[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/driver/devdrv/auxadc/src/adc.c b/mcu/driver/devdrv/auxadc/src/adc.c
new file mode 100644
index 0000000..e6eb48d
--- /dev/null
+++ b/mcu/driver/devdrv/auxadc/src/adc.c
@@ -0,0 +1,1025 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2005
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * adc.c
+ *
+ * Project:
+ * --------
+ * Maui_Software
+ *
+ * Description:
+ * ------------
+ * This Module defines the auxiliary ADC driver and adaption layer.
+ *
+ * Author:
+ * -------
+ * -------
+ * -------
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+#if 0
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+#endif
+
+#include "drv_features.h"
+#include "drv_comm.h"
+#include "reg_base.h"
+#include "adc_hw.h"
+#include "adc_sw.h"
+#include "kal_public_api.h"
+#include "syscomp_config.h"
+#include "dcl.h"
+
+// For RHR ADD
+#include "adc_channel.h"
+#include "init.h"
+
+#include "nvram_struct.h"
+#include "nvram_enums.h"
+// #include "nvram_data_items.h" //violate MSBB rule, also seems to be useless
+#include "nvram_interface.h"
+#include "adc_nvram_def.h"
+
+#if !defined(DRV_ADC_OFF)
+#include "cust_temp_det_ntc_cfg.h"
+
+extern kal_bool adc_sync_mode_on;
+extern kal_uint16 adc_imm_mode_cnt;
+extern kal_uint32 adc_sche_rw_status;
+
+#define BASE_ADDR_AUXADC (0xB6F2F000)
+
+#define AUXADC_CON0 (BASE_ADDR_AUXADC + 0x000)
+#define AUXADC_CON1 (BASE_ADDR_AUXADC + 0x004)
+#define AUXADC_CON1_SET (BASE_ADDR_AUXADC + 0x008)
+#define AUXADC_CON1_CLR (BASE_ADDR_AUXADC + 0x00C)
+#define AUXADC_CON2 (BASE_ADDR_AUXADC + 0x010)
+
+#define AUXADC_DAT(n) (BASE_ADDR_AUXADC + 0x014 + (n*4))
+
+#define AUXADC_DAT0 (BASE_ADDR_AUXADC + 0x014)
+#define AUXADC_DAT1 (BASE_ADDR_AUXADC + 0x018)
+#define AUXADC_DAT2 (BASE_ADDR_AUXADC + 0x01C)
+#define AUXADC_DAT3 (BASE_ADDR_AUXADC + 0x020)
+#define AUXADC_DAT4 (BASE_ADDR_AUXADC + 0x024)
+#define AUXADC_DAT5 (BASE_ADDR_AUXADC + 0x028)
+#define AUXADC_DET_VOLT (BASE_ADDR_AUXADC + 0x084)
+#define AUXADC_DET_SEL (BASE_ADDR_AUXADC + 0x088)
+#define AUXADC_DET_PERIOD (BASE_ADDR_AUXADC + 0x08C)
+#define AUXADC_DET_DEBT (BASE_ADDR_AUXADC + 0x090)
+#define AUXADC_MISC (BASE_ADDR_AUXADC + 0x094)
+#define AUXADC_SAMPLE_LIST (BASE_ADDR_AUXADC + 0x09C)
+#define AUXADC_TST (BASE_ADDR_AUXADC + 0x0A4)
+#define AUXADC_SPL_EN (BASE_ADDR_AUXADC + 0x0B0)
+#define AUXADC_SPL_CFG0 (BASE_ADDR_AUXADC + 0x0B4)
+#define AUXADC_SPL_CFG1 (BASE_ADDR_AUXADC + 0x0B8)
+#define AUXADC_SPL_CFG2 (BASE_ADDR_AUXADC + 0x0BC)
+#define AUXADC_SADC_CON (BASE_ADDR_AUXADC + 0x300)
+
+extern const kal_uint8 ADC_VBAT;
+extern const kal_uint8 ADC_VISENSE;
+extern const kal_uint8 ADC_VCHARGER;
+
+#define ADC_AUTO_SAMPLE_MODE_EN /* to enable auto sample mode */
+
+#if 0
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+#endif
+
+adc_customized_struct adc_customized_para =
+{
+ ADC_ISENSE_FACTOR,
+ {
+ {
+#if(ADC_MAX_CHANNEL >= 1)
+ ADC_CALIBRATION_SLOPE_CH0
+#endif
+#if(ADC_MAX_CHANNEL >= 2)
+ ,ADC_CALIBRATION_SLOPE_CH1
+#endif
+#if(ADC_MAX_CHANNEL >= 3)
+ ,ADC_CALIBRATION_SLOPE_CH2
+#endif
+#if(ADC_MAX_CHANNEL >= 4)
+ ,ADC_CALIBRATION_SLOPE_CH3
+#endif
+#if(ADC_MAX_CHANNEL >= 5)
+ ,ADC_CALIBRATION_SLOPE_CH4
+#endif
+#if(ADC_MAX_CHANNEL >= 6)
+ ,ADC_CALIBRATION_SLOPE_CH5
+#endif
+ },
+ {
+#if(ADC_MAX_CHANNEL >= 1)
+ ADC_CALIBRATION_OFFSET_CH0
+#endif
+#if(ADC_MAX_CHANNEL >= 2)
+ ,ADC_CALIBRATION_OFFSET_CH1
+#endif
+#if(ADC_MAX_CHANNEL >= 3)
+ ,ADC_CALIBRATION_OFFSET_CH2
+#endif
+#if(ADC_MAX_CHANNEL >= 4)
+ ,ADC_CALIBRATION_OFFSET_CH3
+#endif
+#if(ADC_MAX_CHANNEL >= 5)
+ ,ADC_CALIBRATION_OFFSET_CH4
+#endif
+ }
+ },
+ {
+#if(ADC_MAX_CHANNEL >= 1)
+ ADC_VOLT_FACTOR_CH0
+#endif
+#if(ADC_MAX_CHANNEL >= 2)
+ ,ADC_VOLT_FACTOR_CH1
+#endif
+#if(ADC_MAX_CHANNEL >= 3)
+ ,ADC_VOLT_FACTOR_CH2
+#endif
+#if(ADC_MAX_CHANNEL >= 4)
+ ,ADC_VOLT_FACTOR_CH3
+#endif
+#if(ADC_MAX_CHANNEL >= 5)
+ ,ADC_VOLT_FACTOR_CH4
+#endif
+ }
+};
+
+typedef struct {
+ kal_uint32 Channel;
+ kal_uint32 Pull_Vdd;
+ kal_uint32 Pull_Res;
+ NTC_RT *Rt_Tbl;
+ kal_uint32 Rt_Tbl_Ent;
+} TMP_DET_SETTING;
+
+TMP_DET_SETTING auxadc_tmp_det_setting[2]; /*= {
+ {Pmic_Ntc_ADC_Chan, Pmic_Ntc_Pull_Vdd, Pmic_Ntc_Pull_Res, Pmic_Ntc_Rt_Table, Pmic_Ntc_Rt_Table_Ent},
+ {Asic_Ntc_ADC_Chan, Asic_Ntc_Pull_Vdd, Asic_Ntc_Pull_Res, Asic_Ntc_Rt_Table, Asic_Ntc_Rt_Table_Ent},
+};*/
+
+kal_uint32 auxadc_tmp_det_setting_ent = sizeof(auxadc_tmp_det_setting)/sizeof(auxadc_tmp_det_setting[0]);
+
+
+/*
+* FUNCTION
+* adc_read_calibration_data_inform
+*
+* DESCRIPTION
+* This function is to set adc calibration data from NVRAM
+*
+* CALLS
+*
+* PARAMETERS
+* lim_ptr: adc calibration data, send from NVRAM
+*
+* RETURNS
+* void
+*
+* GLOBALS AFFECTED
+* None
+*/
+void adc_read_calibration_data(void)
+{
+#if 0
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+#else
+ int i;
+
+ /* No calibration needed, so ... */
+ for (i = 0; i < ADC_MAX_CHANNEL; i++) {
+ adc_customized_para.adc_cali_param.ADCSlope[i] = 1800000/4096;
+ adc_customized_para.adc_cali_param.ADCOffset[i] = 0;
+ }
+#endif
+}
+
+
+/*
+* FUNCTION
+* ADC_GetData
+*
+* DESCRIPTION
+* This function is to run ADC, and obtain the measured data
+*
+* CALLS
+*
+* PARAMETERS
+* sel : selection of input signal source(0-4)
+*
+* RETURNS
+* return the value of ADC output
+*
+* GLOBALS AFFECTED
+* external_global
+*/
+/*must add power on function before this function*/
+#define ADC_MEA_TIMES 5
+#define ADC_MEA_TMO_MS 20 /* 16T(4~5us) per channel */
+kal_uint16 ADC_GetData(kal_uint8 chIdx)
+{
+ volatile kal_uint32 auxData[ADC_MEA_TIMES], sum = 0;
+ kal_uint32 i;
+ volatile kal_uint32 start_time;
+
+#if defined(ADC_AUTO_SAMPLE_MODE_EN)
+ for (i = 0; i < ADC_MEA_TIMES; i++) {
+ start_time = drv_get_current_time();
+ while(1)
+ {
+ /* Get ADC data */
+ auxData[i] = DRV_Reg32(AUXADC_DAT(chIdx));
+
+ /* Check if RDY bit is set */
+ if ((auxData[i] & (1 << 12))) {
+ break;
+ }
+
+ /* According to Designer's comment, RDY will be set after 16T */
+ if (drv_get_duration_ms(start_time) > ADC_MEA_TMO_MS) {
+ tst_sys_trace("Error: Wait ADC Data RDY Timeout!!!\r\n");
+ break;
+ }
+ }
+
+ auxData[i] &= ~(1<<12);
+ sum += auxData[i];
+ }
+#else
+ /* Select the ADC channel */
+ DRV_SetBits32(AUXADC_CON1, (1 << chIdx));
+
+ for (i = 0; i < ADC_MEA_TIMES; i++) {
+ /* Set the immediate mode */
+ DRV_SetBits32(AUXADC_CON1_SET, (1 << chIdx));
+
+ /* Get ADC data */
+ start_time = drv_get_current_time();
+ auxData[i] = DRV_Reg32(AUXADC_DAT(chIdx));
+ while((!(auxData[i] & (1 << 12))) && (drv_get_duration_ms(start_time) <= ADC_MEA_TMO_MS))
+ {
+ auxData[i] = DRV_Reg32(AUXADC_DAT(chIdx));
+ }
+ auxData[i] &= ~(1<<12);
+ sum += auxData[i];
+
+ /* Clear the immediate mode */
+ DRV_SetBits32(AUXADC_CON1_CLR, (1 << chIdx));
+ }
+
+ /* De-select the ADC channel */
+ DRV_ClearBits32(AUXADC_CON1, (1 << chIdx));
+#endif
+
+ sum = sum / ADC_MEA_TIMES;
+
+ dbg_print("[ADC] %s: chn = %d, result = %X\r\n", __FUNCTION__, chIdx, sum);
+ return (kal_uint16)sum;
+}
+
+/*
+* FUNCTION
+* ADC_GetMeaData
+*
+* DESCRIPTION
+* This function is to run ADC, and obtain the average value of measured data
+* Note that: This function only called before other tasks are running.
+*
+* CALLS
+*
+* PARAMETERS
+* sel : selection of input signal source(0-4)
+* meacount: measure count
+*
+* RETURNS
+* return the average value of ADC output
+*
+* GLOBALS AFFECTED
+* None
+*/
+kal_uint32 ADC_GetMeaData(kal_uint8 sel, kal_uint16 meacount)
+{
+ kal_uint32 index;
+ kal_uint32 sum = 0;
+
+ for(index = meacount; index != 0; index--)
+ {
+ sum += (kal_uint32)ADC_GetData(sel);
+ }
+
+ return sum;
+}
+
+/*
+* FUNCTION
+* ADC_GetData2Meta
+*
+* DESCRIPTION
+* This function is called by META, and return the sum value.
+*
+* CALLS
+*
+* PARAMETERS
+* sel : selection of input signal source(0-4)
+* meacount: measure count
+*
+* RETURNS
+* return the average value of ADC output
+*
+* GLOBALS AFFECTED
+* None
+*/
+kal_uint32 ADC_GetData2Meta(kal_uint8 sel, kal_uint16 meacount)
+{
+ kal_uint32 index;
+ kal_uint32 sum = 0;
+
+ for(index = meacount; index != 0; index--)
+ {
+ sum += (kal_uint32)ADC_GetData(sel);
+ }
+
+ dbg_print("[ADC] %s: %X\r\n", __FUNCTION__, sum);
+
+ return sum;
+}
+
+void ADC_Init(void)
+{
+ /* Enable source clock */
+ DRV_ClearBits32(0xB6F2D208, (1 << 0));
+
+ /* Change AUXADC from 1.5V to 1.8V */
+ DRV_WriteReg32(0xB6F2F300, DRV_Reg32(0xB6F2F300)|(1<<12));
+
+#if defined(ADC_AUTO_SAMPLE_MODE_EN)
+ /* Enable auto-sample mode */
+ DRV_WriteReg32(AUXADC_CON0, 0x3F);
+
+ /* Enable immediate mode */
+ DRV_WriteReg32(AUXADC_CON1, 0x3F);
+#endif
+
+ /* Initilize global variable */
+ auxadc_tmp_det_setting[0].Channel = Pmic_Ntc_ADC_Chan;
+ auxadc_tmp_det_setting[0].Pull_Vdd = Pmic_Ntc_Pull_Vdd;
+ auxadc_tmp_det_setting[0].Pull_Res = Pmic_Ntc_Pull_Res;
+ auxadc_tmp_det_setting[0].Rt_Tbl = Pmic_Ntc_Rt_Table;
+ auxadc_tmp_det_setting[0].Rt_Tbl_Ent= Pmic_Ntc_Rt_Table_Ent;
+
+ auxadc_tmp_det_setting[1].Channel = Asic_Ntc_ADC_Chan;
+ auxadc_tmp_det_setting[1].Pull_Vdd = Asic_Ntc_Pull_Vdd;
+ auxadc_tmp_det_setting[1].Pull_Res = Asic_Ntc_Pull_Res;
+ auxadc_tmp_det_setting[1].Rt_Tbl = Asic_Ntc_Rt_Table;
+ auxadc_tmp_det_setting[1].Rt_Tbl_Ent= Asic_Ntc_Rt_Table_Ent;
+}
+
+/*
+* FUNCTION
+* adc_adc2vol
+*
+* DESCRIPTION
+* This function is to translate ADC value to voltage.(uV)
+*
+* CALLS
+*
+* PARAMETERS
+* chann: ADC channel.
+* adcVoltage: ADC value
+*
+* RETURNS
+* voltage value(uV)
+*
+* GLOBALS AFFECTED
+* None
+*/
+kal_int32 adc_adc2vol(kal_uint8 chann, double adcVoltage)
+{
+ double result;
+
+ if(chann >= ADC_MAX_CHANNEL)
+ ASSERT(0);
+
+ /* Need get the Adc voltage firstly, or does the cali-data contain the conversion ??? */
+
+ /* Do Calibration */
+ result = (double)((adcVoltage*(double)adc_customized_para.adc_cali_param.ADCSlope[chann]) +
+ (double)adc_customized_para.adc_cali_param.ADCOffset[chann]);
+
+ return (kal_int32)result;
+ //return (kal_int32)(result/PMIC_ADC_FACTOR_VBAT*volt_factor);
+}
+
+/*
+* FUNCTION
+* adc_measureVoltage
+*
+* DESCRIPTION
+* This function is to measure voltage of specific channel
+*
+* CALLS
+* Call this API after Drv_Init_Phase1() -->Drv_Customize_Init() --> Finish adc_customized_para initial
+*
+* PARAMETERS
+* chann: ADC channel.
+*
+* RETURNS
+* voltage value(uV)
+*
+* GLOBALS AFFECTED
+* None
+*/
+kal_int32 adc_measureVoltage(kal_uint8 chann, double *adc_value)
+{
+ *adc_value = (double)ADC_GetData(chann);
+ return adc_adc2vol(chann, *adc_value);
+}
+
+/*
+* FUNCTION
+* ADC_Volt2Temp
+*
+* DESCRIPTION
+* This function is to translate voltage to temperatrure
+*
+* CALLS
+*
+* PARAMETERS
+* chIdx : AUXADC Channel
+* uVolt : Calibrated Voltage Value, unit (uV)
+*
+* RETURNS
+* temperature(m'C)
+*
+* GLOBALS AFFECTED
+* None
+*/
+kal_int32 ADC_Volt2Temp(kal_uint8 chIdx, kal_uint32 uVolt)
+{
+ TMP_DET_SETTING *setting = (TMP_DET_SETTING *)NULL;
+ NTC_RT *rt1 = (NTC_RT *)NULL;
+ NTC_RT *rt2 = (NTC_RT *)NULL;
+ double slope;
+ double ntc_res;
+ kal_int32 ntc_tmp = 0;
+ int i;
+
+ for (i = 0; i < auxadc_tmp_det_setting_ent; i++) {
+ setting = &auxadc_tmp_det_setting[i];
+ if (setting->Channel == chIdx)
+ break;
+ }
+
+ if (i == auxadc_tmp_det_setting_ent) {
+ /* No setting found */
+ return 0;
+ }
+
+ ASSERT(uVolt <= setting->Pull_Vdd);
+
+ if (uVolt < setting->Pull_Vdd) {
+ ntc_res = ((double)uVolt)*setting->Pull_Res/(setting->Pull_Vdd-uVolt);
+ } else {
+ /* pull up too small, or temperature too low */
+ ntc_res = (double)0x0FFFFFFF; /* 268M ohm */
+ }
+
+ ASSERT(setting->Rt_Tbl_Ent >= 2);
+
+ for (i = 0; i < setting->Rt_Tbl_Ent-1; i++) {
+ rt1 = &setting->Rt_Tbl[i]; /* lower temp, bigger res */
+ rt2 = &setting->Rt_Tbl[i+1]; /* higher temp, smaller res */
+
+ if (ntc_res >= rt1->uRes) /* temp too low */
+ break;
+
+ if (rt2->uRes <= ntc_res) /* temp in range */
+ break;
+ }
+
+ ASSERT(rt2->iTemp > rt1->iTemp);
+ ASSERT(rt1->uRes > rt2->uRes);
+
+ /* slope should be negative */
+ slope = ((double)(rt1->iTemp - rt2->iTemp)) / ((double)(rt1->uRes - rt2->uRes));
+
+ ntc_tmp = rt2->iTemp*1000 + (kal_int32)(slope*(ntc_res - rt2->uRes)*1000);
+
+ return ntc_tmp;
+}
+
+
+/*
+* FUNCTION
+* ADC_GetImmTemp
+*
+* DESCRIPTION
+* This function is to get immediate temperature of specific channel
+*
+* CALLS
+* adc_measureVoltage
+* adc_Volt2Temp
+*
+* PARAMETERS
+* chann: ADC channel.
+*
+* RETURNS
+* immediate temperature(C)
+*
+* GLOBALS AFFECTED
+* None
+*/
+kal_int16 ADC_GetImmTemp(kal_uint8 chann)
+{
+ double adc_value;
+ kal_uint32 uVolt;
+
+
+ ASSERT(chann < ADC_MAX_CHANNEL);
+
+ uVolt = adc_measureVoltage(chann, &adc_value);
+
+ return ADC_Volt2Temp(chann, uVolt)/1000;
+}
+
+
+/*
+* FUNCTION
+* ADC_GetPhysicalChannel
+*
+* DESCRIPTION
+* This function is to get physical AUXADC Channel ID
+*
+* CALLS
+*
+*
+* PARAMETERS
+* adcname: ADC channel name.
+*
+* RETURNS
+* <0 means error
+* >=0 means AUXADC Channel ID
+*
+* GLOBALS AFFECTED
+* None
+*/
+kal_int16 ADC_GetPhysicalChannel(kal_uint16 adcname)
+{
+ kal_int16 iPhyChan = -1;
+
+ if (adcname == DCL_MDTMP_ADC_CHANNEL) {
+ iPhyChan = Asic_Ntc_ADC_Chan;
+ } else if (adcname == DCL_PMICTMP_ADC_CHANNEL) {
+ iPhyChan = Pmic_Ntc_ADC_Chan;
+ } else {
+ iPhyChan = -1;
+ //ASSERT(0);
+ }
+
+ return iPhyChan;
+}
+
+#else /* !defined(DRV_ADC_OFF) */
+
+#endif
+