[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/interface/driver/peripheral/dcl_pfc.h b/mcu/interface/driver/peripheral/dcl_pfc.h
new file mode 100644
index 0000000..d6dd0dd
--- /dev/null
+++ b/mcu/interface/driver/peripheral/dcl_pfc.h
@@ -0,0 +1,394 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2010
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * dcl_pfc.h
+ *
+ * Project:
+ * --------
+ * Maui_Software
+ *
+ * Description:
+ * ------------
+ * Header file of DCL (Driver Common Layer) for PFC.
+ *
+ * Author:
+ * -------
+ *
+ * Ansel Liao
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+
+#ifdef DCL_DEFINITION_STRUCT
+#ifndef __DCL_PFC_H_STRUCT__
+#define __DCL_PFC_H_STRUCT__
+
+/*******************************************************************************
+ * DCL_OPTIONS for PFC
+ *******************************************************************************/
+#define PFC_OPTIONS
+
+/*******************************************************************************
+ * DCL_CONFIGURE_T for PFC
+ *******************************************************************************/
+#define PFC_CONFIGS
+
+/*******************************************************************************
+ * DCL_EVENT for PFC
+ *******************************************************************************/
+#define PFC_EVENTS
+
+/*******************************************************************************
+ * PPP_PFC_CHANNEL enum for PFC
+ *******************************************************************************/
+typedef enum {
+ PPP_PFC_CHANNEL_0 = 0,
+ PPP_PFC_CHANNEL_1,
+ PPP_PFC_CHANNEL_2,
+} PPP_PFC_CHANNEL;
+
+/*******************************************************************************
+ * PPP_PFC_CHANNEL enum for PFC
+ *******************************************************************************/
+typedef enum {
+ PFC_ENCODE = 0,
+ PFC_DECODE,
+} PFC_OPERATION_SEL_T;
+
+/*******************************************************************************
+ * DCL_CTRL_CMD for PFC
+ *******************************************************************************/
+/* The PFC Command Values in DCL_CTRL_CMD_T Enum of dcl.h */
+#ifdef __BUILD_DOM__
+typedef enum {
+ PFC_CMD_RESET, /* To Reset PFC */
+ PFC_CMD_SET_CONFIG, /* to set config */
+ PFC_CMD_ENCODE, /* To Encode PPP Framer */
+ PFC_CMD_DECODE, /* To Decode PPP Framer */
+ PFC_CMD_DEQUEUE, /* to de-Q encode/decode gpd list */
+ PFC_CMD_RELOAD_RX /* to reload GPD list */
+} DCL_CTRL_CMD_T;
+#else /* __BUILD_DOM__ */
+#define PFC_CMDS \
+ PFC_CMD_RESET, \
+ PFC_CMD_SET_CONFIG, \
+ PFC_CMD_ENCODE, \
+ PFC_CMD_DECODE, \
+ PFC_CMD_DEQUEUE, \
+ PFC_CMD_RELOAD_RX,
+#endif /* __BUILD_DOM__ */
+
+/*******************************************************************************
+ * DCL_CTRL_DATA_T: Define the Control data structure for each module's command
+ *******************************************************************************/
+
+/* For PFC_CMD_RESET command. */
+typedef struct
+{
+ DCL_UINT32 en_de; /* input: encode or decode */
+ DCL_UINT32 channel; /* input: channel id */
+} PFC_CTRL_RESET_T;
+
+/* For PFC_CMD_SET_CONFIG command. */
+typedef struct
+{
+ DCL_UINT32 en_de; /* input: encode or decode */
+ DCL_UINT32 channel; /* input: channel id */
+ DCL_BOOL f32; /* input: fcs mode */
+ DCL_BOOL acfc; /* input: address and control field compression */
+ DCL_BOOL pfc; /* input: protocol field compression */
+ DCL_UINT16 max_pkt_sz; /* input: max packet size */
+ DCL_UINT16 ptc; /* input: pfc protocol */
+ DCL_UINT32 pfc_accm[7]; /* input: accm 0 ~ 6 */
+} PFC_CTRL_SET_CONFIG_T;
+
+/* For PFC_CMD_ENCODE command. */
+typedef struct
+{
+ DCL_UINT32 channel; /* input: channel id */
+ void *head; /* input: head of TGPD list */
+ void *tail; /* input: tail of TGPD list */
+} PFC_CTRL_ENCODE_T;
+
+/* For PFC_CMD_DECODE command. */
+typedef struct
+{
+ DCL_UINT32 channel; /* input: channel id */
+ void *head; /* input: head of TGPD list */
+ void *tail; /* input: tail of TGPD list */
+} PFC_CTRL_DECODE_T;
+
+/* For PFC_CMD_DEQUEUE command. */
+typedef struct
+{
+ DCL_UINT32 en_de; /* input: encode or decode */
+ DCL_UINT32 channel; /* input: channel id */
+ void **head; /* output: head of RGPD list */
+ void **tail; /* output: tail of RGPD list */
+ DCL_UINT32 *queue_len; /* output: length of queue */
+} PFC_CTRL_DEQUEUE_T;
+
+/* For PFC_CMD_RELOAD_RX command. */
+typedef struct
+{
+ DCL_UINT32 en_de; /* input: encode or decode */
+ DCL_UINT32 channel; /* input: channel id */
+ void *head; /* input: head of RGPD list */
+ void *tail; /* input: tail of RGPD list */
+ DCL_UINT32 queue_len; /* input: length of RGPD list */
+} PFC_CTRL_RELOAD_RX_T;
+
+/* The PFC Command Parameter Data Structure for Each Command in DCL_CTRL_DATA_T Enum of dcl.h */
+#ifdef __BUILD_DOM__
+typedef union
+{
+ PFC_CTRL_RESET_T r_pfc_ctrl_reset; /* Data Structure for PFC_CMD_RESET */
+ PFC_CTRL_SET_CONFIG_T r_pfc_ctrl_set_config; /* Data Structure for PFC_CMD_SET_CONFIG */
+ PFC_CTRL_ENCODE_T r_pfc_ctrl_encode; /* Data Structure for PFC_CMD_ENCODE */
+ PFC_CTRL_DECODE_T r_pfc_ctrl_decode; /* Data Structure for PFC_CMD_DECODE */
+ PFC_CTRL_DEQUEUE_T r_pfc_ctrl_dequeue; /* Data Structure for PFC_CMD_DEQUEUE */
+ PFC_CTRL_RELOAD_RX_T r_pfc_ctrl_reload_rx; /* Data Structure for PFC_CMD_RELOAD_RX */
+} DCL_CTRL_DATA_T;
+#else /* __BUILD_DOM__ */
+#define PFC_CTRLS \
+ PFC_CTRL_RESET_T r_pfc_ctrl_reset; \
+ PFC_CTRL_SET_CONFIG_T r_pfc_ctrl_set_config; \
+ PFC_CTRL_ENCODE_T r_pfc_ctrl_encode; \
+ PFC_CTRL_DECODE_T r_pfc_ctrl_decode; \
+ PFC_CTRL_DEQUEUE_T r_pfc_ctrl_dequeue; \
+ PFC_CTRL_RELOAD_RX_T r_pfc_ctrl_reload_rx;
+#endif /* __BUILD_DOM__ */
+
+#endif // #ifndef __DCL_PFC_H_STRUCT__
+#endif // #ifdef DCL_DEFINITION_STRUCT
+
+#ifdef DCL_DEFINITION_PROTOTYPE
+#ifndef __DCL_PFC_H_PROTOTYPE__
+#define __DCL_PFC_H_PROTOTYPE__
+
+
+/*************************************************************************
+* FUNCTION
+* DclPFC_Initialize
+*
+* DESCRIPTION
+* This function is to initialize PFC module
+*
+* PARAMETERS
+* None
+*
+* RETURNS
+* Return the status of DclPFC_Initialize
+*
+* RETURN VALUES
+* STATUS_OK: Initialize Finished
+*
+*************************************************************************/
+extern DCL_STATUS DclPFC_Initialize(void);
+/*************************************************************************
+* FUNCTION
+* DclPFC_Open
+*
+* DESCRIPTION
+* This function is to open the PFC module and return a handle
+*
+* PARAMETERS
+* dev: [IN] Only valid for DCL_PFC
+* flags: [IN] No sepcial flags is needed. Please use FLAGS_NONE
+*
+* RETURNS
+* Return DCL_HANDLE of PFC
+*
+* RETURN VALUES
+* DCL_HANDLE_INVALID : Open failed
+* Other value : A valid handle
+*
+*************************************************************************/
+extern DCL_HANDLE DclPFC_Open(DCL_DEV dev, DCL_FLAGS flags);
+/*************************************************************************
+* FUNCTION
+* DclPFC_ReadData
+*
+* DESCRIPTION
+* This function is not supported for the PFC module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclPFC_ReadData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN *buf_len, DCL_OPTIONS options);
+/*************************************************************************
+* FUNCTION
+* DclPFC_WriteData
+*
+* DESCRIPTION
+* This function is not supported for the PFC module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclPFC_WriteData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN *buf_len, DCL_OPTIONS options);
+/*************************************************************************
+* FUNCTION
+* DclPFC_Configure
+*
+* DESCRIPTION
+* This function is not supported for the PFC module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclPFC_Configure(DCL_HANDLE handle, DCL_CONFIGURE_T *configure);
+/*************************************************************************
+* FUNCTION
+* DclPFC_RegisterCallback
+*
+* DESCRIPTION
+* This function is to set callback function for the PFC module.
+*
+* PARAMETERS
+* handle: the returned handle value of DclPFC_Open
+* event: Supported events:
+* callback: the callback function for registered events
+*
+* RETURNS
+* STATUS_OK: Successfully register the callback function.
+* STATUS_INVALID_DCL_HANDLE: It's a invalid handle.
+* STATUS_NOT_OPENED: The module has not been opened.
+* STATUS_INVALID_EVENT: The event parameter is invalid.
+*
+*************************************************************************/
+extern DCL_STATUS DclPFC_RegisterCallback(DCL_HANDLE handle, DCL_EVENT event, PFN_DCL_CALLBACK callback);
+/*************************************************************************
+* FUNCTION
+* DclPFC_Control
+*
+* DESCRIPTION
+* This function is to send command to control the PFC module.
+*
+* PARAMETERS
+* handle: [IN] The handle value returned from DclPFC_Open
+* cmd: [IN] A control command for PFC module
+* 1. PFC_CMD_RESET: to reset PFC Module
+* 2. PFC_CMD_ENCODE: to Encode
+* 3. PFC_CMD_DECODE: to Decode
+*
+* data: [IN] The data of the control command
+* 1. PFC_CMD_RESET: pointer to a PFC_CTRL_RESET_T structure
+* 2. PFC_CMD_ENCODE: pointer to a PFC_CTRL_ENCODE_T structure
+* 3. PFC_CMD_DECODE: pointer to a PFC_CTRL_DECODE_T structure
+*
+* RETURNS
+* Return the status of DclPFC_Control
+*
+* RETURN VALUES
+* STATUS_OK: Command is executed successfully.
+* STATUS_FAIL: Command is failed.
+* STATUS_INVALID_CMD: It's a invalid command.
+*
+*************************************************************************/
+extern DCL_STATUS DclPFC_Control(DCL_HANDLE handle, DCL_CTRL_CMD cmd, DCL_CTRL_DATA_T *data);
+/*************************************************************************
+* FUNCTION
+* DclPFC_Close
+*
+* DESCRIPTION
+* This function is to close the PFC module.
+*
+* PARAMETERS
+* handle: [IN] The returned handle value of DclPFC_Open
+*
+* RETURNS
+* Return the status of DclPFC_Close
+*
+* RETURN VALUES
+* STATUS_OK
+*
+*************************************************************************/
+extern DCL_STATUS DclPFC_Close(DCL_HANDLE handle);
+
+// MoDIS parser skip end
+
+#endif // #ifndef __DCL_PFC_H_PROTOTYPE__
+#endif // #ifdef DCL_DEFINITION_PROTOTYPE