[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6

MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF  modem version: NA

Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/interface/service/stacklib/bitop_macros.h b/mcu/interface/service/stacklib/bitop_macros.h
new file mode 100644
index 0000000..504776b
--- /dev/null
+++ b/mcu/interface/service/stacklib/bitop_macros.h
@@ -0,0 +1,270 @@
+/*****************************************************************************
+*  Copyright Statement:
+*  --------------------
+*  This software is protected by Copyright and the information contained
+*  herein is confidential. The software may not be copied and the information
+*  contained herein may not be used or disclosed except with the written
+*  permission of MediaTek Inc. (C) 2005
+*
+*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. 
+*
+*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ *   bitop_macros.h
+ *
+ * Project:
+ * --------
+ *   Maui_Software
+ *
+ * Description:
+ * ------------
+ *   Preprocessor macros for putting and getting bit fields into
+*    byte arrays.
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ *============================================================================
+ *             HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *============================================================================
+ ****************************************************************************/
+
+/*********************************************************************
+   (C) _____ (year of first publication) Sasken communication
+   Technologies Limited, All rights reserved.
+*   This file provides a template for .c files. This space
+*   should be used to describe the file contents
+*   Component-specific prefix : xxxx
+*********************************************************************/
+ 
+#ifndef _BITOP_MACROS_H
+#define _BITOP_MACROS_H
+
+/***************************************************************************
+ * Macros With Parameters
+ ***************************************************************************/
+
+#define MASK(_w) ( ((_w)>31) ? 0xffffffff : (0x1u << (_w)) - 1 )
+
+
+/* _uc is the pointer to the byte stream from which bits to be read */
+/* _s is the offset in bits from MSB of the byte stream _uc  */
+/* _w is the number of bits to be read  */
+
+#define GET_BITS_1_8(_uc, _s, _w) (                                  \
+   (((_s)+(_w)>8) ? *(_uc) << ((_s)+(_w)-8) |                        \
+    *((_uc)+1) >> (16-(_s)-(_w)) :                                   \
+     *(_uc) << (_s) >> (8-(_w)))                                     \
+    & MASK(_w) )
+
+#define GET_BITS_9_16(_uc, _s, _w) (                                 \
+   ((_s+_w>16) ? *_uc << (_s+_w-8) | *(_uc+1) << (_s+_w-16) |        \
+    *(_uc+2) >> (24-_s-_w) :                                         \
+        *_uc << (_s+_w-8) | *(_uc+1) >> (16-_s-_w))                  \
+    & MASK(_w))
+
+#define GET_BITS_17_24(_uc, _s, _w) (                                \
+    (((_s)+(_w)>24) ? *(_uc) << ((_s)+(_w)-8) |                      \
+     *((_uc)+1) << ((_s)+(_w)-16) |                                  \
+     *((_uc)+2) << ((_s)+(_w)-24) | *((_uc)+3) >> (32-(_s)-(_w)) :   \
+        *(_uc) << ((_s)+(_w)-8) | *((_uc)+1) << ((_s)+(_w)-16) |     \
+        *((_uc)+2) >> (24-(_s)-(_w)))                                \
+    & MASK(_w))
+
+#define GET_BITS_25_32(_uc, _s, _w) (                               \
+    (((_s)+(_w)>32) ? *(_uc) << ((_s)+(_w)-8) |                      \
+     *((_uc)+1) << ((_s)+(_w)-16) |                                  \
+     *((_uc)+2) << ((_s)+(_w)-24) | *((_uc)+3) << ((_s)+(_w)-32) |   \
+     *((_uc)+4) >> (40-(_s)-(_w)) : *(_uc) << ((_s)+(_w)-8) |        \
+     *((_uc)+1) << ((_s)+(_w)-16) | *((_uc)+2) << ((_s)+(_w)-24) |   \
+     *((_uc)+3) >> (32-(_s)-(_w))) & MASK(_w))
+
+#define GET_BITS(_uc, _s, _w) (                                      \
+    ((_w)>8) ? (((_w)>16) ? (((_w)>24) ?                             \
+        GET_BITS_25_32((_uc), (_s), (_w)) :                          \
+        GET_BITS_17_24((_uc), (_s), (_w))) :                         \
+        GET_BITS_9_16((_uc), (_s), (_w))) :                          \
+        GET_BITS_1_8((_uc), (_s), (_w))                              \
+    )
+
+/* _uc is the pointer to the byte stream to which bits to be written */
+/* _s is the offset in bits from MSB of the byte stream _uc  */
+/* _w is the number of bits to be written  */
+/* _i is the value to be written  */
+
+#define PUT_BITS_1_8(_uc, _s, _w, _i)                                \
+    if ((_s)+(_w)>8) {                                               \
+        *(_uc)     &= ~ MASK(8-(_s));                               \
+        *(_uc)     |= ((_i) & MASK((_w))) >> ((_s)+(_w)- 8);        \
+        *((_uc)+1)   = (*((_uc)+1) & MASK(16-(_s)-(_w))) |           \
+        (_i) << (16-(_s)-(_w));                                      \
+    } else {                                                         \
+        *(_uc)     &= ~ (MASK((_w)) << ( 8-(_w)-(_s)));             \
+        *(_uc)     |= ((_i) & MASK((_w))) << ( 8-(_w)-(_s));        \
+    }
+
+#define PUT_BITS_9_16(_uc, _s, _w, _i)                               \
+    *(_uc) &= ~ MASK(8-(_s));                                       \
+    if ((_s)+(_w)>16) {                                              \
+        *(_uc)     |= ((_i) & MASK((_w))) >> ((_s)+(_w)- 8);        \
+        *((_uc)+1)   = (_i) >> ((_s)+(_w)-16);                       \
+        *((_uc)+2)   = (*((_uc)+2) & MASK(24-(_s)-(_w))) |           \
+        (_i) << (24-(_s)-(_w));                                      \
+    } else {                                                         \
+        *(_uc)     |= ((_i) & MASK((_w))) >> ((_s)+(_w)- 8);        \
+        *((_uc)+1)   = (*((_uc)+1) & MASK(16-(_s)-(_w))) |           \
+        (_i) << (16-(_s)-(_w));                                      \
+    }
+
+#define PUT_BITS_17_24(_uc, _s, _w, _i)                              \
+    *(_uc) &= ~ MASK(8-(_s));                                       \
+    if ((_s)+(_w)>24) {                                              \
+        *(_uc)     |= ((_i) & MASK((_w))) >> ((_s)+(_w)- 8);        \
+        *((_uc)+1)   = (_i) >> ((_s)+(_w)-16);                       \
+        *((_uc)+2)   = (_i) >> ((_s)+(_w)-24);                       \
+        *((_uc)+3)   = (*((_uc)+3) & MASK(32-(_s)-(_w))) |           \
+        (_i) << (32-(_s)-(_w));                                      \
+    } else {                                                         \
+        *(_uc)     |= ((_i) & MASK((_w))) >> ((_s)+(_w)- 8);        \
+        *((_uc)+1)   = (_i) >> ((_s)+(_w)-16);                       \
+        *((_uc)+2)   = (*((_uc)+2) & MASK(24-(_s)-(_w))) |           \
+        (_i) << (24-(_s)-(_w));                                      \
+    }
+
+#define PUT_BITS_25_32(_uc, _s, _w, _i)                              \
+    *(_uc) &= ~MASK(8-(_s));                                        \
+    if ((_s)+(_w)>32) {                                              \
+        *(_uc)     |= ((_i) & MASK((_w))) >> ((_s)+(_w)- 8);        \
+        *((_uc)+1)   = (_i) >> ((_s)+(_w)-16);                       \
+        *((_uc)+2)   = (_i) >> ((_s)+(_w)-24);                       \
+        *((_uc)+3)   = (_i) >> ((_s)+(_w)-32);                       \
+        *((_uc)+4)   = (*((_uc)+4) & MASK(40-(_s)-(_w))) |           \
+        (_i) << (40-(_s)-(_w));                                      \
+    } else {                                                         \
+        *(_uc)     |= ((_i) & MASK((_w))) >> ((_s)+(_w)- 8);        \
+        *((_uc)+1)   = (_i) >> ((_s)+(_w)-16);                       \
+        *((_uc)+2)   = (_i) >> ((_s)+(_w)-24);                       \
+        *((_uc)+3)   = (*((_uc)+3) & MASK(32-(_s)-(_w))) |           \
+        (_i) << (32-(_s)-(_w));                                      \
+    }
+
+#define PUT_BITS(_uc, _s, _w, _i)                                    \
+    if ((_w)<9) {                                                    \
+        PUT_BITS_1_8(_uc, _s, _w, _i)                                \
+    } else if ((_w)<17) {                                            \
+        PUT_BITS_9_16(_uc, _s, _w, _i)                               \
+    } else if ((_w)<25) {                                            \
+        PUT_BITS_17_24(_uc, _s, _w, _i)                              \
+    } else {                                                         \
+        PUT_BITS_25_32(_uc, _s, _w, _i)                              \
+    }
+
+
+/********************************************************************/
+/* This macro insert a given number of bits to a bit position
+ * by shifting the existing bits down. */
+
+/* ptr is the pointer to the byte stream
+ * to which bits to be inserted.         */
+/* _offset is the offset in bytes from MSB of byte stream ptr.  */
+/* length is the number of bits to be inserted.                 */
+/* _size is the number of bits in the bit stream, after the point
+ * of insertion ,which is to be shifted. */
+/* _value is the value to be inserted.   */
+
+
+#define INSERT_BITS(ptr,_offset,length,_size,_value)                 \
+{                                                                    \
+    unsigned int temp,value =_value;                                 \
+    unsigned short int offset=_offset,size=_size;                    \
+    while(length <= size) {                                          \
+        temp = GET_BITS(ptr,offset,length);                          \
+        PUT_BITS(ptr,offset,length,value);                           \
+        ptr = ptr +((offset+length)/8);                              \
+        offset = (offset+length)%8;                                  \
+        size -=length;                                               \
+        value = temp;                                                \
+    }                                                                \
+    temp = GET_BITS(ptr,offset,size);                                \
+    PUT_BITS(ptr,offset,length,value);                               \
+    ptr = ptr +(offset+length)/8;                                    \
+    offset = (offset+length)%8;                                      \
+    PUT_BITS(ptr,offset,size,temp);                                  \
+}
+
+/* Conversions for length fields                                      */
+/* BITS_TO_BYTES_INC converts a length in bits, to a length in bytes, */
+/* inclusive of remainder (i.e. rounding up)                          */
+/* BITS_TO_BYTES_EXC converts a length in bits, to a length in bytes, */
+/* exclusive of remainder (i.e. rounding down)                        */
+/* These macros work for all types of integer                         */
+/* but beware sufficient headroom on BYTES_TO_BITS                    */
+#define BITS_TO_BYTES_INC(bit_length) (((bit_length)+7)/8)
+#define BITS_TO_BYTES_EXC(bit_length) ((bit_length)/8)
+#define BYTES_TO_BITS(length) ((length)*8)
+
+/* Similar to round up to fit U32s                                    */
+/* for buffer size allocation etc.                                    */
+#define BITS_TO_U32S_INC(bit_length) (((bit_length)+31)/32)
+#define BYTES_TO_U32S_INC(length) (((length)+3)/4)
+
+#endif /* _BITOP_MACROS_H */
+
+