[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/protocol/interface/general/mll1_eutran.h b/mcu/protocol/interface/general/mll1_eutran.h
new file mode 100644
index 0000000..95bd67d
--- /dev/null
+++ b/mcu/protocol/interface/general/mll1_eutran.h
@@ -0,0 +1,1248 @@
+#ifndef _MLL1_EUTRAN_H
+#define _MLL1_EUTRAN_H
+
+#include "kal_public_defs.h" /*for LOCAL_PARA_HDR*/
+#include "mll1_common.h"
+/*****************************************************************************
+* DEFINITIONS
+*****************************************************************************/
+#define EUTRAN_SESSION_IN_PERIOD 48 /*align TDS DMO based on 10ms, 480ms/10ms = 48*/
+
+#define EUTRAN_SCHEDULE_DELAY 0 /* used to postpone available gap start time */
+
+/*****************************************************************************
+* ENUMERATIONS
+*****************************************************************************/
+
+/*****************************************************************************
+* ENUMERATION
+* el1_ll1_rat_status_enum
+*
+* DESCRIPTIONS
+* Used to identify the status in EUTRAN RAT.
+* NOTE
+* any modification should sync. with ll1_rat_status_enum
+*****************************************************************************/
+typedef enum
+{
+ EL1_LL1_RAT_FLIGHT =0,
+ EL1_LL1_RAT_STANDBY,
+ EL1_LL1_RAT_ACTIVE,
+ EL1_LL1_RAT_NUM
+} el1_ll1_rat_status_enum;
+
+/*****************************************************************************
+* STRUCTURES
+*****************************************************************************/
+
+/*****************************************************************************
+* STRUCT
+* eutran_time_struct
+*
+* DESCRIPTIONS
+* EUTRAN system timing base
+*
+* PARAMETERS
+* sfn - EUTRAN system frame number (0~0XFFFFFFF). -1 = IMMEDIATELY
+* sub_frame - EUTRAN sub-frame number (0~9)
+* sample - EUTRAN half samples (0~61439)
+*****************************************************************************/
+typedef struct
+{
+ kal_uint32 sfn;
+ kal_uint8 sub_frame;
+ kal_uint16 sample;
+}eutran_time_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_eutran_standby_gap_struct
+*
+* DESCRIPTIONS
+* EUTRAN standby gap pattern structure.
+*
+* PARAMETERS
+* start_time - start time of the gap session
+* length - length of the gap session (in sample)
+*****************************************************************************/
+typedef struct
+{
+ eutran_time_struct start_time;
+ kal_int64 length;
+}ll1_eutran_standby_gap_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_el1_expand_gap_pattern_struct
+*
+* DESCRIPTIONS
+* LL1 expands gap pattern for EL1
+*
+* PARAMETERS
+* session_num - Indicate how many gap session
+* session[] - Standby gap session.
+* measure_tid - Transition id for RANK tick./Valid when active RAT is in DRX mode./And bit 0 in tick_bitmap is "1"
+* hps_tid - Transition id for HPS tick./Valid when active RAT is in DRX mode./And bit 1 in tick_bitmap is "1"
+* tick_bitmap - Bit 0 : Rank search , Bit 1 : Priority search
+* gap_seq - Valid only in SDCCH mode. 2* (9 frames / 102 frames) for one frequency. 1: the first gap pattern ; 2: the last gap pattern
+*****************************************************************************/
+typedef struct
+{
+ kal_uint8 session_num;
+ ll1_eutran_standby_gap_struct session[EUTRAN_SESSION_IN_PERIOD];
+ kal_uint8 measure_tid;
+ kal_uint8 hps_tid;
+ kal_uint8 tick_bitmap;
+ kal_uint8 gap_seq;
+}ll1_el1_expand_gap_pattern_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_eutran_gap_config_struct
+*
+* DESCRIPTIONS
+* EUTRAN gap configuration when EUTRAN is active RAT.
+*
+* PARAMETERS
+* start_time - Valid time of gap pattern in active RAT
+* use_num - Continuous gap number could be used in active RAT(Basic unit = 480ms)
+* skip_num - Skip number in active RAT. (Basic unit = 480ms)
+*****************************************************************************/
+typedef struct
+{
+ eutran_time_struct start_time;
+ kal_uint8 use_num;
+ kal_uint8 skip_num;
+}ll1_eutran_gap_config_struct;
+
+/*****************************************************************************
+* STRUCT
+* eutran_drx_gap_struct
+*
+* DESCRIPTIONS
+* EUTRAN drx gap structure.
+*
+* PARAMETERS
+* start_time - start time of the gap session
+* length - length of the gap session (in sub_frame)
+* is_drx_tick - KAL_TRUE : First tick in this DRX period
+* KAL_FALSE: Not the first free interval in this DRX period
+*****************************************************************************/
+typedef struct
+{
+ eutran_time_struct start_time;
+ kal_int32 length;
+ kal_bool is_drx_tick;
+}eutran_drx_gap_struct;
+
+/*****************************************************************************
+* STRUCT
+* eutran_connect_gap_struct
+*
+* DESCRIPTIONS
+* EUTRAN gap structure in connection mode without DRX .
+*
+* PARAMETERS
+* start_time - start time of the gap session
+* period - ID 0 = 40 ms ; ID 1 = 80 ms;
+* length - length of the gap session = 6 (ms)
+*****************************************************************************/
+typedef struct
+{
+ eutran_time_struct start_time;
+ kal_uint8 period;
+ kal_uint8 length;
+}eutran_connect_gap_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_sync_cnf_struct
+*
+* DESCRIPTIONS
+* EL1 uses this primitive to confirm LL1 that current EUTRAN timing
+* and micro second counter value.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* current_time - sync. time in eutran_time_struct
+* eutran_ustime - sync. time in USC
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ eutran_time_struct current_time;
+ kal_uint32 eutran_ustime;
+}el1_ll1_sync_cnf_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_rat_status_ind_struct
+*
+* DESCRIPTIONS
+* This message is sent from EL1 to LL1 for informing current GL1 RAT status.
+* This message should be sent when EL1 RAT status changed.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* rat_status - RAT status in EL1
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ el1_ll1_rat_status_enum rat_status;
+}el1_ll1_rat_status_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_mode_status_ind_struct
+*
+* DESCRIPTIONS
+* This message is sent from EL1 to LL1 for informing that GL1 mode status when GL1 is active RAT.
+* This message should be sent when EL1 mode status changed.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* eutran_mode_status - current mode in EL1 when EUTRAN is active RAT
+* is_cell_changed - KAL_TRUE : Cell changed
+* KAL_FALSE : When only status or drx_cycle_length changed.
+* drx_cycle_length - valid when eutran_mode_status = EL1_LL1_IDLE_MODE
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ ll1_active_rat_mode_status_enum eutran_mode_status;
+ kal_bool is_cell_changed;
+ kal_uint16 drx_cycle_length;
+}el1_ll1_mode_status_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_el1_mode_status_update_ind_struct
+*
+* DESCRIPTIONS
+* This message is sent to EL1 for informing that mode status of active RAT when EL1 is standby RAT.
+* This message should be updated for EL1 in standby when any mode status changed in active RAT.
+* Also when EL1 enters into standby RAT from FLIGHT, LL1 will update current mode state in active RAT to EL1.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* active_rat_mode_status - current mode status in active RAT
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ ll1_active_rat_mode_status_enum active_rat_mode_status;
+}ll1_el1_mode_status_update_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_active_measure_status_ind_struct
+*
+* DESCRIPTIONS
+* EL1 informs LL1 that how many higher priority inter-frequencies in EL1 when high priority search is turned on
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* freq_num - The number of higher priority inter-freq. in EL1.(0~3)
+* When HPS off, the freq_num is equal to zero.
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ kal_uint8 freq_num;
+}el1_ll1_active_measure_status_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_measure_req_struct
+*
+* DESCRIPTIONS
+* This message is sent from EL1 to inform LL1 that how many EUTRAN frequencies are required to be
+* measured and the measurement purposes both in EUTRAN Active and Standby. The message is not
+* applicable for EL1 to request gaps for inter-frequency measurement in idle mode.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* meas_purpose_bitmap - bit 0 for measurement, bit 1 for cell search, bit 2 for BCCH
+* tid - tid for lastest meas_req on (should only change when off)
+* tick_bitmap - bit 0 for ranking search, bit 1 for priority search
+* freq_num - high priority freqencies when HPS ON, measurement frequencies when HPS OFF
+* t_hps - basic period of high priority search (25s,60s,70s)
+* is_period_reset_bmp - bit 0 for rank period, 1 means to reset
+* - bit 1 for prio period, 0 means not to reset
+* - when freq. num is same as before, ll1 will check this flag to reset period or not
+* - KAL_TRUE : reset hps period, KAL_FALSE : doesnt reset hps period.
+* current_time - current in EL1
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ kal_uint8 meas_purpose_bitmap;
+ kal_uint8 tid;
+ kal_uint8 tick_bitmap;
+ kal_uint8 freq_num;
+ kal_uint16 t_hps;
+ kal_int32 is_period_reset_bmp;
+ eutran_time_struct current_time;
+}el1_ll1_measure_req_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_standby_measure_done_ind_struct
+*
+* DESCRIPTIONS
+* For low power optimization, EL1 informs LL1 which measurement purpose is
+* measured done in its period. If all measurement purposes are measured done,
+* LL1 will not tick EL1 anymore in shortest measurement period.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* tid - For LL1 to know this tid is mapped to which gap pattern period sent before
+* tick_bitmap - bit 0 for ranking search, bit 1 for priority search. Only one bit will be set in one message
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ kal_uint8 tid;
+ kal_uint8 tick_bitmap;
+}el1_ll1_standby_measure_done_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_el1_gap_service_req_struct
+*
+* DESCRIPTIONS
+* LL1 uses this primitive to enable (disable) active RAT gap service to get (release)
+* the free radio frequency period in EUTRAN.When LL1 disables active RAT gap service,
+* it means that EUTRAN could use all RF time already.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* enable - KAL_TRUE : request gap service
+* KAL_FALSE : stop gap service
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ kal_bool enable;
+}ll1_el1_gap_service_req_struct;
+
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_gap_stop_cnf_struct
+*
+* DESCRIPTIONS
+* EL1 uses this primitive to confirm LL1_EL1_GAP_STOP_REQ when there is no gap usage in EUTRAN..
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* current_time - current time in EL1
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ eutran_time_struct current_time;
+}el1_ll1_gap_stop_cnf_struct;
+
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_auto_gap_req_struct
+*
+* DESCRIPTIONS
+* EL1 sends this message to request LL1 that EL1 wants to use the auto gap from (sfn, sub_frame, half_sample).
+* EL1 could use this auto gap after getting the successful confirm
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* auto_time - Start time of auto gap in EL1
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ eutran_time_struct auto_time;
+}el1_ll1_auto_gap_req_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_el1_auto_gap_cnf_struct
+*
+* DESCRIPTIONS
+* LL1 sends this message to confirm EL1 auto gap request.
+* After receiving this message, EL1 could use required auto gap.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* success - KAL_TRUE : EL1 could use auto gap to search
+* KAL_FALSE: EL1 could not use auto gap to search.
+* And GL1 should not request auto gap until AUTO_GAP_AVAILABLE_IND
+* valid_period - The length of autonomous gap allowed by active RAT
+* The value is valid when success = KAL_TRUE
+* Unit : sample
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ kal_bool success;
+ kal_int64 valid_period;
+}ll1_el1_auto_gap_cnf_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_el1_auto_gap_ind_struct
+*
+* DESCRIPTIONS
+* LL1 sends this message to inform EL1 stopping using RF in this auto gap from (sfn, sub_frame, half_sample).
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* auto_time - Start time of auto gap
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ eutran_time_struct auto_time;
+}ll1_el1_auto_gap_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_auto_gap_res_struct
+*
+* DESCRIPTIONS
+* EL1 sends this message to response LL1 that EL1 will/won't use RF from
+* the start timing of auto gap which is informed by LL1_EL1_auto_GAP_IND.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* success - KAL_TRUE : EL1 will not use RF from the starting time of LL1_EL1_AUTO_GAP_IND
+* KAL_FALSE: EL1 may use RF after starting time of LL1_EL1_AUTO_GAP_IND.
+* valid_period - The length of autonomous gap allowed in EL1
+* The value is valid when EL1 is active rat and success = KAL_TRUE
+* Unit : sample
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ kal_bool success;
+ kal_int64 valid_period;
+}el1_ll1_auto_gap_res_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_el1_gap_notify_ind_struct
+*
+* DESCRIPTIONS
+* LL1 sends this message to inform EL1 that the starting time and length of gap pattern.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+* standby_gap - standby gap pattern
+* active_gap - active gap pattern configuration
+* tid - tid for lastest meas_req on
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ ll1_el1_expand_gap_pattern_struct standby_gap;
+ ll1_eutran_gap_config_struct active_gap;
+ kal_uint8 tid; /* Tid for lastest meas_req on, LL1 will expand gap notify ind with this tid*/
+}ll1_el1_gap_notify_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* el1_ll1_gap_pattern_ind_struct
+*
+* DESCRIPTIONS
+* EL1 sends this message to inform LL1 that the free RF period in EL1 as gap pattern.
+* PARAMETERS
+* LOCAL_PARA_HDR
+* el1_current_time - EL1 current time
+* drx_gap - No matter the length is bigger than zero or not, EL1 should send
+* this message and sets is_drx_tick = KAL_TRUE in one DRX period once.
+* connect_gap - GP0 or GP1
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+ eutran_time_struct el1_current_time;
+ eutran_drx_gap_struct drx_gap;
+ eutran_connect_gap_struct connect_gap;
+}el1_ll1_gap_pattern_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* ll1_el1_sync_req_struct
+* el1_ll1_gap_stop_req_struct
+* ll1_el1_gap_stop_cnf_struct
+* ll1_el1_gap_stop_req_struct
+* el1_ll1_gap_stop_cnf_struct
+* el1_ll1_gap_suspend_req_struct
+* ll1_el1_gap_suspend_cnf_struct
+* ll1_el1_gap_suspend_req_struct
+* el1_ll1_gap_suspend_cnf_struct
+* el1_ll1_gap_resume_ind_struct
+* ll1_el1_gap_resume_ind_struct
+* el1_ll1_auto_gap_stop_req_struct
+* ll1_el1_auto_gap_stop_ind_struct
+* el1_ll1_auto_gap_stop_res_struct
+* ll1_el1_auto_gap_stop_cnf_struct
+* el1_ll1_auto_gap_end_ind_struct
+* ll1_el1_auto_gap_end_ind_struct
+* el1_ll1_auto_gap_available_ind_struct
+* ll1_el1_auto_gap_available_ind_struct
+*
+* DESCRIPTIONS
+* ll1_el1_sync_req_struct
+* LL1 will use this primitive to get EL1 current UMTS timing and micro
+* second counter value in both EL1 in active and standby mode.
+*
+* el1_ll1_gap_stop_req_struct
+* EL1 uses this primitive to inform LL1 to stop all gap usage in standby
+* RAT when GERAN GSM wants to change configuration or other purposes.
+*
+* ll1_el1_gap_stop_cnf_struct
+* LL1 uses this primitive to confirm EL1 that LL1 has already stopped
+* all gap usages in standby RAT and EL1 could use all RF time.
+*
+* ll1_el1_gap_stop_req_struct
+* LL1 uses this primitive to stop gap usage in EUTRAN when EUTRAN is standby RAT.
+*
+* el1_ll1_gap_stop_cnf_struct
+* EL1 uses this primitive to confirm LL1_EL1_GAP_STOP_REQ when there is no gap usage in EUTRAN.
+*
+* el1_ll1_gap_suspend_req_struct
+* EL1 uses this primitive to temporal suspend gap usage in standby RAT for higher priority
+* task and doesn't need to give new gap configuration in connection mode when resumed.
+*
+* ll1_el1_gap_suspend_cnf_struct
+* LL1 sends this confirm message to EL1 after all standby RAT gap usage are suspended.
+*
+* ll1_el1_gap_suspend_req_struct
+* LL1 sends this message to EL1 to request that EL1 suspends RF usage immediately.
+*
+* el1_ll1_gap_suspend_cnf_struct
+* EL1 sends this message to confirm LL1 that EL1 will not use gap from
+* now to receiving resume indicator
+*
+* el1_ll1_gap_resume_ind_struct
+* EL1 sends this message to inform LL1 that EL1 has already finished
+* higher priority task, and standby RAT could use gap normally.
+*
+* ll1_el1_gap_resume_ind_struct
+* LL1 sends this message to EL1 to resume EL1's gap usage.
+* After receiving this message, EL1 could use gap pattern normally.
+*
+* el1_ll1_auto_gap_stop_req_struct
+* EL1 sends this message to request LL1 that EL1 wants to
+* retrieve auto gap for higher priority task.
+*
+* ll1_el1_auto_gap_stop_ind_struct
+* LL1 sends this message to inform EL1 of stopping using RF
+* during auto gap period.
+*
+* el1_ll1_auto_gap_stop_res_struct
+* EL1 sends this message to response LL1 that EL1 stops
+* auto gap usage.
+*
+* ll1_el1_auto_gap_stop_cnf_struct
+* LL1 sends this message to confirm that EL1 could use RF now.
+*
+* el1_ll1_auto_gap_end_ind_struct
+* EL1 sends this message to inform LL1 that auto gap usage is finished.
+*
+* ll1_el1_auto_gap_end_ind_struct
+* LL1 sends this message to inform EL1 that auto gap usage is finished.
+*
+* el1_ll1_auto_gap_available_ind_struct
+* EL1 sends this message to inform LL1 that auto gap is available now. Standby RAT
+* could request auto gap now. Standby RAT could request auto gap now
+*
+* ll1_el1_auto_gap_available_ind_struct
+* LL1 sends this message to inform EL1 that auto gap
+* is available now. EL1 could request auto gap now.
+*
+* el1_ll1_auto_gap_unavailable_ind_struct
+* EL1 sends this message to inform LL1 that auto gap is unavailable now.
+* Standby RAT could not request auto gap now.
+*
+* ll1_el1_auto_gap_unavailable_ind_struct
+* LL1 sends this message to inform EL1 that auto gap is unavailable now.
+* EL1 could not request auto gap now.
+*
+* PARAMETERS
+* LOCAL_PARA_HDR
+*****************************************************************************/
+typedef struct
+{
+ LOCAL_PARA_HDR
+}ll1_el1_sync_req_struct,
+ el1_ll1_gap_stop_req_struct,
+ ll1_el1_gap_stop_cnf_struct,
+ ll1_el1_gap_stop_req_struct,
+ el1_ll1_gap_suspend_req_struct,
+ ll1_el1_gap_suspend_cnf_struct,
+ ll1_el1_gap_suspend_req_struct,
+ el1_ll1_gap_suspend_cnf_struct,
+ el1_ll1_gap_resume_ind_struct,
+ ll1_el1_gap_resume_ind_struct,
+ el1_ll1_auto_gap_stop_req_struct,
+ ll1_el1_auto_gap_stop_ind_struct,
+ el1_ll1_auto_gap_stop_res_struct,
+ ll1_el1_auto_gap_stop_cnf_struct,
+ el1_ll1_auto_gap_end_ind_struct,
+ ll1_el1_auto_gap_end_ind_struct,
+ el1_ll1_auto_gap_available_ind_struct,
+ ll1_el1_auto_gap_available_ind_struct,
+ el1_ll1_auto_gap_unavailable_ind_struct,
+ ll1_el1_auto_gap_unavailable_ind_struct;
+
+/*****************************************************************************
+* STRUCT
+* mll1_el1_info_database_struct
+*
+* DESCRIPTIONS
+* EL1 information structure.
+*
+* PARAMETERS
+*
+*****************************************************************************/
+typedef struct
+{ /* measure req*/
+ kal_uint8 tick_bmp; /* use to record tick bitmap*/
+ kal_uint8 rank_tick_tid; /* tid for rank tick*/
+ kal_uint8 prio_tick_tid; /* tid for prio tick*/
+ kal_uint8 meas_done_bmp; /* measurement done ind bitmap*/
+ kal_bool is_meas_done_useful; /* eutran uses meas_done or not by checking meas_purpose_bmp*/
+ kal_uint8 meas_purpose_bitmap; /* record the measure purpose bitmap*/
+ eutran_time_struct current_time; /* eutran current time when request gap service*/
+ /* Paging period in active RAT */
+ kal_int32 drx_cycle; /* 80,160,350,640,1280,2560,5120 Unit : ms*/
+ /* Store gap information*/
+ el1_ll1_gap_pattern_ind_struct gap_pattern; /* store gap pattern ilm*/
+ /* auto gap para*/
+ eutran_time_struct auto_time; /* auto gap time*/
+ /* Mode status*/
+ ll1_active_rat_mode_status_enum mode_status; /* mode status*/
+ /* Gap request from standby rat should do sync in connection*/
+ kal_bool valid_timing; /* KAL_TRUE : sync not finish after request*/
+ /* KAL_FALSE : sync done*/
+ kal_uint8 meas_req_tid; /* Tid for lastest meas_req on, LL1 will expand gap notify ind with this tid*/
+}mll1_el1_info_database_struct;
+#if 0
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+/* under construction !*/
+#endif /*__POP_FSM__*/
+/*****************************************************************************
+* GLOBAL FUNCTIONS
+*****************************************************************************/
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_auto_gap_available_ind
+* DESCRIPTION
+* ll1 sends auto gap available ind to EUTRAN now
+*
+* PARAMETERS
+* kal_bool available
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_auto_gap_available_ind(kal_bool available);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_auto_gap_cnf
+* DESCRIPTION
+* ll1 sends auto gap cnf to EUTRAN now
+*
+* PARAMETERS
+* success - success or not
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_auto_gap_cnf(kal_bool success, kal_int64 valid_period);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_auto_gap_end_ind
+* DESCRIPTION
+* ll1 sends auto gap end ind to EUTRAN now
+*
+* PARAMETERS
+* none
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_auto_gap_end_ind(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_auto_gap_ind
+* DESCRIPTION
+* ll1 sends auto gap ind to EUTRAN now
+*
+* PARAMETERS
+* eutran_time - auto time
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_auto_gap_ind(eutran_time_struct eutran_time);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_auto_gap_stop_cnf
+* DESCRIPTION
+* ll1 sends auto gap stop cnf to EUTRAN now
+*
+* PARAMETERS
+* None
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_auto_gap_stop_cnf(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_auto_gap_stop_ind
+* DESCRIPTION
+* ll1 sends auto gap stop ind to EUTRAN now
+*
+* PARAMETERS
+* None
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_auto_gap_stop_ind(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_auto_time_minus
+* DESCRIPTION
+* Add more rf margin for any standby rat which will enter sleep during autonomous serch procedure
+* Assume margin is smaller than one sfn
+* PARAMETERS
+* eutran_time_struct*
+* kal_int64 - more RF margin (recovery from sleep).
+* RETURNS
+* void
+*****************************************************************************/
+void mll1_el1_auto_time_minus(eutran_time_struct* time, kal_int64 sample);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_expand_active_gap_pattern_ind
+* DESCRIPTION
+* ll1 sends active gap pattern ind to EUTRAN now
+*
+* PARAMETERS
+* start_time - the first gap start time
+* use_num - how many 480ms period el1 could use
+* skip_num - how many 480ms period el1 should skip after use use_cnt 480ms period.
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_expand_active_gap_pattern_ind(eutran_time_struct* start_time,kal_uint8 use_num,kal_uint8 skip_num);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_expand_gap_pattern_ind
+* DESCRIPTION
+* ll1 sends auto gap available ind to EUTRAN now
+*
+* PARAMETERS
+* none
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_expand_gap_pattern_ind(ll1_el1_expand_gap_pattern_struct* standby_gap);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_gap_resume_ind
+* DESCRIPTION
+* LL1 sends this message to EL1 to resume EL1 gap usage.
+* After receiving this message, EL1 could use gap pattern normally.
+*
+* PARAMETERS
+* none
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_gap_resume_ind(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_gap_service_request
+* DESCRIPTION
+* ll1 sends gap service req to EUTRAN now
+*
+* PARAMETERS
+* enable - KAL_TRUE : turn on gap service
+* - KAL_FALSE : turn off gap service
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_gap_service_req(kal_bool enable);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_gap_stop_cnf
+* DESCRIPTION
+* LL1 uses this primitive to confirm EL1 that LL1 has already stopped
+* all gap usages in standby RAT and EL1 could use all RF time.
+*
+* PARAMETERS
+* NONE
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_gap_stop_cnf(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_gap_stop_req
+* DESCRIPTION
+* LL1 uses this primitive to stop gap usage in EUTRAN when EUTRAN is standby RAT.
+*
+* PARAMETERS
+* NONE
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_gap_stop_req(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_gap_suspend_cnf
+* DESCRIPTION
+* LL1 sends this confirm message to EL1 after gap usage in standby RAT is suspended.
+* EL1 could use RF only after getting this message.
+*
+* PARAMETERS
+* NONE
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_gap_suspend_cnf(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_gap_suspend_req
+* DESCRIPTION
+* LL1 uses this primitive to suspend gap usage in EUTRAN when EUTRAN is standby RAT.
+*
+* PARAMETERS
+* NONE
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_gap_suspend_req(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_auto_time
+* DESCRIPTION
+* return auto time from EL1
+*
+* PARAMETERS
+* None
+* RETURNS
+* eutran_time_struct auto_time
+*****************************************************************************/
+eutran_time_struct mll1_el1_get_auto_time(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_current_time
+* DESCRIPTION
+* ll1 gets current time + ahead margin to expand gap
+*
+* PARAMETERS
+* eutran_time - start time of expansion period
+* kal_bool is_ahead_time
+* TRUE : advance eutran_time with the predefined ahead_time
+* FALSE: don't advance eutran_time with the predefined ahead_time
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+extern void mll1_el1_get_current_time(eutran_time_struct* eutran_time, kal_bool is_ahead_time);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_el1_rf_margin
+* DESCRIPTION
+* EL1 gets RF margin in current state
+*
+* PARAMETERS
+* head - header_margin
+* tail - tail_margin
+* RETURNS
+* none
+*****************************************************************************/
+void mll1_el1_get_el1_rf_margin(kal_int32* head,kal_int32* tail);
+#ifdef __GSM_RAT__
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_gl1_rf_margin
+* DESCRIPTION
+* EL1 gets GL1 RF margin in current state
+*
+* PARAMETERS
+* head - header_margin
+* tail - tail_margin
+* RETURNS
+* none
+*****************************************************************************/
+void mll1_el1_get_gl1_rf_margin(kal_int32* head,kal_int32* tail);
+#endif /*__GSM_RAT__*/
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_timing_status
+* DESCRIPTION
+*
+* PARAMETERS
+* RETURNS
+* kal_bool - valid_timing KAL_TRUE : means still sync. cant be expanded
+* KAL_FALSE : means sync. done
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+kal_bool mll1_el1_get_timing_status(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_mode_status
+* DESCRIPTION
+* return mode status from EL1
+*
+* PARAMETERS
+* None
+* RETURNS
+* ll1_active_rat_mode_status_enum mode_status
+*****************************************************************************/
+ll1_active_rat_mode_status_enum mll1_el1_get_mode_status(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_t_abort
+* DESCRIPTION
+* Tidentify,gsm / Treconfirm,gsm uint: ms
+*
+* PARAMETERS
+* carriers_other_than_gsm - Number of carriers other than GSM
+*
+* RETURNS
+* kal_uint32 t_abort;
+*****************************************************************************/
+kal_uint32 mll1_el1_get_t_abort(kal_uint8 carriers_other_than_gsm, kal_bool is_identify);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_tick_count
+* DESCRIPTION
+* EL1 tick number
+*
+* PARAMETERS
+* is_prio_search - KAL_FALSE : ll1_main wants to get meas. tick
+* KAL_TRUE : ll1_main wants to get prio. tick
+* t_hps - 60 (uint : second)
+*
+* RETURNS
+* kal_uint32 count;
+*****************************************************************************/
+kal_uint32 mll1_el1_get_tick_count(kal_bool is_prio_search, kal_uint16 t_hps);
+
+#ifdef __UMTS_RAT__
+#ifdef __UMTS_TDD128_MODE__
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_tl1_rf_margin
+* DESCRIPTION
+* EL1 gets TL1 RF margin in current state
+*
+* PARAMETERS
+* head - header_margin
+* tail - tail_margin
+* RETURNS
+* none
+*****************************************************************************/
+void mll1_el1_get_tl1_rf_margin(kal_int32* head,kal_int32* tail);
+#endif /*__UMTS_TDD128_MODE__*/
+#ifdef __UMTS_FDD_MODE__
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_get_ul1_rf_margin
+* DESCRIPTION
+* EL1 gets UL1 RF margin in current state
+*
+* PARAMETERS
+* head - header_margin
+* tail - tail_margin
+* RETURNS
+* none
+*****************************************************************************/
+void mll1_el1_get_ul1_rf_margin(kal_int32* head,kal_int32* tail);
+#endif /*__UMTS_FDD_MODE__*/
+#endif /*__UMTS_RAT__*/
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_handle_gap_margin_in_connect
+* DESCRIPTION
+* EL1 handle gap margin in connection mode
+*
+* PARAMETERS
+* *st - gap starting time
+* *length - gap length in sample
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_handle_gap_margin_in_connect(eutran_time_struct* st, kal_int32* length);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_is_before_dest_time
+* DESCRIPTION
+* check if gap start time is before dest time,
+*
+* PARAMETERS
+* src - gap start time
+* dest - expand start time
+* RETURNS
+* kal_bool - KAL_TRUE : means that src is before dest time
+* KAL_FALSE : means that dest is before src time
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+kal_bool mll1_el1_is_before_dest_time(eutran_time_struct* src,eutran_time_struct* dest);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_is_in_connect_gp1
+* DESCRIPTION
+* use to check if el1 is in connect gp1 configuration
+*
+* PARAMETERS
+*
+* RETURNS
+* kal_bool - KAL_TRUE : with GP1 configuration
+* KAL_FALSE : without GP1 configuration
+*****************************************************************************/
+kal_bool mll1_el1_is_in_connect_gp1(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_is_lower_pwr_on
+* DESCRIPTION
+* Check if el1 is low pwr on
+*
+* PARAMETERS
+*
+* RETURNS
+* kal_bool - KAL_FALSE : measurement is not finished and need gap in this period
+* KAL_TRUE : measurement is finished and doesnt need gap in this period
+*****************************************************************************/
+kal_bool mll1_el1_is_lower_pwr_on(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_mode_status_update_ind
+* DESCRIPTION
+* This message is sent to EL1 for informing that mode status of active RAT when EL1 is standby RAT.
+* This message should be updated for EL1 in standby when any mode status changed in active RAT.
+*
+* PARAMETERS
+* status - mode status in active RAT
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_mode_status_update_ind(ll1_active_rat_mode_status_enum status);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_set_timing_status
+* DESCRIPTION
+*
+* PARAMETERS
+* flag - set valid_timing = flag
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_set_timing_status(kal_bool flag);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_sync_time_req
+* DESCRIPTION
+* When timing synchronization procedure is triggered, mll1 will decide which rat should do
+* timing synchronization based on the result of g_ll1_flight_rat|| g_ll1_standby_rat || g_ll1_active_rat.
+*
+* PARAMETERS
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_sync_time_req(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_time_add
+* DESCRIPTION
+* This function is used to add samples to time
+*
+* PARAMETERS
+* time - basic time
+* samples - samples
+* RETURNS
+* none
+*****************************************************************************/
+void mll1_el1_time_add( eutran_time_struct* time, kal_int32 samples);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_update_current_time
+* DESCRIPTION
+* ll1 updates current after timing sync done
+*
+* PARAMETERS
+* eutran_time - current time
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_update_current_time(eutran_time_struct* eutran_time);
+
+/*****************************************************************************
+* CALL FUNCTION PROTOTYPE
+* mll1_eutran_handler()
+*
+* DESCRIPTION
+* Function to handle the primitive from EL1.
+*
+* PARAMETERS
+* current_ilm - primitive from EL1.
+*
+* RETURN
+* None
+*****************************************************************************/
+void mll1_eutran_handler(void *ptr_ilm);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_tick_el1_gap_expansion
+* DESCRIPTION
+* tick el1 to expand gap when sync done
+*
+* PARAMETERS
+* none
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_tick_el1_gap_expansion(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_el1_info_init
+* DESCRIPTION
+* Initialize el1 internal global variable
+*
+* PARAMETERS
+* none
+* RETURNS
+* none
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+void mll1_el1_info_init(void);
+
+/*****************************************************************************
+* FUNCTION
+* mll1_tl1_gap_pattern_timing_checking
+* DESCRIPTION
+* check if the pending gap is out of date or not
+*
+* PARAMETERS
+* eutran_time - el1 timing correspond to some standby rat's timing indicated in measure request
+* RETURNS
+* TRUE - the pending gap has not been out of date
+* FALSE - the pending gap has been out of date
+* GLOBALS AFFECTED
+* none
+*****************************************************************************/
+kal_bool mll1_el1_gap_pattern_timing_checking(eutran_time_struct eutran_time);
+
+#endif /*_MLL1_EUTRAN_H*/