[Feature][Modem]Update MTK MODEM V1.6 baseline version: MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6
MTK modem version: MT2735_IVT_MOLY.NR15.R3.MD700.IVT.MP1MR3.MP.V1.6.tar.gz
RF modem version: NA
Change-Id: I45a4c2752fa9d1a618beacd5d40737fb39ab64fb
diff --git a/mcu/protocol/interface/general/sm2mm_struct.h b/mcu/protocol/interface/general/sm2mm_struct.h
new file mode 100644
index 0000000..6dd4cf9
--- /dev/null
+++ b/mcu/protocol/interface/general/sm2mm_struct.h
@@ -0,0 +1,296 @@
+/*****************************************************************************
+* Copyright Statement:
+* --------------------
+* This software is protected by Copyright and the information contained
+* herein is confidential. The software may not be copied and the information
+* contained herein may not be used or disclosed except with the written
+* permission of MediaTek Inc. (C) 2005
+*
+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
+*
+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+*
+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
+*
+*****************************************************************************/
+/*****************************************************************************
+ *
+ * Filename:
+ * ---------
+ * sm2mm_struct.h
+ *
+ * Project:
+ * --------
+ * MAUI
+ *
+ * Description:
+ * ------------
+ * This file describes the common structure of SM and MM.
+ *
+ * Author:
+ * -------
+ * -------
+ *
+ *============================================================================
+ * HISTORY
+ * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *------------------------------------------------------------------------------
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ * removed!
+ * removed!
+ * removed!
+ *
+ *------------------------------------------------------------------------------
+ * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
+ *==============================================================================
+ *******************************************************************************/
+
+/********************************************************************************
+* Copyright Statement:
+* --------------------
+*
+* This product has been developed using a protocol stack
+* developed by Sasken Communication Technologies Limited.
+*
+********************************************************************************/
+
+#ifndef _SM2MM_STRUCT_H
+#define _SM2MM_STRUCT_H
+
+#include "kal_general_types.h"
+#include "kal_public_defs.h"
+#include "l3_inc_enums.h"
+#include "mcd_l3_inc_gprs_struct.h"
+#include "as2nas_struct.h"
+#include "irat_common_struct.h"
+#include "smmm_enums.h"
+
+typedef struct {
+ LOCAL_PARA_HDR
+ qos_struct qos;
+ kal_uint32 tlli;
+ rp_enum radio_priority;
+ est_cause_enum cause;
+ kal_uint8 pkt_flow_identifier;
+ peer_msg_id_struct peer_msg_id;
+} gmmsm_unitdata_req_struct;
+
+typedef struct {
+ LOCAL_PARA_HDR
+ kal_uint16 nsapi_status;
+ traffic_class_enum max_traffic_class; // the highest quality traffic class among all active PDP context
+} gmmsm_nsapi_status_req_struct;
+
+typedef struct {
+ /** ILM specific header. */
+ LOCAL_PARA_HDR
+
+ /** used to indicate nas priority config, used if __MTC_SUPPORT__ */
+ nas_priority_config_enum nas_priority_config ;
+
+ /** used to indicate eab override, used if __MTC_SUPPORT__ */
+ eab_override_config_enum eab_override_config ;
+} gmmsm_dual_priority_config_req_struct;
+
+#ifdef __GEMINI__
+typedef struct {
+ LOCAL_PARA_HDR
+ kal_uint8 retry_count;
+ gmmsm_pdp_session_procedure_type_enum session_proc_type;
+} gmmsm_session_begin_req_struct;
+
+typedef struct {
+ LOCAL_PARA_HDR
+ gmmsm_pdp_session_procedure_type_enum session_proc_type;
+} gmmsm_session_end_req_struct;
+#endif
+
+typedef struct {
+ LOCAL_PARA_HDR
+ est_cause_enum cause;
+} gmmsm_attach_req_struct;
+
+typedef struct {
+ LOCAL_PARA_HDR
+ est_cause_enum cause;
+} gmmsm_est_req_struct;
+
+#ifdef __SM_UT__
+typedef struct {
+ LOCAL_PARA_HDR
+ kal_uint8 sm_calculate_mt_procedure_pdp_number_result;
+ kal_uint8 sm_calculate_mo_procedure_pdp_number_result;
+ kal_uint32 sm_calculate_how_many_pdp_are_used_result;
+} sm_test_sm_calculate_how_many_pdp_are_used_struct;
+
+#endif // ~ #ifdef __SM_UT__
+
+/**
+ * According to Multimode interRAT message processing rules,
+ * the receiving module, said... the MOD_A, need to process this message in the following way
+ * - (1) Relay this interRAT message to next module, said... the MOD_B, first
+ * - (2) then MOD_A can start to do processing of this message
+ * because when a RD designs a new MM iRAT feature, he/she will assume others process these messages in this way
+ * this rules make sures the interRAT message flow is as expected
+ */
+typedef struct {
+ LOCAL_PARA_HDR
+ irat_type_enum irat_type; //Indicates the inter-RAT type
+ rat_type_enum source_rat; //Source RAT
+ rat_type_enum target_rat; //Target RAT
+ irat_result_enum irat_result; //The result of inter-RAT change
+ void* as_info_ptr; //The pointer of AS container information
+} gmmsm_rat_change_rsp_struct; // (23G4 finish)
+
+/**
+ * According to Multimode interRAT message processing rules,
+ * the receiving module, said... the MOD_A, need to process this message in the following way
+ * - (1) Relay this interRAT message to next module, said... the MOD_B, first
+ * - (2) then MOD_A can start to do processing of this message
+ * because when a RD designs a new MM iRAT feature, he/she will assume others process these messages in this way
+ * this rules make sures the interRAT message flow is as expected
+ */
+typedef struct {
+ LOCAL_PARA_HDR
+ irat_type_enum irat_type; //Indicates the inter-RAT type
+ rat_type_enum source_rat; //Source RAT (GAS or UAS)
+ rat_type_enum target_rat; //Target RAT (Should be EAS)
+ kal_bool esm_deactivate_isr; //ESM sets this flag if ESM bearer has been added or modified after ISR was activated
+ kal_uint16 nsapi_status; //PDP context status
+
+ /** Bit-array of nas-priority for all nsapi.
+ * - Bit sequence: (high)nsapi-15 - (low)nsapi-0
+ * - 0: Already or ready-to use "low priority"
+ * - 1: Already or ready-to use "normal priority"
+ * - If not specified by user: Use 1 (normal priority) by default
+ */
+ kal_uint16 nas_priority_status;
+
+ /** Bit-array of eab-override for all nsapi.
+ * - Bit sequence: (high)nsapi-15 - (low)nsapi-0
+ * - 0: Already or ready-to use "not override"
+ * - 1: Already or ready-to use "can override"
+ * - If not specified by user: Use 0 (not override) by default
+ */
+ kal_uint16 eab_override_status;
+
+ traffic_class_enum max_traffic_class; // the highest quality traffic class among all active PDP context
+
+ emm2mm_irat_info_struct emm_info;
+
+ void* as_info_ptr; //Indicates the address of the activation request for RAT change to LTE, the information is dedicated for AS.
+ //The buffer will be freed by soure or target AS
+} gmmsm_rat_change_req_struct; // (4G23 start)
+
+typedef struct {
+ LOCAL_PARA_HDR
+ // check L4_NAS_RAT_CHANGE_SAP.docx for detail
+} gmmsm_isr_deactivate_req_struct;
+
+
+typedef struct {
+ LOCAL_PARA_HDR
+ gmmsm_event_report_type_enum event;
+} gmmsm_event_report_req_struct;
+
+#endif
+
+