[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/interface/sap/md/tl1_msgid.h b/mcu/interface/sap/md/tl1_msgid.h
new file mode 100644
index 0000000..6570af0
--- /dev/null
+++ b/mcu/interface/sap/md/tl1_msgid.h
@@ -0,0 +1,484 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2009
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/******************************************************************************
+ * Filename:
+ * --------------------------------------------------------
+ * tl1_sap.h
+ *
+ * Project:
+ * --------------------------------------------------------
+ *
+ *
+ * Description:
+ * --------------------------------------------------------
+ *
+ *
+ * Author:
+ * --------------------------------------------------------
+ * -------
+ *
+ * --------------------------------------------------------
+ * $Log$
+ *
+ * 10 31 2018 yuhhwang.yu
+ * [MOLY00361478] [Gen97] Gemini Compile Option Clean Up
+ * .
+ *
+ * 08 14 2018 yuhhwang.yu
+ * [MOLY00345860] [RSVAS] GEN97.DEV merge to VMOLY
+ * .
+ *
+ * 06 20 2018 cruze.yu
+ * [MOLY00285698] [93/95 re-arch][TL1] Modify tl1 code and folder for 93/95 co-codebase
+ *
+ * .
+ *
+ * 11 17 2017 cruze.yu
+ * [MOLY00288671] [MT6295][MML1 DCLC] Dynamic cache lock central control development
+ *
+ * .
+ *
+ * 10 22 2015 yunlong.li
+ * [MOLY00139750] [MT6755][TDD]
+ * .add tl1_l1adt_enter_tdd_mode_ind
+ *
+ * 08 04 2015 yunlong.li
+ * [MOLY00135310] [TK6291][E1EVB] [ADT]add adt feature
+ * .add adt feature
+ *
+ * 04 29 2015 rong.yang
+ * [MOLY00109047] [UMOLY][new feature] Pich false alarm Optimization
+ * .
+ *
+ * 04 16 2015 chuansheng.zhang
+ * [MOLY00097620] [TK6291][UBin] TL1 Platform Patch
+ * TL1: Ubin Phase2 code merge.
+ *
+ * 01 07 2015 marco.zhang
+ * [MOLY00086950] UMOLY TL1 MAINTAIN
+ * .
+ *
+ * 01 05 2015 marco.zhang
+ * [MOLY00086950] UMOLY TL1 MAINTAIN
+ * .
+ *
+ * 01 05 2015 marco.zhang
+ * [MOLY00086950] UMOLY TL1 MAINTAIN
+ * .
+ *
+ * 12 29 2014 marco.zhang
+ * [MOLY00086950] UMOLY TL1 MAINTAIN
+ * msg id frefix.
+ *
+ * 01 21 2014 wcpuser_integrator
+ * [MOLY00054475] SGLTE option rename
+ * .
+ *
+ * 11 13 2013 shouzhu.zhang
+ * [MOLY00045069] [TL1C][Volunteer Patch] Standby Measurement FSCS opt
+ * Check in MMDC Band3 Band39 co-exist feature.
+ *
+ * 04 09 2013 ast00029
+ * [MOLY00013377] [TDD128][ESL][MOLY]check-in ESL code.
+ * for ESL
+ *
+ * 04 01 2013 shouzhu.zhang
+ * [MOLY00013249] MM TL1 Code check in
+ * [TL1] Merge lastes WR8 + R9 + MM code to MOLY..
+ *
+ * 03 01 2013 shun.liu
+ * [MOLY00011182] MT6572/6582: RF TX test feature check in MOLY main
+ * EM tx test tl1 part.
+ *
+ * 09 24 2012 xiaoyun.mao
+ * [MOLY00004069] [MOLY]TDD_R9_DEV Patch back to MOLY
+ * TDD_R9_DEV patch back to MOLY
+ *
+ * 05 24 2012 wcpuser_integrator
+ * removed!
+ * Qinghua Yu check in global enum (MSG & SAP) at modem_dev.
+ *
+ * 05 24 2012 wcpuser_integrator
+ * removed!
+ * Qinghua Yu check in global enum (MSG & SAP) at modem_dev.
+ *
+ * 05 24 2012 wcpuser_integrator
+ * removed!
+ * Qinghua Yu check in global enum (MSG & SAP) at modem_dev.
+ *
+ * 05 03 2012 wcpuser_integrator
+ * removed!
+ * .
+ *
+ * 03 21 2012 shuyang.yin
+ * removed!
+ * .
+ *
+ * 03 02 2012 shuyang.yin
+ * removed!
+ * .
+ * (TL1 SAP)
+ *
+ * 12 06 2011 shuyang.yin
+ * removed!
+ * .
+ *
+ * 11 21 2011 shuyang.yin
+ *
+ * removed!
+ *
+ * 11 14 2011 shi.dong
+ * removed!
+ * TL1 code interface fta merge in MAUI.
+ *
+ * 09 07 2011 shuyang.yin
+ *
+ * removed!
+ * <saved by Perforce>
+ *
+ * 04 19 2011 xinqiu.wang
+ * removed!
+ * merge code from daily LOAD to MAUI 10A.
+ *
+ * 12 01 2010 popcafa.shih
+ * removed!
+ * .
+ *
+ * 11 04 2010 xinqiu.wang
+ * removed!
+ * 1. Add ul_mac_event to cphy_dch_setup/modify/release_req
+ * 2. Add two ticks and structs for mac-tl1 interface.
+ * 3. Add two simulation structs according to MAC's requeset.
+ *
+ * 11 03 2010 xinqiu.wang
+ * removed!
+ * 1.SLCE-TL1 SAP Modify for R7
+ * 2. MAC-TL1 SAP Modify for UPA
+ *
+ * 08 24 2010 popcafa.shih
+ * removed!
+ * .
+ *
+ * removed!
+ * removed!
+ * 1.Add MSG_ID_PHY_END_EDCH_TX_IND
+ *
+ * removed!
+ * removed!
+ *
+ *
+ * removed!
+ * removed!
+ * 1.Add MSG_ID_CPHY_EDCH_SETUP/MODIFY/RELEASE_REQ
+ *
+ * removed!
+ * removed!
+ * 1.Delete pre-declare check of __UMTS_TDD128_MODE__
+ *
+ * removed!
+ * removed!
+ * 1.Add pre-declare check of __UMTS_TDD128_MODE__
+ *
+ * removed!
+ * removed!
+ *
+ *
+ * removed!
+ * removed!
+ *
+ *
+ * removed!
+ * removed!
+ * Rename the msg code begin from UL1 to TL1
+ *
+ * removed!
+ * removed!
+ * Rename __UMTS_TDD128_RAT__ to __UMTS_TDD128_MODE__
+ *
+ * removed!
+ * removed!
+ * add log section for tl1interface header files
+ *
+*******************************************************************************/
+#include "module_msg_range.h"
+
+#ifndef _TL1_MSG_H
+#define _TL1_MSG_H
+
+#if defined(__UMTS_RAT__) && defined(__UMTS_TDD128_MODE__)
+/* Request for CPHY */
+#ifdef _Test_Hdr_On_PC
+enum {
+#endif
+
+#include "em_msgid.h"
+
+MODULE_MSG_BEGIN( MSG_ID_TL1_MSG_CODE_BEGIN )
+/* RELEASE REQ should be put before SETUP/MODIFY REQ */
+/* MSG_ID_TDD_CPHY_BCH_RELEASE_REQ to MSG_ID_TDD_CPHY_DCH_MODIFY_REQ must be continuous */
+MSG_ID_TDD_TL1_MSG_CODE_REQ_BEGIN = MSG_ID_TL1_MSG_CODE_BEGIN,
+MSG_ID_TDD_CPHY_BCH_RELEASE_REQ,
+MSG_ID_TDD_CPHY_BCH_MODIFY_REQ,
+MSG_ID_TDD_CPHY_BCH_SETUP_REQ,
+MSG_ID_TDD_CPHY_PCH_RELEASE_REQ,
+MSG_ID_TDD_CPHY_PCH_SETUP_REQ,
+MSG_ID_TDD_CPHY_PCH_MODIFY_REQ,
+MSG_ID_TDD_CPHY_FACH_RELEASE_REQ,
+MSG_ID_TDD_CPHY_FACH_SETUP_REQ,
+/*MSG_ID_CPHY_FACH_MODIFY_REQ,*/ /*MSG_ID_CPHY_FACH_MODIFY_REQ is not used in TDD128 */
+MSG_ID_TDD_CPHY_RACH_RELEASE_REQ,
+MSG_ID_TDD_CPHY_RACH_SETUP_REQ,
+MSG_ID_TDD_CPHY_DCH_RELEASE_REQ,
+MSG_ID_TDD_CPHY_DCH_SETUP_REQ,
+MSG_ID_TDD_CPHY_DCH_MODIFY_REQ,
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_REQ,
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_CONTINUE_REQ,
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_SUSPEND_REQ,
+/*MSG_ID_CPHY_FREQUENCY_SCAN_STOP_REQ,*/ /*MSG_ID_CPHY_FREQUENCY_SCAN_STOP_REQ is not used in TDD128 */
+MSG_ID_TDD_CPHY_RSSI_SNIFFER_START_REQ, /*keep their space for future use */
+MSG_ID_TDD_CPHY_RSSI_SNIFFER_STOP_REQ, /*keep their space for future use */
+MSG_ID_TDD_CPHY_MEASUREMENT_CONFIG_CELL_REQ,
+
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_CONFIG_REQ,
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_STOP_REQ,
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_RESULT_REQ,
+MSG_ID_TDD_CPHY_SPECIFIC_CELL_SEARCH_REQ,
+MSG_ID_TDD_CPHY_SPECIFIC_CELL_SEARCH_STOP_REQ,
+MSG_ID_TDD_CPHY_RESET_REQ,
+MSG_ID_TDD_CPHY_DUPLEX_MODE_CHANGE_REQ,
+MSG_ID_TDD_CPHY_RF_ON_REQ,
+MSG_ID_TDD_CPHY_RF_OFF_REQ,
+MSG_ID_TDD_CPHY_SET_ACTIVE_RAT_REQ,
+
+MSG_ID_TDD_CPHY_HSDSCH_SETUP_REQ,
+MSG_ID_TDD_CPHY_HSDSCH_MODIFY_REQ,
+MSG_ID_TDD_CPHY_HSDSCH_RELEASE_REQ,
+
+#ifdef __HSUPA_SUPPORT__
+MSG_ID_TDD_CPHY_EDCH_SETUP_REQ,
+MSG_ID_TDD_CPHY_EDCH_MODIFY_REQ,
+MSG_ID_TDD_CPHY_EDCH_RELEASE_REQ,
+#ifdef __SIMULATION_PS_TL1_BOTH__
+MSG_ID_TDD_CPHY_SIMULATE_DPA_ONLY_SUB_FRAME_ENTRY_REQ, /*By sub-frame. tl1data_ast_msgid.h has the same def for dsp resp logging.*/
+MSG_ID_TDD_CPHY_SIMULATE_UPA_ONLY_SUB_FRAME_ENTRY_REQ, /*By sub-frame*/
+#endif /*__SIMULATION_PS_TL1_BOTH__*/
+#endif
+
+//#if defined( __UMTS_R9__ ) && defined ( __AST3002__ )
+MSG_ID_TDD_CPHY_MEASUREMENT_CONFIG_DMO_REQ,
+//#endif
+MSG_ID_TDD_CPHY_MEASUREMENT_CONFIG_IDLE_INTERVAL_REQ, /*Interface for idle interval*/
+
+MSG_ID_TDD_CPHY_MSG_CONTAINER_REQ,
+MSG_ID_TDD_CPHY_ABORT_REQ,
+MSG_ID_TDD_CPHY_ABORT_BCH_SETUP_REQ,
+
+
+/* Request from PHY */
+MSG_ID_TDD_PHY_RACH_DATA_REQ,
+
+MSG_ID_TDD_RSVAS_TL1_SUSPEND_REQ,
+MSG_ID_TDD_RSVAS_TL1_RESUME_REQ,
+
+MSG_ID_TDD_PHY_ACCESS_REQ,
+MSG_ID_L4CTL1_EM_TST_CONTROL_REQ,
+
+MSG_ID_TDD_TL1_MSG_CODE_REQ_END,
+
+/*MSG_ID_UL1C_UL1A_UREPORT,
+MSG_ID_UL1D_UL1C_UREPORT,*/
+
+/* Confirm & Indication for CPHY */
+MSG_ID_TDD_CPHY_BCH_SETUP_CNF,
+MSG_ID_TDD_CPHY_BCH_SETUP_IND,
+MSG_ID_TDD_CPHY_BCH_MODIFY_CNF,
+MSG_ID_TDD_CPHY_BCH_MODIFY_IND,
+MSG_ID_TDD_CPHY_BCH_RELEASE_CNF,
+MSG_ID_TDD_CPHY_BCH_RELEASE_IND,
+MSG_ID_TDD_CPHY_SFN_IND,
+
+
+MSG_ID_TDD_CPHY_T312_EXPIRY_IND,
+MSG_ID_TDD_CPHY_DL_INIT_SYNC_IND,
+MSG_ID_TDD_CPHY_RL_FAILURE_IND,
+
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_CNF,
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_IND,
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_CONTINUE_CNF,
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_SUSPEND_CNF,
+MSG_ID_TDD_CPHY_FREQUENCY_SCAN_SUSPEND_IND,
+
+MSG_ID_TDD_CPHY_RSSI_SNIFFER_START_CNF,
+MSG_ID_TDD_CPHY_RSSI_SNIFFER_STOP_CNF,
+MSG_ID_TDD_CPHY_RSSI_SNIFFER_SIGNAL_APPEAR_IND,
+MSG_ID_TDD_CPHY_MEASUREMENT_CONFIG_CELL_CNF,
+MSG_ID_TDD_CPHY_MEASUREMENT_CELL_IND,
+
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_CONFIG_CNF,
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_EVENT_IND,
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_PERIODIC_IND,
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_RESULT_IND,
+MSG_ID_TDD_CPHY_MEASUREMENT_INTERNAL_STOP_CNF,
+
+MSG_ID_TDD_CPHY_SPECIFIC_CELL_SEARCH_IND,
+MSG_ID_TDD_CPHY_SPECIFIC_CELL_SEARCH_STOP_IND,
+MSG_ID_TDD_CPHY_RESET_CNF,
+MSG_ID_TDD_CPHY_DUPLEX_MODE_CHANGE_CNF,
+MSG_ID_TDD_CPHY_RF_ON_CNF,
+MSG_ID_TDD_CPHY_RF_OFF_CNF,
+MSG_ID_TDD_CPHY_SET_ACTIVE_RAT_CNF,
+
+MSG_ID_TDD_CPHY_MSG_CONTAINER_CNF,
+MSG_ID_TDD_CPHY_MSG_CONTAINER_IND,
+MSG_ID_TDD_CPHY_ABORT_CNF,
+MSG_ID_TDD_CPHY_TX_STATUS_IND,
+#ifdef __TDD_DM_GAP_OPTIMIZATION__
+MSG_ID_TDD_CPHY_GSM_GAP_STATUS_IND,
+#endif
+/* Confirm & Indication for PHY */
+MSG_ID_TDD_PHY_PCH_SETUP_IND,
+/*MSG_ID_PHY_PCH_MODIFY_IND,*/ /* MSG_ID_PHY_PCH_MODIFY_IND is not used in TDD128 */
+MSG_ID_TDD_PHY_PCH_RELEASE_IND,
+MSG_ID_TDD_PHY_FACH_SETUP_IND,
+/*MSG_ID_PHY_FACH_MODIFY_IND,*/ /* MSG_ID_PHY_FACH_MODIFY_IND is not used in TDD128 */
+MSG_ID_TDD_PHY_FACH_RELEASE_IND,
+MSG_ID_TDD_PHY_RACH_SETUP_IND,
+MSG_ID_TDD_PHY_RACH_RELEASE_IND,
+MSG_ID_TDD_PHY_DCH_SETUP_IND,
+MSG_ID_TDD_PHY_DCH_MODIFY_IND,
+MSG_ID_TDD_PHY_DCH_RELEASE_IND,
+MSG_ID_TDD_PHY_CONFIG_ABORT_IND,
+MSG_ID_TDD_PHY_DL_INIT_SYNC_IND,
+MSG_ID_TDD_PHY_BCH_DATA_IND,
+/*specially for pch data from PHY to LUMAC*/
+MSG_ID_TDD_PHY_PCH_DATA_IND,
+MSG_ID_TDD_PHY_DATA_IND,
+MSG_ID_TDD_PHY_ACCESS_IND,
+MSG_ID_TDD_PHY_POST_TX_IND,
+MSG_ID_TDD_PHY_END_DCH_TX_IND,
+MSG_ID_TDD_PHY_HSDSCH_DATA_IND,
+
+#ifdef __HSUPA_SUPPORT__
+MSG_ID_TDD_PHY_END_EDCH_TX_IND,
+#endif
+
+MSG_ID_TDD_CPHY_MEASUREMENT_CONFIG_IDLE_INTERVAL_CNF, /*Interface for idle interval*/
+
+/*New-Added message for HSPA+ */
+
+/*MSG_ID_CPHY_ULSYNC_ORDER_IND,*/
+MSG_ID_TDD_PHY_ERUCCH_ACCESS_IND,
+MSG_ID_TDD_PHY_CEDCH_SETUP_IND,
+MSG_ID_TDD_PHY_CEDCH_RELEASE_IND,
+MSG_ID_TDD_PHY_CEDCH_MODIFY_IND,
+MSG_ID_TDD_PHY_CEDCH_TERMINATION_IND,
+MSG_ID_TDD_PHY_CEDCH_TERMINATION_REQ,
+
+/*New-Added message for HSPA+ */
+
+/*========== UMAC UT SIMULATE MESSAGE ==========*/
+//#ifdef __MNT_UT_UMAC_ALONE_WITHOUT_L1__ /* UMAC UT */
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CCTRCH_TASK,
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CCTRCH_HISR,
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CCTRCH_HISR_RSP,
+
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CCTRCH_LISR,
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CCTRCH_LISR_RSP,
+
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CALLBACK_CCTRCH,
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CALLBACK_CCTRCH_RSP,
+MSG_ID_TDD_PHY_SIMULATE_DCH_UL_CALLBACK_POWER,
+MSG_ID_TDD_PHY_SIMULATE_END_DCH_TX_IND,
+
+MSG_ID_TDD_PHY_SIMULATE_UMAC_UL_DCH_TICK,
+MSG_ID_TDD_PHY_SIMULATE_UMAC_UL_DCH_TICK_END,
+#ifdef __HSUPA_SUPPORT__
+MSG_ID_TDD_PHY_SIMULATE_UMAC_E_DCH_TICK_1,
+MSG_ID_TDD_PHY_SIMULATE_UMAC_E_DCH_TICK_1_RSP,
+MSG_ID_TDD_PHY_SIMULATE_UMAC_E_DCH_TICK_2,
+MSG_ID_TDD_PHY_SIMULATE_UMAC_E_DCH_TICK_2_RSP,
+MSG_ID_TDD_PHY_SIMULATE_UMAC_E_DCH_TICK_3,
+MSG_ID_TDD_PHY_SIMULATE_UMAC_E_DCH_TICK_4,
+MSG_ID_TDD_PHY_SIMULATE_INVOKE_UL_INFORM_EDCH_MAC,
+//MSG_ID_PHY_SIMULATE_END_EDCH_TX_IND,
+#endif
+//#endif /* __MNT_UT_UMAC_ALONE_WITHOUT_L1__ */
+/*========== END UMAC UT SIMULATE MESSAGE ==========*/
+
+MSG_ID_TDD_CPHY_MSG_CONTAINER_REQ_UNPACK,
+MSG_ID_TDD_CPHY_CHANNEL_QUALITY_STATUS_IND,
+
+MSG_ID_TDD_RSVAS_TL1_SUSPEND_CNF,
+MSG_ID_TDD_RSVAS_TL1_RESUME_CNF,
+
+
+MSG_ID_TDD_CPHY_CHANNEL_PRIORITY_ADJUSTMENT_REQ,
+MSG_ID_TDD_URR_TL1_SWITCH_GEMINI_MODE_REQ,
+MSG_ID_TDD_RSVAS_TL1_VIRTUAL_RESUME_REQ,
+MSG_ID_TDD_RSVAS_TL1_VIRTUAL_RESUME_CNF,
+MSG_ID_TDD_PHY_CHANNEL_PRIORITY_ADJUSTMENT_REQ,
+
+
+//move this meassage to L4
+//#if 1//__TDD_TX_PWR_REDUCE__
+//MSG_ID_TDD_TL1_UMTS_MAX_TX_PWR_RED_REQ,
+//#endif
+
+/*ADT Test start*/
+#if defined (__MML1_ADT_ENABLE__)
+MSG_ID_TDD_TL1_L1ADT_ENTER_CONNECTED_REQ,
+MSG_ID_TDD_TL1_L1ADT_ENTER_CONNECTED_CNF,
+
+MSG_ID_TDD_TL1_L1ADT_LEAVE_CONNECTED_REQ,
+MSG_ID_TDD_TL1_L1ADT_LEAVE_CONNECTED_CNF,
+
+MSG_ID_TDD_TL1_L1ADT_ENTER_TDD_MODE_REQ,
+MSG_ID_TDD_TL1_L1ADT_ENTER_TDD_MODE_CNF,
+MSG_ID_TDD_TL1_L1ADT_ENTER_TDD_MODE_IND,
+#endif
+/*ADT Test end*/
+#if defined(__DYNAMIC_CACHE_LOCK_CENTRAL_CONTROL_SUPPORT__)
+MSG_ID_TL1_DCLC_LOCK_UNLOCK_IND,
+#endif
+
+MODULE_MSG_END( MSG_ID_TL1_MSG_CODE_TAIL )
+
+#ifdef _Test_Hdr_On_PC
+};
+#endif
+#endif
+
+#endif //_TL1_MSG_H