[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6

MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF  modem version: NA

Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/interface/sap/md/data_msgid.h b/mcu/interface/sap/md/data_msgid.h
new file mode 100644
index 0000000..aee7cf8
--- /dev/null
+++ b/mcu/interface/sap/md/data_msgid.h
@@ -0,0 +1,262 @@
+/*****************************************************************************
+*  Copyright Statement:
+*  --------------------
+*  This software is protected by Copyright and the information contained
+*  herein is confidential. The software may not be copied and the information
+*  contained herein may not be used or disclosed except with the written
+*  permission of MediaTek Inc. (C) 2005
+*
+*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. 
+*
+*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+ /*******************************************************************************
+ *  Copyright Statement:
+ *  --------------------
+ *  This software is protected by Copyright and the information contained
+ *  herein is confidential. The software may not be copied and the information
+ *  contained herein may not be used or disclosed except with the written
+ *  permission of MediaTek Inc. (C) 2001
+ *
+ *******************************************************************************/
+
+ /*******************************************************************************
+ * Filename:
+ * ---------
+ *   data.sap
+ *
+ * Project:
+ * --------
+ *   MAUI
+ *
+ * Description:
+ * ------------
+ *   DATA related message identity definition
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ *==============================================================================
+ * 				HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
+ *------------------------------------------------------------------------------
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!! 
+ *==============================================================================
+ *******************************************************************************/
+
+/********************************************************************************
+*  Copyright Statement:
+*  --------------------
+*
+*  This product has been developed using a protocol stack
+*  developed by Sasken Communication Technologies Limited.
+*
+********************************************************************************/
+#include "module_msg_range.h"
+
+#ifndef _DATA_MSGID_H
+#define _DATA_MSGID_H
+
+/*------------------- DATA_MSG_CODE_BEGIN -------------------*/
+
+	/*------------------- TDT Messages -------------------------*/
+
+MODULE_MSG_BEGIN( MSG_ID_TDT_CODE_BEGIN )
+   MSG_ID_CSM_TDT_ACTIVATE_REQ = MSG_ID_TDT_CODE_BEGIN,
+   MSG_ID_CSM_TDT_DEACTIVATE_REQ,
+   MSG_ID_CSM_TDT_UART_SETOWNER_REQ,
+   MSG_ID_CSM_TDT_ESC_OFF_REQ, 
+   MSG_ID_PPP_TDT_DATA_REQ,
+   MSG_ID_TDT_CODE_END = MSG_ID_PPP_TDT_DATA_REQ,
+MODULE_MSG_END( MSG_ID_TDT_CODE_TAIL )
+
+	/*------------------- T30 Messages -------------------------*/
+MODULE_MSG_BEGIN( MSG_ID_T30_CODE_BEGIN )
+   MSG_ID_CSM_T30_ACTIVATE_REQ = MSG_ID_T30_CODE_BEGIN,
+   MSG_ID_CSM_T30_DEACTIVATE_REQ,
+   MSG_ID_CSM_T30_FAX_RATE_REQ,
+
+   MSG_ID_L4C_T30_RW_STR_PARAM_REQ,
+   MSG_ID_L4C_T30_RW_PARAM_REQ,
+   MSG_ID_L4C_T30_TX_MSG_REQ, 
+   MSG_ID_L4C_T30_RX_MSG_REQ,
+   MSG_ID_L4C_T30_TX_BCS_REQ,
+   MSG_ID_L4C_T30_RX_BCS_REQ,
+   MSG_ID_L4C_T30_TX_SILENCE_REQ,
+   MSG_ID_L4C_T30_RX_SILENCE_REQ,
+   MSG_ID_L4C_T30_TRANSFER_UART_REQ,
+   MSG_ID_L4C_T30_TX_PPM_REQ,
+
+   MSG_ID_FA_T30_ACTIVATE_CNF,
+   MSG_ID_FA_T30_DEACTIVATE_CNF,
+   MSG_ID_FA_T30_TX_DATA_CNF, 
+   MSG_ID_FA_T30_RX_DATA_CNF, 
+   MSG_ID_FA_T30_DISC_IND,
+   MSG_ID_FA_T30_CMD_CNF,
+
+   MSG_ID_FA_T30_CMD_IND,
+   MSG_ID_FA_T30_DATA_IND,
+   MSG_ID_FA_T30_GET_CMD_IND,
+   MSG_ID_FA_T30_GET_DATA_IND,
+
+   MSG_ID_FA_T30_TX_DATA_END_IND,
+   MSG_ID_FA_T30_RX_DATA_END_IND,
+   MSG_ID_FA_T30_TX_CMD_END_IND, 
+   MSG_ID_FA_T30_RX_CMD_END_IND, 
+
+   MSG_ID_FA_T30_GETMORE_DATA_IND,
+   MSG_ID_FA_T30_OVERFLOW_IND,
+   MSG_ID_FA_T30_DATA_AVAILABLE_IND,
+   MSG_ID_FA_T30_RATE_CHANGE_IND,
+   MSG_ID_FA_T30_HDLC_IND,
+   MSG_ID_T30_CODE_END = MSG_ID_FA_T30_HDLC_IND,
+MODULE_MSG_END( MSG_ID_T30_CODE_TAIL)
+
+	/*------------------- FA Messages -------------------------*/
+MODULE_MSG_BEGIN( MSG_ID_FA_CODE_BEGIN)
+   MSG_ID_T30_FA_ACTIVATE_REQ = MSG_ID_FA_CODE_BEGIN,
+   MSG_ID_T30_FA_DEACTIVATE_REQ, 
+   MSG_ID_T30_FA_CMD_REQ, 
+   MSG_ID_T30_FA_DATA_REQ,   
+   MSG_ID_T30_FA_TX_DATA_REQ, 
+   MSG_ID_T30_FA_RX_DATA_REQ, 
+   MSG_ID_T30_FA_FAX_RATE_REQ,  
+   MSG_ID_T30_FA_SEND_DATA_REQ, 
+   MSG_ID_FA_T30_HDLC_REQ,
+
+   MSG_ID_RA_FA_PROCESS_CMD_IND,
+
+   MSG_ID_RA_FA_ACTIVATE_CNF, 
+   MSG_ID_RA_FA_DL_Q_FULL_IND, 
+   MSG_ID_RA_FA_DL_Q_OVERFLOW_IND, 
+   MSG_ID_RA_FA_UL_Q_UNDERFLOW_IND, 
+   MSG_ID_RA_FA_TX_DATA_CNF, 
+   MSG_ID_RA_FA_RX_DATA_CNF, 
+   MSG_ID_RA_FA_RX_DATA_END_IND, 
+   MSG_ID_RA_FA_TX_DATA_END_IND, 
+   MSG_ID_RA_FA_RX_CMD_END_IND, 
+   MSG_ID_RA_FA_TX_CMD_END_IND, 
+   MSG_ID_RA_FA_RX_MSG_REC_IND, 
+   MSG_ID_RA_FA_RATE_CHANGE_IND,
+   MSG_ID_FA_CODE_END = MSG_ID_RA_FA_RATE_CHANGE_IND, 
+MODULE_MSG_END( MSG_ID_FA_CODE_TAIL )
+
+MODULE_MSG_BEGIN( MSG_ID_L2R_CODE_BEGIN )
+	/*------------------- L2R Messages -------------------------*/
+   MSG_ID_CSM_L2R_ACTIVATE_REQ = MSG_ID_L2R_CODE_BEGIN,
+   MSG_ID_CSM_L2R_DEACTIVATE_REQ,
+   MSG_ID_CSM_L2R_UART_SETOWNER_REQ,
+   MSG_ID_CSM_L2R_ESC_OFF_REQ,
+   MSG_ID_PPP_L2R_DATA_REQ,
+   MSG_ID_SMU_L2R_DATA_REQ,
+
+   MSG_ID_L2R_RLP_CONN_CNF,
+   MSG_ID_L2R_RLP_CONN_IND,
+   MSG_ID_L2R_RLP_XID_IND,
+   MSG_ID_L2R_RLP_TEST_CNF,          /* test cnf */
+   MSG_ID_L2R_RLP_UNITDATA_IND,   /* ui */
+   MSG_ID_L2R_RLP_DISC_CNF,
+   MSG_ID_L2R_RLP_DISC_IND,
+   MSG_ID_L2R_RLP_DETACH_CNF,
+   MSG_ID_L2R_RLP_ERROR_IND,
+   MSG_ID_L2R_RLP_RESET_CNF,
+   MSG_ID_L2R_RLP_RESET_IND,
+   MSG_ID_L2R_RLP_DATA_IND,
+   MSG_ID_L2R_RLP_READY_IND,
+   MSG_ID_L2R_RLP_CHANGE_RATE_IND,
+   MSG_ID_L2R_RLP_PREPARE_REMAP_IND,
+   MSG_ID_L2R_RLP_REMAP_IND,
+   MSG_ID_FLC_CSD_DL_APPDU_RESUME,
+   MSG_ID_L2R_CODE_END = MSG_ID_L2R_RLP_REMAP_IND,
+MODULE_MSG_END( MSG_ID_L2R_CODE_TAIL )
+
+MODULE_MSG_BEGIN( MSG_ID_RLP_CODE_BEGIN )
+   /*------------------- RLP Messages -------------------------*/
+	MSG_ID_L2R_RLP_ATTACH_REQ = MSG_ID_RLP_CODE_BEGIN,
+   MSG_ID_L2R_RLP_DATA_REQ,
+   MSG_ID_L2R_RLP_CONN_REQ,
+   MSG_ID_L2R_RLP_CONN_RESP,
+   MSG_ID_L2R_RLP_RESET_RESP,
+   MSG_ID_L2R_RLP_RESET_REQ,
+   MSG_ID_L2R_RLP_DISC_REQ,
+   MSG_ID_L2R_RLP_UNITDATA_REQ,
+   MSG_ID_L2R_RLP_XID_REQ,
+   MSG_ID_L2R_RLP_TEST_REQ,
+   MSG_ID_L2R_RLP_PREPARE_REMAP_RESP,
+   MSG_ID_L2R_RLP_REMAP_RESP,
+   MSG_ID_L2R_RLP_DETACH_REQ,
+   MSG_ID_RLP_RA_DATA_REQ,
+   MSG_ID_RLP_RA_DATA_IND,
+   MSG_ID_FLC_RLP_RR_REQ,
+   MSG_ID_FLC_RLP_RNR_REQ,
+   MSG_ID_L2R_RLP_ABOVE_UP_THRESHOLD_IND,
+   MSG_ID_L2R_RLP_BELOW_UP_THRESHOLD_IND,
+
+   MSG_ID_CSD_UART_READY_TO_READ,
+   MSG_ID_CSD_UART_READY_TO_WRITE,
+   MSG_ID_CSD_UART_DATA_REQ,
+   MSG_ID_CSD_UART_FULL_IND,
+   MSG_ID_CSD_ACTIVATE_REQ,
+   MSG_ID_CSD_DEACTIVATE_REQ,
+   MSG_ID_CSD_RA_DATA_REQ,
+   MSG_ID_CSD_RA_DATA_IND,
+   MSG_ID_CSD_CEEL_CHANGE_START_IND,
+   MSG_ID_CSD_CEEL_CHANGE_FINIDSH_IND,
+   MSG_ID_CSD_UPLINK_TICK_IND,
+   MSG_ID_CSD_DOWNLINK_TICK_IND,
+   MSG_ID_RLP_CODE_END = MSG_ID_CSD_DOWNLINK_TICK_IND,
+MODULE_MSG_END( MSG_ID_RLP_CODE_TAIL )
+
+/*------------------- DATA_MSG_CODE_END ---------------------*/
+#endif //_DATA_MSGID_H