[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/interface/driver/peripheral/dcl_idc.h b/mcu/interface/driver/peripheral/dcl_idc.h
new file mode 100644
index 0000000..5ba9ad7
--- /dev/null
+++ b/mcu/interface/driver/peripheral/dcl_idc.h
@@ -0,0 +1,785 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2010
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * dcl_idc.h
+ *
+ * Project:
+ * --------
+ * MOLY_Software
+ *
+ * Description:
+ * ------------
+ * Header file of DCL (Driver Common Layer) for IDC.
+ *
+ * Author:
+ * -------
+ *
+ * Ansel Liao
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+
+#ifdef DCL_DEFINITION_STRUCT
+#ifndef __DCL_IDC_H_STRUCT__
+#define __DCL_IDC_H_STRUCT__
+
+#include "kal_general_types.h"
+
+#define MAX_NUM_BYTE 9
+#ifdef ATEST_DRV_ENABLE
+#define MAX_NUM_EVENT 16
+#else /*ATEST_DRV_ENABLE*/
+#define MAX_NUM_EVENT 1
+#endif
+
+
+#if defined(__MD93__)
+ typedef void (*IDC_DRV_TO_EL1_CALLBACK)(kal_bool data);
+#elif defined(__MD95__) || defined(__MD97__) || defined(__MD97P__)
+ typedef void (*IDC_DRV_TO_EL1_CALLBACK)(void *data);
+#endif
+
+
+/*******************************************************************************
+ * DCL_OPTIONS for IDC
+ *******************************************************************************/
+#define IDC_OPTIONS
+
+
+/*******************************************************************************
+ * DCL_CONFIGURE_T for IDC
+ *******************************************************************************/
+#define IDC_CONFIGS
+
+
+/*******************************************************************************
+ * DCL_EVENT for IDC
+ *******************************************************************************/
+#define IDC_EVENTS
+
+
+/*******************************************************************************
+ * DCL_CTRL_CMD for IDC
+ *******************************************************************************/
+/* The IDC Command Values in DCL_CTRL_CMD_T Enum of dcl.h */
+#ifdef __BUILD_DOM__
+typedef enum {
+ IDC_CMD_SET_DCB_CONFIG,
+ IDC_CMD_GET_DCB_CONFIG,
+ IDC_CMD_SET_BAUDRATE,
+ IDC_CMD_GET_MAX_BAUDRATE,
+ IDC_CMD_SET_FIFO_TRIGGER,
+ IDC_CMD_SET_PM_CONFIG,
+ IDC_CMD_GET_PM_CONFIG,
+ IDC_CMD_SEND_EVENT,
+ IDC_CMD_SCHEDULE_EVENT,
+ IDC_CMD_SCHEDULE_GPS_BLANK_EVENT,
+ IDC_CMD_SCHEDULE_GPS_L1_L5_BLANK_EVENT,
+ IDC_CMD_SCHEDULE_UPDATE,
+ IDC_CMD_PURGE,
+ IDC_CMD_CHECK_EVENT_SEND_OUT,
+ IDC_CMD_SET_PIN_CONFIG,
+ IDC_CMD_GET_PIN_CONFIG,
+ IDC_CMD_REGISTER_PM_CALLBACK,
+ IDC_CMD_UNREGISTER_PM_CALLBACK,
+ IDC_CMD_SET_NEW_PM_CONFIG,
+ IDC_CMD_GET_NEW_PM_CONFIG,
+ IDC_CMD_STOP_EVENT,
+ IDC_CMD_GET_SCHEDULE_STATUS,
+ IDC_CMD_GET_SCHEDULE_STATUS_2,
+ IDC_CMD_FORCE_ON_RF,
+ IDC_CMD_REMAPPING_CONFIG,
+ IDC_CMD_AUTO_TX_CONFIG,
+ IDC_CMD_AUTO_TX_EN,
+ IDC_CMD_SCHEDULE_UPDATE_N_RETRUN_RFTX,
+ IDC_CMD_SCHEDULE_EVENT_LTE_NR,
+ IDC_CMD_ENABLE_RAT,
+ IDC_CMD_DISABLE_RAT,
+ IDC_CMD_SLEEP_NOTIFY,
+ IDC_CMD_WAKE_NOTIFY,
+ IDC_CMD_SET_ILM,
+ IDC_CMD_GPS_B13_B14,
+} DCL_CTRL_CMD_T;
+#else // __BUILD_DOM__
+#define IDC_CMDS \
+ IDC_CMD_SET_DCB_CONFIG, \
+ IDC_CMD_GET_DCB_CONFIG, \
+ IDC_CMD_SET_BAUDRATE, \
+ IDC_CMD_GET_MAX_BAUDRATE, \
+ IDC_CMD_SET_FIFO_TRIGGER, \
+ IDC_CMD_SET_PM_CONFIG, \
+ IDC_CMD_GET_PM_CONFIG, \
+ IDC_CMD_SEND_EVENT, \
+ IDC_CMD_SCHEDULE_EVENT, \
+ IDC_CMD_SCHEDULE_GPS_BLANK_EVENT, \
+ IDC_CMD_SCHEDULE_GPS_L1_L5_BLANK_EVENT, \
+ IDC_CMD_SCHEDULE_UPDATE, \
+ IDC_CMD_PURGE, \
+ IDC_CMD_CHECK_EVENT_SEND_OUT, \
+ IDC_CMD_SET_PIN_CONFIG, \
+ IDC_CMD_GET_PIN_CONFIG, \
+ IDC_CMD_REGISTER_PM_CALLBACK, \
+ IDC_CMD_UNREGISTER_PM_CALLBACK, \
+ IDC_CMD_SET_NEW_PM_CONFIG, \
+ IDC_CMD_GET_NEW_PM_CONFIG, \
+ IDC_CMD_STOP_EVENT, \
+ IDC_CMD_GET_SCHEDULE_STATUS, \
+ IDC_CMD_GET_SCHEDULE_STATUS_2, \
+ IDC_CMD_FORCE_ON_RF, \
+ IDC_CMD_REMAPPING_CONFIG, \
+ IDC_CMD_AUTO_TX_CONFIG, \
+ IDC_CMD_AUTO_TX_EN, \
+ IDC_CMD_SCHEDULE_UPDATE_N_RETRUN_RFTX, \
+ IDC_CMD_SCHEDULE_EVENT_LTE_NR, \
+ IDC_CMD_ENABLE_RAT, \
+ IDC_CMD_DISABLE_RAT, \
+ IDC_CMD_SLEEP_NOTIFY, \
+ IDC_CMD_WAKE_NOTIFY, \
+ IDC_CMD_SET_ILM, \
+ IDC_CMD_GPS_B13_B14,
+#endif // __BUILD_DOM__
+
+
+/*******************************************************************************
+ * DCL_CTRL_DATA_T: Define the Control data structure for each module's command
+ *******************************************************************************/
+// For DclIDC_Initialize
+typedef enum
+{
+ IDC_INIT,
+ IDC_REINIT,
+ IDC_UART_ACTIVATE,
+} IDC_INIT_TYPE_T;
+
+// For IDC_CMD_SET_DCB_CONFIG command
+// For IDC_CMD_GET_DCB_CONFIG command
+typedef struct
+{
+ kal_uint32 u4Baud; // baudrate
+ kal_uint8 u1DataBits; // UART_BITS_PER_CHAR_T
+ kal_uint8 u1StopBits; // UART_STOP_BITS_T
+ kal_uint8 u1Parity; // UART_PARTIY_T
+} IDC_CTRL_DCB_CONFIG_T;
+
+// For IDC_CMD_SET_BAUDRATE command
+// For IDC_CMD_GET_MAX_BAUDRATE command
+typedef struct
+{
+ kal_uint32 baudrate; // baudrate
+} IDC_CTRL_BAUDRATE_T;
+
+// For IDC_CMD_SET_FIFO_TRIGGER command
+typedef struct
+{
+ kal_uint8 rx_threshold; // threshold of RX FIFO
+} IDC_CTRL_SET_FIFO_TRIGGER_T;
+
+// For IDC_CMD_SET_PM_CONFIG command
+// For IDC_CMD_GET_PM_CONFIG command
+typedef struct
+{
+ kal_uint8 pm_idx; // Pattern match index
+ kal_uint8 priority; // Priority
+ kal_uint8 priority_bit_en;// Priority bit enable
+ kal_uint8 pattern; // Pattern
+ kal_uint8 pattern_bit_en; // Pattern bit enable
+} IDC_CTRL_PM_CONFIG_T;
+
+// For IDC_CMD_SET_NEW_PM_CONFIG command
+// For IDC_CMD_GET_NEW_PM_CONFIG command
+typedef struct
+{
+ kal_uint8 pattern0; // Pattern 0
+ kal_uint8 pattern1; // Pattern 1
+} IDC_CTRL_NEW_PM_CONFIG_T;
+
+// For IDC_REGISTER_PM_CALLBACK command
+// For IDC_UNREGISTER_PM_CALLBACK command
+typedef struct
+{
+ kal_uint8 pm_idx; // Pattern match index , 0~3 : old PM, 4: new PM
+ IDC_DRV_TO_EL1_CALLBACK func_ptr; // Callback function
+#if defined(__MD93__)
+ kal_bool private_data;// Private data
+#elif defined(__MD95__) || defined(__MD97__) || defined(__MD97P__)
+ void *private_data;// old PM -> kal_bool, new PM -> kal_uint16
+#endif
+} IDC_CTRL_PM_CALLBACK_T;
+
+
+// For IDC_CMD_SCHEDULE_EVENT command
+typedef struct
+{
+#if defined(__MD93__)
+ kal_uint8 data[2];
+#elif defined(__MD95__) || defined(__MD97__) || defined(__MD97P__)
+ kal_uint8 num; // number of byte in the event
+ kal_uint8 data[MAX_NUM_BYTE]; // 2~9 byte data per event
+#endif
+ kal_uint32 offset; // 97: 1000 = 1 ms, can be set up to 10000 (= 10 ms) *** 95: 61440 = 1 ms, can be set up to 614400 (= 10 ms)
+} IDC_EVENT_T;
+
+typedef struct
+{
+ kal_uint8 cmd_type;
+ kal_uint8 cmd_sub_type;
+ kal_uint32 cmd_phytime;
+ kal_uint8 event_type;
+} IDC_CTRL_DROP_CMD_T;
+
+typedef struct
+{
+ IDC_EVENT_T schedule_event; // event columns
+ kal_bool sleep_mode; // Use KAL_TRUE to lock resource
+ kal_bool gps_mode; // Use KAL_TRUE to notify gps to blank
+ IDC_CTRL_DROP_CMD_T *drop_cmd; // drop_cmd structure for DRV_IDC fill in if drop behavior occurs
+} IDC_CTRL_SCHEDULE_EVENT_T;
+
+typedef struct
+{
+ kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1
+ kal_uint8 raw_data; // L1: bit[0], L5:bit[1], if value = 0x0 : gps_off, value = 0x1 : gps_on
+ kal_uint32 frc_time; //1000 = 1 ms, can be set up to 10000 (= 10 ms)
+} IDC_CTRL_GPS_L1_L5_BLANK_EVENT_T;
+
+typedef struct
+{
+ kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1
+ kal_bool gps_mode; // Using KAL_TRUE to ON GPS blank,KAL_FALSE to OFF GPS blank
+ kal_uint32 frc_time; //1000 = 1 ms, can be set up to 10000 (= 10 ms)
+} IDC_CTRL_GPS_SINGLE_BLANK_EVENT_T;
+
+
+// For IDC_CMD_SCHEDULE_UPDATE command
+typedef struct
+{
+ kal_uint32 phy_time_set; // According to sub frame boundary, range = 0 ~ 61440*n (n: last sub frame boundary, 61440 = 1ms)
+} IDC_CTRL_SCHEDULE_UPDATE_T;
+
+// For IDC_CMD_STOP_EVENT command
+typedef struct
+{
+ kal_uint32 bitmap; // events need to be stopped
+} IDC_CTRL_STOP_EVENT_T;
+
+// For IDC_CMD_PURGE
+typedef struct
+{
+ UART_buffer dir;
+} IDC_CTRL_PURGE_T;
+
+// For IDC_CMD_GET_SCHEDULE_STATUS
+typedef struct
+{
+ kal_uint32 schedule_status; // (bitmap)
+} IDC_CTRL_GET_SCHEDULE_STATUS_T;
+
+// For IDC_CMD_CHECK_EVENT_SEND_OUT
+typedef struct
+{
+ kal_bool send_out; // all events are sent out
+} IDC_CTRL_CHECK_EVENT_SEND_OUT_T;
+
+// For IDC_CMD_SET_PIN_CONFIG
+typedef enum
+{
+ IDC_INTERNAL_PIN,
+ IDC_EXTERNAL_PIN,
+} IDC_PIN_MODE_T;
+
+typedef struct
+{
+ IDC_PIN_MODE_T pin_mode;
+} IDC_CTRL_PIN_CONFIG_T;
+
+typedef struct
+{
+ kal_uint8 rf_path; // 0: rf path 0, 1: rf path 1
+} IDC_CTRL_RF_PATH_T;
+
+typedef struct
+{
+ kal_uint8 remapping_table; // remapping table config
+ kal_uint8 remapping_table_en; // remapping table enable
+} IDC_CTRL_REMAPPING_CONFIG_T;
+
+typedef struct
+{
+ kal_uint8 tx_susp_quota; // it count down when receive REVOKE IDC_CMD, usually set 30ms, 1ms per unit
+ kal_uint8 reset_quota; // it count down when start auto tx system, usually set 200ms, 1ms per unit
+} IDC_AUTO_TX_CONFIG_T;
+
+typedef struct
+{
+ kal_bool auto_tx_en; // KAL_TRUE : auto tx on, KAL_FALSE : auto tx off
+} IDC_AUTO_TX_EN_T;
+
+// For IDC_CMD_SCHEDULE_UPDATE_N_RETRUN_RFTX command
+typedef struct
+{
+ kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1
+
+} IDC_RAT_T;
+typedef struct
+{
+ kal_bool ilm_mode; // 0 : ILM_DISABLE, 1 : ILM_ENABLE
+
+} IDC_ILM_T;
+typedef struct
+{
+ kal_uint8 rat_status; // rat_lte = 0, rat_nr = 1
+ kal_uint16 raw_data; // rat_lte: bit[0:1], rat_nr:bit[2]
+} IDC_GPS_B13_B14_T;
+
+typedef struct
+{
+ kal_uint32 frc_time_set; // According to sub frame boundary, range = 0 ~ 1000*n (n: last sub frame boundary, 1000 = 1ms)
+ kal_uint8 rf_path_status; // returns RF status to MD_IDC
+
+} IDC_CTRL_SCHEDULE_UPDATE_N_RETRUN_RFTX_T;
+
+typedef struct
+{
+ IDC_EVENT_T schedule_event; // event columns
+ kal_bool sleep_mode; // Use KAL_TRUE to lock resource
+ kal_uint8 event_type; // LTE/NR/Common
+ IDC_CTRL_DROP_CMD_T *drop_cmd; // drop_cmd structure for DRV_IDC fill in if drop behavior occurs
+} IDC_CTRL_SCHEDULE_EVENT_LTE_NR_T;
+
+/* The IDC Command Parameter Data Structure for Each Command in DCL_CTRL_DATA_T Enum of dcl.h */
+#ifdef __BUILD_DOM__
+typedef union
+{
+ IDC_CTRL_DCB_CONFIG_T r_idc_ctrl_dcb_config; // Data Structure for IDC_CMD_SET_DCB_CONFIG, IDC_CMD_GET_DCB_CONFIG
+ IDC_CTRL_BAUDRATE_T r_idc_ctrl_baudrate; // Data Structure for IDC_CMD_SET_BAUDRATE, IDC_CMD_GET_MAX_BAUDRATE
+ IDC_CTRL_SET_FIFO_TRIGGER_T r_idc_ctrl_set_fifo_trigger; // Data Structure for IDC_CMD_SET_FIFO_TRIGGER
+ IDC_CTRL_PM_CONFIG_T r_idc_ctrl_pm_config; // Data Structure for IDC_CMD_SET_PM_CONFIG, IDC_CMD_GET_PM_CONFIG
+ IDC_CTRL_NEW_PM_CONFIG_T r_idc_ctrl_new_pm_config; // Data Structure for IDC_CMD_SET_NEW_PM_CONFIG, IDC_CMD_GET_NEW_PM_CONFIG
+ IDC_CTRL_SCHEDULE_EVENT_T r_idc_ctrl_schedule_event; // Data Structure for IDC_CMD_SCHEDULE_EVENT
+ IDC_CTRL_GPS_SINGLE_BLANK_EVENT_T r_idc_ctrl_gps_single_blank_event; // Data Structure for IDC_CMD_GPS_SINGLE_BLANK_EVENT
+ IDC_CTRL_GPS_L1_L5_BLANK_EVENT_T r_idc_ctrl_gps_l1_l5_blank_event; // Data Structure for IDC_CMD_GPS_L1_L5_BLANK_EVENT
+ IDC_CTRL_SCHEDULE_UPDATE_T r_idc_ctrl_schedule_start; // Data Structure for IDC_CMD_SCHEDULE_EVENT
+ IDC_CTRL_STOP_EVENT_T r_idc_ctrl_stop_event; // Data Structure for IDC_CMD_STOP_EVENT
+ IDC_CTRL_PURGE_T r_idc_ctrl_purge; // Data Structure for IDC_CMD_PURGE
+ IDC_CTRL_GET_SCHEDULE_STATUS_T r_idc_ctrl_get_schedule_status; // Data Structure for IDC_CMD_GET_SCHEDULE_STATUS
+ IDC_CTRL_CHECK_EVENT_SEND_OUT_T r_idc_ctrl_check_event_send_out; // Data Structure for IDC_CMD_CHECK_EVENT_SEND_OUT
+ IDC_CTRL_PIN_CONFIG_T r_idc_ctrl_pin_config; // Data Structure for IDC_CTRL_PIN_CONFIG_T
+ IDC_CTRL_PM_CALLBACK_T r_idc_ctrl_pm_callback;
+ IDC_CTRL_RF_PATH_T r_idc_ctrl_rf_path;
+ IDC_CTRL_REMAPPING_CONFIG_T r_idc_ctrl_remapping_config;
+ IDC_AUTO_TX_CONFIG_T r_idc_ctrl_auto_tx_config;
+ IDC_AUTO_TX_EN_T r_idc_ctrl_auto_tx_en;
+ IDC_CTRL_SCHEDULE_UPDATE_N_RETRUN_RFTX_T r_idc_ctrl_schedule_update_n_return_rftx;
+ IDC_CTRL_SCHEDULE_EVENT_LTE_NR_T r_idc_ctrl_schedule_event_lte_nr;
+ IDC_RAT_T r_idc_ctrl_rat_status;
+ IDC_ILM_T r_idc_ctrl_ilm_mode;
+ IDC_GPS_B13_B14_T r_idc_ctrl_gps_b13_b14_mode;
+} DCL_CTRL_DATA_T;
+#else /* __BUILD_DOM__ */
+#define IDC_CTRLS \
+ IDC_CTRL_DCB_CONFIG_T r_idc_ctrl_dcb_config; \
+ IDC_CTRL_BAUDRATE_T r_idc_ctrl_baudrate; \
+ IDC_CTRL_SET_FIFO_TRIGGER_T r_idc_ctrl_set_fifo_trigger; \
+ IDC_CTRL_PM_CONFIG_T r_idc_ctrl_pm_config; \
+ IDC_CTRL_SCHEDULE_EVENT_T r_idc_ctrl_schedule_event; \
+ IDC_CTRL_GPS_SINGLE_BLANK_EVENT_T r_idc_ctrl_gps_single_blank_event; \
+ IDC_CTRL_GPS_L1_L5_BLANK_EVENT_T r_idc_ctrl_gps_l1_l5_blank_event; \
+ IDC_CTRL_SCHEDULE_UPDATE_T r_idc_ctrl_schedule_start; \
+ IDC_CTRL_STOP_EVENT_T r_idc_ctrl_stop_event; \
+ IDC_CTRL_PURGE_T r_idc_ctrl_purge; \
+ IDC_CTRL_GET_SCHEDULE_STATUS_T r_idc_ctrl_get_schedule_status; \
+ IDC_CTRL_CHECK_EVENT_SEND_OUT_T r_idc_ctrl_check_event_send_out; \
+ IDC_CTRL_PIN_CONFIG_T r_idc_ctrl_pin_config; \
+ IDC_CTRL_PM_CALLBACK_T r_idc_ctrl_pm_callback; \
+ IDC_CTRL_NEW_PM_CONFIG_T r_idc_ctrl_new_pm_config; \
+ IDC_CTRL_RF_PATH_T r_idc_ctrl_rf_path; \
+ IDC_CTRL_REMAPPING_CONFIG_T r_idc_ctrl_remapping_config; \
+ IDC_AUTO_TX_CONFIG_T r_idc_ctrl_auto_tx_config; \
+ IDC_AUTO_TX_EN_T r_idc_ctrl_auto_tx_en; \
+ IDC_CTRL_SCHEDULE_UPDATE_N_RETRUN_RFTX_T r_idc_ctrl_schedule_update_n_return_rftx; \
+ IDC_CTRL_SCHEDULE_EVENT_LTE_NR_T r_idc_ctrl_schedule_event_lte_nr; \
+ IDC_RAT_T r_idc_ctrl_rat_status; \
+ IDC_ILM_T r_idc_ctrl_ilm_mode; \
+ IDC_GPS_B13_B14_T r_idc_ctrl_gps_b13_b14_mode;
+#endif /* __BUILD_DOM__ */
+
+// Support list of IDC driver
+typedef struct
+{
+ kal_bool idc;
+ kal_bool gpio;
+ kal_bool uart;
+} IDC_SUPPORT_T;
+
+#endif // #ifndef __DCL_IDC_H_STRUCT__
+#endif // #ifdef DCL_DEFINITION_STRUCT
+
+#ifdef DCL_DEFINITION_PROTOTYPE
+#ifndef __DCL_IDC_H_PROTOTYPE__
+#define __DCL_IDC_H_PROTOTYPE__
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_GetSupport
+*
+* DESCRIPTION
+* This function is to get the support list of IDC driver.
+*
+* PARAMETERS
+* support: [IN] IDC_SUPPORT_T *support
+* 1. idc: Indicate whether or not idc driver is supported
+* 2. gpio: Indicate whether or not GPIO Co-Exist will be used after idc_init
+* 3. uart: Indicate whether or not UART will be used after idc_init
+*
+* RETURNS
+* Return the support list
+*
+* RETURN VALUES
+* STATUS_OK
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_GetSupport(IDC_SUPPORT_T *support);
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_Initialize
+*
+* DESCRIPTION
+* This function is to initialize IDC module
+*
+* RETURNS
+* Return the status of DclIDC_Initialize
+*
+* RETURN VALUES
+* STATUS_OK: Initialize Finished
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_Initialize(IDC_INIT_TYPE_T type);
+
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_Open
+*
+* DESCRIPTION
+* This function is to open the IDC module and return a handle
+*
+* PARAMETERS
+* dev: [IN] Only valid for DCL_IDC
+* flags: [IN] No sepcial flags is needed. Please use FLAGS_NONE
+*
+* RETURNS
+* Return DCL_HANDLE of IDC
+*
+* RETURN VALUES
+* DCL_HANDLE_INVALID : Open failed
+* Other value : A valid handle
+*
+*************************************************************************/
+extern DCL_HANDLE DclIDC_Open(DCL_DEV dev, DCL_FLAGS flags);
+
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_ReadData
+*
+* DESCRIPTION
+* This function is not supported for the IDC module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_ReadData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN *buf_len, DCL_OPTIONS options);
+
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_WriteData
+*
+* DESCRIPTION
+* This function is not supported for the IDC module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_WriteData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN *buf_len, DCL_OPTIONS options);
+
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_Configure
+*
+* DESCRIPTION
+* This function is not supported for the IDC module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_Configure(DCL_HANDLE handle, DCL_CONFIGURE_T *configure);
+
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_RegisterCallback
+*
+* DESCRIPTION
+* This function is not supported for the IDC module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_RegisterCallback(DCL_HANDLE handle, DCL_EVENT event, PFN_DCL_CALLBACK callback);
+
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_Control
+*
+* DESCRIPTION
+* This function is to send command to control the IDC module.
+*
+* PARAMETERS
+* handle: [IN] The handle value returned from DclIDC_Open
+* cmd: [IN] A control command for IDC module
+* 1. IDC_CMD_SET_DCB_CONFIG: to config DCB (baudrate, data bits, stop bits, and parity bits)
+* 2. IDC_CMD_GET_DCB_CONFIG: to get DCB config from driver
+* 3. IDC_CMD_SET_BAUDRATE: to set baud rate
+* 4. IDC_CMD_GET_MAX_BAUDRATE: to get max baudrate
+* 5. IDC_CMD_SET_FIFO_TRIGGER: to set threshold of idc rx fifo
+* 6. IDC_CMD_SET_PM_CONFIG: to set pattern matching confg (start/finish priority/pattern, pariority/pattern bit enable)
+* 7. IDC_CMD_GET_PM_CONFIG: to get pattern matching
+* 8. IDC_CMD_SCHEDULE_EVENT: to schedule events
+* 9. IDC_CMD_SCHEDULE_UPDATE: to run schedule
+* 10. IDC_CMD_STOP_EVENT: to stop specific event from specific schedule
+* 11. IDC_CMD_PURGE: to clean IDC RX FIFO
+* 12. IDC_CMD_GET_SCHEDULE_STATUS: to get status of schedule (bitmap, busy:1, idle:0)
+* 13. IDC_CMD_CHECK_EVENT_SEND_OUT: to check all events are sent out from IDC or not
+* 14. IDC_CMD_SET_PIN_CONFIG: to set pinmux beteen internal and external pins (K2 Only)
+* 15. IDC_CMD_GET_PIN_CONFIG: to get pinumx config (K2 Only)
+*
+* data: [IN] The data of the control command
+* 1. IDC_CTRL_DCB_CONFIG_T: pointer to an IDC_CTRL_DCB_CONFIG_T structure
+* 2. IDC_CTRL_BAUDRATE_T: pointer to an IDC_CTRL_BAUDRATE_T structure
+* 3. IDC_CTRL_SET_FIFO_TRIGGER_T: pointer to an IDC_CTRL_SET_FIFO_TRIGGER_T structure
+* 4. IDC_CTRL_PM_CONFIG_T: pointer to an IDC_CTRL_PM_CONFIG_T structure
+* 5. IDC_CTRL_SCHEDULE_EVENT_T: pointer to an IDC_CTRL_SCHEDULE_EVENT_T structure
+* 6. IDC_CTRL_SCHEDULE_UPDATE_T: pointer to an IDC_CTRL_SCHEDULE_UPDATE_T structure
+* 7. IDC_CTRL_STOP_EVENT_T: pointer to an IDC_CTRL_STOP_EVENT_T structure
+* 8. IDC_CTRL_PURGE_T: pointer to an IDC_CTRL_PURGE structure
+* 9. IDC_CTRL_GET_SCHEDULE_STATUS_T: pointer to an IDC_CTRL_GET_SCHEDULE_STATUS_T structure
+* 10. IDC_CTRL_CHECK_EVENT_SEND_OUT_T: pointer to an IDC_CTRL_CHECK_EVENT_SEND_OUT_T structure
+* 11. IDC_CTRL_PIN_CONFIG_T: pointer to an IDC_CTRL_PIN_CONFIG_T structure
+*
+* RETURNS
+* Return the status of DclIDC_Control
+*
+* RETURN VALUES
+* STATUS_OK: Command is executed successfully.
+* STATUS_FAIL: Command is failed.
+* STATUS_INVALID_CMD: It's a invalid command.
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_Control(DCL_HANDLE handle, DCL_CTRL_CMD cmd, DCL_CTRL_DATA_T *data);
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_conn_txrx_count
+*
+* DESCRIPTION
+* This function is to start/end counting BT_80211_RX and BT_80211_TX
+*
+* PARAMETERS
+* is_start: [IN] KAL_TRUE: Start counting
+* KAL_FALSE: End counting
+*
+* RETURNS
+* Return the status of DclIDC_conn_txrx_count
+*
+* RETURN VALUES
+* STATUS_OK
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_conn_txrx_count(kal_bool is_start);
+
+/*************************************************************************
+* FUNCTION
+* DclIDC_Close
+*
+* DESCRIPTION
+* This function is to close the IDC module.
+*
+* PARAMETERS
+* handle: [IN] The returned handle value of DclIDC_Open
+*
+* RETURNS
+* Return the status of DclIDC_Close
+*
+* RETURN VALUES
+* STATUS_OK
+*
+*************************************************************************/
+extern DCL_STATUS DclIDC_Close(DCL_HANDLE handle);
+
+// MoDIS parser skip end
+
+#endif // #ifndef __DCL_IDC_H_PROTOTYPE__
+#endif // #ifdef DCL_DEFINITION_PROTOTYPE