,no,"when GTT and RTT both off, GTT need to reject text (1: default) but RTT need to accept text (0).<BR>0: report text call when text capability off<BR>1: reject text call when text capability off<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:report text call when text capability off<BR>1:reject text call when text capability off,,,,IMS,IMS,,," Test in machine (Y/N) <BR> Test Time (minutes) <BR> [Init] IMS registered and NW support IMS GTT<BR> [Test Step] set tty_suuport disable and to make IMS GTT call to DUT<BR> [Expected Result] check MT GTT call be rejected",Pass,,,,
2041,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rel_conf_if_no_participant,ua_config.rel_conf_if_no_participant,Not Support,no,no,no,no,"From 3GPP TS 24.147, a conference call that only includes the conference host is allowed. But some operator networks request the UE to release the conference call when no other participants are present in the conference, which mean only the conference host in the conference call. The UE releases the conference call when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
@@ -2032,25 +2032,25 @@
2046,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",remove_aconf_when_reinvite_without_sdp.remove_aconf_when_reinvite_without_sdp,ua_config.remove_aconf_when_reinvite_without_sdp.remove_aconf_when_reinvite_without_sdp,Not Support,no,no,no,no,[MCF]Remove a=conf attribute from re-INVITE without SDP 200 OK SDP offer.bit 0:0:DO NOT removebit 1:1:Remove a=conf attribute,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2047,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",report_eimsreginfo_urc,ua_config.report_eimsreginfo_urc,Not Support,no,no,no,no,enabling this nvram config will enable IMS stack to report IMS Registration related info in URC to RILD<BR>0:disable<BR>1:enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable<BR>1:enable,,,,IMS,IMS,,,"Test in machine (Y/N) :N<BR> Test Time (minutes) :NA<BR> [Init] IMS Register over LTE or WiFi<BR> [Test Step] Customer can enable this nvram config to receive +ESIPREGINFO URC for IMS Registration related SIP information<BR> [Expected Result] afterenabling this nvram config to 1 , RIL to receive +ESIPREGINFO URC for IMS Registration related SIP information",Untested,,,,
2048,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",required_loc_info_num_set,ua_config.required_loc_info_num_set,OTA and OTA BY OP,no,no,no,no,"Pre defined set of phone numbers where location information must be used. <BR>For example: "112,15,17,18,115,119,191,196,197,116000,116117"<BR>",STRING,128,128,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO call to predefined number<BR>[Expected Result] Call succesfull and location data is available at INVITE request",Pass,,,,
-2049,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_23g4,ua_config.rereg_23g4,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if re-registration should be triggered when UE moves from 2/3G to 4G<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"phased out, so can't test",Pass,,,,
+2049,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_23g4,ua_config.rereg_23g4,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"phased out, so can't test",Pass,,,,
2050,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_23g4.rereg_23g4,ua_config.rereg_23g4.rereg_23g4,Not Support,no,no,no,no,[MCF]Indicate if re-registration should be triggered when UE moves from 2/3G to 4Gbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2051,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_in_oos_end,ua_config.rereg_in_oos_end,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE does re-registration while it leaves OOS and comes back to LTE<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] LTE signal only, no 2/3G, no wifi<BR>[Test Step] IMS registration, UE moves to an area without LTE signal for 10 seconds<BR>[Expected Result] check if if IMS sends re-REGISTER when UE moves back to the area with LTE signal",Pass,,,,
+2051,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_in_oos_end,ua_config.rereg_in_oos_end,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] LTE signal only, no 2/3G, no wifi<BR>[Test Step] IMS registration, UE moves to an area without LTE signal for 10 seconds<BR>[Expected Result] check if if IMS sends re-REGISTER when UE moves back to the area with LTE signal",Pass,,,,
2052,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_in_oos_end.rereg_in_oos_end,ua_config.rereg_in_oos_end.rereg_in_oos_end,Not Support,no,no,no,no,[MCF]If UE does re-registration while it leaves OOS and comes back to LTEbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2053,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_in_rat_change,ua_config.rereg_in_rat_change,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if re-registration should be triggered when UE moves from 4G to 2/3G.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] NW should support IMS over 3G<BR>[Test Step] IMS registration over LTE, UE moves to 3G<BR>[Expected Result] check if if IMS sends re-REGISTER when UE handover from 4G to 3G",Pass,,,,
+2053,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_in_rat_change,ua_config.rereg_in_rat_change,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] NW should support IMS over 3G<BR>[Test Step] IMS registration over LTE, UE moves to 3G<BR>[Expected Result] check if if IMS sends re-REGISTER when UE handover from 4G to 3G",Pass,,,,
2054,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rereg_in_rat_change.rereg_in_rat_change,ua_config.rereg_in_rat_change.rereg_in_rat_change,Not Support,no,no,no,no,[MCF]Indicate if re-registration should be triggered when UE moves from 4G to 2/3G.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2055,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resp_precondition_without_bw_cnf,ua_config.resp_precondition_without_bw_cnf,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>When MT UE receives UPDATE request for updating precondition status, UE will reply 200 OK for UPDATE indicate local precondition status to peer immediately without waiting the networks finished allocating dedicated bear if this flag is set to be enabled.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Reference CMCC NS-IOT 2.0 case 5.4.4<BR>[Init]<BR>CMCC NS-IOT 2.0 test package on simulater<BR>[Test Step]<BR>Execute case 5.4.4<BR>[Expect Result]<BR>1. Enable: case pass<BR>2. Disable: case failed,Pass,,,,
2056,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resp_precondition_without_bw_cnf.resp_precondition_without_bw_cnf,ua_config.resp_precondition_without_bw_cnf.resp_precondition_without_bw_cnf,Not Support,no,no,no,no,"[MCF]When MT UE receives UPDATE request for precondition, reply 200 OK to peer.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2057,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",restore_in_3gpp_abnormal,ua_config.restore_in_3gpp_abnormal,OTA and OTA BY OP,no,no,no,no,This is to enable 3GPP TS 24.229 5.1.2A.1.6 Abnormal cases for non-REGISTER method while making MO SMS and receiving the response.<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make MO call and then disable VOLTE or enter to flight mode.<BR>[Expected Result] If this configuration is set to 1, then the UE will send SIP BYE request for the MO call.",Pass,,,,
2058,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",restore_in_3gpp_abnormal.restore_in_3gpp_abnormal,ua_config.restore_in_3gpp_abnormal.restore_in_3gpp_abnormal,Not Support,no,no,no,no,[MCF]3GPP TS 24.229 5.1.2A.1.6 Abnormal cases for non-REGISTER methodbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2059,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resub_23g4,ua_config.resub_23g4,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if re-subscribe should be triggered when UE moves from 2/3G to 4G<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,ua_config.support_resub=1,IMS,IMS,,,"phased out, so can't test",Pass,,,,
+2059,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resub_23g4,ua_config.resub_23g4,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,ua_config.support_resub=1,IMS,IMS,,,"phased out, so can't test",Pass,,,,
2060,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",resub_23g4.resub_23g4,ua_config.resub_23g4.resub_23g4,Not Support,no,no,no,no,[MCF]Indicate if re-subscribe should be triggered when UE moves from 2/3G to 4Gbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2061,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_interval_after_403,ua_config.retry_interval_after_403,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate how long IMS should wait for to trigger new registration if current REGISTER received 403. <BR>unit: sec<BR>,INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to val(>0)<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi;<BR>2.start IMS registration in LTE or VoWIFI;<BR>3.received the 403 for registration from NW;<BR>[Expected Result] <BR>IMS should wait val sec for triggering new registration if current REGISTER received 403.,Pass,,,,
+2061,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",retry_interval_after_403,ua_config.retry_interval_after_403,OTA and OTA BY OP,no,no,no,no,,INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to val(>0)<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi;<BR>2.start IMS registration in LTE or VoWIFI;<BR>3.received the 403 for registration from NW;<BR>[Expected Result] <BR>IMS should wait val sec for triggering new registration if current REGISTER received 403.,Pass,,,,
2062,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",reuse_transport_methods,ua_config.reuse_transport_methods,OTA and OTA BY OP,no,no,no,no,"Bitmask containing a list of SIP requests which should use the same transport protocol as the request used to establish an (early) dialog, regarless of the size of the request.<BR>b1: INVITE<BR>b2: REFER<BR>b3: UPDATE<BR>b4: CANCEL<BR>b6: ACK<BR>b7: BYE<BR>b9: SUBSCRIBE<BR>b13: PRACK<BR>",UNSIGNED INT,4,,,0x00000050,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:INVITE<BR>b2:REFER<BR>b3:UPDATE<BR>b4:CANCEL<BR>b6:ACK<BR>b7:BYE<BR>b9:SUBSCRIBE<BR>b13:PRACK,,,,IMS,IMS,,,[Init] IMS register on 4G<BR>[Test Step] Set on an MO call.<BR>[Expected Result]<BR>Call setup succeeds.,Pass,,,,
2063,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ringing_state_oos_level,ua_config.ringing_state_oos_level,OTA and OTA BY OP,no,no,no,no,Release ringing state call immediately when receive Out-Of-Service signal from modem.<BR>0:No specific handling<BR>1:Release ringing state MO/MT call when enter OOS<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:No specific handling<BR>1:Release ringing state MO,,,,IMS,IMS,,,""[Init] IMS Register on 4G, and enable VoLTE<BR>[Test Step]<BR>1. Make one volte call;<BR>2. Put DUT phone in Shielding box, after 3min, move out<BR>3. Check the remote phone and DUT phone;<BR>[Expected Result] <BR> enable: The remote phone call should be auto end also after the DUT phone removed out from sheilding box.<BR> disable: The remote phone call still continues while DUT phone call auto ends in step 3."",Pass,,,,
2064,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ringing_state_oos_level.ringing_state_oos_level,ua_config.ringing_state_oos_level.ringing_state_oos_level,Not Support,no,no,no,no,[MCF]bit 0:0:No specific handlingbit 1:1:Release ringing state MO/MT call when enter OOS,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2065,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_prcd_when_video_prcd_off,ua_config.rm_prcd_when_video_prcd_off,OTA and OTA BY OP,no,no,no,no,"Remove the 'precondition' tag when doing upgrade, if NVRAM Setting 'video_action_precondition' is off<BR>0:When upgrade, reINVITE will have 'precondition' tag and qos only in m:audio<BR>1:When upgrade, reINVITE will not have 'precondition' tag and qos in m:audio and m:video<BR>It's valid only when 'video_action_precondition' is set to 0<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:When upgrade, reINVITE will have<BR>1:When upgrade, reINVITE will not have",,,,IMS,IMS,,,"[Init] IMS Register on 4G, "video_action_precondition" is disabled<BR>[Test Step]<BR>1) Make a audio call<BR>2) upgrade<BR>[Expected Result]<BR> Enable: UE will disable precondition tag and qos parameters when doing upgrade<BR> Disable: UE will have precondition tag in Header and qos parameters in m:audio",Pass,,,,
2066,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_prcd_when_video_prcd_off.rm_prcd_when_video_prcd_off,ua_config.rm_prcd_when_video_prcd_off.rm_prcd_when_video_prcd_off,Not Support,no,no,no,no,"[MCF]Remove the 'precondition' tag when doing upgrade, if NVRAM Setting 'video_action_precondition' is offbit 0:0:When upgrade, reINVITE will have 'precondition' tag and qos only in m:audiobit 1:1:When upgrade, reINVITE will not have 'precondition' tag and qos in m:audio and m:video",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2067,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtcp_interval,ua_config.rtcp_interval,OTA and OTA BY OP,no,no,no,no,"When IMS use AS value to calculate RTP/RTCP interval according to RFC3551 and 3556, the configuration is used to set the minimum value of RTP/RTCP interval<BR>0: disable RTCP<BR>other value: the minimum value of RTCP interval<BR>unit:ms<BR>",UNSIGNED INT,4,,,5000,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable RTCP,,,,IMS,IMS,,,"Test in machine: N<BR>Test Time: NA<BR>[Init] <BR> prepare sim supported IMS<BR>[Test Step]<BR> 1. set customized value of test sim(OPID/MCC/MNC) by MCF. ex: 3000 ms<BR> - do not set LTECSR NVRAM "ltecsr_common_para2"<BR> 2. reboot device without sim, start mtklog, then insert sim<BR> 3. make a VoLTE call longer than customized time<BR><BR>[Expected Result] <BR> Check if RTCP sending interval is larger than customized value. <BR> - checked by machine pcap or pcap generated by ELT -> External -> Extract IMS / VoLTE ...<BR> - or by MD log<BR> - ELT -> View -> PS Modules -> LTECSR (show LTECSR log)<BR> - search "[RTCP][VOICE][UL]" to get RTCP sending log to check.",Pass,,,,
+2067,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtcp_interval,ua_config.rtcp_interval,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,5000,NR15.R3.MD700.IVT.MP1MR3.MP,,0:disable RTCP,,,,IMS,IMS,,,"Test in machine: N<BR>Test Time: NA<BR>[Init] <BR> prepare sim supported IMS<BR>[Test Step]<BR> 1. set customized value of test sim(OPID/MCC/MNC) by MCF. ex: 3000 ms<BR> - do not set LTECSR NVRAM "ltecsr_common_para2"<BR> 2. reboot device without sim, start mtklog, then insert sim<BR> 3. make a VoLTE call longer than customized time<BR><BR>[Expected Result] <BR> Check if RTCP sending interval is larger than customized value. <BR> - checked by machine pcap or pcap generated by ELT -> External -> Extract IMS / VoLTE ...<BR> - or by MD log<BR> - ELT -> View -> PS Modules -> LTECSR (show LTECSR log)<BR> - search "[RTCP][VOICE][UL]" to get RTCP sending log to check.",Pass,,,,
2068,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtcp_mux_support,ua_config.rtcp_mux_support,OTA and OTA BY OP,no,no,no,no,"According to RFC5761, RTP data packets and RTP Control Protocol (RTCP) packets can be multiplexed on a single UDP port. This option is for control the UE if enable the rtcp multiplexing support or not.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,""[Init] IMS Register on 4G, and enable VoLTE<BR>[Test Step] Make a MO and MT VoLTE or ViLTE call<BR>[Expected Result] <BR> enable: The call established with audio or video media using the same port for RTP and RTCP, only if NW support RFC5761.<BR> disable: The audio or video media port for RTP and RTCP as before this feature."",Pass,,,,
2069,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtcp_mux_support.rtcp_mux_support,ua_config.rtcp_mux_support.rtcp_mux_support,Not Support,no,no,no,no,[MCF]RTCP port multiplexing support.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2070,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtcp_xr_dup_maxsize,ua_config.rtcp_xr_dup_maxsize,OTA and OTA BY OP,no,no,no,no,"For RFC3611 RTCP-XR feature, this item is used to configure Duplicate RLE Report Block in SDP attribute. This value indicates the largest size the whole report block SHOULD have in octets.<BR>recommand to set as 0<BR>",UNSIGNED SHORT,2,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,"2071, 2091",IMS,IMS,,," Test in machine (Y/N) <BR> Test Time (minutes) <BR> [Init] IMS registered and NW support RTCPXR<BR> [Test Step] set rtcp_xr_support enable and expected setting to make VoLTE call<BR> [Expected Result] check UE sending RTCPXR packect as expected format type",Pass,,,,
@@ -2080,7 +2080,7 @@
2094,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtp_rtcp_local_port_start,ua_config.rtp_rtcp_local_port_start,OTA and OTA BY OP,no,no,no,no,"This is to set RTP/RTCP port start point, different per operator<BR>40000~65534<BR>",UNSIGNED INT,4,,,40000,NR15.R3.MD700.IVT.MP1MR3.MP,,40000~65534<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,make volte call and check the SDP port number is in the range or not,Pass,,,,
2095,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtt_enable,ua_config.rtt_enable,OTA and OTA BY OP,no,no,no,no,RTT feature flag<BR>0:Disable IMS RTT capability<BR>1:Enable IMS RTT capability with automatic RTT operation mode<BR>2:Enable IMS RTT capability with upon request RTT operation mode<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable IMS RTT capability<BR>1:Enable IMS RTT capability with automatic RTT operation mode<BR>2:Enable IMS RTT capability with upon request RTT operation mode,,,,IMS,IMS,,,Internal Use,Untested,,,,
2096,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtt_enable.rtt_enable,ua_config.rtt_enable.rtt_enable,Not Support,no,no,no,no,[MCF]RTT feature flagbit 0:0:Disable IMS RTT capabilitybit 1:1:Enable IMS RTT capability with automatic RTT operation modebit 2:2:Enable IMS RTT capability with upon request RTT operation mode,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2097,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtt_tag_mode,ua_config.rtt_tag_mode,OTA and OTA BY OP,no,no,no,no,Indicate in which scenario REGISTER will bring text feature tag<BR>0:Follow UI<BR>1:Whenever<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Follow UI<BR>1:Whenever,,,,IMS,IMS,,,"[Init] IMS register on 4G ,used for US operators only<BR>[Test Step] Set to 1 and check Register contact header<BR>[Expected Result]Reg contact header should bring text feature tag if rtt_tag_mode is enabled",Pass,,,,
+2097,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtt_tag_mode,ua_config.rtt_tag_mode,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Follow UI<BR>1:Whenever,,,,IMS,IMS,,,"[Init] IMS register on 4G ,used for US operators only<BR>[Test Step] Set to 1 and check Register contact header<BR>[Expected Result]Reg contact header should bring text feature tag if rtt_tag_mode is enabled",Pass,,,,
2098,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rtt_tag_mode.rtt_tag_mode,ua_config.rtt_tag_mode.rtt_tag_mode,Not Support,no,no,no,no,[MCF]Indicate in which scenario REGISTER will bring text feature tagbit 0:0:Follow UIbit 1:1:Whenever,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2099,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",scb_ntf_cs_protection,ua_config.scb_ntf_cs_protection,Not Support,no,yes,no,no,This parameter is used to indicate if there need to use CS to protect subscribe and notify of register under IOT mode.<BR>0:false<BR>1:ture<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:false<BR>1:ture,,,Not Support,IMS,IMS,,,Not Support,Untested,,,,
2100,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",send_183_when_prcd_none,ua_config.send_183_when_prcd_none,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From IETF RFC3261, the UE will send SIP 180 ringing when the precondition framework is diabled ("UA_Call_Precondition"). But some operator networks request the UE to send SIP 183 with SDP even when incoming SIP INVITE request does not support precondition framework. The UE will send SIP 183 with SDP when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi. The network does not support precondition framework<BR>[Test Step] Make MO call<BR>[Expected Result] If this configuration is set to 1, IMS will send 183 session progress response while receiving SIP INVITE request without precondition framework. If this configuration is set to 0, IMS will send 180 ringing response while receiving SIP INVITE request without precondition framework.",Pass,,,,
@@ -2127,10 +2127,10 @@
2141,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",short_code_support.short_code_support,ua_config.short_code_support.short_code_support,Not Support,no,no,no,no,[MCF]Whether to check for short code from P-Asserted-Identity.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2142,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",show_octet_align,ua_config.show_octet_align,OTA and OTA BY OP,no,no,no,no,"From IETF RFC4867, it is a default value when SDP attribute octet_align is 0, and it can be not present.<BR>Dependnce on operator specific requirement, UE will present when this flag is 1.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO call<BR>[Expected Result] If the parameter is set to 1, octet-align will be revealed on SDP body of SIP INVITE request.",Pass,,,,
2143,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",show_octet_align.show_octet_align,ua_config.show_octet_align.show_octet_align,Not Support,no,no,no,no,[MCF]bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2144,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_compact_headers,ua_config.sip_compact_headers,OTA and OTA BY OP,no,no,no,no,"RFC3261, 7.3.3 Compact Form, whether compact-form header names are used or not<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi;<BR>2.start IMS registration in LTE or VoWIFI;<BR>3.make MO call;<BR>[Expected Result] <BR>The header names of all sip message are used compact form.,Pass,,,,
+2144,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_compact_headers,ua_config.sip_compact_headers,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi;<BR>2.start IMS registration in LTE or VoWIFI;<BR>3.make MO call;<BR>[Expected Result] <BR>The header names of all sip message are used compact form.,Pass,,,,
2145,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_compact_headers.sip_compact_headers,ua_config.sip_compact_headers.sip_compact_headers,Not Support,no,no,no,no,"[MCF]RFC3261, 7.3.3 Compact Form, whether compact-form header names are used or notbit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2146,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_dscp,ua_config.sip_dscp,OTA and OTA BY OP,no,yes,no,no,"The urgency of the request as perceived by the client (human or a UA), <BR>",UNSIGNED SHORT,2,,,26,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
-2147,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_priority,ua_config.sip_priority,Not Support,no,yes,no,no,To set the protocol-defined priority for all packets to be sent on this socket.<BR>Linux uses this value to order the networking queues: packets with a higher priority may be processed first depending on the selected device queueing discipline<BR>,UNSIGNED SHORT,2,,,7,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+2146,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_dscp,ua_config.sip_dscp,OTA and OTA BY OP,no,yes,no,no,,UNSIGNED SHORT,2,,,26,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>[Test Step]<BR>[Expected Result],Untested,,,,
+2147,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sip_priority,ua_config.sip_priority,Not Support,no,yes,no,no,,UNSIGNED SHORT,2,,,7,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
2148,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sit_tcp_2xx_rsp_retransmission,ua_config.sit_tcp_2xx_rsp_retransmission,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>SIP transaction help to retransmit TCP 2XX SIP respnse message in Server INVITE transaction<BR>0: only retransmit UDP response<BR>1: retransmit UDP response + TCP 2XX<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:only retransmit UDP response<BR>1:retransmit UDP response + TCP 2XX,,,,IMS,IMS,,,(1) set sit_tcp_2xx_rsp_retransmission to '1'<BR>(2) check UE whether re-transmission 200OK for MT call when MT device does not send SIP ACK,Pass,,,,
2149,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sit_tcp_2xx_rsp_retransmission.sit_tcp_2xx_rsp_retransmission,ua_config.sit_tcp_2xx_rsp_retransmission.sit_tcp_2xx_rsp_retransmission,Not Support,no,no,no,no,[MCF]SIP transaction help to retransmit TCP 2XX SIP respnse message in Server INVITE transactionbit 0:0:only retransmit UDP responsebit 1:1:retransmit UDP response + TCP 2XX,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2150,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sms_follow_nw_ims_vops_support,ua_config.sms_follow_nw_ims_vops_support,OTA and OTA BY OP,no,no,no,no,"When enabled, smsip tag is included in (re-) REGISTER requests only if UE is on cell with has VoPS support. Change in VoPS support status will also trigger a registration refresh. Similar to follow_nw_ims_vops_support Call flag.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS register on 4G in network which supports initial IMS registration or registration maintenance in 2/3G<BR>[Test Step] Handover to 2/3G. Send an MO SMS and receive an MT SMS.<BR>[Expected Result]<BR>SMS transmission and receiption succeeds",Pass,,,,
@@ -2151,9 +2151,9 @@
2165,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",start_ringback_t_only_by_180,ua_config.start_ringback_t_only_by_180,Not Support,no,no,no,no,Determine if the CALL_RINGBACK_END_TIMER is only triggered to start by 180<BR>0:no restriction for the condition of starting the timer used to control the ringing duration<BR>1:only 180 can trigger to start used to control the ringing duration<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:no restriction for the condition of starting the timer used to control the ringing duration<BR>1:only 180 can trigger to start used to control the ringing duration,,,NA,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step]<BR>1) Make an audio call<BR>2) NW Trigger to send early media before sending 180 ringing<BR>[Expected Result]<BR> Enable: UE will start ringback timer only after having received 180 Ringing<BR> Disable: UE will start ringback timer once having received the early media",Untested,,,,
2166,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",still_select_if_no_acceptable_pt,ua_config.still_select_if_no_acceptable_pt,OTA and OTA BY OP,no,no,no,no,"If no acceptable pt in the incoming offer, UE will still select the 1st pt<BR>0:Do not accept any un-acceptable pt<BR>1:Accept the 1st pt if all the pts are un-acceptable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Do not accept any un<BR>1:Accept the 1st pt if all the pts are un,,,,IMS,IMS,,,""[Init] IMS Register on 4G<BR>[Test Step]<BR>1) A Call B<BR>2) In the SDP Answer sent to A, there is no valid palyload type<BR>[Expected Result]<BR> Enable: UE will still select a codec that we can support with slightly modifying the paramters<BR> Disable: UE will reject the SDP Answer if no valid payload type "",Pass,,,,
2167,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",still_select_if_no_acceptable_pt.still_select_if_no_acceptable_pt,ua_config.still_select_if_no_acceptable_pt.still_select_if_no_acceptable_pt,Not Support,no,no,no,no,"[MCF]If no acceptable pt in the incoming offer, UE will still select the 1st ptbit 0:0:Do not accept any un-acceptable ptbit 1:1:Accept the 1st pt if all the pts are un-acceptable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2168,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stop_reg_md_lower_layer_err,ua_config.stop_reg_md_lower_layer_err,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if IMS will detect Modem lower layer error<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,(only work in specific operator)<BR>[Init] ims register<BR>[Test steps] make modem lower layer failure like RLC failure<BR>[Expected Result] if enabled IMS will receive indication for modem lower layer,Untested,,,,
+2168,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stop_reg_md_lower_layer_err,ua_config.stop_reg_md_lower_layer_err,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,(only work in specific operator)<BR>[Init] ims register<BR>[Test steps] make modem lower layer failure like RLC failure<BR>[Expected Result] if enabled IMS will receive indication for modem lower layer,Untested,,,,
2169,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",stop_reg_md_lower_layer_err.stop_reg_md_lower_layer_err,ua_config.stop_reg_md_lower_layer_err.stop_reg_md_lower_layer_err,Not Support,no,no,no,no,[MCF]Indicate if IMS will detect Modem lower layer errorbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2170,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sub_contact_with_sip_instance,ua_config.sub_contact_with_sip_instance,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if SUBSCRIBE contact header contains sip.instance<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] ims register for vzw<BR>[Test steps] enable and check the SUBSCRIBE contact header<BR>[Expected Result] if enabled UE will use sip instance id in SUB contact header,Pass,,,,
+2170,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sub_contact_with_sip_instance,ua_config.sub_contact_with_sip_instance,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] ims register for vzw<BR>[Test steps] enable and check the SUBSCRIBE contact header<BR>[Expected Result] if enabled UE will use sip instance id in SUB contact header,Pass,,,,
2171,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sub_contact_with_sip_instance.sub_contact_with_sip_instance,ua_config.sub_contact_with_sip_instance.sub_contact_with_sip_instance,Not Support,no,no,no,no,[MCF]Indicate if SUBSCRIBE contact header contains sip.instancebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2172,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",sub_def_expires,ua_config.sub_def_expires,OTA and OTA BY OP,no,no,no,no,Define expiration time which is used for IMS register event SUBSCRIBE expiry time. When set to value 0 SUBSCRIBE expiry time value is same alue which is used in REGISTER expiry time value.<BR>0-600000<BR>unit: sec<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] UE is in 4G with VoLTE disabled<BR>[Test Step]<BR>1. Enable VoLTE<BR>[Expected Result] <BR> enable: UE use in IMS register operation related SUBSCRIBE message the configured value.<BR> disable: UE use in IMS register operation related SUBSCRIBE message same value as in REGISTER message.",Pass,,,,
2173,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",subscribe_dialog_to_server,ua_config.subscribe_dialog_to_server,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Same to 'refer_dialog_to_server'. IMS set the Request-URI of the SIP SUBSCRIBE request to the address of the user who is invited to the conference. The IMS must send the SIP SUBSCRIBE request by using the existing dialog (in-dialog), but some operators request to create new dialog. The IMS send the SIP SUBSCRIBE request with the existing dialog from conference creation when this configuration is set to 1.<BR>0:out-of-dialog<BR>1:in-dialog<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:out<BR>1:in,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] After the two calls are merged, UA will send SIP SUBSCRIBE request to the conference focus server to get conference menu. The SIP SUBSCRIBE request is using the dialog to server if the configuration is set to 1. The SIP SUBSCRIBE request will create new dialog if the configuration is set to 0",Pass,,,,
@@ -2162,17 +2162,17 @@
2176,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_combine_retry_algo.support_combine_retry_algo,ua_config.support_combine_retry_algo.support_combine_retry_algo,Not Support,no,no,no,no,"[MCF]When network responds with 4xx error codes for SIP REGISTER sent from UE, UE shall retry on the 1st P-CSCF (based on PCO order) and shall NOT failover to the other P-CSCF. There is a back-off retry timer which follow RFC5626 to avoid exhausting IMS core network. When network responds with 5xx or 6xx error codes or no response for SIP REGISTER sent from UE, UE shall follow the PCO order to make IMS registration retry on different P-CSCF. UE shall retry 3 times on each of the P-CSCF before attempting on the next P-CSCF. The UE will failover from IPV6 P-CSCF to IPV4 P-CSCF. The UE shall come back and retry the 1st PCO priority P-CSCF after retry failed on the last PCO priority P-CSCF, and there is a back-off retry timer which follow RFC5626 to avoid exhausting IMS core network.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2177,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_early_upgrade,ua_config.support_early_upgrade,OTA and OTA BY OP,no,no,no,no,To support remote upgrade (via UPDATE) during MO call establishment (usually for video early media scenario).<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step] Make an audio call<BR>[Expected Result]<BR> Enable: UE is able to upgrade from audio to video during call establishment.<BR> Disable: UE is not able to upgrade from audio to video during call establishment.",Pass,,,,
2178,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_early_upgrade.support_early_upgrade,ua_config.support_early_upgrade.support_early_upgrade,Not Support,no,no,no,no,[MCF]To support remote upgrade (by UPDATE) during MO call establishment.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2180,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_resub,ua_config.support_resub,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>When enabled, UE performs resubscription after reg event subscription expires.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,ua_config.resub23g4 = 1,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1 & ua_config.resub_23g4 to 1<BR>NW should support IMS over 2g or 3g<BR>[Test Step]<BR>1.enable VoLTE ;<BR>2.IMS registration in 2g or 3g;<BR>3.move UE to 4g area and make rat change happen<BR>[Expected Result] <BR>UE will perform resubscription when rat changes from 2/3g to 4g,Pass,,,,
+2180,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_resub,ua_config.support_resub,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,ua_config.resub23g4 = 1,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1 & ua_config.resub_23g4 to 1<BR>NW should support IMS over 2g or 3g<BR>[Test Step]<BR>1.enable VoLTE ;<BR>2.IMS registration in 2g or 3g;<BR>3.move UE to 4g area and make rat change happen<BR>[Expected Result] <BR>UE will perform resubscription when rat changes from 2/3g to 4g,Pass,,,,
2181,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_resub.support_resub,ua_config.support_resub.support_resub,Not Support,no,no,no,no,"Only valid when ua_config.resub_23g4 = 1, then UE will perform resubscription when rat changes from 2/3G to 4G<BR>bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,ua_config.resub_23g4=1,IMS,IMS,,,,Untested,,,,
2182,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_ringing_downgrade,ua_config.support_ringing_downgrade,OTA and OTA BY OP,no,no,no,no,"In IMS field trial testing, users dial MO IMS video call, and NW may be downgrade to audio and then upgrade to video call before being answered. As we know, any change in the type of call from audio to video should be confirmed by the end user; If this flag is enabled, MD will automatically accept video call if the initial call type is video and call have not been answered.<BR>0:Disable<BR>1:Enable<BR>",ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init]<BR>IMS Register on 4G<BR>[Test Step]<BR>1. Dial Video call. <BR>2. NW send update to downgrade to audio<BR>3. MT answer as video, MO receive update to upgrade to video.<BR>[Expected Result]<BR>Call can answer as video.",Untested,,,,
2183,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_ringing_downgrade.support_ringing_downgrade,ua_config.support_ringing_downgrade.support_ringing_downgrade,Not Support,no,no,no,no,"[MCF]In IMS field trial testing, users dial MO IMS video call, and NW may be downgrade to audio and then upgrade to video call before being answered. As we know, any change in the type of call from audio to video should be confirmed by the end user; If this flag is enabled, MD will automatically accept video call if the initial call type is video and call have not been answered.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2184,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_sip_block,ua_config.support_sip_block,Not Support,no,yes,no,no," Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-2185,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_throttling_algo,ua_config.support_throttling_algo,Not Support,no,yes,no,no,"Retry mechanism based on pre-definded retry timer when registration failed.<BR>E.g., 1(30s), 2(30s), 3(60-75s), 1(120s), 2(480s), 3(900s)<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
-2186,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media,ua_config.support_video_early_media,OTA and OTA BY OP,no,no,no,no,"To enable the video early media feature (video ringback tone, video ringing tone)<BR>b1:video ringback tone (default 0)<BR>b2:video ringing tone (default 0)<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:video ringback tone (default 0)<BR>b2:video ringing tone (default 0),,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step] Make an audio or video call (remote has enabled video ringback tone service)<BR>[Expected Result]<BR> Enable: MO is able to play video ringback tone.<BR> Disable: MO is not able to play video ringback tone.",Pass,,,,
+2184,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_sip_block,ua_config.support_sip_block,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR> Operator specific, not allow customers to modify this configuration<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+2185,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_throttling_algo,ua_config.support_throttling_algo,Not Support,no,yes,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Retry mechanism based on pre-definded retry timer when registration failed.<BR>E.g., 1(30s), 2(30s), 3(60-75s), 1(120s), 2(480s), 3(900s)<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+2186,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media,ua_config.support_video_early_media,OTA and OTA BY OP,no,no,no,no,"If enable, UE will normally handle the scenario that NW send UPDATE with PEM:sendonly/sendrecv, and m:video a:sendonly/sendrecv. If disable, when above scenario happens, UE will configure video rtp direction as inactive, and also will set a:inactive in m:video of SDP answer.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,b1:video ringback tone (default 0)<BR>b2:video ringing tone (default 0),,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step] Make an audio or video call (remote has enabled video ringback tone service)<BR>[Expected Result]<BR> Enable: MO is able to play video ringback tone.<BR> Disable: MO is not able to play video ringback tone.",Pass,,,,
2187,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",support_video_early_media.support_video_early_media,ua_config.support_video_early_media.support_video_early_media,Not Support,no,no,no,no,"[MCF]If enable, UE will normally handle the scenario that NW send UPDATE with PEM:sendonly/sendrecv, and m:video a:sendonly/sendrecv. If disable, when above scenario happens, UE will configure video rtp direction as inactive.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2188,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tcp_connect_max_time_all,ua_config.tcp_connect_max_time_all,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>unit: sec<BR>,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] <BR>[Test Step] Let the DUT Register<BR>[Expected Result] <BR> enable: socket timeout is equal to value set<BR> disable: socket timeout is 10 seconds,Pass,,,,
-2189,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tcp_connect_max_time_invite,ua_config.tcp_connect_max_time_invite,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>MAX time to connect a TCP socket when sending INVITE request. <BR>unit: sec<BR>,UNSIGNED INT,4,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,SMS transmission and receiption succeeds.,Pass,,,,
-2190,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tdelay,ua_config.tdelay,OTA and OTA BY OP,no,no,no,no,Indicate how long IMS should wait for to trigger re-registration when UE moves from eHRPD to LTE. <BR>unit: sec<BR>,UNSIGNED INT,4,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[init] ims register over eHRPD like with sms only<BR>[test step] move UE from eHRPD to LTE and let UE re-register , only valid ofr hVolte case<BR>[Expected Results]check IMS should wait for to trigger re-registration when UE moves from eHRPD to LTE.",Pass,,,,
+2188,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tcp_connect_max_time_all,ua_config.tcp_connect_max_time_all,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] <BR>[Test Step] Let the DUT Register<BR>[Expected Result] <BR> enable: socket timeout is equal to value set<BR> disable: socket timeout is 10 seconds,Pass,,,,
+2189,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tcp_connect_max_time_invite,ua_config.tcp_connect_max_time_invite,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,10,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,SMS transmission and receiption succeeds.,Pass,,,,
+2190,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tdelay,ua_config.tdelay,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,5,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[init] ims register over eHRPD like with sms only<BR>[test step] move UE from eHRPD to LTE and let UE re-register , only valid ofr hVolte case<BR>[Expected Results]check IMS should wait for to trigger re-registration when UE moves from eHRPD to LTE.",Pass,,,,
2191,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",terminal_based_cw,ua_config.terminal_based_cw,OTA and OTA BY OP,no,no,no,no,From TS TS 24.615 Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem and from IR.92 the UE based CW shall be supported. So we add Alert-Info header field if another communication is existed. However the operator can choose to not to add this header field. The UE adds the header when this configuration is set to 1.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi. The network suppport terminal based call waiting<BR>[Test Step] Make MO call and then MT call is coming<BR>[Expected Result] If the configuration is set to 1, the Alert-Info header field with call-waiting tag will be added to 18x response.",Pass,,,,
2192,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",terminal_based_cw.terminal_based_cw,ua_config.terminal_based_cw.terminal_based_cw,Not Support,no,no,no,no,[MCF]From TS TS 24.615 Communication Waiting (CW) using IP Multimedia (IM) Core Network (CN) subsystem and from IR.92 the UE based CW shall be supported. So we add Alert-Info header field if another communication is existed. However the operator can choose to not to add this header field. The UE adds the header when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2193,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",text_feature_tag,ua_config.text_feature_tag,OTA and OTA BY OP,no,no,no,no,This parameter is used to control if carrying text feature tag or not in Contact header.<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Internal Use,Untested,,,,
@@ -2181,15 +2181,15 @@
2196,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",timer_b_restore_reg.timer_b_restore_reg,ua_config.timer_b_restore_reg.timer_b_restore_reg,Not Support,no,no,no,no,[MCF]A configuration that UE register to new P-CSCF address while timer B timeoutbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2197,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",transfer_conf_call_as_1to1,ua_config.transfer_conf_call_as_1to1,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>From TS 24.237 section 12.2.3, if the network does not support MSC Server assisted mid-call feature, the UE should replace the ongoing session with active speech media component which was made active most recently with the newly established CS voice call. This configuration will replace the conference call as a voice call no matter the feature tag checking in Contact header and Feature-Caps header field received during session establishment.<BR>0:Conference call follows mid-call parameter in SRVCC<BR>1:Conference call transfered as 1to1 call at SRVCC<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Conference call follows mid<BR>1:Conference call transfered as 1to1 call at SRVCC,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] Make a conference call and then SRVCC<BR>[Expected Result] If the network does not support MSC server assisted mid-call feature, the conference call will be treat as a voice/video call if the parameter is set to 1",Pass,,,,
2198,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",transfer_conf_call_as_1to1.transder_conf_call_as_1to1,ua_config.transfer_conf_call_as_1to1.transder_conf_call_as_1to1,Not Support,no,no,no,no,[MCF]bit 0:0:Conference call follows mid-call parameter in SRVCCbit 1:1:Conference call transfered as 1to1 call at SRVCC,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2199,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",treg,ua_config.treg,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate how long registration should be reset if there is no response. <BR>unit: sec<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,prerequiste: simulate NW not to reply to REGISTER<BR>steps: IMS registration<BR>=> check if UE trigger new ims registration after time Treg expires,Pass,,,,
-2200,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_n_next_pcscf_5626,ua_config.try_n_next_pcscf_5626,OTA and OTA BY OP,no,no,no,no,"Try RFC5626 registration retry mechanism only if encounter 2 pcscf failed continuously. E.g. 1(0s), 2(30s), 3(0s), 1(60s), 2(0s), 3(120s)<BR>",UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] Initial Response from Register is 403<BR>[Test Step] Let the DUT Register<BR>[Expected Result] <BR> enable: Register Retry will follow RFC5626 and exponentially backoff <BR> disable: regular Register Retry attempt will happen,Pass,,,,
-2201,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_next_pcscf,ua_config.try_next_pcscf,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if IMS tried to connect new PCSCF when registration to current PCSCF failed<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,internal used,Untested,,,,
+2199,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",treg,ua_config.treg,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,prerequiste: simulate NW not to reply to REGISTER<BR>steps: IMS registration<BR>=> check if UE trigger new ims registration after time Treg expires,Pass,,,,
+2200,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_n_next_pcscf_5626,ua_config.try_n_next_pcscf_5626,OTA and OTA BY OP,no,no,no,no,,UNSIGNED INT,4,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] Initial Response from Register is 403<BR>[Test Step] Let the DUT Register<BR>[Expected Result] <BR> enable: Register Retry will follow RFC5626 and exponentially backoff <BR> disable: regular Register Retry attempt will happen,Pass,,,,
+2201,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_next_pcscf,ua_config.try_next_pcscf,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,internal used,Untested,,,,
2202,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_next_pcscf.try_next_pcscf,ua_config.try_next_pcscf.try_next_pcscf,Not Support,no,no,no,no,[MCF]Indicate if IMS tried to connect new PCSCF when registration to current PCSCF failedbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2203,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_next_pcscf_5626,ua_config.try_next_pcscf_5626,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Try RFC5626 registration retry mechanism if registration failed. E.g. 1(30s), 2(60s), 3(120s), 1(240s), 2(480s), 3(960s)...etc<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,internal used,Untested,,,,
+2203,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_next_pcscf_5626,ua_config.try_next_pcscf_5626,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,internal used,Untested,,,,
2204,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_next_pcscf_5626.try_next_pcscf_5626,ua_config.try_next_pcscf_5626.try_next_pcscf_5626,Not Support,no,no,no,no,"[MCF]Try RFC5626 registration retry mechanism if registration failed. E.g. 1(30s), 2(60s), 3(120s), 1(240s), 2(480s), 3(960s)...etcbit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2205,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_same_pcscf_if_retry_after,ua_config.try_same_pcscf_if_retry_after,OTA and OTA BY OP,no,no,no,no,A switch to decide UE to connect the same PCSCF after retry-after timeout<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] NW replied 504 with Retry-After header to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check if IMS retry same PCSCF after timer indicated in Retry-After header expires,Pass,,,,
+2205,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_same_pcscf_if_retry_after,ua_config.try_same_pcscf_if_retry_after,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] NW replied 504 with Retry-After header to REGISTER<BR>[Test Step] IMS registration<BR>[Expected Result] check if IMS retry same PCSCF after timer indicated in Retry-After header expires,Pass,,,,
2206,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_same_pcscf_if_retry_after.try_same_pcscf_if_retry_after,ua_config.try_same_pcscf_if_retry_after.try_same_pcscf_if_retry_after,Not Support,no,no,no,no,[MCF]A switch to decide UE to connect the same PCSCF after retry-after timeoutbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2207,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_same_pcscf_rereg,ua_config.try_same_pcscf_rereg,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if next new registration tries same pcscf<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"prerequiste: simulate NW to reply 200 OK with small value in expires parameter of Contact header and reply error reponse only to re-REGISTER<BR>steps: IMS registration, wait re-registration triggered<BR>=> check if new registration use same P-CSCF as previous re-registration",Pass,,,,
+2207,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_same_pcscf_rereg,ua_config.try_same_pcscf_rereg,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"prerequiste: simulate NW to reply 200 OK with small value in expires parameter of Contact header and reply error reponse only to re-REGISTER<BR>steps: IMS registration, wait re-registration triggered<BR>=> check if new registration use same P-CSCF as previous re-registration",Pass,,,,
2208,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",try_same_pcscf_rereg.try_same_pcscf_rereg,ua_config.try_same_pcscf_rereg.try_same_pcscf_rereg,Not Support,no,no,no,no,[MCF]Indicate if next new registration tries same pcscfbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2209,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tty_cps,ua_config.tty_cps,OTA and OTA BY OP,no,no,no,no,"Text codec clock rate setting,the maximum number of characters that may be received per second as RFC4103<BR>recommand to set as 30<BR>",UNSIGNED CHAR,1,,,30,NR15.R3.MD700.IVT.MP1MR3.MP,,int:0~30,,,2210,IMS,IMS,,," Test in machine (Y/N) <BR> Test Time (minutes) <BR> [Init] IMS registered and NW support IMS TTY/RTT<BR> [Test Step] set tty_enbale and cps of T140 to make IMS TTY/RTT call<BR> [Expected Result] make IMS TTY/RTT call successfully",Pass,,,,
2210,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",tty_enable,ua_config.tty_enable,OTA and OTA BY OP,no,no,no,no,enable or disable RFC4103 T140 text media feature in SDP body<BR>0:Disable<BR>1:Enable<BR>,ENUM,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit 0/1,,,,IMS,IMS,,," Test in machine (Y/N) <BR> Test Time (minutes) <BR> [Init] IMS registered and NW support IMS TTY/RTT<BR> [Test Step] set enable to make IMS TTY/RTT call<BR> [Expected Result] make IMS TTY/RTT call successfully",Pass,,,,
@@ -2201,7 +2201,7 @@
2216,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",update_call_id_with_host.update_call_id_with_host,ua_config.update_call_id_with_host.update_call_id_with_host,Not Support,no,no,no,no,[MCF]Some operators request to add address in CallID header field. The UE will add it when this configuration is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2217,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",update_cap_when_rat_net_change,ua_config.update_cap_when_rat_net_change,OTA and OTA BY OP,no,no,no,no,Update IMS capability while RAT change<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"prerequiste: simulate NW to support LTE & C2K<BR>steps: IMS registration in LTE or C2K, then move UE to another RAT<BR>=> check if UE doesn't trigger IMS registration",Pass,,,,
2218,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",update_cap_when_rat_net_change.update_cap_when_rat_net_change,ua_config.update_cap_when_rat_net_change.update_cap_when_rat_net_change,Not Support,no,no,no,no,[MCF]Update IMS capability while RAT changebit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2219,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",update_ipsec_port_494,ua_config.update_ipsec_port_494,OTA and OTA BY OP,no,no,no,no,The handling mechanism while receiving 494 error response for REGISTER<BR>0:Trigger next registration with same IPSec client/server port as ones used in previous REGISTER<BR>1:Trigger next registration with different IPSec client/server port from ones used in previous REGISTER<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Trigger next registration with same IPSec client<BR>1:Trigger next registration with different IPSec client,,,,IMS,IMS,,,[Init] Initial Response from Register is 494<BR>[Test Step] Let the DUT Register<BR>[Expected Result] <BR> enable: Trigger next registration with different IPSec client/server port from ones used in previous REGISTER<BR> disable: Trigger next registration with same IPSec client/server port as ones used in previous REGISTER,Pass,,,,
+2219,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",update_ipsec_port_494,ua_config.update_ipsec_port_494,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Trigger next registration with same IPSec client<BR>1:Trigger next registration with different IPSec client,,,,IMS,IMS,,,[Init] Initial Response from Register is 494<BR>[Test Step] Let the DUT Register<BR>[Expected Result] <BR> enable: Trigger next registration with different IPSec client/server port from ones used in previous REGISTER<BR> disable: Trigger next registration with same IPSec client/server port as ones used in previous REGISTER,Pass,,,,
2220,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",update_ipsec_port_494.update_ipsec_port_494,ua_config.update_ipsec_port_494.update_ipsec_port_494,Not Support,no,no,no,no,[MCF]The handling mechanism while receiving 494 error response for REGISTERbit 0:0:Trigger next registration with same IPSec client/server port as ones used in previous REGISTERbit 1:1:Trigger next registration with different IPSec client/server port from ones used in previous REGISTER,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2221,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",upgrade_cancel_feature,ua_config.upgrade_cancel_feature,OTA and OTA BY OP,no,no,no,no,UE is able to cancel the ongoing local/remote ViLTE upgrade.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register on 4G<BR>[Test Step] <BR>1) Make an audio call (A Call B) <BR>2) A request to upgrade, while B do not accept<BR>3) A Cancel the Upgrade<BR>[Expected Result]<BR> Enable: IMS MD is able to cancel a call that is in upgrade procedure (AP UI should also support the "cancel" button).<BR> Disable: IMS MD is not able to cancel a call that is in upgrade procedure.",Pass,,,,
2222,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",upgrade_cancel_feature.upgrade_cancel_feature,ua_config.upgrade_cancel_feature.upgrade_cancel_feature,Not Support,no,no,no,no,[MCF]UE is able to cancel the ongoing ViLTE upgrade.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -2225,22 +2225,22 @@
2241,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_pau_at_sdp_origin.use_pau_at_sdp_origin,ua_config.use_pau_at_sdp_origin.use_pau_at_sdp_origin,Not Support,no,no,no,no,[MCF]Adds P-Associated URI to origin line as username (RFC4566)bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2242,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_pub_uid_in_ref_to,ua_config.use_pub_uid_in_ref_to,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>This is to set to use public user identity for Refer-To header field in SIP REFER request.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] IMS Register on 4G, and enable VoLTE<BR>[Test Step]<BR>1. Make volte conference call attempt;<BR>[Expected Result] <BR> enable: REFER message use public user identity from IMS register.<BR> disable: REFER message use home uri",Pass,,,,
2243,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_pub_uid_in_ref_to.use_pub_uid_in_ref_to,ua_config.use_pub_uid_in_ref_to.use_pub_uid_in_ref_to,Not Support,no,no,no,no,[MCF]Use public user identity for Refer-To header field in REFER request.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2244,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_specific_ipsec_algo,ua_config.use_specific_ipsec_algo,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Force UE to use specific IPSec algorithm to create IPSec channel during registration<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]<BR>[Test Step] IMS registration<BR>[Expected Result] check if if IREGISTER brings your expected encrytion/integrity algorithm in Security-Client header,Pass,,,,
+2244,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_specific_ipsec_algo,ua_config.use_specific_ipsec_algo,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]<BR>[Test Step] IMS registration<BR>[Expected Result] check if if IREGISTER brings your expected encrytion/integrity algorithm in Security-Client header,Pass,,,,
2245,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_specific_ipsec_algo.use_specific_ipsec_algo,ua_config.use_specific_ipsec_algo.use_specific_ipsec_algo,Not Support,no,no,no,no,[MCF]Force UE to use specific IPSec algorithm to create IPSec channel during registrationbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2246,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_udp_on_tcp_fail,ua_config.use_udp_on_tcp_fail,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE tries to re-send the sip messsage over UDP when UE failed to send message over TCP<BR>The effect of this configuration can be overwritten by reg_over_tcp.<BR>e.g. When the TCP connection of a SIP REGISTER is broken, and reg_over_tcp and use_udp_on_tcp_fail are both 1, the UE would not re-send the SIP REGISTER over UDP.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE registered, VoLTE OFF<BR>[Test Step] Enable VoLTE, but network does not not respond to TCP SYN<BR>[Expected Result] <BR>When enabled: UE try to use UDP for sending REGISTER if TCP sending failed.<BR>When disabled: UE does not fallback to use UDP if TCP connection creation fails.",Pass,,,,
+2246,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_udp_on_tcp_fail,ua_config.use_udp_on_tcp_fail,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>If UE tries to re-send the sip messsage over UDP when UE failed to send message over TCP<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,1,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,"[Init] UE in LTE registered, VoLTE OFF<BR>[Test Step] Enable VoLTE, but network does not not respond to TCP SYN<BR>[Expected Result] <BR>When enabled: UE try to use UDP for sending REGISTER if TCP sending failed.<BR>When disabled: UE does not fallback to use UDP if TCP connection creation fails.",Pass,,,,
2247,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",use_udp_on_tcp_fail.use_udp_on_tcp_fail,ua_config.use_udp_on_tcp_fail.use_udp_on_tcp_fail,Not Support,no,no,no,no,[MCF]If UE tries to re-send the sip messsage over UDP when UE failed to send message over TCPbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2248,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",user_agent,ua_config.user_agent,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Information about the UAC originating the request. It can use to reveal User information.<BR>,STRING,128,128,,"VoLTE/WFC UA",NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,[Init] IMS Register<BR>[Test Step] IMS Register<BR>[Expected Result] <BR>User-agent in SIP REGISTER is same as setting<BR>default: "VoLTE/WFC UA"<BR>example: "VoLTE/WFC UA MTK",Pass,,,,
-2249,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",via_uri_with_default_port,ua_config.via_uri_with_default_port,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Via header URI should show 5060 if IMS uses 5060 as default port<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi; <BR>2.start IMS registration in LTE or VoWIFI;<BR>[Expected Result] <BR>REGISTER Via header URI should show 5060 if IMS uses 5060 as default port.,Pass,,,,
+2249,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",via_uri_with_default_port,ua_config.via_uri_with_default_port,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi; <BR>2.start IMS registration in LTE or VoWIFI;<BR>[Expected Result] <BR>REGISTER Via header URI should show 5060 if IMS uses 5060 as default port.,Pass,,,,
2250,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",via_uri_with_default_port.via_uri_with_default_port,ua_config.via_uri_with_default_port.via_uri_with_default_port,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Via header URI should show 5060 if IMS uses 5060 as default portbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2251,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",via_without_rport,ua_config.via_without_rport,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER Via header contains rport parameter<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi; <BR>2.start IMS registration in LTE or VoWIFI;<BR>[Expected Result] <BR>UDP REGISTER or UDP SUBSCRIBE Via header should not contain rport parameter.,Pass,,,,
+2251,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",via_without_rport,ua_config.via_without_rport,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init]Insert SIM which suppot IMS and set the configuration to 1<BR>[Test Step]<BR>1.enable VoLTE or VoWiFi; <BR>2.start IMS registration in LTE or VoWIFI;<BR>[Expected Result] <BR>UDP REGISTER or UDP SUBSCRIBE Via header should not contain rport parameter.,Pass,,,,
2252,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",via_without_rport.via_without_rport,ua_config.via_without_rport.via_without_rport,Not Support,no,no,no,no,[MCF]Indicate if REGISTER Via header contains rport parameterbit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2253,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_action_precondition,ua_config.video_action_precondition,OTA and OTA BY OP,no,no,no,no,To support the precondition flow once performing local/remote ViLTE upgrade.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1:Enable<BR>0:Disable,,,,IMS,IMS,,,"[Init] Insert test USIM<BR>[Test Step] Run PCT Case 17.1 / 17.2<BR>[Expected Result]<BR> Enable: UE can support the upgrade procedure with precondition flow, and successfully run the TC 17.1 / 17.2<BR> Disable: UE cannot support the upgrade procedure with precondition flow, TC 17.1 / 17.2 will fail.",Pass,,,,
2254,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_action_precondition.video_action_precondition,ua_config.video_action_precondition.video_action_precondition,Not Support,no,no,no,no,[MCF]To support the precondition flow once performing local/remote ViLTE upgrade.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2255,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_conf_if_one_is_video,ua_config.video_conf_if_one_is_video,OTA and OTA BY OP,no,no,no,no,Some operators request to make video conference call when one of two calls is video call. Others request to make audio conference call directly. UE will make video conference call when this flag is set to 1.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] make one video call and then make voice call. Merge the two calls<BR>[Expected Result] The UE will create a video conference call if this configuration is set to 1,Pass,,,,
2256,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_conf_if_one_is_video.video_conf_if_one_is_video,ua_config.video_conf_if_one_is_video.video_conf_if_one_is_video,Not Support,no,no,no,no,[MCF]Some operators request to make video conference call when one of two calls is video call. Others request to make audio conference call directly. UE will make video conference call when this flag is set to 1.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2257,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_dscp,ua_config.video_dscp,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED SHORT,2,,,20,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+2257,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_dscp,ua_config.video_dscp,Not Support,no,yes,no,no,,UNSIGNED SHORT,2,,,20,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
2258,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_offer_rtp_profile,ua_config.video_offer_rtp_profile,OTA and OTA BY OP,no,no,no,no,Bitmask indicating which RTP profiles UE supports in video call SDP offer. Used to limit the profile list on SIP level if VT services supports some profiles the network doesn't.<BR>,UNSIGNED CHAR,1,,,0xFF,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS register on 4G<BR>[Test Step] Set up an MO VoLTE call<BR>[Expected Result]<BR>Call setup succeeds.",Pass,,,,
-2259,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_priority,ua_config.video_priority,Not Support,no,yes,no,no,Deprecated<BR>,UNSIGNED SHORT,2,,,4,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
+2259,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",video_priority,ua_config.video_priority,Not Support,no,yes,no,no,,UNSIGNED SHORT,2,,,4,NR15.R3.MD700.IVT.MP1MR3.MP,,any:values and format please reference to param. description,,,,IMS,IMS,,,,Untested,,,,
2260,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_cancel_in_srvcc_end,ua_config.wait_cancel_in_srvcc_end,Not Support,no,no,no,no,This is to send SIP CANCEL request after SRVCC success according to 3GPP TS 36.523 TC 13.4.3.16.<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,,Untested,,,,
2261,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_cancel_in_srvcc_end.wait_cancel_in_srvcc_end,ua_config.wait_cancel_in_srvcc_end.wait_cancel_in_srvcc_end,Not Support,no,no,no,no,"[MCF]From TS 36.523 TC 13.4.3.16, we shall response CANCEL after SRVCC.bit 0:0:Disablebit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2262,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wait_second_invite_for_hold,ua_config.wait_second_invite_for_hold,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>The network will send another INVITE without SDP after hold/unhold operation, the UE needs to wait the INVITE without SDP to complete the hold/unhold operation and send response to AP or the AP may send another unhold/hold operation to IMS.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,Deprecated,Untested,,,,
@@ -2253,11 +2253,11 @@
2269,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_emerg_pidf_country.wfc_emerg_pidf_country,ua_config.wfc_emerg_pidf_country.wfc_emerg_pidf_country,Not Support,no,no,no,no,[MCF]Add pidf civic country. More details in 3GPP TS 33.108 (and 33.106 and 33.107).bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
2270,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_emerg_pidf_lng_lat_country,ua_config.wfc_emerg_pidf_lng_lat_country,OTA and OTA BY OP,no,no,no,no,Add country/state/city infromation along with latitude and longitude<BR>0:Add longitude and latitude<BR>1:add country/state/city and longitude and latitude<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Add longitude and latitude<BR>1:add country,,,,IMS,IMS,,,""[Init] IMS Registered over VoWiFi<BR>[Test Step] Emergency call<BR>[Expected Result] When enabled; country, state and city information visible at location info"",Pass,,,,
2271,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_emerg_pidf_lng_lat_country.wfc_emerg_pidf_lng_lat_country,ua_config.wfc_emerg_pidf_lng_lat_country.wfc_emerg_pidf_lng_lat_country,Not Support,no,no,no,no,[MCF]Add country/state/city infromation along with latitude and longitudebit 0:0:Add longitude and latitudebit 1:1:add country/state/city and longitude and latitude,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2272,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_refresh_23g,ua_config.wfc_refresh_23g,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Trigger re-registration when wifi , 23G rat change happen.<BR>0:Disable<BR>1:Enable<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] NW should support IMS over 3G<BR>[Test Step] IMS registration over 3G and handover to wifi<BR>[Expected Result] check if IMS sends re-REGISTER over wifi,Pass,,,,
+2272,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_refresh_23g,ua_config.wfc_refresh_23g,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,[Init] NW should support IMS over 3G<BR>[Test Step] IMS registration over 3G and handover to wifi<BR>[Expected Result] check if IMS sends re-REGISTER over wifi,Pass,,,,
2273,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_refresh_23g.wfc_refresh_23g,ua_config.wfc_refresh_23g.wfc_refresh_23g,Not Support,no,no,no,no,[MCF]Trigger re-registration when wifi -> 23G rat change happen.bit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2274,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_with_plani,ua_config.wfc_with_plani,OTA and OTA BY OP,no,no,no,no,*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>Indicate if REGISTER takes P-Last-Access-Network-Info header when UE is in WiFi<BR>0:Disable<BR>1:Enable<BR>,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,(1) set wfc_with_plani to '1'<BR>(2) check whether SIP REGISTER bring P-LANI header in WFC registration,Pass,,,,
+2274,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_with_plani,ua_config.wfc_with_plani,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disable<BR>1:Enable,,,,IMS,IMS,,,(1) set wfc_with_plani to '1'<BR>(2) check whether SIP REGISTER bring P-LANI header in WFC registration,Pass,,,,
2275,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",wfc_with_plani.wfc_with_plani,ua_config.wfc_with_plani.wfc_with_plani,Not Support,no,no,no,no,[MCF]Indicate if REGISTER takes P-Last-Access-Network-Info header when UE is in WiFibit 0:0:Disablebit 1:1:Enable,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
-2276,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",when_stop_b_timer,ua_config.when_stop_b_timer,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>when_stop_b_timer is set to provisional response (100~199), and it indicates if INVITE transaction timeout timer(Time B) will stop when INVITE transaction receives provisional response not less than "when_stop_b_timer"<BR>0: 64*T1 timer (TS24.229 T1 timer)<BR>others: specify value<BR>unit: ms<BR>",UNSIGNED CHAR,1,,,100,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,"prerequiste: simulate NW only to reply 100 Trying to INVITE<BR>steps: IMS registration, MO call<BR>=> check if MO call can last(UI show dialing) at least 5 minutes without receiving 18x",Pass,,,,
+2276,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",when_stop_b_timer,ua_config.when_stop_b_timer,OTA and OTA BY OP,no,no,no,no,,UNSIGNED CHAR,1,,,100,NR15.R3.MD700.IVT.MP1MR3.MP,,0:64,,,,IMS,IMS,,,"prerequiste: simulate NW only to reply 100 Trying to INVITE<BR>steps: IMS registration, MO call<BR>=> check if MO call can last(UI show dialing) at least 5 minutes without receiving 18x",Pass,,,,
2277,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",when_stop_tcall,ua_config.when_stop_tcall,OTA and OTA BY OP,no,no,no,no,"*** The configuration setting is based on specific requirements or FT/IOT experience. It is not recommended to modify. ***<BR>For call protection, the IMS start a timer from INVITE to a provisioning response, the timer is set by "call_tcall_timer_timeout" and this configuration is to set the provisioning response. ex: 100 means the 100 trying response, 183 means the 183 session progress response. The value should be 1xx code and the default value is non-100 which is 101. If this timer timeouts without receive any provisional response, the UE will do CSFB for the call. <BR>SIP provisioning response code from 1xx<BR>",UNSIGNED CHAR,1,,,101,NR15.R3.MD700.IVT.MP1MR3.MP,,SIP provisioning response code from 1xx<BR>any:values and format please reference to param. description,,,,IMS,IMS,,,"[Init] IMS Register over LTE or VoWiFi<BR>[Test Step] MO 2 Calls and then merging the two calls<BR>[Expected Result] After making call to the conference focus server, UA will send SIP REFER request to invite the two participants to join the call and then the original calls need to temrinate. The SIP BYE request will be sent by UA if the configuration is set to 1",Pass,,,,
2278,2117,NVRAM_EF_IWLAN_N3CF_PROFILE_LID,"1,2",miafa,miafa,Not Support,no,no,no,no,Seems useless,UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,NVRAM,Driver,,,[Test Step]<BR>Not need test,Untested,,,,
2279,2117,NVRAM_EF_IWLAN_N3CF_PROFILE_LID,"1,2",IDi,n3cf_cfg.IDi,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>IDi: 8 "Specifies the format of the IDi that should be used in the IKEv2 authentication message(s)" <BR>0: "ID_RFC822_ADDR is the 3GPP standard IDi format.";<BR>1: "ID_RFC822_ADDR_MAC is the IDi and EAP Auth ID both using ID_RFC822_ADDR-based format with inclusion of the WiFi MAC";<BR>2: "ID_RFC822_ADDR_MAC_EAP_NO_MAC is the IDi using ID_RFC822_ADDR_MAC-based format, but EAP Auth ID using ID_RFC822_ADDR-based format.";<BR><BR><BR>",UNSIGNED CHAR,1,,,IDI_RFC822_ADDR,NR15.R3.MD700.IVT.MP1MR3.MP,,0:"ID_RFC822_ADDR is the 3GPP standard IDi format<BR>1:"ID_RFC822_ADDR_MAC is the IDi and EAP Auth ID both using ID_RFC822_ADDR<BR>2:"ID_RFC822_ADDR_MAC_EAP_NO_MAC is the IDi using ID_RFC822_ADDR_MAC,,,,WLAN offloading through ePDG for untrusted WiFi,ePDG,,,"[Init] <BR>Using WFC sim.<BR>Set this config to :<BR>1. 0<BR>2. 1<BR>3. 2<BR>[Test Step] <BR>Trigger WFC registration.<BR>[Expected Result]<BR>check ILM MSG_ID_N3EPC_N3SAM_IKE_SA_EST_REQ parameter : <BR>1. identities.idi, identities.eap shoud be the same and without WIFI MAC<BR>2. identities.idi, identities.eap shoud be the same and with WIFI MAC<BR>3. identities.idi, identities.eap shoud be the different and identities.idi is without WIFI MAC, identities.eap is with WIFI MAC",Pass,,,,
@@ -8605,7 +8605,7 @@
8700,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",ignore_mismatch_refer_notify.ignore_mismatch_refer_notify,ua_config.ignore_mismatch_refer_notify.ignore_mismatch_refer_notify,Not Support,no,no,no,no,"[MCF]<BR>check received Notify Message, only handle when event_id attribute equal to Refer CSeq.<BR>bit 0:0:Disable<BR>bit 1:1:Enable",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
8701,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",no_session_modify_retry_for_491,ua_config.no_session_modify_retry_for_491,OTA and OTA BY OP,no,no,no,no,"When downgrade or upgrade recv 491,do not retry<BR>0: Retry<BR>1: Not retry<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Retry<BR>1:Not retry,,,,IMS,IMS,,,"MO and MT click Upgrade or Downgrade at the same time many times, check if the call drop happened.",Pass,,,,
8702,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",no_session_modify_retry_for_491.no_session_modify_retry_for_491,ua_config.no_session_modify_retry_for_491.no_session_modify_retry_for_491,Not Support,no,no,no,no,[MCF]<BR>fix call drop issue<BR>bit 0:0:customized to 0,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
-8703,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_civic_on_e911,ua_config.rm_civic_on_e911,OTA and OTA BY OP,no,no,no,no,"According to RFC 5139, Civic location for PIDF-LO object could be added during E911 call, but some operators do not want to add location information during E911 call. If they do not want it, this configuration is set to 1.<BR>0: According to RFC5139, add civic location in PIDF-LO object during E911 call<BR>1: Do not add civic location in PIDF-LO object during E911 call in both LTE and WiFi<BR>2: Do not add civic location in PIDF-LO object during E911 call in LTE, add in WiFi only<BR>3: Do not add civic location in PIDF-LO object during E911 call in WiFi, add in LTE only<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:According to RFC5139, add civic location in PIDF<BR>1:Do not add civic location in PIDF<BR>2:Do not add civic location in PIDF",,,,IMS,IMS,,,"precondition<BR>set rm_civic_on_e911<BR>0: According to RFC5139, add civic location in PIDF-LO object during E911 call<BR><BR>1: Do not add civic location in PIDF-LO object during E911 call in both LTE and WIFI<BR><BR>2: Do not add civic location in PIDF-LO object during E911 call in LTE<BR><BR>3. : Do not add civic location in PIDF-LO object during E911 call in WIFI<BR><BR>IMS registered in VZW operator<BR><BR>test steps<BR>1.make emergency call over LTE <BR>check INVITE geolocation information as setting<BR>2. make emergency call over WIFI<BR>check INVITE geolocation information as setting",Pass,,,,
+8703,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_civic_on_e911,ua_config.rm_civic_on_e911,OTA and OTA BY OP,no,no,no,no,"According to RFC 5139, Civic location for PIDF-LO object could be added during E911 call, but some operators do not want to add location information during E911 call. If they do not want it, this configuration is set to 1.<BR>0: According to RFC5139, add civic location in PIDF-LO object during E911 call<BR>1: Do not add civic location in PIDF-LO object during E911 call in both LTE and WiFi<BR>2: Do not add civic location in PIDF-LO object during E911 call in LTE<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,"0:According to RFC5139, add civic location in PIDF<BR>1:Do not add civic location in PIDF<BR>2:Do not add civic location in PIDF",,,,IMS,IMS,,,"precondition<BR>set rm_civic_on_e911<BR>0: According to RFC5139, add civic location in PIDF-LO object during E911 call<BR><BR>1: Do not add civic location in PIDF-LO object during E911 call in both LTE and WIFI<BR><BR>2: Do not add civic location in PIDF-LO object during E911 call in LTE<BR><BR>3. : Do not add civic location in PIDF-LO object during E911 call in WIFI<BR><BR>IMS registered in VZW operator<BR><BR>test steps<BR>1.make emergency call over LTE <BR>check INVITE geolocation information as setting<BR>2. make emergency call over WIFI<BR>check INVITE geolocation information as setting",Pass,,,,
8704,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",rm_civic_on_e911.rm_civic_on_e911,ua_config.rm_civic_on_e911.rm_civic_on_e911,Not Support,no,no,no,no,"[MCF]<BR>According to RFC 5139, Civic location for PIDF-LO object could be added during E911 call, but some operators do not want to add location information during E911 call. If they do not want it, this configuration is set to 1.<BR>bit 0:0:According to RFC5139, add civic location in PIDF-LO object during E911 call<BR>bit 1:1:Do not add civic location in PIDF-LO object during E911 call in both LTE and WiFi<BR>bit 2:2:Do not add civic location in PIDF-LO object during E911 call in LTE",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
8705,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",t311_expired_release_call,ua_config.t311_expired_release_call,OTA and OTA BY OP,no,no,no,no,"If T311 timer timeout, UE should release current call (Softbank requirement)<BR>1: Release call<BR>0: Not release call<BR>",UNSIGNED CHAR,1,,,0,NR15.R3.MD700.IVT.MP1MR3.MP,,1: Release call<BR>0: Not release call "<BR>1:Release call<BR>0:Not release call,,,,IMS,IMS,,,Test in machine (Y/N)<BR>Test Time (minutes)<BR>[Init]<BR>Device register IMS successful<BR>[Test Step]<BR>1. Make a IMS call<BR>2. Move device to OOS area more than 1 minute<BR>[Expected Result]<BR>1. UE can release call after OOS timeout (T311 timer is based on network),Pass,,,,
8706,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",t311_expired_release_call.t311_expired_release_call,ua_config.t311_expired_release_call.t311_expired_release_call,Not Support,no,no,no,no,[MCF]<BR>wthere UE should release current call after T311 timer timeout<BR>bit 0:0:don't release call<BR>bit 1:1:release current call,BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,0:0,,,,,,,,,Untested,,,,
@@ -10608,7 +10608,7 @@
24131,961,NVRAM_EF_SBP_MODEM_DATA_CONFIG_LID,1,modem_sbp_data_config[165].SBP_SDM_WAIT_TIMER_VALUE_FOR_HO_PROC,modem_sbp_data_config[165].SBP_SDM_WAIT_TIMER_VALUE_FOR_HO_PROC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Data<BR>SDM wait timer for HO procedure",BIT,8,,8,0x03,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,MD Config,Modem - Customer Requirement,,,,Untested,,,,
24132,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_SA_LTE_B1_MEAS_SKIP_SERVING_MEAS_OBJECT_CHECK,modem_sbp_config[169].SBP_SA_LTE_B1_MEAS_SKIP_SERVING_MEAS_OBJECT_CHECK,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>NRRC Skips MeasObj Check of Serving Frequency for LTE B1 in SA mode during VoNR<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0,NR15.R3.MD700.IVT.MP1MR3.MP,,bit: 0/1:default bit:0 because workaround obviously violate spec,,,,MD Config,Modem - Customer Requirement,,,"1. SBP ON<BR>2. Camp on SA network that with Samsung Infra, e.g., VzW<BR>2. test for "measurement-based" EPSFB with network, <BR> and see if workaround works (B1 of LTE cell reported to network)",Pass,,,,
24164,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[172].SBP_NR_LARGE_BW_CELL_PREFER_FOR_NON_CA,modem_sbp_config[172].SBP_NR_LARGE_BW_CELL_PREFER_FOR_NON_CA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>prefer NR cell with large channel bandwidth for NON CA<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x01,NR15.R3.MD700.IVT.MP1MR3.MP,,0:Disabled<BR>1:Enabled,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None<BR>[Expected Result] None,Untested,,,,
-24165,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_sdp_ans_timer_timeout,ua_config.mo_sdp_ans_timer_timeout,OTA and OTA BY OP,no,no,no,no,"[MCF]limit the time Mo side take to receive init SDP Answer,start when init INVITE was send,It should large or equal than Tcall_Timer.<BR>0:Disable<BR>Unit:sec",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Config the sdp_ans_timer, if no SDP answer received after INVITE send, and timer expired,send CANCEL.",Untested,,,,
+24165,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mo_sdp_ans_timer_timeout,ua_config.mo_sdp_ans_timer_timeout,OTA and OTA BY OP,no,no,no,no,"limit the time Mo side take to receive init SDP Answer,start when init INVITE was send,It should large or equal than Tcall_Timer<BR>0:Disable<BR>Unit:sec<BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"Config the sdp_ans_timer, if no SDP answer received after INVITE send, and timer expired,send CANCEL.",Untested,,,,
24181,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[167].SBP_UMTS_BANDS_OPTIMIZATION_US_VERIZON,modem_sbp_config[167].SBP_UMTS_BANDS_OPTIMIZATION_US_VERIZON,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable Band 2 and Band 4<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
24185,1346,NVRAM_EF_VDM_ADS_PROFILE_LID,"1,2",send_ind_to_disable_nr_before_normal_search,profile_emerg.send_ind_to_disable_nr_before_normal_search,OTA BY OP,no,no,no,yes,"send_ind_to_disable_nr_before_normal_search (0/1: 0 - disable NV, 1 - enable NV)",UNSIGNED CHAR,1,,,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1,,,,MD Config,Modem - Customer Requirement,,,"Dish or Docomo operator change<BR><BR>EMC=0, EMF=0, dial emergency call when UE is registered over NR normal service",Pass,,,,
24186,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[169].SBP_NR_CAP_DISABLE_PUSCH_LBRM,modem_sbp_config[169].SBP_NR_CAP_DISABLE_PUSCH_LBRM,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>disable pusch_LBRM transmission in NR<BR>bit 0:0:Default behavior, NOT overwrite as disabled<BR>bit 1:1:Overwrite as disabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
@@ -10711,7 +10711,7 @@
26183,1345,NVRAM_EF_LTECSR_PROFILE_LID,"1,2",holdcall_dl_check_para,holdcall_dl_check_para,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>HOLDCALL_DL_CHECK sub switch for different timer<BR>bit 0:0:Disable all timer<BR>bit 1:1:Enable RTCP expire timer check,UNSIGNED SHORT,2,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:when HOLDCALL_DL_CHECK enabled, enable RTCP expire timer check<BR>0:when HOLDCALL_DL_CHECK enabled, disable all timer",,,,IMS,IMS,,,[Init]<BR>1. 2 DUT insert 2 Telcel SIM card<BR>2. 2 DUT VoLTE registered.<BR>[Test Step]<BR>1. Make a VoLTE call from DUT-A to DUT-B<BR>2. Hold call and unhold call 5 times in DUT-A<BR>3. Hold call and unhold call 5 times in DUT-B<BR>[Expected Result]<BR>call should not drop in test step 2 and 3,Untested,,,,
26184,1345,NVRAM_EF_LTECSR_PROFILE_LID,"1,2",holdcall_dl_check_para.holdcall_dl_check_para,holdcall_dl_check_para.holdcall_dl_check_para,OTA and OTA BY OP,no,no,no,no,[MCF]<BR>HOLDCALL_DL_CHECK sub switch for different timer<BR>bit 0:0:Disable all timer<BR>bit 1:1:Enable RTCP expire timer check,BIT,16,,16,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,"0x01:when HOLDCALL_DL_CHECK enabled, enable RTCP expire timer check<BR>0:when HOLDCALL_DL_CHECK enabled, disable all timer",,,,IMS,IMS,,,[Init]<BR>1. 2 DUT insert 2 Telcel SIM card<BR>2. 2 DUT VoLTE registered.<BR>[Test Step]<BR>1. Make a VoLTE call from DUT-A to DUT-B<BR>2. Hold call and unhold call 5 times in DUT-A<BR>3. Hold call and unhold call 5 times in DUT-B<BR>[Expected Result],Untested,,,,
26187,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[149].SBP_OP12_PERMANENT_FTA_LIST,modem_sbp_config[149].SBP_OP12_PERMANENT_FTA_LIST,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Support permanent FTA list<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,bit:0/1,,,,MD Config,Modem - Customer Requirement,,,Test in machine (N)<BR>Test Time (0 minutes)<BR>[Init] follow MCF RD IT plan<BR>[Test Step] None,Pass,,,,
-26221,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",quick_call_replacing,ua_config.quick_call_replacing,OTA and OTA BY OP,no,no,no,no,[MCF],UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
+26221,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",quick_call_replacing,ua_config.quick_call_replacing,OTA and OTA BY OP,no,no,no,no,"If the replaced call is in Active, for call replacing procedure we shall send 200 ok directly<BR>0:Disabled<BR>1:Enabled<BR>",UNSIGNED CHAR,1,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
26222,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",quick_call_replacing.quick_call_replacing,ua_config.quick_call_replacing.quick_call_replacing,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>If the replaced call is in Active,for call replacing procedure we shall send 200 ok directly.<BR>bit 0:0:Disable<BR>bit 1:1:Enable<BR>",BIT,8,,8,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
26233,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[173].SBP_DISABLE_5G_SA_CALL_HO_TO_VOWIFI,modem_sbp_config[173].SBP_DISABLE_5G_SA_CALL_HO_TO_VOWIFI,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Disable 5G SA when call setup on VoLTE with PDN handover to VoWiFi<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1:enable/disable",,,,MiA (Modem intelligence agent),MiA,,,enable/disable SBP feature and test vowifi call,Untested,,,,
26234,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[173].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,modem_sbp_config[173].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UE will NOT do local release when disable 5G SA for VoWiFi<BR>bit 0:0:Not Enabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,"0,1:enable/disable",,,,MiA (Modem intelligence agent),MiA,,,enable/disable SBP feature and test vowifi call,Untested,,,,
@@ -10818,8 +10818,8 @@
31608,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[180].SBP_UAS_NOT_CAMP_CUSTOM_MCC,modem_sbp_config[180].SBP_UAS_NOT_CAMP_CUSTOM_MCC,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>UAS NOT CAMP JP MCC<BR>bit 0:0:Disabled<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
31659,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",mwi_resubscribe_timer,ua_config.mwi_resubscribe_timer,OTA and OTA BY OP,no,no,no,no,"[MCF]This defines the MWI re-subscribe interval in seconds. If the value is 0, Attempt the initial mwi subscription only once even if the initial subscription fails. When set to have non-zero value and subscription/re-subscription fails, the subsciber should periodically retry again. AN:unit: sec",UNSIGNED SHORT,2,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
31661,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[173].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA_NR,modem_sbp_config[173].SBP_LOCAL_RELEASE_FOR_VOWIFI_DISABLE_5G_SA_NR,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>Obsolete ,This feature is renamed here to make it obsolete and redefined in sbp_data.def<BR>bit 0:0:N/A<BR>bit 1:1:N/A",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,0/1:enable/disable,,,,MiA (Modem intelligence agent),MiA,,,enable/disable SBP feature and test vowifi call,Untested,,,,
-31933,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_Retransmit_Count,ua_config.VoLTE_Setting_SIP_TCP_Retransmit_Count,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>The max TCP retransmit count of SIP, default value is 7. Can used with config VoLTE_Setting_SIP_TCP_Retransmit_Interval. If Call end by other timer expired, such as TCall, TimerB and other 3GPP timer expire, the SIP over TCP retransmit haven't help to keep call alive.",UNSIGNED INT,4,,,7,NR15.R3.MD700.IVT.MP1MR3.MP,,uint: 1 ~XX:set the SIP message TCP retransmit count,,,,IMS,IMS,,,"config two NV to available value, and check the TCP retry count and interval",Untested,,,,
-31934,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_Retransmit_Interval,ua_config.VoLTE_Setting_SIP_TCP_Retransmit_Interval,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>The max TCP retransmit Interval of SIP, default value is 2000ms. Can used with config VoLTE_Setting_SIP_TCP_Retransmit_Count. If Call end by other timer expired, such as TCall, TimerB and other 3GPP timer expire, the SIP over TCP retransmit haven't help to keep call alive.",UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"config two NV to available value, and check the TCP retry count and interval ",Untested,,,,
+31933,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_Retransmit_Count,ua_config.VoLTE_Setting_SIP_TCP_Retransmit_Count,OTA and OTA BY OP,no,no,no,no," The max TCP retransmit count of SIP,default value is 7<BR>",UNSIGNED INT,4,,,7,NR15.R3.MD700.IVT.MP1MR3.MP,,uint: 1 ~XX:set the SIP message TCP retransmit count,,,,IMS,IMS,,,"config two NV to available value, and check the TCP retry count and interval",Untested,,,,
+31934,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_Retransmit_Interval,ua_config.VoLTE_Setting_SIP_TCP_Retransmit_Interval,OTA and OTA BY OP,no,no,no,no," The TCP retransmit interval of SIP,default value is 2000ms<BR>",UNSIGNED INT,4,,,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"config two NV to available value, and check the TCP retry count and interval ",Untested,,,,
32164,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_Retransmit_Count.VoLTE_Setting_SIP_TCP_Retransmit_Count,ua_config.VoLTE_Setting_SIP_TCP_Retransmit_Count.VoLTE_Setting_SIP_TCP_Retransmit_Count,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>The max TCP retransmit count of SIP, default value is 7. Can used with config VoLTE_Setting_SIP_TCP_Retransmit_Interval. If Call end by other timer expired, such as TCall, TimerB and other 3GPP timer expire, the SIP over TCP retransmit haven't help to keep call alive.",BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"config two NV to available value, and check the TCP retry count and interval",Untested,,,,
32165,1344,NVRAM_EF_IMS_PROFILE_LID,"1,2",VoLTE_Setting_SIP_TCP_Retransmit_Interval.VoLTE_Setting_SIP_TCP_Retransmit_Interval,ua_config.VoLTE_Setting_SIP_TCP_Retransmit_Interval.VoLTE_Setting_SIP_TCP_Retransmit_Interval,OTA and OTA BY OP,no,no,no,no,"[MCF]<BR>The max TCP retransmit Interval of SIP, default value is 2000ms. Can used with config VoLTE_Setting_SIP_TCP_Retransmit_Count. If Call end by other timer expired, such as TCall, TimerB and other 3GPP timer expire, the SIP over TCP retransmit haven't help to keep call alive.",BIT,32,,32,0xff,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,IMS,IMS,,,"config two NV to available value, and check the TCP retry count and interval ",Untested,,,,
32670,960,NVRAM_EF_SBP_MODEM_CONFIG_LID,1,modem_sbp_config[181].SBP_L5_PRIVATE_ECALL_PRIORITY_SETTING,modem_sbp_config[181].SBP_L5_PRIVATE_ECALL_PRIORITY_SETTING,OTA and OTA BY OP,no,no,no,yes,"[MCF,RUNTIME] Configuration of SBP Feature<BR>set private ecall priority same as normal call priority<BR>bit 0:0:Disable<BR>bit 1:1:Enabled<BR>",BIT,1,,1,0x00,NR15.R3.MD700.IVT.MP1MR3.MP,,,,,,,,,,,Untested,,,,
diff --git a/mcu/interface/service/icd/nl1/NL1_Physical_Configuration.h b/mcu/interface/service/icd/nl1/NL1_Physical_Configuration.h
index 2be17cc..6b8e76e 100644
--- a/mcu/interface/service/icd/nl1/NL1_Physical_Configuration.h
+++ b/mcu/interface/service/icd/nl1/NL1_Physical_Configuration.h
@@ -1,10 +1,23 @@
+/*****************************************************************************
+ *
+ * Copyright (c) 2021, MediaTek Inc. All rights reserved.
+ * This software/firmware and related documentation ("MediaTek Software") are
+ * protected under relevant copyright laws. The information contained herein is
+ * confidential and proprietary to MediaTek Inc. and/or its licensors. Except as
+ * otherwise provided in the applicable licensing terms with MediaTek Inc.
+ * and/or its licensors, any reproduction, modification, use or disclosure of
+ * MediaTek Software, and information contained herein, in whole or in part,
+ * shall be strictly prohibited.
+ *
+ *****************************************************************************/
+
// ICD Header Format v3
// Name : NL1_Physical_Configuration
// Category : NR
// Layer : NL1
// Type : RECORD
// Code : 0x9014
-// Version : t-internal-nr-icd-draft3RC1-376-g2f8de9e
+// Version : t-internal-nr-icd-draft3RC1-498-gf16e962
#ifndef _NL1_PHYSICAL_CONFIGURATION_H
#define _NL1_PHYSICAL_CONFIGURATION_H
@@ -14,11 +27,11 @@
#define ICD_NL1_PHYSICAL_CONFIGURATION 0x9014
-#define ICD_NL1_NL1_PHY_CONFIG_V21 21
+#define ICD_NL1_NL1_PHY_CONFIG_V25 25
-#define MAX_ICD_NL1_PHYSICAL_CONFIGURATION_STRUCT_V21_NUMBER_OF_SCELL 8
+#define MAX_ICD_NL1_PHYSICAL_CONFIGURATION_STRUCT_V25_NUMBER_OF_SCELL 8
-#define ICD_NL1_PHYSICAL_CONFIGURATION_STRUCT_V21_MAX_SIZE 1532
+#define ICD_NL1_PHYSICAL_CONFIGURATION_STRUCT_V25_MAX_SIZE 1920
typedef struct {
kal_uint32 pcch_config_idle_valid:1; // Enum{0: invalid, 1: valid}, valid once UE enters idle mode
@@ -46,8 +59,8 @@
typedef nl1_trs_config_v1 nl1_trs_config;
typedef struct {
- kal_uint32 bwp_id:3; // range[0, 4]
- kal_uint32 bwp_start:9;
+ kal_uint32 bwp_id:3; // range[0, 4]. 0: initial
+ kal_uint32 bwp_start:9; // Initial position of BWP as defined in TS 38.213 clause 12
kal_uint32 bwp_size:9; // range[0, 275]
kal_uint32 sub_carrier_spacing:3; // {0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz
// Enum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}
@@ -94,16 +107,19 @@
// 4:CRI_RI_CQI,5:CRI_RSRP,6:SSB Index RSRP,7:CRI_RI_LI_PMI_CQ}
kal_uint32 cqi_reporting_granularity:1; // Enum{0: wideband, 1: subband}
kal_uint32 pmi_reporting_granularity:1; // Enum{0: wideband, 1: subband}
- kal_uint32 reserved:4;
+ kal_uint32 cqi_table_valid:1; // Enum{0: Invalid, 1: Valid}
+ kal_uint32 cqi_table_index:2; // Range[1,3]
+ kal_uint32 reserved:1;
kal_uint32 number_of_subbands:5; // range[3, 19]
kal_uint32 subband_size:6; // 4 or 8 or 16 or 32
kal_uint32 codebook_config:2; // Enum{0: Type I Single Panel, 1:Type I Multi Panel,2: Type II,
// 3: Type II Port Selection}
- kal_uint32 reserved_1:19;
- nl1_nzp_csi_rs_resource nzp_csi_rs_resource;
-} nl1_csi_report_config_v2;
+ kal_uint32 report_offset:9; // range[0, 319]
+ kal_uint32 reserved_1:10;
+ nl1_nzp_csi_rs_resource nzp_csi_rs_resource; // Information of non-zero-power CSI-RS resource (version 2)
+} nl1_csi_report_config_v4;
-typedef nl1_csi_report_config_v2 nl1_csi_report_config;
+typedef nl1_csi_report_config_v4 nl1_csi_report_config;
typedef struct {
kal_uint32 valid:1; // Enum{0: Invalid, 1: Valid}
@@ -129,7 +145,7 @@
kal_uint16 alpha:3; // Enum{0:0,1: 0_4, 2: 0_5, 3: 0_6, 4: 0_7, 5: 0_8, 6: 0_9, 7: 1}
kal_uint16 reserved:7;
kal_int16 p0; // range[-202, 24]
- nl1_srs_resource_config srs_resources[4];
+ nl1_srs_resource_config srs_resources[4]; // Information of SRS resource configuration (version 2)
} nl1_srs_resource_set_config_v2;
typedef nl1_srs_resource_set_config_v2 nl1_srs_resource_set_config;
@@ -197,7 +213,7 @@
kal_uint32 additional_dmrs:4; // Bit 0 means format 1, bit 1 means format 2, and so on.
// Value 0 means disabled, value 1 means enabled.
kal_uint32 reserved:21;
- nl1_sr_resource_config sr_resource_config[8];
+ nl1_sr_resource_config sr_resource_config[8]; // Information of scheduling request resource configuration (v1)
} nl1_pucch_config_v3;
typedef nl1_pucch_config_v3 nl1_pucch_config;
@@ -226,9 +242,11 @@
kal_uint32 cb_preambles_per_ssb:6; // range[1, 63]
kal_uint32 msg1_scs:3; // Enum{0:15KHz,1:30KHz,2:60KHz,3:120KHz,4:240KHz,5:Invalid}
kal_uint32 reserved_1:23;
- kal_int16 preamble_target_power;
- kal_int16 ssb_rsrp_threshold;
- kal_int16 sul_rsrp_threshold; // 0 means invalid
+ kal_int16 preamble_target_power; // Initial preamble power as defined in TS 38.321-5.1.3
+ kal_int16 ssb_rsrp_threshold; // RSRP threshold for the selection of SSB
+ // as defined in TS 38.321 - 5.1.1
+ kal_int16 sul_rsrp_threshold; // RSRP threshold for the selection between NUL and SUL carrier
+ // as defined in TS 38.321 - 5.1.1
kal_int16 reserved_2;
} nl1_rach_config_v2;
@@ -252,13 +270,13 @@
typedef struct {
kal_uint32 valid:1; // Enum{0: Invalid, 1: Valid}
kal_uint32 ul_narfcn:22; // Uplink NR-ARFCN of Point A
- kal_uint32 ul_frequency_band:8;
+ kal_uint32 ul_frequency_band:8; // range[80, 89]. Frequency band index for SUL
kal_uint32 reserved:1;
- nl1_tdd_ul_dl_pattern tdd_pattern[2];
- nl1_rach_config rach_config;
- nl1_pusch_config pusch_config;
- nl1_pucch_config pucch_config;
- nl1_bwp_config active_ul_bwp_config;
+ nl1_tdd_ul_dl_pattern tdd_pattern[2]; // Information of TDD pattern (version 1)
+ nl1_rach_config rach_config; // Information of RACH configuration (version 2)
+ nl1_pusch_config pusch_config; // Information of PUSCH configuration (version 3)
+ nl1_pucch_config pucch_config; // Information of PUCCH configuration (version 3)
+ nl1_bwp_config active_ul_bwp_config; // Configuration of active uplink BWP (version 3)
} nl1_sul_config_v2;
typedef nl1_sul_config_v2 nl1_sul_config;
@@ -266,9 +284,10 @@
typedef struct {
kal_uint32 physical_cell_id:10; // range[0, 1007]
kal_uint32 dl_narfcn:22; // Downlink NR-ARFCN of SSB
- kal_uint32 dl_frequency_band:8;
+ kal_uint32 dl_frequency_band:8; // Frequency band index of FR1
kal_uint32 cell_index:4; // range[1, 9]
kal_uint32 ul_cc_index:2; // range[1, 2]
+ kal_uint32 scell_index:5; // range[1, 31]
kal_uint32 ul_carrier_bandwidth:4; // Quantized bandwidth in MHz
// Enum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,
// 7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,
@@ -277,28 +296,29 @@
// Enum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,
// 7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,
// 13:400MHz}
- kal_uint32 reserved:10;
- nl1_tdd_ul_dl_pattern tdd_pattern[2];
+ kal_uint32 reserved:5;
+ nl1_tdd_ul_dl_pattern tdd_pattern[2]; // Information of TDD pattern (version 1)
kal_uint32 ul_narfcn:22; // Uplink NR-ARFCN of Point A
- kal_uint32 ul_frequency_band:8;
+ kal_uint32 ul_frequency_band:8; // Frequency band index of FR1
kal_uint32 cell_type:1; // Enum{0: DL+UL, 1: Only DL}
kal_uint32 reserved_1:1;
- nl1_pusch_config pusch_config;
- nl1_pucch_config pucch_config;
- nl1_pdcch_search_space_config pdcch_common_search_space_config[2];
- nl1_pdcch_search_space_config pdcch_ue_specific_search_space_config[2];
- nl1_pdsch_config pdsch_config;
- nl1_bwp_config active_ul_bwp_config;
- nl1_bwp_config active_dl_bwp_config;
+ nl1_pusch_config pusch_config; // Information of PUSCH configuration (version 3)
+ nl1_pucch_config pucch_config; // Information of PUCCH configuration (version 3)
+ nl1_pdcch_search_space_config pdcch_common_search_space_config[2]; // CSS configuration
+ nl1_pdcch_search_space_config pdcch_ue_specific_search_space_config[2]; // USS configuration
+ nl1_pdsch_config pdsch_config; // Information of PDSCH configuration (version 5)
+ nl1_bwp_config active_ul_bwp_config; // Configuration of active uplink BWP (version 3)
+ nl1_bwp_config active_dl_bwp_config; // Configuration of active downlink BWP (version 3)
kal_uint32 ul_center_frequency; // Unit: 5khz
kal_uint32 dl_center_frequency; // Unit: 5khz
kal_uint32 dl_point_a_narfcn:22; // Downlink NR-ARFCN of Point A
kal_uint32 reserved_2:10;
kal_uint32 ul_point_a_narfcn:22; // Uplink NR-ARFCN of Point A
kal_uint32 reserved_3:10;
-} nl1_scell_config_v10;
+ nl1_csi_report_config csi_report_config[4]; // Information of CSI report configuration (version 4)
+} nl1_scell_config_v14;
-typedef nl1_scell_config_v10 nl1_scell_config;
+typedef nl1_scell_config_v14 nl1_scell_config;
typedef struct {
kal_uint32 gap_valid:1; // 0: Gap is not configured,
@@ -313,32 +333,45 @@
typedef nl1_gap_config_v1 nl1_gap_config;
typedef struct {
- kal_uint32 version:8; // Log record structure ID
+ kal_uint32 serv_cell_index:8; // Serving cell ID of a PSCell.
+ // The PCell of the Master Cell Group uses ID = 0.
+ kal_uint32 t310:4; // Enum{0:ms0, 1:ms50, 2:ms100, 3:ms200, 4:ms500, 5:ms1000,
+ // 6:ms2000, 7:ms4000, 8:ms6000}
+ kal_uint32 n310:3; // Enum{0:n1, 1:n2, 2:n3, 3:n4, 4:n6, 5:n8, 6:n10, 7:n20}
+ kal_uint32 n311:3; // Enum{0:n1, 1:n2, 2:n3, 3:n4, 4:n5, 5:n6, 6:n8, 7:n10}
+ kal_uint32 reserved:14;
+} nl1_spcell_config_v1;
+
+typedef nl1_spcell_config_v1 nl1_spcell_config;
+
+typedef struct {
+ kal_uint32 version:8; // Actual version of this log record
kal_uint32 ue_category:5; // range[0, 15]
kal_uint32 physical_cell_id:10; // range[0, 1007]
kal_uint32 number_of_transmitted_ssb:9; // range[1, 64]
kal_uint32 dl_narfcn:22; // Downlink NR-ARFCN of SSB
- kal_uint32 dl_frequency_band:8;
- kal_uint32 reserved:2;
- nl1_tdd_ul_dl_pattern tdd_pattern[2];
+ kal_uint32 dl_frequency_band:8; // Frequency band index of FR1
+ kal_uint32 cell_group_id:1; // range[0, 1]
+ kal_uint32 reserved:1;
+ nl1_tdd_ul_dl_pattern tdd_pattern[2]; // Information of TDD pattern (version 1)
kal_uint32 ul_narfcn:22; // Uplink NR-ARFCN of Point A
kal_uint32 srs_switch_type:3; // Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}
kal_uint32 srs_enable:1; // Enum{0: disable, 1: enable}
kal_uint32 ssb_periodicity:3; // Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}
kal_uint32 number_of_scell:3; // range[0, 8]
kal_uint32 dl_point_a_narfcn:22; // Downlink NR-ARFCN of Point A
- kal_uint32 ul_frequency_band:8;
+ kal_uint32 ul_frequency_band:8; // Frequency band index of FR1
kal_uint32 cp_type:1; // Enum{0: Normal, 1: Extended}
kal_uint32 reserved_1:1;
- nl1_rach_config rach_config;
- nl1_pusch_config pusch_config;
- nl1_pucch_config pucch_config;
- nl1_pdcch_search_space_config pdcch_common_search_space_config[2];
- nl1_pdcch_search_space_config pdcch_ue_specific_search_space_config[2];
- nl1_pdsch_config pdsch_config;
- nl1_srs_resource_set_config srs_resource_set_config;
- nl1_csi_report_config csi_report_config[4];
- nl1_antenna_config antenna_config;
+ nl1_rach_config rach_config; // Information of RACH configuration (version 2)
+ nl1_pusch_config pusch_config; // Information of PUSCH configuration (version 3)
+ nl1_pucch_config pucch_config; // Information of PUCCH configuration (version 3)
+ nl1_pdcch_search_space_config pdcch_common_search_space_config[2]; // CSS configuration
+ nl1_pdcch_search_space_config pdcch_ue_specific_search_space_config[2]; // USS configuration
+ nl1_pdsch_config pdsch_config; // Information of PDSCH configuration (version 5)
+ nl1_srs_resource_set_config srs_resource_set_config; // Information of SRS resource set configuration (version 2)
+ nl1_csi_report_config csi_report_config[4]; // Information of CSI report configuration (version 2)
+ nl1_antenna_config antenna_config; // Information of antenna configuration (version 1)
kal_uint32 ul_carrier_bandwidth:4; // Quantized bandwidth in MHz
// Enum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,
// 7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,
@@ -350,9 +383,9 @@
kal_uint32 reserved_2:18;
kal_uint32 default_dl_bwp_id:3; // range[0, 4]
kal_uint32 number_of_dl_bwp:3; // range[1, 4]
- nl1_bwp_config active_ul_bwp_config;
- nl1_bwp_config active_dl_bwp_config;
- nl1_trs_config trs_config[8];
+ nl1_bwp_config active_ul_bwp_config; // Configuration of active uplink BWP (version 3)
+ nl1_bwp_config active_dl_bwp_config; // Configuration of active downlink BWP (version 3)
+ nl1_trs_config trs_config[8]; // Configuration of tracking reference signal (version 1)
nl1_pcch_config pcch_config; // PCCH Config in idle mode
kal_uint32 ue_power_class:3; // 1,2,3,4, 0:INVALID, range[0, 4]
kal_uint32 ul_point_a_narfcn:22; // Uplink NR-ARFCN of Point A
@@ -360,18 +393,19 @@
kal_uint32 reserved_3:4;
kal_uint32 ul_center_frequency; // Unit: 5khz
kal_uint32 dl_center_frequency; // Unit: 5khz
- nl1_gap_config gap_config;
- nl1_sul_config sul_config;
+ nl1_spcell_config spcell_config; // Information of SpCell Configuration (version 1)
+ nl1_gap_config gap_config; // Information of measurement gap (version 1)
+ nl1_sul_config sul_config; // Information of SUL configuration (version 2)
nl1_scell_config scell_config[FLEXIBLE_ARRAY_SIZE]; // N := Number of Scell
-} icd_nl1_physical_configuration_struct_v21;
+} icd_nl1_physical_configuration_struct_v25;
-typedef icd_nl1_physical_configuration_struct_v21 icd_nl1_physical_configuration_struct;
+typedef icd_nl1_physical_configuration_struct_v25 icd_nl1_physical_configuration_struct;
#endif /* _NL1_PHYSICAL_CONFIGURATION_H */
/* Public JSON start
-"NL1_Physical_Configuration": {"info": {"Category": "NR", "Layer": "L1", "Code": "0x9014", "Name": "NL1_Physical_Configuration", "Type": "RECORD", "Desc": "This log packet contains the important parameters of physical channel configuration. The log is generated every 1000ms or once when the parameters are updated.\n"}, "table": {"NL1_Physical_Configuration": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Version", "UINT32", "1", "0", "8", "Log record structure ID"], "1": ["Versions", "NL1_PHY_Config_Versions", "1", "8", "VAR", ""]}, "Name": "NL1_Physical_Configuration"}, "NL1_PHY_Config_Versions": {"ColNum": 3, "Header": ["ID", "Type Name", "Description"], "Data": {"0": ["6", "NL1_PHY_Config_V6", ""], "1": ["7", "NL1_PHY_Config_V7", ""], "2": ["8", "NL1_PHY_Config_V8", ""], "3": ["9", "NL1_PHY_Config_V9", ""], "4": ["10", "NL1_PHY_Config_V10", ""], "5": ["11", "NL1_PHY_Config_V11", ""], "6": ["12", "NL1_PHY_Config_V12", ""], "7": ["13", "NL1_PHY_Config_V13", ""], "8": ["14", "NL1_PHY_Config_V14", ""], "9": ["15", "NL1_PHY_Config_V15", ""], "10": ["16", "NL1_PHY_Config_V16", ""], "11": ["17", "NL1_PHY_Config_V17", ""], "12": ["18", "NL1_PHY_Config_V18", ""], "13": ["19", "NL1_PHY_Config_V19", ""], "14": ["20", "NL1_PHY_Config_V20", ""], "15": ["21", "NL1_PHY_Config_V21", ""], "16": ["22", "NL1_PHY_Config_V22", ""]}, "Name": "NL1_PHY_Config_Versions"}, "NL1_PHY_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["Carrier Index", "UINT32", "1", "46", "3", "range[0, 7]"], "5": ["DL Frequency Band", "UINT32", "1", "49", "7", "range[1, 89]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Reserved", "UINT32", "1", "213", "3", ""], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Cell Type", "UINT32", "1", "245", "1", "Enum{0: PCell, 1: SCell}"], "15": ["Reserved", "UINT32", "1", "246", "2", ""], "16": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", ""], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", ""], "18": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "376", "32", ""], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "408", "128", ""], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "536", "128", ""], "21": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "664", "32", ""], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "696", "288", ""], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "984", "384", ""], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1368", "32", ""], "25": ["Active UL BWP Config", "NL1_BWP_Config_V1", "1", "1400", "64", ""], "26": ["Active DL BWP Config", "NL1_BWP_Config_V1", "1", "1464", "64", ""], "27": ["TRS Config", "NL1_TRS_Config_V1", "8", "1528", "256", ""]}, "Name": "NL1_PHY_Config_V6"}, "NL1_PHY_Config_V7": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["Carrier Index", "UINT32", "1", "46", "3", "range[0, 7]"], "5": ["DL Frequency Band", "UINT32", "1", "49", "7", "range[1, 89]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Reserved", "UINT32", "1", "213", "3", ""], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Cell Type", "UINT32", "1", "245", "1", "Enum{0: PCell, 1: SCell}"], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", ""], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", ""], "19": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "376", "32", ""], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "408", "128", ""], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "536", "128", ""], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "664", "32", ""], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "696", "288", ""], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "984", "384", ""], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1368", "32", ""], "26": ["Active UL BWP Config", "NL1_BWP_Config_V2", "1", "1400", "96", ""], "27": ["Active DL BWP Config", "NL1_BWP_Config_V2", "1", "1496", "96", ""], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1592", "256", ""]}, "Name": "NL1_PHY_Config_V7"}, "NL1_PHY_Config_V8": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V8", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["Reserved", "UINT32", "1", "46", "3", ""], "5": ["DL Frequency Band", "UINT32", "1", "49", "7", "range[1, 89]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", ""], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", ""], "19": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "376", "32", ""], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "408", "128", ""], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "536", "128", ""], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "664", "32", ""], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "696", "288", ""], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "984", "384", ""], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1368", "32", ""], "26": ["Active UL BWP Config", "NL1_BWP_Config_V2", "1", "1400", "96", ""], "27": ["Active DL BWP Config", "NL1_BWP_Config_V2", "1", "1496", "96", ""], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1592", "256", ""], "29": ["Scell Config", "NL1_Scell_Config_V1", "N", "1848", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V9": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V9", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "7", "range[1, 89]"], "5": ["Reference Subcarrier Spacing", "UINT32", "1", "53", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", ""], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", ""], "19": ["PUCCH Config", "NL1_PUCCH_Config_V2", "1", "376", "288", ""], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "664", "128", ""], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "792", "128", ""], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "920", "32", ""], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "952", "288", ""], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1240", "384", ""], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1624", "32", ""], "26": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1656", "96", ""], "27": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1752", "96", ""], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1848", "256", ""], "29": ["Scell Config", "NL1_Scell_Config_V1", "N", "2104", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V10": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V10", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "7", "range[1, 89]"], "5": ["Reference Subcarrier Spacing", "UINT32", "1", "53", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", ""], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", ""], "19": ["PUCCH Config", "NL1_PUCCH_Config_V2", "1", "376", "288", ""], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "664", "128", ""], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "792", "128", ""], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "920", "32", ""], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "952", "288", ""], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1240", "384", ""], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1624", "32", ""], "26": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1656", "96", ""], "27": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1752", "96", ""], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1848", "256", ""], "29": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2104", "32", "PCCH Config in idle mode"], "30": ["UE Power Class", "UINT32", "1", "2136", "3", "1,2,3,4, 0:INVALID, Range[0,4]"], "31": ["Reserved", "UINT32", "1", "2139", "29", ""], "32": ["Scell Config", "NL1_Scell_Config_V1", "N", "2168", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V11": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V11", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "7", "range[1, 89]"], "5": ["Reference Subcarrier Spacing", "UINT32", "1", "53", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", ""], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", ""], "19": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "376", "288", ""], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "664", "128", ""], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "792", "128", ""], "22": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "920", "32", ""], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "952", "288", ""], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1240", "384", ""], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1624", "32", ""], "26": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1656", "96", ""], "27": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1752", "96", ""], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1848", "256", ""], "29": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2104", "32", "PCCH Config in idle mode"], "30": ["UE Power Class", "UINT32", "1", "2136", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "31": ["UL Point A NARFCN", "UINT32", "1", "2139", "22", "Uplink NR-ARFCN of Point A"], "32": ["Reserved", "UINT32", "1", "2161", "7", ""], "33": ["UL Center Frequency", "UINT32", "1", "2168", "32", "Unit: 5khz"], "34": ["DL Center Frequency", "UINT32", "1", "2200", "32", "Unit: 5khz"], "35": ["Scell Config", "NL1_Scell_Config_V2", "N", "2232", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V12": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V12", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "8", ""], "5": ["Reserved", "UINT32", "1", "54", "2", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "8", ""], "14": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "15": ["Reserved", "UINT32", "1", "247", "1", ""], "16": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "376", "32", ""], "18": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "21": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "952", "32", ""], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "984", "288", ""], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1272", "384", ""], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1656", "32", ""], "25": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1688", "96", ""], "26": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1784", "96", ""], "27": ["TRS Config", "NL1_TRS_Config_V1", "8", "1880", "256", ""], "28": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2136", "32", "PCCH Config in idle mode"], "29": ["UE Power Class", "UINT32", "1", "2168", "3", "1,2,3,4, 0:INVALID, Range[0, 4]"], "30": ["UL Point A NARFCN", "UINT32", "1", "2171", "22", "Uplink NR-ARFCN of Point A"], "31": ["Reference Subcarrier Spacing", "UINT32", "1", "2193", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "32": ["Reserved", "UINT32", "1", "2196", "4", ""], "33": ["UL Center Frequency", "UINT32", "1", "2200", "32", "Unit: 5khz"], "34": ["DL Center Frequency", "UINT32", "1", "2232", "32", "Unit: 5khz"], "35": ["Gap Config", "NL1_Gap_Config_V1", "1", "2264", "32", ""], "36": ["SUL Config", "NL1_SUL_Config_V1", "1", "2296", "32", ""], "37": ["Scell Config", "NL1_Scell_Config_V3", "N", "2328", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V13": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V13", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "8", ""], "5": ["Reserved", "UINT32", "1", "54", "2", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "8", ""], "14": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "15": ["Reserved", "UINT32", "1", "247", "1", ""], "16": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "376", "32", ""], "18": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "21": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "952", "32", ""], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "984", "288", ""], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1272", "384", ""], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1656", "32", ""], "25": ["Reserved", "UINT32", "1", "1688", "26", ""], "26": ["Default DL BWP Id", "UINT32", "1", "1714", "3", "range[0, 4]"], "27": ["Number of DL BWP", "UINT32", "1", "1717", "3", "range[1, 4]"], "28": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1720", "96", ""], "29": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1816", "96", ""], "30": ["TRS Config", "NL1_TRS_Config_V1", "8", "1912", "256", ""], "31": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2168", "32", "PCCH Config in idle mode"], "32": ["UE Power Class", "UINT32", "1", "2200", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "33": ["UL Point A NARFCN", "UINT32", "1", "2203", "22", "Uplink NR-ARFCN of Point A"], "34": ["Reference Subcarrier Spacing", "UINT32", "1", "2225", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "35": ["Reserved", "UINT32", "1", "2228", "4", ""], "36": ["UL Center Frequency", "UINT32", "1", "2232", "32", "Unit: 5khz"], "37": ["DL Center Frequency", "UINT32", "1", "2264", "32", "Unit: 5khz"], "38": ["Gap Config", "NL1_Gap_Config_V1", "1", "2296", "32", ""], "39": ["SUL Config", "NL1_SUL_Config_V2", "1", "2328", "704", ""], "40": ["Scell Config", "NL1_Scell_Config_V3", "N", "3032", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V14": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V14", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", ""], "5": ["Reserved", "UINT32", "1", "55", "1", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", ""], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", ""], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, rang[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "38": ["SUL Config", "NL1_SUL_Config_V3", "1", "2456", "704", ""], "39": ["Scell Config", "NL1_Scell_Config_V4", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V15": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V15", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", ""], "5": ["Reserved", "UINT32", "1", "55", "1", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", ""], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", ""], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "38": ["SUL Config", "NL1_SUL_Config_V3", "1", "2456", "704", ""], "39": ["Scell Config", "NL1_Scell_Config_V5", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V16": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V16", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261]"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "range[0, 261]"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", ""], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", ""], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "38": ["SUL Config", "NL1_SUL_Config_V3", "1", "2456", "704", ""], "39": ["Scell Config", "NL1_Scell_Config_V6", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V17": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V17", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261]"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "range[0, 261]"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", ""], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", ""], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "38": ["SUL Config", "NL1_SUL_Config_V4", "1", "2456", "704", ""], "39": ["Scell Config", "NL1_Scell_Config_V7", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V18": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V18", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261]"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "range[0, 261]"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", ""], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", ""], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "38": ["SUL Config", "NL1_SUL_Config_V4", "1", "2456", "704", ""], "39": ["Scell Config", "NL1_Scell_Config_V8", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V19": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V19", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261]"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "range[0, 261]"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "1848", "96", ""], "28": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1944", "96", ""], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "38": ["SUL Config", "NL1_SUL_Config_V5", "1", "2456", "704", ""], "39": ["Scell Config", "NL1_Scell_Config_V9", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V20": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V20", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261]"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "range[0, 261]"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Cell Group Type", "UINT32", "1", "1816", "1", "Enum{0:MCG, 1:SCG}"], "25": ["Reserved", "UINT32", "1", "1817", "25", ""], "26": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "27": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "28": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "1848", "96", ""], "29": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1944", "96", ""], "30": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "31": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "32": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "33": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "34": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "35": ["Reserved", "UINT32", "1", "2356", "4", ""], "36": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "37": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "38": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "39": ["SUL Config", "NL1_SUL_Config_V5", "1", "2456", "704", ""], "40": ["Scell Config", "NL1_Scell_Config_V9", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V21": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V21", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "8", ""], "5": ["Reserved", "UINT32", "1", "54", "2", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "8", ""], "14": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "15": ["Reserved", "UINT32", "1", "247", "1", ""], "16": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "376", "32", ""], "18": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "21": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "952", "32", ""], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "984", "288", ""], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1272", "384", ""], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1656", "32", ""], "25": ["UL Carrier Bandwidth", "UINT32", "1", "1688", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "26": ["DL Carrier Bandwidth", "UINT32", "1", "1692", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "27": ["Reserved", "UINT32", "1", "1696", "18", ""], "28": ["Default DL BWP Id", "UINT32", "1", "1714", "3", "range[0, 4]"], "29": ["Number of DL BWP", "UINT32", "1", "1717", "3", "range[1, 4]"], "30": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1720", "96", ""], "31": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1816", "96", ""], "32": ["TRS Config", "NL1_TRS_Config_V1", "8", "1912", "256", ""], "33": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2168", "32", "PCCH Config in idle mode"], "34": ["UE Power Class", "UINT32", "1", "2200", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "35": ["UL Point A NARFCN", "UINT32", "1", "2203", "22", "Uplink NR-ARFCN of Point A"], "36": ["Reference Subcarrier Spacing", "UINT32", "1", "2225", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "37": ["Reserved", "UINT32", "1", "2228", "4", ""], "38": ["UL Center Frequency", "UINT32", "1", "2232", "32", "Unit: 5khz"], "39": ["DL Center Frequency", "UINT32", "1", "2264", "32", "Unit: 5khz"], "40": ["Gap Config", "NL1_Gap_Config_V1", "1", "2296", "32", ""], "41": ["SUL Config", "NL1_SUL_Config_V2", "1", "2328", "704", ""], "42": ["Scell Config", "NL1_Scell_Config_V10", "N", "3032", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V22": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V22", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261]"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "range[0, 261]"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", ""], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", ""], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", ""], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", ""], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", ""], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", ""], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", ""], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", ""], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", ""], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", ""], "24": ["Cell Group Type", "UINT32", "1", "1816", "1", "Enum{0:MCG, 1:SCG}"], "25": ["UL Carrier Bandwidth", "UINT32", "1", "1817", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "26": ["DL Carrier Bandwidth", "UINT32", "1", "1821", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "27": ["Reserved", "UINT32", "1", "1825", "17", ""], "28": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "29": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "30": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "1848", "96", ""], "31": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1944", "96", ""], "32": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", ""], "33": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "34": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "35": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "36": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "37": ["Reserved", "UINT32", "1", "2356", "4", ""], "38": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "39": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "40": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", ""], "41": ["SUL Config", "NL1_SUL_Config_V5", "1", "2456", "704", ""], "42": ["Scell Config", "NL1_Scell_Config_V11", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_Gap_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Gap Valid", "UINT32", "1", "0", "1", "0: Gap is not configured,\n1: Gap is configured and the following parameters are valid\nEnum{0:not valid, 1:valid}"], "1": ["Gap Period", "UINT32", "1", "1", "2", "range[0, 3], Enum{0:20ms, 1:40ms, 2:80ms, 3:160ms}"], "2": ["Gap Length", "UINT32", "1", "3", "3", "range[0, 5], Enum{0:1_5ms,1:3ms,2:3_5ms,3:4ms,4:5_5ms,5:6ms}"], "3": ["Gap Offset", "UINT32", "1", "6", "8", "range[0, 159]"], "4": ["Reserved", "UINT32", "1", "14", "18", ""]}, "Name": "NL1_Gap_Config_V1"}, "NL1_Scell_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "7", "range[1, 89]"], "3": ["Cell Index", "UINT32", "1", "39", "4", "range[1, 9]"], "4": ["Reserved", "UINT32", "1", "43", "21", ""], "5": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "6": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "7": ["UL Frequency Band", "UINT32", "1", "214", "7", "range[1, 89]"], "8": ["Reserved", "UINT32", "1", "221", "3", ""], "9": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", ""], "10": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "256", "32", ""], "11": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "288", "128", ""], "12": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "416", "128", ""], "13": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "544", "32", ""], "14": ["Active UL BWP Config", "NL1_BWP_Config_V2", "1", "576", "96", ""], "15": ["Active DL BWP Config", "NL1_BWP_Config_V2", "1", "672", "96", ""]}, "Name": "NL1_Scell_Config_V1"}, "NL1_Scell_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "7", "range[1, 89]"], "3": ["Cell Index", "UINT32", "1", "39", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "43", "2", "range[1, 2]"], "5": ["Reserved", "UINT32", "1", "45", "19", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "8": ["UL Frequency Band", "UINT32", "1", "214", "7", "range[1, 89]"], "9": ["Cell Type", "UINT32", "1", "221", "1", "Enum{0: DL+UL, 1: Only DL}"], "10": ["Reserved", "UINT32", "1", "222", "2", ""], "11": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", ""], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "15": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "800", "32", ""], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "832", "96", ""], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "928", "96", ""], "18": ["UL Center Frequency", "UINT32", "1", "1024", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1056", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1088", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1110", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1120", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1142", "10", ""]}, "Name": "NL1_Scell_Config_V2"}, "NL1_Scell_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "8", ""], "3": ["Cell Index", "UINT32", "1", "40", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "44", "2", "range[1, 2]"], "5": ["Reserved", "UINT32", "1", "46", "18", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "8": ["UL Frequency Band", "UINT32", "1", "214", "8", ""], "9": ["Cell Type", "UINT32", "1", "222", "1", "Enum{0: DL+UL, 1: Only DL}"], "10": ["Reserved", "UINT32", "1", "223", "1", ""], "11": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", ""], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "15": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "800", "32", ""], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "832", "96", ""], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "928", "96", ""], "18": ["UL Center Frequency", "UINT32", "1", "1024", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1056", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1088", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1110", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1120", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1142", "10", ""]}, "Name": "NL1_Scell_Config_V3"}, "NL1_Scell_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", ""], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "2", "range[1, 2]"], "5": ["Reserved", "UINT32", "1", "47", "17", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "7": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "8": ["UL Frequency Band", "UINT32", "1", "214", "9", ""], "9": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "10": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "224", "32", ""], "11": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "12": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "13": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "14": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", ""], "15": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", ""], "16": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", ""], "17": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "18": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "19": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "20": ["Reserved", "UINT32", "1", "1238", "10", ""], "21": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "22": ["Reserved", "UINT32", "1", "1270", "10", ""]}, "Name": "NL1_Scell_Config_V4"}, "NL1_Scell_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", ""], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "2", "range[1, 2]"], "5": ["CP Type", "UINT32", "1", "47", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "48", "16", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", ""], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "224", "32", ""], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", ""], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", ""], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", ""], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", ""], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1568", "384", ""]}, "Name": "NL1_Scell_Config_V5"}, "NL1_Scell_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", ""], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", ""], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "224", "32", ""], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", ""], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", ""], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", ""], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", ""], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1568", "384", ""]}, "Name": "NL1_Scell_Config_V6"}, "NL1_Scell_Config_V7": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", ""], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", ""], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", ""], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", ""], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", ""], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", ""], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", ""], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1568", "384", ""]}, "Name": "NL1_Scell_Config_V7"}, "NL1_Scell_Config_V8": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", ""], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", ""], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", ""], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", ""], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", ""], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", ""], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", ""], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1568", "384", ""]}, "Name": "NL1_Scell_Config_V8"}, "NL1_Scell_Config_V9": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", ""], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", ""], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", ""], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", ""], "16": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "960", "96", ""], "17": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1056", "96", ""], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", ""], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1568", "384", ""]}, "Name": "NL1_Scell_Config_V9"}, "NL1_Scell_Config_V10": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "8", ""], "3": ["Cell Index", "UINT32", "1", "40", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "44", "2", "range[1, 2]"], "5": ["UL Carrier Bandwidth", "UINT32", "1", "46", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "6": ["DL Carrier Bandwidth", "UINT32", "1", "50", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "7": ["Reserved", "UINT32", "1", "54", "10", ""], "8": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "9": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "10": ["UL Frequency Band", "UINT32", "1", "214", "8", ""], "11": ["Cell Type", "UINT32", "1", "222", "1", "Enum{0: DL+UL, 1: Only DL}"], "12": ["Reserved", "UINT32", "1", "223", "1", ""], "13": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", ""], "14": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "15": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "16": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "17": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "800", "32", ""], "18": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "832", "96", ""], "19": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "928", "96", ""], "20": ["UL Center Frequency", "UINT32", "1", "1024", "32", "Unit: 5khz"], "21": ["DL Center Frequency", "UINT32", "1", "1056", "32", "Unit: 5khz"], "22": ["DL Point A NARFCN", "UINT32", "1", "1088", "22", "Downlink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1110", "10", ""], "24": ["UL Point A NARFCN", "UINT32", "1", "1120", "22", "Uplink NR-ARFCN of Point A"], "25": ["Reserved", "UINT32", "1", "1142", "10", ""]}, "Name": "NL1_Scell_Config_V10"}, "NL1_Scell_Config_V11": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", ""], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["UL Carrier Bandwidth", "UINT32", "1", "49", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "7": ["DL Carrier Bandwidth", "UINT32", "1", "53", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "8": ["Reserved", "UINT32", "1", "57", "7", ""], "9": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", ""], "10": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "11": ["UL Frequency Band", "UINT32", "1", "214", "9", ""], "12": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "13": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", ""], "14": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", ""], "15": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", ""], "16": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", ""], "17": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", ""], "18": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "960", "96", ""], "19": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1056", "96", ""], "20": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "21": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "22": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1238", "10", ""], "24": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "25": ["Reserved", "UINT32", "1", "1270", "6", ""], "26": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "27": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "28": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", ""], "29": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1568", "384", ""]}, "Name": "NL1_Scell_Config_V11"}, "NL1_SUL_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", ""], "3": ["Reserved", "UINT32", "1", "31", "1", ""]}, "Name": "NL1_SUL_Config_V1"}, "NL1_SUL_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", ""], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", ""], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", ""], "6": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "288", "32", ""], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", ""], "8": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "608", "96", ""]}, "Name": "NL1_SUL_Config_V2"}, "NL1_SUL_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", ""], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", ""], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", ""], "6": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "288", "32", ""], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", ""], "8": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "608", "96", ""]}, "Name": "NL1_SUL_Config_V3"}, "NL1_SUL_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", ""], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", ""], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", ""], "6": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "288", "32", ""], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", ""], "8": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "608", "96", ""]}, "Name": "NL1_SUL_Config_V4"}, "NL1_SUL_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", ""], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", ""], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", ""], "6": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "288", "32", ""], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", ""], "8": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "608", "96", ""]}, "Name": "NL1_SUL_Config_V5"}, "NL1_TDD_UL_DL_Pattern_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Transmission Period", "UINT32", "1", "1", "4", "Enum{0: 0_5ms, 1: 0_625ms, 2: 1msB, 3: 1_25ms, 4: 2ms,\n5: 2_5ms, 6: 3ms, 7: 4ms, 8: 5ms, 9: 10ms}"], "2": ["Number of DL slot", "UINT32", "1", "5", "9", "range[0, 320]"], "3": ["Number of UL slot", "UINT32", "1", "14", "9", "range[0, 320]"], "4": ["Number of DL symbol", "UINT32", "1", "23", "4", "range[0, 14]"], "5": ["Number of UL symbol", "UINT32", "1", "27", "4", "range[0, 14]"], "6": ["Reserved", "UINT32", "1", "31", "1", ""], "7": ["Guard Period", "UINT32", "1", "32", "4", "range[0, 10]"], "8": ["Reserved", "UINT32", "1", "36", "28", ""]}, "Name": "NL1_TDD_UL_DL_Pattern_V1"}, "NL1_RACH_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["PRACH Configuration Index", "UINT32", "1", "0", "8", "range[0, 255]"], "1": ["Root Sequence Index", "UINT32", "1", "8", "10", "range[0, 837]"], "2": ["Total Number of Preambles", "UINT32", "1", "18", "6", "range[1, 63]"], "3": ["SSB RO Config Valid", "UINT32", "1", "24", "1", "Enum{0: Invalid, 1: Valid}"], "4": ["SSB Per RO", "UINT32", "1", "25", "3", "Enum{0: 1/8, 1: 1/4, 2: 1/2, 3: 1, 4: 2, 5: 4, 6: 8, 7: 16}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["CB Preambles Per SSB", "UINT32", "1", "32", "6", "range[1, 63]"], "7": ["MSG1 SCS", "UINT32", "1", "38", "3", "Enum{0:15KHz,1:30KHz,2:60KHz,3:120KHz,4:240KHz,5:Invalid}"], "8": ["Reserved", "UINT32", "1", "41", "23", ""], "9": ["Preamble Target Power", "INT16", "1", "64", "16", ""], "10": ["SSB RSRP Threshold", "INT16", "1", "80", "16", ""]}, "Name": "NL1_RACH_Config_V1"}, "NL1_RACH_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["PRACH Configuration Index", "UINT32", "1", "0", "8", "range[0, 255]"], "1": ["Root Sequence Index", "UINT32", "1", "8", "10", "range[0, 837]"], "2": ["Total Number of Preambles", "UINT32", "1", "18", "6", "range[1, 63]"], "3": ["SSB RO Config Valid", "UINT32", "1", "24", "1", "Enum{0: Invalid, 1: Valid}"], "4": ["SSB Per RO", "UINT32", "1", "25", "3", "Enum{0: 1/8, 1: 1/4, 2: 1/2, 3: 1, 4: 2, 5: 4, 6: 8, 7: 16}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["CB Preambles Per SSB", "UINT32", "1", "32", "6", "range[1, 63]"], "7": ["MSG1 SCS", "UINT32", "1", "38", "3", "Enum{0:15KHz,1:30KHz,2:60KHz,3:120KHz,4:240KHz,5:Invalid}"], "8": ["Reserved", "UINT32", "1", "41", "23", ""], "9": ["Preamble Target Power", "INT16", "1", "64", "16", ""], "10": ["SSB RSRP Threshold", "INT16", "1", "80", "16", ""], "11": ["SUL RSRP Threshold", "INT16", "1", "96", "16", "0 means invalid"], "12": ["Reserved", "INT16", "1", "112", "16", ""]}, "Name": "NL1_RACH_Config_V2"}, "NL1_PUSCH_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Hopping", "UINT32", "1", "0", "2", "Enum{0: not configured, 1: intra, 2: inter}"], "1": ["Tx Config Type", "UINT32", "1", "2", "1", "Enum{0: Codebook, 1: Non-codebook}"], "2": ["Resource Allocation", "UINT32", "1", "3", "1", "Enum{0: Type 0, 1: Type 1}"], "3": ["Max MCS", "UINT32", "1", "4", "1", "Enum{0: 64QAM, 1: 256QAM}"], "4": ["Max Rank", "UINT32", "1", "5", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "5": ["RBG Size", "UINT32", "1", "7", "1", "Enum{0: Config 1, 1: Config 2}"], "6": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "8", "2", "range[0, 3]"], "7": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "10", "2", "range[0, 3]"], "8": ["Reserved", "UINT32", "1", "12", "20", ""]}, "Name": "NL1_PUSCH_Config_V3"}, "NL1_PUSCH_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Hopping", "UINT32", "1", "0", "2", "Enum{0: not configured, 1: intra, 2: inter}"], "1": ["Tx Config Type", "UINT32", "1", "2", "1", "Enum{0: Codebook, 1: Non-codebook}"], "2": ["Resource Allocation", "UINT32", "1", "3", "1", "Enum{0: Type 0, 1: Type 1}"], "3": ["Max MCS", "UINT32", "1", "4", "1", "Enum{0: 64QAM, 1: 256QAM}"], "4": ["Max Rank", "UINT32", "1", "5", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "5": ["RBG Size", "UINT32", "1", "7", "1", "Enum{0: Config 1, 1: Config 2}"], "6": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "8", "2", "range[0, 3]"], "7": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "10", "2", "range[0, 3]"], "8": ["PTRS Config Valid", "UINT32", "1", "12", "1", ""], "9": ["Reserved", "UINT32", "1", "13", "19", ""]}, "Name": "NL1_PUSCH_Config_V4"}, "NL1_PUSCH_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Hopping", "UINT32", "1", "0", "2", "Enum{0: not configured, 1: intra, 2: inter}"], "1": ["Tx Config Type", "UINT32", "1", "2", "1", "Enum{0: Codebook, 1: Non-codebook}"], "2": ["Resource Allocation", "UINT32", "1", "3", "1", "Enum{0: Type 0, 1: Type 1}"], "3": ["Max MCS", "UINT32", "1", "4", "1", "Enum{0: 64QAM, 1: 256QAM}"], "4": ["Max Rank", "UINT32", "1", "5", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "5": ["RBG Size", "UINT32", "1", "7", "1", "Enum{0: Config 1, 1: Config 2}"], "6": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "8", "2", "range[0, 3]"], "7": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "10", "2", "range[0, 3]"], "8": ["PTRS Config Valid", "UINT32", "1", "12", "1", ""], "9": ["Transform Precoder", "UINT32", "1", "13", "1", "range[0, 1], Enum{0: Disabled, 1: Enabled}"], "10": ["Reserved", "UINT32", "1", "14", "18", ""]}, "Name": "NL1_PUSCH_Config_V5"}, "NL1_PUCCH_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Group Hopping", "UINT32", "1", "0", "1", "Enum{0: Disabled, 1: Enabled}"], "1": ["Sequence Hopping", "UINT32", "1", "1", "1", "Enum{0: Disabled, 1: Enabled}"], "2": ["Inter Slot Frequency Hopping", "UINT32", "1", "2", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "3": ["Additional DMRS", "UINT32", "1", "6", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "4": ["Reserved", "UINT32", "1", "10", "22", ""]}, "Name": "NL1_PUCCH_Config_V1"}, "NL1_PUCCH_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Group Hopping", "UINT32", "1", "0", "1", "Enum{0: Disabled, 1: Enabled}"], "1": ["Sequence Hopping", "UINT32", "1", "1", "1", "Enum{0: Disabled, 1: Enabled}"], "2": ["Inter Slot Frequency Hopping", "UINT32", "1", "2", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "3": ["Additional DMRS", "UINT32", "1", "6", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "4": ["Reserved", "UINT32", "1", "10", "22", ""], "5": ["SR Resource Config", "NL1_SR_Resource_Config_V1", "8", "32", "256", ""]}, "Name": "NL1_PUCCH_Config_V2"}, "NL1_PUCCH_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Vaid", "UINT32", "1", "0", "1", "Enum{0: Invalid config, 1: Valid config}"], "1": ["Group Hopping", "UINT32", "1", "1", "1", "Enum{0: Disabled, 1: Enabled}"], "2": ["Sequence Hopping", "UINT32", "1", "2", "1", "Enum{0: Disabled, 1: Enabled}"], "3": ["Inter Slot Frequency Hopping", "UINT32", "1", "3", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "4": ["Additional DMRS", "UINT32", "1", "7", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "5": ["Reserved", "UINT32", "1", "11", "21", ""], "6": ["SR Resource Config", "NL1_SR_Resource_Config_V1", "8", "32", "256", ""]}, "Name": "NL1_PUCCH_Config_V3"}, "NL1_SR_Resource_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Vaid", "UINT32", "1", "0", "1", "Enum{0: Invalid config, 1: Valid config}"], "1": ["Resource Id", "UINT32", "1", "1", "3", "range[0, 7]"], "2": ["SR Id", "UINT32", "1", "4", "3", "range[0, 7]"], "3": ["Periodicity as Symbols", "UINT32", "1", "7", "1", "0: The unit of periodicity is slots, 1: The unit of\nperiodicity is symbols\nEnum{0:Period unit is slots,1:Period unit is symbols}"], "4": ["Periodicity", "UINT32", "1", "8", "10", "range[1, 640]"], "5": ["Offset", "UINT32", "1", "18", "10", "range[0, 639]"], "6": ["Reserved", "UINT32", "1", "28", "4", ""]}, "Name": "NL1_SR_Resource_Config_V1"}, "NL1_PDCCH_Search_Space_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Search Space", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Search Space ID", "UINT32", "1", "1", "6", "range[0, 39]"], "2": ["Slot Periodicity", "UINT32", "1", "7", "4", "Enum{0: 1 slot, 1: 2 slots, 2: 4 slots, 3: 5 slots, 4: 8 slots, 5: 10 slots, 6: 16 slots, 7: 20 slots,\n8: 40 slots,9: 80 slots,10: 160 slots,11: 320 slots,12: 640 slots,13: 1280 slots,14: 2560 slots}"], "3": ["Slot Offset", "UINT32", "1", "11", "12", "range[0, 2559]"], "4": ["Reserved", "UINT32", "1", "23", "9", ""], "5": ["Duration", "UINT32", "1", "32", "12", "range[2, 2559]"], "6": ["Monitoring Symbols", "UINT32", "1", "44", "14", "bit 0 means symbol 0, bit 1 means symbol 1, and so on."], "7": ["Monitoring 0_0 and 1_0", "UINT32", "1", "58", "1", "Enum{0: False, 1: True}"], "8": ["Monitoring 0_1 and 1_1", "UINT32", "1", "59", "1", "Enum{0: False, 1: True}"], "9": ["Monitoring 2_0", "UINT32", "1", "60", "1", "Enum{0: False, 1: True}"], "10": ["Monitoring 2_1", "UINT32", "1", "61", "1", "Enum{0: False, 1: True}"], "11": ["Monitoring 2_2", "UINT32", "1", "62", "1", "Enum{0: False, 1: True}"], "12": ["Monitoring 2_3", "UINT32", "1", "63", "1", "Enum{0: False, 1: True}"]}, "Name": "NL1_PDCCH_Search_Space_Config_V1"}, "NL1_PDSCH_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Allocation", "UINT32", "1", "0", "2", "Enum{0: Type 0, 1: Type 1, 2: Dynamic switch}"], "1": ["RBG Size", "UINT32", "1", "2", "1", "Enum{0: Config 1, 1: Config 2}"], "2": ["Max MCS", "UINT32", "1", "3", "1", "Enum{0: 64QAM, 1: 256QAM}"], "3": ["Max Rank", "UINT32", "1", "4", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "4": ["PRB Bundling Type", "UINT32", "1", "6", "1", "Enum{0: Static, 1: Dynamic}"], "5": ["PRB Bundling Size", "UINT32", "1", "7", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "6": ["PRB Bundling Size Set 1", "UINT32", "1", "10", "3", "Enum{0: N2, 1: N4, 2: Wideband,3: N2 wideband, 4: N4 wideband}"], "7": ["PRB Bundling Size Set 2", "UINT32", "1", "13", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "8": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "16", "2", "range[0, 3]"], "9": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "18", "2", "range[0, 3]"], "10": ["QCL Source", "UINT32", "1", "20", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "11": ["QCL Source ID", "UINT32", "1", "22", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "12": ["QCL Type", "UINT32", "1", "29", "2", "Valid only when QCL Source is valid.\nEnum{0: Type A, 1: Type B, 2: Type C, 3: Type D}"], "13": ["Reserved", "UINT32", "1", "31", "1", ""]}, "Name": "NL1_PDSCH_Config_V4"}, "NL1_PDSCH_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Allocation", "UINT32", "1", "0", "2", "Enum{0: Type 0, 1: Type 1, 2: Dynamic switch}"], "1": ["RBG Size", "UINT32", "1", "2", "1", "Enum{0: Config 1, 1: Config 2}"], "2": ["Max MCS", "UINT32", "1", "3", "1", "Enum{0: 64QAM, 1: 256QAM}"], "3": ["Max Rank", "UINT32", "1", "4", "3", "Enum{0 : Rank 1, 1 : Rank 2, 2 : Rank 3, 3 : Rank 4,\n4 : Rank 5, 5 : Rank 6, 6 : Rank 7, 7 : Rank 8}"], "4": ["PRB Bundling Type", "UINT32", "1", "7", "1", "Enum{0: Static, 1: Dynamic}"], "5": ["PRB Bundling Size", "UINT32", "1", "8", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "6": ["PRB Bundling Size Set 1", "UINT32", "1", "11", "3", "Enum{0: N2, 1: N4, 2: Wideband, 3:N2 wideband, 4: N4 wideband}"], "7": ["PRB Bundling Size Set 2", "UINT32", "1", "14", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "8": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "17", "2", "range[0, 3]"], "9": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "19", "2", "range[0, 3]"], "10": ["QCL Source", "UINT32", "1", "21", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "11": ["QCL Source ID", "UINT32", "1", "23", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "12": ["QCL Type", "UINT32", "1", "30", "2", "Valid only when QCL Source is valid.\nEnum{0: Type A, 1: Type B, 2: Type C, 3: Type D}"]}, "Name": "NL1_PDSCH_Config_V5"}, "NL1_PDSCH_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Allocation", "UINT32", "1", "0", "2", "Enum{0: Type 0, 1: Type 1, 2: Dynamic switch}"], "1": ["RBG Size", "UINT32", "1", "2", "1", "Enum{0: Config 1, 1: Config 2}"], "2": ["Max MCS", "UINT32", "1", "3", "1", "Enum{0: 64QAM, 1: 256QAM}"], "3": ["Max Rank", "UINT32", "1", "4", "3", "Enum{0 : Rank 1, 1 : Rank 2, 2 : Rank 3, 3 : Rank 4,\n4 : Rank 5, 5 : Rank 6, 6 : Rank 7, 7 : Rank 8}"], "4": ["PRB Bundling Type", "UINT32", "1", "7", "1", "Enum{0: Static, 1: Dynamic}"], "5": ["PRB Bundling Size", "UINT32", "1", "8", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "6": ["PRB Bundling Size Set 1", "UINT32", "1", "11", "3", "Enum{0: N2, 1: N4, 2: Wideband, 3: N2 wideband, 4:N4 wideband}"], "7": ["PRB Bundling Size Set 2", "UINT32", "1", "14", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "8": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "17", "2", "range[0, 3]"], "9": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "19", "2", "range[0, 3]"], "10": ["QCL Source", "UINT32", "1", "21", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "11": ["QCL Source ID", "UINT32", "1", "23", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "12": ["QCL Type", "UINT32", "1", "30", "2", "Valid only when QCL Source is valid.\nEnum{0: Type A, 1: Type B, 2: Type C, 3: Type D}"], "13": ["Reserved", "UINT32", "1", "32", "31", ""], "14": ["PTRS Config Valid", "UINT32", "1", "63", "1", ""], "15": ["PTRS Config", "NL1_PDSCH_PTRS_Config_V1", "1", "64", "96", "Valid if PTRS Config Valid=1"]}, "Name": "NL1_PDSCH_Config_V6"}, "NL1_PDSCH_PTRS_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Density Valid", "UINT32", "1", "0", "1", ""], "1": ["Time Density Valid", "UINT32", "1", "1", "1", ""], "2": ["Epre Ratio", "UINT32", "1", "2", "2", "range[0, 3]"], "3": ["Resource Element Offset", "UINT32", "1", "4", "2", "Enum{0: Offset00, 1: Offset01, 2: Offset10, 3: Offset11}"], "4": ["Reserved", "UINT32", "1", "6", "26", ""], "5": ["Frequency Density", "UINT16", "2", "32", "32", "range[1, 276], valid only if Frequency Density Valid=1"], "6": ["Time Density", "UINT8", "3", "64", "24", "range[0, 29], valid only if Time Density Valid=1"], "7": ["Reserved", "UINT8", "1", "88", "8", ""]}, "Name": "NL1_PDSCH_PTRS_Config_V1"}, "NL1_SRS_Resource_Set_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Set Id", "UINT16", "1", "0", "4", "range[0, 15]"], "1": ["Usage", "UINT16", "1", "4", "2", "Enum{0: beam management, 1: codebook, 2: non-codebook,\n3: antenna switching}"], "2": ["alpha", "UINT16", "1", "6", "3", "Enum{0:0,1: 0_4, 2: 0_5, 3: 0_6, 4: 0_7, 5: 0_8, 6: 0_9, 7: 1}"], "3": ["Reserved", "UINT16", "1", "9", "7", ""], "4": ["p0", "INT16", "1", "16", "16", "range[-202, 24]"], "5": ["SRS Resources", "NL1_SRS_Resource_Config_V2", "4", "32", "256", ""]}, "Name": "NL1_SRS_Resource_Set_Config_V2"}, "NL1_SRS_Resource_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Resource Id", "UINT32", "1", "1", "6", "range[0, 63]"], "2": ["Resource Type", "UINT32", "1", "7", "2", "Enum{0: aperiodic, 1: semi-persistent, 2: periodic}"], "3": ["Number of SRS Ports", "UINT32", "1", "9", "3", "range[1, 4]"], "4": ["Number of Symbols", "UINT32", "1", "12", "3", "range[1, 4]"], "5": ["Frequency Domain Position", "UINT32", "1", "15", "7", "range[0, 67]"], "6": ["Frequency Domain Shift", "UINT32", "1", "22", "9", "range[0, 268]"], "7": ["Reserved", "UINT32", "1", "31", "1", ""], "8": ["Periodicity", "UINT32", "1", "32", "12", "range[1, 2560]"], "9": ["Offset", "UINT32", "1", "44", "12", "range[0, 2559]"], "10": ["Frequency Hopping", "UINT32", "1", "56", "2", "Enum{0: disabled, 1: enabled}"], "11": ["Reserved", "UINT32", "1", "58", "6", ""]}, "Name": "NL1_SRS_Resource_Config_V2"}, "NL1_NZP_CSI_RS_Resource_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Config", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Resource Id", "UINT32", "1", "1", "8", "range[0, 191]"], "2": ["Periodicity Offset Valid", "UINT32", "1", "9", "1", "Enum{0: False, 1: True}"], "3": ["Periodicity", "UINT32", "1", "10", "10", "range[4, 640]"], "4": ["Offset", "UINT32", "1", "20", "10", "range[0, 639]"], "5": ["Reserved", "UINT32", "1", "30", "2", ""]}, "Name": "NL1_NZP_CSI_RS_Resource_V1"}, "NL1_CSI_Report_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Config", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Report Config Id", "UINT32", "1", "1", "6", "range[0, 47]"], "2": ["Serving Cell Index", "UINT32", "1", "7", "5", "range[0, 31]"], "3": ["Report Config Type", "UINT32", "1", "12", "2", "Enum{0: Periodic,1: Semi-persistent on PUCCH,\n2: Semi-persistent on PUSCH, 3: Aperiodic}"], "4": ["Report Periodicity", "UINT32", "1", "14", "9", "range[4, 320]. Valid only when Report Config Type is periodic\nor semi-persistent."], "5": ["Report Quantity", "UINT32", "1", "23", "3", "Enum{0: None,1: CRI_RI_PMI_CQI, 2: RI_I1,3: RI_I1_CQI,\n4:CRI_RI_CQI,5:CRI_RSRP,6:SSB Index RSRP,7:CRI_RI_LI_PMI_CQ}"], "6": ["CQI Reporting Granularity", "UINT32", "1", "26", "1", "Enum{0: wideband, 1: subband}"], "7": ["PMI Reporting Granularity", "UINT32", "1", "27", "1", "Enum{0: wideband, 1: subband}"], "8": ["Reserved", "UINT32", "1", "28", "4", ""], "9": ["Number of Subbands", "UINT32", "1", "32", "5", "range[3, 19]"], "10": ["Subband Size", "UINT32", "1", "37", "6", "4 or 8 or 16 or 32"], "11": ["Codebook Config", "UINT32", "1", "43", "2", "Enum{0: Type I Single Panel, 1:Type I Multi Panel,2: Type II,\n3: Type II Port Selection}"], "12": ["Reserved", "UINT32", "1", "45", "19", ""], "13": ["NZP CSI RS Resource", "NL1_NZP_CSI_RS_Resource_V2", "1", "64", "32", ""]}, "Name": "NL1_CSI_Report_Config_V2"}, "NL1_CSI_Report_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Config", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Report Config Id", "UINT32", "1", "1", "6", "range[0, 47]"], "2": ["Serving Cell Index", "UINT32", "1", "7", "5", "range[0, 31]"], "3": ["Report Config Type", "UINT32", "1", "12", "2", "Enum{0: Periodic,1: Semi-persistent on PUCCH,\n2: Semi-persistent on PUSCH, 3: Aperiodic}"], "4": ["Report Periodicity", "UINT32", "1", "14", "9", "range[4, 320]. Valid only when Report Config Type is periodic\nor semi-persistent."], "5": ["Report Quantity", "UINT32", "1", "23", "3", "Enum{0: None,1: CRI_RI_PMI_CQI, 2: RI_I1,3: RI_I1_CQI,\n4:CRI_RI_CQI,5:CRI_RSRP,6:SSB Index RSRP,7:CRI_RI_LI_PMI_CQ}"], "6": ["CQI Reporting Granularity", "UINT32", "1", "26", "1", "Enum{0: wideband, 1: subband}"], "7": ["PMI Reporting Granularity", "UINT32", "1", "27", "1", "Enum{0: wideband, 1: subband}"], "8": ["CQI Table Valid", "UINT32", "1", "28", "1", "Enum{0: Invalid, 1: Valid}"], "9": ["CQI Table Index", "UINT32", "1", "29", "2", "Range[1,3]"], "10": ["Reserved", "UINT32", "1", "31", "1", ""], "11": ["Number of Subbands", "UINT32", "1", "32", "5", "range[3, 19]"], "12": ["Subband Size", "UINT32", "1", "37", "6", "4 or 8 or 16 or 32"], "13": ["Codebook Config", "UINT32", "1", "43", "2", "Enum{0: Type I Single Panel, 1:Type I Multi Panel,2: Type II,\n3: Type II Port Selection}"], "14": ["Reserved", "UINT32", "1", "45", "19", ""], "15": ["NZP CSI RS Resource", "NL1_NZP_CSI_RS_Resource_V2", "1", "64", "32", ""]}, "Name": "NL1_CSI_Report_Config_V3"}, "NL1_NZP_CSI_RS_Resource_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Periodicity Offset Valid", "UINT32", "1", "0", "1", "Enum{0: False, 1: True}"], "1": ["Periodicity", "UINT32", "1", "1", "10", "range[4, 640]"], "2": ["Offset", "UINT32", "1", "11", "10", "range[0, 639]"], "3": ["Number of Ports", "UINT32", "1", "21", "6", "range[1, 32]"], "4": ["Reserved", "UINT32", "1", "27", "5", ""]}, "Name": "NL1_NZP_CSI_RS_Resource_V2"}, "NL1_Antenna_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Transmission Mode", "UINT32", "1", "0", "4", "range[1, 10]"], "1": ["Tx Antenna Selection", "UINT32", "1", "4", "2", "Enum{0: Disabled, 1: Closed loop, 2: Open loop}"], "2": ["Reserved", "UINT32", "1", "6", "26", ""]}, "Name": "NL1_Antenna_Config_V1"}, "NL1_BWP_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]"], "1": ["BWP start", "UINT32", "1", "3", "9", ""], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Reserved", "UINT32", "1", "24", "8", ""], "5": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"]}, "Name": "NL1_BWP_Config_V1"}, "NL1_BWP_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]"], "1": ["BWP start", "UINT32", "1", "3", "9", ""], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Reserved", "UINT32", "1", "24", "8", ""], "5": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"], "6": ["locationAndBandwidth", "UINT32", "1", "64", "16", "range[0, 37949]"], "7": ["Reserved", "UINT32", "1", "80", "16", ""]}, "Name": "NL1_BWP_Config_V2"}, "NL1_BWP_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]"], "1": ["BWP start", "UINT32", "1", "3", "9", ""], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Bandwidth", "UINT32", "1", "24", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"], "7": ["locationAndBandwidth", "UINT32", "1", "64", "16", "range[0, 37949]"], "8": ["Reserved", "UINT32", "1", "80", "16", ""]}, "Name": "NL1_BWP_Config_V3"}, "NL1_BWP_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]"], "1": ["BWP start", "UINT32", "1", "3", "9", ""], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Bandwidth", "UINT32", "1", "24", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"], "7": ["locationAndBandwidth", "UINT32", "1", "64", "16", "range[0, 37949]"], "8": ["Reserved", "UINT32", "1", "80", "16", ""]}, "Name": "NL1_BWP_Config_V4"}, "NL1_TRS_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Periodicity", "UINT32", "1", "0", "10", "range[4, 640]"], "1": ["PRB Number", "UINT32", "1", "10", "9", "range[0, 273]"], "2": ["QCL Source", "UINT32", "1", "19", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "3": ["QCL Source ID", "UINT32", "1", "21", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "4": ["QCL Type", "UINT32", "1", "28", "2", "Valid only when QCL Source is valid.\nEnum{ 0: Type A, 1: Type B, 2: Type C, 3: Type D}"], "5": ["Reserved", "UINT32", "1", "30", "2", ""]}, "Name": "NL1_TRS_Config_V1"}, "NL1_PCCH_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["PCCH Config Idle Valid", "UINT32", "1", "0", "1", "Enum{0: invalid, 1: valid}, valid once UE enters idle mode"], "1": ["Default Paging Cycle", "UINT32", "1", "1", "9", "range[32, 256]"], "2": ["N", "UINT32", "1", "10", "3", "Enum{0: 1T, 1: T/2, 2: T/4, 3: T/8, 4: T/16}"], "3": ["Paging Offset", "UINT32", "1", "13", "4", "range[0, 15]"], "4": ["Ns", "UINT32", "1", "17", "3", "range[1, 4]"], "5": ["User Specific Paging Cycle", "UINT32", "1", "20", "9", "range[32, 256]"], "6": ["Reserved", "UINT32", "1", "29", "3", ""]}, "Name": "NL1_PCCH_Config_V1"}}},
+"NL1_Physical_Configuration": {"info": {"Category": "NR", "Layer": "L1", "Code": "0x9014", "Name": "NL1_Physical_Configuration", "Type": "RECORD", "Desc": "This log packet contains the important parameters of physical channel configuration. The log is generated every 1000ms or once when the parameters are updated.\n"}, "table": {"NL1_Physical_Configuration": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Version", "UINT32", "1", "0", "8", "Actual version of this log record"], "1": ["Versions", "NL1_PHY_Config_Versions", "1", "8", "VAR", "Available versions of this log record.\nThe value of above \"Version\" field\ndetermines the corresponding structure\ndefined in below structure tables."]}, "Name": "NL1_Physical_Configuration"}, "NL1_PHY_Config_Versions": {"ColNum": 3, "Header": ["Version", "Type Name", "Description"], "Data": {"0": ["6", "NL1_PHY_Config_V6", "Information of PHY Config (version 6)"], "1": ["7", "NL1_PHY_Config_V7", "Information of PHY Config (version 7)"], "2": ["8", "NL1_PHY_Config_V8", "Information of PHY Config (version 8)"], "3": ["9", "NL1_PHY_Config_V9", "Information of PHY Config (version 9)"], "4": ["10", "NL1_PHY_Config_V10", "Information of PHY Config (version 10)"], "5": ["11", "NL1_PHY_Config_V11", "Information of PHY Config (version 11)"], "6": ["12", "NL1_PHY_Config_V12", "Information of PHY Config (version 12)"], "7": ["13", "NL1_PHY_Config_V13", "Information of PHY Config (version 13)"], "8": ["14", "NL1_PHY_Config_V14", "Information of PHY Config (version 14)"], "9": ["15", "NL1_PHY_Config_V15", "Information of PHY Config (version 15)"], "10": ["16", "NL1_PHY_Config_V16", "Information of PHY Config (version 16)"], "11": ["17", "NL1_PHY_Config_V17", "Information of PHY Config (version 17)"], "12": ["18", "NL1_PHY_Config_V18", "Information of PHY Config (version 18)"], "13": ["19", "NL1_PHY_Config_V19", "Information of PHY Config (version 19)"], "14": ["20", "NL1_PHY_Config_V20", "Information of PHY Config (version 20)"], "15": ["21", "NL1_PHY_Config_V21", "Information of PHY Config (version 21)"], "16": ["22", "NL1_PHY_Config_V22", "Information of PHY Config (version 22)"], "17": ["23", "NL1_PHY_Config_V23", "Information of PHY Config (version 23)"], "18": ["24", "NL1_PHY_Config_V24", "Information of PHY Config (version 24)"], "19": ["25", "NL1_PHY_Config_V25", "Information of PHY Config (version 25)\nNL1_PHY_Config_V25 and NL1_Scell_Config_V14 are special versions\nbased on NL1_PHY_Config_V21 and NL1_Scell_Config_V10.\nFor customer requirement on NR15.R3.MD700.MP branch.\nNL1_PHY_Config_V24 and NL1_Scell_Config_V13 are normal versions."]}, "Name": "NL1_PHY_Config_Versions"}, "NL1_PHY_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["Carrier Index", "UINT32", "1", "46", "3", "range[0, 7]"], "5": ["DL Frequency Band", "UINT32", "1", "49", "7", "range[1, 89]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Reserved", "UINT32", "1", "213", "3", ""], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Cell Type", "UINT32", "1", "245", "1", "Enum{0: PCell, 1: SCell}"], "15": ["Reserved", "UINT32", "1", "246", "2", ""], "16": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", "Information of RACH configuration (version 1)"], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", "Information of PUSCH configuration (version 3)"], "18": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "376", "32", "Information of PUCCH configuration (version 1)"], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "408", "128", "CSS configuration"], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "536", "128", "USS configuration"], "21": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "664", "32", "Information of PDSCH configuration (version 4)"], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "696", "288", "Information of SRS resource set configuration (version 2)"], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "984", "384", "Information of CSI report configuration (version 2)"], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1368", "32", "Information of antenna configuration (version 1)"], "25": ["Active UL BWP Config", "NL1_BWP_Config_V1", "1", "1400", "64", "Configuration of active uplink BWP (version 1)"], "26": ["Active DL BWP Config", "NL1_BWP_Config_V1", "1", "1464", "64", "Configuration of active downlink BWP (version 1)"], "27": ["TRS Config", "NL1_TRS_Config_V1", "8", "1528", "256", "Configuration of tracking reference signal (version 1)"]}, "Name": "NL1_PHY_Config_V6"}, "NL1_PHY_Config_V7": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["Carrier Index", "UINT32", "1", "46", "3", "range[0, 7]"], "5": ["DL Frequency Band", "UINT32", "1", "49", "7", "range[1, 89]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Reserved", "UINT32", "1", "213", "3", ""], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Cell Type", "UINT32", "1", "245", "1", "Enum{0: PCell, 1: SCell}"], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", "Information of RACH configuration (version 1)"], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", "Information of PUSCH configuration (version 3)"], "19": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "376", "32", "Information of PUCCH configuration (version 1)"], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "408", "128", "CSS configuration"], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "536", "128", "USS configuration"], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "664", "32", "Information of PDSCH configuration (version 4)"], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "696", "288", "Information of SRS resource set configuration (version 2)"], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "984", "384", "Information of CSI report configuration (version 2)"], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1368", "32", "Information of antenna configuration (version 1)"], "26": ["Active UL BWP Config", "NL1_BWP_Config_V2", "1", "1400", "96", "Configuration of active uplink BWP (version 2)"], "27": ["Active DL BWP Config", "NL1_BWP_Config_V2", "1", "1496", "96", "Configuration of active downlink BWP (version 2)"], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1592", "256", "Configuration of tracking reference signal (version 1)"]}, "Name": "NL1_PHY_Config_V7"}, "NL1_PHY_Config_V8": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V8", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["Reserved", "UINT32", "1", "46", "3", ""], "5": ["DL Frequency Band", "UINT32", "1", "49", "7", "range[1, 89]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", "Information of RACH configuration (version 1)"], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", "Information of PUSCH configuration (version 3)"], "19": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "376", "32", "Information of PUCCH configuration (version 1)"], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "408", "128", "CSS configuration"], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "536", "128", "USS configuration"], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "664", "32", "Information of PDSCH configuration (version 4)"], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "696", "288", "Information of SRS resource set configuration (version 2)"], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "984", "384", "Information of CSI report configuration (version 2)"], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1368", "32", "Information of antenna configuration (version 1)"], "26": ["Active UL BWP Config", "NL1_BWP_Config_V2", "1", "1400", "96", "Configuration of active uplink BWP (version 2)"], "27": ["Active DL BWP Config", "NL1_BWP_Config_V2", "1", "1496", "96", "Configuration of active downlink BWP (version 2)"], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1592", "256", "Configuration of tracking reference signal (version 1)"], "29": ["Scell Config", "NL1_Scell_Config_V1", "N", "1848", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V9": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V9", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "7", "range[1, 89]"], "5": ["Reference Subcarrier Spacing", "UINT32", "1", "53", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", "Information of RACH configuration (version 1)"], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", "Information of PUSCH configuration (version 3)"], "19": ["PUCCH Config", "NL1_PUCCH_Config_V2", "1", "376", "288", "Information of PUCCH configuration (version 2)"], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "664", "128", "CSS configuration"], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "792", "128", "USS configuration"], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "920", "32", "Information of PDSCH configuration (version 4)"], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "952", "288", "Information of SRS resource set configuration (version 2)"], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1240", "384", "Information of CSI report configuration (version 2)"], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1624", "32", "Information of antenna configuration (version 1)"], "26": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1656", "96", "Configuration of active uplink BWP (version 3)"], "27": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1752", "96", "Configuration of active downlink BWP (version 3)"], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1848", "256", "Configuration of tracking reference signal (version 1)"], "29": ["Scell Config", "NL1_Scell_Config_V1", "N", "2104", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V10": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V10", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "7", "range[1, 89]"], "5": ["Reference Subcarrier Spacing", "UINT32", "1", "53", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", "Information of RACH configuration (version 1)"], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", "Information of PUSCH configuration (version 3)"], "19": ["PUCCH Config", "NL1_PUCCH_Config_V2", "1", "376", "288", "Information of PUCCH configuration (version 2)"], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "664", "128", "CSS configuration"], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "792", "128", "USS configuration"], "22": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "920", "32", "Information of PDSCH configuration (version 4)"], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "952", "288", "Information of SRS resource set configuration(version 2)"], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1240", "384", "Information of CSI report configuration (version 2)"], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1624", "32", "Information of antenna configuration (version 1)"], "26": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1656", "96", "Configuration of active uplink BWP (version 3)"], "27": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1752", "96", "Configuration of active downlink BWP (version 3)"], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1848", "256", "Configuration of tracking reference signal (version 1)"], "29": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2104", "32", "PCCH Config in idle mode"], "30": ["UE Power Class", "UINT32", "1", "2136", "3", "1,2,3,4, 0:INVALID, Range[0,4]"], "31": ["Reserved", "UINT32", "1", "2139", "29", ""], "32": ["Scell Config", "NL1_Scell_Config_V1", "N", "2168", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V11": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V11", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "7", "range[1, 89]"], "5": ["Reference Subcarrier Spacing", "UINT32", "1", "53", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "7", "range[1, 89]"], "14": ["Reserved", "UINT32", "1", "245", "1", ""], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V1", "1", "248", "96", "Information of RACH configuration (version 1)"], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "344", "32", "Information of PUSCH configuration (version 3)"], "19": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "376", "288", "Information of PUCCH configuration (version 3)"], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "664", "128", "CSS configuration"], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "792", "128", "USS configuration"], "22": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "920", "32", "Information of PDSCH configuration (version 5)"], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "952", "288", "Information of SRS resource set configuration (version 2)"], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1240", "384", "Information of CSI report configuration (version 2)"], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1624", "32", "Information of antenna configuration (version 1)"], "26": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1656", "96", "Configuration of active uplink BWP (version 3)"], "27": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1752", "96", "Configuration of active downlink BWP (version 3)"], "28": ["TRS Config", "NL1_TRS_Config_V1", "8", "1848", "256", "Configuration of tracking reference signal (version 1)"], "29": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2104", "32", "PCCH Config in idle mode"], "30": ["UE Power Class", "UINT32", "1", "2136", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "31": ["UL Point A NARFCN", "UINT32", "1", "2139", "22", "Uplink NR-ARFCN of Point A"], "32": ["Reserved", "UINT32", "1", "2161", "7", ""], "33": ["UL Center Frequency", "UINT32", "1", "2168", "32", "Unit: 5khz"], "34": ["DL Center Frequency", "UINT32", "1", "2200", "32", "Unit: 5khz"], "35": ["Scell Config", "NL1_Scell_Config_V2", "N", "2232", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V12": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V12", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "8", "Frequency band index of FR1"], "5": ["Reserved", "UINT32", "1", "54", "2", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "8", "Frequency band index of FR1"], "14": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "15": ["Reserved", "UINT32", "1", "247", "1", ""], "16": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "376", "32", "Information of PUSCH configuration (version 3)"], "18": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "21": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "952", "32", "Information of PDSCH configuration (version 5)"], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "984", "288", "Information of SRS resource set configuration (version 2)"], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1272", "384", "Information of CSI report configuration (version 2)"], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1656", "32", "Information of antenna configuration (version 1)"], "25": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1688", "96", "Configuration of active uplink BWP (version 3)"], "26": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1784", "96", "Configuration of active downlink BWP (version 3)"], "27": ["TRS Config", "NL1_TRS_Config_V1", "8", "1880", "256", "Configuration of tracking reference signal (version 1)"], "28": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2136", "32", "PCCH Config in idle mode"], "29": ["UE Power Class", "UINT32", "1", "2168", "3", "1,2,3,4, 0:INVALID, Range[0, 4]"], "30": ["UL Point A NARFCN", "UINT32", "1", "2171", "22", "Uplink NR-ARFCN of Point A"], "31": ["Reference Subcarrier Spacing", "UINT32", "1", "2193", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "32": ["Reserved", "UINT32", "1", "2196", "4", ""], "33": ["UL Center Frequency", "UINT32", "1", "2200", "32", "Unit: 5khz"], "34": ["DL Center Frequency", "UINT32", "1", "2232", "32", "Unit: 5khz"], "35": ["Gap Config", "NL1_Gap_Config_V1", "1", "2264", "32", "Information of measurement gap (version 1)"], "36": ["SUL Config", "NL1_SUL_Config_V1", "1", "2296", "32", "Information of SUL configuration (version 1)"], "37": ["Scell Config", "NL1_Scell_Config_V3", "N", "2328", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V13": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V13", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "8", "Frequency band index of FR1"], "5": ["Reserved", "UINT32", "1", "54", "2", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "8", "Frequency band index of FR1"], "14": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "15": ["Reserved", "UINT32", "1", "247", "1", ""], "16": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "376", "32", "Information of PUSCH configuration (version 3)"], "18": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "21": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "952", "32", "Information of PDSCH configuration (version 5)"], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "984", "288", "Information of SRS resource set configuration (version 2)"], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1272", "384", "Information of CSI report configuration (version 2)"], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1656", "32", "Information of antenna configuration (version 1)"], "25": ["Reserved", "UINT32", "1", "1688", "26", ""], "26": ["Default DL BWP Id", "UINT32", "1", "1714", "3", "range[0, 4]"], "27": ["Number of DL BWP", "UINT32", "1", "1717", "3", "range[1, 4]"], "28": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1720", "96", "Configuration of active uplink BWP (version 3)"], "29": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1816", "96", "Configuration of active downlink BWP (version 3)"], "30": ["TRS Config", "NL1_TRS_Config_V1", "8", "1912", "256", "Configuration of tracking reference signal (version 1)"], "31": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2168", "32", "PCCH Config in idle mode"], "32": ["UE Power Class", "UINT32", "1", "2200", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "33": ["UL Point A NARFCN", "UINT32", "1", "2203", "22", "Uplink NR-ARFCN of Point A"], "34": ["Reference Subcarrier Spacing", "UINT32", "1", "2225", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "35": ["Reserved", "UINT32", "1", "2228", "4", ""], "36": ["UL Center Frequency", "UINT32", "1", "2232", "32", "Unit: 5khz"], "37": ["DL Center Frequency", "UINT32", "1", "2264", "32", "Unit: 5khz"], "38": ["Gap Config", "NL1_Gap_Config_V1", "1", "2296", "32", "Information of measurement gap (version 1)"], "39": ["SUL Config", "NL1_SUL_Config_V2", "1", "2328", "704", "Information of SUL configuration (version 2)"], "40": ["Scell Config", "NL1_Scell_Config_V3", "N", "3032", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V14": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V14", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "Frequency band index of FR1 and FR2"], "5": ["Reserved", "UINT32", "1", "55", "1", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "376", "32", "Information of PUSCH configuration (version 4)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", "Information of CSI report configuration (version 2)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", "Configuration of active uplink BWP (version 3)"], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", "Configuration of active downlink BWP (version 3)"], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, rang[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "38": ["SUL Config", "NL1_SUL_Config_V3", "1", "2456", "704", "Information of SUL configuration (version 3)"], "39": ["Scell Config", "NL1_Scell_Config_V4", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V15": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V15", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "Frequency band index of FR1 and FR2"], "5": ["Reserved", "UINT32", "1", "55", "1", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "376", "32", "Information of PUSCH configuration (version 4)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", "Information of CSI report configuration (version 2)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", "Configuration of active uplink BWP (version 3)"], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", "Configuration of active downlink BWP (version 3)"], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "38": ["SUL Config", "NL1_SUL_Config_V3", "1", "2456", "704", "Information of SUL configuration (version 3)"], "39": ["Scell Config", "NL1_Scell_Config_V5", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V16": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V16", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "376", "32", "Information of PUSCH configuration (version 4)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", "Information of CSI report configuration (version 2)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", "Configuration of active uplink BWP (version 3)"], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", "Configuration of active downlink BWP (version 3)"], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "38": ["SUL Config", "NL1_SUL_Config_V3", "1", "2456", "704", "Information of SUL configuration (version 3)"], "39": ["Scell Config", "NL1_Scell_Config_V6", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V17": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V17", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", "Information of PUSCH configuration (version 5)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1400", "384", "Information of CSI report configuration (version 2)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", "Configuration of active uplink BWP (version 3)"], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", "Configuration of active downlink BWP (version 3)"], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "38": ["SUL Config", "NL1_SUL_Config_V4", "1", "2456", "704", "Information of SUL configuration (version 4)"], "39": ["Scell Config", "NL1_Scell_Config_V7", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V18": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V18", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261] Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", "Information of PUSCH configuration (version 5)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", "Information of CSI report configuration (version 3)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1848", "96", "Configuration of active uplink BWP (version 3)"], "28": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1944", "96", "Configuration of active downlink BWP (version 3)"], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "38": ["SUL Config", "NL1_SUL_Config_V4", "1", "2456", "704", "Information of SUL configuration (version 4)"], "39": ["Scell Config", "NL1_Scell_Config_V8", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V19": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V19", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261] Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", "Information of PUSCH configuration (version 5)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", "Information of CSI report configuration (version 3)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Reserved", "UINT32", "1", "1816", "26", ""], "25": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "26": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "27": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "1848", "96", "Configuration of active uplink BWP (version 4)"], "28": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1944", "96", "Configuration of active downlink BWP (version 4)"], "29": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "30": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "31": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "32": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "33": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "34": ["Reserved", "UINT32", "1", "2356", "4", ""], "35": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "36": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "37": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "38": ["SUL Config", "NL1_SUL_Config_V5", "1", "2456", "704", "Information of SUL configuration (version 5)"], "39": ["Scell Config", "NL1_Scell_Config_V9", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V20": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V20", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261] Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", "Information of PUSCH configuration (version 5)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", "Information of CSI report configuration (version 3)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Cell Group Type", "UINT32", "1", "1816", "1", "Enum{0:MCG, 1:SCG}"], "25": ["Reserved", "UINT32", "1", "1817", "25", ""], "26": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "27": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "28": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "1848", "96", "Configuration of active uplink BWP (version 4)"], "29": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1944", "96", "Configuration of active downlink BWP (version 4)"], "30": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "31": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "32": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "33": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "34": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "35": ["Reserved", "UINT32", "1", "2356", "4", ""], "36": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "37": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "38": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "39": ["SUL Config", "NL1_SUL_Config_V5", "1", "2456", "704", "Information of SUL configuration (version 5)"], "40": ["Scell Config", "NL1_Scell_Config_V9", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V21": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V21", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "8", "Frequency band index of FR1"], "5": ["Reserved", "UINT32", "1", "54", "2", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "8", "Frequency band index of FR1"], "14": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "15": ["Reserved", "UINT32", "1", "247", "1", ""], "16": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "17": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "376", "32", "Information of PUSCH configuration (version 3)"], "18": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "19": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "20": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "21": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "952", "32", "Information of PDSCH configuration (version 5)"], "22": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "984", "288", "Information of SRS resource set configuration (version 2)"], "23": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1272", "384", "Information of CSI report configuration (version 2)"], "24": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1656", "32", "Information of antenna configuration (version 1)"], "25": ["UL Carrier Bandwidth", "UINT32", "1", "1688", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "26": ["DL Carrier Bandwidth", "UINT32", "1", "1692", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "27": ["Reserved", "UINT32", "1", "1696", "18", ""], "28": ["Default DL BWP Id", "UINT32", "1", "1714", "3", "range[0, 4]"], "29": ["Number of DL BWP", "UINT32", "1", "1717", "3", "range[1, 4]"], "30": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1720", "96", "Configuration of active uplink BWP (version 3)"], "31": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1816", "96", "Configuration of active downlink BWP (version 3)"], "32": ["TRS Config", "NL1_TRS_Config_V1", "8", "1912", "256", "Configuration of tracking reference signal (version 1)"], "33": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2168", "32", "PCCH Config in idle mode"], "34": ["UE Power Class", "UINT32", "1", "2200", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "35": ["UL Point A NARFCN", "UINT32", "1", "2203", "22", "Uplink NR-ARFCN of Point A"], "36": ["Reference Subcarrier Spacing", "UINT32", "1", "2225", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "37": ["Reserved", "UINT32", "1", "2228", "4", ""], "38": ["UL Center Frequency", "UINT32", "1", "2232", "32", "Unit: 5khz"], "39": ["DL Center Frequency", "UINT32", "1", "2264", "32", "Unit: 5khz"], "40": ["Gap Config", "NL1_Gap_Config_V1", "1", "2296", "32", "Information of measurement gap (version 1)"], "41": ["SUL Config", "NL1_SUL_Config_V2", "1", "2328", "704", "Information of SUL configuration (version 2)"], "42": ["Scell Config", "NL1_Scell_Config_V10", "N", "3032", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V22": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V22", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261] Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", "Information of PUSCH configuration (version 5)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", "Information of CSI report configuration (version 3)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Cell Group Type", "UINT32", "1", "1816", "1", "Enum{0:MCG, 1:SCG}"], "25": ["UL Carrier Bandwidth", "UINT32", "1", "1817", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "26": ["DL Carrier Bandwidth", "UINT32", "1", "1821", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "27": ["Reserved", "UINT32", "1", "1825", "17", ""], "28": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "29": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "30": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "1848", "96", "Configuration of active uplink BWP (version 4)"], "31": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1944", "96", "Configuration of active downlink BWP (version 4)"], "32": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "33": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "34": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "35": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "36": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "37": ["Reserved", "UINT32", "1", "2356", "4", ""], "38": ["UL Center Frequency", "UINT32", "1", "2360", "32", "Unit: 5khz"], "39": ["DL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "40": ["Gap Config", "NL1_Gap_Config_V1", "1", "2424", "32", "Information of measurement gap (version 1)"], "41": ["SUL Config", "NL1_SUL_Config_V5", "1", "2456", "704", "Information of SUL configuration (version 5)"], "42": ["Scell Config", "NL1_Scell_Config_V11", "N", "3160", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V23": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V23", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261] Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "376", "32", "Information of PUSCH configuration (version 5)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", "Information of CSI report configuration (version 3)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Cell Group Type", "UINT32", "1", "1816", "1", "Enum{0:MCG, 1:SCG}"], "25": ["UL Carrier Bandwidth", "UINT32", "1", "1817", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "26": ["DL Carrier Bandwidth", "UINT32", "1", "1821", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "27": ["Reserved", "UINT32", "1", "1825", "17", ""], "28": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "29": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "30": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "1848", "96", "Configuration of active uplink BWP (version 4)"], "31": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1944", "96", "Configuration of active downlink BWP (version 4)"], "32": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "33": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "34": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "35": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "36": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "37": ["Reserved", "UINT32", "1", "2356", "4", ""], "38": ["P Max Valid", "INT16", "1", "2360", "1", "Enum{0: Invalid, 1: Valid}"], "39": ["P Max", "INT16", "1", "2361", "8", "range[-30, 33]"], "40": ["Reserved", "INT16", "1", "2369", "7", ""], "41": ["Qrxlevmin", "INT16", "1", "2376", "16", "range[-70, -22]"], "42": ["UL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "43": ["DL Center Frequency", "UINT32", "1", "2424", "32", "Unit: 5khz"], "44": ["SpCell Config", "NL1_SpCell_Config_V1", "1", "2456", "32", "Information of SpCell Configuration (version 1)"], "45": ["Gap Config", "NL1_Gap_Config_V1", "1", "2488", "32", "Information of measurement gap (version 1)"], "46": ["SUL Config", "NL1_SUL_Config_V5", "1", "2520", "704", "Information of SUL configuration (version 5)"], "47": ["Scell Config", "NL1_Scell_Config_V12", "N", "3224", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V24": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V24", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "9", "range[0, 261] Frequency band index of FR1 and FR2"], "5": ["Cell Group Id", "UINT32", "1", "55", "1", "range[0, 1]"], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "8": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "9": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "10": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "11": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "12": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "13": ["UL Frequency Band", "UINT32", "1", "238", "9", "Frequency band index of FR1 and FR2"], "14": ["CP Type", "UINT32", "1", "247", "1", "Enum{0: Normal, 1: Extended}"], "15": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "16": ["PUSCH Config", "NL1_PUSCH_Config_V6", "1", "376", "32", "Information of PUSCH configuration (version 6)"], "17": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "18": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "19": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "20": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "952", "160", "Information of PDSCH configuration (version 6)"], "21": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1112", "288", "Information of SRS resource set configuration (version 2)"], "22": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1400", "384", "Information of CSI report configuration (version 3)"], "23": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1784", "32", "Information of antenna configuration (version 1)"], "24": ["Cell Group Type", "UINT32", "1", "1816", "1", "Enum{0:MCG, 1:SCG}"], "25": ["UL Carrier Bandwidth", "UINT32", "1", "1817", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "26": ["DL Carrier Bandwidth", "UINT32", "1", "1821", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "27": ["Reserved", "UINT32", "1", "1825", "17", ""], "28": ["Default DL BWP Id", "UINT32", "1", "1842", "3", "range[0, 4]"], "29": ["Number of DL BWP", "UINT32", "1", "1845", "3", "range[1, 4]"], "30": ["Active UL BWP Config", "NL1_BWP_Config_V5", "1", "1848", "96", "Configuration of active uplink BWP (version 5)"], "31": ["Active DL BWP Config", "NL1_BWP_Config_V5", "1", "1944", "96", "Configuration of active downlink BWP (version 5)"], "32": ["TRS Config", "NL1_TRS_Config_V1", "8", "2040", "256", "Configuration of tracking reference signal (version 1)"], "33": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2296", "32", "PCCH Config in idle mode"], "34": ["UE Power Class", "UINT32", "1", "2328", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "35": ["UL Point A NARFCN", "UINT32", "1", "2331", "22", "Uplink NR-ARFCN of Point A"], "36": ["Reference Subcarrier Spacing", "UINT32", "1", "2353", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "37": ["Reserved", "UINT32", "1", "2356", "4", ""], "38": ["P Max Valid", "INT16", "1", "2360", "1", "Enum{0: Invalid, 1: Valid}"], "39": ["P Max", "INT16", "1", "2361", "8", "range[-30, 33]"], "40": ["Reserved", "INT16", "1", "2369", "7", ""], "41": ["Qrxlevmin", "INT16", "1", "2376", "16", "range[-70, -22]"], "42": ["UL Center Frequency", "UINT32", "1", "2392", "32", "Unit: 5khz"], "43": ["DL Center Frequency", "UINT32", "1", "2424", "32", "Unit: 5khz"], "44": ["SpCell Config", "NL1_SpCell_Config_V1", "1", "2456", "32", "Information of SpCell Configuration (version 1)"], "45": ["Gap Config", "NL1_Gap_Config_V1", "1", "2488", "32", "Information of measurement gap (version 1)"], "46": ["DCP Config", "NL1_DCP_Config_V1", "1", "2520", "64", "Information of DCP Configuration (version 1)"], "47": ["SUL Config", "NL1_SUL_Config_V6", "1", "2584", "704", "Information of SUL configuration (version 6)"], "48": ["Scell Config", "NL1_Scell_Config_V13", "N", "3288", "VAR", "N := Number of Scell"]}}, "NL1_PHY_Config_V25": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Ref": {"Scell Config": "Number of Scell"}, "Name": "NL1_PHY_Config_V25", "Data": {"0": ["UE Category", "UINT32", "1", "0", "5", "range[0, 15]"], "1": ["Physical Cell ID", "UINT32", "1", "5", "10", "range[0, 1007]"], "2": ["Number of Transmitted SSB", "UINT32", "1", "15", "9", "range[1, 64]"], "3": ["DL NARFCN", "UINT32", "1", "24", "22", "Downlink NR-ARFCN of SSB"], "4": ["DL Frequency Band", "UINT32", "1", "46", "8", "Frequency band index of FR1"], "5": ["Cell Group Id", "UINT32", "1", "54", "1", "range[0, 1]"], "6": ["Reserved", "UINT32", "1", "55", "1", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "56", "128", "Information of TDD pattern (version 1)"], "8": ["UL NARFCN", "UINT32", "1", "184", "22", "Uplink NR-ARFCN of Point A"], "9": ["SRS Switch Type", "UINT32", "1", "206", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "10": ["SRS Enable", "UINT32", "1", "209", "1", "Enum{0: disable, 1: enable}"], "11": ["SSB Periodicity", "UINT32", "1", "210", "3", "Enum{0: 5ms, 1: 10ms, 2: 20ms, 3: 40ms, 4: 80 ms, 5: 160ms}"], "12": ["Number of Scell", "UINT32", "1", "213", "3", "range[0, 8]"], "13": ["DL Point A NARFCN", "UINT32", "1", "216", "22", "Downlink NR-ARFCN of Point A"], "14": ["UL Frequency Band", "UINT32", "1", "238", "8", "Frequency band index of FR1"], "15": ["CP Type", "UINT32", "1", "246", "1", "Enum{0: Normal, 1: Extended}"], "16": ["Reserved", "UINT32", "1", "247", "1", ""], "17": ["RACH Config", "NL1_RACH_Config_V2", "1", "248", "128", "Information of RACH configuration (version 2)"], "18": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "376", "32", "Information of PUSCH configuration (version 3)"], "19": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "408", "288", "Information of PUCCH configuration (version 3)"], "20": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "696", "128", "CSS configuration"], "21": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "824", "128", "USS configuration"], "22": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "952", "32", "Information of PDSCH configuration (version 5)"], "23": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "984", "288", "Information of SRS resource set configuration (version 2)"], "24": ["CSI Report Config", "NL1_CSI_Report_Config_V4", "4", "1272", "384", "Information of CSI report configuration (version 2)"], "25": ["Antenna Config", "NL1_Antenna_Config_V1", "1", "1656", "32", "Information of antenna configuration (version 1)"], "26": ["UL Carrier Bandwidth", "UINT32", "1", "1688", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "27": ["DL Carrier Bandwidth", "UINT32", "1", "1692", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "28": ["Reserved", "UINT32", "1", "1696", "18", ""], "29": ["Default DL BWP Id", "UINT32", "1", "1714", "3", "range[0, 4]"], "30": ["Number of DL BWP", "UINT32", "1", "1717", "3", "range[1, 4]"], "31": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "1720", "96", "Configuration of active uplink BWP (version 3)"], "32": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1816", "96", "Configuration of active downlink BWP (version 3)"], "33": ["TRS Config", "NL1_TRS_Config_V1", "8", "1912", "256", "Configuration of tracking reference signal (version 1)"], "34": ["PCCH Config", "NL1_PCCH_Config_V1", "1", "2168", "32", "PCCH Config in idle mode"], "35": ["UE Power Class", "UINT32", "1", "2200", "3", "1,2,3,4, 0:INVALID, range[0, 4]"], "36": ["UL Point A NARFCN", "UINT32", "1", "2203", "22", "Uplink NR-ARFCN of Point A"], "37": ["Reference Subcarrier Spacing", "UINT32", "1", "2225", "3", "Enum{0: 15kHz, 1: 30kHz, 2: 60kHz, 3: 120kHz, 4: 240kHz}"], "38": ["Reserved", "UINT32", "1", "2228", "4", ""], "39": ["UL Center Frequency", "UINT32", "1", "2232", "32", "Unit: 5khz"], "40": ["DL Center Frequency", "UINT32", "1", "2264", "32", "Unit: 5khz"], "41": ["SpCell Config", "NL1_SpCell_Config_V1", "1", "2296", "32", "Information of SpCell Configuration (version 1)"], "42": ["Gap Config", "NL1_Gap_Config_V1", "1", "2328", "32", "Information of measurement gap (version 1)"], "43": ["SUL Config", "NL1_SUL_Config_V2", "1", "2360", "704", "Information of SUL configuration (version 2)"], "44": ["Scell Config", "NL1_Scell_Config_V14", "N", "3064", "VAR", "N := Number of Scell"]}}, "NL1_SpCell_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Serv Cell Index", "UINT32", "1", "0", "8", "Serving cell ID of a PSCell.\nThe PCell of the Master Cell Group uses ID = 0."], "1": ["t310", "UINT32", "1", "8", "4", "Enum{0:ms0, 1:ms50, 2:ms100, 3:ms200, 4:ms500, 5:ms1000,\n6:ms2000, 7:ms4000, 8:ms6000}"], "2": ["n310", "UINT32", "1", "12", "3", "Enum{0:n1, 1:n2, 2:n3, 3:n4, 4:n6, 5:n8, 6:n10, 7:n20}"], "3": ["n311", "UINT32", "1", "15", "3", "Enum{0:n1, 1:n2, 2:n3, 3:n4, 4:n5, 5:n6, 6:n8, 7:n10}"], "4": ["Reserved", "UINT32", "1", "18", "14", ""]}, "Name": "NL1_SpCell_Config_V1"}, "NL1_Gap_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Gap Valid", "UINT32", "1", "0", "1", "0: Gap is not configured,\n1: Gap is configured and the following parameters are valid\nEnum{0:not valid, 1:valid}"], "1": ["Gap Period", "UINT32", "1", "1", "2", "range[0, 3], Enum{0:20ms, 1:40ms, 2:80ms, 3:160ms}"], "2": ["Gap Length", "UINT32", "1", "3", "3", "range[0, 5], Enum{0:1_5ms,1:3ms,2:3_5ms,3:4ms,4:5_5ms,5:6ms}"], "3": ["Gap Offset", "UINT32", "1", "6", "8", "range[0, 159]"], "4": ["Reserved", "UINT32", "1", "14", "18", ""]}, "Name": "NL1_Gap_Config_V1"}, "NL1_Scell_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "7", "range[1, 89]"], "3": ["Cell Index", "UINT32", "1", "39", "4", "range[1, 9]"], "4": ["Reserved", "UINT32", "1", "43", "21", ""], "5": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "6": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "7": ["UL Frequency Band", "UINT32", "1", "214", "7", "range[1, 89]"], "8": ["Reserved", "UINT32", "1", "221", "3", ""], "9": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", "Information of PUSCH configuration (version 3)"], "10": ["PUCCH Config", "NL1_PUCCH_Config_V1", "1", "256", "32", "Information of PUCCH configuration (version 1)"], "11": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "288", "128", "CSS configuration"], "12": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "416", "128", "USS configuration"], "13": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "544", "32", "Information of PDSCH configuration (version 4)"], "14": ["Active UL BWP Config", "NL1_BWP_Config_V2", "1", "576", "96", "Configuration of active uplink BWP (version 2)"], "15": ["Active DL BWP Config", "NL1_BWP_Config_V2", "1", "672", "96", "Configuration of active downlink BWP (version 2)"]}, "Name": "NL1_Scell_Config_V1"}, "NL1_Scell_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "7", "range[1, 89]"], "3": ["Cell Index", "UINT32", "1", "39", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "43", "2", "range[1, 2]"], "5": ["Reserved", "UINT32", "1", "45", "19", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "8": ["UL Frequency Band", "UINT32", "1", "214", "7", "range[1, 89]"], "9": ["Cell Type", "UINT32", "1", "221", "1", "Enum{0: DL+UL, 1: Only DL}"], "10": ["Reserved", "UINT32", "1", "222", "2", ""], "11": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", "Information of PUSCH configuration (version 3)"], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "15": ["PDSCH Config", "NL1_PDSCH_Config_V4", "1", "800", "32", "Information of PDSCH configuration (version 4)"], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "832", "96", "Configuration of active uplink BWP (version 3)"], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "928", "96", "Configuration of active downlink BWP (version 3)"], "18": ["UL Center Frequency", "UINT32", "1", "1024", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1056", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1088", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1110", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1120", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1142", "10", ""]}, "Name": "NL1_Scell_Config_V2"}, "NL1_Scell_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "8", "Frequency band index of FR1"], "3": ["Cell Index", "UINT32", "1", "40", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "44", "2", "range[1, 2]"], "5": ["Reserved", "UINT32", "1", "46", "18", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "8": ["UL Frequency Band", "UINT32", "1", "214", "8", "Frequency band index of FR1"], "9": ["Cell Type", "UINT32", "1", "222", "1", "Enum{0: DL+UL, 1: Only DL}"], "10": ["Reserved", "UINT32", "1", "223", "1", ""], "11": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", "Information of PUSCH configuration (version 3)"], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "15": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "800", "32", "Information of PDSCH configuration (version 5)"], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "832", "96", "Configuration of active uplink BWP (version 3)"], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "928", "96", "Configuration of active downlink BWP (version 3)"], "18": ["UL Center Frequency", "UINT32", "1", "1024", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1056", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1088", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1110", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1120", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1142", "10", ""]}, "Name": "NL1_Scell_Config_V3"}, "NL1_Scell_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "2", "range[1, 2]"], "5": ["Reserved", "UINT32", "1", "47", "17", ""], "6": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "7": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "8": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "9": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "10": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "224", "32", "Information of PUSCH configuration (version 4)"], "11": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "12": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "13": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "14": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "15": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", "Configuration of active uplink BWP (version 3)"], "16": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", "Configuration of active downlink BWP (version 3)"], "17": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "18": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "19": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "20": ["Reserved", "UINT32", "1", "1238", "10", ""], "21": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "22": ["Reserved", "UINT32", "1", "1270", "10", ""]}, "Name": "NL1_Scell_Config_V4"}, "NL1_Scell_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "2", "range[1, 2]"], "5": ["CP Type", "UINT32", "1", "47", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "48", "16", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "224", "32", "Information of PUSCH configuration (version 4)"], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", "Configuration of active uplink BWP (version 3)"], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", "Configuration of active downlink BWP (version 3)"], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", "Information of SRS resource set configuration (version 2)"], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1568", "384", "Information of CSI report configuration (version 2)"]}, "Name": "NL1_Scell_Config_V5"}, "NL1_Scell_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "224", "32", "Information of PUSCH configuration (version 4)"], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", "Configuration of active uplink BWP (version 3)"], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", "Configuration of active downlink BWP (version 3)"], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", "Information of SRS resource set configuration (version 2)"], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1568", "384", "Information of CSI report configuration (version 2)"]}, "Name": "NL1_Scell_Config_V6"}, "NL1_Scell_Config_V7": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", "Information of PUSCH configuration (version 5)"], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", "Configuration of active uplink BWP (version 3)"], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", "Configuration of active downlink BWP (version 3)"], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", "Information of SRS resource set configuration (version 2)"], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V2", "4", "1568", "384", "Information of CSI report configuration (version 2)"]}, "Name": "NL1_Scell_Config_V7"}, "NL1_Scell_Config_V8": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", "Information of PUSCH configuration (version 5)"], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "16": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "960", "96", "Configuration of active uplink BWP (version 3)"], "17": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "1056", "96", "Configuration of active downlink BWP (version 3)"], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", "Information of SRS resource set configuration (version 2)"], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1568", "384", "Information of CSI report configuration (version 3)"]}, "Name": "NL1_Scell_Config_V8"}, "NL1_Scell_Config_V9": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["Reserved", "UINT32", "1", "49", "15", ""], "7": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "8": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "9": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "10": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "11": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", "Information of PUSCH configuration (version 5)"], "12": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "13": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "14": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "15": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "16": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "960", "96", "Configuration of active uplink BWP (version 4)"], "17": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1056", "96", "Configuration of active downlink BWP (version 4)"], "18": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "19": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "20": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "21": ["Reserved", "UINT32", "1", "1238", "10", ""], "22": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1270", "6", ""], "24": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "25": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "26": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", "Information of SRS resource set configuration (version 2)"], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1568", "384", "Information of CSI report configuration (version 3)"]}, "Name": "NL1_Scell_Config_V9"}, "NL1_Scell_Config_V10": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "8", "Frequency band index of FR1"], "3": ["Cell Index", "UINT32", "1", "40", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "44", "2", "range[1, 2]"], "5": ["UL Carrier Bandwidth", "UINT32", "1", "46", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "6": ["DL Carrier Bandwidth", "UINT32", "1", "50", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "7": ["Reserved", "UINT32", "1", "54", "10", ""], "8": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "9": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "10": ["UL Frequency Band", "UINT32", "1", "214", "8", "Frequency band index of FR1"], "11": ["Cell Type", "UINT32", "1", "222", "1", "Enum{0: DL+UL, 1: Only DL}"], "12": ["Reserved", "UINT32", "1", "223", "1", ""], "13": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", "Information of PUSCH configuration (version 3)"], "14": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "15": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "16": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "17": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "800", "32", "Information of PDSCH configuration (version 5)"], "18": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "832", "96", "Configuration of active uplink BWP (version 3)"], "19": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "928", "96", "Configuration of active downlink BWP (version 3)"], "20": ["UL Center Frequency", "UINT32", "1", "1024", "32", "Unit: 5khz"], "21": ["DL Center Frequency", "UINT32", "1", "1056", "32", "Unit: 5khz"], "22": ["DL Point A NARFCN", "UINT32", "1", "1088", "22", "Downlink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1110", "10", ""], "24": ["UL Point A NARFCN", "UINT32", "1", "1120", "22", "Uplink NR-ARFCN of Point A"], "25": ["Reserved", "UINT32", "1", "1142", "10", ""]}, "Name": "NL1_Scell_Config_V10"}, "NL1_Scell_Config_V11": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["UL Carrier Bandwidth", "UINT32", "1", "49", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "7": ["DL Carrier Bandwidth", "UINT32", "1", "53", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "8": ["Reserved", "UINT32", "1", "57", "7", ""], "9": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "10": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "11": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "12": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "13": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", "Information of PUSCH configuration (version 5)"], "14": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "15": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "16": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "17": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "18": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "960", "96", "Configuration of active uplink BWP (version 4)"], "19": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1056", "96", "Configuration of active downlink BWP (version 4)"], "20": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "21": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "22": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1238", "10", ""], "24": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "25": ["Reserved", "UINT32", "1", "1270", "6", ""], "26": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "27": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "28": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1280", "288", "Information of SRS resource set configuration (version 2)"], "29": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1568", "384", "Information of CSI report configuration (version 3)"]}, "Name": "NL1_Scell_Config_V11"}, "NL1_Scell_Config_V12": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["UL Carrier Bandwidth", "UINT32", "1", "49", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "7": ["DL Carrier Bandwidth", "UINT32", "1", "53", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "8": ["Reserved", "UINT32", "1", "57", "7", ""], "9": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "10": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "11": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "12": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "13": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "224", "32", "Information of PUSCH configuration (version 5)"], "14": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "15": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "16": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "17": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "18": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "960", "96", "Configuration of active uplink BWP (version 4)"], "19": ["Active DL BWP Config", "NL1_BWP_Config_V4", "1", "1056", "96", "Configuration of active downlink BWP (version 4)"], "20": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "21": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "22": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1238", "10", ""], "24": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "25": ["Reserved", "UINT32", "1", "1270", "6", ""], "26": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "27": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "28": ["P Max Valid", "INT32", "1", "1280", "1", "Enum{0: Invalid, 1: Valid}"], "29": ["P Max", "INT32", "1", "1281", "8", "range[-30, 33]"], "30": ["Reserved", "INT32", "1", "1289", "23", ""], "31": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1312", "288", "Information of SRS resource set configuration (version 2)"], "32": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1600", "384", "Information of CSI report configuration (version 3)"]}, "Name": "NL1_Scell_Config_V12"}, "NL1_Scell_Config_V13": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "9", "Frequency band index of FR1 and FR2"], "3": ["Cell Index", "UINT32", "1", "41", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "45", "3", "range[0, 3], 0: no UL"], "5": ["CP Type", "UINT32", "1", "48", "1", "Enum{0: Normal, 1: Extended}"], "6": ["UL Carrier Bandwidth", "UINT32", "1", "49", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "7": ["DL Carrier Bandwidth", "UINT32", "1", "53", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "8": ["Reserved", "UINT32", "1", "57", "7", ""], "9": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "10": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "11": ["UL Frequency Band", "UINT32", "1", "214", "9", "Frequency band index of FR1 and FR2"], "12": ["Cell Type", "UINT32", "1", "223", "1", "Enum{0: DL+UL, 1: Only DL}"], "13": ["PUSCH Config", "NL1_PUSCH_Config_V6", "1", "224", "32", "Information of PUSCH configuration (version 6)"], "14": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "15": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "16": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "17": ["PDSCH Config", "NL1_PDSCH_Config_V6", "1", "800", "160", "Information of PDSCH configuration (version 6)"], "18": ["Active UL BWP Config", "NL1_BWP_Config_V5", "1", "960", "96", "Configuration of active uplink BWP (version 5)"], "19": ["Active DL BWP Config", "NL1_BWP_Config_V5", "1", "1056", "96", "Configuration of active downlink BWP (version 5)"], "20": ["UL Center Frequency", "UINT32", "1", "1152", "32", "Unit: 5khz"], "21": ["DL Center Frequency", "UINT32", "1", "1184", "32", "Unit: 5khz"], "22": ["DL Point A NARFCN", "UINT32", "1", "1216", "22", "Downlink NR-ARFCN of Point A"], "23": ["Reserved", "UINT32", "1", "1238", "10", ""], "24": ["UL Point A NARFCN", "UINT32", "1", "1248", "22", "Uplink NR-ARFCN of Point A"], "25": ["Reserved", "UINT32", "1", "1270", "6", ""], "26": ["SRS Switch Type", "UINT32", "1", "1276", "3", "Enum{0: 1T2R, 1:1T4R, 2:2T4R, 3:TR equal, 4: no config}"], "27": ["SRS Enable", "UINT32", "1", "1279", "1", "Enum{0: disable, 1: enable}"], "28": ["P Max Valid", "INT32", "1", "1280", "1", "Enum{0: Invalid, 1: Valid}"], "29": ["P Max", "INT32", "1", "1281", "8", "range[-30, 33]"], "30": ["Reserved", "INT32", "1", "1289", "23", ""], "31": ["SRS Resource Set Config", "NL1_SRS_Resource_Set_Config_V2", "1", "1312", "288", "Information of SRS resource set configuration (version 2)"], "32": ["CSI Report Config", "NL1_CSI_Report_Config_V3", "4", "1600", "384", "Information of CSI report configuration (version 3)"]}, "Name": "NL1_Scell_Config_V13"}, "NL1_Scell_Config_V14": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Physical Cell ID", "UINT32", "1", "0", "10", "range[0, 1007]"], "1": ["DL NARFCN", "UINT32", "1", "10", "22", "Downlink NR-ARFCN of SSB"], "2": ["DL Frequency Band", "UINT32", "1", "32", "8", "Frequency band index of FR1"], "3": ["Cell Index", "UINT32", "1", "40", "4", "range[1, 9]"], "4": ["UL Cc Index", "UINT32", "1", "44", "2", "range[1, 2]"], "5": ["SCell Index", "UINT32", "1", "46", "5", "range[1, 31]"], "6": ["UL Carrier Bandwidth", "UINT32", "1", "51", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "7": ["DL Carrier Bandwidth", "UINT32", "1", "55", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "8": ["Reserved", "UINT32", "1", "59", "5", ""], "9": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "64", "128", "Information of TDD pattern (version 1)"], "10": ["UL NARFCN", "UINT32", "1", "192", "22", "Uplink NR-ARFCN of Point A"], "11": ["UL Frequency Band", "UINT32", "1", "214", "8", "Frequency band index of FR1"], "12": ["Cell Type", "UINT32", "1", "222", "1", "Enum{0: DL+UL, 1: Only DL}"], "13": ["Reserved", "UINT32", "1", "223", "1", ""], "14": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "224", "32", "Information of PUSCH configuration (version 3)"], "15": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "256", "288", "Information of PUCCH configuration (version 3)"], "16": ["PDCCH Common Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "544", "128", "CSS configuration"], "17": ["PDCCH UE Specific Search Space Config", "NL1_PDCCH_Search_Space_Config_V1", "2", "672", "128", "USS configuration"], "18": ["PDSCH Config", "NL1_PDSCH_Config_V5", "1", "800", "32", "Information of PDSCH configuration (version 5)"], "19": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "832", "96", "Configuration of active uplink BWP (version 3)"], "20": ["Active DL BWP Config", "NL1_BWP_Config_V3", "1", "928", "96", "Configuration of active downlink BWP (version 3)"], "21": ["UL Center Frequency", "UINT32", "1", "1024", "32", "Unit: 5khz"], "22": ["DL Center Frequency", "UINT32", "1", "1056", "32", "Unit: 5khz"], "23": ["DL Point A NARFCN", "UINT32", "1", "1088", "22", "Downlink NR-ARFCN of Point A"], "24": ["Reserved", "UINT32", "1", "1110", "10", ""], "25": ["UL Point A NARFCN", "UINT32", "1", "1120", "22", "Uplink NR-ARFCN of Point A"], "26": ["Reserved", "UINT32", "1", "1142", "10", ""], "27": ["CSI Report Config", "NL1_CSI_Report_Config_V4", "4", "1152", "384", "Information of CSI report configuration (version 4)"]}, "Name": "NL1_Scell_Config_V14"}, "NL1_SUL_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", "range[80, 89]. Frequency band index for SUL"], "3": ["Reserved", "UINT32", "1", "31", "1", ""]}, "Name": "NL1_SUL_Config_V1"}, "NL1_SUL_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", "range[80, 89]. Frequency band index for SUL"], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", "Information of TDD pattern (version 1)"], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", "Information of RACH configuration (version 2)"], "6": ["PUSCH Config", "NL1_PUSCH_Config_V3", "1", "288", "32", "Information of PUSCH configuration (version 3)"], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", "Information of PUCCH configuration (version 3)"], "8": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "608", "96", "Configuration of active uplink BWP (version 3)"]}, "Name": "NL1_SUL_Config_V2"}, "NL1_SUL_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", "range[80, 89]. Frequency band index for SUL"], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", "Information of TDD pattern (version 1)"], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", "Information of RACH configuration (version 2)"], "6": ["PUSCH Config", "NL1_PUSCH_Config_V4", "1", "288", "32", "Information of PUSCH configuration (version 4)"], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", "Information of PUCCH configuration (version 3)"], "8": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "608", "96", "Configuration of active uplink BWP (version 3)"]}, "Name": "NL1_SUL_Config_V3"}, "NL1_SUL_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", "range[80, 89]. Frequency band index for SUL"], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", "Information of TDD pattern (version 1)"], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", "Information of RACH configuration (version 2)"], "6": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "288", "32", "Information of PUSCH configuration (version 5)"], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", "Information of PUCCH configuration (version 3)"], "8": ["Active UL BWP Config", "NL1_BWP_Config_V3", "1", "608", "96", "Configuration of active uplink BWP (version 3)"]}, "Name": "NL1_SUL_Config_V4"}, "NL1_SUL_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", "range[80, 89]. Frequency band index for SUL"], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", "Information of TDD pattern (version 1)"], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", "Information of RACH configuration (version 2)"], "6": ["PUSCH Config", "NL1_PUSCH_Config_V5", "1", "288", "32", "Information of PUSCH configuration (version 5)"], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", "Information of PUCCH configuration (version 3)"], "8": ["Active UL BWP Config", "NL1_BWP_Config_V4", "1", "608", "96", "Configuration of active uplink BWP (version 4)"]}, "Name": "NL1_SUL_Config_V5"}, "NL1_SUL_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["UL NARFCN", "UINT32", "1", "1", "22", "Uplink NR-ARFCN of Point A"], "2": ["UL Frequency Band", "UINT32", "1", "23", "8", "range[80, 89]. Frequency band index for SUL"], "3": ["Reserved", "UINT32", "1", "31", "1", ""], "4": ["TDD Pattern", "NL1_TDD_UL_DL_Pattern_V1", "2", "32", "128", "Information of TDD pattern (version 1)"], "5": ["RACH Config", "NL1_RACH_Config_V2", "1", "160", "128", "Information of RACH configuration (version 2)"], "6": ["PUSCH Config", "NL1_PUSCH_Config_V6", "1", "288", "32", "Information of PUSCH configuration (version 6)"], "7": ["PUCCH Config", "NL1_PUCCH_Config_V3", "1", "320", "288", "Information of PUCCH configuration (version 3)"], "8": ["Active UL BWP Config", "NL1_BWP_Config_V5", "1", "608", "96", "Configuration of active uplink BWP (version 5)"]}, "Name": "NL1_SUL_Config_V6"}, "NL1_TDD_UL_DL_Pattern_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Transmission Period", "UINT32", "1", "1", "4", "Enum{0: 0_5ms, 1: 0_625ms, 2: 1msB, 3: 1_25ms, 4: 2ms,\n5: 2_5ms, 6: 3ms, 7: 4ms, 8: 5ms, 9: 10ms}"], "2": ["Number of DL slot", "UINT32", "1", "5", "9", "range[0, 320]"], "3": ["Number of UL slot", "UINT32", "1", "14", "9", "range[0, 320]"], "4": ["Number of DL symbol", "UINT32", "1", "23", "4", "range[0, 14]"], "5": ["Number of UL symbol", "UINT32", "1", "27", "4", "range[0, 14]"], "6": ["Reserved", "UINT32", "1", "31", "1", ""], "7": ["Guard Period", "UINT32", "1", "32", "4", "range[0, 10]"], "8": ["Reserved", "UINT32", "1", "36", "28", ""]}, "Name": "NL1_TDD_UL_DL_Pattern_V1"}, "NL1_RACH_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["PRACH Configuration Index", "UINT32", "1", "0", "8", "range[0, 255]"], "1": ["Root Sequence Index", "UINT32", "1", "8", "10", "range[0, 837]"], "2": ["Total Number of Preambles", "UINT32", "1", "18", "6", "range[1, 63]"], "3": ["SSB RO Config Valid", "UINT32", "1", "24", "1", "Enum{0: Invalid, 1: Valid}"], "4": ["SSB Per RO", "UINT32", "1", "25", "3", "Enum{0: 1/8, 1: 1/4, 2: 1/2, 3: 1, 4: 2, 5: 4, 6: 8, 7: 16}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["CB Preambles Per SSB", "UINT32", "1", "32", "6", "range[1, 63]"], "7": ["MSG1 SCS", "UINT32", "1", "38", "3", "Enum{0:15KHz,1:30KHz,2:60KHz,3:120KHz,4:240KHz,5:Invalid}"], "8": ["Reserved", "UINT32", "1", "41", "23", ""], "9": ["Preamble Target Power", "INT16", "1", "64", "16", "Initial preamble power as defined in TS 38.321-5.1.3"], "10": ["SSB RSRP Threshold", "INT16", "1", "80", "16", "RSRP threshold for the selection of SSB\nas defined in TS 38.321 - 5.1.2"]}, "Name": "NL1_RACH_Config_V1"}, "NL1_RACH_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["PRACH Configuration Index", "UINT32", "1", "0", "8", "range[0, 255]"], "1": ["Root Sequence Index", "UINT32", "1", "8", "10", "range[0, 837]"], "2": ["Total Number of Preambles", "UINT32", "1", "18", "6", "range[1, 63]"], "3": ["SSB RO Config Valid", "UINT32", "1", "24", "1", "Enum{0: Invalid, 1: Valid}"], "4": ["SSB Per RO", "UINT32", "1", "25", "3", "Enum{0: 1/8, 1: 1/4, 2: 1/2, 3: 1, 4: 2, 5: 4, 6: 8, 7: 16}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["CB Preambles Per SSB", "UINT32", "1", "32", "6", "range[1, 63]"], "7": ["MSG1 SCS", "UINT32", "1", "38", "3", "Enum{0:15KHz,1:30KHz,2:60KHz,3:120KHz,4:240KHz,5:Invalid}"], "8": ["Reserved", "UINT32", "1", "41", "23", ""], "9": ["Preamble Target Power", "INT16", "1", "64", "16", "Initial preamble power as defined in TS 38.321-5.1.3"], "10": ["SSB RSRP Threshold", "INT16", "1", "80", "16", "RSRP threshold for the selection of SSB\nas defined in TS 38.321 - 5.1.1"], "11": ["SUL RSRP Threshold", "INT16", "1", "96", "16", "RSRP threshold for the selection between NUL and SUL carrier\nas defined in TS 38.321 - 5.1.1"], "12": ["Reserved", "INT16", "1", "112", "16", ""]}, "Name": "NL1_RACH_Config_V2"}, "NL1_PUSCH_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Hopping", "UINT32", "1", "0", "2", "Enum{0: not configured, 1: intra, 2: inter}"], "1": ["Tx Config Type", "UINT32", "1", "2", "1", "Enum{0: Codebook, 1: Non-codebook}"], "2": ["Resource Allocation", "UINT32", "1", "3", "1", "Enum{0: Type 0, 1: Type 1}"], "3": ["Max MCS", "UINT32", "1", "4", "1", "Enum{0: 64QAM, 1: 256QAM}"], "4": ["Max Rank", "UINT32", "1", "5", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "5": ["RBG Size", "UINT32", "1", "7", "1", "Enum{0: Config 1, 1: Config 2}"], "6": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "8", "2", "range[0, 3]"], "7": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "10", "2", "range[0, 3]"], "8": ["Reserved", "UINT32", "1", "12", "20", ""]}, "Name": "NL1_PUSCH_Config_V3"}, "NL1_PUSCH_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Hopping", "UINT32", "1", "0", "2", "Enum{0: not configured, 1: intra, 2: inter}"], "1": ["Tx Config Type", "UINT32", "1", "2", "1", "Enum{0: Codebook, 1: Non-codebook}"], "2": ["Resource Allocation", "UINT32", "1", "3", "1", "Enum{0: Type 0, 1: Type 1}"], "3": ["Max MCS", "UINT32", "1", "4", "1", "Enum{0: 64QAM, 1: 256QAM}"], "4": ["Max Rank", "UINT32", "1", "5", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "5": ["RBG Size", "UINT32", "1", "7", "1", "Enum{0: Config 1, 1: Config 2}"], "6": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "8", "2", "range[0, 3]"], "7": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "10", "2", "range[0, 3]"], "8": ["PTRS Config Valid", "UINT32", "1", "12", "1", "Enum{0 : invalid, 1: valid}"], "9": ["Reserved", "UINT32", "1", "13", "19", ""]}, "Name": "NL1_PUSCH_Config_V4"}, "NL1_PUSCH_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Hopping", "UINT32", "1", "0", "2", "Enum{0: not configured, 1: intra, 2: inter}"], "1": ["Tx Config Type", "UINT32", "1", "2", "1", "Enum{0: Codebook, 1: Non-codebook}"], "2": ["Resource Allocation", "UINT32", "1", "3", "1", "Enum{0: Type 0, 1: Type 1}"], "3": ["Max MCS", "UINT32", "1", "4", "1", "Enum{0: 64QAM, 1: 256QAM}"], "4": ["Max Rank", "UINT32", "1", "5", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "5": ["RBG Size", "UINT32", "1", "7", "1", "Enum{0: Config 1, 1: Config 2}"], "6": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "8", "2", "range[0, 3]"], "7": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "10", "2", "range[0, 3]"], "8": ["PTRS Config Valid", "UINT32", "1", "12", "1", "Enum{0 : invalid, 1: valid}"], "9": ["Transform Precoder", "UINT32", "1", "13", "1", "range[0, 1], Enum{0: Disabled, 1: Enabled}"], "10": ["Reserved", "UINT32", "1", "14", "18", ""]}, "Name": "NL1_PUSCH_Config_V5"}, "NL1_PUSCH_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Hopping", "UINT32", "1", "0", "2", "Enum{0: not configured, 1: intra, 2: inter}"], "1": ["Tx Config Type", "UINT32", "1", "2", "1", "Enum{0: Codebook, 1: Non-codebook}"], "2": ["Resource Allocation", "UINT32", "1", "3", "1", "Enum{0: Type 0, 1: Type 1}"], "3": ["Max MCS", "UINT32", "1", "4", "1", "Enum{0: 64QAM, 1: 256QAM}"], "4": ["Max Rank", "UINT32", "1", "5", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "5": ["RBG Size", "UINT32", "1", "7", "1", "Enum{0: Config 1, 1: Config 2}"], "6": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "8", "2", "range[0, 3]"], "7": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "10", "2", "range[0, 3]"], "8": ["PTRS Config Valid", "UINT32", "1", "12", "1", "Enum{0 : invalid, 1: valid}"], "9": ["Transform Precoder", "UINT32", "1", "13", "1", "range[0, 1], Enum{0: Disabled, 1: Enabled}"], "10": ["uplink TX switching valid", "UINT32", "1", "14", "1", "Enum{0: Invalid config, 1: Valid config}"], "11": ["uplink TX switching period location", "UINT32", "1", "15", "1", "Enum{0: False, 1: True}"], "12": ["uplink TX switching carrier", "UINT32", "1", "16", "1", "Enum{0: carrier1, 1: carrier2}"], "13": ["Reserved", "UINT32", "1", "17", "15", ""]}, "Name": "NL1_PUSCH_Config_V6"}, "NL1_PUCCH_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Group Hopping", "UINT32", "1", "0", "1", "Enum{0: Disabled, 1: Enabled}"], "1": ["Sequence Hopping", "UINT32", "1", "1", "1", "Enum{0: Disabled, 1: Enabled}"], "2": ["Inter Slot Frequency Hopping", "UINT32", "1", "2", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "3": ["Additional DMRS", "UINT32", "1", "6", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "4": ["Reserved", "UINT32", "1", "10", "22", ""]}, "Name": "NL1_PUCCH_Config_V1"}, "NL1_PUCCH_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Group Hopping", "UINT32", "1", "0", "1", "Enum{0: Disabled, 1: Enabled}"], "1": ["Sequence Hopping", "UINT32", "1", "1", "1", "Enum{0: Disabled, 1: Enabled}"], "2": ["Inter Slot Frequency Hopping", "UINT32", "1", "2", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "3": ["Additional DMRS", "UINT32", "1", "6", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "4": ["Reserved", "UINT32", "1", "10", "22", ""], "5": ["SR Resource Config", "NL1_SR_Resource_Config_V1", "8", "32", "256", "Information of scheduling request resource configuration (v1)"]}, "Name": "NL1_PUCCH_Config_V2"}, "NL1_PUCCH_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Vaid", "UINT32", "1", "0", "1", "Enum{0: Invalid config, 1: Valid config}"], "1": ["Group Hopping", "UINT32", "1", "1", "1", "Enum{0: Disabled, 1: Enabled}"], "2": ["Sequence Hopping", "UINT32", "1", "2", "1", "Enum{0: Disabled, 1: Enabled}"], "3": ["Inter Slot Frequency Hopping", "UINT32", "1", "3", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "4": ["Additional DMRS", "UINT32", "1", "7", "4", "Bit 0 means format 1, bit 1 means format 2, and so on.\nValue 0 means disabled, value 1 means enabled."], "5": ["Reserved", "UINT32", "1", "11", "21", ""], "6": ["SR Resource Config", "NL1_SR_Resource_Config_V1", "8", "32", "256", "Information of scheduling request resource configuration (v1)"]}, "Name": "NL1_PUCCH_Config_V3"}, "NL1_SR_Resource_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Vaid", "UINT32", "1", "0", "1", "Enum{0: Invalid config, 1: Valid config}"], "1": ["Resource Id", "UINT32", "1", "1", "3", "range[0, 7]"], "2": ["SR Id", "UINT32", "1", "4", "3", "range[0, 7]"], "3": ["Periodicity as Symbols", "UINT32", "1", "7", "1", "0: The unit of periodicity is slots, 1: The unit of\nperiodicity is symbols\nEnum{0:Period unit is slots,1:Period unit is symbols}"], "4": ["Periodicity", "UINT32", "1", "8", "10", "range[1, 640]"], "5": ["Offset", "UINT32", "1", "18", "10", "range[0, 639]"], "6": ["Reserved", "UINT32", "1", "28", "4", ""]}, "Name": "NL1_SR_Resource_Config_V1"}, "NL1_PDCCH_Search_Space_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Search Space", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Search Space ID", "UINT32", "1", "1", "6", "range[0, 39]"], "2": ["Slot Periodicity", "UINT32", "1", "7", "4", "Enum{0: 1 slot, 1: 2 slots, 2: 4 slots, 3: 5 slots, 4: 8 slots, 5: 10 slots, 6: 16 slots, 7: 20 slots,\n8: 40 slots,9: 80 slots,10: 160 slots,11: 320 slots,12: 640 slots,13: 1280 slots,14: 2560 slots}"], "3": ["Slot Offset", "UINT32", "1", "11", "12", "range[0, 2559]"], "4": ["Reserved", "UINT32", "1", "23", "9", ""], "5": ["Duration", "UINT32", "1", "32", "12", "range[2, 2559]"], "6": ["Monitoring Symbols", "UINT32", "1", "44", "14", "bit 0 means symbol 0, bit 1 means symbol 1, and so on."], "7": ["Monitoring 0_0 and 1_0", "UINT32", "1", "58", "1", "Enum{0: False, 1: True}"], "8": ["Monitoring 0_1 and 1_1", "UINT32", "1", "59", "1", "Enum{0: False, 1: True}"], "9": ["Monitoring 2_0", "UINT32", "1", "60", "1", "Enum{0: False, 1: True}"], "10": ["Monitoring 2_1", "UINT32", "1", "61", "1", "Enum{0: False, 1: True}"], "11": ["Monitoring 2_2", "UINT32", "1", "62", "1", "Enum{0: False, 1: True}"], "12": ["Monitoring 2_3", "UINT32", "1", "63", "1", "Enum{0: False, 1: True}"]}, "Name": "NL1_PDCCH_Search_Space_Config_V1"}, "NL1_PDSCH_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Allocation", "UINT32", "1", "0", "2", "Enum{0: Type 0, 1: Type 1, 2: Dynamic switch}"], "1": ["RBG Size", "UINT32", "1", "2", "1", "Enum{0: Config 1, 1: Config 2}"], "2": ["Max MCS", "UINT32", "1", "3", "1", "Enum{0: 64QAM, 1: 256QAM}"], "3": ["Max Rank", "UINT32", "1", "4", "2", "Enum{0 : Rank 1, 1: Rank 2, 2: Rank 3, 3: Rank 4}"], "4": ["PRB Bundling Type", "UINT32", "1", "6", "1", "Enum{0: Static, 1: Dynamic}"], "5": ["PRB Bundling Size", "UINT32", "1", "7", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "6": ["PRB Bundling Size Set 1", "UINT32", "1", "10", "3", "Enum{0: N2, 1: N4, 2: Wideband,3: N2 wideband, 4: N4 wideband}"], "7": ["PRB Bundling Size Set 2", "UINT32", "1", "13", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "8": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "16", "2", "range[0, 3]"], "9": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "18", "2", "range[0, 3]"], "10": ["QCL Source", "UINT32", "1", "20", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "11": ["QCL Source ID", "UINT32", "1", "22", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "12": ["QCL Type", "UINT32", "1", "29", "2", "Valid only when QCL Source is valid.\nEnum{0: Type A, 1: Type B, 2: Type C, 3: Type D}"], "13": ["Reserved", "UINT32", "1", "31", "1", ""]}, "Name": "NL1_PDSCH_Config_V4"}, "NL1_PDSCH_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Allocation", "UINT32", "1", "0", "2", "Enum{0: Type 0, 1: Type 1, 2: Dynamic switch}"], "1": ["RBG Size", "UINT32", "1", "2", "1", "Enum{0: Config 1, 1: Config 2}"], "2": ["Max MCS", "UINT32", "1", "3", "1", "Enum{0: 64QAM, 1: 256QAM}"], "3": ["Max Rank", "UINT32", "1", "4", "3", "Enum{0 : Rank 1, 1 : Rank 2, 2 : Rank 3, 3 : Rank 4,\n4 : Rank 5, 5 : Rank 6, 6 : Rank 7, 7 : Rank 8}"], "4": ["PRB Bundling Type", "UINT32", "1", "7", "1", "Enum{0: Static, 1: Dynamic}"], "5": ["PRB Bundling Size", "UINT32", "1", "8", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "6": ["PRB Bundling Size Set 1", "UINT32", "1", "11", "3", "Enum{0: N2, 1: N4, 2: Wideband, 3:N2 wideband, 4: N4 wideband}"], "7": ["PRB Bundling Size Set 2", "UINT32", "1", "14", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "8": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "17", "2", "range[0, 3]"], "9": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "19", "2", "range[0, 3]"], "10": ["QCL Source", "UINT32", "1", "21", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "11": ["QCL Source ID", "UINT32", "1", "23", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "12": ["QCL Type", "UINT32", "1", "30", "2", "Valid only when QCL Source is valid.\nEnum{0: Type A, 1: Type B, 2: Type C, 3: Type D}"]}, "Name": "NL1_PDSCH_Config_V5"}, "NL1_PDSCH_Config_V6": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Allocation", "UINT32", "1", "0", "2", "Enum{0: Type 0, 1: Type 1, 2: Dynamic switch}"], "1": ["RBG Size", "UINT32", "1", "2", "1", "Enum{0: Config 1, 1: Config 2}"], "2": ["Max MCS", "UINT32", "1", "3", "1", "Enum{0: 64QAM, 1: 256QAM}"], "3": ["Max Rank", "UINT32", "1", "4", "3", "Enum{0 : Rank 1, 1 : Rank 2, 2 : Rank 3, 3 : Rank 4,\n4 : Rank 5, 5 : Rank 6, 6 : Rank 7, 7 : Rank 8}"], "4": ["PRB Bundling Type", "UINT32", "1", "7", "1", "Enum{0: Static, 1: Dynamic}"], "5": ["PRB Bundling Size", "UINT32", "1", "8", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "6": ["PRB Bundling Size Set 1", "UINT32", "1", "11", "3", "Enum{0: N2, 1: N4, 2: Wideband, 3: N2 wideband, 4:N4 wideband}"], "7": ["PRB Bundling Size Set 2", "UINT32", "1", "14", "3", "Enum{0: N2, 1: N4, 2: Wideband}"], "8": ["DMRS Additional Position for Mapping Type A", "UINT32", "1", "17", "2", "range[0, 3]"], "9": ["DMRS Additional Position for Mapping Type B", "UINT32", "1", "19", "2", "range[0, 3]"], "10": ["QCL Source", "UINT32", "1", "21", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "11": ["QCL Source ID", "UINT32", "1", "23", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "12": ["QCL Type", "UINT32", "1", "30", "2", "Valid only when QCL Source is valid.\nEnum{0: Type A, 1: Type B, 2: Type C, 3: Type D}"], "13": ["Reserved", "UINT32", "1", "32", "31", ""], "14": ["PTRS Config Valid", "UINT32", "1", "63", "1", "Enum{0 : invalid, 1: valid}"], "15": ["PTRS Config", "NL1_PDSCH_PTRS_Config_V1", "1", "64", "96", "Valid if PTRS Config Valid=1"]}, "Name": "NL1_PDSCH_Config_V6"}, "NL1_PDSCH_PTRS_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Frequency Density Valid", "UINT32", "1", "0", "1", "Enum{0: invalid, 1:valid}"], "1": ["Time Density Valid", "UINT32", "1", "1", "1", "Enum{0: invalid, 1:valid}"], "2": ["Epre Ratio", "UINT32", "1", "2", "2", "range[0, 3]"], "3": ["Resource Element Offset", "UINT32", "1", "4", "2", "Enum{0: Offset00, 1: Offset01, 2: Offset10, 3: Offset11}"], "4": ["Reserved", "UINT32", "1", "6", "26", ""], "5": ["Frequency Density", "UINT16", "2", "32", "32", "range[1, 276], valid only if Frequency Density Valid=1"], "6": ["Time Density", "UINT8", "3", "64", "24", "range[0, 29], valid only if Time Density Valid=1"], "7": ["Reserved", "UINT8", "1", "88", "8", ""]}, "Name": "NL1_PDSCH_PTRS_Config_V1"}, "NL1_SRS_Resource_Set_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Resource Set Id", "UINT16", "1", "0", "4", "range[0, 15]"], "1": ["Usage", "UINT16", "1", "4", "2", "Enum{0: beam management, 1: codebook, 2: non-codebook,\n3: antenna switching}"], "2": ["alpha", "UINT16", "1", "6", "3", "Enum{0:0,1: 0_4, 2: 0_5, 3: 0_6, 4: 0_7, 5: 0_8, 6: 0_9, 7: 1}"], "3": ["Reserved", "UINT16", "1", "9", "7", ""], "4": ["p0", "INT16", "1", "16", "16", "range[-202, 24]"], "5": ["SRS Resources", "NL1_SRS_Resource_Config_V2", "4", "32", "256", "Information of SRS resource configuration (version 2)"]}, "Name": "NL1_SRS_Resource_Set_Config_V2"}, "NL1_SRS_Resource_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Resource Id", "UINT32", "1", "1", "6", "range[0, 63]"], "2": ["Resource Type", "UINT32", "1", "7", "2", "Enum{0: aperiodic, 1: semi-persistent, 2: periodic}"], "3": ["Number of SRS Ports", "UINT32", "1", "9", "3", "range[1, 4]"], "4": ["Number of Symbols", "UINT32", "1", "12", "3", "range[1, 4]"], "5": ["Frequency Domain Position", "UINT32", "1", "15", "7", "range[0, 67]"], "6": ["Frequency Domain Shift", "UINT32", "1", "22", "9", "range[0, 268]"], "7": ["Reserved", "UINT32", "1", "31", "1", ""], "8": ["Periodicity", "UINT32", "1", "32", "12", "range[1, 2560]"], "9": ["Offset", "UINT32", "1", "44", "12", "range[0, 2559]"], "10": ["Frequency Hopping", "UINT32", "1", "56", "2", "Enum{0: disabled, 1: enabled}"], "11": ["Reserved", "UINT32", "1", "58", "6", ""]}, "Name": "NL1_SRS_Resource_Config_V2"}, "NL1_NZP_CSI_RS_Resource_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Config", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Resource Id", "UINT32", "1", "1", "8", "range[0, 191]"], "2": ["Periodicity Offset Valid", "UINT32", "1", "9", "1", "Enum{0: False, 1: True}"], "3": ["Periodicity", "UINT32", "1", "10", "10", "range[4, 640]"], "4": ["Offset", "UINT32", "1", "20", "10", "range[0, 639]"], "5": ["Reserved", "UINT32", "1", "30", "2", ""]}, "Name": "NL1_NZP_CSI_RS_Resource_V1"}, "NL1_CSI_Report_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Config", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Report Config Id", "UINT32", "1", "1", "6", "range[0, 47]"], "2": ["Serving Cell Index", "UINT32", "1", "7", "5", "range[0, 31]"], "3": ["Report Config Type", "UINT32", "1", "12", "2", "Enum{0: Periodic,1: Semi-persistent on PUCCH,\n2: Semi-persistent on PUSCH, 3: Aperiodic}"], "4": ["Report Periodicity", "UINT32", "1", "14", "9", "range[4, 320]. Valid only when Report Config Type is periodic\nor semi-persistent."], "5": ["Report Quantity", "UINT32", "1", "23", "3", "Enum{0: None,1: CRI_RI_PMI_CQI, 2: RI_I1,3: RI_I1_CQI,\n4:CRI_RI_CQI,5:CRI_RSRP,6:SSB Index RSRP,7:CRI_RI_LI_PMI_CQ}"], "6": ["CQI Reporting Granularity", "UINT32", "1", "26", "1", "Enum{0: wideband, 1: subband}"], "7": ["PMI Reporting Granularity", "UINT32", "1", "27", "1", "Enum{0: wideband, 1: subband}"], "8": ["Reserved", "UINT32", "1", "28", "4", ""], "9": ["Number of Subbands", "UINT32", "1", "32", "5", "range[3, 19]"], "10": ["Subband Size", "UINT32", "1", "37", "6", "4 or 8 or 16 or 32"], "11": ["Codebook Config", "UINT32", "1", "43", "2", "Enum{0: Type I Single Panel, 1:Type I Multi Panel,2: Type II,\n3: Type II Port Selection}"], "12": ["Reserved", "UINT32", "1", "45", "19", ""], "13": ["NZP CSI RS Resource", "NL1_NZP_CSI_RS_Resource_V2", "1", "64", "32", "Information of non-zero-power CSI-RS resource (version 2)"]}, "Name": "NL1_CSI_Report_Config_V2"}, "NL1_CSI_Report_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Config", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Report Config Id", "UINT32", "1", "1", "6", "range[0, 47]"], "2": ["Serving Cell Index", "UINT32", "1", "7", "5", "range[0, 31]"], "3": ["Report Config Type", "UINT32", "1", "12", "2", "Enum{0: Periodic,1: Semi-persistent on PUCCH,\n2: Semi-persistent on PUSCH, 3: Aperiodic}"], "4": ["Report Periodicity", "UINT32", "1", "14", "9", "range[4, 320]. Valid only when Report Config Type is periodic\nor semi-persistent."], "5": ["Report Quantity", "UINT32", "1", "23", "3", "Enum{0: None,1: CRI_RI_PMI_CQI, 2: RI_I1,3: RI_I1_CQI,\n4:CRI_RI_CQI,5:CRI_RSRP,6:SSB Index RSRP,7:CRI_RI_LI_PMI_CQ}"], "6": ["CQI Reporting Granularity", "UINT32", "1", "26", "1", "Enum{0: wideband, 1: subband}"], "7": ["PMI Reporting Granularity", "UINT32", "1", "27", "1", "Enum{0: wideband, 1: subband}"], "8": ["CQI Table Valid", "UINT32", "1", "28", "1", "Enum{0: Invalid, 1: Valid}"], "9": ["CQI Table Index", "UINT32", "1", "29", "2", "Range[1,3]"], "10": ["Reserved", "UINT32", "1", "31", "1", ""], "11": ["Number of Subbands", "UINT32", "1", "32", "5", "range[3, 19]"], "12": ["Subband Size", "UINT32", "1", "37", "6", "4 or 8 or 16 or 32"], "13": ["Codebook Config", "UINT32", "1", "43", "2", "Enum{0: Type I Single Panel, 1:Type I Multi Panel,2: Type II,\n3: Type II Port Selection}"], "14": ["Reserved", "UINT32", "1", "45", "19", ""], "15": ["NZP CSI RS Resource", "NL1_NZP_CSI_RS_Resource_V2", "1", "64", "32", "Information of non-zero-power CSI-RS resource (version 2)"]}, "Name": "NL1_CSI_Report_Config_V3"}, "NL1_CSI_Report_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid Config", "UINT32", "1", "0", "1", "Enum{0: Invalid, 1: Valid}"], "1": ["Report Config Id", "UINT32", "1", "1", "6", "range[0, 47]"], "2": ["Serving Cell Index", "UINT32", "1", "7", "5", "range[0, 31]"], "3": ["Report Config Type", "UINT32", "1", "12", "2", "Enum{0: Periodic,1: Semi-persistent on PUCCH,\n2: Semi-persistent on PUSCH, 3: Aperiodic}"], "4": ["Report Periodicity", "UINT32", "1", "14", "9", "range[4, 320]. Valid only when Report Config Type is periodic\nor semi-persistent."], "5": ["Report Quantity", "UINT32", "1", "23", "3", "Enum{0: None,1: CRI_RI_PMI_CQI, 2: RI_I1,3: RI_I1_CQI,\n4:CRI_RI_CQI,5:CRI_RSRP,6:SSB Index RSRP,7:CRI_RI_LI_PMI_CQ}"], "6": ["CQI Reporting Granularity", "UINT32", "1", "26", "1", "Enum{0: wideband, 1: subband}"], "7": ["PMI Reporting Granularity", "UINT32", "1", "27", "1", "Enum{0: wideband, 1: subband}"], "8": ["CQI Table Valid", "UINT32", "1", "28", "1", "Enum{0: Invalid, 1: Valid}"], "9": ["CQI Table Index", "UINT32", "1", "29", "2", "Range[1,3]"], "10": ["Reserved", "UINT32", "1", "31", "1", ""], "11": ["Number of Subbands", "UINT32", "1", "32", "5", "range[3, 19]"], "12": ["Subband Size", "UINT32", "1", "37", "6", "4 or 8 or 16 or 32"], "13": ["Codebook Config", "UINT32", "1", "43", "2", "Enum{0: Type I Single Panel, 1:Type I Multi Panel,2: Type II,\n3: Type II Port Selection}"], "14": ["Report Offset", "UINT32", "1", "45", "9", "range[0, 319]"], "15": ["Reserved", "UINT32", "1", "54", "10", ""], "16": ["NZP CSI RS Resource", "NL1_NZP_CSI_RS_Resource_V2", "1", "64", "32", "Information of non-zero-power CSI-RS resource (version 2)"]}, "Name": "NL1_CSI_Report_Config_V4"}, "NL1_NZP_CSI_RS_Resource_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Periodicity Offset Valid", "UINT32", "1", "0", "1", "Enum{0: False, 1: True}"], "1": ["Periodicity", "UINT32", "1", "1", "10", "range[4, 640]"], "2": ["Offset", "UINT32", "1", "11", "10", "range[0, 639]"], "3": ["Number of Ports", "UINT32", "1", "21", "6", "range[1, 32]"], "4": ["Reserved", "UINT32", "1", "27", "5", ""]}, "Name": "NL1_NZP_CSI_RS_Resource_V2"}, "NL1_Antenna_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Transmission Mode", "UINT32", "1", "0", "4", "range[1, 10]"], "1": ["Tx Antenna Selection", "UINT32", "1", "4", "2", "Enum{0: Disabled, 1: Closed loop, 2: Open loop}"], "2": ["Reserved", "UINT32", "1", "6", "26", ""]}, "Name": "NL1_Antenna_Config_V1"}, "NL1_BWP_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]"], "1": ["BWP start", "UINT32", "1", "3", "9", "Initial position of BWP as defined in TS 38.213 clause 12"], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Reserved", "UINT32", "1", "24", "8", ""], "5": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"]}, "Name": "NL1_BWP_Config_V1"}, "NL1_BWP_Config_V2": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]. 0: initial"], "1": ["BWP start", "UINT32", "1", "3", "9", "Initial position of BWP as defined in TS 38.213 clause 12"], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Reserved", "UINT32", "1", "24", "8", ""], "5": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"], "6": ["locationAndBandwidth", "UINT32", "1", "64", "16", "range[0, 37949]"], "7": ["Reserved", "UINT32", "1", "80", "16", ""]}, "Name": "NL1_BWP_Config_V2"}, "NL1_BWP_Config_V3": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]. 0: initial"], "1": ["BWP start", "UINT32", "1", "3", "9", "Initial position of BWP as defined in TS 38.213 clause 12"], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Bandwidth", "UINT32", "1", "24", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:200MHz,\n13:400MHz}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"], "7": ["locationAndBandwidth", "UINT32", "1", "64", "16", "range[0, 37949]"], "8": ["Reserved", "UINT32", "1", "80", "16", ""]}, "Name": "NL1_BWP_Config_V3"}, "NL1_BWP_Config_V4": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]. 0: initial"], "1": ["BWP start", "UINT32", "1", "3", "9", "Initial position of BWP as defined in TS 38.213 clause 12"], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Bandwidth", "UINT32", "1", "24", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "5": ["Reserved", "UINT32", "1", "28", "4", ""], "6": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"], "7": ["locationAndBandwidth", "UINT32", "1", "64", "16", "range[0, 37949]"], "8": ["Reserved", "UINT32", "1", "80", "16", ""]}, "Name": "NL1_BWP_Config_V4"}, "NL1_BWP_Config_V5": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["BWP Id", "UINT32", "1", "0", "3", "range[0, 4]. 0: initial"], "1": ["BWP start", "UINT32", "1", "3", "9", "Initial position of BWP as defined in TS 38.213 clause 12"], "2": ["BWP size", "UINT32", "1", "12", "9", "range[0, 275]"], "3": ["Sub carrier Spacing", "UINT32", "1", "21", "3", "{0, 1, 2, 3, 4} indicates SCS={15, 30, 60, 120, 240} khz\nEnum{0:15khz, 1:30khz, 2:60khz, 3:120khz, 4:240khz}"], "4": ["Bandwidth", "UINT32", "1", "24", "4", "Quantized bandwidth in MHz\nEnum{0:5MHz,1:10Mhz,2:15Mhz,3:20Mhz,4:25Mhz,5:30MHz,6:40MHz,\n7:50MHz,8:60MHz,9:80MHz,10:90MHz,11:100MHz,12:70MHz,13:200MHz,\n14:400MHz}"], "5": ["Max MIMO LayersDL", "UINT32", "1", "28", "4", "DL BWP only. Maximum number of MIMO layers to be used for\nPDSCH in this DL BWP.\nrange[1, 8]. 0: invalid"], "6": ["Max throughput", "UINT32", "1", "32", "32", "Maximum throughput of this BWP based on the current physical\nconfiguration (KB/s)"], "7": ["locationAndBandwidth", "UINT32", "1", "64", "16", "range[0, 37949]"], "8": ["Reserved", "UINT32", "1", "80", "16", ""]}, "Name": "NL1_BWP_Config_V5"}, "NL1_TRS_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Periodicity", "UINT32", "1", "0", "10", "range[4, 640]"], "1": ["PRB Number", "UINT32", "1", "10", "9", "range[0, 273]"], "2": ["QCL Source", "UINT32", "1", "19", "2", "Enum{0: invalid, 1: SSB, 2: CSI-RS}"], "3": ["QCL Source ID", "UINT32", "1", "21", "7", "If QCL Source is SSB, the ID means SSB index. If QCL Source is\nCSI-RS, the ID means CSI-RS resource ID."], "4": ["QCL Type", "UINT32", "1", "28", "2", "Valid only when QCL Source is valid.\nEnum{ 0: Type A, 1: Type B, 2: Type C, 3: Type D}"], "5": ["Reserved", "UINT32", "1", "30", "2", ""]}, "Name": "NL1_TRS_Config_V1"}, "NL1_PCCH_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["PCCH Config Idle Valid", "UINT32", "1", "0", "1", "Enum{0: invalid, 1: valid}, valid once UE enters idle mode"], "1": ["Default Paging Cycle", "UINT32", "1", "1", "9", "range[32, 256]"], "2": ["N", "UINT32", "1", "10", "3", "Enum{0: 1T, 1: T/2, 2: T/4, 3: T/8, 4: T/16}"], "3": ["Paging Offset", "UINT32", "1", "13", "4", "range[0, 15]"], "4": ["Ns", "UINT32", "1", "17", "3", "range[1, 4]"], "5": ["User Specific Paging Cycle", "UINT32", "1", "20", "9", "range[32, 256]"], "6": ["Reserved", "UINT32", "1", "29", "3", ""]}, "Name": "NL1_PCCH_Config_V1"}, "NL1_DCP_Config_V1": {"ColNum": 6, "Header": ["Field", "Type Name", "Count", "Offset", "Length\n(bits)", "Description"], "Data": {"0": ["Valid", "UINT32", "1", "0", "1", "Enum{0: invalid, 1: valid}"], "1": ["ps RNTI", "UINT32", "1", "1", "16", "range[0, 65535]"], "2": ["ps Offset", "UINT32", "1", "17", "8", "range[1, 120]"], "3": ["Reserved", "UINT32", "1", "25", "7", ""], "4": ["size DCI 2_6", "UINT32", "1", "32", "8", "range[1, 140]"], "5": ["ps position dci 2_6", "UINT32", "1", "40", "8", "range[0, 139]"], "6": ["ps wake up", "UINT32", "1", "48", "1", "Enum{0: False, 1: True}"], "7": ["ps transmit periodic l1 rsrp", "UINT32", "1", "49", "1", "Enum{0: False, 1: True}"], "8": ["ps transmit Other Periodic CSI", "UINT32", "1", "50", "1", "Enum{0: False, 1: True}"], "9": ["Reserved", "UINT32", "1", "51", "13", ""]}, "Name": "NL1_DCP_Config_V1"}}},
Public JSON end */
-// Checksum : [1660e5811b0c7ae74b19ecccf5dfb8c7]
+// Checksum : [66e286824bbf009e7d36a59717c98cc9]
diff --git "a/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak" "b/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
index ad94683..3f19e42 100644
--- "a/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
+++ "b/mcu/make/projects/MOBILETEK2735_IVT_T800_V1\050NLWG_WIDE_TEMP_CUSTOM\051.mak"
@@ -3195,10 +3195,10 @@
HW_VER = MOBILETEK2735_IVT_T800_V1_HW
-ORIGINAL_VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P8
+ORIGINAL_VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P9
-VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P8.T800.L1.240604.241205
-CUSTOMER_LABEL = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6_MOBILETEK2735.IVT.T800.V1_P8
+VERNO = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.P9.T800.L1.240604.241205
+CUSTOMER_LABEL = MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6_MOBILETEK2735.IVT.T800.V1_P9
# *************************************************************************
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8.EDB b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8.EDB
deleted file mode 100644
index 14a4e1a..0000000
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8.EDB
+++ /dev/null
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9.EDB b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9.EDB
new file mode 100644
index 0000000..6caefb8
--- /dev/null
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9.EDB
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8.EDB.check b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8.EDB.check
deleted file mode 100644
index 369c5a6..0000000
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8.EDB.check
+++ /dev/null
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9.EDB.check b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9.EDB.check
new file mode 100644
index 0000000..1d9032b
--- /dev/null
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/_MDDB_MT2735_S00_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9.EDB.check
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
index 44378eb..af9cf3c 100755
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/dhl/database/mcddll.dll
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libdmf.a b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libdmf.a
index 6dbb5e3..c7ac495 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libdmf.a
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libdmf.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
index 8d7a9c6..84bcf64 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libl5.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnl1.a b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnl1.a
index 3e21894..9bdab91 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnl1.a
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/lib/libnl1.a
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
index 8951561..da14153 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/TARGET/modem/mipc/mipc.release.tar.gz
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8_2024_11_18_12_32 b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9_2024_11_21_20_02
similarity index 99%
rename from mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8_2024_11_18_12_32
rename to mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9_2024_11_21_20_02
index 2f43194..92e877c 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P8_2024_11_18_12_32
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/DbgInfo_DSP_CHIP10992_MOLY_NR15_R3_MD700_IVT_MP1MR3_MP_V1_6_P9_2024_11_21_20_02
Binary files differ
diff --git a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
index 6dac3c8..6d7f2e2 100644
--- a/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
+++ b/mcu/mtk_rel/MOBILETEK2735_IVT_T800_V1/NLWG_WIDE_TEMP_CUSTOM/dsp_rel/CHIP10992/DEFAULT_ASIC_TELEMATICS/final_bin/dsp.bin
Binary files differ