[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/interface/driver/peripheral/dcl_spmi.h b/mcu/interface/driver/peripheral/dcl_spmi.h
new file mode 100644
index 0000000..1aa4eea
--- /dev/null
+++ b/mcu/interface/driver/peripheral/dcl_spmi.h
@@ -0,0 +1,335 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2019
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * dcl_spmi.h
+ *
+ * Project:
+ * --------
+ * Maui_Software
+ *
+ * Description:
+ * ------------
+ * This file defines structures and functions for SPMI DCL interface.
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ *
+ *
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+#ifdef DCL_DEFINITION_STRUCT
+
+#ifndef __DCL_SPMI_H_STRUCT__
+#define __DCL_SPMI_H_STRUCT__
+
+/*******************************************************************************
+ * DCL_OPTIONS for SPMI
+ *******************************************************************************/
+#define SPMI_OPTIONS
+
+/*******************************************************************************
+ * DCL_CONFIGURE_T
+ *******************************************************************************/
+#define SPMI_CONFIGS
+
+/*******************************************************************************
+ * DCL_EVENT for SPMI
+ *******************************************************************************/
+#define SPMI_EVENTS
+
+typedef enum
+{
+ DCL_BUCK_CPU,
+ DCL_BUCK_GPU,
+ DCL_BUCK_MD,
+ DCL_BUCK_RF,
+ DCL_MAIN_PMIC,
+ DCL_BUCK_VPU,
+ DCL_SUB_PMIC,
+ DCL_SLV_TYPE_MAX
+}SPMI_SLV_TYPE_ENUM;
+
+/*******************************************************************************
+ * DCL_CTRL_DATA_T: Define the Control data structure for each module's command
+ *******************************************************************************/
+/* For SPMI_CTRL_EXT_REGISTER_READL command. */
+typedef struct
+{
+ DCL_UINT16 type;
+ DCL_UINT16 addr;
+ DCL_UINT16 value;
+ DCL_UINT16 len;
+}SPMI_CTRL_EXT_REGISTER_READL;
+
+/* For SPMI_CTRL_EXT_REGISTER_WRITEL command. */
+typedef struct
+{
+ DCL_UINT16 type;
+ DCL_UINT16 addr;
+ DCL_UINT16 value;
+ DCL_UINT16 len;
+}SPMI_CTRL_EXT_REGISTER_WRITEL;
+
+/* For SPMI_CTRL_EXT_REGISTER_READL_FIELD command. */
+typedef struct
+{
+ DCL_UINT16 type;
+ DCL_UINT16 addr;
+ DCL_UINT16 value;
+ DCL_UINT16 len;
+ DCL_UINT16 mask;
+ DCL_UINT16 shift;
+}SPMI_CTRL_EXT_REGISTER_READL_FIELD;
+
+/* For SPMI_CTRL_EXT_REGISTER_WRITEL_FIELD command. */
+typedef struct
+{
+ DCL_UINT16 type;
+ DCL_UINT16 addr;
+ DCL_UINT16 value;
+ DCL_UINT16 len;
+ DCL_UINT16 mask;
+ DCL_UINT16 shift;
+}SPMI_CTRL_EXT_REGISTER_WRITEL_FIELD;
+
+/*******************************************************************************
+ * DCL_CTRL_DATA_T: Define the Control data structure for each module's command
+ *******************************************************************************/
+#ifdef __BUILD_DOM__
+/* The SPMI Command Parameter Data Structure for Each Command in DCL_CTRL_DATA_T Enum of dcl.h */
+typedef struct
+{
+ SPMI_CTRL_EXT_REGISTER_READL rSPMIExtRegisterReadL;
+ SPMI_CTRL_EXT_REGISTER_WRITEL rSPMIExtRegisterWriteL;
+ SPMI_CTRL_EXT_REGISTER_READL_FIELD rSPMIExtRegisterReadLField;
+ SPMI_CTRL_EXT_REGISTER_WRITEL_FIELD rSPMIExtRegisterWriteLField;
+}SPMI_CTRL_DATA;
+#else /* __BUILD_DOM__ */
+#define SPMI_CTRLS \
+ SPMI_CTRL_EXT_REGISTER_READL rSPMIExtRegisterReadL; \
+ SPMI_CTRL_EXT_REGISTER_WRITEL rSPMIExtRegisterWriteL; \
+ SPMI_CTRL_EXT_REGISTER_READL_FIELD rSPMIExtRegisterReadLField; \
+ SPMI_CTRL_EXT_REGISTER_WRITEL_FIELD rSPMIExtRegisterWriteLField;
+#endif /* __BUILD_DOM__ */
+
+/*******************************************************************************
+ * DCL_CTRL_CMD for SPMI
+ *******************************************************************************/
+ #ifdef __BUILD_DOM__
+typedef enum {
+ EXT_REGISTER_READL = 0,
+ EXT_REGISTER_WRITEL,
+ EXT_REGISTER_READL_FIELD,
+ EXT_REGISTER_WRITEL_FIELD,
+ REGISTER_READ,
+ REGISTER_WRITE,
+ EXT_REGISTER_READ,
+ EXT_REGISTER_WRITE,
+ SPMI_MOD_CMD_MAX
+} SPMI_CTRL_CMD;
+#else /* __BUILD_DOM__ */
+#define SPMI_CMDS \
+ EXT_REGISTER_READL = 0, \
+ EXT_REGISTER_WRITEL, \
+ EXT_REGISTER_READL_FIELD, \
+ EXT_REGISTER_WRITEL_FIELD, \
+ REGISTER_READ, \
+ REGISTER_WRITE, \
+ EXT_REGISTER_READ, \
+ EXT_REGISTER_WRITE, \
+ SPMI_MOD_CMD_MAX,
+#endif /* __BUILD_DOM__ */
+
+#endif /*__DCL_SPMI_H_STRUCT__*/
+
+#endif /*DCL_DEFINITION_STRUCT*/
+
+#ifdef DCL_DEFINITION_PROTOTYPE
+#ifndef __DCL_SPMI_H_PROTOTYPE__
+#define __DCL_SPMI_H_PROTOTYPE__
+
+typedef DCL_STATUS (*SPMI_CONTROL_HANDLER)(DCL_HANDLE handle, DCL_CTRL_CMD cmd, DCL_CTRL_DATA_T *data);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_Initialize
+*
+* DESCRIPTION
+* This function is to initialize SPMI module
+*
+* PARAMETERS
+* None
+*
+* RETURNS
+* STATUS_OK
+*
+*************************************************************************/
+extern DCL_STATUS DclSPMI_Initialize(void);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_Open
+*
+* DESCRIPTION
+* This function is to open the SPMI module and return a handle
+*
+* PARAMETERS
+* dev: only valid for DCL_SPMI
+* flags: no sepcial flags is needed. Please use FLAGS_NONE
+*
+* RETURNS
+* DCL_HANDLE_INVALID: Open failed.
+* other value: a valid handle
+*
+*************************************************************************/
+extern DCL_HANDLE DclSPMI_Open(DCL_DEV dev, DCL_FLAGS flags);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_ReadData
+*
+* DESCRIPTION
+* This function is not supported for the SPMI module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclSPMI_ReadData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN buf_len, DCL_OPTIONS options);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_WriteData
+*
+* DESCRIPTION
+* This function is not supported for the SPMI module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclSPMI_WriteData(DCL_HANDLE handle, DCL_BUFF *buff, DCL_BUFF_LEN buf_len, DCL_OPTIONS options);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_Configure
+*
+* DESCRIPTION
+* This function is not supported for the SPMI module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclSPMI_Configure(DCL_HANDLE handle, DCL_CONFIGURE_T *configure);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_RegisterCallback
+*
+* DESCRIPTION
+* This function is not supported for the SPMI module now.
+*
+* PARAMETERS
+* N/A
+*
+* RETURNS
+* STATUS_UNSUPPORTED
+*
+*************************************************************************/
+extern DCL_STATUS DclSPMI_RegisterCallback(DCL_HANDLE handle, DCL_EVENT event, PFN_DCL_CALLBACK callback);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_Control
+*
+* DESCRIPTION
+* This function is to send command to control the SPMI module.
+*
+* PARAMETERS
+* handle: The handle value returned from DclSPMI_Open
+* cmd: a control command for SPMI module
+* RETURNS
+* STATUS_OK: command is executed successfully.
+* STATUS_FAIL: command is failed.
+* STATUS_INVALID_CMD: It's a invalid command.
+* STATUS_UNSUPPORTED: It's a unsupported command.
+*
+*************************************************************************/
+extern DCL_STATUS DclSPMI_Control(DCL_HANDLE handle, DCL_CTRL_CMD cmd, DCL_CTRL_DATA_T *data);
+/*************************************************************************
+* FUNCTION
+* DclSPMI_Close
+*
+* DESCRIPTION
+* This function is to close the spmi module.
+*
+* PARAMETERS
+* handle: the returned handle value of DclSPMI_Close
+*
+* RETURNS
+* STATUS_OK
+*
+*************************************************************************/
+extern DCL_STATUS DclSPMI_Close(DCL_HANDLE handle);
+#endif /*__DCL_SPMI_H_PROTOTYPE__*/
+#endif //DCL_DEFINITION_PROTOTYPE
+
+