[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/interface/driver/peripheral/alerter_sw.h b/mcu/interface/driver/peripheral/alerter_sw.h
new file mode 100644
index 0000000..e963b62
--- /dev/null
+++ b/mcu/interface/driver/peripheral/alerter_sw.h
@@ -0,0 +1,238 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2005
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * alerter_sw.h
+ *
+ * Project:
+ * --------
+ * Maui_Software
+ *
+ * Description:
+ * ------------
+ * This file is intended for alerter driver and melody adaption.
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+#ifndef ALERTER_SW_H
+#define ALERTER_SW_H
+#include "dcl.h"
+/*
+* The output of Alerter has to sources:
+* one is the enhanced pwm output signal,which is implemented embedded in Alerter module;
+* the other is PDM signal from DSP domain directly.
+*/
+#define pwm 0
+#define pdm 1
+
+/*Select PWM Waveform clock*/
+typedef enum
+{
+ c13_1MHZ, /*13M Hz*/
+ c13_2MHZ, /*13/2M Hz*/
+ c13_4MHZ, /*13/4M Hz*/
+ c13_8MHZ /*13/8M Hz*/
+}ALClock;
+/*
+* select Alerter mode
+* In mode 1, the polarity of alerter output signal according to the relationship between internal counter1 and the programmed threshold will be inverted each time internal
+* counter2 reaches zero.
+*
+* In mode2, each time the internal counter2 count backwards to zero the alerter output signal is normal
+* pwm signal (i.e. signal is low as long as the internal counter1 value is greater than or equals to ALERTER_THRES, and it
+* is high when the internal counter1 is less than ALERTER_THRES) or low state by turns.
+
+* In mode3, the value of internal counter2 has no effect on output signal, i.e. the alerter output signal is low as long as the internal counter1 value is above
+* the programmed threshold and is high the internal counter1 is less than ALERTER_THRES when no matter what value the
+* internal counter2 is.
+*/
+typedef enum
+{
+ m1, /*Mode 1 select*/
+ m2, /*Mode 2 select*/
+ m3 /*Mode 3 select*/
+}ALMode;
+
+typedef void (*DCL_ALERTER_CONFIGURE)(kal_uint32 freq, kal_uint8 duty);
+typedef void (*DCL_ALERTER_START)(void);
+typedef void (*DCL_ALERTER_STOP)(void);
+typedef void (*DCL_ALERTER_PWROPEN)(kal_bool ENABLE);
+typedef void (*DCL_ALERTER_OUTPUT)(kal_uint8 outtype);
+typedef void (*DCL_ALERTER_PLAYALTERNOTES)(kal_bool (*GetNotecallbac)(BuzNoteStruct *Buz), void (*endofAlter)(void));
+typedef void (*DCL_ALERTER_STOPALERTERNOTES)(void);
+typedef void (*DCL_ALERTER_SETBUZVOLUME)(kal_uint8 volumn);
+typedef void (*DCL_ALERTER_CONFIG)(ALMode mode, ALClock Clock);
+typedef void (*DCL_ALERTER_GETCURRENT_LEVEL)(void);
+
+typedef struct
+{
+ DCL_ALERTER_CONFIGURE configure;
+ DCL_ALERTER_START start;
+ DCL_ALERTER_STOP stop;
+ DCL_ALERTER_PWROPEN pwropen;
+ DCL_ALERTER_OUTPUT output;
+ DCL_ALERTER_PLAYALTERNOTES playnotes;
+ DCL_ALERTER_STOPALERTERNOTES stopnotes;
+ DCL_ALERTER_SETBUZVOLUME setbuzvolume;
+ DCL_ALERTER_GETCURRENT_LEVEL getlevel;
+}AlerterDriver_t;
+
+extern void ALERTER_Output(kal_uint8 outtype);
+extern void PlayAlterNotes(kal_bool (*GetNotecallbac)(BuzNoteStruct *Buz), void (*endofAlter)(void));
+extern void StopAlterNotes(void);
+extern void SetBuzVolume(kal_uint8 volumn);
+extern void ALERTER_Config(ALMode mode, ALClock Clock);
+
+
+// MoDIS parser skip start
+// The following APIs are implemented in other dummy API files
+extern void Alter_Configure(kal_uint32 freq, kal_uint8 duty);
+extern void Alter_Start(void);
+extern void Alter_Stop(void);
+extern void ALERTER_PWROPEN(kal_bool ENABLE);
+// MoDIS parser skip end
+
+#if defined(__DRV_COMM_REG_DBG__) && defined(__DRV_ALERTER_REG_DBG__)
+#define DRV_ALERTER_WriteReg(addr,data) DRV_DBG_WriteReg(addr,data)
+#define DRV_ALERTER_Reg(addr) DRV_DBG_Reg(addr)
+#define DRV_ALERTER_WriteReg32(addr,data) DRV_DBG_WriteReg32(addr,data)
+#define DRV_ALERTER_Reg32(addr) DRV_DBG_Reg32(addr)
+#define DRV_ALERTER_WriteReg8(addr,data) DRV_DBG_WriteReg8(addr,data)
+#define DRV_ALERTER_Reg8(addr) DRV_DBG_Reg8(addr)
+#define DRV_ALERTER_ClearBits(addr,data) DRV_DBG_ClearBits(addr,data)
+#define DRV_ALERTER_SetBits(addr,data) DRV_DBG_SetBits(addr,data)
+#define DRV_ALERTER_SetData(addr, bitmask, value) DRV_DBG_SetData(addr, bitmask, value)
+#define DRV_ALERTER_ClearBits32(addr,data) DRV_DBG_ClearBits32(addr,data)
+#define DRV_ALERTER_SetBits32(addr,data) DRV_DBG_SetBits32(addr,data)
+#define DRV_ALERTER_SetData32(addr, bitmask, value) DRV_DBG_SetData32(addr, bitmask, value)
+#define DRV_ALERTER_ClearBits8(addr,data) DRV_DBG_ClearBits8(addr,data)
+#define DRV_ALERTER_SetBits8(addr,data) DRV_DBG_SetBits8(addr,data)
+#define DRV_ALERTER_SetData8(addr, bitmask, value) DRV_DBG_SetData8(addr, bitmask, value)
+#else
+#define DRV_ALERTER_WriteReg(addr,data) DRV_WriteReg(addr,data)
+#define DRV_ALERTER_Reg(addr) DRV_Reg(addr)
+#define DRV_ALERTER_WriteReg32(addr,data) DRV_WriteReg32(addr,data)
+#define DRV_ALERTER_Reg32(addr) DRV_Reg32(addr)
+#define DRV_ALERTER_WriteReg8(addr,data) DRV_WriteReg8(addr,data)
+#define DRV_ALERTER_Reg8(addr) DRV_Reg8(addr)
+#define DRV_ALERTER_ClearBits(addr,data) DRV_ClearBits(addr,data)
+#define DRV_ALERTER_SetBits(addr,data) DRV_SetBits(addr,data)
+#define DRV_ALERTER_SetData(addr, bitmask, value) DRV_SetData(addr, bitmask, value)
+#define DRV_ALERTER_ClearBits32(addr,data) DRV_ClearBits32(addr,data)
+#define DRV_ALERTER_SetBits32(addr,data) DRV_SetBits32(addr,data)
+#define DRV_ALERTER_SetData32(addr, bitmask, value) DRV_SetData32(addr, bitmask, value)
+#define DRV_ALERTER_ClearBits8(addr,data) DRV_ClearBits8(addr,data)
+#define DRV_ALERTER_SetBits8(addr,data) DRV_SetBits8(addr,data)
+#define DRV_ALERTER_SetData8(addr, bitmask, value) DRV_SetData8(addr, bitmask, value)
+#endif //#if defined(__DRV_COMM_REG_DBG__) && defined(__DRV_ALERTER_REG_DBG__)
+#endif
+